Professional Documents
Culture Documents
Type Selection
Mounting Output Measuring range Supply: 24 VDC Supply: 48 VDC Supply: 24/48 VAC Supply: 115/230 VAC
DIN-rail SPDT 0.1 to 10 V AC/DC DUB 01 C 724 10V DUB 01 C 748 10V DUB 01 C B48 10V DUB 01 C B23 10V
2 to 500 V AC/DC DUB 01 C 724 500V DUB 01 C 748 500V DUB 01 C B48 500V DUB 01 C B23 500V
Plug-in SPDT 0.1 to 10 V AC/DC PUB 01 C 724 10V PUB 01 C 748 10V PUB 01 C B48 10V PUB 01 C B23 10V
2 to 500 V AC/DC PUB 01 C 724 500V PUB 01 C 748 500V PUB 01 C B48 500V PUB 01 C B23 500V
Mode of Operation
DUB01 and PUB01 monitor set level (see hysteresis set- Provided that the voltage Note
both AC and DC over or ting), or when power supply has dropped below (or has When the inhibit contact is
under voltage. is interrupted. exceeded) the set point (see opened, if the input signal is
hysteresis setting) the relay already in alarm position, the
Example 1 Example 2 releases when the intercon- delay time needs to elapse
(no connection between ter- (connection between termi- nection between terminals before relay activation.
minals Z1, Y1 or 8, 9 - latch nals Z1, Y1 or 8, 9 - latch Z1, Y1 or 8, 9 is interrupted,
function disabled) function enabled) or power supply is interrupt-
ed as well.
The relay operates when the The relay operates and latch- The yellow LED flashes until
measured value exceeds (or es in operating position the delay time has expired or
drops below) the set level for when the measured value the measured value has
more than the set delay time. exceeds (or drops below) the dropped below the set point
It releases when the voltage set level for more than the (see hysteresis setting).
drops below (or exceeds) the set delay time.
Wiring Diagrams
Example 1 Example 1
24/48
24 VDCVDC
(+) (+) 24/48
24 VDCVDC
(+) (+)
48/230 VAC 24/115 VAC 48/230 VAC 24/115 VAC
L L
Z1 A1 A3 16 18 9 8 2 11 4 3
PE
Y1
U PE U
7
Y2 A2 15 5 10 1
N(-) N(-)
Example 2 Example 2
Latch/inhibit 24/48
24 VDCVDC
(+) (+) 24/48
24 VDC VDC
(+) (+)
enable 48/230 VAC 24/115 VAC 48/230 VAC 24/115 VAC
Latch/inhibit
enable
L L
Z1 A1 A3 16 18 9 8 2 11 4 3
PE U PE U
Y1 7
Y2 A2 15 5 10 1
Operation Diagrams
Over voltage - N.D. relay Under voltage -- Latch function - N.D. relay
Latch function
Latch ON
Set Level
Hysteresis
Hysteresis
Set Level
Relay ON 1 or 6 s
Red LED ON
Hysteresis
Set Level
Set Level
Hysteresis
Relay ON 1 or 6 s
Red LED ON