Professional Documents
Culture Documents
NWD-008717-018 28/32
Work instruction of connector for PASOLINK.
6
Rev.:01 Dateofissue:15.11.04 Maker work instruction :JAHL-2050-11
Product name/
Specification Acceptable cable Specification
maker model
5D-FB-E RKS-W-1007-036
TNC-LP-5DFB(4) /
12 CBE-108262-001-00 5D-FB-E(LW) CBE-101412-001-00
TNC0B106D53
5D-FB-E(LW)N CBE-108314-001-00
[Outlines of parts]
Cable jacket Aluminum tape Plug body Sleeve Gasket Washer Shell
Center conductor
Tools
(Knife),(cutter),(nipper),(tweezers),(File),(measure) Clearance gauge) etc.,
( 16mm) (Spanner , Torque spanner 16mm)
procedure
1. Remove of jacket of cable 3. Center conductor processing
1)
burr
Sleeve
(knife) (cutter) cut
Tools (measure) etc., 5.5~6.5
10~11
4. Connector assembly 4) ( )
1) 2 3N m
1) Insert the cable assembly in a plug body. 4) Tighten the connection to the torque value of
2~3N m.
Plug body) Cable assy
Gap is reference
(Plug body)
1.8 2.0mm
(shell)
2)
3) 3~4 :1
3) screw thread
1
3~4
Finished goods