Professional Documents
Culture Documents
Release Note
Ref.: ReleaseNote_EN_2017_0519
Altair
15 Chemin de Malacher - Inovalle
38246 Meylan Cedex
FRANCE
Web: http://www.altair.com
Contents
1 INTRODUCTION .............................................................................................................................................................. 4
1.1 OVERVIEW ............................................................................................................................................................................ 4
1.2 DOCUMENTS TO READ ............................................................................................................................................................. 4
1.3 WARNINGS ........................................................................................................................................................................... 4
2 WARNING LIST................................................................................................................................................................. 4
2.1 MOTOR FACTORY DESIGN AREA ....................................................................................................................................... 4
2.2 MOTOR FACTORY TEST AREA ............................................................................................................................................ 5
2.2.1 Static performance Sine wave Torque speed........................................................................................................... 5
2.2.2 Miscellaneous................................................................................................................................................................ 5
2.3 MOTOR FACTORY REPORT ................................................................................................................................................ 6
2.4 MOTOR FACTORY QUICK BUILDING .................................................................................................................................. 6
2.5 PART LIBRARY ..................................................................................................................................................................... 6
2.6 MOTOR CATALOG ............................................................................................................................................................... 7
2.7 MATERIALS ......................................................................................................................................................................... 8
2.8 SUPERVISOR USER PREFERENCES ...................................................................................................................................... 8
1 INTRODUCTION
1.1 Overview
The first version of FluxMotor is available. The use of FluxMotor requires 15 HWUs.
InstallGuide_EN_2017_0519.pdf
UserGuide_Supervisor_EN_2017_0519.pdf
UserGuide_MotorFactory_EN_2017_0519.pdf
UserGuide_MotorCatalog_EN_2017_0519.pdf
UserGuide_PartLibrary_EN_2017_0519.pdf
UserGuide_PartFactory_EN_2017_0519.pdf
UserGuide_Materials_EN_2017_0519.pdf
1.3 Warnings
The list of the main troubles or bugs present in the first version of FluxMotor is presented
below.
2 WARNING LIST
2.1 Motor Factory Design area
1) The default polarization of the magnet Imi_Layer_01C is wrong. The users must
corrected it by using the polarization function of Motor Factory.
2) When using a magnet with a symmetric topology and consequent poles, the
visualization of the symmetric part of the polarization is wrong. However, the
computation is right.
3) Sometimes, the modification of user input parameters can take a few seconds before
being taken into account.
5) When using unit different from SI for current, voltage and torque, the iso-values are not
displayed in the characteristic curve of the test: Static performance Sine wave Torque
speed.
2.2.2 Miscellaneous
1) Sometimes (very rarely) results of a test cannot be saved. In that case, all the other test
results not yet saved wont be able to be saved.
It is recommended to save test results as soon as they are available.
3) The automatic computation of the rotor initial position is wrong when a magnet with
consequent pole topology is used.
4) For the following tests: Static performance Sine wave Torque speed and Characterization
Model MAPS, the displaying of maps axis values are not displayed when the considered
values are very low.
2) In Excel file, defining the part topology (dimension), it is not possible to select the following
arrow (---->) with combo box. The users must write the arrow like this: ---->
2) When quick building panel is opened it is possible to expand the main menu of Motor Factory (it
is not normal). Clicking on the available actions lead to error. See illustration below.
3) When the users create a new motor by using "Quick Building" panel,
This motor still exist, after exiting from Motor Factory and without ever having saved it.
2) Attachments of Library: if the users want to remove one attachment among several, the
"Remove action" always removes the first attachment in the list.
2) Attachments of Catalog: if the users want to remove one attachment among several, the
"Remove action" always removes the first attachment in the list.
3) When selecting multiple motors and comparing them, the resulting output table does not have
any units.
4) Sometimes (very rarely), there is an error message when running "Motor Catalog" just after
having installed FluxMotor.
"Motor catalog" doesn't work the first time, but it works when second launch.
2.7 Materials
1) When opening Materials application, six warning message are appearing. They indicate that
there is a missing user repertory.
1) The number of decimal after dot defined in user preferences is not take into account.