Professional Documents
Culture Documents
1. ________ maps shows boundary locations at site with respect to neighbourhood marks.
a. Topographic b. Location c. Cadastral d. Forest
3. A _______ map is a map of different types of rock on the surface of the earth.
a. Geological b. Location c. Cadastral d. Forest
4. Once surveying is done, next step is to use this data to plot ________
a. Line b. Area c. Map d. Ground
5. _______ maps that shows climate weather and wind are environmental maps.
a. Forest b. Meteorological
c. Biogeographic d. Geological
12. One of the need of electronic distance meter and digital theodolite is _________
a. Levelling
b. To find direct area
c. More accurate
d. The curves on the road are properly located by EDM and digital theodolite.
13. The _____ waves are generated and transmitted in the EDM.
a. Electromagnetic b. Ultraviolet
c. Incident d. Alpha Red
14. The electromagnetic waves require no medium to travel because they can travel in ____
a. Vacuum b. Air c. Light d. Dark
15. The ratio of velocity of electromagnetic waves in vacuum to that in atmosphere is ______
a. Refractive index b. Ratio index
c. Refraction index d. Index
18. In _______ , the EDM and digital theodolite are built as one unit.
a. Total Station b. Distomat
c. Geodimeter d. None of these
19. _______ is one of the varieties of electronic distance meter, which uses infrared waves.
a. Total Station b. Distomat
c. Geodimeter d. None of these
22. In EDM, _______ makes the line of collimation of LCD display horizontal.
33. ________ clamp is used to bring the motion of telescope in the horizontal plane.
a. Vertical clamp b. Horizontal clamp
c. Parallel clamp d. Tangential clamp
36. In case of theodolite, reading of horizontal and vertical angle is displayed on _________
a. Telescope b. Clamp screws
c. Levelling Head d. Display Window
39. The _______ is used for finding out areas of irregular figures on sheet.
a. Compass b. Optical square
c. Theodolite d. Planimeter
40. The _______ planimeter rests with the roller on one side and wheel on the other side.
a. Digital b. Conventional c. Standard d. Automatic
42. In case of digital planimeter, ________ key indicated that the scale factor is store.
a. HOLD b. SCALE c. MEMO d. BATT
43. In case of digital planimeter, ________ key indicates low battery level.
a. HOLD b. SCALE c. MEMO d. BATT
45. A _______ can combine geographic and other data to generate maps and reports.
a. GIS b. SIS c.SIG d.PRO
47. GIS software also have the compatibility with various other softwares such as ________
a. Autocad b. VB c. CAD d. GRJ
51. _______ technology is a fast and accurate method of determining the location of point.
a. GPS b. GIS c. FEM d. None of these
59. Any surface parallel to the mean spheroid of earth is called as ________
a. Level surface b. Vertical line c. Horizontal line d. BM
60. ________ is the average height of sea for all stages of the tides.
a. Mean sea level b. Datum c. Level line d. Datum surface
61. A straight line tangential to the level line and perpendicular to plumb line is _________
a. Level line b. Level surface
c. Horizontal line d. BM
62. The Mean Sea Level (MSL) at _______ is considered as the datum surface in India.
a. Karachi b. Mumbai c. Kerala d. Delhi
65. In dumpy level, ______ consists of movable eyepiece on one side and object glass on
other.
a. Tripod stand b. Levelling head
c. Telescope d. Foot screw
67. In dumpy level, ______ is provided on the objective side to protect the object glass.
a. Eyepiece b. Object glass c. Telescope d. Ray Shade
68. The _______ is a device by which the observer measures the vertical distance.
a. Levelling staff b. Ranging rod
c. Tripod stand d. Dumpy level
69. In dumpy level ______ is an imaginary line which is tangential to the longitudinal
curvature of the bubble tube at its center.
a. Line of collimation b. Axis of telescope
c. Axis of level tube d. Vertical axis
71. A ________ is a straight rectangular piece of wood or metal with gradations on it.
a. Levelling staff b. Ranging rod
c. Tripod stand d. Dumpy level
74. When the dumpy level is to be set on a new point on the ground, then ____ are to be
made.
a. Temporary adjustment b. Adjustment
c. Permenent adjustment d. Fixing
75. The _____ of level and tripod stand enables the surveyor to fix the instrument.
a. Threading b. Fixing c. Screw d. Plate
76. _______ of the eyepiece enables to make the crosshair clear and distinct.
a. Focussing b. Rotation c. Revolution d. Fixing
77. _________ is a fixed reference point of known elevation with respect to some datum.
a. Mean Sea Level b. Datum c. Benchmark d. Point
78. Levelling work carried out with reference to __________ benchmarks gives elevations of
points with respect to mean sea level.
a. GTS benchmarks
b. Permanent benchmarks
c. Arbitrary benchmarks
d. Temporary benchmarks
79. The positions of GTS benchmarks and elevations are shown on GTS maps published by
___________
a. Department of survey of India b. PWD
c. Water supply department d. Irrigation Department
80. Permanent benchmarks are established by the local Govt. authorities like _______
a. Department of survey of India b. Survey Department
c. Water supply department d. Irrigation Department
81. With reference to ________ the work is carried forward on the next day and soon.
a. GTS benchmark
b. Permanent benchmarks
c. Arbitrary benchmarks
d. Temporary benchmarks
82. _________ is the vertical distance of a point measured above or below datum.
a. RL b. BM c. FB d. BB
84. The _______ is the first staff reading taken on a point of known elevation.
a. B.S. b. F.S. c. BB d. FB
85. _________ is the last reading observed before shifting the level.
a. B.S. b. F.S. c. BB d. FB
87. _________ is the reduced level of the plane of collimation, when the instrument is
correctly levelled.
a. I.S. b. F.S. c. BB d. HI
89. _______ is the point on which F.S. and B.S. readings are taken for further leveling.
a. I.S. b. F.S. c. BB d. Change point
90. An imaginary line joining points having same reduced level is known as
a. Contour b. Contour line c. Contour map d. Imaginary line
c. To check bearing
d. To calculate distance
95. In ________ method, the area to be surveyed is divided into regular squares.
a. Direct method b. Radial lines
c. Method of squares d. Straight method
d) None of above
113. is a one set up of level of find elevation of points.
a)Simple leveling
b) Differential leveling
c) Fly leveling
d)Profile leveling
114 .is done along a river or pond .for this two level are used simultaneously one
at either end.
a)Simple leveling
b) Differential leveling
c) Fly leveling
d) Reciprocal leveling
115. The collimation plane and rise & fall method are used for the determination of
.
a)Horizontal level
b) Reduced level
c) Increased level
d) None of above
116. .is the summation of reduced level of bench mark and back sight
a)Height of tripod
b)Height of instrument
c) Fore sight
d) None of above
117. the collimation plane method of arithmetic check is taken as
a)B.S-F.S=Last R.L-First R.L
b) B.S-I.S=Last R.L-First R.L
c)I.S-F.S=Last R.L-First R.L
d) None of above
118. In Rise & Fall method of arithmetic check is taken as..
a)B.S-F.S=Rise-Fall=Last R.L-First R.L
b) B.S-I.S=Rise-Fall=Last R.L-First R.L
c)I.S-F.S=Rise-Fall=Last R.L-First R.L
d) None of above
119..is defined as imaginary line joining points of equal elevation
a)Horizontal equivalent
b)A Contour
c)Contour interval
d) None of above
120.is a point on which fore and back sight reading are known
a)Back point
b) Fore point
c) Change point or turning point
d) None of above
121.Points A,B,C have RLs 301.200m. 300.00m & 301.20m In rise & fall method, if reading
on A is 2.200m; readings on B & C will be -------- respectively.
a. 1.200 & 0.000 b. 1.000 & 1.200 c. 3.400 & 2.200 d. 2.200 & 3.400
122. Height of instrument at station will be ------ if BM has Rl of 234.560m and reading on
BM is 2.560m.
35 B 77 C 119 B
36 D 78 A 120 C
37 C 79 A 121 C
38 A 80 D 122 A
39 D 81 D 123 C
40 A 82 A 124 A
41 A 83 A
42 B 84 A