Professional Documents
Culture Documents
EPB 1500AE E P B 2 5 0 0 A E
P I PE JACK I N G MU CK WAGGON
s P ECIAL F EATURES Controll panel inside machine. Equipped with heavy duty long-life main
Face support by earth pressure. Designed for soft and mixed ground bearing and high torque electrical drive.
Soil conditioning by foam injection in conditions by use of different cutting wheels All machines compatible to U.N.S. Guidance
excavation chamber and screw conveyor (full face excavation). System.
possible. Access to cutting wheel for tool replacement Muck pump conveyance possible.
Maximum dimension of screw conveyor. (backloading system).
1. Articulated Shield
Outer diameter mm 1,810 1,970 2,150 2,425 2,655 2,835 3,025
Pipe OD mm 1,780 1,940 2,120 2,400 2,630 2,810 3,000
Pipe ID mm 1,500 1,600 1,800 2,000 2,200 2,400 2,500
Main drive
Max. torque kNm 175 175 335 335 450 520 520
Revolution soft start LH/RH rpm 3.6 3.6 2.8 2.8 2.8 2.4 2.4
Revolution frequency converter opt.* rpm 0-4.3 0-4.3 0-3.3 0-3.3 0-3.3 0-2.8 0-2.8
Rated Power kW 60 60 90 90 120 120 120
Screw Conveyor diameter mm 350 350 350 400 400 500 500
Roll correction 3 3 3 3 3 3 3
Steering
Steering cylinders 4 4 4 4 8 8 8
Force per cyl./oil pressure kN/bar 752/500 1,005/500 1,272/500 1,272/500 770/500 770/500 770/500
Stroke per cyl. mm 60 60 100 100 100 100 100
Control
Computer data logging system opt. opt. opt. opt. opt. opt. opt.
Fuzzy control (automatic steering) opt. opt. opt. opt. opt. opt. opt.
Fully visualized process control opt. opt. opt. opt. opt. opt. opt.
Active roll protection (el.-hydr.) 3 3 3 3 3 3 3
Suitability U.N.S.: ELS opt. opt. opt. opt. opt. opt. opt.
ELS-HWL opt. opt. opt. opt. opt. opt. opt.
LNS opt. opt. opt. opt. opt. opt. opt.
GNS opt. opt. opt. opt. opt. opt. opt.
2. Machine Can
Lubrication System 3 3 3 3 3 3 3
3. General Information
Pipe Jacking 3 3 3 3 3 3 3
Drive length (recommended) m 400 500 500 600 600 600 600
Access to cutting wheel 3 3 3 3 3 3 3
Waterproofness bar 3 3 3 3 3 3 3
Telescopic and interjacking station opt. opt. opt. opt. opt. opt. opt.
Cutting wheel drive via frequency converter opt. opt. opt. opt. opt. opt. opt.
Foam injection system opt. opt. opt. opt. opt. opt. opt.
Ma c hi n e dime n s ion s
1)
Machine type 2)
ID of jacking pipe 3)
Access to cutting wheel 4)
Type of container, power transfer from container to machine
All rights reserved.Any information contained herein is for informational purposes only. Subject to change without notice. We are not responsible for typographical errors.
All dimensions and data refer to customizable basic product features and are not intended for design or build purposes.