You are on page 1of 4

TT22

HIGH OUTPUT 2 WAY SPEAKER


Applications
- Theatrical sound reinforcement
- Portable and installed audio-visual systems
- Concert halls, night clubs and houses of worship
- Stage monitoring side ll
- Front and balcony ll
Features
- Very compact size (600 x 400 x 400 mm / 23.62 x 15,74 x 15,74)
- Maximum output per size available on market
- Minimum weight (28.8 kg / 63.49 lbs)
- Wide, constant directivity, horizontal coverage angle
- High power neodymium transducers
- Dual function design: built in passive crossover or external bi-amp
- LICC (Low Impedance Compensated Crossover Network)

SYSTEM
TT22 is a full range, extremely versatile two-way passive loudspeaker system Freq. Range (-10 dB): 50Hz-20kHz
offering substantial power and efficiency for a variety of professional applications: Freq. Range (-3 dB): -
Horiz. coverage angle (-6 dB): 90
theatre and touring markets as well as fixed installations. Vertical coverage angle (-6 dB): 40
Directivity factor; Q: -
TT22 is a 2-way active system featuring 12 neo woofer, 86 mm voice coil in a bass System sensitivity1: 98db. 1W @ 1m
Rated maximum SPL: 131dB. @ 1m
reflex configuration; 1,5 exit, 75 mm voice coil neo compression driver; 90 x 40 System Nominal Impedance: 8
aluminum, constant directivity horn, 90 rotatable. Each transducer has been spe- System Input Power Rating AES2: 800W
cifically designed for the application. The woofer provides large excursion and very System Input Power Rating PEAK2: 3200W
Recommended Amplifier3: 1500W
light weight. The voice coil is a new 4 design, best compromise between power HF Protection: Dynamic Mosfet
handling and low mass. The compression driver features a new pure titanium dome. Crossover: 1.3 kHz
Special ribs on the dome provides maximum flatness and extension in very high
frequencies and venting on top plates guarantee distortion free midrange extension.
TRANSDUCERS
Low Frequency: 12 (304 mm) woofet with 4 (100 mm) coil
Thanks to the extensive use of neodymium and new basket designs, the total weight Nominal Impedance: 8
of the 2 transducers is less than 9 Kg! Input power Rating: 700W AES
Sensitivity1: 98 dB. 1W @ 1m
High Frequency: 1.5(38mm) throat. 3 (76mm)
TT22 includes the LICC-Low Impedance Compensated Crossover that features mar- coil diaphragm assembly
kedly lower induction values in series with the woofer. The benefit is delay reduction, Nominal Impedance: 8
Input power Rating: 100W AES
reduced phase shift and superior transient response. For a superior power handling
Sensitivity1: 111 dB. 1W @ 1m
high power, aluminium case, resistors are used in the crossover network. Dynamic
high-frequency driver protection is accomplished with the RCF exclusive Active
Mosfet Compression Driver Protection System, chosen to complement the power PHYSICAL
curve of the driver. Enclosure: Trapezoidal. 42 side angles
15 mm birch plywood construction
The crossover is easily bypassed for bi-amp via a recessed changeover switch. Rigging inserts: 6 x fly tracks, + pole mount, aluminum side handles
Color: Black. scratch resistant paint
Six high quality detachable fly tracks fittings on both sides of the cabinet offer Grille: Custom perforated steel grille with open-cell poly
fiber backing
horizontal, vertical and coupled suspended orientations. The cabinets features 2 Input Connectors: Speakon NL4
aluminum side handles and a steel pole mount cap Dimensions (H x W x D): 23.62x15.74x15.74 600x400x400 mm
Weight: 63.49 lb - 28.8Kg
1
Measured on axis in the far field with 1 watt (2.83V RMS, 8) input and referenced to 1 meter distance using the
inverse square law. Listed sound pressure represents an average from 300Hz to 3kHz.
2
AES using 20Hz to 20kHz, PN Spectrum, Peak for 2 hours with +6 dB crest factor.
3
Recommended Amplifier is a power capability value thats hould be taken as a guide.
TT22

Response 1W/1m Impedance


120 316

110
100

100

90
dB SPL

Ohms
80
10

70

60

50 1
20 100 1000 10000 100 1000 10000
Frequency (Hz)
TT22 Frequency (Hz)

Beamwidth vs. Frequency Directivity Index and Q


360 100 20

Horizontal Beamwidth (1/3 Octave)


330 Vertical Beamwidth (1/3 Octave)
18

300 16
270
14
Coverage Angle (Deg.)

240

Directivity index Di, dB


12
210
Total Q

180 10 10

150 8

120 6
90
4
60
2
30

0 1 0
100 1000 10000 100 1000 10000
Frequency (Hz) Frequency (Hz)

Normalized Horizontal off-axis Response Normalized Vertical off-axis Response. Below the box
5 5

0 0

-5 -5
Attenuation in dB

Attenuation in dB

-10 -10

-15 -15

-20 -20
Horizontal 10 degrees Vertical -10 degrees
Horizontal 20 degrees Vertical -20 degrees
Horizontal 30 degrees Vertical -30 degrees
-25 Horizontal 40 degrees -25 Vertical -40 degrees
Horizontal 50 degrees Vertical -50 degrees
Horizontal 60 degrees Vertical -60 degrees

-30 -30
100 1000 10000 100 1000 10000
Frequency (Hz) Frequency (Hz)
TT22

Horizontal 1/3 Polar Plot


0 315 0 630 0 1250
250 500 1000
330 200 330 400 330 800
30 30 30

300 60 300 60 300 60

270 90 270 90 270 90


0 -6 -12 -18 -24 -30 -36 -42 -48 -48 -42 -36 -30 -24 -18 -12 -6 0 0 -6 -12 -18 -24 -30 -36 -42 -48 -48 -42 -36 -30 -24 -18 -12 -6 0 0 -6 -12 -18 -24 -30 -36 -42 -48 -48 -42 -36 -30 -24 -18 -12 -6 0

240 120 240 120 240 120

210 150 210 150 210 150

180 180 180

0 2500 0 5000 0 10000


2000 4000 8000
330 1600 330 3150 330 6300
30 30 30

300 60 300 60 300 60

270 90 270 90 270 90


0 -6 -12 -18 -24 -30 -36 -42 -48 -48 -42 -36 -30 -24 -18 -12 -6 0 0 -6 -12 -18 -24 -30 -36 -42 -48 -48 -42 -36 -30 -24 -18 -12 -6 0 0 -6 -12 -18 -24 -30 -36 -42 -48 -48 -42 -36 -30 -24 -18 -12 -6 0

240 120 240 120 240 120

210 150 210 150 210 150

180 180 180

Vertical 1/3 Polar Plot 315 630 1250


90 90 90
250 500 1000
120 200 120 400 120 800
60 60 60

150 30 150 30 150 30

180 0 180 0 180 0


0 -6 -12 -18 -24 -30 -36 -42 -48 -48 -42 -36 -30 -24 -18 -12 -6 0 0 -6 -12 -18 -24 -30 -36 -42 -48 -48 -42 -36 -30 -24 -18 -12 -6 0 0 -6 -12 -18 -24 -30 -36 -42 -48 -48 -42 -36 -30 -24 -18 -12 -6 0

210 330 210 330 210 330

240 300 240 300 240 300

270 270 270

90 2500 90 5000 90 10000


2000 4000 8000
120 1600 120 3150 120 6300
60 60 60

150 30 150 30 150 30

180 0 180 0 180 0


0 -6 -12 -18 -24 -30 -36 -42 -48 -48 -42 -36 -30 -24 -18 -12 -6 0 0 -6 -12 -18 -24 -30 -36 -42 -48 -48 -42 -36 -30 -24 -18 -12 -6 0 0 -6 -12 -18 -24 -30 -36 -42 -48 -48 -42 -36 -30 -24 -18 -12 -6 0

210 330 210 330 210 330

240 300 240 300 240 300

270 270 270


TT22

CSI PRODUCT SPECIFICATIONS FOR DESIGNERS, SPECIFIERS, AND 2.02 Design


CONSULTANTS (ALSO KNOWN AS A&E SPECIFICATIONS) Configuration high output 2 way speaker
LF Sub-section 12 neodymium woofer, 100 mm voice coil
MR Sub-section -
The following are Part 2 Products CSI-type specifications.
HF Sub-section 1,5 neodymium, 76 mm voice coil
It is assumed that Part 1 General Administrative and Procedures
and Part 3 Execution Installation and Maintenance are part of 2.03 Acoustical Proprieties
an overall audio system or project specification. Nominal dispersion angle: Horizontal: 90 - Vertical: 40
Axial frequency range: 50Hz-20kHz
PART 2 PRODUCTS
2.04 Physical Properties
2.01 Approved Manufacturer/Product Cabinet: Baltic birch
Rigging inserts: 6 x fly tracks, + pole mount, aluminum side handles
Color: Black
A. RCF, Via Raffaello 13, 42100 Mancasale, Reggio Emilia, Italy. Grille: Custom perforated steel grille with open-cell
poly fiber backing
B. Model number: TT22
Input Connectors: Speakon NL4
Dimensions (H x W x D): 600x400x400 mm (23.62x15.74x15.74)
Weight: 28.8 kg (63.49 lbs.)

2.05 Accessories
115
[1.77"]

[4.53"]
[1.77"]

AC PM M20 M20 pole mount for TT22-A or TT25-A speakers.


45

45

ACS 260 Steel speaker floor stand, load capacity up to 60 kg.


ACS 140 Steel speaker floor stand, load capacity up to 40 kg.
Cover TT22 Protection cover for TT22.
AC DS4X Kit 4 hook kit for suspending fly track bar.
AC EB4X Kit including No. 4 shouldered 0.39 inch eye bolts.
AC NL4F 4X Kit 4 male Speakon connectors kit 4 poles.
[1.77"]
[1.77"]
45
45

400
185
[7.28"] [15.74"]
55

[23.62"]
600
[15.74"]

[12.20"]
400

310

[0.16"]

48
4.1

[2. 57.7
27
"]

115
[4.53"]
320.1
[12.60"]

RCF SpA Italy: RCF UK Sales Office: RCF France Sales Office: RCF Germany Sales Office: RCF USA Inc.:
tel. +39 0522 274 411 tel. +44 7005 402181 tel. +33 6 07501800 tel. +49 2203 925370 tel. +1 (603) 926 4604
fax +39 0522 232 428 e-mail: info@rcfaudio.co.uk e-mail: rcffrance@aol.com e-mail: germany@rcf.it e-mail: info@rcf-usa.com
www.rcfaudio.com
e-mail: info@rcf.it

You might also like