Professional Documents
Culture Documents
FAM BUSHING
HIGH RESISTANCE TO ABRASION AND HIGH CONTACT PRESSURE
IN SHOCK WORKING CONDITIONS, WITH NO MAINTENANCE.
FAM bushings manufactured from a manganese steel, have excellent
resistance to abrasive wear thanks to a mechanical work hardening of the
contact area and require only initial greasing.
HEF Group accepts no liability for any loss, damage or expense whatsoever arising directly or indirectly from the use of their products
Tolerances
sheet metal
Edition 2011 English (This edition replaces all earlier edition which are herewith rendered obsolete) - Non contractual document
- Lateral guide roller of sheet a) Interference
metal on shearing and slitting We recommend the assembly of our FAM bushings according to an interference fit
lines of H7/s7. However, under special working conditions (high loads, large diameters) the
- Joints of ingot guide rollers interference can be increased.
For further information, please contact HEF DURFERRIT.
on spraying column
Cement industry b) Clearance
- Joints and rollers of metallic
deck conveyor Bushing ID Bushing ID Tolerance Shaft tolerance
- Joints of extractor feeding
screw 25 mm < ID < 50 mm + 50 m - 100 m
+ 200 m - 150 m
Mining industry 50 mm < ID < 100 mm + 50 m - 200 m
- Joints of tunnel mining machines + 300 m - 250 m
100 mm < ID + 100 m - 250 m
Handling
+ 400 m - 300 m
- Joints of shoe brake
of rolling bridge crane Note: these clearances can be increased in case of high abrasive environments.
- Joints of grabs, clamps
Available basic forms
- Joints of clamshell bucket
- Joints of bridge crane spreader Different forms are available with FAM technology: bushings, flanged bushings, sphe-
rical plain bearings, sliding plates.