You are on page 1of 12

Math 21a Final Exam Solutions Spring, 2009

1 (5 points) Indicate whether the following statements are True or False by circling the appropriate
letter. No justifications are required.

T F The (vector) projection of h3, 17, 19i onto h1, 2, 3i is equal to the (vector) projection
of h3, 17, 19i onto h5, 10, 15i.
Solution: This is True, since h5, 10, 15i = 5h1, 2, 3i.
T F The angle between the vectors h1, 3, 7i and h4, 6, 1i is obtuse (greater than 2 ).
Solution: This is True. We calculate the cosine of the angle between u = h1, 3, 7i and
v = h4, 6, 1i by
uv (1)(4) + (3)(6) + (7)(1) 15
cos() = = = < 0.
|u| |v| |u| |v| |u| |v|
Since cos() < 0, the angle must be obtuse.
T F If F = hP, QiZis a vector field with the property that Qx Py = 0, then Greens Theorem
implies that F dr = 0 for any curve C.
C
Solution: This is False. Greens Theorem implies that this integral is zero for any closed
path C, but not for any path at all.
T F The tangent plane to x2 y 2 + 4z 2 = 1 at the point (1, 2, 1) is x 2y + 4z = 1.
Solution: This is True. The normal to the level surface g(x, y, z) = x2 y 2 + 4z 2 = 1 at the
point (1, 2, 1) is g(1, 2, 1). Since g = h2x, 2y, 8zi, the normal is n = g(1, 2, 1) = h2, 4, 8i.
The tangent plane is therefore

h2, 4, 8i hx 1, y 2, z 1i = 0 or 2x 4y + 8z = 2 or x 2y + 4z = 1.

This is the equation given.


T F The two curves C1 , parameterized by r1 (t) = ht2 , ti, and C2 , parameterized by
r2 (t) = h4t2 , ti, both pass through the point (0, 0). At this point, the curvature of
C1 is greater than the curvature of C2 .
Solution: This is False. Here is a graph showing these two parameterized curves:
y ..............
....
...
... C , 1 t 1
1
........ 1
..
...
.
...
. ....
...... ...

.....
...
...
...
. . ...

.....
...

........... C2 , 12 t 12
...

...... ......................
...
...
...
.
............
...
...

.......
...
...
...
.... .
.................................................................................................................................................................................................
.......... x ....
..
... .......... 1 ....
...
.
.
.... ............ ...
..... ............... ...
...
..... .... ...
...
...... ...
....... ....
..
........ ...
...
........ ...

1
..... ...
...
...
...
...
...
..

Intuitively, the curve C2 is curving more at the origin, so has a greater curvature. Heres a
rigorous way of thinking of this. The osculating circle for C1 at the origin is much larger than
the same circle for C2 . But the radius for the osculating circle is the inverse of the curvature
, so this is saying that 11 > 12 . Thus 1 < 2 . Put another way, the curvature for C1 is less
than that of C2 , not greater than.
Math 21a Final Exam Solutions Spring, 2009
2 (4 points) Match the sketch of each quadric surface with the appropriate equation. You do not
need to justify your choices.
(a) x2 + 2y 2 + z 2 = 1 (b) x2 + 2y 2 z 2 = 1
(c) x2 2y 2 z 2 = 1 (d) x2 + 2y 2 z 2 = 0

I. II.

III. IV.

Solution: One way to do this is to look at traces. Heres a little table of traces for our four
equations, together with the corresponding sketch:

Equation x = k trace y = k trace z = k trace Quadric


(a) x2 + 2y 2 + z 2 = 1 ellipses (|x| 1) ellipses (|y| 21 ) ellipses (|z| 1) IV
(b) x2 + 2y 2 z 2 = 1 hyperbolas (all x) hyperbolas (all y) ellipses (all z) II
(c) x2 2y 2 z 2 = 1 ellipses (all |x| > 1) hyperbolas (all y) hyperbolas (all z) I
(d) x2 + 2y 2 z 2 = 0 hyperbolas (all x) hyperbolas (all y) ellipses (all z > 0) III

The difference between II and III comes in the trace at z = 0 in equation (d). There the ellipse turns
into only a point. Another
difference is in the x = 0 trace. For (b) this is a hyperbola but in (d) it
produces two lines z = 2 y (a degenerate hyperbola).
Math 21a Final Exam Solutions Spring, 2009
3 (6 points) Compute the integral

Z 2Z 2x
1
dy dx.
1 2x 2y 3 3y 2 + 4
Hint: Change the order of integration.
Solution: Heres a picture of the region D over which we are integrating. Notice thatthe y
coordinates are bounded below by the line y = 2 x and above by the hyperbola y = 2 x
between x = 1 and x = 2.
y ..............
...
... .....
.....
.. .....
... .....
... .....
.....
... .....
.
. .....
.......... ... .....
............ .....
. ..... ...
. .....
.... .................. .....
.....
... ......... .....
.........
... ......... .....
..
... ........
........ .........
... ........ .....
........ ....
...
1 ... .......... .............
...
...
... ............. ..
....
...
... ..... ........ .... .
......
........
...
... ..... ........ ........
..........
...
... ..... ...... ..........
..........
.......... .
...
...
..... ..... ............
............
... ..... .... ............
..........
...
... ..... ... ..........
..........
........
...
... ..... ... .......
......
...
...
........ ....
...
. .. ..
............................................................................................................................................................................................................................................................................................
.
.. . ....
... ... ........
... ... ..... x
...
...
1 2 .
..
...
.. .....
.....
.....
.....
... .
..
. .....
... .
... .....
... .
...
.
..

That is, we can write R as



R = {(x, y) : 2 x y 2 x, 1 x 2}.

To change the order of integration, we write x in terms of y for both curves. The line is simply
x = y 2 and the parabola is x = 2 y 2 . That is, the region R can also be written as

R = {(x, y) : y 2 x 2 y 2 , 0 y 1}.

Thus we can re-write the integral as


Z 2 Z 2x Z 1 Z 2y2
1 1
3 2
dy dx = dx dy.
1 2x 2y 3y + 4 0 2y 2y 3y 2 + 4
3

Now we integrate:
Z 1
2y2
x
= dy
0 2y 3 3y 2 + 4 2y
1 1
(2 y 2 ) (2 y) y y2
Z Z
= dy = dy.
0 2y 3 3y 2 + 4 0 2y 3 3y 2 + 4

Now the substitution u = 2y 3 3y 2 + 4 produces du = 6(y 2 y) dy, so we can continue


y=1  1
Z
11 1 3 2
= du = ln 2y 3y + 4
y=0 6u 6 0

1
= (ln(4) ln(3)) .
6
Math 21a Final Exam Solutions Spring, 2009
4 (7 points) Find the volume of the solid enclosed by the cylinders x2 + z 2 = 1 and y 2 + z 2 = 1.
z
z

y y
x
x

Solution: There are


Z Z Zmany ways to set up the integral. Lets do it as a triple integral, so if E is the
solid, then we want 1 dV . We can describe our solid as E = {(x, y, z) : x2 +z 2 1, y 2 +z 2 1}.
E
Its hard to write bounds for z in terms of x and y: we know that z 2 1 x2 and z 2 1 y 2 , so
we would have to write something like z 2 the smaller of 1 x2 and 1 y 2 , which would be a big
mess. We can get around this problem by making the z integral the outer integral. Then we just
have to say that z goes from 1 to 1.

Since x2 1 z 2 and y 2 1 z 2 , so x andy both go from 1 z 2 to 1 z 2 . (That is, the
z =constant trace is a square of side length 2 1 z 2 .) This gives an iterated integral
Z 1 Z 1z 2 Z 1z 2 Z 1 Z 1z 2 p
1 dx dy dz = 2 1 z 2 dy dz
1 1z 2 1z 2 1 1z 2
Z 1
= 4(1 z 2 ) dz
1
z=1
4z 3
= 4z
3 z=1
16
=
3

Another approach is to split the region up into equally-sized pieces and find the volume of a single,
representative piece. Well cut the region by two planes, y = x and y = x. The advantage here is
that the height (the bounds for z) in each region depend on only x (or on only y). Heres the region
projected onto the xy-plane:
.....
.....
.....
y .....
......... .....
.....
.....
.....
..... ...
.
. .
....... y=x
...........................................................................
..... ....
.. .... .....
.. ... .
...
....
........ ...... .. .. ... .......

.... .....
.... .
. .
.... ........
.. ......
..............
............
.............. . . ...
..........
............
..............
........
..
.......................... ..... .....
.................... .. .............................
...
...
... .........................
..
........... . ........... ....... ...
..........................................................................................................................................................................................................
.
.. .. .......
..................... .. .....................
.
................... .. ................... .. x
.................
........
.. .....
....................
. ..... ..... ....
...
.................
...............
.............
...........
.........
.. .... ... . ... ...........
.........

..........................................................................
.... .
. .......
........ ..
. .....
... ..
. ...
. .
. .
...
. .
. .....
... .
. .....
.
...... .
.
. .....
..
.... .
. .....
....
........
y = x .
.
.
.
...
.....
.....
..


On the shaded region
p z variespbetween 1 x2 and 1 x2 , while on the unshaded regions z
varies between 1 y 2 and 1 y 2 . Well integrate over the region R (this is one-quarter of the
volume of the full region). Thus the full volume of the region is
Z Z Z 1x2 Z 1 Z x Z 1x2
16
Volume = 4 1 dz dA = 4 1 dz dy dx = .
1x 2 0 x 1x 2 3
R
Math 21a Final Exam Solutions Spring, 2009
5 (8 points) Suppose the gradient vector of a function f (x, y, z) at the point (3, 4, 5) is h1, 2, 2i.

(a) (2 points) Find the values of the partial derivatives fx , fy , and fz at the point (3, 4, 5).
Solution: Since the gradient vector of a function f (x, y, z) is the vector f = hfx , fy , fz i,
we have that fx = 1, fy = 2, and fz = 2 at the point (3, 4, 5).
(b) (3 points) Find the maximum directional derivative of f at the point (3, 4, 5) and the unit
vector in the direction in which this maximum occurs.
Solution: Recall that the directional derivative Du f = f u is greatest in the direction
f h1,2,2i
of f . Thus the directional derivative is greatest when u = |f | = 3 = h 31 , 23 , 23 i. The
directional derivative in the direction of u is thus Du f = f u = h1, 2, 2i h1,2,2i
3 = 3. (This
is, of course, simply |f |.)
(c) (3 points) If f (3, 4, 5) = 2, estimate f (3.1, 4.1, 4.8) using linear approximation.
Solution: Recall that the linearization L(x, y, z) near (x, y, z) = (a, b, c) of the function
f (x, y, z) is
L(x, y, z) = f (a, b, c) + f (a, b, c) hx a, y b, z ci
or, equivalently,

L(x, y, z) = f (a, b, c) + fx (a, b, c)(x a) + fy (a, b, c)(y b) + fz (a, b, c)(z c).

Here (a, b, c) = (3, 4, 5), f (3, 4, 5) = h1, 2, 2i, and f (3, 4, 5) = 2. Thus

L(x, y, z) = 2 + h1, 2, 2i hx 3, y 4, z + 5i

The linear approximation of f (x, y, z) for (x, y, z) near (3, 4, 5) is simply f (x, y, z) L(x, y, z).
Thus we get

f (3.1, 4.1, 4.8) L(3.1, 4.1, 4.8) = 2 + h1, 2, 2i h3.1 3, 4.1 4, 4.8 + 5i
= 2 + h1, 2, 2i h0.1, 0.1, 0.2i
2 + 0.1 0.2 + 0.4 = 1.7.
Math 21a Final Exam Solutions Spring, 2009
6 (8 points) Let S be the part of the elliptic cylinder 4x2 + 9z 2 = 36 lying between the planes y = 3
and y = 3 and below the plane z = 0. Here are two views of this cylinder, from different perspectives:
z

y x
x

(a) (4 points) Write an iterated integral which gives the surface area of S. You need not
evaluate the integral, but your integral should be simplified enough so that all that is required
is integration (that is, the integrand contains no dot or cross products or even vectors).
Solution: Recall that the scalar surface area element dS is |ru rv | du dv, where r(u, v) is
a parameterization of the surface S. So all we need is a parameterization.
There are several ways to parameterizeDthis. Perhaps the most direct is as a q
graph z = f (x, y).
E
2
We solve for z and find that r(x, y) = x, y, 13 36 4x2 has |rx ry | = 9+3x 9x2
, so
Z 3Z 3 r
9 + 3x2
Surface Area = dy dx.
3 3 9 x2
Note the negative sign in the expression for z and also the general unpleasantness of computing
with this expression.
A nicer expression involves parameterizing the elliptical cylinder using sines and cosines:
r(y, ) = h3 cos(), y, 2 sin()i (with 3 y 3 and 2). From this we get


i j k

ry r = 0 1 0 = h2 cos(), 0, 3 sin()i ,
3 sin() 0 2 cos()
p
and so |ry r | = 9 sin2 () + 4 cos2 (). Thus
Z 2 Z 3 q
Surface Area = 9 sin2 () + 4 cos2 () dy d.
3
ZZ
(b) (4 points) Let F(x, y, z) = hx, ey , zi. Evaluate the flux integral F dS if S is oriented with
S
normal vectors pointing upward (that is, so the normal vectors have positive z component).
Solution: We use the second parameterization from part (a), namely r(y, ) =
h3 cos(), y, 2 sin()i, 2, 3 y 3. From the calculation above, ry r gives
us the wrong orientation (recall that 2, so sin() 0), so we use r ry =
h2 cos(), 0, 3 sin()i instead. Thus
ZZ ZZ
F dS = F(r(y, )) (r ry ) dA
S R
Z 2 Z 3
= h3 cos(), ey , 2 sin()i h2 cos(), 0, 3 sin()i dy d
3
Z 2 Z 3
= 6 dy d = 36.
3
Math 21a Final Exam Solutions Spring, 2009
7 (14 points) Let C be the curve of intersection of the cylinder x2 +y 2 = 4 and the plane 3x+2y+z = 6.
(a) (2 points) Parameterize C. Be sure to give bounds for your parameter.
Solution: This intersection is an ellipse. It is simplest to parameterize by noticing that
its projection into the xy-plane is simply the circle x2 + y 2 = 4. This is parameterized
by x = 2 cos(t) and y = 2 sin(t); the z-coordinate on the ellipse can be found by solving
for z in the plane: z = 6 3x 2y. Thus we end up with the parameterization r(t) =
h2 cos(t), 2 sin(t), 6 6 cos(t) 4 sin(t)i with 0 t < 2.
(b) (3 points) Write an integral that gives the arc length of C. You need not evaluate your
integral, but your integral should be simplified enough so that all that is required is integration
(that is, the integrand contains no dot or cross products or even vectors).
Solution: Recall that the incremental arc length element is ds = |r0 (t)| dt. (If we envision
r(t) as describing the path of a particle, then |r0 (t)| is the speed of this particle while ds
dt is the
rate of change of the distance this particle has traveled. These must agree.) This is simply
Z 2


Arc Length = 2 sin(t), 2 cos(t), 6 sin(t) 4 cos(t) dt
0
Z 2 q
= 4 sin2 (t) + 4 cos2 (t) + 36 sin2 (t) 24 sin(t) cos(t) + 16 cos2 (t) dt
0
Z 2 q
= 40 sin2 (t) 24 sin(t) cos(t) + 20 cos2 (t) dt
0
Z 2 q
= 2 10 sin2 (t) 6 sin(t) cos(t) + 5 cos2 (t) dt.
0

(c) (4 points) A bee is flying along the curve C in a room where the temperature is given by
f (x, y, z) = 5x + 5y + 2z. What is the hottest point the bee will reach?
Solution: Maximize f (r(t)) = 10 cos t + 10 sin t + 12 12 cos t 8 sin t = 12 2 cos t + 2 sin t.
The derivative of this is 2 sin t + 2 cos t, which is 0 when sin t = cos t = 12 . So, the

hottest point is 2, 2, 6 + 2 where f ( 2, 2, 6 + 2) = 12 + 2 2. (The other point,

2, 2, 6 2 where f ( 2, 2, 6 2) = 12 2 2.
Alternatively, use Lagrange multipliers to maximize 5x + 5y + 2z subject to the constraints
x2 + y 2 = 4 and 3x + 2y + z = 6. This gives h5,5, 2i = h2x, 2y, 0i + h3, 2, 1i, so = 2, and
h1, 1, 0i = h2x, 2y, 0i. Therefore, y = x = 2, as before.
D E Z
3
(d) (5 points) Let F(x, y, z) = x2 y, ey xy 2 , cos z 2 . Evaluate the line integral F dr if C is
C
oriented counterclockwise when viewed from above.
Solution: Use Stokes Theorem: let S be the part of the plane 3x + 2y + z = 6
inside the cylinder x2 + y 2 = 4, oriented with upward normals. Parameterize this by
r(x, y) = hx, y, 6 3x 2yi, where the points (x, y) lie in R, the disk x2 + y 2 4. Then
rx ry = h3, 2, 1i (which is the correct orientation for Stokes), and curl F = h0, 0, x2 y 2 i.
Hence
ZZ ZZ
curl F dS = curl F(r(x, y)) (rx ry ) dA
S R
ZZ ZZ
= h0, 0, x2 y 2 i h3, 2, 1i dA = (x2 + y 2 ) dA
R R
Z 2 Z 2
= r2 r dr d = 8
0 0
Math 21a Final Exam Solutions Spring, 2009
y ................
..
...
..
8 (6 points) Evaluate the line integral 4 ..............................
.
.. . . .........
C2 ..................................................................................................... C1
. . .
Z .........................................
.....................................
. .. ..................................................................
(x4 + 3y) dx + (5x y 3 ) dy, . . ..............................................D ................
. . . . . . . ...
.................................................................................................................................................................................................................................................................................................................................................................
. . .
C ..............
...
...................................................................................................... .
x
where C is the boundary of the square with vertices (4, 0), (0, 4), (4, 0), 4 ...................................................................................................................................................... 4
................................................................
and (0, 4), traversed counterclockwise. C3 .................................................................... . C4
.........
4 ........ ...
..

R
Solution: The simplest way to do this is to use Greens Theorem, which says that C P dx+Q dy =
RR
D (Qx Py ) dA, where C is the oriented boundary of the region D. In our case, this means D is
the solid square (as shaded, above), P = x4 + 3y, Q = 5x y 3 , and so Qx Py = 2. Thus
Z ZZ
(x4 + 3y) dx + (5x y 3 ) dy = 2 dA = 2 Area(D).
C D

Since D is a square with side length 4 2, the area of D is 32 and so the line integral is 64.

Another approach is to just compute the line integral directly. Ive added labels to the picture
(above), so the four line segments are now labeled as C1 through C4 . Well do the line integrals
along each curve more or less without comment, starting with a parameterization and proceeding to
the line integral.
Along C1 : Use hx, yi = h4 t, ti (with 0 t 4), so hdx, dyi = hdt, dti and
Z Z 4
4 3 1264
(4 t)4 + 3t (dt) + 5(4 t) t3 dt =
  
(x + 3y) dx + (5x y ) dy = = 252.8.
C1 0 5

Along C2 : Use hx, yi = ht, 4 ti (with 0 t 4), so hdx, dyi = hdt, dti and
Z Z 4
624
(x4 +3y) dx+(5xy 3 ) dy = (t)4 + 3(4 t) (dt)+ 5(t) (4 t)3 (dt) =
  
= 124.8.
C2 0 5

Along C3 : Use hx, yi = ht 4, ti (with 0 t 4), so hdx, dyi = hdt, dti and
Z Z 4
4 3 784
(t 4)4 + 3(t) dt + 5(t 4) (t)3 (dt) =
  
(x + 3y) dx + (5x y ) dy = = 156.8.
C3 0 5

Along C4 : Use hx, yi = ht, t 4i (with 0 t 4), so hdx, dyi = hdt, dti and
Z Z 4
4 3 1424
t4 + 3(t 4) dt + 5t (t 4)3 dt =
  
(x + 3y) dx + (5x y ) dy = = 284.8.
C4 0 5

The total line integral around C is the sum of these four line integrals. That is,
Z
1264 624 784 1424 320
(x4 + 3y) dx + (5x y 3 ) dy = + + 5= = 64,
C 5 5 5 5

as before.
Math 21a Final Exam Solutions Spring, 2009
9 (11 points)

(a) (5 points) Find all critical points of f (x, y) = x2 + y 2 + x2 y + 4, and classify each critical point
as a local minimum, local maximum, or saddle point.
Solution: A critical point of f (x, y) is a point where f = hfx , fy i = h0, 0i. Here
f = h2x + 2xy, 2y + x2 i, so we have 2x(y + 1) = 0 and 2y + x2 = 0. From the first equation,
either x = 0 (and so y = 0 from the second equation) or y = 1 (which means x = 2).
Thus we have three critical points: (x, y) = (0, 0) and ( 2, 1).
To classify these critical points, we use the second derivative test. Using fxx = 2y + 2,
fxy = fyx = 2x, and fyy = 2, we get D = fxx fyy fxy 2 = 4(y + 1) 4x2 . Thus we have

the following classifications:



Critical Point ( 2, 1) (0, 0) ( 2, 1)
D 8 4 8
fxx 0 2 0
Classification Saddle Local Min Saddle
Z
(b) (3 points) Evaluate the line integral F dr, where C be the straight line path from (1, 1)
C
to (2, 2) and F(x, y) is the gradient vector field of f (x, y) (from part (a)).
Solution: We could parameterize the curve C and compute the integral directly (and we do
so below). It is simpler, however, to use the fundamental theorem of line integrals:
Z Z
F dr = f dr = f ( end pt ) f ( start pt ) = f (2, 2) f (1, 1) = 20 7 = 13.
C C

The straightforward-seeming approach is much more complicated. We cab parameterize this


path by r(t) = ht, ti (with 1 t 2). Using this parameterization, our line integral is
Z Z 2
F dr = F(r(t)) r0 (t) dt
C 1
Z 2

2t + 2t2 , 2t + t2 h1, 1i dt

=
1
Z 2
= (4t + 3t2 ) dt = 13.
1

(c) (3 points) Here is the gradient vector field G(x, y) of another function g(x, y). (Dots represent
zero vectors.) Find all critical points of g(x, y) in the region shown, and classify each critical
point as a local minimum, local maximum, or saddle point.
y
Solution: Recall that a critical point of f (x, y) is where
3
f = hfx , fy i = h0, 0i. Thus a critical point is where the
vector appears as a dot, so in this region the critical points
are at (x, y) = (1, 1) and (2, 2).
2
We classify these points using the meaning of the gradient.
Recall that the gradient points in the direction in which f
increases fastest. The point (2, 2) is a minimum because f
1
increases when we move away this point in any direction.
The point (1, 1) is a saddle point because f either increases
or decreases as we move away from the point, depending on
x
the direction. 1 2 3
Math 21a Final Exam Solutions Spring, 2009

z
10 (10 points) The four points (1, 0, 0), (0, 0, 1), (0, 1, 1), and (1, 2, 0)
are all co-planar and form the vertices of a quadrilateral S. Let C be
the boundary of S directed as shown to the right, and let F = yk. H0, 0, 1L
H0, 1, 1L
(a) (4 points) Find the equation of the plane that contains
the quadrilateral S.
Solution: The plane contains the point (0, 0, 1)
y
and is parallel to the vectors h1 0, 0 0, 0 1i and H1, 0, 0L
h0 0, 1 0, 1 1i. Thus the normal is

n = h1, 0, 1i h0, 1, 0i = h1, 0, 1i, x H1, 2, 0L

and the plane is h1, 0, 1i hx 1, y, zi or x + z = 1.

I
(b) (3 points) Calculate F dr.
C
Solution: While we could parameterize the four segments of curve C, it is simpler to
apply Stokes Theorem and compute a flux integral instead. We orient the surface S to be
compatible with the orientation of C (that is, with the downward pointing normals). A simple
parameterization is r(x, y) = hx, y, 1 xi (using the equation of the plane z = 1 x found in
part (a)). Then S is the surface parameterized by r for points (x, y) in the region R, shown
below:
y ..............
....
2 ...
.... .

.... ...
.. ...
... .....
.......
.
.. ... ...
... . .............
............

....
... ..............
... ................
.. ..
... ......................................

.
1 .. .. ... ......................
.. .............
.......................................
... ...............
.......................................
..........................
... R ... .............
.......................................
..........................
... ..........................
.............
.
.......................................
.................................
..........................
.............
......................................................................................................
..
..
... x
1
Then rx ry = h1, 0, 1i is precisely the cross product found in part (a). (Notice this is the
wrong orientation; well use ry rx = h1, 0, 1i instead.) Using curl F = h1, 0, 0i, we get via
Stokes Theorem:
I ZZ ZZ Z 1 Z 1+x
3
F dr = curl F dS = h1, 0, 0i h1, 0, 1i dy dx = 1 dy dx = .
C S R 0 0 2

ZZ
(c) (3 points) Calculate curl F dS.
S
Solution: Weve already computed this integral, assuming that S has the orientation we
gave it in part (b). If S is given the opposite orientation (with upward-pointing normals), this
would simply change the sign of our computation in part (b) and wed get + 32 .
Math 21a Final Exam Solutions Spring, 2009
.....
y ..........
11 (10 points) ...
.... 2 2
...........x.........+
..
...
y =9
..............
ZZ ... ...
... .........
.. ...
... ....
(a) (4 points) Write f (x, y) dA, where D is the region ... ...
... ...
... .....
D .. ...
...
...
shown to the right, as an iterated integral of the form
... ...
... ..
... ...
..
...
...
Z b Z g2 (x) ... ...
....
f (x, y) dy dx. ... ...
...
...

a g1 (x)
...
.. ....
.
...
...
...

... /6.... ...


...

Solution: The line has equation xy = tan( 3 ) = 3 or ....................


... .. ...

... ..... ..
...
.....

y = 3x; this intersects the circle at the point (x, y) = ... .. ..


...
....... ...
...
3 3 3
(3 cos( 3 ), 3 sin( 3 )) = ( 2 , 2 ). Thus the integral can be written ... ...
.
............................................................................................................................................
...
.
as x
ZZ Z Z 3/2 9x2
f (x, y) dA = f (x, y) dy dx.
0 3x
D

ZZ
(b) (4 points) Write f (x, y) dA as an iterated integral using polar coordinates.
D
Solution: The region D can be described in polar coordinates as those points with 0 r 3
and 3 2 . Thus
ZZ Z /2 Z 3
f (x, y) dA = f (r cos(), r sin()) r dr d.
/3 0
D

ZZ
(c) (2 points) Compute cos(x2 + y 2 ) dA.
D
Solution: We use polar coordinates as in part (b). We get
ZZ Z /2 Z 3
2 2
cos(x + y ) dA = cos(r2 ) r dr d
/3 0
D
/2
3 Z /2
sin(r2 )
Z
sin(9)
= d = d
/3 2
0 /3 2
sin(9)  
= = sin(9).
2 2 3 12
Math 21a Final Exam Solutions Spring, 2009
12 (11 points) Let W be the solid tetrahedron with vertices (0, 0, 0), (1, 0, 0), (0, 1, 0), and (0, 0, 1).
This tetrahedron has volume 61 .

(a) (4 points) Let S be the surface that forms the boundary of W , oriented with the outward-
pointing normal. Note that S has four pieces. Compute the flux of the vector field
3
Z Z y, z) = (x 3yz)i + (x + y)j + (tan(xy) + z)k out of the surface S. That is, compute
F(x,
F dS.
S
Solution: We use the Divergence Theorem. There are two hints at why this might be
appropriate. First, computing the flux directly would require that we parameterize each of the
four pieces of S separately. Second, and perhaps even more importantly, the vector field F is
complicated and difficult to involve in an integral, while div F = 3. The Divergence Theorem
implies that
ZZ ZZZ ZZZ
1
F dS = div F dV = 3 dV = 3 Vol(W ) = ,
S W W 2

as were told the volume of W is 61 .


ZZ
(b) (3 points) Compute the flux of curl F out of the surface S; that is, compute curl F dS.
S
Solution: Again we apply the Divergence Theorem. This time its even simpler, as we recall
that div (curl F) = 0 for any vector field F:
ZZ ZZZ ZZZ
curl F dS = div (curl F) dV = 0 dV = 0.
S W W

(c) (4 points) Let S1 be the part of S that lies in the yz-plane (where
Z Z x = 0), oriented in the
same way as S. Find the flux of F through S1 ; that is, compute F dS.
S1
Solution: We parameterize S1 by r(y, z) = h0, y, zi where (y, z) lies in the region R shown
below:
z ...............
...
1 .........................
............................
............................................
........................................................
.......................................................
.................................R . . . . . ....
..............................................................................................................
.....................
.......................................................................................................................................................................................................
...
.... y
.... 1
The normal rz ry = h1, 0, 0i is the proper orientation (outward from W ), so
ZZ ZZ
0 3yz, 03 + y, tan(0y) + z h1, 0, 0i dz dy


F dS =
S1 R
Z 1 Z 1y Z 1
= 3yz dz dy = 3
2 y(y 1)2 dy
0 0 0
Z 1
3 1
y 3 2y 2 + y dy = .

=
2 0 8

You might also like