The AMDR-1011 is a microwave motion sensor that uses Doppler radar to detect movement. It operates at 10.525GHz and has a range of 10-14dBm output power. The sensor is 55x49x12.5mm in size, operates from -20 to 55°C, and can be used to detect motion for applications like intrusion alarms, automatic doors, and obstruction warnings.
The AMDR-1011 is a microwave motion sensor that uses Doppler radar to detect movement. It operates at 10.525GHz and has a range of 10-14dBm output power. The sensor is 55x49x12.5mm in size, operates from -20 to 55°C, and can be used to detect motion for applications like intrusion alarms, automatic doors, and obstruction warnings.
The AMDR-1011 is a microwave motion sensor that uses Doppler radar to detect movement. It operates at 10.525GHz and has a range of 10-14dBm output power. The sensor is 55x49x12.5mm in size, operates from -20 to 55°C, and can be used to detect motion for applications like intrusion alarms, automatic doors, and obstruction warnings.
Power Output 10 12 14 dbm Operating Voltage 4.75 5 5.25 V Operating Current 30 50 65 mA cw Sensitivity (10dB S/N ratio) i -85 dbm 3Hz to 80Hz Noise 10 V 3Hz to 80Hz Antenna Gain 8 db Size 55x49x12.5 mm
Power/Temp. Coefficient 3 dbm over operating
Operating Temperature Range -20 to +55 Storage Temperature Range -30 to +70 Pulse Operation: Average Current @5% Duty Cycle 2 mA Pulse Width 5sec. Min. Duty Cycle 1% min. FCC PART 15 Compliant Note:Product specification are subjected to change without notice.
48 6
6F, 48,KEELUNG ROAD, SEC. 2, TAIPEI 110, TAIWAN, R.O.C.
TEL: 886-2-2758-6958FAX:886-2-2758-6987EMAIL: ameleks@ameleks.comWEBSITE: http://www.ameleks.com AMDR-1011 Microwave Motion Sensor PRODUCT FEATURES Doppler radar theory is applied in this reliable, low-cost Microwave Motion Sensor, AMDR-1011 Basically, the Doppler effect describes the shift in frequency of a signal reflected from a moving target. The Doppler frequency is defined as the difference between the frequency of the transmitted signal and the frequency of the return signal. Microwave Motion Sensor is used to measure the relative velocity of a moving target in the applications such as intrusion alarms.
Microwave Motion Sensor offers a number of advantages over alternative technologies
such as ultrasonic, optic, magnetic switch, or infrared sensors in the senses of greater range, better penetration, etc.
APPLICATION Intrusion Alarms Automatic Door Openers Obstruction Warning Systems Non-Contact Measurement
SCHEMATIC
48 6
6F, 48,KEELUNG ROAD, SEC. 2, TAIPEI 110, TAIWAN, R.O.C.