Professional Documents
Culture Documents
LAB REPORT
Experiment Code: H
(Part I)
Tension Test
Mechanical Behaviour
of Mild Steel.
Group 38
ME16B144
ME16B145
ME16B146
AIM
To demonstrate mechanical properties of mild steel, by subjecting it to tensile deformation.
APPARATUS
1. Universal Testing Machine (UTM)
2. Vernier callipers
INTRODUCTION
Steel is an important material used in majority of engineering applications. It is an alloy of
carbon and iron. Depending upon the percentage contents of carbon and iron, steel having various
different qualities can be obtained, e.g. more carbon content in steel increases its strength and brittle
nature, while iron content in steel is responsible for its ductility.
During tension test, a specimen of a given material, generally round bar, is subjected to
tensile deformation and from that force-deflection curve till failure is obtained, for that material. By
using this experimental data one can inspect about the mechanical strength of the material.
THEORY
Engineering stress(S):- In tensile bar, it is a measure of the intensity of the internal forces.
Mathematically it is given as the ratio of axial force to unit original area(ie. area of cross
section before deformation of the bar)
S= F/A0
Engineering strain (e):- It is a measure of deformation caused due to the subjected
load/stress. Mathematically it is given as the ratio of change in length to original length(ie.
the length before deformation)
e= l/l0
True stress():- It is given as axial force per unit current area(ie. final area after deformation)
= F/A= S*(1+e)
EXPERIMENTAL PROCEDURE
1. Initially using Vernier callipers, measure the diameter of the round tensile rod at three
different positions and find its average diameter.
2. Also find the gauge length of the steel rod by using Vernier callipers.
3. Run the software used for recording the experimental data and create a new file to store the
data.
4. Now install the specimen in machine without subjecting it to large stress. Provide the
required information about the specimen to the program.
5. Now start the experiment, by slowly opening the hydraulic valve and thereby subjecting the
test rod to displacement. This displacement is obtained by the hydraulic pressure.
6. Observe the elongation of rod subjected to displacement. Eventually we observe the neck
formation and finally fracture in the process of loading.
7. Note down the critical points, for example, the load at which deformation starts localizing (or
formation of neck region), sudden change in linearity of graph etc.
8. Observe the features of the fractured surface.
OBSERVATIONS
Vernier Callipers:-
o Main Scale Least Count= 1mm
o Vernier Scale Least Count = 0.02mm
2. Post-failure data:
Failure load:
Final diameter:
MSD=4, VSD=45
D = (MSD x LC of Main Scale) + (VSD x LC of Vernier Scale)
D= 4+ (45 x 0.02) = 4.90mm
1. Pre-test data:
a. Length of uniform cross section, L0:
MSD=44, VSD=30
2. Post-failure data:
a. Failure load:
b. Final diameter:
MSD=6, VSD=4
D = (MSD x LC of Main Scale) + (VSD x LC of Vernier Scale)
D= 6+ (4 x 0.02) = 6.08mm
APPARATUS
Three chalk bars.
INTRODUCTION
Materials, depending upon their ability to absorb energy before fracture, can be classified as
brittle and ductile.
i. Brittle materials:
These materials when subjected to load behave elastically and when point of
fracture is reached, they breakdown without any significant permanent
deformation.
E.g. concrete, ceramics.
ii. Ductile materials:
These materials when subjected to load, initially they behave elastically up
to a certain point and after that they show extensive plastic deformation
before failure.
E.g. aluminium alloys, low carbon steel.
THEORY
Maximum Principle Stress theory:
This theory is applicable to brittle materials. It states that the material fails when the
maximum principle stress in the material reaches a critical value and the plane with
maximum tensile stress is predicted as the failure plane.
EXPERIMENTAL PROCEDURE
1. Take the chalk bars and subject them to axial, torsional and 3 point bend load.
2. Observe the failure planes, their shapes and their location along length of the chalk bars.
OBESERVATIONS