Professional Documents
Culture Documents
1a DISMENTALING
Dismantling of existing brick masonry wall of all thickness
with the help of mechanical concrete breaker with min.
hammering . In demolished material out side the campus
in municipal dumping area or stacking re-usable material
within the branch premises or as directed at site. All
precaution shall be taken to prevent any type of accident.
During execution of work if any accident and claim
caused due to carelessness of the contractor the same
shall be responsibility of contractor at there own risk and
expenses. 1.00 SQ.MT.
1b DISMENTALING
Dismantling of existing wall & floor tiles with mini
hammering and disposing the material in municipal
dumping area. All precaution shall be taken to prevent
any type of accident. During execution of work if any
accident and claim caused due to carelessness of the
contractor the same shall be responsibility of contractor at
there own risk and expenses. (Ladies Toilet Wall) 1.00 SQ.MT.
3 PLASTER
INTERNAL PLASTER : Providing and laying average 20
mm thick cement plaster in ratio 1: 5 (cement; fine sand )
in two coats including providing necessary scaffolding,
chicken wire mesh at all joints of brick and concrete
surfaces, with a minimum overlap of 150 mm in all
directions and curing complete. No extra payment shall be
made for additional thickness if required to achieve
perfect line and level. The job includes cleaning, wetting
of surface before plastering, curing etc all complete.
Required grooves to be formed as per drawing/design etc
complete as per direction of the Bank's Engineer-in-
Charge. 50.00 SQ.MT.
6 VITRIFIDE FLOORING
1200x600 tile size
Providing and fixing VITRIFIED Tiles premium quality of
approved make, shade and pattern as shown in the
drwng. / as aproved by Bank/ Architect. In CM 1:4 in
proper line and level with spacers for maintaining the grid
lines. Rate shall be inclusive of providing and laying
necessary PCC and Cement Mortar for a thickness of 3"
and joint filling compound of the same shade of the tiles
adhesive and including pop covering on the new flooring
for the protection of tiles with base covering plastic. make
KAJARIYA / NITCO/ JOHSON / SIMPOLO / SOMANY
774.34 SQ.MT.
12 ROLLING SHUTTER
ROLLING SHUTTER Supply, fabrication and fixing of MS
rolling shutter of the following specifications including grill
window of 300 mm height at eye level for visibility even in
closed position. Code: Conforming to IS 6248 1979
Type: Self Coiling type (manual) Curtains: Interlocking
cold rolled lath section of 0.8 mm thickness. Lock plate :
MS sheet of 3.15 mm thick reinforced with MS angles of
35 x 35 mm. Guide channel : MS sheets of 3.5 mm thick
Bracket Plate : MS Sheet of 0.9 mm thick.Hood Covers :
MS sheet of 0.9 mm thick Locking handle : To be
provided suitably. Rate shall include providing and fixing
holdfasts and painting two coats of enamel paint of
approved make and shade over two coats of zinc
phosphate primer. Shutter up to 10 SQM -push pull type
hand operated with ball bearings , For 10 SQM upto 30
SQM- Mechanical operated gear type with ball bearing, a
pulling hook shall be provided for each of the rolling
shutter. 4.6 SQ.MT.
1 DISMENTALING
Dismantling of existing wooden & glass partition and other
existing wooden work with min. hammering . Including
disposal of demolished material out side the campus in
municipal dumping area or stacking re-usable material
within the branch premises or as directed by bank. All
precaution shall be taken to prevent any type of accident.
During execution of work if any accident and claim
caused due to carelessness of the contractor the same
shall be responsibility of contractor at there own risk and
expenses. 1.00 LS.
17 DOOR CLOSER
Providing & fixing Door closer OF approved branch and 32.00 EACH
manufacture. Make Doorset/Dorma.
21 SIDE RUNNER
Side Runner- Providing and fixing at site
450(W)X900(L)X650(H)mm file/storage cabinet to be
made up of 19mm MR ply, & 1mm thick wooden and
Laminates finish having one row of drawers and
shuttered shelf below. Each drawer must be mounted on
telescopic sliders.All exposed edges to be finished with
1st quality rubber wood beading to be melamine polished
and all inside surfaces to be finished with .8 mm white
laminate.The cost is inclusive of all materials,
accessories, handles, lock, other hardware of hettich/
link/Dorset/haffle or equivalent) labour etc complete. 26.00 NO.
22 OFFICERS TABLE
Tables-Providing and fixing tables of specified sizes to be
made up of 19mm MR ply etc. as per detailed
Architectural drawing using Hettich / Ebco/ godrej or
equivalent make hardware, having CPU stand, a
keyboard tray drawer unit etc. All exterior surfaces to be
duly laminated and finished using 1.00 mm laminate with
necessary hardware such as handles, wire manager,
telescopic drawer slides etc. as per design. All exposed
edges to be finished with 1st quality rubber wood beading
which is to be melamine polished and all inside surfaces
to be finished with .8 mm half wite laminate. The cost is
inclusive of all materials labour etc, complete. as per the
project architect.
26 LUNCH ROOM
SIZE - 2'-0"X6'-0"
Providing and fixing tables of specified sizes to be made
up of 19mm MR ply & 4 m.m thk. Laminate finish as per
detailed Architectural drawing. 2.00 NO.
28 SOFA
Providing and placing sofa with 100 mm dia s.s. leg
construction in 19mm thick water proof Plywood/Board
W.B.R. grade (Duro / Corbett/Green), 150mm thick
rubber foam seat, wooden arms rest on 50 mm dia SS
support with cushioned back, etc complete as per given
drawing, details and Bank's Engineer-in-Charge. (Basis
price of upholstery not less than @ Rs 500/- metre & foam
density 50 to 80 etc.) 44.00 per seat
31 POP PUNNING
P O P Punning- Providing and lapplying average
thickness of 8 mm pop smooth punning to walls /roof in
proper piumb, line and level of average but excluding
thikness of key rate shall be inclusive of making vertical /
horizontal groove 3 mm x 3 mm as directed , scraping and
making all edges molding (kopras) as directed. 650.00 SQ.MT.
32 PLASTIC PAINT
Providing & applying plastic emulsion paint of approved
make and shade on walls, columns & ceilings. The rate
shall include scrapping, levelling & preparing the surface.
Primer coat + putty & 3 coats of PE Paint to get evenly
spread quality finish (roller finish) of approved make. 670.00 SQ.MT.
34 S.S RAILLING
Providing and fixing stainless steel ( Grade 304) railing
(ht. 3'-0") made of Hollow tubes, channels, plates etc.,
including welding, grinding, buffing, polishing and making
curvature (wherever required) and fitting the same with
necessary stainless steel nutsand bolts complete, i/c
fixing the railing with necessary accessories & stainless
steel dash fasteners , stainlesssteel bolts etc., of required
size, on the top of the floor or the side of waist slab with
suitable arrangement as per approval of Engineer-
incharge, ( for payment purpose only weight of stainless
steel members shall be considered including fixing
accessories such as nuts, bolts, fasteners etc.)
150.00 RMT.
35 PLANTER BOX
Planters 400mm wide 400 to 600 ht made out of 19mm
ply/board duly laminated from outside and providing GI
sheet 22 gauge from inside complete as per detailed
specifications. And architectural drawing. 16.00 Rm
TOTAL
TOTAL FURNISHING WORK PART B
PART - C : TOILET RENOVATION
S.NO. DESCRIPTION Quantity UNIT RATE AMOUNT
10 URINAL
Supplying and fixing PASTEL COLOURED vitreous china
urinal of JAQUAR / KOHLER make , CP flush valve, CP
pipe connection, CP waste coupling , CP Brass bottle
trap, 32 mm PVC waste line of required length
etc. all complete with in built sensor for water discharge
and flushing. Rate include making all
connections/electrical connections etc complete job. 5.00 Nos.
11 WASH BASIN
Providing and fixing Oval /Circular/ Elliptical shape
white/coloured vitreous china wash basin of required
specification of Jaquaer /Hindware/ Cera/ kohler or
equivalent Make as approved by Engineer-in-Charge of
size 600mmx480 mm with R.S. or C.I. brackets painted
white 15mm C.P. brass pillar traps and C.P. brass chain
with rubber plugs, 32mm C.P. brass waste of standard
pattern 32mm diameter C.P. brass bottle trap and unions
complete including necessary brackets of size
50x50x5mm cutting and making good the walls where
required etc complete. fitting to be of jaqure make as per
sample approved. 6.00 Nos.
18 valve :- Providing and fixing gun metal full way valve with
wheel of approved quality.
50mm. nominal bore 2.00 Each
80mm. nominal bore 2.00 Each
19 Providing and fixing Kasta/ Supreme/ Kissan or equivalent
as approved by Engineer-in-Charge, nahani trap.
TOTAL
PART E - CHAIRS
S.NO. DESCRIPTION Quantity UNIT RATE AMOUNT
a DGM CHAIR 1 NO
(Model no.- Feather lite -contact project -HB /
WIPRO - Wipro lounches yuva viva High back/
GODREJ- High performance Halo very high back
e VISITOR CHAIRS
(Model no.- Feather lite -contact project VISITOR
(SLEDGE BASE))
WIPRO - Wipro lounches yuva viva visitor /
GODREJ- High performance Halo visitor
TOTAL
GRAND TOTAL
PART E - CHAIRS