You are on page 1of 1

FL

RC
OO
OA
TIN
GS
ISONEM BETON PAINT
Beton Floor Paint
ISONEM BETON PAINT is a product, which can be produced as one-component color or transparent for porous surfaces such as concrete,
screed, asphalt, paving stone, etc., that has been developed as an alternative to the epoxy and polyurethane based floor coverings. It features
UV and weather resistance, high wear resistance, fast drying and durability. It well penetrates and holds on to the application surfaces. It is easy
to apply. Thanks to its high mechanical resistance, it creates a long lasting film on the surfaces. Yellowing, fading or lifting off over time does
not occur. It is wear resistant and not effected by the human and vehicle traffic. It is waterproof and resistant to various chemicals.

AREAS OF USAGE:
Concrete, screed, asphalt, paving stones,
Parking and garages,
Factory and warehouse floors
Traffic islands and roadsides, curbs for marking,
Pool sides, tourist facilities, bicycle paths, coastlines, walkways, squares, parks and gardens.

METHOD OF APPLICATION:
Application surface must be clean and dry. Do not apply on damp and wet surfaces. Do not apply on the surfaces, where water and water vapor
pressure from the negative side and salt efflorescence are present. Oily and dirty surfaces must be cleaned by solvent-based cleaners.
Application: Apply with a brush, roller or by spraying in two coats. After the first coat fully dries (around 4 hours), finish the application by
applying ISONEM BETON PAINT. Protect the newly applied surface from dirt, dust, water and rain until a through-dry state.

CONSUMPTION: Depending on absorbency of the surface and color, 200 - 250 gr/m2 (2 coats)
PACKAGING: 18 kg in tin buckets
STORAGE: 12 months in its original unopened package in a cool and dry environment.

The information contained in this leaflet has been prepared to our best knowledge, and in consistency with the results of our experiments and experience, and are the products of our know-how based on our accumulation of decades. However, the application of our products accurately
and successfully, is entirely beyond our control and responsibility. Therefore, the scope of our liability is limited to the quality of our products and this technical leaflet supercedes all the previous technical leaflets and all the explanations and the information contained in the product labels. 003
Our Products do not Fall Under the Regulations Regarding Biocidal Products.

You might also like