Professional Documents
Culture Documents
The Flight Shops professional sales staff can help you identify the
fastener thats just right for your specific application.
1
Table of Contents
Pg.
Ordering Information
You may place an order online at www.theflightshop.com, email sales@theflightshop.com, call 435-723-3469 or fax 435-723-1736. All fasteners
including adhesives are sold individually except when ordered in a kit. No minimum order required. Prices and immediate availability are subject
to change without prior notice. Extended lead times may apply on some special order items.
Payment Terms
The Flight Shop offers various payment terms including COD, credit card, wire transfer or Net 30 days from date of invoice for established companies
who have arranged with The Flight Shop for open account status. Companies on Net 30 days who fall delinquent past 60 days will automatically revert
to COD or Credit Card status.
Certificate of Conformance
The Flight Shop, Inc. provides you with company Certificate of Conformance that appears on every invoice as well as the manufacturers Certificate of
Conformance at no charge. Test reports are available on some items at an additional cost of $25-$150 per line item. Please inquire at the time of
ordering whether test reports are available on the item you are requesting.
Back Orders
Although our inventory is quite extensive and we try to make every effort to ship your order complete it may be sometimes necessary to back order
one or more items. If a partial order is shipped you are charged only for those items shipped. If a back order is necessary we do appreciate your
patience.
Products normally in stock may not be returned without prior authorization. Returns are subject to a 20% restocking charge, must have been
purchased from The Flight Shop and returned within 30 days from date of purchase. Some special ordered items may be rejected for return due to
there uniqueness. Your account will be credited (minus any restocking charge that may apply) after we receive the returned items and we do not
refund any shipping cost.
Limitation of Liability
These materials are provided AS IS without any express or implied warranty of any kind including warranties of merchantability, or fitness for any
particular purpose. In no event shall The Flight Shop or Click Bond be liable for any damages whatsoever (including, without limitation, damages for
loss of profits, business interruption, loss of information) arising out of the use of or inability to use the materials, even if The Flight Shop or Click Bond
have been advised of the possibility of such damages. Because some jurisdictions prohibit the exclusion or limitation of liability for consequential or
incidental damages, the above limitation may not apply to you.
Warranty
The Flight Shop, Inc. and Click Bond do not warrant the accuracy or completeness of the information, text, graphics or other items contained within
this catalog. Click Bond may make changes to the materials, or to the products described therein, at any time without notice. The Flight Shop and
Click Bond make no commitment to update the materials.
All trademarks, product names, logos, brands, graphics and data identifying Click Bond products and services are proprietary trademarks, service
marks and/or registered trademarks of Click Bond, Inc. and may not be used without prior written consent. All other brand and product names are the
trademarks or registered trademarks of their respective holder.
2
TYPICAL CLICK BOND ADHESIVE STRENGTH DATA
The following adhesive strength data represents the values obtained when using CB200 adhesive to bond
Click Bond fasteners to various substrates requested by customers. Please call The Flight Shop if you
have a question regarding an adhesive bonded fastener in which you are interested.
3
TYPICAL CLICK BOND ADHESIVE
3 STRENGTH DATA
Adhesive joint strength is fundamental to the attachment strength of an adhesive bonded fastener. The
adhesive bond strength is a function of a number of variables: the strength of the fastener, the surface area of
the fastener, the fastener material and finish, the adhesive selected, the thoroughness of the adhesive mixing,
the time elapsed between adhesive mixing and application to the bond surfaces, the temperature during
adhesive cure, the application of constant pressure (fixturing) during adhesive cure, the surface preparation of
the substrate the substrate material and finish, and the thickness of the substrate. The key to consistent
adhesive bonding is controlling the process. (Click Bond Process Specification CBPS206 outlines the
recommended materials and process for adhesive bonded fasteners.)
Other design factors include the environment (temperature, humidity, etc.) the joint will be exposed to, the
type of loading (tension, shear, torque, vibration, etc.), the maximum load, the desired safety factor, the weight
of the fastener, and the labor cost for installation.
4
ADHESIVE AND DISPENSERS
Click Bond packages a selection of leading structural adhesives in convenient twin-pack cartridges. Using
this dispensing method in conjunction with static mixers simplifies adhesive preparation while eliminating
component ratio errors associated with hand mixing.
Suitable adhesives are available for bonding of nearly any substrate material. Solutions for high
temperature applications and particular environmental requirements including fuel and fluids immersion
and low outgas are available.
Click Bonds application engineers can assist with selection of the optimal adhesive product to meet your
bonded fastener requirements. Extensive test data demonstrating bond strength to a wide variety of
substrates, with environmental conditioning, is available from Click Bonds technical library.
5
ADHESIVE DATA REFERENCE CHART
Handling
30 Min. 30 Min. 16 Hrs. 24 Hrs. 8 Hrs.
Strength
Room
Temp.
90% Strength 2 Hrs. 2 Hrs. - - -
72F/22C
Full Strength 24 Hrs. 24 Hrs. 48 Hrs. 5-7 Days 3-5 Days
Shear
ASTM D1002 4700 3500 3553 4500 4200
(psi)
Strength
T Peel
ASTM D1876 12 37 2.2 60 5
(pli)
Room Temp.
6 Months 2 Months 1 Year 6 Months 1 Year
72F/22C
Shelf Life Refrig.
32F to 50F 1 Year 6 Months - 1 Year 1 Year
0C to 10C
6
CB200 ACRYLIC CB200 ACRYLIC
STRUCTURAL ADHESIVE STRUCTURAL ADHESIVE
PRODUCT DESCRIPTION
CB200 acrylic structural adhesive is a two part thixotropic paste adhesive which bonds a wide variety of
prepared or unprepared metals and engineering plastics. It cures quickly at room temperature and exhibits
excellent environmental and chemical resistance. CB200 replaces welding, riveting, and other mechanical
fastening methods and is recommended for bonding Click Bond adhesive bonded fasteners.
PRODUCT FEATURES
UNCURED PROPERTIES
Appearance: Part A: off-white to yellow liquid Cure time at 75F(24C): 30 minutes - handling strength.
Part B: off-white liquid 2 hours - 90% of ultimate strength.
24 hours - full cure.
Mix Ratio: (B:A): 8:1 (volume), 7:1 (weight) Working time at 75F(24C): 5 minutes (small
quantities).
CURED PROPERTIES
Shear Strength: Peel Strength: Impact Strength:
Service Temperature Range:
(ASTM D1002) (ASTM D1876) (ASTM D950)
4700 psi 12pli 9 ft-lb/in -67 to 250
(32.4 MPa) (2.10kN/m) (18.9 kJ/m) (-55C to 121C)
SURFACE PREPARATION
Surface preparation is an important part of adhesive bonding. Lightly abrade glossy surfaces to improve the
adhesive bond. Just prior to adhesive application, clean surfaces with solvent using clean rags or paper towels.
Do not use shop towels, rags or paper wipes contaminated with oil, soap, or reclaimed solvents. Wash one
small area at a time, then dry with a clean cloth before the solvent evaporates to prevent re-deposition of
contaminants. To maintain a clean solvent supply, always pour the solvent on the washing cloth.
MIXING AND APPLYING ADHESIVE
Dispense eight parts of component B and one part of component A (by volume). Mix until a uniform color is
obtained (or use a disposable mixing nozzle). Apply to one of the surfaces to be bonded. To assure maximum
bond strength, surfaces must be mated within 2 minutes. Use sufficient material to insure 100% joint fill when
parts are mated. All adhesive application, part positioning, and clamping should occur before the 5 minutes
working time of the mix has expired. Movement of the parts after working time has expired can result in bond
strengths lower than normal. Insure that the assembly remains undisturbed for 30 minutes to allow adhesive
cure to progress to the handling strength stage where the fixtures or clamps may be removed.
7
CB200 ADHESIVE PACKAGING - 3.5 gm FOIL PACKS
3.5 gram (.12 ounce) foil packs contain a pre-proportioned quantity of
adhesive. Tear end of package to release adhesive. Mix contents on flat
non-porous surface before applying to fastener. A 3.5 gram (.12 ounce)
foil pack contains enough adhesive to install 4 - 5 fasteners with a 1.25
inch (31.8mm) diameter baseplate or 6 - 8 nutplates or .62 inch (15.8 mm)
diameter baseplate fasteners.
CB200-40 ADHESIVE PACKAGING - 40 ml CARTRIDGES
Standard 40 ml (1.35 ounce) dual pack syringe cartridges improve efficiency by
reducing installation time. Click Bond dispensing tools with static mixing tips
provide quick and accurate mixing and application of CB200 adhesive.
8
CB359 EPOXY CB359 EPOXY
STRUCTURAL ADHESIVE STRUCTURAL ADHESIVE
PRODUCT DESCRIPTION
CB359 is a two component structural adhesive which exhibits high peel and high tensile lap shear strength.
This adhesive has excellent resistance to water, salt spray, and most organic fluids. A variety of substrates
such as metals, thermoplastics, and composites may be bonded using CB359 structural adhesive. CB359 is
offered in a two:one cartridge with a static mixer.
PRODUCT FEATURES
High shear strength High peel strength
AEROSPACE SPECIFICATIONS Non sag Easy mix
Bondline thickness Good environmental resistance
Boeing-DPM3279-5
UNCURED PROPERTIES
Appearance: Part A: Yellow Cure time at 75F: 24 hours -handling strength.
Part B: Blue 5-7 days-full cure.
Accelerated cure: 1 hour (180F)-full cure.
Mix Ratio:2:1 (A:B) by volume.
Working time at 75F: 60 minutes (small quantities).
CURED PROPERTIES
Shear Strength: Peel Strength: Compressive Strength: Service Temperature Range:
(ASTM D1002) (ASTM D1876) (ASTM D695)
4500 psi 60 pli 7700 psi -67F to 200F
9
PACKAGING - 50 ml CARTRIDGES
Before using this product, read the Material Data Sheets carefully. For industrial use only.
GENERAL:
Use this product with adequate ventilation. Do not get in eyes or on skin. Avoid breathing the vapors. Wash
thoroughly with soap and water after handling. Empty containers retain product residue and vapors so obey all
precautions when handling empty containers.
PART A
WARNING! As with most epoxy adhesives, the uncured adhesive may cause eye and skin irritations such as
allergic dermatitis. Contains epoxy resins.
PART B
DANGER! Causes sever skin and eye burns. Do not get in eyes, on skin or on clothes. Vapors may be
irritating to the respiratory tract.
For complete cautionary information refer to the Material Safety Data Sheet (MSDS). Copies are available
from The Flight Shop. Values stated in this bulletin represent typical values as not all tests are run on each lot
of material produced. For formalized product specification for specific product end uses, contact the Customer
Service Department. Information provided herein is based upon tests believed to be reliable. Inasmuch as
Click Bond or The Flight Shop have no control over the exact manner in which others may use this
information, it does not guarantee the results to be obtained. Nor does the Companies make any expressed or
implied warranty of merchantability, or fitness for a particular purpose concerning the effects or results of such
use.
10
INSTALLATION SEQUENCE FOR
BONDED NUTPLATES
11
INSTALLATION SEQUENCE FOR
STUDS, STANDOFFS, AND MOUNTS
12
INSTALLATION SEQUENCE FOR
NUTPLATE AND CABLE TIE STANDOFFS
ADHESIVE DISPENSER
13
REMOVAL SEQUENCE
14
QUICK REFERENCE SECTION
(Product with pricing)
Our inventory is continually growing. If you dont see listed in this catalog a size or material you require
please contact our sales department at 453-723-3469 to check current availability.
Definition
Threaded CN, CS#s manufactured using UNF or UNC-2A and 2B Class thread, shipments
come with manufacturers Certificate of Conformance.
Threaded CB#s manufactured using UNF or UNC-3A and 3B Class thread, shipments come
with manufacturers Certificate of Conformance and full traceability upon request.
15
ADHESIVE
Acrylic Adhesive
CB200-40 $14.00
40ml. dual *cartridge
Epoxy Adhesive
CB359-50 $22.25
50ml. dual *cartridge
Manual dispenser
CB100-81 $45.00
(fits CB200-40 cartridge)
Manual dispenser
CB100-21 $41.00
(fits CB359-50 cartridge)
Hazardous material shipping charges may apply on some adhesives. Adhesives cannot ship via the USPS.
*Cartridges require a dispenser either manual or pneumatic and mixing tips. Contact a sales representative at
435-723-3469 for the availability of a higher temperature adhesive not listed.
16
NUTPLATE, MINIATURE, FLOATING
Part Number Thread Size, Material Price
CN614CR04P 4/40 stainless steel/primed $2.20
CN614CR06P 6/32 stainless steel/primed $2.10
CN614CR08P 8/32 stainless steel/primed $2.05
CN614CR3P 10/32 stainless steel/primed $2.00
CN614CR4P 1/4-28 stainless steel/primed $2.34
CN614CR5P 5/16-24 stainless steel/primed $7.65
Bonded nutplates dont require any special tooling to install and eliminates two thirds of the Disposable elastic
holes in the structure by eliminating the attachment rivets normally required for nutplate fixture holds
nutplate while
installation. This nutplate can be ordered in metric sizes contact a sales representative for
adhesive cures.
more information. Detailed drawing on page 38.
INSTALLATION EXAMPLES
17
NUTPLATE, TWO LUG, ADHESIVE BONDED
Part Number Thread Size, Material Price
CN609CR08P 8/32 stainless steel/primed $2.25
CN609CR3P 10/32 stainless steel/primed $2.25
CN609CR4P 1/4-28 stainless steel/primed $3.14
CN609 nutplate has a removable clip for nut replacement and can be ordered in sizes
ranging from 8/32 to 5/16-18 with a nut and baseplate material of A-286 CRES. Disposable elastic
This CN609 nutplate can be ordered in metric sizes. Detailed drawing on page 40. fixture holds nutplate
while adhesive cures.
INSTALLATION EXAMPLES
18
NUTPLATE, FLOATING, SEALED
Dome nutplates work well in fuel tanks and with antenna installations. Contact a sales Disposable elastic
representative for information on other styles of dome nutplates including UNF-3A thread, fixture holds
nutplate while
low profile, one lug, insulated among others. Detailed drawing on page 43. adhesive cures.
INSTALLATION EXAMPLES
CB2031 a low profile dome nutplate can be specially ordered with an optional topcoat
on the dome. This nutplate can also be ordered with an anodized Disposable elastic
aluminum washer or with a cad plated nut. Detailed drawing on page 44. Fixture holds nutplate
while adhesive cures.
DOME NUTPLATE,
MINIATURE, FLOATING, TWO LUG
Part Number Thread Size/Material Price
CB9176CR08CRP 8/32 stainless steel $7.80
This low profile dome nutplate with a larger stem accommodates oversized holes and was
specifically designed as a replacement for nutserts. Detailed drawing on page 45.
Disposable elastic
Fixture holds nutplate
(See pg. 15 for classification of CN and CB#s) while adhesive cures.
19
STUD, SMALL BASE
Part Number Thread Size/Length/Material Price
CS62-440-4CR 4/40-1/4 long/stainless steel $.70
CS62-440-8CR 4/40-1/2 long/stainless steel $.70
Small base studs are especially helpful when mounting very small components. Lengths vary from .25" to 1.5"
with a base diameter of .62". This CS62 can be ordered in metric sizes. Contact a sales representative for the
part number of a small base stud available in composite material if required. Detailed drawing on page 46.
INSTALLATION EXAMPLES
20
STUD, ADHESIVE BONDED
Thread Size/Stud Length
Part Number Price
/Stainless Steel Base Material
CS125-632-4CR 6/32-1/4" long/stainless steel $1.50
21
STUD, ADHESIVE BONDED-continued
Thread Size/Stud Length
Part Number Price
/Composite Base Material
CS125-632-12GCR 6/32-3/4" long/composite base $3.71
CS125 stud has a 1.25" diameter base with lengths varying from .25-1.50". Optional baseplate materials
include aluminum or composite. Contact a sales representative for the part number of UNF or UNC-3A class
thread stud. Detailed drawing on page 47.
INSTALLATION EXAMPLES
22
STUD, VERY LARGE BASE
Part Number Thread/Length Price
CS200-1032-8CR 10/32-1/2" long $2.25
CS200-1032-12CR 10/32-3/4" long $2.25
CS200-1032-16CR 10/32-1" long $2.25
CS200-1420-8CR 1/4-20-1/2" long $2.25
CS200-1420-10CR 1/4-20-5/8" long $2.25
CS200-1420-12CR 1/4-20-3/4" long $2.25
CS200-1420-24CR 1/4-20-1.5" long $2.80 Disposable pressure
sensitive adhesive
CS200-1420-32CR 1/4-20-2" long $5.50 fixture holds stud
while adhesive cures.
CS200-1420-40CR 1/4-20-2.5" long $5.50
CS200-1428-8CR 1/4-28-1/2" long $2.25
CS200-1428-12CR 1/4-28-3/4" long $2.25
CS200-1428-16CR 1/4-28-1" long $2.25
CS200-3816-16CR 3/8-16-1" long $5.50
CS200-3816-24CR 3/8-16-1.5" long $5.50
CS200-51618-16CR 5/16-18-1" long $4.05
CS200-51618-24CR 5/16-18-1.5" long $2.80
Large base studs have a 2" diameter base and come in lengths from .375" to 2.50". Bonded
studs reduce installation costs, prevent leaks, eliminate corrosion and fatigue and reinforce the
attachment areas. Stud base when bonded has incredible holding capabilities see strength data
on page 3 for more information. This stud can be ordered with a composite base material.
Detailed drawing on page 48.
INSTALLATION EXAMPLE
23
STANDOFF, SMALL BASE
Part Number Thread Size, Material Price
CN62-440-5CR 4/40-5/16" stainless steel $1.10
CN62-440-6CR 4/40-3/8" stainless steel $1.13
CN62-440-8CR 4/40-1/2" stainless steel $1.20
CN62-440-10CR 4/40-5/8" stainless steel $1.29
CN62-440-12CR 4/40-3/4" stainless steel $1.37
CN62-632-8CR 6/32-1/2" stainless steel $1.20
Disposable
pressure sensitive
CN62-632-10CR 6/32-5/8" stainless steel $1.29 adhesive fixture
holds standoff
CN62-632-12CR 6/32-3/4" stainless steel $1.37 while adhesive
cures.
CN62-632-13CR 6/32-13/16 stainless steel $1.40
CN62-632-14CR 6/32-7/8 stainless steel $1.43
CN62-832-8CR 8/32-1/2" stainless steel $1.20
CN62-832-10CR 8/32-5/8" stainless steel $1.29
CN62-832-12CR 8/32-3/4 stainless steel $1.20
CN62-1032-8CR 10/32-1/2 stainless steel $1.20
Small base standoffs have a base diameter of .62" and are internally threaded. Thread sizes
range from 440 up to 10/32 with lengths from .312" to 1.062". If a standoff with locking threads
is required contact a sales representative at 435-723-3469 for those part numbers. See page 25
for a larger base standoff. Detailed drawing on page 49.
INSTALLATION EXAMPLES
24
STANDOFF, THREADED
Part Number Thread size/Length/
Price
Stainless Steel Base Material
CN125-632-8CR 6/32-1/2" long/stainless steel $1.76
CN125-632-12CR 6/32-3/4" long/stainless steel $1.93
CN125-632-16CR 6/32-1" long/stainless steel $2.08
CN125-832-5CR 8/32-5/16" long/stainless steel $1.65
Thread size/Length/
Part Number Price
Composite Base Material
CN125-832-8GCR 8/32-1/2" long/composite base $3.94
CN125-1032-8GCR 10/32-1/2" long/composite base $3.94
CN125-1032-12GCR 10/32-3/4" long/composite base $3.69
CN125-1032-16GCR 10/32-1" long/composite base $3.69
CN125 standoff has a 1.25" diameter base with lengths varying from .312" to 1.062" and
thread sizes from 4/40 to 1/4-20. This standoff can be ordered with a stainless steel,
aluminum or composite base. Detailed drawing on page 50.
INSTALLATION EXAMPLES
25
CABLE TIE, SIZE 3
Part Number Material Price
CB9459P3 PEEK $1.25
INSTALLATION EXAMPLES
Tie straps are also manufactured using PEEK material and can be ordered in lengths ranging from a
minimum of 8" to a maximum of 1500" with a minimum locking strength of 35 lbs. Ideal for industries
such as Oil Drilling, Aerospace, Electronics, Automotive, Chemical Processing and Military and Defense
because of its outstanding mechanical properties and resistance to chemicals, abrasion and radiation.
Detailed drawing on page 52.
26
MOUNT, CABLE TIE ANCHOR
Part Number Material Price
CB9120V5 Glass/Thermoplastic $1.25
Low profile to accommodate every application, fast and simple way to secure items with tie
wraps to any surface at any angle. Mounts have incredible holding capabilities. No holes
required for installation. Detailed drawing on page 53.
Disposable pressure
sensitive adhesive
fixture holds mount
while adhesive cures.
INSTALLATION EXAMPLES
Transverse base has a horizontal bind. Made of high temp glass/thermoplastic material
this is a fast and simple way to secure wiring using standard tie wraps to any surface at
any angle. Detailed drawing on page 54.
Disposable pressure
sensitive adhesive
fixture holds mount
while adhesive cures.
INSTALLATION EXAMPLES
27
MOUNT, CABLE TIE ANCHOR, SIZE 3
Part Number Material Price
CB9302V3 Glass/Thermoplastic $1.25
Small in size, low profile easy way to secure or hide one or two small wires using
standard tie wraps. No holes required for installation. Detailed drawing on page 55.
INSTALLATION EXAMPLES
Cable tie tree made of high temperature material enables you to secure up to 5
lines using standard tie warps, with an over all height of 4.68 inches. Tree may be Disposable pressure sensitive
ordered or cut to desired height. Detailed drawing on page 56. adhesive fixture holds cable tie
tree while adhesive cures.
INSTALLATION EXAMPLES
28
SWIVEL MOUNT, CABLE TIE
Part Number Description Price
CB3019AA3N Anodized Aluminum-360 Swivel Mount $1.75
CB3019 listed have aluminum baseplates, other baseplates available include stainless
steel or titanium. Standard base size is 1.25" in diameter but an optional trimmed base
size of .75 can be special ordered. Detailed drawing on page 57.
Disposable pressure
sensitive adhesive
fixture holds mount
while adhesive cures.
INSTALLATION EXAMPLES
With a composite base this CB4019 can secure items using standard tie wraps. The
composite base mount can be ordered with an optional trimmed base. Saddle materials
come in Nylon, Peek, Tefzel, Polyetherimide or Carbon/PEI. Detailed drawing on
page 58. Disposable pressure
sensitive adhesive
fixture holds mount
while adhesive cures.
29
MOUNT, CABLE TIE, RIGHT ANGLE, COMPOSITE
INSTALLATION EXAMPLES
INSTALLATION EXAMPLES
30
MOUNT, CABLE TIE, STANDOFF, COMPOSITE
Part Number Base Material/Height Price
CB4021V3N8 Glass/PEI-1/2" tall $6.00
CB4021V3N12 Glass/PEI-3/4" tall $6.10
CB4021V3N16 Glass/PEI-1" tall $6.20
This cable tie standoff uses standard tie wraps and is ideal when additional height
Disposable pressure
is needed to secure wire bundles while clearing other structural components. sensitive adhesive
Available in heights ranging from .500 to 2.00. Detailed drawing on page 63-64. fixture holds mount
while adhesive
cures.
INSTALLATION EXAMPLES:
INSTALLATION EXAMPLES:
Disposable pressure
sensitive adhesive fixture
holds nutplate while
31
adhesive cures.
CLICK PATCH
Part Number Description Price
Click patches are a simple, clean way to seal leaking flush or protruding fasteners or structures. Place patch
over the leak with holding fixture (included) until adhesive cures, then peel off holding fixture and discard.
Adhesive will cure in the presence of fuel and the patch can be painted to match existing surface. Flat patchs
can also be ordered in Fiberglass, Nylon reinforced rubber, Stainless steel, Titanium or Graphite/Epoxy. Any
patch can be ordered in kit form for quick field repairs. Detailed drawing on page 67.
32
GROMMET, 100 TENSION HEAD
Part Number Material/Size Price
CG596C55 stainless steel/ for #8 screw $1.40
CG596C06 stainless steel/for #10 screw $1.50
CG596C08 stainless steel/for #1/4 screw $1.60
CG596C10 stainless steel/for #5/16 screw $1.70
CG596C12 stainless steel/for #3/8 screw $1.80
Grommets are available for fastener sizes from .1640 to .3750 and may be used to repair
damaged countersunk holes or for installation on fiberglass or composite materials to protect
the surface. Detailed drawing on page 69.
Disposable fixture
holds grommet in
position while
adhesive cures.
INSTALLATION EXAMPLES
This retainer is part of the installation device, used when the grip
is larger on the grommet than the material.
CB5906 sleeve allows for varying lengths and fastener diameter sizes including #8,
10, 1/4, 5/16 3/8 and surface finishes including powder blast, cad plated, epoxy
primer or aluminum coat. Detailed drawing on page 70.
Disposable elastic
fixture holds sleeve
while adhesive
cures.
33
BUSHING, THREADED
Part Number Thread/Material/Length Price
CB9029AA3-500 10/32 Anodized-Aluminum .500 long $6.75
CB9029AA3-813 10/32 Anodized-Aluminum .813 long $6.75
CB9029A3-375 10/32 Aluminum .375 long $6.75
This threaded bushing can be ordered in various thread sizes, base materials and
grip lengths. Click Bond has designed many other styles of bushings that maybe
more suited for your specific application call a sales representative today if you Disposable pressure sensitive
adhesive fixture holds bushing
dont see what will work for you here. Detailed drawing on page 71.
while adhesive cures.
34
RECEPTACLE, QUARTER TURN FASTENER, COMPOSITE
This lightweight quarter turn receptacle being bonded on instead of riveted on as Disposable elastic
with standard receptacles will preserve the structural integrity of the material by fixture holds
receptacle while
reducing 2/3 of the holes required for installation. Fits 2600/2700 series studs. adhesive cures.
Detailed drawing on page 73.
INSTALLATION EXAMPLE
CS120 pin comes in lengths from .50" to 3.50" with baseplate material in aluminum
or stainless steel. This is a good alternative for use in the commercial industry for
the installation of insulation. The pin can be bent over to better secure your product Part supplied mounted in
or an optional retainer can be used to hold insulation in place. Detailed drawing on a disposable pressure
sensitive adhesive fixture
page 74. for attachment. during
bonding.
INSTALLATION EXAMPLES
35
RECEPTACLE, INSULATION BLANKET MOUNT
Part Number Material/Height Price
CB9173V3-12S Ultem Thermoplastic-3/4" tall $1.10
CB9173V3-24S Ultem Thermoplastic-1 1/2" tall $1.25
A simple installation of the blanket mount to the bulkhead or skin allows insulation to
be placed against the self-piercing receptacle which can help speed up your installation.
By removing the spear and installing the removable retainer insulation can be removed
and replaced for inspection without any damage. Detailed drawing on page 75.
INSTALLATION EXAMPLES
The threaded retainer is placed in the receptacle after the spear is removed as shown
above. Detailed drawing on page 76.
36
DETAILED DRAWING SECTION
(Product design drawings)
Definitions
Threaded CN, CS#s manufactured using UNF or UNC-2A and 2B Class thread, shipments
come with manufacturers Certificate of Conformance.
Threaded CB#s manufactured using UNF or UNC-3A and 3B Class thread, shipments come
with manufacturers Certificate of Conformance and full traceability upon request.
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76