Professional Documents
Culture Documents
Ballot Text
This Ballot would modify Tables C.23/E.23 in Spec 5CT from the Resource
Group on Performance Properties (RGPP) by recalculating the values. The
proposed changes for this item are shown in red and are what is under
consideration for this ballot.
NOTE This item was on hold pending the 3076 item; Changes from the
3076 item are shown in blue and not under consideration for this ballot.
This document is not an API Standard; it is under consideration within an API technical committee but has not received all approvals required to
become an API Standard. It shall not be reproduced or circulated or quoted, in whole or in part, outside of API committee activities except with
the approval of the Chairman of the committee having jurisdiction and staff of the API Standards Dept. Copyright API. All rights reserved.
Table C.23 Dimensions and Masses for Standard Casing and for Casing Threaded with API
Round Thread and Buttress Thread
Calculated Mass c
Nominal em , mass gain or loss due to end finishing d
Wall Inside Drift
Outside Linear
Labels a Thick- Diam- Diam- Plain- kg
Diameter Mass
ness eter eter end
T&C b, c Round Thread Buttress Thread
D t d wpe
1 2 Short Long RC SCC
mm kg/m mm mm mm kg/m
1 2 3 4 5 6 7 8 9 10 11 12
4-1/2 9.50 114.30 14.38 5.21 103.88 100.70 14.02 3.64
4-1/2 10.50 114.30 15.73 5.69 102.92 99.74 15.24 3.33 4.53 1.12
4-1/2 11.60 114.30 17.38 6.35 101.60 98.42 16.91 3.18 4.32 0.91
4-1/2 13.50 114.30 19.87 7.37 99.56 96.38 19.44 3.35 4.07 0.60
4-1/2 15.10 114.30 22.69 8.56 97.18 94.00 22.32 3.53 3.64 0.24
5 11.50 127.00 17.19 5.59 115.82 112.64 16.74 4.32
5 13.00 127.00 19.69 6.43 114.14 110.96 19.12 4.00 4.85 5.38 1.24
5 15.00 127.00 22.69 7.52 111.96 108.78 22.16 3.71 4.51 4.99 0.61
5 18.00 127.00 27.19 9.19 108.62 105.44 26.70 4.52 4.40 0.22
5 21.40 127.00 32.13 11.10 104.80 101.62 31.73 3.45 3.76 0.62
5 23.20 127.00 34.76 12.14 102.72 99.54 34.39 3.15 3.42 0.96
5 24.10 127.00 36.15 12.70 101.60 98.42 35.80 2.99 3.23 1.14
5-1/2 14.00 139.70 20.91 6.20 127.30 124.12 20.41 4.60
5-1/2 15.50 139.70 23.48 6.98 125.74 122.56 22.85 4.36 5.26 5.71 0.87
5-1/2 17.00 139.70 25.72 7.72 124.26 121.08 25.13 4.14 5.31 5.41 0.58
5-1/2 20.00 139.70 30.05 9.17 121.36 118.18 29.52 4.50 4.84 0.45
5-1/2 23.00 139.70 34.05 10.54 118.62 115.44 33.57 4.37 4.31 0.52
5-1/2 26.80 139.70 40.15 12.70 114.30 111.12 39.78
5-1/2 29.70 139.70 44.47 14.27 111.16 107.98 44.14
5-1/2 32.60 139.70 48.74 15.88 107.94 104.76 48.49
5-1/2 35.30 139.70 52.80 17.45 104.80 101.62 52.61
5-1/2 38.00 139.70 56.82 19.05 101.60 98.42 56.68
5-1/2 40.50 139.70 60.64 20.62 98.46 95.28 60.55
5-1/2 43.10 139.70 64.41 22.22 95.26 92.08 64.38
6-5/8 20.00 168.28 29.76 7.32 153.64 150.46 29.06 5.58 6.23 6.35 0.89
6-5/8 24.00 168.28 35.72 8.94 150.40 147.22 35.13 4.42 5.48 5.52 0.68
6-5/8 28.00 168.28 41.67 10.59 147.10 143.92 41.18 4.73 4.71 0.75
6-5/8 32.00 168.28 47.62 12.06 144.16 140.98 46.46 4.73 4.00 1.46
7 17.00 177.80 25.60 5.87 166.06 162.88 24.89 7.61
7 20.00 177.80 29.91 6.91 163.98 160.80 29.12 6.74
7 23.00 177.80 34.67 8.05 161.70 158.75 e 33.70 6.26 7.94 8.28 0.58
7 23.00 177.80 34.67 8.05 161.70 158.52 33.70 6.26 7.94 8.28 0.58
7 26.00 177.80 39.14 9.19 159.42 156.24 38.21 5.79 7.37 7.65 0.54
7 29.00 177.80 43.60 10.36 157.08 153.90 42.78 6.79 7.13 0.69
7 32.00 177.80 47.92 11.51 154.78 152.40 e 47.20 6.23 6.40 1.31
7 32.00 177.80 47.92 11.51 154.78 151.60 47.20 6.23 6.40 1.31
7 35.00 177.80 52.09 12.65 152.50 149.32 51.52 5.68 5.79 1.91
7 38.00 177.80 56.10 13.72 150.36 147.18 55.52 5.18 5.24 2.47
7 42.70 177.80 63.84 15.88 146.04 142.86 63.41
7 46.40 177.80 69.35 17.45 142.90 139.72 69.01
7 50.10 177.80 74.85 19.05 139.70 136.52 74.58
7 53.60 177.80 80.21 20.62 136.56 133.38 79.93
7 57.10 177.80 85.42 22.22 133.36 130.18 85.25
This document is not an API Standard; it is under consideration within an API technical committee but has not received all approvals required to
become an API Standard. It shall not be reproduced or circulated or quoted, in whole or in part, outside of API committee activities except with
the approval of the Chairman of the committee having jurisdiction and staff of the API Standards Dept. Copyright API. All rights reserved.
Table E.23 Dimensions and Masses for Standard Casing and for Casing Threaded with API
Round Thread and Buttress Thread
Calculated Mass c
D t d wpe
1 2 Short Long RC SCC
in. lb/ft in. in. in. lb/ft
1 2 3 4 5 6 7 8 9 10 11 12
4-1/2 9.50 4.500 9.5070 0.205 4.090 3.965 9.41 8.02
4-1/2 10.50 4.500 10.5060 0.224 4.052 3.927 10.24 7.34 9.98 2.47
4-1/2 11.60 4.500 11.6070 0.250 4.000 3.875 11.36 7.00 7.95 9.52 2.01
4-1/2 13.50 4.500 13.5030 0.290 3.920 3.795 13.05 7.38 8.82 1.32
4-1/2 15.10 4.500 15.1030 0.337 3.826 3.701 15.00 6.73 8.02 0.52
5 11.50 5.000 11.5060 0.220 4.560 4.435 11.24 9.52
5 13.00 5.000 13.0020 0.253 4.494 4.369 12.84 8.81 10.69 11.86 2.21
5 15.00 5.000 15.0030 0.296 4.408 4.283 14.88 8.17 9.95 11.00 1.35
5 18.00 5.000 18.0030 0.362 4.276 4.151 17.95 8.83 9.71 0.05
5 21.40 5.000 21.4060 0.437 4.126 4.001 21.32 7.60 8.28 1.37
5 23.20 5.000 23.2040 0.478 4.044 3.919 23.11 6.95 7.53 2.12
5 24.10 5.000 24.1030 0.500 4.000 3.875 24.05 6.60 7.13 2.52
5-1/2 14.00 5.500 14.00 0.244 5.012 4.887 13.71 10.14
5-1/2 15.50 5.500 15.7080 0.275 4.950 4.825 15.36 9.61 11.60 12.58 1.92
5-1/2 17.00 5.500 17.0030 0.304 4.892 4.767 16.89 9.12 11.03 11.93 1.27
5-1/2 20.00 5.500 20.0020 0.361 4.778 4.653 19.83 9.92 10.67 0.01
5-1/2 23.00 5.500 23.0022.90 0.415 4.670 4.545 22.56 8.90 9.51 1.15
5-1/2 26.80 5.500 26.8027.00 0.500 4.500 4.375 26.72
5-1/2 29.70 5.500 29.7090 0.562 4.376 4.251 29.67
5-1/2 32.60 5.500 32.6070 0.625 4.250 4.125 32.57
5-1/2 35.30 5.500 35.3050 0.687 4.126 4.001 35.35
5-1/2 38.00 5.500 38.0020 0.750 4.000 3.875 38.08
5-1/2 40.50 5.500 40.5080 0.812 3.876 3.751 40.69
5-1/2 43.10 5.500 43.1030 0.875 3.750 3.625 43.26
6-5/8 20.00 6.625 20.00 0.288 6.049 5.924 19.51 11.15 13.74 14.00 1.97
6-5/8 24.00 6.625 24.00 0.352 5.921 5.796 23.60 9.74 12.08 12.18 0.15
6-5/8 28.00 6.625 28.00 0.417 5.791 5.666 27.67 10.42 10.38 1.65
6-5/8 32.00 6.625 32.00 0.475 5.675 5.550 31.23 8.98 8.81 3.22
7 17.00 7.000 17.20 0.231 6.538 6.413 16.72 16.77
7 20.00 7.000 20.10 0.272 6.456 6.331 19.56 14.68
7 23.00 7.000 23.30 0.317 6.366 6.250 e 22.65 13.80 17.51 18.26 1.27
7 23.00 7.000 23.30 0.317 6.366 6.241 22.65 13.80 17.51 18.26 1.27
7 26.00 7.000 26.30 0.362 6.276 6.151 25.69 12.76 16.25 16.86 0.12
7 29.00 7.000 29.30 0.408 6.184 6.059 28.75 14.97 15.46 1.52
7 32.00 7.000 32.20 0.453 6.094 6.000 e 31.70 13.74 14.11 2.88
7 32.00 7.000 32.20 0.453 6.094 5.969 31.70 13.74 14.11 2.88
7 35.00 7.000 35.00 0.498 6.004 5.879 34.61 12.53 12.77 4.21
7 38.00 7.000 37.70 0.540 5.920 5.795 37.29 11.41 11.55 5.44
7 42.70 7.000 42.90 0.625 5.750 5.625 42.59
7 46.40 7.000 46.60 0.687 5.625 5.500 46.36
7 50.10 7.000 50.30 0.750 5.500 5.375 50.11
7 53.60 7.000 53.90 0.812 5.376 5.251 53.71
7 57.10 7.000 57.40 0.875 5.250 5.125 57.29
This document is not an API Standard; it is under consideration within an API technical committee but has not received all approvals required to
become an API Standard. It shall not be reproduced or circulated or quoted, in whole or in part, outside of API committee activities except with
the approval of the Chairman of the committee having jurisdiction and staff of the API Standards Dept. Copyright API. All rights reserved.