Professional Documents
Culture Documents
35) identify the correct statement for OUTPUT is low when all input are high?
a)positive NAND/ negative NOR #
36)while testing a semiconductor diode with an ohmmeter?
a)a good diode has much more diode resistance with one polarity of the ohmmeter lead
compared with the opposite polarity #
37) Condition ESMIN pg 135
1. NAND gate
2. NOR gate#
3. AND gate
38)Condition
40)Sensitivity of coil 20000 lv amount of current required to full scale deflection ESMIN pg162
1. 5 MA
2. 50 micro amps#
3. 30 A
41)A metal which are hammer, rolled or pressed into varies shapes without cracking, breaking, or
leaving any detrimental effect.
1. Melleability. #
42.A D.C generator consist of (BLT VOL 2)
1) Rotating armature, field winding, Brush assembly #
43.Voltage gain 200 and current gain 50 calculate power gain
1.4
2. 10000MA
3.10000A
4.10000 #
44. When ELT battery is remove
1). after it discharge
2). After 50% of full capacity to be discharge
3)by observing the bat replacement date marked on the outside of transmitter #
a) 2&3&4
b) 1&3#
c) 2&3&5
d) 1&3&5
50)Self inducting of 1 hennery equal to
1. I mill voltage to the one amplifier second curer flow
2. I volt to the 10 ampere per second current flow
3. I volt is induced in it when current change thru it is at the rate of one amp/sec #
51)The hoses are classified by (9A-17-37)
1. Pressure #
2. Vacation
3. Fatigue
4. All
above ans are right which are I marked with my best knowledge !
rest of question came from previous dgca q bank.