Professional Documents
Culture Documents
Por
Marzo, 2006
iii
Marzo, 2006
iii
2i
RESUMEN
El presente proyecto consta el diseo de una red telefnica fija de uso residencial,
para la Urbanizacin Ciudad Casarapa ubicada en la localidad de Guarenas Estado
Miranda, fundamentado en base a la necesidad de brindar a los residentes de la
urbanizacin, mayor diversidad y calidad en servicios de telecomunicaciones utilizando la
infraestructura de planta externa (tendido de par de cobre) de CANTV, como parte de la red
de acceso de interconexin con la operadora Movistar, todo esto dentro del marco legal
otorgado por la Ley Orgnica de Telecomunicaciones del 2000, para la apertura de
telecomunicaciones en materia de Vas Generales de Telecomunicaciones. Esta red pone
a disposicin de los residentes de la urbanizacin servicios de telecomunicaciones tales
como telefona fija bsica de voz, fax y datos (por medio de POTS e Interfases V5.2) y
acceso a Internet de banda ancha, bien sea haciendo uso de la infraestructura de planta
externa ya presente en la urbanizacin (tecnologa ADSL) o mediante una red de acceso
inalmbrico (Wi-Fi).
Palabras Clave: Apertura de Telecomunicaciones, Telefona Fija, V5.2, Internet de Banda Ancha, Acceso
Inalmbrico, ADSL, Wi-Fi, Casarapa, Movistar.
3
NDICE GENERAL
NDICE DE TABLAS...........................................................................................................xi
CAPTULO I ........................................................................................................................ 17
INTRODUCCIN................................................................................................................ 17
1.3. Objetivos........................................................................................................................ 20
1.5. Metodologa................................................................................................................... 22
CAPTULO II....................................................................................................................... 25
2.1.3. Sealizacin................................................................................................................ 30
2.2.7.1. Ethernet.................................................................................................................... 50
2.3.2.1.3. Infrarrojo............................................................................................................... 68
2.3.2.6.1.2. Autenticacin..................................................................................................... 83
2.3.2.6.1.3. Caractersticas.................................................................................................... 84
2.3.1.5.2. EAP-TTLS............................................................................................................ 99
6.3. Equipos Seleccionados para la Solucin Red Inalmbrica Wi-Fi ............................... 174
Conclusiones....................................................................................................................... 184
ANEXOS............................................................................................................................ 208
12
NDICE DE TABLAS
Tabla Pg.
6.5: Especificaciones Tcnicas de los Puntos de Acceso / Puentes Cisco Aironet 1300. . 168
600AG.......................................................................................................................... 172
NDICE DE FIGURAS
Figura Pg.
CAPTULO I
INTRODUCCIN
Este proyecto se encuentra fundamentado en el derecho otorgado por esta ley a los
operadores de hacer uso de las vas generales de telecomunicaciones existentes, en la forma
y modalidades que determine CONATEL, donde se consideran Vas Generales de
Telecomunicaciones los ductos, tuberas, tanquillas y dems elementos que permitan el
emplazamiento de los medios a travs de los cuales se transmite la informacin.
En la actualidad Venezuela posee una densidad telefnica acorde con los estndares
de un pas en vas de desarrollo. Segn cifras oficiales de CANTV el estimado de la
densidad de penetracin telefnica es de 12 lneas por cada 100 habitantes, siendo el
promedio en los pases desarrollados de 59 conexiones por centenar de habitantes.
Mejorar la calidad de vida de los residentes a travs del acceso a los servicios de
telecomunicaciones de valor agregado.
1.3. Objetivos
Diseo de una red telefnica local fija con servicios de Internet de banda ancha de
uso residencial para Movistar.
Determinar y analizar las bases tericas que sustenten el diseo de una red
telefnica local fija de uso residencial, por medio de interfases de acceso distribuido
V5.2 y acceso a datos ADSL o Wi-Fi.
1.4. Limitaciones
La principal limitacin que enfrenta este trabajo gira entorno a que, debido a
Polticas de Seguridad y Normas de Confidencialidad de Movistar Venezuela, como autores
nos hemos visto forzados a omitir intencionalmente informacin general y/o especfica con
respecto a algunos tpicos del proyecto.
Por otra parte, con respecto a la adecuacin de este diseo a los sistemas de
conmutacin instalados y en produccin de Movistar, no sern tomadas en cuenta para el
proyecto las Centrales Motorola EMX-2500, Lucent 5ESS, debido a que por topologas
de las redes definidas por el Personal de Ingeniera de Movistar, estas centrales estn
destinadas para uso exclusivo de las redes celulares.
1.5. Metodologa
Captulo III, se detallan las caractersticas del Parque Residencial Ciudad Casarapa,
los servicios de telecomunicaciones existentes para telefona fija e Internet de banda
ancha y la infraestructura actualmente instalada.
CAPTULO II
El terminal telefnico.
Las centrales de conmutacin.
La sealizacin.
26
Las tcnicas de conmutacin utilizadas en las centrales telefnicas han sufrido una
profunda evolucin, paralela a la de la tecnologa electrnica. As, desde los primeros
conmutadores mecnicos se ha pasado a los actuales sistemas electrnicos de conmutacin,
que permiten, adems toda una serie de operaciones extras como son el encaminamiento
alternativo de las llamadas (enviar una llamada a travs de una ruta u otra dependiendo de
las condiciones de las lneas, del trafico, etc.), tarificacin detallada, etc.
por equipos amplificadores que detectan y amplifican las seales telefnicas, para vencer
as las prdidas que se producen en los medios de transmisin.
Las formas de onda analgicas se pasan por un filtro de frecuencia de voz para
filtrar cualquier seal que sea mayor que 4.000 Hz. Al utilizar el teorema de
Nyquist, se necesita muestrear a 8000 muestras por segundo para alcanzar una
transmisin de voz de buena calidad.
Si se multiplican las palabras de ocho bits 8.000 veces por segundo, se obtienen
64.000 bits por segundo (bps). La base para la infraestructura del telfono es 64.000 bps (o
64 kbps).
2.1.3. Sealizacin
La sealizacin puede ser del tipo de seales de impulsos o por niveles indicativos
de estados; mientras el primero permite un plan complejo de sealizacin el segundo
32
garantiza una supervisin sencilla de la lnea. Prcticamente, este mtodo solo se usa en
lneas bifilares y se pueden distinguir dos tipos: el procedimiento de sealizacin en bucle
(mientras un extremo maneja los potenciales el otro lo hace con el bucle cerrado o abierto)
y la sealizacin por un solo hilo (potencial positivo o negativo en cada sentido).
En la Figura 2.2 se ilustran algunos de los protocolos mas utilizados por los
elementos de las redes telefnicas tales como, PABX, Media Gateways, Signaling
Gateways y PSTN.
Este tipo de sealizacin se denomina Sealizacin por Canal Comn CCS (La
nomenclatura SS7 corresponde al ITU-T y CCS7 a ANSI). Las principales caractersticas
que identifican a la sealizacin CCS frente a CAS son:
Encaminamiento alternativo.
La capa 3 est prevista para mensajes en tiempo real de la red telefnica y es del
tipo orientado sin-conexin.
34
En la Figura 2.3, se describen los mtodos de sealizacin por canal asociados y por
canal comn.
Los protocolos del sistema de sealizacin por canal comn n 7 (SS7) fueron
desarrollados por AT&T a partir de 1975 y definidos como un estndar por el UIT-T en
1981 en la serie de Recomendaciones Q.7XX del UIT-T. [2]
MTP-3. Posee una direccin de punto de acceso que permite identificar a la capa
superior (TCAP o ISUP sobre el protocolo MTP3). En la red PSTN se dispone de
las direcciones de procesador CPU de origen y destino (14 bits de direccin). Por
otro lado, identifica el enlace de sealizacin utilizado cuando existe ms de uno.
Realiza las funciones de Routing dentro de la red de sealizacin SS7.
Nodo o Host: Ente o equipo de conectividad que forma parte de una red siendo
indiferente a la funcin que desempee (PC, Switch, Router, entre otros).
Medio Fsico: Desde los conectores y cables hasta la fibra ptica de alta velocidad,
los enlaces fsicos que conectan todo entre si son el fundamento de la interconexin
de una red.
39
Tecnologas de Red: Los protocolos LAN soportan lo que sucede sobre el cable. La
ms conocida es Ethernet.
Existe una muy amplia variedad de protocolos. Muchos de ellos han cado en
desuso para dar paso a protocolos ms poderosos, tal es el caso del TCP/IP, que ha venido
acaparando mercado gracias a que es utilizado por Internet.
Existen protocolos de alto nivel y protocolos de bajo nivel. Los protocolos de bajo
nivel se encargan de los detalles de transmisin, tales como decidir cundo se puede
transmitir o no, y determina si los datos llegaron libres de errores o no. Ejemplos de estos
protocolos son el CSMA/CD, Token Ring y FDDI.
Los protocolos de alto nivel manejan procesos ms complejos, tales como solicitar
informacin de identificacin del usuario, decidir la ruta ptima para alcanzar un destino y
40
Se llama topologa de una Red al patrn de conexin entre sus nodos, es decir, a la
forma en que estn interconectados los distintos nodos que la forman. Los criterios a la hora
de elegir una topologa, en general, buscan evitar el costo del encaminamiento (necesidad
de elegir los caminos ms simples entre el nodo y los dems). Otro criterio determinante es
la tolerancia frente a las fallas o la facilidad de localizacin de stas, as como tambin
tenemos que tener en cuenta la facilidad de instalacin y reconfiguracin de la red. Entre
las topologas ms comunes se encuentran la tipo bus, tipo anillo y tipo estrella.
Otra propiedad interesante es que el Bus acta como medio pasivo y por lo tanto, en
caso de extender la longitud de la red, el mensaje no debe ser regenerado por repetidores
(los cuales deben ser muy fiables para mantener el funcionamiento de la red). En este tipo
de topologa cualquier ruptura en el cable impide la operacin normal y es muy difcil de
detectar. Por el contrario, el fallo de cualquier nodo no impide que la red siga funcionando
normalmente, lo que permite aadir o quitar nodos a la red sin interrumpir su
funcionamiento.
Esta se caracteriza por un camino unidireccional cerrado que conecta todos los
nodos. Dependiendo del control de acceso al medio, se dan nombres distintos a esta
topologa: Bucle; se utiliza para designar aquellos anillos en los que el control de acceso
est centralizado (una de las estaciones se encarga de controlar el acceso a la red). Anillo;
se utiliza cuando el control de acceso est distribuido por toda la red. Como las
caractersticas de uno y otro tipo de la red son prcticamente las mismas, se utiliza el
trmino anillo para las dos.
excesivamente difcil de instalar, aunque gaste ms cable que un Bus, pero el costo de
mantenimiento sin puntos centralizadores puede ser intolerable. La combinacin
estrella/anillo puede proporcionar una topologa muy fiable sin el costo exagerado de cable
como estrella pura.
para el flujo de informacin hacia un tercer nodo hasta tanto no termine la conexin en
curso.
PAN
LAN
WAN
MAN
Se puede comparar el software que gestiona una red local con el sistema operativo
de una computadora. Los programas y utilidades que componen el software de la LAN,
hacen de puente de unin entre el usuario y el ncleo central de la computadora.
Las Redes de rea Extensa (Wide Area Network) son redes punto a punto que
interconectan pases y continentes. Al tener que recorrer una gran distancia sus velocidades
son menores que en las LAN aunque son capaces de transportar una mayor cantidad de
datos. El alcance es una gran rea geogrfica, como por ejemplo: una ciudad o un
continente. Est formada por una vasta cantidad de computadoras interconectadas
(llamadas hosts), por medio de subredes de comunicacin o subredes pequeas, con el fin
de ejecutar aplicaciones, programas, etc.
Las redes LAN comnmente, se conectan a redes WAN, con el objetivo de tener
acceso a mejores servicios, como por ejemplo a Internet. Las redes WAN son mucho ms
complejas, porque deben enrutar correctamente toda la informacin proveniente de las
redes conectadas a sta.
46
Lneas de transmisin: quienes son las encargadas de llevar los bits entre los
hosts.
Conmutacin de circuitos
Conmutacin de paquetes
Mientras que la conmutacin de circuitos asigna un canal nico para cada sesin, en
los sistemas de conmutacin de paquetes el canal es compartido por muchos usuarios
simultneamente. La conmutacin de paquetes es ms eficiente y robusta para datos que
pueden ser enviados con retardo en la transmisin (no en tiempo real), tales como el correo
electrnico, pginas Web, archivos, entre otros.
Unicast
Multicast
Broadcast
2.2.6.1. Unicast
2.2.6.2. Multicast
2.2.6.3. Broadcast
Ethernet
Fast Ethernet
50
100VG-AnyLAN
Gigabit Ethernet
WLAN
2.2.7.1. Ethernet
La norma de Ethernet fue definida por el Instituto para los Ingenieros Elctricos y
Electrnicos (IEEE) como IEEE Standard 802.3. Adhirindose a la norma de IEEE, los
equipos y protocolos de red pueden interoperar eficazmente. [2]
Para redes Ethernet que necesitan mayores velocidades, se estableci la norma Fast
Ethernet (IEEE 802.3u). Esta norma elev los lmites de 10 Megabits por segundo (Mbps)
de Ethernet a 100 Mbps con cambios mnimos a la estructura del cableado existente. Hay
tres tipos de Fast Ethernet: 100BASE-TX para el uso con cable UTP de categora 5,
100BASE-FX para el uso con cable de fibra ptica, y 100BASE-T4 que utiliza un par de
cables ms para permitir el uso con cables UTP de categora 3. La norma 100BASE-TX se
ha convertido en la ms popular debido a su ntima compatibilidad con la norma Ethernet
10BASE-T.
2.2.7.3. 100VG-AnyLAN
Es una extensin del estndar Ethernet IEEE 802.3, en el cual ofrecen 100 Mbps de
velocidad manteniendo total compatibilidad con redes Ethernet y Fast Ethernet. La
innovacin aqu es que la transmisin predeterminada es full-duplex pero permite half-
duplex, adems mantiene el formato de la trama Ethernet y Fast Ethernet. Gigabit Ethernet
ha sido diseada para trabajar sobre fibra ptica pero permite la utilizacin de cableado
UTP nivel 6 y cable coaxial.
2.2.7.5. WLAN
Las WLAN se encuadran dentro de los estndares desarrollados por el IEEE para
redes locales inalmbricas. Como todos los estndares 802 para redes locales del IEEE, en
el caso de las WLAN, tambin se centran en los dos niveles inferiores del modelo OSI, el
fsico y el de enlace, por lo que es posible correr por encima cualquier protocolo (TCP/IP o
cualquier otro) o aplicacin, soportando los sistemas operativos de red habituales, lo que
supone una gran ventaja para los usuarios que pueden seguir utilizando sus aplicaciones
habituales, con independencia del medio empleado, sea por red de cable o por radio.
El estndar original de este protocolo data de 1997, denominado IEEE 802.11, tena
velocidades de 1 hasta 2 Mbps y trabajaba en la banda de frecuencia de 2,4 GHz. En la
actualidad no se fabrican productos sobre este estndar. El trmino IEEE 802.11 se utiliza
tambin para referirse a este protocolo al que ahora se conoce como "802.11legacy." La
siguiente modificacin apareci en 1999 y es designada como IEEE 802.11b, esta
especificacin tena velocidades de 5 hasta 11 Mbps, igualmente trabajaba en la frecuencia
de 2,4 GHz. Tambin se realiz una especificacin sobre una frecuencia de 5 GHz que
alcanzaba los 54 Mbps, era la 802.11a y resultaba incompatible con los productos de la b y
por motivos tcnicos casi no se desarrollaron productos. Posteriormente se incorporo un
estndar a esa velocidad y compatible con el b que recibira el nombre de 802.11g. En la
actualidad la mayora de productos son de la especificacin b y de la g (actualmente se est
desarrollando la 802.11n, que se espera que alcance los 500 Mbps). La seguridad forma
parte del protocolo desde el principio y fue mejorada en la revisin 802.11i. Otros
estndares de esta familia (cf, hj, n) son mejoras de servicio y extensiones o correcciones
a especificaciones anteriores. El primer estndar de esta familia que tuvo una amplia
aceptacin fue el 802.11b. En 2005, la mayora de los productos que se comercializan
siguen el estndar 802.11g con compatibilidad hacia el 802.11b. [5]
En junio del ao 1997 el IEEE ratific el estndar para WLAN IEEE 802.11, que
alcanzaba una velocidad de 2 Mbps, con una modulacin de seal de espectro expandido
por secuencia directa (DSSS), aunque tambin contempla la opcin de espectro expandido
por salto de frecuencia, FHSS en la banda de 2,4 GHz, y se defini el funcionamiento y la
interoperabilidad entre redes inalmbricas.
El 802.11 es una red local inalmbrica que usa la transmisin por radio en la banda
de 2.4 GHz, o infrarroja, con regmenes binarios de 1 a 2 Mbps. El mtodo de acceso al
medio MAC (Medium Access Mechanism) es mediante escucha pero sin deteccin de
colisin, CSMA/CA (Carrier Sense Multiple Access with Collision Avoidance).
normalizadas a nivel fsico son: 5,5 - 2 y 1 Mbps) y un alcance de 100 metros, que al igual
que Bluetooth y Home RF, tambin emplea la banda de ISM de 2,4 GHz, pero en lugar de
una simple modulacin de radio digital y salto de frecuencia FH (Frequency Hopping),
utiliza una la modulacin lineal compleja (DSSS). Permite mayor velocidad y el alcance
puede llegar a los 100 metros, suficientes para un entorno de oficina o residencial. Debido
al espacio ocupado por la codificacin del protocolo CSMA/CA, en la prctica, la
velocidad mxima de transmisin con este estndar es de aproximadamente 5.9 Mbps sobre
TCP y 7.1 Mbps sobre UDP. [5]
Con el estndar 802.11e para multimedia, que est diseada para mejorar la entrega
de audio y vdeo en transferencia continua, la tecnologa IEEE 802.11 soporta trfico en
tiempo real en todo tipo de entornos y situaciones. Las aplicaciones en tiempo real son
ahora una realidad por las garantas de Calidad de Servicio (QoS) proporcionado por el
802.11e. El objetivo del nuevo estndar 802.11e es introducir nuevos mecanismos a nivel
57
de capa MAC para soportar los servicios que requieren garantas de Calidad de Servicio.
Para cumplir con su objetivo IEEE 802.11e introduce un nuevo elemento llamado Hybrid
Coordination Function (HCF) con dos tipos de acceso:
Hoy en da el estndar 802.11 Super G, con una banda de 2.4 GHz y 5 GHz, logra
una velocidad de transferencia de 108 Mbps, sostiene WPA y WEP para su proteccin y es
compatible con 802.11b y dispositivos 802.11g.
802.11 Super G brinda velocidades muy por encima de los 18 Mbps de la 802.11g y
de unos 4,5 Mbps de la 802.11b que se obtienen generalmente, lo cual puede ser un
atractivo para los usuarios que necesitan transferir archivos grandes de una computadora a
otra de manera inalmbrica, o hacer transferencias continuas de archivos de multimedia de
alta calidad. Sin embargo, si un usuario utiliza el servicio slo para navegar la Internet, la
mayora de los servicios de banda ancha se conectan a una velocidad muy por debajo de 1
Mbps. Por lo tanto, aunque utilice un equipo inalmbrico mejorado no experimentar un
desempeo ms rpido.
La red de acceso abarca los elementos tecnolgicos que soportan los enlaces de
telecomunicaciones entre los usuarios finales y el ltimo nodo de la red. Sus principales
componentes son: los medios de comunicacin (par de cobre, cable coaxial, fibra ptica,
canal radioelctrico) y los elementos que realizan la adecuacin de la seal a los mismos.
-( )-
RED DE ACCESO
(Par de Cobre, Coaxial, Fibra, NODO CENTRAL
DE CONMUTACION
Radio, Satlite, Telefona Mvil)
USUARIO
xDSL esta formado por un conjunto de tecnologas que proveen un gran ancho de
banda sobre circuitos locales de cable de cobre, sin amplificadores ni repetidores de seal a
lo largo de la ruta del cableado, entre la conexin del cliente y el primer nodo de la red. Son
unas tecnologas de acceso punto a punto a travs de la red pblica, que permiten un flujo
de informacin tanto simtrico como asimtrico y de alta velocidad sobre el bucle de
abonado.
El ADSL es una tcnica para la transmisin de datos a gran velocidad sobre par de
cobre. Una diferencia entre el esquema de modulacin empleado por ella y las usadas por
los mdems en banda vocal (V.32 a V.90), es que estos ltimos slo transmiten en la banda
de frecuencias usada en telefona (300 Hz a 3400 Hz), mientras que los mdems ADSL
60
operan en un margen de frecuencias mucho ms amplio que va desde los 24 KHz hasta los
1104 KHz, aproximadamente. Esto hace que el ADSL pueda coexistir en un mismo lazo de
abonado con el servicio telefnico, pues no se solapan sus intervalos de frecuencia, cosa
que no es posible con un mdem convencional pues opera en banda vocal, la misma que la
telefona, lo que constituye otra diferencia de gran importancia. [9]
Estas subportadoras estn separadas entre s 4,3125 KHz, y el ancho de banda que
ocupa cada subportadora modulada es de 4 KHz. El reparto del flujo de datos entre
subportadoras se hace en funcin de la estimacin de la relacin Seal/Ruido en la banda
asignada a cada una de ellas.
Cuanto mayor es esta relacin, tanto mayor es el caudal que puede transmitir por
una subportadora. Esta estimacin de la relacin Seal/Ruido se hace al comienzo, cuando
se establece el enlace entre el ATU-R y el ATU-C, por medio de una secuencia predefinida.
Las ltimas modificaciones a los estndares sobre ADSL han llevado al desarrollo
de una nueva generacin de mdems capaces de transmitir hasta 8,192 Mbps en sentido
descendente y hasta 0,928 Mbps en sentido ascendente. La separacin de los trayectos en
ADSL se efecta por Multiplexacin por Divisin en Frecuencias (FDM) o por
Cancelacin de Eco, siendo esta ltima la que se ha impuesto. En la Figura 2.10 se detalla
62
la modulacin ADSL DMT con FDM y en la Figura 2.11 la modulacin ADSL DMT con
cancelacin de eco.
En la modulacin ADSL DMT con FDM los espectros de las seales ascendente y
descendente no se solapan, lo que simplifica el diseo de los mdems, aunque reduce la
capacidad de transmisin en sentido descendente, no tanto por el menor nmero de
subportadoras disponibles como por el hecho de que las de menor frecuencia, aquellas para
las que la atenuacin del par de cobre es menor, no estn disponibles. En la modulacin
ADSL DMT con cancelacin de eco se basa en un cancelador de eco para la separacin de
63
las seales correspondientes a los dos sentidos de transmisin, permite mayores caudales a
costa de una mayor complejidad en el diseo.
Como se puede ver, los espectros nunca se solapan con la banda reservada para el
servicio telefnico bsico POTS, (Plain Old Telephone Service), y en cambio s se solapan
con los correspondientes al acceso bsico RDSI. Por ello el ADSL y el acceso bsico RDSI
son incompatibles, aunque existen implementaciones que logran la compatibilidad.
Ambas cosas explican que el caudal mximo que se puede conseguir mediante los
mdems ADSL vare en funcin de la longitud de la lnea de abonado. La presencia de
ruido externo provoca la reduccin de la relacin Seal/Ruido con la que trabaja cada una
de las subportadoras, y esa disminucin se traduce en una reduccin del caudal de datos que
modula a cada subportadora, lo que a su vez implica una reduccin del caudal total que se
puede transmitir a travs del enlace entre el ATU-R y el ATU-C.
Como todos los estndares 802.x, la especificacin 802.11 recoge las operaciones
de acceso al medio (MAC) y las capas fsicas. Como se puede ver en la tabla 2.3, el
65
estndar 802.11 define una sub-capa MAC, los servicios y protocolos MAC y tres capas
fsicas (PHY). En la tabla 2.4 se muestra el formato de las tramas 802.11.
Infrarojo Difuso
En la figura 2.13 se muestra un diagrama descriptivo del la capa fsica del protocolo
y sus extensiones. [7]
66
Los sistemas que usan la tcnica de salto de frecuencia consumen menos potencia
que los que emplean secuencia directa y generalmente son ms econmicos. Por otra parte,
los radios que operan con secuencia directa alcanzan velocidades de bits del orden de 8
Mbps, en tanto que la velocidad de transmisin en aquellos radios que operan con salto de
frecuencia est limitada en la prctica a alrededor de 2 Mbps. Por lo tanto, si se requiere un
ptimo desempeo y la interferencia no es un problema, es recomendable utilizar radios de
secuencia directa. Pero si lo que se desean son unidades mviles pequeas y baratas la
tcnica de salto de frecuencia es la ms adecuada. Es importante resaltar que con cualquiera
de los dos mtodos el resultado es un sistema que es extremadamente difcil de violar, que
no interfiere con otros sistemas y que transporta grandes cantidades de informacin. En la
Figura 2.15 se ilustra DSSS.
2.3.2.1.3. Infrarrojo
Se utiliza un "transreceptor" que enva un haz de Luz Infrarroja, hacia otro que la
recibe. La transmisin de luz se codifica y decodifica en el envo y recepcin en un
protocolo de red existente.
69
Existen tres modos diferentes de radiacin para intercambiar la energa ptica entre
transmisores-receptores:
Punto-a-Punto
Cuasi-Difuso
Difuso
En el modo punto-a-punto los patrones de radiacin del emisor y del receptor deben
de estar lo ms cerca posible, para que su alineacin sea correcta. Como resultado, el modo
punto-a-punto requiere una lnea-de-vista entre las dos estaciones a comunicarse.
En el modo difuso, el poder de salida de la seal ptica de una estacin, debe ser
suficiente para llenar completamente el total del cuarto, mediante mltiples reflexiones, en
paredes y obstculos del cuarto. Por lo tanto la lnea-de-vista no es necesaria y la estacin
se puede orientar hacia cualquier lado. El modo difuso es el ms flexible, en trminos de
localizacin y posicin de la estacin, sin embargo esta flexibilidad esta a costa de
excesivas emisiones pticas.
70
Por otro lado la transmisin punto-a-punto es el que menor poder ptico consume,
pero no debe de haber obstculos entre las dos estaciones. En la topologa de Ethernet se
puede usar el enlace punto-a-punto, pero el retardo producido por el acceso al punto ptico
de cada estacin es muy representativo en el rendimiento de la red. Es ms recomendable y
ms fcil de implementar el modo de radiacin cuasi-difuso. La tecnologa infrarroja esta
disponible para soportar el ancho de banda de Ethernet, ambas reflexiones son soportadas
(por satlites y reflexiones pasivas).
Los sistemas infrarrojos no son prcticos para redes de usuarios mviles por lo que
nicamente se implementa en sub-redes fijas. [5]
Al contrario que Ethernet que enva seales hasta que encuentra una colisin,
CSMA/CA tiene mucho cuidado de no transmitir nada hasta que la unidad receptora esta
escuchando y no hay nadie ms transmitiendo. Esto se denomina LBT (Listening Before
Talking). Antes de que un paquete sea enviado, el dispositivo se pone a la escucha para
saber si hay alguien transmitiendo. Si hay alguien transmitiendo, el dispositivo espera
durante un periodo de tiempo predeterminado, pasado el cual, se pone a la escucha de
nuevo. Si nadie ms esta usando el medio, comienza a transmitir. Si no, repite el ciclo de
espera.
Es difcil descubrir colisiones en una red de transmisin RF y es por esta razn por
la que se usa la anulacin de colisin.
Asociacin: Este proceso es el que le dar acceso a la red y solo puede ser
llevado a cabo una vez autenticado.
Seguridad: Mediante WEP, con este protocolo se cifran los datos pero no los
encabezados.
Modo ahorro de energa: Cuando esta activado este modo, el cliente envi
previamente al AP una trama indicando que se ir a dormir, El AP, coloca
en su buffer estos datos. Se debe tener en cuenta que por defecto este modo
suele estar inactivo (lo que se denomina Constant Awake Mode: CAM).
72
Una red Ad-hoc es una red simple donde se establecen comunicaciones entre las
mltiples estaciones en un rea de cobertura dada sin el uso de un punto de acceso o
servidor. La norma especifica la etiqueta que cada estacin debe observar para que todas
ellas tengan un acceso justo a los medios de comunicacin inalmbricos. Proporciona
mtodos de peticin de arbitraje para utilizar el medio para asegurarse de que el
rendimiento se maximiza para todos los usuarios del conjunto de servicios base. En la
Figura 2.16 se ilustra la topologa de la red Ad-hoc.
se usa para manejar el trfico desde la radio mvil hasta las redes cliente / servidor
cableadas o inalmbricas. Esta configuracin permite coordinacin puntual de todas las
estaciones en el rea de servicios base y asegura un manejo apropiado del trfico de datos.
El punto de acceso dirige datos entre las estaciones y otras estaciones inalmbricas y/o el
servidor de la red. Tpicamente las WLAN controladas por un punto de acceso central
proporcionar un rendimiento mucho mayor. En la Figura 2.17 se ilustra la topologa de la
red cliente/servidor. [8]
BSS (Basic Service Set): Es el bloque bsico de construccin de una LAN 802.11.
En el caso de tratarse de nicamente 2 estaciones ser denomina IBSS (Independent
BSS), es lo que a menudo se denomina Ad Hoc Netwok.
ESS (Extended Service Set): Tanto BSS como DS permiten crear redes inalmbricas
de tamao arbitrario, este tipo de redes se denominan redes ESS.
La integracin entre una red 802.11 y una distinta se realiza mediante un Portal o
Gateway. Es posible que un mismo dispositivo cumpla las funciones de AP y Portal.
Los puntos de acceso funcionan como puentes entre la red inalmbrica y la red
cableada por lo tanto constan de al menos dos interfaces; uno Ethernet y otro inalmbrico.
Muchos productos tambin incorporan una interfaz WAN. Pudiendo ser esta un puerto serie
para poder conectarlo a un mdem. Tambin se pueden encontrar puertos para conexiones
DSL o cable-mdem. Incluso se pueden encontrar aparatos con varios interfaces
inalmbricos. Tambin con la posibilidad de acoplar antenas externas para ampliar el rango
de cobertura. [5]
2.3.2.4.3. Antenas
Orientan la seal en una direccin muy determinada con un haz estrecho pero de
largo alcance. Una antena direccional acta de forma parecida a un foco que emite un haz
de luz concreto y estrecho pero de forma intensa (ms alcance).
77
El alcance de una antena direccional viene determinado por una combinacin de los
dBi de ganancia de la antena, la potencia de emisin del punto de acceso emisor y la
sensibilidad de recepcin del punto de acceso receptor. En la Figura 2.19 se muestra una
antena direccional.
Orientan la seal en todas direcciones con un haz amplio pero de corto alcance. Si
una antena direccional sera como un foco, una antena omnidireccional sera como una
bombilla emitiendo luz en todas direcciones pero con una intensidad menor que la de un
foco, es decir, con menor alcance.
Otros tipos de antenas derivadas de las anteriores son las sectoriales, Yagi,
parablicas o de plato, bipolo, y otras.
La polarizacin es una de las caractersticas de las antenas que hay que tener muy en
cuenta. La polarizacin de una antena se refiere a la direccin en la cual viaja la parte
elctrica de la onda electromagntica. Las ms usuales son la polarizacin vertical y la
horizontal. En algunas antenas puede aparecer la polarizacin circular (horaria o anti-
horaria). La polarizacin de las antenas a ambos extremos de un enlace debe coincidir.
Para tener una cobertura de 360 (como una antena omnidireccional) y un largo
alcance (como una antena direccional) deberemos instalar o tres antenas sectoriales de 120
4 antenas sectoriales de 80. Las antenas sectoriales suelen ser ms costosas que las
antenas direccionales u omnidireccionales. En la Figura 2.21 se muestra una antena
sectorial.
Otros elementos relacionados con las antenas son: cables, conectores, adaptadores,
splitters, amplificadores y fusibles anti-descargas (se utiliza como medio de proteccin del
instrumental en caso de cada de un rayo).
La apertura vertical debe ser tenida en cuenta si existe mucho desnivel entre los
puntos a unir inalmbricamente. Si el desnivel es importante, la antena deber tener mucha
apertura vertical. Por lo general las antenas, a ms ganancia (potencia por decirlo de algn
modo) menos apertura vertical. En las antenas direccionales, por lo general, suelen tener las
mismas aperturas verticales y horizontales.
2.3.2.5. PoE
Para implementar PoE en una red que no se dispone de dispositivos que la soporten
directamente se usa una unidad base (con conectores RJ45 de entrada y de salida) con un
adaptador de alimentacin para recoger la electricidad y una unidad terminal (tambin con
conectores RJ45) con un cable de alimentacin para que el dispositivo final obtenga la
energa necesaria para su funcionamiento.
2.3.2.6. Seguridad
El canal de las redes inalmbricas, al contrario que en las redes cableadas privadas,
debe considerarse inseguro. Cualquiera podra estar escuchando la informacin transmitida.
81
Y no slo eso, sino que tambin se pueden inyectar nuevos paquetes o modificar los ya
existentes (ataques activos). Las mismas precauciones que tenemos para enviar datos a
travs de Internet deben tenerse tambin para las redes inalmbricas.
Una estacin de red que reciba una solicitud puede conceder la autorizacin a
cualquier estacin, o slo a aquellas que estn incluidas en una lista predefinida. En un
sistema de clave compartida, slo aquellas estaciones que posean una llave cifrada sern
autenticadas.
Aunque los sistemas WLAN pueden resistir las escuchas ilegales pasivas, la nica
forma efectiva de prevenir que alguien pueda comprometer los datos transmitidos consiste
en utilizar mecanismos de cifrado. El propsito de WEP es garantizar que los sistemas
WLAN dispongan de un nivel de confidencialidad equivalente al de las redes LAN
cableadas, mediante el cifrado de los datos que son transportados por las seales de radio.
2.3.2.6.1.1. Cifrado
WEP utiliza una clave secreta compartida entre una estacin inalmbrica y un punto
de acceso. Todos los datos enviados y recibidos entre la estacin y el punto de acceso
pueden ser cifrados utilizando esta clave compartida. El estndar 802.11 no especifica
cmo se establece la clave secreta, pero permite que haya una tabla que asocie una clave
exclusiva con cada estacin. En la prctica general, sin embargo, una misma clave es
compartida entre todas las estaciones y puntos de acceso de un sistema dado.
2.3.2.6.1.2. Autenticacin
WEP proporciona dos tipos de autenticacin: un sistema abierto, en el que todos los
usuarios tienen permiso para acceder a la WLAN, y una autenticacin mediante clave
compartida, que controla el acceso a la WLAN y evita accesos no autorizados a la red. De
los dos niveles, la autenticacin mediante clave compartida es el modo seguro. En l se
utiliza una clave secreta compartida entre todas las estaciones y puntos de acceso del
sistema WLAN. Cuando una estacin trata de conectarse con un punto de acceso, ste
replica con un texto aleatorio, que constituye el desafo (challenge). La estacin debe
utilizar la copia de su clave secreta compartida para cifrar el texto de desafo y devolverlo
al punto de acceso, con el fin de autenticarse. El punto de acceso descifra la respuesta
utilizando la misma clave compartida y compara con el texto de desafo enviado
anteriormente. Si los dos textos son idnticos, el punto de acceso enva un mensaje de
confirmacin a la estacin y la acepta dentro de la red. Si la estacin no dispone de una
clave, o si enva una respuesta incorrecta, el punto de acceso la rechaza, evitando que la
estacin acceda a la red.
un sistema WLAN pueden tener la misma clave compartida, dependiendo de cmo se haya
instalado el sistema. En tales redes, no es posible realizar una autenticacin
individualizada; todos los usuarios, incluyendo los no autorizados, que dispongan de la
clave compartida podrn acceder a la red. Esta debilidad puede tener como resultado
accesos no autorizados, especialmente si el sistema incluye un gran nmero de usuarios.
Cuantos ms usuarios haya, mayor ser la probabilidad de que la clave compartida pueda
caer en manos inadecuadas.
2.3.2.6.1.3. Caractersticas
2.3.2.6.1.4 Algoritmos
Se calcula un CRC de 32 bits de los datos. Este CRC-32 es el mtodo que propone
WEP para garantizar la integridad de los mensajes ICV (Integrity Check Value).
Se calcula la O exclusiva (XOR) de los caracteres del punto 1 con los del punto 3.
El resultado es el mensaje cifrado.
Se enva el IV (sin cifrar) y el mensaje cifrado dentro del campo de datos (frame
body) de la trama IEEE 802.11.
64 bits
IV RC4
Shared Key
Zona cifrada
RC4
Clave PRNG
RC4
Clave PRNG
Sin embargo, el estndar 802.11 no especifica cmo manejar el IV; se indica que
debera cambiarse en cada trama para mejorar la privacidad, pero no obliga a ello. Queda
abierta a los fabricantes la cuestin de cmo variar el IV en sus productos. La consecuencia
de esto es que buena parte de las implementaciones optan por una solucin sencilla: cada
vez que arranca la tarjeta de red, se fija el IV a 0 y se incrementa en 1 para cada trama. Esto
ocasiona que las primeras combinaciones de IVs y clave secreta se repitan muy
frecuentemente. Ms an, si tenemos en cuenta que cada estacin utiliza la misma clave
secreta, por lo que las tramas con igual clave se multiplican en el medio. Por otro lado, el
nmero de IVs diferentes no es demasiado elevado (224=16 millones aprox.), por lo que
88
Si se han capturado varias tramas con igual IV, es decir, con igual keystream, solo
se necesita conocer el mensaje sin cifrar de una de ellas, haciendo el XOR entre un mensaje
sin cifrar y el mismo cifrado, nos dar el keystream para ese IV. Conociendo el keystream
asociado a un IV, se puede descifrar todas las tramas que usen el mismo IV. El problema es
entonces conocer un mensaje sin cifrar, aunque esto no es tan complicado, porque existen
trficos predecibles o bien, se pueden provocar (mensajes ICMP de solicitud y respuesta de
eco, confirmaciones de TCP, etc.).
2.3.2.6.1.5.2. Sniffing
La antena es preferible que sea de Wireless LAN, pero pruebas con sistemas
metlicos sencillos tambin han permitido practicar sniffing a distancias cortas.
Hay tarjetas y drivers preparados para monitorear la red, son de alto costo.
Con tarjetas de bajo costo sobre Linux se pueden hacer modificaciones para captar
todo el trfico.
Un problema de algunas tarjetas de bajo costo es que deben pedir franja temporal y
darse de alta en el AP y podran ser detectadas, pero esto se soluciona modificando
drivers o controladores.
Se identifican por la clave compartida con el AP. WEP no utiliza estados anteriores,
esto permite reemplazar estaciones o realizar ataques de DoS. Tambin es posible realizar
ataques de repeticin, volviendo a enviar paquetes capturados, que sern descifrados
correctamente, si se descubre la clave, la estacin intrusa tiene acceso a la red LAN como si
tuviera clave.
Por 2 extremos: Utilizando una mquina desde Internet se puede generar trfico que
luego sea cifrado por el AP hacia las estaciones inalmbricas.
M1 + S = C1
IV
S
RC4
K
M2 + S = C2
C1 + C2 = M1 + M2
Fluhrer, Mantin y Shamir descubrieron en agosto del 2001 una debilidad del RC4.
Se utiliza nicamente el primer byte generado por la secuencia pseudoaleatoria con el
objetivo de obtener la clave de encriptacin. Tambin en agosto del 2001, Stubblefield,
Ioannidis y Rubin implementaron un sistema prctico y barato para conseguir la clave con
la vulnerabilidad del RC4. Consiguieron la clave en 2 tipos de experimentos con:
La velocidad mxima que permite es de 11 Mbps. Para cada bit, se enva el XOR de
l y de n bits aleatorios (chipping code), esta es la denominada secuencia pseudo aleatoria
de ruptura o Pseudo-Random Numerical Barker Secuence.
Como resultado tenemos una expansin del ancho de banda original y una ganancia
de proceso de 10.4 dB.
Observando la Tabla 2.5 y la Figura 2.26, se observa que si se desea operar con
varias redes inalmbricas en la misma rea y que no ocurra ningn tipo de interferencia
entre ellas, deben estar separadas por al menos 5 canales de diferencia, por lo que, como se
aprecia en la Figura 2.27, el mximo de redes concurrentes es de 3, con redes situadas en
los canales 1, 6 y 11, es decir, los canales extremos y el canal central.
La otra limitacin importante del estndar son los niveles mximos de potencia.
Esto reduce considerablemente la distancia mxima de los radio enlaces. Como se observa
en la Tabla 2.6.
Para que una red Inalmbrica se considere segura, debe contar con la existencia de
mecanismos de autentificacin en doble va, es decir el usuario debe verificar que se est
conectando a la red correcta y a su vez la red debe constatar que el usuario est autorizado y
en segundo lugar la data debe viajar cifrada por el aire para evitar escuchas pasivas. Cada
mtodo logra un nivel diferente de seguridad, es decir cada uno de ellos presenta ventajas y
desventajas, entre ellos se encuentran:
Este mtodo se basa en el uso de la tabla de datos que contenga las direcciones
MAC (Media Access Control) de las tarjetas de red inalmbrica que estn autorizadas para
conectarse al punto de acceso. Como posibles desventajas se puede mencionar que puede
95
ser complicado al momento de autorizar o no autorizar a un equipo hay que editar las tablas
de direcciones de cada uno de los puntos de acceso, si fuese muchos los puntos de acceso o
el nmero de equipos pudiese ser no prctico, por otro lado el formato de la direccin MAC
puede conllevar a cometer errores, la mayora de las veces el formato es de 6 bytes en
hexadecimal, en cuanto al momento de la transmisin de los datos, los mismos no van
cifrados por lo que cualquier atacante puede capturar las direcciones MAC de los usuarios
registrados con el empleo de un sniffer para luego asignarle a su propia tarjeta una
direccin MAC vlida para la red, usando programas como AirJack, WellenReiter, entre
otros. Al no estar cifrada la data no hay garanta de confidencialidad de informacin al
momento de la transmisin. La red puede ser an ms vulnerable en los casos de robos de
equipos inalmbricos de algn usuario o del punto de acceso.
Una red privada virtual (VPN) es la que emplea tecnologas de cifrado para crear un
canal virtual privado sobre una red de uso pblico. Las VPN resultan especialmente
atractivas para proteger redes inalmbricas, debido a que funcionan sobre cualquier tipo de
hardware inalmbrico y superan las limitaciones que tiene WEP. Para configurar una red
inalmbrica utilizando las VPN, debe comenzarse por asumir que la red inalmbrica es
insegura. Esto quiere decir que la parte de la red que maneja el acceso inalmbrico debe
estar aislada del resto de la red, mediante el uso de una lista de acceso adecuada en un
enrrutador, o agrupando todos los puertos de acceso inalmbrico en una VLAN si se
emplea switching. Dicha lista de acceso y/o VLAN solamente debe permitir el acceso del
cliente inalmbrico a los servidores de autorizacin y autenticacin de la VPN. Deber
permitirse acceso completo al cliente, slo cuando ste ha sido debidamente autorizado y
autenticado. En la Figura 2.28 se muestra una estructura de VPN para tener el acceso
inalmbrico de manera segura donde se encuentra un servidor de autorizacin,
96
2.3.1.4. 802.1X
El suplicante, o equipo del cliente, que desea conectarse con la red. El servidor de
autorizacin/autentificacin, que contienen toda la informacin necesaria para saber cules
equipos y/o los usuarios estn autorizados para acceder a la red. (802.1X fue diseado para
emplear servidores de RADIUS (Remote Authentication Dial-In User Service), cuya
especificacin se puede consultar en la RFC 2058. Estos servidores fueron creados
inicialmente para autenticar el acceso de usuarios remotos por conexin va telefnica, dada
su popularidad se opta por emplearlos tambin para la autenticacin en las LAN.
esta clave dinmica peridicamente (por ejemplo cada cinco minutos), para evitar el ataque
de rompimiento de la clave descrito anteriormente en la seccin referente a WEP.
Existen varias variantes del protocolo EAP, segn modalidad de autenticacin que
se emplee. Se puede hablar de dos grupos de variantes: Las que emplean certificados de
seguridad y las que utilizan contraseas.
2.3.1.5.1. EAP-TLS
2.3.1.5.2. EAP-TTLS
2.3.1.5.3. PEAP
2.3.1.6.1. EAP-MD5
2.3.1.6.2. LEAP
2.3.1.6.3. EAP-SPEKE
WPA es un estndar propuesto por los miembros de la Wi-Fi Alliance (que rene a
los grandes fabricantes de dispositivos para WLAN) en colaboracin con IEEE. Este
estndar busca subsanar los problemas de WEP, mejorando el cifrado de datos y
ofreciendo un mecanismo de autenticacin. Para solucionar el problema de cifrado de
datos, WPA propone un nuevo protocolo de cifrado, conocido como TKIP (Temporary Key
Integrity Protocol). Este protocolo se encarga de cambiar la clave compartida entre el punto
de acceso y cliente cada cierto tiempo para evitar ataques que permitan revelar la clave.
Igualmente se mejoraron los algoritmos de cifrado de trama y de generacin de los IVs,
con respecto a WEP. El mecanismo de autenticacin usado en WPA emplea 802.1X y EAP.
Modalidad de red casera, o PSK (Pre-Shared Key): WPA opera en esta modalidad
cuando no se dispone de un servidor de RADIUS en la red. Se requiere entonces introducir
una contrasea compartida en el punto de acceso y en los dispositivos mviles cuya
contrasea coincida con la del punto de acceso. Una vez logrado el acceso, TKIP entra en
funcionamiento para garantizar la seguridad del acceso. Se recomienda que las contraseas
empleadas sean largas (20 o mas caracteres), porque ya se ha comprobado que WPA es
vulnerable a ataques de diccionario, si se utiliza una contrasea corta.
2.3.4. Tecnologas V5
Un interfaz V5.1 est formado por slo un enlace E1, cuyos slots de tiempo estn
estticamente asignados a los puertos de usuario PSTN y RDSI, por lo que este tipo de
interfaz no soporta concentracin. En cambio, un interfaz V5.2 puede llegar a estar formado
por un mximo de 16 enlaces E1. El nmero de enlaces del V5.2 es configurado por el
operador de red. En un interfaz V5.2 los slots de tiempo se asignan dinmicamente llamada
a llamada.
Los timeslots 16 de los E1 se utilizan para transmitir los mensajes especficos de los
protocolos de V5, tambin llamados datalinks, C-paths o C-Channels. En caso de que haya
varios E1, slo uno de los C-Channels est activo. El resto quedan en stand-by y pasaran a
activos en caso de fallo o por comandos de bloqueo.
Un interfaz V5 entre un nodo de acceso y una central suele constar de dos E1, uno
configurado como primario y otro como secundario. Normalmente, el primario es el activo
y el secundario est en reposo (stand-by) y se activa en caso de fallo de nivel 1 del primario
o por un comando de bloqueo.
Los comandos de bloqueo pueden ser forzados, es decir, el enlace cae y se cortan las
llamadas que est cursando; o bien diferidos, en cuyo caso, la central no deja realizar ms
llamadas utilizando el enlace bloqueado y espera a que acaben las que se estn cursando
antes de bloquear el interfaz.
2.3.3.1. Protocolos de V5
Estos protocolos son los cinco que forman la suite de protocolos V5.2. El V5.1 slo
tiene los dos ltimos, el PSTN y el Control Protocol. Los nmeros entre parntesis indican
el identificador de datalink (EF) en cada paquete visto en un analizador de protocolos V5.
Este analizador de protocolos se puede utilizar para monitorizar los mensajes V5 en los dos
timeslots 16 de un V5.
106
En el caso del V5.2, los mensajes del Control Protocol, el Link Control Protocol, el
BCC Protocol y, si se configura (normalmente s, PG1), el Protection Protocol, se
transmiten siempre juntos por el timeslot 16 del E1 configurado como activo (normalmente
el primario). Los otros protocolos pueden asignarse a los timeslots 15, 16 o 31 de
cualquiera de los otros E1 que componen el interfaz V5.2. El timeslot 16 del E1 secundario
tambin transporta mensajes del Protection Protocol y se reserva como C-Channel de
respaldo para el timeslot 16 del E1 con el C-Channel activo.
2.3.3.2. Funcionamiento de V5
Puesto que un interfaz V5.2 consiste en mltiples enlaces E1, existe la necesidad de
asignar un identificador a cada uno para poder ejecutar comandos de bloqueo (por ejemplo,
para deshabilitar un E1 por cuestiones de mantenimiento) y para verificacin del estado
operacional de un E1. El identificador de enlace (link Id) es un nmero de 24 bits.
Cuando un puerto de usuario est bloqueado, no se podrn generar llamadas por ste
ni ser posible terminarlas, debiendo notificarse el error como si fuera un fallo de LE de
acuerdo con las normas en uso.
Las normas ITU-T: G.964 (V5.1), G.965 (V5.2) y los estndares ETSI: ETS 300
324-1 y ETS 300 324-2 para V5.1 y ETS 300 347-1 (V5.2), agrupan toda informacin
detallada de los protocolos V5. [9]
108
CAPTULO III
Para el desarrollo de este proyecto piloto se tiene planificado tomar una muestra
estructural de tres parcelas (Parcelas 20, 22 y 23), estas parcelas se muestran en la Figura
3.2, las cuales se encuentras localizadas geogrficamente en la parte sur de la urbanizacin
(sealada con un elipse rojo en la Figura 3.1) de manera consecutiva, distribuidas cada una
de la manera siguiente:
Parcela 20
Parcela 22
Parcela 23
Los edificios que componen estas parcelas tienen cada uno 5 pisos (incluyendo la
planta baja) y cuenta cada piso con 6 apartamentos de 54 m2, lo cual representa un total 450
apartamentos en cuestin para el desarrollo del proyecto piloto.
110
CANTV Listo o Habla Ya, similar al CANTV Fijo con la diferencia de que se
ofrece en aquellas localidades o zonas geogrficas donde no existe factibilidad de
lneas fijas CANTV, los nmeros telefnicos utilizan cdigo de rea local y poseen
servicios de valor agregado tales como servicio de identificador de llamadas y
suscripcin al servicio de mensajera de texto, todo esto mediante el uso de
terminales inalmbricos ajustados a la norma ITU IS-2000 a travs de la Red
CDMA 1xRTT de Movilnet, donde el servicio esta restringido geogrficamente a la
direccin de instalacin suministrada por el cliente .
CANTV ABA, es un servicio de acceso a banda ancha que funciona sobre una
tecnologa de Lnea de Abonado Digital Asimtrica (ADSL) en modalidad de
postpago con cargo directo a la factura telefnica, que permite a CANTV
aprovechar la infraestructura sobre la que actualmente funciona el servicio
telefnico (Pares de cobre), para ofrecer acceso a Internet a velocidades bastante
superiores a las de acceso discado. En la Figura 3.3, se muestra el esquema de la
red ABA de CANTV.
CANTV Cliente
Internet
Router DSLAM PC
Firewall
Par de Cobre
Spliter Filtro
PSTN Switch
Telfono
INTERNET
INTERNACIONAL
NAT
NACIONAL
PDSNs
EVDO RNC
Cluster 1
ATM Backbone
Cluster 4
Cluster 2 Cluster 3
Intercable Cliente
Red HFC
Receptores
Spliter Set Top Box
Tv Broadcast
Codificadores Moduladores y
Transmisores
Televisor
Urbalink por su parte, opera una red de puntos de acceso Wi-Fi denominada
Hot Spots Venezuela. La empresa brinda toda la infraestructura de tecnologa,
comercializacin y soporte necesaria para la instalacin y manejo de los hot
spots. Hasta la fecha, cuentan con 25 hot spots creados en distintas zonas de
Caracas y en centros comerciales. Su esquema de comercializacin se basa en
una suscripcin que permite al usuario conectarse en cualquiera de los sitios
afiliados a la red de HotSpots Venezuela. Segn informacin obtenida en Wi-Fi
Alliance, los hot spots de Urbalink soportan los estndares 802.11 b y g.
Para las Parcelas 20, 22 y 23, se tiene una tanquilla comn, como se muestra en la
Figura 3.6, que permite el acceso la interconexin al anillo del equipo concentrador de
abonados.
La seccin secundaria, que esta conformada por el cableado sale desde las regletas
de conexin secundaria del concentrador, el tendido areo sobre los postes telefnicos (se
utilizan dos cables troncales y mangas de empalme), lo cual permite interconectar el equipo
concentrador de abonados hasta los 15 edificios donde respectivamente esta instalado el
cajetn terminal de CANTV, como se detalla en las Figuras 3.7 y 3.8.
Cada edificio cuenta con cajetn de acceso al FXB, en el cual se tiene acceso al
cable multipar nivel 3 que internamente por acometidas llega hasta cada uno de los
apartamentos a un solo cajetn base o roseta telefnica con un conector hembra RJ-11 para
conectar un equipo terminal o POTS.
CAPTULO IV
LA RED DE MOVISTAR
Para el caso especfico de los servicios de voz, Movistar Venezuela cuenta con
Centrales Telefnicas EMX-2500 de Motorola, 5ESS de Lucent, AXE/ ANS de Ericsson y
Surpass de Siemens las cuales se encuentran actualmente en produccin comercial; sin
embargo para el sector de telefona fija se estn utilizando las centrales Ericsson AXE/ANS
y Siemens Surpass, debido a que solamente estas centrales tienen activas las
funcionalidades para ISDN.
Costo Efectivo.
Flexibilidad de las Aplicaciones.
Caractersticas de Desarrollo e Integracin.
Presencia en el Mercado Local.
Tiempo de entrega.
Relacin Comercial con Movistar.
Posicionamiento en los mercados internacionales.
Posibilidad de compra y garanta.
Servicios de soporte.
En la Tabla 4.1 se encuentran los productos evaluados para DLC y ADSL con su
proveedor respectivo.
Una vez disponibles los recursos en la centrales locales (AXE y Surpass Siemens),
se realiz la revisin del anlisis de dgitos y enrutamiento de llamadas, donde se determin
que es el mismo proceso que se lleva a cabo cuando se realiza una llamada originante o
terminante en un suscriptor V5.2.
CAPTULO V
Las tarifas que se aplicarn para el servicio de voz sern las mismas que se
utilizan hoy en da para la telefona fija residencial o comercial CDMA, e igualmente
para el caso del servicio ADSL, las tarifas y planes de Internet banda ancha sern iguales
a las aplicadas actualmente en la red WLL.
Para entender mejor esta idea, se muestra la grfica de la Figura 5.1, donde para la
transmisin de voz desde el DLC hasta la central se utiliza el protocolo V5.2 y para el
transporte de los datos se emplean E1s G.703. Cabe sealar, que no es posible utilizar un
mismo E1 para transportar voz y datos simultneamente.
E1 G.703
E1 G.703
ADSL
Convertidor Cable
FE-E1 multipar
FE nivel 3
Cableado FXB del
Router edificio
BRAS
Par de
cobre
Gestor
ADSL MODEM
CORE IP / ADSL
Internet
Lnea de vista con alguna estacin o radio base Movistar, para el enlace
microondas de ltima milla.
Presencia de toma elctrica AC y barra de tierra o ductera para pasar el cableado
de tierra hacia la barra.
Ubicacin de la
Sala de Equipos
AWG Canalizacin
Circuitos VAC Interruptores
Calibre
Alumbrado Interno 110 1 20 A 2 x 12
Alumbrado Externo 110 1 20 A 2 x 12
Tomacorrientes TUG 110 4 20 A 2 x 12
Tomacorrientes TUG 220 4 30 A 3 x 10
Balizaje de la Torre 110 1 20 A 3 x 12
Aire Acondicionado 220 1 30 A 3 x 10
Finalmente la torre, este elemento es donde va colocada la antena del radio enlace
y por normas de aeronutica civil, sus tramos (de 2 m) deben ser pintados en rojo uno y
blanco el siguiente, adicionalmente cada 20 m debe contar con una lmpara de balizaje.
Es muy importante, la instalacin de un pararrayos en la punta de la torre, y esta debe
contar con aisladores especiales para la bajada de la lnea de tierra, con una separacin
mxima de 1.5 m entre soportes, lo mas recto posible facilitando la descarga a tierra.
130
Para el clculo del radio enlace PDH, inicialmente se realiz la verificacin visual
de la lnea de vista desde el sitio seleccionado para la instalacin de la sala de equipos y
alguna estacin de Movistar, y se encontr lnea de vista directa hacia el sur con la
Estacin de Movistar Aguacates, como se muestra en la Figura 5.5.
Ciudad Casarapa"
Estacin Aguacates
Latitud 10 27 50.36 N y Longitud 66 35. 32.73 W. Una vez introducidos los datos
de coordenadas en el Mdulo Terrain Data del Programa PathLoss, fue generado un
perfil topogrfico mostrado en la Figura 5.7, tomando como fuente de entrada directa los
datos de elevacin y distancia de las tablas de digitalizacin de mapas topogrficos
cargados en las base de datos del sistema.
Es importante aclarar que durante el momento que se realiz el clculo del enlace
no se realizo un estudio de interferencias (esta prueba consiste en realizar en lo extremos
del enlace un barrido de frecuencias mediante un analizador de espectro y una antena
porttil), debido a que no se cuenta con las herramientas necesarias para realizar las
pruebas, esta prueba es imprescindible realizarla antes de implementar el radio enlace.
133
1200
1100
1000
900
Elevation (m)
800
700
600
500
400
300
0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5
Path length (5.72 km)
Aguacates Frequency (MHz) = 13000.0 Ciudad Casarapa
Latitude 10 24 47.00 N K = 0.78, 1.33 Latitude 10 27 50.36 N
Longitude 066 36 05.00 W %F1 = 60.00, 100.00 Longitude 066 35 32.73 W
Azimuth 9.88 Azimuth 189.88
Elevation 1080 m ASL Elevation 371 m ASL
Antenna CL 20.0 m AGL Antenna CL 20.0 m AGL
Mar 14 06
o Regleta telefnica KRONE (10 pares): Estas regletas forman parte del
sistema EDA, ya que en las mismas se conectan los pares de cobre
provenientes de las regletas 110 y a la vez se insertan los mdulos o
137
Regleta Espejo Voz: A esta regleta intermedia llegan los pares de cobre
(cable multipar) provenientes del filtro del DSLAM. En esta regleta se
tienen pares de cobre que transportan solamente el servicio de voz.
I F S F Hacia clientes
P I W E
- con voz y datos
L I /
D
T T E
S
R C 1 Regleta espejo - voz
L
A O H
M
LAN LAN Conexin de
clientes hacia DLC
Regleta DLC
Hacia Balum / Radio
importante sealar que para la conexin del sistema de ADSL, se necesita instalar del
lado MTSO un convertidor FastEthernet - E1, el cual toma la seal del E1 G.703
proveniente del sitio remoto y la convierte nuevamente a FastEthernet, para conectarla al
Router BRAS del CORE-IP.
suscriptor, una regleta de voz y datos, una regleta espejovoz y una regleta DLC. Para
450 suscriptores se requiere una cantidad total de 1350 pares disponibles, para esto es
necesario realizar la instalacin de siete (7) shelves de o bandejas preensambladas de
18,44 equipadas con 200 regletas Krone, lo cual representa 1400 pares disponibles.
Shelves de
Regletas Krone
Rack de
19
El sistema de DLC Alcatel Litespan 1540, esta compuesto por 4 shelves que
pueden alojar hasta diez (10) tarjetas de 32 puertos para POTS que permiten instalar
hasta 2556 POTS interconectados con un mximo de quince (15) E1s (G.703) hasta la
central de conmutacin. Para este diseo es necesario realizar la instalacin de dos (2)
shelves equipados con 15 tarjetas POTS, lo cual representa 480 POTS disponibles
median el uso de siete (7) E1s desde la urbanizacin Ciudad Casarapa hasta el MTSO-
Colgate.
Sistema Consumo
DLC Alcatel Litespan 188 w
ADSL EDA 455 w*
Radio Nera FlexLink 46 w
Total 689 w
* Potencia total del proyecto basado en un consumo de 65 w por siete (7) IP-
DSLAM
CAPTULO VI
A diferencia de las redes por cableado fsico, en las WLAN no se puede visualizar
el medio inalmbrico. La construccin de una instalacin y las fuentes silentes de
interferencia impactan la propagacin de las ondas de radio, a menudo en formas
extraas. Esto dificulta la habilidad que se tenga para planificar la localizacin de los
puntos de acceso en el emplazamiento de una red.
150
o Transformadores.
o Hornos de microondas.
Antes de instalar la red, es importante llevar a cabo una inspeccin del lugar para
asegurar que las reas a cubrir pueden obtener la velocidad de transmisin requerida, no
obstante las variables ambientales mencionadas. Para instalaciones de Wi-Fi en edificios
requiriendo cubrir mltiples pisos, la inspeccin del lugar debe incluir mediciones tri-
dimensionales.
las comunicaciones va correo electrnico y chat. [19]. En la Figura 6.3 se detallan las
diversas tareas que realizan los usuarios de Internet en Venezuela.
Los edificios no cuentan con un rea comn en el interior, que pudiera servir
como cuarto de equipos donde se pudiera instalar un punto de acceso. Es por ello que
proponemos que se utilicen unidades externas (outdoor) colocadas en postes, localizadas
de manera de brindar cobertura a dos edificios cada una.
Zona de Cobertura CH 11
Debemos tener en cuenta que a medida que se esta ms lejos del AP, la velocidad
disminuye, sin embargo, se tiene al principio una velocidad de 11 Mbps y esta va
disminuyendo a 1 Mbps, dicha velocidad todava es mejor que un enlace DSL o Dial-Up,
as que, si el usuario solo esta revisando E-mail o navegando en Internet el desempeo
sera satisfactorio.
Cada Cliente debe tener una tarjeta PCI o PCMCIA conectado en su computadora
de escritorio o porttil, segn sea el caso. Si hay problemas con la seal, tambin
podemos instalar un adaptador de red inalmbrica que tenga conector para antena
externa.
AP BASE
WEP2
EAP
EAP-TTLS
LEAP
RADIUS
EAP-TLS
TKIP
802.1X
VPN 802.11i
AES
Con relacin a los productos para redes inalmbricas, en la actualidad hay un gran
nmero de compaas en el pas que comercializan equipos para redes Wi-Fi.
Para evaluar los productos es importante identificar las necesidades del cliente y
asegurarse de que la seleccin de equipos cumpla con todos los requisitos tcnicos. En la
tabla 6.1 se encuentran los fabricantes y productos evaluados para Wi-Fi.
Costo.
Asistencia.
Tiempo de entrega.
6.2.1. D-Link
Prestaciones
Instalacin y Uso:
Administracin:
Seguridad:
En las tablas 6.2, 6.3 y 6.4 se encuentran las especificaciones de los equipos de la
serie DWL.
Tabla 6.2: Especificaciones Tcnicas de los AP DWL-2700AP.
6.2.3. Cisco
Los equipos Cisco son distribuidos en Venezuela por Cisco Systems Venezuela.
De ste proveedor fueron evaluados los puntos de acceso / puentes outdoor de la serie
Cisco Aironet 1300, las tarjetas PCI para computadores de mesa Cisco Aironet
802.11a/b/g Wireless PCI Adapter y los adaptadores para porttiles Cisco Aironet
802.11a/b/g Wireless Cardbus Adapter. A continuacin se detallan las caractersticas
generales que ofrece dicha solucin:
Prestaciones:
Disponible con antena integrada u opcionalmente con antenas externas para una
gran flexibilidad en sus aplicaciones.
Instalacin y Uso:
Administracin:
El WLSE, como componente del Cisco SWAN, est disponible como herramienta
de gestin para la serie 1300. Posee una interfaz de gestin basada en HTML. Usa SNMP
y Secure Shell (SSH)/Secure Sockets Layer (SSL) para gestionar los puntos de accesos y
puentes de la serie 1300 a travs de una interfaz web.
La serie Cisco Aironet 1300 Series soporta los estndares 802.11b y 802.11g,
proporcionando tasas de transferencia de hasta 54 Mbps con una tecnologa fiable y
segura. Certificado Wi-Fi.
Seguridad:
Ofrece a los administradores de la red la confianza de que los datos de sus redes
permanecern privados y seguros. La solucin soporta WPA, WPA2. Slo a clientes
legtimos se les permite asociarse con sus servidores RADIUS legtimos a travs de los
APs autorizados.
En las tablas 6.5, 6.6 y 6.7 se detallan las especificaciones tcnicas de los equipos
que componen sta solucin.
Tabla 6.5: Especificaciones Tcnicas de los Puntos de Acceso / Puentes Cisco Aironet 1300.
Tabla 6.6: Especificaciones Tcnicas de los Adaptadores Cisco Aironet 802.11a/b/g Wireless PCI.
Tabla 6.7: Especificaciones Tcnicas de los Adaptadores Cisco Aironet 802.11a/b/g Wireless CardBus.
PEAP, TKIP
Cumplimiento de normas ETSI, VCCI, EN 60950, ICES-003, IEC 60950,
UL 60950, CSA 22.2 No. 60950, EN 301.489.1,
EN 301.489.17, AS/NZ 3548 Class B, TELEC
33a, TELEC Std 66, RSS-210, RSS-102
Software incluido Controladores y utilidades
Sistema operativo requerido Microsoft Windows 2000 / XP
Servicio y mantenimiento 1 ao de garanta
Detalles de Servicio y Mantenimiento Garanta limitada - 1 ao
Temperatura mnima de funcionamiento 0 C
Temperatura mxima de funcionamiento 70 C
mbito de humedad de funcionamiento 10 - 90%
6.2.4. Aphelion
Prestaciones:
Instalacin y Uso:
Administracin:
Seguridad:
Soporta cliente y servidor Radius, seguridad WPA con TKIP/AES, WEP hasta
152 bits, tipo de autentificacin: sistema abierto / clave compartida, filtrado de MAC.
Tabla 6.8: Especificaciones Tcnicas del Punto de Acceso Externo 802.11a/b/g Aphelion 600AG.
Equipos
Punto de Acceso
DWL-2700AP 600AG Aironet 1300
Outdoor
Adaptador PC
Aironet Wireless PC
Card (para DWL-AG660 10G
Card
porttil)
Adaptador PCI Aironet Wireless PCI
DWL-G120 No dispone
(para desktop) Card
Radio Frecuencia
Banda ISM 2.4-2.4835 GHz ISM 2.4-2.4835 GHz ISM 2.4-2.497 GHz
Codificacin DSS DSS DSS
Tcnica de DBPSK@1Mbps DBPSK@1Mbps DBPSK@1Mbps
Modulacin DQPSK@2Mbps DQPSK@2Mbps DQPSK@2Mbps
CCK@5.5 y 11Mbps CCK@5.5 y 11Mbps CCK@5.5 y 11Mbps
Tasa de
Transferencia
Ajuste Dinmico 11Mbps, 5.5Mbps, 11Mbps, 5.5Mbps, 11Mbps, 5.5Mbps,
2Mbps, 1Mbps 2Mbps, 1Mbps 2Mbps, 1Mbps
Modo de
Half Duplex Half Duplex Half Duplex
Transmisin
Acceso al Medio CSMA/CA CSMA/CA CSMA/CA
Modos de
Operacin (AP)
Punto a Punto Si Si Si
Infraestructura Si Si Si
64-, 128-, 152-bit 64-, 128-, 152-bit 128-bit WEP en modo
Encriptacin
WEP WEP Bridge
Open System / Shared
Autenticacin IEEE 802.1x IEEE 802.1x
Key
Software
FCC Clase B Si Si Si
Marca CE Si Si Si
UL Si No Si
CSA Si No Si
Garanta Si Si Si
Sistemas
Operativos
Windows 95/98/98SE/200/
No Especifica No Especifica
ME/NT/XP/CE
176
La solucin escogida fue la presentada por Cisco por las siguientes razones:
Costo: A pesar del que el costo de los equipos Cisco Aironet es mayor al
de los productos D-Link y Aphelion, sus bondades tcnicas son superiores
y se escoge por las razones expuestas anteriormente.
Las cualidades de los productos Cisco de la serie Aironet 1300 proporcionan las
siguientes ventajas a los clientes:
(1)
180
Ahora, para una antena receptora se tiene que la recepcin isotrpica es:
(2)
(3)
(4)
(5)
Es comn encontrar la expresin (5) en forma tal que pueda ser trabajada con
otras unidades, como kilmetros, pies, millas, o Megahertz. Simplemente se trabajan los
factores de conversin adecuadamente, y sumando las constantes que aparecen al realizar
esa operacin. Para ilustrar esto ltimo, se tienen por ejemplo las siguientes frmulas:
181
(6)
(7)
Para el caso de un punto de acceso operando en el canal 1 (2.412 MHz) con una
antena externa conectada a travs de un cable 30 metros de longitud, se tiene que las
prdidas de espacio libre seran de 69,64 dB.
La sensibilidad de las NIC a 11 Mbps es de -90 dBm (ver anexo) y la potencia del
transmisor es de 20dBm a 1, 2, 5.5 y 11Mbps.
20
5
5.2
69.64
0
0
-90
Sustituyendo los valores en la frmula (9), se tiene que Potencia Recibida ser de
-49,44dBm, por lo que el Margen de Operacin del Sistema ser de 40.56 dB.
Power Injector
Conectores RJ-45
Postes de 20 metros
CONCLUSIONES Y RECOMENDACIONES
Conclusiones
Este diseo de red fue realizado en base a la necesidad de brindar a los residentes
de la urbanizacin Ciudad Casarapa, servicios de telecomunicaciones de telefona
fija e Internet de banda ancha con Movistar, utilizando la infraestructura de planta
externa (tendido de par de cobre) de CANTV, dentro del marco legal otorgado
por la Ley Orgnica de Telecomunicaciones del 2000, para la apertura de
telecomunicaciones en materia de Vas Generales de Telecomunicaciones.
Recomendaciones
Es importante que todos los cables estn conectados debidamente y seguros antes del
encendido del sistema, para esto se recomienda que durante el proceso de
implementacin del proyecto, especficamente en las actividades de instalacin,
cumplir con las normas ISO/IEC 11801 para Cableado Genrico en Instalaciones de
Usuario, ANSI/TIA/EIA 569-A para Canaletas y Espacios, ANSI/TIA/EIA 758 para
Cableado de Planta Externa y ANSI/TIA/EIA 607 para Apantallamiento y Puesta a
Tierra.
REFERENCIAS
[2] Van Bosse, J. (1998) Signaling in Telecommunications Networks. 549 p.p. Wisley-
Interscience. Canada.
[15] Dayem, Rifaat A. (1997). Mobile Data & Wireless LAN Technologies. Prentice
Hall. USA.
[18] Henner, I. y Per T. (1999) Planning of line of sight radio relay systems.193 p.p. Nera
Telecommunications. Bergen.
[20] International Telecommunication Union. (Sin Fecha) Rain zone contour maps
Recommendation G.837-1. 6 p.p.
190
[24] Programa de las Naciones Unidas para el Desarrollo. (2001) PNUD y La Tecnologa
de la Informacin y las Comunicaciones (TIC). [Documento en Lnea]. Consultado el da
25 de marzo del 2004 de la World Wide Web: http://www.pnud.org.ve/idhn_2002/cap-
3.pdf
[26] Universidad Catlica Andrs Bello. (Sin Fecha) Ejemplos de las Normas APA.
[Homepage]. Consultado el da 2 de abril del 2005 de la World Wide Web:
http://academia.ucab.edu.ve/paginas/mostrar.php?id_link=2844&id_materia=458
iii
GLOSARIO
Actualizar
Sustituir el software o firmware existente con una versin ms moderna.
Ad Hoc: Una WLAN bajo topologa "Ad Hoc" consiste en un grupo de equipos que
se comunican cada uno directamente con los otros a travs de las seales de radio sin
usar un punto de acceso. Comunicaciones de tipo punto-a-punto. Los equipos
inalmbricos necesitan configurar el mismo canal y SSID en modo "Ad Hoc".
BER: (Bit Error Rate). Tasa de error de bit. Constituye una medida de la calidad de
la transmisin digital.
Cancelacin del eco: Cuando se transmite una seal, parte de su energa es reflejada
en el destino como consecuencia de una desadaptacin de impedancias. Esta porcin
de seal reflejada se denomina eco. La cancelacin del eco consiste, pues, en el
proceso necesario para eliminar los efectos de la indeseada seal de eco.
Cancelador de eco: Dispositivo que, a travs del filtrado adaptativo, minimiza el eco
de una comunicacin vocal a la vez que mantiene su carcter full-dplex.
compensar los efectos negativos del canal y adaptar el formato de la misma para que
su transmisin por dicho canal sea lo ms eficiente posible.
Congestin: Situacin que acontece en una red cuando sta resulta incapaz de
aceptar ms informacin. Suele ocurrir cuando las colas de los routers de la red se
saturan.
Control de la congestin: Tcnicas que definen el modo en que los nodos de la red
deben extraer los paquetes de sus colas de transmisin.
CTS (Limpiar para enviar): Seal enviada por un dispositivo para indicar que est
preparado para recibir datos.
Direccin IP: un nmero nico de 32 bits para una mquina TCP/IP concreta en
Internet, escrita normalmente en decimal (por ejemplo, 192.168.1.1).
DLC: (Digital Loop Carrier). Tecnologa que mediante el uso de tcnicas digitales,
permite un amplio rango de servicios a los usuarios que poseen lneas de par trenzado
de cobre.
E1: Conexin por medio de la lnea telefnica que puede transportar datos con una
velocidad de hasta 1,920 Mbps. Segn el estndar europeo (ITU), un E1 est formado
por 30 canales de 64 kbps. E1 es la versin europea de T1 (DS-1). Velocidades
disponibles:
E1: 30 canales, 2.048 Mbps
E2: 120 canales, 8.448 Mbps
E3: 480 canales, 34.368 Mbps
E4: 1920 canales, 139.264 Mbps
E5: 7680 canales, 565.148 Mbps
Eco: (Echo). Porcin de la seal transmitida que vuelve al emisor junto con la seal
del otro extremo o en ausencia de ella.
Eco elctrico: Fenmeno producido por las reflexiones que sufre la seal en el
extremo receptor debido a una desadaptacin de impedancias.
Enrutador: Dispositivo de red que conecta redes mltiples, tales como una red local
e Internet.
Enrutamiento esttico: Reenvo de datos de una red a travs de una ruta fija.
ERL: (Eco Return Loss). Prdidas de retorno que sufre la seal de eco y que
aseguran que su nivel no sobrepasa un cierto lmite.
Erlang: (Erlang). Unidad estndar para la medida del trfico telefnico, careciendo
de medida. Un Erlang de carga indica la ocupacin continua -al 100 por 100- de un
circuito telefnico.
Finger: Programa que le facilita el nombre asociado con una direccin de correo
electrnico.
Frase secreta: Se utiliza con mucha frecuencia como una contrasea, ya que una
frase secreta simplifica el proceso de cifrado WEP generando de forma automtica
las claves del cifrado WEP para los productos Linksys.
G.728: Codec de audio LD-CELP a 16 kbps. Se caracteriza por una calidad media de
la voz, consumo de ancho de banda media y alta carga del procesador mnima debida
a la compresin.
G.729: Codec de audio CELP a 8 kbps. Se caracteriza por una calidad media de la
voz, consumo bajo ancho de banda y alta carga del procesador.
Gateway: En general se trata de una pasarela entre dos redes. Tcnicamente se trata
de un dispositivo repetidor electrnico que intercepta y adecua seales elctricas de
una red a otra.
Hot Swap: Retirar un componente de un sistema e introducir uno nuevo sin apagarlo
y mientras el sistema sigue funcionando con normalidad. En los sistemas redundantes
es posible hacerlo con muchos de sus componentes: discos, tarjetas, fuentes de
alimentacin, en general con todos aquellos componentes que hayan sido duplicados
dentro del sistema.
Hot Spot: Punto de Acceso generalmente localizado en lugares con gran trfico de
pblico (estaciones, aeropuertos, hoteles) que proporciona servicios de red
inalmbrica de banda ancha a visitantes mviles.
LAN - (Local Area Network): Red de comunicaciones que cubre un rea limitada de
aproximadamente seis millas (9,6 Km) de radio, con velocidades de transferencia de
datos que van de moderadas a altas. Los computadores que se encuentran dentro de
una red LAN, deben estas in el mismo edificio, o en un edificio prximo al mismo.
MIMO: Multiple Input Multiple Output. Tecnologa que simula el uso de varias
antenas en nuestro dispositivo. Es compatible con cualquier dispositivo 802.11b/g y
permite trabajar con cada uno a la mxima velocidad que soporte.
Mdem de cable: Un dispositivo que conecta una equipo a la red de la televisin por
cable que a su vez se conecta a Internet.
MCU: (Multipoint Control Unit). Punto final que soporta tres o ms terminales y
pasarelas en una nica conferencia multipunto.
Puente (Bridge): Dispositivo que conecta dos tipos diferentes de redes locales, como
por ejemplo una red inalmbrica a una red Ethernet con cable.
Red Troncal: Parte de una red que conecta la mayora de los sistemas y los une en
red, as como controla la mayora de datos.
Retardo: Tiempo empleado por la seal en viajar desde el origen hasta el destino
atravesando los equipos intermedios de la red.
Servidor: Cualquier equipo cuya funcin en una red sea proporcionar acceso al
usuario a archivos, impresin, comunicaciones y otros servicios.
204
SS7: (Common Channel Signaling System N 7). SS7 es un estndar global para
telecomunicaciones definido por la Unin Internacional de Telecomunicaciones
(Sector de Estandarizacin de Telecomunicaciones). Define los procedimientos y
protocolos mediante los cuales los elementos de la Red Telefnica Conmutada (RTC
o PSTN, Public Switched Telephone Network) intercambian informacin sobre una
red de sealizacin digital para establecer, enrrutar, facturar y controlar llamadas,
tanto a terminales fijos como mviles.
T1: Un circuito digital punto a punto dedicado a 1.544 Mbps proporcionado por las
compaas telefnicas en Norteamrica. Ver E1 y J1 para los equivalentes europeos y
japons, respectivamente. Permite la transmisin de voz y datos y en muchos casos se
utilizan para proporcionar conexiones a Internet.
205
VLAN - Virtual Local Area Network: Red de rea Local Virtual. Tipo de red que
aparentemente parece ser una pequea red de rea local (LAN) cuando en realidad es
una construccin lgica que permite la conectividad con diferentes paquetes de
software. Sus usuarios pueden ser locales o estar distribuidos en diversos lugares.
VoIP: (Voice Over IP). Tecnologa que permite la transmisin de la voz a travs de
redes IP, Internet normalmente. La Telefona IP es una aplicacin inmediata de esta
tecnologa.
VPN (Red privada virtual): Medida de seguridad para proteger los datos a medida
que abandona una red y pasa otra a travs de Internet.
Voz sobre paquetes. Prestacin de los servicios tpicos de una red de conmutacin
de circuitos (telefona, fax y mensajera vocal) a travs de una red de datos.
WAN: (Wide Area Network). Una red de comunicaciones utilizada para conectar
ordenadores y otros dispositivos a gran escala. Las conexiones pueden ser privadas o
pblicas.
WPA-Enterprise: Versin de WPA que utiliza las mismas claves dinmicas que
WPA-Personal y tambin requiere que todo dispositivo inalmbrico est autorizado
segn lista maestra, albergada en un servidor de autenticacin especial.
ANEXOS
Alcatel 1540 Litespan
A Multitude of Possibilities in
One Multiservice Access Platform
The Alcatel 1540 Litespan family is a multiservice access-network platform that offers cost-effective narrowband,
broadband and voice over IP (VoIP) services for residential and business applications. This multivendor-compatible
solution supports multiple network topologies and transport options, ensuring a smooth transition from traditional voice
to next generation networking (NGN). The integrated Alcatel 1353 Litespan Management System (LMS) helps to
With the Alcatel 1540 Litespan family, service providers can offer any mixture of revenue-generating services and can
orchestrate the evolution of their networks using the most economically advantageous strategy to meet to their business
objectives. The Alcatel 1540 Litespan family integrates with other products in the Alcatel Open Path to Enhanced
A L C AT E L 1 >
ALCATELS MULTISERVICE ACCESS
NETWORK SOLUTION
The Alcatel 1540 Litespan family is a central Outstanding Multiservice Gateway
element in Alcatel's next generation networking The Alcatel 1540 Litespan family is based on an
(NGN) product portfolio, serving as a multiser- outstanding multiservice access gateway platform
vice access-based media gateway and offering: that offers a unified, flexible, integrated architec-
> Support for any mix of services to rural or ture for a wide variety of network implementations.
urban residential users, small offices/home
offices (SOHOs), small/medium enterprises Integrated Management
(SMEs) and large corporations In addition to the multiservice gateway platform,
> Support for multiple topologies the family includes the integrated Alcatel 1353
(star, tree, point-to-point, ring, and mixed) LMS. Both the Alcatel 1540 Litespan Multiservice
> Readiness for backbone evolution to IP Access Gateway (Alcatel 1540 Litespan) and the
> Support for a variety of technologies, Alcatel 1353 LMS are integrated and tested with
including TDM, synchronous digital hierarchy other Alcatel products to ensure end-to-end NGN
(SDH), ATM, IP and Ethernet solutions.
Video
Internet Ethernet Ethernet
ATM or IP
Edge
Networks
Data 1540 Litespan
Copper Loop Residential and
Access Media Business
Local Gateway
PSTN
Exchange
Alcatel 1353 LMS
Local
ADM
Exchange
n x E1
(Optical Fiber/
HDSL/SHDSL)
SDH Ring
LEX (STM-1/STM-4) Business
ADM 1540 Litespan 1540 Litespan
n x E1
SDH DLC PDH DLC
(Optical Fiber/
HDSL/SHDSL)
n x E1
1540 Litespan SDH DLC PDH DLC
(Optical Fiber/
Exchange Unit Residential and
Business HDSL/SHDSL)
Business
Leased Line
Transport
1540 Litespan Network PDH DLC
PDH DLC Residential
Remote Unit
> 2 A L C AT E L
THE ALCATEL 1540 LITESPAN FAMILY has taken a leading position
as an access network solution. A September 2004 study by RHK Inc.
reported that the Alcatel 1540 Litespan is the leader in the ETSI digital
loop carriers (DLC) market (29 percent). The Alcatel 1540 family is
in operation in more than 30 countries worldwide. More than 14.5
million equivalent lines have already been delivered plain old
telephone system (POTS), integrated services digital network (ISDN),
leased lines and digital subscriber line (DSL).
Huawei
Alcatel 27%
29%
Lucent
11%
Others
9%
UTStarcom Marconi
4% AFC 9%
Siemens
4% 7%
A L C AT E L 3 >
WHAT THE ALCATEL 1540
LITESPAN FAMILY OFFERS
The Alcatel 1540 Multiservice Capabilities for Support of Multiple Transport
Litespan implements Increased Revenue Generation Options for Easy Integration
key state-of-the-art The flexible, multiservice capabilities of the with Existing Networks
technologies in Alcatel 1540 Litespan solution expand the service The Alcatel 1540 Litespan integrates plesiochro-
addition to TDM, providers revenue-generating capability. In nous digital hierarchy (PDH) or SDH transport
including any DSL addition to providing basic narrowband voice mechanisms for switching and data networks. An
(xDSL), packetized VoIP and data services (using POTS, ISDN, basic SDH add-drop multiplexer (ADM) is integrated in
and Ethernet access/primary rate access, digital leased lines), just one board. Ethernet, PDH and ATM transport
connectivity, all key the system delivers broadband Internet access, capabilities are also available. Traffic is transpor-
technological trends data and multimedia capabilities over ted between Alcatel 1540 Litespan exchange units
today. asymmetrical digital subscriber line (ADSL, (EUs) and remote units (RUs) through copper
ADSL2 or ADSL2+) or global standard high- lines (using HDSL or g.SHDSL transport protocols),
speed DSL (g.SHDSL) to enable quicker Internet fiber connections or external leased-line networks.
surfing, data transmission and video applications
for end users. Alcatels 1540 Litespan represents Broadband (xDSL) traffic is routed through syn-
the perfect triple-play solution for many types of chronous transport module 1 (STM-1) optical or
access network scenarios. E3/DS3 electrical interfaces to the ATM backbone.
In addition, xDSL traffic is redirected to the
Support of Multiple Topologies backbone (typically IP) through an Ethernet port
for More Flexible Applications (10/100Base-T or optical 100 FX). This increases
Star, ring, tree, point-to-point and mixed flexibility when connecting to the IP data
topologies are all supported. backbone through Metro Ethernet networks.
> 4 A L C AT E L
Open Interfaces for Multivendor
Compatibility, Competitive Pricing
and Investment Protection
The Alcatel 1540 Litespan family is designed with
standard interfaces (V5 for TDM voice services,
Megaco/H.248 for VoIP and ATM or Ethernet for
xDSL traffic) to ensure that it functions effectively
in open environments. This open design enables
service providers to build competitive, customized
solutions that are compatible with their existing
investments and their customers needs.
A L C AT E L 5 >
Lower CAPEX and OPEX Future-Ready and Safe
and Increased Revenues Investment Evolution to NGN
Because the Alcatel 1540 Litespan family provides The Alcatel 1540 Litespan is designed to be NGN
so many services on a single platform, it can ready, able to convert smoothly from a multi-
significantly affect overall revenues. Its flexible service access platform supporting todays TDM
design ensures that new services can be added services to a full access media gateway in NGN.
easily as user demand requires them. Through the simple insertion of a VoIP gateway
card, the node is transformed into an NGN access
The Alcatel 1540 Litespan significantly lowers gateway that supports VoIP services with minimal
capital expenditure (CAPEX) and OPEX by: future investment. The operator chooses which
> Starting fiber at the most economical point customers remain connected to the legacy TDM
> Using standard interfaces backbone and which migrate to the new NGN
> Interconnecting Ethernet, ATM, public backbone.
switched telephone network (PSTN)/ISDN,
leased lines, TDM, etc., in a single node
> Supporting flexible topologies in a single
system
> Including open interfaces for multivendor
interworking
> Providing integrated network management
> 6 A L C AT E L
SUMMARY OF FEATURES
Tables 1 and 2 provide a summary of the most important features available in the Alcatel 1540 Litespan and Alcatel 1353 LMS.
TABLE 1 - ALCATEL 1540 LITESPAN
Feature Description
POTS card integrates ringing and testing 32 ports POTS board integrating ringing and testing functionality previously provided
by dedicated boards
Integration frees up more slots for services
Four multiservice line shelves (MLSs) per indoor rack
System capacity to 2,556 POTS lines in a single rack
Enhanced RU subtending Alcatel 1540 Litespan RUs subtended from Alcatel SDH Litespan hubs through
external transport G.703 link
Up to 15 RUs can be subtended from an EU
System protection Functionality protected by different components inside system: transport, controllers,
ringers and powering
Fast Ethernet network interface xDSL traffic redirected toward the backbone through Ethernet port (10/100Base-T
or optical 100 FX)
Increases flexibility when connecting to IP data backbone through Metro Ethernet networks
MultiDSL (ADSL, ADSL2 and ADSL2+) Ensures industry-leading operation for broadband services in copper loops
Multiples Virtual Circuit (VC) allocation by end-user Using Alcatel 1540 ADSL boards, several VCs established between ADSL port and end-user router
Each VC devoted to particular broadband service: HSIA, video and VoIP
Ensures each service remains discrete and does not degrade the quality of another service
Internet Group Management Protocol (IGMP) Optimizes bandwidth resources while delivering IP TV
snooping for Multicast transmission of video
streaming
Higher scalability and capacity of VoIP VoIP Server Card (VISC) offers 48 to 128 active calls (depending on the card variant)
server card System includes up to 4 VISCs for serving 3,840 subscribers (maximum)
Allows up to nine call attempts per second
Ethernet 10/100Base-T network interfaces VISC implements Ethernet port, avoiding packetization of VoIP cells in ATM
IP packets allocated directly in Ethernet frames, avoiding use of ATM port
Narrowband and broadband applications in a Alcatel 5523 ADSL Workstation (AWS) and 1353 DN applications run on single server
single server
Common integrated desktop Operators run any network management application from any server in system (previous releases
allowed one client to run applications on specific server)
Reduces number of servers required
Logical inventory Ability to retrieve entire inventory of system resources related to list of end subscribers
Q3 interface over IP data communication networks Data communication network (DCN) for Alcatel 1353 DN application now based on both open
systems interconnection (OSI) standard and Transmission Control Protocol (TCP)/IP stacks
More cost-effective DCN implementation
Out-band and in-band interfaces for the DCN DCN between Alcatel 1540 Litespan and Alcatel 1353 DN applications connected either through
in-band channel or by out-band Ethernet interface at 1540 Litespan side
A L C AT E L 7 >
ALCATEL 1353 LITESPAN
MANAGEMENT SYSTEM
The use of a consistent The Alcatel 1353 LMS includes several management applications for
management approach services delivered on the Alcatel 1540 Litespan platform:
shortens the learning > Alcatel 1353 Distributed Network (DN): Element manager for voice and
curve by giving oper- leased line data services. The Alcatel 1353 DN is based on the Alcatel
ators a common look Management Platform (ALMAP). The use of common system
and feel. management functions provides an integrated Telecommunications
Management Network (TMN) architecture that gives operators a
common look and feel across ALMAP-based applications.
> Alcatel 1353 SDH transport network (SH): Element manager for the
optional integrated ADM (for SDH services)
Alcatel 1353 Gateway (GW): Application layered on the Alcatel 1353
DN and Alcatel 1353 SH to interface with third-party operational
support systems (OSSs)
> Alcatel 1355 DN: Subscriber manager for voice services
Alcatel 1355 GW: Gateway application layered on the Alcatel 1355 DN
to interface with third-party OSSs
> Alcatel 5523 AWS: Element manager for xDSL (broadband) services
The Alcatel 1353 LMS supports both UNIX and Microsoft Windows 2000
operating systems.
> 8 A L C AT E L
THE ALCATEL ADVANTAGE
Alcatel provides The Alcatel 1540 Litespan is enhanced by Alcatel has a massive installed base of more than
end-to-end communi- Alcatels long-term leadership in: 314 million lines that can be leveraged with the
cations solutions, > DSL and DLC segments Alcatel 1540 Litespan. The Alcatel 1540 Litespan
enabling carriers, > Voice switching incorporates technology from the Alcatel 7300
service providers and > Intelligent networks Advanced Services Access Manager (ASAM)
enterprises to deliver > Terrestrial and submarine transmission family, which represents the largest installed base
content to any type of DSL worldwide. The Alcatel 1540 Litespan also
of user, anywhere Furthermore, Alcatels expertise in applications incorporates technology from the Alcatel SDH
in the world. and network services enables our customers to transmission family of products, representing the
focus on optimizing their service offerings and largest installed base of SDH equipment in the
revenue streams. world. Alcatel has the largest geographical
coverage in the ETSI market, making it possible
NGN Product Portfolio to provide turnkey solutions virtually everywhere
Alcatel 1540 Litespan is part of the comprehensive in APAC and Europe and South regions.
Alcatel OPEN portfolio that offers end-to-end
solutions for NGNs. In numerous deployments, the Alcatel 1540
Litespan is already field proven, interworking
The products listed in Table 3 are part of the with other products in the Alcatel NGN portfolio
Alcatel NGN Class 5 network solution. and with the majority of switching vendors
currently in the market.
Leveraging Alcatels
Established Position
As part of the Alcatel portfolio, the Alcatel 1540
Litespan family enjoys a number of advantages.
Alcatel 5020 family of Softswitches with Media Gateway Controller > Provides call control, local telephony services and multimedia
and Call Session Controller applications
> Interfaces with the SS7 network
> Platforms centrally located in the service providers network
Alcatel 1540 Litespan Multiservice Access Gateway > Integrates VoIP gateway into multiservice access node
> Platforms distributed over the service providers territory
Residential gateways > Offer voice access using traditional phones and high-speed Internet
access (HSIA) over a single copper pair
> Platforms reside on the customer premises
Alcatel 7510/7515 Media Gateways (MGs) > Bridge existing PSTN and newly built NGN
A L C AT E L 9 >
Alcatel and the Alcatel logo are registered trademarks of Alcatel. All other trademarks
are the property of their respective owners. Alcatel assumes no responsibility for the
accuracy of the information presented, which is subject to change without notice.
04 2005 Alcatel. All rights reserved. 3CL 00469 0532 TQZZA Ed.03 18986
A smarter approach
to cellular access
solutions...
Nera FlexLink
A smarter approach to wireless access solutions.
Flexibility and reliability are important features in our search for
wireless solutions excellence. Flexibility comes along with
innovation. Reliability is enabling rapidly built networks which meet
the need for coverage, capacity and functionality from day one.
Thats Neras definition of a smarter approach to wireless access
solutions. The FlexLink is a low and medium capacity microwave
access solution covering from 2x2 to 16x2 Mbit/s capacity, in the
7, 8, 13, 15, 18, 23, 26, 28, 32 and 38 GHz frequency bands.
Outdoor Unit connected to the outdoor unit. A single This interface simplifies the site
The FlexLink radio unit is a compact indoor unit can support two ODUs and installation work and significantly
size unit containing all radio circuits cross connect the 2 Mbit/s circuits in reduces the problems related to
and modem. The connection between 3 directions. In protected configurations, cabling work. The AUX unit is a plug-in
the indoor unit and the outdoor unit is a single indoor unit can be connected module which gives access to auxiliary
made by a single coaxial cable carrying to two radio units with a built-in data channels for up to 64 kbit/s
the Flexbus data and power to the protection switch. In addition, capacity. The Ethernet interface enables
outdoor units. Maximum length the indoor units can also be protected new user applications for the FlexLink.
between the indoor unit and the by using two indoor units connected The plug-in module gives access to two
outdoor unit is 300 meters. The outdoor via the 1+1 back plane. The IDU in fast Ethernet ports which can be routed
unit is normally mounted directly on protected systems requires 2 U to any radio unit connected to the
the antenna using an integrated rack space. indoor unit, and the link capacity for
antenna support. In protected systems, IP-Traffic can be scaled in 2 Mbit/s steps.
an RF hybrid is used to combine the two
Nera FlexLink | Smarter solutions in cellular access
Copyright 2002 Nera Networks AS. All rights reserved. Information in this document is subject to change without notice. Nera Networks assumes no responsibility for any errors which may occur in this document.
NN/0802/BH
Banda de 13 GHz. Sub-banda de 12,75 a 13,25 GHz. Rec.497-4
CONATEL
Portadora de Frecuencia Portadora de Frecuencia
Tx (MHz) Rx (MHz)
11 12754,5 11 13020,5
12 12761,5 12 13027,5
1 12765 1 13031
OBSERVACIONES:
13 12768,5 13 13034,5
14 12775,5 14 13041,5 Capacidad de los Sistemas:
1i 12779 1i 13045 Varias Capacidades
AB = ver cuadro inferior
2 12793 2 13059
Separacin Tx-Rx: 266 MHz.
2i 12807 2i 13073
3 12821 3 13087
3i 12835 3i 13101
4 12849 4 13115
4i 12863 4i 13129
5 12877 5 13143
5i 12891 5i 13157
6 12905 6 13171
6i 12919 6i 13185
7 12933 7 13199
7i 12947 7i 13213
8 12961 8 13227
8i 12975 8i 13241
PRODUCT OVERVIEW
The Cisco Aironet IEEE 802.11a/b/g Wireless PCI Adapter provides high-performance
54 Mbps connectivity in the 2.4 and 5 GHz bands. Whether configured to support single
802.11b coverage, single 802.11g coverage, single 802.11a coverage, dual-mode 802.11a/g
coverage or tri-mode 802.11a/b/g coverage, the Cisco Aironet 802.11a/b/g Wireless PCI
Adapter is Wi-Fi compliant and combines the freedom of wireless connectivity with the
performance, security, and manageability that businesses require (Figure 1).
The low-profile form factor and two-meter cable length provide significant flexibility for
installation in low-profile devices, such as slim desktops and point-of-sale (POS) devices.
For versatility, both a low profile and a standard profile bracket frame are included with
the adapter. The attached dual-band 2.4/5 GHz 1 dBi effective gain antenna has a 2-meter
cable allowing for optimal placement to maximum performance.
LAN/WAN
Laptop with 802.11a
Client Adapter
ROAMING
Laptop with
802.11a Client
Adapter
Laptop with
802.11a/b/g Router
Client Adapter Aironet 1200 Series Power Injector Switch
802.11a/b/g
Access Point
Switch with Inline Power
(Cisco Catalyst 3550-24-PWR)
Cisco Wireless
IP Phone 7920
Desktop with
802.11a/b/g
Cisco Wireless Client Adapter
Wireless Connections IP Phone 7920
802.11b/g Cell (802.11b)
802.11a Cell
Roaming
Switched Connections
Secure network communications with the Cisco Wireless Security Suite and support for Wi-Fi Protected
Access (WPA)
The Cisco Aironet 802.11a/b/g Wireless PCI Adapter supports the most common 802.1X authentication types,
including Cisco LEAP, Extensible Authentication Protocol Transport Layer Security (EAP-TLS), Protected Extensible
Authentication Protocol (PEAP-GTC), and Protected Extensible Authentication Protocol Microsoft Challenge
Handshake Authentication Protocol Version 2 (PEAP-MSCHAP V2). A wide selection of RADIUS servers, such as
the Cisco Secure Access Control Server (ACS) and Cisco Access Registrar (AR) server, can be used for enterprise-class
centralized security and management that includes:
Strong, mutual authentication to ensure that only legitimate clients associate with legitimate and authorized
network RADIUS servers via authorized access points
Dynamic per-user, per-session encryption keys that automatically change on a configurable basis to protect the
privacy of transmitted data
Stronger encryption, such as message integrity check (MIC), per-packet keys via initialization vector hashing, and
broadcast key rotation, provided by Temporal Key Integrity Protocol (TKIP) enhancements
RADIUS Server
Campus Network
7 Client and Access Point activate encryption 6 Access Point delivers Broadcast encryption key
and use Unicast and Broadcast encryption encrypted with Unicast encryption key to Client
keys for transmission
Wireless domain services (WDS) is introduced with Cisco SWAN. WDS is a collection of Cisco IOS Software features
that expand WLAN client mobility, simplify WLAN deployment and management and enhance WLAN security.
These services, supported on access points and client devices today and on specific Cisco LAN switches and routers
in 2004, include radio management aggregation, fast secure roaming and WAN link remote site survivability. WDS
radio management aggregation supports radio frequency (RF) managed services such as rogue access point detection,
interference detection and assisted site surveys.
Figure 3
Fast Secure Roaming
AP2 AP1
Note: Because the WDS handles roaming and reauthentication, the WAN link is not used
Profile ManagerAllows users to create specific profile settings for various environments, such as the office and
home, making it simple for telecommuters and business travelers to move from one environment to another
(Figure 4)
Customized profile settingsLets users individually select channel, service set identifier (SSID), Wired Equivalent
Privacy (WEP) key, and the authentication method for different locations
Cisco LEAP authentication status screenProvides status updates regarding the Cisco LEAP authentication
process
Auto-selection of profiles, including Cisco LEAP profileProvides automatic selection of established profiles,
including Cisco LEAP profile without requiring the storage of Cisco LEAP username and password in the profile
System tray iconProvides easy access to wireless LAN connection information and one-click access to common
actions such as the manual selection of a profile or turning the radio on/off.
Troubleshooting UtilityProvides step-by-step details on the process of connecting to an access point with
highlights on why a connection failed. (Figure 5)
Support for the most popular enterprise operating systemsWindows XP and Windows 2000
Figure 4
Cisco Aironet Desktop Utility (Profile Management) Screen
An Aironet Client Adapter installation wizard for Windows (CB21AG and PI21AG) is provided for easy installation
of the client firmware, drivers, and utilities. The wizard offers several installation options: install client utilities and
driver, install driver only, or make driver installation diskette(s). For ease of use, the installation wizard image file is
a self-extracting (.exe) file.
Feature Benefit
Cisco Wireless Security Suite IEEE 802.1X support, including Cisco LEAP, PEAP-GTC, PEAP-MSCHAP V2, and EAP-
TLS for mutual authentication with dynamic per-user, per-session encryption keys
via TKIP enhancements. Full support for WPA. Ready for Advanced Encryption
Standard (AES) Support.
Enhanced Client Network Bundled with comprehensive, yet easy-to-use client network management utilities
Management Features providing a secure, intuitive, and convenient way to manage and configure the
adapter.
Cisco LEAP Single Sign-On Convenient option to utilize log-in credentials for Cisco LEAP sign-on on the users
network, thus eliminating the need to enter a second set of credentials.
Low Profile Form Factor Low-profile PCI form factor allowS installation in low-profile device, such as slim
desktops and POS devices. Both a low-profile and a standard-profile bracket frame
are included with the product.
2-Meter Antenna Cable The attached dual-band 2.4/5 GHz 2 dBi effective gain antenna has a 2-meter cable
allowing for optimal placement to maximize performance.
Cisco SWAN A comprehensive Cisco solution for deploying, operating and managing a few to
hundreds to thousands of Cisco Aironet access points using the Cisco
infrastructure. This solution extends to the wireless LAN the same level of security,
scalability, and reliability that customers have come to expect in their wired LAN by
introducing wireless-aware capabilities into the Cisco infrastructure.
Feature Benefit
Wireless Domain Services A component of Cisco SWAN, WDS is a collection of Cisco IOS Software features that
(WDS) enhance WLAN client mobility and simplify WLAN deployment and management. WDS
includes radio management aggregation, fast secure roaming, and WAN link remote site
survivability.
Fast Secure Roaming Allows authenticated client devices to roam securely from one access point to another
without any perceptible delay during reassociation. Provides support for latency-sensitive
applications such as VoIP, ERP and Citrix.
Part Number
AIR-PI21AG-A-K9
AIR-PI21AG-E-K9
AIR-PI21AG-J-K9
AIR-PI21AG-W-K9
AIR-PI21AG-A-K9-10 (10-unit bulk pack)
Regulatory Domains:
A=Americas
E=ETSI
J=TELEC (Japan)
W=Rest-of-world
Customers are responsible for verifying approval for use in their countries. Please see http://www.cisco.com/go/
aironet/compliance to verify approval and to identify the regulatory domain that corresponds to a particular country.
Form Factor
Interface
Network Standard
IEEE 802.11a/b/g
Operating Voltage
3.3 V ( 0.3 V)
LED
Wireless Medium
802.11g:
Direct Sequence Spread Spectrum (DSSS) and Orthogonal Frequency Divisional Multiplexing (OFDM)
802.11a:
Orthogonal Frequency Division Multiplexing (OFDM)
Modulation
DSSS
Differential Binary Phase Shift Keying (DBPSK) @ 1 Mbps
Differential Quadrature Phase Shift Keying (DQPSK) @ 2 Mbps
Complementary Code Keying (CCK) @ 5.5 and 11 Mbps
OFDM
BPSK @ 6 and 9 Mbps
QPSK @ 12 and 18 Mbps
16-Quadrature Amplitude Modulation (QAM) @ 24 and 36 Mbps
64-QAM @ 48 and 54 Mbps
Frequency Bands
Delay Spread
350 ns @ 1 Mbps
300 ns @ 2 Mbps
200 ns @ 5.5 Mbps
400 ns @ 6 Mbps
250 ns @ 9 Mbps
130 ns @ 11 Mbps
250 ns @ 12 Mbps
220 ns @ 18 Mbps
160 ns @ 24 Mbps
100 ns @ 36 Mbps
90 ns @ 48 Mbps
70 ns @ 54 Mbps
802.11g:
-94 dBm @ 1 Mbps
-93 dBm @ 2 Mbps
-92 dBm @ 5.5 Mbps
-86 dBm @ 6 Mbps
-86 dBm @ 9 Mbps
-90 dBm @ 11 Mbps
-86 dBm @ 12 Mbps
-86 dBm @ 18 Mbps
-84 dBm @ 24 Mbps
-80 dBm @ 36 Mbps
-75 dBm @ 48 Mbps
-71 dBm @ 54 Mbps
802.11a:
5150 to 5250 MHz 5250 to 5350 MHz 5725 to 5805 MHz 5.470 -5.725 GHz
-87 dBm @ 6 Mbps -89 dBm @ 6 Mbps -84 dBm @ 6 Mbps -87 dBm @ 6 Mbps
-87 dBm @ 9 Mbps -89 dBm @ 9 Mbps -84 dBm @ 9 Mbps -87 dBm @ 9 Mbps
-87 dBm @ 12 Mbps -89 dBm @ 12 Mbps -84 dBm @ 12 Mbps -87 dBm @ 12 Mbps
-87 dBm @ 18 Mbps -85 dBm @ 18 Mbps -83 dBm @ 18 Mbps -87 dBm @ 18 Mbps
-82 dBm @ 24 Mbps -82 dBm @ 24 Mbps -82 dBm @ 24 Mbps -82 dBm @ 24 Mbps
-79 dBm @ 36 Mbps -79 dBm @ 36 Mbps -79 dBm @ 36 Mbps -79 dBm @ 36 Mbps
-74 dBm @ 48 Mbps -74 dBm @ 48 Mbps -72 dBm @ 48 Mbps -74 dBm @ 48 Mbps
-72 dBm @ 54 Mbps -72 dBm @ 54 Mbps -65 dBm @ 54 Mbps -72 dBm @ 54 Mbps
802.11b/g:
20 dBm (100 mW) @ 1, 2, 5.5 and 11 Mbps
18 dBm (63 mW) @ 1, 2, 5.5, 6, 9, 11, 12, 18 and 24 Mbps
17 dBm (50 mW) @ 1, 2, 5.5, 6, 9, 11, 12, 18, 24 and 36 Mbps
15 dBm (32 mW) @ 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36 and 48 Mbps
13 dBm (20 mW) @ 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48 and 54 Mbps
10 dBm (10 mW) @ 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48 and 54 Mbps
802.11a:
16 dBm (40 mW) @ 6, 9, 12, 18 and 24 Mbps
14 dBm (25 mW) @ 6, 9, 12, 18, 24 and 36 Mbps
13 dBm (20 mW) @ 6, 9, 12, 18, 24, 36, 48 and 54 Mbps
11 dBm (13 mW) @ 6, 9, 12, 18, 24, 36, 48 and 54 Mbps
10 dBm (10 mW) @ 6, 9, 12, 18, 24, 36, 48 and 54 Mbps
Maximum power setting will vary according to individual country regulations.
Range (typical with PI21AG at maximum transmit power communicating with a AP1231AG configured with
2.2 dBi dipole antenna for 802.11g and 802.11b and 6 dBi gain patch for 802.11a)
802.11a 802.11b/g
Indoor (typical)
Outdoor (typical)
Compliance
Power Management
Antenna
Attached dual-band 2.4/5 GHz 1 dBi effective gain antenna with 2-meter cable
Drivers
Dimensions
Weight
Environmental
Warranty
One Year
Wi-Fi Certification
Cisco Systems has more than 200 offices in the following countries and regions. Addresses, phone numbers, and fax numbers are listed on the
C i s c o We b s i t e a t w w w. c i s c o . c o m / g o / o f fi c e s
Argentina Australia Austria Belgium Brazil Bulgaria Canada Chile China PRC Colombia Costa Rica Croatia Cyprus
Czech Republic Denmark Dubai, UAE Finland France Germany Greece Hong Kong SAR Hungary India Indonesia Ireland
Israel Italy Japan Korea Luxembourg Malaysia Mexico The Netherlands New Zealand Norway Peru Philippines Poland
Portugal Puerto Rico Romania Russia Saudi Arabia Scotland Singapore Slovakia Slovenia South Africa Spain Sweden
S w i t z e r l a n d Ta i w a n T h a i l a n d Tu r k e y U k r a i n e U n i t e d K i n g d o m U n i t e d S t a t e s Ve n e z u e l a Vi e t n a m Z i m b a b w e
All contents are Copyright 19922004 Cisco Systems, Inc. All rights reserved. Cisco, Cisco Systems, and the Cisco Systems logo are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and
certain other countries.
All other trademarks mentioned in this document or Website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company.
(0403R) 203181_ETMG_JS_05.04
DATA SHEET
PRODUCT OVERVIEW
The Cisco Aironet IEEE 802.11a/b/g Wireless CardBus Adapter provides high-
performance 54 Mbps connectivity in the 2.4 and 5 GHz bands. Whether configured
to support single 802.11b coverage, single 802.11g coverage, single 802.11a coverage, dual-
mode 802.11a/g coverage or tri-mode 802.11a/b/g coverage, the Cisco Aironet 802.11a/b/g
Wireless Cardbus Adapter is Wi-Fi compliant and combines the freedom of wireless
connectivity with the performance, security, and manageability that businesses require
(Figure 1).
LAN/WAN
Laptop with 802.11a
Client Adapter
ROAMING
Laptop with
802.11a Client
Adapter
Laptop with
802.11a/b/g Router
Client Adapter Aironet 1200 Series Power Injector Switch
802.11a/b/g
Access Point
Switch with Inline Power
(Cisco Catalyst 3550-24-PWR)
Cisco Wireless
IP Phone 7920
Desktop with
802.11a/b/g
Cisco Wireless Client Adapter
Wireless Connections IP Phone 7920
802.11b/g Cell (802.11b)
802.11a Cell
Roaming
Switched Connections
Secure network communications, with the Cisco Wireless Security Suite and support for Wi-Fi Protected
Access (WPA)
The Cisco Aironet 802.11a/b/g Wireless Cardbus Adapter supports the most common 802.1X authentication types,
including Cisco LEAP, Extensible Authentication Protocol Transport Layer Security (EAP-TLS), Protected Extensible
Authentication Protocol (PEAP-GTC), and Protected Extensible Authentication Protocol Microsoft Challenge
Handshake Authentication Protocol Version 2 (PEAP-MSCHAP V2). A wide selection of RADIUS servers, such as
the Cisco Secure Access Control Server (ACS) and Cisco Access Registrar (AR) server, can be used for enterprise-class
centralized user management that includes:
Strong, mutual authentication to ensure that only legitimate clients associate with legitimate and authorized
network RADIUS servers via authorized access points
Dynamic per-user, per-session encryption keys that automatically change on a configurable basis to protect
the privacy of transmitted data
Stronger encryption keys provided by Temporal Key Integrity Protocol (TKIP) enhancements such as message
integrity check (MIC), per-packet keys via initialization vector hashing, and broadcast key rotation
RADIUS Server
Campus Network
7 Client and Access Point activate encryption 6 Access Point delivers Broadcast encryption key
and use Unicast and Broadcast encryption encrypted with Unicast encryption key to Client
keys for transmission
Wireless domain services (WDS) is introduced with Cisco SWAN. WDS is a collection of Cisco IOS Software features
that expand WLAN client mobility, simplify WLAN deployment and management and enhance WLAN security.
These services, supported on access points and client devices today and on specific Cisco LAN switches and routers
in 2004, include radio management aggregation, fast secure roaming and WAN link remote site survivability. WDS
radio management aggregation supports radio frequency (RF) managed services such as rogue access point detection,
interference detection and assisted site surveys.
Figure 3
Fast Secure Roaming
AP2 AP1
Note: Because the WDS handles roaming and reauthentication, the WAN link is not used
Profile ManagerAllows users to create specific profile settings for various environments, such as the office
and home, making it simple for telecommuters and business travelers to move from one environment to another
(Figure 4)
Customized Profile settingsLets users individually select channel, service set identifier (SSID), Wired Equivalent
Privacy (WEP) key, and the authentication method for different locations
Cisco LEAP authentication status screenProvides status updates regarding the Cisco LEAP
authentication process
Auto-selection of profiles, including Cisco LEAP profileProvides automatic selection of established profiles,
including Cisco LEAP profile, without requiring storage of the Cisco LEAP username and password in the profile
Aironet Client MonitorProvides a subset of ADU features, such as status information about the client adapter
and access to basic tasks such as selecting a profile. This application runs from the system tray icon.
Troubleshooting UtilityProvides step-by-step details on the process of connecting to an access point with
highlights on why a connection failed. (Figure 5)
Support for the most popular enterprise operating systemsWindows XP and Windows 2000
Figure 4
Cisco Aironet Desktop Utility (Profile Management) Screen
An Aironet Client Adapter installation wizard for Windows (CB21AG and PI21AG) is provided for easy installation
of the client firmware, drivers, and utilities. The wizard offers several installation offers: install client Utilities and
driver; install driver only; or make driver installation diskette(s). For ease of use, the installation wizard image file is
a self-extracting (.exe) file.
Feature Benefit
Cisco Wireless IEEE 802.1X support, including Cisco LEAP, PEAP-GTC, PEAP-MSCHAP V2, and EAP-
Security Suite TLS for mutual authentication with dynamic per-user, per-session encryption keys
via TKIP enhancements. Full support for WPA. Ready for Advanced Encryption
Standard (AES) Support.
Enhanced Client Network Bundled with comprehensive, easy-to-use client network management utilities to
Management Features provide a secure, intuitive, and convenient way to manage and configure the adapter.
Cisco LEAP Single Sign-On Convenient option to utilize log-in credentials for LEAP sign-on on the users network,
thus eliminating the need to enter a second set of credentials.
Cisco SWAN A comprehensive Cisco solution for deploying, operating and managing a few to
hundreds to thousands of Cisco Aironet access points using the Cisco infrastructure.
This solution extends to the wireless LAN the same level of security, scalability, and
reliability that customers have come to expect in their wired LAN by introducing
wireless-aware capabilities into the Cisco infrastructure.
Wireless Domain Services A component of Cisco SWAN, WDS is a collection of Cisco IOS Software features that
(WDS) enhance WLAN client mobility and simplify WLAN deployment and management.
WDS includes radio management aggregation, fast secure roaming, and WAN link
remote site survivability.
Fast Secure Roaming Allows authenticated client devices to roam securely from one access point to
another without any perceptible delay during reassociation. Provides support
for latency-sensitive applications such as VoIP, ERP and Citrix.
Part Number
AIR-CB21AG-A-K9
AIR-CB21AG-E-K9
AIR-CB21AG-J-K9
AIR-CB21AG-W-K9
AIR-CB21AG-A-K9-40 (40-unit bulk pack)
Regulatory Domains:
A=Americas
E=ETSI
J=TELEC (Japan)
W=Rest-of-world
Customers are responsible for verifying approval for use in their country. Please see http://www.cisco.com/go/
aironet/compliance to verify approval and to identify the regulatory domain that corresponds to a particular country.
Form Factor
CardBus Type II
Interface
Network Standard
IEEE 802.11a/b/g
Operating Voltage
3.3 V ( 0.3 V)
LED
Wireless Medium
802.11g:
Direct Sequence Spread Spectrum (DSSS) and Orthogonal Frequency Divisional Multiplexing (OFDM)
802.11a:
OFDM
Modulation
DSSS
Differential Binary Phase Shift Keying (DBPSK) @ 1 Mbps
Differential Quadrature Phase Shift Keying (DQPSK) @ 2 Mbps
Complementary Code Keying (CCK) @ 5.5 and 11 Mbps
OFDM
BPSK @ 6 and 9 Mbps
QPSK @ 12 and 18 Mbps
16-Quadrature Amplitude Modulation (QAM) @ 24 and 36 Mbps
64-QAM @ 48 and 54 Mbps
Frequency Bands
Delay Spread
350 ns @ 1 Mbps
300 ns @ 2 Mbps
200 ns @ 5.5 Mbps
400 ns @ 6 Mbps
250 ns @ 9 Mbps
130 ns @ 11 Mbps
250 ns @ 12 Mbps
220 ns @ 18 Mbps
160 ns @ 24 Mbps
100 ns @ 36 Mbps
90 ns @ 48 Mbps
70 ns @ 54 Mbps
802.11g:
-94 dBm @ 1 Mbps
-93 dBm @ 2 Mbps
-92 dBm @ 5.5 Mbps
-86 dBm @ 6 Mbps
-86 dBm @ 9 Mbps
-90 dBm @ 11 Mbps
-86 dBm @ 12 Mbps
-86 dBm @ 18 Mbps
-84 dBm @ 24 Mbps
-80 dBm @ 36 Mbps
-75 dBm @ 48 Mbps
-71 dBm @ 54 Mbps
802.11a:
5150 to 5250 MHz 5250 to 5350 MHz 5725 to 5805 MHz 5.470 -5.725 GHz
-87 dBm @ 6 Mbps -89 dBm @ 6 Mbps -84 dBm @ 6 Mbps -87 dBm @ 6 Mbps
-87 dBm @ 9 Mbps -89 dBm @ 9 Mbps -84 dBm @ 9 Mbps -87 dBm @ 9 Mbps
-87 dBm @ 12 Mbps -89 dBm @ 12 Mbps -84 dBm @ 12 Mbps -87 dBm @ 12 Mbps
-87 dBm @ 18 Mbps -85 dBm @ 18 Mbps -83 dBm @ 18 Mbps -87 dBm @ 18 Mbps
-82 dBm @ 24 Mbps -82 dBm @ 24 Mbps -82 dBm @ 24 Mbps -82 dBm @ 24 Mbps
-79 dBm @ 36 Mbps -79 dBm @ 36 Mbps -79 dBm @ 36 Mbps -79 dBm @ 36 Mbps
-74 dBm @ 48 Mbps -74 dBm @ 48 Mbps -72 dBm @ 48 Mbps -74 dBm @ 48 Mbps
-72 dBm @ 54 Mbps -72 dBm @ 54 Mbps -65 dBm @ 54 Mbps -72 dBm @ 54 Mbps
802.11b/g:
20 dBm (100 mW) @ 1, 2, 5.5 and 11 Mbps
18 dBm (63 mW) @ 1, 2, 5.5, 6, 9, 11, 12, 18 and 24 Mbps
17 dBm (50 mW) @ 1, 2, 5.5, 6, 9, 11, 12, 18, 24 and 36 Mbps
15 dBm (30 mW) @ 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36 and 48 Mbps
13 dBm (20 mW) @ 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48 and 54 Mbps
10 dBm (10 mW) @ 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48 and 54 Mbps
802.11a:
16 dBm (40 mW) @ 6, 9, 12, 18 and 24 Mbps
14 dBm (25 mW) @ 6, 9, 12, 18, 24 and 36 Mbps
13 dBm (20 mW) @ 6, 9, 12, 18, 24, 36, 48 and 54 Mbps
11 dBm (13 mW) @ 6, 9, 12, 18, 24, 36, 48 and 54 Mbps
10 dBm (10 mW) @ 6, 9, 12, 18, 24, 36, 48 and 54 Mbps
Maximum power setting will vary according to individual country regulations.
Range (typical with CB21AG at maximum transmit power communicating with a AP1231AG configured with
2.2 dBi dipole antenna for 802.11g and 802.11b and 6 dBi gain patch for 802.11a)
802.11a 802.11b/g
Indoor (typical)
Outdoor (typical)
Compliance
Power Management
Antenna
Drivers
Dimensions
2.05 in. (52.08mm) wide x 4.46 in. (113.35mm) deep x 0.19 in. (4.80mm) high
Weight
1.6 oz (44.0g)
Environmental
Warranty
One Year
Wi-Fi Certification
Cisco Systems has more than 200 offices in the following countries and regions. Addresses, phone numbers, and fax numbers are listed on the
C i s c o We b s i t e a t w w w. c i s c o . c o m / g o / o f fi c e s
Argentina Australia Austria Belgium Brazil Bulgaria Canada Chile China PRC Colombia Costa Rica Croatia Cyprus
Czech Republic Denmark Dubai, UAE Finland France Germany Greece Hong Kong SAR Hungary India Indonesia Ireland
Israel Italy Japan Korea Luxembourg Malaysia Mexico The Netherlands New Zealand Norway Peru Philippines Poland
Portugal Puerto Rico Romania Russia Saudi Arabia Scotland Singapore Slovakia Slovenia South Africa Spain Sweden
S w i t z e r l a n d Ta i w a n T h a i l a n d Tu r k e y U k r a i n e U n i t e d K i n g d o m U n i t e d S t a t e s Ve n e z u e l a Vi e t n a m Z i m b a b w e
All contents are Copyright 19922004 Cisco Systems, Inc. All rights reserved. Aironet, Cisco, Cisco Systems, and the Cisco Systems logo are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United
States and certain other countries.
All other trademarks mentioned in this document or Website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company.
(0403R) 203181_ETMG_JS_05.04
REFERENCE GUIDE
OVERVIEW
Executive Overview
This antenna reference guide is intended to provide information to assist in understanding
the issues and concerns of antennas used with a Cisco Aironet wireless LAN system, or
wireless bridge system. It details deployment and design, limitations and capabilities, and
basic theories of antennas. This document also contains information about the Cisco
Systems antennas and accessories, as well as installation scenarios, regulatory information,
and technical specifications and diagrams of the available antennas.
Overview of Antennas
Each Cisco Aironet radio product is designed to perform in a variety of environments.
Implementing the antenna system can greatly improve coverage and performance. To
optimize the overall performance of a Cisco wireless LAN, it is important to understand
how to maximize radio coverage with the appropriate antenna selection and placement.
An antenna system (Figure 1) comprises numerous components, including the antenna,
mounting hardware, connectors, antenna cabling, and in some cases, a lightning arrestor.
For a consultation, please contact a Cisco Aironet partner at: tools.cisco.com/WWChannels/
LOCATR/jsp/partner_locator.jsp
Cisco partners can provide onsite engineering assistance for complex requirements.
Figure 1
Cisco Aironet 5.8 GHz and 2.4 GHz Antennas
The ISM bands typically allow users to operate wireless products without requiring specific licenses, but this will vary
in some countries. In the United States, there is no requirement for FCC licenses. The products themselves must meet
certain requirements to be certified for sale, such as operation under 1-watt transmitter output power (in the United
States) and maximum antenna gain or Effective Isotropic Radiated Power (EIRP) ratings.
The Cisco Aironet product lines utilize both the 2.4- and 5-GHz bands. In the United States, three bands are defined
as unlicensed and known as the ISM bands. The ISM bands are as follows:
5 GHz (5.15-5.35 and 5.725-5.825 GHz)IEEE 802.11a, HIPERLAN/1 and HIPERLAN/2. This band is also
known as the UNII band, and has 3 sub-bands, UNII1 (5.150-5.250 GHz), UNII2 (5.250-5.350 GHz) and UNII3
(5.725-5.825 GHz)
Each range has different characteristics. The lower frequencies exhibit better range, but with limited bandwidth
and hence lower data rates. The higher frequencies have less range and are subject to greater attenuation from
solid objects.
In every case, for the same transmitter power and antennas, a DS system will have greater range, scalability,
and throughput than an FH system. For this reason Cisco has chosen to support only DS systems in the Spread
Spectrum products.
Antenna gain ratings are in decibels which is a ratio between two values. An antenna rating is typically to the gain
of an isotropic or dipole antenna. An isotropic antenna is a theoretical antenna with a uniform three-dimensional
radiation pattern (similar to a light bulb with no reflector). dBi is used to compare the power level of a given antenna
to the theoretical isotropic antenna. The U.S. FCC uses dBi in its calculations. An isotropic antenna is said to have a
power rating of 0 dB; for example, zero gain/loss when compared to itself.
Unlike isotropic antennas, dipole antennas are real antennas (dipole antennas are standard on Cisco Aironet access
points, base stations, and workgroup bridges). Dipole antennas have a different radiation pattern compared to
isotropic antennas. The dipole radiation pattern is 360 degrees in the horizontal plane and 75 degrees in the vertical
plane (assuming the dipole antenna is standing vertically) and resembles a donut in shape. Because the beam is
slightly concentrated, dipole antennas have a gain over isotropic antennas of 2.14 dB in the horizontal plane.
Dipole antennas are said to have a gain of 2.14dBi (in comparison to an isotropic antenna).
Some antennas are rated in comparison to dipole antennas. This is denoted by the suffix dBd. Hence, dipole antennas
have a gain of 0 dBd (= 2.14dBi).
Note that the majority of documentation refers to dipole antennas as having a gain of 2.2dBi. The actual figure is
2.14dBi, but is often rounded up.
TYPE OF ANTENNAS
Cisco offers several different styles of antennas for use with both access points and bridges in the 2.4 GHz product
line, as well as the 5 GHz BR1400 bridge. Every antenna offered for sale has been FCC-approved. Each type of
antenna will offer different coverage capabilities. As the gain of an antenna increases, there is some tradeoff to its
coverage area. Usually gain antennas offer longer coverage distances, but only in a certain direction. The radiation
patterns below will help to show the coverage areas of the styles of antennas that Cisco offers: omnidirectional, yagis,
and patch antennas.
Figure 2
Omnidirectional Antenna
Directional Antennas
Directional antennas come in many different styles and shapes. An antenna does not offer any added power to the
signal; it simply redirects the energy it receives from the transmitter. By redirecting this energy, it has the effect of
providing more energy in one direction, and less energy in all other directions. As the gain of a directional antenna
increases, the angle of radiation usually decreases, providing a greater coverage distance, but with a reduced coverage
angle. Directional antennas include yagi antennas (Figure 4), patch antennas (Figure 3), and parabolic dishes.
Parabolic dishes have a very narrow RF energy path and the installer must be accurate in aiming these at each other.
Figure 3
Directional Patch Antenna
Directional Yagi
Multipath Distortion
Multipath interference occurs when an RF signal has more than one path between a receiver and a transmitter.
This occurs in sites that have a large amount of metallic or other RF reflective surfaces.
Just as light and sound bounce off of objects, so does RF. This means there can be more than one path that RF takes
when going from a TX to and RX antenna. These multiple signals combine in the RX antenna and receiver to cause
distortion of the signal.
Multipath interference can cause the RF energy of an antenna to be very high, but the data would be unrecoverable.
Changing the type of antenna, and location of the antenna can eliminate multipath interference. (Figure 5.)
Figure 5
Multipath Distortion
TX RX
Time
Combined Results
Obstruction
Floor Time
A diversity antenna system can be compared to a switch that selects one antenna or another, never both at the same
time. The radio in receive mode will continually switch between antennas listening for a valid radio packet. After the
beginning sync of a valid packet is heard, the radio will evaluate the sync signal of the packet on one antenna, then
switch to the other antenna and evaluate. Then the radio will select the best antenna and use only that antenna for
the remaining portion of that packet.
On transmit, the radio will select the same antenna it used the last time it communicated to that given radio. If a
packet fails, it will switch to the other antenna and retry the packet.
One caution with diversity, it is not designed for using two antennas covering two different coverage cells. The
problem in using it this way is that, if antenna no. 1 is communicating to device no. 1 while device no. 2 (which is in
the antenna no. 2 cell) tries to communicate, antenna no. 2 is not connected (due to the position of the switch), and
the communication fails. Diversity antennas should cover the same area from only a slightly different location.
With the introduction of the latest DS physical layer chips, and the use of diversity antenna systems, DS systems have
equaled or surpassed FH in handling multipath interference. While the introduction of WBFH does increase the
bandwidth of FH systems, it drastically affects the ability to handle multipath issues, further reducing its range
compared to present DS systems in high RF reflective sites.
Building Construction
The density of the materials used in a buildings construction determines the number of walls the RF signal can pass
through and still maintain adequate coverage. Following are a few examples. Actual effect on the RF must be tested
at the site, and therefore a site survey is suggested.
Paper and vinyl walls have very little effect on signal penetration. Solid walls and floors and precast concrete walls
can limit signal penetration to one or two walls without degrading coverage. This may vary widely based on any steel
reinforcing within the concrete. Concrete and concrete block walls may limit signal penetration to three or four walls.
Wood or drywall typically allow for adequate penetration through five or six walls. A thick metal wall reflects signals,
resulting in poor penetration. Steel-reinforced concrete flooring will restrict coverage between floors to perhaps one
or two floors.
Warehousing/ManufacturingIn most cases, these installations require a large coverage area. Experience has
shown that an omnidirectional antenna mounted at 20 to 25 feet typically provides the best overall coverage. Of
course, this also depends upon the height of the racking, material on the rack, and ability to locate the antenna
at this height. Mounting the antenna higher will sometimes actually reduce coverage, as the angle of radiation
from the antenna is more outward than down. The antenna should be placed in the center of the desired coverage
cell and in an open area for best performance. In cases where the radio unit will be located against a wall, a
directional antenna such as a patch or yagi can be used for better penetration of the area. The coverage angle
of the antenna will affect the coverage area.
Small Office/Small RetailThe standard dipole may provide adequate coverage in these areas depending on the
location of the radio device. However, in a back corner office a patch antenna may provide better coverage. It can
be mounted to the wall above most obstructions for best performance. Coverage of this type antenna depends on
the surrounding environment.
Enterprise/ Large RetailIn most cases, these installations require a large coverage area. Experience has shown
that omnidirectional antennas mounted just below the ceiling girders or just below the drop ceiling typically
provide the best coverage (this will vary with stocking, type of material, and building construction). The antenna
should be placed in the center of the desired coverage cell and in an open area for best performance. In cases
where the radio unit will be located in a corner, or at one end of the building, a directional antenna such as a
patch or yagi can be used for better penetration of the area. Also, for areas that are long and narrowsuch as
long rows of rackinga directional antenna at one end may provide better coverage. The radiation angle of the
antennas will also affect the coverage area.
Point-to-PointWhen connecting two points together (such as a wireless bridge), the distance, obstructions, and
antenna location must be considered. If the antennas can be mounted indoors and the distance is very short
(several hundred feet), the standard dipole or mast mount 5.2dBi omnidirectional may be used. An alternative is
to use two patch antennas. For very long distances (1/2 mi. or more), directional high-gain antennas must be used.
These antennas should be installed as high as possible, and above obstructions such as trees, buildings, and so
on; and if directional antennas are used, they must be aligned so that their main radiated power lobes are directed
Point-to-Multipoint BridgeIn this case (in which a single point is communicating to several remote points), the
use of an omnidirectional antenna at the main communication point must be considered. The remote sites can
use a directional antenna that is directed at the main point antenna.
CABLING
As stated above, cabling introduces losses into the system, negating some of the gain an antenna introduces and
reducing range of the RF coverage.
Interconnect Cable
Attached to all antennas (except the standard dipoles), this cable provides a 50 Ohm impedance to the radio and
antenna, with a flexible connection between the two items. It has a high loss factor and should not be used except
for very short connections (usually less than 10 feet). Typical length on all antennas is 36 in. (or 12 in. on some
outdoor antennas).
Low-Loss/Ultra-Low-Loss Cable
Cisco offers two styles of cables for use with the 2.4 GHz product line. These cables provide a much lower loss factor
than standard interconnect cable, and they can be used when the antenna must be placed at any distance from the
radio device. While these are low-loss cables, they should still be kept to a minimum length. There are two types
of cable supplied by Cisco for mounting the antenna away from the radio unit. The 100 and 150 foot cables are
LMR600 type cable, while the 20 and 50 foot cables are LMR400 type cables. All four lengths are supplied with
one RP-TNC plug and one RP-TNC jack connector attached. This allows for connection to the radio unit and to
the interconnect cable supplied on the antennas.
Connectors
According to the US Federal Code of Regulations, products used in the 2.4 and 5 GHz ISM bands manufactured
after June 1994 must either use connectors that are unique, and nonstandard (meaning not readily available on
the market by the average user) or be designed to be professionally installed (professional here indicates a person
trained in RF installation and regulations). Since many of the 2.4 GHz products are installed by non-RF trained
personnel, these products must comply with the unique connector ruling. The BR1400 is designed for installation
by a RF professional, and therefore may use a standard N style connector. Cisco Aironet 2.4 GHz products use
Reverse Polarity -TNC (RP-TNC) connectors. While they are similar to the normal TNC connectors, they cannot be
mated to the standard connectors. To ensure compatibility with Cisco Aironet products, use antennas and cabling
from Cisco.
The FCC regulations forbid the use of external antennas in the lower channels of the 5 GHz WLAN band (UNII-1);
therefore, the Cisco Aironet 5 GHz access points and client devices use permenantly attached antennas. This is
covered in more depth later in the regulation section.
For most indoor applications, a .75- or 1-in. electrical conduit provides a suitable mounting. For outdoor application,
a heavy galvanized or aluminum wall mast should be used that will withstand the wind-loading rating of the
selected antenna.
LIGHTNING ARRESTORS
When using outdoor antenna installations, it is always possible that an antenna will suffer damage from potential
charges developing on the antenna and cable, or surges induced from nearby lightning strikes. The BR1400 includes
lightning protection at the power injector, while the Aironet Lightning Arrestor is designed to protect 2.4 GHz radio
equipment from static electricity and lightning-induced surges that travel on coaxial transmission lines. Both systems
need to be properly grounded as identified in the hardware installation manuals of the products. These protection
mechanisms will not prevent damage in the event of a direct lightning hit.
Figure 6
Cisco Aironet Lightning Arrestor
To Antenna
Ground Wire
Lug
Lockwasher
Nut
To RF Device
Installation
This arrestor is designed to be installed between your outdoor antenna cable and the Aironet wireless device.
Installation should be indoors, or inside a protected area. A good ground must be attached to the arrestor. This can
be accomplished by use of a ground lug attached to the arrestor and a heavy wire (no. 6 solid copper) connecting the
lug to a good earth ground. See Figure 6.
Decibels
The decibel (dB) scale is a logarithmic scale used to denote the ratio of one power value to anotherfor example:
An increase of 3 dB indicates a doubling (2x) of power. An increase of 6 dB indicates a quadrupling (4x) of power.
Conversely, a decrease of 3 dB is a halving (1/2) of power, and a decrease of 6 dB is a quarter (1/4) the power. Some
examples are shown below in Table 1.
0 dB 1 x (same) 0 dB 1 x (same)
1 dB 1.25 x -1 dB 0.8 x
3 dB 2x -3 dB 0.5 x
6 dB 4x -6 dB 0.25 x
10 dB 10 x -10 dB 0.10 x
12 dB 16 x -12 dB 0.06 x
dBm mW dBm mW
0 dBm 1 mW 0 dBm 1 mW
Outdoor Range
The range of a wireless link is dependent upon the maximum allowable path loss. For outdoor links this is a
straightforward calculation as long as there is clear line of sight between the two antennas with sufficient clearance
for the Fresnel zone. For line of sight, you should be able to visibly see the remote locations antenna from the main
site. (Longer distances may require the use of binoculars). There should be no obstructions between the antennas
themselves. This includes trees, buildings, hills, and so on.
As the distance extends beyond six miles, the curve of the earth (commonly called earth bulge) affects installation,
requiring antennas to be placed at higher elevations.
Figure 7
Fresnel Zone
Fresnel Zone
Raise Antennas
Based on both line-of-sight and Fresnel zone requirements, Table 3 provides a guideline on height requirements for
2.4 GHz antennas as various distances. This refers to height above any obstacles located in the middle of the RF path.
Wireless Link Approx. Value F (60% Approx. Value C Value H (mounting Ht.)
Distance (miles) Fresnel Zone) ft. at 2.4 GHz (Earth Curvature) Ft. with No Obstructions
1 10 3 13
5 30 5 35
10 44 13 57
15 55 28 83
20 65 50 115
25 72 78 150
Cisco.com provides an Outdoor Bridge Range Calculation Utility for both the 2.4 GHz and 5 GHz products. This
utility calculates the Fresnel zone and maximum range based upon cable types and lengths, transmitter and receiver
models, and antennas. The utility can be found at: www.cisco.com/go/aironet/calculation
A 10 dB fade margin is included for 2.4 GHz calculations, while the included 5dB fade margin for 5 GHz calculations
is sufficient for dependable communications in all weather conditions. The distances given are only theoretical and
should only be used to determine the feasibility of a particular design.
Outdoors, every increase of 6 dB will double the distance. Every decrease of 6 dB will halve the distance. Shorter
cable runs and higher gain antennas can make a significant difference to the range.
North America
ConnectorsIn 1985, the FCC enacted standards for the commercial use of spread spectrum technology in the
ISM frequency bands. Spread spectrum is currently allowed in the 900, 2400, and 5200 MHz bands. In 1989,
the FCC drafted an amendment governing spread spectrum systems in the unlicensed ISM band. This amendment
is commonly referred to as the new or 94 rules because it impacts all spread spectrum products
manufactured after June 23, 1994. Products manufactured before June 23 are not affected by the amendment.
Congress enacted this amendment into law in 1990. The FCC 1994 rules are intended to discourage use of
amplifiers, high-gain antennas, or other means of significantly increasing RF radiation. The rules are further
intended to discourage home brew systems which are installed by inexperienced users and whicheither
accidentally or intentionallydo not comply with FCC regulations for use in the ISM band. Both the original
rules and the amendments sought to enable multiple RF networks to coexist with minimum impact on one
another by exploiting properties of spread spectrum technology. Fundamentally, the FCC 1994 rules intend to
limit RF communications in the ISM band to a well-defined region, while ensuring multiple systems can operate
with minimum impact on one another. These two needs are addressed by limiting the type and gain of antennas
used with a given system, and by requiring a greater degree of RF energy spreading.
The FCC limits the use of the lower four channels (the UNII-1 band) of the 5-GHz band, requiring antennas that
are permnenatly attached to the transmitting device. Due to this, Cisco offers an articulating antenna paddle
with omnidirectional and patch antennas on the 802.11a access point radio module to extend the flexibility
of deployments. For ceiling, desktop, or other horizontal installations, the omnidirectional antenna provides
optimal coverage pattern and maximum range. For wall mount installations, the patch antenna provides a
hemispherical coverage pattern that uniformly directs the radio energy from the wall and across the room. In
omni mode, the antenna gain is 5dBi with a 360-degree radiation pattern; in patch mode, the gain is 6dBi with a
180-degree pattern. Both the omnidirectional and patch antennas provide diversity for maximum reliability, even
in high multi-path environments like offices.
Antenna Gain and Power Output FCC regulations specify maximum power output and antenna gain. For the
UNII3 band, where the BR1400 operates, the FCC limits the transmitter power to 1 watt or 30dBm, and the
antenna gain of an omni directional antenna to 6dBi. For directional antennas operating in a point to point
system, gains of up to 23dBi are permitted. For antennas with gain higher than 23dbi, the transmitter output
power must be reduced 1 dB for every 1 dB above 23dBi the antenna gain increases.
At 2.4 GHz, the maximum transmitter power is also 1 watt. Using this maximum power, the maximum antenna
gain is 6dBi. However, the regulations also define the maximum values in regards to the following two different
system scenarios:
In point-to-multipoint systems, the FCC has limited the maximum EIRP (effective isotropic radiated power) to
36 dBm. EIRP = TX power + antenna gain. For every dB that the transmitter power is reduced, the antenna may
be increased by 1 dB. (29 dBm TX, +7 dB antenna = 36 dBm EIRP, 28 dBm TX, +8 dB antenna = 36 dBm EIRP).
The Cisco Aironet 2.4 GHz Bridge transmitter power is 20 dBm, which is 10 dBm lower than maximum. This
then allows the use of antennas up to 10 dB over the initial 6dBi limit, or 16dBi.
In point-to-point systems for 2.4 GHz systems using directional antennas, the rules have changed. Because a high
gain antenna has a narrow beamwidth, the likelihood is high that it will cause interference to other area users.
Under the rule change, for every dB the transmitter is reduced below 30 dBm the antenna may be increased from
The main issue that comes to question here is, what differentiates a point-to-point from a multipoint system.
In Figure 8, point A communicates to a single point, B, and point B communicates to a single point A; therefore,
it is simple to see that both locations see this as a point-to-point installation.
In Figure 9, point A communicates to more than one (or multiple) points; therefore, point A is operating in a
multipoint configuration, and the largest antenna permitted is 16dBi. Point B or point C can each communicate
to only one point, (point A); therefore, point B and point C actually operate in a single-point or point-to-point
operation, and a larger antenna may be used.
Figure 8
Point-to-Point Wireless Bridge Solution
A B
Figure 9
Point-to-Multipoint Wireless Bridge Solution
A C
AmplifiersThe FCC Rules, Section 15.204-Part C, states External radio frequency power amplifiers shall not
be marketed as separate products... Part D states Only the antenna with which an intentional radiator
(transmitter) is originally authorized may be used with the intentional radiator. This means that unless the
amplifier manufacturer submits the amplifier for testing with the radio and antenna, it cannot be sold in the U.S.
If it has been certified, then it must be marketed and sold as a complete system, including transmitter, antenna,
and coax. It also must be installed exactly this way.
If using a system that includes an amplifier, remember that the above rules concerning power are still in effect. If
the amplifier is 1/2 watt (27 dBm), this means in a multipoint system the maximum antenna gain is only 9dBi,
and in a point-to-point system it is only 15dBi.
Antenna Gain and Power OutputThe ETSI regulations specify maximum EIRP as 20 dBm. Since this includes
antenna gain, this limits the antennas that can be used with a transmitter. To use a larger antenna, the transmitter
power must be reduced so that the overall gain of the transmitter, plus the antenna gain, less any losses in coax,
is equal to or less than +20 dBm. This drastically reduces the overall distance an outdoor link can operate.
AmplifiersSince the ETSI regulation has such a low EIRP, the use of amplifiers is typically not permitted in any
ETSI system.
This channel spacing governs the use and allocation of channels in a multi-access point environment such as an office
or campus. Access points are usually deployed in cellular fashion within an enterprise where adjacent access points
are allocated non-overlapping channels. Alternatively, access points can be collocated using channels 1, 6, and 11 to
deliver 33 Mbps bandwidth to a single area (but only 11 Mbps to a single client). The channel allocation scheme is
illustrated in Figure 10, and the available channels in the different regulatory domains are defined in Table 4 on the
following page.
Figure 10
IEEE 802.11b DSSS Channel Allocations
Channels
1 2 3 4 5 6 7 8 9 10 11 12 13 14
Regulatory Domain
Channel Frequency (MHz) Americas (-A) EMEA (-E) Israel (-I) Japan (-J)
1 2412 X X X
2 2417 X X X
3 2422 X X X X
4 2427 X X X X
5 2432 X X X X
6 2437 X X X X
7 2442 X X X X
8 2447 X X X X
9 2452 X X X X
10 2457 X X X
11 2462 X X X
12 2467 X X
13 2472 X X
14 2484 X
30 MHz 30 MHz
5150 5180 5200 5220 5240 5260 5280 5300 5320 5350
Lower Band Upper Band
Edge Edge
20 MHz 20 MHz
44 5.230 GHz
48 5.240 GHz
60 5.300 GHz
64 5.320 GHz
AIR-ANT5959 Diversity Ceiling-mount diversity indoor antenna with RP-TNCThis antenna was designed for 2dBi
Omnidirectional WLAN applications for frequencies of 2400 to 2500 MHz. The antenna is
omnidirectional and has a nominal gain of 2.2dBi. Its low profile allows it to remain
unnoticed in the ceiling. It comes with a clip that permits it to be mounted to a drop-
ceiling cross member.
AIR-ANT3351 Diversity POS diversity dipoles for use with LMC radio cards with two MMCX connectorsThis 2.2dBi
Omnidirectional antenna contains two standard 2.2dBi dipoles and 59" of cable terminating in two
MMCX connectors. It has a platform with an adhesive backing to raise the antennas
above obstructions.
AIR-ANT4941 Omnidirectional Single dipole antenna with an RP-TNC connector. The antenna provides indoor 2.2dBi
omnidirectional coverage and is designed for use in the 2400-2500 MHz frequency
band. It has a 90-foot articulation radius. It is can be used with all radios that utilize an
RP-TNC antenna connector.
AIR-ANT1728 Omnidirectional Ceiling-mount indoor antenna with RP-TNC connectorThis antenna was designed 5.2dBi
for WLAN applications with frequencies of 2400 MHz to 2500 MHz. The antenna is
omni directional and has a nominal gain of 5.2dBi. It comes with a clip that allows it
to be mounted to a drop-ceiling cross member.
AIR-ANT2506 Omnidirectional Mast-mount indoor/outdoor antenna with RP-TNCThis antenna was designed for 5.2dBi
WLAN applications for frequencies of 2400 MHz to 2500 MHz. The antenna is
omnidirectional and has a nominal gain of 5.2dBi. It is designed to be mounted on a
round mast.
AIR-ANT3213 Diversity Pillar-mount diversity, indoor antenna with two RP-TNCCosmetic antenna ideal for 5.2dBi
Omnidirectional retail or hospital environment. Includes 36 in. of white RG58 cable with a separation
of Siamese co-ax of 10 in. Has a tan cloth covering in a 12 x 5 rectangle. Included are
two mounting brackets that will keep the antenna 6 in. off of the wall.
AIR-ANT24120 Omnidirectional Mast mount outdoor high gain antenna with RP-TNCThis antenna was designed for 12dBi
WLAN applications for frequencies of 2400 MHz to 2500 MHz. The antenna is omni
directional and has a nominal gain of 12dBi. This design uses an elevated center-feed
to produce an elevation pattern with very little "squint" or beam-tilt. It is designed to
be mounted on a round mast.
AIR-ANT1729 Patch Wall mount, indoor/outdoor directional patch antenna. Designed for use with any 6dBi
radio that features an RP-TNC antenna connector. For use in the 2400-2500 MHz
frequency band. The pigtail cable is 30" long.
AIR-ANT2012 Diversity Patch Wall-mount indoor/outdoor antenna with two RP-TNCSimilar to the above patch, 6dBi
but providing diversity antennas in the same package for areas where multipath
problems exist.
AIR-ANT3549 Patch Wall-mount indoor antenna with RP-TNC The patch antenna is a special type of 8.5dBi
antenna unique to data transmission. They work well and fit aesthetically into most
work environments. Mechanically they are small rectangles about _-inch thick. They
are designed to mount flat to a wall and seem to disappear into the wall in most
environments. The radiation pattern is in the shape of a hemisphere. A typical
application would be for coverage of an area where the transmitter is located on the
side of the coverage area.
AIR-ANT2410Y-R Yagi High-gain outdoor directional antenna with RP-TNCThis WLAN antenna is a 10dBi
completely enclosed yagi. It is designed to be used as a bridge antenna between two
networks or for point-to-point communications. It has a nominal VSWR of 1.5:1 and is
less than 2:1 over the entire frequency band. The gain is 10dBi and the half-power
beamwidth is 55 degrees. This antenna is normally mounted on a mast and is
vertically polarized.
Part of BR1310 Patch 2402 to 2497 MHz Patch Array Antenna. When the captured antenna version is 13dBi
(BR1310G-K9) ordered, this antenna is attached to the 1300 AP/Bridge and provides for an integrated
solution with exceptional gain. This antenna is not compatible with other Cisco
Aironet Radio products operating in 2.4 GHz band.
AIR-ANT1949 Yagi High-gain outdoor directional antenna with RP-TNCThis WLAN antenna is a 13.5dbi
completely enclosed 16-element yagi. It is designed to be used as a bridge antenna
between two networks or for point-to-point communications. It has a nominal VSWR
of 1.5:1 and is less than 2:1 over the entire frequency band. The gain is 13.5dBi and
the half-power beamwidth is 30 degrees. This antenna is normally mounted on a
mast and is vertically polarized.
AIR-ANT2414S-R Sector Mast mount outdoor sector antenna with RP-TNCThis antenna was designed for 14dBi
WLAN applications for frequencies of 2400 to 2500 MHz. The antenna is directional
and has a nominal gain of 14dBi. Its flexible mounting bracket allows for either mast
or wall mounting options.
AIR-ANT3338 Dish Very-high-gain outdoor antenna with RP-TNCThis WLAN antenna is a parabolic dish 21dBi
designed to be used as a bridge antenna between two networks or for point-to-point
communications. It consists of an aluminum parabolic reflector and feed antenna.
The antenna features a rugged mount. It also offers 20-degree fine adjustment for
both horizontal and vertical planes. The antenna is provided with hardware for mast
mounting.
Part of AIR-RM-20A Omnidirectional/ This antenna is a dual function, diversity omni or patch antenna. It is permanently 5dBi/
Patch attached to the RM-20A 5 GHz WLAN radio module used with the AP1200 and 6dBi
operates in the UNII-1and UNII-2 bands (5150 to 5350 MHz). When folded flat to the
AP housing, it is in a patch mode, and when moved to any other position it switches
to an omni mode. In both cases it provides diversity antenna performance.
AIR-ANT58G9VOA-N Omnidirectional An omnidirectional antenna, for use with the Cisco Aironet 1400 Series Wireless 9dBi
Bridge. This non-diversity, vertically polarized antenna operates in the UNII-3 band
(5725 to 5825 MHz). The antenna is designed to be mast mounted in an outdoor
environment. The antenna is not compatible with other Cisco Aironet radio products
operating in the 5 GHz frequency band.
AIR-ANT58G10SSA-N Sector A sector antenna for use with the Cisco Aironet 1400 Series Wireless Bridge. This 9.5dBi
non-diversity symmetric antenna operates in the UNII-3 band (5725 to 5825 MHz). The
antenna is designed to be mounted outdoors on a mast or a suitable vertical surface.
The antenna is not compatible with other Cisco Aironet radio products operating in
the 5 GHz frequency band.
Part of BR1410 Integrated Patch 5.8 GHz UNII-3 Patch antenna. When the captured antenna version is ordered, this 22.5dBi
(BR1410-A-K9) antenna is attached to the BR1410 bridge and provides for an integrated solution with
exceptional gain. The antenna is not compatible with other Cisco Aironet radio
products operating in the 5 GHz frequency band.
AIR-ANT58G28SDA-N Dish A parabolic dish antenna for use with the Cisco Aironet 1400 Series Wireless Bridge. 28dBi
This non-diversity parabolic antenna operates in the UNII-3 band (5725 to 5825 MHz).
The antenna is designed to be mounted outdoors on a mast. The antenna is designed
to be used at the hub or client site of a point-to-point installation, or point-to-
multipoint client sites, providing extended range. The antenna is not compatible with
other Cisco Aironet radio products operating in the 5 GHz frequency band.
AIR-CAB100ULL-R Interconnect 100 ft. ultra-low-loss cable with RP-TNC connectors 4.4 dB
AIR-CAB150ULL-R Interconnect 150 ft. ultra-low-loss cable with RP-TNC connectors 6.6 dB
Table 9 Accessories
AIR-ACC2662 Yagi Articulating This mount permits the yagi antenna to be mounted to a flat surface
Mount or a mast, and then be adjusted in both horizontal and vertical angles.
AIR-ACC3354 Lightning Arrestor Provides lightning and related energy surges at the antenna from
reaching the radio circuitry. A ground ring is included.
AIR-ANT5959
5.3" 2.8"
0.9"
Ceiling Bracket
shown for reference
VSWR 1.7:1
Power 5 watts
Gain 2.0dBi
AIR-ANT3351
6.5"
7.0"
2.12"
Cable length36"
Gain 2.2dBi
Polarization Linear
AIR-ANT4941
4.5"
1"
RP-TNC
Power 5 watts
Gain 2dBi
Polarization Linear
AIR-ANT1728
Attaches to Ceiling
Cross Member
9.0"
Gain 5.2dBi
Polarization Vertical
AIR-ANT2506
11.5"
1" Polycarbonate
1.125" Aluminium
Mounting
Clamps
Mast Cable
Gain 5.2dBi
Polarization Vertical
AIR-ANT3213
5" 1"
12"
Gain 5.2dBi
Polarization Vertical
Dimensions (H x W x D) 12 x 5 x 1 in.
AIR-ANT24120
39.5"
VSWR 1.5:1
Gain 12dBi
AIR-ANT2414S-R
4"
6.375"
Variable
2"5"
36"
2"
VSWR 1.5:1
Gain 14dBi
Dimensions (H x W x D) 36 x 6 x 4 in.
AIR-ANT1729
3.75" 0.5"
5.5"
Gain 6dBi
Polarization Linear
AIR-ANT2012
0.173 THRU
4PLACES
Gain 6dBi
Polarization Vertical
AIR-ANT3549
4.88"
Gain 8.5dBi
Polarization Vertical
AIR-ANT2410Y-R
7.25"
3"
Connector RP TNC
Gain 10dBi
Polarization Vertical
AIR-ANT1949
Dimensions and Mounting Specifications Horizontal Radiation Pattern Vertical Radiation Pattern
18"
13.5dB Yagi2.4GHz
Connector RP TNC
Gain 13.5dBi
Polarization Vertical
Dimensions (H x W) 18 x 3 in.
AIR-ANT3338
8 1/2"
COAX
10 1/2" 5" 24"
REF
8 1/2"
Power 5 watts
Gain 21dBi
Polarization Vertical
5dBi Omni Mode Horizontal Radiation Pattern 6dBi Patch Mode Horizontal Radiation Pattern
5dBi Omni Mode Vertical Radiation Pattern 6dBi Patch Mode Vertical Radiation Pattern
Polarization Vertical
AIR-ANT58G9VOA-N
0.75" Dia
17"
1.25" Dia
Elevations Plan (3dB BW) 6 degrees Wind Speed (survival) 125 MPH
AIR-ANT58G100SSA-N
Mounting Bracket
For Mast Mount
For Wall Mount Drain Plug
Antenna
Elevations Plan (3dB BW) 60 degrees Wind Speed (survival) 125 MPH
AIR-ANT58G28SDA-N
Elevations Plan (3dB BW) 4.75 degrees Wind Speed (operational) 100MPH
Cisco Systems has more than 200 offices in the following countries and regions. Addresses, phone numbers, and fax numbers are listed on the
Cisco Web site at www.cisco.com/go/offices
Argentina Australia Austria Belgium Brazil Bulgaria Canada Chile China PRC Colombia Costa Rica Croatia
Czech Republic Denmark Dubai, UAE Finland France Germany Greece Hong Kong SAR Hungary India Indonesia Ireland
Israel Italy Japan Korea Luxembourg Malaysia Mexico The Netherlands New Zealand Norway Peru Philippines Poland
Portugal Puerto Rico Romania Russia Saudi Arabia Scotland Singapore Slovakia Slovenia South Africa Spain Sweden
S w i t z e r l a n d Ta i w a n T h a i l a n d Tu r k e y U k r a i n e U n i t e d K i n g d o m U n i t e d S t a t e s Ve n e z u e l a Vi e t n a m Z i m b a b w e
Copyright 2004 Cisco Systems, Inc. All rights reserved. Aironet, Cisco IOS, Cisco, Cisco Systems, and the Cisco Systems logo are registered trademarks or trademarks of Cisco Systems, Inc. and/or its affiliates in the
United States and certain other countries.
All other trademarks mentioned in this document or Website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company.
(0402R) 203179_ETMG_JS_04.04
DATA SHEET
PRODUCT OVERVIEW
The Cisco Aironet 1300 Series Outdoor Access Point/Bridge Power Injector, as seen in
Figure 1, converts the standard 10/100 BaseT Ethernet interface that is suitable for weather
protected areas to a dual F-Type connector interface for coax cables that are more suitable
for harsh outdoor environments. The Power Injector also provides power to the outdoor unit
over the same cables with a power discover feature and surge protection. To support longer
cable runs from your wireless network switch or router, the Power Injector enables total
cable runs up to 200 meters (Category 5 Cable + Coax). The Cisco Aironet 1300 Series
Outdoor Access Point/Bridge ships with the Power Injector LR2 and an AC power supply.
Figure 1
Power Injector AIR-PWRINJ-BLR2/AIRPWRINJ-BLR2T
The optional Power Injector LR2T takes power from any 12-40 VDC source, not supplied
by Cisco. Typically, the DC source is vehicle or solar power source connected as shown in
Figure 3. The Power Injector provides for installation flexibility when an AC power source
is not available.
Power Strip
Universal
Power Supply
Wiring Closet
Up to 300 ft Up to 300 ft
LAN
Figure 3
Network Diagram for Optional Power Injector AIR-PWRINJ-BLR2T
Power Source
12-40VDC
Wiring Closet
Up to 300 ft Up to 300 ft
LAN
PRODUCT SPECIFICATIONS
Table 1
Power InjectorLR2 The Power Injector LR2 converts the standard 10/100 BaseT Ethernet category 5 RJ-45
interface that is suitable for weather-protected areas to a dual F-Type connector
interface for dual coaxial cables that are more suitable for harsh outdoor
environments. While providing a 100baseT interface to the Cisco Aironet 1300 Series,
the Power Injector LR2 also provides power to the unit over the same cables with a
power discovery feature that protects other appliances from damage should they
accidentally be connected. As an added benefit to the installer, Auto MDIX is built in,
allowing the dual cables to be swapped and while maintaining the same functionality.
To support longer cable runs from your infrastructure network switch or router, the
Power Injector LR is designed to accommodate up to a 100 meter coaxial cable run
plus 100 meters of indoor cat5 cableenabling total cable runs up to 200 meters.
Lightning and surge protection is also included at the F-Type connector interface to
provide added protection to your network infrastructure devices. The LR2 Power
injector requires a Cisco supplied 48V DC source.
Power InjectorLR2T The Power Injector LR2T supports all the functionality of LR2. It is designed for use
in transportation applications and operates with an input voltage range of +12 to
+40VDC. The DC source is provided by the user. The LR2T can therefore be vehicle
or solar powered.
Network Management
Table 2
AIR-PWRINJ-BLR2
AIR-PWRINJ-BLR2T
Configuration and Management The power injector does not require configuration or management.
Physical
Table 3
AIR-PWRINJ-BLR2 AIR-PWRINJ-BLR2T
Operational Temperature -30 to +55C (-22 to 131F) -30 to +55C (-22 to 131F)
Storage Temperature -40 to +85C (-40 to +185F) -40 to +85C (-40 to +185F)
Table 4
AIR-PWRINJ-BLR2 AIR-PWRINJ-BLR2T
ORDERING INFORMATION
To place an order, visit the Cisco Ordering Home Page. For assistance in determining the correct wireless access
point/bridge to order, contact your local account representative.
Table 5
Cisco Systems has more than 200 offices in the following countries and regions. Addresses, phone numbers, and fax numbers are listed on the
C i s c o We b s i t e a t w w w. c i s c o . c o m / g o / o f fi c e s
Argentina Australia Austria Belgium Brazil Bulgaria Canada Chile China PRC Colombia Costa Rica Croatia Cyprus
Czech Republic Denmark Dubai, UAE Finland France Germany Greece Hong Kong SAR Hungary India Indonesia Ireland
Israel Italy Japan Korea Luxembourg Malaysia Mexico The Netherlands New Zealand Norway Peru Philippines Poland
Portugal Puerto Rico Romania Russia Saudi Arabia Scotland Singapore Slovakia Slovenia South Africa Spain Sweden
S w i t z e r l a n d Ta i w a n T h a i l a n d Tu r k e y U k r a i n e U n i t e d K i n g d o m U n i t e d S t a t e s Ve n e z u e l a Vi e t n a m Z i m b a b w e
All contents are Copyright 19922004 Cisco Systems, Inc. All rights reserved. Cisco, Cisco Systems and the Cisco Systems logo are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and
certain other countries.
All other trademarks mentioned in this document or Website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company.
(0403R) 203179_ETMG_JS_05.04
DATA SHEET
PRODUCT OVERVIEW
The Cisco Aironet 1300 Series Outdoor Access Point/Bridge (Figure 1) is an 802.11g access point and bridge that provides high-speed and cost-
effective wireless connectivity between multiple fixed or mobile networks and clients. Building a metropolitan-area wireless infrastructure with the
Cisco Aironet 1300 Series provides deployment personnel with a flexible, easy-to-use solution that meets the security requirements of wide-area
networking professionals.
The Cisco Aironet 1300 Series supports the 802.11g standardproviding 54-Mbps data rates with a proven, secure technology while maintaining
full backward compatibility with legacy 802.11b devices. Cisco Systems makes the maintenance and installation of the Cisco Aironet 1300 Series
easy by integrating it with your wired network via the Cisco Structured Wireless-Aware Network (SWAN) framework. Based on Cisco IOS
Software, the Cisco Aironet 1300 Series provides advanced features such as Fast Secure Roaming, quality of service (QoS), and VLANs.
The flexibility of the Cisco Aironet 1300 Series allows it to operate as a wireless bridge, access point, or a workgroup bridge.
Access Point
Engineered specifically for harsh outdoor environments, yet also capable in indoor deployments, the Cisco Aironet 1300 Series is ideal for wireless
LANs (WLANs) requiring external access points. The Cisco Aironet 1300 Series is WiFi-certified as an access point and also supports the innovative
features available with Cisco Aironet and Cisco Compatible client devices.
All contents are Copyright 19922006 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
Page 1 of 19
Bridge
The Cisco Aironet 1300 Series supports either point-to-point or point-to-multipoint configuration to cost-effectively interconnect remote, temporary,
or mobile networks. It can serve as an upgrade or replacement to the Cisco Aironet 350 Wireless Bridge by providing over-the-air compatibility with
existing Cisco Aironet 350 Series wireless bridges. While in bridge mode, client associations are also acceptedeffectively providing simultaneous
bridge and access- point capability.
Workgroup Bridge
As a workgroup bridge, the Cisco Aironet 1300 Series quickly connects any Ethernet-enabled device, such as a laptop or other portable computer,
to a WLAN. By adding a standard Ethernet hub or switch, you can connect up to 255 of these devices to any Cisco Aironet access point or wireless
bridge.
Campus Networks
Whether a typical college campus or corporate offices with multiple buildings, IT professionals are faced with interconnecting local area networks in
each of the buildings. These LANs require cost-effective, high-bandwidth connections with the flexibility and control often not available via leased
lines or cable installations requiring trenching.
Temporary Networks
The variety of temporary solutions is limitless, with applications such as remote military campaigns, short-term office leases, temporary buildings
such as trailers, or even parking lot tent sales. These deployments require a temporary network infrastructure that is rugged, portable, easy to install,
and flexible.
BENEFITS
Industry-Leading Performance
Data rates of 54 Mbps in the 2.4 GHz band
Range of 20 miles (32 kilometers [km]) at 11 Mbps
Aggregate throughputs approaching 28 Mbps
Maximum transmit power of 100 milliwatts (mW) for 802.11b and 30 mW for 802.11g
For vehicle installed deployments, over 100 km per hour speeds at 12 and 24 Mbps with 128 byte packets at 1 percent Packet Error Rate (PER)
Support for antenna diversity
The optional Cisco Aironet Power Injector LR2T takes power from any +12 to +40 VDC source not supplied by Cisco. Typically the DC source
is a vehicle or solar-power source (Figure 5). This power injector provides the flexibility needed when an AC power source is not available.
FEATURES
The Cisco Wireless Security Suite supports Wi-Fi Protected Access (WPA) and Wi-Fi Protected Access 2 (WPA2) providing access control via
per-user, per-session mutual authentication and data privacy via strong dynamic encryption.
Only legitimate clients are allowed to associate with legitimate and authorized network RADIUS servers via authorized access points.
Stronger encryption is provided by WPA with TKIP enhancements such as message integrity check (MIC), per-packet keys via initialization vector
hashing, and broadcast key rotation and by WPA2 with AES.
Support for Port Aggregation Protocol and Cisco Fast EtherChannel Technology
Bandwidth can be increased between bridged networks through the aggregation of multiple bridges at each site via Cisco Fast EtherChannel
technology, Port Aggregation Protocol (PAgP), or routing protocols.
Hot Standby
The Cisco Aironet 1300 Series in access-point mode supports failover to a standby device, thus increasing network uptime.
Load Balancing
The Cisco Aironet 1300 Series distributes user connections across available access points to optimize aggregate throughput.
QoS Support
The Cisco Aironet 1300 Series supports WMM. WMM improves the user experience for audio, video, and voice applications over a Wi-Fi wireless
connection. WMM is a subset of the IEEE 802.11e QoS draft standard, supporting QoS-prioritized media access via the Enhanced Distributed
Channel Access (EDCA) method. The Cisco Aironet 1300 Series also supports prioritization of traffic based on 802.1P tags and 802.1Q priority
values and applies QoS policy accordingly for different application requirements, thus improving the voice and video users experience.
VLAN Support
The Cisco Aironet 1300 Series can manage up to 16 VLANs, which allows customers to differentiate LAN policies and servicessuch as security
and QoSfor different users. The Cisco Aironet 1300 Series also supports 802.1Q trunking.
SUMMARY
The Cisco Aironet 1300 Series is a flexible outdoor 802.11b and 802.11g access point and bridge that provides high-speed and cost-effective
wireless connectivity between multiple fixed or mobile networks and clients.
Product Compatibility
Table 1 outlines the products that are compatible with the Cisco Aironet 1300 Series.
Access-Point Compatibility Compatible with any Wi-Fi certified WPA or WPA2 client device for basic capability
Compatible with Cisco Aironet clients and Cisco Compatible Clients for Extended Capability
Workgroup-Bridge Compatibility Supports operation with Cisco Aironet access points and Cisco bridges
Wireless-Bridge Compatibility Only compatible with other Cisco Aironet 1300 and Aironet 350 series wireless bridges
Protocols
Table 2 lists the protocols supported by the Cisco Aironet 1300 Series.
Table 2. Protocols
Non-Overlapping Channels 3
SecurityAccess-Point Role Cisco Wireless Security Suite supporting WPA and WPA2, including:
Authentication
802.1X support including LEAP, PEAP-GTC, PEAP-MSCHAPv2, EAP Message Digest 5
(EAP MD5), EAP-TLS, EAP-TTLS, EAP-SIM, and EAP-FAST to yield mutual authentication
and dynamic per-user, per-session encryption keys
Encryption
WPA: Cisco TKIP or WPA TKIP; key hashing (per-packet keying), MIC and broadcast key
rotation
WPA2: AES (802.11i)
Table 3. Components
Power Injector LR2 The power injector converts the standard 10/100BASE-T Ethernet Cat5 RJ-45 interface that is suitable for
weather-protected areas to a dual F-Type connector interface for dual coaxial cables that are more suitable for
harsh outdoor environments. While providing a 100BASE- T interface to the Cisco Aironet 1300 Series, the
power injector also provides power to the unit over the same cables with a power-discovery feature that protects
other appliances from damage should they accidentally be connected. As an added benefit to the installer, the
automatic medium-dependent interface crossover (Auto-MDIX) feature is built in, allowing the dual cables to
be swapped while maintaining the same capability. To support longer cable runs from your network switch or
router, the power injector is designed to accommodate up to a 100 meter coaxial cable run plus 100 meters of
indoor Cat5 cable enabling total cable runs up to 200 meters. Lightning and surge protection is also included
at the F-Type connector interface to provide added protection to your network devices. The power injector
requires a 48V DC source supplied by Cisco.
Power Injector LR2T The Power Injector LR2T supports all the capability of LR2. It is designed for use in transportation applications
and operates with an input voltage range of +12 to +40V DC. The DC source is provided by the user. The
LR2T can therefore be vehicle or solar powered.
Interfaces
Table 4 lists the Cisco Aironet 1300 Series interfaces.
Table 4. Interfaces
Status LEDs Four LEDs: Install, Radio, Status, and Ethernet One bicolor LED showing power status
F-Type Connectors Dual coaxial cable carries full-duplex Ethernet, Dual coaxial cable carries full-duplex Ethernet, DC power,
DC power, and full-duplex console port (RS- and full-duplex console port (RS-232 connection)
232 connection)
RJ-45 Interface One RJ-45 connector for console-port access (9600 bps
only), a second RJ-45 connector for 10/100BASE-T LAN
interface
Memory
Table 5 lists the memory requirements for the Cisco Aironet 1300 Series.
Eight Megabytes of Flash Memory Memory space for future firmware upgrades to support new 802.11 standards and advanced features.
Performance
Table 6 lists the Cisco Aironet 1300 Series performance capabilities.
AIR-BR1310G-x-K9 AIR-BR1310G-x-K9-R
Maximum Bridge Over 100 km per hour at 12 and 24 Mbps with 128 byte packets at 1 percent PER
Relative Velocity
* The distances referenced here are approximations and should be used for estimation purposes only.
AIR-PWRINJ-BLR2
AIR-BR1310G-x-K9 and AIR-BR1310G-x-K9-R AIR-PWRINJ-BLR2T
Physical
Table 9 lists the physical specifications of the Cisco Aironet 1300 Series.
AIR-BR1310G-x-K9 and
AIR-BR1310G-x-K9-R AIR-PWRINJ-BLR2 AIR-PWRINJ-BLR2T
Dimensions 8 in. x 8.1 in. x 3.12 in. 4.62 in. x 4.76 in. x 1.07 in. 4.62 in. x 4.76 in. x 1.07 in.
(20.3 cm x 20.57 cm x 7.87 cm) (11.73 cm x 12.09 cm x 2.71 cm) (11.73 cm x 12.09 cm x 2.71 cm)
Operational -22 to +131F (-30 to +55C) -22 to +131F (-30 to +55C) -22 to +131F (-30 to +55C)
Temperature
Storage -40 to +185F (-40 to +85C) -40 to +185F (-40 to +85C) -40 to +185F (-40 to +85C)
Temperature
Humidity 0 to 100% at 100F (38C) 0 to 90% at 100F (38C) 0 to 90% at 100F (38C)
(condensing) (non-condensing) (non-condensing)
Vibration SAEJ1455 section 4.9 SAEJ1455 section 4.9 SAEJ1455 section 4.9
Enclosure NEMA 4; IP56; UL2083; UL2083; metal case UL2083; metal case
Environmentally sealed
Power
Table 10 lists Cisco Aironet 1300 Series power requirements.
AC Power Not requireduses DC voltage from 100 to 240V AC, +/-10% Not required
power injector (Power Supply Provided by Cisco)
Country Compliance Customers are responsible for verifying approval for use in their country. Please see
http://www.cisco.com/go/aironet/compliance to verify approval and to identify the regulatory domain that
corresponds to a particular country. Not all regulatory domains have been approved. As they are approved,
the part numbers will be available on the Global Price List.
Wi-Fi Certification
EMI and FCC Part 15.107 and 15.109 Class B FCC Part 15.107 and 15.109 Class B
Susceptibility ICES-003 Class B (Canada) ICES-003 Class B (Canada)
(Class B) EN 55022 Class B EN 55022 Class B
EN 55024 EN 55024
AS/NZS 3548 Class B AS/NZS 3548 Class B
VCCI Class B VCCI Class B
EN 301.489-1 and 17 (Europe) EN 301.489-1 and 17 (Europe)
Designed to CISPR 25, ISO 11452-24, EN50121,
EN60571 and SAEJ1113
Additional Specifications
Warranty One year
ORDERING INFORMATION
To place an order, visit the Cisco Ordering Home Page. For assistance in determining the correct wireless bridge to order, as well as appropriate
accessories, please read the Cisco Aironet 1300 Series Ordering Guide.
Cisco Systems has more than 200 offices in the following countries and regions. Addresses, phone numbers, and fax numbers are listed on
the Cisco Website at www.cisco.com/go/offices.
Argentina Australia Austria Belgium Brazil Bulgaria Canada Chile China PRC Colombia Costa Rica Croatia Cyprus
Czech Republic Denmark Dubai, UAE Finland France Germany Greece Hong Kong SAR Hungary India Indonesia Ireland Israel
Italy Japan Korea Luxembourg Malaysia Mexico The Netherlands New Zealand Norway Peru Philippines Poland Portugal
Puerto Rico Romania Russia Saudi Arabia Scotland Singapore Slovakia Slovenia South Africa Spain Sweden Switzerland Taiwan
Thailand Turkey Ukraine United Kingdom United States Venezuela Vietnam Zimbabwe
Copyright 2006 Cisco Systems, Inc. All rights reserved. CCSP, CCVP, the Cisco Square Bridge logo, Follow Me Browsing, and StackWise are trademarks of Cisco Systems, Inc.;
Changing the Way We Work, Live, Play, and Learn, and iQuick Study are service marks of Cisco Systems, Inc.; and Access Registrar, Aironet, BPX, Catalyst, CCDA, CCDP, CCIE,
CCIP, CCNA, CCNP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity,
Enterprise/Solver, EtherChannel, EtherFast, EtherSwitch, Fast Step, FormShare, GigaDrive, GigaStack, HomeLink, Internet Quotient, IOS, IP/TV, iQ Expertise, the iQ logo, iQ Net
Readiness Scorecard, LightStream, Linksys, MeetingPlace, MGX, the Networkers logo, Networking Academy, Network Registrar, Packet, PIX, Post-Routing, Pre-Routing, ProConnect,
RateMUX, ScriptShare, SlideCast, SMARTnet, The Fastest Way to Increase Your Internet Quotient, and TransPath are registered trademarks of Cisco Systems, Inc. and/or its affiliates in
the United States and certain other countries.
the
All other trademarks mentioned in this document or Website are 2006 Cisco
property of Systems, Inc.owners.
their respective All rights reserved.
The use of the word partner does not imply a partnership relationship between
Cisco and any other company. (0601R) notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Important
Page 19 of 19
Printed in the USA C78-340315-00 03/06