Professional Documents
Culture Documents
MODULE-28C
Analysis of statically indeterminate structures by force methods.
.__________________________________________________________________________
_
Ans: (b)
JH ACADEMY Page 1
SUB: STRUCTURAL ANALYSIS
MODULE-28C
2. The degree of static indeterminacy, , and the degree of kinematic
indeterminacy, , for the plane frame shown below, assuming
axial deformations to be negligible, given by
(A)
(B)
(C)
(D)
Ans:
(A) (B)
(C) (D)
Ans:
JH ACADEMY Page 2
SUB: STRUCTURAL ANALYSIS
MODULE-28C
4. For the linear elastic beam shown in the figure, the flexural rigidity.
EI, is 781250 kN-m2. When w = 10 kN/m, the vertical reaction
RA at A is 50 kN. The value of RA for w = 100 kN/m is
Ans:
Ans:
Ans: (d)
JH ACADEMY Page 3
SUB: STRUCTURAL ANALYSIS
MODULE-28C
7. A three-span continuous beam has a internal hinge at B Section B
is at the mind-span of AC. Section R is at the mid-span of CG. The
20 kN load is applied at section B whereas 10 kN loads are applied
at sections D and F as shown in the figure. Span GH is subjected to
uniformly distributed load of magnitude 5 kN/m. For the loading
shown, shear force immediate to the right of section E is 9.84 kN
upwards and the sagging moment at section E is 10.31 kN-m.
Ans:
Ans:
JH ACADEMY Page 4
SUB: STRUCTURAL ANALYSIS
MODULE-28C
Ans:
Ans:
KN
JH ACADEMY Page 5
SUB: STRUCTURAL ANALYSIS
MODULE-28C
11. Consider a propped cantilever beam ABC under two loads of
magnitude P each as shown in the figure below. Flexural rigidity of
the beam is EI.
The reaction at C is
(a) (upwards)
(b) (downwards)
(c) (upwards)
(d) (downwards)
Ans:
( )
( )
JH ACADEMY Page 6
SUB: STRUCTURAL ANALYSIS
MODULE-28C
12. Consider a propped cantilever beam ABC under two loads of
magnitude P each as shown in the figure below. Flexural rigidity of
the beam is EI.
The rotation at B is
(a) (clockwise)
(b) (anticlockwise)
(c) (clockwise)
(d) (anticlockwise)
Ans:
( )
( )
JH ACADEMY Page 7
SUB: STRUCTURAL ANALYSIS
MODULE-28C
13. The right triangular truss is made of members having equal cross
sectional area of 1550 mm2 and Youngs modulus of 2 105 MPa.
The horizontal deflection of the joint Q is
Ans:
135
So the reaction at P =
( )
( )
( )
( )
We get ( )
( )
( )
= 15.68 mm
JH ACADEMY Page 8
SUB: STRUCTURAL ANALYSIS
MODULE-28C
14. A two span continuous beam having equal spans each of length L
is subjected to a uniformly distributed load w per unit length. The
beam has constant flexural rigidly.
The reaction at the middle support is
Ans:
( ) ( )
R=
JH ACADEMY Page 9
SUB: STRUCTURAL ANALYSIS
MODULE-28C
15. A two span continuous beam having equal spans each of length L
is subjected to a uniformly distributed load w per unit length. The
beam has constant flexural rigidly.
The bending moment at the middle support is
Ans:
2 ( )
( )
=( )
= (- ) (Hogging)
16. The degree of static indeterminacy of the rigid frame having two
internal hinges as shown in the figure below, is
Ans: (D)
JH ACADEMY Page 10
SUB: STRUCTURAL ANALYSIS
MODULE-28C
17. The members EJ and IJ of a steel truss shown in the figure below
are subjected to a temperature rise of 30 C. The coefficient of
thermal expansion of steel is 0.000012 per C per unit length. The
displacement (mm) of joint E relative to joint H along the direction
HE of truss, is
(A) 0.255
(B) 0.589
(C) 0.764
(D) 1.026
Ans:
( )
3000
Ans:
JH ACADEMY Page 11
SUB: STRUCTURAL ANALYSIS
MODULE-28C
19. Beam GHI is supported by three pontoons as shown in the figure
below. The horizontal cross-sectional area of each pontoon is 8 m2,
the flexural rigidity of the beam is 10000 kN-m2 and the unit
weight of water is 10 kN/m3
Ans:
( ) ( )
( )
( )
( )
( )
( )
Ans: C
JH ACADEMY Page 12
SUB: STRUCTURAL ANALYSIS
MODULE-28C
21. In the cantilever beam PQR shown in figure below, the segment
PQ has flexural rigidity EI and the segment QR has infinite flexural
rigidity.
(C) (D)
Ans:
* +
( ) ( )] ( )]
( ) ( )]
( )
Put p=0
JH ACADEMY Page 13
SUB: STRUCTURAL ANALYSIS
MODULE-28C
( )( )
( )
( )
[ ]
[ ] [ ]
( ) ] ( )]
( ) ]
Put M=0
= ( ) * +
* +
JH ACADEMY Page 14
SUB: STRUCTURAL ANALYSIS
MODULE-28C
22. In the cantilever beam PQR shown in figure below, the segment
PQ has flexural rigidity EI and the segment QR has infinite flexural
rigidity.
Ans:
( )] ( )]
( )
( )
[ ]
* ( )+
* +
= ]
JH ACADEMY Page 15
SUB: STRUCTURAL ANALYSIS
MODULE-28C
23. A simply supported beam is subjected to a uniformly distributed
load of intensity w per unit length, on half of the span from one
end. The length of the span and the flexural stiffness are denoted as
l and EI, respectively. The deflection at mid-span of the beam is
(A) (B)
(C) (D)
Ans:
24. Due to some point load anywhere on a fixed beam, the maximum
free bending moment is M. the sum of fixed end moments is
a) M b) 1.5 M
c) 2.0 M d) 3.0 M
Ans:
( )
25. Match list-I (fixed beam and various types of loading) with list-II
(the moments at A) and select the correct answer using the codes
below the lists:
Codes:
A B C D
a) 4 3 1 2
b) 3 4 1 2
c) 4 3 2 1
d) 3 4 2 1
Ans: (A)
JH ACADEMY Page 16
SUB: STRUCTURAL ANALYSIS
MODULE-28C
26. The moment at the indeterminate support of a two-span continuous
beam of 6 m each with simple support at the ends carrying a udl of
20 kN/m over only the left span is (flexural rigidity is the same for
both the spans)
a) 90kN m hogging
b) 45kN m hogging
c) 45kN m sagging
d) Zero
Ans:
Ans:
R = 150 KN
-M (Hogging)
JH ACADEMY Page 17
SUB: STRUCTURAL ANALYSIS
MODULE-28C
28. If a point load acting at the mid-span of a fixed beam of uniform
section produces fixed end moments of 60 kN-m, then the same
load spread uniformly over the entire span will produce fixed end
moments equal to
a) 20kN-m b) 30kN-m
c)40kN-m c) 45kN-m
Ans:
29. For the beam AB shown in the figure, the fixed end moments at
ends A and B will be respectively
Ans:
JH ACADEMY Page 18
SUB: STRUCTURAL ANALYSIS
MODULE-28C
30. For the frame shown in the figure, the distribution factors for
members CB,CD and CG are respectively (Assume EL as constant)
a) , and
b) , and
c) , and
d) , and
Ans:
CB CA CD
Sum = + + =
Ans: (C)
JH ACADEMY Page 19
SUB: STRUCTURAL ANALYSIS
MODULE-28C
32. Match list-I with List-II with respect to the diagram given below
and select the correct answer using the codes given below the lists:
List-I
a) moment at B
b) slope at A
c) reaction at A
d) stiffness of AB
List-II
1. 3/8wL
2.
3. 1.50 M where M =
4. where M =
Codes:
A B C D
a) 2 1 4 3
b) 3 1 4 2
c) 3 4 1 2
d) 2 4 1 3
Ans:
Moment at B =
Slope at A =
= ( )
= ( )
Stiffness of AB =
JH ACADEMY Page 20
SUB: STRUCTURAL ANALYSIS
MODULE-28C
33. A uniform beam of length 2L and flexural rigidity EI id fixed at
both the ends. What is the moment required for unit rotation at the
centre of span?
a) b)
c) d)
Ans:
Ans:
If heaves up
) d) Zero
Ans:
JH ACADEMY Page 21
SUB: STRUCTURAL ANALYSIS
MODULE-28C
36. What are the bending moments at the ends A and B of a uniform
beam AB fixed in direction and position at A and B when acted
upon by two concentrated loads at 1/3rd span as shown in the figure
below?
a) 2/9 WL
b) 4/9 WL
c) 6/9 WL
d) 8/9 WL
Ans:
( )( ) ( )( )
=)
=) * +
=)
37. What is the ratio of load carrying capacity of a fixed beam to that
of a cantilever beam of same span, having same maximum bending
moment and loaded with uniformly distributed throughout the
span?
a) 6 b) 4 c) 3 d) 2
Ans:
Ratio =
JH ACADEMY Page 22
SUB: STRUCTURAL ANALYSIS
MODULE-28C
38. The propped cantilever AB carries a uniformly distributed load of
q/unit length. In this condition the moment reaction =
c) d)
Ans:
( )
39. The fixed beam AB has a hinge C at mid span. A concentrated load
P is applied at C. what is the fixed end moment ?
a) PL b) Pl/2
c) PL/4 d) PL/8
Ans:
JH ACADEMY Page 23
SUB: STRUCTURAL ANALYSIS
MODULE-28C
40. If the free end of a cantilever of span L and flexure rigidity EI
undergoes a unit displacement (without rotation), what is the
bending moment induced at the fixed end?
a) b)
c) d)
Ans: (D)
41. A fixed beam AB, of constant EI, shown in the figure below,
supports a concentrated load of 10 kN. What is the fixed end-
moment at support A?
c) 7.2kN-m d) 9.5kN-m
Ans:
Ans: (B)
JH ACADEMY Page 24