Professional Documents
Culture Documents
Transmisor de 2 hilos
programable
No.5331V115-ES
Desde n0 de serie 141365001
CCOE
Revision Notes
The following list provides notes concerning revisions of this document.
1707
TRANSMISOR DE 2 HILOS
PROGRAMABLE
5331
CONTENIDO
Aplicacin.................................................................................................... 2
Caractersticas tcnicas........................................................................ 2
Montaje / instalacin.............................................................................. 2
Aplicaciones............................................................................................... 3
Pedido: 5331............................................................................................. 4
Especificaciones elctricas.................................................................. 4
Conexiones................................................................................................. 8
Diagrama de bloques.............................................................................. 9
Programacin............................................................................................. 10
Especificaciones mecnicas................................................................ 11
Montaje de los hilos del sensor......................................................... 11
Appendix..................................................................................................... 12
ATEX Installation Drawing - 5331A............................................. 13
ATEX Installation Drawing - 5331D............................................. 14
IECEx Installation Drawing - 5331A............................................. 16
IECEx Installation Drawing - 5331D............................................. 17
FM Installation Drawing - 5331D.................................................. 19
CSA Installation Drawing - 5331D................................................ 21
INMETRO Instrues de Segurana - 5331A............................ 22
INMETRO Instrues de Segurana - 5331D............................ 23
5 331V1 1 5 - ES 1
TRANSMISOR DE 2 HILOS PROGRAMABLE
5331
Aplicacin
Medida de temperatura linealizada con Pt100Pt1000, Ni100Ni1000 sensor
termopar.
2 5331V115- ES
APLICACIONES
Instalacin de 2 hilos
en la sala de control
RTD a 4...20 mA
V+
+
+
-
mA
Instalacin de 2 hilos
en la sala de control
TC a 4...20 mA
+
V+
+
+
-
-
-
mA
Instalacin de 2 hilos
en la sala de control
Resistencia a 4...20 mA
V+
+
+
-
mA
Instalacin de 2 hilos
en la sala de control
mV a 4...20 mA
+
V+
+
+
-
mA
-
5 331V1 1 5 - ES 3
Pedido: 5331
Temperatura Aislamiento
Tipo Versin
ambiente galvnico
Especificaciones elctricas
Rango de especificaciones:
-40C a +85C
Especificaciones comunes:
Voltaje de alimentacin, CC
Estndar.............................................................. 7,2...35 V
CSA, FM, ATEX, IECEx & INMETRO............ 7,2...30 V
Disipacin de potencia
Estndar.............................................................. 25 mW...0,8 W
CSA, FM, ATEX, IECEx & INMETRO............ 25 mW...0,7 W
Cada de tensin....................................................... 7,2 VCC
Voltaje de aislamiento, test / operacin......... 1,5 kVCA / 50 VCA
Tiempo de calentamiento..................................... 5 min.
Interfase de comunicaciones............................... Loop Link
Relacin seal / ruido............................................. Mn. 60 dB
Tiempo de respuesta (programable)................. 1...60 s
Tiempo de chequeo de la EEprom..................... < 3,5 s
Seal dinmica, entrada......................................... 20 bits
Seal dinmica, salida............................................. 16 bits
Temperatura de calibracin.................................. 20...28C
Precisin, la mayor de los valores generales y bsicos:
Valores generales
Tipo de Precisin Coeficiente de
entrada absoluta temperatura
Todas 0,05% d. intervalo 0,01% d. intervalo/C
4 5331V115- ES
Valores bsicos
Tipo de Precisin Coeficiente de
entrada bsica temperatura
RTD 0,2C 0,01C/C
R lin. 0,1 10 mW / C
Volt 10 V 1 V / C
Tipo TC:
E, J, K, L, N, T, U 1C 0,05C / C
Tipo TC: B, R, S,
W3, W5, LR 2C 0,2C / C
5 331V1 1 5 - ES 5
Entrada TC:
Temperatura Temperatura Intervalo
Tipo mn. mx. mn. Estndar
B +400C +1820C 100C IEC584
E -100C +1000C 50C IEC584
J -100C +1200C 50C IEC584
K -180C +1372C 50C IEC584
L -100C +900C 50C DIN 43710
N -180C +1300C 50C IEC584
R -50C +1760C 100C IEC584
S -50C +1760C 100C IEC584
T -200C +400C 50C IEC584
U -200C +600C 50C DIN 43710
W3 0C +2300C 100C ASTM E988-90
W5 0C +2300C 100C ASTM E988-90
LR -200C +800C 50C GOST 3044-84
Offset mx................................................................... 50% del valor mx. selec.
Compensacin soldadura fra............................... < 1,0C
Deteccin de error en el sensor.......................... S
Corriente del sensor:
Cuando detecta error..................................... Nom. 33 mA
Cuando no detecta error.............................. 0 mA
Entrada de voltaje:
Rango de medida...................................................... -12...+800 mV
Intervalo mn............................................................... 5 mV
Offset mx................................................................... 50% del valor mx. selec.
Resistencia de entrada........................................... 10 M
Salida:
Salida de corriente:
Rango de la seal..................................................... 4...20 mA
Rango mn. de la seal........................................... 16 mA
Tiempo de actualizacin........................................ 440 ms
Seal de salida si hay error en la EEprom...... 3,5 mA
Resistencia de carga............................................... (Valiment. - 7,2) / 0,023 []
Estabilidad de carga................................................ < 0,01% del intervalo / 100
Deteccin de error en el sensor:
Programable................................................................ 3,5...23 mA
NAMUR NE43 Escala Alta..................................... 23 mA
NAMUR NE43 Escala Baja..................................... 3,5 mA
6 5331V115- ES
Aprobaciones:
EMC ................................................................................ 2014/30/UE
CCOE............................................................................... P337392/1
RoHS.............................................................................. 2011/65/UE
EAC ................................................................................ TR-CU 020/2011
Aprobacin marina:
DNV-GL, Ships & Offshore..................................... Standard for Certification No. 2.4
Ex / S.I.:
ATEX 2014/34/UE
5331A....................................................................... KEMA 10ATEX0002 X
5331D...................................................................... KEMA 06ATEX0062 X
Certificado FM............................................................ FM17US0013X
Certificado CSA.......................................................... 1125003
IECEx.............................................................................. DEK 13.0035X
INMETRO...................................................................... DEKRA 16.0013 X
CCOE............................................................................... P337392/2
EAC Ex TR-CU 012/2011...................................... RU C-DK.GB08.V.00410
5 331V1 1 5 - ES 7
CONEXIONES
Entrada:
RTD, 2 hilos RTD, 3 hilos RTD, 4 hilos TC, CJC interna
3 4 5 6 3 4 5 6 3 4 5 6 3 4 5 6
- +
- +
- +
Resistencia, 4 hilos
3 4 5 6
Salida:
Instalacin de 2 hilos
1 2
+ mA -
8 5331V115- ES
5 331V1 1 5 - ES 9
Alimentacin +
7,2...35 VCC
1
mV RTD, R lin. TC
DIAGRAMA DE BLOQUES
- hilo 4 mA
4 3 2 CJC
ext. 6
5
Comm
+ +
CJC
int. C PU
mV M UX PGA A /D
- -
4
D /A
3
Entrada tierra 0...16
mA
E E PRO M
Alimentacin -
2 mA
4...20 mA
5331
PROGRAMACIN
El Loop Link es un interfase de comunicaciones alimentado por pila que es
necesario para programar el 5331.
Para programar, por favor, mirar el dibujo de abajo y las funciones de ayuda en el
PReset.
Equipo
receptor
Desconectar
1 +Valimentacin
Rojo * Amarillo Entrada
2
Negro * Verde
5331
Conector
08:30:00
Language O ption
O utput C om m unication
File Product Input PRetop 5331
2004-8-10
Date:
Serial no: 043201594
Tag no: PRelectronics
Analog output
Analog input O utput type: 4 - 20mA
Pt100 DIN/IEC
Input type: Sensor error: Upscale
0.00 - 50.00 C
Input range:
3-wire
C onnection:
L oop
p: ------
C old junction com
1.00 sec
Response time:
10 5331V115- ES
Especificaciones mecnicas Montaje de los hilos del sensor
+ -
+ -
6 mm
33 mm 20.2 m m
44 mm
Los hilos del sensor deben ser montados
entre las placas metlicas.
5 331V1 1 5 - ES 11
APPENDIX
12 5331V115- ES
5331QA02
LERBAKKEN 10, 8410 RNDE DENMARK. WWW.PRELECTRONICS.COM
Por tipo de proteccin Ex nA el transmisor debe ser montado en una pastilla que dispone de un
nivel de proteccin contra la intergridad de, al menos, IP54, conforme con la EN 60529.
Para una temperatura ambiente 60C, la resistencia de los cables al calor debera disponer de
un ratio de, al menos, 20 K por encima de la temperatura ambiente.
5 331V1 1 5 - ES 13
5331QA01
LERBAKKEN 10, 8410 RNDE DENMARK. WWW.PRELECTRONICS.COM
Area peligrosa
Zona 0, 1, 2, 20, 21, 22 Area no peligrosa
Terminal: 3,4,5,6 6
Uo: 9,6 VCC
Io: 25 mA 5 1+
Po: 60 mW
Lo: 33 mH 4 2 -
Co: 2,4F
3 5331D
5334B
Barrera
Barrier
Terminal: 1,2
Ui: 30 VCC
Ii: 120 mA
Pi: 0,84 W
Li: 10H
Ci: 1,0nF
14 5331V115- ES
5331QA01
LERBAKKEN 10, 8410 RNDE DENMARK. WWW.PRELECTRONICS.COM
Notas de la instalacin
El circuito del sensor no est aislado galvnicamente de forma infalible del circuito de entrada.
Sin embargo, el aislamiento galvnico entre los circuitos es capaz de resistir un test de tensin
de 500 VCA durante 1 minuto.
Si el transmisor est instalado en atmsferas explosivas que requieren el uso del equipo de la
categora 1 G, 1 M 2 M, y si la pastilla se hace del aluminio, debe ser instalado de tal manera
que, incluso en el caso de incidentes raros, las fuentes de ignicin debido al impacto y a la
friccin, sean resistidas; si la pastilla se hace de materiales no metlicos, las cargas
electrostticas debe ser evitadas.
El transmisor debe ser instalado en una caja metlica de formato B, de acuerdo con la DIN
43729, ya que dispone de un nivel de proteccin contra la intergridad de, al menos, IP 6X,
conforme con la EN 60529, siempre que sea vlido para la aplicacin y est correctamente
instalado.
Los cables descubiertos y los elementos escondidos deberan ser usados cuando sean vlidos
para la aplicacin y estn correctamente instalados.
Para una temperatura ambiente 60C, la resistencia de los cables al calor debera disponer de
un ratio de, al menos, 20 K por encima de la temperatura ambiente.
5 331V1 1 5 - ES 15
5331QI02
LERBAKKEN 10, 8410 RNDE DENMARK. WWW.PRELECTRONICS.COM
Standards IEC 60079-0 : 2011, IEC 60079-11 : 2011, IEC 60079-15 : 2010
Installation note:
For installation in a potentialy explosive gas atmosphere, the following instructions apply:
For nA installation the transmitter must be installed in an metal enclosure, e.g. a form B
enclosure providing a degree of protection of at least IP54 according to IEC60529 or in an
enclosure with type of protection Ex n or Ex e.
Cable entry devices and blanking elements shall fulfill the same requirements
For an ambient temperature 60C, heat resistant cables shall be used with a rating of at
least 20 K above the ambient temperature.
For installation in a potentially explosive dust atmposphere, the following instructions apply:
The surface temperature of the enclosure is equal to the ambient temperature plus 20 K, for a
dust layer with a thickness up to 5 mm.
The transmitter must be mounted in a enclosure according to DIN 43729 that provides a
degree of protection of at least IP6X according to IEC60529, and that is suitable for the
application. Cable entry devices and blanking elements shall fulfill the same requirements.
16 5331V115- ES
5331QI01
LERBAKKEN 10, 8410 RNDE DENMARK. WWW.PRELECTRONICS.COM
Hazardous area
Zone 0, 1, 2, 20, 21, 22, M1 Non Hazardous Area
Terminal: 3,4,5,6
Uo: 9.6 VDC
Io: 25 mA 6
Po: 60 mW 1+
5
Lo: 33 mH
Co: 2.4 F 4 2 -
3 5331D
5334B
Barrier
Terminal: 1,2
Ui: 30 VDC
Ii: 120 mA
Pi: 0.84 W
Li: 10 H
Ci: 1.0 nF
5 331V1 1 5 - ES 17
5331QI01
LERBAKKEN 10, 8410 RNDE DENMARK. WWW.PRELECTRONICS.COM
Installation notes.
The sensor circuit is not infallibly galvanic isolated from the input circuit. However, the galvanic
isolation between the circuits is capable of withstanding a test voltage of 500Vac during 1
minute.
In a potentially explosive gas atmosphere, the transmitter shall be mounted in a metal form B
enclosure in order to provide a degree of protection of at least IP20 according to IEC60529. If
however the environment requires a higher degree of protection, this shall be taken into
account.
For installation in a potentially explosive dust atmosphere, the following instructions apply:
For explosive dust atmospheres, the surface temperature of the outer enclosure is 20 K above
the ambient temperature.
The transmitter shall be mounted in a metal enclosure form B according to DIN43729 that is
providing a degree of protection of at least IP6X according to IEC60529, that is suitable for the
application and correctly installed.
Cable entries and blanking elements shall be used that are suitable for the application and
correctly installed.
For an ambient temperature 60C, heat resistant cables shall be used with a rating of at least
20 K above the ambient temperature.
18 5331V115- ES
5300Q502
LERBAKKEN 10, 8410 RNDE DENMARK. WWW.PRELECTRONICS.COM
FM Installation Drawing
Hazardous(Classified)Location NonHazardousLocation
Class I,Division1, Groups, A,B,C,D T4..T6
Class I, Zone 0, AEx ia IIC T4..T6 Associated Apparatus
or Barrier
+ with
Ambienttemperaturelimits
T4:40to+85deg.Celcius
entity Parameters:
T6:40to+60deg.Celcius
UM < 250V
Voc or Uo < Vmax or Ui
Terminal 1 , 2 Isc or Io < Imax or Ii
Vmax or Ui: 30 V Po < Pi
Imax or Ii: 120 mA Ca or Co > Ci + Ccable
Pmax or Pi: 0.84 W 1 2 La or Lo > Li + Lcable
Ci: 1 nF
Li:10 uH
Hazardous(Classified)Location NonHazardousLocation
Class I,Division1, Groups, A,B,C,D T4..T6
Class I, Zone 0, AEx ia IIC T4..T6 Associated Apparatus
or Barrier
+ with
Ambienttemperaturelimits
T4:40to+85deg.Celcius
entity Parameters:
T6:40to+60deg.Celcius
UM < 250V
Voc or Uo < Vmax or Ui
Terminal 1 , 2 Isc or Io < Imax or Ii
Vmax or Ui: 30 V Po < Pi
Imax or Ii: 120 mA Ca or Co > Ci + Ccable
Pmax or Pi: 0.84 W 1 2 La or Lo > Li + Lcable
Ci: 1 nF
Li:10 uH
5 331V1 1 5 - ES 19
5300Q502
LERBAKKEN 10, 8410 RNDE DENMARK. WWW.PRELECTRONICS.COM
Equipment that is FM-approved for intrinsic safety may be connected to barriers based on the ENTITY
CONCEPT. This concept permits interconnection of approved transmitters, meters and other devices in
combinations which have not been specifically examined by FM, provided that the agency's criteria are
met. The combination is then intrinsically safe, if the entity concept is acceptable to the authority having
jurisdiction over the installation.
The entity concept criteria are as follows:
The intrinsically safe devices, other than barriers, must not be a source of power.
The maximum voltage Ui(VMAX) and current Ii(IMAX), and maximum power Pi(Pmax), which the device can
receive and remain intrinsically safe, must be equal to or greater than the voltage (Uo or VOC or Vt) and
current (Io or ISC or It) and the power Po which can be delivered by the barrier.
The sum of the maximum unprotected capacitance (Ci) for each intrinsically device and the interconnect-
ing wiring must be less than the capacitance (Ca) which can be safely connected to the barrier.
The sum of the maximum unprotected inductance (Li) for each intrinsically device and the interconnecting
wiring must be less than the inductance (La) which can be safely connected to the barrier.
The entity parameters Uo,VOC or Vt and Io,ISC or It, and Ca and La for barriers are provided by the barrier
manufacturer.
Hazardous(Classified)Location NonHazardousLocation
Class I,Division2, Groups, A,B,C,D T4..T6
Class I, Zone 2, IIC T4..T6 Associated Apparatus
or Barrier
+
Ambienttemperaturelimits
T4:40to+85deg.Celcius
T6:40to+60deg.Celcius
Terminal 1 , 2
Vmax : 35 V
Ci: 1.0 nF 1 2
Li:10 uH
6 3 Thisdevicemustnotbeconnected
toanyassociatedapparatuswhich
5 4
usesorgeneratesmorethan250
VRMS
SENSOR
20 5331V115- ES
5335QE01
LERBAKKEN 10, 8410 RNDE DENMARK. WWW.PRELECTRONICS.COM
Hazardous area
Non Hazardous Area
T4: -40 Ta 85C
T6: -40 Ta 60C
Barrier
CLASS 2258 04 - PROCESS CONTROL EQUIPMENT - Intrinsically Safe Entity - For Hazardous
Locations
Class I, Division 1, Groups A, B, C and D
Ex ia IIC, Ga
CLASS 2258 84 - PROCESS CONTROL EQUIPMENT - Intrinsically Safe Entity - For Hazardous
Locations - Certified to US Standards
Class I, Division 1, Groups A, B, C and D
Class I, Zone 0, AEx ia IIC, Ga
Warning:
Substitution of components may impair intrinsic safety.
The transmitters must be installed in a suitable enclosure to meet installation codes stipulated in
the Canadian Electrical Code (CEC) or for US the National Electrical Code (NEC).
5 331V1 1 5 - ES 21
5331QB02
LERBAKKEN 10, 8410 RNDE DENMARK. WWW.PRELECTRONICS.COM
Normas ABNT NBR IEC 60079-0 : 2013; ABNT NBR IEC 60079-11 : 2013
ABNT NBR IEC60079-15 : 2012
Para temperatura ambiente >= 60C, fios de resistncia ao calor devem ser usados com uma faixa de
pelo menos 20K acima da temperatura ambiente.
As entradas dos cabos e os elementos de obturao que podem ser utilizados devem ser adequados
aplicao pretendida e corretamente instalados.
A temperatura da superfcie do invlucro igual temperatura ambiente mais 20 K, para uma
camada de p, com uma espessura de at 5 mm.
22 5331V115- ES
5331QB01
LERBAKKEN 10, 8410 RNDE DENMARK. WWW.PRELECTRONICS.COM
Normas ABNT NBR IEC 60079-0: 2013; ABNT NBR IEC 60079-11: 2013
reas classificadas
Zona 0, 1, 2, 20, 21, 22, rea no classificada
Terminais 3,4,5,6
Uo: 9,6 VDC
Io: 25 mA 6
Po: 60 mW 1+
5
Lo: 33 mH
Co: 2,4F 4 2 -
3 5331D
5334B
Barrier
Terminais:
1,2
Ui: 30 VDC
Ii: 120 mA
Pi: 0,84 W
Li: 10H
Ci: 1,0nF
5 331V1 1 5 - ES 23
5331QB01
LERBAKKEN 10, 8410 RNDE DENMARK. WWW.PRELECTRONICS.COM
Notas de instalao
O transmissor deve ser montado em invlucro de metal forma B de acordo com DIN43729 que
est fornecendo um grau de proteo de pelo menos IP6X de acordo com ABNT NBR
IEC60529. O invlucro deve ser adequado para aplicao pretendida e instalado
corretamente.
As entradas dos cabos e os elementos de obturao que podem ser utilizados devem ser
adequados aplicao pretendida e corretamente instalados.
Para temperatura ambiente >= 60C, fios de resistncia ao calor devem ser usados com uma
faixa de pelo menos 20K acima da temperatura ambiente.
24 5331V115- ES
Displays Displays programables con una amplia
seleccin de entradas y salidas para visualizar tempera tura,
volumen, peso, etc. Disponen de linealizacin, escalado y
funciones de medida diferencial, programables va el software
PReset.
Interfases Ex Interfases para seales analgicas y digitales,
as como seales HART. entre sensores, convertidores I/P,
seales de frecuencia y sistemas de control en zonas Ex 0, 1 y 2
y por algunos mdulos en zonas 20, 21 y 22.
www.prelectronics.de
sales-de@prelectronics.com
www.prelectronics.es
sales-es@prelectronics.com
www.prelectronics.it
sales-it@prelectronics.com
www.prelectronics.se
sales-se@prelectronics.com
www.prelectronics.com
sales-uk@prelectronics.com
www.prelectronics.com
sales-us@prelectronics.com
www.prelectronics.cn
sales-cn@prelectronics.com
Head office
Denmark www.prelectronics.com
PR electronics A/S sales@prelectronics.dk
Lerbakken 10 tel. +45 86 37 26 77
DK-8410 Rnde fax +45 86 37 30 85