You are on page 1of 1

Plate Heat Exchanger

Technical Specification
Model: M15-MFG

Hot Side Cold Side


Fluid Vinasse (dest.) Molasses
Density kg/m3 1100 986.70
Specific Heat Capacity kJ/(kg*K) 3.78 3.79
Heat conductivity W/(m*K) 0.490 0.657
Inlet viscosity cP 38.0 12.3
Outlet viscosity cP 38.0 11.5

Flow rate volume m3/h 150.0 130.0


Inlet temperature C 105.0 50.0
Outlet temperature C 73.3 90.0
Charge loss kPa 167 84.7

Exchange heat kW 5498


L.M.T.D. K 18.8
Fluid relative direction Against flow

Plate material thickness ASTM B265 Gr1 Titanium/ 0.50 mm


Gasket material EPDMP CLIP-ON EPDMP CLIP-ON
Joints material Rubber NBRP Rubber NBRP
Connections diameter See drawing See drawing
Connections orientation S1 T1 S4 T4

Pressure code ASME


Flange standard ASME 150#
Project pressure bar 5.0 5.0
Test pressure bar 6.5 6.5
Project temperature C 105.0 90.0

Total length x width x height mm 3255 x 650 x 1941


Flooded weight kg 2740
Packed weight (SKID STANDING) kg 2110
Internal volume m3 7.2
Length x width x height mm 3550 x 840 x 2400

Data, specifications, and other kind of information of technological nature set out in this document and submitted by Alfa Laval to you
(Proprietary Information) are intellectual proprietary rights of Alva Laval. The Proprietary Information shall remain the exclusive property of Alva
Laval and shall only be used for the purpose of evaluating Alfa Laval. The Proprietary Information may not, without the written consent of Alfa
Laval, be used or copied, reproduced, transmitted or communicated or disclosed in any other way to a third party.

You might also like