Professional Documents
Culture Documents
+973-39156680
Kanagasabai.Kandasamy@bh.yokogawa.com
TECHNICAL QUALIFICATION
Diploma
Electrical & Electronics Engineering
Motilal Nehru Govt Polytechnic, Pondicherry, India.
Year of completion: 1999
Percentage Marks: 87.3
PROFESSIONAL EXPERIENCE
Responsibilities
Execution of Service Projects on Centum VP, Prosafe RS, Stardom & SCADA
Systems.
Project Management, Project documentation, Software design & development,
FAT & IFAT.
Conducting SAT (Site Acceptance Test).
Start-up, installation & commissioning of Yokogawa Stardom & SCADA
Systems.
Customer training on Operation, Maintenance and Engineering of Stardom &
SCADA.
Technical support for various Yokogawa affiliates and Customers in Middle
East on various Yokogawa systems.
Page: 1 of 3
Updated as on: Jul-2017
From April 2008 to Apr 2010
Responsibilities
Responsibilities
Programming the PLC, configuring HMI and SCADA for the automation of the
Plant as per 21CFR Part 11 Compliance of FDA and also following GAMP4
rules for documentation
Understanding the P&ID of the whole system and to prepare IO List,
Generating Hardware configuration, HDS, SDS and developing the SCADA
screens as per P&ID
Preparing the functional specifications as per customer requirement and Valve
Matrix
Checking the Instrumentation and Automation functionality as per DQ, IQ, OQ
& PQ
Proving instrumentation and automation performance and getting clearance
from the customer during Factory Acceptance Test
Installing and commissioning of the plant at customer site and getting
clearance from the customer during Site Acceptance Test
Page: 2 of 3
Updated as on: Jul-2017
Its a real time project, where the digester process in Sirpur Paper Mill,
Andrapradesh is automated using Distributed Control System, CENTUM
CS1000. The Project covers SEBOL [Sequential and Batch Oriented
Language] programming for sequence of operation to be carried out in
digester and generation of logics for Interlocks and generation of Control
Loops
Having 6 months of experience in System Engineering of DCS - CENTUM
CS1000, Generation of logics, Generation of Control loops, Generation of
sequences using Sequence and Batch Oriented Language [SEBOL] etc.
Worked in CENTUM Micro XL and done two upgradation jobs from CENTUM
Micro XL to CENTUM CS1000 and CS3000
DOMAINS WORKED IN
Power
Bio Pharma
Water
Chemical process
Building Technology
Oil Well Substations
Oil & Gas
TECHNICAL CERTIFICATION
Page: 3 of 3
Updated as on: Jul-2017