Professional Documents
Culture Documents
ANTI
BITUMEN
STRIPPING EXPANSION
POLYSULPHIDE
JOINT MICRO
BITUMEN
SURFACING
EMULSIONS
AGENTS FILLER
SEALANTS
BOARDS EMULSIONS
SOLUTIONS
Waterproofing Products
TIKI SEALING COMPOUND
CONFMG.TO IS :1834/1984 (ISI MARKED)
MATERIALS
Joint sealing compounds composed of suitable mixtures of materials,shall form a resilient and adhesive barrier
in concrete joints and shall be capable of resisting the infiltration of water and the ingress of solid particles.
They shall not be unduly affected by temperature variation, and shall resist the tendency to flow out of the
joint or be picked up by vehicle tiers under hot weather conditions.
Heating of Sealing Compound should be carried out to the extent so as to achieve a pouring consistency
enabling it to run molten in a uniform manner into all types of horizontal joints without difficulty.
Sealing compounds shall be employed for filling contraction and construction joints as well as a sealing
medium above expansion joint fillers to a depth not exceeding 40mm.
Suitable primers may be first applied to the vertical faces of the concrete joint before the pouring of sealing
compounds in order to improve the adhesive qualities of the latter.
GRADES
This standard covers two grades of sealing compounds:
Grade A is suitable for use in concrete constructions other than those which are subjected to spillage of
kerosene or other petroleum oils.
Grade B is suitable for use in construction where resistance to kerosene or other petroleum oil is required.
COVERING CAPACITY
Estimation guide for joint Sealing Compounds required per 100 meters running in kg. of 25mm depth is as
under:
12mm 40kg.
18mm 60kg.
25mm 80kg.
Primer coverage approx 0.91trs.per 100 running meters for 25mm depth of joints
2012 Copyright Tiki Tar Industries India Ltd. Design and Powered by