Professional Documents
Culture Documents
SCSVMV University
(University Established Under Section III of the UGC Act, 1956)
Accredited with B Grade by NAAC
Credits
For a course with three credits three lecture hours are assigned per week additionally with one tutorial
hour, so a three credit course has three plus one hour per week. Lab courses are assigned with two
credits. Each semester curriculum shall normally have a blend of theory and practical courses. For the
award of degree a student has to earn a minimum of 195 credits and also to serve in the NSS or NCC
for the least one year and enroll as a student member of a recognized professional society.
A newly admitted student will automatically be registered for the entire course prescribed for the first
year without any option.Every other student should submit a completed registration form indicating
the list of course intended to be credited during the next semester. This registration will be done i n
a week before the last working day of the current semester. Late registration with the approval of the
department along recommendation of the head of the department along with a late fee will be done
up to the last working day. Registration for the project work shall be done only for the final semester.
Assessment
The break up of assessment and examination marks for the theory subjects is as follows:
First Assessment : 15 marks
Final Assessment : 15 marks
Assignments : 10 marks
Examination : 60 marks
The break up of assessment and examination marks for the Practical subjects is as follows:
First Assessment : 15 marks
The project work marks comprises of two components. One component will be assessed by the
committee, consisting of the guide and a minimum of two members nominated by the Head of the
Department. The project work has to be carried out by the student in two phases, Project phase I and
Project Phase II. Phase I will have a credit of 2 and Phase II will have a credit of 4 totaling to 6 credits for
project.
One of the committee members will be nominated as the chairman by the head of the
department. The head of the department may himself be a member or the chairman. The second
component marks for the project work will be decided by viva voice examination at the end of the
semester.
Student Mentor
To help the students in planning the course of study and for general advice on the academic programme,
the head of the department will attach a certain number of students to a member of faculty who shall
function as student mentor for those students throughout their period of study. Such student
mentors shall advice the student, preliminary approval for the courses to be taken by the students
during each semester and obtain the final approval of the head of the department.
Class Committee
For all the branches of study during the first year, a common class committee will be constituted by the
dean of the faculty among the various teachers teaching the common subject to different classes
during the first year, the dean shall appoint one of them as course coordinator.
All heads of the departments, among whom one may be nominated as chairman by the dean. The Dean
may opt to be a member or the chairman.For each of the higher semester, separate class committees will
be constituted by the head of the department. The composition of the class committees from third to
Class In charge for the particular class shall be the Class Committee Coordinator .Along with him / her the
committee should have all the faculties handling the respective subjects for the class and two students
representatives .The Report of the Class committee meeting must be sent to Head of the Department for
any remedial actions.
A project co- ordinator (for the Seventh and Eighth semester only) who shall be appointed by the head
of the department among the project supervisors, teachers of other individual courses.
One professor or reader, preferably not teaching the concerned class appointed as chairman by the
head of the department.
The fourth meeting will be held after all the assessments are completed for all the courses and at
least one week before on the commencement of the examinations. During the meeting,
assessment in a maximum of 40 marks will be finalized for every student and tabulated and submitted
to the head of the department ( to the dean in the case of first year) for approval and submitted
to the controller of examinations.
Withdrawal from a course
A student can withdraw from a course at any time before a date fixed by the head of the
department prior to the final assessment, with the approval of the dean of the faculty on the
recommendation of head of the department.
A student can take a one time temporary break of study covering the current year / semester and /or
the next semester with the approval of head of the department, not later than seven days after
completion of the mid semester test. However, the student must complete the entire
programme within the maximum period of seven years.
The following minimum credits must be earned by the student to move to a higher semesters.
A student who has not fulfilled the NCC / NSS requirements will not be eligible to register for
the fifth semester.
Substitute Arrangement
A students who has missed the examination for genuine reason, may take a substitute assessment
for any one of the missed reasons accepted by the head of the department, one or more
assessments of a course. The substitute assessment must be completed before the date of the fourth
meeting of the respective class committees.
A student who wishes to have a substitute assessment for a missed assessment must apply to the head
of the department within a week from the date of the missed assessment.
Attendance Requirements
To be eligible to appear for the examination in a particular course, a student must put in
minimum of 80% in the course. However, if the attendance is 70% or above but less than 80% in any
course, the authorities can permit the student to appear for the examination in the course on payment of
the prescribed condition fees.
A student who withdraws from or does not meet the minimum attendance requirement in course must
re-register and repeat the course.
All assessments of all the courses on absolute marks basis will be considered and passing by the results
passing board in accordance with the rules of t he university. Thereafter, the controller of examinations
shall convert marks for each course to the corresponding letter grade as follows,
Compute the grade point average and cumulative grade point average, and prepare the grade cards.
A student who obtains less than 24 marks out of 60 in the examination or absent for the examination
will be awarded a s grade F.
A student who earns a grade of S, A, B, C, D, or E for a course is declared to have successfully completed
that course and earned credits for that course. Such a course cannot repeated by the student.
A student who obtains letter grade F in a course has to reappear for the examinations in that
course.
A student who obtains letter grade I or W in a course has to re -register and repeat the course.
The following grade points are associated with each letter grade and repeat the point average and
cumulative grade point average.
S - 10; A - 09; B - 08; C - 07; D - 06; E - 05; F - 0.
Course with grades I and W is not considered for calculation of grade point average or
cumulative grade point average. F grade will be considered for computing GPA and CGPA.
A student can apply for re - totaling for one or more of his/her examination answer papers
within a week from the date of issue of the grade sheet to the students on payment of prescribed
fee per paper. The application must be made to the controller of Examinations with the
recommendation of head of the department.
After results are declared, grade cards will be issued to the students. The grade cards will contain the list
of courses registered during the year / semester, the grades scored and the grade point average (GPA)
for the year / semester.
GPA is the sum of the products of the number of credits of a course with the grade point scored in that
course, taken over all the courses for the year/ semester, divided by the sum of the number of credits for
all courses taken in that year / semester. CGPA is similarly calculated considering all the courses taken
from the time of admission.
After successful completion of the programme, the degree will be awarded with the following
classification based on CGPA.
For First Class with Distinction the student must earn a minimum of 200 credits within four years
from the time of admission, pass all the courses in the first attempt and obtain a CGPA of 8.25 or
above.
For First Class the student must earn a minimum of 200 credits within five years from the time of
admission and obtain a CGPA of 6.5 or above.
For Second Class the student must earn a minimum of 200 credits within seven years from the time of
admission.
Electives
A part from the various elective courses offered in the curriculum of the branch of
specification, a student can choose any specialization under the faculty during the entire period of
study, with the approval of head of the department offering the course.
BE Programme curriculum
I SEMESTER
Total Credits 25
II SEMESTER
Sl.No Subject code Subject Name Credits
1. EN2T1 English II 3
III SEMESTER
IV SEMESTER
Sl.No Subject code Subject Name Credits
1. MB4T1 Applied Mathematics for Electrical Engineering- II 3
2. EE4T3 DC Machines and Transformers 3
3. EE4T4 Electronic Circuits 3
4. EE4T5 Electrical Engineering Materials 3
5. EE4T6 Network Analysis and Synthesis 3
6. Measurements and Instrumentation 3
7. SA4T4 Sanskrit and Indian Culture IV* 1
8. SS4P2 Soft Skills II * 1
Laboratory
1. EE4P6 Measurements and Instrumentation Lab 2
2. EE4P8 DC Machines and Transformers Lab 2
3. EE4P9 Electronic Circuits Lab 2
4. PT4P1 Industrial Training and Practice I * 1
Total Credits 25
V SEMESTER
Laboratory
1. EE5P7 Induction and Synchronous Machines Lab 2
2. EE5P8 Control Systems Lab 2
3. EE5P9 Linear and Digital IC Lab 2
Total Credits 25
VI SEMESTER
VII SEMESTER
VIII SEMESTER
Elective IV
1. EE8EH Power Plant Instrumentation 3
2. EE8EI PLC and Distributed control systems 3
3. EE8EJ Neural and Fuzzy system 3
4. EE8EK Intelligent Controllers 3
5. EE8EL Power System Stability 3
Computer Graphics Lab with three units as
6. CS8EM 3
theory in Computer Graphics
Minimum 30 Days of Industrial Practice must be done. The successful completion of the Industrial
Practice both I & II (along with mini project) will fetch one credit that will be awarded in sixth semester
after the student presenting certificate from the place of training.
* Soft Skills The syllabus and the course will be monitored by placement and training
cell, the course will be taught by our university faculties and end semester
examination will be practical.
** Industrial Practice This course will be handled by industrial expert only. Examination mode
will be practical cum viva voce.
*** Open Elective Students has to take one course from other department (from Non
Engineering department only). Faculties from other department will
handle the paper.
Subject
Sl.No. Subject Name Credits
code
1. OE5TA ASTRO PHYSICS 1
2. OE5TB BIOINFORMATICS 1
3. OE5TC BUSINESS ADMINISTRATION 1
4. OE5TD COMMUNICATION SKILLS 1
5. OE5TE FINANCE FOR NON FINANCE MANAGERS 1
6. OE5TF FRENCH PRIMER 1
7. OE5TG FUEL CELL & BATTERIES 1
8. OE5TH GERMAN PRIMER 1
9. OE5TI HINDI LITERATURE 1
10. OE5TJ HR MANAGEMENT 1
11. OE5TK INSTRUMENTAL METHODS OF CHEMICAL ANALYSIS 1
12. OE5TL JAPANESE 1
13. OE5TM KEYBOARD 1
14. OE5TN LOGISTICS AND SUPPLY CHAIN 1
15. OE5TO NANO TECHNOLOGY 1
16. OE5TP NUCLEAR AND PARTICLE PHYSICS 1
17. OE5TQ PSYCHOLOGY 1
18. OE5TR PANINI GRAMMAR 1
19. OE5TS STATISTICAL METHODS WITH EXCEL 1
20. OE5TT VIOLIN 1
21. OE5TU VOCAL MUSIC 1
I SEMESTER
EN1T1-ENGLISH I
OBJECTIVES:
To enhance students proficiency in English language skills.
To develop students ability to think analytically, speculatively, and imaginatively.
To help students see themselves as professionals, as part of a discipline with skills and abilities
valuable in business, teaching, publishing, etc.
OUTCOMES:
Learners should be able to
Speak convincingly, express their opinions clearly, initiate a discussion, negotiate, argue
using appropriate communicative strategies.
Write effectively and persuasively and produce different types of writing such as narration,
description, exposition and argument as well as creative, critical, analytical and evaluative writing.
Listen/view and comprehend different spoken discourses/excerpts in different accents.
UNIT I: 10
Technical Words, Phobia Words and Mania Words {List Enclosed}
UNIT II: 10
Functional Grammar
Parts of Speech, Articles, Prepositions, Verbs, Adverbs, Sentence Analysis, Tenses, Basic Patterns, Prefixes
and Suffixes, Syllabification and Spelling
UNIT III: 10
Essays
1. Spoken English and Broken English G.B. Shaw
2. Arguing - Robert Lynd
3. The Verger - Somerset Maugham
4. The Beauty Industry Aldous Huxley
UNIT IV: 10
Paragraph writing relating to Charts, Tables , graphs and Acronyms.
UNIT V: 10
Dialogue Writing, Advertisement.
L = 40 T = 10 TOTAL = 50
REFERENCE BOOKS:
1. Bikaram K. Das : Functional Grammar and Spoken and Written communication in English
(Orient Blackswan Chennai - 600002
2. T. M.Farhathullah : English Practice Book (Emerald Publishers)The prescribed Essays will be
compiled and edited by the staff of the Department of English.
I SEMESTER
.
OBJECTIVES:
This course equips students to have basic knowledge and understanding in solving algebraic,
transcendental equation numerically.
To make the student knowledgeable in the area of matrix theory so that he/ she will be familiar in
Matlab applications.
To familiarize the student with functions of several variables. This is needed in many branches of
engineering.
To make the student acquire sound knowledge of techniques in solving linear differential
equations that model engineering problems.
To acquaint the student with the concepts of vector differentiation needed for problems in all
engineering disciplines.
OUTCOMES:
The subject helps the students to develop the fundamentals and basic concepts in numerical
solution of algebraic , transcendental equation, eigen values and eigen vectors, differential
calculus and differtial equation , LDE, and vector differentiation. Students will be able to solve
problems related to engineering applications by using these techniques
UNIT I 10
NUMERICAL SOLUTION OF ALGEBRAIC, TRANSCENDENTAL EQUATION
Solution of algebraic and transcendental equations - Bisection method Method of successive
approximation-Method of false position (Regula-Falsi Method) - Newton-Raphson method-Horners
method-Secant method. Matlab applications.
UNIT II 10
EIGEN VALUES, EIGEN VECTORS
Rank of matrix Elementary transformation Elementary matrices-solution of linear system of equations-
Cramers rule-Matrix inversion method-Consistency of linear system of equations; Linear Transformations
Linear dependence of vectors Eigen values and Eigen vectors Properties of Eigenvalues Cayley
Hamilton theorem (without proof). Matlab applications
UNIT III 10
DIFFERENTIAL CALCULUS AND DIFFERENTIAL EQUATION
Function of two or more variables Partial derivatives Total derivative Taylors expansion Maxima
and Minima of functions of two variables Jacobians Homogenous functions - Eulers theorem for
homogeneous function Operator D Rules for finding Complementary function Inverse operator Rules
for finding particular Integral Working procedure to solve the equation - Method of undetermined
coefficients
UNIT-IV 10
LINEAR DIFFERENTIAL EQUATIONS
Method of variation of parameters- Equations reducible to linear equations with constant coefficients:
Cauchy's homogeneous linear equation , Legendre's linear equation - Linear dependence of solutions -
Simultaneous linear equations with constant coefficients
UNIT V 10
VECTOR DIFFERENTIATION
Differentiation of vectors - Curves in space - Velocity and acceleration - Scalar and vector point functions
vector operator Del- Del applied to scalar point functions : Gradient - Del applied to vector point
functions : Divergence and curl - Physical interpretation of divergence and curl-irrotational and solenoidal
vectors Del applied twice to point functions - Del applied to products of point functions-Conservative
vector field.
L = 40 T = 10 TOTAL = 50
1. Grewal B.S, Higher Engineering Mathematics, 43rd Edition, Khanna Publishers, New Delhi, 2014.
REFERENCE BOOKS:
I SEMESTER
PH1T3-ENGINEERING PHYSICS
OBJECTIVES:
To enhance the fundamental knowledge in Physics and its applications relevant to various
streams of Engineering and Technology.
OUTCOMES:
The students will have knowledge on the basics of physics related to properties of matter,
optics, acoustics etc., and they will apply these fundamental principles to solve practical
problems related to materials used for engineering applications.
UNIT I 10
PROPERTIES OF MATTER
(ELASTICITY)
Stress Strain Hookes law Elastic Behavior of Material Factors affecting elasticity Youngs
modulus by cantilever depression Non-uniform bending - Application -I-shaped girders. Torsional
Pendulum Couple per unit twist of a wire-Time period-Application- Determination of Rigidity Modulus.
UNIT II 10
TECHNICAL ACOUSTICS
ACOUSTICS
Acoustics of buildings Reverberation- Weber Fechner law- Factors affecting acoustics of a
building and remedies Noise Pollution Noise control in machines Sabines formula for standard
reverberation time- Absorption coefficient.
ULTRASONICS
UNIT III 10
PHOTONICS
LASER
Properties- Population inversion- Einsteins theory of stimulated emission of radiation - Different
types of Lasers Nd:YAG laser, CO2 laser Application of Lasers in holography.
FIBER OPTICS
Types of Optical Fibers (material, mode, index) Fiber losses acceptance angle Numerical
aperture applications in engineering (communication).
UNIT IV 10
CRYSTAL PHYSICS
Crystalline and amorphous solids lattice and unit cell seven crystal systems and Bravais lattices
- Crystal planes and directions- Miller indices-Expression for interplanar distance Atomic radius,
Coordination number and packing factor for simple structures: SC, BCC, FCC and HCP.
UNIT V 10
PHYSICS OF MATERIALS
DIELECTRIC MATERIALS
Definition Dielectric Breakdown Dielectric loss Internal field Claussius Mossotti relation.
SUPERCONDUCTING MATERIALS
Introduction Meissner effect Type I & Type II superconductors BCS theory-Applications.
NANOMATERIALS
Introduction Synthesis of nano materials Top down and Bottom up approach- Ball milling- PVD
method- Applications.
L = 40 T = 10 TOTAL = 50
TEXT BOOKS
1. Applied Physics for Engineers K.Venkatramanan, R.Raja, M.Sundarrajan (Scitech),6th Edition, 2009
2. Applied Engineering Physics Rajendran & Marikani (Tata McGraw Hill),
3. Modern Engineering Physics R.K.Gaur & S.L.Gupta, Dhanpat Rai publications, 2013
4. Modern Engineering Physics A.S.Vasudeva S.Chand & Company Ltd, 1999
5. Engineering Physics Bhattacharya, Bhaskaran Oxford Publications, 2010
6. Engineering Physics I & II G.Senthilkumar, VRB publications,1st Edition, 2011
REFERENCE BOOKS
1. Properties of Matter - D.S.Mathur (Unit I) ,
2. Sound - Brijilal & Subramanian (Unit II) , 2nd Edition.
3. Engineering Physics - M.N.Avadhanulu (Unit III) ,1992
4. Fiber Optics - R.Agarwal (Unit III) , 3nd Edition,2015
5. Solid state Physics C.Kittal (Unit IV), 8th Edition,2013
6. Modern Physics - R.Murugesan (Unit IV, V) , 2011 Edition
7. Fundamentals of Physics, 6th Edition, D. Halliday, R. Resnick and J. Walker, John
Wiley and Sons, New York.
I SEMESTER
OUTCOMES:
Ability to understand the basic concepts of electrical and electronics engineering.
UNIT -I 10
ELECTRICITY AND MAGNETISM:
Electric current Ohms law Temperature coefficient of resistance-Kirchhoffs laws
Electromagnetic induction: Relation between magnetism and electricity Production of induced E.M.F and
current Faradays laws of electromagnetic induction Direction of induced E.M.F and current-Flemings
Right rule-Lenzs law-Induced E.M.F Dynamically induced E.M.F-Statically induced E.M.F-Self inductance-
Coefficient of self inductance (L)-Mutual inductance Coefficient of mutual inductance(M) -Coefficient of
magnetic coupling-Inductances in series.
UNIT II 10
COMPLEX ALGEBRA AND A.C CIRCUITS:
Mathematical representation of vectors Symbolic notation Significance of operator j Conjugate
complex numbers Trigonometrical form of vector representation Exponential form of vector
representation Polar form representation Addition and subtraction of complex quantities
Multiplication and division of complex quantities Powers and roots of vectors Complex algebra applied
to series circuits Complex algebra applied to parallel circuits Series Parallel circuits.
UNIT III 10
THREE PHASE CIRCUITS:
Generation of three phase voltages Phase sequence Numbering of phases-Inter connection of three
phases Star or wye(Y) connections Voltages and currents in Y-connection Neutral current in
unbalanced star-connection Delta() or mesh connection Balanced Y/ and \Y conversions
Comparison: star and delta connections Comparison between single and three phase supply system -
Power factor improvement Power factor correction equipment Power measurement in three phase
circuits Three wattmeter method Two wattmeter method (Balanced and unbalanced load) Two
wattmeter method Balanced load Reactive power One wattmeter method.
UNIT IV 10
DIGITAL ELECTRONICS: Binary number system Logic gates Boolean algebra Half and Full adders Flip
Flops Registers and counters A/D and D/A conversion Basics only, Junction diodes basic types,
transistors basic types.
UNIT V 10
FUNDAMENTALS OF COMMUNICATION ENGINEERING:
Types of signals: Analog and digital signals Modulation and demodulation: Principles of amplitude and
frequency modulation. Communication systems: Radio, T.V, Fax, Microwave, Satellite and Optical fiber
(Block diagram approach only).
L = 40 T = 10 TOTAL = 50
TEXT BOOKS:
1. B.L.THERAJA-Fundamentals of Electrical Engineering and Electronics -2012 Edition, S.Chand
Publishers.
2. T.L.THYGARAJAN-Fundamentals of Electrical Engineering and Electronics - 2012 Edition, Scitech
Publishers.
3. V.K.MEHTA Principle of Electronics - 2012 Edition S.Chand Publishers.
I SEMESTER
CS1T5 - COMPUTER PROGRAMMING
OBJECTIVES:
Learn to think logically and write pseudo code or draw flow charts for problems.
OUTCOMES:
UNIT I 10
Introduction to digital computer ALU Memory Unit, Control Unit-Types of Computers-Number
Systems-Conversion Problems. DOS commands Computer Languages High Level, machine Level and
Assembly Level language Algorithm Flow Chart.
UNIT II 10
Introduction to C Character set, Constants, Variables, Data Types Operators Expression. Decision
Making statement Looping statements, break continue, goto functions.
UNIT III 10
Arrays and its types Functions call by reference storage classes in C Auto, Register, Static Extern
Recursive function.
UNIT IV 10
Structures and Unions, Introduction to Pointer, Pointer arithmetic, String operations.
UNIT V 10
User defined data types Introduction to Preprocessor, Macros, Files, Command line arguments
L = 40 T = 10 TOTAL = 50
TEXT BOOKS
REFERENCE BOOKS
1. Kernighan B.W and Ritchie,D.M , The C programming language: second edition, Pearson
education,2006
2. Fundamentals of Computing and Programming- V.Ramesh Babu, R.Samyuktha, M.Muniratham by
VRB Publishers 2012 edition.
3. Balagurusamy. E, Programming in ANSI C, Tata McGraw Hill, Third edition, 2006
I SEMESTER
OBJECTIVES:
OUTCOMES:
On Completion of the course the student will be able to perform free hand sketching of basic
geometrical constructions and multiple views of objects.
Do orthographic projection of lines and plane surfaces.
Draw projections and solids and development of surfaces.
Prepare isometric and perspective sections of simple solids.
Demonstrate computer aided drafting.
UNIT I 10
PROJECTION OF POINTS
Introduction to orthographic projections - Projection of points
PROJECTION OF LINES
Projection of straight lines in the first quadrant, lines parallel to both planes - inclined to one plane and
parallel to other - inclined to both planes.
UNIT II 10
PROJECTION OF SOLIDS
Projection of Simple solids like prism, pyramid, cylinder, cone and sphere - Auxiliary projections.
UNIT III 10
SECTION OF SOLIDS
Section of solids like prism, pyramid, cylinder, cone and sphere in simple position - True shape of sections
for the above.
DEVELOPMENT OF SURFACES
Surfaces like - Prism, Pyramid, Cylinder, Cone and Cut solids.
UNIT IV 10
ORTHOGRAPHIC PROJECTION
Conversion of pictorial views to orthographic views of simple machine members.
INTERPENETRATION OF SOLIDS
Interpenetration of solids - Cylinder and cylinder, cone and cylinder
UNIT - V 10
ISOMETRIC PROJECTIONS
Isometric Projections of solids.
PERSPECTIVE PROJECTIONS
Perspective projections of solids.
UNIT - VI (Not for examination)
COMPUTER AIDED DRAFTING (DEMONSTRATION ONLY)
TEXT BOOKS
1 Engineering Drawing - K. Venugopal, Wiley Eastern Ltd., 1922.
2 A text book of Engineering Drawing - K.V. Natarajan.
REFERENCE BOOKS
1 Elementary Engineering Drawing (First Angle Projection) N.D. Bhatt, Charotar publishing Co.,
Anand.
2 Engineering Drawing - S.M. Sekkilar & S. Tamarai Selvi, Anuradha Agencies, Kumbakonam.
3 Engineering Drawing and Graphics - Prof. K.Venkataraman.
I SEMESTER
OBJECTIVES:
Message of Paramacharya.
OUTCOMES:
The course provides an introduction and understanding about Sanskrit and the elements of
ancient Indian Culture. The objective of the course is to make students to get an idea about the
significance of Sanskrit Language and its relations with other languages, introduction to Vedic
Literature.
UNIT I 10
UNIT II 10
UNIT III 10
UNIT IV 10
10. Introduction to Dhanurveda - the Indian Martial Art, History of Dhanurveda, Dhanurveda and its
impacts in the regional styles
11. Introduction to Gndarvaveda
12. Text on dramaturgy and music
UNIT V 10
13. Introduction to Arthastra - the Indian statecraft, economic policy and military strategy
14. Relevance of Arthastra to the present days
15. Message of Paramacarya
L = 40 T = 10 TOTAL = 50
REFERENCE TEXTS
1. A text book of elementary Linguistics and Phonetics by Dr. R. Ravi S Sharma, New Delhi 2012
2. A history of Sanskrit literature by A. B. Keith New Delhi 1993
3. A history of Indian literature by Maurice Winternitz New Delhi 1990
4. Samskruta Sahitya Ka Itihas - by Baladev Upadyaya
5. A short history of Sanskrit Literature by T.K. Balachandra Iyer, Palaghat 1998
I SEMESTER
OBJECTIVES:
To introduce different experiments to test basic understanding of physics concepts applied in
optics, thermal physics and properties of matter.
OUTCOMES:
The hands on exercises undergone by the students will help them to apply physics principles of
optics and thermal physics to evaluate engineering properties of materials.
Any SIX
9. Determination of number of lines per meter of the grating using normal incidence
method.
I SEMESTER
LIST OF EXPERIMENTS:
1. Evaluate Expressions using library Function.
a. r2
b. (A+B+(2C/3A)+A2+2B)
c. S(S-A) (S-B) (S-C)
d. LOG(X3+Y3+Z3)
6. Find the sum of digits using (i) For loop (ii) While loop
13. Display the student information & marks using Structure & Unions.
I SEMESTER
EE1P9 - BASIC ELECTRICAL WORKSHOP
OBJECTIVES:
To provide exposure to the students with hands on experience on various basic electrical
engineering
To study about CRO, Starters and Logic Gates
To study about measurement of electrical quantities.
OUTCOMES:
Ability to layout the residential house wiring using switches, fuse, etc..
Ability to measurement of electrical quantities like voltage power current and power factor using
meters.
To understand the basic operations of CRO and Logic gates.
LIST OF EXPERIMENTS:
II SEMESTER
EN2T1 - ENGLISH II
OBJECTIVES
To enhance students proficiency in English language skills.
To develop students ability to think analytically, speculatively, and imaginatively.
To help students see themselves as professionals, as part of a discipline with skills and abilities
valuable in business, teaching, publishing, etc.
To provide students with sophisticated writing and critical thinking skills useful not only in the
academy but also in the world at large.
OUTCOMES:
Speak convincingly, express their opinions clearly, initiate a discussion, negotiate, argue
using appropriate communicative strategies.
Write effectively and persuasively and produce different types of writing such as narration,
description, exposition and argument as well as creative, critical, analytical and evaluative writing.
Llisten/view and comprehend different spoken discourses/excerpts in different accents.
UNIT I : 10
Words for Social Interaction {List Enclosed}
UNIT II: 10
Functional Grammar
Noun Group, Verbal Group, Modal Verbs, Conditionals, Connectives, Passivity, Gerund and Infinitives,
Reported Speech, Synonyms and Antonyms, Concord and Error detection.
UNIT IV: 10
Letter Writing, Report Writing, Essay Writing (Essays on Sports Social Issues, Science and Technology and
Proverb Expansions) and Comprehension.
UNIT V: 10
British English and American English With Emphasis on Vocabulary and Spelling (From Readers Digests
Publication)
L = 40 T = 10 TOTAL = 50
REFERENCE BOOKS:
3. Bikaram K. Das : Functional Grammar and Spoken and Written communication in English
(Orient Blackswan Chennai - 600002) ,
4. T. M.Farhathullah : English Practice Book (Emerald Publishers)
The prescribed Essays will be compiled and edited by the staff of the Department of English.
II SEMESTER
To acquaint the student with mathematical tools needed in solving simultaneous equations
numerically.
To develop the use of matrix algebra techniques and to have acquired the technique of diagonal
zing a matrix this would render the eigensolution procedure very simple. This is needed by
engineers for practical applications.
To introduce the concepts of Reduction formula and to acquaint the student with mathematical
tools needed in evaluating multiple integrals and their usage.
To introduce the concepts of double integrals, Gamma, Beta functions and triple integrals which
are needed in engineering applications
To acquaint the student with the concepts of vector calculus needed for problems in all
engineering disciplines.
OUTCOMES:
The subject helps the students to develop the fundamentals and basic concepts in Numerical
solution of simultaneous equations, orthogonal reduction, Integral calculus, Beta and Gamma
function and Vector Integration. Students will be able to solve problems related to engineering
applications by using these techniques.
UNIT I 10
NUMERICAL SOLUTION OF SIMULTANEOUS EQUATIONS
Solution of linear simultaneous equations - Direct methods of solution: Gauss elimination method ,
Inversion of a matrix using Gauss Elimination method- Gauss Jordan method Method of Factorization-
Crouts method, Iterative methods of solution : Jacobis method , Gauss Seidel method.
UNIT II 10
ORTHOGONAL REDUCTION
Orthogonal transformation-Reduction to diagonal form Similarity matrices Powers of a matrix -
Reduction of quadratic form to canonical form Nature of a quadratic form Hermitian, Skew Hermitian
and Unitary matrices Outline of applications of Eigen values and Eigen vectors in engineering
UNIT III 10
INTEGRAL CALCULUS AND ITS APPLICATIONS
Reduction formulae reduction formulae[without proof] and Bernoullis formula.Definite integrals ,
length of the curve. Double integrals - Change of order of integration - Double integrals in polar
coordinates - Areas enclosed by plane curves - Triple integrals Volume as double integrals - Volume as
triple integral
UNIT IV 10
BETA AND GAMMA FUNCTIONS
Change of variables in double integrals and Triple integrals Area of a curved surface Beta function -
Gamma function Reduction formula for ( n ) - Relation between Beta and Gamma functions Outline
of applications of multiple integrals
UNIT V 10
VECTOR INTEGRATION
Integration of vectors - Line integral-circulation-work - Surface integral - Green's theorem in
the plane (without proof) - Stoke's theorem (without proof) - Volume integral - Gauss divergence
theorem (without proof) - Irrotational fields Outline of applications of vector calculus in
engineering.
L = 40 T = 10 TOTAL = 50
TEXT BOOK:
1. Grewal B.S, Higher Engineering Mathematics, 43rd Edition, Khanna Publishers, New Delhi,
2014.
REFERENCE BOOKS:
II SEMESTER
CH2T3-ENGINEERING CHEMISTRY
OBJECTIVES:
To make the students conversant with basics of polymer chemistry.
To make the student acquire sound knowledge of second law of thermodynamics and second law
based derivations of importance in engineering applications in all disciplines.
To acquaint the student with concepts of important photophysical and photochemical processes
and spectroscopy.
To develop an understanding of the basic concepts of phase rule and its applications to single and
two component systems and appreciate the purpose and significance of alloys.
To acquaint the students with the basics of nano materials, their properties and applications.
OUTCOMES:
The knowledge gained on polymer chemistry, thermodynamics. spectroscopy, phase rule and
nano materials will provide a strong platform to understand the concepts on these subjects for
further learning.
UNIT-I 10
CHEMICAL THERMODYNAMICS
Introduction - Limitations of first law different statements of second law (Clausius and Kelvin) Entropy
entropy change for a reversible process entropy change for an isothermal expansion of an ideal gas
problems Free energy - Work function Gibbs Helmholtz equation and its applications - Vant hoff
isotherm and isochore applications.
UNIT-II 10
Kinetics of second order reactions half life period saponification of ester kinetics of opposing, parallel
reactions and its examples - effect of temperature on reaction rate theory of absolute reaction rate.
Classification and characteristics of catalysts autocatalysis steady state principle - enzyme catalysis
Michaelis menton equation (derivation) types of acid base catalysis
UNIT-III 10
UNIT IV 10
UNIT-V
L = 40 T = 10 TOTAL = 50
TEXT BOOK
1. Engineering Chemistry, P.C. Jain and Monika Jain, Dhanpat Rai Publishing Co Pvt. Ltd., New Delhi,
2008.
REFERENCE BOOKS
1. Principles of Physical Chemistry, B.R. Puri, L.R. Sharma and Madan S. Pathania, Shoban Lal Nagin
Chand & Co., Jalandhar, 2000.
2. Physical Chemistry for Engineers, P.C. Jain and Renuka Jain, Dhanpat Rai & sons, New Delhi, 2001.
3. Applied Chemistry, K. Sivakumar, Anuradha Publications, Chennai, 2009.
4. Chemistry in Engineering & Technology, J.C. Kuriacose and J. Rajaram, Vol. 1, Tata McGraw-Hill, New
Delhi, 1996.
II SEMESTER
ME2T4 - BASIC CIVIL AND MECHANICAL ENGINEERING
OBJECTIVES
To impart basic knowledge on Civil and Mechanical Engineering.
To explain the materials used for the construction of civilized structures.
To make the understand the fundamentals of construction of structure.
To explain the component of power plant units and detailed explanation to IC engines their
working principles.
To explain the R & AC system.
OUTCOMES:
Ability to explain the usage of construction material and proper selection of construction
materials.
Ability to design building structures.
Ability to identify the components use in power plant cycle.
Ability to demonstrate working principles of petrol and diesel engine.
Ability to explain the components of refrigeration and Air conditioning cycle.
PART A
CIVIL ENGINEERING
UNIT - I
BUILDING MATERIALS: Construction Materials and foundation Properties and uses of construction
materials such as stone, bricks, cement, concrete, steel.
BUILDING COMPONENTS: Selection of site - simple foundations such as well footing- isolated footing.
Combined footing. Pile foundation - foundations of machinery. Superstructure Brick and stone masonry -
beams. Columns and lintel RCC roofing - simple steel roof trusses and AC roofing - Flooring types such as
granolithic. Concrete, mosaic, tile, terrazzo, marble etc., - plastering.
VALUATION: Valuation by plinth area method -simple problems.
UNIT - II
MECHANICS UNITS - Simple stresses and stains for uniform section - Moduli of elasticity - Factory of safety
- centre of gravity and moment of inertia - simple problems. DAMS Selection of site - Brief idea of different
types of dams - their purpose. BRIDGES Components of bridge - classification - slab bridge I - bean bridge.
UNIT - III
SURVEYING - Different types of surveying - chain survey - calculation of area by Simpsons rule and
trapezoidal rule - compass - conversion on bearings - simple leveling - reduction of levels - simple
problems. ROAD Classification - brief description of earthen road. Water bound macadam. Bituminous.
Concrete roads - traffic signs and signals. ENVIONMENTAL ENGINEERING Protected water supply - sewage
treatment - septic tanks.
PART B
MECHANICAL ENGINEERING
UNIT - I
BOILERS - Classification - Principles of Low pressure steam generators simple Vertical Boiler, Cochran
Boiler, Locomotive Boiler, Lancasier Boiler, Bop-cock Wilcox Boiler POWER PLANTS Layout of Steam, Gas
Turbine, Diesel, Nuclear and Hydropower Plants. NEW SOURCES OF ENERGY Study of different types
of alternative energy sources - Solar, Wind, Wave, Tidal and Geo - thermal.
UNIT - II
INTERNAL COMBUSTION ENGINES - Working principles of Petrol and Diesel Engines - Two stroke and Four
stroke cycles-Function of main components - single jet carburetion - ignition. Cooling and lubrication
systems - fuel pump and injector.
METAL CASTING PROCESS - Patterns - Types of patterns - Pattern materials - pattern allowances - Molding
sand - Properties of molding sand - types of molding - preparation of Green sand mould for casting -
melting of cast iron in cupola furnace only - casting defects.
UNIT - III
METAL FORMING PROCESS - Principles of Forging. Rolling, Drawing and Extrusion.
METAL JOINING PROCESS Principles of welding - fundamental of Arc welding. Gas welding and gas cutting -
Brazing and soldering.
METAL MACHINING PROCESS - Types of lathes - Main components and the functions of a centre lathe -
operations - cutting tools - Drilling machines.
L = 40 T = 10 TOTAL = 50
TEXT BOOKS:
1 Basic Civil Engineering- V. Ramesh Babu, Anuradha Agencies, Kumbakonam, 3rd Edition 2014
2 Basic Civil Engineering- K.V. Natarajan, Madras,
3 Basic Mechanical Engineering- K.Venugopal, Anuradha Agencies, Kumbakonam,2014
REFERENCE BOOKS:
1 Basic Civil Engineering - N. Arunachalam, Pratheeba Pub. Coimbatore.
2 Basic Civil and Mechanical Engineering - G. Shanmugam and M.S. Palanichamy, Tata McGraw Hill
Publishing Co., 1993.
II SEMESTER
EE2T5 - ELECTRIC CIRCUIT THEORY
(Common to EEE, ECE, EIE & Mechatronics)
OBJECTIVES:
To introduce electric circuits and its analysis
To impart knowledge on solving circuits using network theorems
To introduce the phenomenon of resonance in coupled circuits.
To educate on obtaining the transient response of circuits.
To Phasor diagrams and analysis of three phase circuits
OUTCOMES:
Ability analyses electrical circuits
Ability to apply circuit theorems
Ability to analyze AC and DC Circuits
UNIT I 10
BASIC CIRCUIT CONCEPTS
Lumped circuits Kirchhoffs Laws Voltage - Current relationships of R, L and C Independent sources
Dependent sources Simple resistive circuits Network reduction Voltage division Current division
Source transformation.
UNIT II 10
SINUSOIDAL STEADY STATE ANALYSIS
Phasor Sinusoidal steady state response concepts of impedance and admittance- analysis of simple
circuits Power and Power factor series resonance and parallel resonance Bandwidth and Q factor.
Solution of three-phase balanced circuits Power measurements by two-wattmeter methods Solution of
three-phase unbalanced circuits.
UNIT III 10
MESH-CURRENT AND NODE-VOLTAGE METHODS
Formation of matrix equations and analysis of complex circuits using mesh-current and nodal-voltage
methods Mutual inductance Coefficient of coupling Ideal transformer.
UNIT IV 10
NETWORK THEOREMS AND APPLICATIONS
Superposition theorem Reciprocity theorem Compensation theorem Substitution theorem
Maximum Power transfer theorem Thevenins theorem Nortons theorem and Millmans theorem with
applications.
UNIT V 10
TRANSIENT ANALYSIS
Forced and free response of RL, RC and RLC circuits with D.C. and sinusoidal excitations.
L = 40 T = 10 TOTAL = 50
TEXT BOOKS:
1. Paranjothi S.R.,Electric Circuit Analysis, New Age International Ltd., Delhi, 2nd Edition.
2. Hyatt W.H. and Kemmerly, Engineering Circuits Analysis, McGraw- Hill International Editions, 1993.
REFERENCE BOOKS:
1. Edminister J.A., Theory and Problems of Electric Circuits, Schaums outline series McGraw Hill Book
Company, 2nd Edition, 1983.
2. Sudhakar A and Shyam Mohan S.P., Circuits and Network Analysis and Synthesis, Tata McGraw-Hill
Publishing Ltd., New Delhi, 1994.
II SEMESTER
OBJECTIVES:
To appreciate the importance of environment by assessing its impact on the human world;
envision the surrounding environment, its functions and its value.
To study the dynamic processes and understand the features of the earths interior and surface.
To study the integrated themes and biodiversity, natural resources, pollution control and waste
management.
OUTCOMES:
Development and improvement in std. of living has lead to serious environmental disasters
UNIT I 10
INTRODUCTION TO ENVIRONMENT AND ENVIRONMENTAL STUDIES
1.1. Introduction to environment components nature of environment - need of awareness reasons for
environmental problems anthropocentric and eco centric views.
1.2. Environmental studies - multidisciplinary nature scope and aim sustainable development-
principles RRR concept-Indian environmental movements environmental calendar.
UNIT II 10
ECOSYSTEM AND BIODIVERSITY
2.1. Ecosystem structure functions simplified ecosystem models (food chain and food webs and their
types, energy flow) - forest grassland pond ecosystems ecological succession - ecological pyramids
Bio-geochemical cycles of water oxygen-carbon-phosphorous and sulphur.
2.2. Biodiversity definition types species genetic and ecosystem diversities- values of biodiversity
threats to biodiversity conservation of biodiversity endemism biodiversity hotspots Indian
biodiversity endemic species of India IUCN lists -red-green and blue data books.
UNIT III 10
NATURAL RESOURCES
3.1 Natural resources definition types forest resources uses deforestation- reasons - effects
water resources dams effects of dams - food resources modern agriculture ill effects -energy
resources- types hydel nuclear solar wind and biomass energy - world scenario Indian scenario.
3.2 Population and environment reasons for over exploitation of resources population demography
population curves population explosion effects consumerism effects urbanization reasons and
effects- role of an individual.
UNIT IV 10
ENVIRONMENTAL POLLUTION
4.1 Pollution definition types air pollution causes and effects effects of CO2 CO NOx SOx
particulates control of air pollution water pollution causes effects remedies soil pollution solid
waste management e waste ill effects of e-waste proper recycling- Noise pollution reasons effects
control nuclear pollution cases effects and control thermal pollution causes effects and
remedies.
4.2 Legal provisions for protecting environment article 48 A 51 A (g) Environment act 1986 Air act
1981 Water act 1974 wild life protection act Forest act 1980- problems in implementationreasons.
UNIT V 10
SOCIAL ISSUES AND ENVIRONMENTAL ETHICS
5.1 Present environmental scenario green house effect climate change The Kyoto Protocol ozone
layer depletion-The Montreal Protocol - acid rain causes effects - disparity among the nations The
Copenhagen UNFCCC summit carbon currency- virtual water- genetically modified organisms, Disaster
management.
5.2 Environmental ethics introduction people getting affected - resettlement and rehabilitation
issues involved Sardhar Sarovar project Tawa Matsya sang - Melting icebergs of Arctic.
L = 40 T = 10 TOTAL = 50
TEXT BOOK
1. Anubha Kaushik and C.P. Kaushik, Prospects of Environmental Science, New Age International
publishers, 2013.
REFERENCE BOOKS
1.Environmental Studies, N. Nandini, N. Sunitha and Sucharita Tandon, Sapna Book House, 2007.
3. Text book of Environmental Chemistry and Pollution Control, S.S.Dara, S.Chand and Co., 2002.
5. Environmental Chemistry, Gary W. VanLoon and Stephen J.Duffy, Oxford University Press, 2000.
6. New Trends in Green Chemistry, V.K. Ahluwalia and M. Kidwai, Anamaya Publishers, 2006.
II SEMESTER
OBJECTIVES:
The course provides an understanding about the elements of ancient Indian Culture. The objective
of the course is to make students to get an idea about the Vedangas, Epics Sanskrit Poets and their
works and System of Indian Philosophy.
OUTCOMES:
Introduction to Vedangas.
Introduction to Classical Literature.
Introduction to Epics & Puranas.
Introduction to Sanskrit Poets and their works.
Introduction to the System of Indian Philosophy.
UNIT I 10
1. Introduction to Vedgas
2. Introduction to ik, Vykaraa, Chandas
3. Introduction to Nituktam, Jyotia, Kalpa
UNIT II 10
13. Introduction to System of Indian philosophy, Six Daranas and their profounder, principles of
Nyya and Vaieika schools
14. Valid means of Skya philosophy and its significance, Yoga and Patajali, Agayoga and its
application
15. Introduction to (Manu and Ygyavalkya)
REFERENCE BOOKS:
II SEMESTER
OBJECTIVES:
To make the student to acquire practical skills in the determination of water quality
parameters through volumetric and instrumental analysis.
To acquaint the students with the determination of molecular weight of a polymer by
vacometry.
OUTCOMES:
The students will be outfitted with hands-on knowledge in the quantitative chemical
analysis of water quality related parameters.
LIST OF EXPERIMENTS
II SEMESTER
OBJECTIVES:
To provide practical experience with simulation of electrical circuits and verifying circuit theorems.
OUTCOMES:
Ability to understand and apply circuit theorems and concepts in engineering applications.
II SEMESTER
OUTCOMES:
Student will be able to make various joints in the given object with the available work material.
Student will be able to know how much time a joint will take for the assessment of time
CARPENTRY
Names and uses of tools used in carpentry - Handling of the tools. Practice in marking, sawing,
planning and chiseling to size. Making simple joints such a half lap, mortises and Tenon joints.
FITTING
Name and uses of tools like files, chisels, hammer, tri square, calipers, hacksaw, etc., and handling
of these tools. Practice in marking, chipping, fitting to size and drilling marking of simple mating, profiles
such as Vee , Square.
WELDING
Study of Arc & Gas Welding, Tools and Equipments Simple welding exercises Butt welding and
Lap Welding.
TURNING
Study of Centre Lathe, Accessories and tools Simple turning exercises Facing and Step turning -
use of measuring Instruments for lathe work.
DRILLING
Study of drilling machines Drills, Taps, and reamers Demonstration of Drilling and Tapping
operations.
III SEMESTER
UNIT III 10
INTERPOLATION AND NUMERICAL INTEGRATION
Interpolation with equal intervals Newtons forward interpolation formula Newtons backward
interpolation formula - Interpolation with unequal intervals: Lagranges interpolation formula, Newtons
divided difference formula - Numerical integration: Trapezoidal rule - Simpsons one-third rule - Simpsons
three-eighth rule Outline of applications of interpolation and numerical integration in engineering.
UNIT IV 10
FOURIER TRANSFORMS AND APPLICATIONS
Fourier integral theorem (without proof) - Fourier Sine and Cosine integrals Complex form of Fourier
integral - Fourier integral representation of a function - Fourier transform Fourier sine and Cosine
transforms Properties of Fourier Transforms: Linear property, Change of scale property, Shifting
property - Parsevals identity for Fourier transforms (without proof) Application of transforms to
boundary value problems: Heat conduction, Vibrations of a string, Transmission lines.
UNIT V 10
Z TRANSFORM AND APPLICATIONS
n p
Standard z-transforms of 1, a , n Linearity property Damping rule Shifting rules Multiplication by
n - Initial and final value theorems (without proof) inverse z transforms Convolution theorem
(without proof) Convergence of z-transforms Two sided z-transform Evaluation of inverse z-
transforms: Power series method, Partial fraction method, inversion integral method Application to
difference equations Outline of applications of z-transform in engineering
Note: Questions are to be set on problem solving and not on the theoretical aspects.
L = 40 T = 10 TOTAL = 50
TEXT BOOK:
1. Grewal B.S, Higher Engineering Mathematics, 43rd Edition, Khanna Publishers, New Delhi, 2014.
REFERENCE BOOKS:
III SEMESTER
EE3T2 - ELECTROMAGNETIC THEORY
OBJECTIVES:
To introduce the basic mathematical concepts related to electromagnetic vector fields
To impart knowledge on the concepts of electrostatics, electrical potential, energy density and
their applications.
To impart knowledge on the concepts of magnetostatics, magnetic flux density, scalar and vector
potential and its applications.
To impart knowledge on the concepts of Faradays law, induced emf and Maxwells equations
To impart knowledge on the concepts of Concepts of electromagnetic waves and Pointing vector
OUTCOMES:
Ability to understand and apply basic science, circuit theory, Electro-magnetic field theory
control theory and apply them to electrical engineering problems.
UNIT I 10
ELECTROSTATICS
The field concept Sources of electromagnetic fields.-Charges Columbs Law
electric field intensity Electric flux Gausss law Potential Boundary value problems
Laplace and Poissons equations Electrostatic energy Dielectrics Capacitance.
UNIT II 10
MAGNETOSTATICS
Current density Magnetic field Magnetic flux Biot Savarts Amperes law Torque Force
Vector potential Boundary value problem.
UNIT III 10
ELECROMAGNETIC FIELDS
Faradays Law Lenzs law Maxwells equations Displacement current Eddy current
Relation between field theory and circuit theory.
UNIT IV 10
ELECTROMAGNETIC WAVES
Generation Propagation of waves in dielectrics Conductors and Transmission lines Pointing vector
Skin effect.
UNIT V 10
FIELD MODELLING AND COMPUTATION
Problem formulation Boundary conditions Solutions Analytical methods Variables
Separable methods Conformal transformation Method of images Numerical methods Finite
difference method Finite element method Charge Simulation Method.
L = 40 T = 10 TOTAL = 50
TEXT BOOKS:
1. John D Kraus, Electromagnetics, McGraw-Hill Book Co., New York, Third Edition, 1989.
2. Joseph A Edminister, Theory and Problems of Electromagnetics, McGraw-Hill book
company New York, 1986.
3. William H.Hayt, Engineering Electromagnetics, Tata McGraw-Hill Edition, New Delhi, 1998.
REFERENCE BOOKS:
1.David J Griffith, Introduction to Electrodynamics, Prentice Hall of India Pvt. Ltd, New Delhi,
Second Edition, 1997.
2.Richard E. Dubroff, S.V.Marshall, G.G.Skitek, Electromagnetic Concepts and
Applications, Fourth Edition, Prentice Hall of India Pvt. Ltd., New Delhi, 1996.
3.Kraus and Fleish, Electromagnetics with Applications, McGraw-Hill International Editions
5th Edition 1999.
III SEMESTER
CS3T3 - OBJECT ORIENTED PROGRAMMING
OBJECTIVES
To familiarize the Object Oriented Programming (OOP) concepts, such as abstraction
encapsulation, instances, initializations, polymorphism, overloading, inheritance and generic
programming
To learn the OOP specific programming languages such as C++
To write programs to solve problems using the OOP language constructs rather
than structural programming.
To understand and know the importance of OOP in real-world problems
OUTCOMES:
Upon completion of the course,the students will be able to
Design problem solutions using Object Oriented techniques
Apply the concepts of data abstraction,encapsulation,polymorphism,overloading and inheritance
for problem solutions
Use the OOP Concepts of C++ in problem solving
UNIT I 10
UNIT II 10
UNIT III 10
UNIT IV 10
TEMPLATE AND STRING MANIPULATION
Class Templates function Template - Dynamic memory allocation pointers new and delete
operators static members friend classes friend functions manipulation of strings.
UNIT V 10
ADVANCED FEATURES
Exception handling working with files file stream operations file modes read ( ) &
write operation - error handling during file operations command line arguments.
L = 40 T=10 TOTAL = 50
TEXT BOOKS:
1. E. Balagurusami, Object oriented programming with C++, TATA MCGraw Hill.
2. K.R.Dittrichetal , Object Oriented Database System, Springer Verlag, 1991.
REFERENCE BOOKS:
1. Bertrand Meyer, Object Software Construction, Prentice Hall, 1988.
2. Baarkakati.N, Object Oriented Programming in C++, Prentice Hall of India, 1997.
III SEMESTER
EE3T4 - ELECTRON DEVICES
OBJECTIVES:
To acquaint the students with construction, theory and characteristics of the following electronic devices:
OUTCOMES:
To explain the structure of basic electronic devices.
To design applications using basic electronic devices.
UNIT I 10
SEMICONDUCTOR DIODE
Energy bands in solids, Insulators, Semi-conductors and metals - Review of Extrinsic semi-
conductors, mobility, conductivity, drift and diffusion currents in semi-conductors - Theory of p-n
junction -PN Junction as diode - p-n diode currents - volt- amp characteristics - diode resistance -
temperature effect of p-n junction - diode switching times - avalanche breakdowns, Tunnel diode
clipper, clamper, Zener voltage regulator.
UNIT II 10
BI-POLAR TRANSISTOR
Junction transistor transistor construction detailed study of currents in transistor input and output
characteristics of CE, CB and CC configurations transistor hybrid model for CE configuration
analytical expressions for transistor characteristics transistor switching times voltage rating power
transistors.
UNIT III 10
FIELD EFFECT TRANSITORS
Junction field effect transistor pinch off voltage JFET volt-ampere characteristics JFET small
signal model MOSFETS and their characteristics FET as a variable resistor.
UNIT IV 10
OPTO ELECTRONIC DEVICES
Photo emissivity and photo electric theory theory, construction and characteristics: light emitting
diodes liquid crystal cell seven segment display photo conductive cell photodiode solar
cell photo transistor opto couplers laser diode.
UNIT V 10
POWER DEVICES
UJT -Construction and characteristics. Switching Mechanism, SCR-VI characteristics - Triggering and
commutation method-applications of SCR, Protection of SCR characteristics and applications of Triac
and Diac.
L = 40 T=10 TOTAL = 50
TEXT BOOKS:
1. Jacob.Millman, Christos C.Halkias, Electronic Devices and Circuits, Tata McGraw Hill
publishing Limited, New Delhi - Reprint 2003.
2. David A.Bell, Electronic Devices and Circuits, Prentice Hall of India Private Limited,
New Delhi - 2003.
REFERENCE BOOKS:
1. Ben G.Streetman and Sanjay Banerjee, Solid State Electronic Devices, Pearson
Education Asia, New Delhi Reprint 2002.
2. Allen Mottershead, Electronic Devices and Circuits, Prentice Hall of India, Private
Limited, New Delhi-2003.
3. Theodre.F.Boghert, Electronic Devices & Circuits, Pearson Education,VI Edition,2003.
III SEMESTER
ME3T4 - THERMODYNAMICS
OBJECTIVES:
OUTCOMES:
Upon completion of this course, the students can able to apply the Thermodynamic Principles to
Mechanical Engineering Application.
Apply mathematical fundamentals to study the properties of steam, gas and gas mixtures.
Apply the different gas power cycles and use of them in Internal Combustion Engines.
Apply the different gas power cycles and use of them Steam boilers and Turbines, Compressors
and Refrigeration and Air conditioning systems
Apply different heat transfer principles of different applications.
UNIT I 10
UNIT II 10
POWER CYCLES AND INTERNAL COMBUSTIONS ENGINES
Carnots cycle otto cycle diesel cycle dual cycle brayton cycle air standard efficiency two
stroke and four stroke engines SI and CI engines-gas turbine operation.
UNIT III 10
STEAM BOILERS AND TURBINES
Steam properties use of steam tables and charts steam power cycle boilers and accessories boiler
testing layout of thermal power stations steam turbines impulse and reaction turbine
compounding of turbines simple velocity diagrams.
UNIT IV 10
AIR COMPRESSORS, REFRIGERATION AND AIR CONDITIONING
Reciprocating and rotary compressors staging compressor work vapour compression-
refrigeration cycle applications-air conditioning system layout- selection.
UNIT V 10
HEAT TRANSFER
Conduction plane wall, cylinder, sphere, composite walls critical insulation thickness simple fins
convection free convection and forced convection flow over flat plates and flow through pipes
empirical relations radiation Black body grey body radiation exchanges cooling of machines.
L = 40 T=10 TOTAL = 50
TEXT BOOKS:
REFERENCES:
III SEMESTER
ME3T5 - APPLIED MECHANICS AND FLUID MACHINERIES
OBJECTIVES:
To understand the stresses developed in bars, compounds bars, beams, shafts, cylinders and
spheres.
The applications of the conservation laws to flow through pipes and hydraulic machines are
studied.
To understand the importance of various types of flow in pumps and turbines.
OUTCOMES:
Upon completion of this course, the students can able to apply mathematical knowledge to
calculate the deformation behavior of simple structures and different types of loads.
The students can be to apply mathematical knowledge to predict the properties and characteristics
of a fluid.
Can critically analyse the performance of pumps and turbines
UNIT I 10
GEOMETRICAL PROPERTIES OF SECTIONS
Centroid, Centroidal axis Moments of inertia Polar moment of inertia Principal moments of inertia
Graphical treatment Center of Gravity of solids by integration. Combined stresses- Principle stresses
and planes- Graphical treatment- Stresses in thin cylinders and shells.
UNIT II 10
UNIT III 10
TORSION OF CIRCULAR SHAFTS
Theory of Torsion Torsion of circular and hollow circular shaft and Shear due to torsion closed
open coiled helical springs - Strain Energy due to axial force, bending moment flexural and torsional
shear- Resilience stresses due to impact and suddenly applied loads.
UNIT IV 10
PROPERTIES OF FLUIDS
Properties of fluids types of fluid flow Eulers and Bernoullis equation, limitations, pressure and
flow measuring devices- manometers Orifice meter venturi meter and Pitot tube. Reciprocating
and centrifugal pumps- principles and operation work done- efficiency- characteristics- specific
speed- selection of pumps.
UNIT V 10
CLASSIFICATION OF TURBINES
Hydraulic turbines Classification - Working principles of Pelton wheel, Francis and Kalpan turbines-
Work done Efficiency Velocity triangles- Specific speed- Characteristics curves- Selection off turbines.
L = 40 T=10 TOTAL = 50
TEXT BOOKS:
1.Jain op and jain B.K Theory and Analysis of Structure, Nem chand & Brothers
publishers, 1957.
2.Kazimi, Solid Mechanics, Mc Graw hill Inc. US, 2nd Revised edition,1st Jan 1982.
3.S.Ramamrutham & R.Narayan, Strength of Materials, 15th edition 2004, Dhanpat Rai
Publishers, New Delhi.
4.Dr.R.K.Bansal, Fluid mechanics and machinery, Laxmi Publication pvt. Ltd, Bangalore,
2010.
REFERENCE BOOKS:
1.James M. Gere & Stephen, P.Timoshenko, Mechanics of Materials, CBS Publishers and
Distributors, Delhi.
2.Gere and Timoshenko, Mechanics of Materials, 4th edition, A Math CAD Based e book.
3.Egor P Popov, Introduction to Mechanics of solids, Englewood clitts, New Jersey ,
Prentice-Hall,1968.
III SEMESTER
SA3T3 - SANSKRIT AND INDIAN CULTURE III
OBJECTIVES:
The course provides an understanding about the elements of ancient Indian Science. The objective
of the course is to make students to get an idea about the Amazing Verses in Sanskrit and Ancient
Scientific thoughts of India.
OUTCOMES:
UNIT - I (Gt) 10
1. Introduction to Jnayoga
2. Introduction to Bhaktiyoga
3. Introduction to Karmayoga
UNIT - II (Upaniadic principles ) 10
1. Introduction to akaras Phillosophy
2. Introduction to Rmnujas Phillosophy
3. Introduction to Mdhvas Phillosophy
UNIT III 10
1. Amazing creations in Sanskrit (Varnacitras, Sthnacitras and Svaracitras, Gaticitras,
Citrabandanas)
2. Intercity verses in Sanskrit, some intercity discoveries, Sanskrit and artificial intelligence
beauty and charm of Sanskrit Poetry.
3. Stotrakvyas and its relevance
UNIT IV 10
1. Introduction to Maths
2. Introduction to Physics and Chemistry
3. Introduction to Environmental science
UNIT V 10
1. Introduction to Yoga
2. Introduction to Botany & Zoology
3. Introduction to Agriculture
L = 40 T=10 TOTAL = 50
REFERENCE BOOKS:
III SEMESTER
OBJECTIVES :
OUTCOMES:
4. Create a class Mat A and Mat B to and store the result in Mat C to perform m x n matrix
operations.
7. Develop a C++ program to compute the employee details using inheritance concept.
8. Write a C++ program to generate Fibonacci series using constructor and copy constructor.
10. Write a C++ program to perform exception handling using try catch block.
III SEMESTER
EE3P7 ELECTRON DEVICES LAB
OBJECTIVES:
OUTCOMES:
III SEMESTER
OBJECTIVES:
OUTCOMES:
On Completion of the course the student will be able to conduct experiment on Internal
Combustion Engines to study the characteristic and performance of Internal Combustion Engines.
Able to conduct experiment on Compressors and Blowers.
Able to have hands on experience in flow measurements using different devices.
Able to perform calculation related to losses in pipes.
Able to conduct experiment on Pumps and Turbines
IV SEMESTER
.
To help the student in analysis of real to complex numbers and apply them whenever the problem
arises in real analysis and calculus. To understand analytic functions and their interesting
properties.
To know conformal mappings with a few standard examples that has direct application.
To understand the Laplace Transform and its existence and applying Laplace transform to solve
differential equations.
To understand the concept of interpolation and integration using numerical methods.
To acquaint the student with Fourier transform techniques used in wide variety of situations in
which the functions used are not periodic.
To make the student appreciate the purpose of using transforms to create a new domain in which
it is easier to handle the problem that is being investigated.
OUTCOMES:
To facilitate the understanding of the principles and to cultivate the art of formulatingphysical
problems in the language of Mathematics. To introduce the effective mathematical tools needed
for solving engineering problems and to emphasize the underlying mathematical principles in
specific situations.
UNIT I 10
NUMERICAL SOLUTION OF ORDINARY DIFFERENTIAL EQUATIONS
Picards method Taylor series method - Eulers method Modified Eulers method Runges method
Runge-Kutta method Predictor-corrector methods: Milnes method, Adams Bashforth method Outline
of applications of numerical solutions of ordinary differential equations in engineering.
UNIT II 10
FOURIER SERIES
Eulers Formulae (Without Proof) Condition for Fourier expansion Functions having points of
discontinuity Change of interval Expansions of even and odd functions - Half-Range series Parsevals
formula (without proof) Root mean square value (without proof) Typical waveforms (Definition Only):
Square wave form, Saw toothed waveform, Modified saw toothed waveform, Triangular waveform, Half
wave rectifier, Full wave rectifier - Outline of applications of Fourier series in engineering
UNIT III 10
PARTIAL DIFFERENTIAL EQUATIONS
Formation of partial differential equations Solution of a partial differential equation Equations
solvable by direct integration Linear equations of first order Non linear equations of the first order
Charpits method - Homogeneous linear equations with constant coefficients Rules for finding
complementary functions Rules for finding particular integral Solution of homogeneous linear
equation of any order.
UNIT IV 10
NUMERICAL SOLUTION OF PARTIAL DIFFERENTIAL EQUATIONS
Classification of second order equations Finite difference approximation to derivatives Elliptic
equations: Laplace Equation, Poissons equation Solution of Laplaces equation Solution of Poissons
equation Parabolic equations: Heat equation Solution of heat equation Hyperbolic equations: Wave
equation Solution of wave equation Outline of applications of numerical solution of partial differential
equations in engineering.
UNIT V 10
APPLICATIONS OF PARTIAL DIFFERENTIAL EQUATIONS
Method of separation of variables Vibration of a stretched string: Wave equation Solution of Wave
equation - DAlemberts solution of wave equation One dimensional heat flow Solution of heat
equation Two dimensional heat flow Solution of Laplace equation: temperature distribution in long
plates, Temperature distribution in finite plates.
Note: Questions are to be set on problem solving and not on the theoretical aspects.
L = 40 T = 10 TOTAL = 50
1. Grewal B.S, Higher Engineering Mathematics, 43rd Edition, Khanna Publishers, New Delhi, 2014.
REFERENCE BOOKS:
IV SEMESTER
OBJECTIVES:
To understand the generation of D.C. voltages by using different types of generators and Study
their performance.
To study the working principles of D.C. motors and their load characteristics, starting and Methods
of speed control.
To familiarize with the constructional details of different type of transformers, working principle
and their performance.
To estimate the various losses taking place in D.C.machines and transformers and to study the
different testing method to arrive at their performance
OUTCOMES:
After the study the students will understand
The concepts of electromechanical energy conversions in D.C. machines and energy transfer in
transformers and also to analyze their performance.
UNIT I 10
D.C MACHINE CONSTRUCTION
Field System-Armature Core-Commutator and Brushes-Armature winding- E.M.F equation-Methods
of Excitation- Armature Reaction-Commutation-Load Characteristics of D.C generators- Series, shunt
and compound machines -Parallel operation of D.C Generators.
UNIT II 10
D.C MOTORS
Principle- Back EMF- Torque-Load characteristics of series, shunt and compound motors- Three point,
Four point & Automatic starter for D.C Motors-Speed Control of D.C Motors. Losses-Efficiency of D.C
motors & Generators -Brake test, Swinburnes test, Hopkinsons test, Field test for Series Machines
UNIT III 10
TRANSFORMERS
Principle-EMF equation and Transformation ratio- Types of transformers- Construction- phasor
diagram at different load Equivalent circuit-voltage regulation-losses and efficiency- All day efficiency.
UNIT IV 10
TRANSFORMERS TESTING & PARALLEL OPERATION
Polarity and ratio test - O.C and S.C test - Load test - Parallel operation - Three phase
Transformer connections- Open delta-Leblanc connection- Three phase to single phase conversion - Tap
changing
UNIT V 10
SPECIAL TYPE OF TRANSFORMERS
Auto Transformers - current & potential transformers - Earthing - Transformer- Welding
Transformer- Distribution Transformer -Power Transformer-Construction & Operating principle.
L = 40 T = 10 TOTAL = 50
TEXT BOOKS:
1. B.L.Theraja & A.K.Theraja, Electrical Technology, Vol-II, S.Chand Company Ltd, New Delhi, 2007.
2. R.K Rajput, Electrical Machines, 4th Edition, Laxmi publications, 2002.
REFERENCE BOOKS:
2. Dr.Murgesh Kumar, D.C Machines and Transformer, Vikas Publishers, 1998.
IV SEMESTER
UNIT I 10
POWER SUPPLIES
Single phase half wave and full wave rectifiers- Bridge rectifiers, Ripple factor, Rectification efficiency,
transformer utilization factor and regulation - Performance characteristics of rectifiers with
filters- Controlled rectifiers-Regulated power supply-Series and shunt type voltage regulators-
overload and short circuit protection.
UNIT II 10
VOLTAGE AMPLIFIERS
Selection of Q point-DC and AC load lines-input and output impedance, voltage gain, current gain
and power gain calculations for BJT and FET amplifiers in different configurations-Effect of bypass,
coupling and stray capacitances on frequency response- Multi stage amplifiers-RC coupling and
transformer coupling-Overall gain and band width Darlington.
UNIT-III 10
POWER AND DIFFERENTIAL AMPLIFIERS
Class A direct coupled and transformer coupled power amplifiers-Expression for maximum power-
Conversion efficiency with class A and class B operation-Push pull connections-Complimentary symmetry
configuration- distortion Differential amplifier-common and differential mode analysis.
UNIT IV 10
FEEDBACK AMPLIFIER AND OSCILLATORS
Feedback concept- Positive and negative. Series and shunt, voltage and current feedback-Influence
of feedback on input and output impedance, gains stability. Bandwidth and distortion of
amplifier - Barkhausen's criterion for sustained oscillation-RC phase shift and Wein bridge
oscillators-Hartley and Colpitis oscillators-crystal oscillators.
UNIT V 10
TUNED AMPLIFIERS AND MULIVIBRATORS
Characteristics of tuned amplifiers- Single tuned, double tuned and stagger tuned amplifiers-Bandwidth
for single stage and multi stage amplifiers, Influence of Q of tank circuit-Astable, Monostable and
Bistable multivibrators-Schmitt trigger.
L = 40 T = 10 TOTAL = 50
TEXT BOOK:
1. G.K.Mithal, Electronics Devices and Circuits, Khanna Publishers, New Delhi, 1994.
REFERENCE BOOKS:
1. Y.N.Bapat, Electronic circuit and systems, TATA McGraw Hill Education, 1992.
2. Milman and Taub I Pulse, digital and switching wave forms, McGraw Hill
International Editions, 1987.
IV SEMESTER
EE4T5 - ELECTRICAL ENGINEERING MATERIALS
OBJECTIVES:
To acquire basic understanding of advanced materials, their functions and properties for
technological applications
To emphasize the significance of materials selection in the design process
To understand the principal classes of bio-materials and their functionalities in modern medical
science.
To get familiarize with the new concepts of Nano Science and Technology
To educate the students in the basics of instrumentation, measurement, data acquisition,
interpretation and analysis
OUTCOMES:
understanding the choice and manipulation of materials for desired engineering applications. The
course introduces several advanced concepts and topics in the rapidly evolving field of material
science.
Students are expected to develop comprehension of the subject and to gain scientific applications.
UNIT I 10
INTRODUCTION
Review of structure of atom- conductivity of metals Electrons mobility Energy levels of
a molecule fermi dirac distribution Emission Superconductivity Thermal conductivity of
metals Thermoelectric effects of metals.
UNIT II 10
DIELECTRIC PROPERTIES
Dielectric properties (static fields) polarization Mechanisms of polarization polarisability
Dielectric properties (Alternating fields)-Frequency dependence of polarisability Dielectric losses
dielectric properties of polymeric systems Ferro and piezo electricity.
UNIT III 10
MAGNETIC PROPERTIES OF MATERIALS
Magnetic properties of materials classification dia, para, ferro magnetism magnetic
resonance Measurement of electro magnetic properties.
UNIT IV 10
LIQUIDS AND OPTICS
Conduction in liquids classification electrolysis lonic velocities- chemical cells and concentration
cells corrosion cells corrosion by electric currents optical properties of solids photo
emission electro luminescence panels photo emitters LEDs lasers smart sensor materials-
Material for fabrication of integrated circuits.
UNIT V 10
SPECIAL MATERIALS
Metallic glasses as transformer core material nano phase material shape memory alloys
advanced ceramic materials polymers biomaterials non-linear materials and their applications.
L = 40 T = 10 TOTAL = 50
TEXT BOOK:
1. Arumugam.M, Material science, Anuradha Technical book Publishers, Kumbakonam1997.
REFERENCE BOOKS:
1. Electrical Engineering Materials A.J.Dekker , Prentice Hall,1961.
2. Materials for Electrical Engineering B.M.Tareev, Higher school pub co.
3. An introduction to Electrical Engineering materials C.S .Indulkar. S. Chand & co -1998.
4. Raghavan V. Materials science and Engineering,Prentice Hall of India, New Delhi,1993.
IV SEMESTER
EE4T6 - NETWORK ANALYSIS AND SYNTHESIS
OBJECTIVES:
To analyse the relationship between various two port parameters, ladder and lattice networks.
To analyse the time response and frequency response
To synthesise RL, RC & RLC networks by Foster and Cauer form
To analyse the network solution through graph theory concepts
OUTCOMES:
UNIT II 10
FREQUENCY DOMAIN ANALYSIS
Admittance loci of RLC networks frequency response of RLC networks frequency response from pole
- zero bode plots.
UNIT III 10
NETWORK TOPOLOGY
Network graphs, tree and cut sets tie set and cut set schedules V shift and I shift primitive
impedance and admittance matrices application to network solutions
UNIT IV 10
TWO PORT NETWORKS
Characterization of two port networks in terms of Z,Y,H and T parameters networks equivalents
relations between network parameters Analysis of T, Ladder ,Bridged T and lattice networks
transfer function of terminated two port networks .
UNIT V 10
ELEMENTS OF NETWORK SYNTHESIS
Reliability of one port network Hurwitz polynomials and properties P. R. functions and properties
synthesis of RL, RC and LC one port networks.
L = 40 T = 10 TOTAL = 50
TEXT BOOK:
1. Kuo F.F., Network Analysis and Synthesis, Wiley International Edition, Second Edition, 1966.
REFERENCES BOOKS:
1. Paranjothi, S.R., Electric Circuit Analysis, New age International Publishers,
Second Edition, 2000.
2. Van Valkenburg M.E., Network Analysis, Prentice Hall of India Private Ltd., New
Delhi, Third Edition, 1974.
3. Sudhakar. A., and Shyammohan, Networks Analysis and Synthesis, Tata McGraw Hill
Publishing Co. Ltd., New Delhi, 1994.
IV SEMESTER
MEASUREMENTS AND INSTRUMENTATION
(Common to EIE/ECE/EEE/ MECHATRONICS)
OBJECTIVES:
The course should enable the students to:
Acquire the knowledge on basic measurement concepts
Acquire the knowledge on basic electronic measurements
Acquire the knowledge on recording devices
Acquire the knowledge on digital instruments
OUTCOMES:
At the end of the course the student should be able to:
Understand Measurement systems, Bridge measurements
Know the principles of cathode ray oscilloscopes and other measuring instruments
Compare analog and digital techniques, and measurement errors
UNIT-I 10
SCIENCE OF MEASUREMENT AND CHARACTERISTICS OF TRANSDUCERS
Functional elements of an instrument - Units and standards - calibration methods errors in measurement -
statistical methods - Static characteristics - accuracy, precision, sensitivity, linearity, Reproducibility,
Repeatability and Noise - Dynamic characteristics impulse, step, ramp and sinusoidal inputs.
Classification of transducers Selection of Transducer Applications of Transducer - Resistive Transducer:
Strain gauges, Resistance Thermometers, Thermistor - Inductive Transducers: LVDT, RVDT- Capacitive
Transducers Piezoelectric Transducer.
UNIT-II 10
POTENTIOMETERS AND ELECTRICAL INSTRUMENTS
DC potentiometer - Loading effect Application Basic circuit - standardization Laboratory type (Cromptons)
AC potentiometer Drysdale (polar type) type Gall-Tinsley (coordinate) type Limitations & applications
Instrument Transformer - C.T and V.T construction, theory, operation, phasor diagram, characteristics, testing,
error elimination Applications Single and three Phase Wattmeters and Energy meter.
UNIT-III 10
MEASUREMENT OF RESISTANCE AND IMPEDANCE
Low Resistance: Kelvins double bridge Ductor Ohmmeter - Medium Resistance: Voltmeter Ammeter method,
Substitution method, Wheatstone bridge method High Resistance: Megger, Direct deflection method,
Megohm bridge method - Earth resistance measurement. Introduction to A.C. bridges Sources and Detectors
in A.C. bridges Measurement of Inductance Anderson Bridge. - Measurement of Capacitance: Scherings
bridge, De-Sautys bridge - Measurement of frequency using Wiens bridge- LCR meter- Q meter
UNIT- IV 10
CRO AND RECORDING INSTRUMENTS
Oscilloscope: CRO CRT, Deflection System, Specifications, Controls, Phosphors -Dual Beam / Dual trace
oscilloscope - Storage Oscilloscope, Digital Storage Oscilloscope and Sampling Oscilloscope.
Recording Instruments: Method of Recording Frequency Modulated (FM) recording-Pulse Duration
Modulation (PDM) Recording - Strip Chart Recorders, X-Y, UV Recorders, and Plotters.
UNIT-V 10
ANALOG & DIGITAL INSTRUMENTS
Operating Forces Deflecting Force, Controlling Force, Damping Force - Galvanometer, PMMC & moving iron
instruments Principle of operation, construction and sources of errors and compensation Dynamo meter
True RMS meter - electronic voltmeter Digital Voltmeter Multimeter vector voltmeter.
L = 40 T = 10 TOTAL = 50
TEXT BOOKS:
1. D. Patranabis, Sensors and Transducers, Prentice Hall of India, 1999
2. Helfrick & Cooper, Modern Electronic Instrumentation and Measurement Techniques, Prentice Hall of
India,5th Edition,2002.
3. Joseph J Carr, Elements of Electronic Instrumentation & Measurement, Pearson, 3rd Edition 1995.
4. H.S.Kalsi, Electronic Instrumentation, TMH Co., 1995.
5. Moorthy, D.V.S., Transducers and Instrumentation, Prentice Hall of India Pvt. Ltd., 1995.
6. A.K Sawhney, A course in Electrical & Electronic Measurement and Instrumentation, Dhanpat Rai and Co
(P) Ltd., 2004.
7. Oliver and Cage, Electronics measurements & Instrumentation, TMH Co.
8. M.M.S.Anand,Electronic instruments and instrumentation thcnology,PHI, 2006.
REFERENCE BOOKS:
1. E.A. Doeblin, Measurement Systems Applications and Design, Tata McGraw Hill, New York, 1990
2. A.K. Sawhney, A course in Electrical & Electronic Measurement and Instrumentation, Dhanpat Rai and
Co (P) Ltd., 2004..
3. S. Ranganathan, Transducer Engineering, Allied Publishers Pvt. Ltd., 2003.
4. Stout M.B., Basic Electrical Measurement, Prentice Hall of India, 1986.
5. Dalley,J.W., Riley, W.F. and Meconnel, K.G., Instrumentation for Engineering Measurement, John Wiley
& Sons, 1993.
IV SEMESTER
OBJECTIVES:
OUTCOMES:
This course deals with the elements of Indian Cultural Heritage, Science and Technology. Various
aspects right from the important manuscripts that includes Literary Heritage of India, Early
Indian Education and Human responsibilities are dealt briefly to impart the basic knowledge to
all the student-teachers to foster the spirit of belongingness and patriotic fervor.
UNIT I 10
Introduction to Sindh Vedic Cultures; significance & how it is different from the other cultures. (2) Why
we have to follow? Important features. (3) Chronology of Indian Cultures; origin & spread; general
feaures.
UNIT II 10
Literary Heritage of India significance of Indian Literature; (5 & 6) chronology of Indian literature; (7)
Literature in Sanskrit and other languages;
UNIT III 10
Early Indian Education significance & advantages. (9) Gurukulas and Guru-sishya parampara. Learning
methods. (10) Evolution of script and languages; important early scripts and writing materials; (11)
important early educational centers (ghattikas, universities) & their unique features.
UNIT IV 10
Duties & responsibilities of human - gruhya sutras, smrities & sruties - significance in day to day life.
UNIT V 10
L = 40 T = 10 TOTAL = 50
EFERENCE BOOKS
1. Joshi,K. 1992(rp). The Veda and Indian Culture. Rastriya Veda Vidya Pratishthana.
New Delhi.
2. Majumdar, R.C. 1994 (rp). Ancient India. Motilal Banarsidas Publishers. Delhi.
3. Patel, I.S. (ed). 1984. Science and the Vedas. Bombay.
4. Sri Chandrasekarendra Sarasvati Swamihi. 1991. The Guru Tradition. Bharatiya Vidya
IV SEMESTER
OBJECTIVES:
OUTCOMES:
1. Calibration of Wattmeter.
10.Usage of CT and PT for the measurement of High current and High voltage.
IV SEMESTER
OBJECTIVES :
To expose the students to the operation of D.C. machines and transformers and give them
experimental skill.
OUTCOMES:
After the laboratory, the students understand the basic operation of electrical dc machines and
transformer and help them to develop experimental skills.
IV SEMESTER
V SEMESTER
This course provides an introduction to probabilistic models and methods for addressing
uncertainty and variability in engineering applications with the aim of learning how to construct
probability distributions and to calculate probabilities, expected values, and other statistics that
are needed for practical problems.
OUTCOMES:
Topics include fundamental concepts in probability theory (sample spaces, events, counting
principles), conditional probability, independence, probability distributions, discrete and
continuous random variables, probability density and cumulative distribution, functions of random
variables, and random processes.
Also it includes testing the hypothesis, ANOVA (one way, two way, three way), design of
experiments.
UNIT I 10
RANDOM VARIABLES
Discrete random variable Probability mass functions of Binomial, Poisson, Pascal and Geometric
distributions - Continuous random variable Probability density function of Uniform, Normal, Gamma,
Cumulative distribution function Two dimensional random variables Probability mass function Joint
probability density function Cumulative distribution function Marginal probability distribution
Conditional probability distribution Independent random vectors Outline of applications of random
variables in engineering.
UNIT II 10
STATISTICAL AVERAGES
Measures of central tendency Mathematical expectation and moments Measures of dispersion
Coefficient of variation Skewness Kurtosis Pearsons shape coefficients Expected values of a two
dimensional random variables Linear correlation Correlation coefficient Rank correlation coefficient
Regression Equation of the regression line Outline of applications of statistical averages in
engineering.
UNIT III 10
SPECIAL PROBABILITY DISTRIBUTIONS
Special discrete distributions - Binomial distribution Poisson distribution Geometric distribution
Hyper geometric distribution Special continuous distributions Uniform distribution Exponential
distribution Erlang distribution Weibull distribution Normal distribution Outline of applications of
special probability distributions in engineering.
UNIT IV 10
RANDOM PROCESSES
Classification of random processes Methods of description of a random process Special classes of
random processes Average values of random processes Analytical representation of a random
processes Autocorrelation function and its properties Cross correlation function and its properties -
Outline of applications of random processes in engineering.
UNIT V 10
DESIGN OF EXPERIMENTS
Parameters and statistics Sampling distribution Tests of hypothesis and tests of significance Critical
region and level of significance Errors in testing of hypothesis One tailed and two tailed tests
Procedure for testing of hypothesis Design of experiments Completely randomized design: Analysis of
variance for one factor of classification Randomized block design: Analysis of variance for two factors of
classification Latin square design: Analysis of variance for three factors of classification Outline of
applications of design of experiments in engineering.
Note: Questions are to be set on problem solving and not on the theoretical aspects.
L = 40 T = 10 TOTAL = 50
TEXT BOOK:
1. Veerarajan. T., Probability, Statistics and Random Processes, Third Edition, Tata McGraw-Hill
Publishers, New Delhi 2008.
REFERENCE BOOKS:
1. Gubner, John, Probability and random process for electrical and computer engineers,
Cambridge,2006
2. Gupta S.P, Statistical methods, Sultan Chand & Sons,2012
3. Papoulis, Probability, Random Variables and Stochastic Processes, McGraw Hill, 2002
V SEMESTER
OBJECTIVES:
To study characteristics; realize circuits; design for signal analysis using Op-amp ICs
To study internal block and the applications of special ICs like timing circuits, regulator circuits,
ADCs
OUTCOMES:
UNIT I 10
FABRICATION OF INTEGRATED CIRCUITS
IC classification, fundamental of monolithic IC technology, epitaxial growth, masking and etching,
diffusion of impurities. Realization of monolithic ICs and packaging. Fabrication of diodes, capacitance,
resistance and FETs.
UNIT II 10
OP-AMP FUNDAMENTALS, CHARACTERISTICS AND APPLICATIONS
Basic information, Op-amp configurations, Ideal op-amp circuit analysis-DC and AC characteristics of
ideal op-amp-Inverting and Non-inverting amplifiers- summing amplifier- difference amplifier-
voltage follower- Differentiator- Integrator- clamper-clipper-sample and hold circuit, Log amplifier
and Antilog amplifier, Multiplier and Divider.
UNIT III 10
COMPARATORS AND WAVEFORM GENERATORS
Introduction - Basic comparator application, Sine wave generator - Wein bridge oscillator and Phase
Shift oscillator, Square Wave generator, Triangular wave generator, Saw tooth wave generators,
Schmitt trigger.
UNIT IV 10
FILTERS AND CONVERTERS
RC active filters- Low pass , High pass, Band pass, Band reject and Notch filter Digital to analog
converters- basic concepts, analog switches, types-weighted, R-2R ladder DAC. Analog to Digital
converter- basic concepts, types- Flash, successive approximation and dual slope.
UNIT V 10
VOLTAGE REGULATORS AND TIMERS
Voltage regulators - Fixed voltage regulators, Adjustable voltage regulators -723 general purpose
voltage regulator
IC555 Timer-Timer functional diagram, monostable and astable operation, Schmitt trigger and their
applications.
L = 40 T = 10 TOTAL = 50
TEXT BOOKS:
1. Salivahanan S, Linear Integrated Circuits,Tata Mgraw Hill, 2008.
2. Roy Choudhury and Shail Jain, Linear Integrated Circuits, 1995.
REFERENCE BOOKS
1. Sergio Franco, Design with Operational Amplifiers and analog and Integrated Circuits,
nd
2 Edition, McGraw-Hill, 1997.
2. Millman th
J. and Halkias, C.C., Integrated Electronics- Analog and Digital Systems, McGraw
Hill, 9 Reprint, 1995.
3. Coughlin R.F. and F.F.Driscall, Operational Amplifiers and Linear Integrated circuits,
Prentice Hall, Year- 1977.
V SEMESTER
OBJECTIVES:
To develop expressions for the computation of transmission line parameters.
To obtain the equivalent circuits for the transmission lines based on distance and operating
Voltage for determining voltage regulation and efficiency. Also to improve the voltage profile of
the transmission system.
To analyses the voltage distribution in insulator strings and cables and methods to improve the
same.
To understand the operation of the different distribution schemes.
OUTCOMES:
Ability to understand and analyze power system generation, transmission line parameter
calculation, performance of transmission line, types of cables and insulators, HVDC transmission.
UNIT I 10
GENERATION AND DISTRIBUTION SYSTEMS
Hydel, thermal, nuclear, tidal, Biogas, Biomass plants - structure of electric power system-
One line diagram - Generation, Transmission and Distribution systems - Comparison of
distribution systems- Radial and ring systems - two wire DC, AC single phase and three phase
systems - Current and voltage calculation distribution with concentrated and distributed loads -
Kelvins for the design of feeders and its limitations.
UNIT II 10
LINE PARAMETERS AND CORONA
Resistance and capacitance of single phase and three phase line - Stranded bundled
conductor configuration - Symmetrical and unsymmetrical spacing- Transposition of line conductor -
Double circuit lines - Application of self and GMD - Skin and proximity effects - Earth
effect on capacitance Interference - Corona characteristics Effect on performance of lines.
UNIT III 10
PERFORMANCE OF OVER HEAD LINES
Equivalent circuits for short, medium (PI and T circuits) and long lines- Efficiency and Regular - Tuned
power lines - Attenuation and surge impedance loading - Power circle diagrams for receiving and
sending ends- Transmission capacity - Steady state power limit - Voltage control of lines- Shunt and
series compensation.
UNIT IV 10
UNDERGROUND CABLES AND INSULATORS
Underground cables - types Construction- Capacitance of cables - Insulation resistance - Dielectric
stresses and grading - Capacitance and intersheath grading - Dielectric loss - Thermal characteristics -
Capacitance of three core cables - Fault location - Short circuit and open circuit in Insulators -
Types and comparison- Voltage distribution in string insulators - String efficiency - Methods of
improving efficiency.
UNIT V 10
MECHANICAL DESIGN AND HVDC TRANSMISSION:
Stress and sag calculations- Effect of wind and ice- Supports at different levels - Stringing chart
condition erection Dampers - HVDC transmission: Comparison of AC and DC systems - Economics
distance for DC - Terminal equipment for DC systems.
L = 40 T = 10 TOTAL = 50
TEXT BOOKS:
1. C.L. Wadhwa, Electrical power systems, Willey Eastern Limited, NewDelhi, 1985.
REFERENCE BOOKS:
1. W.L. Stevenson, Elements of power systems analysis McGraw hill. S.L.Uppal, Electrical
power, khanna publishers, NewDelhi, 1981.
2. Soni, Bhatnagar and Gupta, A course in electrical power Dhanpat Raj & Sons,
NewDelhi, 1976.
V SEMESTER
DIGITAL ELECTRONICS
(Common to EIE/ECE/EEE/ MECHATRONICS)
OBJECTIVES:
The course should enable the students to:
Study various number systems and to simplify the mathematical expressions using Boolean
functions - simple problems.
Study implementation of combinational circuits.
Study the design of various synchronous and asynchronous circuits.
Learn about the various hazards present in the circuit
Expose the students to various memory devices
OUTCOMES:
The students should be able to:
Understand the basic number system and Boolean algebra.
Understand the basics of combinational circuits.
Know about Flip flops and synchronous sequential circuits and their design.
Analyse about various hazards present in the circuit.
UNIT - I 10
NUMBER SYSTEMS AND CODES
Review of Number systems: Binary, Octal and Hexadecimal. Representations of numbers and their
conversions. Binary arithmetic's. Conversion algorithms. Weighted binary codes and Non-weighted binary
codes. Error detecting and error correcting codes. Alphanumeric codes.
UNIT - II 10
BOOLEAN ALGEBRA AND LOGIC FUNCTIONS
Boolean Algebra: Introduction to Boolean algebra - The AND, OR and NOT operations. Laws of Boolean
algebra. Minimization of Boolean expression. Boolean expressions and logic diagrams. Universal building
blocks. Negative logic.
Logic Simplifications: Truth tables and maps. Sum-of-products and product-of-sums. Simplification of logic
functions using Karanaugh map Minimization and Quine-McCluskey method of minimization.
UNIT - III 10
COMBINATIONAL CIRCUITS
Arithmetic circuits: Half Adder, Full Adder, Half Subtractor and Full Subtractor, Number complements.
Multiplexer - Demultiplexer, Decoder and Encoder code converters BCD to Excess3, Gray, Seven Segment
Display Conversions Parity Generator and Checkers.
UNIT - IV 10
SEQUENTIAL CIRCUITS
Synchronous sequential circuits: Basic latch circuits - Flip-flops, truth table and excitation table. Shift
Registers. Synchronous counter design using JK, T, D flip flops, Up-down counter, General BCD counter and
Ring counters.
Asynchronous Sequential Circuits State Reduction, Multiple Inputs.
UNIT - V 10
LOGIC FAMILIES AND PROGRAMMABLE LOGIC DEVICES
Logic Families: BJT as a switch- Logic Specifications RTL, DTL, IIL, TTL open Collector O/P, Totem pole O/P,
Tristate O/P, Schottky TTL gate, ECL, MOS, CMOS Logic Comparison of Logic Families.
Programmable Logic Devices: PAL, PLA, PROM.
L = 40 T = 10 TOTAL = 50
TEXT BOOKS:
1. W.H. Gothmann: Digital Electronics - An Introduction, Theory and Practice, PrenticeHall of
India.Second
edition,1992.
2. M.Morris Mano Digital Logic & Computer Design PHI, 2nd Edition, 1999.
REFERENCE BOOKS:
1. A. Anand Kumar: Switching Theory and Logic Design PHI, 2008.
2. Heiser Man: Handbook of Digital IC applications, Prentice Hall.1980.
3. D.J. Comer: Digital Logic and State Machine Design, HOLT-SAUN-DERS, 3rd Edition, 1995.
4. T.L. Floyd: Digital Fundamentals, Prentice Hall of India.3rd Edition,1995.
V SEMESTER
CONTROL SYSTEMS
(Common to EIE/ECE/EEE/ MECHATRONICS)
OBJECTIVES:
The course should enable the students to:
Analyze representation of systems and to derive transfer function models.
Provide adequate knowledge in the time response of systems and steady state error analysis.
Give basic knowledge in obtaining the open loop and closed-loop frequency responses of systems.
Provide the concept of stability of control system and methods of stability analysis.
Study the three ways of designing compensation for a control system.
OUTCOMES:
The students should be able to:
Describe various input/output models of dynamic system.
Be familiar with frequency domain descriptions and dynamic analysis.
Understand the concept of stability and effect of feedback control on sensitivity.
Apply the basic methods of classical control system design such as root locus and phase lead-lag
compensation based on Bode plots.
Understand the principles of control theory.
UNIT - I 10
SYSTEM AND THEIR REPRESENTATION
Basic elements of control systems- open and close loop systems Differential equation - Transfer function
Modeling of Electrical systems, translational and rotational mechanical systems Block diagram
reduction techniques Signal flow graphs.
UNIT - II 10
TIME RESPONSE
Time response Time domain specifications types of input I and II order system response Error
coefficients Generalized error series Steady state error Effect of P,PI,PD and PID modes of feedback
control ,Analysis using MATLAB.
UNIT - III 10
FREQUENCY RESPONSE
Frequency response Bode plot Polar plot Nyquist plot Frequency domain specifications from plots
Constant M and N circles Nichols chart Analysis using MATLAB.
UNIT -IV 10
STABILITY AND COMPENSATOR DESIGN
Characteristic equation BIBO stability - Routh Hurwitz criterion - Root locus technique Construction of
Root locus - Nyquist stability criterion Effect of Lag, Lead and lag-lead compensation on frequency
response, Analysis using MATLAB.
UNIT - V 10
STATE VARIABLE ANALYSIS
Concept of state variables State models for linear and time invariant systems solution of state and
output equation in controllable canonical form concept of controllability and observability Effect of
state feedback.
L = 40 T = 10 TOTAL = 50
TEXT BOOKS:
1. M.Gopal,Control system Principle and Design, Tata McGraw Hill, second edition, 2002.
2. K.Ogata,Modern control Engineering, fifth edition, PHI, 2012.
REFERENCE BOOKS:
1. Benjamin C.Kuo, Automatic control systems, seventh edition ,PHI,2010z
.J.Nagrath & Gopal ,Control System Engineering, fifth edition,New Age International .
V SEMESTER
UNIT II 10
SYNCHRONOUS MOTORS
Principle -Starting-Speed-torque curves -phasor diagrams - V & inverted V curves- phase
modifiers - Hunting in synchronous machines and its prevention applications.
UNIT III 10
THREE PHASE INDUCTION MACHINES
Construction - types - principle of operation - equivalent circuit - torque and power output - testing -
circle diagram - cogging and crawling - starting and speed control double cage rotor induction
generator.
UNIT IV 10
SINGLE PHASE INDUCTION MACHINE
Single phase induction motor - double revolving field theory - equivalent circuit - performance
analysis - load characteristics - starting methods
UNIT V 10
FRACTIONAL HORSE POWER MOTORS
Shaded - pole induction motor - variable reluctance motor - stepper motor - AC series motor -
repulsion motor - linear motor - permanent magnet DC and AC motors.
L = 40 T = 10 TOTAL = 50
TEXT BOOK:
1. B.L.Theraja & A.K.Theraja, Electrical Technology,Vol-II, S.Chand Company Ltd, New Delhi,
2007.
REFERENCE BOOKS:
1. Fitzgerald, A.E.Charles Kingsley Jr.Stephen D.Umans, Electric Machinery, McGraw-Hill
Book Company, 1992.
2. Syed A.Nassar, Electric Machines and Power System, Vol - I, McGraw -Hill Inc., New
York, 1995.
3. Dr. Murgesh Kumar, Induction and synchronous machines, vikas publications, New Delhi.
V SEMESTER
OBJECTIVES:
Samskaras or Sacraments
Four AshramaDharmas .
Significance of social gatherings & celebrations of different occasions.
Significance of sound science Gandharvaveda (Music) & Dance.
Significance of Yoga in daily life.
Indian Scientific heritage
OUTCOMES:
This course deals with the elements of Indian Cultural Heritage, Science and Technology. Various aspects
right from the important manuscripts that includes Upaveda with special reference to Yoga, Ashrama
Dharma, Significance of social gatherings etc., Indian music &dance forms both classical and folkare dealt
briefly to impart the basic knowledge to all the student-teachers to foster the spirit of belongingness and
patriotic fervor.
UNIT I 10
Samskaras or Sacraments Important occasions & significance; Sixteen important Samskaras in due course
of human life.
UNIT II 10
Responsibilities of Human - four Ashrama Dharmas .
UNIT III 10
significance of social gatherings & celebrations of different occasions. Worship personal and public
rituals & their significance; (2) soi-cultural significance of festivals and impact on culture. (1) Significance of
sound science Gandharvaveda (Music) & Dance.
UNIT IV 10
Significance of Yoga in daily life.
UNIT V 10
Scientific heritage - importance and significance of Upavedas. (3) Special reference to Ayurveda and
Arthasastra.
REFERENCE BOOKS:
1. Acharya, D. 1999. Dharnuveda (sub-Veda of Yajurveda). Hindi. Vijaya Kumar Govindram
Harsanand. Delhi.
2. Kangle, R.P. 1992 (rp). The Kautilya Arthasastra. Delhi.
3. Rao, S.K.R. 1994. Nityarchana. Agama-kosha (Agam Encyclopaedia). Kalpatharu Research Academy
Publications. Vol X. Bangalore.
4. Ray, P. (tr). 1997. Vasistha's Dhanurveda Samhita. J.J. Publishing House. Delhi.
5. Shalini, K. 1997. Vedic Leguminous Plants (Medical and Microbiological Study). Classical Publishing
Company. New Delhi.
6. Swami Satyananda Saraswati. 1997 (rp). Asanas Pranayama Mudra Bandha. Bihar Yoga Bharati.
Bihar
V SEMESTER
OBJECTIVES:
To expose the students to the operation of synchronous machines and induction motors and give
them experimental skill.
OUTCOMES:
After the laboratory learning the students understand the basic operation of induction and
synchronous machines and help them to develop experimental skills.
V SEMESTER
EE5P8 - CONTROL SYSTEMS LAB
OBJECTIVES:
OUTCOMES :
Ability to understand and apply basic science, circuit theory, Electro-magnetic field theory , control theory
and apply them to electrical engineering problems.
OUTCOMES:
VI SEMESTER
EE6T1 POWER ELECTRONICS
OBJECTIVES:
To get an overview of different types of power semi conductor devices and their switching
characteristics.
To understand the operation, characteristics and performance parameters of controlled rectifier.
To study the operation, switching techniques and basic topologies of DC-DC switching regulators,
AC voltage controller and matrix and simple application
To learn different modulation techniques of PWM inverters & to understand the harmonic
reduction methods.
OUTCOMES:
UNIT I 10
POWER SEMICONDUCTOR DEVICES
Basic structure and switching characteristics of Power Diode, Power Transistor, Power MOSFET, IGBT and
GTO.SCR-Basic Operation-VI characteristics-Turn-on, Turn-off methods-Switching characteristics -
Combination of SCRs - Snubber circuits - Ratings and Protection circuits.
UNIT II 10
AC-DC CONVERTORS
Principles of Phase control - Natural commutation - Operation of 1 H.W.R with R, RL, RL+FWD, RLE Loads -
1 F.W.R with R, RL load, RL+FWD for bridge type converters. Operation of 3 H.W.R & F.W.R. with R,
RL - Effect of Source inductance on 1 and 3 F.W.R - Operation of Dual converters.
UNIT III 10
DC-DC Convertors
Voltage, Current and Load commutation - Principles of chopper - Control strategies - T.R.C, C.L.C - Step-
up, Step-down, Step-up-down choppers - Classification and operation of Choppers (A,B,C,D,E). AC
Chopper - Principle of on - off control and phase control - Operation of 1 AC Voltage controller with R-
Load, RL-Load - Operation of 3 AC Voltage controller with R-Load.
UNIT IV 10
DC-AC Convertors
Classification of Inverters - Basic Series Inverter - Basic Parallel Inverter - VSI Operation - single phase Half
Bridge and Full Bridge - three phase 180o & 120o conduction modes. CSI Operation of single phase CSI with ideal
switches voltage control techniques in single phase inverters.
UNIT V 10
AC-AC Convertors
Types of control (phase & Integrated cycle control), Operation of single phase voltage regulator with R, RL
loads. Operation of three phase AC voltage controls (with Anti parallel SCR configuration) with R load
operation. Cyclo converters: single phase - step up & step down cyclo converters, three phase cyclo
converter with R, RL loads.
L = 40 T = 10 TOTAL = 50
TEXT BOOKS:
1. Mohammad H.Rashid, Power Electronics, Circuits, Devices & Applications, PHI, New Delhi 2003
Edition.
2. Theory of Power Electronics, K.L.Rao, C.H.SaiBabu - S.Chand & Company Ltd., New Delhi.
REFERENCES:
1. M.D.Singh, K.B.Kanchandhani,Power Electronics, TMH, New Delhi.
2. N.Mohan, T.M.Undeland, W.P.Robbins, Power Electronics, Converters and Applications & Design,
3rd Edition John Wiley & sons.
3. Dr.P.S.Bimbhra, Power Electronics, Khanna Publishers, New Delhi.
VI SEMESTER
EE6T2 PROTECTION SWITCHGEAR
OBJECTIVES:
To Study of basic electromagnetic Relays, solid state relays and microprocessor relay
To understand the various protection schemes for generator transformer, bus bar and
transmission line
To understand the method of circuit breaking various arc theories arcing phenomena capacitive
and inductive breaking.
To study various causes of over voltage and various types of lightning arrestors.
OUTCOMES:
After the learning the subject the students understand the various types of relay and various
methods of protection schemes of equipment and also understand the current interruption in
Power System
UNIT I 10
RELAYS
Need for protection - essential qualities of protective relays. Over current relays, directional, distance,
differential, under frequency, negative sequence relays - static relays - microprocessor-based relays.
UNIT II 10
APPARATUS PROTECTION
Apparatus Protection - Generator and Transformer Protection, Protection of bus bars, Transmission
lines, CTs & PTs and their application in protective schemes.
UNIT III 10
THEORY OF ARC QUENCHING
Theory of arcing and arc quenching - RRRV - current chopping and capacitive current breaking -
D.C. circuit breaking.
UNIT IV 10
CIRCUIT BREAKERS
Switchgear fault clearing and interruption of current-various types of circuit breakers-selection
of circuit breakers-intelligent circuit breakers.
UNIT V 10
PROTECTION AGAINST OVERVOLTAGES
Different methods of protection against over voltages - lightning arresters.
L = 40 T = 10 TOTAL = 50
TEXT BOOKS:
1. Ravindranath.B and Chander.N, Power System Protection and Switchgear, Wiley Eastern
Ltd., 1977.
2. Chakrabarti .A, Soni .M.L, Gupta .P.V, A text book on power system Engineering, Dhanpat rai
& Co. pvt. Ltd., 1998.
REFERENCES:
1.Wadhwa C.L., Electrical Power Systems, New Age International Pvt. Ltd., Publishers,
1995.
2.Patra S.P., Basu S.K. and Chowduri S., Power systems Protection, Oxford and IBH
Publishing Co, 1983.
3. Sunil.S.Rao, Protection and Switchgear, Khanna Publishers, New Delhi, 1986.
VI SEMESTER
EE6T3 - ELECTRICAL MACHINE DESIGN
OBJECTIVES:
To study mmf calculation and thermal rating of various types of electrical machines.
To design armature and field systems for D.C. machines.
To design core, yoke, windings and cooling systems of transformers.
To design stator and rotor of synchronous machines and study their thermal behavior.
To design computer aided design transformer and machines using magnet software
OUTCOMES:
Ability to model and analyze electrical apparatus and their application to power system
UNIT I 10
MAGNETIC CIRCUIT CALCULATIONS
Magnetization characteristics - loss curves - estimation of total mmf - mmf for airgap - mmf for teeth -
significance of Carters coefficient - real and apparent flux densities - leakage flux - Leakage reactance
in transformer - leakage reactance in rotating machines - Heating and cooling characteristics.
UNIT II 10
DESIGN OF DC MACHINES
Standard specifications - output equation - output coefficient - choice of specific magnetic and
electric loadings - choice of number of poles - length of airgap - design of armature slot - dimensions
of pole - design of field windings - design of commutator and brushes - design of interpole and its winding.
UNIT III 10
DESIGN OF TRANSFORMERS
Design of transformers - standard specification - EMF per turn - output equation - window space factor
- specific loadings - dimensions of core and yoke - design of winding - cooling tubes - estimation of no
load current of transformer - change of parameters with change of frequency.
UNIT IV 10
DESIGN OF SYNCHRONOUS MACHINES
Standard specifications - output equation - choice of specific loadings - design of salient pole machines
- short circuit ratio - length of air gap - armature design - design of rotor - design of damper winding -
design of turbo alternator design of three phase induction motor - output equation - choice of specific
loadings - main dimensions - design of stator windings and core - length of air gap - design of cage rotor
- design of wound rotor.
UNIT V 10
COMPUTER AIDED DESIGN
Introduction of computer aided design - advantages - methods of approach- Analysis method - synthesis
method optimization - general procedure - variables and constraints - optimal design of power
transformer - optimal design of induction motor - optimal design of synchronous machine.
(Only for Demo) Design of DC Machines, Single phase & Three phase Transformer, Single phase &
Three phase induction motor, Synchronous Machines using MAGNET Software.
L = 40 T = 10 TOTAL = 50
TEXT BOOKS:
1. A course in Electrical Machine Design A.K.Sawhney, Dhanpat rai & co, 1999.
2. Principles of Electrical Machine Design, R.K.Agarwal, S.K.Kataria & sons, 1997.
3. Computer Aided Design of Electrical Equipment, M.Ramamoorthy, Associated East-
West Press, 1987.
REFERENCE BOOKS:
1. The Performance and Design of DC Machines, Clayton & Hancock, oxford and IBH Publishing co,
1988.
2. The Performance and Design of AC Machines, M.G.Say, ELBS, 1974.
3. Electrical Machine Design Data Book, A.Shanmugasundram,G.Gangadhar & R.palani, wiley
Estern Ltd., NewDelhi, 1979.
VI SEMESTER
MICROPROCESSOR AND MICROCONTROLLER
(Common to the branches EEE/ EIE / MECHATRONICS)
OBJECTIVES:
The objective of the course is to impart knowledge on:
1. The Architecture of 8086 & 8051.
2. The addressing modes & instruction set of 8086 & 8051.
3. The need & use of Interrupt structure.
4. Simple program Skills.
5. Commonly used peripheral / interfacing ICs.
OUTCOMES:
After completion of the course the students are expected to be able to:
1. Understand the functional block diagram, Timing Diagram, Interrupt structure and Multiprocessor
configurations of 8086Microprocessor.
2. Develop the Programming skills using Loop structure with counting & Indexing, Look up table,
Subroutine instructions stack.
3. Interface ICs 8255 PPI, 8259 PIC, 8257 DMA, 8251 USART, 8279 Key board display controller and 8253
Timer/ Counter, A/D and D/A converter.
4. Comprehend the Functional block diagram ,Instruction format and addressing modes, Interrupt
structure ,I/O Ports and Serial communication of 8051 Microcontroller.
5. Develop the programming skills in PID control algorithm, square, triangular and sine wave form
generation, closed loop control of servo motor and stepper motor control.
UNIT I 10
INTRODUCTION TO MICROPROCESSOR- 8085
Comparison of microcomputer with "mini" and "large" Computers-Advantages and limitations of
Microprocessor based system design -8085 Microprocessor architecture-Addressing modes- Instruction set-
Programming the 8085- interrupts - Memory and I/O
UNIT II 10
16 BIT MICROPROCESSOR 8086
Intel 8086 microprocessor - Architecture - Instruction Set-Addressing Modes-- Assembly Language
Programming-Procedures- Interrupts
UNIT-III 10
MULTIPROCESSOR CONFIGURATIONS
Coprocessor Configuration Closely Coupled Configuration Loosely Coupled Configuration 8087 Numeric
Data Processor Data Types Architecture 8089 I/O Processor Architecture Communication between CPU
and IOP
UNIT- IV 10
INTERFACING AND SYSTEM DESIGN USING MICRO PROCESSOR
1. 8255-Programmable peripheral Interface along with 8085-Both Mode 0 and Mode 1, detailed study.
2. 8254 - Programmable Interval Timer along with Intel 8086 - Both Mode 0 and Mode 3 to be studied.
3. Need for the following ICs: (a) 8251 - USART; (b) 8257 - Direct Memory Access Controller; (c) 8259-
Programmable Interrupt Controller; (d) 8279 - Keyboard / Display Interface
4. Case studies Traffic light control, washing machine control- Motor Control- Relay, PWM, DC & Stepper
Motor
UNIT - V 10
MICROCONTROLLERS
Architecture of 8051 Microcontroller signals I/O ports memory counters and timers serial data I/O
interrupts- Interfacing -keyboard, LCD,ADC & DAC
L = 40 T = 10 TOTAL = 50
TEXT BOOKS:
1. Ramesh S. Gaonkar ,Microprocessor Architecture, Programming and Applications with the 8085 Penram
International Publisher , 5th Ed.,2006
2. Yn-cheng Liu,Glenn A.Gibson, Microcomputer systems: The 8086 / 8088 Family architecture, Programming
and Design, second edition, Prentice Hall of India , 2006 .
3. LA Levant Hal, Introduction to Microprocessor, Software, Hardware, Programming, PHI, Inc.1978.
4..Kenneth J.Ayala, The 8051 microcontroller Architecture, Programming and applications second edition
,Penram international.
REFERENCE BOOKS :
1. Douglas V.Hall, Microprocessors and Interfacing : Programming and Hardware, second edition , Tata Mc
Graw Hill ,2006.
2. A.K.Ray & K.M Bhurchandi, Advanced Microprocessor and Peripherals Architecture, Programming and
Interfacing, Tata Mc Graw Hill , 2006.
3. Mohamed Ali Mazidi,Janice Gillispie Mazidi, The 8051 microcontroller and embedded systems using
Assembly and C,second edition, Pearson education /Prentice hall of India , 2007.
VI SEMESTER
OUTCOMES:
UNIT I 10
INTRODUCTION
Classification of systems: Continuous, discrete, linear, causal, stable, dynamic, recursive, time variance;
classification of signals: continuous and discrete, energy and power; mathematical representation of
signals; spectral density; sampling techniques, quantization, quantization error, Nyquist rate, aliasing
effect. Digital signal representation.
UNIT II 10
DISCRETE TIME SYSTEM ANALYSIS
Z-transform and its properties, inverse z-transforms; Fourier transform of discrete sequence Discrete
Fourier series. Computation of DFT using FFT algorithm - DIT & DIF - FFT using radix 2 - Butterfly structure.
UNIT III 10
DESIGN OF DIGITAL FILTERS
FIR & IIR filter realization - Direct I ,Direct II Parallel & cascade forms- IIR design: Analog filter design -
Butterworth and Chebyshev approximations; digital design using impulse invariant and bilinear
transformation.
UNIT IV 10
DIGITAL SIGNAL PROCESSORS
Introduction - Architecture ofTMS320F24XXEvent Manager-General purpose Timer-Serial
Communication interface- Serial Peripheral Interface - CAN- Features pipeline- Instruction set.
UNII V 10
DSP APPLICATIONS TO MOTOR CONTROL
PWM generation using LF24XX Procedure; DSP control of BUCK-BOOST converter- Block diagram; DSP
Control of BLDC Motor - Block diagram; SVPWM generation using LF24XX - Procedure
L = 40 T = 10 TOTAL = 50
TEXT BOOKS:
1. S.K.Mitra, Digital Signal Processing A computer Based Approach, Tata Mc Graw Hill Edition, 1998.
REFERENCES BOOKS:
1. Lonnie C. Lumen, Fundamentals of Digital Signal Processing, John WHily and sons, 1987.
2. J.G. Prookis and D.G. Manolakis, Indtroduction to Digital Signal Processing, Macmillan Publishing
Company, 1989.
3. R.G.Lyons, Understanding Digital Signal Processing, Addison Wesley, 1997.
VI SEMESTER
EC6T9 - COMMUNICATION ENGINEERING
OBJECTIVES:
To introduce different methods of analog communication and their significance
To introduce Digital Communication methods for high bit rate transmission
To introduce the concepts of source and line coding techniques for enhancing rating of
transmission of minimizing the errors in transmission.
To introduce MAC used in communication systems for enhancing the number of users.
To introduce various media for digital communication
OUTCOMES
Basic theories behind the various communication systems are studied.
Features of the various communication systems are studied.
UNIT I 10
RADIO COMMUNICATION SYSTEMS
Frequency spectrum - principle of AM and FM - AM and FM transmitters and receivers - introduction
to micro wave communication systems - principle of satellite communication.
UNIT II 10
PULSE COMMUNICATION SYSTEMS
PAM, PPM, PDM, PCM - delta modulation - differential PCM - merits and demerits - comparison of
pulse modulation schemes.
UNIT III 10
DATA TRANSMISSION
Base band Signal receiver -error probability - optimum and m a t c h e d filter techniques - coherent
reception - digital modulation systems - FS, PSK - comparison of data transmission systems.
UNIT IV 10
TRANSMISSION MEDIUM
Characteristics of cables - optical fibers - effects of EM radiation - band width and noise
restrictions statistical measurement of random noise - concept of multiplexing FDM and TDM.
UNIT V 10
TELEVISION
Scanning methods - B/W and colour systems - camera and picture tubes - synchronization -
transmitters and receivers.
L = 40 T = 10 TOTAL = 50
TEXT BOOKS:
REFERENCE BOOKS:
1. Simon Haykins, Communication Systems, 3rd Edition, John Wiley, Inc., 1995.
2. Bruce Carlson. A, Communication Systems, 3 rd Edition, Tata McGraw-Hill, 1986.
3. Roody and Coolen, Electronic Communication, 4 th Edition Prentice Hall of & India,1999.
OBJECTIVES:
OUTCOMES:
This course deals with the elements of Indian Cultural Heritage, Science and Technology. Various
aspects right from the important manuscripts that includes Vedic Mathematics, Astrology,
Astronomy, Jyotisam, etc., monument and temples of India are dealt briefly to impart the basic
knowledge to all the student-teachers to foster the spirit of belongingness and patriotic fervor.
UNIT I 10
Social significance of religion - evolution of religious thoughts and ritual practices; (1) different
philosophical Schools.
UNIT II 10
structural evolution for ritual practices; significance of temples & other constructions. (2) Civil engineering
skill & construction technologies; scientific aspects in Vastusastra
UNIT III 10
Important personalities and their Contribution Devarishies, Maharishies, Rishies, Seers and contribution
of their institutions to protect the cultural heritage.
UNIT IV 10
Vedic Mathematics, Astrology & Astronomy, etc. early Indian works and its importance in day to day life.
UNIT V 10
project work - ancient Indian technological thoughts with modern applications in different fields.
L = 40 T = 10 TOTAL = 50
REFERENCE BOOKS:
1. Datta, B. & A.N. Singh. 1962(rp). History of Hindu Mathematics. 2 Vols. Asian Publishing House.
Bombay.
2. Jagadguru Swami Sri Bharati Krishna Tirthaji Maharaj. 1994 Vedic Mathematics. Motilal
Banarasidas. New Delhi.
3. Kulkarni, R.P. 1983. Geometry according to Sulba Sutra. Samsodhana Mandal. Pune.
4. Radhakrishna, S. 1993(rp). Indian Philosophy. Vol I & II. Oxford University Press. Delhi.
5. Rao, J. 1960. Principles and Practices of Medical Astrology. Raman Publications. Banglore.
VI SEMESTER
EE6P7 - POWER ELECTRONICS LAB
OBJECTIVES:
To provide hands on experience with power electronic converter circuit design and testing.
OUTCOMES:
OBJECTIVES
OUTCOMES
To understand and apply computing platform and software for engineering problems
VI SEMESTER
OUTCOMES:
MODEL BASED DESIGN AND VERIFICATION USING SIMULINK AND REALIZATION WITH 2407.
1. Model based design to do Arithmetic functions using simulink model and realized with c2407 kit.
2. Model based design to access Input port using simulink and realized with c2407 kit.
3. Model based design to access ADC module for given input signal using simulink and realized with
c2407 kit.
4. Model based design to access pulse width modulator for generate fixed pwm using simulink and
realized with c2407 kit.
VII SEMESTER
EE7T1 COMPUTER AIDED POWER SYSTEM ANALYSIS
OBJECTIVES:
To design a network modeling for bus admittance and impedance with equivalent circuits.
To design a power flow of Gauss, Seidel &Newtons, Rapson methods for slack& p-v bus losses.
To design a stability analysis for equal area criterion, swing equation & multi machine power
system
OUTCOMES:
Ability to model and analyze electrical apparatus and their application to power system.
UNIT I 10
INTRODUCTION
Need for system analysis in planning and operation of power system distinction between
steady state and transient state per phase analysis of symmetrical three- phase system.
General aspects relating to power flow, short circuit and stability analysis - per unit representation.
UNIT II 10
NETWORK MODELLING
Primitive network and its matrices - bus incidence matrix - bus admittance and bus impedance
matrix formation. Equivalent circuit of transformer with off-nominal-tap ratio. Modelling of generator,
load, shunt capacitor, transmission line, shunt reactor for short circuit, power flow and stability studies.
UNIT III 10
SHORT CIRCUIT ANALYSIS
Need for short circuit study - Approximations in modeling - calculation for radial networks.
Symmetrical short circuit analysis - symmetrical component transformation - Sequence impedances -
Zbus in phase frame and in sequence frame fault matrices - unsymmetrical fault analysis.
UNIT IV 10
POWER FLOW ANALYSIS
Problem definition - bus classification - derivation of power flow equation - solution by Gauss - Seidel
and Newton - Raphson methods - P-V bus adjustments for both methods - computation of slack bus
power, transmission loss and line flow.
UNIT V 10
STABILITY ANALYSIS
Steady state and Transient stability-Stability limits-Swing equation for single machine infinite bus
system- Equal area criterion-Solution of swing equation by modified Euler and Runge-Kutta
methods-Stability analysis of multi machine power system
L = 40 T = 10 TOTAL = 50
TEXT BOOKS:
1. J ohn J. Grainger and Stevenson Jr. W.D., Power System Analysis, McGraw Hill
International, edition, 1994.
2. Nagarat .I.J, Kothari .D.P, Power system Engineering, TMH Pub. Co. Ltd., 1994.
3. I.J.Nagrath & D.P.Kothari Modern power system analysis by Tata Mc Graw - Hill publishing
company Ltd, 2nd edition.
4. Electrical Power Systems, C.L.Wadhwa, New Age International, 3rd edition.
REFERENCE BOOKS:
1. Stagg G.W. and El-Abaid A. H., Computer Methods in Power System Analysis, McGraw-
Hill International Book Company.
2. Nagarath I.J. and Kothari D.P., Modern Power System Analysis, Tata McGraw Hill
PublishingCompany, 1990.
VII SEMESTER
EE7T2 - UTILIZATION AND CONSERVATION OF ELECTRICAL ENERGY
OBJECTIVES :
To have basic knowledge about Electrolytic process and Energy storage devices.
To understand the need for energy conservation and various methods adopted for energy
conservation.
OUTCOMES:
Ability to understand and analyze concept of illumination, heating, welding, electric traction.
Ability to handle the engineering aspects of electrical energy conservation and utilization.
UNIT I 10
ILLUMINATION
Production of light- Lighting calculations-Determination of MHCP and MSCP-Polar curves of different
types of sources-Rousseau's construction-Photometer-interior and exterior illumination systems-
Lighting schemes-Design of lighting schemes-Factory lighting-Flood lighting.; electric lamps-Gaseous
discharge lamps-High pressure and low pressure neon lamp- High frequency, low pressure discharge tubes.
UNIT II 10
ELECTRIC FURNACES AND WELDING
Resistance, Induction and Arc furnaces-Constructions and fields of application-Control equipment-
Efficiency and losses-High frequency dielectric heating resistance-Welding equipment- Mechanical,
Thyratron, current and energy actuated control devices- Characteristics of carbon and metallic arc
welding-Butt welding -Spot welding Electro chemical Process.
UNIT III 10
ELECTRIC TRACTION
Traction system- series, parallel control of D.C motors, open circuited, shunt and bridge transition
Effort calculations- electric braking control wire- tramways and buses A.C traction recent trend In
electric traction
UNIT IV 10
ELECTROLYTIC PROCESSES AND STORAGE OF ELECTRICITY
Electrolysis-Polarization Factor-Preparation of work in electroplating- Tanks and other equipments-
Calculations of energy Requirements-Method of charging and maintenance-Nickel-iron and
Nickel- Cadmium batteries-Components and materials- Chemical reactions-Capacity rating of batteries-
Battery chargers
UNIT V 10
CONSERVATION OF ENERGY
Energy efficient light sources- Energy efficient Ballast Energy saving lighting Techniques- conservation in
transformer by using heat exchangers, transcalars Systems conservation in electric drives- Energy
Auditing in an industry a case study.
TEXT BOOKS:
1. Uppal S.L, Electric Power System, Khanna Publishers, 1988.
2. Openshaw Taylor, Utilization of Electrical Energy, Oriented Longmans Limited (Revised in
SI units) 1971.
REFERENCE BOOKS:
1. Soni Bhatnagar & Gupta, A Course in Electric Power, Dhanpat Rai & Sons, 9th Edition
1995.
2. Fonder, Electricity Principles and Applications, Tata McGraw Hill, 1998.
3. G.G.Rajan, Optimising Energy Efficiencies in Industry,
4. Albert Thumann.P.E, Plant Engineers and managers guide to Energy conservation Van
Nostrand Rainhold Company, New York.
VII SEMESTER
EE7T3 - PLC and SCADA
OBJECTIVES:
To study about PLC.
To study about programming of PLC.
To gives an introducing knowledge about SCADA.
To study about application of PLC and SCADA.
OUTCOMES:
Ability to understand the PLC architecture.
Ability to understand the programming of PLC.
Ability to understand the SCADA.
Ability to analyse the application to various industries.
UNIT I 10
PLC HARDWARE& CONFIGURATION:
Analog input modules, ,Analog output module , Digital input module , Counter or accumulator digital
inputs module , Digital output module, Mixed analog and digital modules , Communication interfaces,
Power supply module ,Processor module, Logical sensors-logical actuators- PLC operation
UNIT II 10
INTRODUCTION TO LOGIC:
Conventional ladder vs. LPLC ladder, series and parallel functions of OR,AND,NOT,XOR logics, analysis of
rungs, the basic relay instruction, NO, NC, output latching instruction, interface programs
UNIT III 10
TIMER& COUNTER INSTRUCTION PLC:
On delay, OFF delay, retentive timer instruction, PLC counter Up and Down instructions, combining
counter and timers, simple application program using timer and counters , FBD concepts and programming
UNIT IV 10
SCADA SYSTEMS, HARDWARE AND SOFTWARE:
Introduction and brief history of SCADA Fundamental principles of modern SCADA systems SCADA
hardware SCADA software Modem use in SCADA systems- DCS concepts as LAN of PLCs, Comparison of
the terms SCADA, DCS, PLC and smart instrument SCADA system benefits of SCADA system Remote
terminal units , PLCs used as RTUs The SCADA software package , Redundancy , System response time,
Expandability of the system Specialized SCADA protocols Error detection Distributed network
protocol New technologies in SCADA systems
UNIT V 10
CASE STUDIES:
PLC application, process description, process automation (machine or equivalent), DCS application, process
description, process automation design ( Power plant or equivalent), NCS/SCADA with process description
and process automation design ( Railway traction power supply or equivalent)
L = 40 T = 10 TOTAL = 50
TEXT BOOKS:
1. Introduction to Programmable Logic Controllers by Garry Dunning, Thomson,2nd edition,Thomson,
ISBN: 981-240-625-5
2. Computer control of Process by M. Chidambaram, Narosha Publishing
REFERENCE BOOKS:
1. Computer based Industrial Control by Krishna Kant, PHI ,2004
2. Programmable Logic Controllers, JR Hackworth, Pearson Education,1st Edition,2003
3. Programmable Logic Controllers, W Bolton, Elsevier ,4th Edition, 2006
4. Programmable Logic Controllers with Applications, PK Srivstava, BPB Publications.
VII SEMESTER
To understand the basic concepts of different types of electrical machines and their performance.
To study the different methods of starting and controlling speed of D.C motors and induction
motors using electric drives.
To study the conventional and solid state drives.
OUTCOMES:
Upon completion of this subject the students can be able to explain different types of electrical
machines and their performance using electric drives.
UNIT I 10
CHARACTERISTICS OF ELECTRIC DRIVES
Requirements of a Variable speed drive -Types of Drives - Comparison of AC and DC drives -
Mechanical characteristics - Rating and selection of Motors.
UNIT II 10
DC DRIVES
Speed control of dc motors - Ward- Leonard scheme - drawbacks - thyristor converter fed dc drives: 1
and 3 half and fully controlled DC drives. Chopper fed Dc Drives: Advantages over rectifier drives -
Principle of operation - Time ratio control and current limit control - four quadrant operations - Closed loop
control
UNIT III 10
INDUCTION MOTOR DRIVES
Speed control of three phase induction motors - stator control - stator voltage and frequency control - Ac
chopper, inverter and Cycloconverter fed induction motor drives, rotor control - rotor resistance control
and slip power recovery schemes - static control of rotor resistance using dc chopper - static Kramer and
Scherbius drives.
UNIT IV 10
SYNCHRONOUS MOTOR DRIVES
Speed control of three phase synchronous motors - voltage source and current source inverter fed
synchronous motors commutatorless dc motors - Cycloconverter fed synchronous motors - effects of
harmonics on the performance of ac motors - closed loop control of drive motors.
UNIT V 10
DIGITAL CONTROL AND DRIVE APPLICATIONS
Digital techniques in speed control - advantages and limitations - microprocessor based control of drives
- selection of drives and control schemes for steel rolling mills, paper mills, lifts and cranes.
L = 40 T = 10 TOTAL = 50
TEXT BOOKS:
1. Pillai S.K., A First Course on Electrical Drives, New Age International Publishers, 2nd
Edition, 1994.
2. Vedam Subrahmanyam, Thyristor Control of Electric Drives, Tata McGraw Hill
Publishing company Ltd., New Delhi, 1994.
REFERENCE BOOKS:
1. Sen P.C, Thyristor - DC Drives, John Wiley & Sons, New York, 1981.
2. Bose B.K, Power Electronics and AC Drives, Prentice Hall, Englewood cliffs, New Jersey, 1986
3. Ramamoorthy M., An Introduction to Thyristor and their Application, Affiliated East West
Press (P) Ltd, 2nd Edition , 1991.
VII SEMESTER
- POWER SYSTEM SIMULATION LAB
OBJECTIVES
To acquire software development skills and experience in the usage of standard packages
necessary for analysis and simulation of power system required for its planning, operation and
control.
Acquire skills of using Mi power software for power system studies.
Acquire skills of using computer packages MATLAB coding and SIMULINK in power system studies.
OUTCOMES:
Ability to understand and analyze power system operation, stability, control and protection.
VII SEMESTER
EE7P8 - ELECTRICAL EQUIPMENT TESTING LAB
OBJECTIVES:
To enable the students to understand the behavior of various Relays & electrical machines.
OUTCOMES:
VII SEMESTER
EE7P9 - ELECTRIC DRIVES LABORATORY
OBJECTIVES:
To enable the students to understand the behavior of various electrical machines drives control
based simulation using PSIM.
OUTCOMES:
Ability to understand & analyze various electrical machines drives using PSIM.
VIII SEMESTER
EE8T1 - POWER PLANT ENGINEERING
OBJECTIVES:
Providing an overview of power plants and developing the role of mechanical and electrical
engineering in their operation and maintenance.
OUTCOMES:
Upon completion of their course the students can able to understand different types of power
plants and its functions and their flow lines of issues related to them.
Analyse and solve energy and economic related issues in power section.
UNIT I 10
THERMAL POWER PLANTS
Basic thermodynamic cycles, various components of steam power plant-layout pulverized c o a l burners-
Fluidized bed combustion-coal handling systems-ash handling systems- Forced draft and induced draft
fans- Boilers- feed pumps-super heater- regenerator-condenser- dearearators-cooling tower.
UNIT II 10
HYDRO ELECTRIC POWER PLANTS
Layout-dams-selection of water turbines-types-pumped storage hydel plants.
UNIT III 10
NUCLEAR POWER PLANTS
Principles of nuclear energy- Fission reactions- nuclear reactor-nuclear power plants.
UNIT IV 10
GAS AND DIESEL POWER PLANTS
Types, open and closed cycle gas turbine, work output & thermal efficiency, methods to improve
performance-reheating, intercoolings, regeneration-advantage and d i sa d va n t a g e s - Diesel engine
power plant-component and layout
UNIT V 10
NON-CONVENTIONAL POWER GENERATION
Solar energy collectors, OTEC, wind power plants, tidal power plants and geothermal resources, fuel
cell, MHD power generation-principle, thermoelectric power generation, thermionic power generation.
L = 40 T = 10 TOTAL = 50
TEXT BOOKS:
1. Arora and Domkundwar, A Course in Power Plant Engineering, Co.Pvt.Ltd., New Delhi.
2. P.K. Nag, Power Plant Engineering, Tata McGraw Hill, Second Edition.
REFERENCE BOOKS:
1. Bernhardt G.A.Skrot , Power station Engineering and Economy, Vopat - Tata McGraw Hill
Publishing Company Ltd., New Delhi, 20.
2. G.D. Rai-Khanna , An introduction to power plant technology, M.M. El-Wakil McGraw Hill 1984.
VIII SEMESTER
EE8T2 - POWER SYSTEM OPERATION AND CONTROL
OBJECTIVES:
To model reactive power-voltage interaction and the control actions to be implemented for
maintaining the voltage profile against varying system load
To teach about SCADA and its application for real time operation and control of power system
OUTCOMES:
Ability to understand and analysis power system operation, stability, control and protection.
UNIT I 10
INTRODUCTION
Methods adopted in utilities for providing reliable, good quality and economic electric power supply
- system load variation. Practical operating problems - Load dispatching - system load characteristics,
load curves, load duration curves. Energy curves load factor, diversity factor, Coincidence factor, demand
factor reserve requirements, Installed reserves, spinning reserves, cold reserves, hot reserves -
operation restrictions, types of outages.
UNIT II 10
LOAD FORECASTING AND UNIT COMMITMENT
Classification and characteristics of loads - classification of base load and its estimation, weather
sensitive load model - short term load-forecasting procedure. Constraints on unit commitment solution
methods - priority List method and dynamic programming method.
UNIT III 10
SYSTEM CONTROL REAL POWER FREQUENCY CONTROL
MW - frequency interaction - load-frequency mechanism - load frequency control - QV control -
interaction between Pf and QV channels - Basic control loops Fundamentals of speed governing -
Transfer function model - speed governing system - Turbo generator - Static response - Feedback control -
static and dynamic response of ALFC - secondary ALFC loop AGC in isolated power systems - AGC in
interconnected power systems - Two area system - modeling of tie line - representation of two area
system - static and dynamic response - tie line bias control - Frequency bias tie line control - Basis for
selection of bias.
UNIT IV 10
SYSTEM CONTROL REACTIVE POWER VOLTAGE CONTROL
Reactive power and voltage control - Production and absorption of reactive power - Methods of voltage
control - Shunt reactors, Shunt capacitors, Series capacitors, synchronous condensers - Static VAR
Systems - Types of SVC - Application of Static VAR compensators, Power factor improvement, OLTC- Tap
changing control, Excitation systems- types & requirements - Elements of an excitation system - Types of
excitation systems - DC, AC, Static and recent developments and future trends -Modeling of exciter,
generator - static performance - dynamic performance- AVR root loci.
UNIT V 10
COMPUTER CONTROL OF POWER SYSTEMS
Energy control centre: Functions - Monitoring, data acquisition and control. System hardware
configuration - SCADA and EMS functions: Network topology determination, state estimation,
security analysis and control. Various operating states: Normal, alert, emergency, in-extremis and
restorative.
L = 40 T = 10 TOTAL = 50
TEXT BOOKS:
1. Mahalanbias A.K., Kothari D.P. and Ahson S.I., Computer Aided Power system Analysis
and Control, Tata McGraw Hill, Publishing Company, New Delhi, 1990.
REFERENCE BOOKS:
1. Prabha Kundur, Power System stability and control, EPRI Series - McGraw Hill Inc., 1994
2. O.I.Elgerd, Electrical Energy System Theory, Tata McGraw Hill Publication, 1983 Edition.
VIII SEMESTER
PRINCIPLES OF MANAGEMENT AND PROFESSIONAL ETHICS
(Common to EIE/ECE/EEE/ MECHATRONICS)
OBJECTIVES:
The course should enable the students to:
Knowledge on the principles of management is essential for all kinds of people in all kinds
of organizations.
Have a clear understanding of the managerial functions like planning, organizing, staffing, leading
and controlling.
To understand global business and diversity.
Students will also gain some basic knowledge on international aspect of management.
To understand the concepts of computer ethics in work environment.
OUTCOMES:
At the end of the course the student should be able to:
Helps to examine situations and to internalize the need for applying ethics principles, values to
tackle with various situations.
Develop a responsible attitude towards the use of computer as well as the technology.
Able to envision the societal impact on the products / projects they develop in their career.
Understanding the code of ethics and standards of computer professionals.
Analyze the professional responsibility and empowering access to information in the work place.
UNIT - I 10
INTRODUCTION TO MANAGEMENT
UNIT II 10
PLANNING FUNCTION
Elements of Planning-Objectives, Action, Resource, Implementation. Managerial Decision Making: Types of
Decision, Process of Decision Making, Decision Making-Certainty Condition, Uncertainity Condition,
Selecting Alternative.Managing Information System; Need for Decision Support System, MIS and DSS
Strategic Planning Organizational Strategy, Business Portfolio Matrix.
UNIT III 10
ORGANIZING FUNCTION
Organizational Structure- Job Design, Departmentation, Span of Control, Delegation of
Authority,Decentralized authority, Chain of Command and Authority, Line and Staff concept Matrix
organizational Design
UNIT IV 10
ENGINEERING ETHICS
Senses of engineering ethics variety of moral issues types of inquiry moral dilemmas moral
autonomy kohlbergs theory Gilligans theory consensus and controversy professions and
professionalism professional ideas and virtues theories about right action self-interest customs and
religion uses of ethical theories
UNIT V 10
ENGINEERS RESPONSIBILITY FOR SAFETY
Safety and risk Assessment of safety and risk Risk benefit analysis Reducing risk The three mile
Island and chernobyl case studies
L = 40 T = 10 TOTAL = 50
TEXT BOOKS
1. Mike Martin & Roland schinzinger Ethics in engineering Mc Graw Hill 2009.
2. Govindarajan M, Natarajan. S.Senthil kumar V.S, Engineering Ethics, Prentice Hall of India,2004
REFERENCE BOOKS
1. Charles D.Fleddermamm, Engineering Ethics, Pearson Hall(2004)
2. Charles E.Haris, Michael S.Protchard & Michael J.Rabins, Engineering Ethics- concepts and cases,
Wadsworth Thompson Learning
3. Jhon R.Boartright, Ethics and conduct of Business, Pearson Education(2003)
4. Edmund G.See Bauer & Robert L.Bany, Fundamental of Ethics for Scientists and Engineering, Oxford
University
OBECTIVES:
To understand the various types of overview in power system and protection system
Generation of over voltage in laboratories and measurement of overview.
Nature of breakdown in solid, liquid and gaseous dielectrics.
Testing of power equipments of insulation co-ordination.
OUTCOMES:
Ability to understand and analyse H.V. equipment working and their importance in power system
operation in control and protection.
UNIT I 10
OVERVOLATGES AND INSULATION COORDINATION
Natural causes of over voltages - lightning phenomena - over voltages due to switching surges - system
faults and other abnormal conditions - principles of insulation co- ordination. (Text book 1 P226-P286,
Text book 2 P460-P499)
UNIT II 10
ELECTRICAL BREAKDOWN IN GASES, SOLIDS AND LIQUIDS
Classical gas laws - ionization and decay processes - secondary effects - Paschen's law - streamer theory -
breakdown in non-uniform fields and corona discharges practical considerations in using gases for
insulation purposes - vacuum insulation. Conduction and breakdown in pure and commercial liquids.
Intrinsic breakdown in solids - electromechanical breakdown - thermal breakdown - breakdown in
composite dielectrics. (Text book 1 P1-P90, Text book 2 P281-P394)
UNIT III 10
GENERATION OF HIGH VOLTAGES AND HIGH CURRENTS
Generation of high DC voltage, alternating voltage, impulse voltages and impulse currents. (Text book 1
P104-P155, Text book 2 P8-P75)
UNIT IV 10
MEASUREMENT OF HIGH VOLTAGE AND HIGH CURRENTS
Measurement of high voltages and high currents - digital techniques in high voltage measurement.
(Text book 1 P157-P224, Text book 2 P77-P107, P175-P195)
UNIT V 10
HIGH VOLTAGE TESTING
High voltage testing of electrical power apparatus - power frequency, impulse voltage and DC,
International and Indian Standards.
(Text book 1 P322-P348)
L = 40 T = 10 TOTAL = 50
TEXT BOOKS:
nd
1. M.S. Naidu and V.Kamaraju, High Voltage Engineering,Tata McGraw Hill, 2 Edition,
1995.
2. Kuffel E and Zaengl w.s, High Voltage Engineering Fundamentals, Pargamon Press,
Oxford, London, 1986.
REFERENCE BOOKS
1. Kuffel E and Abdullah M, High Voltage Engineering, Pergamon Press, Oxford, 1970.
2. Gallghar, P.J. and Pearmain, A.J., High Voltage Measurement, Testing and Design, john
willey and sons, new York, 1982.
OBJECTIVES:
To introduce the power quality problem
To educate on production of voltages sags, over voltages and harmonics and methods of control.
To study overvoltage problems
To study the sources and effect of harmonics in power system
To impart knowledge on various methods of power quality monitoring.
OUTCOMES:
Ability to understand and analyze power quality problem, stability, control and protection.
UNIT I 10
INTRODUCTION
Definitions - Power quality, Voltage quality - Power quality issues : Short duration voltage variations,
Long duration voltage variations, Transients, Waveform distortion, Voltage imbalance, Voltage
fluctuation, Power frequency variations - Sources and Effects of power quality problems - Power
quality terms - Power quality and Electro Magnetic Compatibility (EMC) , IEEE and IEC Standards.
UNIT II 10
SHORT AND LONG INTERRUPTIONS
SHORT INTERRUPTIONS: Introduction - Origin of short interruptions: Voltage magnitude events due
to re- closing, Voltage during the interruption - Monitoring of short interruptions - Influence on induction
motors, Synchronous motors, Adjustable speed drives, Electronic equipments - Single phase tripping:
Voltage during fault and post fault period, Current during fault period - Prediction of short Interruptions.
LONG INTERRUPTIONS: Definition - Failure, Outage, Interruption - Origin of interruptions - Causes of
long interruptions - Principles of regulating the voltage - Voltage regulating devices, Applications: Utility
side, End-User side - Reliability evaluation - Cost of interruptions.
UNIT III 10
VOLTAGE SAG AND TRANSIENTS
VOLTAGE SAG: Introduction - Definition - Magnitude, Duration - Causes of Voltage Sag - Load influence
on voltage sags on Adjustable speed drives, Power electronics loads, Sensitive loads -
Stochastic assessment of voltage sags - Overview of mitigation methods.
TRANSIENTS: Definition - power system transient model - Principles of over voltage protection - Types
and causes of transients - Devices for over voltage protection - Capacitor switching transients -
Lightning transients - Transients from load switching.
UNIT IV 10
WAVEFORM DISTORTION
Introduction - Definition and terms - Harmonics, Harmonics indices, Inter harmonics, Notching - voltage
Vs Current distortion - Harmonics Vs Transients - Sources and effects of harmonic distortion -
System response characteristics - Principles of controlling harmonics - Standards and limitation
UNIT V 10
POWER QUALITY SOLUTIONS
Introduction - Power quality monitoring : Need for power quality monitoring, Evolution of power quality
monitoring, Deregulation effect on power quality monitoring-Brief introduction to power quality
measurement equipments and power conditioning equipments - Planning, Conducting and Analyzing
power quality survey - Mitigation and control techniques - Active Filters for Harmonic Reduction
L = 40 T = 10 TOTAL = 50
TEXT BOOKS:
1. Roger C. Dugan, Mark F. McGranaghan and H.Wayne Beaty, "Electrical Power Systems
Quality", McGraw-Hill, New York, Edition, 2002.
2. Barry W.Kennedy, Power Quality Primer, McGraw-Hill, New York, 2000.
REFERENCE BOOKS:
1. Sankaran.C, "Power Quality", CRC Press, Washington, D.C., 2002
2. Math 3H.J.Bollen, "Understanding Power Quality Problems: Voltage Sags and
Interruptions",IEEE Press, New York, 2000.
3. Arrillaga.J, Watson.N.R and Chen.S, "Power System Quality Assessment", John Wiley.
OBJECTIVES:
To impart knowledge on Construction, principle of operation and performance of synchronous
reluctance motors.
To impart knowledge on the Construction, principle of operation, control and performance of
stepping motors.
To impart knowledge on the Construction, principle of operation, control and performance of
switched reluctance motors.
To impart knowledge on the Construction, principle of operation, control and performance of
permanent magnet brushless D.C. motors.
To impart knowledge on the Construction, principle of operation and performance of
permanent magnet synchronous motors.
OUTCOMES:
Ability to model and analyze electrical apparatus ( machines) and their application to power
system
UNIT I 10
SYNCHRONOUS RELUCTANCE MOTORS
Constructional features types axial and radial air gap motors operating principle reluctance
phasor diagram - characteristics Vernier motor.
UNIT II 10
STEPPING MOTORS
Constructional features principle of operation variable reluctance motor Hybrid motor single
and Multi stack configurations theory of torque predictions linear and non-linear analysis
characteristics drive circuits.
UNIT III 10
SWITCHED RELUCTANCE MOTORS
Constructional features principle of operation torque prediction power controllers Nonlinear
analysis Microprocessor based control - characteristics computer control.
UNIT IV 10
PERMANENT MAGNET BRUSHLESS D.C. MOTORS
Principle of operation types magnetic circuit analysis EMF and Torque equations Power
Controllers Motor characteristics and control.
UNIT V 10
PERMANENT MAGNET SYNCHRONOUS MOTORS
Principle of operation EMF and torque equations reactance phasor diagram power controllers -
converter - volt-ampere requirements torque speed characteristics - microprocessor based control.
L = 40 T = 10 TOTAL = 50
TEXT BOOKS:
1. Miller, T.J.E., Brushless Permanent Magnet and Reluctance Motor Drives, Clarendon
Press, Oxford, 1989.
2. Aearnley,P.P., Stepping Motors - A Guide to Motor Theory and Practice, Peter
Perengrinus, London, 1982.
REFERENCE BOOKS:
1. Kenjo T., Stepping M o t o r s and t h e i r M i c r o p r o c e s s o r C o n t r o l s , C l a r e n d o n Press
London, 1984.
2. Kenjo T and Nagamori S., Permanent Magnet and Brushless DC Motors, Clarendon
Press, London, 1988.
OBJECTIVES:
To provide fundamental ideas regarding Distribution system Planning.
To teach students regarding sub- station layouts and protection schemes for various Distribution systems.
OUTCOMES:
Methods and procedure to plan a Distribution system in power Engineering.
Methods to calculate compensation levels to be provided for healthy Distribution systems.
UNIT I 10
GENERAL CONCEPTS
Introduction to distribution systems, Load modeling and characteristics. Coincidence factor, contribution
factor loss factor. Relationship between the load factor and loss factor. Classification of loads (Residentia
l, commercial, Agricultural and Industrial) and their characteristics.
UNIT II 10
FEEDERS AND SUBSTATIONS
Design Considerations of Distribution Feeders: Radial and loop types of primary feeders, voltage
levels, feeder loading; basic design practice of the secondary distribution system.
Location of Substations: Rating of distribution substation, service area within primary feeders. Benefits
derived through optimal location of substations.
UNIT III 10
SYSTEM ANALYSIS PROTECTION SCHEMES
Voltage drop and power loss calculations: Derivation for voltage drop and power loss in lines, manual
methods of solution for radial networks, three phase balanced primary lines.
Objectives of distribution system protection, types of common faults and procedure for fault calculations.
Protective Devices: Principle of operation of Fuses, Circuit Reclosures, line sectionalizes, and circuit
breakers Coordination of Protective Devices: General coordination procedure.
UNIT IV 10
COMPENSATION FOR POWER FACTOR IMPROVEMENT
Capacitive compensation for power factor control.Different types of power Capacitors, shunt and
series capacitors, effect of shuntcapacitors (Fixed and switched), Power factor correction, capacitor
allocation. Economic justification. Procedure to determine the best capacitor location.
UNIT V 10
VOLTAGE CONTROL
Voltage Control: Equipment for voltage control, effect of series capacitors, effect of AVBlAVR, line drop
compensation.
L = 40 T = 10 TOTAL = 50
TEXTBOOK:
1."Electric Power Distribution system, Engineering" - by Turan Gonen, McGraw-hill
BookCompany.
REFERENCE BOOKS:
1. Electric Power Distribution - by AS. Pabla, Tata Mc Graw-hill Publishing company, 4"
edition, 1997.
To understand the concepts of Automotive Electronics and its evolution and trends
To study the Electronic fuel injection and ignition systems and digital engine control systems
OUTCOMES :
Obtain an overview of automotive components, subsystems, design cycles and safety systems
employed in todays automotive industry
UNIT I 10
FUNDAMENTAL OF AUTOMOTIVE ELECTRONICS
Current trends in mordern Automoblies, Open loop and closed loop systems - Components for
electronic engine management. Electronic management of chassis system - Vehicle motion control.
UNIT II 10
SENSORS AND ACTUATORS
Introduction, basic sensor arrangement, types of sensors such as - oxygen sensors, Crank angle
position sensors -Fuel metering / vehicle speed sensor and detonation sensor - Altitude sensor,
flow sensor. Throttle position sensors, solenoids, stepper motors, relays.
UNIT III 10
ELECTRONIC FUEL INJECTION AND IGNITION SYSTEMS
Introduction, Feed back carburettor systems (FBC) Throttle body injection and muli port or point
fuel injection,Fuel injection systems, injection system controls. Advantages of electronic ignition
systems. Types of solid stateignition systems and their principle of operation, Contactless electronic
ignition system, Electronic spark timingcontrol.
UNIT IV 10
DIGITAL ENGINE CONTROL SYSTEM
Open loop and closed loop control systems - Engine cranking and warm up control -
Accleration enrichment -Deceleration leaning and idle speed control. Distributorless ignition - Integrated
engine control system, Exhaustemission control engineering.
UNIT V 10
ELECTROMAGNETIC INTERFERENCE SUPPRESSION
Electromangetic compatibility - Electronic dash board instruments - Onboard diagnosis system. security
andwarning system.
L = 40 T = 10 TOTAL = 50
TEXT BOOKS:
1. William B.Riddens, " Understanding Automotive Electronics ", 5th Edition, Butterworth,
Heinemann Woburn, 1998.
2. om Weather Jr and Cland C.Hunter, " Automotive Computers and Control System ". Prentice Hall
Inc., New Jersey.
REFERENCE BOOKS:
1. Young. A.P. and Griffths.L. " Automobile Electrical Equipment ", English Language Book Society
and New Press.
2. Crouse. W.H., " Automobile Electrical equipment ", McGraw Hill Book Co Inc., New York, 1955.
3. Robert N Brady, " Automotive Computers and Digital Instrumentation ". A reston Book.
Prentice Hall, Eagle Wood Cliffs, New Jersey, 1988.
4. Bechtold., " Understanding Automotive Electronic ", SAE, 1998.
5. T.Mellard, " Automotive Electronics ".
OUTCOMES:
Learners will attain basic knowledge of protection of power system.
Learners will be able to understand the various schemes available in static relay
Learners will understand the concepts of steady state and transients behavior of static relays.
UNIT I 10
Philosophy of power system protection and its requirements- Conventional Vs static relays-
Generalized characteristics and operational equations of relays. Steady state and transient
performance of signal deriving elements-Signal mixing techniques and measuring techniques-
CTs and PTs in relaying schemes-Saturation effects-Stabilizing resistors.
UNIT II 10
Static relay circuits using analog and digital ICs for over current, Differential and directional relays.
UNIT III 10
Static relay circuits for generator loss of field, under frequency. Distance. Impedance. Reactance.
Mho and reverse power relays.
UNIT IV 10
Static relay circuits for carrier current protection-steady state and transient behaviour of static
relays testing, maintenance of relays- Tripping circuits Using Thyristors.
UNIT V 10
SYSTEM DESIGN EXAMPLES AND APPLICATIONS:
Temperature controller-LCR meter-Calculator-keyboard interface- Display interface- DC/DAC
interface- Speed control of DC motors-Stepper motor control-Microprocessor based frequency counter.
L = 40 T = 10 TOTAL = 50
TEXT BOOKS:
1. Avatar Sing and Water A Triebel, 16 Bit Microprocessors, Architecture, Software and
Interface techniques, prentice Hall, 1965.
2. Douglas V Hall, Microprocessor and Interfacing TMH Edition 1986.
REFERENCE BOOKS:
1. PEATMAN J B Microcomputer based system design, McGraw Hill '82
OBJECTIVES:
To verify the process concept on the selected process loops.
OUTCOMES:
4. Response of P I D controller
To obtain the adequate knowledge in programming of PLC and design instrument system.
OUTCOMES:
Ability to understand and analyse the application of PLC and instrument systems.
PLC
1. Logic gate operations, Timing operations, counter operations and math operation using PLC.
2. Control of battle filling system and sequential operation of motors using PLC.
DESIGN PROJECT
OUTCOMES:
The student will be able to understand the design of main dimensions and other major part of the
transformer and DC and AC rotating machines.
The student will be capable of evaluating the procedure for the design of main dimensions and
other major part of the transformer and DC and AC rotating machines.
The student will be equipped to apply in-depth knowledge related to the design of electrical
machines.
UNIT I 10
DESIGN AND LAYOUT OF TRANSMISSION LINES
Requirements of transmission Lines - Selection of voltage levels for H.T. transmission lines - Choice
of conductors - spacing of conductors - Types of Insulators - specifications of transmission lines -
Electrical and Mechanical design of transmission lines - Surge Impedance loading - stringing of
transmission lines - Tower designs - Types, single circuit, Double circuit towers - Transmission line Earth
wires IEE rules
UNIT II 10
DESIGN AND LAYOUT OF DISTRIBUTION SYSTEMS
Primary and secondary distribution system design - Calculation of distribution sizes, voltage drops
- voltage regulation - Design scheme for Rural Distribution system - Design scheme for
industrial distribution schemes - Power distribution for computer automation - layout for Town
Electrification - types of distribution cables - Switchgear for L.T. and H.T. Distributions - IEE rules for
Distribution.
UNIT III 10
LAYOUT AND INSTALLATION OF POWER EQUIPMENTS
Installation of power transformers - Reactors - Installation of Insulators - Erection of earthing
systems and secondary circuits - Installation of CT's and PT's and CVT's - Installation of fuses and their
rating - Installation of Isolators and Circuit breakers - Installation of Capacitor banks - IEE rules
UNIT IV 10
LAYOUT AND DESIGN FOR ELECTRIC DEVICE
Low voltage and metal clad and Switchgear for Electric drives - single-phase preventer - Contactors
Types and their definition - Contactor starters for motors - limit switches for process control devices - IEE
rules for Motors Erection.
UNIT V 10
DESIGN AND LAY OUT OF SUBSTATIONS
Types of Substations - Indoor and outdoor substations - Selection of Site and Location - Layout diagram
of 11 kV / 440V, 220 / 11KV substations - Substations requirements, their functions and
location Substation Switchgear installations - Busbar arrangements and design - Load break
switches - Switching substations - Location CT's and PT's - materials for Busbar - Substations earthing.
L = 40 T = 10 TOTAL = 50
TEXT BOOKS:
1. M.V. Deshpande, Electric Power system design, Edition illustrated, Tata Mcgraw hill education , 2001.
2. Suni S Rao, Switchgear Protection & power systems Khanna publishers, `1999.
OBJECTIVE:
To impart knowledge on how to prepare various Electrical components using PSCAD software
solving problems in Electrical engineering and to optimize and verify the design of machine
conductors and Field circuits.
OUTCOME:
With laboratory classes, it helps the students to get familiarized with the PSCAD Software
Model and analyze the magnetic circuit of various components and machines
OUTCOMES:
The student will be able to:
Explain the different meanings of the quality concept and its influence.
Describe, distinguish and use the several techniques and quality management tools.
Explain and distinguish the normalization, homologation and certification activities.
Identify the elements that are part of the quality measuring process in the industry.
Predict the errors in the measuring process, distinguishing its nature and the root causes.
Justify whether or not a measuring process fulfils the established quality requirements.
Explain the regulation and the phases of a quality system certification process.
UNIT I 10
INTRODUCTION
Definition of Quality, Dimensions of Quality, Quality Planning, Quality costs - Analysis Techniques for
Quality Costs, Basic concepts of Total Quality Management, Historical Review, Principles of TQM,
Leadership Concepts, Role of Senior Management, Quality Council, Quality Statements, Strategic
Planning, Deming Philosophy, Barriers to TQM Implementation.
UNIT II 10
TQM PRINCIPLES
Customer satisfaction - Customer Perception of Quality, Customer Complaints, Service Quality, Customer
Retention, Employee Involvement - Motivation, Empowerment, Teams, Recognition and Reward,
Performance Appraisal, Benefits, Continuous Process Improvement - Juran Trilogy, PDSA Cycle, 5S, Kaizen,
Supplier Partnership - Partnering, sourcing, Supplier Selection, Supplier Rating, Relationship Development,
Performance Measures - Basic Concepts, Strategy, Performance Measure.
UNIT III 10
STATISTICAL PROCESS CONTROL (SPC)
The seven tools of quality, Statistical Fundamentals - Measures of central Tendency and Dispersion,
Population and Sample, Normal Curve, Control Charts for variables and attributes, Process capability,
Concept of six sigma, New seven Management tools.
UNIT IV 10
TQM TOOLS
Benchmarking Reasons to Benchmark, Benchmarking Process, Quality Function Deployment (QFD) -
House of Quality, QFD Process, Benefits, Taguchi Quality Loss Function, Total Productive Maintenance
(TPM) - Concept, Improvement Needs, FMEA - Stages of FMEA.
UNIT V 10
QUALITY SYSTEMS
Need for ISO 9000 and Other Quality Systems, ISO 9000:2000 Quality System - Elements,
Implementation of Quality System, Documentation, Quality Auditing, QS 9000, ISO 14000 Concept,
Requirements and Benefits.
L = 40 T = 10 TOTAL = 50
TEXT BOOK:
1. Dale H.Besterfiled, Total Quality Management, Pearson Education Asia, 1999. (Indian reprint
2002).
REFERENCE BOOKS:
th
1. James R.Evans & William M.Lidsay, The Management and Control of Quality, (5 Edn), South-
Western (Thomson Learning), 2002 (ISBN 0-324-06680-5).
2. Feigenbaum.A.V. Total Quality Management, McGraw-Hill, 1991.
3. Oakland.J.S Total Quality Management Butterworth - Hcinemann Ltd., Oxford. 1989.
4. Narayana V. and Sreenivasan N.S., Quality Management - Concepts and Tasks, New Age
International 1996.
5. Zeiri, Total Quality Management for Engineers Wood Head Publishers, 1991
UNIT I 10
INTRODUCTION
Cell structure electrode electrolyte interface, electrode potential, resting and action potential -
electrodes for their measurement, ECG, EEG, EMG machine description - methods of measurement
three equipment failures and trouble shooting.
UNIT II 10
TRANSDUCERS FOR BIO-MEDICAL INSTRUMENTATION
Basic transducer principles source of bioelectric potentials - resistive, inductive, capacitive,
fiber-optic, photoelectric and chemical transducers their description and feature
applicable for biomedical instrumentation.
UNIT III 10
SIGNAL CONDITIONING, RECORDING AND DISPLAY
Input isolation, DC amplifier, power amplifier, and differential amplifier feedback, op Amp-
electrometer amplifier, carrier Amplifier instrument power supply. Oscillagraphic galvanometric X-
Y, magnetic recorder, storage oscilloscopes-electron microscope- PMMC writing systems.
UNIT IV 10
CARDIAC MEASUREMENTS
Electrocardiograph measurements blood pressure measurement: by ultrasonic method-
plethysonography blood flow measurement by electromagnetic flow meter- cardiac output
measurement by dilution method phonocardiography vector cardiography. Heart lung machine
artificial ventilator Anesthetic machine Basic ideas of CT scanner MRT and ultrasonic scanner - bio-
telemetry laser equipment and application cardiac pacemaker - DC - defibrillator patient safety -
electrical shock hazards.
UNIT V 10
COMPUTERS IN BIO-MEDICAL INSTRUMENTATION
Introduction - computers in medicine - basics of signal conversion and digital filtering - data reduction
technique time and frequency domain technique ECG Analysis.
L = 40 T = 10 TOTAL = 50
TEXT BOOKS:
1. Khandpur, R.S., 'Handbook of Biomedical Instrumentation', TMH, 1989.
2. Arumugam M.,Bio Medical Instrumentation, Anuradha agencies Pub., 2002.
REFERENCE BOOKS:
rd
1. Geddes L.A., and Baker, L.E., 'Principles of Applied Bio-medical Instrumentation', 3 Edition, John
Wiley and Sons, 1995.
nd
2. Cromwell, Weibell and Pfeiffer, Biomedical Instrumentation and Measurements', 2 Edition,
Prentice Hall of India, 1999.
3. Tompkins W.J., Biomedical Digital Signal Processing, Prentice Hall of India, 1998.
OUTCOMES:
UNIT I 10
ARM INTRODUCTION
Introduction - The ARM Architecture Overview - Instruction set Summary - Processor operating states-
Memory formats - Memory Interface - Bus interface signals -Addressing signals Addressing timing -
Data Timed Signals - Debug interface - Debug systems - Debug interface signals - ARM7TDMI Core
and system state - About Embedded ICE-RT Logic Instruction Set.
UNIT II 10
LPC2148 ARM CPU
Introduction: - Architectural Overview - Memory Mapping -Block Diagram
System control block functions: PLL - Power Control - Reset - VPB Divider - Wakeup Timer - Memory
Acceleration Module - Timer0 and Timer1- PWM - RTC - On Chip ADC - On Chip DAC- Interrupts- Vector
Interrupt Controller.
UNIT III 10
LPC 2148 PERIPHERALS
General Purpose Input/Output Ports (GPIO) - Universal Asynchronous Receiver/Trasmitter
(UART) - I2 C Interface Multimaster and Multislave communication - SPI Interface - SSP Controller USB
2.0 Device Controller.
UNIT IV 10
OPERATING SYSTEM OVERVIEW
Introduction OS Function of OS Defining an RTOS Differences in Embedded Operating
Systems Introduction to Kernel Resources Shared Resources - Defining a Task Task States -
Multitasking - Scheduling and Scheduling Algorithms - Context Switching Clock Tick Timing of Task.
UNIT V 10
C/OS II
IntroductionII Task Management Functions Creating a Task - Time Management Functions OS
Delay Functions - Implementation of Scheduling and rescheduling.
L = 40 T = 10 TOTAL = 50
REFERENCE BOKS:
OBJECTIVES:
To study about prospectus of CMOS.
To study and analyse of prospectus of MOS technology.
To study about the VLSI circuit design process.
To study about semiconductor design process.
To study about systems designing using MOS technology.
OUTCOMES:
Students will be able to:
Understand thoroughly the principles of hardware design in the latest technology
Gain expertise through hands on experience
Identify areas for the development of electronic hardware design for the benefit of the society
Communicate general as well as technical information in an effective way
Handle technical and non-technical assignments individually or as a team member
UNIT I 10
INTRODUCTION
Introduction to IC Technology - MOS. PMOS. NMOS. CMOS & BICMOS technologies-Oxidation, thography, Diffusion
, implantation,ion metallisation, Encapsulation, Probe testing, Integrated Resistors and Capacitors.
UNIT II 10
UNIT III 10
UNIT IV 10
UNIT V 10
SUBSYSTEM DESIGN
Sub system Design, Shifters, Adder, ALUs, Multipliers, Parity generators, Comparators, Zero/one
Detectors, counters, High Density Memory Elements.
L = 40 T = 10 TOTAL = 50
TEXT BOOKS:
1. Essentials of VLSI Circuits and systems -Kamran Eshraghian, Esharghian Dougles and A.
Pucknell, PHI, 2005 Edition
2. Principles of CMOS VLSI Design weste and Eshraghian, Pearson Education, 1999.
REFERENCE BOOKS:
1. Chip Design for submicron VLSI; CMOS Layout & simulation - john P.Uyemura, Thomson
learning.
2. Introducing to VLSI Circuits and systems John P.Uyemura, Johnwilley, 2003.
3. Digital Integrated circuits john M.Rabaey, PHI, EEE, 1997.
4. Modem VLSI Design. Wayne Wolt. Pearson Education, 3 rd Edition, 1997.
OUTCOMES
UNIT I 10
Introduction and Classical Optimization Techniques: Statement of an Optimization problem design
vector - design constraints - constraint surface - objective function - objective function surfaces
Classification of optimization problems.
UNIT II 10
Classical Optimization Techniques:; Single variable Optimization - multi variable Optimization without
constraints - necessary and sufficient conditions for minimum/maximum - multivariable Optimization with
equality constraints. Solution by method of Lagrange munipliers - multivariable Optimization with
inequality constraints- Kuhn-'- Tucker conditions.
UNIT III 10
Linear Programming:; Standard form of a linear programming problem- geometry of linear programming
problems - definitions and theorems - solution of a system of linear simultaneous equations - pivotal
reduction of a general system of equations - motivation to the simplex method - simplex algorithm.
UNIT IV 10
Transportation Problem:; Finding initial basic feasible solution by north - west comer rule, least cost
method and Vogel's approximation method - testing for optimality of balanced transportation
problems.
UNIT V 10
Unconstrained Nonlinear Programming: One - dimensional minimization methods: Classification,
Fibonacci method and Quadratic interpolation method
L = 40 T = 10 TOTAL = 50
TEXT BOOKS:
1. Engineering optimization and practice" by S. S.Rao,, New Age International (P) limited, 3111,
Edition, 1998.
2. "Introductory Operations Research" by H: Kasene & K: D.Kumar, Springer (India), Pvt. Ltd.
REFERENCE BOOKS:
1. "Optimization methods in Operations Research and systems Analysis" - by K V. Mital and C.
Mohan, New Age Intemational Publishers.3111 edition, 1996:
2. Operations Research - by Dr. S.D, Sharma]
3. "Operations Research: An introduction - by H.A.Taha, PHI Pvt. Ltd., 6111 edition.
4. Linear Programming-by G:Hadley, Wesley Publication, 1963.
OBJECTIVES:
Explain the importance of human resources and their effective management in organizations.
Demonstrate a basic understanding of different tools used in forecasting and planning human
resource needs.
Describe the meanings of terminology and tools used in managing employees effectively.
Record governmental regulations affecting employees and employers.
OUTCOMES:
Analyse the key issues related to administering the human elements such as motivation,
compensation, appraisal, career planning, diversity, ethics and training.
UNIT I 10
UNIT II 10
Definition of the Dual problem primal-dual relationship Economic interpretation of duality Dual
simplex method primal dual computation post optimal or sensitivity analysis Changes affecting
feasibility Changes affecting optimality Revised simplex method LP packages.
UNIT I I I 10
Definition of Transportation model The transportation algorithm Determination of the starting
solution Iterative computations of the Algorithm The Assignment Model The Hungarian method
The Transshipment model Inter programming problem Cutting plane Algorithm.
UNIT IV 10
Scope of Network Applications Network solution Minimal spanning tree Algorithm Shortest Route
problem Examples Shortest Route Algorithm Maximal flow model Minimum cost capacitated flow
problems.
UNIT V 10
Network diagram representation Critical path method Time estimates Crashing Time charts
PERT and CPM for project scheduling Resource planning Case studies.
L = 40 T = 10 TOTAL = 50
TEXT BOOKS:
1. Handy A. Taha, Operation Research An Introduction, 7th Edition, Pearson Education, Asia,
2002.
REFERENCE BOOKS:
1. Ronald. L. Rardin, Optimization in Operation Research, Person Education, Asia,2002.
2. JIT.S Chandran, Mahendran P. Kawatra Ki Ho Kim, Essential of Linear
Programming,Vikas Publishing House Pvt.Ltd., New Delhi, 1994.
3. Hiller F.S Liberman G.J, Introduction to Operation Research, 6 Edition, McGraw Hill,1995.
4. R.Panneer Selvam, Operations Research, Prentice Hall of India, 2002.
5. P.C. Tulsin, Quantitative Technique : Theory and Problem, Pearson Education,nd
2002.
Ravindran, Phillips, Solberg, Operation Research Principles and Practice, 2 Edition, John
wiley, 1987.
OBJECTIVES:
To impart knowledge on basics of virtual instrumentation flow and programming techniques.
To study the concept of tools used for industrial application using MATLAB and LABVIEW
To create virtual instrumentation programming for various industrial applications
OUTCOMES:
At the end of the course, the student should be able to
Know the fundamental principles of virtual instrumentation using MAT LAB & LABVIEW
Understand Real time industrial application programs
1. Time responses of various system compensation, stability and analysis using MATLAB.
2. Simulation of complex control system using MATLAB.
3. Design of filters and resonant circuits using MATLAB.
Using LABVIEW
OBJECTIVES
To learn Hardware Descriptive Language(Verilog/VHDL)
To learn the fundamental principles of VLSI circuit design in digital and analog domain
To familiarize fusing of logical modules on FPGAs
To provide hands on design experience with professional design (EDA) platforms.
OUTCOMES:
At the end of the course, the student should be able to
Write HDL code for basic as well as advanced digital integrated circuits.
Import the logic modules into FPGA Boards.
Synthesize, Place and Route the digital IPs.
Design, Simulate and Extract the layouts of Analog IC Blocks using EDA tools.
LIST OF EXPERIMENTS:
PSPICE:
Response.
MATLAB:
2. Waveform Generation.
OUTCOMES:
Ability to understand and analyze power system operation, stability, control and protection.
UNIT I 10
INTRODUCTION
FACTS-a toolkit, Basic concepts of Static VAR compensator, Resonance damper, Thyristor controlled
series capacitor, Static condenser, Phase angle regulator, and other controllers.
UNIT II 10
SERIES COMPENSATION SCHEMES
Sub-synchronous resonance, Torsional interaction, torsion torque, Compensation of conventional,
ASC, NGH damping schemes, Modeling and control of Thyristor controlled Series compensators.
UNIT III 10
UNIFIED POWER FLOW CONTROL
Introduction, Implementation of power flow control using conventional Thyristor, Unified power
flow concept, Implementation of unified power flow controller.
UNIT IV 10
DESIGN OF FACTS CONTROLLERS
Approximate multi-model decomposition, Variable structures FACTS controllers for Power
system transient stability, Non-linear variable-structure control, variable - structure series capacitor
control and variable-structure resistor control.
UNIT V 10
STATIC- VAR COMPENSATION
Basic concepts, Thyristor controlled reactor (TCR), Thyristor switched reactor (TSR) Thyristor
switched capacitor (TSC), saturated reactor (SR), and fixed capacitor (FC).
L = 40 T = 10 TOTAL = 50
TEXT BOOKS:
OUTCOMES:
Ability to understand and analyze power system operation, stability, control and protection
UNIT I 10
GENERAL ASPECTS
Historical development HV AC and DC links-Kinds of DC links - HVDC Projects in India and
abroad- Advantages and disadvantages of HVDC transmission-Principle Application of DC
transmission- Economic factors- Development of power devices for HVDC Transmission- Thyristor-Light
activated thyristors-MOS controlled Thyristors {MCTS)-Switching and steady state characteristics.
UNIT II 10
THYRISTOR CONVERTERS
Three phases fully controlled Thyristor bridge converters- Operation as rectifiers and line
commutated inverters-Converter equivalent circuits- Parameters and characteristics of rectifiers and
inverters-Series and parallel arrangements of Thyristors- Multibridge converters.
UNIT III 10
CONTROL OF CONVERTERS
Gate control-basic means of control-Power reversal- Desired Features of control-Control characteristics-
Constant current control-Constant extinction angle Control-Stability of control-Tap changer control-
Power control and current limits.
UNIT IV 10
PROTECTION
oasis of protection of HVDC systems-DC reactors-Voltage and current Oscillations-DC line
oscillations- Clearing line fault and re-energizing the line -Circuit breakers-Over voltage protection.
UNIT V 10
HARMONICS, FILTERS AND GROUND RETURN
Characteristics and uncharacteristic Harmonics- Troubles caused by harmonics. Means of reducing
harmonics- Telephone Interference- Harmonic filters-ground return-Current fields-Compatibility with
other services-Electrodes.
L = 40 T = 10 TOTAL = 50
TEXT BOOKS:
1. E W Kelmark, Direct current Transmission, Vol.I.willey Inter science New York 1971.
2. K R Padiyar, HVDC Power Transmission System Technology and System interactions,
Willey Eastern Ltd., 1991.
REFERENCE BOOKS:
1. Colin Adamson and NG Hingorani, High Voltage Direct Current Power transmission,
Garraway limited England 1960.
2. B J KORY (Ed), High Voltage Direct Current Converters and Systems, Macdonald Co.,
London, 1965.
3. B M WEEDY, Electric power systems, John Willey & sons, London, 1979.
It introduces solar energy its radiation, collection, storage and application. It also introduces the
Windenergy, Biomass energy, Geothermal energy and ocean energy as alternative energy sources.
OUTCOMES:
Upon completion of this subject the students can be able to explain different types of non
conventional energy resources.
UNIT I 10
PRINCIPLES OF SOLAR RADIATION
Role and potential of new and renewable source, the solar energy option, Environmental impact
of solar power, Flat plate and concentrating collectors, classification of concentrating collectors,
orientation and thermal analysis, advanced collectors. Different methods, Sensible, latent heat
and stratified storage, solar ponds. Solar Applications- solar heating/cooling technique, solar distillation
and drying, photovoltaic energy conversion.
UNIT II 10
WIND E N E R G Y
Source and potentials, horizontal and vertical axis windmills, performance characteristics, Betz criteria.
UNIT III 10
BIO-MASS
Principles of Bio-Conversion, Anaerobic aerobic digestion, types of Bio-gas digesters, gas yield,
combustion characteristics of bio-gas, utilization for cooking, I. C. Engine operation & economic aspects.
UNIT IV 10
OCEAN ENERGY
OTEC, Principles utilization, setting of OTEC plants, thermodynamic cycles. Tidal and wave
energy: Potential and conversion techniques, mini-hydel power plants, and their economics.
UNIT V 10
DIRECT ENERGY CONVERSION
Need for DEC, Carnot cycle, limitations, principles of DEC. Thermo-electric generators, seebeck,
peltier and joul Thomson effects, figure of merit, materials, applications, MHO generators,
principles, dissociation and ionization, hall effect, magnetic flux, MHO accelerator, MHO
Engine, power generation systems, electron gas dynamic conversion, economic aspects. Fuel
cells, p r i n c i p l e s , fa r a d a y s law's, thermodynamic aspects, selection fuels and operating conditions.
L = 40 T = 10 TOTAL = 50
TEXT BOOKS:
1. Renewable energy resources/ Tiwari and Ghosal/ Narosa.
2. Non-Conventional Energy Sources/G.D.Rai.
REFERENCE BOOKS:
1. Renewable Energy Sources / Twidell & Weir.
2. Solar Energy/ Sukhame.
3. Splar Power Engineering I B.S Magal Frank Kreith & J.F Kreith.
4. Principles 01 Solar Energy I Frank Krieth & John F Kreider.
5. Non-Conventional Energy I AshokV Desai/Wiley Eastern.
6. Non-Convention Energy Systems/KMittal/Wheeler
7. Renewable Enerily Technologies/Ramesh & Kumar /Narosa
OUTCOMES:
Design and implement TMS320F24XX processor for power electronics and drives applications
UNIT I 10
INTRODUCTION
TMS320 Family overview The TMS320C240x Series of DSP controllers Architecture overview C240x
CPU Internal Bus Structure Memory Central Processing unit Memory and I/O Spaces Overview
of Memory and I/O Spaces Program control Address Modes System Configuration and Interrupts
clocks and low Power Modes - Digital Input / output (I/O)
UNIT II 10
INSTRUCTION SET
Assembly language Instruction Instruction Set summary Instruction Description Accumulator,
arithmetic and logic Instruction Auxiliary Register and data page Pointer Instructions TREG, PREG,
and Multiply Instruction Branch Instructions Control Instructions I/O and Memory Instruction.
UNIT III 10
EVENT MANAGER
Event Manager (EV) functional Blocks General purpose Timers Compare units PWM circuits
Associated with compare units PWM Waveform Generation with compare units and PWM
circuits Capture unit Quadrature Encoder pulse circuit Event Manager (EV) Interrupts On Chip
ADC Overview ADC clock Pre-scalar - Calibration Register Bit Description.
UNIT IV 10
ARCHITECHTURE
Architecture over vector of TMS320C240x Central Processing Unit Memory Map Memory
Interface pipeline C240x Addressing Modes C240x Assembly language Instruction Event Manager
functions General purpose Timer Introduction Instruction Set.
UNIT V 10
PHERIPERALS:
Serial Communication Interface (SCI) For 2407 Sc1 Programmable Data Format SC1
Communication format SC1 Port Interrupts SC1 Based Rate Calculations Serial peripheral
Communication (SP1) SPI Operation SPI Interrupts CAN Controller Module Overview of the CAN
network.
L = 40 T = 10 TOTAL = 50
REFERENCE BOOKS:
1. Texas Instruments Inc., TMS320F24x DSP Controller Reference Guide CPU and Instruction
Set - SPRU160C or www.ti.com
2. Texas Instruments Inc., TMS320F240x DSP Controller Reference Guide Systems and Peripherals
SPRU357A or www.ti.com
3. Hamid. A Toliyat, Steven G. Campbell, DSP Based Electro-Mechanical Motion Control CRC
Press 2004, ISBN: 0-8493-1918-8
OBJECTIVES:
To introduce different types of robotics and demonstrate them to identify different parts and
Components.
To write programming for simple operations like pick and place, rotoxim etc.,
OUTCOMES:
Use of MAT Lab software to model the different types of robots and
Calculate work volume for different robots.
OBJECTIVES:
Explain the importance of electrical safety measurements tools available.
Different types of grounding methods for electrical equipment.
Necessary core to handle electrical protection systems.
Management pole in implementation of electrical safety programme and study of various
standards. Pertaining the electrical safety in workplace.
OUTCOMES:
It gives a very comprehensive idea about safety measures to be undertaken by the person before
attains any electrical failure.
UNIT I 10
Primary and secondary hazards- arc, blast, shocks-causes and effects-safety equipment- flash and thermal
protection, head and eye protection-rubber insulating equipment, hot sticks, insulated tools, barriers and
signs, safety tags, locking devices- voltage measuring instruments- proximity and contact testers-safety
electrical one line diagram- electricians safety kit.
UNIT II 10
General requirements for grounding and bonding- definitions- grounding of electrical equipment- bonding
of electrically conducting materials and other equipment- connection of grounding and bonding
equipmentsystem grounding- purpose of system grounding- grounding electrode system- grounding
conductor connection to electrodes-use of grounded circuit conductor for grounding equipment-
grounding of low voltage and high voltage systems.
UNIT III 10
The six step safety methods- pre job briefings- hot -work decision tree-safe switching of power
systemlockout-tag out- flash hazard calculation and approach distances- calculating the required level of
arc protection-safety equipment , procedure for low, medium and high voltage systems- the one minute
safety audit
UNIT IV 10
Electrical safety programme structure, development- company safety team- safety policy- programme
implementation- employee electrical safety teams- safety meetings- safety audit- accident prevention- first
aid- rescue techniques-accident investigation
UNIT V 10
Safety related case for electrical maintenance- reliability centered maintenance (RCM) - eight step
maintenance programme- frequency of maintenance- maintenance requirement for specific equipment
and location- regulatory bodies- national electrical safety code- standard for electrical safety in work
placeoccupational safety and health administration standards.
L = 40 T = 10 TOTAL = 50
TEXT BOOKS:
1. Dennis Neitzel, Al Winfield,Electrical Safety Handbook, McGraw-Hill Education , 4th Edition,2012.
REFERENCE BOOKS:
1. John Cadick, Electrical Safety Handbook, McGraw-Hill School Education Group, 1994.
2. Maxwell Adams.J, Electrical safety- a guide to the causes and prevention of electric hazards,The
Institution of Electric Engineers, 1994.
3. Ray A. Jones, Jane G. Jones, Electrical safety in the workplace, Jones & Bartlett Learning, 2000.
OUTCOMES:
UNIT I 10
RENEWABLE ENERGY POLICY AND LEGISLATION
Rural Energy - Biogas plants - Improved biomass cooking stoves - Biomass production and utilization
briquetting and gasifiers - Integrated Rural Energy Programme
UNIT II 10
SOLAR ENERGY
Solar Photovoltaic systems - Solar thermal systems - Solar Energy Centre
UNIT III 10
POWER GENERATION
Biomass Power - Wind Power - Small Hydro Power - Solar photovoltaic Power Solar Thermal Power -
Energy from Urban, Municipal and Industrial Wastes.
UNIT IV 10
NEW TECHNOLOGY
Geothermal energy - ocean energy - alternate fuel for surface transport including electric vehicles -
chemical sources of energy including fuel cells and hydrogen energy
UNIT V 10
R&D- INDIAN CONTEXT
Indian Renewable Energy Development Agency Ltd - Information and Public Awareness - International
Relations - Integrated Finance Planning - co-ordination and administration.
L = 40 T = 10 TOTAL = 50
TEXT BOOKS:
REFERENCES:
1. www. mnes.nic.in
2. www.indiasolar.com
3. www.bioenergyindia.kar.nic.in
4. www.niot.res.in
5. www.geos.iitb.ac.in
6. www.alt-e.blogspot.com
OBJECTIVES:
To study about the power generation theory.
To study about the power measurements.
To study about the analyses used in powerplants.
To study about the boiler control loops.
To study about the boiler control turbine.
OUTCOMES:
Ability to understand the analyses the instruments synthesis power plant.
UNIT I 10
OVERVIEW OF POWER GENERATION
Brief survey of methods of power generation - hydro, thermal, nuclear, solar and wind power -
importance of instrumentation in power generation - thermal power plants building blocks
details of boiler processes UP&I diagram of boiler cogeneration.
UNIT II 10
MEASUREMENTS IN POWER PLANTS
Electrical measurements current, voltage, power, frequency, power factor etc. non electrical
parameters flow of feed water, fuel, air and steam with correction factor for temperature steam
pressure and steam temperature drum level measurement radiation detector smoke density
measurement dust monitor.
UNIT III 10
ANALYZERS IN POWER PLANTS
Flue gas oxygen analyzer analysis of impurities in feed water and steam dissolved oxygen analyzer
chromatography PH meter fuel analyzer pollution monitoring instruments.
UNIT IV 10
CONTROL LOOPS IN BOILER
Combustion control air/fuel ratio control furnace draft control drum level control main stem and
reheat steam temperature control super heater control at temperature deaerator control
distributed control system in power plants interlocks in boiler operation.
UNIT V 10
TURBINE MONITORING AND CONTROL
Speed, vibration, shell temperature monitoring and control steam pressure control lubricant oil
temperature control cooling system
L = 40 T = 10 TOTAL = 50
TEXT BOOKS:
REFERENCE BOOKS:
1. Elonka,S.M.and Kohal A.L.Standard Boiler Operations, McGraw Hill, New Delhi, 1994.
2. R.K.Jain, Mechanical and industrial Measurements, Khanna Publishers, New Delhi, 1995
OBJECTIVES:
To study about the basic concepts of PLC.
To educate the programming of PLC .
To study about the PLC.
To study about and analyses the sample data control systems.
To study mathematical modeling of a process.
OUTCOMES:
Ability PLC and DCS in process control industry
UNIT I 10
Evolution of modern day PLC relay based PLC microprocessor based PLC input and output modules
other functional elements personal computer as PLC.
UNIT II 10
Programming the PLC ladder logic diagram Boolean language on line and off line programming aids
communication in PLC typical; applications of PLC PID controls capability in programmable
controllers.
UNIT III 10
Evolution of DCS typical architecture local control unit (LCU) and architecture LCU language LCU
process interfacing issues communication system requirements architectural issues protocol issues-
communication media message security communication system standards field bus, HART.
Operation interface requirements display alarms and alarms management engineering interface
requirements.
UNIT IV 10
Z Transform inverse z transform pulse transfer function analysis of closed lope sampled data
control system stability analysis controllability and observability of time invariant systems. Design
of control algorithm using Z transform PID algorithms
design for load changes.
UNIT V 10
Mathematical modeling of a process first order, second order process without and with pure
delay. Comparison of DCS with direct digital control and supervisory control reliability aspects
redundancy self diagrams. Factors to be considered in selecting a DCS.
L = 40 T = 10 TOTAL = 50
TEXT BOOKS:
1. Michal p Lucas Distributed control systems, Van Noster and Reinhold co, 1986.
2. B.C Kuo, Digital control system, Holt, Reinhart and Winston Inc, 1980.
REFERENCE BOOKS:
1. F.D.Petruzella,programmable logic controllers- McGraw Hill, 1988.
2. Thomas Hughes programmable controllers, Instrument society of America, 1992.
M.Gopal, digital controls engineering wiley Eastern, 1989.
OUTCOMES:
Learners will attain basic knowledge of Neural and Fuzzy logic controllers.
Ability to apply the neuro fuzzy concepts in application of power system.
UNIT I 10
ARTIFICIAL NEURAL NETWORKS
Introduction to Artificial Neural Networks-Fundamental concepts, weights, biases and thresholds-
Artificial models-Linear capability-Common activation functions-Learning rules and Learning methods
of ANN- Single Layer, Multilayer Feed forward network Recurrent network.
UNIT II 10
NEURAL NETWORK ARCHITECTURES AND ALGORITHMS
Mcculloh Pitts neuron-Hebbnet-Perceptron-Adaline-Hopfield net-Maxnet-Mexican HatHamming net-
Kohonen self-organizing map-Adaptive resonance theory-Back propagation neural net.
UNIT III 10
NEURAL COMPUTING
Terminology-Adaptive co-efficient connection- Learning law-processing elements cheduling function-
Transfer function-Transformations- Weights-Application of neural computing for pattern classification
and recognition.
UNIT IV 10
FUZZY THEORY
Fuzzy set theory- Fuzzy relations-Linguistic variables-Membership functions-fuzzy to crisp conversions-
fuzzy rule base-choice of variables-derivation of rules-Defuzzification methods-Fuzzy logc control-
Structure of FLC-Mamdani and sugeno Fuzzy systems.
UNIT V 10
NEURO FUZZY CONTROL
Cognitron and Neocognitron Architecture- Training Algorithm and application-Fuzzy associative
memories- fuzzy and neural function estimators-FAM system Architecture Comparison of Fuzzy and
Neural systems- Adaptive neuro, Adaptive Fuzzy, Adaptive Neuro-Fuzzy interface systems-Neuro
Controller, Fuzzy logic Controller for a temperature process and aircraft landing problem.
L = 40 T = 10 TOTAL = 50
REFERENCE BOOKS:
1. Lawrene Fausset, Fundamentals of neural networks, Prentice Hall, 1994.
2. D.Drainkov, H.Hellendoorn arrow, M.Reinfrank, An Introduction to Fuzzy control,
Narosa publishing Co., New Delhi, 1996.
3 Timothy J.Ross, Fuzzy logic with Engineering Applications, Mc Graw Hill,
Newyork, 1996.
4 S.N. Sivanandam, S.N.Deepa, Principles of Soft Computing, Wiley
India Pvt. Ltd., New Delhi, 2007.
5 J.M.Zurada, Introduction to Artificial Neural Systems, Jaico Publishing House.
OUTCOMES:
Learners will attain basic knowledge of intelligent controllers.
Ability to apply the intelligent controllers. Concepts in application of power system.
UNIT I 10
INTRODUCTION
Definition - architecture difference between conventional and expert system.
UNIT II 10
KNOWLEDGE ACQUISITION
Knowledge representation and formal logic -knowledge engineer knowledge acquisition techniques
concept formalisation knowledge representation development knowledge acquisition for core
proplem knowledge acquisition without knowledge engineers.
UNIT III 10
EXPERT SYSTEM TOOLS
Problem solving start engines languages for expert system development expert system shells -
LISP machines PCbased expert system tools
UNIT IV 10
FUZZY MODELING AND CONTROL
Fuzzy sets Fuzzy set operators Fuzzy Reasoning Fuzzy propositions Linguistic variable
Decomposition and Defuzzification Fuzzy systems: case studies
UNIT V 10
NEURAL CONTROLLERS
Introduction: Neural networks - supervised and unsupervised learning-neural network models
single and multi layers back propagation - learning and training. Neural controllers case studies.
L = 40 T = 10 TOTAL = 50
TEXT BOOKS:
1. Rolston D.W., Principles of Artificial and Expert Systems Development, McGraw Hill
Book Company, International Edition
2. Kosko B, Neural Networks and Fuzzy Systems, Prentice Hall of India Pvt. Ltd, 1994.
REFERENCE BOOKS:
1. Kli G.J and Folger T.A., Fuzzy Sets, and Information', Prentice Hall Publication.
2. James A.Freeman, David M. Skapura, Neural Networks Algorithms , Applications
and Programming Techniques', Addison Wesley Publishing Company 1992.
To study operation and design in steady state stability, transient stability and dynamic stability
OUTCOMES:
Ability to understand and analyze power system stability, control and protection
UNIT I 10
THE STABILITY PROBLEM
Concept and importance of stability in power system operation and design. Steady state, transient
and dynamic stability - Qualitative treatment of stability studies on Network analyzers and digital
computers.
UNIT II 10
SWING EQUATION AND ITS SOLUTION
The swing equation of machines connected to an infinite bus bar and two machines connected together
- Swing curves solution by point and Eulers method.
UNIT III 10
EQUAL AREA CRITERION FOR STABILITY
Equal criterion, calculation of critical, clearing angle by equal area criterion of various fault
conditions. Effect of reclosure. Factors affecting transient stability and its improvement.
UNIT IV 10
EXCITATION SYSTEMS
Types of excitation systems, AVR Calculation of exciter response by graphical integration and step-by-
step method. Effect of speed governing system, inertia and damping on steady state and transient
stability.
UNIT V 10
STEADY STATE STABILITY
Significance of steady state stability, power limit of transmission systems. Clarkes diagram of
two machine systems with and without losses. Steady state stability of one machine connected to an
infinite bus bar.
L = 40 T = 10 TOTAL = 50
TEXT BOOK:
1. K.A. Gangadhar, Analysis and stability of Electric power system, Khanna publishers, 2nd
edition, 1993.
REFERENCE BOOKS:
OBJECTIVES:
To make the students understand graphics concepts and develop, design and
implement two and three dimensional graphical structures using OpenGL.
To understand multimedia compression techniques and applications of multimedia.
OUTCOMES:
After completion of the course the students are expected to be able to:
Understand how to generate line, circle and ellipse also how to create 2D object and
various transformation techniques.
Understand various 3D Transformation techniques using OpenGL.
Understand multimedia compression techniques and applications