You are on page 1of 7

http://320volt.

com/en/spdt-relay-and-dpdt-relay/ 1/7

Table of Contents

Table of Contents 1
SPDT RELAY AND DPDT RELAY 2
SPDT RELAY CIRCUIT SCHEMATIC 2
HOW SPDT RELAY WORK? 2
DPDT RELAY 2
TO SWITCH BETWEEN THE 2 DIFFERENT LOADS WITH DPDT SWITCH 3
TO CHANGE THE DIRECTION OF ROTATION OF THE MOTOR WITH A DPDT RELAY 3
WHAT IS THIS SPDT DPDT SPST DPST RELAYS 4
Author: Gevv 6
RANDOMINIZE 7
http://320volt.com/en/spdt-relay-and-dpdt-relay/ 2/7

TAGS CONTACT CALCULATORS

320volt / Electronics Projects /

SPDT RELAY AND DPDT RELAY

Electronics Projects, SPDT Relay and DPDT Relay article "analog circuits projects, " tagged
with

In SPDT spdt relays (Single Pole Double Throw SPDT Relay) are very useful in some applications
due to its internal configuration. It has one common terminal and 2 contacts in 2 different versions
can be normally closed and the other opened, or it may be normally open and the other closed. So
basically you can see the spdt relay as a way to toggle between 2 loops: when there is no voltage at
the coil is one circuit receives current, the other is not and when the coil gets voltage is reversed.

SPDT RELAY CIRCUIT SCHEMATIC

HOW SPDT RELAY WORK?


In Fig. 1 the DC voltage is supplied to the coil so the terminal T is connected to contact 1 therefore
the current can flow through the fan 1 and it cannot flow through the fan 2.

In Fig.2, When the DC voltage is supplied to the coil and the terminal T is now connected to pin-2, so
that current does not flow through the fan 1, but now it flows through the fan-2.

DPDT RELAY
In dpdt relay (double-pole two-position) is quite interesting and can be used in various ideas,
including changing the direction of movement of the engine, as you can see in the picture below. It
has 2 terminals and connectors 4 and you can look at the dpdt relay as the equivalent of 2 SPDT
relays.
http://320volt.com/en/spdt-relay-and-dpdt-relay/ 3/7

TO SWITCH BETWEEN THE 2 DIFFERENT LOADS WITH


DPDT SWITCH

we can use a dpdt switch to select between the 2 different loads, and also have a visual indication
that the load is connected. In our case (Fig. 1) when there is no voltage at the coil the fan and green
led turn on . When we apply voltage to the coil (Fig. 2) the relay switches its contacts and now the
light buld and the red led does not turn on.

TO CHANGE THE DIRECTION OF ROTATION OF THE MOTOR


WITH A DPDT RELAY
http://320volt.com/en/spdt-relay-and-dpdt-relay/ 4/7

As you can see in the schematic diagram with 12V battery (or use other voltages) connected to the
plus terminal T1 and minus terminal T2. Contacts 1 and 4 connected to 2 and 3 too.

Without voltage applied to the coil to positive battery connected to pin-1 (and-4) and minus 3 (and-2)
so that the motor rotates in one direction (say clockwise). When voltage is applied to the coil of the
relay switches and now T1 (+plus) is connected to pin 2 (and-3) and T2 (-minus) connected to 4
(and-1), so the motor changes direction of rotation.

WHAT IS THIS SPDT DPDT SPST DPST RELAYS


http://320volt.com/en/spdt-relay-and-dpdt-relay/ 5/7

SPST Single Pole Single Throw. These have two terminals which can be connected or
disconnected. Including two for the coil, such a relay has four terminals in total. It is ambiguous
whether the pole is normally open or normally closed. The terminology SPNO and SPNC is
sometimes used to resolve the ambiguity.

SPDT Single Pole Double Throw. A common terminal connects to either of two others. Including two
for the coil, such a relay has five terminals in total.

DPST Double Pole Single Throw. These have two pairs of terminals. Equivalent to two SPST
switches or relays actuated by a single coil. Including two for the coil, such a relay has six terminals
in total. The poles may be Form A or Form B (or one of each).

DPDT Double Pole Double Throw. These have two rows of change-over terminals. Equivalent to two
SPDT switches or relays actuated by a single coil. Such a relay has eight terminals, including the
coil.

source: https://en.wikipedia.org/wiki/Relay
http://320volt.com/en/spdt-relay-and-dpdt-relay/ 6/7

Advertisement

Author: Gevv
15.10.2016 SPDT Relay and DPDT Relay

Tags: ANALOG CIRCUITS PROJECTS

Bad link report

Electronics Circuits
Flowcode Examples
Flowcode pic programming pic about the program in the form of flow diagrams of
the easiest programs you can write easily in the market, still us is very simple,
although it was touted as easy a little bit microcontroller, code, etc. there must be a
free expression of information can be solved by the application of very video
though, especially as a hobby Flowcode v4 Flowcode programming pic with most
of the samples prepared with an ideal program for those

Elektronisch Projekte
SPDT-Relais und DPDT-Relais
In SPDT spdt-relais (Single Pole Double Throw-SPDT-Relais) sind sehr ntzlich,
in einigen Anwendungen aufgrund Ihrer internen Konfiguration. Es hat eine
http://320volt.com/en/spdt-relay-and-dpdt-relay/ 7/7

gemeinsame Klemme und 2 Kontakten in 2 verschiedenen Versionen knnen Sie


in der Regel geschlossen und das andere geffnet, oder es kann normalerweise
offen und die andere geschlossen. Also im Grunde knnen Sie sehen, die spdt-
relais als einen Weg, der zum Umschalten zwischen den 2 loops: wenn es keine
Spannung an der Spule ist eine Schaltung erhlt Strom, der andere nicht und wenn
die Spule bekommt Spannung Umgekehrt wird.

RANDOMINIZE

PIC18F2550 US B isolated 50W Amplifier Circuit dsPIC30F2012 electronic


Triac Control CCS C TDA2050 stethoscope amplifies
Visual Basic

2016 Electronics Projects Circuits.


Electronic Projects for engineering students hobby electronic circuits, projects. 320volt

You might also like