Professional Documents
Culture Documents
1
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD
IV B .Tech. I Sem., I Mid-Term Examinations, September - 2017
CONTROL THEORY- APPLICATION TO FLIGHT CONTROL SYSTEMS
Objective Exam
Name: ______________________________ Hall Ticket No. A
Answer All Questions. All Questions Carry Equal Marks. Time: 20 Min. Marks: 10.
6. The forward path transfer function of a unit feedback control system is given byG(s) = . steady
state error to unit step input is [ ]
A) 0 B) 1 C) 0.75 D)
7. Transfer function of a simple lead compensator consisting of resistor(R) and capacitor(C) is[ ]
A) s/(1+s) B) 1/(1+s) C)s D) 1/s ; Where = RC
8. The location of the closed- loop conjugate pair of pole on j axis indicates that the system is[ ]
A) Stable B) Unstable C) Marginally Stable D) Critically Stable
12. A stable system may be defined as one that will have a _______________ for all bounded input.
13. Transfer function of a closed loop system with loop gain G(s)H(s) is given by_________________ .
15. When parameters of a linear control system are stationary with respect to time during operation of the
system, the system is called _______________________.
18. Sensor used in aircraft control for altitude hold auto pilot is___________________.
19. Polar (Nyquist) plot of a sinusoidal transfer function G(j) is a plot of the _________________ verses
________________on polar coordinates as is varied from 0 to infinity.
-oOo-
Code No: 117CA Set No. 2
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD
IV B .Tech. I Sem., I Mid-Term Examinations, September - 2017
CONTROL THEORY- APPLICATION TO FLIGHT CONTROL SYSTEMS
Objective Exam
Name: ______________________________ Hall Ticket No. A
Answer All Questions. All Questions Carry Equal Marks. Time: 20 Min. Marks: 10.
3. The forward path transfer function of a unit feedback control system is given byG(s) = . steady
state error to unit step input is [ ]
A) 0 B) 1 C) 0.75 D)
4. Transfer function of a simple lead compensator consisting of resistor(R) and capacitor(C) is[ ]
A) s/(1+s) B) 1/(1+s) C)s D) 1/s ; Where = RC
5. The location of the closed- loop conjugate pair of pole on j axis indicates that the system is[ ]
A) Stable B) Unstable C) Marginally Stable D) Critically Stable
Cont..2
Code No: 117CA :2: Set No. 2
12. When parameters of a linear control system are stationary with respect to time during operation of the
system, the system is called _______________________.
15. Sensor used in aircraft control for altitude hold auto pilot is___________________.
16. Polar (Nyquist) plot of a sinusoidal transfer function G(j) is a plot of the _________________ verses
________________on polar coordinates as is varied from 0 to infinity.
19. A stable system may be defined as one that will have a _______________ for all bounded input.
20. Transfer function of a closed loop system with loop gain G(s)H(s) is given by_________________ .
-oOo-
Code No: 117CA Set No. 3
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD
IV B .Tech. I Sem., I Mid-Term Examinations, September - 2017
CONTROL THEORY- APPLICATION TO FLIGHT CONTROL SYSTEMS
Objective Exam
Name: ______________________________ Hall Ticket No. A
Answer All Questions. All Questions Carry Equal Marks. Time: 20 Min. Marks: 10.
1. The forward path transfer function of a unit feedback control system is given byG(s) = . steady
state error to unit step input is [ ]
A) 0 B) 1 C) 0.75 D)
2. Transfer function of a simple lead compensator consisting of resistor(R) and capacitor(C) is[ ]
A) s/(1+s) B) 1/(1+s) C)s D) 1/s ; Where = RC
3. The location of the closed- loop conjugate pair of pole on j axis indicates that the system is[ ]
A) Stable B) Unstable C) Marginally Stable D) Critically Stable
Cont..2
Code No: 117CA :2: Set No. 3
13. Sensor used in aircraft control for altitude hold auto pilot is___________________.
14. Polar (Nyquist) plot of a sinusoidal transfer function G(j) is a plot of the _________________ verses
________________on polar coordinates as is varied from 0 to infinity.
17. A stable system may be defined as one that will have a _______________ for all bounded input.
18. Transfer function of a closed loop system with loop gain G(s)H(s) is given by_________________ .
20. When parameters of a linear control system are stationary with respect to time during operation of the
system, the system is called _______________________.
-oOo-
Code No: 117CA Set No. 4
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD
IV B .Tech. I Sem., I Mid-Term Examinations, September - 2017
CONTROL THEORY- APPLICATION TO FLIGHT CONTROL SYSTEMS
Objective Exam
Name: ______________________________ Hall Ticket No. A
Answer All Questions. All Questions Carry Equal Marks. Time: 20 Min. Marks: 10.
1. The location of the closed- loop conjugate pair of pole on j axis indicates that the system is[ ]
A) Stable B) Unstable C) Marginally Stable D) Critically Stable
9. The forward path transfer function of a unit feedback control system is given byG(s) = . steady
state error to unit step input is [ ]
A) 0 B) 1 C) 0.75 D)
10. Transfer function of a simple lead compensator consisting of resistor(R) and capacitor(C) is[ ]
A) s/(1+s) B) 1/(1+s) C)s D) 1/s ; Where = RC
Cont..2
Code No: 117CA :2: Set No. 4
11. Sensor used in aircraft control for altitude hold auto pilot is___________________.
12. Polar (Nyquist) plot of a sinusoidal transfer function G(j) is a plot of the _________________ verses
________________on polar coordinates as is varied from 0 to infinity.
15. A stable system may be defined as one that will have a _______________ for all bounded input.
16. Transfer function of a closed loop system with loop gain G(s)H(s) is given by_________________ .
18. When parameters of a linear control system are stationary with respect to time during operation of the
system, the system is called _______________________.
-oOo-