Professional Documents
Culture Documents
AN1
Instruction manual
PAGE 1
Main motor Main housing
C-channel base
Wall bracket
C
C-channel
C
Expansion bolt
(not included)
Drive bar (with left and right type)
PAGE 2
1 Install the C-channel base C-
64.5 cm
reference point
reference point
Align the hole to the mark
PAGE 3
4 Install the wall bracket
Wire outlet
Align the wall bracket to the water level Wire
PAGE 4
Adjust the open and close position
Adjust the stopper nut to contact
with the stopper plate
Long nut, for position control use Close position Open position
B C
PAGE 5
* The motor can be installed at any height level
level
C
Please ensure the vertical level of the C-channel base
PAGE 6
Solar Panel
Antenna
Note:
Use either solar panel
or transformer
Do not use both at 1 time
(Hybrid mode control)
Photo sensor
(for lamp control)
Black
DC 12V
Use high current capacity cable for electric motors Piezzo Siren
Lamp Relay
(DC12V)
Auto Lock
GBS-128RX GBS-125TX
Motor B Motor A
NOTE: The INFRARED BEAM is switched off automaticaly when the gate is close.
If need to ON it for test purchase, open the gate or ARM the alarm
PAGE 7
Pairing the remote control with the control panel
Remote Control
MD-8285-AL
www.dcmoto.my
PAGE 8