Professional Documents
Culture Documents
PRODUCT INFORMATION
Chemical Base Portland cement
Packaging 25 kg sizes paper bag
Appearance / Colour Powder / White, Grey
Shelf Life 12 months if stored in closed bag in a dry room.
Storage Conditions Store in room and keep it dry. Avoid excessive stacking, maximum 8 stacks
for each pallet (maximum stack of pallet 2 )
Density Dry : 1.2 kg/L Wet : 1.8 kg/L (ASTM C 185)
APPLICATION INFORMATION
Mixing Ratio 7.8 8.0 L / 25 kg bag
Consumption 12 m / 25 kg bag / 2 mm thickness, depend on surface base contour.
Layer Thickness 1.5 3 mm (max. thickness 3 mm)
1/2
APPLICATION INSTRUCTIONS ECOLOGY, HEALTH AND SAFETY
For information and advice on the safe handling, stor-
SUBSTRATE QUALITY / PRE-TREATMENT
age and disposal of chemical products, users shall refer
1. Prepare working place and surface. to the most recent Safety Data Sheet (SDS) containing
2. Clean surface base from chips, dirt and oil that can physical, ecological, toxicological and other safety-re-
reduce adhesiveness of coating mix lated data.
3. Wet the working surface base with water if it too
dry. LEGAL NOTES
MIXING The information, and, in particular, the recommenda-
tions relating to the application and end-use of Sika
Manual : products, are given in good faith based on Sika's cur-
1. Add water in amount of 7.8 8.0 liter into the mix- rent knowledge and experience of the products when
ing container for a bag of Sika Skim Coat (25 kg) properly stored, handled and applied under normal
2. Put Sika Skim Coat dry powder into mixing contain- conditions in accordance with Sika's recommenda-
er. tions. In practice, the differences in materials, sub-
3. Mix the powder and water to farm an even mixture. strates and actual site conditions are such that no war-
ranty in respect of merchantability or of fitness for a
APPLICATION particular purpose, nor any liability arising out of any
legal relationship whatsoever, can be inferred either
1. Finish coating is manually done as usual and then
from this information, or from any written recom-
spread evenly long with ruler.
mendations, or from any other advice offered. The
2. Recommended coating thickness is 2 mm, depend
user of the product must test the products suitability
on surface base contour.
for the intended application and purpose. Sika re-
serves the right to change the properties of its
BASIS OF PRODUCT DATA products. The proprietary rights of third parties must
All technical data stated in this Product Data Sheet are be observed. All orders are accepted subject to our
based on laboratory tests. Actual measured data may current terms of sale and delivery. Users must always
vary due to circumstances beyond our control. refer to the most recent issue of the local Product Data
Sheet for the product concerned, copies of which will
be supplied on request.
LOCAL RESTRICTIONS
Please note that as a result of specific local regula-
tions the declared data and recommended uses for
this product may vary from country to country. Please
consult the local Product Data Sheet for the exact
product data and uses.
2/2