You are on page 1of 321

FOR MORE INFORMATION

te.com/products/AMPMODUSystem50
te.com/products/AMPMODUMTE

TE Technical Support Center


Internet: te.com/help
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico +52 (0) 55-1106-0800
Latin/S. America: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015

Revised 8-11
Part numbers in this brochure are RoHS Compliant*, unless marked otherwise.
*as defined www.te.com/leadfree

Catalog 1307819
AMPMODU Interconnection System
AMPMODU
te.com

2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved.
Interconnection System
1307819 CIS WR 08/2011
AMP, ACTION PIN, AMP-LATCH, AMP-O-LECTRIC, AMP-O-MATIC, AMPLIMITE, AMPMODU, AMPOMATOR,
CERTI-CRIMP, CHAMPOMATOR, PRO-CRIMPER, R-CAM, TE Connectivity and the TE connectivity (logo)
are trademarks. Teflon is a trademark of E.I. du Pont de Nemours and Company.
Other logos, product and Company names mentioned herein may be trademarks of their respective owners.

While TE has made every reasonable effort to ensure the accuracy of the information in this catalog, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current.
TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all
implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or
fitness for a particular purpose. The dimensions in this catalog are for reference purposes only and are subject to change without notice.
Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications.
AMPMODU Interconnection System

Table of Contents
and PC/104-Plus Connectors
1 PC/104Introduction
PC/104 and PC/104-

5
Plus Connectors

PC/104, Press Fit 6, 7


PC/104-Plus, Press Fit 8, 9
PC/104, Solder 10

1 PC/104-Plus, Solder 11
Accessories, Kits 12

2 0.050 [1.27] x 0.050 [1.27] CENTERLINE


AMPMODU 50/50 Grid
[1.27 x 1.27]

Board-to-Board Vertical Receptacles and Headers:


.050 x .050

Centerline

Introduction 13, 14
Vertical Receptacles, Double Row 15

2 Vertical Headers, Double Row 16


Recommended PC Board Layouts 17
Board-to-Board Right-Angle Headers:
Introduction 18
Right-Angle Headers, Double Row, Latching and Non-Latching 19
[1.27 x 2.54]
.050 x .100

Centerline

Cable-to-Board Connectors:
Introduction 20

3 Receptacle Connectors, Double Row, With and Without Latch 21


Cable Connector Terminating Cover, Double Row 22
IDC (Insulation Displacement Crimp) Tooling 23
Performance Specifications24
2mm Connectors

Technical Documents 24
AMPMODU

3 .050 [1.27] x 0.100 [2.54] CENTERLINE


AMPMODU System 5025

4 Board-to-Board Connectors, Thru-Hole:


Introduction 26
Headers, Shrouded and Unshrouded 27-35
Introduction 36
Receptacles 37-40
[2.54 x 2.54]
.100 x .100
Centerline

PC Board Hole Layouts 41, 42


Board-to-Board Connectors, Surface-Mount:
Introduction 43

5 Headers 44
Receptacles 45
Cable-to-Board Connectors, FFC Cable:
Introduction 46
[3.18 x 3.18]
.125 x .125

Flexible Flat Conductor Cable 47


Centerline

FFC Contacts 48
Receptacle Housings 49-52

6 ZIF-Line Connectors 53, 54


Cable-to-Board Connectors, Ribbon Cable:
Introduction 55
Ribbon Cable Receptacles 56
Paddleboard Receptacles 57
.156 [3.96]
Centerline

Flat Ribbon Cable 58, 59


Application Tooling for Flex Film Contacts 60

7 Application Tooling 60-62


Performance Specifications63
Technical Documents 64
Shunts

8
2
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Table of Contents (Continued)

4 AMPMODU 2mm Connectors

PC/104 and PC/104-


AMPMODU 2mm Connectors (Board to Board) 65

Plus Connectors
Headers, Unshrouded, Double Row, Thru-Hole Mount 66, 67
Breakaway Headers, Unshrouded, Double Row, Thru-Hole Mount 68-70
Breakaway Headers, Unshrouded, Double Row, Surface Mount 71, 72
Stacking Header, Unshrouded, Double Row, Thru-Hole Mount 73
Headers, Shrouded, Double Row, Thru-Hole, Right-Angle Mount 74, 75
Headers, Shrouded, Double Row, Surface Mount 76, 77
1
Headers, Shrouded, Double Row, Thru-Hole Mount with Cable Shrouds 78, 79
Receptacles, Double Row, Thru-Hole, Vertical Mount80, 81

[1.27 x 1.27]
.050 x .050
Centerline
Receptacles, Double Row, Surface Mount, Right-Angle Mount 82
Receptacles, Double Row, Thru-Hole, Right-Angle Mount 83
Receptacles, Double Row, Surface Mount, Vertical Mount 84

5 .100 [2.54] x .100 [2.54] CENTERLINE


Introduction 85-87
2
Terms Explained 87
Wire Sizes88

[1.27 x 2.54]
.050 x .100
Centerline
Contact Platings 88
Mating Post Lengths 88
Application Tooling 88
Board-to-Board Solutions Guides, .100[2.54] Centerline Products 89
Wire-to-Board Solutions Guide, .100[2.54] Centerline Products89
Mating Post Selection Guide 90
3
Parallel Stacking Guide for Board-to-Board Applications 91

2mm Connectors
Board-to-Board Products:

AMPMODU
Unshrouded Headers 92-100
Breakaway and Retention Headers-Unshrouded 101-105
Reeled Breakaway Headers 106, 107
Surface Mount Breakaway Headers 108-110
Unshrouded Stacking Headers- Breakaway 111-113
4
Shrouded Headers 114-140
Standard Profile 114-133

[2.54 x 2.54]
.100 x .100
Centerline
Low Profile 134-140
Shrouded Stacking Headers 141-144
ACTION PIN Headers 145-149
ACTION PIN Press-Fit Posts 150, 151
Application Tooling for ACTION PIN Posts 152, 153
ACTION PIN Stacking Connectors 154-161
5
Application Tooling for AMP ACTION PIN Stacking Connectors 162
0.025 [0.64] Square Posts 163

[3.18 x 3.18]
.125 x .125
Centerline
0.025 [0.64] Square Continuous Posts164, 165
0.045 [1.14] Square Continuous Posts166, 167
Horizontal Mount Receptacle Assemblies, Mod II 168-173
Vertical Mount Receptacle Assemblies, Mod II & Mod IV 174-184
Surface Mount Vertical Receptacles, Mod IV 185-192
Two-Piece Printed Circuit Board Connectors 193-202
6
Accessories 203-205

.156 [3.96]
Centerline
Wire-to-Board Products:
Locking Clip Contacts and Housings 206-209
Mod IV Contacts and Housings 210-220
Short Point Contacts and Housings 221-224
MTE Interconnection System 225-250
Surface Mount MTE Headers (Right-Angle & Vertical) 251, 252
7
Interchangeable Contacts, Wire Crimp (Snap-In) 253, 254
MT and Shielded MT Connectors 255-265
Shunts

Mini-Tandem Spring Receptacle Contacts 266-269


Application Tooling 270-275
Technical Documents 276-278
8
3
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Table of Contents (Continued)


[3.18] x .125 [3.18] CENTERLINE
6 .125Wire-to-Board
PC/104 and PC/104-

Product:
Plus Connectors

Level V IDC Connectors 279-282

7 .156 [3.96] CENTERLINE


Mod I 0.031 x 0.062 Interconnection System
1 Introduction 283, 284
Receptacles, Vertical and Horizontal Board Mount 285, 286
Receptacle Assemblies, Vertical and Horizontal Board Mount 287-289
Receptacles, Crimp Snap-In (Wire Applied) 290
[1.27 x 1.27]

Receptacle Housings, Standard Profile-Unkeyed (With/Without Strain Relief) 291, 292


.050 x .050

Centerline

Receptacle Housings, Low Profile-Keyed 293


Posts, Machined Applied 294

2 Headers:
Straight Post, Keyed 295, 296
Right-Angle, Keyed 297
Locking Clip Contacts, Crimp Snap-In (Wire Applied) 298
Locking Clip Connector Housings, Single Row, Crimp Snap-In 299
[1.27 x 2.54]
.050 x .100

Centerline

Application Tooling 300-304


Performance Specifications 305
Technical Documents 305
3 8 Shunts
Dual In-Line Package DIP Shunts 306, 307
Post Shunts 308-310
2mm Connectors

Performance Specifications 311


AMPMODU

Technical Documents 311


Part Number Index 313-316

4
[2.54 x 2.54]
.100 x .100
Centerline

5
[3.18 x 3.18]
.125 x .125
Centerline

Restriction on the use of Hazardous Substances Getting the Information You Need

6 (RoHS)
At TE Connectivity (TE) , were ready to support your RoHS
requirements. Weve assessed more than 1.5 million end items/
Our comprehensive on-line RoHS Customer Support Center
provides a forum to answer your questions and support your
RoHS needs. A RoHS FAQ (Frequently Asked Questions) is
components for RoHS compliance, and issued new part num- available with links to more detailed information. You can also
bers where any change was required to eliminate the restricted submit RoHS questions and receive a response within 24 hours
.156 [3.96]

during a normal work week. The Support Center also provides:


Centerline

materials. Part numbers in this catalog are identified as:


RoHS Compliant Part numbers in this catalog are RoHS Cross-Reference from
Compliant, unless marked otherwise. These products comply Non-compliant to Compliant Products

7 with European Union Directive 2002/95/EC as amended 1


January 2006 that restricts the use of lead, mercury, cadmium,
hexavalent chromium, PBB, and PBDE in certain electrical and
electronic products sold into the EU as of 1 July 2006.
Ability to browse RoHS
Compliant Products in our
on-line catalog RoHS
Downloadable Technical Data
NOTE: For purposes of this catalog, included within the defini- Customer Information Customer
tion of RoHS Compliant are products that are clearly Out of Presentation
Support
Shunts

Scope of the RoHS Directive such as hand tools and other More detailed information
non-electrical accessories. regarding the definitions Center
8 NOTE: Information regarding RoHS compliance is provided
based on reasonable inquiry of our suppliers and represents our
current actual knowledge based on the information provided by
our suppliers. This information is subject to change. For latest
used above
So whatever your questions when it comes to RoHS,
we have the answers at www.te.com/leadfree
compliance status, refer to our website referenced at right.

4
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
PC/104 and PC/104-Plus
AMPMODU Interconnection System

Connectors
PC/104 and PC/104-Plus Connectors

Product Facts
Press fit design
eliminates hand soldering
Unitized PC/104 connector

assembly eliminates two


piece (64 pin & 40 pin)
configuration
Integral board spacers with
captive hardware eases
& improves assembly
efficiency while minimizing
stocked hardware
Flat-rock insertable no
need for complex insertion
tooling
Recognized by Underwriters'
Laboratories to US
and Canadian
standards
file No. E28476
Fully compliant with PC104
& PC104-Plus standards
Solutions available for lead
free processes (ie. ENIG The PC/104 and PC/104-Plus Performance Specifications Need more information?
and silver immersion plated connectors are industry Electrical Characteristics Call Technical
PCB's) standard product offerings Support 1-800-522-6752:
Meets requirements of PC/104 and
which comply with the PC/104-Plus standards
interconnection require- Technical Support is staffed
Nominal Resistance with specialists well versed
ments defined by the 10 milliohms maximum, D R
PC/104 organization in all TE products. The
Insulation Resistance Center can provide you
(http://www.pc104.org) 1000 megohms minimum
with:
Both products are designed Dielectric Withstanding Voltage Technical Support
specifically for flat-rock 500 VAC for 1 min. at sea level Catalogs
press-fit installation for ease Mechanical Characteristics Technical Documents
of application. Solder ver- TE Authorized Distributor
Meets requirements of PC/104 and
sion is also available. PC/104-Plus standards Locations
Optional integral standoffs Current Signal application only
minimize the customers Temperature 55 to 105C
system assembly time.
Material and Finish
The TE offering of the Housing Black Thermoplastic, UL
standard PC/104 product is 94V-0
a unitized connector rather Contact Phosphor Bronze, Full Gold
than the two piece, 40 and all over Nickel (stackthrough), Gold on
64 position connectors mating end, Tin or Tin-lead on PCB tail
currently on the market. all over Nickel (non-stackthrough)
Customer needs to stock
and apply only one part
number rather than two.

Connector Centerline Position


.100
PC/104 104*
Technical Documents 2.54
Product Specifications .079
PC/104-Plus 120**
2.0
108-1956
*Two circuits plugged per PC/104 specification.
Application Specifications Other options available.
114-13021 **One circuit plugged per PC/104-Plus specifica-
tion. Other options available.

5
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
PC/104 and PC/104-Plus

AMPMODU Interconnection System


Connectors

PC/104, Press-Fit
Material and Finish
Housing Glass filled thermoplastic,
Black, 94V-0 rated
Contacts

1 Stackthrough Phosphor Bronze;


plated .000015 [0.00038] min. Gold on
mating receptacle end, .000005 [0.000130]
min. Gold on remainder, all over .000050
[0.00127] Nickel
or
Phosphor Bronze; plated .000015 [0.00038]
min. Gold on mating receptacle end,
.000100-.000200 [0.000254-.00508] matte
tin on compliant section, .000005
{0.000130] min. Gold on remainder of post,
all over .000050 [0.00127] Nickel
Non-Stackthrough Phosphor Bronze;
plated .000015 [0.00038] min. Gold on
mating receptacle end, .000100 [0.00254]
matte tin or tin-lead on remainder, all over
.000050 [0.00127] Nickel
Screwlocks Steel, Clear Chromate
over Zinc

Stackthrough, No Standoffs Non-Stackthrough, No Standoffs


Gold plated contacts* Tin-lead plated tails*
Part No. 1375795-1 (keyed), Part No. 1375795-2 (unkeyed) Part No. 1375796-1 (keyed), Part No. 1375796-2 (unkeyed)
Gold plated contacts with Tin plated compliant pin section** Matte tin plated tails**
Part No. 1375795-3 (keyed), Part No. 1375795-4 (unkeyed) Part No. 1375796-3 (keyed), Part No. 1375796-4 (unkeyed)

.435
[11.05] .435
[11.05]

.100
Typ.
[2.54] .119.013
.100
.100 .100 Typ. [3.030.34]
Typ. Typ. [2.54]
[2.54] [2.54] .483.013 Typ.
.025 Sq. [12.270.34]
[0.64] Typ. Typ. 3.21 .195
3.21 [81.60] [4.95]
.195
2.01 Typ. .390
[81.60] [4.95] Plugged
2.01 [51.11] [9.90]
Typ. .390 Circuit
Plugged
[51.11] [9.90]
Circuit

Plugged
Plugged Circuit
Circuit

3.10 .300 3.10 .300


[78.74] [7.62] [78.74] [7.62]

Keyed Unkeyed
Recommended PC Board Layout
See Customer Drawing for
Hole Geometry and Recommended Plating.

Note: All part numbers are RoHS compliant.


* For RoHS exempt Tin-lead processes (including ENIG Plated PCBs)
** for Silver Immersion processes or where a total lead free solution is desired
6
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
PC/104 and PC/104-Plus
AMPMODU Interconnection System

Connectors
PC/104, Press-Fit (Continued)
Stackthrough, 2 Standoffs Non-Stackthrough, 2 Standoffs
Gold plated contacts* Tin-lead plated tails*
Part No. 1375793-1 (keyed), Part No. 1375793-2 (unkeyed) Part No. 1375794-1 (keyed), Part No. 1375794-2 (unkeyed)

Gold plated contacts with Tin plated compliant pin section** Matte tin plated tails**
Part No. 1375793-3 (keyed), Part No. 1375793-4 (unkeyed)
.435
[11.05]
Part No. 1375794-3 (keyed), Part No. 1375794-4 (unkeyed)

.435
1
[11.05]
.600
Typ.
[15.24]
.600
Typ.
[15.24]

.100 .100 .100


.100 Typ. .119.013
Typ. [2.54] [2.54] [2.54]
.4830.13 [3.030.34]
[2.54] Typ. Typ.
[12.270.34] Typ.
.025 Sq. Typ.
[0.64] Typ. 3.21 .195
[81.60] [4.95]
3.21 .195 Typ. .390
Plugged 2.01
[81.60] [4.95] [9.90]
Circuit [51.11]
Plugged 2.01 Typ. .390
Circuit [51.11] [9.90]

Plugged
Circuit
Plugged
Circuit

Stackthrough, 4 Standoffs Non-Stackthrough, 4 Standoffs


Gold plated contacts* Tin-lead plated tails*
Part No. 1375791-1 (keyed), Part No. 1375791-2 (unkeyed) Part No. 1375792-1 (keyed), Part No. 1375792-2 (unkeyed)

Gold plated contacts with Tin plated compliant pin section** Matte tin plated tails**
Part No. 1375791-3 (keyed), Part No. 1375791-4 (unkeyed) Part No. 1375792-3 (keyed), Part No. 1375792-4 (unkeyed)
.435
[11.05] .435
[11.05]
.600
Typ. .600
[15.24] Typ.
[15.24]

.100 .100 .119.013


Typ. Typ.
.100 [2.54] [2.54]
.100 Typ. [3.030.34]
Typ. [2.54] .483.013
[2.54] [12.270.34] Typ.
.025 Sq. Typ.
[0.64] Typ. 3.21 .195
[81.60] [4.95]
3.21 .195 2.01 Typ. .390
[81.60] [4.95] Plugged
Circuit [51.11] [9.90]
Plugged 2.01 Typ. .390
Circuit [51.11] [9.90]

Plugged
Breakaway Standoffs Circuit
Plugged
Breakaway Standoffs Circuit

0.05 3.10 .300 0.05 3.10 .300


[1.27] [78.74] [7.62] [1.27] [78.74] [7.62]

.125 Dia. .125 Dia.


[3.18] 2 Plcs. [3.18] 2 Plcs.

Keyed Unkeyed
Recommended PC Board Layout
See Customer Drawing for
Hole Geometry and Recommended Plating.
Note: All part numbers are RoHS compliant.
* For RoHS exempt Tin-lead processes (including ENIG Plated PCBs)
** for Silver Immersion processes or where a total lead free solution is desired
7
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
PC/104 and PC/104-Plus

AMPMODU Interconnection System


Connectors

PC/104-Plus, Press-Fit
Material and Finish
Housing Glass filled thermoplastic,
Black, 94V-0 rated
Contacts

1 Stackthrough Phosphor Bronze;


plated .000015 [0.00038] min. Gold on
mating receptacle end, .000005 [0.000130]
min. Gold on remainder, all over .000050
[0.00127] Nickel
or
Phosphor Bronze; plated .000015 [0.00038]
min. Gold on mating receptacle end,
.000100-.000200 [0.000254-.00508] matte
tin on compliant section, .000005
{0.000130] min. Gold on remainder of post,
all over .000050 [0.00127] Nickel
Non-Stackthrough Phosphor Bronze;
plated .000015 [0.00038] min. Gold on
mating receptacle end, .000100 [0.00254]
matte tin or tin-lead on remainder, all over
.000050 [0.00127] Nickel
Screwlocks Steel, Clear Chromate
over Zinc

Stackthrough, No Standoffs Non-Stackthrough, No Standoffs


Gold plated contacts* Tin-lead plated tails*
Part No. 1375799-1 (unkeyed) Part No. 1375800-1 (unkeyed)
Part No. 1375799-2 (keyed-A1) per PC/104-Plus specification Part No. 1375800-2 (keyed-A1) per PC/104-Plus specification
Part No. 1375799-3 (keyed-D30) per PC/104-Plus specification Part No. 1375800-3 (keyed-D30) per PC/104-Plus specification

Gold plated contacts with Tin plated compliant pin section** Matte tin plated tails**
Part No. 1375799-4 (unkeyed) Part No. 1375800-4 (unkeyed)
Part No. 1375799-5 (keyed-A1) per PC/104-Plus specification Part No. 1375800-5 (keyed-A1) per PC/104-Plus specification
Part No. 1375799-6 (keyed-D30) per PC/104-Plus specification Part No. 1375800-6 (keyed-D30) per PC/104-Plus specification

.368
[9.35]

.368
[9.35]

.079 .079
.079 Typ. .079 Typ.
Typ. [2.00] .483.013 Typ. [2.00] .112.013
[2.00] [2.00] [2.850.34]
[12.270.34]
.020 Sq. Typ. Typ.
[0.51] Typ.

Plugged Plugged
Circuit Circuit
(-3 or -6 only) .315 (-3 or -6 only) .315
[8.00] [8.00]

Plugged Plugged
Circuit Circuit
(-2 or -5 only) 2.37 .015 (-2 or -5 only) 2.37 .015
[60.30] [0.39] [60.30] [0.39]

.236 .236 .236


[6.00] [6.00] [6.00]

2.28 2.28 2.28


[58.0] [58.0] [58.0]

Recommended PC Board Layout Recommended PC Board Layout Recommended PC Board Layout


for 1375799-1, 1375799-4, for 1375799-2, 1375799-5, for 1375799-3, 1375799-6,
1375800-1, 1375800-4 1375800-2, 1375800-5 1375800-3, 1375800-6
See Customer Drawing for Hole Geometry and Recommended Plating.
(Including ENIG plated PCB's)
Note: All part numbers are RoHS compliant.
* For RoHS exempt Tin-lead processes (including ENIG Plated PCBs)
** for Silver Immersion processes or where a total lead free solution is desired
8
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
PC/104 and PC/104-Plus
AMPMODU Interconnection System

Connectors
PC/104-Plus, Press-Fit (Continued)
Non-Stackthrough, 2 Standoffs .368
[9.35]
Tin-lead plated tails*
.600 Typ.
Part No. 1375798-1 (unkeyed) [15.24]
Part No. 1375798-2 (keyed-A1)
per PC/104-Plus specification
Part No. 1375798-3 (keyed-D30)
per PC/104-Plus specification

Matte tin plated tails**


0.79
[2.00]
Typ.

Plugged
.112.013 Typ.
[2.850.34] 0.79
[2.00]
Typ. 1
Part No. 1375798-4 (unkeyed), Circuit
.315
Part No. 1375798-5 (keyed-A1) (-3 and -6 only)
[8.00]
per PC/104-Plus specification
Part No. 1375798-6 (keyed-D30)
per PC/104-Plus specification
Plugged
Circuit 2.37 .015
(-2 and -5 only) [60.30] [0.39]

Stackthrough, 2 Standoffs
Gold plated contacts*
.600 Typ.
Part No. 1375797-1 (unkeyed) [15.24]
Part No. 1375797-2 (keyed-A1)
per PC/104-Plus specification
Part No. 1375797-3 (keyed-D30) .368 .483.013
Typ.
per PC/104-Plus specification [9.35] [12.270.34]

0.79 .079
Gold plated contacts with Tin Typ. Typ.
[2.00] [2.00]
plated compliant pin section** .020 Sq.
Part No. 1375797-4 (unkeyed) [0.51] Typ.
Part No. 1375797-5 (keyed-A1)
per PC/104-Plus specification Plugged
Part No. 1375797-6 (keyed-D30) Circuit
.315
per PC/104-Plus specification (-3 and -6 only)
[8.00]

Plugged
Circuit 2.37 .015
(-2 and -5 only) [60.30] [0.39]

Recommended PC Board Layout Recommended PC Board Layout


for 1375797-1, 1375797-4, for 1375797-2, 1375797-5,
1375798-1, 1375798-4 1375798-2, 1375798-5

Recommended PC Board Layout


for 1375797-3, 1375797-6,
1375798-3, 1375798-6

See Customer Drawing for


Hole Geometry and Recommended Plating.
Note: All part numbers are RoHS compliant.
* For RoHS exempt Tin-lead processes (including ENIG Plated PCBs)
** for Silver Immersion processes or where a total lead free solution is desired
9
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
PC/104 and PC/104-Plus

AMPMODU Interconnection System


Connectors

PC/104, Solder
Material and Finish Non-Stackthrough, No Standoffs .435
[11.05]
Housing Glass filled thermoplastic, Part No. 1375963-3 (keyed)
Black, 94V-0 rated Part No. 1375963-4 (unkeyed)
Contacts
.100

1 Non-Stackthrough Phosphor Bronze; .100 Typ.


Typ. [2.54] .119.013
[2.54]
plated .000015 [0.00038] min. Gold on [3.030.34]
mating receptacle end, .000100 [0.00254] 3.21 .195 Typ.
matte tin on remainder, all over .000050 [81.60] [4.95]
2.01 Typ. .390
[0.00127] Nickel Plugged
[51.11]
Circuit [9.90]
Screwlocks Steel, Clear Chromate
over Zinc

Plugged
Circuit
3.10 .300 3.10 .300
[78.74] [7.62] [78.74] [7.62]

Plated Through Hole


.041.003 Dia.
[1.030.08] 102 Plcs.
Keyed Unkeyed
Recommended PC Board Layout

Non-Stackthrough, 2 Standoffs Non-Stackthrough, 4 Standoffs


Part No. 1375961-3 (keyed) Part No. 1375959-3 (keyed)
Part No. 1375961-4 (unkeyed) Part No. 1375959-4 (unkeyed)

.435 .435
[11.05] [11.05]

.600 .600
Typ. Typ.
[15.24] [15.24]

.100 .100 .100 .100 .119.013


Typ. .119.013 Typ. Typ.
[2.54] [2.54] [2.54] [2.54] [3.030.34]
Typ. [3.030.34]
Typ.
Typ.
3.21 .195 3.21 .195
[81.60] [4.95] [81.60] [4.95]
Plugged 2.01 Typ. .390 2.01 Typ. .390
Plugged
Circuit [51.11] [9.90] Circuit [51.11] [9.90]

Plugged Plugged
Circuit Circuit
Breakaway Standoffs

0.05 3.10 .300 0.05 3.10 .300


[1.27] [78.74] [7.62] [1.27] [78.74] [7.62]

.125 Dia. Plated Through Hole .125 Dia.


[3.18] 2 Plcs. .040.003 Dia. [3.18] 2 Plcs.
[1.010.08] 102 Plcs.

Keyed Unkeyed
Recommended PC Board Layout

Note: All part numbers are RoHS compliant.


10
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
PC/104 and PC/104-Plus
AMPMODU Interconnection System

Connectors
PC/104-Plus, Solder
Material and Finish Non-Stackthrough, No Standoffs
Housing Glass filled thermoplastic, Part No. 1375967-4 (unkeyed)
Black, 94V-0 rated Part No. 1375967-5 (keyed-A1)
Contacts per PC/104-Plus specification
Part No. 1375967-6 (keyed-D30)
Non-Stackthrough Phosphor Bronze;
plated .000015 [0.00038] min. Gold on
mating receptacle end, .000100 [0.00254]
matte tin on remainder, all over .000050
per PC/104-Plus specification .368
[9.35] 1
[0.00127] Nickel
Screwlocks Steel, Clear Chromate
.079
over Zinc .079
Typ. [2.00]
Typ.
.112.013
[2.00] [2.850.34]
Plugged Typ.
Circuit
(-6 only) .315
[8.00]

Plugged
Circuit
(-5 only) 2.37 .015
[60.30] [0.39]

Plated Through Hole Plated Through Hole Plated Through Hole


.236 .035.003 Dia. .236 .035.003 Dia. .236 .035.003 Dia.
[6.00] [0.880.08] 120 Plcs. [6.00] [0.880.08] 119 Plcs. [6.00] [0.880.08] 119 Plcs.

2.28 2.28 2.28


[58.0] [58.0] [58.0]

Recommended PC Board Layout Recommended PC Board Layout Recommended PC Board Layout


for 1375967-4 for 1375967-5 for 1375967-6

.368
Non-Stackthrough, 2 Standoffs [9.35]
Part No. 1375965-4 (unkeyed) .600 Typ.
Part No. 1375965-5 (keyed-A1) [15.24]
per PC/104-Plus specification
Part No. 1375965-6 (keyed-D30)
per PC/104-Plus specification .079 .112.013 Typ.
Typ.
[2.00] [2.850.34] 0.79
Typ.
[2.00]
Plugged
Circuit
.315
(-6 only)
[8.00]

Plugged
Circuit
2.37 .015
(-5 only)
[60.30] [0.39]

Plated Through Hole


.035.003 Dia.
[0.880.08] 119 Plcs.

Recommended PC Board Layout for 1375965-4 Recommended PC Board Layout for 1375965-5
Plated Through Hole
.035.003 Dia.
[0.880.08] 119 Plcs.

Note: All part numbers are RoHS


compliant. Recommended PC Board Layout for 1375965-6
11
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
PC/104 and PC/104-Plus

AMPMODU Interconnection System


Connectors

Accessories

Shroud, PC/104-Plus 2.53 0.10


[64.36 0.25]
Part No. 1375801-1
.450 .010 2.45
[11.43 0.25] [62.34]

Material PBT, Black

1 .440 .003
.370
[9.41]
.039
Typ. .079
[11.18 0.08] [1.00] Typ.
[2.00]

.255
Typ.
[6.47]

2.39 .333
[60.76] [8.46]

Organizer, PC/104 3.21


.195
Part Number 1445251-1 [4.95] Typ. [81.60]
.05 [1.27] Typ. .10 [2.54] Typ.
.10
[2.54] Typ.
Material Polyester, PBT, Black
.390
[9.90]
.05
[1.27] Typ.
2.01
[51.11]

Kit Packaging Component Part Number


Part Number Style
Part Numbers Connector Assembly Organizer
1445441-3 1375795-3 1445251-1 Keyed
1445441-4 1375795-4 1445251-1 Unkeyed
1445440-3 1375793-3 1445251-1 Keyed
1445440-4 1375793-4 1445251-1 Unkeyed
1445439-3 1375791-3 1445251-1 Keyed
1445439-4 1375791-4 1445251-1 Unkeyed

Keyed Keyed Keyed


Circuits Circuits Circuits

Part No. 1445441-3 Part No. 1445440-3 Part No. 1445439-3

Note: All part numbers are RoHS compliant.


12
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

AMPMODU 50/50 Grid Connector System

Receptacles and Headers


Board-to-Board Vertical
Right-Angle Headers,
Board-to-Board (Page 19)

Vertical Headers,
Board-to-Board
(Page 16)

Receptacles,

2
Cable-to-Board,
With Latch
(Page 21)

Vertical Receptacles,
Board-to-Board
(Page 15)

Receptacles,
Cable-to-Board
Without Latch Vertical Headers,
(Page 21) Board-to-Board
(Page 16)

Vertical Headers,
Board-to-Board
(Page 16):
.250 [6.35] Stack Height
.320 [8.13] Stack Height
.390 [9.91] Stack Height

Vertical Receptacles,
Board-to-Board
(Page 15)

Produced under a Quality


Management System certi-
fied to ISO 9001
A copy of the
certificate is available ISO900e1d
i
upon request. rtif
Ce

13
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Board-to-Board Vertical Receptacles and Headers

Product Facts
Receptacles and Headers

Surface-mount products for


Board-to-Board Vertical

parallel board-to-board
applications, as well as
right-angle board-to-board
and cable-to-board
applications
High density .050 x .050
[1.27x1.27] centerline grid
Three board-to-board stack
heights: .250 [6.35], .320

2 [8.13] and .390 [9.91]


Non-protrusive metallic
holddowns
Reliable dual beam
receptacle contacts for
redundant contact
Duplex plated receptacle
and post contacts; gold
plated on mating areas,
tin plated on tails
Compatible with standard
surface-mount processing
(VPR and IR)
Receptacle and header allow
for drainage of processing
fluids AMPMODU 50/50 Grid PC boards and allow and packaging methods
Vertical Headers and surface mounting to both result in a system that is
Tape and reel packaging
Receptacles are designed sides of the board. In compatible with robotic
available. Contact TE for parallel board-to-board addition to providing assembly.
for details stacking in high density retention during processing, The headers and
Polarized header and recep- applications. the holddowns are soldered receptacles feature
tacle assemblies during reflow and therefore
Right-angle board-to-board polarization to prevent
Sizes of 10, 20, 30, 40, 50, and cable-to-board provide long-term strain relief misalignment.
60, 70, 80 and 100 positions applications are also for the solder joints.
Recognized under the possible, since the vertical AMPMODU 50/50 Grid Three Board Stack Heights
Component Program of receptacles also mate with Vertical Headers and
Underwriters non-latching right-angle Receptacles are designed
Laboratories Inc., headers (page 19) and the to be compatible with
.250.006
File No. E28476 R vertical headers also mate standard surface-mount [6.350.15]

Certified by
with non-latching cable processes; IR (infrared) and
Canadian Standards connectors. VPR (vapor phase reflow).
Association Available are double row, The surface-mount
File No. LR7189
R

vertical shrouded headers connectors have been


and receptacles in sizes designed so that
ranging from 10 through dimensioning, tolerances,
100 positions (in 10 position referenced datums,
increments). holddown characteristics .320.006
[8.130.15]

Parallel board-to-board
stack heights of .250 [6.35], Non-Protrusive
.320 [8.13] and .390 [9.91] Metallic Holddowns
are achievable by selection
of the appropriate header.
The receptacle is the same
for all three stack height
headers. .390.006
[9.910.15]
Non-protrusive metallic
holddowns are designed for
use in .062 [1.57] or thicker
14
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Board-to-Board Vertical Receptacles, Double Row, .050 x .050


[1.27 x 1.27] Centerline

Vertical Receptacles,
Double Row
A .028
.120
[0.71]
[3.05]

Material and Finish .050


[1.27]
HousingGlass-filled thermoplastic,
black, 94V-0 rated
ContactsCopper alloy; duplex plated
.000030 [0.00076] gold in mating area,
.000150 [0.00381] tin on solder tail,
Polarizing Tab
(For Polarization to
Mating Header) 2
with entire contact underplated .000050
[0.00127] nickel
HolddownCopper alloy; plated .050 .187
.000150 [0.00381] tin over .000050 [1.27] [4.75]
[0.00127] nickel

.050
[1.27]
Related Product Data
Mating Headers pages 16, 19
PC Board Layouts page 17
Performance Specifications
page 24

Technical Documents page 24


Product Specification 108-1332
Application Specification
114-7010 Receptacle
No. of Dimension Part Numbers
Packaging: Tube or Tape and Reel Pos. A
Tube Tape and Reel* No Hold Down w/Vacuum Cover
10 .266 [6.75] 5-104652-1 5-147384-1 5-147413-1
20 .516 [13.11] 5-104652-2 5-147384-2 5-147413-3
30 .766 [19.46] 5-104652-3 5-147384-3 5-147413-4
40 1.016 [25.81] 5-104652-4 5-147384-4
50 1.266 [32.16] 5-104652-5 5-147384-5 5-147413-2
60 1.516 [38.51] 5-104652-6 5-147384-6
70 1.766 [44.86] 5-104652-7 5-147384-7
80 2.016 [51.21] 5-104652-8 5-147384-8
100 2.516 [63.91] 6-104652-0 5-147384-9
* Parts packaged in tape and reel have vacuum pick and place cover.
See PC Board Layout on page 17.

Note: All part numbers are RoHS compliant.


15
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Board-to-Board Vertical Headers, Double Row, .050 x .050


[1.27 x 1.27] Centerline
.050
[1.27]
Vertical Headers,

.225
Double Row

[5.71]

.050
[1.27]
A
.2255
[5.728]
For .250 [6.35] Mated Height

2 .030
[0.76]
.050
[1.27]

For .320 [8.13] Mated Height .2975


[7.557]

.030 .050
[0.76] [1.27]

.3675
[9.335]
For .390 [9.91] Mated Height

.030 .050
[0.76] [1.27]

Material and Finish Related Product Data Technical Documents page 24


HousingGlass-filled thermoplastic, Mating Receptacles page 15, 21 Product Specification 108-1332
black, 94V-0 rated (without latch only) Application Specification
ContactsCopper alloy; duplex plated PC Board Layouts page 17 114-7010
.000030 [0.00076] gold in mating area, Performance Specifications Packaging: Tube or Tape and Reel
.000150 [0.00381] tin on solder tail, page 24
with entire contact underplated .000050
[0.00127] nickel
HolddownCopper alloy; plated
.000150 [0.00381] tin over .000050
[0.00127] nickel
Header Part Numbers
No. of Dimension .250 [6.35] Mated Height .320 [8.13] Mated Height .390 [9.91] Mated Height
Pos. A
Tape & Reel* Tubes
Tubes Tubes Tape & Reel* Tape & Reel*
Hold Down No Hold Down Hold Down No Hold Down
10 .372 [9.44] 5-104655-1 5-147381-1 5-147121-1 5-104656-1 5-147382-1 5-104693-1 5-147383-1
20 .622 [15.79] 5-104655-3 5-147381-2 5-147121-2 5-104656-2 5-147382-2 5-104693-2 5-147383-2
30 .872 [22.14] 5-104655-4 5-147381-3 5-104656-3 5-147382-3 5-104693-3 5-147383-3
40 1.122 [28.49] 5-104655-5 5-147381-4 5-104656-4 5-147382-4 5-104693-4 5-147383-4
50 1.372 [34.84] 5-104655-6 5-147381-5 5-104656-5 5-147382-5 5-104693-5 5-147383-5
60 1.622 [41.19] 5-104655-7 5-147381-6 5-104656-6 5-147382-6 5-104693-6 5-147383-6
70 1.872 [47.54] 5-104655-8 5-147381-7 5-104656-7 5-147382-7 5-104693-7 5-147383-7
80 2.122 [53.89] 5-104655-9 5-147381-8 5-104656-8 5-147382-8 5-104693-8 5-147383-8
90 2.372 [60.24] 5-104656-9 5-104693-9
100 2.622 [66.59] 6-104655-1 5-147381-9 6-104656-0 5-147382-9 6-104693-0 5-147503-1 5-147383-9
*Parts packaged in tape and reel have vacuum pick and place cover.
See PC Board Layout on page 17.
Note: All part numbers are RoHS compliant.
16
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Recommended PC Board Layouts for Vertical Connectors


Headers

.029

Recommended PC
[0.74]

Board Layouts
.050
[1.27]
B Spaces at .050 [1.27] = C .162
[4.11]

.010
[0.25]
4 Plc.

L of Pattern
C

.182
[4.62]
.091
Detail A

.061
2
[2.31]
[1.54] Detail A
D

Receptacles
.029
[0.74] .050
[1.27]
B Spaces at .050 [1.27] = C .110
[2.79]

L of Pattern
C
.130
[3.30]
.065 Detail A
[1.65]
.060
[1.52]

No. of Receptacle Dimensions Header Dimensions


Pos. B C D B C D
10 4 .200 [5.08] .320 [8.12] 4 .200 [5.08] .322 [8.17]
20 9 .450 [11.43] .570 [14.48] 9 .450 [11.43] .572 [14.52]
30 14 .700 [17.78] .820 [20.83] 14 .700 [17.78] .822 [20.87]
40 19 .950 [24.13] 1.070 [27.19] 19 .950 [24.13] 1.072 [27.22]
50 24 1.200 [30.48] 1.320 [33.53] 24 1.200 [30.48] 1.322 [33.57]
60 29 1.450 [36.83] 1.570 [39.88] 29 1.450 [36.83] 1.572 [39.92]
70 34 1.700 [43.18] 1.820 [46.23] 34 1.700 [43.18] 1.822 [46.27]
80 39 1.950 [49.53] 2.070 [52.58] 39 1.950 [49.53] 2.072 [52.62]
90 44 2.200 [55.88] 2.320 [58.93] 44 2.200 [55.88] 2.322 [58.97]
100 49 2.450 [62.23] 2.570 [65.28] 49 2.450 [62.23] 2.572 [65.32]

Note: Refer to TE Customer


Drawings for additional PC board
layout information and dimensional
tolerances. Note: All part numbers are RoHS compliant.
17
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Board-to-Board Right-Angle Headers

Product Facts
Surface-mount products for
Right-Angle Headers

right-angle board-to-board
Board-to-Board

and cable-to-board
applications
Double-row, right-angle
shrouded headers
High density .050 x .050
[1.27 x 1.27] centerline grid
Latching and non-latching
versions available

2 Non-protrusive metallic
holddowns
Metallic tabs, when
soldered to PC board pad,
provide added mechanical
support
Duplex plated post contacts;
gold plated on mating area,
tin plated on tails
Compatible with standard
surface-mount processing
(VPR and IR)
Standoffs on header
housings allow for drainage
of processing fluids AMPMODU 50/50 Grid design as those used in the
Right-Angle Headers will vertical headers (page 16)
All headers are polarized
accommodate a variety of and receptacles (page 15).
Sizes of 10, 20, 30, 40, 50, high density packaging There are also metallic tabs
60, 70, 80 and 100 positions applications; right-angle that are soldered to the sur-
Recognized under the board-to-board applications faces of the PC board pads
Component Program of when mated with vertical for added support.
Underwriters receptacles (page 15) and AMPMODU 50/50 Grid
Laboratories Inc., R right-angle cable-to-board Right-Angle Headers are
File No. E28476 applications when mated available in double-row, in
with cable connectors either latching or non-
Certified by Canadian
(page 21). The small latching versions, and in
Standards
.050 x .050 [1.27 x 1.27] sizes ranging from 10
Association
centerline contact spacing
R

File No. LR7189 through 100 positions (in 10


allows efficient use of the position increments). The
PC board area. latching version provides
Mechanical support of the positive retention when
headers to the PC board is mated with the latching
provided by non-protrusive cable connector (page 21).
metallic holddowns All headers feature polariza-
designed for .062 [1.57] or tion to help prevent mis-
thicker PC boards. These alignment during mating.
holddowns are of the same

18
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Board-to-Board Right-Angle Headers, Double Row, .050 x .050


[1.27 x 1.27] Centerline

Row, Latching and Non-Latching


Right-Angle Headers, Double
Non-Latching Header

A
.050
[1.27]
.050 Typ.
[1.27]
.213
[5.41]

Latching Header .352


[8.94]
.050
[1.27] 2
.430
[10.92]

.029
[0.74] .047 Dia
Typ [1.19]
Material and Finish .065 Plated-Thru Hole
Housing Liquid crystal polymer, [1.65] B Spaces at (2 Plc)
Typ. .025 C
black, 94V-0 rated [0.64]
=
.140
Contacts Copper alloy; duplex [3.56]
plated .000030 [0.00076] gold in
mating area, .000150 [0.000381] tin on
solder tail, with entire contact under- .340 .085 .305
plated .000050 [0.00127] nickel [8.64] [2.16] [7.75]
Holddown Copper alloy; plated
.0000150 [0.00381] tin over .000050 .190
[0.00127] nickel .175 [4.83]
[4.45] .063 (2 Plc)
.100 [1.57]
Related Product Data [2.54] (2 Plc) .136
Min [3.45]
Mating Receptacles page 15, 21 D (2 Plc)
Performance Specifications
page 24 Note: Refer to TE Customer Recommended PC Board Layout
Drawings for additional PC board
layout information and dimensional
tolerances.
Technical Documents page 24
Product Specification 108-1443
Application Specification
114-7010
Packaging: Tube Dimensions Header
No. of Part Numbers
Pos. A B C D Latching Non-Latching
10 .630 [16.00] 9 .225 [5.72] .550 [13.97] 5-104895-1 5-104894-1
20 .880 [22.35] 19 .475 [12.07] .800 [20.32] 5-104895-2 5-104894-2
30 1.130 [28.70] 29 .725 [18.42] 1.050 [26.67] 5-104895-3 5-104894-3
40 1.380 [35.05] 39 .975 [24.77] 1.300 [33.02] 5-104895-4 5-104894-4
50 1.630 [41.40] 49 1.225 [31.12] 1.550 [39.37] 5-104895-5 5-104894-5
60 1.880 [47.75] 59 1.475 [37.47] 1.800 [45.72] 5-104895-6 5-104894-6
70 2.130 [54.10] 69 1.725 [43.82] 2.050 [52.07] 5-104895-7 5-104894-7
80 2.380 [60.45] 79 1.975 [50.17] 2.300 [58.42] 5-104895-8 5-104894-8
100 2.880 [73.15] 99 2.475 [62.87] 2.800 [71.12] 6-104895-0 6-104894-0

Note: All part numbers are RoHS compliant.


19
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Cable-to-Board Connectors

Product Facts
Double-row receptacle
connectors provide cable-
Cable-to-Board

to-board connection
Connectors

capabilities for vertical


headers (non-latching) and
right-angle headers
(latching and non-latching)
IDC (Insulation
Displacement Crimp) mass
termination of solid or

2 stranded round conductor


.050 [1.27] centerline
ribbon cable with PVC or
polyethylene insulation
Accommodates ribbon cable
conductor sizes of 28 AWG
[0.08-0.09 mm2] and 30
AWG [0.05 mm2] and
insulation diameters up to
.036 [0.91] maximum
Reliable single beam
receptacle contact design
Duplex plated receptacle
contacts; gold plated in
mating area, tin in
termination area These double-row cable stranded round conductor mounted right-angle header.
Terminating covers (sold
connectors, with a .050 x ribbon cable with conductor The cable connector without
separately) provide both .050 [1.27 x 1.27] centerline sizes of 28 AWG [0.08-0.09 a metal latch features
strain relief and protection contact spacing, provide mm2] and 30 AWG [0.05 polarization to help prevent
to the termination area cable-to-board connection mm2] and a maximum mismating. All connectors
capabilities for the insulation diameter of .036 are available in sizes
Sizes of 10, 20, 30, 40, 50, AMPMODU 50/50 Grid [0.91]. During termination, ranging from 10 through
60, 70, 80 and 100 positions Connector System. Cable the terminating covers, 100 positions (in 10 position
Connectors available with or connectors without a latch which must be purchased increments).
without metal latch will mate with the vertical separately, assist in guiding
Connectors without latches headers (page 16), while the wire into the IDC
are polarized to help cable connectors with or contacts, then provide
prevent mismating without a latch can be used strain relief when fully
to mate with the right-angle seated. Actual termination
Recognized under the
headers (page 19). is accomplished with the
Component Program of TE manual tooling shown on
Underwriters The cable connectors
feature reliable single- page 23.
Laboratories Inc., R

File No. E28476 beam IDC (insulation The latching version of the
displacement crimp) cable connector is
Certified by Canadian
contacts which are duplex equipped with a metal latch
Standards
plated with .000030 which provides positive
Association R

[0.00076] gold. These retention of the receptacle


File No. LR7189
contacts can be mass cable connector when
terminated to either solid or mated with a surface-

20
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Cable-to-Board Receptacle Connectors, Double Row, .050 x .050


[1.27 x 1.27] Centerline

Receptacle Connectors, Double


Row, With and Without Latch
A

Material and Finish


Housing Thermoplastic, black,
94V-0 rated
Latch Stainless steel
2
Contacts Phosphor bronze; duplex .280
plated .000030 [0.00076] minimum [7.11]
gold in mating area, .000150 [0.00381]
minimum tin on solder tail, with entire .627
[15.94]
contact underplated .000050 [0.00127] .690
minimum nickel [17.56]

Related Product Data


Mating Headers page 16, 19
(latching)
D
Terminating Covers (Must be
Purchased Separately, 2 Required .120
[3.05]
per Connector) page 22
Termination Tooling page 23
Performance Specifications
page 24 .050
B Spaces at [1.27]
.050 [1.27] = C Typ

Technical Documents page 24


Product Specification 108-1443 .284 .327
Application Specification [7.21] [8.31]
408-9817, 408-9909 .050
[1.27]
Packaging: Tube

Receptacle
No. of Dimensions Part Numbers
Pos. A B C D With Latch Without Latch
10 .578 [14.68] 4 .200 [5.08] .266 [6.76] 5-104892-1 5-104893-1
20 .828 [21.03] 9 .450 [11.43] .516 [13.11] 5-104892-2 5-104893-2
30 1.078 [27.38] 14 .700 [17.78] .766 [19.46] 5-104892-3 5-104893-3
40 1.328 [33.73] 19 .950 [24.13] 1.016 [25.81] 5-104892-4 5-104893-4
50 1.578 [40.08] 24 1.200 [30.48] 1.266 [32.16] 5-104892-5 5-104893-5
60 1.828 [46.43] 29 1.450 [36.83] 1.516 [38.51] 5-104892-6 5-104893-6
70 2.078 [52.78] 34 1.700 [43.18] 1.766 [44.86] 5-104892-7 5-104893-7
80 2.328 [59.13] 39 1.950 [49.53] 2.016 [51.21] 5-104892-8 5-104893-8
100 2.828 [71.83] 49 2.450 [62.23] 2.516 [63.91] 6-104892-0 6-104893-0

Note: All part numbers are RoHS compliant.


21
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Terminating Covers for Cable Connectors


Cable Connector Terminating
Cover, Double Row

Material

2 Glass-filled thermoplastic,
black, 94V-0 rated
A

.191
Related Product Data [4.85]
Connectors used with Covers
page 21
Termination Tooling page 23

Technical Documents page 24


.277
Product Specification 108-1443 [7.04]
Application Specification
408-9817, 408-9909
Packaging: Plastic bag

No. of Dimension Terminator Cover


Pos. A Part Numbers
10 .565 [14.35] 104891-1
20 .815 [20.70] 104891-2
30 1.065 [27.05] 104891-3
40 1.315 [33.82] 104891-4
50 1.565 [39.75] 104891-5
60 1.815 [46.10] 104891-6
70 2.065 [52.45] 104891-7
80 2.315 [58.80] 104891-8
100 2.815 [71.50] 1-104891-0
Note: Terminating covers must be purchased separately, two are required for
each cable connector.

Note: All part numbers are RoHS compliant.


22
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Application Tooling for Cable Connectors


The Manual Miniature

IDC (Insulation Displacement


Application Frame
Assembly 91295-1,

Crimp) Tooling
equipped with a Cover
Closing Kit 543518-1, is
used for the IDC termina-
tion of ribbon cable to the
cable connectors shown on
page 21.
Prior to termination, the
covers must be partially
assembled onto a connec-
tor housing, the cable
inserted between the cov-
ers and contacts and the
2
covers preclosed by hand,
clamping the cable in
place.
In the Manual Miniature
Application Frame
Assembly, the covers are
fully seated to complete the
mass termination and pro- Manual Miniature Application Frame Assembly 91295-1
vide strain relief for the with Cover Closing Kit 543518-1
completed connection.

For tooling information, call


Technical Support Center
1-800-522-6752.

Note: Refer to Tyco Electonics


Instruction Sheets 408-9817 (Frame
Assembly 91295-1) and 408-9909
(Cover Closing Kit 543518-1) for
complete termination/tooling infor-
mation.

Note: All part numbers are RoHS compliant.


23
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Performance Specifications

Board-to-Board Connectors, Vertical and Right-Angle


Performance Specifications/

Mating Force: 6.4 oz (1.78 N] max. per contact


Technical Documents

Unmating Force: 1.0 oz [0.28 N] min. per contact


Durability: Tested to 200 cycles min.
Current Rating: (30C T rise): .5 ampere per contact
Operating Temperature Range: -65C to +105C
Termination Resistance: 16 milliohms max. (initial)
Insulation Resistance: 5000 megohms min. (initial)
Dielectric Withstanding Voltage: 300 VAC

2 Cable-to-Board Connectors
Mating Force: 6.4 oz (1.78 N] max. per contact
Unmating Force Without Latch: .5 oz [0.14 N] min. per contact
Durability: Tested to 200 cycles min.
Current Rating: (10C T rise): .5 ampere per contact
Operating Temperature Range: -65C to +105C
Termination Resistance: 25 milliohms max. (initial and final)
Insulation Resistance: 5000 megohms min. (initial)
Dielectric Withstanding Voltage: 300 VAC

Technical Documents
Various technical documents are available for your use:
Product Specifications describe technical performance characteristics and verification
tests. They are intended for the Design, Component and Quality Engineer.
108-1332 AMPMODU 50/50 Grid Vertical Board-to-Board Connectors
108-1443 AMPMODU 50/50 Grid Right-Angle Board-to-Board and Cable
Connectors
Application Specifications describe requirements for using the product in its intended
application and/or crimping information. They are intended for the Packaging and Design
Engineer and the Machine Setup Person.
114-7010 AMPMODU 50/50 Grid Connector System
Instruction Sheets provide instructions for assembling or applying the product. They are
intended for the Manufacturing Assembler or Operator.
408-9817 Manual Miniature Application Frame Assembly 91295-1
408-9909 Cover Closing Kit 543518-1

Note: All part numbers are RoHS compliant.


24
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

AMPMODU System 50 Connectors

AMPMODU System 50
3
The AMPMODU System 50 Board-mounted thru-hole mating headers (thru-hole or Recognized under the
connector family includes a post headers and surface-mount). Ribbon Component Program of
wide variety of high density receptacle connectors are cable connectors mass Underwriters
board-to-board (thru-hole available for right-angle terminate 30 AWG [0.05 Laboratories Inc. R

and surface-mount) and and vertical mating mm2] solid and 32 AWG File No. E28476
cable-to-board connectors. configurations. Surface- [0.03 mm2] stranded, .025 Certified by
AMPMODU System 50 is mounted connectors are [0.64] centerline ribbon Canadian Standards
composed of one- and two- available in vertical, double cable with PVC or Teflon Association*,
row receptacles and post row styles for parallel insulation. File No. LR 7189
headers on .050 x .100 stacking applications. Connectors for mass *CSA certification pending on
[1.27 x 2.54] spacing Shrouded post headers termination to FFC cable or certain products, as noted.
R

between contacts for provide polarization to flexible etched circuitry Dimensioning:


extreme density and mating cable receptacles have dual beam contacts; Dimensions are in inches and millimeters.
efficient use of printed and aid alignment of mating Values in brackets are metric equivalents. Metric
options include shielded symbols used are:
circuit board area. connectors. Unshrouded cable and solder tabs. Both mm (millimeter)
AMPMODU System 50 headers allow close types of cable connectors
cm (centimeter)
m (meter)
receptacles and header stacking of daughter cards. are available as component mm2 (square millimeter)
C (Celsius)
assemblies can be Vertical stacking connectors parts and as completed N (newton)
categorized in three groups: space parallel mated assemblies.
kg (kilogram)

board-mount headers, boards as shown in the Produced under a


illustration on page 63. The variety of components Quality Management
board-mount receptacles and application possibilities,
and cable-to-board Housings on all board- System certified
mount assemblies are made combined with small size to ISO 9001
receptacles. Receptacle and outstanding quality, ISO900e1d
contacts and mating .015 of high temperature tolerant A copy of the i if
make AMPMODU certificate is available rt
materials and incorporate Ce
[0.38] square posts are System 50 suitable for high upon request.
formed from high stand-offs for free drainage
of flux cleaning solutions. density systems.
conductivity copper alloy
and are selectively plated Cable-to-board connectors
with gold to promote higher have integral latches for
performance and reliability. positive locking to shrouded Teflon is a trademark of E.I. du Pont de
Nemours and Company.

25
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Thru-Hole HeadersShrouded, .050 x .100 [1.27 x 2.54] Centerline,


Board-to-Board

Product Facts
High density; contacts
spaced on .050 x .100
[1.27 x 2.54] centers
Single row; select sizes 4
thru 50 positions
Board-to-Board Connectors,

Double row; select sizes 10


thru 100 positions
Stand-offs for ease of
Thru-Hole

cleaning
High temperature tolerant
thermoplastic housings
Shrouded and unshrouded
headers available in single
and double row, vertical
and right-angle

3 configurations

The AMPMODU System 50 efficient use of printed circuit boards and cable
interconnection system is circuit board area. The connectors, while
designed to better meet headers are available in unshrouded headers allow
industrys need for a high 4 through 50 positions, in close stacking of daughter
density interconnect a single row configuration, cards. Housings for the
system. The Board and 10 through 100 headers are made of black
Mounted Thru-Hole positions, in a double row thermoplastic material with
Headers are available in design. a 94V-0 rating. The
shrouded and unshrouded Board mounted post housings have stand-offs
versions. They are headers are available in for free drainage of flux
composed of single and right-angle and vertical cleaning solutions.
double row post headers configurations. Shrouded
with .050 x .100 post headers provide
[1.27 x 2.54] spacing polarization and alignment
between contacts for features for mating printed
extreme density and

26
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Thru-Hole HeadersShrouded, .050 x .100 [1.27 x 2.54] Centerline,


Board-to-Board (Continued)

Single Row, Right-Angle


with Solder Clips

Solder
Clip

Headers, Shrouded and


Circuit Identification

Unshrouded
.060 .100
[1.52] Feature* [2.54]
2 Plc.

Material and Finish


Housing Glass-filled thermoplastic,
black, 94V-0 rated
Contacts Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder posts, with entire contact
underplated .000050 [0.00127] nickel
3
See Note 2.
Related Product Data
Performance Characteristics See Note 1.
page 63
Mateable Connectors pages 38,
49 & 50
PC Board Hole Layout page 41 No. of Dimension Part Numbers
Pos. A
4 .330 [8.38] 5-104074-7
Technical Documents page 64 5 .380 [9.65] 5-104074-2
6 .430 [10.92] 5-104074-8
Product Specification 108-1093
8 .530 [13.46] 6-104074-0
Application Specification 10 .630 [16.00] 5-104074-1
114-25031
12 .730 [18.54] 6-104074-1
15 .880 [22.35] 5-104074-3
20 1.130 [28.70] 5-104074-4
22 1.230 [31.24] 6-104074-4
25 1.380 [35.05] 5-104074-5
28 1.530 [38.86] 7-104074-0
30 1.630 [41.40] 5-104074-6
36 1.930 [49.02] 6-104074-6
40 2.130 [54.10] 6-104074-7
45 2.380 [60.45] 6-104074-8
50 2.630 [66.80] 6-104074-9
*Circuit identification feature omitted on 4, 5 and 6 position headers.
Notes:
1. Solder Clips located as shown for 10 through 30 position headers.
2. Solder Clips located as shown for 4 through 8 and 36 through 50 position headers.

Note: All part numbers are RoHS compliant.


27
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Thru-Hole HeadersShrouded, .050 x .100 [1.27 x 2.54] Centerline,


Board-to-Board (Continued)

Single Row, Vertical


Headers, Shrouded and
Unshrouded

Circuit Identification
.060 [1.52]
Feature*
2 Plc.

Material and Finish


Housing Glass-filled thermoplastic, Post Length
black, 94V-0 rated (See chart

3
Contacts Copper alloy; duplex below)
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder posts, with entire contact
underplated .00050 [0.00127] nickel

Related Product Data


Performance Characteristics
page 63
Mateable Connectors pages 38,
49 & 50
Board-to-Board Spacing page 63
PC Board Hole Layout page 41 Part Numbers
No. of Dimension Post Length
Pos. A
.100 [2.54] .145 [3.68]
Technical Documents page 64 4 .330 [8.38] 5-104071-7
Product Specification 108-1093 5 .380 [9.65] 5-104071-2
Application Specification 6 .430 [10.92] 5-104071-8
114-25031 8 .530 [13.46] 6-104071-0
10 .630 [16.00] 5-104071-1
12 .730 [18.54] 6-104071-1 5-104804-3
13 .780 [19.81] 6-104071-2
15 .880 [22.35] 5-104071-3 5-104804-2
17 .980 [24.89] 6-104071-3
20 1.130 [28.70] 5-104071-4
22 1.230 [31.24] 6-104071-4
25 1.380 [35.05] 5-104071-5
30 1.630 [41.40] 5-104071-6
36 1.930 [49.02] 6-104071-6
40 2.130 [54.10] 6-104071-7
50 2.630 [66.80] 6-104071-9
*Circuit identification feature omitted on 4, 5, and 6 position headers.

Note: All part numbers are RoHS compliant.


28
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Thru-Hole HeadersShrouded, .050 x .100 [1.27 x 2.54] Centerline,


Board-to-Board (Continued)

Double Row, Right-Angle


with Solder Clips

Headers, Shrouded and


.060 Circuit Identification

Unshrouded
[1.52] Feature*
2 Plc. Solder
Clip

Post Length
(See chart
Material and Finish below)

Housing Glass-filled thermoplastic,


black, 94V-0 rated
Contacts Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder posts, with entire contact
3
underplated .000050 [0.00127] nickel

Related Product Data


Performance Characteristics
page 63
Mateable Connectors pages 40,
45, 51, 52, & 56 See Note 2.
PC Board Hole Layout page 41
See Note 1.

Technical Documents page 64


Product Specification 108-1093
Application Specification
114-25031
Part Numbers
No. of Dimension Post Length
Pos. A
.100 [2.54] .145 [3.68]
8 .330 [8.32] 5-104069-8
10 .380 [9.65] 5-104069-4 6-104477-2
12 .430 [10.92] 5-104477-8
14 .480 [12.19] 6-104069-0
16 .530 [13.46] 6-104069-1
20 .630 [16.00] 5-104069-1 5-104477-2
24 .730 [18.54] 6-104069-2 6-104477-0
26 .780 [19.81] 6-104069-3
30 .880 [22.35] 5-104069-5 5-104477-3
34 .980 [24.89] 6-104069-4
40 1.130 [28.70] 5-104069-6 5-104477-4
50 1.380 [35.05] 5-104069-2 5-104477-5
60 1.630 [41.40] 5-104069-7 5-104477-9
68 1.830 [46.48] 6-104069-8
72 1.930 [49.02] 6-104069-6 5-104477-1
80 2.130 [54.10] 5-104069-3 5-104477-6
100 2.630 [66.80] 6-104069-7 5-104477-7
*Circuit identification feature omitted on 8, 10 and 12 position headers.
Notes:
1. Solder Clips located as shown for 16 through 100 position headers.
2. Solder Clips located as shown for 8 through 12 and 60 through 100 position headers.

Note: All part numbers are RoHS compliant.


29
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Thru-Hole HeadersShrouded, .050 x .100 [1.27 x 2.54] Centerline,


Board-to-Board (Continued)

Double Row, Vertical


Headers, Shrouded and

.060 [1.52]
2 Plc. Circuit Identification
Unshrouded

Feature*

Material and Finish


Housing Glass-filled thermoplastic,

3
black, 94V-0 rated
Contact Copper alloy; duplex plated
.000030 [0.00076] gold in mating area,
.000150 [0.00381] tin on solder posts,
with entire contact underplated .000050
[0.00127]nickel

Related Product Data


Performance Specifications
page 63
Mateable Connectors pages 40,
45, 51, 52, & 56 Post Length
(See chart
Board-to-Board Spacing page 63 below)
PC Board Hole Layout page 41

Technical Documents page 64


Product Specification 108-1093
Application Specification Part Numbers
114-25031 No. of Dimension
Post Length
Pos. A
.100 [2.54] .145 [3.68]
10 .380 [9.65] 5-104068-2
12 .430 [10.92] 5-104068-8
14 .480 [12.19] 5-104068-9
16 .530 [13.46] 6-104068-0 5-104666-9
20 .630 [16.00] 5-104068-1 5-104666-1
24 .730 [18.54] 6-104068-1 6-104666-0
26 .780 [19.81] 6-104068-2
30 .880 [22.35] 5-104068-3 5-104666-2
34 .980 [24.89] 6-104068-3
40 1.130 [28.70] 5-104068-4 5-104666-3
44 1.230 [31.24] 6-104068-4
50 1.380 [35.05] 5-104068-5 5-104666-4
60 1.630 [41.40] 5-104068-6 5-104666-7
68 1.830 [46.48] 6-104068-8 5-104666-8
72 1.930 [49.02] 6-104068-5
80 2.130 [54.10] 6-104068-6 5-104666-5
100 2.630 [66.80] 6-104068-7 5-104666-6
*Circuit identification feature omitted on 10 and 12 position headers.

Note: All part numbers are RoHS compliant.


30
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Thru-Hole HeadersShrouded, .050 x .100 [1.27 x 2.54] Centerline,


Board-to-Board (Continued)

Double Row, Vertical


With Card Slots

Circuit Identification
Feature

Headers, Shrouded and


Unshrouded
.125
[3.18]

Material and Finish


Housing Glass-filled thermoplastic,
black, 94V-0 rated
Contacts Copper alloy; duplex
plated .000030 [0.00076] gold in
3
mating area, .000150 [0.00381] tin
on solder posts, with entire contact
underplated .000050 [0.00127] nickel

Related Product Data


Performance Specifications
page 63
Mateable Connectors page 39
PC Board Hole Layout page 41 No. of Dimension Part
Pos. A Numbers
10 .394 [10.01] 5-104076-5
Technical Documents page 64 20 .644 [16.36] 5-104076-1
Product Specification 108-1093 30 .894 [22.71] 5-104076-6
Application Specification 40 1.144 [29.06] 5-104076-3
114-25031 50 1.394 [35.41] 5-104076-7
60 1.644 [41.76] 5-104076-2
80 2.144 [54.46] 5-104076-4
100 2.644 [67.16] 5-104076-8

Note: All part numbers are RoHS compliant.


31
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Thru-Hole HeadersUnshrouded, .050 x .100 [1.27 x 2.54] Centerline,


Board-to-Board

Single Row, Right-Angle


Headers, Shrouded and
Unshrouded

Material and Finish


Housing Glass-filled thermoplastic,

3
black, 94V-0 rated
Contacts Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder posts, with entire contact
underplated .000050 [0.00127] nickel

Related Product Data


Performance Characteristics
page 63
Mateable Connectors pages 37,
38, 49, & 50
PC Board Hole Layout page 41

Technical Documents page 64


Product Specification 108-1093
Application Specification
114-25031 No. of Dimension Part
Pos. A Numbers
4 .215 [5.46] 5-104186-1
8 .415 [10.54] 5-104186-5
12 .615 [15.62] 5-104186-7
15 .765 [19.43] 5-104186-9
17 .865 [21.97] 6-104186-0
20 1.015 [25.78] 6-104186-1
25 1.265 [32.13] 6-104186-3
30 1.515 [38.48] 6-104186-5
31 1.565 [39.75] 7-104186-0
40 2.015 [51.18] 6-104186-7

Note: All part numbers are RoHS compliant.


32
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Thru-Hole HeadersUnshrouded, .050 x .100 [1.27 x 2.54] Centerline,


Board-to-Board (Continued)

Single Row, Vertical .125


[3.18] .015
[0.38]

.100
[2.54]

Headers, Shrouded and


Unshrouded
.096
.050 Typ. [2.44]
[1.27]

Material and Finish


Housing Glass-filled thermoplastic,

3
black, 94V-0 rated A .100
.048
Contacts Copper alloy; duplex [2.54]
[1.22]
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder posts, with entire contact
underplated .000050 [0.00127] nickel

Related Product Data


Performance Specifications
page 63
Mateable Connectors pages 37,
38, 49, & 50
Board-to-Board Spacing page 63
PC Board Hole Layout page 41

No. of Dimension Part


Technical Documents page 64 Pos. A Numbers
4 .215 [5.46] 5-104178-1
Product Specification 108-1093
6 .315 [8.00] 5-104178-3
Application Specification
8 .415 [10.54] 5-104178-5
114-25031
10 .515 [13.08] 5-104178-6
20 1.015 [25.78] 6-104178-1
25 1.265 [32.13] 6-104178-3

Note: All part numbers are RoHS compliant.


33
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Thru-Hole HeadersUnshrouded, .050 x .100 [1.27 x 2.54] Centerline,


Board-to-Board (Continued)

Double Row, Right-Angle


Headers, Shrouded and
Unshrouded

Material and Finish


Housing Glass-filled thermoplastic,
black, 94V-0 rated
Contacts Copper alloy; duplex

3 plated .000030 [0.00076] gold in


mating area, .000150 [0.00381] tin
on solder posts, with entire contact
underplated .000050 [0.00127] nickel

Related Product Data


Performance Specifications
page 63
Mateable Connectors pages 39,
40, 45, 51 & 52
PC Board Hole Layout page 41

Technical Documents page 64


No. of Dimension Part
Product Specification 108-1093 Pos. A Numbers
Application Specification 10 .265 [6.73] 5-104118-3
114-25031 20 .515 [13.08] 5-104118-7
30 .765 [19.43] 6-104118-0
40 1.015 [25.78] 6-104118-2
50 1.265 [32.13] 5-104118-1
60 1.515 [38.48] 6-104118-4
80 2.015 [51.18] 6-104118-6
100 2.515 [63.88] 6-104118-7

Note: All part numbers are RoHS compliant.


34
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Thru-Hole HeadersUnshrouded, .050 x .100 [1.27 x 2.54] Centerline,


Board-to-Board (Continued)

Double Row, Vertical

.125
[3.18]

.100
[2.54]

.015
[0.38]

Shrouded and Unshrouded


Headers
.050 .100
[1.27] Typ. [2.54]

.100 .196
Material and Finish [2.54] [4.98]

Housing Glass-filled thermoplastic,

3
black, 94V-0 rated
Contacts Copper alloy; duplex .048
plated .000030 [0.00076] gold in [1.22]
mating area, .000150 [0.00381] tin
on solder posts, with entire contact
underplated .000050 [0.00127] nickel

Related Product Data


Performance Characteristics
page 63
Mateable Connectors pages 39,
40, 45, 51, & 52
Board-to-Board Spacing page 63 No. of Dimension Part
PC Board Hole Layout page 42 Pos. A Numbers
8 .215 [5.46] 5-103916-3
20 .515 [13.08] 5-103916-2
Technical Documents page 64 30 .765 [19.43] 5-103916-9
Product Specification 108-1093 36 .915 [23.24] 6-103916-8
Application Specification 40 1.015 [25.78] 6-103916-1
114-25031 50 1.265 [32.13] 6-103916-3
60 1.515 [38.48] 6-103916-4
80 2.015 [51.18] 6-103916-6
100 2.515 [63.88] 6-103916-7

Note: All part numbers are RoHS compliant.


35
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Thru-Hole Receptacles, .050 x .100 [1.27 x 2.54] Centerline,


Board-to-Board

Product Facts
High density; contacts
spaced on .050 x .100
[1.27 x 2.54] centers
Right-angle and vertical
styles
Single row; select sizes 5
thru 50 positions
Double row; select sizes 10
Receptacles

thru 100 positions


Contacts are selectively
plated with gold
Stand-offs for removal of
solder flux

The AMPMODU System 50 Receptacle contacts and


thru-hole receptacles offer mating .015 [0.38] square
a wide variety of high posts are formed from high
density board-to-board conductivity copper alloy
connectors. The .050 [1.27] and are selectively plated
spacing between each with gold for higher
contact provides an performance and reliability.
extremely dense The receptacle housings
interconnect package and are made of black
results in a more efficient thermoplastic, with a 94V-0
use of the printed circuit rating to withstand high
board space. temperatures of reflow
AMPMODU System 50 soldering and incorporate
thru-hole receptacles are stand-offs for free drainage
available in right-angle and of flux cleaning solutions.
vertical configurations and
are composed of single
and double row versions.
The single row versions are
available in select sizes of
5 thru 50 positions and
double row in positions
from 10 thru 100.

36
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Thru-Hole Receptacles, .050 x .100 [1.27 x 2.54] Centerline,


Board-to-Board (Continued)

Single Row, Right-Angle


With Solder Clips

Circuit Identification
Feature

Receptacles
Material and Finish
Housing Glass-filled thermoplastic,
black, 94V-0 rated
Contacts Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder posts, with entire contact See Note 2.
Solder
Clip 3
underplated .000050 [0.00127] nickel
See Note 1.

Related Product Data


Performance Specifications
page 63
Mateable Connectors pages 32
& 33
PC Board Hole Layout page 41 No. of Dimension Part
Pos. A Numbers
10 .544 [13.82] 5-104196-2
Technical Documents page 64 15 .794 [20.17] 5-104196-4
Product Specification 108-1093 20 1.044 [26.52] 5-104196-5
Application Specification Notes:
114-25031 1. Solder Clips located as shown for 10 through 25 position receptacles.
2. Solder Clips located as shown for 5 and 25 position receptacles.

Note: All part numbers are RoHS compliant.


37
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Thru-Hole Receptacles, .050 x .100 [1.27 x 2.54] Centerline,


Board-to-Board (Continued)

Single Row, Vertical


Receptacles

Circuit Identification
Feature

Material and Finish

3
Housing Glass-filled thermoplastic,
black, 94V-0 rated
Contacts Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder posts, with entire contact
underplated .000050 [0.00127] nickel

Related Product Data


Performance Specifications
page 63
Mateable Connectors pages 27, No. of Dimension Part
28, 32, & 33 Pos. A Numbers
Board-to-Board Spacing page 63 10 .544 [13.82] 5-104192-2
PC Board Hole Layout page 41 12 .644 [16.35] 5-104192-3
15 .794 [20.17] 5-104192-4
20 1.044 [26.52] 5-104192-5
Technical Documents page 64 30 1.544 [39.22] 5-104192-7
Product Specification 108-1093
Application Specification
114-25031

Note: All part numbers are RoHS compliant.


38
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Thru-Hole Receptacles, .050 x .100 [1.27 x 2.54] Centerline,


Board-to-Board (Continued)

Double Row, Right-Angle

Receptacles
Circuit Identification
Feature

Material and Finish


Housing Glass-filled thermoplastic,
black, 94V-0 rated
Contacts Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder posts, with entire contact
underplated .000050 [0.00127] nickel
3
Solder
Clip
Related Product Data
Performance Characteristics See Note 2.
page 63
Mateable Connectors pages 31, See Note 1.
34 & 35
PC Board Hole Layout page 41

Technical Documents page 64


Product Specification 108-1093
Application Specification No. of Dimension Part
114-25031 Pos. A Numbers
10 .294 [7.47] 5-103911-1
20 .544 [13.82] 5-103911-2
30 .794 [20.17] 5-103911-7
40 1.044 [26.52] 5-103911-5
50 1.294 [32.87] 5-103911-4
60 1.544 [39.22] 5-103911-3
80 2.044 [51.92] 5-103911-6
100 2.544 [64.62] 5-103911-8
Notes:
1. Solder Clips located as shown for 20 through 100 position receptacles.
2. Solder Clips located as shown for 10, 60, 80 and 100 position receptacles.

Note: All part numbers are RoHS compliant.


39
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Thru-Hole Receptacles, .050 x .100 [1.27 x 2.54] Centerline,


Board-to-Board (Continued)

Double Row, Vertical


Receptacles

Circuit Identification Post Length


Feature (See chart
below)

Material and Finish


Housing Glass-filled thermoplastic,
black, 94V-0 rated
Contacts Copper alloy; duplex

3 plated .000030 [0.00076] gold in


mating area, .000150 [0.00381] tin
on solder posts, with entire contact
underplated .000050 [0.00127] nickel

Related Product Data


Performance Specifications
page 63
Mateable Connectors pages 29,
30, 34, 35 & 44
Board-to-Board Spacing page 63
PC Board Hole Layout page 41

Technical Documents page 64 Part Numbers


No. of Dimension Post Length
Product Specification 108-1093 Pos. A
Application Specification .100 [2.54] .145 [3.68]
114-25031 10 .294 [7.47] 5-104078-3
20 .544 [13.82] 5-104078-1
24 .644 [16.36] 5-104078-9
30 .794 [20.17] 5-104078-4
34 .894 [22.71] 6-104078-0
40 1.044 [26.52] 5-104078-2
50 1.294 [32.87] 5-104078-5 5-104744-7
60 1.544 [39.22] 5-104078-6
68 1.744 [44.30] 6-104078-3
80 2.044 [51.92] 5-104078-7 5-104744-4
100 2.544 [64.62] 5-104078-8 5-104744-5

Note: All part numbers are RoHS compliant.


40
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Recommended PC Board Hole Layouts, Thru-Hole Board-to-Board Connectors

Single Row, Right-Angle


with Solder Clips .022 Dia.
[0.56] Typ.
Plated-Thru Hole
Note: Consult TE for customer
.037 Dia.
drawings detailing tolerances. [0.94] Typ.
(Soldered
mechanical
solder clip) .335**
Plated-Thru [8.51]
Hole

PC Board Hole Layouts


* This dimension is for Shrouded,
PC Board Edge
Single Row Right-Angle Headers
only.

** This dimension is for Single Row No. of Dimensions


Right-Angle Receptacles only. Pos. B C D E
4 .150 [3.81] .075 [1.91]
5 .200 [5.08] .100 [2.54]
6 .250 [6.35] .125 [3.18]
8 .350 [8.89] .175 [4.45]
10 .450 [11.43] .350 [8.89] .050 [1.27]
12
15
20
.550 [13.97]
.700 [17.78]
.950 [24.13]
.450 [11.43]
.600 [15.24]
.850 [21.59]
.050 [1.27]
.050 [1.27]
.050 [1.27]



3
22 1.050 [26.67] .950 [24.13] .050 [1.27]
25 1.200 [30.48] 1.100 [27.94] .050 [1.27]
28 1.350 [34.29] 1.250 [31.75] .050 [1.27] .625 [15.88]
30 1.450 [36.83] 1.350 [34.29] .050 [1.27] .675 [17.15]
36 1.750 [44.45] 1.650 [41.91] .050 [1.27] .825 [20.96]
40 1.950 [49.53] 1.850 [46.99] .050 [1.27] .925 [23.50]
45 2.200 [55.88] 2.100 [53.34] .050 [1.27] 1.050 [26.67]
50 2.450 [62.23] 2.350 [59.69] .050 [1.27] 1.175 [29.85]

Double Row, Right-Angle


with Solder Clips .022 Dia.
[0.56] Typ.
Plated-Thru Hole
Note: Consult TE for customer
drawings detailing tolerances.
.037 Dia.
[0.94] Typ.
(Soldered mechanical
solder clip)
Plated-Thru Hole

* This dimension is for Shrouded,


PC Board Edge
Double Row Right-Angle Headers
only.
** This dimension is for Double Row
Right-Angle Receptacles only. No. of Dimensions
Pos. B C D E
10 .200 [5.08] .100 [2.54]
20 .450 [11.43] .350 [8.89] .050 [1.27]
24 .550 [13.97] .450 [11.43] .050 [1.27]
26 .600 [15.24] .500 [12.70] .050 [1.27]
30 .700 [17.78] .600 [15.24] .050 [1.27]
34 .800 [20.32] .700 [17.78] .050 [1.27]
40 .950 [24.13] .850 [21.59] .050 [1.27]
50 1.200 [30.48] 1.100 [27.94] .050 [1.27]
60 1.450 [36.83] 1.350 [34.29] .050 [1.27] .675 [17.15]
68 1.650 [41.91] 1.550 [39.37] .050 [1.27] .775 [19.69]
72 1.750 [44.45] 1.650 [41.91] .050 [1.27] .825 [20.96]
80 1.950 [49.53] 1.850 [46.99] .050 [1.27] .925 [23.50]
100 2.450 [62.23] 2.350 [59.69] .050 [1.27] 1.175 [29.85]

41
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Recommended PC Board Hole Layouts, Thru-Hole


Board-to-Board Connectors (Continued)

Single Row .022 Dia.


Without Solder Clips [0.56] TYP.
Plated-Thru Hole

Note: Consult TE for customer


drawings detailing tolerances.
PC Board Hole Layouts

No. of Dimension No. of Dimension


Pos. B Pos. B
4 .150 [3.81] 17 .800 [20.32]
5 .200 [5.08] 20 .950 [24.13]
6 .250 [6.35] 22 1.050 [26.67]
8 .350 [8.89] 25 1.200 [30.48]

3 10
12
13
15
.450 [11.43]
.550 [13.97]
.600 [15.24]
.700 [17.78]
30
31
36
40
1.450 [36.83]
1.500 [38.10]
1.750 [44.45]
1.950 [49.53]
50 2.450 [62.23]

Double Row
Without Solder Clips
.022 Dia.
[0.56] TYP.
Note: Consult TE for customer Plated-Thru
drawings detailing tolerances. Hole

No. of Dimension No. of Dimension


Pos. B Pos. B
8 .150 [3.81] 36 .850 [21.59]
10 .200 [5.08] 40 .950 [24.13]
12 .250 [6.35] 44 1.050 [26.67]
14 .300 [7.62] 50 1.200 [30.48]
16 .350 [8.89] 60 1.450 [36.83]
20 .450 [11.43] 68 1.650 [41.91]
24 .550 [13.97] 72 1.750 [44.45]
26 .600 [15.24] 80 1.950 [49.53]
30 .700 [17.78] 100 2.450 [62.23]
34 .800 [20.32]

42
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Surface-Mount Connectors, .050 x .100 [1.27 x 2.54] Centerline,


Board-to-Board

Product Facts
Surface-mount option for
parallel board-to-board
applications; completely
intermateable with
AMPMODU System 50
thru-hole board-to-board

Board-to-Board Connectors,
and cable-to-board systems
Double row, vertical,

Surface-Mount
shrouded header and
receptacle assemblies
Available in select sizes
from 10 through 100
positions
High Density; contacts
spaced on .050 x .100 [1.27
x 2.54] centers; compact
footprint
Compatible with standard
surface-mount processes
3
Stand-offs for free drainage
of flux cleaning solutions;
visible solder joints for easy
inspection
Simple, low insertion-force
holddown for process The high-density surface- The surface-mount system
retention and long-term mount connector is another includes double row,
strain relief for solder joints mounting option in the vertical, shrouded header
Available in tape and reel AMPMODU System 50 and receptacle assemblies
packaging (with vacuum connector family. in select sizes from 10
covers) for automatic This surface-mount system through 100 positions. It
placement. is fully intermateable with meets the tight dimensional
the AMPMODU System 50 requirements of surface-
thru-hole and cable-to- mount technology. The
board connectors. simple, low insertion-force
holddown provides both
Additionally, the design of processing retention and
the mating interface has not long-term strain relief for
been changed, maintaining the solder joints in the
the same high reliability as headers and receptacles.
the thru-hole product.

43
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Surface-Mount Headers, .050 x .100 [1.27 x 2.54] Centerline,


Board-to-Board

Double Row, Vertical .045


[1.14]
Ref.
.125
[3.18]

.284 .100
.344 [8.74] [7.21] [2.54]

.050 .031.010
[1.27] Typ. [.79.25]
Headers

A.003 .057.010
[.08] [1.45.25]
Material and Finish
Housing Glass-filled thermoplastic,
black, 94V-0 rated
Contacts Copper alloy; duplex .435.007
plated .000030 [0.00076] gold in [11.05.18]

3
mating area, .000150 [0.00381] tin
on solder tail, with entire contact under- .042.003
plated .000050 [0.00127] nickel [1.07 0.08] Dia. Typ.
(Plated-Thru Hole)
Holddown Copper alloy, plated .053.006 Detail A
.000150 [0.00381] tin over .000050 [1.350.15]
[0.00127] nickel

Related Product Data


Performance Characteristics
page 63
Mateable Connectors pages 40,
45, 51, 52, & 56
Board-to-Board Spacing page 63

Technical Documents page 64


Product Specification 108-1093
Holes for holddowns are not
Application Specification required for parts packaged
114-25035 in tape and reel.

Recommended PC Board Layout

Part Numbers
No. of Dimensions
Pos. A B C D E Pkg in Pkg in
Tube Tape & Reel*
10 .380 [9.65] .200 [5.08] .025 [0.64] 5-104549-1 5-147377-1
12 .430 [10.92] .250 [6.35] 6-104549-1
20 .630 [16.00] .450 [11.43] .150 [3.81] .150 [3.81] 5-104549-2 5-147377-2
24 .730 [18.54] .550 [13.97] .200 [5.08] .200 [5.08] 5-104549-3 5-147377-9
30 .880 [22.35] .700 [17.78] .275 [6.99] .275 [6.99] 5-104549-5 5-147377-3
40 1.130 [28.70] .950 [24.13] .400 [10.16] .400 [10.16] 5-104549-6 5-147377-4
50 1.380 [35.05] 1.200 [30.48] .525 [13.34] .525 [13.34] .025 [0.64] 5-104549-7 5-147377-5
60 1.630 [41.40] 1.450 [36.83] .650 [16.51] .650 [16.51] .000 5-104549-8 5-147377-6
80 2.130 [54.10] 1.950 [49.53] .900 [22.86] .900 [22.86] .000 5-104549-9 5-147377-7
100 2.630 [66.80] 2.450 [62.23] 1.150 [29.21] 1.150 [29.21] .000 6-104549-0 5-147377-8
*Parts packaged in tape and reel are without hold downs and include a vacuum pick and place cover

Note: All part numbers are RoHS compliant.


44
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Surface-Mount Receptacles, .050 x .100 [1.27 x 2.54] Centerline,


Board-to-Board

Double Row, Vertical


.025 Ref.
[0.64]

.198.002 [5.03.05]

.100
.125.008
[2.54]
[3.180.20]
2 Plc.

Surface Mount
Receptacles,
A

Material and Finish


Housing Glass-filled thermpolastic,
black, 94V-0 rated
Contacts Phosphor bronze; duplex .370.003
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder tail, with entire contact
underplated .000050 [0.00127] nickel
[9.400.08]

.053.006
[1.350.15]
3
Holddown Copper alloy; duplex
plated .000150 [0.00381] tin over .050
.000050 [0.00127] nickel [1.27]

.065.001
Dia. Typ. (Pad)
[1.650.03]
Related Product Data
Performance Characteristics Holes for holddowns are not
page 63 required for parts packaged
in tape and reel.
Mateable Connectors pages 29,
.285 Ref.
30, 34, 35 & 44 [7.24]
Board-to-Board Spacing page 63

.042.003 Dia.Typ.
Technical Documents page 64 [1.070.08] (Plated-Thru hole)
Product Specification 108-1093
Application Specification
114-25035

Recommended PC Board Layout

No. of Dimensions Part Numbers


Pos. A B C Pkg in Tube Pkg in Tape & Reel*
10 .294 [7.47] .200 [5.08] .400 [10.16] 5-104550-1 5-147378-1
20 .544 [13.82] .450 [11.43] .650 [16.51] 5-104550-2 5-147378-2
24 .644 [16.36] .550 [13.97] .750 [19.05] 5-104550-3 5-147378-9
30 .794 [20.17] .700 [17.78] .900 [22.86] 5-104550-4 5-147378-3
40 1.044 [26.52] .950 [24.13] 1.150 [29.21] 5-104550-5 5-147378-4
50 1.294 [32.87] 1.200 [30.48] 1.400 [35.56] 5-104550-6 5-147378-5
60 1.544 [39.22] 1.450 [36.83] 1.650 [41.91] 5-104550-7 5-147378-6
80 2.044 [51.92] 1.950 [49.53] 2.150 [54.61] 5-104550-8 5-147378-7
100 2.544 [64.62] 2.450 [62.23] 2.650 [67.31] 5-104550-9 5-147378-8
*Parts packaged in tape and reel are without hold downs and include a vacuum pick and place cover

Note: All part numbers are RoHS compliant.


45
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Cable-to-Board Connectors, .050 x .100 [1.27 x 2.54] Centerline


FFC Cable

Product Facts
Signal application only,
1.5 amperes maximum
single circuit
Single or double row
connectors
Cable-to-Board Connectors,

Terminates flexible flat


conductor cable and flexible
etched circuitry
FFC Cable

Shielded cable provides for


customizing
Center latch housing
providing positive latching

The cable-to-board .050 Flexible flat conductor cable solder tab. Receptacle
[1.27] center FFC is a planar parallel contacts are made of
receptacle connectors are conductor cable. It can be phosphor bronze with a
part of the AMPMODU used as a one-to-one finish of plated gold duplex,
System 50 family for connector or as a complex while the solder tab
terminating flexible flat harness, allowing split-outs contacts are finished in a
conductor cable and and special routing. The bright tin-lead overall.
flexible etched circuitry. cable is comprised of .026 The complete product line
The FFC receptacle uses a [0.66] wide x .003 [0.08] provides solder tabs for
dual beam contact with 30 thick conductors made of board mounting at low cost
microinches of gold plating. copper per QQ-C-502 and and custom shielding of the
The FFC receptacle insulated with a flame cable.
connectors have an integral retardant polyester film.
latch for positive locking to The FFC contacts are
shrouded mating headers. available in receptacle and

46
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Cable-to-Board Connectors, .050 x .100 [1.27 x 2.54] Centerline


FFC Cable] (Continued)

Custom Designed
Cable Assemblies
Solder Tabs Single Row
TE can supply customized Receptacle
Housing
flexible flat conductor cable
assemblies using the com-
ponents shown on pages Double Row
48 thru 54. Typical exam- Receptacle
ples of these cable assem- Housing

Conductor Cable
blies are shown to the right.

Flexible Flat
And, to meet the internal
shielding requirements of
todays complex electronic
equipment, custom
designed shielded FFC
cable assemblies can be
made to your specific
specifications.

FFC Cable,
3
.050 [1.27]
Centerline

Solder Tabs

Single Row
Receptacle
Housing

FFC Cable,
.050 [1.27]
Centerline

47
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

FFC Contacts, .050 x .100 [1.27 x 2.54] Centerline


Receptacle Solder Tab

.725
[18.42]
C*
Receptacle Strip C*

B
Contacts
FCC

.0085
[0.22] .016
Accepts .015 [0.38] Sq. Post [0.41]
.125-.350 [3.18-8.89] Long

3 Solder Tab Strip

Material and Finish .100 Typ.


[2.54]
Phosphor bronze; plated gold
duplex or bright tin-lead overall
(See chart.)

Related Product Data Localized Plate Area 4


Performance Characteristics .211 Max.
page 63 [5.36]

Housings pages 49-52


Application Tooling page 60-62

.0085.0005 Typ.
[0.2160.013]
Technical Documents page 64
Product Specification 108-16022
Application Specification Contacts Application Tooling
114-16008 Part Numbers
Part No./ Dimensions
Type Config. Machine With
Finish B C* D Machine Programmer
.520 .725
Receptacle Strip 1-487547-1 1 [13.21] [18.42]
Strip 487923-42 .245 .480 .685
[6.22] [12.19] [17.40]
.245 .480 .685 224910-4 318619-4
Solder Tab Strip 487923-53 [6.22] [12.19] [17.40] (120 V) (120 V)
Strip 487940-42 .110 .345 .550 224910-6 318619-6
[2.79] [8.76] [13.97] (240 V) (240 V)
.385
Contact Splice Strip 487941-44 [9.78]
.520 .725
Receptacle Strip 1-487547-25 [13.21] [18.42]
1Duplex plated .000030 [0.00076] gold on mating area, .000100 [0.00254] min. bright tin in crimp area, with entire con-
tact underplated .000050 [0.00127] min. nickel.
2Plated .000100 [0.00254] min. tin over .000050 [0.00127] min. nickel.
3Duplex plated .000015 [0.00038] gold on solder tab end, .000100 [0.00254] min. bright tin in crimp area, with entire

contact underplated .000050 [0.00127] min. nickel.


4Plated .000150 [3.81m] min. bright tin over .000050 [1.27m] min. nickel.
5Duplex Plated .000150 [0.00038] gold on mating area, .000100 [0.00254] min bright tin in crimp area, with entire con-

tact underplated .000050 [0.00127] min. nickel.


*After cut-off from carrier strip.

Note: All part numbers are RoHS compliant.


48
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Single Row Receptacle Housings, .050 x .100 [1.27 x 2.54] Centerline,


Cable-to-Board
Plain Style Housings

.585
[14.86]

Plain Style Housings

Receptacle
Housings
B

.047
[1.19]
(2 Pls.)

3
Latch Style Housings

Typ
.050 .098
Material and Finish [1.27] Typ. [2.49]

Housing Black thermoplastic, flame


retardant, 94V-0 rated A

Related Product Data


Performance Characteristics
page 63 Latch Style Housings
Receptacle Contacts page 48
Mateable Headers pages 27, 28,
32 & 33

Technical Documents page 64


Product Specification 108-16022 .585
[14.86]
Application Specification
114-16008

.294
[7.47]
.047
[1.19] .275
(2 Pls.) [6.98]

Typ
.050 .098
[1.27] Typ. [2.49]
A

49
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Single Row Receptacle Housings, .050 x .100 [1.27 x 2.54] Centerline,


Cable-to-Board (Continued)

No. of Dimensions Part Numbers


Pos. A B Plain Receptacle Housing Latch Style Receptacle Housing
4 .150 [3.18] .244 [6.20] 487544-1 487545-1
5 .200 [5.08] .294 [7.47] 487544-2 487545-2
6 .250 [6.35] .344 [8.74] 487544-3 487545-3
7 .300 [7.62] .394 [10.01] 487544-4 487545-4
8 .350 [8.89] .444 [11.28] 487544-5 487545-5
10 .450 [11.43] .544 [13.82] 487544-7 487545-7
12 .550 [13.97] .644 [16.36] 487544-9 487545-9
13 .600 [15.24] .694 [17.63] 1-487545-0
Receptacle
Housings

15 .700 [17.78] .794 [20.17] 1-487544-2 1-487545-2


16 .750 [19.05] .844 [21.44] 1-487544-3
17 .800 [20.32] .894 [22.71] 1-487544-4 1-487545-4
20 .950 [24.13] 1.044 [26.52] 1-487544-7 1-487545-7
22 1.050 [26.67] 1.144 [29.06] 1-487544-9 1-487545-9
25 1.200 [30.48] 1.294 [32.87] 2-487544-2 2-487545-2
26 1.250 [31.75] 1.343 [34.11] 2-487545-3
28 1.350 [34.29] 1.443 [36.65] 2-487545-5
30 1.450 [36.83] 1.544 [39.22] 2-487545-7

3 36
40
45
50
1.750 [44.45] 1.844 [46.84]
1.950 [49.53] 2.044 [51.92]
2.200 [55.88] 2.294 [58.27]
2.450 [62.23] 2.544 [64.62]
3-487544-3


4-487544-7
3-487545-3
3-487545-7
4-487545-2
4-487545-7
Note: Other sizes of receptacle housings (plain and latch style) can be made available, consult TE.

Plain Housing,
Latch Style Housing
Stacked End-to-End
(See Notes
1 & 2 below.)

Plain Housings,
Stacked Side-to-Side
(See Note 1 below.)

Post Removed AMPMODU System 50 Header, Shrouded


(Right-Angle Post shown
for ref. only.)

AMPMODU System 50 Header, Unshrouded


(Straight Post shown for ref. only.)

Notes: 1. Plain housings are side-to-side stackable on either straight or


right-angle posted, unshrouded AMPMODU System 50 headers.
Notes: 2. For end-to-end stacking, the posts located between the adjoining
housings must be removed to provide housing end clearance.

Typical Cable-to-Board Application Typical Cable-to-Board Application


of Plain Receptacle Housing of Latch Style Receptacle Housing

Note: All part numbers are RoHS compliant.


50
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Double Row Receptacle Housings, .050 x .100 [1.27 x 2.54] Centerline,


Cable-to-Board
Plain Style Housings

.585
[14.86]

Plain Style Housings

Receptacle
Housings
B Plain

.047
[1.19]
(2 Plc.)

.100
[2.54] .050
Typ
.198
[5.03]
3
Latch Style Housings [1.27] Typ.
A

Material
Black thermoplastic, flame retardant,
94V-0 rated

Related Product Data


Performance Characteristics
page 63
Receptacle Contacts page 48
Mateable Headers pages 29, 30, Latch Style Housings
34, 35, & 44

Technical Documents page 64


Product Specification 108-16022
Application Specification
114-16008

.047 .585
[1.19] [14.86]
(2 Plc.) .375
[9.53]
.198
[5.03]

.100
[2.54] Typ
.050 Latch
[1.27] Typ.
A

51
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Double Row Receptacle Housings, .050 x .100 [1.27 x 2.54] Centerline,


Cable-to-Board (Continued)

No. of Dimensions Plain Housing Latch Style Housing


Pos. A B Part Numbers Part Numbers
8 .150 [3.81] .247 [6.27] 487938-8 487937-8
10 .200 [5.08] .297 [7.54] 1-487938-0 1-487937-0
12 .250 [6.35] .374 [8.81] 1-487938-2 1-487937-2
14 .300 [7.62] .397 [10.08] 1-487938-4 1-487937-4
16 .350 [.889] .447 [11.35] 1-487938-6 1-487937-6
20 .450 [11.43] .547 [13.89] 2-487938-0 2-487937-0
24 .550 [13.97] .647 [16.43] 2-487938-4 2-487937-4
26 .600 [15.24] .697 [17.7] 2-487938-6 2-487937-6
30 .700 [17.78] .797 [20.24] 3-487938-0 3-487937-0
Receptacle
Housings

34 .800 [20.32] .897 [22.78] 3-487938-4 3-487937-4


40 .950 [24.13] 1.047 [26.59] 4-487938-0 4-487937-0
44 1.050 [26.67] 1.147 [29.13] 4-487938-4 4-487937-4
50 1.200 [30.48] 1.297 [39.94] 5-487938-0 5-487937-0
60 1.450 [36.83] 1.547 [39.29] 6-487937-0
72 1.750 [44.45] 1.847 [46.91] 7-487938-2 7-487937-2
80 1.950 [49.53] 2.047 [51.99] 8-487938-0 8-487937-0
100 2.450 [62.23] 2.547 [64.69] 487938-1 487937-1

3 Note: Other sizes of receptacle housings, up to 120 positions, can be made available, consult TE.

Plain Housing,
Stacked End-to-End
(See Notes 1 & 2 below.)

Latch Style Housing (Shown)

Post Removed

AMPMODU System 50 Header, Unshrouded


(Straight Post shown for ref. only.)

AMPMODU System 50 Header,


Shrouded (Right-Angle Post
Notes: 1. Plain housings are end-to-end stackable on either straight or shown for ref. only.)
right-angle posted, unshrouded AMPMODU System 50 headers.
Notes: 2. For end-to-end stacking, the two posts located between the adjoining
housings must be removed to provide housing end clearance.

Typical Cable-to-Board Application Typical Cable-to-Board Application


of Plain Receptacle Housing of Latch Style Receptacle Housing

Note: All part numbers are RoHS compliant.


52
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

ZIF-Line Connectors, .050 x .100 [1.27 x 2.54] Centerline, Cable-to-Board

Vertical Cable Entry Pos. 1


.040
[1.02]
Identification

.020
[0.508]
.240 .240
[6.10] [6.10]

.050
A .155 [1.27]
[3.94] .100
[2.54]

Connectors
ZIF-Line
Dia. Typ
.031.003 Dia. Typ.
[0.790.08]
Material and Finish **
.310
Housing and Cover Black [7.87]
thermoplastic, flame retardant,
94V-0 rated
Contacts Phosphor bronze, plated Dia. Typ .100.002
.050.002* Dia. Typ.
.000150 [0.00381] min. bright tin over [2.540.05]

3
[1.270.05]
Typ
.000050 [0.00127] min. nickel on entire .100 Pos. 1
contact [2.54] Typ.
Typ
.010 .050 Recommended Mounting Hole Pattern
[0.25] [1.27] Typ.
.105 **.002 [0.05] tolerance not to accumulate
Performance Characteristic B [2.67] within one mounting hole pattern.
Contact Current Rating **This mounting hole required for even-numbered
1 ampere Note: ZIF-Line connector illustrated above with connector sizes only.
cover in closed position.
1 ampere rating is for single circuit.
Multiple circuits, ambient temperature
and conductor size affect current
carrying capacity.

Related Product Data


FFC Cable (with Tin-Plated
Prepared Ends) Typ
.210
Consult TE. [5.33] Min.

Technical Documents page 64 FFC Cable or


Flexible Etched Circuitry
Product Specification 108-16025 with Prepared Ends*
Application Specification .004-.012
114-16014 [0.102-0.305]
Thk.

ZIF-Line Connector
(Termination
Completed with
ZIF-Line Connector Cable Inserted and
(Cover Open) Cover Closed)

*FFC cable with tin-plated prepared ends can be made available, consult TE.
Note: Special preparation of cable is required, refer to TE Application Specification No. 114-16014.

Typical Flexible Flat Conductor Cable-to-Board Application

53
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

ZIF-Line Connectors, .050 x .100 [1.27 x 2.54] Centerline,


Cable-to-Board (Continued)

Dimensions Connector Dimensions Connector


No. of No. of
Part Part
Pos. A B Pos. A B
Numbers Numbers
5 .470 [11.94] .410 [10.41] 5-487576-0 31 1.770 [44.96] 1.710 [43.43] 2-487576-3
6 .520 [13.21] .460 [11.68] 5-487576-1 32 1.820 [46.23] 1.760 [44.70] 2-487576-4
7 .570 [14.48] .510 [12.95] 4-487576-8 33 1.870 [47.50] 1.810 [45.97] 2-487576-5
8 .620 [15.75] .560 [14.22] 4-487576-9 34 1.920 [48.77] 1.860 [47.24] 2-487576-6
9 .670 [17.02] .610 [15.49] 487576-1 35 1.970 [50.04] 1.910 [48.51] 2-487576-7
10 .720 [18.29] .660 [16.76] 487576-2 36 2.020 [51.31] 1.960 [49.78] 2-487576-8
11 .770 [19.56] .710 [18.03] 487576-3 37 2.070 [52.58] 2.010 [51.05] 2-487576-9
Connectors

12 .820 [20.83] .760 [19.30] 487576-4 38 2.120 [53.85] 2.060 [52.32] 3-487576-0
ZIF-Line

13 .870 [22.10] .810 [20.57] 487576-5 39 2.170 [55.12] 2.110 [53.59] 3-487576-1
14 .920 [23.37] .860 [21.84] 487576-6 40 2.220 [56.39] 2.160 [54.86] 3-487576-2
15 .970 [24.64] .910 [23.11] 487576-7 41 2.270 [57.66] 2.210 [56.13] 3-487576-3
16 1.020 [25.91] .960 [24.38] 487576-8 42 2.320 [58.93] 2.260 [57.40] 3-487576-4
17 1.070 [27.18] 1.010 [25.65] 487576-9 43 2.370 [60.20] 2.310 [58.67] 3-487576-5
18 1.120 [28.45] 1.060 [26.92] 1-487576-0 44 2.420 [61.47] 2.360 [59.94] 3-487576-6
19 1.170 [29.72] 1.110 [28.19] 1-487576-1 45 2.470 [62.74] 2.410 [61.21] 3-487576-7

3
20 1.220 [30.99] 1.160 [29.46] 1-487576-2 46 2.520 [64.01] 2.460 [62.48] 3-487576-8
21 1.270 [32.26] 1.210 [30.73] 1-487576-3 47 2.570 [65.28] 2.510 [63.75] 3-487576-9
22 1.320 [33.53] 1.260 [32.00] 1-487576-4 48 2.620 [66.55] 2.560 [65.02] 4-487576-0
23 1.370 [34.80] 1.310 [33.27] 1-487576-5 49 2.670 [67.82] 2.610 [66.29] 4-487576-1
24 1.420 [36.07] 1.360 [34.54] 1-487576-6 50 2.720 [69.09] 2.660 [67.56] 4-487576-2
25 1.470 [37.34] 1.410 [35.81] 1-487576-7 51 2.770 [70.36] 2.710 [68.83] 4-487576-3
26 1.520 [38.61] 1.460 [37.08] 1-487576-8 52 2.820 [71.63] 2.760 [70.10] 4-487576-4
27 1.570 [39.88] 1.510 [38.35] 1-487576-9 53 2.870 [72.90] 2.810 [71.37] 4-487576-5
28 1.620 [41.15] 1.560 [39.62] 2-487576-0 54 2.920 [74.17] 2.860 [72.64] 4-487576-6
29 1.670 [42.42] 1.610 [40.89] 2-487576-1 55 2.970 [75.44] 2.910 [73.91] 4-487576-7
30 1.720 [43.69] 1.660 [42.16] 2-487576-2

Note: All part numbers are RoHS compliant.


54
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Cable-to-Board Connectors, .050 x .100 [1.27 x 2.54] Centerline,


Ribbon Cable, System 50
Product Facts
Preassembled housing
and cover
One step termination
End and daisy chain
termination

Cable-to-Board Connectors,
Positive end latching of
connector to shrouded

Ribbon Cable
headers
Terminates 30 AWG
[0.05 mm2] solid or
stranded and
32 AWG [0.03 mm2]*
stranded .025 [0.64]
centerline ribbon cable
with PVC insulation
0.5 ampere current
rating (limited by cable) 3

The AMP-LATCH System 50 stranded conductors, with contacts are plated with
Ribbon Cable connector PVC cable insulation. 30 gold duplex plating. The
is a receptacle connector The housing and cover latching feature is located
that will terminate ribbon (black) have a 94V-0 rating. on the receptacle, not the
cable on .025 [0.64] A copper alloy single header, and saves board
centerlines. It is available mating beam contact space and eliminates future
in select sizes from 10 to provides the interconnect problems of latch height
100 positions and will between the conductor compatibility.
accommodate 30 AWG and the .015 [0.38] square
[0.05 mm2] solid or stranded posts on the .050 x .100
and 32 AWG [0.03 mm2] [1.27 x 2.54] grid. The

55
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Double Row Receptacles, .050 x .100 [1.27 x 2.54] Centerline,


Cable-to-Board, Ribbon Cable, System 50

.254 .228
[6.45] [5.79]

A
.054 B Cover
Ribbon Cable
Receptacles

[1.37] C
Latch

.580
[14.73]
Before
Termination
Material and Finish .430
[10.92]
Housing Black thermoplastic,
94V-0 rated

3
.335 Contact
[8.51]
Latches Stainless steel .100
Contacts Copper alloy, plated gold .198 [2.54]
[5.03]
over nickel with tin in termination area Housing .228
.102 [5.80]
Position #1 [2.59] .246
Indicator E [6.25]
Related Product Data F
Performance Characteristics
page 63
Mateable Headers pages 29, 30,
34, 35 & 44
Application Tooling page 60-62
Mates with Posts
.015 [0.38] square, .125 [3.18] long,
on.050 x .100 [1.27 x 2.54] grid
.100
[2.54] .050
Typ.
[1.27]
Technical Documents page 64
Product Specification 108-1109 D
Application Specification
114-25029

No. of Dimensions Part


Pos. A B C D E F Numbers
10 .510 [12.95] .445 [11.30] .225 [5.72] .200 [5.08] .096 [2.44] .294 [7.47] 2-111196-5
14 .610 [15.49] .545 [13.84] .325 [8.26] .300 [7.62] .146 [3.71] .394 [10.01] 2-111196-6
16 .660 [16.76] .595 [15.11] .375 [9.52] .350 [8.89] .171 [4.34] .444 [11.28] 2-111196-7
20 .760 [19.30] .695 [17.65] .475 [12.07] .450 [11.43] .221 [5.61] .544 [13.82] 1-111196-8
24 .860 [20.32] .795 [20.19] .575 [14.61] .550 [13.97] .271 [6.88] .644 [16.36] 2-111196-8
26 .910 [23.11] .845 [21.46] .625 [15.88] .600 [15.24] .296 [7.52] .694 [17.63] 2-111196-9
30 1.010 [25.65] .945 [24.00] .725 [18.42] .700 [17.78] .346 [8.79] .794 [20.17] 1-111196-9
34 1.110 [28.19] 1.045 [26.54] .825 [20.96] .800 [20.32] .396 [10.06] .894 [22.71] 3-111196-0
40 1.260 [32.00] 1.195 [30.35] .975 [34.54] .950 [24.13] .471 [11.96] 1.044 [26.52] 2-111196-0
44 1.360 [34.54] 1.295 [32.89] 1.075 [27.31] 1.050 [26.67] .521 [13.23] 1.144 [29.06] 3-111196-1
50 1.510 [38.35] 1.445 [36.70] 1.225 [31.12] 1.200 [30.48] .596 [15.14] 1.294 [32.87] 2-111196-1
60 1.760 [44.70] 1.695 [43.05] 1.475 [37.47] 1.450 [36.83] .721 [18.31] 1.544 [39.22] 2-111196-2
64 1.860 [47.24] 1.795 [45.59] 1.575 [40.00] 1.550 [39.37] .771 [19.58] 1.644 [41.76] 3-111196-2
68 1.960 [49.78] 1.895 [48.13] 1.675 [42.55] 1.650 [41.91] .821 [20.85] 1.744 [44.30] 3-111196-4
72 2.060 [52.32] 1.995 [50.67] 1.775 [45.08] 1.750 [44.45] .871 [22.12] 1.844 [46.84] 2-111196-3
80 2.260 [57.40] 2.195 [55.75] 1.975 [50.17] 1.950 [49.53] .971 [24.66] 2.044 [51.92] 3-111196-3
100 2.760 [70.10] 2.695 [68.45] 2.475 [62.87] 2.450 [62.23] 1.221 [31.01] 2.544 [64.62] 2-111196-4

Note: All part numbers are RoHS compliant.


56
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Paddleboard Receptacles, .050 x .100 [1.27 x 2.54] Centerline,


Cable-to-Board, Ribbon Cable, System 50

.050 .340
[1.27] [8.64]
(Unterminated)
.168
[4.27]

.100
.020 [2.54]
.024 Typ. .050 Typ. [0.51] .008 .075 Typ.
[0.61] [1.27] [0.20] [1.91]
Typ.

Paddleboard
Receptacles
B .304
.045 [7.72]
[1.19]
Material and Finish Ref.
Housing Black LCP thermoplastic, A .040
94V-0 rated [1.02] .030
Standoffs
.118 [0.76]
Cover Black polyester, 94V-0 rated [3.00] (Various Locations)
Contacts Copper alloy, plated
.000100-.000200 [0.00245-0.00508] .273
bright tin over .000050-.000100 [6.93]
[0.00127-0.00254] nickel (Terminated)

3
Related Product Data
Performance Characteristics Position 1
Indicator
page 63
Application Tooling pages 60-62

B B
.050 .031 .050 .031
Technical Documents page 64 [1.27]
Typ.
[0.79]
Typ.
[1.27]
Typ. Typ.
[0.79]
Product Specification 108-1109
Application Specification
114-25040
.304 .304
[7.72] [7.72]

.075 .075
Typ. Typ.
[1.91] Recommended PC Board Layout 1 [1.91] Recommended PC Board Layout 2

No. of PCB Hole Dimensions No. of PCB Hole Dimensions


Part Numbers Part Numbers
Pos. Layout A B Pos. Layout A B
10 1 .436 [11.07] .200 [5.08] 5111595-1 44 2 1.286 [32.66] 1.050 [26.67] 1-5111595-0
14 1 .536 [13.61] .300 [7.62] 5111595-2 46 1 1.336 [33.93] 1.100 [27.94] 1-5111595-7
16 2 .586 [14.88] .350 [8.89] 5111595-3 50 1 1.436 [36.47] 1.200 [30.48] 1-5111595-1
20 2 .686 [17.42] .450 [11.43] 5111595-4 60 2 1.686 [42.82] 1.450 [36.83] 1-5111595-2
24 2 .786 [19.96] .550 [13.97] 5111595-5 64 2 1.786 [45.36] 1.550 [39.37] 1-5111595-3
26 1 .836 [21.23] .600 [15.24] 5111595-6 68 2 1.886 [47.90] 1.650 [41.91] 1-5111595-9
28 2 .886 [22.50] .650 [16.51] 2-5111595-0 72 2 1.986 [50.44] 1.750 [44.45] 1-5111595-4
30 1 .936 [23.77] .700 [17.78] 5111595-7 80 2 2.186 [55.52] 1.950 [49.53] 1-5111595-5
34 1 1.036 [26.31] .800 [20.32] 5111595-8 100 2 2.686 [68.22] 2.450 [62.23] 1-5111595-6
40 2 1.186 [30.12] .950 [24.13] 5111595-9

Note: All part numbers are RoHS compliant.


57
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Flat Ribbon Cable, PVC Insulation

30 AWG [0.05 mm2], B


Solid Bare Copper A
30 AWG [0.05 mm ] 2

Solid Bare Copper

Product Specifications
.025
Voltage 150 Volts Red Edge Mark [0.635]
Impedance 80 Ohms Nominal for orientation
(GND,SIG, GND, applies to 30AWG
Solid Bare Copper) .0125
.006 [0.152] Minimum
InsulationGray Flame
[0.318] .025 Retardant Flexible PVC
Capacitance 19.2 pf/ft at Insulation Thickness
FlammabilityUL: VW1
[0.635] Temperature Rating -
1 MHz nom. Typ. 20C to +105C
Propagation Delay 1.51 ns/ft nom.
Flat Ribbon

Crosstalk
Cable

10 ft sample 5 ns rise time:


Near End 4.0% max. Part Numbers
No. of Dimensions
Far End 6.0% max. Conductors Length Per Reel*
A B
UL Listing STYLE 2678 100 ft. [30.48 m] 500 ft. [152.4 m]
16 .375 [9.52] .400 [10.16] 5-57013-1 5-57013-2
20 .475 [12.07] .500 [12.70] 1-57013-3 57013-1
24 .575 [14.61] .600 [15.24] 1-57013-4 57013-8

3 Recognized under the


Component Program of
Underwriters
26
28
30
.625 [15.88]
.675 [17.14]
.725 [18.42]
.650 [16.51]
.700 [17.78]
.750 [19.05]
2-57013-5
4-57013-6
1-57013-5
2-57013-6
4-57013-7
57013-6
34 .825 [20.95] .850 [21.59] 4-57013-9 5-57013-0
Laboratories Inc., R 36 .875 [22.23] .900 [22.86] 1-57013-6 57013-7
File No. E53793 40 .975 [24.77] 1.000 [25.40] 1-57013-7 57013-2
44 1.075 [27.31] 1.100 [27.94] 1-57013-8 57013-9
Certified by Canadian 50 1.225 [27.94] 1.250 [31.75] 1-57013-9 1-57013-0
Standards Association, R
60 1.475 [37.47] 1.500 [38.10] 2-57013-0 57013-3
(CSA File No. LL83498) 68 1.675 [42.55] 1.700 [43.18] 2-57013-1 1-57013-1
72 1.775 [45.09] 1.800 [45.72] 2-57013-2 1-57013-2
80 1.975 [50.17] 2.000 [50.80] 2-57013-3 57013-4
100 2.475 [62.87] 2.500 [63.50] 2-57013-4 57013-5
*Reel may contain separate lengths, 20 ft. [6.1 m] min. per length.

Electrical Characteristics of .025 [0.64] Centerline IDC Ribbon Cable

Impedance Capacitance Nominal NEXT FEXT


Base Inductance
Insulation AWG Voltage Single Ended Nominal Prop. 10 Ft 10 Ft
Part No. Nominal
G-S-G G-S-G Delay 5ns Rise Time 5ns Rise Time
57013 PVC 30 Solid 150 Vac 80 Ohms Nom 19.2 pf/ft .160 mh/ft 1.51 ns/ft 4.0% Max 6.0% Max
219054, 219137 TPE 30 Solid 150 Vac 90+/- 6 Ohms 15.3 pf/ft .124 mh/ft 1.382 ns/ft 2.39% Nom 2.99% Nom
57119, 57139, 57145 FEP 30 Solid 300 Vac 93 Ohms Nom 13.6 pf/ft .120 mn/ft 1.34 ns/ft 2.6% Nom 2.8% Nom

57131 PVC 30 Stranded 150 VAC 66 Ohms Nom 23.0 pf/ft .100 mh/ft 1.55 ns/ft 2.8% Max 4.5% Max
219055 TPE 30 Stranded 150 VAC 78 Ohms Nom 19.4 pf/ft .118 mh/ft 1.510 ns/fr 1.37% Nom 2.37% Nom
57288, 57289, 57290 FEP 30 Stranded 300 Vac 85 Ohms Nom 15.4 pf/ft .110 mh/ft 1.36 ns/ft 2.5% Nom 2.8% Nom

219253 TPE 31 Stranded 150 Vac 90+/- 6 Ohms 15.4 pf/ft .125 mh/ft 1.527 ns/ft 1.97% Nom 2.51% Nom

57038 PVC 32 Stranded 150 Vac 80 Ohms Nom 19.2 pf/ft .147 mh/ft 1.51 ns/ft 4.0% Max 6.0% Max
219138 TPE 32 Stranded 150 Vac 104 Ohms Nom 12.8 pf/ft .138 mh/ft 1.664 ns/ft 2.10% Nom 2.57% Nom
57118, 57138, 57144 FEP 32 Stranded 300 Vac 105 Ohms Nom 13.0 pf/ft .120 mh/ft 1.36 ns/ft 2.6% Nom 2.8% Nom

Note: All part numbers are RoHS compliant.


58
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Centerline IDC Ribbon Cable, PVC Insulation

30 AWG 7/38 Stranded


Tinned Copper
B
For use with: Edge
A
AMP-LATCH System 50, 30 AWG 7/38 Mark
AMPLIMITE .050 Series and Stranded
Tinned Copper
AMPMODU System 50
Connectors .027 [0.686]

Compatible with:
AMP R-CAM Ribbon Cable
Assembly Machine
.0125 [0.318]
Product Specifications .006 [0.152] Minimum

Flat Ribbon
Insulation Thickness PVC Insulation

Cable
Voltage Rating 150 Volts .025 TYP
Impedance 66 ohms (GND, SIG, [0.635]
GND)
Capacitance 23 pf/ft. at
1 KHz
Propagation Delay Dimensions Part Numbers
No. of
1.55 ns/ft. [5.6 ns/m] Conductors Length Per Reel
A B
100 ft. [30.5 m] 500 ft. [152.4 m]

3
Crosstalk
20 .475 [12.07] .500 [12.70] 1-57131-3 57131-1
10 Ft. sample 5 ns rise time
Near End 2.8% max 40 .975 [24.77] 1.000 [25.40] 1-57131-7 57131-2
Near End 4.5% max 50 1.225 [31.12] 1.250 [31.75] 1-57131-9 1-57131-0
UL AWM Style 2678 68 1.675 [42.55] 1.700 [43.18] 2-57131-1 1-57131-1
80 1.975 [50.17] 2.000 [50.80] 2-57131-3 57131-4
R Certified 100 2.475 [62.87] 2.500 [63.50] 2-57131-4 57131-5
R

Note: All part numbers are RoHS compliant.


59
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Application Tooling for Flexible Film Contacts

Hand Crimping Flexible Film Termination Machine


Tool Assemblies (Terminates Continuous Strip Contacts Sequentially)
(for repair purposes)
Application Tooling

Part No. 90273-5for .100 CL

3
Multi-Crimp Contacts (408-9564)

Extraction Tools for .100 CL


Contacts
Tool No. 91200-* for Receptacle
Housings with Side Locking Lance
Slot (408-7916)
Tool No. 91047-* for Receptacle
and Pin Housings with End Locking
Lance Slot (408-7384)
The flexible film Machine Part Numbers
*Consult TE for specific dash nos.
semiautomatic bench Description
Machine Machine
machine for terminating With Programmer*
.050 [1.27] and .100 [2.54] .100 [2.54] CL, Multi-Crimp, 120 V 224910-1 318619-1
centerline flexible flat .100 [2.54] CL, Multi-Crimp, 240 V 224910-2 318619-2
.100 [2.54] CL, ARINC, 120 V 224910-3 318619-3
For tooling information, contact the conductor cable (FFC),
.050 [1.27] CL, Multi-Crimp, 120 V 224910-4 318619-4
Technical Support Center: flexible etched circuitry
1-800-522-6752. .050 [1.27] CL, Multi-Crimp, 240 V 224910-6 318619-6
(FEC), and flexible printed
*The Programmer Kit (Part No. 356484-1) may be purchased with a new
wiring (FPW) with AMP FFC machine, or separately for adding onto an existing machine.
reel-mounted contacts. For
each cable or circuitry, the
contacts are automatically
applied one-at-a-time in a Technical Documents Specifications
straight sequence. To skip
Customer Manuals Width 20.5 [520]
positions, an optional Depth 27.5 [700]
409-5835 (Part Numbers 224910 and
programmer control box is 318619) Height 18 [460] (with reel support)
available. Crimp height is 409-5880 Programmer Kit (Part Reel Size 24 [610] (max.)
easily adjustable in .0002 Number 356484-1) Weight 100 lb. [45.4 kg]
[.0051] increments. Electrical Source
Termination rates up to 120 VAC, 50/60 Hz, 7.0 A;
200 contacts per minute. 240 VAC, 50/60 Hz, 3.5 A

Note: All part numbers are RoHS compliant.


60
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Application Tooling for Compliant Pin Connectors

ASG Servo Electric Presses


for Compliant Pin
Connectors
TE offers the ASG line of
servo electric presses for
the application of compliant
pin products. Systems are
available in a wide range of
pressing forces, board size

Application Tooling
capabilities and automation
levels to meet almost any
applications requirements.
Each system utilizes a servo
electric motor with PC con-
trol. Coupled with force and
distance monitoring and
control, the entire line pro-
vides 100% quality assur-

3
ance in real-time with SPC
data collection capabilities.
Automatic set up and a
graphical operator interface
help provide intuitive opera-
Press Force Monitoring for Scrap Avoidance
tion to help reduce common Every TE ASG servo press and maximum force param-
and costly operator errors. utilizes real-time force and eters. Common operator
distance monitoring and error such as improperly
control. This allows the placed connectors, miss-
press to identify an error ing\incorrect connector or
and react throughout the tooling can also be found
press stroke. Common by monitoring premature or
problems such as PCB missing force parameters.
holes above\below specifi- In each case, the system
cation and sometimes bent can stop during the press
pins can be detected by cycle to avoid costly scrap
monitoring both minimum and rework.

Product Line Overview

BMEP MEP AEP 6T AEP 12T


System Type Benchtop Stand-Alone Stand-Alone Stand-Alone or
Semi-Automatic Press Semi-Automatic Press Automatic Press Inline Automatic Press
Force Capability Up to 5 Tons Up to 12 Tons Up to 6 Tons Up to 12 Tons
[44 kN] [107 kN] [53 kN] [107 kN]
Board Size Capability Up to 18" x 24" Up to 30" x 36" Up to 30" x 36" Up to 36" x 48"
[460x610 mm] [760x915 mm] [760x915 mm] [915x1220 mm]
Please contact the Tyco Tooling Assistance Center at 1-800-722-1111 for help with choosing the correct press and tooling to meet your application needs.
See Catalog 1309329 for more information on this equipment.

Note: All part numbers are RoHS compliant.


61
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Application Tooling for Ribbon Cable Connectors


These application tools are
designed for one-step
termination of ribbon cable
connectors to planar,
ground plane and
shielded/jacketed ribbon
cable on .025 [0.64]
centers. A complete set of
tooling consists of an Arbor
Tool (manual, Part No.
Application Tooling

91085-2 or pneumatic,
Part No. 91112-3), a Base
Assembly, Part No.
768338-4 and a Connector
Specific Kit, Part No.
679167-1 (receptacle).
Pneumatic Auto-Cycle Manual Arbor Tool
Tool Part No. 91112-3 Part No. 91085-2

3 Technical Documents
Instruction Sheets
408-7777 Manual Arbor Frame
Assembly
408-6732 Pneumatic Auto-Cycle
Assembly
408-9827 Universal Base Assembly,
Arbor Tool
408-9872 Connector Specific Kit
for Receptacle Connectors (.025 [0.64]
Centerline Cable)
408-9928 Connector Specific Kit
for Paddleboard Connectors (.025 [0.64]
Centerline Cable)

Note: Tooling is available for other


manufacturers manual arbor tools.
For information contact the
TE Technical Support Center:
1-800-522-6752

Note: All part numbers are RoHS compliant.


62
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Performance Specifications

Board-to-Board Spacing
for Thru-Hole and
Surface-Mount Connector Thru-Hole Receptacle Thru-Hole Receptacle
Combinations Thru-Hole Header Surface-Mount Header
(Single and Double Row, (Double Row, Shrouded)
Shrouded and Unshrouded)

Performance Characteristics
Surface-Mount Receptacle Surface-Mount Receptacle
Thru-Hole Header Surface-Mount Header
(Double Row, Shrouded and
Unshrouded)
(Double Row, Shrouded)
3

Need more information?


Call the Technical Support Center: 1-800-522-6752.
The Technical Support Center is staffed with specialists
well versed in all TE products. The Center can provide
you with:
Technical Support
Catalogs
Technical Documents

Product Samples

TE Authorized Distributor Locations

Performance Specifications
Board-to-Board, Board-to-Board, Cable-to-Board,
Thru-Hole Surface-Mount, Cable-to-Board, .025 [0.64] Centerline
Description
Headers and Headers and .050 [1.27] Centerline Ribbon Cable
Receptacles Receptacles FFC Cable Receptacles Receptacles
Size Range-Single Row 4 thru 50 4 thru 50
Double Row 10 thru 100 10 thru 100 8 thru 100 10 thru 100
Current Rating (per contact) 1.0 amperes 1.0 amperes 1.5 amperes 0.5 amperes
Dielectric Withstanding Voltage 500 VAC 500 VAC 300 VAC 200 VAC
Insulation Resistance 5,000 Megohms 5,000 Megohms 5,000 Megohms 5,000 Megohms
Durability (tested to) 200 Cycles 200 Cycles 200 Cycles 150 Cycles
Mating Force (per contact) 5 oz. [1.38 N] Max. 5 oz. [1.38 N] Max. 8 oz. [2.22 N] Max. 4 oz. [1.11 N] Max.
Unmating Force (per contact) 0.8 oz. [0.22 N] Min. 0.8 oz. [0.22 N] Min. 1.0 oz. [0.27 N] Min. *0.5 oz. [0.13 N] Min.
Operating Temperature -65C to +105C -65C to +105C -55C to +105C -65C to +105C
*With latches depressed.

63
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Technical Documents
The following is a list of technical documents covering the application, performance and
maintenance of AMPMODU System 50 connectors.

Product Specifications describe technical performance characteristics and verification tests.


They are intended for the Design, Component and Quality Engineer.
108-1093AMPMODU System 50 Interconnection System, Board-to-Board
108-1109AMPLATCH System 50 Receptacle and Paddleboard Connector
108-16022Connector System, .050 [1.27] Centerline FFC Cable
Technical Documents

108-16025Connector, ZIF-Line 50
108-16029Shielded Flexible Flat Conductor Cable
108-40002Flexible Flat Conductor Cable

Application Specifications describe requirements for using the product in its intended appli-
cation and/or crimping information. They are intended for the Packaging and Design
Engineer and the Machine Setup Person.

3 114-16008Multiple Crimp Contact for .050 [1.27] Centerline FFC and FEC Cable
114-16014AMP ZIF-Line 50 & 100 PCB Connectors
114-25029AMPMODU System 50 Ribbon Cable Connectors
114-25031AMPMODU System 50 Thru-Hole Connectors
114-25035AMPMODU Surface-Mount Connectors
114-25040AMPMODU System 50 Paddleboard Connectors

Instruction Sheets provide instructions for assembling or applying the product. They are
intended for the Manufacturing Assembler or Operator.
408-6732Pneumatic Arbor Tool, Part Number 91112-3 (Auto-Cycle)
408-7384Extraction Tool, Part Number 91047
408-7763Pneumatic Arbor Tool, Part Number 91112-2
408-7777Manual Arbor Tool, Part Number 91085-2
408-7916Extraction Tool, Part Number 91200
408-9827Universal Base Assembly, Arbor Tool, Part Number 768338-1
408-9872Connector Specific Kit, Part Number 679167-1, AMPMODU System 50
Receptacle Connectors (.025 [0.64] Centerline Cable)
408-9928Connector Specific Kit, Part Number 679176-1, AMPMODU System 50
Paddleboard Connectors (.025 [0.64] Centerline Cable)
408-9564Hand Crimping Tool Assembly, Part Number 90273-5
408-9719FFC Contact Positioning Hand Tool Kit, Part Number 91292-1

Note: All part numbers are RoHS compliant.


64
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System

AMPMODU 2mm Connectors (Board to Board)

Product Facts
2.0 x 2.0 [.08 x .08]
centerline spacing
Two-piece, double-row
connector system
Unshrouded header styles
include; breakaway and
surface-mount
All headers with 0.5 [.02]
square posted contacts
Surface-mount connectors
compatible with standard
surface-mount processing
(VPR, IR)

AMPMODU 2mm Connectors


Closed top-entry
receptacle assemblies

(Board-to-Board)
include; vertical
mount and right-angle
Receptacle contacts
employ dual cantilever
beams for two-point
electrical stability
Duplex (gold/tin-lead)
plated posted contacts

and receptacle contacts


Thermoplastic housing
material, UL 94V-0 rated AMPMODU 2mm connectors
reliably and economically
Thru-hole breakaway
headers feature brass
4
Recognized under the meet the packaging and straight or right-angle
Component Program of inter-connection posts with a post length of
Underwriters requirements of todays 4.0 [.16] and a lead length
Laboratories Inc., R miniature sophisticated of 2.6 [.10].
File No. E28476 electronics. They are ideal The receptacle assemblies
Certified by Canadian for mobile and portable employ phosphor bronze
Standards personal computers and disk contacts with dual canti-
Association, R
drive applications. In todays lever beams and built-in
File No. LR7189 marketplace, 2mm is anti-overstress. This feature,
expanding over many other coupled with duplex
Produced under a Quality
industry segments due to (gold/tin-lead) plating of
Management System
space constraints. the header posts and
certified to ISO 9001
A copy of the This versatile double- receptacle contacts,
certificate is available ISO900e1d row connector system is provide superior electrical
i
upon request. rtif comprised of various performance as well as
Ce
straight and right-angle excellent solderability.
posted headers for
thru-hole and surface
mounting and several
closed top-entry
receptacle assemblies
for vertical and horizontal
mounting. Headers and
receptacle assemblies are
available in selected sizes
ranging from 4 through
80 positions.

65
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System

2mm Headers, Unshrouded, Double Row, Thru-Hole, Vertical Mount


B
2.000.15
0.5 [.02] Square 2.00 [.079.006] TYP
[.079] TYP
Straight Posts 4.000.15
[.157.006]

Material and Finish


0.80
Housing Black thermoplastic,
0.50 [.031] DIA TYP
UL 94V-O Rated A
[0.02] Recommended Solder Pad Layout
Posted Contacts Copper alloy, 0.10
B
[.004]
duplex plated as follows: 2.000.15 2.000.15
[.079.006] [.079.006]
0.00020 [.000008] min. gold on contact
area, 0.00254 [.000100] min. tin on
solder area, with entire contact 1.500.15 4.000.15
underplated 0.00127 [.000050] min. [.059.006] [.157.006]
nickel
Breakaway Headers, Unshrouded,

Related Product Data


Double Row, Thru-Hole Mount

Mateable Receptacles
pages 80-84
Product Specification 0.500.02
[.02.001] DIA
108-57197 TYP
2.600.02
[.102.001]
Packaging Method Loose piece,
bag Part Numbers
Dimensions
Position Reflow
A B
240C 265C
4 4.0 [.16] 2.0 [.08] 1470213-4 1734508-4
6 6.0 [.24] 4.0 [.16] 1470213-6 1734508-6

4
8 8.0 [.32] 6.0 [.24] 1470213-8 1734508-8
10 10.0 [.39] 8.0 [.32] 1-1470213-0 1-1734508-0
12 12.0 [.47] 10.0 [.39] 1-1470213-2 1-1734508-2
14 14.0 [.55] 12.0 [.47] 1-1470213-4 1-1734508-4
16 16.0 [.63] 14.0 [.55] 1-1470213-6 1-1734508-6
18 18.0 [.71] 16.0 [.63] 1-1470213-8 1-1734508-8
20 20.0 [.79] 18.0 [.71] 2-1470213-0 2-1734508-0
22 22.0 [.87] 20.0 [.79] 2-1470213-2 2-1734508-2
24 24.0 [.94] 22.0 [.87] 2-1470213-4 2-1734508-4
26 26.0 [1.02] 24.0 [.94] 2-1470213-6 2-1734508-6
28 28.0 [1.10] 26.0 [1.02] 2-1470213-8 2-1734508-8
30 30.0 [1.18] 28.0 [1.10] 3-1470213-0 3-1734508-0
32 32.0 [1.26] 30.0 [1.18] 3-1470213-2 3-1734508-2
34 34.0 [1.34] 32.0 [1.26] 3-1470213-4 3-1734508-4
36 36.0 [1.42] 34.0 [1.34] 3-1470213-6 3-1734508-6
38 38.0 [1.50] 36.0 [1.42] 3-1470213-8 3-1734508-8
40 40.0 [1.57] 38.0 [1.50] 4-1470213-0 4-1734508-0
42 42.0 [1.65] 40.0 [1.57] 4-1470213-2 4-1734508-2
44 44.0 [1.73] 42.0 [1.65] 4-1470213-4 4-1734508-4
46 46.0 [1.81] 44.0 [1.73] 4-1470213-6 4-1734508-6
48 48.0 [1.89] 46.0 [1.81] 4-1470213-8 4-1734508-8
50 50.0 [1.97] 48.0 [1.89] 5-1470213-0 5-1734508-0
52 52.0 [2.05] 50.0 [1.97] 5-1470213-2 5-1734508-2
54 54.0 [2.13] 52.0 [2.05] 5-1470213-4 5-1734508-4
56 56.0 [2.20] 54.0 [2.13] 5-1470213-6 5-1734508-6
58 58.0 [2.28] 56.0 [2.20] 5-1470213-8 5-1734508-8
60 60.0 [2.36] 58.0 [2.28] 6-1470213-0 6-1734508-0
62 62.0 [2.44] 60.0 [2.36] 6-1470213-2 6-1734508-2
64 64.0 [2.52] 62.0 [2.44] 6-1470213-4 6-1734508-4
66 66.0 [2.60] 64.0 [2.52] 6-1470213-6 6-1734508-6
68 68.0 [2.68] 66.0 [2.60] 6-1470213-8 6-1734508-8
70 70.0 [2.76] 68.0 [2.68] 7-1470213-0 7-1734508-0
72 72.0 [2.83] 70.0 [2.76] 7-1470213-2 7-1734508-2
74 74.0 [2.91] 72.0 [2.83] 7-1470213-4 7-1734508-4
76 76.0 [2.99] 74.0 [2.91] 7-1470213-6 7-1734508-6
78 78.0 [3.07] 76.0 [2.99] 7-1470213-8 7-1734508-8
Note: All part numbers are RoHS
compliant. 80 80.0 [3.15] 78.0 [3.07] 8-1470213-0 8-1734508-0

66
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System

2mm Headers, Unshrouded, Double Row, Thru-Hole, Right-Angle Mount


2.000.15
0.5 [.02] Square B [.079.006]
2.00 TYP
Straight Posts 4.000.15
[.079]
[.157.006]
TYP

Material and Finish


Housing Black thermoplastic, 2.600.02 0.80
[.102.001] [.031] DIA TYP
UL 94V-O Rated, 265C Process Capable
Recommended Solder Pad Layout
Posted Contacts Copper alloy,
duplex plated as follows: 0.50
A
[0.02]
0.00020 [.000008] min. gold on contact 0.10
B 2.000.15
2.000.15 [.004]
area, 0.00254 [.000100] min. tin on [.079.006]
[.079.006]
solder area, with entire contact
1.750.15
underplated 0.00127 [.000050] min. 4.000.20 [.069.006] 1.500.15
nickel [.157.008] [.059.006]

Related Product Data


Mateable Receptacles

AMPMODU .025 Square


Interconnection System
pages 80-84
Product Specification 0.500.02
108-57197 [.02.001] DIA TYP 2.000.20
[.079.008]
Packaging Method Loose piece,
bag Dimensions
Position Part Numbers
A B
4 4.0 [0.16] 2.0 [0.08] 1734507-4
6 6.0 [0.24] 4.0 [0.16] 1734507-6
8 8.0 [0.31] 6.0 [0.24] 1734507-8
10
12
14
16
10.0 [0.39]
12.0 [0.47]
14.0 [0.55]
16.0 [0.63]
8.0 [0.31]
10.0 [0.39]
12.0 [0.47]
14.0 [0.55]
1-1734507-0
1-1734507-2
1-1734507-4
1-1734507-6
4
18 18.0 [0.71] 16.0 [0.63] 1-1734507-8
20 20.0 [0.79] 18.0 [0.71] 2-1734507-0
22 22.0 [0.87] 20.0 [0.79] 2-1734507-2
24 24.0 [0.94] 22.0 [0.87] 2-1734507-4
26 26.0 [1.02] 24.0 [0.94] 2-1734507-6
28 28.0 [1.10] 26.0 [1.02] 2-1734507-8
30 30.0 [1.18] 28.0 [1.10] 3-1734507-0
32 32.0 [1.26] 30.0 [1.18] 3-1734507-2
34 34.0 [1.34] 32.0 [1.26] 3-1734507-4
36 36.0 [1.42] 34.0 [1.34] 3-1734507-6
38 38.0 [1.50] 36.0 [1.42] 3-1734507-8
40 40.0 [1.57] 38.0 [1.50] 4-1734507-0
42 42.0 [1.65] 40.0 [1.57] 4-1734507-2
44 44.0 [1.73] 42.0 [1.65] 4-1734507-4
46 46.0 [1.81] 44.0 [1.73] 4-1734507-6
48 48.0 [1.89] 46.0 [1.81] 4-1734507-8
50 50.0 [1.97] 48.0 [1.89] 5-1734507-0
52 52.0 [2.05] 50.0 [1.97] 5-1734507-2
54 54.0 [2.13] 52.0 [2.05] 5-1734507-4
56 56.0 [2.20] 54.0 [2.13] 5-1734507-6
58 58.0 [2.28] 56.0 [2.20] 5-1734507-8
60 60.0 [2.36] 58.0 [2.28] 6-1734507-0
62 62.0 [2.44] 60.0 [2.36] 6-1734507-2
64 64.0 [2.52] 62.0 [2.44] 6-1734507-4
66 66.0 [2.60] 64.0 [2.52] 6-1734507-6
68 68.0 [2.68] 66.0 [2.60] 6-1734507-8
70 70.0 [2.76] 68.0 [2.68] 7-1734507-0
72 72.0 [2.83] 70.0 [2.76] 7-1734507-2
74 74.0 [2.91] 72.0 [2.83] 7-1734507-4
76 76.0 [2.99] 74.0 [2.91] 7-1734507-6
Note: All part numbers are RoHS 78 78.0 [3.07] 76.0 [2.99] 7-1734507-8
compliant. 80 80.0 [3.15] 78.0 [3.07] 8-1734507-0

67
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System

2mm Breakaway Headers, Unshrouded, Double Row, Thru-Hole,


Right-Angle Mount
0.5 [.02] Square
Right-Angle Posts TYP

TYP TYP
Material and Finish
Housing Black thermoplastic,
UL 94V-0 rated
Posted Contacts Brass, duplex 0.5
plated as follows: [.02] TYP

A 0.00020 [.000008] min. gold on L


contact area, 0.00100 [.000039] min. Tin-Lead
DIA TYP
tin on solder area, with entire contact Plated
Area
underplated 0.00130 [.000051] min.
nickel 0.5
[.02] DIA TYP
Breakaway Headers, Unshrouded,

B 0.00076 [.000030] min. gold on


Double Row, Thru-Hole Mount

contact area, 0.00100 [.000039] min.


tin on solder area, with entire contact
underplated 0.00130 [.000051] min.
nickel

Related Product Data


Mateable Receptacles
pages 80-84
Product Specification
108-5296

4 Packaging Method Loose piece, 2.00.08*


[.08.003]
bag Typ.
TYP

DIA TYP

Recommended PC Board Hole Layout DIA TYP


* Hole centerline to be 2.00.08 [.08.003]; tolerances
not to accumulate within one connector pattern.

No. Contact Plating


Dimensions
of Lead Length L = 2.6[.10]**
Positions A B
A B
4 4.0 [0.16] 2.0 [0.08] 5176837-1 2-5176837-5
6 6.0 [0.24] 4.0 [0.16] 5176837-2 2-5176837-6
8 8.0 [0.31] 6.0 [0.24] 5176837-3
10 10.0 [0.39] 8.0 [0.31] 5176837-4
12 12.0 [0.47] 10.0 [0.39] 5176837-5
14 14.0 [0.55] 12.0 [0.47] 5176837-6 3-5176837-0
16 16.0 [0.63] 14.0 [0.55] 5176837-7
18 18.0 [0.71] 16.0 [0.63] 3-5176837-2
20 20.0 [0.79] 18.0 [0.71] 3-5176837-3
22 22.0 [0.87] 20.0 [0.79] 3-5176837-4
26 26.0 [1.02] 24.0 [0.94] 1-5176837-2
30 30.0 [1.18] 28.0 [1.10] 1-5176837-4
32 32.0 [1.26] 30.0 [1.18] 1-5176837-5 3-5176837-9
34 34.0 [1.34] 32.0 [1.26]
AMP/2247 4-5176837-0
36 36.0 [1.42] 34.0 [1.34] AMPMODU 2mm 4-5176837-1
38 38.0 [1.50] 36.0 [1.42] Illustration B
1-5176837-8 4-5176837-2
40 40.0 [1.57] 38.0 [1.50] MPD 6/10/94
1-5176837-9 5-5176837-2
42 42.0 [1.65] 40.0 [1.57] 2-5176837-0 4-5176837-4
44 44.0 [1.73] 42.0 [1.65] 2-5176837-1
46 46.0 [1.81] 44.0 [1.73] 2-5176837-2 4-5176837-6
48 48.0 [1.89] 46.0 [1.81] 2-5176837-3 4-5176837-7
50 50.0 [1.97] 48.0 [1.89] 2-5176837-4 4-5176837-8

68
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System

2mm Breakaway Headers, Unshrouded, Double Row, Thru-Hole,


Vertical Mount
0.5 [.02] Square
Straight Posts

Material and Finish


Housing Black thermoplastic,
UL 94V-0 rated
Posted Contacts Brass, duplex
plated as follows:
Plating A 0.00020 [.000008] min.
gold on contact area, 0.00100 [.000039]
min. tin on solder area, with entire
contact underplated 0.00130 [.000051]
min. nickel

Breakaway Headers, Unshrouded,


Plating B 0.00076 [.000030] min.

Double Row, Thru-Hole Mount


gold on contact area, 0.00100 [.000039]
min. tin on solder area, with entire 0.5
0.5 Typ.
contact underplated 0.00130 [.000051] [.02]
Dia. Typ. [.02]
min. nickel

4.0
Related Product Data [.16]
Mateable Receptacles
pages 80-84
Product Specification
108-5296
Packaging Method Loose piece,
bag
Dia. Typ.
L
Tin Plated
Area 4
2.0 0.08*
[.08 .003]
Typ.

Recommended PC Board Hole Layout


* Hole centerline to be 2.00.08 [.08.003]; tolerances
not to accumulate within one connector pattern.

AMP/2247
AMPMODU 2mm
Illustration A
MPD 6/10/94
69
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System

2mm Breakaway Headers, Unshrouded, Double Row, Thru-Hole,


Vertical Mount (Continued)
0.5 [.02] Square
Straight Posts

No. Dimensions Contact Plating


of Lead Length L = 1.5 [.06] Lead Length L = 2.6 [.10]
Positions A B
Plating A Plating B Plating A Plating B
4 4.0 [0.16] 2.0 [0.08] 5178751-1 2-5178751-5 5176264-1 1-5176264-6
6 6.0 [0.24] 4.0 [0.16] 2-5178751-6 5176264-2 1-5176264-7
8 8.0 [0.31] 6.0 [0.24] 2-5178751-7 5176264-3 1-5176264-8
10 10.0 [0.39] 8.0 [0.31] 5178751-4 2-5178751-8 5176264-4 1-5176264-9
12 12.0 [0.47] 10.0 [0.39] 2-5178751-9 5176264-5 2-5176264-0
14 14.0 [0.55] 12.0 [0.47] 5178751-6 3-5178751-0 5176264-6 2-5176264-1
Breakaway Headers, Unshrouded,

16 16.0 [0.63] 14.0 [0.55] 3-5178751-1 5176264-7 2-5176264-2


Double Row, Thru-Hole Mount

18 18.0 [0.71] 16.0 [0.63] 5178751-8 3-5178751-2 5176264-8 2-5176264-3


20 20.0 [0.79] 18.0 [0.71] 5178751-9 3-5178751-3 5176264-9 2-5176264-4
22 22.0 [0.87] 20.0 [0.79] 1-5178751-0 3-5178751-4 1-5176264-0 2-5176264-5
24 24.0 [0.94] 22.0 [0.87] 1-5178751-1 3-5178751-5 1-5176264-1 2-5176264-6
26 26.0 [1.02] 24.0 [0.94] 1-5178751-2 3-5178751-6
28 28.0 [1.10] 26.0 [1.02] 3-5178751-7 1-5176264-3
30 30.0 [1.18] 28.0 [1.10] 1-5178751-4 3-5178751-8 1-5176264-4 2-5176264-9
32 32.0 [1.26] 30.0 [1.18] 1-5178751-5 3-5178751-9 1-5176264-5
34 34.0 [1.34] 32.0 [1.26] 1-5178751-6 4-5178751-0 4-5176264-0
36 36.0 [1.42] 34.0 [1.34] 1-5178751-7 4-5178751-1 3-5176264-2 4-5176264-1
38 38.0 [1.50] 36.0 [1.42] 1-5178751-8 4-5178751-2 3-5176264-3

4 40
42
44
46
40.0 [1.57]
42.0 [1.65]
44.0 [1.73]
46.0 [1.81]
38.0 [1.50]
40.0 [1.57]
42.0 [1.65]
44.0 [1.73]
1-5178751-9
2-5178751-0
2-5178751-1
2-5178751-2
4-5178751-3
4-5178751-4
4-5178751-5
4-5178751-6
3-5176264-4

3-5176264-6



4-5176264-5
4-5176264-6
48 48.0 [1.89] 46.0 [1.81] 2-5178751-3 4-5178751-7 4-5176264-7
50 50.0 [1.97] 48.0 [1.89] 2-5178751-4 4-5178751-8 3-5176264-9 4-5176264-8

Note: All part numbers are RoHS compliant.


70
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System

2mm Breakaway Headers, Unshrouded, Double Row, Surface Mount,


Vertical Mount
0.5 [.02] Square Straight
A
Posts 0.500.03
[.02.002] TYP
2.00 B
[.08] TYP
Material and Finish
Housing Black polyphenylene
sulfide, UL 94V-0 rated 0.05 1.00 [.04]
4.20 [.003] 0.00
Posted Contacts Phosphor bronze, [.17] -0.00
1.00 [.04]
plated as follows, Duplex plated 0.00020
[.000008] min. gold on contact area,
0.00200 [.000079] min. tin on solder
area, with entire contact underplated
0.00130 [.000051] min. nickel 1.40 MAX 4.200.05
[.06] TYP [.17.003]
Vacuum Cap 0.500.02
C 0.500.02
0.10 [.02.001] TYP [.02.001]
Related Product Data [.004]

Header Assembly, AMPMODU


TYP
Mateable Receptacles
RO.50 D0.25

2mm SMT Vertical


pages 80-84 7.000.02 REF [.01]
[.28.001]
Product Specification
108-51001 1.50 [.06]
1.00 [.04]
Packaging Method Tape & Reel

0.500.02
[.02.001] TYP 2.00 Tin-Lead
[.08] Plating Area

B0.08 [.003]
Tolerances Non-Cumulative

4
1.000.08

[.06] TYP
[.04.003] TYP
1.50
2.60
[.10]
TYP

2.00
[.08] TYP

Recommended Solder Pad Layout

No. of Dimensions Part


Positions A B C Numbers
4 4.0 [0.16] 2.0 [0.08] 4.0 [0.16] 5084476-1
6 6.0 [0.24] 4.0 [0.16] 6.0 [0.24] 5084476-2
12 12.0 [0.47] 10.0 [0.39] 5.0 [0.20] 5084476-7
16 16.0 [0.63] 14.0 [0.55] 8.0 [0.31] 5084476-3

Note: All part numbers are RoHS compliant.


71
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System

2mm Breakaway Headers, Unshrouded, Double Row, Surface Mount,


Vertical Mount (Continued)
0.5 [.02] Square Straight
Posts
A
Material and Finish 3.8
B [.150]
Housing Black polyphenylene
sulfide, UL 94V-0 rated
Posted Contacts Phosphor bronze,
plated as follows, Duplex plated 0.0076 6.50.25
[.256.010]
[.000030] min. gold on contact area,
0.00254-0.00406 [.000100-.000160]
2.00
min. tin on solder area, with entire [.079] TYP
contact underplated 0.00127 [.000050]
min. nickel
0.50
[.02]
Related Product Data TYP
AMPMODU .025 Square
Interconnection System

Mateable Receptacles
pages 80-84 4.5
[.177]
Product Specification
108-18544
Packaging Method Tape & Reel 0.9
3.45
[.136]
[.035]

4 C
B0.08 [.003]
Tolerances Non-Cumulative
1.000.08
[.04.003] TYP
0.50
[.020] TYP

3.75
[.148]
TYP

2.00
[.08] TYP

Recommended Solder Pad Layout

No. of Dimensions Part


Positions A B C Numbers
4 4.0 [0.16] 2.0 [0.08] 7.60 [0.30] 966926-2
6 6.0 [0.24] 4.0 [0.16] 9.60 [0.38] 966926-3
8 8.0 [0.31] 6.0 [0.24] 11.60 [0.46] 966926-4
10 10.0 [0.39] 8.0 [0.31] 13.60 [0.53] 966926-5
12 12.0 [0.47] 10.0 [0.39] 15.60 [0.61] 966926-6
14 14.0 [0.55] 12.0 [0.47] 17.60 [0.69] 966926-7
16 16.0 [0.63] 14.0 [0.55] 19.60 [0.77] 966926-8
18 18.0 [0.71] 16.0 [0.63] 21.60 [0.85] 966926-9
20 20.0 [0.79] 18.0 [0.71] 23.60 [0.93] 1-966926-0
22 22.0 [0.87] 20.0 [0.79] 25.60 [1.01] 1-966926-1
24 24.0 [0.94] 22.0 [0.87] 27.60 [1.09] 1-966926-2

Note: All part numbers are RoHS compliant.


72
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System

2mm Stacking Header, Unshrouded, Double Row, Thru-Hole,


Vertical Mount
0.5 [.02] Square Straight
0.50.03
Posts [0.02.001] 2.54
[.100]

12 Position
Part Number 1734770-1

Material and Finish 9.75


2.0
[.079]
[.384]
Housing Black thermoplastic,
UL 94 V-O Rated
Posted Contacts Copper alloy,
duplex plated as follows:
Gold flash all over contact underplated
0.00127 [.000050] min. nickel
2.0 2.0
[.079] TYP [.079]
2.54
Related Product Data 4.0

2.0 Pitch Vertical


10.0 [.100]
[.039] [.157]
Mateable Receptacles
pages 80-84 12.0
[.047]
Product Specification
108-57331
Packaging Method Loose piece,
bag 2.0 0.80.05
[.079] TYP [0.31.002] DIA
12 Places

2.0
[.079]
10.0
[.394]
4
TYP

Note: All part numbers are RoHS compliant.


73
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System

2mm Headers, Shrouded, Double Row, Thru-Hole, Right-Angle Mount

0.5 [.02] Square Right-Angle 0.50


[.02] Ref.
Posts
6.65
[.262]
26 Position
0.500.03
Part Number 5084780-1 3.60 [0.02.001]
[.142]

Material and Finish


Housing High temperature, black
thermoplastic, UL 94 V-O Rated
28.65
Posted Contacts Copper alloy, [1.128] +0.10
duplex plated as follows: 27.15 -0.05
0.00038 [.000015] min. gold on contact 2.325 2.00 24.00
[1.069] +.004
-.002 3.60
area, 0.00254 [.000100] min. tin on [.092] 2 Places
12 Spaces x [.079] = [.945]
[.142] TYP
solder area, with entire contact 0.75 2.00
2.54
underplated 0.00127 [.000050] min. [.03] Ref. [.079]
2.00 +0.51
[.079] [.100] 2.99 -0.25
nickel 0.500.03 [.118] +.02
2.0 Pitch Right-Angle

6.30 [0.02.001] -.01


[.248] TYP at Soldertail
+0.01 Post Tips
Related Product Data 1.40 -0.05 0.75
4.80 +0.01/-0.22
Mateable Receptacles [.055] +.000 [.03]
[.189 +.004/-.009] 0.50 TYP at 6.400.20
-.002
pages 80 and 84 [.079] Post Tips [.252.008]
0.50 TYP at
Product Specification [.079] Post Tips
108-5296
2.00
Packaging Method Tube [.079]

4
4.10
[.161]

2.000.05 Tolerance
2.000.05
[.079.002] TYP Non-Cumulative
[.079.002] TYP

0.900.05
[.035.002] TYP
Recommended PCB Layout

Note: All part numbers are RoHS compliant.


74
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System

2mm Headers, Shrouded, Double Row, Thru-Hole, Right-Angle Mount


(Continued)

0.5 [.02] Square Right-Angle C


0.20
[ .008]
Posts B
0.20
[ .008]
0.10
A
[ .004]
2.00 0.10
Material and Finish [.079 .004]
Housing Natural color thermoplastic,
UL 94 V-O Rated
Posted Contacts Brass, plated as
follows:
2.00 0.05 5.50 0.15
0.00020 [.000008] min. gold on contact [.079 .002] 2.40
4.50 0.15 [.217 .006]
area, with 0.00254 [.00010] tin on [.094]
[.177 .006]
soldertails, with entire contact
underplated 0.00127 [.000050] min.
5.60 0.15 6.65 0.20
nickel [.220 .006] [.262 .008]
3.60 0.20
[.142 .008]
Related Product Data

2.0 Pitch Right-Angle


Mateable Receptacles 0.50 0.02 3.00 0.20 2.00 0.10
Sq.
pages 80 and 84 [.020 .001] [.118 .008] [.079 .004]

Product Specification A 2.00 Typ.


108-57197 2.00 Typ. [.079]
[.079]
Packaging Method Tubes

0.80
[.031]

4
Recommended PCB Layout

No. of Dimensions
Part Numbers
Positions A B C
8 6.0 [0.24] 8.85 [0.35] 9.95 [0.39] 1734493-8
10 8.0 [0.31] 10.85 [0.43] 11.95 [0.47] 1-1734493-0
12 10.0 [0.39] 12.85 [0.51] 13.95 [0.55] 1-1734493-2
14 12.0 [0.47] 14.85 [0.58] 15.95 [0.63] 1-1734493-4
16 14.0 [0.55] 16.85 [0.66] 17.95 [0.71] 1-1734493-6
18 16.0 [0.63] 18.85 [0.74] 19.95 [0.79] 1-1734493-8
20 18.0 [0.71] 20.85 [0.82] 21.95 [0.86] 2-1734493-0
22 20.0 [0.79] 22.85 [0.90] 23.95 [0.94] 2-1734493-2
24 22.0 [0.87] 24.85 [0.98] 25.95 [1.02] 2-1734493-4
26 24.0 [0.94] 26.85 [1.06] 27.95 [1.10] 2-1734493-6
28 26.0 [1.02] 28.85 [1.14] 29.95 [1.18] 2-1734493-8
30 28.0 [1.10] 30.85 [1.21] 31.95 [1.26] 3-1734493-0
32 30.0 [1.18] 32.85 [1.29] 33.95 [1.34] 3-1734493-2
34 32.0 [1.26] 34.85 [1.37] 35.95 [1.42] 3-1734493-4
36 34.0 [1.34] 36.85 [1.45] 37.95 [1.49] 3-1734493-6
38 36.0 [1.42] 38.85 [1.53] 39.95 [1.57] 3-1734493-8
40 38.0 [1.50] 40.85 [1.61] 41.95 [1.65] 4-1734493-0
42 40.0 [1.57] 42.85 [1.69] 43.95 [1.73] 4-1734493-2
44 42.0 [1.65] 44.85 [1.77] 45.95 [1.81] 4-1734493-4
46 44.0 [1.73] 46.85 [1.84] 47.95 [1.89] 4-1734493-6
48 46.0 [1.81] 48.85 [1.92] 49.95 [1.97] 4-1734493-8
50 48.0 [1.89] 50.85 [2.00] 51.95 [2.05] 5-1734493-0
52 50.0 [1.97] 52.85 [2.08] 53.95 [2.12] 5-1734493-2
54 52.0 [2.05] 54.85 [2.16] 55.95 [2.20] 5-1734493-4
56 54.0 [2.13] 56.85 [2.34] 57.95 [2.28] 5-1734493-6
58 56.0 [2.20] 58.85 [2.32] 59.95 [2.36] 5-1734493-8
60 58.0 [2.28] 60.85 [2.40] 61.95 [2.44] 6-1734493-0
62 60.0 [2.36] 62.85 [2.47] 63.95 [2.52] 6-1734493-2
64 62.0 [2.44] 64.85 [2.55] 65.95 [2.60] 6-1734493-4

Note: All part numbers are RoHS compliant.


75
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System

2mm Headers, Shrouded, Double Row, Surface Mount, Vertical Mount

0.5 [.02] Square Posts C

Material and Finish A


2.00 0.10 5.50
Housing Black color, PA9T (Nylon [.079 .004] [.217]
9T), UL 94 V-O Rated
Posted Contacts Brass, plated as
follows:
0.00076 [.000003] min. gold on contact
area, with 0.00254 [.00010] matte tin on
soldertails, with entire contact 4.50
underplated 0.00127 [.000050] min. 2.00 0.05 Pitch [.177]
nickel [.079 .001]
2.40
[.094]
1.20 Ref. 5.20
Ref.
[.047] [.205] Cap
Related Product Data 8.00
Ref. 5.60 0.15
[.315] 3.60 0.15
[.220 .006]
Mateable Receptacles [.142 .005]
pages 80, 81, and 84
2.0 Pitch Vertical

6.50
[.256]

.0.50
2.60 0.15
[.020] 6.70 0.25
[.102 .005]
[.264 .010]
22.00
[.866]
2.00
Pitch
[..079]

4 1.00
[25.4]

7.50
[1.38]

1.30
Typ.
[.051]
Recommended PCB Layout

No. of Dimensions
Part Numbers
Positions A B C
8 6.0 [0.24] 8.85 [0.35] 9.95 [0.39] 2041068-8
10 8.0 [0.31] 10.85 [0.43] 11.95 [0.47] 1-2041068-0
12 10.0 [0.39] 12.85 [0.51] 13.95 [0.55] 1-2041068-2
14 12.0 [0.47] 14.85 [0.58] 15.95 [0.63] 1-2041068-4
16 14.0 [0.55] 16.85 [0.66] 17.95 [0.71] 1-2041068-6
18 16.0 [0.63] 18.85 [0.74] 19.95 [0.79] 1-2041068-8
20 18.0 [0.71] 20.85 [0.82] 21.95 [0.86] 2-2041068-0
22 20.0 [0.79] 22.85 [0.90] 23.95 [0.94] 2-2041068-2
24 22.0 [0.87] 24.85 [0.98] 25.95 [1.02] 2-2041068-4
26 24.0 [0.94] 26.85 [1.06] 27.95 [1.10] 2-2041068-6
28 26.0 [1.02] 28.85 [1.14] 29.95 [1.18] 2-2041068-8
30 28.0 [1.10] 30.85 [1.21] 31.95 [1.26] 3-2041068-0
32 30.0 [1.18] 32.85 [1.29] 33.95 [1.34] 3-2041068-2
34 32.0 [1.26] 34.85 [1.37] 35.95 [1.42] 3-2041068-4
36 34.0 [1.34] 36.85 [1.45] 37.95 [1.49] 3-2041068-6
38 36.0 [1.42] 38.85 [1.53] 39.95 [1.57] 3-2041068-8
40 38.0 [1.50] 40.85 [1.61] 41.95 [1.65] 4-2041068-0
42 40.0 [1.57] 42.85 [1.69] 43.95 [1.73] 4-2041068-2
44 42.0 [1.65] 44.85 [1.77] 45.95 [1.81] 4-2041068-4
46 44.0 [1.73] 46.85 [1.84] 47.95 [1.89] 4-2041068-6
48 46.0 [1.81] 48.85 [1.92] 49.95 [1.97] 4-2041068-8
50 48.0 [1.89] 50.85 [2.00] 51.95 [2.05] 5-2041068-0

Note: All part numbers are RoHS compliant.


76
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System

2mm Headers, Shrouded, Double Row, Surface Mount, Vertical Mount


(Continued)
0.5 [.02] Square Straight
Posts
A

Material and Finish 1.910.05


2.00 6.2 [0.75.002] 2 Plc.
[.079]
Housing Black high temperature [.244]
thermoplastic, UL 94 V-O Rated
Posted Contacts Phosphor Bronze, 6.35 7.04
duplex plated as follows: [.250] [.277]

0.00076[0.000030] min. gold on contact


area, 0.00381[.000150] min. tin on
solder area, with entire contact B
underplated 0.00127[.000050] min. 4.0
nickel [.157]
3.6
C [.142] Vacuum Adapter Cap

Double Row, Vertical Mount with


Product Specification 1.910.05
108-57328 [0.75.002]
3.02

Receptacle Assemblies,
[.119]

Vacuum Adapter Cap


Packaging Method Tape and reel
4.50
[.177]

2.00
2.00
[.079] TYP 1.09
[.079] [.043] 2 Plc. 1.4
0.51 [.055] 2 Plc.
[.020] TYP

1.2
[.047] TYP
2.00
[.079] TYP 4
7.56
[.298] TYP 1.20
[.047] 2 Plc.

1.14
[.045] TYP D
Recommended PCB Layout

No. of Dimensions
Part Numbers
Positions A B C D
20 26.2 [1.03] 20.0 [0.79] 24.3 [0.96] 16.0 [.63] 2-1734569-0
30 36.2 [1.43] 30.0 [1.18] 34.3 [1.35] 26.0 [1.02] 3-1734569-0

Note: All part numbers are RoHS compliant.


77
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System

2mm Headers, Shrouded, Double Row, Thru-Hole, Vertical Mount

0.5 [.02] Square Straight 1.15


Posts with Cable Shroud [.045]
2.0
[.079] TYP

Material and Finish


4.3
Housing Black thermoplastic, [.169]
UL 94 V-O Rated
2.0 1.35
Posted Contacts Brass, duplex [.079] [.053] TYP
plated as follows: TYP A0.25
0.00254 [.000100] min. tin on contact [.010]
C +0.2/-0.05
area, with entire contact underplated [+.008/-.002]
0.00127 [.000050] min. nickel

Related Product Data B0.3 5.00


[.012] [1.97]
Mateable Receptacles 0.8
0.95 [.031] 3.00.2
See Drawings 1470106 Contacts and [.037]
TYP
[.118.008]
1470107 Housing 1.60
TYP
[0.63]
Product Specification 6.5
Box Header

108-57217 [.256] 3.5


[.138]
Packaging Method Loose piece,
bag
0.50.05
[.02.002]

A
2.00
0.70.1 TYP
[.08]
[.028.004]

4 Recommended PCB Layout

No. of Dimensions
Part Numbers
Position A B C
6 4.0 [0.16] 8.0 [0.31] 6.74 [0.26] 1470109-6
8 6.0 [0.24] 10.0 [0.39] 8.74 [0.34] 1470109-8
10 8.0 [0.31] 12.0 [0.47] 10.74 [0.42] 1-1470109-0
12 10.0 [0.39] 14.0 [0.55] 12.74 [0.50] 1-1470109-2
14 12.0 [0.47] 16.0 [0.63] 14.74 [0.58] 1-1470109-4
16 14.0 [0.55] 18.0 [0.71] 16.74 [0.66] 1-1470109-6
18 16.0 [0.63] 20.0 [0.79] 18.74 [0.74] 1-1470109-8
20 18.0 [0.71] 22.0 [0.87] 20.74 [0.82] 2-1470109-0
22 20.0 [0.79] 24.0 [0.94] 22.74 [0.89] 2-1470109-2
24 22.0 [0.87] 26.0 [1.02] 24.74 [0.97] 2-1470109-4
26 24.0 [0.94] 28.0 [1.10] 26.74 [1.05] 2-1470109-6
28 26.0 [1.02] 30.0 [1.18] 28.74 [1.13] 2-1470109-8
30 28.0 [1.10] 32.0 [1.26] 30.74 [1.21] 3-1470109-0
32 30.0 [1.18] 34.0 [1.34] 32.74 [1.29] 3-1470109-2

Note: All part numbers are RoHS compliant.


78
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System

2mm Headers, Shrouded, Double Row, Thru-Hole, Right-Angle Mount


2.0
0.5 [.02] Square Right-Angle [.079] TYP
0.50.05
Posts with Cable Shroud 1.15 [.02.002]
[.045]

Material and Finish 4.3


Housing Black thermoplastic, [.169]
UL 94 V-O Rated
.079 1.35
Posted Contacts Brass, duplex [2.0] [.053] TYP
plated as follows: A0.25
[.010]
0.00254 [.000100] min. tin on contact C +0.2/-0.05
[+.008/-.002]
area, with entire contact underplated
0.00127 [.000050] min. nickel
5.00
[1.97]
B0.3 0.8
Related Product Data 0.95
TYP
[.012] [.031]
[.037]
Mateable Receptacles
1.60
See Drawings 1470106 Contacts and [0.63]
TYP 7.00

Pitch Right-Angle Mount


1470107 Housing 9.5 3.5 [.276]
[.374] [.138]
Product Specification
108-57217
2.00.1
Packaging Method Loose piece, 3.00.2 [.079.004]
bag [.118.008]

2.00
0.70.1 TYP
[.08]

4
[.028.004]

7.00
[.276]
Recommended PCB Layout

No. of Dimensions
Part Numbers
Position A B C
6 4.0 [0.16] 8.00 [0.31] 6.74 [0.26] 1470108-6
8 6.0 [0.24] 10.00 [0.39] 8.74 [0.34] 1470108-8
10 8.0 [0.32] 12.00 [0.47] 10.74 [0.42] 1-1470108-0
12 10.0 [0.39] 14.00 [0.55] 12.74 [0.50] 1-1470108-2
14 12.0 [0.47] 16.00 [0.63] 14.74 [0.58] 1-1470108-4
16 18.0 [0.71] 18.00 [0.71] 16.74 [0.66] 1-1470108-6
18 14.0 [0.55] 20.00 [0.79] 18.74 [0.74] 1-1470108-8
20 16.0 [0.63] 22.00 [0.87] 20.74 [0.82] 2-1470108-0
22 22.0 [0.87] 24.00 [0.94] 22.74 [0.89] 2-1470108-2
24 20.0 [0.79] 26.00 [1.02] 24.74 [0.97] 2-1470108-4
26 24.0 [0.94] 28.00 [1.10] 26.74 [1.05] 2-1470108-6
28 28.0 [1.10] 30.00 [1.18] 28.74 [1.13] 2-1470108-8
30 26.0 [1.02] 32.00 [1.26] 30.74 [1.21] 3-1470108-0
32 30.0 [1.18] 34.00 [1.34] 32.74 [1.29] 3-1470108-2

Note: All part numbers are RoHS compliant.


79
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System

2mm Centerline Receptacles, Double Row, Thru-Hole, Vertical Mount

Receptacle, Thru-Hole,
Vertical

Material and Finish


Housing Black thermoplastic,
UL 94 V-O Rated, 245C Reflow A0.25
[.01] B0.2
Contacts Copper alloy, plated as [.008]
follows:
A 0.00020 [.000008] min. gold on
contact area, 0.00203 [.000080] min. tin
on solder area, with entire contact
underplated 0.00127 [.000050] min.
2.00.1
nickel [.079.004] 0.36
[.014] 4.00
B 0.00076 [.000030] min. gold on [.157]
contact area, 0.00203 [.000080] min. tin
on solder area, with entire contact L0.1 4.50
underplated 0.00127 [.000050] min. [.004] [.177]
nickel 1.67
2.0 Mount Type

Ref.
[.066]
w/PickUp

0.5 0.5
Related Product Data [.02] [.02]

Mateable Headers 2.00.1 0.20


TYP
TYP [.008]
pages 66-76, 78, 79 [.079.004]
0.750.05
Product Specification TYP
[.030.002]
108-57197
Packaging Method Tray

4 2.00.05
[.079.002]
TYP
2.00.05
[.079.002]
TYP

Recommended PCB Layout

Part Numbers
No. of Dimensions Plating A Plating B
Positions A B Dim. L Dim. L Dim. L Dim. L
1.2+/-0.1 2.6+/-0.1 1.2+/-0.1 2.6+/-0.1
(.047+/-.004) (.102+/-.004) (.047+/-.004) (.102+/-.004)
4 4.0 [.157] 2.0 [.079] 1470209-1 2-1470209-5 5-1470209-1 7-1470209-5
6 6.0 [.236] 4.0 [.157] 1470209-2 2-1470209-6 5-1470209-2 7-1470209-6
8 8.0 [.315] 6.0 [.236] 1470209-3 2-1470209-7 5-1470209-3 7-1470209-7
10 10.0 [.394] 8.0 [.315] 1470209-4 2-1470209-8 5-1470209-4 7-1470209-8
12 12.0 [.472] 10.0 [.394] 1470209-5 2-1470209-9 5-1470209-5 7-1470209-9
14 14.0 [.551] 12.0 [.472] 1470209-6 3-1470209-0 5-1470209-6 8-1470209-0
16 16.0 [.630] 14.0 [.551] 1470209-7 3-1470209-1 5-1470209-7 8-1470209-1
18 18.0 [.709] 16.0 [.630] 1470209-8 3-1470209-2 5-1470209-8 8-1470209-2
20 20.0 [.787] 18.0 [.709] 1470209-9 3-1470209-3 5-1470209-9 8-1470209-3
22 22.0 [.866] 20.0 [.787] 1-1470209-0 3-1470209-4 6-1470209-0 8-1470209-4
24 24.0 [.945] 22.0 [.866] 1-1470209-1 3-1470209-5 6-1470209-1 8-1470209-5
26 26.0 [1.024] 24.0 [.945] 1-1470209-2 3-1470209-6 6-1470209-2 8-1470209-6
28 28.0 [1.102] 26.0 [1.024] 1-1470209-3 3-1470209-7 6-1470209-3 8-1470209-7
30 30.0 [1.181] 28.0 [1.102] 1-1470209-4 3-1470209-8 6-1470209-4 8-1470209-8
32 32.0 [1.260] 30.0 [1.181] 1-1470209-5 3-1470209-9 6-1470209-5 8-1470209-9
34 34.0 [1.339] 32.0 [1.260] 1-1470209-6 4-1470209-0 6-1470209-6 9-1470209-0
36 36.0 [1.417] 34.0 [1.339] 1-1470209-7 4-1470209-1 6-1470209-7 9-1470209-1
38 38.0 [1.496] 36.0 [1.417] 1-1470209-8 4-1470209-2 6-1470209-8 9-1470209-2
40 40.0 [1.575] 38.0 [1.496] 1-1470209-9 4-1470209-3 6-1470209-9 9-1470209-3
42 42.0 [1.654] 40.0 [1.575] 2-1470209-0 4-1470209-4 7-1470209-0 9-1470209-4
44 44.0 [1.732] 42.0 [1.654] 2-1470209-1 4-1470209-5 7-1470209-1 9-1470209-5
46 46.0 [1.811] 44.0 [1.732] 2-1470209-2 4-1470209-6 7-1470209-2 9-1470209-6
48 48.0 [1.890] 46.0 [1.811] 2-1470209-3 4-1470209-7 7-1470209-3 9-1470209-7
50 50.0 [1.969] 48.0 [1.890] 2-1470209-4 4-1470209-8 7-1470209-4 9-1470209-8

Note: All part numbers are RoHS compliant.


80
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System

2mm Centerline Receptacles, Double Row, Thru-Hole, Vertical Mount (Continued)

Receptacle, Thru-Hole,
Vertical

Material and Finish


Housing Black thermoplastic,
UL 94 V-O Rated, 265C Process Capable A0.25
[.01] B0.2
Contacts Copper alloy, plated as [.008]
follows:
A 0.00020 [.000008] min. gold on
contact area, 0.00203 [.000080] min. tin
on solder area, with entire contact
underplated 0.00127 [.000050] min.
2.00.1
nickel [.079.004] 0.36
[.014] 4.00
B 0.00076 [.000030] min. gold on [.157]
contact area, 0.00203 [.000080] min. tin
on solder area, with entire contact L0.1 4.50
underplated 0.00127 [.000050] min. [.004] [.177]
nickel 1.67

2.0 Mount Type


Ref.
[.066]

w/PickUp
0.5 0.5
Related Product Data [.02] [.02]

Mateable Headers 2.00.1 0.20


TYP
0.750.05 TYP [.008]
pages 66-76, 78, 79 TYP [.079.004]
[.030.002]
Product Specification
108-57197
Packaging Method Tray

2.00.05
[.079.002]
TYP
2.00.05
[.079.002]
TYP

Recommended PCB Layout


4
Part Numbers
No. of Dimensions Plating A Plating B
Positions A B Dim. L Dim. L Dim. L Dim. L
1.2+/-0.1 2.6+/-0.1 1.2+/-0.1 2.6+/-0.1
(.047+/-.004) (.102+/-.004) (.047+/-.004) (.102+/-.004)
4 4.0 [.157] 2.0 [.079] 1734506-1 2-1734506-5 5-1734506-1 7-1734506-5
6 6.0 [.236] 4.0 [.157] 1734506-2 2-1734506-6 5-1734506-2 7-1734506-6
8 8.0 [.315] 6.0 [.236] 1734506-3 2-1734506-7 5-1734506-3 7-1734506-7
10 10.0 [.394] 8.0 [.315] 1734506-4 2-1734506-8 5-1734506-4 7-1734506-8
12 12.0 [.472] 10.0 [.394] 1734506-5 2-1734506-9 5-1734506-5 7-1734506-9
14 14.0 [.551] 12.0 [.472] 1734506-6 3-1734506-0 5-1734506-6 8-1734506-0
16 16.0 [.630] 14.0 [.551] 1734506-7 3-1734506-1 5-1734506-7 8-1734506-1
18 18.0 [.709] 16.0 [.630] 1734506-8 3-1734506-2 5-1734506-8 8-1734506-2
20 20.0 [.787] 18.0 [.709] 1734506-9 3-1734506-3 5-1734506-9 8-1734506-3
22 22.0 [.866] 20.0 [.787] 1-1734506-0 3-1734506-4 6-1734506-0 8-1734506-4
24 24.0 [.945] 22.0 [.866] 1-1734506-1 3-1734506-5 6-1734506-1 8-1734506-5
26 26.0 [1.024] 24.0 [.945] 1-1734506-2 3-1734506-6 6-1734506-2 8-1734506-6
28 28.0 [1.102] 26.0 [1.024] 1-1734506-3 3-1734506-7 6-1734506-3 8-1734506-7
30 30.0 [1.181] 28.0 [1.102] 1-1734506-4 3-1734506-8 6-1734506-4 8-1734506-8
32 32.0 [1.260] 30.0 [1.181] 1-1734506-5 3-1734506-9 6-1734506-5 8-1734506-9
34 34.0 [1.339] 32.0 [1.260] 1-1734506-6 4-1734506-0 6-1734506-6 9-1734506-0
36 36.0 [1.417] 34.0 [1.339] 1-1734506-7 4-1734506-1 6-1734506-7 9-1734506-1
38 38.0 [1.496] 36.0 [1.417] 1-1734506-8 4-1734506-2 6-1734506-8 9-1734506-2
40 40.0 [1.575] 38.0 [1.496] 1-1734506-9 4-1734506-3 6-1734506-9 9-1734506-3
42 42.0 [1.654] 40.0 [1.575] 2-1734506-0 4-1734506-4 7-1734506-0 9-1734506-4
44 44.0 [1.732] 42.0 [1.654] 2-1734506-1 4-1734506-5 7-1734506-1 9-1734506-5
46 46.0 [1.811] 44.0 [1.732] 2-1734506-2 4-1734506-6 7-1734506-2 9-1734506-6
48 48.0 [1.890] 46.0 [1.811] 2-1734506-3 4-1734506-7 7-1734506-3 9-1734506-7
50 50.0 [1.969] 48.0 [1.890] 2-1734506-4 4-1734506-8 7-1734506-4 9-1734506-8
40* 40.0 [1.575] 38.0 [1.496] 4-1734506-9 9-1734506-9
*Keying position 6.
Note: All part numbers are RoHS compliant.
81
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System

2mm Receptacle, Double Row, Surface Mount, Right-Angle Mount

Receptacle, Surface Mount,


Right-Angle

Material and Finish


Housing Black Thermoplastic,
UL 94V-0 Rated
0.600.05
Contact Phosphor Bronze [.024.002] TYP
Contact Finish 0.00020 [.000008]
Min. Gold Plated on Contact Area,
0.00229 [.000090] Min. Tin Plated on
Solder Tail, 0.00127 [.000050] Min. A0.25
Nickel Underplated Over All [.01]
B0.10
[.004]
2.000.05 5.00.2
1.10 [.079.002]
TYP [.197.008]
Related Product Data [.042]
0.150.03
Mateable Headers pages 66-73 2.00 [.006.001]
4.900.25 4.900.25
[.079]
Product Specification [.193.01] [.193.01]
2mm Receptacle

108-57197
4.00
Packaging Method Tape and reel 0.90 [.157] 8.300.5
[.035] [.327.02]

2.00
TYP
[.079]
B

9.00
[.354]

4 4.00
[.157]
TYP

1.00
TYP
[.039]
Recommended PCB Layout

Dimensions
Position Part Numbers
A B
6 6.20 [.244] 4.0 [.157] 1734606-6
8 8.20 [.323] 6.0 [.236] 1734606-8
10 10.20 [.402] 8.0 [.315] 1-1734606-0
12 12.20 [.480] 10.0 [.394] 1-1734606-2
14 14.20 [.559] 12.0 [.472] 1-1734606-4
16 16.20 [.638] 14.0 [.551] 1-1734606-6
18 18.20 [.717] 16.0 [.630] 1-1734606-8
20 20.20 [.795] 18.0 [.709] 2-1734606-0
22 22.20 [.874] 20.0 [.787] 2-1734606-2
24 24.20 [.953] 22.0 [.866] 2-1734606-4
26 26.20 [1.031] 24.0 [.945] 2-1734606-6
28 28.20 [1.110] 26.0 [1.024] 2-1734606-8
30 30.20 [1.189] 28.0 [1.102] 3-1734606-0
32 32.20 [1.268] 30.0 [1.181] 3-1734606-2
34 34.20 [1.346] 32.0 [1.260] 3-1734606-4
36 36.20 [1.425] 34.0 [1.339] 3-1734606-6
38 38.20 [1.504] 36.0 [1.417] 3-1734606-8
40 40.20 [1.583] 38.0 [1.496] 4-1734606-0
42 42.20 [1.661] 40.0 [1.575] 4-1734606-2
44 44.20 [1.740] 42.0 [1.654] 4-1734606-4
46 46.20 [1.819] 44.0 [1.732] 4-1734606-6
48 48.20 [1.898] 46.0 [1.811] 4-1734606-8
50 50.20 [1.976] 48.0 [1.890] 5-1734606-0

Note: All part numbers are RoHS compliant.


82
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System

2mm Receptacle, Double Row, Thru-Hole, Right-Angle Mount

Receptacle, Thru-Hole, 0.35 7.20.15


Right-Angle [.014] [.283.006]
A

4.850.15
Material and Finish [.191.006]
Housing Black Thermoplastic,
UL 94V-0 Rated
30.02 1.45
Contact Phosphor Bronze 20.05
[.118.001]
[.079.002] [.057]
Contact Finish 0.00020 [.000008]
Min. Gold Plated on Contact Area, 0.50.05 A
[.02.002] 1.50.05 0.20.03
0.00254 [.000100] Min. Tin Plated on 20.15 [.059.002] [.008.001]
5.2
Solder Tail, 0.00127 [.000050] Min. [.079.006] A0.10 [.205]
Nickel Underplated Over All [.004] 2.00
B0.20 [.079]
[.008]
Section A-A
Related Product Data 2.00 A 2.00
[.079] [.079]
Mateable Headers pages 66-73 TYP TYP

Product Specification

2mm Receptacle
108-57197
.080
Packaging Method Tube [.031] DIA TYP
Recommended PCB Layout

Dimensions
Position Part Numbers
A B
8 6.0 [.236] 8.50 [.335] 1734531-8
10 8.0 [.315] 10.50 [.413] 1-1734531-0
12 10.0 [.394] 12.50 [.492] 1-1734531-2
14
16
18
12.0 [.472]
14.0 [.551]
16.0 [.630]
14.50 [.571]
16.50 [.650]
18.50 [.728]
1-1734531-4
1-1734531-6
1-1734531-8
4
20 18.0 [.709] 20.50 [.807] 2-1734531-0
22 20.0 [.787] 22.50 [.886] 2-1734531-2
24 22.0 [.866] 24.50 [.965] 2-1734531-4
26 24.0 [.945] 26.50 [1.043] 2-1734531-6
28 26.0 [1.024] 28.50 [1.122] 2-1734531-8
30 28.0 [1.102] 30.50 [1.201] 3-1734531-0
32 30.0 [1.181] 32.50 [1.280] 3-1734531-2
34 32.0 [1.260] 34.50 [1.358] 3-1734531-4
36 34.0 [1.339] 36.50 [1.437] 3-1734531-6
38 36.0 [1.417] 38.50 [1.516] 3-1734531-8
40 38.0 [1.496] 40.50 [1.594] 4-1734531-0
42 40.0 [1.575] 42.50 [1.673] 4-1734531-2
44 42.0 [1.654] 44.50 [1.752] 4-1734531-4
46 44.0 [1.732] 46.50 [1.831] 4-1734531-6
48 46.0 [1.811] 48.50 [1.909] 4-1734531-8
50 48.0 [1.890] 50.50 [1.988] 5-1734531-0
52 50.0 [1.969] 52.50 [2.067] 5-1734531-2
54 52.0 [2.047] 54.50 [2.146] 5-1734531-4
56 54.0 [2.123] 56.50 [2.224] 5-1734531-6
58 56.0 [2.205] 58.50 [2.303] 5-1734531-8
60 58.0 [2.283] 60.50 [2.381] 6-1734531-0
62 60.0 [2.362] 62.50 [2.461] 6-1734531-2
64 62.0 [2.441] 64.50 [2.539] 6-1734531-4
66 64.0 [2.520] 66.50 [2.618] 6-1734531-6
68 66.0 [2.598] 68.50 [2.697] 6-1734531-8
70 68.0 [2.677] 70.50 [2.776] 7-1734531-0
72 70.0 [2.756] 72.50 [2.854] 7-1734531-2
74 72.0 [2.834] 74.50 [2.933] 7-1734531-4
76 74.0 [2.913] 76.50 [3.012] 7-1734531-6
78 76.0 [2.992] 78.50 [3.091] 7-1734531-8
80 78.0 [3.071] 80.50 [3.169] 8-1734531-0

Note: All part numbers are RoHS compliant.


83
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System

2mm Receptacle, Double Row, Surface Mount, Vertical Mount

Receptacle, Top Entry, B0.20


Surface Mount [.008]
A0.10
2.000.05 [.004] X
Material and Finish [.079.002]

HousingBlack Thermoplastic, 4.000.15


[.157.006]
UL 94V-0 Rated
0.500.05
ContactCopper Alloy, plated 0.00076 2.000.05
[.020.002]
[.079.002] X 6.000.15
[.000030] Min. Gold Plated on Contact [.236.006] 2.00
Area, 0.00254 [.000100] Tin Plated on B8.00/2.002.00
[.079]
Solder Tail, Underplated 0.00127 8.000.15 [.315/.079.079]
[.315.006]
[.000050] Nickel +0.25
4.800.15 4.70
Cavity Mark
CapThermoplastic 4.250.15
Location
[.189.006] -0.13
[.167.006] +0.01
[.185 ]
-.005
0.400.05 Alignment Peg 2 0.710.05
Related Product Data 0.960.10 [.016.002] 2 Plc. Plc. Ref. [.028.002]
[.038.004]
Mateable Headerspages 66-75, A+2.000.10 0.200.03 5.100.50
78, 79 [.079.004] [.008.001] [.201.020]
2mm Receptacle

Product Specification 1a 1b
108-57227
Packaging MethodTape and reel

2.00 2.00
[.079] TYP [.079] TYP
2.25 A 2.25 A
[.089] 1.12 [.089] 1.12
[.044] [.044]
6.00 6.00

4
[.236] [.236]

0.850.05 A+2.00
[.033.002] DIA TYP [+.079]
2 Plc. Recommended PCB Layout
Recommended PCB Layout (Without Alignment Peg)

Dimensions 245C Reflow Part Numbers 265C Reflow Part Numbers


Position
A B with Alignment Peg* without Alignment Peg with Alignment Peg* without Alignment Peg
8 6.0 [.236] 8.40 [.331] 1734516-8 5-1734516-8 2041069-8 5-2041069-8
10 8.0 [.315] 10.40 [.409] 1-1734516-0 6-1734516-0 1-2041069-0 6-2041069-0
12 10.0 [.394] 12.40 [.488] 1-1734516-2 6-1734516-2 1-2041069-2 6-2041069-2
14 12.0 [.472] 14.40 [.567] 1-1734516-4 6-1734516-4 1-2041069-4 6-2041069-4
16 14.0 [.551] 16.40 [.646] 1-1734516-6 6-1734516-6 1-2041069-6 6-2041069-6
18 16.0 [.630] 18.40 [.724] 1-1734516-8 6-1734516-8 1-2041069-8 6-2041069-8
20 18.0 [.709] 20.40 [.803] 2-1734516-0 7-1734516-0 2-2041069-0 7-2041069-0
22 20.0 [.787] 22.40 [.881] 2-1734516-2 7-1734516-2 2-2041069-2 7-2041069-2
24 22.0 [.866] 24.40 [.961] 2-1734516-4 7-1734516-4 2-2041069-4 7-2041069-4
26 24.0 [.945] 26.40 [1.039] 2-1734516-6 7-1734516-6 2-2041069-6 7-2041069-6
28 26.0 [1.024] 28.40 [1.118] 2-1734516-8 7-1734516-8 2-2041069-8 7-2041069-8
30 28.0 [1.102] 30.40 [1.197] 3-1734516-0 8-1734516-0 3-2041069-0 8-2041069-0
32 30.0 [1.181] 32.40 [1.276] 3-1734516-2 8-1734516-2 3-2041069-2 8-2041069-2
34 32.0 [1.260] 34.40 [1.354] 3-1734516-4 8-1734516-4 3-2041069-4 8-2041069-4
36 34.0 [1.339] 36.40 [1.433] 3-1734516-6 8-1734516-6 3-2041069-6 8-2041069-6
38 36.0 [1.417] 38.40 [1.512] 3-1734516-8 8-1734516-8 3-2041069-8 8-2041069-7
40 38.0 [1.496] 40.40 [1.591] 4-1734516-0 9-1734516-0 4-2041069-0 9-2041069-0
*See views 1a and 1b

Note: All part numbers are RoHS compliant.


84
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

AMPMODU .025 [0.64] Square Interconnection System

AMPMODU Headers and Receptacles, .100 [2.54] Centerline

87605-1
Bulkhead
6-534237-8
Header
SR Top Entry
6-535541-0
SR Top Entry 6-146257-0
87220-8 DR VT BA
SR VT
6-146281-0
SR VT BA 7-146268-5
87227-5 DR VT-RET BA
DR VT 102699-4
6-146490-5 6-534206-0 DR AP
DR Stacking DR Top Entry
Header
5-103166-3
6-146293-0 DR RA
SR VT-RET BA

103336-5
SR AP
103577-3 5-103168-3
DR VT

Interconnection System
87230-6

AMPMODU
DR RA 103542-9
DR AP
87232-9 5-103164-3
SR RA 5535512-1 3/4 DR RA
DR HORZ
5-102203-7
534267-1 SR RA
5-146427-5 DR Outrigger DE 6-146308-0
Legend: DR RA-RET BA DR RA BA
SR Single Row 5-103414-8
DR
VT
RA
RET
Double Row
Vertical
Right Angle
Retention Feature
5535676-9
SR HORZ
6-146306-0
SR RA-RET BA 5-146304-6
SR VT
6-534998-3
DR Top Entry
5
AP ACTION PIN SR RA
BE Bottom Entry 5-87879-7
3/4 3-Sided-Shrouded Header SR Bottom Entry
BA Breakaway
TR Triple Row
SMT Surface Mount
HORZ Horizontal
DE Dual Entry

For drawings, technical data or samples, contact your TE sales engineer or call the TE Product Information Center: 1-800-522-6752

Note: All part numbers are RoHS compliant.


85
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

AMPMODU .025 [0.64] Square Interconnection System (Continued)

AMPMODU Headers and Receptacles, .100 [2.54] Centerline

5-146134-9
5-146132-4
DR VT SMT
SR VT SMT
6-146474-0
SR Stacking Header

5-147720-9
SR Outrigger DE

5-535542-3
DR DE 5147722-9
SR HOR2 SMT

5-103817-2
TR VT
Interconnection System

1-147070-1
AMPMODU

5-147738-5
.045 Sq. Continuous Post
SR VT SMT DE

1-147333-1
.025 Sq. Continuous Post
6-147105-0
Legend: DR VT SMT DE
SR Single Row 5147721-4

5 DR Double Row SR HORZ SMT


VT Vertical
RA Right Angle
RET Retention Feature
AP ACTION PIN
BE Bottom Entry
3/4 3-Sided-Shrouded Header
BA Breakaway
TR Triple Row
SMT Surface Mount
HORZ Horizontal
DE Dual Entry

For drawings, technical data or samples, contact your TE sales engineer or call the TE Product Information Center: 1-800-522-6752

Note: All part numbers are RoHS compliant.


86
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

AMPMODU .025 [0.64] Square Interconnection System


The AMPMODU intercon- Board mounted receptacle AMPMODU mating posts connection between two
nection system provides assemblies are available in are supplied typically as subassemblies, such as a
interconnections with a various geometries, offering headers. They are available power supply and an asso-
unique modular concept, packaging interconnections in various populations to ciated subassembly.
utilizing precision formed that include perpendicular, meet the interconnection It is also important to note
receptacle contacts and parallel and stacking and packaging require- this product can serve as an
mating posts. capabilities. ments of most systems. interconnection in more than
Mating of the post and Crimp snap-in pins for However, in instances where one level, depending on the
receptacle contacts of 26-22 AWG [0.12-0.4 mm2] packaging configurations application.
this system is very tolerant. wire and crimp snap-in do not lend themselves to
the economies of headers, The .025 [0.64] square
This is made possible by receptacles for 32-20 AWG
TE can provide application interconnection system
a post with a burr-free [0.03-0.6 mm2] wire provide
equipment for the discrete offers the most complete
lead-in and a receptacle excellent discrete wire
location of individual posts. line of post/receptacle pack-
contact featuring double terminations. Housings for
aging products available
cantilever beams and anti- these contacts provide ease Looking at the electronic today. This system, rated at
overstress stops. of handling terminations in industry's standard levels of 3 amperes per contact, has
high density applications. packaging, the AMPMODU
AMPMODU receptacle been used by almost every
contacts and posts categori- Machine applied termina- .025 [0.64] square intercon- industry and marketplace
cally fall into three general tions, through matched nection system is primarily over the last decade and is
classifications of products, application equipment, are used in levels three and four. one of the oldest, most ver-
which include: board geared for virtually any pro- In level three it is used as satile and reliable intercon-
mounted posts and recepta- duction volume requirement, a connection between two nection systems employing
cle assemblies, post headers for the lowest possible or more printed circuits. .025 [0.64] square packag-
and wire-applied contact applied cost. A mother/daughter board ing technology.

AMPMODU .025 Square


Interconnection System
housings for crimp snap-in connection is typical. In
pin and receptacle contacts. level four it is used as a

Terms Explained
Receptacle Contacts The AMPMODU receptacle The configuration of the Insulation
Support
cross-section is primarily receptacle completely Barrel
rectangular, with rounded encloses the spring members Wire
Crimp
corners. Two integral canti- preventing damage during

5
Barrel
lever beams contact the handling and assembly and Ruggedself-
supporting
mating square or round makes the system compati- one-piece
male posts. Deflection of ble with automatic applica- contact body
these spring members is tion techniques.
limited by anti-overstress Note: Application of a contact lubricant is part
Reliabilitydual
cantilever spring
stops, and excessive per- of the manufacturing process of all AMPMODU contact design
manent deformation is pre- tin-plated crimp products. However, it is not and built-in
part of the manufacturing process of products anti-overstress
vented. This feature allows that customers will solder, then clean. For Wire entry for post to
a wide range for these products, TE recommends that
receptacle misalignment
tolerance of misalignment customers use contact lubricant. Offers standard, intermediate and
of mating contacts. See the TE web page for further information. high pressure contact forces

Wide
Cantilever Misalignment
Beams Tolerance

Anti-overstress

Receptacle-Closed Contact edges Metallic


Closed Entry
Entry Housing Design enclosed in
plastic
post stop

Contact edges
enclosed in
The closed entry housing plastic
style better eliminates the
chance of a mating post
stubbing on the edges of
the receptacle contact. Access Way

87
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Wire-to-Board, .100 [2.54] Centerline Products

Wire Sizes Wire Size


Product Family
AWG [mm2]
20 0.5-0.6 Locking Clip, Mod. IV, IV.v, V, MT, Short Point
22-30 0.3-0.05 Locking Clip, Mod. IV, IV.v, V, MTE, MT, Short Point
32 0.03 Mod. IV, IV.v, V, Short Point

Contact Platings Platings Product Family


.000015 [0.00038]
Gold Mod. IV, IV.v, V, MTE, MT, Short Point
.000030 [0.00076] Locking Clip, Mod. IV, IV.v, V, MTE, MT, Short Point
Gold
.000050 [0.00127] Locking Clip, Mod. IV, IV.v, V, MT
Gold
Tin Locking Clip, Mod. IV, IV.v, V, MTE, MT, Short Point

Mating Post Lengths Post Lengths Product Family


.210-.283 [5.33-7.19] Mod. IV (.600 [15.24] Profile Height)
.205-.283 [5.21-7.19] Mod. IV.v (.600 [15.24] Profile Height)
.185-.283 [4.70-7.19] Mod. V (.600 [15.24] Profile Height)
.256-.323 [6.50-8.20] Mod. IV (.645 [16.38] Profile Height)
Wire-to-Board

.251-.323 [6.38-8.20] Mod. IV.v (.645 [16.38] Profile Height)


Products

.231-.323 [5.87-8.20] Mod. V (.645 [16.38] Profile Height)


.222-.273 [5.64-6.93] MT Assembly with Standard Pressure Contacts
.200-.273 [5.08-6.93] MT Assembly with High Pressure Contacts
.200-.250 [5.08-6.35] MTE Assembly
.169-.259 [4.29-6.58] Short Point Connector Assembly
.273-.350 [6.93-8.89] Locking Clip (Connector Assembly)
.200-.277 [5.08-7.04] Locking Clip (Single Contact)

5 Application Tooling Product Family


Application Tooling
Description Mod. IV, Locking Short
IV.v, V MT Clip MTE Point Level V
Manual Hand Tools (Wire Crimp)
Manual Hand Tools (IDC)
AMP-O-MATIC Stripper/Crimper
Machines with Applicator
CHAMPOMATOR
Model 2.5 Machine
CHAMPOMATOR
Model 3A Machine
AMP-O-LECTRIC
Machines with Applicator
Pneumatic Hand Tools
IDC Electric Power Unit
Tube-Fed Ribbon
Cable Machine
AMPOMATOR CLS Machines
Discrete Wire Machine
Manual Arbor Tool
Pneumatic Arbor Tool

88
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Board-to-Board Solutions Guide, .100 [2.54] Centerline Products


Single-Row Single-Row Double-Row Double-Row
Problem or Concern TE's Vertical Headers Right-Angle Headers, Vertical Headers Right-Angle Headers,
Potential Solution and Receptacles Horizontal Receptacles and Receptacles Horizontal Receptacles
(Page Ref.) (Page Ref.) (Page Ref.) (Page Ref.)
HEADERS Retention Feature:
Headers Float Off Board Unshrouded 102 103 198 199
Soldering Operation Shrouded 104, 199 105, 200
Header Contacts Damaged
During Manufacturing Shrouded HEADERS: 115 116 117-121 122-128
Operation or In-Field Use Standard Profile
Press-Fit ACTION PIN POST
HEADERS:
Unshrouded 146 147
Shrouded 148, 149, 199
Machine Applied
Posts 163, 164
Board/Backplane Requires Surface-Mount Compatible Thru-Hole:
High Temperature Surface- HEADERS:
Mount Compatibility Unshrouded 102* 103* 104* 105*
Shrouded 130*, 137* 138*
(Low Profile)
RECEPTACLES 196* 195*
Surface-Mount:
HEADERS 109* 110
RECEPTACLES 187, 188 172 189-192 173
Application Requires Board Two-Piece Family: w/Guide Posts:
Guidance, Polarization and/or HEADERS 198, 199 200
Blind-Mate Capability RECEPTACLES 196* 195*
Mod IV Low Profile
RECEPTACLES:
Reduction in Parallel TOP ENTRY:
Board-to-Board Stack Height Thru-Hole 178 179, 180*
Necessary (Refer to Parallel Surface-Mount
Stack Guide on Page 62.) BOTTOM ENTRY:
Thru-Hole 177
Surface-Mount
DUAL ENTRY
Thru-Hole 181 182-184
Surface Mount 187, 188 189-192

.100 [2.54] Centerline


Soldering Problems with RECEPTACLES:
Thru-Hole Bottom Entry Bottom Entry
Receptacles (Must Mask Outrigger
Post Holes in Board During (Separate Holes for 181 182

Products
Soldering Operation) Receptacle Leads
and Mating Leads)
End-to-End Stackable:
HEADERS (Unshrouded):
Application Requires Thru-Hole 93, 102 94, 95, 103* 96, 97, 104* 98. 99. 105
Connectors to be End-to-End Thru-Hole* 102* 103* 104* 108*
Stackable on .100 [2.54] Grid Surface-Mount 109* 110*
RECEPTACLES:
Thru-Hole 175, 177, 178, 181 169* 176, 179, 180*, 182*, 183, 184 170
Surface Mount 188 172 191, 192 173

*High temperature compatible version, refer to page ref. listed.

Wire-to-Board Solutions Guide, .100 [2.54] Centerline Products 5


Customer Requirement TE's Potential Solution Catalog Page(s)
Mod IV Polarized Housing 220
Application Requires MTE Latched Receptacle and Header 230, 231, 244-250
Guidance, Polarization MT with Polarizing Covers 256-258
Short Point Polarized Housing 224
Wire-to-Wire Application Mod IV Receptacle Contacts and Pins 211-213
Wire-to-Wire Application (Latched) MTE Latched Receptacle and Shrouded Pin Assembly 230, 231, 236, 237
Wire-to-Wire Application (Through Panel) MTE Panel Mount 242
High Vibration and Shock Applications Locking Clip Contacts and Housings 207-209
Printed Circuit Board Polarization MTE Header with PC Board Orientation Peg 248, 249
MTE Surface Mount Headers 251, 252
Board Requires Surface Mount Capability
MTE High Temperature Compatible Headers 249, 250
Need to mate to Mod IV Ejection Housing 220
AMP-LATCH Eject Headers
MT with Eject Covers 256-259
Need to Minimize Strain to Cable
Mod IV Housing with Strain Relief 218, 219
Application Requires Locking Clip Contacts 207, 298
Self-Retaining Contacts
Header Secured to Board MTE Headers with Post Retention or Holddowns 244-250
During/Prior to Soldering
Mate to Unshrouded Header Mod IV plain Housing with Mod V Contacts 213, 214, 216
with Retention Requirements MTE with High Pressure Contacts 234, 235
Multiple Cables to be MTE Coupling Shroud, Double- or Single-Row 240, 241
Common to One Header
Right-Angle Cable Dress MT with Hermaphroditic Covers 229, 256, 257, 259
Application Requires Crimp Short Point Contacts 222
Contacts and MTE Housings
Housings and End-to-End and Short Point Double-Row Housing, 223, 228, 229
Side-to-Side Stackable MTE Plain Housing
Connector Must Mate to Short Point Contacts 222
Post Lengths of .169 [4.29] Min.

89
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Mating Post Selection Guide


The following selection Posts Without Shoulders Posts With Shoulders
guide is provided to help in For drawn wire products For product having the
choosing a mating product (ie, AMPMODU Breakaway shoulder of the post
after a receptacle, header and Low Profile Headers) extending above the hous-
or post has been selected. and for products having the ing or pc board surface
In some instances refer- shoulder of the post below (ie, Standard AMPMODU
ences are given on the cat- the housing or pc board Shrouded and Unshrouded
alog page to specific mat- surface (ie, AMPMODU Headers) the effective mat-
ing connectors. In other MTE and Single Row ing length starts at the top
instances the reader is Shrouded Headers) the of the shoulder.
referred here to the selec- effective mating length
tion guide for mating prod- starts at the housing or
uct recommendations. pc board surface. Effective
Mating
If your application require- Length
ment is not answered here,
consult TE for further Effective
Mating
recommendations. Length

Recommended Recommended
Effective Effective
Receptacle Type Mating Posts Lengths Receptacle Type Mating Posts Lengths
Selection Guide
Mating Post

Minimum Maximum Minimum Maximum


AMPMODU Mod II Horizontal Board Mount Short Point Housing with Contacts
Receptacle, Single and Double Row, Short .230 [5.84] .280 [7.11] pages 222-224 .169 [4.29] .259 [6.58]
Point-of-Contactpages 169, 170, 172, 173 AMPMODU MTE Unloaded Housing with .169 [4.29] .259 [6.58]
AMPMODU Mod II Vertical Board Mount Short Point Contactspages 222, 229, 231, 233
Receptacle, Single Row, Standard Profile, .183 [4.65] .330 [8.38] AMPMODU MTE
Top Entrypage 175 .200 [5.08] .250 [6.35]
IDC Assemblies
AMPMODU Mod II Vertical AMPMODU MT IDC Assembly with
Board Mount Receptacle, Standard .222 [5.64] .273 [6.93]
.183 [4.65] .330 [8.38] Standard Pressure Contactspage 256
Profile, Double Row, Top Entry,
100 x .100 mt.page 176 AMPMODU MT IDC Assembly with .200 [5.08] .273 [6.93]

5
High Pressure Contactspage 257
AMPMODU Mod IV Vertical
Board Mount Receptacle, Low Locking Clip Housing with .273 [6.93] .350 [8.89]
Profile, Single Row, Top Entry, Single Tine .183 [4.65] .255 [6.48] Contactspages 207-209
page 178 Locking Clip Contact without .200 [5.08] .277 [7.04]
AMPMODU Mod IV Vertical Housingpage 207
Board Mount Receptacle, Low Flexible Flat Conductor Cable Single Row .267 [6.78] .323 [8.20]
Profile, Single Row, Bottom Entry .280 [7.11] * Receptacle with Round Wire
page 177 Crimp High Pressure Contact
Catalog 82007 Double Row .282 [7.16] .323 [8.20]
AMPMODU Mod IV Vertical
Board Mount Receptacle, Low
Profile, Double Row, Top Entry .183 [4.65] .255 [6.48] Flexible Flat Conductor Cable Single Row .210 [5.33] .323 [8.20]
pages 179, 180 Receptacle with Multiple Wire
Crimp High Pressure Contact
AMPMODU Surface-Mount Receptacle, Top Entry .183 [4.65] * Catalog 82007 Double Row .225 [5.72] .323 [8.20]
Vertical Board Mount,
Single Row, Dual Entrypage 187, 188 Bottom Entry .204 [5.18] * Flexible Flat Conductor Cable Single Row .267 [6.78] .323 [8.20]
AMPMODU Mod IV Vertical Receptacle with Round Wire
Board Mount Receptacle, Low Top Entry .183 [4.65] * Crimp Standard Pressure
ContactCatalog 82007 Double Row .282 [7.16] .323 [8.20]
Profile, Double Row, Dual Entry Bottom Entry .204 [5.18] *
page 182 Flexible Flat Conductor Cable Single Row .220 [5.59] .323 [8.20]
AMPMODU Surface-Mount Receptacle, Top Entry .183 [4.65] * Receptacle with Multiple Crimp
Vertical Board Mount, Double Row, Standard Pressure Contact
Catalog 82007 Double Row .235 [5.97] .323 [8.20]
Dual Entrypage 189-192 Bottom Entry .204 [5.18] *
AMPMODU .600 [15.24] Mod IV *Maximum post length is determined by customers application; (i.e., available
Housing with Standard Pressure Contacts .210 [5.33] .283 [7.19] space beyond rear of horizontal receptacle assembly, or above bottom entry ver-
pages 211-220 tical receptacle assembly or below vertical receptacle assemblies used in pass
AMPMODU .600 [15.24] Mod IV through applications).
Housing with Intermediate Pressure Contacts .205 [5.21] .283 [7.19]
pages 211-220
AMPMODU .600 [15.24] Mod IV
Housing with High Pressure Contacts .185 [4.70] .283 [7.19]
pages 211-220
AMPMODU Mod IV Vertical
Board Mount Receptacle, Low Top Entry .183 [4.65] *
Profile, Single Row, Dual Entry Bottom Entry .204 [5.18] *
page 181

90
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Parallel Stacking Guide for Board-to-Board Applications

See Dimension Product Family


Figure Between Headers Single-Row Double-Row Product Family Single-Row Double-Row
Below PC Boards (See Note 1.) (Page Ref.) (Page Ref.) Receptacles (Page Ref.) (Page Ref.)
177, 181, 182-184,
.060 [1.52] Bandolier Posts 163 NA Dual Entry, Mod IV 187, 188 189-192
Breakaway** 177, 181, 182-184,
1 .090 [2.29] 102** 104** Dual Entry, Mod IV
(Unshrouded) 187, 188 189-192
.153 [3.89] Surface Mount** 177, 181, 182-184,
Breakaway (Unshrouded) NA 110 Dual Entry, Mod IV 187, 188 189-192
.265 [6.73] Bandolier Posts 163 137** Top Entry, Mod IV 178, 181 179, 180,
187, 188 182-184, 189-192
2 Breakaway** 178, 181 179, 180,
.355 [9.02] (Unshrouded) 102** 104** Top Entry, Mod IV 187, 188 182-184, 189-192

.385 [9.78] Low Profile Shrouded NA 135, 137** Top Entry, Mod IV NA 179,180
Surface Mount** Surface Mount**, Mod IV,
3 .418 [1.06] 109 110 187, 188 189-192
Breakaway (Unshrouded) Top Entry
2* Breakaway**
.430 [10.92] (Unshrouded) 102** 104** Top Entry, Mod II 175 176

4* .440 [11.18] Shrouded, Mod II 115, 116 117, 119 Top Entry, Mod II or Mod IV 175, 178 176, 179, 180
Stacking Shroud Inner Board Receptacle
.528 [13.41] (See Note 2.) NA 156 (Hood) (See Note 2.) NA 157
Stacking Shroud Outer Board Receptacle
.547 [13.89] (See Note 2.) NA 160 (See Note 2.) NA 158

4 Two-Piece Header Two-Piece Receptacle**


.550 [13.97] Connector System NA 198, 199 Connector System NA 196**
Stacking Shroud Inner Board Receptacle
.748 [19.00] NA 156 (Hood) NA 157
(See Note 2.) (See Note 2.)
Stacking Shroud Outer Board Receptacle
.768 [19.51] NA 161 NA 158

Parallel Stacking
(See Note 2.) (See Note 2.)
Mod II/IV Receptacles,
Various Stacking Unshrouded 112 113 Various Various
Top/Bottom Entry

Guide
**High temperature version available, see page ref. listed.
Notes: 1. Headers listed are standard thru-hole versions. Many headers are available with retention feature and ACTION PIN posts. See product
Notes: 1. specification pages in individual sections for option availability.
Notes: 2. These headers and receptacles are Related Board-to-Board products. They are not part of the AMPMODU .025 [0.64] Square Product Family.

Board-to-Board
5
Stacking Heights
(By Receptacle/Header
Combination)
Receptacle Assembly
Receptacle Assembly Receptacle Assembly

.265
[6.73] .265
.265*
.355 [6.73] .550*
[6.73] .418
[9.02] [13.97]
[10.62]

.090
[2.29] .090 .153
Header Header
[2.29] [3.89]
Header

Figure 1 Figure 2 Figure 3 Figure 4


Double-Row, Mod IV, Double-Row, Mod IV, Double-Row, Mod IV, Double-Row, Two-Piece
Bottom Entry, Breakaway Header Top Entry, Breakaway Header Surface-Mount, Top Entry, Receptacle and Two-Piece
*Mod II Receptacle Height Receptacle and Surface-Mount Shrouded Header
is .340 [8.64] for a total Breakaway Header *Mod II Shrouded Header Height
stack height of .430 [10.92] is .440 [11.18] for a total
stack height of .440 [11.18]

91
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Standard HeadersUnshrouded

Product Facts
Variety of popular sizes
available
Substantial time/labor
savingsinstall all posts
at one time
Vertical and right-angle
versions available in
single- and double-row
configurations
Triple-row version available
in vertical configuration
with .230 [5.84] mating
length
Copper alloy posts
Choice of select gold or
tin plated posts
Mating length for single and
double row is .318 [8.08]
(.278 [7.06] effective mat-
ing length-see page 90)
Flame retardant, black
Unshrouded Headers

thermoplastic housings;
94V-0 rated
Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
Performance
Characteristics
R

File No. E28476


Certified by Canadian Electrical
Standards Insulation Resistance 5,000

5 Association,
File No. LR 7189
R
megohms minimum initial
Dielectric Withstanding Voltage
750 V rms at sea level

Environmental
Operating Temperature
-65C to +105C (black thermoplastic
housings)
Current 3 amperes maximum
per contact (dependent upon mating
connector)

92
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Standard HeadersUnshrouded, Single Row, .100 [2.54] Centerline

.025 [0.64] Square A


.200
[5.08]
Ref.
.100
Straight Post [2.54]
Typ. (Contact Area)

.318
[8.08]

.090
.046/.038 [2.29]
[1.17/0.97]
.125
[3.18]

.042 .050
[1.07] B Max. Typ.
[1.27]
Typ.
Material and Finish B
.035.003
Housing Black thermoplastic, .100*
[0.890.08]
Dia.Typ.
[2.54]
94V-0 rated
Posts Copper alloy, plated as fol-
lows:
Recommended PC Board Hole Layout
Plating A Selectively plated (for .055 [1.40] min. thick PC board)
.000030 [0.00076] gold on contact area, *.003 [0.08] tolerances not to accumulate
with gold flash over .000050 [0.00127] within one connector pattern.
nickel on entire post
Plating B Selectively plated No. of Dimensions Post Plating/Part Nos.
.000015 [0.00038] gold on contact area, Pos. A B Plating A Plating B
with gold flash over .000050 [0.00127] 1 .084 [2.13] 87220-1 87224-1
nickel on entire post 2 .184 [4.67] .100 [2.54] 87220-2 87224-2

Unshrouded Headers
Tin/Nickel Plating option available; 3 .284 [7.21] .200 [5.08] 87220-3 87224-3
minimum order quantities may apply. 4 .384 [9.75] .300 [7.62] 87220-4 87224-4
Consult TE. 5 .484 [12.29] .400 [10.16] 87220-5 87224-5
6 .584 [14.83] .500 [12.70] 87220-6 87224-6
7 .684 [17.37] .600 [15.24] 87220-7 87224-7
Related Product Data
8 .784 [19.91] .700 [17.78] 87220-8 87224-8
Mateable Connectors 9 .884 [22.45] .800 [20.32] 87220-9 87224-9
Refer to the Mating Post Selection
10 .984 [24.99] .900 [22.86] 1-87220-0 1-87224-0
Guide page 90
11 1.084 [27.53] 1.000 [25.40] 1-87220-1 1-87224-1
12 1.184 [30.07] 1.100 [27.94] 1-87220-2 1-87224-2
Technical Documents page 276
See mating connector for applicable
product and application specifications.
13
14
15
16
1.284 [32.61]
1.384 [35.15]
1.484 [37.69]
1.584 [40.23]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1-87220-3
1-87220-4
1-87220-5
1-87220-6
1-87224-3
1-87224-4
1-87224-5
1-87224-6
5
17 1.684 [42.77] 1.600 [40.64] 1-87220-7 1-87224-7
18 1.784 [45.31] 1.700 [43.18] 1-87220-8 1-87224-8
19 1.884 [47.85] 1.800 [45.72] 1-87220-9 1-87224-9
20 1.984 [50.39] 1.900 [48.26] 2-87220-0 2-87224-0
21 2.084 [52.93] 2.000 [50.80] 2-87220-1 2-87224-1
22 2.184 [55.47] 2.100 [53.34] 2-87220-2 2-87224-2
23 2.284 [58.01] 2.200 [55.88] 2-87220-3 2-87224-3
24 2.384 [60.55] 2.300 [58.42] 2-87220-4 2-87224-4
25 2.484 [63.09] 2.400 [60.96] 2-87220-5 2-87224-5
26 2.584 [65.63] 2.500 [63.50] 2-87220-6 2-87224-6
27 2.684 [68.17] 2.600 [66.04] 2-87220-7 2-87224-7
28 2.784 [70.71] 2.700 [68.58] 2-87220-8 2-87224-8
29 2.884 [73.25] 2.800 [71.12] 2-87220-9 2-87224-9
30 2.984 [75.79] 2.900 [73.66] 3-87220-0 3-87224-0
31 3.084 [78.33] 3.000 [76.20] 3-87220-1 3-87224-1
32 3.184 [80.87] 3.100 [78.74] 3-87220-2 3-87224-2
33 3.284 [83.41] 3.200 [81.28] 3-87220-3 3-87224-3
34 3.384 [85.95] 3.300 [83.82] 3-87220-4 3-87224-4
35 3.484 [88.49] 3.400 [86.36] 3-87220-5 3-87224-5
36 3.584 [91.03] 3.500 [88.90] 3-87220-6 3-87224-6
37 3.684 [93.57] 3.600 [91.44] 3-87220-7 3-87224-7
38 3.784 [96.11] 3.700 [93.98] 3-87220-8 3-87224-8
Note: All part numbers are RoHS 39 3.884 [98.65] 3.800 [96.52] 3-87220-9 3-87224-9
compliant. 40 3.984 [101.19] 3.900 [99.06] 4-87220-0 4-87224-0

93
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Standard HeadersUnshrouded, Single Row, .100 [2.54] Centerline (Continued)

.025 [0.64] Square .139


[3.53]
Right-Angle Post Ref.

.025
[0.64]
Typ.
Material and Finish A .040
[1.02]
Housing Black thermoplastic, .200 [5.08] Ref.
.042
94V-0 rated [1.07]
.069 Contact Area
B [1.75]
Posts Copper alloy, plated as follows: Typ. Typ.
Plating A Selectively plated .069
.000030 [0.00076] gold on contact area, [1.75]
.025
with gold flash over .000050 [0.00127] [0.64]
nickel on entire post
Plating B Selectively plated
.000015 [0.00038] gold on contact area, .138 .100
[3.51] [2.54]
with gold flash over .000050 [0.00127] Ref. .110
nickel on entire post [2.79] .157
.318
Tin/Nickel Plating option available; Ref. [8.08] [3.99]
Unshrouded Headers

minimum order quantities may apply. Ref.


Consult TE. .025.001
Typ. .025.002
[0.630.03] Typ.
[0.630.05]

Related Product Data


B
Mateable Connectors Refer .100*
[2.54] .035.003
to the Mating Post Selection Guide Typ. [0.890.08]
Dia. Typ.
page 90

Recommended PC Board Hole Layout


Technical Documents page 276 (for .055 [1.40] min. thick PC board)

5 See mating connector for applicable


product and application specifications.
*.003 [0.08] tolerances not to accumulate
within one connector pattern.

Dimensions Post Plating/Part Nos.


No. of
Pos. A B Plating A Plating B
1 .084 [2.13] 87232-1 87233-1
2 .184 [4.67] .100 [2.54] 87232-2 87233-2
3 .284 [7.21] .200 [5.08] 87232-3 87233-3
4 .384 [9.75] .300 [7.62] 87232-4 87233-4
5 .484 [12.29] .400 [10.16] 87232-5 87233-5
6 .584 [14.83] .500 [12.70] 87232-6 87233-6
7 .684 [17.37] .600 [15.24] 87232-7 87233-7
8 .784 [19.91] .700 [17.78] 87232-8 87233-8
9 .884 [22.45] .800 [20.32] 87232-9 87233-9
10 .984 [24.99] .900 [22.86] 1-87232-0 1-87233-0
11 1.084 [27.53] 1.000 [25.40] 1-87232-1 1-87233-1
12 1.184 [30.07] 1.100 [27.94] 1-87232-2 1-87233-2
13 1.284 [32.61] 1.200 [30.48] 1-87232-3 1-87233-3
14 1.384 [35.15] 1.300 [33.02] 1-87232-4 1-87233-4
15 1.484 [37.69] 1.400 [35.56] 1-87232-5 1-87233-5
16 1.584 [40.23] 1.500 [38.10] 1-87232-6 1-87233-6
17 1.684 [42.77] 1.600 [40.64] 1-87232-7 1-87233-7
18 1.784 [45.31] 1.700 [43.18] 1-87232-8 1-87233-8
19 1.884 [47.85] 1.800 [45.72] 1-87232-9 1-87233-9
20 1.984 [50.39] 1.900 [48.26] 2-87232-0 2-87233-0

Note: All part numbers are RoHS compliant.


94
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Standard HeadersUnshrouded, Single Row, .100 [2.54] Centerline (Continued)

No. of Dimensions Post Plating/Part Nos.


Pos. A B Plating A Plating B
21 2.084 [52.93] 2.000 [50.80] 2-87232-1 2-87233-1
22 2.184 [55.47] 2.100 [53.34] 2-87232-2 2-87233-2
23 2.284 [58.01] 2.200 [55.88] 2-87232-3 2-87233-3
24 2.384 [60.55 2.300 [58.42] 2-87232-4 2-87233-4
25 2.484 [63.09] 2.400 [60.96] 2-87232-5 2-87233-5
26 2.584 [65.63] 2.500 [63.50] 2-87232-6 2-87233-6
27 2.684 [68.17] 2.600 [66.04] 2-87232-7 2-87233-7
28 2.784 [70.71] 2.700 [68.58] 2-87232-8 2-87233-8
29 2.884 [73.25] 2.800 [71.12] 2-87232-9 2-87233-9
30 2.984 [75.79] 2.900 [73.66] 3-87232-0 3-87233-0
31 3.084 [78.33] 3.000 [76.20] 3-87232-1 3-87233-1
32 3.184 [80.87] 3.100 [78.74] 3-87232-2 3-87233-2
33 3.284 [83.41] 3.200 [81.28] 3-87232-3 3-87233-3
34 3.385 [85.95] 3.300 [83.82] 3-87232-4 3-87233-4
35 3.484 [88.49] 3.400 [86.36] 3-87232-5 3-87233-5
36 3.584 [91.03] 3.500 [88.90] 3-87232-6 3-87233-6
37 3.684 [93.57] 3.600 [91.44] 3-87232-7 3-87233-7
38 3.784 [96.11] 3.700 [93.98] 3-87232-8 3-87233-8
39 3.884 [98.65] 3.800 [96.52] 3-87232-9 3-87233-9
40 3.984 [101.19] 3.900 [99.06] 4-87232-0 4-87233-0

Unshrouded Headers
5

Note: All part numbers are RoHS compliant.


95
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Standard HeadersUnshrouded, Double-Row,


.100 x .100 [2.54 x 2.54] Centerline
.025 [0.64] Square .100
Straight Post .200
Ref.
[2.54]
[5.08]
A (Contact Area)
.100
Typ.
[2.54]

.318
[8.08]

.090
[2.29]
.046/.038 .125
[1.17/0.97] [3.18]
.042
Material and Finish [1.07] B .050
Max. Typ.
Typ. [1.27]
Housing Black thermoplastic,
94V-0 rated
Posts Copper alloy, plated as follows:
Plating A Selectively plated
.000030 [0.00076] gold on contact area,
with gold flash over .000050 [0.00127] B
.100*
nickel on entire post [2.54]
Plating B Selectively plated
.000015 [0.00038] gold on contact area,
with gold flash over .000050 [0.00127]
Unshrouded Headers

nickel on entire post


Tin/Nickel Plating option available; .100*
[2.54] .035.003
minimum order quantities may apply. Dia. Typ.
[0.890.08]
Consult TE.

Recommended PC Board Hole Layout


Related Product Data (for .055 [1.40] min. thick PC board)

Mateable Connectors *.003 [0.08] tolerances not to accumulate


Refer to the Mating Post Selection within one connector pattern.
Guide page 90

5 Accessories
Barrier Insert page 204
No. of
Pos. A
Dimensions
B
Post Plating/Part Nos.
Plating A Plating B
2 .084 [2.13] 1-87215-0 87227-1
4 .184 [4.67] .100 [2.54] 1-87215-1 87227-2
Technical Documents page 276 6 .284 [7.21] .200 [5.08] 1-87215-2 87227-3
See mating connector for applicable 8 .384 [9.75] .300 [7.62] 87215-1 87227-4
product and application specifications. 10 .484 [12.29] .400 [10.16] 87215-2 87227-5
12 .584 [14.83] .500 [12.70] 87215-3 87227-6
14 .684 [17.37] .600 [15.24] 87215-4 87227-7
16 .784 [19.91] .700 [17.78] 87215-5 87227-8
18 .884 [22.45] .800 [20.32] 87215-6 87227-9
20 .984 [24.99] .900 [22.86] 87215-7 1-87227-0
22 1.084 [27.53] 1.000 [25.40] 1-87215-3 1-87227-1
24 1.184 [30.07] 1.100 [27.94] 87215-8 1-87227-2
26 1.284 [32.61] 1.200 [30.48] 87215-9 1-87227-3
28 1.384 [35.15] 1.300 [33.02] 1-87215-4 1-87227-4
30 1.484 [37.69] 1.400 [35.56] 1-87215-5 1-87227-5
32 1.584 [40.23] 1.500 [38.10] 1-87215-6 1-87227-6
34 1.684 [42.77] 1.600 [40.64] 1-87215-7 1-87227-7
36 1.784 [45.31] 1.700 [43.18] 1-87215-8 1-87227-8
38 1.884 [47.85] 1.800 [45.72] 1-87215-9 1-87227-9
40 1.984 [50.39] 1.900 [48.26] 2-87215-0 2-87227-0

Note: All part numbers are RoHS compliant.


96
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Standard HeadersUnshrouded, Double-Row,


.100 x .100 [2.54 x 2.54] Centerline (Continued)

No. of Dimensions Post Plating/Part Nos.


Pos. A B Plating A Plating B
42 2.084 [52.93] 2.000 [50.80] 2-87215-1 2-87227-1
44 2.184 [55.47] 2.100 [53.34] 2-87215-2 2-87227-2
46 2.284 [58.01] 2.200 [55.88] 2-87215-3 2-87227-3
48 2.384 [60.55] 2.300 [58.42] 2-87215-4 2-87227-4
50 2.484 [63.09] 2.400 [60.96] 2-87215-5 2-87227-5
52 2.584 [65.63] 2.500 [63.50] 2-87215-6 2-87227-6
54 2.684 [68.17] 2.600 [66.04] 2-87215-7 2-87227-7
56 2.784 [70.71] 2.700 [68.58] 2-87215-8 2-87227-8
58 2.884 [73.25] 2.800 [71.12] 2-87215-9 2-87227-9
60 2.984 [75.79] 2.900 [73.66] 3-87215-0 3-87227-0
62 3.084 [78.33] 3.000 [76.20] 3-87215-1 3-87227-1
64 3.184 [80.87] 3.100 [78.74] 3-87215-2 3-87227-2
66 3.284 [83.41] 3.200 [81.28] 3-87215-3 3-87227-3
68 3.384 [85.95] 3.300 [83.82] 3-87215-4 3-87227-4
70 3.484 [88.49] 3.400 [86.36] 3-87215-5 3-87227-5
72 3.584 [91.03] 3.500 [88.90] 3-87215-6 3-87227-6
74 3.684 [93.57] 3.600 [91.44] 3-87215-7 3-87227-7
76 3.784 [96.11] 3.700 [93.98] 3-87215-8 3-87227-8
78 3.884 [98.65] 3.800 [96.52] 3-87215-9 3-87227-9
80 3.984 [101.19] 3.900 [99.06] 4-87215-0 4-87227-0

Unshrouded Headers
5

Note: All part numbers are RoHS compliant.


97
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Standard HeadersUnshrouded, Double-Row,


.100 x .100 [2.54 x 2.54] Centerline (Continued)
.025 [0.64] Square .200
[5.08]
Ref.
Right-Angle Post (Contact Area) .289
A
[7.34]
.042
.042
[1.07]
.100 [1.07]
Typ.
[2.54]

.110
[2.79]

.318
[8.08]
.069
.100 [1.75] .157 .100
[2.54] [3.99] [2.54]
Material and Finish Typ.
B
Housing Black thermoplastic,
94V-0 rated
Posts Copper alloy, plated as follows:
Plating A Selectively plated
.000030 [0.00076] gold on contact area, B
with gold flash over .000050 [0.00127] .100*
nickel on entire post [2.54]

Plating B Selectively plated


.000015 [0.00038] gold on contact area,
with gold flash over .000050 [0.00127]
nickel on entire post
Unshrouded Headers

.035.003
.100* Dia. Typ.
[0.890.08]
Tin/Nickel Plating option available; [2.54]
minimum order quantities may apply.
Consult TE. Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)

Related Product Data *.003 [0.08] tolerances not to accumulate


within one connector pattern.
Mateable Connectors
Refer to the Mating Post Selection
Guide page 90

5 Technical Documents page 276


See mating connector for applicable No. of Dimensions Post Plating/Part Nos.
product and application specifications. Pos. A B Plating A Plating B
2 .084 [2.13] 1-86479-3 87230-1
4 .184 [4.67] .100 [2.54] 1-86479-4 87230-2
6 .284 [7.21] .200 [5.08] 1-86479-5 87230-3
8 .384 [9.75] .300 [7.62] 1-86479-6 87230-4
10 .484 [12.29] .400 [10.16] 86479-3 87230-5
12 .584 [14.83] .500 [12.70] 86479-4 87230-6
14 .684 [17.37] .600 [15.24] 86479-5 87230-7
16 .784 [19.91] .700 [17.78] 86479-2 87230-8
18 .884 [22.45] .800 [20.32] 86479-6 87230-9
20 .984 [24.99] .900 [22.86] 86479-1 1-87230-0
22 1.084 [27.53] 1.000 [25.40] 1-86479-7 1-87230-1
24 1.184 [30.07] 1.100 [27.94] 86479-7 1-87230-2
26 1.284 [32.61] 1.200 [30.48] 1-86479-0 1-87230-3
28 1.384 [35.15] 1.300 [33.02] 1-86479-8 1-87230-4
30 1.484 [37.69] 1.400 [35.56] 1-86479-9 1-87230-5
32 1.584 [40.23] 1.500 [38.10] 2-86479-0 1-87230-6
34 1.684 [42.77] 1.600 [40.64] 2-86479-1 1-87230-7
36 1.784 [45.31] 1.700 [43.18] 2-86479-2 1-87230-8
38 1.884 [47.85] 1.800 [45.72] 2-86479-3 1-87230-9
40 1.984 [50.39] 1.900 [48.26] 2-86479-4 2-87230-0

Note: All part numbers are RoHS compliant.


98
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Standard HeadersUnshrouded, Double-Row,


.100 x .100 [2.54 x 2.54] Centerline (Continued)

No. of Dimensions Post Plating/Part Nos.


Pos. A B Plating A Plating B
42 2.084 [52.93] 2.000 [50.80] 2-86479-5 2-87230-1
44 2.184 [55.47] 2.100 [53.34] 2-86479-6 2-87230-2
46 2.284 [58.01] 2.200 [55.88] 2-86479-7 2-87230-3
48 2.384 [60.55] 2.300 [58.42] 2-86479-8 2-87230-4
50 2.484 [63.09] 2.400 [60.96] 2-86479-9 2-87230-5
52 2.584 [65.63] 2.500 [63.50] 3-86479-0 2-87230-6
54 2.684 [68.17] 2.600 [66.04] 3-86479-1 2-87230-7
56 2.784 [70.71] 2.700 [68.58] 3-86479-2 2-87230-8
58 2.884 [73.25] 2.800 [71.12] 3-86479-3 2-87230-9
60 2.984 [75.79] 2.900 [73.66] 3-86479-4 3-87230-0
62 3.084 [78.33] 3.000 [76.20] 3-86479-5 3-87230-1
64 3.184 [80.87] 3.100 [78.74] 3-86479-6 3-87230-2
66 3.284 [83.41] 3.200 [81.28] 3-86479-7 3-87230-3
68 3.384 [85.95] 3.300 [83.82] 3-86479-8 3-87230-4
70 3.484 [88.49] 3.400 [86.36] 3-86479-9 3-87230-5
72 3.584 [91.03] 3.500 [88.90] 4-86479-0 3-87230-6
74 3.684 [93.57] 3.600 [91.44] 4-86479-1 3-87230-7
76 3.784 [96.11] 3.700 [93.98] 4-86479-2 3-87230-8
78 3.884 [98.65] 3.800 [96.52] 4-86479-3 3-87230-9
80 3.984 [101.19] 3.900 [99.06] 4-86479-4 4-87230-0

Unshrouded Headers
5

Note: All part numbers are RoHS compliant.


99
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Standard HeadersUnshrouded, Triple-Row, .100 [2.54] Centerline

.025 [0.64] Square A


Straight Post

.338
[8.59]

.100
[2.54]
B Typ.
.069
.042 [1.75]
Material and Finish [1.07] Typ.
Typ.
Housing Black thermoplastic,
94V-0 rated
.120
Posts Phosphor bronze, duplex [3.05]
.230
[5.84]
plated 000030 [0.00076] gold on
.185
contact area, .000100-.000200 [4.70]
Ref.
[0.00254-0.00508] tin on solder area, (Contact Area)
with entire post underplated .000050
[0.00127] nickel

.100 .120
Technical Documents page 276 [2.54] [3.05]
Typ.
See mating connector for applicable
Unshrouded Headers

product and application specifications. B .100*


.100* [2.54]
[2.54]

.035.003
Dia. Typ. .100*
[0.890.08]
[2.54]

5 Recommended PC Board Hole Layout


(for .055 [1.40] min. thick PC board)
*.003 [0.08] tolerances not to accumulate
within one connector pattern.

No. of Dimensions
Part Nos.
Pos. A B
9 .284 [7.21] .200 [5.08] 5-103817-1
12 .384 [9.75] .300 [7.62] 5-103817-2
15 .484 [12.29] .400 [10.16] 5-103817-3
18 .584 [14.83] .500 [12.70] 5-103817-4
21 .684 [17.37] .600 [15.24] 5-103817-5
24 .784 [19.91] .700 [17.78] 5-103817-6
27 .884 [22.45] .800 [20.32] 5-103817-7
30 .984 [24.99] .900 [22.86] 5-103817-8
33 1.084 [27.53] 1.000 [25.40] 5-103817-9
42 1.384 [35.15] 1.300 [33.02] 6-103817-2
45 1.484 [37.69] 1.400 [35.56] 6-103817-3
60 1.984 [50.39] 1.900 [48.26] 6-103817-8
69 2.284 [58.01] 2.200 [55.88] 7-103817-1
72 2.384 [60.55] 2.300 [58.42] 7-103817-2
96 3.184 [80.87] 3.100 [78.74] 8-103817-0
120 3.984 [101.19] 3.900 [99.06] 8-103817-8

Note: All part numbers are RoHS compliant.


100
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Breakaway and Retention HeadersUnshrouded

Product Facts
Design and inventory
versatilityheaders can be
broken into any size needed
Variety of popular sizes
available
Substantial time/labor
savings can install all posts
at one time
Vertical and right-angle
versions available in
single- and double-row
configurations
Phosphor bronze posts
Choice of gold duplex or
tin plated posts
Post lengths include .230
[5.84] and .318 [8.08] for
connector mating
Board retention feature
available

Breakaway and Retention


HeadersUnshrouded
Black, glass-filled
thermoplastic housings;
high temperature
compatible
Recognized under the Performance
Component Program of Characteristics
Underwriters
Electrical
Laboratories Inc.,
File No. E28476
R
Insulation Resistance 5,000
megohms minimum initial

5
Certified by Canadian Dielectric Withstanding Voltage
Standards 750 V rms at sea level
Association, R

File No. LR 7189


Environmental
Operating Temperature
-65C to +105C (black thermoplastic
housings)
Current 3 amperes maximum
per contact (dependent upon mating
receptacle)

101
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Breakaway HeadersUnshrouded, Single-Row, .100 [2.54] Centerline

.025 [0.64] Square Headers with Solder Tails


A
Straight Posts
B

E Ref.
.025 (Contact Area)
D
[0.64]
Typ.
.090
[2.29]

C
.045
Material and Finish B
[1.14]
.035.003 Typ.
Housing Black thermoplastic, 94V-0 Dia. Typ. .100*
[0.890.08] [2.54]
rated, high temperature compatible (Plated)
Recommended Hole Size
Posts Phosphor bronze, plated as Before Plating
follows: .045.001
Dia. Typ.
[1.140.02]
Plating A Duplex plated .000030 .090.002
[0.00076] gold on contact area, .000100- .030.002 [2.290.05]
.000200 [0.00254-0.00508] tin on solder [0.760.05]
tail, with entire post underplated .000050 Recommended PC Board Mounting Pattern
[0.00127] nickel (for .062 [1.57] thick PC board; .008 [.203] thick stencil)
Plating B Duplex plated .000015 *.003 [0.08] tolerances not to accumulate within one connector pattern.
[0.00038] gold on contact area, .000100-
.000200 [0.00254-0.00508] tin on solder Headers with Board Retention Tails
Breakaway and Retention

tail, with entire post underplated .000050 A


Headers-Unshrouded

[0.00127] nickel B
Plating C .000100-.000200
[0.00254-0.00508] tin over .000050
[0.00127] nickel .025
E Ref.
D (Contact Area)
[0.64]
Typ.
Performance Characteristics
.090
(Board Retention Tails) [2.29]
Insertion Force 12 lb [53.4N] max. C
(see
Retention Force .25 lb [1.11N] min. note 3)

5 Related Product Data


Mateable Connectors
Refer to the Mating Post Selection
.040.003
[1.020.08]
(Plated)
.100*
Dia. Typ. [2.54]
B
.045
[1.14]
Typ.

.150.002
Recommended Hole Size
Guide page 90 Before Plating
[3.810.05]
.045.001
Dia. Typ. .030.002
[1.140.02]
Technical Documents page 276 [0.760.05]
See mating connector for applicable Recommended PC Board Mounting Pattern
product and application specifications. (for .062 [1.57] thick PC board; .008 [.203] thick stencil)
*.003 [0.08] tolerances not to accumulate within one connector pattern.

C = .090 [2.29] C = .120 [3.05] C = .125 [3.18]


D = .230 [5.84] D = .230 [5.84] D = .318 [8.08]
Header No. of Dimensions E = .185 [4.70] E = .185 [4.70] E = .200 [5.08]
Style Pos. A B Post Plating/Part Nos. Post Plating/Part Nos. Post Plating/Part Nos.
Plating A Plating B Plating C Plating A Plating B Plating C Plating A Plating B Plating C
With 1 .084 [2.13] 5-146285-1 5-146284-1 5-146282-1 5-146281-1 5-146280-1 5-146278-1 5-146277-1 5-146276-1 5-146274-1
Solder Tails
(See Notes
1 and 2.) 40 3.984 [101.19] 3.900 [99.06] 9-146285-0 9-146284-0 9-146282-0 9-146281-0 9-146280-0 9-146278-0 9-146277-0 9-146276-0 9-146274-0

With Board 3 .284 [7.21] .200 [5.08] 5-146297-3 5-146296-3 5-146294-3 5-146293-3 5-146292-3 5-146290-3 5-146289-3 5-146288-3 5-146286-3
Retention Tails
(See Notes
2 and 3.) 40 3.984 [101.19] 3.900 [99.06] 9-146297-0 9-146296-0 9-146294-0 9-146293-0 9-146292-0 9-146290-0 9-146289-0 9-146288-0 9-146286-0

Notes: 1. Headers without retention tails may be broken to the desired number of positions using Tool Kit No. 314818-1 (not shown).
2. Headers are also available in sizes 2 thru 39 positions (with Solder Tails) and 4 thru 39 positions (with Board Retention Tails). When ordering, add the prefix and/or suffix (dash)
numbers plus 5- -0 to the base part number that corresponds with the desired size. For example, the complete part number for an 8-position header with solder tails (C dimension
.090 [2.29], post plating A) would be 5-146285-8. The complete part number for a 26-position header with board retention tails (C dimension .120 [3.05], post plating B) would
be 7-146292-6. This part numbering system applies only to this page.
3. For C dimensions .120 [3.05] and .125 [3.18], board retention using kinked tails are for headers 6 positions and smaller; headers 7 positions and larger use swaged tails.
Headers with a C dimension of .090 [2.29] have swaged tails for all sizes.

Note: All part numbers are RoHS compliant.


102
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Breakaway HeadersUnshrouded, Single-Row,


.100 [2.54] Centerline (Continued)
.025 [0.64] Square Headers with Solder Tails
Right-Angle Posts
A
B
.100 D
Typ. .090
[2.54] [2.29]

.138
[3.51]

C
Material and Finish E Ref.
.042
Housing Black thermoplastic, 94V-0 [1.07]
(Contact
Area)
rated, high temperature compatible (2 Plc.) .045
[1.14] .140
Posts Phosphor bronze, duplex .100* Typ.
.035.003 [3.56]
plated .000030 [0.00076] gold on con- [0.890.08]
Dia. Typ. [2.54]
tact area, .000100-.000200 [0.00254- (Plated)
.090.002
0.00508] matte tin on solder tail, with Recommended Hole Size
[2.290.05]
Before Plating
entire post underplated .000050 .045.001
[0.00127] nickel Dia. Typ.
[1.140.02] .030.002
[0.760.05]

Performance Characteristics Recommended PC Board Mounting Pattern


(Board Retention Tails) (for .062 [1.57] thick PC board; .008 [.203] thick stencil)
*.003 [0.08] tolerances not to accumulate within one connector pattern.
Insertion Force 12 lb [53.4N] max.

Breakaway and Retention


Retention Force .25 lb [1.11N] min.

Headers-Unshrouded
Headers with Board Retention Tails
Related Product Data A
D
Mateable Connectors B .090
.100
Refer to the Mating Post Selection Typ. [2.29]
[2.54]
Guide page 90
.138
[3.51]
Technical Documents page 276
C
See mating connector for applicable

5
E Ref.
product and application specifications. (Contact
.042
Area)
[1.07]
(2 Plc.) .045 .140
[1.14] [3.56]
.100* Typ.
.040.003 [2.54]
Dia. Typ.
[1.020.08]
(Plated) .150.002
Recommended Hole Size [3.810.05]
Before Plating
.045.001
Dia. Typ. .030.002
[1.140.02]
[0.760.05]

Recommended PC Board Mounting Pattern


(for .062 [1.57] thick PC board; .008 [.203] thick stencil)
*.003 [0.08] tolerances not to accumulate within one connector pattern.
Board Retention
using Swaged Tails
C = .120 [3.05] C = .110 [2.79]
(All Header Sizes)
Header No. of Dimensions D = .230 [5.84] D = .318 [8.08]
Style Pos. A B E = .185 [4.70] E = .200 [5.08]
Part Nos. Part Nos.
With 1 5-146304-1 5-146305-1
.084 [2.13]
Solder Tails
(See Notes
1 and 2.) 40 3.984 [101.19] 3.900 [99.06] 9-146304-0 9-146305-0

With Board 3 .084 [2.13] 5-146306-3 5-146307-3


Retention Tails
(See Note 2.) 40 3.984 [101.19] 3.900 [99.06] 9-146306-0 9-146307-0

Notes: 1. Headers without retention tails may be broken to the desired number of positions using Tool Kit No. 314818-1 (not shown).
Notes: 2. Headers are also available in sizes 2 thru 39 positions (with Solder Tails) and 4 thru 39 positions (with Board Retention Tails).
When ordering, add the prefix and/or suffix (dash) numbers plus 5- -0 to the base part number that corresponds with the number
of positions. For example, the complete part number for an 8-position header with solder tails (C dimension .120 [3.05)] would be
5-146304-8. The complete part number for a 26-position header with board retention tails (C dimension .120 [3.05]) would be
7-146306-6. This part numbering system applies only to this page.

Note: All part numbers are RoHS compliant.


103
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Breakaway HeadersUnshrouded, Double-Row,


.100 x .100 [2.54 x 2.54] Centerline
.025 [0.64] Square Headers with Solder Tails .192
A
Straight Posts [4.88]
B

E Ref.
.025 D (Contact Area)
[0.64]
Typ.
.090
[2.29]

Material and Finish


.045
.100 .100* Ref.
Housing Black thermoplastic, 94V-0 [2.54]
[1.14]
[2.54] .100
rated, high temperature compatible ( CL of Hole Pattern) [2.54]
Posts Phosphor bronze, plated as .110
follows: [2.79]
Plating A Duplex plated .000030 ( CL of Stencil Pattern)
.035.003
[0.00076] gold on contact area, [0.890.08]
Dia. Typ.
.000100-.000200 [0.00254-0.00508] (Plated)
.090.002 .030.002
tin on solder tail, with entire post [0.760.05]
Recommended Hole Size
[2.290.05] Before Plating
underplated .000050 [0.00127] nickel
Recommended PC Board Mounting Pattern .045.001
Plating B Duplex plated .000015 Dia. Typ.
(for .062 [1.57] thick PC board; .008 [.203] thick stencil) [1.140.02]
[0.00038] gold on contact area, *.003 [0.08] tolerances not to accumulate within one connector pattern.
.000100-.000200 [0.00254-0.00508]
Breakaway and Retention
Headers-Unshrouded

tin on solder tail, with entire post Headers with Board Retention Tails
underplated .000050 [0.00127] nickel A
Plating C .000100-.000200 B
[0.00254-0.00508] tin over
.000050 [0.00127] nickel
E Ref.
.025 D (Contact Area)
[0.64]
Performance Characteristics Typ.
(Board Retention Tails) .090
Insertion Force 12 lb [53.4N] max. [2.29]

5 Retention Force .25 lb [1.11N] min.

Related Product Data


.100
[2.54]
( CL of Hole Pattern)
.100*
.075
[1.91]
Ref.
C

.192
[4.88]
Mateable Connectors [2.54]
Refer to the Mating Post Selection
Guide page 90 .170
[4.32]
C
( L of Stencil Pattern)
.040.003
Technical Documents page 276 [1.020.08]
Dia. Typ.
(Plated)
See mating connector for applicable .150.002 .030.002 Recommended Hole Size
product and application specifications. [3.810.05] [0.760.05] Before Plating
Recommended PC Board Mounting Pattern .045.001
Dia. Typ.
(for .062 [1.57] thick PC board; .008 [.203] thick stencil) [1.140.02]
*.003 [0.08] tolerances not to accumulate within one connector pattern.
C = .090 [2.29] C = .120 [3.05] C = .125 [3.18]
D = .230 [5.84] D = .230 [5.84] D = .318 [8.08]
Header No. of Dimensions E = .185 [4.70] E = .185 [4.70] E = .200 [5.08]
Style Pos. A B Post Plating/Part Nos. Post Plating/Part Nos. Post Plating/Part Nos.
Plating A Plating B Plating C Plating A Plating B Plating C Plating A Plating B Plating C
With 2 .084 [2.13] 5-146261-1 5-146260-1 5-146258-1 5-146257-1 5-146256-1 5-146254-1 5-146253-1 5-146252-1 5-146250-1
Solder Tails
(See Notes
1 and 2.) 80 3.984 [101.19] 3.900 [99.06] 9-146261-0 9-146260-0 9-146258-0 9-146257-0 9-146256-0 9-146254-0 9-146253-0 9-146252-0 9-146250-0

With Board 2 .084 [2.13] 5-146273-1 5-146272-1 5-146270-1 5-146269-1 5-146268-1 5-146266-1 5-146265-1 5-146264-1 5-146262-1
Retention Tails
(See Note 2.) 80 3.984 [101.19] 3.900 [99.06] 9-146273-0 9-146272-0 9-146270-0 9-146269-0 9-146268-0 9-146266-0 9-146265-0 9-146264-0 9-146262-0

Notes: 1. Headers without retention tails may be broken to the desired number of positions using Tool Kit No. 314818-1 (not shown).
2. Headers are also available in sizes 4 thru 78 positions. When ordering, add the prefix and/or suffix (dash) numbers plus 5- -0 to the base part number that corresponds with the
number of positions per row. For example, the complete part number for a 16-position header with solder tails (C dimension .090 [2.29], post plating A) would be 5-146261-8.
The complete part number for a 40-position header with board retention tails (C dimension .120 [3.05], post plating B) would be 7-146268-0. This part numbering system
applies only to this page.

Note: All part numbers are RoHS compliant.


104
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Breakaway HeadersUnshrouded, Double-Row,


.100 x .100 [2.54 x 2.54] Centerline (Continued)
.025 [0.64] Square Headers with Solder Tails
Right-Angle Posts A
.042
[1.07] B
(2 Plc.) .100 D
Typ. .090
[2.54]
[2.29]

.238 .100
[6.05] [2.54]

E Ref. C
Material and Finish (Contact
.045 Area)
Housing Black thermoplastic, 94V-0 [1.14]
.140
rated, high temperature compatible .100* [3.56]
Ref. .100
[2.54]
Posts Phosphor bronze, duplex [2.54]
plated .000030 [0.00076] gold on .110
[2.79]
contact area, .000100-.000200 .100
( CL of Stencil Pattern)
[2.54]
[0.00254-0.00508] tin on solder tail, .035.003
( CL of Hole Pattern) Dia. Typ.
with entire post underplated .000050 [0.890.08]
[0.00127] nickel .090.002
(Plated)
Recommended Hole Size
[2.290.05] .030.002
[0.760.05] Before Plating
.045.001
Dia. Typ.
Performance Characteristics Recommended PC Board Mounting Pattern [1.140.02]
(Board Retention Tails) (for .062 [1.57] thick PC board; .008 [.203] thick stencil)
Insertion Force 12 lb [53.4N] max. *.003 [0.08] tolerances not to accumulate within one connector pattern.

Breakaway and Retention


Headers-Unshrouded
Retention Force .25 lb [1.11N] min.
Headers with Board Retention Tails
Related Product Data .042
A

Mateable Connectors [1.07] B


(2 Plc.) D
Refer to the Mating Post Selection .090
Guide page 90 [2.29]

.238 .100
Technical Documents page 276 [6.05] [2.54]

See mating connector for applicable


product and application specifications.

.100*
.075
[1.91]
E Ref.
(Contact
Area)
.140
C
5
[2.54] Typ.
.170 [3.56]
[4.32]
.100 ( CL of Stencil Pattern) .100
[2.54] .040.003 [2.54]
( CL of Dia. Typ.
[1.020.08]
Hole (Plated)
Pattern) .150.002 .030.002 Recommended Hole Size
[3.810.05] [0.760.05] Before Plating
.045.001
Dia. Typ.
[1.140.02]
Recommended PC Board Mounting Pattern
(for .062 [1.57] thick PC board; .008 [.203] thick stencil)
*.003 [0.08] tolerances not to accumulate within one connector pattern.

C = .120 [3.05] C = .110 [2.79]


Header No. of Dimensions D = .230 [5.84] D = .318 [8.08]
Style Pos. A B E = .185 [4.70] E = .200 [5.08]
Part Nos. Part Nos. Board Retention
With using Swaged Tails
2 .084 [2.13] 5-146308-1 5-146309-1
Solder Tails (All Header Sizes)
(See Notes
1 and 2.) 80 3.984 [101.19] 3.900 [99.06] 9-146308-0 9-146309-0

With Board 2 .084 [2.13] 5-146310-1 5-146311-1


Retention Tails
(See Note 2.) 80 3.984 [101.19] 3.900 [99.06] 9-146310-0 9-146311-0

Notes: 1. Headers without retention tails may be broken to the desired number of positions using Tool Kit No. 314818-1 (not shown).
Notes: 2. Headers are also available in sizes 4 thru 78 positions. When ordering, add the prefix and/or suffix (dash) numbers plus 5- -0 to
the base part number that corresponds with the number of positions per row. For example, the complete part number for a 16-
position header with solder tails (C dimension .120 [3.05)] would be 5-146308-8. The complete part number for a 40-position header
with board retention tails (C dimension .120 [3.05]) would be 7-146310-0. This part numbering system applies only to this page.

Note: All part numbers are RoHS compliant.


105
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

AMPMODU Reeled Breakaway Headers

Features of Breakaway
Headers
Design and inventory
versatility headers can
easily be made into a variety
of sizes
High Temperature
Compatible
Reduced part number base
Reduced inventory burden

Applications
Desktops & workstations
Set-top boxes
Televisions
Automotive instrument
panels & radios
Medical and test equipment

Benefits
Reeled Breakaway Headers

Off the shelf availability


Various header length
capability using the same
reel TE now offers AMPMODU Reeled breakaway headers
reeled breakaway headers, can be purchased in single
Reduction of inventory costs
which are used for board- and double rows with tin,
Economy version of the to-board interconnections, 5 Au, 15 Au, and 30 Au
standard breakaway headers on a continuous reel. The duplex plating. The lower
reeled breakaway headers applied cost also offers
are an economy version of .230" and .318" mating

5 the standard breakaway


headers, and continue to
provide the same high
quality standards that
lengths. (See standard
breakaway-to-reeled header
conversion chart for vertical
headers on the reverse side
TE is known for in the of this sheet)
connector industry. Potential industries include:
Reeled breakaway headers computer peripherals,
provide the flexibility to cut telecommunications
the headers to many equipment, consumer,
different lengths, while only automotive, medical and
having to stock one part test equipment.
number. As a result, the Tooling available from:
amount of part numbers that Robo-Pak, Inc.
need to be purchased and 814 Lakeshore Drive
stored can be greatly East Bethel, MN 55902
reduced.
A pin retention and pin
removal tooling option is
also available in addition to
cutting.

106
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

AMPMODU Reeled Breakaway Headers (Continued)

Single Row
3.900
[99.06]

.092
[2.34]

.046.003
[1.170.08]
.025.001
Typ.
.100 [0.640.03]
[2.54]

.185 [4.70] .230(1)


(Contact Area) [5.84]

.100.003
[2.540.08]
.025.002 .110.015(1)
[0.640.05] [2.790.38]

Double Row
3.900

Reeled Breakaway Headers


[99.06]

.192
[4.88] .046.003
.100
[2.54] [1.170.08]

.025.001
.100 Typ.
[0.640.03]
[2.54]

.185 [4.70]

5
(Contact Area) .230(1)
[5.84]

.100.003
[2.540.08]
.025.002
[0.640.05] .110.015(1)
[2.790.38]

(1) See table for other mate and tail lengths.

Standard Breakaway-to-Reeled Header Conversion Chart (Vertical)


Double Row Headers Single Row Headers
Existing Make From Existing Make From Existing Make From Existing Make From
TE P/N Reeled P/N TE P/N Reeled P/N TE P/N Reeled P/N TE P/N Reeled P/N
Plating Mate: .318 Mate: .318 Mate: .230 Mate: .230 Mate: .318 Mate: .318 Mate: .230 Mate: .230
Options Tail: .125 Tail: .115 Tail: .120 Tail: .110 Tail: .125 Tail: .115 Tail: .120 Tail: .110
103322 103328 103321 103327
Tin 5-146853-1 5-146851-1 5-146852-1 5-146850-1
146250 146254 146274 146278
102973 103186 102972 103185
15 Au Duplex 5-146861-1 5-146859-1 5-146860-1 5-146858-1
146252 146256 146276 146280
102977 103240 102976 103239
30 Au Duplex 5-146871-1 5-146869-1 5-146870-1 5-146868-1
146253 146257 146277 146281
Note: Reeled Headers are a functional substitute for standard breakaways, however there are visual differences (i.e. housing appearance and bow due to reeling requirement).

Note: All part numbers are RoHS compliant.


107
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Breakaway Surface Mount Headers, .100 x .100 [2.54 x 2.54] Centerline

Product Facts
Surface Mount Leads
Contact Material:
phosphor bronze
High temperature, black
thermoplastic housings,
94V-0 rated, capable of
withstanding IR or vapor-
phase reflow
Recognized under the
Component Program of
Underwriters
Laboratories Inc. R

File No. E28476


Certified by Canadian
Standards
Association,
R

File No. LR 7189


Choice of gold duplex or tin
plated posts
Posts coplanar within .006
[0.15]
Breakaway Headers

Tape and reel packaging


Surface Mount

available in addition to
single tube packaging.
Contact TE.
Pick-and-place cap avail-
able for vacuum placement. An extension of the in single- and double-row Current packaging is in a
Contact TE. AMPMODU Breakaway vertical configurations with single tube but tape and
Header product family are mating lengths of .230 [5.84] reel is available for
the surface mount, vertical and .320 [8.13]. Posts are automatic pick-and-place.
breakaway headers. The offered with a choice of We also can provide a pick-

5 AMPMODU Surface Mount


breakaway headers
(Unshrouded) are available
either .000030 [.0007] gold
duplex or tin plating.
and-place cap for vacuum
placement if required.

108
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Breakaway Surface Mount HeadersUnshrouded


Single-Row, .100 [2.54] Centerline
.025 [0.64] Square A

Straight Post B

.100
.092 Typ.
[2.54]
[2.34]

D Ref.
Material and Finish (Contact Area) C
.090
Housing Black thermoplastic, 94V-0 .025 [2.29]
rated [0.63]
Posts Phosphor bronze, plated as
follows:
Plating A Duplex plated .000030 .042
[1.07]
[0.00076] gold on contact area, Typ.
.000100-.000200 [0.00254-0.00508] .100
Typ. .050
tin on solder area, with entire post [2.54] .050.003 .192 [1.27]
underplated .000050 [0.00127] nickel [1.270.08] [4.88]
Plating B .000100-.000200
[0.00254-0.00508] tin over .000050
[0.00127] nickel entire post

Breakaway Headers
Surface Mount
.105
[2.67]
Related Product Data .245
Mateable Receptacle [6.22]
.140.003
Refer to Mating Post Selection [3.560.08]
Guide page 90

Recommended Etched Circuit Layout


(Using .008 [0.20] thick stencil)
Technical Documents page 276
See mating connector for applicable
product and application specifications.
5
C = .230 [5.84] C = .320 [8.13]
No. of Dimensions D = .185 [4.70] D = .200 [5.08]
Pos. A B Post Plating/Part Nos. Post Plating/Part Nos.
Plating A Plating B Plating A Plating B
3 .284 [7.21] .200 [5.08] 5-146128-1 5-146132-1 5-146129-1 5-146133-1
4 .384 [9.75] .300 [7.62] 5-146128-2 5-146132-2 5-146129-2 5-146133-2
5 .484 [12.29] .400 [10.16] 5-146128-3 5-146132-3 5-146129-3 5-146133-3
6 .584 [14.83] .500 [12.70] 5-146128-4 5-146132-4 5-146129-4 5-146133-4
7 .684 [17.37] .600 [15.24] 5-146128-5 5-146132-5 5-146129-5 5-146133-5
8 .784 [19.91] .700 [17.78] 5-146128-6 5-146132-6 5-146129-6 5-146133-6
9 .884 [22.45] .800 [20.32] 5-146128-7 5-146132-7 5-146129-7 5-146133-7
10 .984 [24.99] .900 [22.86] 5-146128-8 5-146132-8 5-146129-8 5-146133-8
11 1.084 [27.53] 1.000 [25.40] 5-146128-9 5-146132-9 5-146129-9 5-146133-9
12 1.184 [30.07] 1.100 [27.94] 6-146128-0 6-146132-0 6-146129-0 6-146133-0
13 1.284 [32.61] 1.200 [30.48] 6-146128-1 6-146132-1 6-146129-1 6-146133-1
14 1.384 [35.15] 1.300 [33.02] 6-146128-2 6-146132-2 6-146129-2 6-146133-2
15 1.484 [37.69] 1.400 [35.56] 6-146128-3 6-146132-3 6-146129-3 6-146133-3

Note: All part numbers are RoHS compliant.


109
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Breakaway Surface Mount HeadersUnshrouded


Double-Row, .100 x .100 [2.54 x 2.54] Centerline
.025 [0.64] Square A

Straight Post B
.100
Typ.
[2.54]

.192
[4.88]

.100
[2.54]

Material and Finish D Ref.


(Contact Area)
C
Housing Black thermoplastic, 94V-0
rated
.025 .090
Posts Phosphor bronze, plated as [0.64] [2.29]
follows:
Plating A Duplex plated .000030
.042
[0.00076] gold on contact area, [1.07] .063
.000100-.000200 [0.00254-0.00508] Typ. .292 [1.60]
tin on solder area, with entire post [7.42]
B .050
underplated .000050 [0.00127] nickel .100 [1.27]
Typ.
Plating B .000100-.000200 [2.54]
.140.003
[0.00254-0.00508] tin over .000050 [3.560.08]
[0.00127] nickel entire post
Breakaway Headers
Surface Mount

.345 .205
Related Product Data [8.76] [5.21]
Mateable Receptacles
Refer to Mating Post Selection Guide
page 90
.065
[1.65]
.050.003
[1.270.08]
Recommended Etched Circuit Layout
(Using .008 [0.20] thick stencil)

5 C = .230 [5.84] C = .320 [8.13]


No. of Dimensions D = .185 [4.70] D = .200 [5.08]
Pos. A B Post Plating/Part Nos. Post Plating/Part Nos.
Plating A Plating B Plating A Plating B
4 .184 [4.67] .100 [2.54] 5-146130-1 5-146134-1 5-146131-1 5-146135-1
6 .284 [7.21] .200 [5.08] 5-146130-2 5-146134-2 5-146131-2 1-146135-6
8 .384 [9.75] .300 [7.62] 5-146130-3 5-146134-3 5-146131-3 5-146135-3
10 .484 [12.29] .400 [10.16] 5-146130-4 1-146134-7 5-146131-4 5-146135-4
12 .584 [14.83] .500 [12.70] 5-146130-5 5-146134-5 5-146131-5 5-146135-5
14 .684 [17.37] .600 [15.24] 5-146130-6 5-146134-6 5-146131-6 5-146135-6
16 .784 [19.91] .700 [17.78] 5-146130-7 1-146134-9 5-146131-7 5-146135-7
18 .884 [22.45] .800 [20.32] 5-146130-8 5-146134-8 5-146131-8 5-146135-8
20 .984 [24.99] .900 [22.86] 5-146130-9 5-146134-9 5-146131-9 5-146135-9
22 1.084 [27.53] 1.000 [25.40] 6-146130-0 6-146134-0 6-146131-0 6-146135-0
24 1.184 [30.07] 1.100 [27.94] 6-146130-1 6-146134-1 6-146131-1 6-146135-1
26 1.284 [32.61] 1.200 [30.48] 6-146130-2 6-146134-2 6-146131-2 6-146135-2
28 1.384 [35.15] 1.300 [33.02] 6-146130-3 6-146134-3 6-146131-3 6-146135-3
30 1.484 [37.69] 1.400 [35.56] 6-146130-4 2-146134-1 6-146131-4 6-146135-4

Note: All part numbers are RoHS compliant.


110
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Unshrouded Stacking HeadersBreakaway


.100 x .100 [2.54 x 2.54] Centerline
Product Facts
Available in single and
double row
Parallel PC board stacking
with numerous stack
heights available
Drawn wire posts allow
4 side mateability
May eliminate the need for
additional board spacers
Can be used in
conjunction with bottom
entry receptacles
Gold or tin plated
Up to 1.430 [36.32] overall
post length
Retention and surface
mount features available
upon request

Unshrouded Stacking Headers


Other header sizes can be
made upon request
Tape and reel packaging

Breakaway

available. Contact TE.


Pick-and-place cap avail-
able for vacuum placement.
Contact TE.

111
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Unshrouded Stacking Headers Breakaway,


Single-Row, .100 [2.54] Centerline
.025 [0.64] Square
Straight Posts
.092
[2.34] .046.003
[1.170.08]
Header Size
No. of Pos. x .100 [2.54]
.025.001
Typ.
[0.640.03]

A C
.090.003
[2.290.08]

Material and Finish


.042.008
Housing Black thermoplastic, D [1.070.20]
94V-0 rated 4 Places
Posts Phosphor bronze, plated as
follows:
Plating As noted in chart: .100.003
Typ.
Unshrouded Stacking Headers

[2.540.08]
Tin .000100-.000200 [0.00254- Tolerance Non-Cumulative
0.00508] tin over .000050 [0.00127]
nickel entire post
15Au .000015 [0.00038] gold over
Breakaway

.035.003 Dia. Typ.


.000050 [0.00127] nickel entire post [0.890.08]

Recommended PC Board Hole Layout


Related Product Data
Mateable Receptacles Base A B C D
Refer to the Mating Post Selection B End D End
Number Stack Tail Post Mating
Guide page 88 Plating Plating
(see note) Height Length Length Length
146455 .200 [5.08] .130 [3.30] .440 [11.17] .110 [2.79] TIN TIN

5 Technical Documents page 276


See mating connector for applicable
product and application specifications.
146456
146457
146458
146459
.250 [6.35]
.250 [6.35]
.300 [7.62]
.400 [10.16]
.080 [2.03]
.114 [2.89]
.123 [3.12]
.107 [2.71]
.440 [11.17]
.474 [12.03]
.533 [13.53]
.617 [15.67]
.110 [2.79]
.110 [2.79]
.110 [2.79]
.110 [2.79]
TIN
TIN
TIN
TIN
TIN
TIN
TIN
TIN
146460 .450 [11.43] .057 [1.45] .617 [15.67] .110 [2.79] TIN TIN
Retention and surface mount fea- 146461 .500 [12.70] .129 [3.27] .739 [18.77] .110 [2.79] TIN TIN
tures available upon request. 146462 .300 [7.62] .109 [2.77] .739 [18.77] .330 [8.38] TIN 15 AU
Other header sizes can be made 146463 .600 [15.24] .107 [2.71] .817 [20.75] .110 [2.79] TIN TIN
upon request. 146464 .400 [10.16] .087 [2.20] .817 [20.75] .330 [8.38] TIN 15 AU
146465 .700 [17.78] .120 [3.05] .930 [23.62] .110 [2.79] TIN TIN
146466 .500 [12.70] .100 [2.54] .930 [23.62] .330 [8.38] TIN 15 AU
146467 .270 [6.86] .330 [8.38] .930 [23.62] .330 [8.38] 15 AU 15 AU
146468 .800 [20.32] .120 [3.05] 1.030 [26.16] .110 [2.79] TIN TIN
146469 .600 [15.24] .100 [2.54] 1.030 [26.16] .330 [8.38] TIN 15 AU
146470 .370 [9.39] .330 [8.38] 1.030 [26.16] .330 [8.38] 15 AU 15 AU
146471 .900 [22.86] .120 [3.05] 1.130 [28.70] .110 [2.79] TIN TIN
146472 .700 [17.78] .100 [2.54] 1.130 [28.70] .330 [8.38] TIN 15 AU
146473 .470 [11.39] .330 [8.38] 1.130 [28.70] .330 [8.38] 15 AU 15 AU
146474 1.000 [25.40] .120 [3.05] 1.230 [31.24] .110 [2.79] TIN TIN
146475 .800 [20.32] .100 [2.54] 1.230 [31.24] .330 [8.38] TIN 15 AU
*Note: Headers are available in sizes 146476 .570 [14.47] .330 [8.38] 1.230 [31.24] .330 [8.38] 15 AU 15 AU
1 thru 40. When ordering, add the 146477 1.100 [27.94] .120 [3.05] 1.330 [33.78] .110 [2.79] TIN TIN
prefix and/or suffix (dash) numbers 146478 .900 [22.68] .100 [2.54] 1.330 [33.78] .330 [8.38] TIN 15 AU
plus 5- -0 to the base part number
that corresponds with the number of 146479 .670 [17.01] .330 [8.38] 1.330 [33.78] .330 [8.38] 15 AU 15 AU
positions per row. For example, the 146480 1.200 [30.48] .120 [3.05] 1.430 [36.32] .110 [2.79] TIN TIN
complete part number for an 8-position 146481 1.000 [25.40] .100 [2.54] 1.430 [36.32] .330 [8.38] TIN 15 AU
header is 5-146455-8. The complete 146482 .770 [19.55] .330 [8.38] 1.430 [36.32] .330 [8.38] 15 AU 15 AU
part number for a 16-position of the
same series would be 6-146455-6. Note: All part numbers are RoHS compliant.
112
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Unshrouded Stacking Headers Breakaway,


Double-Row, .100 x .100 [2.54 x 2.54] Centerline
.025 [0.64] Square
Straight Posts

.192
.046.003
[4.88]
Header Size [1.170.08] .100
No. of Pos. x .100 [2.54] [2.54]
.025.001
Typ.
[0.640.03]

A C
.090.003
[2.290.08]
Material and Finish
Housing Black thermoplastic,
.042.008
94V-0 rated D [1.070.20]
Posts Phosphor bronze, plated as 4 Places
follows:
Plating As noted in chart:
.100.003

Unshrouded Stacking Headers


Tin .000100-.000200 [0.00254- [2.540.08]
Typ.
0.00508] tin over .000050 [0.00127] Tolerance Non-Cumulative
nickel entire post
15Au .000015 [0.00038] gold over .100.003

Breakaway
[2.540.08]
.000050 [0.00127] nickel entire post
.035.003 Dia. Typ.
[0.890.08]
Related Product Data
Recommended PC Board Hole Layout
Mateable Connectors
Refer to the Mating Post Selection Base A B C D
B End D End
Guide page 90 Number Stack Tail Post Mating
Plating Plating
(see note) Height Length Length Length
146483 .200 [5.08] .130 [3.30] .440 [11.17] .110 [2.79] TIN TIN
Technical Documents page 276
See mating connector for applicable
product and application specifications.
146484
146485
146486
146487
.250 [6.35]
.250 [6.35]
.300 [7.62]
.400 [10.16]
.080 [2.03]
.114 [2.89]
.123 [3.12]
.107 [2.71]
.440 [11.17]
.474 [12.03]
.533 [13.53]
.617 [15.67]
.110 [2.79]
.110 [2.79]
.110 [2.79]
.110 [2.79]
TIN
TIN
TIN
TIN
TIN
TIN
TIN
TIN
5
146488 .450 [11.43] .057 [1.45] .617 [15.67] .110 [2.79] TIN TIN
Retention and surface mount 146489 .500 [12.70] .129 [3.27] .739 [18.77] .110 [2.79] TIN TIN
features available upon request.
Other header sizes can be made 146490 .300 [7.62] .109 [2.77] .739 [18.77] .330 [8.38] TIN 15 AU
upon request. 146491 .600 [15.24] .107 [2.71] .817 [20.75] .110 [2.79] TIN TIN
146492 .400 [10.16] .087 [2.20] .817 [20.75] .330 [8.38] TIN 15 AU
146493 .700 [17.78] .120 [3.05] .930 [23.62] .110 [2.79] TIN TIN
146494 .500 [12.70] .100 [2.54] .930 [23.62] .330 [8.38] TIN 15 AU
146495 .270 [6.86] .330 [8.38] .930 [23.62] .330 [8.38] 15 AU 15 AU
146496 .800 [20.32] .120 [3.05] 1.030 [26.16] .110 [2.79] TIN TIN
146497 .600 [15.24] .100 [2.54] 1.030 [26.16] .330 [8.38] TIN 15 AU
146498 .370 [9.39] .330 [8.38] 1.030 [26.16] .330 [8.38] 15 AU 15 AU
146499 .900 [22.86] .120 [3.05] 1.130 [28.70] .110 [2.79] TIN TIN
146500 .700 [17.78] .100 [2.54] 1.130 [28.70] .330 [8.38] TIN 15 AU
146501 .470 [11.93] .330 [8.38] 1.130 [28.70] .330 [8.38] 15 AU 15 AU
146502 1.000 [25.40] .120 [3.05] 1.230 [31.24] .110 [2.79] TIN TIN
146503 .800 [20.32] .100 [2.54] 1.230 [31.24] .330 [8.38] TIN 15 AU
*Note: Headers are available in sizes 146504 .570 [14.74] .330 [8.38] 1.230 [31.24] .330 [8.38] 15 AU 15 AU
2 thru 80. When ordering, add the 146505 1.100 [27.94] .120 [3.05] 1.330 [33.78] .110 [2.79] TIN TIN
prefix and/or suffix (dash) numbers
plus 5- -0 to the base part number 146506 .900 [22.68] .100 [2.54] 1.330 [33.78] .330 [8.38] TIN 15 AU
that corresponds with the number of 146507 .670 [17.01] .330 [8.38] 1.330 [33.78] .330 [8.38] 15 AU 15 AU
positions per row. For example, the 146508 1.200 [30.48] .120 [3.05] 1.430 [36.32] .110 [2.79] TIN TIN
complete part number for a 16-position 146509 1.000 [25.40] .100 [2.54] 1.430 [36.32] .330 [8.38] TIN 15 AU
header is 5-146283-8. The complete
part number for a 32-position of the 146510 .770 [19.55] .330 [8.38] 1.430 [36.32] .330 [8.38] 15 AU 15 AU
same series would be 6-146283-6.
Note: All part numbers are RoHS compliant.
113
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Standard Profile HeadersShrouded

Product Facts
Available in several styles
right-angle with three- and
four-sided pin protection,
and straight post with pin
protection and mounting ears
Post retention feature
available
Can be used for feed-to and
feed-thru applications
Housings are black
thermoplastic, flame
retardant 94V-0 rated
Contacts are copper alloy
Available in gold duplex,
gold over nickel and tin over
nickel platings
Headers with .066 [1.68]
and .150 [3.81] end dimen-
sions are available in select
Standard Profile Headers,

sizes up to 60 positions
Can be select loaded,
consult TE
Shrouded

Recognized under the


Component Program of
Underwriters
Laboratories Inc.
File No. E28476
R
Performance
Characteristics
Certified by Canadian
Standards Electrical

5 Association,
File No. LR 7189
R
Insulation Resistance 5,000
megohms minimum initial
Dielectric Withstanding Voltage
750 RMS at sea level

Environmental
Operating Temperature
-65C to +105C (black thermoplastic
housings)
Current 3 amperes maximum
per contact

114
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Standard Profile HeadersShrouded, Single-Row,


.100 [2.54] Centerline

.025 [0.64] Square


Straight Post (with Standoffs)

.549
[13.94]

.200
Ref.
[5.08]
A (Contact Area)

Material and Finish .110


[2.79] C .219
.134 Typ. [5.56]
Housing Black thermoplastic, [3.40] .100
Typ.
94V-0 rated [2.54]

Posts Phosphor bronze, plated as


.214
follows: [5.44]
Plating A Duplex plated .000030
[0.00076] gold on contact area, .013
.130
.000100-.000200 [0.00254-0.00508] tin .070 .240 [3.30]
[0.33]
[1.78] [6.10]
on solder area, with entire post under- (Standoffs)
Typ. .330
plated .000050 [0.00127] nickel .040
[8.38]
B [1.02]

Standard Profile Headers,


Plating B Duplex plated .000015 Typ.
[0.00038] gold on contact area,
C
.000100-.000200 [0.00254-0.00508] tin

Shrouded
on solder area, with entire post under- .100*
[2.54]
plated .000050 [0.00127] nickel Typ.
Plating C .000100-.000200
[0.00254-0.00508] tin over .000050
.035.003
[0.00127] nickel on entire post [0.890.08]
Dia. Typ.

Recommended PC Board Hole Layout


Related Product Data (for .055 [1.40] min. thick PC board)
Mateable Connectors
AMPMODU Wire-Applied
Receptacles page 215
AMPMODU MTE Receptacles
*.003 [0.08] tolerances not to accumulate
within one connector pattern.
5
pages 228, 229, 234 No. of Dimensions Post Plating/Part Nos.
Pos. A B C Plating A Plating B Plating C
3 .420 [10.67] .340 [8.64] .200 [5.08] 5-103414-1 8-102202-4 5-103080-1
Technical Documents page 276 4 .520 [13.21] .440 [11.18] .300 [7.62] 5-103414-2 5-102202-1 5-103080-2
See mating connector for applicable 5 .620 [15.75] .540 [13.72] .400 [10.16] 5-103414-3 5-102202-2 5-103080-3
product and application specifications. 6 .720 [18.29] .640 [16.26] .500 [12.70] 5-103414-4 5-102202-3 5-103080-4
7 .820 [20.83] .740 [18.80] .600 [15.24] 5-103414-5 5-102202-4 5-103080-5
8 .920 [23.37] .840 [21.34] .700 [17.78] 5-103414-6 5-102202-5 5-103080-6
9 1.020 [25.91] .940 [23.88] .800 [20.32] 5-103414-7 5-102202-6 5-103080-7
10 1.120 [28.45] 1.040 [26.42] .900 [22.86] 5-103414-8 5-102202-7 5-103080-8
11 1.220 [30.99] 1.140 [28.96] 1.000 [25.40] 5-103414-9 5-102202-8 5-103080-9
12 1.320 [33.53] 1.240 [31.50] 1.100 [27.94] 6-103414-0 5-102202-9 6-103080-0
13 1.420 [36.07] 1.340 [34.04] 1.200 [30.48] 6-103414-1 6-102202-0 6-103080-1
14 1.520 [38.61] 1.440 [36.58] 1.300 [33.02] 6-103414-2 6-102202-1 6-103080-2
15 1.620 [41.15] 1.540 [39.12] 1.400 [35.56] 6-103414-3 6-102202-2 6-103080-3
16 1.720 [43.69] 1.640 [41.66] 1.500 [38.10] 6-103414-4 6-102202-3 6-103080-4
17 1.820 [46.23] 1.740 [44.20] 1.600 [40.64] 6-103414-5 6-102202-4 6-103080-5
18 1.920 [48.77] 1.840 [46.74] 1.700 [43.18] 6-103414-6 6-102202-5 6-103080-6
19 2.020 [51.31] 1.940 [49.28] 1.800 [45.72] 6-103414-7 6-102202-6 6-103080-7
20 2.120 [53.85] 2.040 [51.82] 1.900 [48.26] 6-103414-8 6-102202-7 6-103080-8
21 2.220 [56.39] 2.140 [54.36] 2.000 [50.80] 6-103414-9 6-102202-8 6-103080-9
22 2.320 [58.93] 2.240 [56.90] 2.100 [53.34] 7-103414-0 6-102202-9 7-103080-0
23 2.420 [61.47] 2.340 [59.44] 2.200 [55.88] 7-103414-1 7-102202-0 7-103080-1
24 2.520 [64.01] 2.440 [61.98] 2.300 [58.42] 7-103414-2 7-102202-1 7-103080-2
25 2.620 [66.55] 2.540 [64.52] 2.400 [60.96] 7-103414-3 7-102202-2 7-103080-3

Note: All part numbers are RoHS compliant.


115
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Standard Profile HeadersShrouded, Single-Row,


.100 [2.54] Centerline (Continued)
.025 [0.64] Square
Right-Angle Post
(with Standoffs)
.549
[13.94]

A .240 .219
.134 C [6.10]
.200 [5.56]
[3.40] Ref.
.100 [5.08]
Typ.
[2.54] (Contact Area)
Material and Finish .110
.214 [2.79]
Housing Black thermoplastic, [5.44]
94V-0 rated
Posts Phosphor bronze, plated as .330
follows: .070 .013 [8.38]
[1.78] [0.33]
Plating A Duplex plated .000030 .151
Typ. (Standoffs)
B [3.84]
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
.040
tin on solder area, with entire post [1.02]
underplated .000050 [0.00127] nickel Typ.
Plating B Duplex plated .000015
Standard Profile Headers,

[0.00038] gold on contact area, .035.003 Dia. C


.000100-.000200 [0.00254-0.00508] [0.890.08]
tin on solder area, with entire post
Shrouded

underplated .000050 [0.00127] nickel .100*


Plating C .000100-.000200 [2.54] Recommended PC Board Hole Layout
Typ. (for .055 [1.40] min. thick PC board)
[0.00254-0.00508] tin over .000050
[0.00127] nickel on entire post *.003 [0.08] tolerances not to accumulate
within one connector pattern.

Related Product Data


Mateable Connectors

5 AMPMODU Wire-Applied
Receptacles page 215
AMPMODU MTE Receptacles
pages 228, 229, 234
No. of
Pos.
3
A
.420 [10.67]
Dimensions
B
.340 [8.64]
C
.200 [5.08]
Plating A
5-103361-1
Post Plating/Part Nos.
Plating B
8-102203-4
Plating C
5-102523-1
4 .520 [13.21] .440 [11.18] .300 [7.62] 5-103361-2 5-102203-1 5-102523-2
5 .620 [15.75] .540 [13.72] .400 [10.16] 5-103361-3 5-102203-2 5-102523-3
6 .720 [18.29] .640 [16.26] .500 [12.70] 5-103361-4 5-102203-3 5-102523-4
Technical Documents page 276 7 .820 [20.83] .740 [18.80] .600 [15.24] 5-103361-5 5-102203-4 5-102523-5
See mating connector for applicable 8 .920 [23.37] .840 [21.34] .700 [17.78] 5-103361-6 5-102203-5 5-102523-6
product and application specifications. 9 1.020 [25.91] .940 [23.88] .800 [20.32] 5-103361-7 5-102203-6 5-102523-7
10 1.120 [28.45] 1.040 [26.42] .900 [22.86] 5-103361-8 5-102203-7 5-102523-8
11 1.220 [30.99] 1.140 [28.96] 1.000 [25.40] 5-103361-9 5-102203-8 5-102523-9
12 1.320 [33.53] 1.240 [31.50] 1.100 [27.94] 6-103361-0 5-102203-9 6-102523-0
13 1.420 [36.07] 1.340 [34.04] 1.200 [30.48] 6-103361-1 6-102203-0 6-102523-1
14 1.520 [38.61] 1.440 [36.58] 1.300 [33.02] 6-103361-2 6-102203-1 6-102523-2
15 1.620 [41.15] 1.540 [39.12] 1.400 [35.56] 6-103361-3 6-102203-2 6-102523-3
16 1.720 [43.69] 1.640 [41.66] 1.500 [38.10] 6-103361-4 6-102203-3 6-102523-4
17 1.820 [46.23] 1.740 [44.20] 1.600 [40.64] 6-103361-5 6-102203-4 6-102523-5
18 1.920 [48.77] 1.840 [46.74] 1.700 [43.18] 6-103361-6 6-102203-5 6-102523-6
19 2.020 [51.31] 1.940 [49.28] 1.800 [45.72] 6-103361-7 6-102203-6 6-102523-7
20 2.120 [53.85] 2.040 [51.82] 1.900 [48.26] 6-103361-8 6-102203-7 6-102523-8
21 2.220 [56.39] 2.140 [54.36] 2.000 [50.80] 6-103361-9 6-102203-8 6-102523-9
22 2.320 [58.93] 2.240 [56.90] 2.100 [53.34] 7-103361-0 6-102203-9 7-102523-0
23 2.420 [61.47] 2.340 [59.44] 2.200 [55.88] 7-103361-1 7-102203-0 7-102523-1
24 2.520 [64.01] 2.440 [61.98] 2.300 [58.42] 7-103361-2 7-102203-1 7-102523-2
25 2.620 [66.55] 2.540 [64.52] 2.400 [60.96] 7-103361-3 7-102203-2 7-102523-3

Note: All part numbers are RoHS compliant.


116
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Standard Profile HeadersShrouded, with .066 [1.68]


End Dimension, Double-Row, .100 x .100 [2.54 x 2.54] Centerline
.025 [0.64] Square B
.040
[1.02] .318
Straight Post (with .066
[1.68] C
(3 Plc.) [8.08]
.200
Detent Windows) (2 Plc.) .100
Typ. [5.08]
Ref. .125
[2.54] [3.18]
(Contact Area)
.100
[2.54]

.400 .280
[10.16] [7.11]

.090
[2.29]
.090
A (2 Plc.)
[2.29]
.240
E [6.10]
Typ.
Material and Finish D

Housing Black thermoplastic,


94V-0 rated
Posts Phosphor bronze, plated as .440
[11.18]
follows: .080
[2.03]
Plating A Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin on solder area, with entire post
C
underplated .000050 [0.00127] nickel .100*
Typ.

Standard Profile Headers,


[2.54]
Plating B Duplex plated .000015
[0.00038] gold on contact area,
.000100-.000200 [0.00254-0.00508] .100*

Shrouded
.035.003 Dia. Typ.
tin on solder area, with entire post [0.890.08] [2.54]
underplated .000050 [0.00127] nickel
Recommended PC Board Hole Layout
Plating C .000100-.000200 (for .055 [1.40] min. thick PC board)
[0.00254-0.00508] tin over .000050
[0.00127] nickel on entire post
*.003 [0.08] tolerances not to accumulate
within one connector pattern.
Related Product Data
Mateable Connectors
AMPMODU Board Mount
Receptacles pages 176, 179, 180
AMPMODU Wire-Applied
No. of
Pos. A B
Dimensions
C D E
Post Plating/Part Nos.
Plating A Plating B Plating C
5
Receptacles pages 216-219 6 .412 [10.46] .332 [8.43] .200 [5.08] .106 [2.69] 5-103168-1 5-102618-1 8-87589-6
AMPMODU MTE Receptacles 8 .512 [13.00] .432 [10.97] .300 [7.62] .106 [2.69] 5-103168-2 5-102618-2 8-87589-5
pages 228, 229, 234 10 .612 [15.54] .532 [13.51] .400 [10.16] .206 [5.23] 5-103168-3 5-102618-3 5-87589-1
AMPMODU MT Receptacles 12 .712 [18.08] .632 [16.05] .500 [12.70] .206 [5.23] 5-103168-4 5-102618-4 5-87589-2
pages 256, 257
14 .812 [20.62] .732 [18.59] .600 [15.24] .306 [7.77] 5-103168-5 5-102618-5 5-87589-3
16 .912 [23.16] .832 [21.13] .700 [17.78] .306 [7.77] 5-103168-6 5-102618-6 5-87589-4
Accessories 18 1.012 [25.70 .932 [23.67] .800 [20.32] .406 [10.31] 5-103168-7 5-102618-7 5-87589-5
Barrier Insert page 204 20 1.112 [28.24] 1.032 [26.21] .900 [22.86] .106 [2.69] .806 [20.47] 5-103168-8 5-102618-8 5-87589-6
22 1.212 [30.78] 1.132 [28.75] 1.000 [25.40] .106 [2.69] .906 [23.01] 5-103168-9 5-102618-9 5-87589-7
24 1.312 [33.32] 1.232 [31.29] 1.100 [27.94] .106 [2.69] 1.006 [25.55] 6-103168-0 6-102618-0 5-87589-8
Technical Documents page 276
26 1.412 [35.86] 1.332 [33.83] 1.200 [30.48] .106 [2.69] 1.106 [28.09] 6-103168-1 6-102618-1 5-87589-9
See mating connector for applicable 28 1.512 [38.40] 1.432 [36.37] 1.300 [33.02] .106 [2.69] 1.206 [30.63] 6-103168-2 6-102618-2 6-87589-0
product and application specifications.
30 1.612 [40.94] 1.532 [38.91] 1.400 [35.56] .106 [2.69] 1.306 [33.17] 6-103168-3 6-102618-3 6-87589-1

Note: All part numbers are RoHS compliant.


117
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Standard Profile HeadersShrouded, with .066 [1.68]


End Dimension, Double-Row, .100 x .100 [2.54 x 2.54] Centerline (Continued)

No. of Dimensions Post Plating/Part Nos.


Positions A B C D E Plating A Plating B Plating C
32 1.712 [43.48] 1.632 [41.45] 1.500 [38.10] .106 [2.69] 1.406 [35.71] 6-103168-4 6-102618-4 6-87589-2
34 1.812 [46.02] 1.732 [43.99] 1.600 [40.64] .106 [2.69] 1.506 [38.25] 6-103168-5 6-102618-5 6-87589-3
36 1.912 [48.56] 1.832 [46.53] 1.700 [43.18] .106 [2.69] 1.606 [40.79] 6-103168-6 6-102618-6 6-87589-4
38 2.012 [51.10] 1.932 [49.07] 1.800 [45.72] .106 [2.69] 1.706 [43.33] 6-103168-7 6-102618-7 6-87589-5
40 2.112 [53.64] 2.032 [51.61] 1.900 [48.26] .106 [2.69] 1.806 [45.87] 6-103168-8 6-102618-8 6-87589-6
42 2.212 [56.18] 2.132 [54.15] 2.000 [50.80] .106 [2.69] 1.906 [48.41] 6-103168-9 6-102618-9 6-87589-7
44 2.312 [58.72] 2.232 [56.69] 2.100 [53.34] .106 [2.69] 2.006 [50.95] 7-103168-0 7-102618-0 6-87589-8
46 2.412 [61.26] 2.332 [59.23] 2.200 [55.88] .106 [2.69] 2.106 [53.49] 7-103168-1 7-102618-1 6-87589-9
48 2.512 [63.80] 2.432 [61.77] 2.300 [58.42] .106 [2.69] 2.206 [56.03] 7-103168-2 7-102618-2 7-87589-0
50 2.612 [66.34] 2.532 [64.31] 2.400 [60.96] .106 [2.69] 2.306 [58.57] 7-103168-3 7-102618-3 7-87589-1
52 2.712 [68.88] 2.632 [66.85] 2.500 [63.50] .106 [2.69] 2.406 [61.11] 7-103168-4 7-102618-4 7-87589-2
54 2.812 [71.42] 2.732 [69.39] 2.600 [66.04] .106 [2.69] 2.506 [63.65] 7-103168-5 7-102618-5 7-87589-3
56 2.912 [73.96] 2.832 [71.93] 2.700 [68.58] .106 [2.69] 2.606 [66.19] 7-103168-6 7-102618-6 7-87589-4
58 3.012 [76.50] 2.932 [74.47] 2.800 [71.12] .106 [2.69] 2.706 [68.73] 7-103168-7 7-102618-7 7-87589-5
60 3.112 [79.04] 3.032 [77.01] 2.900 [73.66] .106 [2.69] 2.806 [71.27] 7-103168-8 7-102618-8 7-87589-6
62 3.212 [81.58] 3.132 [79.55] 3.000 [76.20] .106 [2.69] 2.906 [73.81] 7-103168-9 7-102618-9 7-87589-7
64 3.312 [84.12] 3.232 [82.09] 3.100 [78.74] .106 [2.69] 3.006 [76.35] 8-103168-0 8-102618-0 7-87589-8
66 3.412 [86.66] 3.332 [84.63] 3.200 [81.28] .106 [2.69] 3.106 [78.89] 8-103168-1 8-102618-1 7-87589-9
68 3.512 [89.20] 3.432 [87.17] 3.300 [83.82] .106 [2.69] 3.206 [81.43] 8-103168-2 8-102618-2 8-87589-0
Standard Profile Headers,

70 3.612 [91.74] 3.532 [89.71] 3.400 [86.36] .106 [2.69] 3.306 [83.97] 8-103168-3 8-102618-3 8-87589-1
72 3.712 [94.28] 3.632 [92.25] 3.500 [88.90] .106 [2.69] 3.406 [86.51] 8-103168-4 8-102618-4 8-87589-2
Shrouded

74 3.812 [96.82] 3.732 [94.79] 3.600 [91.44] .106 [2.69] 3.506 [89.05] 8-103168-5 8-102618-5 8-87589-3

118
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Standard Profile HeadersShrouded, with .150 [3.81] End Dimension,


Double-Row, .100 x .100 [2.54 x 2.54] Centerline
.025 [0.64] Square B
.040
[1.02]
.150
Straight Post (with [3.81] C
(3 Plc.)
.318
[8.08]
.200 .125
Detent Windows) (2 Plc.) .100
Typ. [5.08]
Ref.
[3.18]
[2.54]
(Contact Area)
.100
[2.54]
.400 .280
[10.16] [7.11]

.090 .090
A
[2.29] [2.29]
(2 Plc.)
.240
E Typ.
[6.10]
D
Material and Finish .080
[2.03]
Housing Black thermoplastic,
94V-0 rated .440
Posts Phosphor bronze, plated as [11.18]
follows:
Plating A Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin on solder area, with entire post C
.100*
underplated .000050 [0.00127] nickel [2.54]
Typ.

Standard Profile Headers,


Plating B Duplex plated .000015
[0.00038] gold on contact area,
.000100-.000200 [0.00254-0.00508] .100*

Shrouded
.035.003 Dia. Typ. [2.54]
tin on solder area, with entire post [0.890.08]
underplated .000050 [0.00127] nickel
Recommended PC Board Hole Layout
Plating C .000100-.000200 (for .055 [1.40] min. thick PC board)
[0.00254-0.00508] tin over .000050
[0.00127] nickel on entire post *.003 [0.08] tolerances not to accumulate
within one connector pattern.

Related Product Data


Mateable Connectors
AMPMODU MTE Receptacles
pages 232, 233, 235 (used with
coupling shroud on page 241)
5
AMPMODU Wire-Applied
Receptacles pages 216-219
No. of Dimensions Post Plating/Part Nos.
Pos. A B C D E Plating A Plating B Plating C
6 .580 [14.73] .500 [12.70] .200 [5.08] .190 [4.83] 5-103169-1 5-102619-1 8-87587-3
8 .680 [17.27] .600 [15.24] .300 [7.62] .190 [4.83] 5-103169-2 5-102619-2 8-87587-4
Accessories 10 .780 [19.81] .700 [17.78] .400 [10.16] .290 [7.37] 5-103169-3 5-102619-3 5-87587-1
Barrier Insert page 204 12 .880 [22.35] .800 [20.32] .500 [12.70] .290 [7.37] 5-103169-4 5-102619-4 5-87587-2
14 .980 [24.89] .900 [22.86] .600 [15.24] .390 [9.91] 5-103169-5 5-102619-5 5-87587-3
16 1.080 [27.43] 1.000 [25.40] .700 [17.78] .390 [9.91] 5-103169-6 5-102619-6 5-87587-4
Technical Documents page 276
18 1.180 [29.97] 1.100 [27.94] .800 [20.32] .490 [12.45] 5-103169-7 5-102619-7 5-87587-5
See mating connector for applicable
20 1.280 [32.51] 1.200 [30.48] .900 [22.86] .190 [4.83] .890 [22.61] 5-103169-8 5-102619-8 5-87587-6
product and application specifications.
22 1.380 [35.05] 1.300 [33.02] 1.000 [25.40] .190 [4.83] .990 [25.15] 5-103169-9 5-102619-9 5-87587-7
24 1.480 [37.59] 1.400 [35.56] 1.100 [27.94] .190 [4.83] 1.090 [27.69] 6-103169-0 6-102619-0 5-87587-8
26 1.580 [40.13] 1.500 [38.10] 1.200 [30.48] .190 [4.83] 1.190 [30.23] 6-103169-1 6-102619-1 5-87587-9
28 1.680 [42.67] 1.600 [40.64] 1.300 [33.02] .190 [4.83] 1.290 [32.77] 6-103169-2 6-102619-2 6-87587-0
30 1.780 [45.21] 1.700 [43.18] 1.400 [35.56] .190 [4.83] 1.390 [35.31] 6-103169-3 6-102619-3 6-87587-1

Note: All part numbers are RoHS compliant.


119
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Standard Profile HeadersShrouded, with .150 [3.81] End Dimension,


Double-Row, .100 x .100 [2.54 x 2.54] Centerline (Continued)

No. of Dimensions Post Plating/Part Nos.


Pos. A B C D E Plating A Plating B Plating C
32 1.880 [47.75] 1.800 [45.72] 1.500 [38.10] .190 [4.83] 1.490 [37.85] 6-103169-4 6-102619-4 6-87587-2
34 1.980 [50.29] 1.900 [48.26] 1.600 [40.64] .190 [4.83] 1.590 [40.39] 6-103169-5 6-102619-5 6-87587-3
36 2.080 [52.83] 2.000 [50.80] 1.700 [43.18] .190 [4.83] 1.690 [42.93] 6-103169-6 6-102619-6 6-87587-4
38 2.180 [55.37] 2.100 [53.34] 1.800 [45.72] .190 [4.83] 1.790 [45.47] 6-103169-7 6-102619-7 6-87587-5
40 2.280 [57.91] 2.200 [55.88] 1.900 [48.26] .190 [4.83] 1.890 [48.01] 6-103169-8 6-102619-8 6-87587-6
42 2.380 [60.45] 2.300 [58.42] 2.000 [50.80] .190 [4.83] 1.990 [50.55] 6-103169-9 6-102619-9 6-87587-7
44 2.480 [62.99] 2.400 [60.96] 2.100 [53.34] .190 [4.83] 2.090 [53.09] 7-103169-0 7-102619-0 6-87587-8
46 2.580 [65.53] 2.500 [63.50] 2.200 [55.88] .190 [4.83] 2.190 [55.63] 7-103169-1 7-102619-1 6-87587-9
48 2.680 [68.07] 2.600 [66.04] 2.300 [58.42] .190 [4.83] 2.290 [58.17] 7-103169-2 7-102619-2 7-87587-0
50 2.780 [70.61] 2.700 [68.58] 2.400 [60.96] .190 [4.83] 2.390 [60.71] 7-103169-3 7-102619-3 7-87587-1
52 2.880 [73.15] 2.800 [71.12] 2.500 [63.50] .190 [4.83] 2.490 [63.25] 7-103169-4 7-102619-4 7-87587-2
54 2.980 [75.69] 2.900 [73.66] 2.600 [66.04] .190 [4.83] 2.590 [65.79] 7-103169-5 7-102619-5 7-87587-3
56 3.080 [78.23] 3.000 [76.20] 2.700 [68.58] .190 [4.83] 2.690 [68.33] 7-103169-6 7-102619-6 7-87587-4
58 3.180 [80.77] 3.100 [78.74] 2.800 [71.12] .190 [4.83] 2.790 [70.87] 7-103169-7 7-102619-7 7-87587-5
60 3.280 [83.31] 3.200 [81.28] 2.900 [73.66] .190 [4.83] 2.890 [73.41] 7-103169-8 7-102619-8 7-87587-6
62 3.380 [85.85] 3.300 [83.82] 3.000 [76.20] .190 [4.83] 2.990 [75.95] 7-103169-9 7-102619-9 7-87587-7
64 3.480 [88.39] 3.400 [86.36] 3.100 [78.74] .190 [4.83] 3.090 [78.49] 8-103169-0 8-102619-0 7-87587-8
66 3.580 [90.93] 3.500 [88.90] 3.200 [81.28] .190 [4.83] 3.190 [81.03] 8-103169-1 8-102619-1 7-87587-9
68 3.680 [93.47] 3.600 [91.44] 3.300 [83.82] .190 [4.83] 3.290 [83.57] 8-103169-2 8-102619-2 8-87587-0
70 3.780 [96.01] 3.700 [93.98] 3.400 [86.36] .190 [4.83] 3.390 [86.11] 8-103169-3 8-102619-3 8-87587-1
72 3.880 [98.55] 3.800 [96.52] 3.500 [88.90] .190 [4.83] 3.490 [88.65] 8-103169-4 8-102619-4 8-87587-2
Standard Profile Headers,
Shrouded

Note: All part numbers are RoHS compliant.


120
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Standard Profile HeadersShrouded, with .150 [3.81] End Dimension,


Double-Row, .100 x .100 [2.54 x 2.54] Centerline (Continued)
.025 [0.64] Square .200
Ref.
[5.08]
Straight Post (with .040
(Contact Area)
.150 B [1.02]
Plastic Holddowns) [3.81] C (3 Plc.)
.318
[8.08]
.100 .125
(2 Plc.) Typ.
[2.54] [3.18]
.100
[2.54]
.400 .280
[10.16] [7.11]

.090
.015 .050 [2.29]
(2 Plc.) (2 Plc.) .090
[.020] [1.27]
A [2.29] .180
[ ]0.38
[0.51]
[4.57]

Material and Finish


Housing Black thermoplastic,
94V-0 rated .440
Posts Phosphor bronze, duplex [11.18]
plated .000015 [0.00038] gold on
contact area, .000100-.000200
[0.00254-0.00508] tin on solder area,
with entire post underplated .000050
[0.00127] nickel .140 C
[3.56] .100*
.100*

Standard Profile Headers,


(2 Plc.) Typ. [2.54]
[2.54]
Related Product Data
Mateable Connectors

Shrouded
AMPMODU MTE Receptacles .040.003 Dia. Typ.
pages 232, 233, 235 (used with .093+.004 Dia. Typ. [1.020.08]
-.000
.093
coupling shroud on page 241) 2.36+0.10
[ -.000 ] Recommended PC Board Hole Layout
AMPMODU Wire-Applied 2.36
(for .055 [1.40] min. thick PC board)
Receptacles pages 216-219
*.003 [0.08] tolerances not to accumulate
within one connector pattern.

Accessories
Barrier Insert page 204
No. of
Pos. A
Dimensions
B C
Part Nos.
Plating A
5
6 .580 [14.73] .500 [12.70] .200 [5.08] 5-104317-1
10 .780 [19.81] .700 [17.78] .400 [10.16] 5-104317-2
Technical Documents page 276 12 .880 [22.35] .800 [20.32] .500 [12.70] 5-104317-3
14 .980 [24.89] .900 [22.86] .600 [15.24] 5-104317-4
See mating connector for applicable
16 1.080 [27.43] 1.000 [25.40] .700 [17.78] 6-104317-6
product and application specifications.
18 1.180 [29.97] 1.100 [27.94] .800 [20.32] 5-104317-5
20 1.280 [32.51] 1.200 [30.48] .900 [22.86] 5-104317-6
22 1.380 [35.05] 1.300 [33.02] 1.000 [25.40] 5-104317-7
24 1.480 [37.59] 1.400 [35.56] 1.100 [27.94] 5-104317-8
26 1.580 [40.13] 1.500 [38.10] 1.200 [30.48] 5-104317-9
30 1.780 [45.21] 1.700 [43.18] 1.400 [35.56] 6-104317-0
32 1.880 [47.75] 1.800 [45.72] 1.500 [38.10] 6-104317-1
34 1.980 [50.29] 1.900 [48.26] 1.600 [40.64] 6-104317-8
36 2.080 [52.83] 2.000 [50.80] 1.700 [43.18] 6-104317-7
40 2.280 [57.91] 2.200 [55.88] 1.900 [48.26] 6-104317-2
42 2.380 [60.45] 2.300 [58.42] 2.000 [50.80] 6-104317-5
48 2.680 [68.07] 2.600 [66.04] 2.300 [58.42] 6-104317-3
50 2.780 [70.61] 2.700 [68.58] 2.400 [60.96] 6-104317-4

Note: All part numbers are RoHS compliant.


121
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Standard Profile HeadersShrouded, with .066 [1.68] End Dimension,


Double-Row, .100 x .100 [2.54 x 2.54] Centerline
.025 [0.64] Square .040
[1.02]
.318
B [8.08]
Right-Angle Post .066 (3 Plc.) .200
Ref.
[1.68] C [5.08]
(with Detent Windows) (2 Plc.) (Contact Area)
.100
Typ.
[2.54]
.100
[2.54]
.280
.400 .135
[7.11]
[10.16] [3.43]

.013
[0.33] .090
(Standoffs) [2.29]
(2 Plc.)
A .157
[3.99]
Material and Finish
.100
Housing Black thermoplastic, [2.54]
94V-0 rated .240
E [6.10]
Posts Phosphor bronze, plated as Typ.
follows: D
Plating A Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
.489
tin on solder area, with entire post [12.42]
underplated .000050 [0.00127] nickel .639 .080
[16.23] [2.03]
Standard Profile Headers,

Plating B Duplex plated .000015


[0.00038] gold on contact area,
.000100-.000200 [0.00254-0.00508]
Shrouded

tin on solder area, with entire post


underplated .000050 [0.00127] nickel
Plating C .000100-.000200
[0.00254-0.00508] tin over .000050
C
[0.00127] nickel on entire post
.100*
Typ.
[2.54]

Related Product Data

5
Mateable Connectors .035.003 Dia. Typ.
.100*
[2.54]
AMPMODU Board Mount [0.890.08]
Receptacles pages 176, 179, 180
Recommended PC Board Hole Layout
AMPMODU Wire-Applied (for .055 [1.40] min. thick PC board)
Receptacles pages 216-219
AMPMODU MTE Receptacles *.003 [0.08] tolerances not to accumulate
pages 228, 229, 234 within one connector pattern.
AMPMODU MT Receptacles
pages 256, 257
No. of Dimensions Post Plating/Part Nos.
Pos. A B C D E Plating A Plating B Plating C
Technical Documents page 276 6 .412 [10.46] .332 [8.43] .200 [5.08] .106 [2.69] 5-103166-1 5-102617-1 8-87579-5
See mating connector for applicable 8 .512 [13.00] .432 [10.97] .300 [7.62] .106 [2.69] 5-103166-2 5-102617-2 5-87579-1
product and application specifications. 10 .612 [15.54] .532 [13.51] .400 [10.16] .206 [5.23] 5-103166-3 5-102617-3 5-87579-2
12 .712 [18.08] .632 [16.05] .500 [12.70] .206 [5.23] 5-103166-4 5-102617-4 5-87579-3
14 .812 [20.62] .732 [18.59] .600 [15.24] .306 [7.77] 5-103166-5 5-102617-5 5-87579-4
16 .912 [23.16] .832 [21.13] .700 [17.78] .306 [7.77] 5-103166-6 5-102617-6 5-87579-5
18 1.012 [25.70] .932 [23.67] .800 [20.32] .406 [10.31] 5-103166-7 5-102617-7 5-87579-6
20 1.112 [28.24] 1.032 [26.21] .900 [22.86] .106 [2.69] .806 [20.47] 5-103166-8 5-102617-8 5-87579-7
22 1.212 [30.78] 1.132 [28.75] 1.000 [25.40] .106 [2.69] .906 [23.01] 5-103166-9 5-102617-9 5-87579-8
24 1.312 [33.32] 1.232 [31.29] 1.100 [27.94] .106 [2.69] 1.006 [25.55] 6-103166-0 6-102617-0 5-87579-9
26 1.412 [35.86] 1.332 [33.83] 1.200 [30.48] .106 [2.69] 1.106 [28.09] 6-103166-1 6-102617-1 6-87579-0
28 1.512 [38.40] 1.432 [36.37] 1.300 [33.02] .106 [2.69] 1.206 [30.63] 6-103166-2 6-102617-2 6-87579-1
30 1.612 [40.94] 1.532 [38.91] 1.400 [35.56] .106 [2.69] 1.306 [33.17] 6-103166-3 6-102617-3 6-87579-2

Note: All part numbers are RoHS compliant.


122
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Standard Profile HeadersShrouded, with .066 [1.68] End Dimension,


Double-Row, .100 x .100 [2.54 x 2.54] Centerline (Continued)

No. of Dimensions Post Plating/Part Nos.


Pos. A B C D E Plating A Plating B Plating C
32 1.712 [43.48] 1.632 [41.45] 1.500 [38.10] .106 [2.69] 1.406 [35.71] 6-103166-4 6-102617-4 6-87579-3
34 1.812 [46.02] 1.732 [43.99] 1.600 [40.64] .106 [2.69] 1.506 [38.25] 6-103166-5 6-102617-5 6-87579-4
36 1.912 [48.56] 1.832 [46.53] 1.700 [43.18] .106 [2.69] 1.606 [40.79] 6-103166-6 6-102617-6 6-87579-5
38 2.012 [51.10] 1.932 [49.07] 1.800 [45.72] .106 [2.69] 1.706 [43.33] 6-103166-7 6-102617-7 6-87579-6
40 2.112 [53.64] 2.032 [51.61] 1.900 [48.26] .106 [2.69] 1.806 [45.87] 6-103166-8 6-102617-8 6-87579-7
42 2.212 [56.18] 2.132 [54.15] 2.000 [50.80] .106 [2.69] 1.906 [48.41] 6-103166-9 6-102617-9 6-87579-8
44 2.312 [58.72] 2.232 [56.69] 2.100 [53.34] .106 [2.69] 2.006 [50.95] 7-103166-0 7-102617-0 6-87579-9
46 2.412 [61.26] 2.332 [59.23] 2.200 [55.88] .106 [2.69] 2.106 [53.49] 7-103166-1 7-102617-1 7-87579-0
48 2.512 [63.80] 2.432 [61.77] 2.300 [58.42] .106 [2.69] 2.206 [56.03] 7-103166-2 7-102617-2 7-87579-1
50 2.612 [66.34] 2.532 [64.31] 2.400 [60.96] .106 [2.69] 2.306 [58.57] 7-103166-3 7-102617-3 7-87579-2
52 2.712 [68.88] 2.632 [66.85] 2.500 [63.50] .106 [2.69] 2.406 [61.11] 7-103166-4 7-102617-4 7-87579-3
54 2.812 [71.42] 2.732 [69.39] 2.600 [66.04] .106 [2.69] 2.506 [63.65] 7-103166-5 7-102617-5 7-87579-4
56 2.912 [73.96] 2.832 [71.93] 2.700 [68.58] .106 [2.69] 2.606 [66.19] 7-103166-6 7-102617-6 7-87579-5
58 3.012 [76.50] 2.932 [74.47] 2.800 [71.12] .106 [2.69] 2.706 [68.73] 7-103166-7 7-102617-7 7-87579-6
60 3.112 [79.04] 3.032 [77.01] 2.900 [73.66] .106 [2.69] 2.806 [71.27] 7-103166-8 7-102617-8 7-87579-7
62 3.212 [81.58] 3.132 [79.55] 3.000 [76.20] .106 [2.69] 2.906 [73.81] 7-103166-9 7-102617-9 7-87579-8
64 3.312 [84.12] 3.232 [82.09] 3.100 [78.74] .106 [2.69] 3.006 [76.35] 8-103166-0 8-102617-0 7-87579-9
66 3.412 [86.66] 3.332 [84.63] 3.200 [81.28] .106 [2.69] 3.106 [78.89] 8-103166-1 8-102617-1 8-87579-0
68 3.512 [89.20] 3.432 [87.17] 3.300 [83.82] .106 [2.69] 3.206 [81.43] 8-103166-2 8-102617-2 8-87579-1
70 3.612 [91.74] 3.532 [89.71] 3.400 [86.36] .106 [2.69] 3.306 [83.97] 8-103166-3 8-102617-3 8-87579-2
72 3.712 [94.28] 3.632 [92.25] 3.500 [88.90] .106 [2.69] 3.406 [86.51] 8-103166-4 8-102617-4 8-87579-3

Standard Profile Headers,


74 3.812 [96.82] 3.732 [94.79] 3.600 [91.44] .106 [2.69] 3.506 [89.05] 8-103166-5 8-102617-5 8-87579-4

Shrouded
5

Note: All part numbers are RoHS compliant.


123
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Standard Profile HeadersShrouded, with .150 [3.81] End Dimension,


Double-Row, .100 x .100 [2.54 x 2.54] Centerline
.025 [0.64] Square .040
[1.02]
B
Right-Angle Post .150 (3 Plc.)
.318
[3.81] C .289
(with Detent Windows) (2 Plc.) .200 [8.08] [7.34]
.100 Ref.
Typ. [5.08]
[2.54]
.100 (Contact Area)
[2.54]

.400
[10.16] .280 .135
[7.11] [3.43]

.013
.090
[0.33]
[2.29]
(Standoffs)
(2 Plc.)
A
Material and Finish
.157
Housing Black thermoplastic, [3.99] .100
[2.54]
94V-0 rated .240
E [6.10]
Posts Phosphor bronze, plated as
Typ.
follows: D
Plating A Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
.489
tin on solder area, with entire post [12.42]
.639 .080
underplated .000050 [0.00127] nickel [16.23] [2.03]
Plating B Duplex plated .000015
Standard Profile Headers,

[0.00038] gold on contact area,


.000100-.000200 [0.00254-0.00508]
tin on solder area, with entire post
Shrouded

underplated .000050 [0.00127] nickel


Plating C .000100-.000200
[0.00254-0.00508] tin over .000050
[0.00127] nickel on entire post
C
.100*
Typ.
[2.54]
Related Product Data
Mateable Connectors

5 AMPMODU MTE Receptacles


pages 232, 233, 235 (used with
coupling shroud on page 241)
AMPMODU Wire-Applied
.035.003
[0.890.08]
Dia. Typ.
.100*
[2.54]

Recommended PC Board Hole Layout


Receptacles pages 216-219 (for .055 [1.40] min. thick PC board)

*.003 [0.08] tolerances not to accumulate


within one connector pattern.

Technical Documents page 276 No. of Dimensions Post Plating/Part Nos.


Pos. A B C D E Plating A Plating B Plating C
See mating connector for applicable
8 .680 [17.27] .600 [15.24] .300 [7.62] .190 [4.83] 5-103167-1 5-102570-2 5-87577-1
product and application specifications.
10 .780 [19.81] .700 [17.78] .400 [10.16] .290 [7.37] 5-103167-2 5-102570-3 5-87577-2
12 .880 [22.35] .800 [20.32] .500 [12.70] .290 [7.37] 5-103167-3 5-102570-4 5-87577-3
14 .980 [24.89] .900 [22.86] .600 [15.24] .390 [9.91] 5-103167-4 5-102570-5 5-87577-4
16 1.080 [27.43] 1.000 [25.40] .700 [17.78] .390 [9.91] 5-103167-5 5-102570-6 5-87577-5
18 1.180 [29.97] 1.100 [27.94] .800 [20.32] .490 [12.45] 5-103167-6 5-102570-7 5-87577-6
20 1.280 [32.51] 1.200 [30.48] .900 [22.86] .190 [4.83] .890 [22.61] 5-103167-7 5-102570-8 5-87577-7
22 1.380 [35.05] 1.300 [33.02] 1.000 [25.40] .190 [4.83] .990 [25.15] 5-103167-8 5-102570-9 5-87577-8
24 1.480 [37.59] 1.400 [35.56] 1.100 [27.94] .190 [4.83] 1.090 [27.69] 5-103167-9 6-102570-0 5-87577-9
26 1.580 [40.13] 1.500 [38.10] 1.200 [30.48] .190 [4.83] 1.190 [30.23] 6-103167-0 6-102570-1 6-87577-0
28 1.680 [42.67] 1.600 [40.64] 1.300 [33.02] .190 [4.83] 1.290 [32.77] 6-103167-1 6-102570-2 6-87577-1
30 1.780 [45.21] 1.700 [43.18] 1.400 [35.56] .190 [4.83] 1.390 [35.31] 6-103167-2 6-102570-3 6-87577-2

Note: All part numbers are RoHS compliant.


124
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Standard Profile HeadersShrouded, with .150 [3.81] End Dimension,


Double-Row, .100 x .100 [2.54 x 2.54] Centerline (Continued)

No. of Dimensions Post Plating/Part Nos.


Pos. A B C D E Plating A Plating B Plating C
32 1.880 [47.75] 1.800 [45.72] 1.500 [38.10] .190 [4.83] 1.490 [37.85] 6-103167-3 6-102570-4 6-87577-3
34 1.980 [50.29] 1.900 [48.26] 1.600 [40.64] .190 [4.83] 1.590 [40.39] 6-103167-4 6-102570-5 6-87577-4
36 2.080 [52.83] 2.000 [50.80] 1.700 [43.18] .190 [4.83] 1.690 [42.93] 6-103167-5 6-102570-6 6-87577-5
38 2.180 [55.37] 2.100 [53.34] 1.800 [45.72] .190 [4.83] 1.790 [45.47] 6-103167-6 6-102570-7 6-87577-6
40 2.280 [57.91] 2.200 [55.88] 1.900 [48.26] .190 [4.83] 1.890 [48.01] 6-103167-7 5-102570-1 6-87577-7
42 2.380 [60.45] 2.300 [58.42] 2.000 [50.80] .190 [4.83] 1.990 [50.55] 6-103167-8 6-102570-8 6-87577-8
44 2.480 [62.99] 2.400 [60.96] 2.100 [53.34] .190 [4.83] 2.090 [53.09] 6-103167-9 6-102570-9 6-87577-9
46 2.580 [65.53] 2.500 [63.50] 2.200 [55.88] .190 [4.83] 2.190 [55.63] 7-103167-0 7-102570-0 7-87577-0
48 2.680 [68.07] 2.600 [66.04] 2.300 [58.42] .190 [4.83] 2.290 [58.17] 7-103167-1 7-102570-1 7-87577-1
50 2.780 [70.61] 2.700 [68.58] 2.400 [60.96] .190 [4.83] 2.390 [60.71] 7-103167-2 7-102570-2 7-87577-2
52 2.880 [73.15] 2.800 [71.12] 2.500 [63.50] .190 [4.83] 2.490 [63.25] 7-103167-3 7-102570-3 7-87577-3
54 2.980 [75.69] 2.900 [73.66] 2.600 [66.04] .190 [4.83] 2.590 [65.79] 7-103167-4 7-102570-4 7-87577-4
56 3.080 [78.23] 3.000 [76.20] 2.700 [68.58] .190 [4.83] 2.690 [68.33] 7-103167-5 7-102570-5 7-87577-5
58 3.180 [80.77] 3.100 [78.74] 2.800 [71.12] .190 [4.83] 2.790 [70.87] 7-103167-6 7-102570-6 7-87577-6
60 3.280 [83.31] 3.200 [81.28] 2.900 [73.66] .190 [4.83] 2.890 [73.41] 7-103167-7 7-102570-7 7-87577-7
62 3.380 [85.85] 3.300 [83.82] 3.000 [76.20] .190 [4.83] 2.990 [75.95] 7-103167-8 7-102570-8 7-87577-8
64 3.480 [88.39] 3.400 [86.36] 3.100 [78.74] .190 [4.83] 3.090 [78.49] 7-103167-9 7-102570-9 7-87577-9
66 3.580 [90.93] 3.500 [88.90] 3.200 [81.28] .190 [4.83] 3.190 [81.03] 8-103167-0 8-102570-0 8-87577-0
68 3.680 [93.47] 3.600 [91.44] 3.300 [83.82] .190 [4.83] 3.290 [83.57] 8-103167-1 8-102570-1 8-87577-1
70 3.780 [96.01] 3.700 [93.98] 3.400 [86.36] .190 [4.83] 3.390 [86.11] 8-103167-2 8-102570-2 8-87577-2
72 3.880 [98.55] 3.800 [96.52] 3.500 [88.90] .190 [4.83] 3.490 [88.65] 8-103167-3 8-102570-3 8-87577-3

Standard Profile Headers,


Shrouded
5

Note: All part numbers are RoHS compliant.


125
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Standard Profile HeadersShrouded, with .066 [1.68] End Dimension,


Double-Row, .100 x .100 [2.54 x 2.54] Centerline

.025 [0.64] Square


Right-Angle Post
(with Pin Protection
on 3 Sides)
.639
[16.23] .489
[12.42]

.200
Ref.
[5.08]
.040 (Contact Area)
[1.02] B
(2 Plc.) .318 .289
C .100 [8.08] [7.34]
Material and Finish .066 .100
Typ.
[2.54]
[1.68] [2.54]
Housing Black thermoplastic, (2 Plc.)
94V-0 rated
Posts Phosphor bronze, plated as
follows: .361 .125
.280
[9.17] [3.18]
[7.11]
Plating A Duplex plated .000030
[0.00076] gold on contact area,
.100
.000100-.000200 [0.00254-0.00508] [2.54]
tin on solder area, with entire post
underplated .000050 [0.00127] nickel .090
Standard Profile Headers,

A .157
[2.29]
[3.99]
Plating B Duplex plated .000015 (2 Plc.)
[0.00038] gold on contact area, .100
[2.54]
Shrouded

.000100-.000200 [0.00254-0.00508]
tin on solder area, with entire post C
.100*
underplated .000050 [0.00127] nickel [2.54]
Plating C .000100-.000200
[0.00254-0.00508] tin over .000050
[0.00127] nickel on entire post
.100* .035.003
[2.54] Dia. Typ.
[0.890.08]

Related Product Data

5 Mateable Connectors
AMPMODU Board Mount
Receptacles pages 176, 179, 180
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)

*.003 [0.08] tolerances not to accumulate


within one connector pattern.
AMPMODU Wire-Applied
Receptacles pages 216, 217
AMPMODU MTE Receptacles
pages 228, 229, 234
No. of Dimensions Post Plating/Part Nos.
AMPMODU MT Receptacles Pos. A B C Plating A Plating B Plating C
pages 256, 257 6 .412 [10.46] .332 [8.43] .200 [5.08] 5-103164-1 5-102055-2 8-87572-5
8 .512 [13.00] .432 [10.97] .300 [7.62] 5-103164-2 5-102055-3 5-87572-1
10 .612 [15.54] .532 [13.51] .400 [10.16] 5-103164-3 5-102055-4 5-87572-2
Technical Documents page 276
12 .712 [18.08] .632 [16.05] .500 [12.70] 5-103164-4 5-102055-5 5-87572-3
See mating connector for applicable 14 .812 [20.62] .732 [18.59] .600 [15.24] 5-103164-5 5-102055-6 5-87572-4
product and application specifications. 16 .912 [23.16] .832 [21.13] .700 [17.78] 5-103164-6 5-102055-7 5-87572-5
18 1.012 [25.70] .932 [23.67] .800 [20.32] 5-103164-7 5-102055-8 5-87572-6
20 1.112 [28.24] 1.032 [26.21] .900 [22.86] 5-103164-8 5-102055-1 5-87572-7
24 1.312 [33.32] 1.232 [31.29] 1.100 [27.94] 6-103164-0 6-102055-0
26 1.412 [35.86] 1.332 [33.83] 1.200 [30.48] 6-103164-1 6-87572-0
30 1.612 [40.94] 1.532 [38.91] 1.400 [35.56] 6-103164-3 6-102055-3
34 1.812 [46.02] 1.732 [43.99] 1.600 [40.64] 6-103164-5 6-102055-5 6-87572-4
40 2.112 [53.64] 2.032 [51.61] 1.900 [48.26] 6-103164-8 6-102055-8 6-87572-7
50 2.612 [66.34] 2.532 [64.31] 2.400 [60.96] 7-103164-3 7-102055-3 7-87572-2
52 2.712 [68.88] 2.632 [66.85] 2.500 [63.50] 7-103164-4
54 2.812 [71.42] 2.732 [69.36] 2.600 [66.04] 7-102055-5
60 3.112 [79.04] 3.032 [77.01] 2.900 [73.66] 7-103164-8 7-102055-8 7-87572-7

Note: All part numbers are RoHS compliant.


126
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Standard Profile HeadersShrouded, with .150 [3.81] End Dimension,


Double-Row, .100 x .100 [2.54 x 2.54] Centerline
.025 [0.64] Square
Right-Angle Post
(with Pin Protection
on 3 Sides)

.639
[16.23]
.489
[12.42]

Material and Finish


.200
Housing Black thermoplastic, .040 [5.08]
Ref.
94V-0 rated [1.02] B (Contact Area)
(2 Plc.) .318 .289
Posts Phosphor bronze, plated as C [8.08] [7.34]
follows: .150 .361
.100
[3.81] Typ. [9.17]
Plating A Duplex plated .000030 [2.54]
(2 Plc.)
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin on solder area, with entire post .361 .280
underplated .000050 [0.00127] nickel [9.17]

Standard Profile Headers,


[7.11]
Plating B Duplex plated .000015
[0.00038] gold on contact area,
.000100-.000200 [0.00254-0.00508]

Shrouded
.100 .090
tin on solder area, with entire post [2.54] [2.29] .157
A (2 Plc.) [3.99]
underplated .000050 [0.00127] nickel .125
Plating C .000100-.000200 .100 [3.18]
[2.54]
[0.00254-0.00508] tin over .000050
[0.00127] nickel on entire post

.100*
Related Product Data [2.54]
Mateable Connectors
AMPMODU Wire-Applied
Receptacles pages 216, 217
.100*
Typ.

[2.54]

.035.003
C
5
Dia. Typ.
[0.890.08]

Recommended PC Board Hole Layout


Technical Documents page 276 (for .055 [1.40] min. thick PC board)

See mating connector for applicable *.003 [0.08] tolerances not to accumulate
product and application specifications. within one connector pattern.

No. of Dimensions Post Plating/Part Nos.


Pos. A B C Plating A Plating B Plating C
10 .780 [19.81] .700 [17.78] .400 [10.16] 5-103165-1 5-102620-1 5-87568-1
12 .880 [22.35] .800 [20.32] .500 [12.70] 5-103165-2 5-102620-2 5-87568-2
14 .980 [24.89] .900 [22.86] .600 [15.24] 5-103165-3 5-102620-3 5-87568-3
16 1.080 [27.43] 1.000 [25.40] .700 [17.78] 5-103165-4 5-102620-4 5-87568-4
18 1.180 [29.97] 1.100 [27.94] .800 [20.32] 5-103165-5 5-102620-5 5-87568-5
20 1.280 [32.51] 1.200 [30.48] .900 [22.86] 5-103165-6 5-102620-6 5-87568-6
24 1.480 [37.59] 1.400 [35.56] 1.100 [27.94] 5-103165-8 5-102620-8
26 1.580 [40.13] 1.500 [38.10] 1.200 [30.48] 5-103165-9 5-102620-9 5-87568-9
30 1.780 [45.21] 1.700 [43.18] 1.400 [35.56] 6-103165-1 6-102620-1
34 1.980 [50.29] 1.900 [48.26] 1.600 [40.64] 6-103165-3 6-102620-3 6-87568-3
40 2.280 [57.91] 2.200 [55.88] 1.900 [48.26] 6-103165-6 6-102620-6 6-87568-6
50 2.780 [70.61] 2.700 [68.58] 2.400 [60.96] 7-103165-1 7-102620-1 7-87568-1
60 3.280 [83.31] 3.200 [81.28] 2.900 [73.66] 7-103165-6 7-102620-6 7-87568-6

Note: All part numbers are RoHS compliant.


127
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Standard Profile HeadersShrouded, with .150 [3.81] End Dimension,


Double-Row, .100 x .100 [2.54 x 2.54] Centerline
.025 [0.64] Square
Right-Angle Post
(with Plastic Holddowns) .639
.489 [16.23]
[12.42]

.200
Ref.
.040 [5.08]
B [1.02] (Contact Area)
.150 (2 Plc.)
[3.81] C .318 .289
(2 Plc.) .100 [8.08] [7.34]
Typ.
[2.54]
Material and Finish .100
[2.54]
Housing Black thermoplastic,
.400 .280
94V-0 rated [10.16] [7.11]
Posts Phosphor bronze, duplex
plated .000015 [0.00038] gold on
.135
contact area, .000100-.000200 .090 [3.43]
.015
[0.00254-0.00508] tin on solder area, [.020]
[2.29]
.050 (2 Plc.)
with entire post underplated .000050 [1.27]
(2 Plc.) .451
[0.00127] nickel [ ]0.38
[0.51]
A .180
[4.57]
[11.46]
.100
(Standoffs) [2.54]
Standard Profile Headers,

Related Product Data .140


[3.56] C
Mateable Connectors
Shrouded

(2 Plc.) .100 .100*


Typ.
AMPMODU MTE Receptacles [2.54] [2.54]
pages 232, 233, 235 (used with
coupling shroud on page 241)
AMPMODU Wire-Applied
Receptacles pages 216-219 .040.003
Dia. Typ. .451
[1.020.08] [11.46]

5 Technical Documents page 276


See mating connector for applicable
.093+.004 Dia.
.09 -.000
2.36+0.10
[2.36-.000
]
product and application specifications. (2 Plc.)
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)

*.003 [0.08] tolerances not to accumulate


within one connector pattern.

No. of Dimensions Part Nos.


Pos. A B C
10 .780 [19.81] .700 [17.78] .400 [10.16] 5-104319-7
12 .880 [22.35] .800 [20.32] .500 [12.70] 5-104319-8
14 .980 [24.89] .900 [22.86] .600 [15.24] 5-104319-5
16 1.080 [27.43] 1.000 [25.40] .700 [17.78] 5-104319-1
20 1.280 [32.51] 1.200 [30.48] .900 [20.86] 5-104319-2
30 1.780 [45.21] 1.700 [43.18] 1.400 [35.56] 5-104319-3
34 1.980 [50.29] 1.900 [48.26] 1.600 [40.64] 5-104319-6
40 2.280 [57.91] 2.200 [55.88] 1.900 [48.26] 5-104319-4
48 2.680 [68.07] 2.600 [66.04] 2.300 [58.42] 5-104319-9

Note: All part numbers are RoHS compliant.


128
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Standard Profile HeadersShrouded, with .150 [3.81] End Dimension,


Double-Row, .100 x .100 [2.54 x 2.54] Centerline (Continued)
.025 [0.64] Square .352
[8.94] .200
.220 .150 Ref.
Straight Post (with [5.59]
Typ. [3.81] .062 R
[5.08]
(Contact Area)
Typ.
Detent Windows and Typ. [1.57]
Typ. .100
.090
[2.29]
Mounting Ears) [2.54]

.400 .280
[10.16] [7.11]

.100 Typ. .090 .318 .125


[2.54] [2.29] [8.08] [3.18]
C Typ.
B .047 (2 Plc.)
[1.19]
D
E
Material and Finish
Housing Black thermoplastic,
94V-0 rated
A
Posts Copper alloy, plated .000030 F
[0.00076] gold over .000050 [0.00127]
nickel on entire post .080
[2.03]
Typ.
.440
[11.18]
Related Product Data
Mateable Connectors

Standard Profile Headers,


AMPMODU Wire-Applied .090
Receptacles pages 216-219 [2.29]

Shrouded
AMPMODU MTE Receptacles .240
pages 232, 233, 235 (used with G [6.10]
coupling shroud on page 241) Typ.

Accessories
Barrier Insert page 204 D
.352 .100* Typ.

5
[8.94] [2.54] .100* .125 Dia. Typ.
[2.54] [3.18]
Technical Documents page 276
See mating connector for applicable .050
Typ.
product and application specifications. [1.27]
C
.035.003
Dia. Typ.
[0.890.08]

Recommended PC Board Hole Layout


(for .055 [1.40] min. thick PC board)

*.003 [0.08] tolerances not to accumulate


within one connector pattern.

No. of Dimensions Part Nos.


Pos. A B C D E F G
10 .780 [19.81] .700 [17.78] .400 [10.16] 1.104 [28.04] 1.304 [33.12] .290 [7.37] 87474-1
14 .980 [24.89] .900 [22.86] .600 [15.24] 1.304 [33.12] 1.504 [38.20] .190 [4.83] 87474-9
20 1.280 [32.51] 1.200 [30.48] .900 [22.86] 1.604 [40.74] 1.804 [45.82] .190 [4.83] .890 [22.61] 87474-2
24 1.480 [37.59] 1.400 [35.56] 1.100 [27.94] 1.804 [45.82] 2.004 [50.90] .190 [4.83] 1.090 [27.69] 1-87474-3
26 1.580 [40.13] 1.500 [38.10] 1.200 [30.48] 1.904 [48.36] 2.104 [53.44] .190 [4.83] 1.190 [30.23] 87474-3
34 1.980 [50.29] 1.900 [48.26] 1.600 [40.64] 2.304 [58.52] 2.504 [63.60] .190 [4.83] 1.590 [40.39] 87474-4
40 2.280 [57.91] 2.200 [55.88] 1.900 [48.26] 2.604 [66.14] 2.804 [71.22] .190 [4.83] 1.890 [48.01] 87474-6
50 2.780 [70.61] 2.700 [68.58] 2.400 [60.96] 3.104 [78.84] 3.304 [83.92] .190 [4.83] 2.390 [60.71] 87474-7
60 3.280 [83.31] 3.200 [81.28] 2.900 [73.66] 3.604 [91.54] 3.804 [96.62] .190 [4.83] 2.890 [73.41] 2-87474-6

Note: All part numbers are RoHS compliant.


129
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Standard Profile HeadersShrouded Bulkhead Type; with .066 [1.68] End


Dimension, Double-Row, .100 x .100 [2.54 x 2.45] Centerline
.025 [0.64] Square
.090
Straight Post (with E
[2.29]
Detent Windows and .220 .352
D Typ.
[8.94] C .330
Mounting Ears) [5.59]
Typ. .100
.080
Typ.
.047
[1.19]
.318 [8.38]
Typ. [2.03] .100 [8.08]
[2.54] Typ.
[2.54]

.400 .280
[10.16] [7.11]

.040 .062
.066** R .090
[1.02] Typ. [1.57]
[1.68] [2.29]
Typ. B Typ.
Typ.
.200
Ref.
[5.08]
A (Contact Area)
Material and Finish G
F
Housing Black thermoplastic,
94V-0 rated
Posts Copper alloy, plated .000030
.530
[0.00076] gold over .000050 [0.00127] [13.46]
nickel on entire post .880 .062
[22.35] [1.57]
Thick Panel
Standard Profile Headers,

Related Product Data


Mateable Connectors .080 .288
[2.03] [7.32]
AMPMODU Board Mount Typ.
Shrouded

Receptacles pages 176, 179, 180


.240
AMPMODU Wire-Applied Typ. F
[6.10]
Receptacles pages 216-219 G
AMPMODU MTE Receptacles
pages 228, 229, 234 .235.002
[5.970.05]
AMPMODU MT Receptacles .002
D [0.05]
pages 256, 257 .002
H [0.05]

5 Accessories
Barrier Insert page 204
.440.002
[11.180.05]

.130-.135
Dia. Typ.
[3.30-3.43]
.005
Technical Documents page 276 [0.13]
R Max.
See mating connector for applicable (4 Corners)

product and application specifications. Recommended Panel Cutout


**Both mating faces have same end dimension.

No. of Dimensions
Pos. A B C D E F G H Part Nos.
10 .612 [15.54] .532 [13.51] .400 [10.16] 1.104 [28.04] 1.304 [33.12] .206 [5.23] .632 [16.05] 87608-1
12 .712 [18.08] .632 [16.05] .500 [12.70] 1.204 [30.58] 1.404 [35.66] .206 [5.23] .732 [18.59] 87608-2
20 1.112 [28.24] 1.032 [26.21] .900 [22.86] 1.604 [40.74] 1.804 [45.82] .106 [2.69] .806 [20.47] 1.132 [28.75] 87608-6
24 1.312 [33.32] 1.232 [31.29] 1.100 [27.94] 1.804 [45.82] 2.004 [50.90] .106 [2.69] 1.006 [25.55] 1.332 [33.83] 87608-8
26 1.412 [35.86] 1.332 [33.83] 1.200 [30.48] 1.904 [48.36] 2.104 [53.44] .106 [2.69] 1.106 [28.09] 1.432 [36.37] 87608-9
34 1.812 [46.02] 1.732 [43.99] 1.600 [40.64] 2.304 [58.52] 2.504 [63.60] .106 [2.69] 1.506 [38.25] 1.832 [46.53] 1-87608-3
40 2.112 [53.64] 2.032 [51.61] 1.900 [48.26] 2.604 [66.14] 2.804 [71.22] .106 [2.69] 1.806 [45.87] 2.132 [54.15] 1-87608-6
50 2.612 [66.34] 2.532 [64.31] 2.400 [60.96] 3.104 [78.84] 3.304 [83.92] .106 [2.69] 2.306 [58.57] 2.632 [66.85] 2-87608-1
60 3.112 [79.04] 3.032 [77.01] 2.900 [73.66] 3.604 [91.54] 3.804 [96.62] .106 [2.69] 2.806 [71.27] 3.132 [79.55] 2-87608-6

Note: All part numbers are RoHS compliant.


130
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Standard Profile HeadersShrouded Bulkhead Type; with .150 [3.81] End


Dimension, Double-Row, .100 x .100 [2.54 x 2.45] Centerline
.025 [0.64] Square .090
[2.29]
Straight Post (with D Typ.
.220 .352
Detent Windows and [5.59] [8.94] C
.080
.047 .318
.330
[1.19] [8.38]
Mounting Ears) Typ. .100
Typ. [2.03]
Typ.
Typ. .100 [8.08]
[2.54]
[2.54]

.400 .280
[10.16] [7.11]

.040 .062
.150** R .090
[1.02] Typ. [1.57]
[3.81] [2.29]
Typ. B Typ.
Typ.
.200
Ref.
[5.08]
(Contact Area)
A
G
Material and Finish F
Housing Black thermoplastic,
94V-0 rated
Posts Copper alloy, plated .000030 .530
[13.46]
[0.00076] gold over .000050 [0.00127] .880 .062
nickel on entire post [22.35] [1.57]
Thick Panel

Related Product Data

Standard Profile Headers,


.080 .288
Mateable Connectors [2.03] [7.32]
Typ.
AMPMODU MTE Receptacles

Shrouded
pages 232, 233, 235 (used with .240
Typ. F
[6.10]
coupling shroud on page 241)
G
AMPMODU Wire-Applied
Receptacles pages 216-219
.235.002
[5.970.05]
.002
D [0.05]
.002
H [0.05]

Accessories
Barrier Insert page 204
.440.002
[11.180.05]

.130-.135 Dia. Typ.


[3.30-3.43]
5
.005
[0.13]
Technical Documents page 276 R Max.
(4 Corners)
See mating connector for applicable
product and application specifications.
Recommended Panel Cutout
**Both mating faces have same end dimension.

No. of Dimensions Part Nos.


Pos. A B C D E F G H
10 .780 [19.81] .700 [17.78] .400 [10.16] 1.104 [28.04] 1.304 [33.12] .290 [7.37] .800 [20.32] 87605-1
20 1.280 [32.51] 1.200 [30.48] .900 [22.86] 1.604 [40.74] 1.804 [45.82] .190 [4.83] .890 [22.61] 1.300 [33.02] 87605-6
24 1.480 [37.59] 1.400 [35.56] 1.100 [27.94] 1.804 [45.82] 2.004 [50.90] .190 [4.83] 1.090 [27.69] 1.500 [38.10] 87605-8
26 1.580 [40.13] 1.500 [38.10] 1.200 [30.48] 1.904 [48.36] 2.104 [53.44] .190 [4.83] 1.190 [30.23] 1.600 [40.64] 87605-9
30 1.780 [45.21] 1.700 [43.18] 1.400 [35.56] 2.104 [53.44] 2.304 [58.52] .190 [4.83] 1.390 [35.31] 1.800 [45.72] 1-87605-1
32 1.880 [47.75] 1.800 [45.72] 1.500 [38.10] 2.204 [55.98] 2.404 [61.06] .190 [4.83] 1.490 [37.85] 1.900 [48.26] 1-87605-2
34 1.980 [50.29] 1.900 [48.26] 1.600 [40.64] 2.304 [58.52] 2.504 [63.60] .190 [4.83] 1.590 [40.39] 2.000 [50.80] 1-87605-3
40 2.280 [57.91] 2.200 [55.88] 1.900 [48.26] 2.604 [66.14] 2.804 [71.22] .190 [4.83] 1.890 [48.01] 2.300 [58.42] 1-87605-6
50 2.780 [70.61] 2.700 [68.58] 2.400 [60.96] 3.104 [78.84] 3.304 [83.92] .190 [4.83] 2.390 [60.71] 2.800 [71.12] 2-87605-1
60 3.280 [83.31] 3.200 [81.28] 2.900 [73.66] 3.604 [91.54] 3.804 [96.62] .190 [4.83] 2.890 [73.41] 3.300 [83.82] 2-87605-6

Note: All part numbers are RoHS compliant.


131
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Standard Profile HeadersShrouded Bulkhead Type; with .066/.150 [1.68/3.81]


End Dimension, Double-Row, .100 x .100 [2.54 x 2.45] Centerline
.025 [0.64] Square .200
Ref.
[5.08]
Straight Post (with (Contact Area)
E
Detent Windows and
D
Mounting Ears) .220
.352
.047
.880
[8.94] C [22.35]
[5.59] [1.19]
Typ. .080
[2.03] Typ.
.100
[2.54]

.400 .280
[10.16] [7.11]

.090
.062
.150 R [2.29]
Typ. [1.57]
[3.81] Typ. .318 .330
.040 B Typ.
Typ. [8.08] [8.38]
[1.02] .090
[2.29]
Material and Finish A Typ.
.080
Housing Black thermoplastic, [2.03] G
Typ.
94V-0 rated F

Posts Copper alloy, plated .000030


[0.00076] gold over .000050 [0.00127]
nickel on entire post .289
[7.34]

Related Product Data


Standard Profile Headers,

Mateable Connectors with


.066 [1.68] End Dimension
Shrouded

AMPMODU Board Mount


.062
Receptacles pages 176, 179, 180 [1.57]
AMPMODU Wire-Applied .240 Thick Panel
[6.10] H
Receptacles pages 216-219 Typ. J
AMPMODU MTE Receptacles
pages 228, 229, 234 K

AMPMODU MT Receptacles L
pages 256, 257 .062
.066 .040

5
R [1.68] [1.02]
[1.57] Typ. Typ.
Typ.
Mateable Connectors with
.150 [3.81] End Dimension
.400
AMPMODU MTE Receptacles [10.16]
pages 232, 233, 235 (used with
coupling shroud on page 241)
.047 .080
[2.03] .352 .220
Accessories [1.19]
C [8.94] [5.59]
Typ.
Typ.
Barrier Insert page 204
D

E
Technical Documents page 276
See mating connector for applicable
product and application specifications.
.002
D[0.05]
.235.002
[5.970.05] .002
M [0.05]

.440.002
[11.180.05]

.130-.135 Dia. Typ.


.005 [3.30-3.43]
[0.13]
R Max.
(4 Corners)
Recommended Panel Cutout

132
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Standard Profile HeadersShrouded Bulkhead Type; with .066/.150 [1.68/3.81]


End Dimension, Double-Row, .100 x .100 [2.54 x 2.45] Centerline (Continued)

No. of Dimensions
Part Nos.
Pos. A B C D E F
10 .780 [19.81] .700 [17.78] .400 [10.16] 1.104 [28.04] 1.304 [33.12] .290 [7.37] 87496-2
20 1.280 [32.51] 1.200 [30.48] .900 [22.86] 1.604 [40.74] 1.804 [45.82] .190 [4.83] 87496-7
24 1.480 [37.59] 1.400 [35.56] 1.100 [27.94] 1.804 [45.82] 2.004 [50.90] .190 [4.83] 87496-9
26 1.580 [40.13] 1.500 [38.10] 1.200 [30.48] 1.904 [48.36] 2.104 [53.44] .190 [4.83] 1-87496-0
30 1.780 [45.21] 1.700 [43.18] 1.400 [35.56] 2.104 [53.44] 2.304 [58.52] .190 [4.83] 1-87496-2
34 1.980 [50.29] 1.900 [48.26] 1.600 [40.64] 2.304 [58.52] 2.504 [63.60] .190 [4.83] 1-87496-4
40 2.280 [57.91] 2.200 [55.88] 1.900 [48.26] 2.604 [66.14] 2.804 [71.22] .190 [4.83] 1-87496-7
50 2.780 [70.61] 2.700 [68.58] 2.400 [60.96] 3.304 [83.92] 3.304 [83.92] .190 [4.83] 87496-1
60 3.280 [83.31] 3.200 [81.38] 2.900 [73.66] 3.604 [91.54] 3.804 [96.62] .190 [4.83] 2-87496-6

No. of Dimensions
Part Nos.
Pos. G H J K L M
10 .206 [5.23] .612 [15.54] .532 [13.51] .632 [16.05] 87496-2
20 .890 [22.61] .106 [2.69] .806 [20.47] 1.112 [28.24] 1.032 [26.21] 1.132 [28.75] 87496-7
24 1.090 [27.69] .106 [2.69] 1.006 [25.55] 1.312 [33.32] 1.232 [31.29] 1.332 [33.83] 87496-9
26 1.190 [30.23] .106 [2.69] 1.106 [28.09] 1.412 [35.86] 1.332 [33.83] 1.432 [36.37] 1-87496-0
30 1.390 [35.31] .106 [2.69] 1.306 [33.17] 1.612 [40.94] 1.532 [38.91] 1.632 [41.45] 1-87496-2
34 1.590 [40.39] .106 [2.69] 1.506 [38.25] 1.812 [46.02] 1.732 [43.99] 1.832 [46.53] 1-87496-4

Standard Profile Headers,


40 1.890 [48.01] .106 [2.69] 1.806 [45.87] 2.112 [53.64] 2.032 [51.61] 2.132 [54.15] 1-87496-7
50 2.390 [60.71] .106 [2.69] 2.306 [58.57] 2.612 [66.34] 2.532 [64.31] 2.632 [66.85] 87496-1

Shrouded
60 2.890 [73.41] .106 [2.69] 2.806 [71.27] 3.112 [79.04] 3.032 [77.01] 3.132 [79.55] 2-87496-6

Note: All part numbers are RoHS compliant.


133
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

AMP-LATCH Low Profile HeadersShrouded

Product Facts
Available in selected
positions 10 thru 60
Flame retardant,
thermoplastic housings,
94V-0 rated
Vertical and right-angle
versions available in double
row configurations
Available in .025 [0.64]
square drawn wire posts
Wash out clearance for flux
removal
Mates with AMP-LATCH
Ribbon Cable Connectors
Available with and without
eject latches
Available with and without
kinked soldertails for PCB
retention
Recognized under the
Component Program of
Low Profile Headers,

Underwriters
Laboratories Inc.
Shrouded

File No. E28476


Certified by Canadian Performance
Standards Characteristics
Association, R

Electrical
File No. LR 7189
Insulation Resistance 5,000
megohms minimum initial

5 Dielectric Withstanding Voltage


1,000 V rms at sea level

Environmental
Operating Temperature
-65C to +105C
Current 1 ampere maximum
per contact

134
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

AMP-LATCH Low Profile HeadersShrouded, with .150 [3.81] End


Dimension, Double-Row, .100 x .100 [2.54 x 2.54] Centerline
.025 [0.64] Square A
Straight Post .045 (2 Plc.)
[1.14]
B

.165 .075.002
(2 Plc.)
[4.19] [1.910.05]

.360
[9.14]

.015
Material and Finish .130 .025.001 .010
.100
Housing Glass-filled nylon, black, [3.30] [0.640.03] [ ]
0.38
0.25 [2.54]
Typ.
94V-0 rated
Posts Copper alloy, plated as follows:
Plating A Gold flash over .000030
[0.00076] min. palladium-nickel plate .200 (Contact
on the mating surfaces, .000100 [5.08] Area)
[0.00254] min. tin plate on soldertails, .040
with entire post underplated .000050 .035
[0.00127] min. nickel [ ]
1.02
0.89 .385
Plating B Gold flash over .000015 [9.78] .120.015
[0.00038] min. palladium-nickel plate

Low Profile Headers,


[3.050.38]
on the mating surfaces, .000100 .240
[0.00254] min. tin plate on soldertails, [6.10]

Shrouded
.020
with entire post underplated .000050 .015
[0.00127] min. nickel [ ]
0.51
0.38
.100
[2.54]
.185.010 .185
[4.700.25] [4.70] Typ.

Related Product Data


Electrical Characteristics
page 134
Mateable Connectors

5
.100.003*
Typ.
[2.540.08]
AMPMODU Wire-Applied
Receptacles page 220
AMPMODU Board Mount
Receptacles pages 179, 180
Short Point Wire-Applied .100.003*
Connectors page 224 [2.540.08] .040.003
[1.020.08]
Dia. Typ.

Recommended PC Board Hole Layout


For Manual Insertion
*.003 [0.08] tolerances not to accumulate
within one connector pattern.

No. of Dimensions Post Plating/Part Nos.


Pos. A B Plating A Plating B
10 .800 [20.32] .400 [10.16] 5103309-1 5103308-1
14 1.000 [25.40] .600 [15.24] 5103309-2 5103308-2
16 1.100 [27.94] .700 [17.78] 5103309-3 5103308-3
20 1.300 [33.02] .900 [22.86] 5103309-5 5103308-5
24 1.400 [35.56] 1.100 [27.94] 1-5103308-3
26 1.600 [40.64] 1.200 [30.48] 5103309-6 5103308-6
34 2.000 [50.80] 1.600 [40.64] 5103309-7 5103308-7
40 2.300 [58.42] 1.900 [48.26] 5103309-8 5103308-8
50 2.800 [71.12] 2.400 [60.96] 1-5103309-0 1-5103308-0
60 3.300 [83.82] 2.900 [73.66] 1-5103308-2

Note: All part numbers are RoHS compliant.


135
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

AMP-LATCH Low Profile HeadersShrouded, with .150 [3.81] End


Dimension, Double-Row, .100 x .100 [2.54 x 2.54] Centerline (Continued)
.025 [0.64] Square
Right-Angle Post Position No.1
Indicator


.385
[9.77]

.165
[4.19]
.025.001
Typ.
[0.640.03]

Material and Finish


A
Housing Glass-filled nylon, black, .1975
[5.016]
94V-0 rated B
.045 .240
Posts Copper alloy, plated as follows: [1.14]
(2 Plc.) [6.09]
+.008 .200
Plating A Gold flash over .000030 .153 -.005 [5.08]
(contact area)
.130
[0.00076] min. palladium-nickel plate [3.88 +.203 ] [3.30]
Typ.
-.127 .100
on the mating surfaces, .000100 2 Plc. [2.54]
[0.00254] min. tin plate on soldertails,
with entire post underplated .000050 .025.001
.360 [.6350.03]
[0.00127] min. nickel [9.14] Typ.
.135+.020
Plating B Gold flash over .000015 -.010
[0.00038] min. palladium-nickel plate [ 3.42+0.51 ]
Low Profile Headers,

.130
.075.002 -0.25
on the mating surfaces, .000100 [3.30]
[1.900.05]
[0.00254] min. tin plate on soldertails,
Shrouded

with entire post underplated .000050 .185.010 .185 .010


[4.690.25] Typ. [0.25]
[4.69] .100
[0.00127] min. nickel Typ. [2.54]
.123
[3.12]

Related Product Data


Electrical Characteristics
.100.003*
page 134 [2.540.08] Typ.
Mateable Connectors

5 AMPMODU Wire-Applied
Receptacles page 220
Short Point Wire-Applied
Connectors page 224
.100.003*
[2.540.08]
.035.003
[0.890.08]
Dia. Typ.

Recommended PC Board Hole Layout


For Manual Insertion

*.003 [0.08] tolerances not to accumulate


within one connector pattern.

No. of Dimensions Post Plating/Part Nos.


Pos. A B Plating A Plating B
10 .800 [20.32] .400 [10.16] 5103311-1 5103310-1
14 1.000 [25.40] .600 [15.24] 5103311-2 5103310-2
16 1.100 [27.94] .700 [17.78] 5103311-3 5103310-3
20 1.300 [33.02] .900 [22.86] 5103311-5 5103310-5
26 1.600 [40.64] 1.200 [30.48] 5103311-6 5103310-6
34 2.000 [50.80] 1.600 [40.64] 5103311-7 5103310-7
40 2.300 [58.42] 1.900 [48.26] 5103311-8 5103310-8
50 2.800 [71.12] 2.400 [60.96] 1-5103311-0 1-5103310-0
60 3.300 [83.82] 2.900 [73.66] 1-5103311-2

Note: All part numbers are RoHS compliant.


136
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

AMP-LATCH Low Profile HeadersShrouded, with .150 [3.81] End


Dimension, Double-Row, .100 x .100 [2.54 x 2.54] Centerline &
Kinked Soldertails for PCB Retention
.025 [0.64] Square
Straight Post (with Board A
Retention Feature) .045
[1.14]
.153+.008 B
.153 -.005
[3.88+0.20 ]
.15 -
0.13
(2 Plc.) .075.002
.165
[1.910.05] (2 Plc.)
[4.19]

.365
[9.27]

Material and Finish


.025
Housing Glass-filled PPA, black, .140 .025.001 .020
94V-0 rated [3.56] [0.640.03] [ ] 0.64
0.51 .100
Typ. [2.54]
Posts Copper alloy, plated with gold
flash over .000015 [0.00038] min. .200 (Contact Area)
palladium-nickel plate on the mating [5.08]
surfaces, .000100 [0.00254] min. tin
plate on soldertails, with entire post .040
.035
underplated .000050 [0.00127] min.
nickel [ ]
1.02
0.89 .385 .120.015
[9.78] [3.050.38]

Low Profile Headers,


.240
Related Product Data

Shrouded
[6.10]
.020
Electrical Characteristics .015
page 134 [ ]
0.51 .100
0.38 [2.54]
Mateable Connectors .185.010 .185
AMPMODU Wire-Applied [4.690.25] [4.69]
Receptacles page 220
AMPMODU Board Mount .100.003*
Typ.
Receptacles pages 179, 180 [2.540.08]

5
Short Point Wire-Applied
Connectors page 224

*Reflow solder process compatible .100.003*


[2.540.08] .040.003
[1.020.08]
Dia. Typ.

Recommended PC Board Hole Layout


For Manual Insertion
*.003 [0.08] tolerances not to accumulate
within one connector pattern.

No. of Dimensions Post Plating


Pos. A B Part Nos.
10 .800 [20.32] .400 [10.16] 5104338-1
14 1.000 [25.40] .600 [15.24] 5104338-2
16 1.100 [27.94] .700 [17.78] 5104338-3
20 1.300 [33.02] .900 [22.86] 5104338-4
24 1.400 [35.56] 1.100 [27.94] 5104338-5
34 2.000 [50.80] 1.600 [40.64] 5104338-7
40 2.300 [58.42] 1.900 [48.26] 5104338-8
50 2.800 [71.12] 2.400 [60.96] 5104338-9
60 3.300 [83.82] 2.900 [73.66] 1-5104338-0

Note: All part numbers are RoHS compliant.


137
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

AMP-LATCH Low Profile HeadersShrouded, with .150 [3.81] End


Dimension, Double-Row, .100 x .100 [2.54 x 2.54] Centerline &
Kinked Soldertails for PCB Retention (Continued)
.025 [0.64] Square Position No.1
Indicator
Right-Angle Post (with
Board Retention Feature)

.385
[9.77]

.165
[4.19] .025.001
[0.640.03] Typ.

B
.200 .240
[5.08] [6.09]
+.008
.153 .045 (contact area) .200
-.005 (2 Plc.)
Material and Finish [
3.88
+0.20
]
[1.14]
.130
[5.08]
-0.13 Typ.
[3.30]
Housing Glass-filled PPA, black, 2 Plc.
.100
94V-0 rated [2.54]
.025.001
Posts Copper alloy, plated with gold .370 .025 [.6350.03]
[9.40] .020 +.020
flash over .000015 [0.00038] min. Typ. .125
palladium-nickel plate on the mating [ ]
0.64
0.50
-.010
+0.51
[3.18
-0.25 ]
surfaces, .000100 [0.00254] min. tin .140
plate on soldertails, with entire post [3.56] .075.002
Low Profile Headers,

[1.900.05]
underplated .000050 [0.00127] min. .185.010 .185 2 Plc.
[4.690.25] Typ.
nickel Typ. [4.69] .100
Shrouded

[2.54]
.123
[3.12]
Related Product Data
Electrical Characteristics .100.003*
[2.540.08] Typ.
page 134
Mateable Connectors
AMPMODU Wire-Applied
Receptacles page 220

5 Short Point Wire-Applied


Connectors page 224
.100.003*
[2.540.08] .040.003
[1.020.08]
Dia. Typ.

Recommended PC Board Hole Layout


For Manual Insertion
*.003 [0.08] tolerances not to accumulate
within one connector pattern.

No. of Dimensions Post Plating


Pos. A B Part Nos.
10 .800 [20.32] .400 [10.16] 5104340-1
14 1.000 [25.40] .600 [15.24] 5104340-2
16 1.100 [27.94] .700 [17.78] 5104340-3
20 1.300 [33.02] .900 [22.86] 5104340-4
40 2.300 [58.42] 1.900 [48.26] 5104340-8
50 2.800 [71.12] 2.400 [60.96] 5104340-9

Note: All part numbers are RoHS compliant.


138
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Universal Ejection Style Pin Headers, Military, Center and Dual Polarized,
.100 x .100 [2.54 x 2.54] Centers
.100
Straight-Thru, 4-Sided [2.54]
.150
.025 [0.64] Sq. Posts [3.81] .165
.253 .190 .240
[4.19] [4.83]
[6.43] [6.10] .025
[0.64]
.100
[2.54]
.336 .315
[8.53] [8.00]

.150 .050 .025 .107


[3.81] [1.27] .289
[0.64] [2.72]
A [7.34] E
B Solder Tail
Typ.
C
Pin Header
Position No.1
with Latches Indicator .025 .096
[0.64] [2.44] Dia.
2 Plc.

.549 .106
[13.94] [2.74]

Note: Used with Header (optional)


D .195 Latch (sold separately)
[4.95] Part Number 1825851-1
Pin Header

Universal Ejection Style


without Latches
No. of Dimensions Part Number
Material and Finish Positions (Without Latches)

Pin Headers
A B C D E
Housing & Latches Black .700 1.100 1.260 .860 .110 [2.79] 5102154-1
10
thermoplastic, 94V-0 rated 17.78 27.94 32.00 21.84 .155 [3.94] 5102156-1
Contacts Brass or phosphor bronze .900 1.300 1.460 1.060 .110 [2.79] 5102154-2
14
(at TEs option); Duplex .000030 22.86 33.02 37.08 26.92 .155 [3.94] 5102156-2
[0.00076] gold on mating end, .000100 1.000 1.400 1.560 1.180 .110 [2.79] 5102154-3
16
[0.00254] min. tin on termination end, 25.40 35.56 39.62 29.46 .155 [3.94] 5102156-3
with entire contact underplated .000050 1.200 1.600 1.760 1.360 .110 [2.79] 5102154-4
[0.00127] nickel 20 30.48 40.64 44.70 34.54 .155 [3.94] 5102156-4

Related Product Data


Electrical Characteristics
24

26
1.400
35.56
1.500
38.10
1.800
45.72
1.900
48.26
1.960
49.78
2.060
52.32
1.560
39.62
1.660
42.16
.110 [2.79]
.155 [3.94]
.110 [2.79]
.155 [3.94]
5102154-5
5102156-5
5102154-6
5102156-6
5
page 134
1.900 2.300 2.460 2.060 .110 [2.79] 5102154-8
Mateable Connectors 34 48.26 58.42 62.48 52.32 .155 [3.94] 5102156-8
AMPMODU Wire-Applied .110 [2.79] 5102154-9
2.200 2.600 2.760 2.360
Receptacles page 220 40 55.88 66.04 70.10 59.94 .155 [3.94] 5102156-9
2.700 3.100 3.260 2.860 .110 [2.79] 1-5102154-0
50 68.58 78.74 82.80 72.64 .155 [3.94] 1-5102156-0
Mounting Information Notes: 1. Pin headers in 10- and 14-position sizes have only one slot for snap-in polarizer (military polarization),
located as shown.
4-24 self-tapping screws Notes: 2. Pin headers in 10-position size have only slot for dual polarization, located as shown.
and 2-56 bolts and nuts are
available for mounting Latch
straight-thru pin headers of (See Note at left.)
pc boards. Typical applica-
2-56
tions and part nos. for Bolt & Nut
ordering this hardware are (2 Each Reqd.)
presented below.
4-24 .256
Note: 2-56 bolts and nuts may be Self-Tapping [6.50]
used to mount pin headers with and Screw
without latches. If latches are to be (2 Reqd.)
used, the bolts must be positioned in
the pin header before the latches are
installed.
Pin Header Mounting using 4-24 Self-Tapping Screws: Pin Header Mounting with 2-56 Bolts and Nuts:
Part No. 19156-1 (for .062 [1.57] Thick PC Board) Part No. 746383-1 (Bolt Only)
Note: All part numbers are RoHS Part No. 19156-2 (for .093 [2.36] Thick PC Board) Kit No. 102198-1 (Bolt and Nut, 2 Each per Kit)
compliant. Part No. 19156-3 (for .125 [3.18] Thick PC Board)
139
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Universal Ejection Style Pin Headers, Military, Center and Dual Polarized,
.100 x .100 [2.54 x 2.54] Centers (Continued)

Right-Angle, 4-Sided .100


[2.54]
.025
[0.64] Dia. .038
.025 [0.64] Sq. Posts .165 .100 [0.97]
.253 [4.19] .190 [2.54] E
.150 Typ.
[6.43] [4.83] .240
[3.81]
[6.10]
.100
[2.54]
Solder Tail
.336 .315
[8.53] [8.00]

.025 .107
.289
.150 .050 [0.64] [2.72]
[7.34]
[3.81] [1.27]
A
B
C
.025
Pos. No. 1 Indicator [0.64]
Pin Header
with Latches .096
[2.44]

.549
[13.94] .108
[2.74]

.195 Note: Used with Header (optional)


[4.95] Latch (sold separately)
Part Number 1825851-1
Universal Ejection Style

No. of Dimensions Part Number


Pin Headers

Pin Header
Positions A B C D E (Without Latches)
without Latches
.700 1.100 1.260 .860 .110 [2.79] 5102160-1
Material and Finish 10 17.78 27.94 32.00 21.84 .155 [3.94] 5102162-1
Housing & Latches Black .900 1.300 1.460 1.060 .110 [2.79] 2-5102160-2*
14
thermoplastic, 94V-0 rated 22.86 33.02 37.08 26.92 .155 [3.94] 2-5102162-2*
Contacts Brass or phosphor bronze 1.000 1.400 1.560 1.180 .110 [2.79] 5102160-3
16
(at TEs option); Duplex .000030 25.40 35.56 39.62 29.46 .155 [3.94]
[0.00076] gold on mating end, .000100 1.200 1.600 1.760 1.360 .110 [2.79] 5102160-4

5
[0.00254] min. tin on 20 30.48 40.64 44.70 34.54 .155 [3.94]
termination end, with entire contact .110 [2.79] 5102160-5
1.400 1.800 1.960 1.560
underplated .000050 [0.00127] nickel 24 35.56 45.72 49.78 39.62 .155 [3.94]
1.500 1.900 2.060 1.660 .110 [2.79] 5102160-6
26
Related Product Data 38.10 48.26 52.32 42.16 .155 [3.94] 2-5102162-6*
1.900 2.300 2.460 2.060 .110 [2.79] 5102160-8
Electrical Characteristics 34 48.26 58.42 62.48 52.32 .155 [3.94] 5102162-8
page 134
2.200 2.600 2.760 2.360 .110 [2.79] 5102160-9
Mateable Connectors 40 55.88 66.04 70.10 59.94 .155 [3.94]
AMPMODU Wire-Applied
2.700 3.100 3.260 2.860 .110 [2.79] 1-5102160-0
Receptacles page 220 50 68.58 78.74 82.80 72.64 .155 [3.94] 1- 5102162-0
Mounting Information Notes: 1. Pin headers in 10- and 14-position sizes have only one slot for snap-in polarizer (military polarization),
located as shown.
4-24 self-tapping screws Notes: 2. Pin headers in 10-position size have only slot for dual polarization, located as shown.
and 2-56 bolts and nuts are *Blue housing. Latch
available for mounting (See Note at left.)
straight-thru pin headers of
pc boards. Typical applica- 2-56
Bolt & Nut
tions and part nos. for (2 Each Reqd.)
ordering this hardware are
presented below. 4-24 .256
Self-Tapping [6.50]
Note: 2-56 bolts and nuts may be Screw
used to mount pin headers with and (2 Reqd.)
without latches. If latches are to be
used, the bolts must be positioned in
the pin header before the latches are
installed. Pin Header Mounting using 4-24 Self-Tapping Screws: Pin Header Mounting with 2-56 Bolts and Nuts:
Part No. 19156-1 (for .062 [1.57] Thick PC Board) Part No. 746383-1 (Bolt Only)
Note: All part numbers are RoHS Part No. 19156-2 (for .093 [2.36] Thick PC Board) Kit No. 102198-1 (Bolt and Nut, 2 Each per Kit)
compliant. Part No. 19156-3 (for .125 [3.18] Thick PC Board)
140
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

AMPMODU Stacking ConnectorsShrouded,


.025 x .025 [0.64 x 0.64] Posts
Product Facts
Parallel PC board stacking
without use of mother boards
Provides space between
boards for interference-free
routing of wire-to-board
connections
Two header heights
available: .785 [19.94] and
1.200 [30.48]
Vertical mount headers are
fully shrouded
Receptacle contacts have
dual cantilever beams with
built-in overstress protection
.025 [0.64] sq. posts and
receptacle contacts on
double-row, .100 x .100
[2.54 x 2.54] centers
Header posts and receptacle
contacts are phosphor
bronze, duplex plated

Shrouded Stacking
Housings are made of

Headers
flame retardant, glass-filled
thermoplastic
AMPMODU stacking AMPMODU receptacle
connectors are a two-piece contact design; dual
interconnection system cantilever beams with built-
designed for parallel in overstress protection.
stacking printed circuit Headers are available in
boards, without the use of
mother boards.
Vertical mount headers and
two heights: .785 [19.94]
and 1.200 [30.48]. This
allows the customer to
5
receptacle assemblies use the height of the header
feature duplex plated posts to keep wire-to-board
and receptacle contacts on connections up and
a double-row, .100 x .100 away from other board
[2.54 x 2.54] grid. The .025 components, particularly if
[ 0.64] sq. header posts are the components are densely
more protected, and the packaged around the
top-entry receptacle header.
contacts utilize the proven

141
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Receptacle Assemblies, Double-Row Board Mounted

Vertical Mount, Top Entry, A


High Profile, Selectively .050
Loaded (with Standoffs) B [1.27]

.100
[2.54] .100
[2.54]

.238
[6.05]

Material and Finish


Housing Glass-filled thermoplastic, Post Entry
black, 94V-0 rated
Contacts Phosphor bronze, plated
.000010 [0.000254] min. gold on mating .175
area, .000150-.000300 [0.00381- .025 [4.45]
.320
0.00762] matte tin on solder area, with [8.13]
[0.64]
entire contact underplated .000050-
.000100 [0.00127-0.00254] nickel

.020
[0.51] .100
(Standoffs) .115
[2.54] [2.92]
Shrouded Stacking
Headers

B
.100* Typ.
[2.54] .035.003
Dia.
[0.890.08]

.100*
[2.54]

5 Recommended PC Board Hole Layout


*.003 [0.08] tolerances not to accumulate
within one connector pattern.

Dimensions Receptacle
No. of Assembly
Pos. A B Part No.
48* 2.400 [60.96] 2.300 [58.42] 5-102766-1
(40 Active)
60*
(52 Active) 3.000 [76.2] 2.900 [73.66] 5-102766-4

*In addition to the active positions, each receptacle has four cavities on each
end that are not loaded with contacts. These empty cavities aid in aligning
the receptacle with header posts during mating.
Notes: 1. Part no. and date code stamped on housing where size permits.
Notes: 2. These receptacle assemblies mate with headers of the same
size as the active positions listed above. Refer to pages 143 and
144.

Note: All part numbers are RoHS compliant.


142
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Headers, Double-Row, .785 [19.94] Height

.025 x .025 [0.64 x 0.64] .320 .090


Straight Post (with [8.13] [2.29]
.100
.124
[3.15]
Typ.
Pin Protection) [2.54]

.348
[8.84]

.100
[2.54]

Material and Finish


Housing Glass-filled thermoplastic,
A
black, 94V-0 rated
Contacts Phosphor bronze, plated B
.025
.000015 [0.000381] min. gold on mating .250 .103 [0.64]
area, .000100-.000200 [0.00254- [3.81] C
[2.62] Sq. Posts
0.00508] matte tin on solder area, with .103 Dia. .070
[2.62] [1.78]
entire post underplated .000050 (at Surface)
[0.00127] nickel

.340 .380
[8.64] [9.65]
.450
Min.
[11.43]
.785
[19.94]

Shrouded Stacking
.099 .275
Dia.
[2.51] [6.99]

Headers
(at .340
[8.64] Depth)

.025
.265
.084 [0.64]
[6.73]
[2.13] Sq. Posts
D .268
[6.81]

.250.003
[3.810.08]
B 5
.100* .043.005
.050.003 Dia. .125
[2.54] [1.090.13]
[1.270.08] Typ. [3.18]
Dia.

.100*
[2.54] C

Recommended PC Board Hole Layout


*.003 [0.08] tolerances not to accumu-
late within one connector pattern.

No. of Dimensions Header


Pos. A B C D Part No.
40 2.720 [69.09] 2.400 [60.96] 1.900 [48.26] 2.430 [61.27] 5-102871-2
52 3.320 [84.33] 3.000 [76.2] 2.500 [63.5] 3.030 [76.96] 5-102871-1
Note: These headers mate with receptacle assemblies having the same number of active positions. See page 142.

Note: All part numbers are RoHS compliant.


143
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Headers, Double-Row, 1.200 [30.48] Height

.025 x .025 [0.64 x 0.64] .320 .090


[8.13] [2.29] .124
Straight Post (with [3.15]
.100
Pin Protection) [2.54]
Typ.

.348
[8.84]

.100
[2.54]

Material and Finish


Housing Glass-filled thermoplastic, A
black, 94V-0 rated .250
[6.35] B
Contacts Phosphor bronze, plated .025
.098
.000015 [0.000381] min. gold on mating C [2.49] [0.64]
area, .000100-.000200 [0.00254- .077
Dia. .250 .040
Sq. Posts
[1.96]
0.00508] matte tin on solder area, with (at Surface)
[6.35] [1.02]
entire post underplated .000050
[0.00127] nickel
.340 .350
[8.64] [8.89]
Min.
.865
[21.97]
Shrouded Stacking

1.200
[30.48]
.073
Dia.
Headers

[1.85] .060
(at .340 [8.64] [1.52] .275
Depth)
[6.99]

.265 .084 .025


[6.73] [2.13] [0.64]
Sq. Posts

5
D .268
[6.81]

B
.250.003
[3.810.08] .100* .043.005
.050.003 [2.54] [1.090.13] .125
[1.270.08] Typ. [3.18]
Dia.

.100*
[2.54] C

Recommended PC Board Hole Layout


*.003 [0.08] tolerances not to accumu-
late within one connector pattern.

No. of Dimensions Header


Pos. A B C D Part No.
52 3.320 [84.33] 3.000 [76.2] 2.500 [63.5] 3.030 [76.96] 5-102826-1
Note: This header mates with receptacle assembly having the same number of active positions. See page 142.

Note: All part numbers are RoHS compliant.


144
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

ACTION PIN HeadersShrouded and Unshrouded

Product Facts
Straight posted unshrouded
and shrouded versions
.025 [0.64] square
ACTION PIN posts
ACTION PIN posts make a
gas-tight, press-fit connec-
tion in plated-through holes
Designed not to damage
plated-through holes
Unshrouded headers
available in selected sizes
1 through 40 positions
(single-row) and 4 through
80 positions (double-row)
Shrouded headers (double-
row) available in selected
sizes of 6 through 60
positions
Flame retardant, black
thermoplastic housings,
94V-0 rated

ACTION PIN Headers


.100 [2.54] Centerline
spacing
Recognized under the
Component Program of
Underwriters
Laboratories Inc., R

File No. E28476


Certified by Canadian
Standards
Association,
File No. LR 16455
R

145
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

ACTION PIN HeadersUnshrouded, Single-Row,


.100 [2.54] Centerline
.025 [0.64] Square A
.050
[1.27]
Straight Post Max.
B .092
.100 [2.34]
Typ.
[2.54]

.200
Ref.
[5.08] .320
(Contact Area) [8.13]

.090
[2.29] .250
[6.35]

.042
Material and Finish [1.07]
Typ.
Housing Black thermoplastic, 94V-0
rated
Posts Copper alloy, duplex plated B
.000030 [0.00076] gold on contact area, See page 168 for
.100* Recommended PC Board Hole Layout
hole dimensions
.000100-.000200 [0.00254-0.00508] [2.54]
*.003 [0.08] tolerances not to accumulate
matte tin on termination end, with entire within one connector pattern.
post underplated .000050 [0.00127]
nickel

Part Nos.
Related Product Data Dimensions
ACTION PIN Headers,

No. of For .062 For .093-.125


Mateable Connectors Pos. A B [1.57] [.236-3.18]
Unshrouded

Refer to the Mating Post Selection Thick PC Boards Thick PC Boards


Guide page 90 1 .084 [2.13] 8-103336-5 8-102898-5
ACTION PIN Posts pages 150, 151 2 .184 [4.67] .100 [2.54] 8-103336-4 8-102898-4
3 .284 [7.21] .200 [5.08] 9-103336-0 9-102898-0
Application Tooling page 152
4 .384 [9.75] .300 [7.62] 8-103336-6 8-102898-6
5 .484 [12.29] .400 [10.16] 8-103336-8 8-102898-8
Technical Documents page 276 6 .584 [14.83] .500 [12.70] 8-103336-7 8-102898-7
7 .684 [17.37] .600 [15.24] 8-103336-9 8-102898-9
See mating connector for applicable

5 product and application specifications 8 .784 [19.91] .700 [17.78] 5-103336-1 5-102898-1
9 .884 [22.45] .800 [20.32] 5-103336-2 5-102898-2
10 .984 [24.99] .900 [22.86] 5-103336-3 5-102898-3
11 1.084 [27.53] 1.000 [25.40] 5-103336-4 5-102898-4
12 1.184 [30.07] 1.100 [27.94] 5-103336-5 5-102898-5
13 1.284 [32.61] 1.200 [30.48] 5-103336-6 5-102898-6
14 1.384 [35.15] 1.300 [33.02] 5-103336-7 5-102898-7
15 1.484 [37.69] 1.400 [35.56] 5-103336-8 5-102898-8
16 1.584 [40.23] 1.500 [38.10] 5-103336-9 5-102898-9
17 1.684 [42.77] 1.600 [40.64] 6-103336-0 6-102898-0
18 1.784 [45.31] 1.700 [43.18] 6-103336-1 6-102898-1
19 1.884 [47.85] 1.800 [45.72] 6-103336-2 6-102898-2
20 1.984 [50.39] 1.900 [48.26] 6-103336-3 6-102898-3
21 2.084 [52.93] 2.000 [50.80] 6-102898-4
22 2.184 [55.47] 2.100 [53.34] 6-102898-5
23 2.284 [58.01] 2.200 [55.88] 6-102898-6
24 2.384 [60.55] 2.300 [58.42] 6-102898-7
25 2.484 [63.09] 2.400 [60.96] 6-103336-8 6-102898-8
26 2.584 [65.63] 2.500 [63.50] 6-102898-9
27 2.684 [68.17] 2.600 [66.04] 7-102898-0
28 2.784 [70.71] 2.700 [68.58] 7-102898-1
29 2.884 [73.25] 2.800 [71.12] 7-102898-2
30 2.984 [75.79] 2.900 [73.66] 7-103336-3 7-102898-3
32 3.184 [80.87] 3.100 [78.74] 7-103336-5 7-102898-5
36 3.584 [91.03] 3.500 [88.90] 7-103336-9 7-102898-9
40 3.984 [101.19] 3.900 [99.06] 8-103336-3 8-102898-3
Note: To insert header into PC board, use seating tool with arbor tool or air powered machinepage 152.

Note: All part numbers are RoHS compliant.


146
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

ACTION PIN HeadersUnshrouded, Double-Row,


.100 x .100 [2.54 x 2.54] Centerline
.025 [0.64] Square
.050
Straight Post A [1.27]
Max.
.100
B
.100 [2.54]
Typ.
[2.54]
.200
Ref.
[5.08] .320
(Contact Area) [8.13]

.090
[2.29] .250
[6.35]

.042
[1.07] .192
(2 Plc.)
Material and Finish [4.88]

Housing Black thermoplastic, 94V-0


rated B
.100* .100*
Posts Copper alloy, duplex plated [2.54] [2.54]
.000030 [0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
matte tin on termination end, with entire
post underplated .000050 [0.00127] See page 151 for
nickel hole dimensions

ACTION PIN Headers,


Recommended PC Board Hole Layout
Related Product Data

Unshrouded
*.003 [0.08] tolerances not to accumulate
Mateable Connectors within one connector pattern.
Refer to the Mating Post Selection
Guide page 90
ACTION PIN Posts pages 150, 151
Application Tooling page 152 Part Nos.
No. of Dimensions For .093-.125
For .062 [1.57]
Pos. A B [.236-3.18]
Thick
Accessories Thick

5
PC Boards PC Boards
Barrier Insert page 204 4 .184 [4.67] .100 [2.54] 5-103542-1 5-103233-1
6 .284 [7.21] .200 [5.08] 5-103542-2 5-103233-2
8 .384 [9.75] .300 [7.62] 5-103542-3 5-103233-3
Technical Documents page 276 10 .484 [12.29] .400 [10.16] 5-103542-4 5-103233-4
See mating connector for applicable 12 .584 [14.83] .500 [12.70] 5-103542-5 5-103233-5
product and application specifications 14 .684 [17.37] .600 [15.24] 5-103542-6 5-103233-6
16 .784 [19.91] .700 [17.78] 5-103542-7 5-103233-7
18 .884 [22.45] .800 [20.32] 5-103542-8 5-103233-8
20 .984 [24.99] .900 [22.86] 5-103542-9 5-103233-9
22 1.084 [27.53] 1.000 [25.40] 6-103542-0 6-103233-0
24 1.184 [30.07] 1.100 [27.94] 6-103542-1 6-103233-1
26 1.284 [32.61] 1.200 [30.48] 6-103542-2 6-103233-2
28 1.384 [35.15] 1.300 [33.02] 6-103542-3 6-103233-3
30 1.484 [37.69] 1.400 [35.56] 6-103542-4 6-103233-4
32 1.584 [40.23] 1.500 [38.10] 6-103542-5 6-103233-5
34 1.684 [42.77] 1.600 [40.64] 6-103542-6 6-103233-6
36 1.784 [45.31] 1.700 [43.18] 6-103542-7 6-103233-7
38 1.884 [47.85] 1.800 [45.72] 6-103542-8 6-103233-8
40 1.984 [50.39] 1.900 [48.26] 6-103542-9 6-103233-9
42 2.084 [52.39] 2.000 [50.80] 7-103542-0 7-103233-0
46 2.284 [58.01] 2.200 [55.88] 7-103542-2
50 2.484 [63.09] 2.400 [60.96] 7-103542-4 7-103233-4
60 2.984 [75.79] 2.900 [73.66] 7-103542-9 7-103233-9
66 3.284 [83.41] 3.200 [81.28] 8-103542-2
80 3.984 [101.19] 3.900 [99.06] 8-103542-9 8-103233-9

Note: All part numbers are RoHS compliant.


147
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

ACTION PIN HeadersShrouded with .066 [1.68] End Dimension,


Double-Row, .100 x .100 [2.54 x 2.54] Centerline
.025 [0.64] Square .066
[1.68]
Straight Post (with Detent (2 Plc.) .040
B [1.02] .320
Windows, for .093-.125 C (3 Plc.) .200 [8.13]
.100 Ref. .250
[.236-3.18] Thick PC Board) .100 Typ.
[2.54]
[5.08]
[6.35]
[2.54] (Contact Area)

.400
[10.16]

.090 .090
[2.29] [2.29]
A
(2 Plc.)

E
.240
D [6.10]
(2 Plc.)

Material and Finish


.440
Housing Black thermoplastic, 94V-0 .085 [11.18]
rated [2.16]
Posts Copper alloy, duplex plated
.000030 [0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
matte tin on termination end, with entire
ACTION PIN Headers,

post underplated .000050 [0.00127]


nickel
Shrouded

.100* B
[2.54] .100*
[2.54]
Related Product Data
Mateable Connectors
AMPMODU Board Mount See page 151 for
Receptacles pages 176, 179, 180 hole dimensions
AMPMODU Wire-Applied
Receptacles pages 217-219 Recommended PC Board Hole Layout

5 AMPMODU MT Receptacles
pages 256, 257
ACTION PIN Posts pages 150, 151
Application Tooling page 152
*.003 [0.08] tolerances not to accumulate

No. of
within one connector pattern.

Dimensions Header
Pos. A B C D E Part Nos.
6 .412 [10.46] .332 [8.43] .200 [5.08] .106 [2.69] 5-102699-2
Accessories 8 .512 [13.00] .432 [10.97] .300 [7.62] .106 [2.69] 5-102699-3
10 .612 [15.54] .532 [13.51] .400 [10.16] .206 [5.23] 5-102699-4
Barrier Insert page 204 12 .712 [18.08] .632 [16.05] .500 [12.70] .206 [5.23] 5-102699-5
14 .812 [20.62] .732 [18.59] .600 [15.24] .306 [7.77] 5-102699-6
16 .912 [23.16] .832 [21.13] .700 [17.78] .306 [7.77] 5-102699-7
Technical Documents page 276 18 1.012 [25.70] .932 [23.67] .800 [20.32] .406 [10.31] 5-102699-8
See mating connector for applicable 20 1.112 [28.24] 1.032 [26.21] .900 [22.86] .106 [2.69] .806 [20.47] 5-102699-9
product and application specifications 26 1.412 [35.86] 1.332 [33.83] 1.200 [30.48] .106 [2.69] 1.106 [28.09] 6-102699-2
30 1.612 [40.94] 1.532 [38.91] 1.400 [35.56] .106 [2.69] 1.306 [33.17] 6-102699-4
34 1.812 [46.02] 1.732 [43.99] 1.600 [40.64] .106 [2.69] 1.506 [38.25] 6-102699-6
40 2.112 [53.64] 2.032 [51.61] 1.900 [48.26] .106 [2.69] 1.806 [45.87] 6-102699-9
50 2.612 [66.34] 2.532 [64.31] 2.400 [60.96] .106 [2.69] 2.306 [58.57] 7-102699-3
60 3.112 [79.04] 3.032 [77.01] 2.900 [73.66] .106 [2.69] 2.806 [71.27] 7-102699-8

Note: All part numbers are RoHS compliant.


148
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

ACTION PIN HeadersShrouded with .150 [3.81] End Dimension,


Double-Row, .100 x .100 [2.54 x 2.54] Centerline
.025 [0.64] Square .150
[3.81]
Straight Post (with Detent (2 Plc.) .040
.250
B [1.02] .320
Windows, for .093-.125 C (3 Plc.) .100 .200 [8.13] [6.35]
Ref.
[.236-3.18] Thick PC Board) .100
[2.54]
Typ. [2.54] [5.08]
(Contact Area)

.400
[10.16]

.090 .090
[2.29] [2.29]
A (2 Plc.)

E
.240
D [6.10]
(2 Plc.)

.440
Material and Finish [11.18]
.085
Housing Black thermoplastic, 94V-0 [2.16]
rated
Posts Copper alloy, duplex plated
.000030 [0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
matte tin on termination end, with entire .100* B

ACTION PIN Headers,


post underplated .000050 [0.00127] [2.54] .100*
nickel [2.54]

Shrouded
Related Product Data
See page 151 for
Mateable Connectors hole dimensions

AMPMODU MTE Receptacles Recommended PC Board Hole Layout


pages 232, 233 *.003 [0.08] tolerances not to accumulate
ACTION PIN Posts pages 150, 151 within one connector pattern.
Application Tooling page 152

Accessories
Barrier Insert page 204
No. of
Pos.
6
8
A
.580 [14.73]
.680 [17.27]
B
.500 [8.43]
.600 [10.97]
Dimensions
C
.200 [5.08]
.300 [7.62]
D
.190 [4.83]
.190 [4.83]


E
Header
Part Nos.
6-102557-0
6-102557-1
5
10 .780 [19.81] .700 [17.78] .400 [10.16] .290 [7.37] 5-102557-9
12 .880 [22.35] .800 [20.32] .500 [12.70] .290 [7.37] 6-102557-2
Technical Documents page 276 14 .980 [24.89] .900 [22.86] .600 [15.24] .390 [9.91] 6-102557-3
16 1.080 [27.43] 1.000 [25.40] .700 [17.78] .390 [9.91] 6-102557-4
See mating connector for applicable 18 1.180 [29.97] 1.100 [27.94] .800 [20.32] .490 [10.31] 6-102557-5
product and application specifications 20 1.280 [32.51] 1.200 [30.48] .900 [22.86] .190 [4.83] .890 [22.61] 5-102557-2
24 1.480 [37.59] 1.400 [35.56] 1.100 [27.94] .190 [4.83] 1.090 [27.69] 6-102557-7
26 1.580 [40.13] 1.500 [38.10] 1.200 [30.48] .190 [4.83] 1.190 [30.23] 5-102557-3
30 1.780 [45.21] 1.700 [43.18] 1.400 [35.56] .190 [4.83] 1.390 [35.31] 5-102557-4
34 1.980 [50.29] 1.900 [48.26] 1.600 [40.64] .190 [4.83] 1.590 [40.39] 5-102557-5
40 2.280 [57.91] 2.200 [55.88] 1.900 [48.26] .190 [4.83] 1.890 [48.01] 5-102557-1
50 2.780 [70.61] 2.700 [68.58] 2.400 [60.96] .190 [4.83] 2.390 [60.71] 5-102557-6
60 3.280 [83.31] 3.200 [81.28] 2.900 [73.66] .190 [4.83] 2.890 [73.41] 5-102557-7

Note: All part numbers are RoHS compliant.


149
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

ACTION PIN Press-Fit Posts


The Reliable Plated-Through Hole Interconnect
Solderless interconnections have been popular in electrical
and electronic applications with world-wide success for
decades. They provide reliable electrical and mechanical
stability and offer applied-cost savings across the board.
For PC board applications, compliant ACTION PIN posts
provide these features:
Large gas-tight contact zone

High reliability due to stored energy


More resistant to damage to plated-through holes during
installation
Especially suited for multilayer PC boards
Less costly board manufacturing due to larger hole
tolerances compared to use of solid pins
Application can be made by end-user
Repairabilitycontact can be replaced in the same pin
location (two repairs) Principle of the Compliant ACTION PIN Post
Installation with no heat cycling of board When a compliant ACTION PIN post is inserted into a
Permits mass insertion by minimizing forces needed to plated-through hole, two spring members are compressed,
insert pins as compared to solid pin press-fit application exerting force against the hole for a gas-tight connection.
The diameter of the hole is smaller than the diagonal size of
Significant applied-cost savings in many applications the pin (see cross-section illustration below).
Since compliant ACTION PIN posts do not have to be
Press-Fit Posts

The beam characteristics of the pin are designed so that a


ACTION PIN

soldered, problems associated with solder are eliminated, plastic, as well as an elastic, deformation takes place during
such as: insertion. The two spring members compress to different
Faulty solder joints degrees to accommodate hole tolerances. The compliant
pin also reduces strain on the board. With a rigid pin, the
Solder fumes; contaminants are deposited on the
elastic strain energy is stored entirely in the board, leading
contacts
to damage of the plated-through holes. With the compliant
Solder spots; short circuits between printed circuits ACTION PIN post, the residual force of the elastic
Flux residuals deformation maintains stored energy to produce a tight

5

contact zone between the pin and the plated-through hole.
Thermal strain on printed circuit boards and This maintains long-term electrical and mechanical
components reliability of the interconnection.
Degassing of plated-through holes
Solderless press-fit interconnections using compliant pins
are primarily integrated in, but not limited to, backplanes.
Solderless press-fit interconnections are used in racks,
especially where connectors must be fixed on the solder
side of the PC board and/or component side. In these
applications, the holes for ACTION PIN post connectors are
covered during the soldering process and press-fitting is
performed after soldering.
Other applications for ACTION PIN post interconnections
include PC boards that incorporate components using
surface mount technology (SMT). Here, too, press-fit
interconnections can be applied after soldering, thus Minimum Maximum
eliminating complications associated with connectors Hole Dia. Hole Dia.
suitable for surface mounting. .037 [0.94] .043 [1.09]

Cross-Section Area of ACTION PIN Press-Fit Post in Printed Circuit


Board Holes

150
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

ACTION PIN Press-Fit Posts (Continued)

ACTION PIN posts provide a more reliable press-fit


connection. Localized pressure in the interface area provides
oxide break-through and prevents corrosion better in many
of the harshest environments to help provide a reliable
connection. Also, radial and axial distortion are controlled to
meet todays standards for multilayer board applications.

Press-Fit Posts
ACTION PIN

PC Board Thickness
ACTION PIN posts are
designed for use in a variety Annular Ring (See Note)
of PC board thicknesses. Drilled Hole
However, certain ACTION Copper Thickness
PIN posts are to be used in
specific ranges of board
thicknesses. To promote
Tin-lead Thickness
Plated-Through Hole 5
optimum
performance, the
recommended board
thicknesses provided with
the connector being used
must be followed.

ACTION PIN Post/PC Board Applications


ACTION PIN Contact Drilled Hole Plating Thicknesses Plated-Through Distortion Specification*
Material Thickness Diameter Copper* Tin-lead Hole Diameter Average Maximum
.025 [0.64] .0453.001 [1.1510.03] .001-.003 [0.03-0.08] .0003 [0.008]Min. .037-.043 [0.94-1.09] .0015 [0.038] .002 [0.05]
*Maximum hardness of copper layer is 150 Knoop.
**Radial hole distortion.
Note: Recommended annular ring diameter is hole diameter plus .020 [0.51].

151
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Application Tooling for AMPMODU Headers with ACTION PIN Posts

ACTION PIN Post Single-Row Connector Double-Row Connector Triple-Row Connector


Seating Tools Seating Tools
Replacement Tooling Seating Tools
Header Size Tool Header Size Tool
Tooling Assembly No. 91171-1 (No. of Pos.) Assembly No. (No. of Pos.) Assembly No.
is used to install single-row 4 91170-1 96 91169-8
AMPMODU headers with 6 91170-1 105 91169-6
ACTION PIN posts into 8 91170-2 120 91169-7
PC boards. 12 91170-5 150 91169-3
14 91170-6 195 91169-2
Pin headers with 16 91170-7 204 91169-1
ACTION PIN posts allow 20 91170-9 210 91169-5
high speed, solderless
24 1-91170-1 300 91169-9
Rear Insertion/Extraction Tool back-plane construction
No. 265871-7 (Ref. 408-2636) 30 1-91170-4
through press-fit applica-
Includes: 36 1-91170-7
Impact Tool No. 380392-8
tion. Press fitting connectors
40 1-91170-9
Removal Tool No. 265964-1 to printed circuit boards
Replacement Tip No. 308554-1 requires special seating 50 2-91170-4
tools which transfer applica- 60 2-91170-9
tion force directly to the 80 3-91170-2
contacts. 96 3-91170-5
100 3-91170-6
Force applied to the tool
120 3-91170-8
to seat the connectors
140 4-91170-0
can be provided by the TE
200 4-91170-2
seating machines shown on
this page.
Application Tooling for

For tooling information,


ACTION PIN Posts

call the TE Automation


Group 1-800-722-1111.

ASG Servo Electric Presses

5 TE offers a wide range of


servo-electric presses for
the application of press-fit
connectors. Systems are
pressed is monitored to con-
firm that maximum force is
not exceeded and minimum
force is met. Each system
Please see the matrix
below and contact TE
Automation Group at 1-800-
722-1111 for assistance in
available with varying force controls force, height and understanding which system
capacity, board size capac- speed to allow termination will best meet your needs.
ity and process capability. of the pressing cycle by
Each system features real- force or height parameters.
time force feedback and PC Complete SPC data is avail-
control to allow the highest able as each connector
BMEP 5T level of control and trace- press cycle is monitored
ability. Every connector and stored.

Max Pressing Force Max Board Size (L x W)


Press Model Description
tons [kN] in [mm]
Semi-automatic, benchtop
BMEP 3T servo-electric press 3 [26.7] 18 x 24 [460 x 610]
Semi-automatic, benchtop
BMEP 5T servo-electric press 5 [44.5] 18 x 24 [460 x 610]
Semi-automatic, stand-alone
MEP 6T servo-electric press 6 [53.4] 24 x 36 [610 x 914]
Semi-automatic, stand-alone
AEP 6T MEP 12T servo-electric press 12 [106.8] 30 x 36 [ 762 x 914]
Automatic, inline
AEP 12T servo-electric press 12 [106.8] 36 x 48 [914 x 1219]
Automatic, stand alone
AEP 6T servo-electric press 6 [53.4] 30 x 36 [762 x 914]

Note: All part numbers are RoHS compliant.


152
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Application Tooling for Post Insertion


TE offers a wide range of Modular Insertion System Bench
application tooling solutions Machine No. 217600-1
ranging from stand alone
manual insertion systems This machine uses TE insertion heads to install a variety of
through fully automatic printed circuit board products at rates of 2,000 per hour.
inline systems. Please The printed circuit board is placed in a Board Holding
contact your local TE repre- Fixture which is attached to a two-hand controlled mecha-
sentative or the TE Tooling nism. The operator moves the board over the machine
Assistance Center at anvil; a switch in the anvil actuates the machine when the
1-800-722-1111 for help in printed circuit board is placed on the anvil. A spotlight
finding the right solution to illuminates the insertion area.
meet your particular Consult TE for further information on this machine and the
requirements. insertion heads.

Application Tooling for


ACTION PIN Posts
5
P300 and P350 Automatic Insertion Machines
The P300 and P350 are automatic insertion machines
for the application of reeled compliant pin and thru-hole
products. Systems are available as stand alone or fully
inline with SMEMA compatible conveyor system. Up to
3 different insertion heads can be mounted on a system
allowing one machine to apply up to 3 different products.
Insertion rates of up to 3 insertions per second on the P300
and up to 5 insertions per second on a P350 are possible
(application dependent). PCBs up to 15.5" x 23.5"
[400x600mm] on the P300 and up to 17.5" x 17.5"
[450x450mm] on the P350 can be processed by high
speed XY positioning tables. A wide range of options,
including force monitoring, PCB vision correct, and
PCB thickness measurement are available to meet your
performance and production flexibility requirements.

Note: All part numbers are RoHS compliant.


153
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System

ACTION PIN Stacking Connector System


(Non-Intermateable with AMPMODU Connectors)
Product Facts
Can stack multiple printed
circuit boards without the
need of a mother board
Connect bus lines in the
shortest possible distance
Receptacle assembly has
ACTION PIN posts for sol-
derless board mounting
Can be mounted onto the
board simply by press
fitting with Mini-Press
Receptacle assembly is
easy to service and replace
(up to 2 times)
Receptacle contacts are
of fork design to mate with
posts at two points.
Virtually eliminates danger
of scooping at mating/
unmating
ACTION PIN Stacking

Stacking dimensions are


Connector System

13.4 [.528] or 19.0 [.748]


when using receptacle ACTION PIN Stacking bus lines in the shortest sizes of 26, 30, 34, 40,
assemblies together, and Connectors are a family of possible distance without 50 and 60 positions.
13.9 [.547] or 19.5 [.768] two-piece connectors used to the need of a mother board, ACTION PIN Stacking
when using a combination stack multiple printed circuit thus permitting effective Connectors consist of a
of receptacle and post boards in parallel. They have utilization of space above receptacle assembly, a
header assemblies been developed to provide the board; compared with mating post header and
Accepts 1.6 [.062] thick a more reliable and other methods of jumper a post hood to protect
economical means of connection using cable the post portion of the

5
boards
compact wiring and high- connectors, they make the receptacle assembly.
Housing provided with density packaging inside a overall board layout more
polarization to help prevent A complete description
variety of electronic clean and straight for of the ACTION PIN
mismating equipment. compact packaging. Stacking Connectors is
Housing made of chemical- The connectors have many Contacts are on 2.54 x 2.54 presented on the following
resistant glass-filled PBT, advanced features: they [.100 x .100] grid. The page (155).
black in color can be used to connect connectors are available in
Contacts are of copper alloy
material with high spring
characteristics, gold-over-
nickel plated
Post hood available to
protect the post portion of
receptacle contacts. Can be
selected depending on
stacking dimensions
Connectors available in
sizes of 26, 30, 34, 40, 50
and 60 positions
Product specification:
108-5197

154
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System

ACTION PIN Stacking Connector System


(Non-Intermateable with AMPMODU Connectors) (Continued)
Receptacle Assembly one is used with an outer- which an outer board mount
The receptacle assembly most board and the other receptacle assembly is
features reliability and with intermediary boards. A applied. The post header is
economy characteristic of solder version is also avail- preloaded with 0.50 [.022]
this product line. able for the outer board square soldering posts.
mount assembly. These posts are protected by
The mating portion of its the side walls of the housing.
built-in receptacle contacts Post Hood
is a fork design, highly When using the intermediary Stacking dimensions
resilient and helps prevent board mount receptacle provided by this connector
damage to contacts by assembly, this post hood is line are as follows:
scooping at mating/ used to protect the post When the outer board
unmating. portion of the assembly. The receptacle and intermediary
On the board mount side of post hood is available in two board receptacle
the assembly are 0.55 [.022] types: one with the housing assemblies are used
square ACTION PIN posts. height of 10.0 [.394] and the 13.4 [.528] or 19.0 [.748].
other with the housing height When the intermediary
No soldering is required to of 15.7 [.618]. They can be
mount the assembly on the board receptacle assembly
selected, depending on and the post header
board, the posts being simply, stacking dimensions.
press fit into the boards assembly are used
0.825 [.032] diameter holes. Post Header 13.9 [.547] or 19.5 [.768].

Two types of receptacle The post header is mounted


assemblies are available; onto the outer board on the

ACTION PIN Stacking


other side of the board to

Connector System
Typical Application
PC Board
1.6
[.062]

5
Receptacle Assembly thickness
(For outer board)
(ACTION PIN Type)
Part No.: 173145

Post Hood Stacking Dim.


Part No.: 173144 13.4 [.528], 19.0 [.748]
Receptacle + Receptacle
PC Board
1.6
Receptacle Assembly [.062]
(For inner board) thickness
(ACTION PIN Type)
Part No.: 173145

Post Header Stacking Dim.


(Solder Type) 13.9 [.547], 19.5 [.768]
Part No.: 173146 Receptacle + Post

PC Board
1.6
[.062]
thickness

Note: All part numbers are RoHS compliant.


155
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System

Post Hood (Non-Intermateable with AMPMODU Connectors)

A
B 0.75
2.54 [.030]
[.100] Hole Dia.
Pitch X Y Y

The post hood, mounted 8.9


[.350]
onto the post of the
intermediary receptacle 0.6*
X
assembly, protects the post [.024]
and serves as a header 2.54 Section X-X Hole Dia.
[.100] *
assembly when stacking
several boards.
10.0
[.394] C
Material
Black glass-filled PBT, 94V-0 rated

Section Y-Y
Stacking Connectors,
Post Hood

5 Acceptable
Post Length
For
No. of
Pos.
26
A
38.1 [1.500]
Dimensions (See Note.)
B
30.48 [1.200]
C
10.0 [.394]
Post Hood
Part Nos.
1-173144-1
8.9 [.350] 30 43.2 [1.700] 33.56 [1.321] 10.0 [.394] 173144-2
or 34 48.3 [1.900] 40.64 [1.600] 10.0 [.394] 1-173144-2
10.9 [.429] 40 55.9 [2.200] 48.26 [1.900] 10.0 [.394] 173144-3
(For Stacking Dimension) 50 68.6 [2.700] 65.96 [2.597] 10.0 [.394] 173144-4
13.4 [.528]
60 81.3 [3.200] 73.66 [2.900] 10.0 [.394] 173144-5
26 38.1 [1.500] 30.48 [1.200] 15.6 [.614] 1-173144-3
For
14.5 [.571] 30 43.2 [1.700] 33.56 [1.321] 15.6 [.614] 173144-7
or 34 48.3 [1.900] 40.64 [1.600] 15.6 [.614] 1-173144-4
16.5 [.650] 173144-8
40 55.9 [2.200] 48.26 [1.900] 15.6 [.614]
(For Stacking Dimension) 3-173144-8*
19.0 [.748] 50 68.6 [2.700] 65.96 [2.597] 15.6 [.614] 173144-9
60 81.3 [3.200] 73.66 [2.900] 15.6 [.614] 1-173144-0
*0.60 [.024] dia. applies to 16 holes on both sides, except Part No. 3-173144-8.

Note: All part numbers are RoHS compliant.


156
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System

Receptacle Assemblies with ACTION PIN Posts and Solder Posts


(Non-Intermateable with AMPMODU Connectors)
Receptacle Assembly for 2.54
[.100]
A
0.5
Outer Board (With 0.55 Y Y [.020]
[.022] Square Post)
7.6 Blank
[.300] width
16.5 0.69**
[.650] [.027]

2.54 B Contact 2.54


[.100] Area [.100]
Pitch 3.7 6.4 3.7 6.4
[.146] [.252] [.146] [.252]
X
Contact
Area

11.9
[.469] 0.5
0.5
[.020]
[.020]

ACTION
X L
PIN
Material and Finish Area
Mating L 2.54
Housing Black glass-filled PBT, Area [.100]
94V-0 rated
Contacts Copper alloy, plated
0.00020 [.000008] gold on contact area 2.54 Pitch 2.54
and post mating area, gold flash on [.100] [.100]

Stacking Connectors,
ACTION PIN tail or 0.000070 [.0000027] B Section X-X Section X-X
tin on solder tail, with entire contact Section Y-Y ACTION PIN Solder Type

Receptacles
underplated 0.00130 [.000050] nickel Type

Application Tooling shown on


page 162.
2.540.1 2.540.1
[.100.004] [.100.004]
0.1
B [.004]
Recommended PC Board Hole Layout
PC Board Mounting
Dimensions
Thru hole
plating Copper
0.02500-0.05000
Land dia.
1.4 Min.
[.055]
For Outer Board
Post
No. of Dimensions (See Note.) Receptacle
5
[.000984-.001968] Board Type Length Assembly
Thick L Pos. A B Part Nos.
1.6
26 35.6 [1.402] 30.48 [1.200] 1-173145-7
[.062]
30 40.6 [1.598] 35.56 [1.400] 173145-2
ACTION PIN 34 45.7 [1.799] 40.64 [1.600] 1-173145-8
4.2*
Post 40 53.3 [2.098] 48.26 [1.900] 173145-3
50 66.0 [2.598] 60.96 [2.400] 173145-4
Finished 60 78.7 [3.098] 73.66 [2.900] 173145-5
hole dia. 26 35.6 [1.402] 30.48 [1.200] 2-173145-8
0.8250.05 PCB drill hole 30 40.6 [1.598] 35.56 [1.400] 2-173145-4
[.032.002] 0.90.025 34 45.7 [1.799] 40.64 [1.600] 2-173145-9
[.035.0001] Solder Post 4.2* 40 53.3 [2.098] 48.26 [1.900] 2-173145-5
ACTION PIN Post 50 66.0 [2.598] 60.96 [2.400] 2-173145-6
2-173145-7
60 78.7 [3.098] 73.66 [2.900]
Board 3-173145-0**
Finished Thick
1.6
**After mounted receptacle assembly is on board, dimension of extrude length from board is 2.6 [.102].
hole dia.
[.062] **Post Length = 17.0 [.669] , Blank Width = 0.69 [.027] (see above figure) (finished hole dia. = 1.0 [.039]).
0.80.05
[.031.002]

Solder Post

Note: All part numbers are RoHS compliant.


157
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System

Receptacle Assemblies with ACTION PIN Posts


(Non-Intermateable with AMPMODU Connectors)
Receptacle Assembly for
2.54
Inner Board (With 0.55 [.100] A
[.022] Square Post) Y Y

7.6
[.300]

2.54 B
[.100] 3.7
[.146] 6.4
Pitch
X [.252]
Contact
Area

Material and Finish


11.9
0.5
Housing Black glass-filled PBT, [.469]
[.020]
94V-0 rated
Contacts Copper alloy, plated
0.00020 [.000008] gold on contact area ACTION
X
and post mating area, gold flash on PIN
ACTION PIN tail or 0.000070 [.0000027] Area
L
Mating
tin on solder tail, with entire contact Area
underplated 0.00130 [.000050] nickel

2.54 Pitch 2.54


Stacking Connectors,

Application Tooling shown on [.100] [.100]


page 162. B Section X-X
Receptacles

Section Y-Y

PC Board Mounting
Dimensions

Thru hole Land dia. 2.540.1 2.540.1


plating Copper 1.4 Min.

5
[.100.004] [.100.004]
0.02500-0.05000 [.055]
[.000984-.001968] Board 0.1
B [.004]
Thick
1.6 Recommended PC Board Hole Layout
[.062]

For Inner Board


Finished
Post Dimensions (See Note.) Receptacle
hole dia. Stacking No. of
Length Assembly
0.8250.05 PCB drill hole Dimensions Pos. A B
[.032.002]
L Part Nos.
0.90.025
[.035.0001] 30 40.6 [1.598] 35.56 [1.400] 3-173145-2
34 45.7 [1.799] 40.64 [1.600] 3-173145-7
8.9 3-173145-3
40 53.3 [2.098] 48.26 [1.900]
.350 3-173145-1*
50 66.0 [2.598] 60.96 [2.400] 3-173145-4
60 78.7 [3.098] 73.66 [2.900] 3-173145-5
13.4 [.528]
26 35.6 [1.402] 30.48 [1.200] 1-173145-9
30 40.6 [1.598] 35.56 [1.400] 173145-7
10.9 34 45.7 [1.799] 40.64 [1.600] 2-173145-0
.429 40 53.3 [2.098] 48.26 [1.900] 173145-8
50 66.0 [2.598] 60.96 [2.400] 173145-9
60 78.7 [3.098] 73.66 [2.900] 1-173145-0
*Contact area and post mating area: 0.00050 [.000020] min. gold over 0.00130 [.000050] min. nickel plated.

Note: All part numbers are RoHS compliant.


158
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System

Receptacle Assemblies with ACTION PIN Posts


(Non-Intermateable with AMPMODU Connectors) (Continued)

For Inner Board (Continued)


Post Dimensions (See Note.) Receptacle
Stacking No. of
Dimensions Length Pos. Assembly
L A B Part Nos.
26 35.6 [1.402] 30.48 [1.200] 4-173145-2
30 40.6 [1.598] 35.56 [1.400] 3-173145-8
34 45.7 [1.799] 40.64 [1.600] 4-173145-3
14.5 [.571]
40 53.3 [2.098] 48.26 [1.900] 3-173145-9
50 66.0 [2.598] 60.96 [2.400] 4-173145-0
60 78.7 [3.098] 73.66 [2.900] 4-173145-1
19.0 [.748]
26 35.6 [1.402] 30.48 [1.200] 2-173145-1
30 40.6 [1.598] 35.56 [1.400] 1-173145-2
34 45.7 [1.799] 40.64 [1.600] 2-173145-2
16.5 [.650]
40 53.3 [2.098] 48.26 [1.900] 1-173145-3
50 66.0 [2.598] 60.96 [2.400] 1-173145-4
60 78.7 [3.098] 73.66 [2.900] 1-173145-5
*Contact area and post mating area: 0.00050 [.000020] min. gold over 0.00130 [.000050] min. nickel plated.

Stacking Connectors,
Receptacles
5

Note: All part numbers are RoHS compliant.


159
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System

Post Headers with Solder Posts


(Non-Intermateable with AMPMODU Connectors)
Post Header
(With 0.55 [.022] Square
Post) A

B
2.54
2.54 [.100]
[.100] Pitch Y Y

8.9
[.350]

X
Material and Finish 8.5
Housing Black glass-filled PBT, [.335]
C L
94V-0 rated
Posts Copper alloy, plated 0.00020
[.000008] gold on contact area, X
0.000070 [.0000027] min. tin on solder
0.5
tail, with entire post underplated 3.7
2.54
[.020]
0.00130 [.000050] nickel [.146] [.100]
Pitch
B

PC Board Mounting Section Y-Y Section X-X


Stacking Connector

Dimensions
Post Headers

Board
Finished Thick
hole dia. 1.6
0.80.06 [.062]
[.031.002]

2.540.1 2.540.1
[.100.004] [.100.004]
0.1
B [.004]

5 Recommended PC Board Hole Layout

Stacking Post Dimensions (See Note.) Part Nos. of


No. of
Length Post Header
Dimensions L Pos. A B C Assembly
26 38.1 [1.500] 30.48 [1.200] 10.5 [.413] 3-173146-5
30 43.2 [1.700] 35.56 [1.400] 10.5 [.413] 3-173146-1
34 48.3 [1.900] 40.64 [1.600] 10.5 [.413] 3-173146-6
5.8 [.228] 3-173146-2
40 55.9 [2.200] 48.26 [1.900] 10.5 [.413]
3-173146-0*
50 68.6 [2.700] 60.96 [2.400] 10.5 [.413] 3-173146-3
60 81.3 [3.200] 73.66 [2.900] 10.5 [.413] 3-173146-4
13.9 [.547]
26 38.1 [1.500] 30.48 [1.200] 10.5 [.413] 2-173146-1
30 43.2 [1.700] 35.56 [1.400] 10.5 [.413] 1-173146-7
34 48.3 [1.900] 40.64 [1.600] 10.5 [.413] 2-173146-2
7.8 [.307] 1-173146-8
40 55.9 [2.200] 48.26 [1.900] 10.5 [.413]
4-173146-3*
50 68.6 [2.700] 60.96 [2.400] 10.5 [.413] 1-173146-9
60 81.3 [3.200] 73.66 [2.900] 10.5 [.413] 2-173146-0
*Contact mating area: 0.00050 [.000020] min. gold over 0.00130 [.000050] min. nickel plated.

Note: All part numbers are RoHS compliant.


160
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System

Post Headers with Solder Posts


(Non-Intermateable with AMPMODU Connectors) (Continued)

Stacking Post Dimensions (See Note.) Part Nos. of


No. of
Length Post Header
Dimensions L Pos. A B C Assembly
26 38.1 [1.500] 30.48 [1.200] 16.1 [.634] 4-173146-1
30 43.2 [1.700] 35.56 [1.400] 16.1 [.634] 3-173146-7
34 48.3 [1.900] 40.64 [1.600] 16.1 [.634] 4-173146-2
11.4 [.449]
40 55.9 [2.200] 48.26 [1.900] 16.1 [.634] 3-173146-8
50 68.6 [2.700] 60.96 [2.400] 16.1 [.634] 3-173146-9
60 81.3 [3.200] 73.66 [2.900] 16.1 [.634] 4-173146-0
19.5 [.768]
26 38.1 [1.500] 30.48 [1.200] 16.1 [.634] 2-173146-8
30 43.2 [1.700] 35.56 [1.400] 16.1 [.634] 2-173146-4
13.4 [.528] 34 48.3 [1.900] 40.64 [1.600] 16.1 [.634] 2-173146-9
40 55.9 [2.200] 48.26 [1.900] 16.1 [.634] 2-173146-5
50 68.6 [2.700] 60.96 [2.400] 16.1 [.634] 2-173146-6
60 81.3 [3.200] 73.66 [2.900] 16.1 [.634] 2-173146-7
*Contact mating area: 0.00050 [.000020] min. gold over 0.00130 [.000050] min. nickel plated.

Stacking Connector
Post Headers
5

Note: All part numbers are RoHS compliant.


161
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Application Tooling for ACTION PIN Stacking Connectors

Mini-Press

1. Insert connector into the board tentatively (Be sure that 2. Attach insertion support plate to the leg portion of con-
connector is in the right direction). nector from below.

No. of
Pos. Part No.
40 1-758030-1
50 1-758030-2
60 1-758030-3
ACTION PIN Stacking Connectors

The part numbers above


include the Mini-Press unit,
Application Tooling for

insertion support plate and


press-fit jig.
Mini-Press Unit
Part No. 1-758030-3
3. Set insertion support plate in place by butting it against 4. By pressing Mini-Press handle down, rest the press-fit
When ordering a press-fit jig Mini-Press platform. jig against connector.
only, consult the table
below.
Press-fit Jig (separate order)

5 No. of
Pos.
26
30
Part No.
907459-1
907459-2
34 907459-3
40 907459-4
50 907459-5
60 907459-6

Also, optional insertion


support plates are
obtainable by separate
order to meet your specific 5. Press handle down gently and insert connector into 6. Now connector has been mounted to the board
requirements for improved the board. securely.
board handling.

Insertion Support Unit


(Option)

Note: All part numbers are RoHS compliant.


162
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

.025 [0.64] Square Posts


Bandolier Posts (Uninsulated) .010
B [0.25]
.100*
Typ. .010 .015
[2.54]
CL [0.25] .070 [0.38]
of Star [1.78]
Bandolier .080
.100 [2.03]
C [2.54] .002
Post D [0.05] Dia.
Recommended
Plated Hole Size
A for Tin Plated
Through Hole
.100
Material and Finish [2.54] PC Pad
Bandolier Brass .020
[0.51]
Posts Phosphor bronze, plated as
Typ. Customer
follows: .048+.006
Plating A Duplex plated .000030 .060 -.003 Board
[1.22+0.15 ]
[0.00076] gold on contact area, .000100- -0.08
.000200 [0.00254-0.00508] tin on solder .097
Max.
area, with entire post underplated .000050 [2.46]
[0.00127] nickel Dimensions Post Plating/Part Nos. Bandolier
Plating B Duplex plated .000015 A B C D Plating A Plating B Plating C Insertion Head
[0.00038] gold on contact area, .000100-
.000200 [0.00254-0.00508] tin on solder .353 [8.97] .071 [1.80] .424 [10.77] .034 [0.86] 5-103577-1 6-103577-3 5-103577-7 904592-1
area, with entire post underplated .000050 .318 [8.08] .071 [1.80] .389 [9.88] .034 [0.86] 5-103577-3 6-103577-5 5-103577-9 904591-1
[0.00127] nickel .034 [0.86] 5-103577-5 6-103577-7 6-103577-1 904590-1
Plating C .000100-.000200 [0.00254- .270 [6.86] .071 [1.80] .341 [8.66]
.031 [0.79] 5-146079-1
0.00508] tin over .000050 [0.00127] nickel
on entire post .183 [4.65] .097 [2.46] .280 [7.11] .031 [0.79] 6-146079-3

Bandolier and Strip Form


Related Product Data Notes: 1. Posts can be applied using Hand Tool 91419-1. *Point of measurement for plating thickness.
2. Approximate posts per reel30,000.
Mateable Connectors 3. The Bandolier Insertion head can be used on the Comp-U-Sertor II machine or the Modular Insertion

Square Posts
Refer to the Mating Post Selection System Bench machine (see page 153).
Guide page 90 4. For PCB finishes other than tin, contact TE.
Accessories
End Shrouds page 203
Application Tooling page 153

Technical Documents page 276


See mating connector for applicable .100*
[2.54] .036.002
product and application specifications.

5
Localized [0.910.05]
Gold Plate Recommended
A Area Plated Hole Size
Strip Form Posts (Uninsulated) for Tin Plated
C .042 Through Hole
[1.07]
PC Pad

Localized Customer
B Tin Plate Board
Area
.050
.020 [1.27] .100
Typ.
[0.51] [2.54]

Dimensions Post Plating/Part Nos. Post/Tab


A B C Plating A Plating B Plating C Plating D Insertion Head
Material and Finish
.210 [5.33] .227 [5.77] .437 [11.10] 1-87878-6 1-87022-4
Posts Phosphor bronze, plated as .278 [7.06] .165 [4.19] .443 [11.25] 5-87623-1 5-87623-4 1-87022-1 1-87022-0 904507-1
follows:
.278 [7.06] .284 [7.21] .562 [14.27] 1-87022-3
Plating A Duplex plated .000030
[0.00076] gold on contact area, .000100- .278 [7.06] .738 [18.75] 1.016 [25.81] 1-87022-2 1-87022-4
.000200 [0.00254-0.00508] tin on solder .318 [8.08] .165 [4.19] .483 [14.27] 4-87022-1 4-87022-3
area, with entire post underplated .000050
[0.00127] nickel Notes: 1. Approximate Posts per reel20,000. *Point of measurement for plating thickness.
Plating B Duplex plated .000015 2. Other post lengths are available, consult TE.
[0.00038] gold on contact area, .000100- 3. The Post/Tab Insertion Head can be used on the Comp-U-Sertor II machine or the Modular Insertion
.000200 [0.00254-0.00508] tin on solder System Bench machine (see page 153).
area, with entire post underplated .000050 4. For PCB finishes other than tin, contact TE.
[0.00127] nickel
Plating C .000030 [0.00076] gold over
.000050 [0.00127] nickel on entire post
Plating D .000100-.000200 [0.00254-
0.00508] tin over .000050 [0.00127] nickel
on entire post Note: All part numbers are RoHS compliant.
163
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

AMPMODU .025 [0.64] Square Continuous Posts

Features of .025 [0.64]


Square Continuous Posts
Brass drawn wire for posts
.400 to 1.000 [10.16 to
25.40] overall pin length
(.010 [0.25] increments)
Plating Options:
Tin
15 in. gold
30 in. gold
Star feature also available

Benefits
Less expensive than
bandolier style posts
Can be placed on printed
circuit boards at any desired
centerline
Less scrap material
(no carrier strip)

Technical Documents page 276


Continuous Posts

Application Specification
.025 Square

114-13011 TE now offers AMPMODU The posts are brass drawn


.025 [0.64] Square wire and are inserted into a
Continuous Posts. These printed circuit board via
posts can be used instead application tooling at any
of the original posts that centerline configuration.
come on a bandolier style They can be used for wire
carrier strip. These posts wrap applications or mated
are on a reel, but the posts to a receptacle.

5 are notched at the desired


length (no carrier strip is
needed). This feature allows
The current rating is 3 amps.
The posts are available
plated with tin, 15 in. gold,
more versatility by providing or 30 in. gold. Other plat-
post lengths from .400 to ings are available upon
1.000 [10.16 to 25.40], request.
available in increments of
.010 [0.25]. TE application tooling is a
modular head (Part Number
904641-1) placed on the
Modular Insertion System
Bench Machine (Part
Number 217600-1.)

Note: All part numbers are RoHS compliant.


164
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

AMPMODU .025 [0.64] Square Continuous Posts (Continued)

Pre-Plated Tin
Part Number Description Part Number Description Part Number Description
Square Square with Star Post Length Square Square with Star Post Length Square Square with Star Post Length
147333-1 147433-1 0.400 [10.16] 2-147333-2 2-147433-2 0.610 [15.49] 4-147333-3 4-147433-3 0.820 [20.83]
147333-2 147433-2 0.410 [10.41] 2-147333-3 2-147433-3 0.620 [15.75] 4-147333-4 4-147433-4 0.830 [21.08]
147333-3 147433-3 0.420 [10.67] 2-147333-4 2-147433-4 0.630 [16.00] 4-147333-5 4-147433-5 0.840 [21.34]
147333-4 147433-4 0.430 [10.92] 2-147333-5 2-147433-5 0.640 [16.26] 4-147333-6 4-147433-6 0.850 [21.59]
147333-5 147433-5 0.440 [11.18] 2-147333-6 2-147433-6 0.650 [16.51] 4-147333-7 4-147433-7 0.860 [21.84]
147333-6 147433-6 0.450 [11.43] 2-147333-7 2-147433-7 0.660 [16.76] 4-147333-8 4-147433-8 0.870 [22.10]
147333-7 147433-7 0.460 [11.68] 2-147333-8 2-147433-8 0.670 [17.02] 4-147333-9 4-147433-9 0.880 [22.35]
147333-8 147433-8 0.470 [11.94] 2-147333-9 2-147433-9 0.680 [17.27] 5-147333-0 5-147433-0 0.890 [22.61]
147333-9 147433-9 0.480 [12.19] 3-147333-0 3-147433-0 0.690 [17.53] 5-147333-1 5-147433-1 0.900 [22.86]
1-147333-0 1-147433-0 0.490 [12.45] 3-147333-1 3-147433-1 0.700 [17.78] 5-147333-2 5-147433-2 0.910 [23.11]
1-147333-1 1-147433-1 0.500 [12.70] 3-147333-2 3-147433-2 0.710 [18.03] 5-147333-3 5-147433-3 0.920 [23.37]
1-147333-2 1-147433-2 0.510 [12.95] 3-147333-3 3-147433-3 0.720 [18.29] 5-147333-4 5-147433-4 0.930 [23.62]
1-147333-3 1-147433-3 0.520 [13.21] 3-147333-4 3-147433-4 0.730 [18.54] 5-147333-5 5-147433-5 0.940 [23.88]
1-147333-4 1-147433-4 0.530 [13.46] 3-147333-5 3-147433-5 0.740 [18.80] 5-147333-6 5-147433-6 0.950 [24.13]
1-147333-5 1-147433-5 0.540 [13.72] 3-147333-6 3-147433-6 0.750 [19.05] 5-147333-7 5-147433-7 0.960 [24.38]
1-147333-6 1-147433-6 0.550 [13.97] 3-147333-7 3-147433-7 0.760 [19.30] 5-147333-8 5-147433-8 0.970 [24.64]
1-147333-7 1-147433-7 0.560 [14.22] 3-147333-8 3-147433-8 0.770 [19.56] 5-147333-9 5-147433-9 0.980 [24.89]
1-147333-8 1-147433-8 0.570 [14.48] 3-147333-9 3-147433-9 0.780 [19.81] 6-147333-0 6-147433-0 0.990 [25.15]
1-147333-9 1-147433-9 0.580 [14.73] 4-147333-0 4-147433-0 0.790 [20.07] 6-147333-1 6-147433-1 1.000 [25.40]
2-147333-0 2-147433-0 0.590 [14.99] 4-147333-1 4-147433-1 0.800 [20.32]
2-147333-1 2-147433-1 0.600 [15.24] 4-147333-2 4-147433-2 0.810 [20.57]

Pre-Plated 15 in. Gold


Part Number Description Part Number Description Part Number Description
Square Square with Star Post Length Square Square with Star Post Length Square Square with Star Post Length
147334-1 147434-1 0.400 [10.16] 2-147334-2 2-147434-2 0.610 [15.49] 4-147334-3 4-147434-3 0.820 [20.83]
147334-2 147434-2 0.410 [10.41] 2-147334-3 2-147434-3 0.620 [15.75] 4-147334-4 4-147434-4 0.830 [21.08]

Continuous Posts
147334-3 147434-3 0.420 [10.67] 2-147334-4 2-147434-4 0.630 [16.00] 4-147334-5 4-147434-5 0.840 [21.34]

.025 Square
147334-4 147434-4 0.430 [10.92] 2-147334-5 2-147434-5 0.640 [16.26] 4-147334-6 4-147434-6 0.850 [21.59]
147334-5 147434-5 0.440 [11.18] 2-147334-6 2-147434-6 0.650 [16.51] 4-147334-7 4-147434-7 0.860 [21.84]
147334-6 147434-6 0.450 [11.43] 2-147334-7 2-147434-7 0.660 [16.76] 4-147334-8 4-147434-8 0.870 [22.10]
147334-7 147434-7 0.460 [11.68] 2-147334-8 2-147434-8 0.670 [17.02] 4-147334-9 4-147434-9 0.880 [22.35]
147334-8 147434-8 0.470 [11.94] 2-147334-9 2-147434-9 0.680 [17.27] 5-147334-0 5-147434-0 0.890 [22.61]
147334-9 147434-9 0.480 [12.19] 3-147334-0 3-147434-0 0.690 [17.53] 5-147334-1 5-147434-1 0.900 [22.86]
1-147334-0 1-147434-0 0.490 [12.45] 3-147334-1 3-147434-1 0.700 [17.78] 5-147334-2 5-147434-2 0.910 [23.11]
1-147334-1 1-147434-1 0.500 [12.70] 3-147334-2 3-147434-2 0.710 [18.03] 5-147334-3 5-147434-3 0.920 [23.37]
1-147334-2 1-147434-2 0.510 [12.95] 3-147334-3 3-147434-3 0.720 [18.29] 5-147334-4 5-147434-4 0.930 [23.62]
1-147334-3 1-147434-3 0.520 [13.21] 3-147334-4 3-147434-4 0.730 [18.54] 5-147334-5 5-147434-5 0.940 [23.88]

5
1-147334-4 1-147434-4 0.530 [13.46] 3-147334-5 3-147434-5 0.740 [18.80] 5-147334-6 5-147434-6 0.950 [24.13]
1-147334-5 1-147434-5 0.540 [13.72] 3-147334-6 3-147434-6 0.750 [19.05] 5-147334-7 5-147434-7 0.960 [24.38]
1-147334-6 1-147434-6 0.550 [13.97] 3-147334-7 3-147434-7 0.760 [19.30] 5-147334-8 5-147434-8 0.970 [24.64]
1-147334-7 1-147434-7 0.560 [14.22] 3-147334-8 3-147434-8 0.770 [19.56] 5-147334-9 5-147434-9 0.980 [24.89]
1-147334-8 1-147434-8 0.570 [14.48] 3-147334-9 3-147434-9 0.780 [19.81] 6-147334-0 6-147434-0 0.990 [25.15]
1-147334-9 1-147434-9 0.580 [14.73] 4-147334-0 4-147434-0 0.790 [20.07] 6-147334-1 6-147434-1 1.000 [25.40]
2-147334-0 2-147434-0 0.590 [14.99] 4-147334-1 4-147434-1 0.800 [20.32]
2-147334-1 2-147434-1 0.600 [15.24] 4-147334-2 4-147434-2 0.810 [20.57]

Pre-Plated 30 in. Gold


Part Number Description Part Number Description Part Number Description
Square Square with Star Post Length Square Square with Star Post Length Square Square with Star Post Length
147335-1 147435-1 0.400 [10.16] 2-147335-2 2-147435-2 0.610 [15.49] 4-147335-3 4-147435-3 0.820 [20.83]
147335-2 147435-2 0.410 [10.41] 2-147335-3 2-147435-3 0.620 [15.75] 4-147335-4 4-147435-4 0.830 [21.08]
147335-3 147435-3 0.420 [10.67] 2-147335-4 2-147435-4 0.630 [16.00] 4-147335-5 4-147435-5 0.840 [21.34]
147335-4 147435-4 0.430 [10.92] 2-147335-5 2-147435-5 0.640 [16.26] 4-147335-6 4-147435-6 0.850 [21.59]
147335-5 147435-5 0.440 [11.18] 2-147335-6 2-147435-6 0.650 [16.51] 4-147335-7 4-147435-7 0.860 [21.84]
147335-6 147435-6 0.450 [11.43] 2-147335-7 2-147435-7 0.660 [16.76] 4-147335-8 4-147435-8 0.870 [22.10]
147335-7 147435-7 0.460 [11.68] 2-147335-8 2-147435-8 0.670 [17.02] 4-147335-9 4-147435-9 0.880 [22.35]
147335-8 147435-8 0.470 [11.94] 2-147335-9 2-147435-9 0.680 [17.27] 5-147335-0 5-147435-0 0.890 [22.61]
147335-9 147435-9 0.480 [12.19] 3-147335-0 3-147435-0 0.690 [17.53] 5-147335-1 5-147435-1 0.900 [22.86]
1-147335-0 1-147435-0 0.490 [12.45] 3-147335-1 3-147435-1 0.700 [17.78] 5-147335-2 5-147435-2 0.910 [23.11]
1-147335-1 1-147435-1 0.500 [12.70] 3-147335-2 3-147435-2 0.710 [18.03] 5-147335-3 5-147435-3 0.920 [23.37]
1-147335-2 1-147435-2 0.510 [12.95] 3-147335-3 3-147435-3 0.720 [18.29] 5-147335-4 5-147435-4 0.930 [23.62]
1-147335-3 1-147435-3 0.520 [13.21] 3-147335-4 3-147435-4 0.730 [18.54] 5-147335-5 5-147435-5 0.940 [23.88]
1-147335-4 1-147435-4 0.530 [13.46] 3-147335-5 3-147435-5 0.740 [18.80] 5-147335-6 5-147435-6 0.950 [24.13]
1-147335-5 1-147435-5 0.540 [13.72] 3-147335-6 3-147435-6 0.750 [19.05] 5-147335-7 5-147435-7 0.960 [24.38]
1-147335-6 1-147435-6 0.550 [13.97] 3-147335-7 3-147435-7 0.760 [19.30] 5-147335-8 5-147435-8 0.970 [24.64]
1-147335-7 1-147435-7 0.560 [14.22] 3-147335-8 3-147435-8 0.770 [19.56] 5-147335-9 5-147435-9 0.980 [24.89]
1-147335-8 1-147435-8 0.570 [14.48] 3-147335-9 3-147435-9 0.780 [19.81] 6-147335-0 6-147435-0 0.990 [25.15]
1-147335-9 1-147435-9 0.580 [14.73] 4-147335-0 4-147435-0 0.790 [20.07] 6-147335-1 6-147435-1 1.000 [25.40]
2-147335-0 2-147435-0 0.590 [14.99] 4-147335-1 4-147435-1 0.800 [20.32]
2-147335-1 2-147435-1 0.600 [15.24] 4-147335-2 4-147435-2 0.810 [20.57]

Note: All part numbers are RoHS compliant.


165
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

AMPMODU .045 [1.14] Square Continuous Posts

Features of .045 [1.14]


Square Continuous Posts
Brass drawn wire for posts
.400 to 1.000 [10.16 to
25.40] overall pin length
(.010 [0.25] increments)
Plating Options:
Tin
15 in. gold
30 in. gold
Star feature also available

Benefits
Less expensive than
bandolier style posts
Can be placed on printed
circuit boards at any desired
centerline
Less scrap material
(no carrier strip)

Technical Documents page 276


Continuous Posts

Application Specification
.045 Square

114-13011 TE now offers AMPMODU Potential industries include:


.045 [1.14] Square building systems,
Continuous Posts. These commercial/home
posts can be used instead equipment, household
of the original posts that appliances, home power
come on a bandolier style tools and equipment.
carrier strip. These posts The current rating is 7 amps.
are on a reel, but the posts

5 are notched at the desired


length (no carrier strip is
needed). This feature allows
The posts are available
plated with tin, 15 in. gold,
or 30 in. gold. Other plat-
ings are available upon
more versatility by providing request.
post lengths from .400 to
1.000 [10.16 to 25.40], TE application tooling is a
available in increments of modular head (Part Number
.010 [0.25]. 904640-1) placed on the
Modular Insertion System
The posts are brass drawn Bench Machine (Part
wire and are inserted into a Number 217600-1.)
printed circuit board via
application tooling at any
centerline configuration.
They can be used for wire
wrap applications or mated
to a receptacle.

Note: All part numbers are RoHS compliant.


166
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

AMPMODU .045 [1.14] Square Continuous Posts (Continued)

Pre-Plated Tin
Part Number Description Part Number Description Part Number Description
Square Square with Star Post Length Square Square with Star Post Length Square Square with Star Post Length
147070-1 147436-1 0.400 [10.16] 2-147070-2 2-147436-2 0.610 [15.49] 4-147070-3 4-147436-3 0.820 [20.83]
147070-2 147436-2 0.410 [10.41] 2-147070-3 2-147436-3 0.620 [15.75] 4-147070-4 4-147436-4 0.830 [21.08]
147070-3 147436-3 0.420 [10.67] 2-147070-4 2-147436-4 0.630 [16.00] 4-147070-5 4-147436-5 0.840 [21.34]
147070-4 147436-4 0.430 [10.92] 2-147070-5 2-147436-5 0.640 [16.26] 4-147070-6 4-147436-6 0.850 [21.59]
147070-5 147436-5 0.440 [11.18] 2-147070-6 2-147436-6 0.650 [16.51] 4-147070-7 4-147436-7 0.860 [21.84]
147070-6 147436-6 0.450 [11.43] 2-147070-7 2-147436-7 0.660 [16.76] 4-147070-8 4-147436-8 0.870 [22.10]
147070-7 147436-7 0.460 [11.68] 2-147070-8 2-147436-8 0.670 [17.02] 4-147070-9 4-147436-9 0.880 [22.35]
147070-8 147436-8 0.470 [11.94] 2-147070-9 2-147436-9 0.680 [17.27] 5-147070-0 5-147436-0 0.890 [22.61]
147070-9 147436-9 0.480 [12.19] 3-147070-0 3-147436-0 0.690 [17.53] 5-147070-1 5-147436-1 0.900 [22.86]
1-147070-0 1-147436-0 0.490 [12.45] 3-147070-1 3-147436-1 0.700 [17.78] 5-147070-2 5-147436-2 0.910 [23.11]
1-147070-1 1-147436-1 0.500 [12.70] 3-147070-2 3-147436-2 0.710 [18.03] 5-147070-3 5-147436-3 0.920 [23.37]
1-147070-2 1-147436-2 0.510 [12.95] 3-147070-3 3-147436-3 0.720 [18.29] 5-147070-4 5-147436-4 0.930 [23.62]
1-147070-3 1-147436-3 0.520 [13.21] 3-147070-4 3-147436-4 0.730 [18.54] 5-147070-5 5-147436-5 0.940 [23.88]
1-147070-4 1-147436-4 0.530 [13.46] 3-147070-5 3-147436-5 0.740 [18.80] 5-147070-6 5-147436-6 0.950 [24.13]
1-147070-5 1-147436-5 0.540 [13.72] 3-147070-6 3-147436-6 0.750 [19.05] 5-147070-7 5-147436-7 0.960 [24.38]
1-147070-6 1-147436-6 0.550 [13.97] 3-147070-7 3-147436-7 0.760 [19.30] 5-147070-8 5-147436-8 0.970 [24.64]
1-147070-7 1-147436-7 0.560 [14.22] 3-147070-8 3-147436-8 0.770 [19.56] 5-147070-9 5-147436-9 0.980 [24.89]
1-147070-8 1-147436-8 0.570 [14.48] 3-147070-9 3-147436-9 0.780 [19.81] 6-147070-0 6-147436-0 0.990 [25.15]
1-147070-9 1-147436-9 0.580 [14.73] 4-147070-0 4-147436-0 0.790 [20.07] 6-147070-1 6-147436-1 1.000 [25.40]
2-147070-0 2-147436-0 0.590 [14.99] 4-147070-1 4-147436-1 0.800 [20.32]
2-147070-1 2-147436-1 0.600 [15.24] 4-147070-2 4-147436-2 0.810 [20.57]

Pre-Plated 15 in. Gold


Part Number Description Part Number Description Part Number Description
Square Square with Star Post Length Square Square with Star Post Length Square Square with Star Post Length
147071-1 147437-1 0.400 [10.16] 2-147071-2 2-147437-2 0.610 [15.49] 4-147071-3 4-147437-3 0.820 [20.83]
147071-2 147437-2 0.410 [10.41] 2-147071-3 2-147437-3 0.620 [15.75] 4-147071-4 4-147437-4 0.830 [21.08]

Continuous Posts
147071-3 147437-3 0.420 [10.67] 2-147071-4 2-147437-4 0.630 [16.00] 4-147071-5 4-147437-5 0.840 [21.34]

.045 Square
147071-4 147437-4 0.430 [10.92] 2-147071-5 2-147437-5 0.640 [16.26] 4-147071-6 4-147437-6 0.850 [21.59]
147071-5 147437-5 0.440 [11.18] 2-147071-6 2-147437-6 0.650 [16.51] 4-147071-7 4-147437-7 0.860 [21.84]
147071-6 147437-6 0.450 [11.43] 2-147071-7 2-147437-7 0.660 [16.76] 4-147071-8 4-147437-8 0.870 [22.10]
147071-7 147437-7 0.460 [11.68] 2-147071-8 2-147437-8 0.670 [17.02] 4-147071-9 4-147437-9 0.880 [22.35]
147071-8 147437-8 0.470 [11.94] 2-147071-9 2-147437-9 0.680 [17.27] 5-147071-0 5-147437-0 0.890 [22.61]
147071-9 147437-9 0.480 [12.19] 3-147071-0 3-147437-0 0.690 [17.53] 5-147071-1 5-147437-1 0.900 [22.86]
1-147071-0 1-147437-0 0.490 [12.45] 3-147071-1 3-147437-1 0.700 [17.78] 5-147071-2 5-147437-2 0.910 [23.11]
1-147071-1 1-147437-1 0.500 [12.70] 3-147071-2 3-147437-2 0.710 [18.03] 5-147071-3 5-147437-3 0.920 [23.37]
1-147071-2 1-147437-2 0.510 [12.95] 3-147071-3 3-147437-3 0.720 [18.29] 5-147071-4 5-147437-4 0.930 [23.62]
1-147071-3 1-147437-3 0.520 [13.21] 3-147071-4 3-147437-4 0.730 [18.54] 5-147071-5 5-147437-5 0.940 [23.88]

5
1-147071-4 1-147437-4 0.530 [13.46] 3-147071-5 3-147437-5 0.740 [18.80] 5-147071-6 5-147437-6 0.950 [24.13]
1-147071-5 1-147437-5 0.540 [13.72] 3-147071-6 3-147437-6 0.750 [19.05] 5-147071-7 5-147437-7 0.960 [24.38]
1-147071-6 1-147437-6 0.550 [13.97] 3-147071-7 3-147437-7 0.760 [19.30] 5-147071-8 5-147437-8 0.970 [24.64]
1-147071-7 1-147437-7 0.560 [14.22] 3-147071-8 3-147437-8 0.770 [19.56] 5-147071-9 5-147437-9 0.980 [24.89]
1-147071-8 1-147437-8 0.570 [14.48] 3-147071-9 3-147437-9 0.780 [19.81] 6-147071-0 6-147437-0 0.990 [25.15]
1-147071-9 1-147437-9 0.580 [14.73] 4-147071-0 4-147437-0 0.790 [20.07] 6-147071-1 6-147437-1 1.000 [25.40]
2-147071-0 2-147437-0 0.590 [14.99] 4-147071-1 4-147437-1 0.800 [20.32]
2-147071-1 2-147437-1 0.600 [15.24] 4-147071-2 4-147437-2 0.810 [20.57]

Pre-Plated 30 in. Gold


Part Number Description Part Number Description Part Number Description
Square Square with Star Post Length Square Square with Star Post Length Square Square with Star Post Length
147072-1 147438-1 0.400 [10.16] 2-147072-2 2-147438-2 0.610 [15.49] 4-147072-3 4-147438-3 0.820 [20.83]
147072-2 147438-2 0.410 [10.41] 2-147072-3 2-147438-3 0.620 [15.75] 4-147072-4 4-147438-4 0.830 [21.08]
147072-3 147438-3 0.420 [10.67] 2-147072-4 2-147438-4 0.630 [16.00] 4-147072-5 4-147438-5 0.840 [21.34]
147072-4 147438-4 0.430 [10.92] 2-147072-5 2-147438-5 0.640 [16.26] 4-147072-6 4-147438-6 0.850 [21.59]
147072-5 147438-5 0.440 [11.18] 2-147072-6 2-147438-6 0.650 [16.51] 4-147072-7 4-147438-7 0.860 [21.84]
147072-6 147438-6 0.450 [11.43] 2-147072-7 2-147438-7 0.660 [16.76] 4-147072-8 4-147438-8 0.870 [22.10]
147072-7 147438-7 0.460 [11.68] 2-147072-8 2-147438-8 0.670 [17.02] 4-147072-9 4-147438-9 0.880 [22.35]
147072-8 147438-8 0.470 [11.94] 2-147072-9 2-147438-9 0.680 [17.27] 5-147072-0 5-147438-0 0.890 [22.61]
147072-9 147438-9 0.480 [12.19] 3-147072-0 3-147438-0 0.690 [17.53] 5-147072-1 5-147438-1 0.900 [22.86]
1-147072-0 1-147438-0 0.490 [12.45] 3-147072-1 3-147438-1 0.700 [17.78] 5-147072-2 5-147438-2 0.910 [23.11]
1-147072-1 1-147438-1 0.500 [12.70] 3-147072-2 3-147438-2 0.710 [18.03] 5-147072-3 5-147438-3 0.920 [23.37]
1-147072-2 1-147438-2 0.510 [12.95] 3-147072-3 3-147438-3 0.720 [18.29] 5-147072-4 5-147438-4 0.930 [23.62]
1-147072-3 1-147438-3 0.520 [13.21] 3-147072-4 3-147438-4 0.730 [18.54] 5-147072-5 5-147438-5 0.940 [23.88]
1-147072-4 1-147438-4 0.530 [13.46] 3-147072-5 3-147438-5 0.740 [18.80] 5-147072-6 5-147438-6 0.950 [24.13]
1-147072-5 1-147438-5 0.540 [13.72] 3-147072-6 3-147438-6 0.750 [19.05] 5-147072-7 5-147438-7 0.960 [24.38]
1-147072-6 1-147438-6 0.550 [13.97] 3-147072-7 3-147438-7 0.760 [19.30] 5-147072-8 5-147438-8 0.970 [24.64]
1-147072-7 1-147438-7 0.560 [14.22] 3-147072-8 3-147438-8 0.770 [19.56] 5-147072-9 5-147438-9 0.980 [24.89]
1-147072-8 1-147438-8 0.570 [14.48] 3-147072-9 3-147438-9 0.780 [19.81] 6-147072-0 6-147438-0 0.990 [25.15]
1-147072-9 1-147438-9 0.580 [14.73] 4-147072-0 4-147438-0 0.790 [20.07] 6-147072-1 6-147438-1 1.000 [25.40]
2-147072-0 2-147438-0 0.590 [14.99] 4-147072-1 4-147438-1 0.800 [20.32]
2-147072-1 2-147438-1 0.600 [15.24] 4-147072-2 4-147438-2 0.810 [20.57]

Note: All part numbers are RoHS compliant.


167
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Receptacle Assemblies, Horizontal Mount

Product Facts
All receptacle assemblies
are end stackable
Contact design employs
dual cantilever beams with
built-in anti-overstress
feature
Closed entry housings help
prevent post stubbing
Wide range of sizes
available
Other versions available
upon request
Housings made of high
temperature, surface mount
compatible thermoplastic
material, 94V-O rated
Duplex gold and matte tin
plated contacts have full
nickel underplate
Housings feature PC board
standoffs
Receptacle Assemblies
Horizontal Mount,

Solder tails accommodate


a PC board thickness of
.062 [1.57]
Horizontal Mount receptacle assemblies are available in The receptacle contact is
Recognized under the assemblies are designed to a wide range of position an established proven
Component Program of reliably and economically sizes. They have end design with a fully enclosed,
Underwriters meet the packaging and stacking capability which one-piece box to protect
Laboratories Inc., R interconnection require- gives the added advantage the contact area. In
File No. E28476 ments of todays electronics of flexibility. addition, the receptacle

5 Certified by Canadian industry, generally for appli- The housings are made of contact has dual cantilever
Standards cations using the high temperature, surface beams with a built-in
Association, R mother/daughter board mount compatible thermo- anti-overstress feature.
File No. LR 7189 arrangement. plastic material that is 94V-0 Standard solder tails
This product line is offered rated. Contacts are phos- accommodate a board
in both single and double phor bronze, fully under- thickness of .062 [1.57].
row configurations. The plated with nickel to help
.100 [2.54] centerline prevent corrosion and are
available in three plating
options.

Performance
Characteristics

Mechanical Characteristics Electrical Characteristics


Mating Force 6.0 oz. [1.67N] per Current Rating 3.0 amperes (max.)
contact (max.) for single contact; 2.0 amperes (max.)
Unmating Force .75 oz. [0.21N] per contact when connector is fully
per contact (min.) during third mating energized
cycle Contact Resistance 12 milliohms
Durability 200 cycles (max.)
Insulation Resistance
5000 megohms (min.) between adjacent
Environmental Characteristics contacts
Operating Temperature Dielectric Withstanding Voltage
-65C to +125C (at sea level) 750 V rms

168
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Mod II Receptacle Assemblies, Single-Row,


.100 [2.54] Centerline

Closed Entry, End Stackable,


Short Point-of-Contact, .320
with Standoffs [8.13]

.050 .174
.100 [1.27] Max.
[4.42]
[2.54] (2 Plc.) (Point-of-Contact)
Typ. B

Post
Material and Finish Entry
Housing Glass-filled thermoplastic, .115
.069 [2.92]
black, 94V-0 rated .137
[1.75]
[3.48] .125
Contacts Phosphor bronze, 1 2 [3.18]
plated as follows: (Localized Gold .310
Plate Area) [7.87]
Plating A Duplex .000030 [0.00076] CL CL
Pos. Ref.
gold on contact area, .000150-.000300
[0.00381-0.00762] matte tin on solder
area all over .000050 [0.00127] nickel B +.005
Plating B Duplex .000010 PC Board .060 -.000
.100*
[0.000254] gold on contact area, (Ref.) [2.54] Typ. [ 1.52
.060 ]
+.0.13
-.000

Receptacle Assemblies
.000150-.000300 [0.00381-0.00762]

Horizontal Mount,
matte tin on solder area all over .000050
[0.00127] nickel
.310
Plating C .000150-.000300 [7.87]
[0.00381-0.00762] matte tin on solder
leads, all over .000050 [0.00127] nickel

.035.003 Dia.
Related Product Data [0.890.08] Typ.

Mateable Headers Recommended PC Board Hole Layout


(for .062 [1.57] thick PC board)

5
Refer to the Mating Post Selection
Guide page 90 *.003 [0.08] tolerances not to accumulate
within one connector pattern.
Performance Characteristics
page 168 No. of Dimensions Contact Plating/Part Nos.
Pos. A B Plating A Plating B Plating C
2 .200 [5.08] .100 [2.54] 5535676-1 5146139-1 5535677-1
Technical Documents page 276 3 .300 [7.62] .200 [5.08] 5535676-2 5146139-2 5535677-2
Product Specification 4 .400 [10.16] .300 [7.62] 5535676-3 5146139-3 5535677-3
108-25026 5 .500 [12.70] .400 [10.16] 5535676-4 5146139-4 5535677-4
Application Specification 6 .600 [15.24] .500 [12.70] 5535676-5 5146139-5 5535677-5
114-25018 7 .700 [17.78] .600 [15.24] 5535676-6 5146139-6 5535677-6
8 .800 [20.32] .700 [17.78] 5535676-7 5146139-7 5535677-7
Additional receptacle assembly 9 .900 [22.86] .800 [20.32] 5535676-8 5146139-8 5535677-8
sizes are available; minimum order 10 1.000 [25.40] .900 [22.86] 5535676-9 5146139-9 5535677-9
quantities may apply. Consult TE.
11 1.100 [27.94] 1.000 [25.40] 1-5535676-0 1-5146139-0 1-5535677-0
12 1.200 [30.48] 1.100 [27.94] 1-5535676-1 1-5146139-1 1-5535677-1
13 1.300 [33.02] 1.200 [30.48] 1-5535676-2 1-5146139-2 1-5535677-2
14 1.400 [35.56] 1.300 [33.02] 1-5535676-3 1-5146139-3 1-5535677-3
15 1.500 [38.10] 1.400 [35.56] 1-5535676-4 1-5146139-4 1-5535677-4
Keying Plug 16 1.600 [40.64] 1.500 [38.10] 1-5535676-5 1-5146139-5 1-5535677-5
17 1.700 [43.18] 1.600 [40.64] 1-5535676-6 1-5146139-6 1-5535677-6
18 1.800 [45.72] 1.700 [43.18] 1-5535676-7 1-5146139-7 1-5535677-7
19 1.900 [48.26] 1.800 [45.72] 1-5535676-8 1-5146139-8 1-5535677-8
20 2.000 [50.80] 1.900 [48.26] 1-5535676-9 1-5146139-9 1-5535677-9
30 3.000 [76.20] 2.900 [73.66] 2-5535676-9 2-5146139-9 2-5535677-9
Part No. 86286-1 40 4.000 [101.60] 3.900 [99.06] 3-5535676-9 3-5146139-9 3-5535677-9
(Plugs into receptacle contact)
Note: 1. TE recommends mating gold or duplex plated headers with duplex plated receptacle assemblies.
Material Natural color nylon Note: All part numbers are RoHS compliant.
169
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Mod II Receptacle Assemblies, Double-Row,


.100 x .100 [2.54 x 2.54] Centerlines
Closed Entry, End Stackable,
Short Point-of-Contact, .320
[8.13]
with Standoffs

.174
.050 [4.42] Max.
[1.27] (Point-of-Contact)
(2 Plc.)
.100 B
.118
[2.54] [3.00]
Typ. .100
[2.54] Post (Localized Gold
.238 Plate Area)
Entry [6.05]

.069
Material and Finish [1.75] .115
1 2 [2.92]
Housing Glass-filled thermoplastic,
.125 .310
black, 94V-0 rated Pos. Ref.
[3.18] CL [7.87] CL
Contacts Phosphor bronze, (Localized Gold
plated as follows: Plate Area)

Plating A Duplex .000030 [0.00076]


gold on contact area, .000150-.000300 B +.005
PC Board .100* .060 -.000
[0.00381-0.00762] matte tin on solder
area all over .000050 [0.00127] nickel
(Ref.) [2.54]
Typ.
[ .060
1.52 ]
+0.13
-.000
Receptacle Assemblies
Horizontal Mount,

Plating B Duplex .000010


[0.000254] gold on contact area, .310
.000150-.000300 [0.00381-0.00762] [7.87]
matte tin on solder area all over .000050
[0.00127] nickel
Plating C .000150-.000300 .035.003 Dia.
[0.00381-0.00762] matte tin on solder [0.890.08] Typ.
leads, all over .000050 [0.00127] nickel
Recommended PC Board Hole Layout
(for .062 [1.57] thick PC board)

5 Related Product Data *.003 [0.08] tolerances not to accumulate


within one connector pattern.
Mateable Headers
Refer to the Mating Post Selection No. of Dimensions Contact Plating/Part Nos.
Guide page 90 Pos. A B Plating A Plating B Plating C
Performance Characteristics 4 .200 [5.08] .100 [2.54] 6-5535512-1 5146140-1 6-5102084-4
page 168 6 .300 [7.62] .200 [5.08] 6-5535512-2 5146140-2 6-5102084-3
8 .400 [10.16] .300 [7.62] 6-5535512-3 5146140-3 6-5102084-2
10 .500 [12.70] .400 [10.16] 6-5535512-4 5146140-4 6-5102084-1
Technical Documents page 276 12 .600 [15.24] .500 [12.70] 5535512-1 5146140-5 6-5102084-0
Product Specification 14 .700 [17.78] .600 [15.24] 1-5535512-7 5146140-6 5-5102084-9
108-25026 16 .800 [20.32] .700 [17.78] 1-5535512-8 5146140-7 5-5102084-8
Application Specification 18 .900 [22.86] .800 [20.32] 1-5535512-6 5146140-8 5-5102084-7
114-25018 20 1.000 [25.40] .900 [22.86] 5535512-2 5146140-9 5-5102084-6
22 1.100 [27.94] 1.000 [25.40] 1-5535512-9 1-5146140-0 5-5102084-5
Additional receptacle assembly 24 1.200 [30.48] 1.100 [27.94] 5535512-3 1-5146140-1 5-5102084-4
sizes are available; minimum order 26 1.300 [33.02] 1.200 [30.48] 2-5535512-0 1-5146140-2 5-5102084-3
quantities may apply. Consult TE.
28 1.400 [35.56] 1.300 [33.02] 2-5535512-1 1-5146140-3 5-5102084-2
30 1.500 [38.10] 1.400 [35.56] 2-5535512-2 1-5146140-4 5-5102084-1
32 1.600 [40.64] 1.500 [38.10] 2-5535512-3 1-5146140-5 5-5102084-0
34 1.700 [43.18] 1.600 [40.64] 5535512-4 1-5146140-6 4-5102084-9
36 1.800 [45.72] 1.700 [43.18] 5535512-5 1-5146140-7 4-5102084-8
38 1.900 [48.26] 1.800 [45.72] 2-5535512-4 1-5146140-8 4-5102084-7
40 2.000 [50.80] 1.900 [48.26] 2-5535512-5 1-5146140-9 4-5102084-6
50 2.500 [63.50] 2.400 [60.96] 5535512-7 2-5146140-0 4-5102084-1
60 3.000 [76.20] 2.900 [73.66] 3-5535512-0 2-5146140-1 3-5102084-6
Notes: 1. TE recommends mating gold or duplex plated headers with duplex plated receptacle assemblies.
2. .256 [6.50] minimum positive pin stop to prevent shorting between row.

Note: All part numbers are RoHS compliant.


170
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Mod II Surface Mount Horizontal Receptacle Assemblies,


.100 x .100 [2.54 x 2.54] Centerline
Product Facts
Surface mount leads
All receptacle assemblies
are end stackable
Contact design employs
dual cantilever beams
with built-in anti-overstress
feature
Closed entry housings help
prevent post stubbing
Housings made of high
temperature, surface mount
compatible thermoplastic
material, 94 V-0 rated
Duplex gold and matte tin
plated contacts have full
nickel underplate
Housings feature PC board
standoffs
Recognized under the

Receptacle Assemblies
Component Program of

Horizontal Mount,
Underwriters
Laboratories Inc., R

File No. E28476


Certified by Canadian
Standards Horizontal surface mount double row configurations. are phosphor bronze, fully
Association, R
receptacle assemblies are The .100 [2.54] centerline underplated with nickel to
File No. LR 7189 designed to reliably and assemblies are available in help prevent corrosion and
economically meet the 2-40 (single row) positions are available in three plating
packaging and interconnec- and 4-80 (double row) options.
tion requirements of todays
electronics industry as
process technologies evolve
from wave soldering to sur-
positions. Housings are
end stackable, which gives
the advantage of added
flexibility.
The receptacle contact is
an established proven
design, with a fully enclosed
5
one-piece "box" to protect
face mount processing. The housings are made of the contact beams with
This broad product line is high temperature material built-in anti-overstress
offered in both single and that is 94V-0 rated. Contacts feature.

Performance
Characteristics

Mechanical Characteristics Electrical Characteristics


Mating Force 6.0 oz. [1.67N] per Current Rating 3.0 amperes (max.)
contact (max.) for single contact; 2.0 amperes (max.)
Unmating Force .75 oz. [0.21N] per contact when connector is fully
per contact (min.) during third mating energized
cycle Contact Resistance 12 milliohms
Durability 200 cycles (max.)
Insulation Resistance 5000
megohms (min.) between adjacent
Environmental Characteristics contacts
Operating Temperature Dielectric Withstanding Voltage
-65C to +125C (at sea level) 750 V rms
171
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Mod II Receptacle Assemblies, Single-Row, Surface Mount


.100 [2.54] Centerline

Closed Entry, End Stackable,


Short Point-of-Contact,
with Standoffs
.320
[8.13]

.100
[2.54] .050
Typ. [1.27]
.174
[4.42] Max.
X (Point-of-Contact)

Material and Finish


Housing Glass-filled thermoplastic,
.137 .125
black, 94V-0 rated [3.48] .069
[3.18]
X [1.75]
Contacts Phosphor bronze, .008 (Localized Gold
plated as follows: .005 .388.010 Plate Area)
Pos. No.
[0.20] Ref. Typ. [9.850.25]
Plating A Duplex .000030 [0.13]
[0.00076] gold on contact area, Typ. Section XX
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
.100
[0.00127] nickel [2.54] .060
Plating B Duplex .000010 Typ. [1.52] Typ.
Receptacle Assemblies

[0.000254] gold on contact area,


Horizontal Mount,

.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel .356
Plating C .000150-.000300 [9.04]
[0.00381-0.00762] matte tin on solder
leads, all over .000050 [0.00127] nickel

.090
[2.29] Typ.
Related Product Data
Recommended Etched Circuit Layout

5
Mateable Headers
(for .040 [1.02] min. thick PC Board;
Refer to the Mating Post Selection
.008 [0.20] thick stencil)
Guide page 90
Performance Characteristics
page 171 No. of Dimension Contact Plating/Part Nos.
Pos. A Plating A Plating B Plating C
2 .200 [5.08] 5147721-1 5147732-1 5147733-1
Technical Documents page 276 3 .300 [7.62] 5147721-2 5147732-2 5147733-2
Product Specification 4 .400 [10.16] 5147721-3 5147732-3 5147733-3
108-25026 5 .500 [12.70] 5147721-4 5147732-4 5147733-4
Application Specification 6 .600 [15.24] 5147721-5 5147732-5 5147733-5
114-25018 7 .700 [17.78] 5147721-6 5147732-6 5147733-6
8 .800 [20.32] 5147721-7 5147732-7 5147733-7
Additional receptacle assembly 9 .900 [22.86] 5147721-8 5147732-8 5147733-8
sizes are available; minimum order 10 1.000 [25.40] 5147721-9 5147732-9 5147733-9
quantities may apply. Consult TE.
11 1.100 [27.94] 1-5147721-0 1-5147732-0 1-5147733-0
12 1.200 [30.48] 1-5147721-1 1-5147732-1 1-5147733-1
13 1.300 [33.02] 1-5147721-2 1-5147732-2 1-5147733-2
14 1.400 [35.56] 1-5147721-3 1-5147732-3 1-5147733-3
Keying Plug 15 1.500 [38.10] 1-5147721-4 1-5147732-4 1-5147733-4
16 1.600 [40.64] 1-5147721-5 1-5147732-5 1-5147733-5
17 1.700 [43.18] 1-5147721-6 1-5147732-6 1-5147733-6
18 1.800 [45.72] 1-5147721-7 1-5147732-7 1-5147733-7
19 1.900 [48.26] 1-5147721-8 1-5147732-8 1-5147733-8
20 2.000 [50.80] 1-5147721-9 1-5147732-9 1-5147733-9
Part No. 86286-1 30 3.000 [76.20] 2-5147721-9 2-5147732-9 2-5147733-9
(Plugs into receptacle contact) 40 4.000[101.60] 3-5147721-9 3-5147732-9 3-5147733-9

Material Natural color nylon Note: All part numbers are RoHS compliant.
172
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Mod II Receptacle Assemblies, Double-Row, Surface Mount


.100 [2.54] Centerline

Closed Entry, End Stackable,


Short Point-of-Contact,
.320
with Standoffs [8.13]

.174
A [4.42] Max.
.050
.100 (Point-of-Contact)
[1.27]
[2.54] .118
Ref.
.100 Typ. [3.00]
[2.54] .256
(Localized Gold
[6.51]
Plate Area)
Post
Stop
.238
[6.05]

Material and Finish


Housing Glass-filled thermoplastic, .008
.005 .125
black, 94V-0 rated [0.20] [3.18]
Contacts Phosphor bronze, [0.13] .069 .388.010 (Localized Gold
plated as follows: Typ. [1.75] [9.850.25] Plate Area)
.100
Plating A Duplex .000030 [2.54]
[0.00076] gold on contact area, Typ. .060
[1.52] Typ.
.000150-.000300 [0.00381-0.00762]

Receptacle Assemblies
matte tin on solder area all over .000050

Horizontal Mount,
[0.00127] nickel
Plating B Duplex .000010
[0.000254] gold on contact area,
.356
.000150-.000300 [0.00381-0.00762] [9.04]
matte tin on solder area all over .000050
[0.00127] nickel
Plating C .000150-.000300
[0.00381-0.00762] matte tin on solder
leads, all over .000050 [0.00127] nickel .090

5
[2.29] Typ.
Recommended Etched Circuit Layout
Related Product Data (for .040 [1.02] min thick PC Board;
.008 [0.20] thick stencil)
Mateable Headers
Refer to the Mating Post Selection
Guide page 90 Contact Plating/Part Nos.
No. of Dimension
Performance Characteristics Pos. A Plating A Plating B Plating C
page 171 4 .200 [5.08] 5147722-1 5147734-1 5147735-1
6 .300 [7.62] 5147722-2 5147734-2 5147735-2
8 .400 [10.16] 5147722-3 5147734-3 5147735-3
Technical Documents page 276 10 .500 [12.70] 5147722-4 5147734-4 5147735-4
Product Specification 12 .600 [15.24] 5147722-5 5147734-5 5147735-5
108-25026 14 .700 [17.78] 5147722-6 5147734-6 5147735-6
Application Specification 16 .800 [20.32] 5147722-7 5147734-7 5147735-7
114-25018 18 .900 [22.86] 5147722-8 5147734-8 5147735-8
20 1.000 [25.40] 5147722-9 5147734-9 5147735-9
Additional receptacle assembly 22 1.100 [27.94] 1-5147722-0 1-5147734-0 1-5147735-0
sizes are available; minimum order
quantities may apply. Consult TE. 24 1.200 [30.48] 1-5147722-1 1-5147734-1 1-5147735-1
26 1.300 [33.02] 1-5147722-2 1-5147734-2 1-5147735-2
28 1.400 [35.56] 1-5147722-3 1-5147734-3 1-5147735-3
30 1.500 [38.10] 1-5147722-4 1-5147734-4 1-5147735-4
32 1.600 [40.64] 1-5147722-5 1-5147734-5 1-5147735-5
34 1.700 [43.18] 1-5147722-6 1-5147734-6 1-5147735-6
36 1.800 [45.72] 1-5147722-7 1-5147734-7 1-5147735-7
38 1.900 [48.26] 1-5147722-8 1-5147734-8 1-5147735-8
40 2.000 [50.80] 1-5147722-9 1-5147734-9 1-5147735-9
50 2.500 [63.50] 2-5147722-4 2-5147734-4 2-5147735-4
Note: All part numbers are RoHS
compliant. 60 3.000 [76.20] 2-5147722-9 2-5147734-9 2-5147735-9

173
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Receptacle Assemblies, Vertical Mount

Product Facts
Dual-cantilever beam
contact with box design
Single-row assemblies
have .100 [2.54] centerline
contact spacing; double-row
assemblies have .100 x .100
[2.54 x 2.54] centerline
contact spacing
3 through 40 positions in
single-row assemblies;
2 through 80 positions in
double-row assemblies
Mod II Standard .340 [8.64]
and Mod IV low
.265 [6.73] profiles
Mod II and Mod IV profiles
available in dual entry
Duplex gold and matte tin
plated contacts have full
nickel underplate
Thermoplastic housings,
Receptacle Assemblies

94V-0 rated
Vertical Mount,

Standoffs for easy flux


cleaning
All throughhole assemblies Vertical receptacle row) positions and 2-80 The receptacle contact is
are end stackable assemblies are designed to (double row) positions. an established proven
Recognized under the reliably and economically Standard and low profile design, with a fully enclosed
Component Program of meet the packaging and housings which are end one-piece box to protect
Underwriters interconnection stackable also enhance the the contact beams.
Laboratories Inc., requirements of todays product line giving the These assemblies are

5 electronics industry. advantage of added


R

File No. E28476 offered in .265 [6.73]


This broad product line flexibility. (Mod IV) and .340[8.64]
Certified by Canadian
Standards offers a wide variety of The housings are made of (Mod II) high profiles.
Association, R assembly styles and flame retardant material that Standard solder tails
File No. LR 7189 features. They are available is 94 V-0 rated. Contacts accommodate board
in dual entry style, in both are phosphor bronze, fully thickness of .062 [1.57].
single and double row underplated with nickel to Product styles include
configurations. The .100 help prevent corrosion and single and dual tine
[2.54] centerline assemblies are available in three plating variations. Outrigger tine
are available in 3-40 (single options. styles are also available for
bottom entry parallel board
stacking applications.

Performance
Characteristics
Mechanical Characteristics Electrical Characteristics
Mating Force 9.0 oz. [2.5N] per Current Rating 3.0 amperes (max.)
contact (max.) for single contact; 2.0 amperes (max.)
Unmating Force 1.5 oz. [0.42N] per contact when connector is fully
per contact (min.) energized
Durability (Tested to) 200 cycles Contact Resistance 12 milliohms
(max.)
Insulation Resistance 5000
Environmental Characteristics megohms (min.) between adjacent
Operating Temperature contacts
-65C to +125C Dielectric Withstanding Voltage
(at sea level) 750 V rms
174
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Mod II Receptacle Assemblies, Single-Row,


.100 [2.54] Centerline
Closed Top Entry, .020
[0.51]
X
End Stackable, with (Standoffs)
Single Tine Contacts

.340
[8.64]

X
.148 Point of
A [3.76] Contact .115
[2.92]
.107 Ref.
.140 [2.72]
Material and Finish [3.56] (Localized Gold
Plate Area)
Housing Glass-filled thermoplastic,
black, 94V-0 rated
Contacts Phosphor bronze,
plated as follows:
.100.003 .050
Plating A Duplex .000030 [2.540.08] [1.27]
[0.00076] gold on contact area, Max.
.000150-.000300 [0.00381-0.00762] Typ.
matte tin on solder area all over .000050
[0.00127] nickel

Receptacle Assemblies
Plating B Duplex .000010 B
[0.000254] gold on contact area,

Vertical Mount,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
.035.003 Dia.
Plating C .000150-.000300 .100
[0.890.08] Typ.
[2.54]
[0.00381-0.00762] matte tin on solder
leads, all over .000050 [0.00127] nickel
Recommended PC Board Hole Layout

Related Product Data


Mateable Headers
Refer to the Mating Post Selection
Guide page 90
Performance Characteristics
No. of
Pos.
3
A
Dimensions

.300 [7.62]
B
.200 [5.08]
Plating A
5-534237-1
Contact Plating/Part Nos.
Plating B
5-146386-1
Plating C
5-146763-5
5
page 174
4 .400 [10.16] .300 [7.62] 5-534237-2 6-146386-9 5-146763-6
5 .500 [12.70] .400 [10.16] 5-534237-3 5-146386-2 5-146763-7
Technical Documents page 276
6 .600 [15.24] .500 [12.70] 5-534237-4 5-146386-3 5-146763-8
Product Specification 7 .700 [17.78] .600 [15.24] 5-534237-5 5-146386-4 5-146763-1
108-25022 8 .800 [20.32] .700 [17.78] 5-534237-6 5-146386-5 5-146763-2
Application Specification 9 .900 [22.86] .800 [20.32] 5-534237-7 5-146386-6 5-146763-9
114-25018 10 1.000 [25.40] .900 [22.86] 5-534237-8 5-146386-7 5-146763-3
Additional receptacle assembly 11 1.100 [27.94] 1.000 [25.40] 5-534237-9 5-146386-8 6-146763-0
sizes are available; minimum order 12 1.200 [30.48] 1.100 [27.94] 6-534237-0 5-146386-9 6-146763-1
quantities may apply. Consult TE. 13 1.300 [33.02] 1.200 [30.48] 6-534237-1 6-146386-0 6-146763-2
14 1.400 [35.56] 1.300 [33.02] 6-534237-2 6-146386-1 6-146763-3
15 1.500 [38.10] 1.400 [35.56] 6-534237-3 7-146386-0 6-146763-4
16 1.600 [40.64] 1.500 [38.10] 6-534237-4 7-146386-1 6-146763-5
17 1.700 [43.18] 1.600 [40.64] 6-534237-5 7-146386-2 6-146763-6
Keying Plug 18 1.800 [45.72] 1.700 [43.18] 6-534237-6 7-146386-3 6-146763-7
19 1.900 [48.26] 1.800 [45.72] 6-534237-7 7-146386-4 6-146763-8
20 2.000 [50.80] 1.900 [48.26] 6-534237-8 6-146386-2 6-146763-9
30 3.000 [76.20] 2.900 [73.66] 7-534237-8 6-146386-8 7-146763-8
40 4.000 [101.60] 3.900 [99.06] 8-534237-8 8-146386-8 8-146763-8
Notes: 1. TE recommends mating gold or duplex plated headers with duplex plated receptacle
Part No. 86286-1 assemblies.
(Plugs into receptacle contact) 2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to
Material Natural color nylon the maximum point-of-contact dimension.

Note: All part numbers are RoHS compliant.


175
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Mod II Receptacle Assemblies, Double-Row,


.100 x .100 [2.54 x 2.54] Centerline
Closed Top Entry, .020
[0.51]
Side and End Stackable (Standoffs)
.100 x .100 [2.54 x 2.54]
Centerline, .100 [2.54]
Tine Spacing

.340
[8.64]
A
.148
.050 [3.77] Point of
[1.27] Typ. Contact
Max.
Typ. .107
[2.72] .100
Material and Finish .100.003 Typ. [2.54]
[2.540.08] (Localized Typ.
Housing Glass-filled thermoplastic, Gold Plate
.198
black, 94V-0 rated [5.03]
Area)
Contacts Phosphor bronze,
plated as follows:
Plating A Duplex .000030 .115.010
[0.00076] gold on contact area, .100 [2.920.25]
[2.54] Ref.
.000150-.000300 [0.00381-0.00762] Typ.
Receptacle Assemblies

matte tin on solder area all over .000050 B


.100
[2.54]
Vertical Mount,

[0.00127] nickel .100


Typ.
[2.54]
Plating B Duplex .000010 Typ.
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
.035.003 Dia.
Plating C .000150-.000300 [0.890.08]
[0.00381-0.00762] matte tin on solder
leads, all over .000050 [0.00127] nickel Recommended PC Board Hole Layout
(for .062 [1.57] thick PC board)

5 Related Product Data


Mateable Headers
No. of
Pos. A
Dimensions
B Plating A
Contact Plating/Part Nos.
Plating B Plating C
Refer to the Mating Post Selection 2 .100 [2.54] 5-534206-1 5-147424-1 5-146762-8
Guide page 90 4 .200 [5.08] .100 [2.54] 5-534206-2 5-147424-2 5-146762-9
Performance Characteristics 6 .300 [7.62] .200 [5.08] 5-534206-3 5-147424-3 6-146762-0
page 174 8 .400 [10.16] .300 [7.62] 5-534206-4 5-147424-4 5-146762-1
10 .500 [12.70] .400 [10.16] 5-534206-5 5-147424-5 5-146762-2
12 .600 [15.24] .500 [12.70] 5-534206-6 5-147424-6 6-146762-1
Technical Documents page 276 14 .700 [17.78] .600 [15.24] 5-534206-7 5-147424-7 6-146762-2
Product Specification 16 .800 [20.32] .700 [17.78] 5-534206-8 5-147424-8 6-146762-3
108-25022 18 .900 [22.86] .800 [20.32] 5-534206-9 5-147424-9 5-146762-3
Application Specification 20 1.000 [25.40] .900 [22.86] 6-534206-0 6-147424-0 5-146762-7
114-25018 22 1.100 [27.94] 1.000 [25.40] 6-534206-1 6-147424-1 6-146762-4
Additional receptacle assembly 24 1.200 [30.48] 1.100 [27.94] 6-534206-2 6-147424-2 6-146762-5
sizes are available; minimum order 26 1.300 [33.02] 1.200 [30.48] 6-534206-3 6-147424-3 6-146762-6
quantities may apply. Consult TE. 28 1.400 [35.56] 1.300 [33.02] 6-534206-4 6-147424-4 6-146762-7
30 1.500 [38.10] 1.400 [35.56] 6-534206-5 6-147424-5 5-146762-4
32 1.600 [40.64] 1.500 [38.10] 6-534206-6 6-147424-6 6-146762-8
34 1.700 [43.18] 1.600 [40.64] 6-534206-7 6-147424-7 6-146762-9
Keying Plug 36 1.800 [45.72] 1.700 [43.18] 6-534206-8 6-147424-8 7-146762-0
38 1.900 [48.26] 1.800 [45.72] 6-534206-9 6-147424-9 7-146762-1
40 2.000 [50.80] 1.900 [48.26] 7-534206-0 7-147424-0 5-146762-5
Notes: 1. TE recommends mating gold or duplex plated headers with duplex plated receptacle
Part No. 86286-1 assemblies.
(Plugs into receptacle contact) 2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to
the maximum point-of-contact dimension.
Material Natural color nylon
Note: All part numbers are RoHS compliant.
176
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Mod IV Receptacle Assemblies, Single-Row,


.100 [2.54] Centerline
Dual Entry, End Stackable,
Contact Typ.
Low Profile with Dual Tine
.020
Contacts [0.51]
Typ.

.268 .247
Typ. Ref.
[6.79] [6.29]

A
.050
Material and Finish [1.27]
.148
.115
[3.76]
2 Plcs. [2.92]
Housing Glass-filled thermoplastic, A Typ.
Typ.
black, 94V-0 rated
Contacts Phosphor bronze,
plated as follows: .140
Plating A Duplex .000030 [3.56] .108
A [2.74]
[0.00076] gold on contact area, Typ. Section A-A
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
B
[0.00127] nickel
.067-.064
Plating B Duplex .000010 [1.70-1.63]
[0.000254] gold on contact area, .100

Receptacle Assemblies
Typ.
[2.54]
.000150-.000300 [0.00381-0.00762]

Vertical Mount,
matte tin on solder area all over .000050
[0.00127] nickel
Plating C .000150-.000300
Recommended PC Board Hole Layout
[0.00381-0.00762] matte tin on solder
leads, all over .000050 [0.00127] nickel

Related Product Data


Mateable Headers
Refer to the Mating Post Selection
Guide page 90
Performance Characteristics
page 174
No. of
Pos.
3
4
A
Dimensions

.300 [7.62]
.400 [10.16]
B
.200 [5.08]
.300 [7.62]
Plating A
8-87879-7
8-87879-6
Contact Plating/Part Nos.
Plating B
5-147326-1
5-147326-2
Plating C
5-102742-4
5-102742-8
5
5 .500 [12.70] .400 [10.16] 8-87879-8 5-147326-3 5-102742-9
6 .600 [15.24] .500 [12.70] 5-87879-3 5-147326-4 6-102742-0
Technical Documents page 276 7 .700 [17.78] .600 [15.24] 5-87879-4 5-147326-5 5-102742-7
Product Specification 8 .800 [20.32] .700 [17.78] 5-87879-1 5-147326-6 5-102742-3
108-25022 9 .900 [22.86] .800 [20.32] 5-87879-5 5-147326-7 5-102742-6
Application Specification 10 1.000 [25.40] .900 [22.86] 5-87879-2 5-147326-8 6-102742-1
114-25018 11 1.100 [27.94] 1.000 [25.40] 5-87879-6 5-147326-9 5-102742-1
Additional receptacle assembly 12 1.200 [30.48] 1.100 [27.94] 5-87879-7 6-147326-0 5-102742-2
sizes are available; minimum order 13 1.300 [33.02] 1.200 [30.48] 5-87879-8 6-147326-1 6-102742-2
quantities may apply. Consult TE.
14 1.400 [35.56] 1.300 [33.02] 5-87879-9 6-147326-2 6-102742-3
15 1.500 [38.10] 1.400 [35.56] 6-87879-0 6-147326-3 6-102742-4
16 1.600 [40.64] 1.500 [38.10] 6-87879-1 6-147326-4 5-102742-5
17 1.700 [43.18] 1.600 [40.64] 6-87879-2 6-147326-5 6-102742-5
18 1.800 [45.72] 1.700 [43.18] 6-87879-3 6-147326-6 6-102742-6
19 1.900 [48.26] 1.800 [45.72] 6-87879-4 6-147326-7 6-102742-7
Keying Plug 20 2.000 [50.80] 1.900 [48.26] 6-87879-5 6-147326-8 6-102742-8
30 3.000 [76.20] 2.900 [73.66] 7-87879-5 7-147326-8 7-102742-8
40 4.000 [101.60] 3.900 [99.06] 8-87879-5 8-147326-8 8-102742-8
Notes: 1. TE recommends mating gold or duplex plated headers with duplex plated receptacle
Part No. 86286-1 assemblies.
(Plugs into receptacle contact) 2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to
the maximum point-of-contact dimension and .062 for recommended board thickness.

Material Natural color nylon


Note: All part numbers are RoHS compliant.
177
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Mod IV Receptacle Assemblies, Single-Row,


.100 [2.54] Centerline
Closed Top Entry, .020
[0.51]
End Stackable, Low Profile X (Standoffs)
with Single Tine Contacts

.245
[6.22]

.148 Point of
A [3.76] Contact .125
[3.18]
.140 Ref.
.107
[3.56]
[2.72]
Material and Finish (Localized
Gold Plate
Housing Glass-filled thermoplastic, Area)
black, 94V-0 rated
Contacts Phosphor bronze, .050 Section XX
.100.003
plated as follows: [2.540.08] [1.27]
Plating A Duplex .000030 [0.00076] Max.
Typ.
gold on contact area, .000150-.000300
[0.00381-0.00762] matte tin on solder
B
area all over .000050 [0.00127] nickel
Receptacle Assemblies

Plating B Duplex .000010


Vertical Mount,

[0.000254] gold on contact area,


.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050 .035.003 Dia.
.100
[0.00127] nickel [2.54] [0.880.08] Typ.
Plating C .000150-.000300
[0.00381-0.00762] matte tin on solder
leads, all over .000050 [0.00127] nickel Recommended PC Board Hole Layout
(for .062 [1.57] thick PC board)

Related Product Data

5 Mateable Headers
Refer to the Mating Post Selection
Guide page 90
No. of
Pos.
3
A
Dimensions

.300 [7.62]
B
.200 [5.08]
Plating A
5-535541-1
Contact Plating/Part Nos.
Plating B
5-146138-1
Plating C
5-535584-3
Performance Characteristics 4 .400 [10.16] .300 [7.62] 5-535541-2 5-146138-2 5-535584-4
page 174 5 .500 [12.70] .400 [10.16] 5-535541-3 5-146138-3 5-535584-5
6 .600 [15.24] .500 [12.70] 5-535541-4 5-146138-4 5-535584-1
7 .700 [17.78] .600 [15.24] 5-535541-5 5-146138-5 5-535584-6
Technical Documents page 276 8 .800 [20.32] .700 [17.78] 5-535541-6 5-146138-6 5-535584-7
Product Specification 9 .900 [22.86] .800 [20.32] 5-535541-7 5-146138-7 5-535584-8
108-25022 10 1.000 [25.40] .900 [22.86] 5-535541-8 5-146138-8 5-535584-9
Application Specification 11 1.100 [27.94] 1.000 [25.40] 5-535541-9 5-146138-9 6-535584-0
114-25018 12 1.200 [30.48] 1.100 [27.94] 6-535541-0 6-146138-0 6-535584-1
13 1.300 [33.02] 1.200 [30.48] 6-535541-1 6-146138-1 6-535584-2
Additional receptacle assembly
14 1.400 [35.56] 1.300 [33.02] 6-535541-2 6-146138-2 6-535584-3
sizes are available; minimum order
quantities may apply. Consult TE. 15 1.500 [38.10] 1.400 [35.56] 6-535541-3 6-146138-3 6-535584-4
16 1.600 [40.64] 1.500 [38.10] 6-535541-4 6-146138-4 6-535584-5
17 1.700 [43.18] 1.600 [40.64] 6-535541-5 6-146138-5 6-535584-6
18 1.800 [45.72] 1.700 [43.18] 6-535541-6 6-146138-6 5-535584-2
19 1.900 [48.26] 1.800 [45.72] 6-535541-7 6-146138-7 6-535584-7
20 2.000 [50.80] 1.900 [48.26] 6-535541-8 6-146138-8 6-535584-8
30 3.000 [76.20] 2.900 [73.66] 7-535541-9 7-146138-9 6-535584-9
40 4.000 [101.60] 3.900 [99.06] 8-535541-9 8-146138-9 7-535584-0
Notes: 1. TE recommends mating gold or duplex plated headers with select gold plated receptacle assemblies.
2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to
the maximum point-of-contact dimension.

Note: All part numbers are RoHS compliant.


178
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Mod IV Receptacle Assemblies, Double-Row,


.100 x .100 [2.54 x 2.54] Centerline
Closed Top Entry, .020
[0.51]
End and Side Stackable, (Standoffs)
Low Profile, .100 x .100
[2.54 x 2.54] Centerline,
.100 [2.54] Tine Spacing

.245
[6.22]
A
.148
.050 [3.77] Point of
[1.27] Typ. Contact
Max.
Typ. .107
[2.72] .100
Typ. [2.54]
Material and Finish .100.003
(Localized Typ.
[2.540.08]
Gold Plate
Housing Glass-filled thermoplastic, .198 Area)
black, 94V-0 rated [5.03]

Contacts Phosphor bronze,


plated as follows:
.125.010
Plating A Duplex .000030 [0.00076] .100 [3.180.25]
gold on contact area, .000150-.000300 [2.54] Typ.
[0.00381-0.00762] matte tin on solder Typ.
area all over .000050 [0.00127] nickel .100

Receptacle Assemblies
B [2.54]
Plating B Duplex .000010 .100

Vertical Mount,
Typ.
[0.000254] gold on contact area, [2.54]
Typ.
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
Plating C .000150-.000300
.035.003
[0.00381-0.00762] matte tin on solder [0.890.08]
Dia.
leads, all over .000050 [0.00127] nickel
Recommended PC Board Hole Layout

Related Product Data


Mateable Headers
Refer to the Mating Post Selection
Guide page 90
No. of
Pos.
2
A
.100 [2.54]
Dimensions


B Plating A
5-534998-1
Contact Plating/Part Nos.
Plating B
5-535598-2
Plating C
5-535585-3
5
Performance Characteristics 4 .200 [5.08] .100 [2.54] 5-534998-2 5-535598-3 5-535585-4
page 174 6 .300 [7.62] .200 [5.08] 5-534998-3 5-535598-4 5-535585-5
8 .400 [10.16] .300 [7.62] 5-534998-4 5-535598-5 5-535585-6
10 .500 [12.70] .400 [10.16] 5-534998-5 5-535598-6 5-535585-1
Technical Documents page 276 12 .600 [15.24] .500 [12.70] 5-534998-6 5-535598-7 5-535585-2
Product Specification 14 .700 [17.78] .600 [15.24] 5-534998-7 5-535598-1 5-535585-7
108-25022 16 .800 [20.32] .700 [17.78] 5-534998-8 5-535598-8 5-535585-8
Application Specification 18 .900 [22.86] .800 [20.32] 5-534998-9 5-535598-9 5-535585-9
114-25018 20 1.000 [25.40] .900 [22.86] 6-534998-0 6-535598-0 6-535585-0
22 1.100 [27.94] 1.000 [25.40] 6-534998-1 6-535598-1 6-535585-1
24 1.200 [30.48] 1.100 [27.94] 6-534998-2 6-535598-2 6-535585-2
26 1.300 [33.02] 1.200 [30.48] 6-534998-3 6-535598-3 6-535585-3
28 1.400 [35.56] 1.300 [33.02] 6-534998-4 6-535598-4 6-535585-4
30 1.500 [38.10] 1.400 [35.56] 6-534998-5 6-535598-5 6-535585-5
32 1.600 [40.64] 1.500 [38.10] 6-534998-6 6-535598-6 6-535585-6
34 1.700 [43.18] 1.600 [40.64] 6-534998-7 6-535598-7 6-535585-7
36 1.800 [45.72] 1.700 [43.18] 6-534998-8 6-535598-8 6-535585-8
38 1.900 [48.26] 1.800 [45.72] 6-534998-9 6-535598-9 6-535585-9
40 2.000 [50.80] 1.900 [48.26] 7-534998-0 7-535598-0 7-535585-0
Notes: 1. TE recommends mating gold or duplex plated headers with duplex plated receptacle
assemblies.
2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to
the maximum point-of-contact dimension.

Note: All part numbers are RoHS compliant.


179
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Mod IV Receptacle Assemblies, Double-Row,


.100 x .100 [2.54 x 2.54] Centerline (Continued)
Keying Plug No. of Dimensions Contact Plating/Part Nos.
Pos. A B Plating A Plating B Plating C
42 2.100 [53.34] 2.000 [50.80] 7-534998-1 7-535598-4 7-535585-4
44 2.200 [55.88] 2.100 [53.34] 7-534998-2 7-535598-5 7-535585-5
46 2.300 [58.42] 2.200 [55.88] 7-534998-3 7-535598-6 7-535585-6
48 2.400 [60.96] 2.300 [58.42] 7-534998-4 7-535598-7 7-535585-7
50 2.500 [63.50] 2.400 [60.96] 7-534998-5 7-535598-1 7-535585-1
Part No. 86286-1 52 2.600 [66.04] 2.500 [63.50] 7-534998-6 7-535598-8 7-535585-8
(Plugs into receptacle contact) 54 2.700 [68.58] 2.600 [66.04] 7-534998-7 7-535598-9 7-535585-9
56 2.800 [71.12] 2.700 [68.58] 7-534998-8 8-535598-0 8-535585-0
58 2.900 [73.66] 2.800 [71.12] 7-534998-9 8-535598-1 8-535585-1
Material Natural color nylon
60 3.000 [76.20] 2.900 [73.66] 8-534998-0 7-535598-2 7-535585-2
62 3.100 [78.74] 3.000 [76.20] 8-534998-1 8-535598-2 8-535585-2
64 3.200 [81.28] 3.100 [78.74] 8-534998-2 8-535598-3 8-535585-3
66 3.300 [83.82] 3.200 [81.28] 8-534998-3 8-535598-4 8-535585-4
68 3.400 [86.36] 3.300 [83.82] 8-534998-4 8-535598-5 8-535585-5
70 3.500 [88.90] 3.400 [86.36] 8-534998-5 8-535598-6 8-535585-6
72 3.600 [91.44] 3.500 [88.90] 8-534998-6 8-535598-7 8-535585-7
74 3.700 [93.98] 3.600 [91.44] 8-534998-7 8-535598-8 8-535585-8
76 3.800 [96.52] 3.700 [93.98] 8-534998-8 8-535598-9 8-535585-9
78 3.900 [99.06] 3.800 [96.52] 8-534998-9 9-535598-0 9-535585-0
80 4.000 [101.60] 3.900 [99.06] 9-534998-0 7-535598-3 7-535585-3
Notes: 1. TE recommends mating gold or duplex plated headers with duplex plated receptacle assemblies.
Receptacle Assemblies

2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to
the maximum point-of-contact dimension.
Vertical Mount,

Note: All part numbers are RoHS compliant.


180
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Mod IV Receptacle Assemblies, Single-Row, Outrigger Design


.100 x .100 [2.54 x 2.54] Centerline, End To End Stackable
Dual Entry, End Stackable, .125.010
[3.170.25]
Low Profile, .100 x .100 Typ.
[2.54 x 2.54] Centerline,
.200 [5.08] Tine Spacing
.020
[0.51]
.245
(Standoffs)
[6.22]

A .148
Point of
[3.77]
Contact
Typ.
.107 .200.003
[2.72] [5.080.08]
(Localized Gold Typ.
Plate Area)

Material and Finish


Housing Glass-filled thermoplastic,
black, 94V-0 rated .140 .053
[3.56] .100
Plating A Duplex .000030 [0.00076] [2.54]
[1.34]
Typ.
gold on contact area, .000150-0.000300 Typ.
[0.00381-0.00762] matte tin on solder B
area all over .000050 [0.00127] nickel
.075 +.005
Plating B Duplex .000010 -.000

Receptacle Assemblies
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
[1.90 +0.13
-.000]

Vertical Mount,
matte tin on solder area all over .000050
[0.00127] nickel .200
[5.08]
Plating C .000150-.000300
[0.00381-0.00762] matte tin on solder .140
[3.56]
leads, all over .000050 [0.00127] nickel
.100
[2.54]
.035.003 Typ.
Dia.
[0.890.08]

No. of
Pos. A
Dimensions
Recommended PC Board Hole Layout

B Plating A
Contact Plating/Part Nos.
Plating B Plating C
5
3 .300 [7.62] .200 [5.08] 5-147720-2 5-147726-2 5-147727-2
4 .400 [10.16] .300 [7.62] 5-147720-3 5-147726-3 5-147727-3
5 .500 [12.70] .400 [10.16] 5-147720-4 5-147726-4 5-147727-4
6 .600 [15.24] .500 [12.70] 5-147720-5 5-147726-5 5-147727-5
7 .700 [17.78] .600 [15.24] 5-147720-6 5-147726-6 5-147727-6
8 .800 [20.32] .700 [17.78] 5-147720-7 5-147726-7 5-147727-7
9 .900 [22.86] .800 [20.32] 5-147720-8 5-147726-8 5-147727-8
10 1.000 [25.40] .900 [22.86] 5-147720-9 5-147726-9 5-147727-9
11 1.100 [27.94] 1.000 [25.40] 6-147720-0 6-147726-0 6-147727-0
12 1.200 [30.48] 1.100 [27.94] 6-147720-1 6-147726-1 6-147727-1
13 1.300 [33.02] 1.200 [30.48] 6-147720-2 6-147726-2 6-147727-2
14 1.400 [35.56] 1.300 [33.02] 6-147720-3 6-147726-3 6-147727-3
15 1.500 [38.10] 1.400 [35.56] 6-147720-4 6-147726-4 6-147727-4
16 1.600 [40.64] 1.500 [38.10] 6-147720-5 6-147726-5 6-147727-5
17 1.700 [43.18] 1.600 [40.64] 6-147720-6 6-147726-6 6-147727-6
18 1.800 [45.72] 1.700 [43.18] 6-147720-7 6-147726-7 6-147727-7
19 1.900 [48.26] 1.800 [45.72] 6-147720-8 6-147726-8 6-147727-8
20 2.000 [50.80] 1.900 [48.26] 7-147720-8 7-147726-8 7-147727-8
30 3.000 [76.20] 2.900 [73.66] 8-147720-8 8-147726-8 8-147727-8
40 4.000 [101.60] 3.900 [99.06] 8-147720-9 8-147726-9 8-147727-9
Notes: 1. TE recommends mating gold or duplex plated headers with duplex plated receptacle
assemblies.
2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to
Note: All part numbers are RoHS the maximum point-of-contact dimension and add .062 [1.57] for recommended board thickness if used in
compliant. bottom entry application.

181
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Mod IV Receptacle Assemblies, Double-Row, Outrigger Design,


.100 x .100 [2.54 x 2.54] Centerline, End to End Stackable
Dual Entry, End Stackable, .020
Low Profile, .100 x .100 [0.51]
(Standoffs)
[2.54 x 2.54] Centerline,
.300 [7.62] Tine Spacing

.245
[6.22]
Typ.

A
.148
.050 [3.77] Point of
[1.27] Typ. Contact
Max.
Typ. .107
[2.72]
Typ.
.100.003
Material and Finish [2.540.08]
(Localized Gold
Plate Area)
Housing Glass-filled thermoplastic, .300
.198
[7.62]
black, 94V-0 rated [5.03]
Typ.
Contacts Phosphor bronze,
plated as follows:
Plating A Duplex .000030 [0.00076] .125.010
[3.170.25]
gold on contact area, .000150-.000300 .100
[0.00381-0.00762] matte tin on solder [2.54]
Receptacle Assemblies

Typ.
area all over .000050 [0.00127] nickel B .100
[2.54]
Vertical Mount,

Plating B Duplex .000010 Typ.


[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762] .100 .100
[2.54] [2.54]
matte tin on solder area all over .000050 Typ. Typ.
[0.00127] nickel
Plating C .000150-.000300
[0.00381-0.00762] matte tin on solder
leads, all over .000050 [0.00127] nickel

5 Related Product Data


Mateable Headers
Refer to the Mating Post Selection .035.003 Dia.
[0.890.08] Typ. [
.075
+.005
-0.00 Dia.
.060+0.13
1.90
-0.00 ]
Typ.
.100
[2.54]
Typ.
Guide page 90
Performance Characteristics Recommended PC Board Hole Layout
page 174 Dimensions Contact Plating/Part Nos.
No. of
Pos. A B Plating A Plating B Plating C
2 .100 [2.54] 6-534267-3 5-147099-1 8-147100-9
Technical Documents page 276 4 .200 [5.08] .100 [2.54] 6-534267-7 5-147099-2 9-147100-0
Product Specification 6 .300 [7.62] .200 [5.08] 6-534267-4 5-147099-3 5-147100-1
108-25022 8 .400 [10.16] .300 [7.62] 5-534267-5 5-147099-4 5-147100-2
Application Specification 14 .700 [17.78] .600 [15.24] 5-534267-1 5-147099-7 5-147100-5
114-25018 18 .900 [22.86] .800 [20.32] 6-534267-0 5-147099-9 5-147100-7
Additional receptacle assembly 20 1.000 [25.40] .900 [22.86] 5-534267-2 6-147099-0 5-147100-8
sizes are available; minimum 24 1.200 [30.48] 1.100 [27.94] 5-534267-9 6-147099-2 6-147100-0
order quantities may apply. 30 1.500 [38.10] 1.400 [35.56] 6-534267-2 6-147099-5 6-147100-3
Consult TE.
36 1.800 [45.72] 1.700 [43.18] 6-534267-5 6-147099-8 6-147100-6
40 2.000 [50.80] 1.900 [48.26] 5-534267-7 7-147099-0 6-147100-8
48 2.400 [60.96] 2.300 [58.42] 6-534267-1 7-147099-4 7-147100-2
Keying Plug 50 2.500 [63.50] 2.400 [60.96] 6-534267-8 7-147099-5 7-147100-3
60 3.000 [76.20] 2.900 [73.66] 5-534267-8 8-147099-0 7-147100-8
76 3.800 [96.52] 3.700 [93.98] 6-534267-6 8-147099-8 8-147100-6
80 4.000 [101.60] 3.900 [99.06] 5-534267-4 9-147099-0 8-147100-8
Notes: 1. TE recommends mating gold or duplex plated headers with duplex plated receptacle assemblies.
Part No. 86286-1
2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to the
(Plugs into receptacle contact)
maximum point-of-contact dimension and .062 for recommended board thickness if used in bottom entry
application.
Material Natural color nylon
Note: All part numbers are RoHS compliant.
182
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Mod. IV Receptacle Assemblies, Double-Row,


.100 x .100 [2.54 x 2.54] Centerline
.020
Closed Dual Entry, Side and [0.51]
End Stackable Low Profile, Typ.
(Standoffs)
.100 x .100 [2.54 x 2.54]
Centerline, .150 [3.81] Tine
Spacing

.245
[6.22]
Typ.
A
.050
[1.27]
Max.
Typ.
.148 .150
Point of [3.81]
[3.77]
Material and Finish .100.003 Typ.
Contact Typ.
[2.540.08]
Housing Glass-filled thermoplastic,
.198
black, 94V-0 rated [5.03]
Contacts Phosphor bronze,
plated as follows: .107
[2.72]
Plating A Duplex .000030 [0.00076] Typ.
.130.010
gold on contact area, .000150-.000300 [3.300.25]
.100 (Localized Gold Typ.
[0.00381-0.00762] matte tin on solder [2.54] Plate Area)
area all over .000050 [0.00127] nickel

Receptacle Assemblies
B
Plating B Duplex .000010 B

Vertical Mount,
.100*
[0.000254] gold on contact area, .075+.005 Dia. [2.54] .100
-.000 .100
.000150-.000300 [0.00381-0.00762] [
1.90+0.13
.060 -0.00 ] Typ. Typ. [2.54] [2.54]
matte tin on solder area all over .000050 Typ. Typ.
[0.00127] nickel
Plating C .000150-.000300
[0.00381-0.00762] matte tin on solder
leads, all over .000050 [0.00127] nickel .150
.035.003 [3.81]
Recommended PC Board Hole Layout Dia. Typ.
[0.890.08] Typ.
for Bottom Entry or Pass Through Applications

5
Related Product Data *.003 [0.08] tolerances not to accumulate Recommended PC Board Hole Layout
Mateable Headers within one connector pattern. for Top Entry
Refer to the Mating Post Selection
Guide page 90 No. of Dimensions Contact Plating/Part Nos.
Performance Characteristics Pos. A B Plating A Plating B Plating C
page 174 2 .100 [2.54] 5-535542-1 5-147095-1 5-147096-1
4 .200 [5.08] .100 [2.54] 5-535542-2 5-147095-2 5-147096-2
6 .300 [7.62] .200 [5.08] 5-535542-3 5-147095-3 5-147096-3
Technical Documents page 276 8 .400 [10.16] .300 [7.62] 5-535542-4 5-147095-4 5-147096-4
Product Specification 10 .500 [12.70] .400 [10.16] 5-535542-5 5-147095-5 5-147096-5
108-25022 12 .600 [15.24] .500 [12.70] 5-535542-6 5-147095-6 5-147096-6
Application Specification 14 .700 [17.78] .600 [15.24] 5-535542-7 5-147095-7 5-147096-7
114-25018 16 .800 [20.32] .700 [17.78] 5-535542-8 5-147095-8 5-147096-8
18 .900 [22.86] .800 [20.32] 5-535542-9 5-147095-9 5-147096-9
20 1.000 [25.40] .900 [22.86] 6-535542-0 6-147095-0 6-147096-0
22 1.100 [27.94] 1.000 [25.40] 6-535542-1 6-147095-1 6-147096-1
24 1.200 [30.48] 1.100 [27.94] 6-535542-2 6-147095-2 6-147096-2
26 1.300 [33.02] 1.200 [30.48] 6-535542-3 6-147095-3 6-147096-3
28 1.400 [35.56] 1.300 [33.02] 6-535542-4 6-147095-4 6-147096-4
30 1.500 [38.10] 1.400 [35.56] 6-535542-5 6-147095-5 6-147096-5
32 1.600 [40.64] 1.500 [38.10] 6-535542-6 6-147095-6 6-147096-6
34 1.700 [43.18] 1.600 [40.64] 6-535542-7 6-147095-7 6-147096-7
36 1.800 [45.72] 1.700 [43.18] 6-535542-8 6-147095-8 6-147096-8
38 1.900 [48.26] 1.800 [45.72] 6-535542-9 6-147095-9 6-147096-9
40 2.000 [50.80] 1.900 [48.26] 7-535542-0 7-147095-0 7-147096-0
Notes: 1. TE recommends mating gold or duplex plated headers with duplex plated receptacle assemblies.
2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to
Note: All part numbers are RoHS the maximum point-of-contact dimension, and .062 [1.57] for recommended board thickness if used in bot-
compliant. tom entry application.
183
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Mod. IV Receptacle Assemblies, Double-Row,


.100 x .100 [2.54 x 2.54] Centerline (Continued)

No. of Dimensions Contact Plating/Part Nos.


Pos. A B Plating A Plating B Plating C
42 2.100 [53.34] 2.000 [50.80] 7-535542-1 7-147095-1 7-147096-1
44 2.200 [55.88] 2.100 [53.34] 7-535542-2 7-147095-2 7-147096-2
46 2.300 [58.42] 2.200 [55.88] 7-535542-3 7-147095-3 7-147096-3
48 2.400 [60.96] 2.300 [58.42] 7-535542-4 7-147095-4 7-147096-4
50 2.500 [63.50] 2.400 [60.96] 7-535542-5 7-147095-5 7-147096-5
52 2.600 [66.04] 2.500 [63.50] 7-535542-6 7-147095-6 7-147096-6
54 2.700 [68.58] 2.600 [66.04] 7-535542-7 7-147095-7 7-147096-7
56 2.800 [71.12] 2.700 [68.58] 7-535542-8 7-147095-8 7-147096-8
58 2.900 [73.66] 2.800 [71.12] 7-535542-9 7-147095-9 7-147096-9
60 3.000 [76.20] 2.900 [73.66] 8-535542-0 8-147095-0 8-147096-0
62 3.100 [78.74] 3.000 [76.20] 8-535542-1 8-147095-1 8-147096-1
64 3.200 [81.28] 3.100 [78.74] 8-535542-2 8-147095-2 8-147096-2
66 3.300 [83.82] 3.200 [81.28] 8-535542-3 8-147095-3 8-147096-3
68 3.400 [86.36] 3.300 [83.82] 8-535542-4 8-147095-4 8-147096-4
70 3.500 [88.90] 3.400 [86.36] 8-535542-5 8-147095-5 8-147096-5
72 3.600 [91.44] 3.500 [88.90] 8-535542-6 8-147095-6 8-147096-6
74 3.700 [93.98] 3.600 [91.44] 8-535542-7 8-147095-7 8-147096-7
76 3.800 [96.52] 3.700 [93.98] 8-535542-8 8-147095-8 8-147096-8
78 3.900 [99.06] 3.800 [96.52] 8-535542-9 8-147095-9 8-147096-9
80 4.000 [101.60] 3.900 [99.06] 9-535542-0 9-147095-0 9-147096-0
Receptacle Assemblies
Vertical Mount,

Note: All part numbers are RoHS compliant.


184
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Mod IV Surface Mount Vertical Receptacle Assemblies,


.100 x .100 [2.54 x 2.54] Centerline
Product Facts
Surface Mount Leads
Contact Material:
phosphor bronze
High temperature, black
thermoplastic housings,
94V-0 rated, capable of
withstanding IR or vapor-
phase reflow
Gold/tin duplex plating
for reliable mating
interconnection and solder
interface
Metallic hold downs provide
retention in the PC board
prior to and during the
reflow process and strain
relief after soldering
Hold downs provide for
proper lead-to-pad
registration

Surface Mount Receptacle


Closed-entry receptacle The AMPMODU 0.025 [0.64] AMPMODU surface mount downs are soldered during
housings provide lead-in

Assemblies
square interconnection vertical receptacle the reflow process and
ramp for positive mating system is an industry assemblies continue to serve as a strain relief for
Receptacle contacts employ standard that has provided provide the proven features the solder joints during
dual cantilever beams for level III and IV thru-hole and benefits of their mating/unmating.
reliable connections interconnections to almost thru-hole counterparts in the The design of the hold
Recognized under the every industry and AMPMODU product family. downs results in an
Component Program marketplace for years. Closed-entry style housing excellent ratio of
of Underwriters As technology advances, design provides a lead-in insertion/extraction forces

Laboratories Inc.
File No. E28476
Certified by
R
so has the AMPMODU
product line.
Surface mount vertical
receptacle assemblies are
ramp for positive mating of
contacts, virtually eliminating
the possibility of stubbing.
The dual-beam receptacle
(into the PC board); 20 lb.
[89 N] maximum insertion
force per pair and 10 lb.
[44.5 N] minimum extraction
5
Canadian Standards contact design, coupled with
Association, available to meet your level force per pair (unsoldered).
R

II packaging needs as gold plating in the contact No tools are required for
File No. LR 7189 area, provides a reliable
process technologies insertion.
evolve from wave soldering interface. Tin plating on the
to surface mount reflow solder tails also enhances
(infrared and vapor-phase) solderability.
processes. AMPMODU The incorporation of
surface mount receptacle compliant metallic hold
assemblies are offered in downs on receptacle
vertical dual entry assemblies offers multiple
configurations. These benefits. The hold downs
receptacles are available in provide for proper lead-to-
single-row and double-row pad registration and provide
configurations with a retention to the PC board
contact centerline spacing prior to and during
of .100 x .100 [2.54 x 2.54]. processing. Used with a
plated thru-hole, the hold

185
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Mod IV Surface Mount Vertical Receptacle Assemblies,


.100 x .100 [2.54 x 2.54] Centerline (Continued)
Performance Specifications Voltage Rating: 250 VAC
Current Rating: 3.0 amperes (max.) for single contact;
2.0 amperes (max.) per contact when connector is fully energized
Operating Temperature Range (Receptacle Assemblies): 65C to +125C
Operating Temperature Range (Headers): -65C to +105C
Dielectric Withstanding Voltage: 750 VAC
Termination Resistance: 12 milliohms (max.)
Insulation Resistance: 5000 megohms (min.)
Mating Force (Receptacle Assemblies): 9.0 oz. [2.50N] (max.) per contact
Unmating Force (Receptacle Assemblies): 1.5 oz. [0.42N] (min.) per contact
Durability: Tested to 200 cycles (min.) for .000030 [0.00076] gold plated contacts
Surface Mount Receptacle
Assemblies

186
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Mod IV Receptacle Assemblies, Single-Row, Surface Mount,


.100 [2.54] Centerline with Compliant Pin Hold Downs
Surface Mount, Single-Row, .038 [ ]
.030 0.76
.025 0.64
.020 Standoffs
[0.51] Typ.
Dual Entry with Compliant [0.97] Typ.
Pin Holddowns
.265
[6.73]
Typ.

D .107 (Localized Gold


[2.72] Plate Area)
C

Material and Finish .140 .208


Housing Glass-filled thermoplastic, [3.56] [5.28] Max.
(Depressed)
black, 94V-0 rated
Contacts Phosphor bronze, plated .100
as follows: [2.54] Typ. .148 Point of
A [3.77] Contact
Plating A Duplex .000030
D
[0.00076] gold on contact area, .100
.000150-.000300 [0.00381-0.00762] B [2.54]
matte tin on solder area all over .000050 P.C. Board .069
[0.00127] nickel [1.75]
Plating B Duplex .000010
.228
[0.000254] gold on contact area, [5.78]
.000150-.000300 [0.00381-0.00762] .075
matte tin on solder area all over .000050 [1.91]

Surface Mount Receptacle


[0.00127] nickel .090
[2.28] Typ.
Plating C .000150-.000300 .042.003 Dia. .110
[1.070.08]
[0.00381-0.00762] matte tin on solder [2.79]

Assemblies
.042.003 Dia.
leads, all over .000050 [0.00127] nickel .040.003 C .060 [1.070.08]
[1.020.08]
[1.52] Min. .042.003 Dia.
Dia. Typ.
Related Product Data (For bottom Recommended PC Board Pad Pattern [1.070.08]
entry or pass
Mateable Headers thru applica-
(.008 [0.20] thick stencil)
Refer to Mating Post Selection Guide tions)
page 90
Performance Specifications
page 186

No. of
Pos. A B
Dimensions
C D
Packaged in Tubes
Contact Plating/ Part Nos.
Plating A Plating B Plating C
Packaged in Tape & Reel
Contact Plating/ Part Nos.
Plating A Plating B Plating C
5
3 .500 [12.70] .200 [5.08] See note 3 .400 [10.16] 5-147744-1 5-147743-1 5-147742-1 5-147724-1 5-147730-1 5-147731-1
4 .600 [15.24] .300 [7.62] See note 3 .500 [12.70] 5-147744-2 5-147743-2 5-147742-2 5-147724-2 5-147730-2 5-147731-2
5 .700 [17.78] .400 [10.16] See note 3 .600 [15.24] 5-147744-3 5-147743-3 5-147742-3 5-147724-3 5-147730-3 5-147731-3
6 .800 [20.32] .500 [12.70] See note 3 .700 [17.78] 5-147744-4 5-147743-4 5-147742-4 5-147724-4 5-147730-4 5-147731-4
7 .900 [22.86] .600 [15.24] See note 3 .800 [20.32] 5-147744-5 5-147743-5 5-147742-5 5-147724-5 5-147730-5 5-147731-5
8 1.000 [25.40] .700 [17.78] See note 3 .900 [22.86] 5-147744-6 5-147743-6 5-147742-6 5-147724-6 5-147730-6 5-147731-6
9 1.100 [27.94] .800 [20.32] See note 3 1.000 [25.40] 5-147744-7 5-147743-7 5-147742-7 5-147724-7 5-147730-7 5-147731-7
10 1.200 [30.48] .900 [22.86] See note 3 1.100 [27.94] 5-147744-8 5-147743-8 5-147742-8 5-147724-8 5-147730-8 5-147731-8
11 1.300 [33.02] 1.000 [25.40] See note 3 1.200 [30.48] 5-147744-9 5-147743-9 5-147742-9 5-147724-9 5-147730-9 5-147731-9
12 1.400 [35.56] 1.100 [27.94] See note 3 1.300 [33.02] 6-147744-0 6-147743-0 6-147742-0 6-147724-0 6-147730-0 6-147731-0
13 1.500 [38.10] 1.200 [30.48] See note 3 1.400 [35.56] 6-147744-1 6-147743-1 6-147742-1 6-147724-1 6-147730-1 6-147731-1
14 1.600 [40.64] 1.300 [33.02] See note 3 1.500 [38.10] 6-147744-2 6-147743-2 6-147742-2 6-147724-2 6-147730-2 6-147731-2
15 1.700 [43.18] 1.400 [35.56] See note 3 1.600 [40.64] 6-147744-3 6-147743-3 6-147742-3 6-147724-3 6-147730-3 6-147731-3
16 1.800 [45.72] 1.500 [38.10] See note 3 1.700 [43.18] 6-147744-4 6-147743-4 6-147742-4 6-147724-4 6-147730-4 6-147731-4
17 1.900 [48.26] 1.600 [40.64] See note 3 1.800 [45.72] 6-147744-5 6-147743-5 6-147742-5 6-147724-5 6-147730-5 6-147731-5
18 2.000 [50.80] 1.700 [43.18] See note 3 1.900 [48.26] 6-147744-6 6-147743-6 6-147742-6 6-147724-6 6-147730-6 6-147731-6
19 2.100 [53.34] 1.800 [45.72] See note 3 2.000 [50.80] 6-147744-7 6-147743-7 6-147742-7 6-147724-7 6-147730-7 6-147731-7
20 2.200 [55.88] 1.900 [48.26] See note 3 2.100 [53.34] 6-147744-8 6-147743-8 6-147742-8 6-147724-8 6-147730-8 6-147731-8
30 3.200 [81.28] 2.900 [73.66] See note 3 3.100 [78.74] 7-147744-8 7-147743-8 7-147742-8 7-147724-8 7-147730-8 7-147731-8
40 4.300 [109.22] 4.100 [104.14] 2.100 [53.34] 4.200 [106.68] 8-147744-8 8-147743-8 8-147742-8 8-147724-8 8-147730-8 8-147731-8
Notes: 1. TE recommends mating gold or duplex plated headers with duplex plated receptacle assemblies.
2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to the maximum point-of-contact dimension, and
.062 [1.57] for recommended board thickness if used in bottom entry application
3. No center hold down.

Note: All part numbers are RoHS compliant.


187
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Mod IV Receptacle Assemblies, Single-Row, Surface Mount, .100 [2.54] x


.100 [2.54] Centerline End To End Stackable without Compliant Pin Holddowns
.020
Surface Mount,Single-Row, [0.51] Standoff
Typ.
Dual Entry, End to End
Stackable .265
[6.73]

.107
A [2.72] .208
Material and Finish .100 Typ. [5.28] Max.
Housing Glass-filled thermoplastic, [2.54] Typ. (Localized Gold
black, 94V-0 rated Plate Area)

Contacts Phosphor bronze, plated


as follows: .140
[3.56]
Plating A Duplex .000030
[0.00076] gold on contact area,
.000150-.000300 [0.00381-0.00762] .148 Point of
matte tin on solder area all over .000050 [3.77] Contact
[0.00127] nickel
Plating B Duplex .000010
[0.000254] gold on contact area, B .040.003 Dia. Typ.
.000150-.000300 [0.00381-0.00762] [1.020.08]
Surface Mount Receptacle

matte tin on solder area all over .000050 (For bottom entry or pass
.100 through applications)
[0.00127] nickel [2.54]
Assemblies

Plating C .000150-.000300
[0.00381-0.00762] matte tin on solder
leads, all over .000050 [0.00127] nickel .228
[5.78]
Related Product Data
Mateable Headers .060
Refer to Mating Post Selection Guide [1.52] Min. .090
page 90 [2.28]
Performance Specifications Recommended PC Board Pad Pattern

5 page 186

No. of
Pos. A
Dimensions
B
(.008 [0.20] thick stencil)

Packaged in Tubes
Contact Plating/ Part Nos.
Packaged in Tape & Reel
Contact Plating/ Part Nos.
Plating A Plating B Plating C Plating A Plating B Plating C
3 .300 [7.62] .200 [5.08] 5-147738-2 5-147737-2 5-147736-2 5-147723-2 5-147728-2 5-147729-2
4 .400 [10.16] .300 [7.62] 5-147738-3 5-147737-3 5-147736-3 5-147723-3 5-147728-3 5-147729-3
5 .500 [12.70] .400 [10.16] 5-147738-4 5-147737-4 5-147736-4 5-147723-4 5-147728-4 5-147729-4
6 .600 [15.24] .500 [12.70] 5-147738-5 5-147737-5 5-147736-5 5-147723-5 5-147728-5 5-147729-5
7 .700 [17.78] .600 [15.24] 5-147738-6 5-147737-6 5-147736-6 5-147723-6 5-147728-6 5-147729-6
8 .800 [20.32] .700 [17.78] 5-147738-7 5-147737-7 5-147736-7 5-147723-7 5-147728-7 5-147729-7
9 .900 [22.86]] .800 [20.32] 5-147738-8 5-147737-8 5-147736-8 5-147723-8 5-147728-8 5-147729-8
10 1.000 [25.40] .900 [22.86] 5-147738-9 5-147737-9 5-147736-9 5-147723-9 5-147728-9 5-147729-9
11 1.100 [27.94] 1.000 [25.40] 6-147738-0 6-147737-0 6-147736-0 6-147723-0 6-147728-0 6-147729-0
12 1.200 [30.48] 1.100 [27.94] 6-147738-1 6-147737-1 6-147736-1 6-147723-1 6-147728-1 6-147729-1
13 1.300 [33.02] 1.200 [30.48] 6-147738-2 6-147737-2 6-147736-2 6-147723-2 6-147728-2 6-147729-2
14 1.400 [35.56] 1.300 [33.02] 6-147738-3 6-147737-3 6-147736-3 6-147723-3 6-147728-3 6-147729-3
15 1.500 [38.10] 1.400 [35.56] 6-147738-4 6-147737-4 6-147736-4 6-147723-4 6-147728-4 6-147729-4
16 1.600 [40.64] 1.500 [38.10] 6-147738-5 6-147737-5 6-147736-5 6-147723-5 6-147728-5 6-147729-5
17 1.700 [43.18] 1.600 [40.64] 6-147738-6 6-147737-6 6-147736-6 6-147723-6 6-147728-6 6-147729-6
18 1.800 [45.72] 1.700 [43.18] 6-147738-7 6-147737-7 6-147736-7 6-147723-7 6-147728-7 6-147729-7
19 1.900 [48.26] 1.800 [45.72] 6-147738-8 6-147737-8 6-147736-8 6-147723-8 6-147728-8 6-147729-8
20 2.000 [50.80] 1.900 [48.26] 6-147738-9 6-147737-9 6-147736-9 6-147723-9 6-147728-9 6-147729-9
30 3.000 [76.20] 2.900 [73.66] 7-147738-9 7-147737-9 7-147736-9 7-147723-9 7-147728-9 7-147729-9
40 4.000 [101.60] 3.900 [99.06] 8-147738-9 8-147737-9 8-147736-9 8-147723-9 8-147728-9 8-147729-9
Notes: 1. TE recommends mating gold or duplex plated headers with duplex plated receptacle assemblies.
2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to
the maximum point-of-contact dimension, and .062 [1.57] for recommended board thickness if used in bottom entry application.
Note: All part numbers are RoHS compliant.
188
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Mod IV Surface Mount Receptacle Assemblies, Double-Row,


.100 x .100 [2.54 x 2.54] Centers
Surface Mount,Double Row,
Dual Entry with Holddowns A
.100
.050 [2.54]
[1.27] Typ.
Typ.

.198
[5.03] .107
.148 Point of [2.72]
.265
[3.76] Contact Typ.
[6.73]
Typ.
Material and Finish Typ. (Localized Gold
Plate Area)
Housing Glass-filled thermoplastic,
black, 94V-0 rated
.083
Contacts Phosphor bronze, plated [2.12]
as follows: Typ.
Plating A Duplex .000030 [0.00076] .020
gold on contact area, .000150-.000300 [0.51] .027.002
[0.00381-0.00762] matte tin on solder Typ. [0.690.05] Typ. .266
area all over .000050 [0.00127] nickel [6.75]

Plating B Duplex .000010 .110


[0.000254] gold on contact area, [2.79]
.000150-.000300 [0.00381-0.00762] Typ. .238

Surface Mount Receptacle


matte tin on solder area all over .000050 B [6.05]
[0.00127] nickel Typ.
.040.003
.100

Assemblies
Plating C .000150-.000300 [1.020.08] .100
[2.54] Typ.
[0.00381-0.00762] matte tin on solder [2.54]
Typ.
leads, all over .000050 [0.00127] nickel
.004
[0.10]
Related Product Data Typ.
.075
Mateable Headers .090 [1.91]
Refer to Mating Post Selection Guide [2.29] Typ.
page 90 Typ.
.040
Performance Specifications
page 186
.040.003
[1.020.08]
D
[1.02]
Typ.
(For bottom entry or
pass thru applications) .060
[1.52]
5
Typ.
Technical Documents page 276 C

Product Specification Recommended PC Board Layout


108-25022 (.008 [0.20] thick stencil)
Application Specification
114-25018
Additional receptacle assembly
sizes are available; minimum
order quantities may apply.
Consult TE.

Keying Plug

Part No. 86286-1


(Plugs into receptacle contact)
Material Natural color nylon
Note: All part numbers are RoHS compliant.
189
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Mod IV Surface Mount Receptacle Assemblies, Double-Row,


.100 x .100 [2.54 x 2.54] Centers (Continued)

Packaged in Tubes Packaged in Tape and Reel


Dimensions
No. of Contact Plating/Part Nos. Contact Plating/Part Nos.
A B C D
Pos. Plating A Plating B Plating C Plating A Plating B Plating C
10 .700 [17.78] .400 [10.16] .600 [15.24] See Note 1 5-147102-5 5-147101-5 5-147103-5 5-147747-5 5-147746-5 5-147745-5
14 .900 [22.86] .600 [15.24] .800 [20.32] See Note 1 5-147102-7 5-147101-7 5-147103-7 5-147747-7 5-147746-7 5-147745-7
20 1.200 [30.48] .900 [22.86] 1.100 [27.94] See Note 1 6-147102-0 6-147101-0 6-147103-0 6-147747-0 6-147746-0 6-147745-0
22 1.300 [33.02] 1.000 [25.40] 1.200 [30.48] See Note 1 6-147102-1 6-147101-1 6-147103-1 6-147747-1 6-147746-1 6-147745-1
26 1.500 [38.10] 1.200 [30.48] 1.400 [35.56] See Note 1 6-147102-3 6-147101-3 6-147103-3 6-147747-3 6-147746-3 6-147745-3
30 1.700 [43.18] 1.400 [35.56] 1.600 [40.64] See Note 1 6-147102-5 6-147101-5 6-147103-5 6-147747-5 6-147746-5 6-147745-5
34 1.900 [48.26] 1.600 [40.64] 1.800 [45.72] See Note 1 6-147102-7 6-147101-7 6-147103-7 6-147747-7 6-147746-7 6-147745-7
36 2.000 [50.08] 1.700 [43.18] 1.900 [48.26] See Note 1 6-147102-8 6-147101-8 6-147103-8 6-147747-8 6-147746-8 6-147745-8
40 2.200 [55.88] 1.900 [48.26] 2.100 [53.34] See Note 1 7-147102-0 7-147101-0 7-147103-0 7-147747-0 7-147746-0 7-147745-0
46 2.500 [63.50] 2.200 [55.88] 2.400 [60.96] See Note 1 7-147102-3 7-147101-3 7-147103-3 7-147747-3 7-147746-3 7-147745-3
50 2.700 [68.58] 2.400 [60.96] 2.600 [66.04] See Note 1 7-147102-5 7-147101-5 7-147103-5 7-147747-5 7-147746-5 7-147745-5
62 3.300 [83.82] 3.000 [76.20] 3.200 [81.28] See Note 1 8-147102-1 8-147101-1 8-147103-1 8-147747-1 8-147746-1 8-147745-1
64 3.400 [86.36] 3.100 [78.74] 3.300 [83.82] See Note 1 8-147102-2 8-147101-2 8-147103-2 8-147747-2 8-147746-2 8-147745-2
66 3.500 [88.90] 3.200 [81.28] 3.400 [86.36] See Note 1 8-147102-3 8-147101-3 8-147103-3 8-147747-3 8-147746-3 8-147745-3
70 3.700 [95.98] 3.400 [86.36] 3.600 [91.44] See Note 1 8-147102-5 8-147101-5 8-147103-5 8-147747-5 8-147746-5 8-147745-5
80 4.300 [109.22] 3.900 [99.06] 4.200 [106.68] 2.100 [53.34] 9-147102-0 9-147101-0 9-147103-0 9-147747-0 9-147746-0 9-147745-0

Notes: 1. No center holddown.


2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to the maximum point-of-contact dimension and
.062 [1.57] for recommended board thickness in bottom entry applications.
Surface Mount Receptacle
Assemblies

Note: All part numbers are RoHS compliant.


190
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Mod IV Surface Mount Receptacle Assemblies, Double-Row,


.100 x .100 [2.54 x 2.54] Centerline
Surface Mount,Double Row, A
Dual Entry .100
End to End Stackable [2.54] Typ.
.100
[2.54] Typ.

.198.002
[5.030.05]
.050
[1.27]
Max.

.148 Point of
.265 .107
[3.76] Contact
[6.73]
Material and Finish Typ.
[2.72]
(Localized Gold
Housing Glass-filled thermoplastic, Plate Area)
black, 94V-0 rated
Contacts Phosphor bronze, plated
as follows:
Plating A Duplex .000030 [0.00076] .020 .027.002 Typ. .266
gold on contact area, .000150-.000300 [0.51] [0.690.05] [6.75]
Typ.
[0.00381-0.00762] matte tin on solder
area all over .000050 [0.00127] nickel

Surface Mount Receptacle


Plating B Duplex .000010
.238
[0.000254] gold on contact area, B [6.05]
.000150-.000300 [0.00381-0.00762] .100 Typ.

Assemblies
matte tin on solder area all over .000050 [2.54]
Typ.
[0.00127] nickel .100
Plating C .000150-.000300 [2.54]
[0.00381-0.00762] tin-lead over Typ.
.004
.000050 [0.00127] nickel [0.10]
Typ.

Related Product Data .090


[2.29] .060
[1.52] Typ.

5
Mateable Headers .040
Refer to Mating Post Selection Guide [1.02] Typ.
page 90
Recommended PC Board Pad Layout
Performance Specifications (.008 [0.20] thick stencil)
page 186 (for Bottom Entry and Pass Through applications)

Technical Documents page 276


Product Specification
108-25022
Application Specification
114-25018
Additional receptacle assembly
sizes are available; minimum
order quantities may apply.
Consult TE.

Keying Plug

Part No. 86286-1


(Plugs into receptacle contact)

Material Natural color nylon

Note: All part numbers are RoHS compliant.


191
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Mod IV Surface Mount Receptacle Assemblies, Double-Row,


.100 x .100 [2.54 x 2.54] Centerline (Continued)

Packaged in Tubes Packaged in Tape & Reel


No. of Dimensions
Contact Plating/ Part Nos. Contact Plating/ Part Nos.
Pos. A B
Plating A Plating B Plating C Plating A Plating B Plating C
10 .500 [12.70] .400 [10.16] 5-147741-5 5-147740-5 5-147739-5 5-147105-5 5-147104-5 5-147106-5
14 .700 [17.78] .600 [15.24] 5-147741-7 5-147740-7 5-147739-7 5-147105-7 5-147104-7 5-147106-7
20 1.000 [25.40] .900 [22.86] 6-147741-0 6-147740-0 6-147739-0 6-147105-0 6-147104-0 6-147106-0
22 1.100 [27.94] 1.000 [25.40] 6-147741-1 6-147740-1 6-147739-1 6-147105-1 6-147104-1 6-147106-1
26 1.300 [33.02] 1.200 [30.48] 6-147741-3 6-147740-3 6-147739-3 6-147105-3 6-147104-3 6-147106-3
30 1.500 [38.10] 1.400 [35.56] 6-147741-5 6-147740-5 6-147739-5 6-147105-5 6-147104-5 6-147106-5
34 1.700 [43.18] 1.600 [40.64] 6-147741-7 6-147740-7 6-147739-7 6-147105-7 6-147104-7 6-147106-7
36 1.800 [45.72] 1.700 [43.18] 6-147741-8 6-147740-8 6-147739-8 6-147105-8 6-147104-8 6-147106-8
40 2.000 [50.80] 1.900 [48.26] 7-147741-0 7-147740-0 7-147739-0 7-147105-0 7-147104-0 7-147106-0
46 2.300 [58.42] 2.200 [55.88] 7-147741-3 7-147740-3 7-147739-3 7-147105-3 7-147104-3 7-147106-3
50 2.500 [63.50] 2.400 [60.96] 7-147741-5 7-147740-5 7-147739-5 7-147105-5 7-147104-5 7-147106-5
62 3.100 [78.74] 3.000 [76.20] 8-147741-1 8-147740-1 8-147739-1 8-147105-1 8-147104-1 8-147106-1
64 3.200 [81.28] 3.100 [78.74] 8-147741-2 8-147740-2 8-147739-2 8-147105-2 8-147104-2 8-147106-2
66 3.300 [83.82] 3.200 [81.28] 8-147741-3 8-147740-3 8-147739-3 8-147105-3 8-147104-3 8-147106-3
70 3.500 [88.90] 3.400 [86.36] 8-147741-5 8-147740-5 8-147739-5 8-147105-5 8-147104-5 8-147106-5
80 4.000 [101.60] 3.900 [99.06] 9-147741-0 9-147740-0 9-147739-0 9-147105-0 9-147104-0 9-147106-0
Notes: 1. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to the maximum point-of-contact dimension and
.062 [1.57] for recommended board thickness in bottom entry applications.
Surface Mount Receptacle
Assemblies

Note: All part numbers are RoHS compliant.


192
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Two-Piece Printed Circuit Board Connectors

Product Facts
Two-Piece reliability
Two- and three-row systems
available
Short signal path for VLSI
applications
Receptacles employ dual
cantilever beams and built-
in anti-overstress to provide
reliable connections
Built-in guides provide
alignment before contact
engagement
Closed entry receptacle
housings provide lead-in
ramp for positive mating of
contacts
Shrouded headers provide
full pin protection
Polarized headers
Vertical headers available
with ACTION PIN posts or

Printed Circuit Board


.025 [0.64] square solder

Connectors
posts
Repairable ACTION PIN
posts
Simple seating tooling for
headers with ACTION PIN
posts
ACTION PIN Posts Solder Posts
Recognized under the
Component Program
of Underwriters
Laboratories Inc.,
File No. E28476
R
5
Certified by Canadian
Standards Receptacle Contact
Association, R
(Double Beam with Anti-Overstress)
File No. LR 7189 Board Retention Feature Available

3-Row Closed Entry


3-Row Header
Receptacle 5-534974-8
5-103264-3

5-532956-3 Horizontal
Receptacle

5-534972-2 Vertical
Receptacle

5-102690-3
Vertical Header Double-Row
with ACTION PIN Make First/Break
Posts Last Header
(Part Nos. available
upon request)
6-102589-2 3/4 Shroud,
Right Angle Header
For drawings, technical data or samples,
5-532956-3 Horizontal contact your TE sales engineer or call
Note: All part numbers are RoHS Receptacle the TE Product Information Center:
compliant. 1-800-522-6752
193
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Two-Piece Printed Circuit Board Connectors (Continued)


AMPMODU Two-Piece The AMPMODU three-row A board retention feature
Printed Circuit Board connector system is is offered in the two-row
connectors are designed produced in 30 through 300 horizontal receptacles,
to reliably and economically positions (straight post two-row right angle headers
meet the packaging and headers and mating and two- and three-row
interconnection requirements horizontal receptacles). vertical headers. Built-in
of todays sophisticated Both two- and three-row guides assure accurate
electronics. vertical headers are header and receptacle
The double row system is available with press-fit alignment before contact
produced in 10 thru 200 ACTION PIN posts or engagement.
positions in the vertical standard .025 [0.64] square Closed entry receptacle
headers and horizontal solder posts. There is a housings provide a lead-in
receptacles, and 10 thru simple seating tool for ramp for positive mating of
160 positions in the right headers with ACTION PIN contacts.
angle headers and vertical posts.
receptacles.

Performance Specifications Temperature Rating


Current Rating Headers and Receptacles
3 amperes max. for single contact; 65C to +125C (black thermoplastic
2 amperes max. per contact for fully housings, 94V-0 rated)
energized connector Durability (Tested to) 200 cycles
Voltage Rating 250 VAC for .000030 [0.00076] gold plating;
Printed Circuit Board

75 cycles for .000015 [0.00038] gold


Dielectric Rating 750 VAC rms
plating
between contacts for one minute
Connectors

Mating Force 8 oz. [2.22N]


Termination Resistance
maximum per contact
12 milliohms max. at 100 milliamperes
test current, and 50 millivolts open cir- Unmating Force .75 oz. [0.2N]
cuit voltage minimum per contact during third
mating cycle
Insulation Resistance 1000
megohms after temperature/humidity
cycling

194
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Receptacle Assemblies, Board Mount, Double-Row,


Closed Entry, .100 x .100 [2.54 x 2.54] Centerline
Horizontal Mount (with Guide
Pin Slots and Standoffs)
.320
[8.13]

.174
Max.
[4.42]
(Point of Contact)
A
.179 .256
Material and Finish B [4.55] [6.50]
Min.
Typ. (See Note 3.)
Housing Glass-filled thermoplastic,
black, 94V-0 rated
Contacts Phosphor bronze, plated .100
as follows: [2.54]
.238
Plating A Duplex plated .000030 [6.05]
[0.00076] gold on contact area, .000050- .144
Dia. .125
[3.66] .069
.000100 [0.00127-0.00254] matte tin on (2 Plc.) [1.75]
[3.17]
solder area, with entire contact under- (Localized CL CL
.115 or .145 Gold Plate Area)
plated .000050 [0.00127] nickel [2.92 or 3.68] .310.010
(See Note 1) [7.880.25]
Plating B Duplex plated .000015
[0.00038] gold on contact area,
.000050-.000100 [0.00127-0.00254]
matte tin on solder area, with entire con-
tact underplated .000050 [0.00127]
nickel
Related Product Data .115 or .145 .115
[2.92 or 3.68] [2.92]
Mateable Headers pages 198, 199 (See Note 2) (See Note 2)
Performance Specifications Keying Plug

Printed Circuit Board


Standard Solder Tails Board Retention Tails
page 194 .310.002 .065.005

Connectors
[7.870.05] [1.650.13]
Technical Documents page 276 to
.100.005
Product Specification [2.540.13]
108-25017
.035.003 .100.003
Application Specification
[0.890.08] Typ.
Dia. [2.540.08]
114-9009 (Finished Hole) Part No. 86286-1
Additional receptacle assembly Recommended PC Board Hole Layout (Plugs into receptacle contact)
sizes and solder tail lengths (for .055 [1.40] min. thick PC board)
are available; minimum order Material Natural color nylon
Tolerances not to accumulate within
quantities may apply. Consult TE.

Dimensions
one connector pattern.

Receptacle Assembly Part Nos.


with .115 [2.92] Solder Tail Lengths
Receptacle Assembly Part Nos.
with .145 [3.68] Solder Tail Lengths
5
No. of
Pos. A B Standard Solder Tails Board Retention Tails Standard Solder Tails
Plating A Plating B Plating A Plating B Plating A
12 .858 [21.79] .500 [12.70] 5-532956-1 5-532955-1 5-534204-2 5-534975-5 5-533009-1
14 .958 [24.33] .600 [15.24] 7-532955-5
16 1.058 [26.87] .700 [17.78] 5-532956-2 6-534204-0 6-534975-5
20 1.258 [31.95] .900 [22.86] 5-532956-3 5-532955-3 5-534204-9 5-534975-6
24 1.458 [37.03] 1.100 [27.94] 5-532956-4 5-532955-4 6-534204-1 5-534975-7
30 1.758 [44.65] 1.400 [35.56] 5-532956-5 5-532955-5 5-534204-4 5-534975-8 5-533009-5
36 2.058 [52.27] 1.700 [43.18] 5-532956-6 5-532955-6 5-534204-3 5-534975-9
40 2.258 [57.35] 1.900 [48.26] 5-532956-7 5-532955-7 6-534204-2 6-534975-0
50 2.758 [70.05] 2.400 [60.96] 5-532956-8 5-532955-8 5-534204-1 6-534975-1 5-533009-8
60 3.258 [82.75] 2.900 [73.66] 5-532956-9 5-532955-9 5-534204-5 6-534975-2 5-533009-9
70 3.758 [95.45] 3.400 [86.36] 6-532956-0 6-532955-0 6-534204-3 6-534975-3 6-533009-0
72 3.858 [97.99] 3.500 [88.90] 6-532956-1 6-532955-1 6-534204-4
80 4.258 [108.15] 3.900 [99.06] 6-532956-2 6-532955-2 5-534204-8 6-534975-4 6-533009-2
86 4.558 [115.77] 4.200 [106.68] 6-532956-3 6-532955-3 6-533009-3
90 4.758 [120.85] 4.400 [111.76] 6-532956-4 6-532955-4
96 5.058 [128.47] 4.700 [119.38] 6-532956-5 6-532955-5 6-534204-5 6-533009-5
100 5.258 [133.55] 4.900 [124.46] 6-532956-6 6-532955-6 5-534204-6 5-534975-1 6-533009-6
110 5.758 [146.25] 5.400 [137.16] 6-532956-7 6-532955-7 6-534204-6
120 6.258 [158.95] 5.900 [149.86] 6-532956-8 6-532955-8 5-534204-7 5-534975-2 6-533009-8
130 6.758 [171.65] 6.400 [162.56] 7-532956-0 7-532955-0 6-534204-7
200 10.258 [260.55] 9.900 [251.46] 7-532956-3 7-532955-3 7-534204-0 5-534975-4
Notes: 1. .115 [2.92] tail length is for use with .062 [1.57] PC boards; .145 [3.68] tail length is for use with .093 [2.36] PC boards.
Notes: 2. Receptacle assemblies with low force contacts are available, consult TE.
3. .256 [6.50] minimum positive pin stop to prevent shorting between rows. Note: All part numbers are RoHS compliant.
195
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Receptacle Assemblies, Board Mount, Double-Row,


Closed Entry, .100 x .100 [2.54 x 2.54] Centerline (Continued)
Vertical Mount .115
[2.92]
(with Guide Pin Slots and .129
Typ.
Standoffs) [3.28]

.410
[10.41] .320
[8.13]

.125
Material and Finish .008 .179 [3.18]
.100 B [0.20] Typ.
[4.55] (Localized
Housing Glass-filled thermoplastic, [2.54]
Typ.
Gold Plate Area)
black, 94V-0 rated
Contacts Phosphor bronze, duplex .144 .238
plated .000030 [0.00076] gold on [3.68] [6.05]
contact area, .000050-.000100 Dia.
.069
[0.00127-0.00254] matte tin on solder [1.75]
.100 .100
area, with entire contact underplated A [2.54] [2.54]
Typ.
.000050 [0.00127] nickel

Related Product Data .100.003


[2.540.08]
Mateable Headers pages 198, 199
Printed Circuit Board

Performance Specifications
page 194
Connectors

.100.003 .035.003
Typ. Dia.
Technical Documents page 276 [2.540.08] [0.890.08]

Product Specification Recommended PC Board Hole Layout


108-25017 (for .055 [1.40] min. thick PC board)
Tolerances not to accumulate within one
Application Specification
connector pattern.
114-9009

5 Additional receptacle assembly


sizes and solder tail lengths
are available; minimum order
quantities may apply. Consult TE.

No. of Dimensions Receptacle Assembly


Pos. A B Part Nos.
30 1.758 [44.65] 1.400 [35.56] 5-534972-1
40 2.258 [57.35] 1.900 [48.26] 5-534972-2
50 2.758 [70.05] 2.400 [60.96] 5-534972-3
60 3.258 [82.75] 2.900 [73.66] 5-534972-4
70 3.758 [95.45] 3.400 [86.36] 5-534972-5
80 4.258 [108.15] 3.900 [99.06] 5-534972-6
Keying Plug 90 4.758 [120.85] 4.400 [111.76] 5-534972-7
100 5.258 [133.55] 4.900 [124.46] 5-534972-8
120 6.258 [158.95] 5.900 [149.86] 6-534972-0

Part No. 86286-1


(Plugs into receptacle contact)

Material Natural color nylon

Note: All part numbers are RoHS compliant.


196
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Receptacle Assemblies, Board Mount, Triple-Row,


Closed Entry, .100 x .100 [2.54 x 2.54] Centerline
Horizontal Mount
(with Guide Pin Slots and A
Standoffs)
.410
[10.41]

.125
.179 [3.18]
Typ. B
[4.55] .100 (Localized
Typ.
[2.54] .100 Gold Plate Area)
Material and Finish [2.54]
.338
Housing Glass-filled thermoplastic, [8.59]
black, 94V-0 rated .100
.115 .145
.144 [2.54]
Contacts Phosphor bronze, plated .069 [2.92] [3.68]
[3.66]
[1.75]
.000030 [0.00076] gold in mating area, Dia.
.000050-.000100 [0.00127-0.00254] Typ.
matte tin on solder area, with entire .300
[7.62]
contact underplated .000050 [0.00127]
.400
nickel [10.16]
Related Product Data
Mateable Headers page 201
Performance Specifications
.115 .145

Printed Circuit Board


page 194
[2.92] [3.68]
Tail Length

Connectors
Technical Documents page 276 .035.003
Typ. Dia.
[0.890.08]
Product Specification .100.003
[2.540.08]
108-25017
Application Specification
114-9009
.400
Additional receptacle assembly .300

5
[10.16]
sizes and solder tail lengths [7.62]
are available; minimum order
quantities may apply. Consult TE.

.065.005
[1.650.13]
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
Tolerances not to accumulate within one
connector pattern.

No. of Dimensions Receptacle Assembly Part Nos.


Pos. A B Plating A
72 2.658 [67.51] 2.300 [58.42] 5-534974-3
93 3.358 [85.29] 3.000 [76.20] 15-534974-4
96 3.458 [87.83] 3.100 [78.74] 1-5-534974-5
150 5.258 [133.55] 4.900 [124.46] 1-5-534974-8
Keying Plug 210 7.258 [184.35] 6.900 [175.26] 6-534974-1

Part No. 86286-1


(Plugs into receptacle contact)

Material Natural color nylon

Note: All part numbers are RoHS compliant.


197
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Headers, Straight Post, Double-Row, .100 x .100 [2.54 x 2.54] Centerline

Solder Posts and Pos.


Ref.
ACTION PIN Posts .065
[1.66]
R
(with Pin Protection 1 2 3 (2 Plc.)
and Guide Pins) .100
[2.54]
.515
[13.08]

.085 .200 .130


[2.16] [5.08] [3.30]
.040 B (2 Plc.)
[1.02]
(4 Sides) A
Material and Finish .200
[5.08]
Housing Glass-filled thermoplastic, .110 (Localized
black, 94V-0 rated [2.79] Gold Plate
Area)
Posts Phosphor bronze, plated as
follows:
.440 .320
Plating A Duplex plated .000030 [11.18] [8.13]
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
matte tin on termination end, with entire .090
post underplated .000050 [0.00127] .130
Board Retention Tails .180 [2.29]
[3.30]
nickel (where indicated) [4.57]
Plating B Duplex plated .000015
[0.00038] gold on contact area,
.000100-.000200 [0.00254-0.00508] .180
Printed Circuit Board

.100.003 .040.003
matte tin on termination end, with entire [2.540.08] [1.020.08] [4.57]
(Finished Hole)
Connectors

post underplated .000050 [0.00127]


nickel
Plating C Selectively plated .000030 .0453.001
.100.003 [1.020.03]
[0.00076] gold on contact area and [2.540.08] (Drilled Hole)
.000015 [0.00038] gold on termination .025 [0.64] Square
end, with gold flash over .000050 Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board) Board Retention Tails
[0.00127] nickel on entire post
Tolerances not to accumulate within one connector pattern.

5
Related Product Data
Mateable Receptacles
pages 195, 196 Header Part Nos. with .180 [4.57] Tail Length
Performance Specifications No. of Dimensions
Standard Solder Tails Board Retention Tails
Pos. A B
page 194 Plating A Plating B Plating A Plating B
ACTION PIN Posts pages 150, 151 12 .980 [24.89] .500 [12.70] 5-102692-1 5-102567-1 6-534978-6 5-534257-5
Application Tooling pages 152 14 1.080 [27.43] .600 [15.24] 7-102567-3
Technical Documents page 276 16 1.180 [29.97] .700 [17.78] 6-102692-5 5-534978-2 6-534257-4
20 1.380 [35.05] .900 [22.86] 6-102692-6 6-102567-1 5-534978-3 5-534257-6
Product Specification 24 1.580 [40.13] 1.100 [27.94] 5-102692-2 5-102567-2 5-534978-4 5-534257-7
108-25017 30 1.880 [47.75] 1.400 [35.56] 6-102692-7 6-102567-3 5-534978-5 5-534257-8
Application Specification 36 2.180 [55.37] 1.700 [43.18] 5-102692-3 5-102567-3 5-534978-6 5-534257-9
114-9009 40 2.380 [60.45] 1.900 [48.26] 6-102692-3 6-102567-2 5-534978-7 6-534257-0
50 2.880 [73.15] 2.400 [60.96] 5-102692-4 5-102567-6 5-534978-8 6-534257-5
Additional header sizes are
available; minimum order 60 3.380 [85.85] 2.900 [73.66] 5-102692-5 5-102567-4 5-534978-9 6-534257-1
quantities may apply. Consult TE. 70 3.880 [98.55] 3.400 [86.36] 6-102692-4 6-102567-0 6-534978-5 6-534257-2
72 3.980 [101.09] 3.500 [88.90] 6-102692-8 6-102567-6 6-534978-0
80 4.380 [111.25] 3.900 [99.06] 5-102692-6 5-102567-8 6-534978-1 5-534257-1
86 4.680 [118.87] 4.200 [106.68] 6-102692-9 6-102567-7
90 4.880 [123.95] 4.400 [111.76] 6-102692-2 6-102567-4
96 5.180 [131.57] 4.700 [119.38] 5-102692-7 5-102567-5 6-534978-7
100 5.380 [136.65] 4.900 [124.46] 5-102692-8 5-102567-9 6-534978-8 5-534257-2
110 5.880 [149.35] 5.400 [137.16] 6-102692-0 6-102567-5 6-534978-2
120 6.380 [162.05] 5.900 [149.86] 5-102692-9 5-102567-7 6-534978-3 5-534257-3
130 6.880 [174.75] 6.400 [162.56] 7-102692-0 6-102567-9 6-534978-9
200 10.380 [263.65] 9.900 [251.46] 6-102692-1 7-102567-1 5-534978-1 6-534257-9
Note: Headers with make first/break last posts can be made available, consult TE.
Note: All part numbers are RoHS compliant.
198
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Headers, Straight Post, Double-Row, .100 x .100 [2.54 x 2.54]


Centerline (Continued)

See chart
below
.025 [0.64] Square
ACTION PIN Tails

Header Part Nos. with ACTION PIN Posts


No. of Dimensions
Pos. .250 [6.35] Tail Length .480 [12.19] Tail Length .680 [17.27] Tail Length
A B
Plating A Plating B Plating A Plating C Plating C
12 .980 [24.89] .500 [12.70] 5-102690-1 5-103291-4
14 1.080 [27.43] .600 [15.24] 5-103291-3
20 1.380 [35.05] .900 [22.86] 6-102690-3 5-103291-6
24 1.580 [40.13] 1.100 [27.94] 5-102690-2 5-103291-7
36 2.180 [55.37] 1.700 [43.18] 5-102690-3 5-103291-9
40 2.380 [60.45] 1.900 [48.26] 6-102690-6 5-103291-2
50 2.880 [73.15] 2.400 [60.96] 5-102690-4 6-103291-0
60 3.380 [85.85] 2.900 [73.66] 5-102690-5 6-103291-1
70 3.880 [98.55] 3.400 [86.36] 6-102690-7 6-103291-2
80 4.380 [111.25] 3.900 [99.06] 5-102690-6 6-103291-4
90 4.880 [123.95] 4.400 [111.76] 6-102690-1 6-103291-6
96 5.180[131.57] 4.700 [119.38] 5-102690-7 6-103291-8
100 5.380 [136.65] 4.900 [124.46] 5-102690-8 6-103291-9 102777-3
120 6.380 [162.05] 5.900 [149.86] 5-102690-9 7-103291-1 5-102691-9 1-102666-1 102777-1
130 6.880 [174.75] 6.400 [162.56] 102666-9

Printed Circuit Board


Notes: 1. Other header sizes can be made available upon request.

Connectors
Headers with ACTION PIN posts are for use with .093 [2.36] nominal or thicker PC boards.
2. Application tooling for installing headers with ACTION PIN posts is shown on pages 152 and 153.
3. Headers with .250 [6.35] tail length can be made available with make first/break last contacts,
consult TE.
4. Plated through holes to be prepared per recommendations found on page 151.

Note: All part numbers are RoHS compliant.


199
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Headers, Right-Angle Post, Double-Row, .100 x .100 [2.54 x 2.54]


Centerline

Card Extender
(with Pin Protection
and Guide Pins) .762
Max.
[19.35]
.599
[15.21]

.040 A
[1.02]
Typ. .320
Material and Finish .100
[8.13]
[2.54]
Housing Glass-filled thermoplastic, .320
black, 94V-0 rated [8.13]
Posts Phosphor bronze, plated as
follows: .065 .100
R 2 3 4 [2.54] .125
[1.65]
Plating A Duplex plated .000030 (2 Plc.) Pos. Board Retention Tails (Localized [3.18]
[0.00076] gold on contact area, Ref. (where indicated) Gold Plate .157 .100
.200 Area)
.000100-.000200 [0.00254-0.00508] [5.08] B
[3.99] [2.54]
matte tin on termination end, with entire Typ. .185
post underplated .000050 [0.00127] [4.70]
nickel Typ.

Plating B Duplex plated .000015


.040.003
[0.00038] gold on contact area,
Printed Circuit Board

[1.020.08] .100.003
.000100-.000200 [0.00254-0.00508] (Finished [2.540.08] .157 .125
Connectors

matte tin on termination end, with entire Hole [3.99] [3.18]


w/Bd. Ret.)
post underplated .000050 [0.00127]
nickel

.035.003
Related Product Data [0.890.08]
Dia. Typ.
(Standard .100.003 .025 [0.64] Square
Mateable Receptacles Finished Hole) [2.540.08] Board Retention Tails
pages 195, 196
Performance Specifications Recommended PC Board Hole Layout

5 page 194

Technical Documents page 276


(for .055 [1.40] min. thick PC board)

Tolerances not to accumulate within one


connector pattern.

Product Specification
108-25017
Application Specification
Header Part Nos. with .125 [3.18] Tail Length
114-9009 No. of Dimensions
Pos. Standard Solder Tails Board Retention Tails
A B
Additional header sizes are Plating A Plating B Plating A
available; minimum order 12 .980 [24.89] .500 [12.70] 6-102802-2 5-102589-8 5-534245-5
quantities may apply. Consult TE. 16 1.180 [29.97] .700 [17.78] 6-102802-4 5-534245-4
20 1.380 [35.05] .900 [22.86] 6-102802-5 6-102589-2 5-534245-6
24 1.580 [40.13] 1.100 [27.94] 6-102802-3 5-102589-6 5-534245-7
30 1.880 [47.75] 1.400 [35.56] 6-102802-6 5-102589-4 5-534245-2
36 2.180 [55.37] 1.700 [43.18] 5-102802-3 5-102589-2 5-534245-8
40 2.380 [60.45] 1.900 [48.26] 5-102802-8 6-102589-3
50 2.880 [73.15] 2.400 [60.96] 5-102802-4 5-102589-5 5-534245-1
60 3.380 [85.85] 2.900 [73.66] 5-102802-9 5-102589-7
72 3.980 [101.09] 3.500 [88.90] 6-102802-7 6-102589-7
80 4.380 [111.25] 3.900 [99.06] 5-102802-5 5-102589-1 6-534245-0
90 4.880 [123.95] 4.400 [111.76] 6-102802-0 6-102589-4
100 5.380 [136.65] 4.900 [124.46] 5-102802-6 5-102589-3 6-534245-1
120 6.380 [162.05] 5.900 [149.86] 5-102802-2 6-102589-1 5-534245-3
130 6.880 [174.75] 6.400 [162.56] 6-102802-9 6-102589-9 6-534245-3
Note: Headers with make first/break last posts can be made available, consult TE.

Note: All part numbers are RoHS compliant.


200
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Headers, Straight Post, Triple-Row, .100 x .100 [2.54 x 2.54] Centerline

Solder Posts Pos.


Ref.
(with Pin Protection .065
[1.65]
R
and Guide Pins) 1 2 3 (2 Plc.)
.100
[2.54]
.615
[15.62]

.100
[2.54] .200
.085 [5.08]
[2.16] B
.040
[1.02]
A
Material and Finish (4 Sides)

Housing Glass-filled thermoplastic, .200


black, 94V-0 rated .210 [5.08]
[5.33] (Localized
Posts Phosphor bronze, plated as
Gold Plate
follows: Area)
Plating A Duplex plated .000030 .090
[0.00076] gold on contact area, .440 [2.29]
.000100-.000200 [0.00254-0.00508] [11.18]
matte tin on termination end, with entire
.320
post underplated .000050 [0.00127] [8.13]
nickel .180
Board Retention Tails
(where indicated) [4.57]

Related Product Data

Printed Circuit Board


Mateable Receptacles page 197 .0453.001
.040.003 [1.1510.03]

Connectors
Performance Specifications [1.660.08] (Drilled Hole) .200
page 194 (Finished Hole) [5.08] .180
[4.57]

Technical Documents page 276


Product Specification
108-25017
.100.003 .100
Application Specification [2.540.08] [2.54] .025 [0.64] Square
114-9009 Board Retention Tails

Additional header assembly sizes


are available; minimum order
quantities may apply. Consult TE.
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)

Tolerances not to accumulate within one


5
connector pattern.

Header Part Nos.


Dimensions with .180 [4.57] Tail Length
No. of
Pos. Standard Board
A B Solder Tails Retention Tails
Plating A Plating A
72 2.780 [70.61] 2.300 [58.42] 5-103264-1 5-534258-1
96 3.480 [88.39] 3.000 [76.20] 5-534258-3
150 5.380 [136.65] 4.900 [124.46] 5-103264-3
210 7.380 [187.45] 6.900 [175.26] 5-103264-4

Note: All part numbers are RoHS compliant.


201
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Headers, VRM (Voltage Regulator Module),


.100 x .100 [2.54 x 2.54] Centerline
Solder Posts and A
ACTION PIN Posts (with B
Pin Protection, Guide
Ribs, and Latching)

.515
[13.08]
Material and Finish
Housing Glass-filled thermoplastic,
black, 94V-0 rated
Posts Copper alloy, duplex plated .110
[2.79] .120
.000030 [0.00076] gold on contact area, [3.05]
.000100-.000200 [0.00254-0.00508] .320
matte tin on termination end, with entire [8.13]
post underplated .000050 [0.00127]
.440
nickel [11.18]

Related Product Data


Mateable Receptacles
pages 195, 196
Performance Specifications Housing Outline
page 194 B
ACTION PIN Posts
.100
Printed Circuit Board

page 150, 151 [2.54]


Application Tooling
Connectors

.125
pages 152 .290
[3.18]
[7.37]

.100 .040 +.003


[2.54] [1.02 +.08] .525
[13.33]
Technical Documents page 276
Product Specification Recommended PC Board Hole Layout
108-25017
Application Specification

5 114-9009

No Dimensions Header Part No.


of
Pos A B Standard Solder Tails .250 Length ACTION PIN Tails

30 2.450 [62.23] 1.400 [35.56] 5-146205-1


3.095 [78.62] 1.900 [48.26] 5-147254-1
40
3.100 [78.74] 1.900 [48.26] 5-146315-1

Note: All part numbers are RoHS compliant.


202
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Accessories: End Shrouds for Machine-Applied Posts


Mating Polarized Single-Row, .100 [2.54] Centers
Housing
Part No. 102338-1
Material Black thermoplastic, flame
retardant
.066
[1.68] .164
[4.17]

End .290
Shroud [7.37]

.050
[1.27]
.712
[18.08]

.059
[1.50] .350
Board Mounted PC Board Max. [8.89]
Straight Posts

Typical Assembly
Break Line for 7 Pos.
.066 or Larger Header
[1.68] .029
[0.74]
Technical Documents page 276 Dia.

Printed Circuit Board


Connectors
Double-Row, .100 x .100 [2.54 x 2.54] Centers
Part No. 102114-1
Material Black glass-filled
polyester 5
.405 .280
[10.29] [7.11]

.150 .050
[3.81] [1.27]
.890
[22.61]

.059
[1.50]
Max. .350
[8.89]

Break Line for 14 Pos.


or Larger Header
.029
.066 [0.74]
[1.68] Dia.

Note: All part numbers are RoHS compliant.


203
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Accessories: Barrier Insert, Part No. 87743-1


Material .037
.446 .340
[11.33] [8.64] .030
Black polyester [0.94] .090 [0.76]
[2.29]
Technical Documents page 276

The barrier insert can be .031-.043


used on double row headers [0.79-1.09]
.314 .030 Dia. x .250[
(.100 x .100 [2.54 x 2.54] [7.98] .127 [0.76] [6.35]
centers), including shrouded [3.23]
Deep
versions3 and 4 sides, remainder
.100 .029.001
as well as unshrouded [2.54] [0.740.03]
.087 Dia.
straight post headers. With [2.21] Thru Typ. (2)
one barrier insert several
45 .094
configurations can be [2.39]
obtained, providing headers .047
[1.19]
with capabilities of accept-
ing various combinations of
polarized and non-polarized Barrier Insert Cutoffs
AMPMODU connectors.
For unshrouded headers,
the barrier insert is used
to establish polarization
and to compartmentalize
the header. For shrouded
headers, the barrier insert is Fig. 1 Fig. 2 Fig. 3 Fig. 4
used to compartmentalize Partial Cutoff Partial Cutoff Complete Cutoff Complete Cutoff
Printed Circuit Board

(Left and Right Sides) (Left Side) (Left Side) (Left and Right Sides)
the header, while maintaining Complete Cutoff Partial Cutoff
Connectors

polarization. The barrier (Right Side) (Right Side)


insert itself is notched to
facilitate cutting off the
ends with a simple tool
such as tin snips or scissors
to achieve the desired
configuration.
Typical Barrier Insert Applications

5 For Unshrouded Double-Row, Straight Post Headers,


.100 x .100 [2.54 x 2.54] Centers
See Fig. 3 See Fig. 4 See Fig. 1 See Fig. 2

Note: All configurations of barrier inserts compartmentalize headers and maintain polarization,
except bar (Fig. 4) configuration, which is used primarily for compartmentalizing headers.

For Shrouded Double-Row, 3 and 4 Sided Headers,


.100 x .100 [2.54 x 2.54] Centers
See Fig. 2 See Fig. 4 See Fig. 1 See Fig. 3

Note: Right-angle (Figs. 2 and 3) and T (Fig. 1) configurations of barrier insert establish
polarization; bar (Fig. 4) configuration of barrier insert compartmentalizes header.

Note: All part numbers are RoHS compliant.


204
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Accessories: Snap-In Polarizer for Low Profile Headers


Material
Black thermoplastic, flame retardant .134
[3.40]
Part Numbers .335
499991-2 (Packaged 50 per bag) [8.51]

499991-3 (Packaged 1000 per bag)


Break Line
(See below.)
Related Product Data
Low Profile Headers used with
pages 135-140

Break Line
.335
(See below.)
[8.51]

.134
[3.40]

The snap-in polarizer provides military polarization for low


profile headers. Installation of the polarizer is as follows:

Printed Circuit Board


Connectors
Orient the polarizer so that the

5
polarizer latch is on the same side
as the inner wall (post side) of the
header housing.

Slide the polarizer over the Break Line


polarizing slot of the housing until
the latch engages the hole. Snap
off the tab at the break line next to
the housing. Using the remaining
polarizer, repeat the process for the
other housing location.

Note: For Post Shunts, contact TE.

Note: All part numbers are RoHS compliant.


205
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Locking Clip Contacts and Housings

Product Facts
Self-retaining contacts
provide permanent
connection with quick
connect and disconnect
Fast, easy installation with
no additional locking
hardware required
Mates with .025 [0.64]
square posts in a variety
of configurations
Single- and double-row
configurations in up to
20 positions on .100 [2.54]
centers
Modular design permits
end-to-end stacking
(double- row only) for
circuit grouping
Choice of tin or select gold
plating
Housings made of 94V-0
Contacts and Housings

rated glass-filled polyester


Locking Clip

Recognized under the


Component Program
of Underwriters
Laboratories Inc., R

File No. E28476


Typical Application
Certified by Canadian
Standards Single
Association,
R

Contact

5 File No. LR 7189

Performance Single Row


(Page 207)

Both Ends
Closed
(for specified
no. of circuits
Left End
Characteristics Both Ends
housing size)
Open (for
Closed stacking to
(Page 209)
Contact Current Rating (Page 208) left side)
(Page 209)
3 amperes
Termination Resistance
12 milliohms (max.) Gold plated Right End
Open (for
contacts stacking to
16 milliohms (max.) Tin plated right side)
contacts PC Board
(Page 209)

Durability Ref. Product


Specification 108-36028 and
108-36028-1
.100 x .100
[2.54 x 2.54]

.200/.277*
[5.08/7.04]
(without
Extraction
housing
Tool Slot
Contact
Clearance
Hole
.025 .273/.350*
[0.64] [6.93/8.89]
Sq. Posts (with housing)

*If post is longer than maximum specified, post tip may butt against wire ends.
Dimension defines .025 x .025 [0.64 x 0.64] portion of post.
206
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Locking Clip Contacts

Wire Crimp Contacts


with Insulation Support
Body

Material and Finish


Contact Spring Stainless steel
Pating A Selectively plated Spring
.000050 [0.00127] gold on contact area,
with gold flash over .000050 [0.00127]
nickel on entire contact A
Pating B Selectively plated
.000030 [0.00076] gold on contact area,
with gold flash over .000050 [0.00127]
nickel on entire contact
Pating C .000100-.000200
[0.00254-0.00508] bright tin over
.000050 [0.00127] nickel on entire
contact

Wire Size Heavy Duty Miniature


Ins. Dimension Part Nos. Applicator for Hand
Range Dia. Finish Tool
A Strip Form Loose Piece AMP-O-LECTRIC
AWG [mm2] Range Machine* No.
Plating B 87190-1 87191-1
30-28 0.05-0.09 .029-.039 [0.74-0.99] .550 [13.97] 567310-2 90295-1
Plating C 5-87190-2 5-87191-2
Plating A 87124-3 87165-3
26-22 0.12-0.4 .038-.062 [0.97-1.57] .584 [14.83] Plating B 87124-1 87165-1 466721-2 91533-1

Contacts and Housings


Plating C 5-87124-2 5-87165-2

Locking Clip
Plating B 867052-2
20 0.5-0.6 .038-.062 [0.97-1.57] .584 [14.83] 679996-2 90431-1
Plating C 5-867052-1
*For use with AMP-O-LECTRIC Model K machines. Call the Technical Support Center (1-800-522-6752) for part nos. of applicators for use with the
AMP-O-LECTRIC Model G machines (shown on page 270), as well as other bench machines and fully automatic AMPOMATOR lead making machines.
Notes: 1. These contacts must be crimped in accordance with TE Specification No. 114-25006 in order to function properly in a connector housing.
2. Extraction Tool No. 91084-1 is used for removing individual contacts from connector housings and for detaching contacts from mating posts.

Related Product Data


Housings Used With
pages 208, 209
5
Application Tooling page 272

Technical Documents Wire Harnessing Fixed


pages 277, 278 Clamp
If necessary, wires can be
Product Specification grouped with cable ties and
108-36028, 108-36028-1 secured to a panel with
Application Specification fixed clamps. However,
114-25006 Unrestricted
locking clip contacts must Wires for
be free to float within the Free-Floating
connector housings to Contacts

allow proper extraction.


Therefore, harnessing Cable
hardware or the use of Tie
multiple terminations per
contact must not restrict
the free-floating action of
contacts in the housing.
For more information
request Insulation and
Bundling Products Catalog
124132.
Extraction Tool
No. 91084-1
Note: All part numbers are RoHS compliant.
207
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Wire-Applied Housings for Locking Clip Contacts,


Single-Row, .100 [2.54] Centerline
Single-Row .060
[1.52]

.700
[17.78]
.350
.273 (Post
[ ]
8.89 Length)
6.93
Material
Glass-filled polyester, 94V-0 rated .025 [0.64]
.145 Sq. Post
[3.68] (Shown for
Ref. only)
Related Product Data A
Contacts page 207 C
.175
[4.44]
Mateable Headers and Posts Typ.
.085
Refer to the Mating Post Selection [2.16]
Guide page 90

.100
Technical Documents [2.54]
Typ.
pages 277, 278 B
Contacts and Housings

Product Specification Note: Housing illustrated above is the Both Ends Closed version.
108-36028, 108-36028-1
Locking Clip

Application Specification
114-25006
.125 [3.18] centerline single-row,
2 and 3 position housings are
available, Base Part No. 104905.
They are designed to be stackable
end-to-end and side-by-side.
Consult TE.

5 No. of Dimensions Housing Part No.


Pos. A B C Unstamped Stamped
1 .108 [2.74] .054 [1.37] 87175-2
2 .216 [5.49] .100 [2.54] .058 [1.47] 87175-6
3 .316 [8.03] .200 [5.08] .058 [1.47] 87175-8
4 .416 [10.57] .300 [7.62] .058 [1.47] 1-87175-0
5 .516 [13.11] .400 [10.16] .058 [1.47] 1-87175-2
6 .616 [15.65] .500 [12.70] .058 [1.47] 1-87175-4 1-87175-3
7 .716 [18.19] .600 [15.24] .058 [1.47] 1-87175-6 1-87175-5
8 .816 [20.73] .700 [17.78] .058 [1.47] 1-87175-8 1-87175-7
Keying Plug 9 .916 [23.27] .800 [20.32] .058 [1.47] 2-87175-0 1-87175-9
10 1.016 [25.81] .900 [22.86] .058 [1.47] 2-87175-2 2-87175-1
11 1.116 [28.35] 1.000 [25.40] .058 [1.47] 2-87175-4 2-87175-3
12 1.216 [30.89] 1.100 [27.94] .058 [1.47] 2-87175-6 2-87175-5
13 1.316 [33.43] 1.200 [30.48] .058 [1.47] 2-87175-8 2-87175-7
14 1.416 [35.97] 1.300 [33.02] .058 [1.47] 3-87175-0 2-87175-9
15 1.516 [38.51] 1.400 [35.56] .058 [1.47] 87175-4 87175-3

Part No. 87179-1


(Plugs directly into housings for
.025 [0.64] square post contacts)

Material Yellow, nylon Note: All part numbers are RoHS compliant.
208
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Wire-Applied Housings for Locking Clip Contacts,


Double-Row, .100 x .100 [2.54 x 2.54] Centerline
Double-Row .300
[7.62]

.700
[17.78]

.350 Max.
[8.89]
(Post Length)

Material
Glass-filled polyester, 94V-0 rated .025 [0.64]
Sq. Post
.270 (Shown for A
[6.86] Ref. only) .100
Related Product Data [2.54]
Typ.
.100
Contacts page 207 [2.54]
Mateable Headers and Posts
Refer to the Mating Post Selection
Guide page 90

Technical Documents .058 B


[1.47]

Contacts and Housings


pages 277, 278
Note: Housing illustrated above is the Both Ends Closed version.
Product Specification

Locking Clip
108-36028, 108-36028-1
Application Specification
114-25006

Both Ends Closed

5
Key
Keyway
Right End Open Left End Open

Housing No. of Dimensions Housing Part No.


Configuration Pos. A B Unstamped Stamped
2 .116 [2.95] 87176-2
4 .216 [5.49] .100 [2.54] 87133-1
Keying Plug 6 .316 [8.03] .200 [5.08] 87133-7 87133-8
8 .416 [10.57] .300 [7.62] 87133-9 1-87133-0
Both Ends Closed 10 .516 [13.11] .400 [10.16] 87133-2 87133-5
12 .616 [15.65] .500 [12.70] 1-87133-1 1-87133-2
16 .816 [20.73] .700 [17.78] 1-87133-3 1-87133-4
18 .916 [23.27] .800 [20.32] 1-87133-5 1-87133-6
20 1.016 [25.81] .900 [22.86] 87133-3 87133-6
4 .216 [5.49] .100 [2.54] 87132-1
Right End Open 10 .516 [13.11] .400 [10.16] 87132-2 87132-5
20 1.016 [25.81] .900 [22.86] 87132-3 87132-6
4 .216 [5.49] .100 [2.54] 87131-1
Part No. 87179-1
Left End Open 10 .516 [13.11] .400 [10.16] 87131-2 87131-5
(Plugs directly into housings for
.025 [0.64] square post contacts) 20 1.016 [25.81] .900 [22.86] 87131-3 87131-6

Material Yellow, nylon


Note: All part numbers are RoHS compliant.
209
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Mod IV Wire-Applied Contacts and Housings

Product Facts
Terminates 32-20 AWG
[0.03-0.6mm2] discrete wire
Contacts have insulation
support
Choice of three contact
mating pressures
Available in a variety of
gold and tin platings
Receptacles mate with .025
[0.64] square or round posts
Dual cantilever contact
beam with built-in
anti-overstress feature
for reliable matings
Housings accept a variety of
receptacle and pin contacts
Housing sizes range up to
100 positions
Housing configurations
include single- and double-
Contacts and Housings

rows on .100 [2.54]


Mod IV Wire-Applied

centerlines
Housing options include
detent latching, polarization
and bonded strain relief/ 1-87631-5 D-R Housing, Polarized with Detent
pull tabs 6-87756-6 Std. Pressure Contacts Wire-to-Board
Recognized under the 1-87456-5 D-R Housing, Plain
102387-1 D-R Ejection Housing,
Component Program of Center Polarized 6-87756-6 Std. Pressure Contacts
Underwriters 6-87756-6 Std. Pressure Contacts 87483-3 D-R Housing with Mounting Ears

5
Laboratories Inc.,
File No. E28476
Certified by Canadian
Standards
R

1825851-1 Latch

5102154-1 Hdr
6-87756-6 Std. Pressure Contacts
102241-8 S-R Housing Polarized with
Detent
102128-1 High Pressure Contacts

Association, R
103168-8
File No. LR 7189 5-103166-8 Hdr Hdr

3-87977-5 D-R Housing, Polarized 1-87756-6 Std. Pressure Plain


6-87756-6 Std. Pressure Contacts 6-87456-6 D-R Housing, Contacts
1-87232-0
Hdr
5-103166-8 Hdr

Performance
1-87499-8 S-R Housing, Plain
Characteristics 102128-1 High Pressure Contacts 5-102202-7 Hdr

Contact Current Rating


3 amperes
Termination Resistance
12 milliohms (max.) Beryllium
copper contacts
20 milliohms (max.) Copper-tin-
phosphor bronze contacts
Durability Ref. Product
Specification 108-25020

Note: All part numbers are RoHS compliant.


210
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Mod IV Pin and Receptacle Contacts

Crimp Snap-In (No-strip)


.058
Receptacles and Crimp [1.47]
Snap-In Pins with No-Strip Pin with
Insulation Support Receptacle .815 Insulation Support
.470 [20.70]
(Standard Pressure) .165
[4.19] [11.94]

.016
[0.41]
Gap Max. .068
[1.73]

Crimp Snap-In (No-strip) Receptacles


Ins. Heavy Duty Miniature Hand
Part Nos. Applicator No.
Dia. Finish Tool
Range Strip Form Loose Piece for AMP-O-LECTRIC Part No.
Machine*
Plating A 87107-5 102348-2
.040-.055 [1.02-1.40] 567307-2 90381-1
Plating C 87107-6 102348-3

Standard Pressure
Configuration

Material and Finish


Crimp Snap-In Pins with Insulation Support

Mod IV Contacts
Beryllium copper, phosphor bronze, or
copper-tin-phosphor bronze (see Wire Heavy Duty Miniature Hand
Size Ins. Part Nos. Tool
charts), plated as follows: Dia. Applicator No.
Range Finish Part No.
(Max.) Strip Form Loose Piece for AMP-O-LECTRIC
Plating A Selectively plated .000030 AWG [mm2] Machine* Premium Commercial
[0.00076] gold on contact area, with gold Plating A 102095-3 102107-2
flash over .000050 [0.00127] nickel on 26-22 0.12-0.4 .061 Plating B 102095-2 102107-1 466812-2 91517-1 58641-1
[1.55]
entire contact Plating C 5-102095-4 5-102107-3
Plating B Selectively plated .000015 *For use with AMP-O-LECTRIC Model K machines. Call the Technical Support Center (1-800-522-6752) for part nos.
[0.00038] gold on contact area, with gold of applicators for use with the AMP-O-LECTRIC Model G machines (shown on page 270), as well as other bench
flash over .000050 [0.00127] nickel on machines and fully automatic AMPOMATOR lead making machines.
entire contact
Plating C .000100-.000200
[0.00254-0.00508] tin over .000030
[0.00076] nickel on entire
PRO-CRIMPER II hand tool frame with die set assembly.

Die Set Part No. 58641-2


5
contact

Related Product Data


Housings Used With
pages 214-220
Performance Characteristics
page 210
Application Tooling
page 270-272

Technical Documents
pages 276-278
Product Specification
108-25007, 108-25019, 108-25020,
108-25021
Application Specification
114-25003, 114-25016

Additional header sizes are


available; minimum order
quantities may apply.
Consult TE.
Note: All part numbers are RoHS compliant.
211
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Mod IV Receptacle Contacts

Crimp Snap-In Receptacles


with Insulation Support Standard Pressure
(Standard, Intermediate A
and High Pressure)
.058
Material and Finish [1.47]

Beryllium copper, phosphor bronze or


copper-tin-phosphor bronze (see charts,
on following page), plated as follows: .165 A
[4.19]
Plating A Duplex plated .000030
[0.00076] gold on contact area, .000100- .068
.000200 [0.00254-0.00508] tin on crimp [1.73]
area, with entire contact underplated
.000050 [0.00127] nickel
Plating B Duplex plated .000015
[0.00038] gold on contact area, .000100-
.000200 [0.00254-0.00508] tin on crimp Intermediate Pressure
area, with entire contact underplated A
.000050 [0.00127] nickel
Plating D Selectively plated .000050
[0.00127] gold on contact area, with gold
flash over .000050 [0.00127] nickel on
entire contact
Plating E Selectively plated .000030
[0.00076] gold on contact area, with gold
flash over .000050 [0.00127] nickel on
Mod IV Contacts

entire contact
Plating F Selectively plated .000015
[0.00038] gold on contact area, with gold
flash over .000050 [0.00127] nickel on
entire contact
Plating G .000100-.000200
[0.00254-0.00508] tin over .000030
[0.00076] nickel on entire contact
High Pressure

5 Related Product Data


Housings Used With
pages 214-220
A

Performance Characteristics
page 210
Application Tooling
pages 270-272

Technical Documents
pages 277, 278
Product Specification
108-25007, 108-25019, 108-25020,
108-25021
Application Specification
114-25003, 114-25016 Mating Force Unmating Force A-Gap Dimension
Standard Pressure 9 oz. Max. 1.5 oz. Min. .008/.014
Intermediate Pressure 16 oz. Max. 2 oz. Min. .008/.014
High Pressure 20 oz. Max. 3 oz. Min. .013.002

212
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Mod IV Receptacle Contacts (Continued)


Standard Pressure (Mod IV)
Wire Heavy Duty Miniature Applicator for Hand
Size Ins. Part Nos. Tool
Dimension Applicator for Stripper/
Range Dia. Material Finish Part Nos.
A Strip Form Loose Piece AMP-O-LECTRIC Crimper
(Max.) Machine* Machine
AWG [mm2] Premium Commercial
Cu-Sn-Ph Bz Plating A 5-102316-8 6-102316-4
Cu-Sn-Ph Bz Plating B 5-102316-6 6-102316-3
Be Cu Plating D 1-102917-1 1-102917-2
32-27 0.03-0.1 .040 [1.02] .445 [11.30] 466655-2 466921-1 91541-1
Be Cu Plating E 102917-1 102917-2
Be Cu Plating F 102917-5 102917-6
Cu-Sn-Ph Bz Plating G 102316-5 1-102316-2
Cu-Sn-Ph Bz Plating A 6-87756-7 6-87756-8
Cu-Sn-Ph Bz Plating B 6-87756-2 6-87756-6
Cu-Sn-Ph Br Plating G 87756-6 87756-7
26-22 0.12-0.4 .061 [1.55] .445 [11.30] Be Cu Plating D 1-87666-6 87667-5 466571-2 466918-1 91517-1 58641-1
Be Cu Plating E 87666-2 87667-2
Be Cu Plating F 87666-5 87667-5
Be Cu Plating G 87666-3 87667-3
Cu-Sn-Ph Bz Plating A 6-87523-8 6-87523-9
Cu-Sn-Ph Bz Plating B 2-87523-3 2-87523-4
Be Cu Plating E 85969-8 86016-2
24-20 0.2-0.6 .069 [1.75] .470 [11.94] 466562-2 466905-1 91516-1
Be Cu Plating F 85969-6 86016-5
Cu-Sn-Ph Br Plating G 87523-5 87523-6
Be Cu Plating G 85969-9 86016-3

Mod IV Contacts
Intermediate Pressure (Mod IV.v)
Wire Heavy Duty Miniature Applicator for Hand
Size Ins. Part Nos. Tool
Dimension Applicator for Stripper/
Range Dia. Material Finish Part Nos.
A Strip Form Loose Piece AMP-O-LECTRIC Crimper
(Max.) Machine* Machine
AWG [mm2] Premium Commercial
Cu-Sn-Ph Bz Plating A 5-102920-1 5-102920-2
32-27 0.03-0.1 .040 [1.02] .445 [11.30] 466655-2 466921-1 91541-1
Be Cu Plating E 102918-1 102918-2
Cu-Sn-Ph Bz Plating A 5-103171-4 5-103171-5
Cu-Sn-Ph Bz Plating B 5-103171-1 5-103171-2
26-22 0.12-0.4 .061 [1.55] .445 [11.30] 466571-2 466918-1 91517-1 58641-1
Be Cu Plating E 102548-5 102548-6

24-20 0.2-0.6 .069 [1.75] .470 [11.94]


Be Cu
Cu-Sn-Ph Bz
Cu-Sn-Ph Bz
Be Cu
Plating F

Plating E
102548-1

86492-6
102548-3
Plating A 2-87195-3 2-87195-6
Plating B 2-87195-4 2-87195-5
87046-3 466562-2 466905-1 91516-1
5
Be Cu Plating F 86492-2 87046-1
Be Cu Plating G 86492-9 87046-4

High Pressure (Mod V)**


Wire Heavy Duty Miniature Applicator for Hand
Size Ins. Part Nos.
Range Dia. Dimension Material Finish
Applicator for AMP-O-MATIC Tool
(Max.) A AMP-O-LECTRIC Stripper/Crimper Part Nos.
AWG [mm2] Strip Form Loose Piece Machine* Machine
32-27 0.03-0.1 .040 [1.02] .445 [11.30] Ph Bz Plating E 103455-1 103455-2 466655-2 466921-1 91541-1
Ph Bz Plating E 87809-1 102128-1
26-22 0.12-0.4 .061 [1.55] .445 [11.30] 466571-2 466918-1 91517-1
Ph Bz Plating G 87809-2 102128-2
Ph Bz Plating E 87309-9 1-87309-4
24-20 0.2-0.6 .069 [1.75] .470 [11.94] 466562-2 466905-1 91516-1
Ph Bz Plating G 87309-8 1-87309-3
**For use with AMP-O-LECTRIC Model K machines. Call the Technical Support Center (1-800-522-6752) for part nos. of applicators for use with the
AMP-O-LECTRIC Model G machines (shown on page 270), as well as other bench machines and fully automatic AMPOMATOR lead making machines.
**Contact material is phosphor bronze.
PRO-CRIMPER II hand tool frame with die set assembly.

Die Set Part No. 58641-2

Note: All part numbers are RoHS compliant.


213
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Mod IV Wire-Applied Housings, Single-Row, .100 [2.54] Centerline

Non-Polarized

.600
[15.24]

.175
Material [4.45]
A
Black thermoplastic, flame retardant Max.
.050
[1.27] B .003 C .003
[0.08] [0.08]
Typ.
Related Product Data .070 .100 .072
[1.78] Typ. .140 [1.83]
[2.54]
Typ. [3.56]
Contacts pages 211-213 X
Mateable Headers and Posts
pages 93-95, 101-103
X
Section X-X

Technical Documents
pages 277, 278 No. of Dimensions Part No.
Product Specification Pos. A B C Stamped* Unstamped**
108-25007, 108-25019, 108-25020, 1 .105 [2.67] 7-87499-2
Mod IV Wire-Applied Housings

108-25021 2 .205 [5.21] .100 [2.54] 87499-3 87499-4


Application Specification 3 .305 [7.75] .100 [2.54] .100 [2.54] 87499-5 87499-6
114-25003, 114-25016 4 .405 [10.29] .200 [5.08] .100 [2.54] 87499-7 87499-8
5 .505 [12.83] .200 [5.08] .200 [5.08] 87499-9 1-87499-0
6 .605 [15.37] .300 [7.62] .200 [5.08] 1-87499-1 1-87499-2
7 .705 [17.91] .300 [7.62] .300 [7.62] 87499-1 87499-2
8 .805 [20.45] .400 [10.16] .300 [7.62] 1-87499-3 1-87499-4
9 .905 [22.99] .400 [10.16] .400 [10.16] 1-87499-5 1-87499-6
10 1.005 [25.53] .500 [12.70] .400 [10.16] 1-87499-7 1-87499-8
11 1.105 [28.01] .500 [12.70] .500 [12.70] 1-87499-9 2-87499-0
12 1.205 [30.61] .600 [15.24] .500 [12.70] 2-87499-1 2-87499-2

5 13
14
15
16
1.305 [33.15]
1.405 [35.69]
1.505 [38.23]
1.605 [40.77]
.600 [15.24]
.700 [17.78]
.700 [17.78]
.800 [20.32]
.600 [15.24]
.600 [15.24]
.700 [17.78]
.700 [17.78]
2-87499-3
2-87499-5
2-87499-7
2-87499-9
2-87499-4
2-87499-6
2-87499-8
3-87499-0
17 1.700 [43.18] .800 [20.32] .800 [20.32] 3-87499-2
Keying Plugs 18 1.805 [45.85] .900 [22.86] .800 [20.32] 3-87499-4
19 1.900 [48.26] .900 [22.86] .900 [22.86] 3-87499-6
20 2.005 [50.93] 1.000 [25.40] .900 [22.86] 3-87499-7 3-87499-8
21 2.100 [53.34] 1.000 [25.40] 1.000 [25.40] 4-87499-0
22 2.205 [56.01] 1.100 [27.94] 1.000 [25.40] 4-87499-2
23 2.300 [58.42] 1.100 [27.94] 1.100 [27.94] 4-87499-4
24 2.400 [60.96] 1.200 [30.48] 1.100 [27.94] 4-87499-6
Part No. 86286-1 25 2.500 [63.50] 1.200 [30.48] 1.200 [30.48] 4-87499-8
(Plugs into standard or intermediate 26 2.605 [66.17] 1.300 [33.02] 1.200 [30.48] 5-87499-0
pressure receptacle contact) 27 2.700 [68.58] 1.300 [33.02] 1.300 [33.02] 5-87499-2
28 2.800 [71.12] 1.400 [35.56] 1.300 [33.02] 5-87499-4
Material Natural color nylon
29 2.900 [73.66] 1.400 [35.56] 1.400 [35.56] 5-87499-6
30 3.005 [76.33] 1.500 [38.10] 1.400 [35.56] 5-87499-8
31 3.100 [78.74] 1.500 [38.10] 1.500 [38.10] 6-87499-0
32 3.200 [81.28] 1.600 [40.64] 1.500 [38.10] 6-87499-2
33 3.300 [83.82] 1.600 [40.64] 1.600 [40.64] 6-87499-4
34 3.400 [86.36] 1.700 [43.18] 1.600 [40.64] 6-87499-6
35 3.500 [88.98] 1.700 [43.18] 1.700 [43.18] 6-87499-8
36 3.600 [91.44] 1.800 [45.72] 1.700 [43.18] 7-87499-0
**Cavity identification, part number and date code stamped on housing where size permits.
**No marking on housing.
Notes: 1. Strain reliefs are available and may be purchased separately. Consult TE.
Part No. 87077-2 Notes: 2. Contact Extraction/Lance Reset Tool No. 843996-3.
(Plugs directly into housing)
Note: All part numbers are RoHS compliant.
214
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Mod IV Wire-Applied Housings, Single-Row, .100 [2.54] Centerline (Continued)


Recessed Area
Polarized (with
Detent Latching)

.175
[4.45]

Material
Black thermoplastic, flame retardant .050 Typ.
[1.27]
.072
.071 B .003 C .003 .600
[1.83]
[0.08] [0.08]
[1.80] [15.24]
Related Product Data X

Contacts pages 211-213 .182


[4.62]
Mateable Headers and Posts X
pages 115, 116 .056 .100
.100
.127
Section X-X
[2.54]
Flexible Film Connectors, [1.42] [2.54] Typ. [3.23]
Single-Row Pin Assemblies Typ.
Catalog 82007

Mod IV Wire-Applied Housings


No. of Dimensions Part Nos.
Pos. A B C Unstamped*
Technical Documents
3 .300 [7.62] .100 [2.54] .100 [2.54] 102241-1
pages 277, 278
4 .400 [10.16] .200 [5.08] .100 [2.54] 102241-2
Product Specification 5 .500 [12.70] .200 [5.08] .200 [5.08] 102241-3
108-25007, 108-25019, 108-25020, 6 .600 [15.24] .300 [7.62] .200 [5.08] 102241-4
108-25021
7 .700 [17.78] .300 [7.62] .300 [7.62] 102241-5
Application Specification 8 .800 [20.32] .400 [10.16] .300 [7.62] 102241-6
114-25003, 114-25016
9 .900 [22.86] .400 [10.16] .400 [10.16] 102241-7
10 1.000 [25.40] .500 [12.70] .400 [10.16] 102241-8
11 1.100 [27.94] .500 [12.70] .500 [12.70] 102241-9

5
12 1.200 [30.48] .600 [15.24] .500 [12.70] 1-102241-0
13 1.300 [33.02] .600 [15.24] .600 [15.24] 1-102241-1
14 1.400 [35.56] .700 [17.78] .600 [15.24] 1-102241-2
15 1.500 [38.10] .700 [17.78] .700 [17.78] 1-102241-3
16 1.600 [40.64] .800 [20.32] .700 [17.78] 1-102241-4
Keying Plugs 17 1.700 [43.18] .800 [20.32] .800 [20.32] 1-102241-5
18 1.800 [45.72] .900 [22.86] .800 [20.32] 1-102241-6
19 1.900 [48.26] .900 [22.86] .900 [22.86] 1-102241-7
20 2.000 [50.80] 1.000 [25.40] .900 [22.86] 1-102241-8
21 2.100 [53.34] 1.000 [25.40] 1.000 [25.40] 1-102241-9
22 2.200 [55.88] 1.100 [27.94] 1.000 [25.40] 2-102241-0
23 2.300 [58.42] 1.100 [27.94] 1.100 [27.94] 2-102241-1
24 2.400 [60.96] 1.200 [30.48] 1.100 [27.94] 2-102241-2
Part No. 86286-1
(Plugs into standard or intermediate 25 2.500 [63.50] 1.200 [30.48] 1.200 [30.48] 2-102241-3
pressure receptacle contact) 26 2.600 [66.04] 1.300 [33.02] 1.200 [30.48] 2-102241-4
27 2.700 [68.58] 1.300 [33.02] 1.300 [33.02] 2-102241-5
Material Natural color nylon 28 2.800 [71.12] 1.400 [35.56] 1.300 [33.02] 2-102241-6
29 2.900 [73.66] 1.400 [35.56] 1.400 [35.56] 2-102241-7
30 3.000 [76.20] 1.500 [38.10] 1.400 [35.56] 2-102241-8
31 3.100 [78.74] 1.500 [38.10] 1.500 [38.10] 2-102241-9
32 3.200 [81.28] 1.600 [40.64] 1.500 [38.10] 3-102241-0
33 3.300 [83.82] 1.600 [40.64] 1.600 [40.64] 3-102241-1
34 3.400 [86.36] 1.700 [43.18] 1.600 [40.64] 3-102242-2
35 3.500 [88.90] 1.700 [43.18] 1.700 [43.18] 3-102241-3
36 3.600 [91.44] 1.800 [45.72] 1.700 [43.18] 3-102241-4
*No marking on housing.
Note: Contact Extraction/Lance Reset Tool No. 843996-3.
Part No. 87077-2
(Plugs directly into housing)
Note: All part numbers are RoHS compliant.
215
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Mod IV Wire-Applied Housings, Double-Row,


.100 x .100 [2.54 x 2.54] Centerline

Non-Polarized

.175
[4.45]

.100 Typ.
.050 [2.54]
Material [1.27] B .240
R
Typ. [6.10] C
X .100 Optional
Black thermoplastic, flame retardant
[2.54]

Related Product Data


Contacts pages 211-213 X
Section X-X .072
.070
Mateable Headers and Posts [1.78]
[1.83]
pages 96-99, 104, 105, 117-120

No. Part Nos.


Technical Documents of Dimensions C = .600 [15.24] C = .645 [16.38]
Mod IV Wire-Applied Housings

pages 277, 278 Pos. A B Stamped* Unstamped** Unstamped**


Product Specification 2 .100 [2.54] 5-87456-3
108-25007, 108-25019, 108-25020, 4 .200 [5.08] .100 [2.54] 5-87456-0 4-87456-9 2-86177-5
108-25021 6 .300 [7.62] .200 [5.08] 87456-2 87456-1 1-86177-8
Application Specification 8 .400 [10.16] .300 [7.62] 87456-4 87456-3 2-86177-0
114-25003, 114-25016 10 .500 [12.70] .400 [10.16] 87456-6 87456-5 1-86177-2
12 .600 [15.24] .500 [12.70] 87456-8 87456-7 1-86177-3
14 .700 [17.78] .600 [15.24] 1-87456-0 87456-9 1-86177-4
16 .800 [20.32] .700 [17.78] 1-87456-2 1-87456-1 1-86177-5
18 .900 [22.86] .800 [20.32] 1-87456-4 1-87456-3 1-86177-6
20 1.000 [25.40] .900 [22.86] 1-87456-6 1-87456-5 86177-1

5 Keying Plugs
22
24
26
28
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]

2-87456-0
2-87456-2
2-87456-4
1-87456-7
1-87456-9
2-87456-1
2-87456-3
86177-2
86177-3
86177-4
86177-5
30 1.500 [38.10] 1.400 [35.56] 2-87456-6 2-87456-5 86177-6
32 1.600 [40.64] 1.500 [38.10] 2-87456-8 2-87456-7 86177-7
34 1.700 [43.18] 1.600 [40.64] 3-87456-0 2-87456-9 86177-8
36 1.800 [45.72] 1.700 [43.18] 3-87456-2 3-87456-1 86177-9
38 1.900 [48.26] 1.800 [45.72] 3-87456-3 1-86177-0
40 2.000 [50.80] 1.900 [48.26] 3-87456-6 3-87456-5 1-86177-1
Part No. 86286-1 42 2.100 [53.34] 2.000 [50.80] 4-87456-4 4-87456-3
(Plugs into standard or intermediate
44 2.200 [55.88] 2.100 [53.34] 3-87456-8 3-87456-7 1-86177-7
pressure receptacle contact)
48 2.400 [60.96] 2.300 [58.42] 6-87456-0 5-87456-9 2-86177-3
Material Natural color nylon 50 2.500 [63.50] 2.400 [60.96] 4-87456-0 3-87456-9 2-86177-1
52 2.600 [66.04] 2.500 [63.50] 4-87456-2 4-87456-1 1-86177-9
54 2.700 [68.58] 2.600 [66.04] 4-87456-5
56 2.800 [71.12] 2.700 [68.58] 6-87456-1
58 2.900 [73.66] 2.800 [71.12] 6-87456-3
60 3.000 [76.20] 2.900 [73.66] 5-87456-2 5-87456-1
64 3.200 [81.28] 3.100 [78.74] 6-87456-6 6-87456-5
66 3.300 [83.82] 3.200 [81.28] 5-87456-4 5-87456-7
70 3.500 [88.90] 3.400 [86.36] 5-87456-5 2-86177-4
72 3.600 [91.44] 3.500 [88.90] 4-87456-8 4-87456-7
**Cavity identification, part number and date code stamped on housing where size permits.
Part No. 87077-1 **No marking on housing.
(for .645 high housings) Notes: 1. Strain reliefs are available and may be purchased separately. Consult TE.
Part No. 87077-2 Notes: 2. Contact Extraction/Lance Reset Tool No. 843996-3.
(for .600 high housings)
(Plugs directly into housing)
Note: All part numbers are RoHS compliant.
216
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Mod IV Wire-Applied Housings, Double-Row,


.100 x .100 [2.54 x 2.54] Centerline (Continued)
Strain Relief Locators
Polarized (on Housings 20 Positions
and Larger)

.175
[4.45]

Material
Black thermoplastic, flame retardant A
.050
.003
B [0.08] C .003 [1.27]
[0.08]
Related Product Data .100
Typ. .600
.100 [15.24]
[2.54] R
Contacts pages 211-213 [2.54]
Typ.
X .070 Typ. Optional
Typ.
[1.78]
Mateable Headers and Posts
pages 117-131 .240
[6.10]

Technical Documents .100


[2.54]

Mod IV Wire-Applied Housings


pages 277, 278 Section X-X
X
Product Specification
108-25007, 108-25019, 108-25020, No. of Dimensions Part Nos.
108-25021 Pos. A B C Stamped* Unstamped**
Application Specification 6 .300 [7.62] .100 [2.54] .100 [2.54] 87977-1 2-87977-8
114-25003, 114-25016 8 .400 [10.16] .200 [5.08] .100 [2.54] 87977-2 2-87977-9
10 .500 [12.70] .200 [5.08] .200 [5.08] 87977-3 3-87977-0
12 .600 [15.24] .300 [7.62] .200 [5.08] 87977-4 3-87977-1
14 .700 [17.78] .300 [7.62] .300 [7.62] 87977-5 3-87977-2
16 .800 [20.32] .400 [10.16] .300 [7.62] 87977-6 3-87977-3
18 .900 [22.86] .400 [10.16] .400 [10.16] 3-87977-4
20
22
24
26
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
.500 [12.70]
.500 [12.70]
.600 [15.24]
.600 [15.24]
.400 [10.16]
.500 [12.70]
.500 [12.70]
.600 [15.24]
87977-8

1-87977-0
1-87977-1
3-87977-5
3-87977-6
3-87977-7
3-87977-8
5
28 1.400 [35.56] .700 [17.78] .600 [15.24] 3-87977-9
Keying Plugs 30 1.500 [38.10] .700 [17.78] .700 [17.78] 4-87977-0
32 1.600 [40.64] .800 [20.32] .700 [17.78] 4-87977-1
34 1.700 [43.18] .800 [20.32] .800 [20.32] 4-87977-2
36 1.800 [45.72] .900 [22.86] .800 [20.32] 4-87977-3
38 1.900 [48.26] .900 [22.86] .900 [22.86] 4-87977-4
40 2.000 [50.80] 1.000 [25.40] .900 [22.86] 1-87977-8 4-87977-5
42 2.100 [53.34] 1.000 [25.40] 1.000 [25.40] 4-87977-6
Part No. 86286-1 44 2.200 [55.88] 1.100 [27.94] 1.000 [25.40] 4-87977-7
(Plugs into standard or intermediate 48 2.400 [60.96] 1.200 [30.48] 1.100 [27.94] 5-87977-6
pressure receptacle contact) 50 2.500 [63.50] 1.200 [30.48] 1.200 [30.48] 2-87977-1 4-87977-8
52 2.600 [66.04] 1.300 [33.02] 1.200 [30.48] 4-87977-9
Material Natural color nylon
54 2.700 [68.58] 1.300 [33.02] 1.300 [33.02] 5-87977-0
56 2.800 [71.12] 1.400 [35.56] 1.300 [33.02] 5-87977-8
58 2.900 [73.66] 1.400 [35.56] 1.400 [35.56] 6-87977-0
60 3.000 [76.20] 1.500 [38.10] 1.400 [35.56] 2-87977-4 5-87977-1
64 3.200 [81.28] 1.600 [40.64] 1.500 [38.10] 6-87977-2
66 3.300 [83.82] 1.600 [40.64] 1.600 [40.64] 5-87977-2
70 3.500 [88.90] 1.700 [43.18] 1.700 [43.18] 5-87977-3
72 3.600 [91.44] 1.800 [45.72] 1.700 [43.18] 5-87977-4
**Cavity identification, part number and date code stamped on housing where size permits.
**No marking on housing or strain relief.
Notes: 1. Strain reliefs are available and may be purchased separately. Consult TE.
Part No. 87077-2 Notes: 2. Contact Extraction/Lance Reset Tool No. 843996-3.
(Plugs directly into housing)
Note: All part numbers are RoHS compliant.
217
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Mod IV Wire-Applied Housings, Double-Row,


.100 x .100 [2.54 x 2.54] Centerline (Continued)
Polarized (with Detent Strain Relief Locators
(on Housings 20 Positions
Latching, with and without and Larger)
Strain Relief/Pull Tab)

.175
[4.45]

A
Material
B .003 C .003
Black thermoplastic, flame retardant [0.08] [0.08]
.100 .050
Typ.
[2.54] [1.27]
.100 .600
Typ. Typ.
[2.54] X [15.24]
Related Product Data
Contacts pages 211-213
Mateable Headers and Posts .240
[6.10]
pages 117-125, 127-133 .070
[1.78]
.100
Mod IV Wire-Applied Housings

Typ.
[2.54]
Technical Documents X Section X-X R
Optional
pages 277, 278 .500 1.000
[12.70] [25.40]
Product Specification
108-25007, 108-25019, 108-25020,
108-25021
.095 1.900
Application Specification [2.41] 1.150 [48.26]
114-25003, 114-25016 Dia. [29.21] .095
[2.41]
Dia.

5
Housing with Housing with
Strain Relief/Pull Tab Strain Relief/Pull Tab
Keying Plugs Strain Relief Part No. 87921-1 Strain Relief Part No. 87710-1
(10 thru 18 positions) (20 positions and larger)

Part No. 86286-1 Part Nos.


(Plugs into standard or intermediate No. of Dimensions No. of Without Strain Relief With Strain Relief
pressure receptacle contact) Pos. A B C Detents
Stamped* Unstamped** Stamped*
Material Natural color nylon 6 .300 [7.62] .100 [2.54] .100 [2.54] 1 87631-2 87631-1
8 .400 [10.16] .200 [5.08] .100 [2.54] 1 87631-4 87631-3
10 .500 [12.70] .200 [5.08] .200 [5.08] 1 87631-6 87631-5 87922-1
12 .600 [15.24] .300 [7.62] .200 [5.08] 1 87631-8 87631-7 87922-2
14 .700 [17.78] .300 [7.62] .300 [7.62] 1 1-87631-0 87631-9 87922-3
16 .800 [20.32] .400 [10.16] .300 [7.62] 1 1-87631-2 1-87631-1 87922-4
**Cavity identification, part number and date code stamped on housing and/or strain relief where size permits.
**No marking on housing or strain relief.
Notes: 1. The Strain Relief/Pull Tab can be bonded to any thermoplastic connector housing.
Notes: 2. Strain reliefs may be purchased separately.
Notes: 3. Contact Extraction/Lance Reset Tool No. 843996-3.

Part No. 87077-2


(Plugs directly into housing) Note: All part numbers are RoHS compliant.
218
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Mod IV Wire-Applied Housings, Double-Row,


.100 x .100 [2.54 x 2.54] Centerline (Continued)

Part Nos.
No. of Dimensions No. of Without Strain Relief With Strain Relief
Pos. A B C Detents
Stamped* Unstamped** Stamped*
18 .900 [22.86] .400 [10.16] .400 [10.16] 1 1-87631-4 1-87631-3 87922-5
20 1.000 [25.40] .500 [12.70] .400 [10.16] 2 1-87631-6 1-87631-5 87733-1
22 1.100 [27.94] .500 [12.70] .500 [12.70] 2 1-87631-8 1-87631-7
24 1.200 [30.48] .600 [15.24] .500 [12.70] 2 2-87631-0 1-87631-9 87733-3
26 1.300 [33.02] .600 [15.24] .600 [15.24] 2 2-87631-2 2-87631-1 87733-4
28 1.400 [35.56] .700 [17.78] .600 [15.24] 2 2-87631-4 2-87631-3
30 1.500 [38.10] .700 [17.78] .700 [17.78] 2 2-87631-6 2-87631-5 87733-6
32 1.600 [40.64] .800 [20.32] .700 [17.78] 2 2-87631-8 2-87631-7 87733-7
34 1.700 [43.18] .800 [20.32] .800 [20.32] 2 3-87631-0 2-87631-9 87733-8
36 1.800 [45.72] .900 [22.86] .800 [20.32] 2 3-87631-2 3-87631-1
38 1.900 [48.26] .900 [22.86] .900 [22.86] 2 3-87631-3
40 2.000 [50.80] 1.000 [25.40] .900 [22.86] 2 3-87631-6 3-87631-5 1-87733-1
42 2.100 [53.34] 1.000 [25.40] 1.000 [25.40] 2 3-87631-8 3-87631-7
44 2.200 [55.88] 1.100 [27.94] 1.000 [25.40] 2 4-87631-0 3-87631-9
48 2.400 [60.96] 1.200 [30.48] 1.100 [27.94] 2 5-87631-9
50 2.500 [63.50] 1.200 [30.48] 1.200 [30.48] 2 4-87631-2 4-87631-1 1-87733-4
52 2.600 [66.04] 1.300 [33.02] 1.200 [30.48] 2 4-87631-3
54 2.700 [68.58] 1.300 [33.02] 1.300 [33.02] 2 4-87631-6 4-87631-5
58 2.900 [73.66] 1.400 [35.56] 1.400 [35.56] 2 6-87631-3

Mod IV Wire-Applied Housings


60 3.000 [76.20] 1.500 [38.10] 1.400 [35.56] 2 5-87631-2 5-87631-1 1-87733-7
64 3.200 [81.28] 1.600 [40.64] 1.500 [38.10] 2 6-87631-6 6-87631-5
66 3.300 [83.82] 1.600 [40.64] 1.600 [40.64] 2 5-87631-3
70 3.500 [88.90] 1.700 [43.18] 1.700 [43.18] 2 5-87631-5
72 3.800 [96.52] 1.800 [45.72] 1.700 [43.18] 2 5-87631-8 5-87631-7
**Cavity identification, part number and date code stamped on housing and/or strain relief where size permits.
**No marking on housing or strain relief.
Notes: 1. The Strain Relief/Pull Tab can be bonded to any thermoplastic connector housing.
Notes: 2. Strain reliefs may be purchased separately.
Notes: 3. Contact Extraction/Lance Reset Tool No. 843996-3.

Note: All part numbers are RoHS compliant.


219
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Mod IV Wire-Applied Housings, Double-Row,


.100 x .100 [2.54 x 2.54] Centerline (Continued)

Center Polarized Position No. 1 Indicator

.030
[0.76]
.150
[3.81]
.570
[14.88]

.130 .130
[3.30] [3.30]
B
A
Material
Black thermoplastic, flame retardant

Related Product Data


.120 C
Contacts pages 211-213 [3.05] .600 .072
[15.24] [1.83]
Mateable Headers and Posts X
AMP-LATCH Low Profile Headers, .285
.227
Shrouded pages 135-140 [5.77] [7.24]

X
Mod IV Wire-Applied Housings

.100 R Optional
Technical Documents [2.54]
pages 277, 278 Section X-X

Product Specification
108-25007, 108-25019, 108-25020,
108-25021
Application Specification
No. of Dimensions Part Nos.
114-25003, 114-25016 Pos. A B C (Stamped*)
8 .580 [14.73] .225 [5.72] .300 [7.62] 1-102387-4
10 .680 [17.27] .275 [6.98] .400 [10.16] 102387-1
14 .880 [22.35] .375 [9.53] .600 [15.24] 102387-2
16 .980 [24.89] .425 [10.80] .700 [17.78] 102387-3

5 20
22
24
26
1.180 [29.97]
1.280 [32.51]
1.380 [35.05]
1.480 [37.59]
.525 [13.34]
.575 [14.61]
.625 [15.88]
.675 [17.15]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
102387-4
1-102387-5
102387-5
102387-6
30 1.680 [42.67] .775 [19.69] 1.400 [35.56] 102387-7
34 1.880 [47.75] .875 [22.23] 1.600 [40.64] 102387-8
Keying Plugs 40 2.180 [55.37] 1.025 [26.04] 1.900 [48.26] 102387-9
44 2.380 [60.45] 1.125 [28.58] 2.100 [53.34] 1-102387-3
50 2.680 [68.07] 1.275 [32.39] 2.400 [60.96] 1-102387-0
60 3.180 [80.77] 1.525 [38.74] 2.900 [73.66] 1-102387-1
64 3.380 [85.85] 1.625 [41.28] 3.100 [78.74] 1-102387-2
*Cavity identification and TE stamped on housing.
Non-functional slot is used for gating purposes during injection molding process. This gating feature is not inherent in
all production molds. Therefore, the depicted slot will only be present on housings produced on mold tooling requiring
Part No. 86286-1 this gating feature.
(Plugs into standard or intermediate Note: Contact Extraction/Lance Reset Tool No. 843996-3.
pressure receptacle contact)

Material Natural color nylon

Part No. 87077-2


(Plugs directly into housing) Note: All part numbers are RoHS compliant.
220
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Short Point, Crimp Snap-In Wire-Applied Contacts and Housings

Product Facts
Short point of contact
mates with .169 [4.29]
to .259 [6.58] long post
Double-row housings are
end-to-end and side-to-side
stackable
Terminates 32-20 AWG
[0.03-0.6 mm2] discrete
wire
Contacts have insulation
support to accept a
maximum insulation
diameter of .060 [1.52]
Available with .000015
[0.00038] or .000030
[0.00076] gold duplex,
or tin plating
Mates with .025 [0.64]
square posts

Short Point, Crimp Snap-In Wire-


Dual cantilever contact

Applied Contacts and Housings


beams for reliable matings
Locking retention latch
provides approximately
104257-3 MTE Recept. Housing
3 lb [13.34 N] of retention
force
1-104480-4 Short Point Contact Wire-to-Board
5-104450-3 MTE Hdr
1-87232-0 Hdr
Unique locking latch design
helps prevent latch from
protruding through latch
window
Contacts snap into

5
104482-9 Short Point Recept. Housing
AMPMODU MTE single-row 5-104481-6 Short Point Contact
housings
Double-row housing
104257-5 MTE Recept. Housing
configurations include 1-104480-5 Short Point Contact
.100 [2.54] centerline,
plain and polarized 103688-9 MTE Recept. Housing
1-104479-1 Short Point Contact
Housing sizes range from
4 to 52 positions
Recognized under the AMPMODU Short Point Performance
Component Program receptacle contacts are Characteristics
of Underwriters designed to mate with .025
Laboratories Inc.,
R

[0.64] square posts. They Contact Current Rating


3 amperes
File No. E28476 will mate with posts as short
as .169 [4.29]. Termination Resistance
Certified by 12 milliohms (max.)
Canadian Standards R Short Point double-row Durability Ref. Product
Association, housings are end-to-end Specification 108-1472
File No. LR7189 and side-to-side stackable
Produced under a Quality on .100 [2.54] centers.
Management System Contacts also can be used
certified to ISO in single-row AMPMODU
MTE housings to provide
9001 ISO900e1d a complete wire-crimp
i
A copy of the rtif
Ce system, or to serve as
certificate is available
upon request
replacement contacts.

Note: All part numbers are RoHS compliant.


221
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Short Point Crimp Snap-In Receptacle Contacts


Material and Finish
.068
Copper alloy C7025, plated as follows: [1.73]
Plating A Duplex plated .000030
[0.00076] min. gold on contact area,
.000050 [0.00127] min. tin in crimp
area, with entire contact underplated
.000050 [0.00127] min. nickel
Plating B Duplex plated .000015
[0.00038] min. gold on contact area,
.000050 [0.00127] min. tin in crimp
area, with entire contact underplated
.000050 [0.00127] min. nickel
Plating C .000100 [0.00254] min.
tin over .000050 [0.00127] min. nickel
on entire contact .060
.460 [1.52]
[11.68]

Related Product Data


Performance Characteristics
page 221
Housings used in C C
Short Pointpages 223, 224
AMPMODU MTE Unloaded
Housings pages 228-233
Application Tooling
page 270-272
Short Point Contacts

.012
[0.30]
Technical Documents Gap
pages 276-278
Product Specification
108-1472
Application Specification
114-25038 Section C - C

5
Keying Plug
Part No. 104072-1
Ten plugs are supplied per strip.
Order quantity reflects the number Extraction/Lance Reset
of strips required. Tool No. 843477-1

Wire Size Quick-Change Applicator for


Ins. Contact Part No. Applicator for Hand
Range Dia. (Standard Pressure) AMP-O-MATIC Tool
Finish AMP-O-LECTRIC Stripper/Crimper
AWG [mm2] Range Strip Form Loose Piece Nos.
Machine* Machine
Plating A 1-104481-1 1-104481-3
32-28 0.03-0.08 .025-.060 [0.64-1.52] Plating B 1-104481-0 1-104481-2 567296-2 466980-1 91518-1
Plating C 5-104481-2 5-104481-6
Plating A 1-104480-3 1-104480-6
.
26-22 0.13-0.3 .025-.060 [0.64-1.52] Plating B 1-104480-2 1-104480-5 567297-2 466981-1 91518-1
Plating C 1-104480-7 1-104480-4
Plating A 1-104479-0 1-104479-3
.
24-20 0.2-0.5 .025-.060 [0.64-1.52] Plating B 104479-9 1-104479-2 567298-2 466982-1 91551-1
Plating C 104479-8 1-104479-1
*For use with Model K machines. Call the Tooling/Technical Assistance Center (1-800-722-1111) for part nos. of applicators for use with the Model G
machines (shown on page 288), as well as other bench machines and fully automatic AMPOMATOR lead making machines.

Note: All part numbers are RoHS compliant.


222
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Short Point Wire-Applied Housings, Double-Row, Non-Polarized,


.100 x .100 [2.54 x 2.54] Centerline

Material
Black thermoplastic, flame retardant,
94V-0 rated

B .036 .600
Related Product Data .049 .049 [0.91] [15.24]
[1.24] X [1.24] 2 Plc.
Performance Characteristics
page 221 .198
[5.03]
Contacts page 222
0.72
Mateable Headers .100
Typ. X [1.83]
.100 [2.54]
pages 104, 105 Section X-X
[2.54]

Technical Documents

Wire-Applied Housings
pages 276-278

Short Point
Product Specification
108-1472
Application Specification Dimensions
No. of Housing
114-25038 Pos. Part No.
A B
4 .198 [5.03] .100 [2.54] 104482-1
6 .298 [7.57] .200 [5.08] 104482-2
8 .398 [10.11] .300 [7.62] 104482-3
10 .498 [12.65] .400 [10.16] 104482-4
12
14
16
18
.598 [15.19]
.698 [17.73]
.798 [20.27]
.898 [22.81]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
104482-5
104482-6
104482-7
104482-8
5
20 .998 [25.35] .900 [22.86] 104482-9
22 1.098 [27.89] 1.000 [25.40] 1-104482-0
26 1.298 [32.97] 1.200 [30.48] 1-104482-1
28 1.398 [35.51] 1.300 [33.02] 1-104482-2
30 1.498 [38.05] 1.400 [35.56] 1-104482-3
32 1.598 [40.59] 1.500 [38.10] 1-104482-4
34 1.698 [43.13] 1.600 [40.64] 1-104482-5
36 1.798 [45.67] 1.700 [43.18] 1-104482-6
38 1.898 [48.21] 1.800 [45.72] 1-104482-7
40 1.998 [50.75] 1.900 [48.26] 1-104482-8
44 2.198 [55.83] 2.100 [53.34] 1-104482-9
52 2.598 [65.99] 2.500 [63.50] 2-104482-0

Note: All part numbers are RoHS compliant.


223
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Short Point Wire-Applied Housings, Double-Row, Polarized, .100 x .100


[2.54 x 2.54] Centerline

Material
Black thermoplastic, flame retardant, .600
[15.24]
94V-0 rated .100
.100 [2.54] .095
.049 [2.54] [2.41]
[1.24] .049
Related Product Data
X [1.24] 2 Plc. .036
[0.91]
Performance Characteristics .198
[5.03]
page 221 0.72
Contacts page 222 .100 .100 X [1.83]
Typ. Section X-X
[2.54]
Mateable Headers [2.54]
B
pages 104, 105, 135-138
Wire-Applied Housings

Technical Documents
pages 276-278
Short Point

Product Specification
108-1472
Application Specification No.of Dimensions Housing
114-25038 Pos. A B Part No.
8 .398 [10.11] .300 [7.62] 104483-1
10 .498 [12.65] .400 [10.16] 1-104483-1
12 .598 [15.19] .500 [12.70] 1-104483-2
14 .698 [17.73] .600 [15.24] 104483-9

5 18
20
26
30
.898 [22.81]
.998 [25.35]
1.298 [32.97]
1.498 [38.05]
.800 [20.32]
.900 [22.86]
1.200 [30.48]
1.400 [35.56]
104483-2
104483-3
104483-4
104483-5
38 1.898 [48.21] 1.800 [45.72] 104483-6
50 2.498 [63.45] 2.400 [60.96] 1-104483-3
52 2.598 [65.99] 2.500 [63.50] 1-104483-0
54 2.698 [68.53] 2.600 [66.04] 104483-7
64 3.198 [81.23] 3.100 [78.74] 104483-8
Note: Other sizes can be made available on request.

Note: All part numbers are RoHS compliant.


224
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

MTE Interconnection System

Product Facts
Receptacle assemblies mate
with .025 [0.64] sq. posts;
mating post length is .200
[5.08] min., .250 [6.35] max.
Proven AMPMODU receptacle
contact design; dual
cantilever beams, built-in
anti-overstress, completely
enclosed box design,
standard or high-pressure
Insulation displacement
technology
Two contact sizes for
terminating 30-22 AWG [0.05-
0.3 mm2] wire range; .054
[1.37] max. insulation diam-
eter with an insulation wall
thickness of .015 [0.38] max.
Choice of gold duplex or tin
plated contacts
Interchangeable crimp

MTE Interconnection System


snap-in pin and receptacle
contacts available
Housing sizes 2 through
25 positions, single-row .100
[2.54] centers
Plain housings are end-to-end
and/or back-to-back stackable
for open pin field applications The AMPMODU MTE standard or high-pressure, Performance
Interconnection System features dual cantilever Specifications
Optional header with
offers both wire-to-board beams in an enclosed
swaged tail feature helps Electrical Characteristics

5
prevent movement prior to and wire-to-wire connectors box. The post stop helps
using .025 [0.64] sq. post prevent a mating post from Contact Current Rating
flow soldering 3 amperes for single contact in free air
technology. disturbing the wire
Integral latch provides termination and also limits (Amperage could vary due to ambient
positive retention between The AMPMODU MTE temperature, wire size and duty cycles.)
Interconnection System the mating depth of a long
header and receptacle post to protect a wrap-type Contact Termination
housing consists of single-row Resistance 15 milliohms (max.)
housings with contacts termination at the base of
Coupling shrouds permit the post. The forward Dielectric Withstanding Voltage
preloaded on .100 [2.54] At Sea Level600 VAC, rms
ganging of smaller connectors centers. Housings are contact stop helps prevent
At 70,000 Ft. [21 336 m]225 VAC, rms
with guide ribs to form larger furnished with contacts contact overinsertion prior
Insulation Resistance
single- or double-row partially inserted, leaving to termination. All contacts
5,000 megohms (min.)
latching connectors the termination areas are furnished on carrier
Mass terminating tooling exposed. Final contact strips which are interlocked
provides lowest applied cost insertion can be for stability and positive Environmental Characteristics
for most production needs accomplished automatically location during termination. Operating Temperature
SMT and SMT compatible, with TE application Single-row housings are -65C to +105C
high-temp headers available equipment, and manually available in sizes 2 through Vibration 15 Gs (gold), 10 Gs (tin)
when terminated with the TE 25 positions. Included are Physical Shock 50 Gs
Recognized under the pistol grip hand tool. three styles of receptacle Industrial Mixed Flow Gasing
Component Program of housingsplain, polarized/
The heart of the system is Class 1 (20 days) (gold)
Underwriters latching and ribbed and two
Laboratories Inc., the insulation displacement Product Specification
R

contact design, featured in styles of pin housings, 108-25034


File No. E28476
both pin and receptacle shrouded with polarizing/ Application Specification
Certified by Canadian latching feature and ribbed. 114-25026
contacts. The receptacle
Standards
contact, available in either
Association, R

File No. LR7189

225
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

MTE Interconnection System (Continued)

Wire-to-Board

High-Temp Headers,
Polarized/Latching, Straight
Receptacle Assemblies and Right Angle Post,
with Guide Ribs Receptacle Assemblies with or without Holddown
(See pages 232 & 233) Polarized/Latching (See pages 249 & 250)
2

(See pages 230 & 231)

Double-Row Coupling
Shroud (See page 241)
Receptacle
Assemblies,
Polarized/Latching (See
pages 230 & 231)

AMPMODU Shrouded Headers,


Headers, Double-Row, Polarized/Latching,
Straight or Right Angle Straight Post, with or
Post1 (See pages without Swaged Tail
119-121, 124, 125, 127, (See pages 244 & 245)
2

128, 131-133 & 149)

Headers,
Polarized/Latching,
Right Angle Post, with
or without Holddown Receptacle Assemblies Plain
(See pages 246 & 247) (See pages 228 and 229)
MTE Interconnection System

High Pressure Receptacle Assemblies,


Plain (See page 234)
Receptacle Assemblies
with Guide Ribs
(See pages 232 & 233)

AMPMODU Breakaway Headers,


Receptacle Contact, Single- or Double-Row, Straight
Insulation Displacement or RightAngle Post, with or
(Used in all without Board Retention Feature
Receptacle Assemblies) Single-Row Coupling

5
(See pages 102-105)
Shroud (See page 240)

Mating AMPMODU Double-Row Shrouded Header Assemblies must have .318 [8.08] mating post length and .150 [3.81] dimension from centerline of last
1

post to inside of end shroud wall.


1

Surface Mount Right-Angle and Vertical Headers are also available (see pages 251 and 252)
2

226
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

MTE Interconnection System (Continued)

Wire-to-Wire

Pin Assemblies, Shrouded


Polarized/Latching
(See pages 236 & 237)

Receptacle Assemblies,
Polarized/Latching
(See pages 230 & 231)

Receptacle Contact,
Insulation Displacement Pin Contact,
(Used in all Insulation
Receptacle Assemblies) Displacement
(Used in all Pin
Assemblies)

Pin Assemblies
with Guide Ribs (See
pages 238 & 239)

Panel Mount
Pin Shroud
(See page 242)
Receptacle Assemblies Single-Row

MTE Interconnection System


Crimp Snap-In
Receptacle Contact with Guide Ribs Coupling
(See pages 232 & 233) Shroud (See Crimp Snap-In Pin
(Used with Unloaded Contact (Used with
Housings page 240) Unloaded Housings
See page 253) See page 254)
Note: For wire-to-wire applications shown above, all pin and receptacle assembly combinations are intermateable.

227
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

MTE Receptacle AssembliesPlain, Single-Row, .100 [2.54] Centerline

Receptacle Contacts
(See Note 1)

.520
[13.21]

Preassembled housings in strip 1.120


form are available in positions [28.45]
2 thru 12. For ease of handling,
positions 2 thru 5 are recom- .600
mended when using the [15.24]
TE Manual Pistol Grip Tool.

Material and Finish


Housing Black thermoplastic, B
94V-0 rated Typ.
Contacts Phosphor Bronze, A
plated as follows: Position No. 1 Indicator
Plating A Duplex plated .000030 (Farside)
[0.00076] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
.100
entire contact underplated .000050
MTE Receptacle Assemblies

[2.54] Typ.
[0.00127] nickel
Plating B Duplex plated .000015
[0.00038] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050 .098
[0.00127] nickel [2.49]

Plating C .000100 [0.00254] tin


over .000050 [0.00127] nickel on entire
contact
Note: Insulation displacement contacts
accept an insulation diameter of .030 [0.76]

5 min. to .054 [1.37] max. with an insula-


tion wall thickness of .015 [0.38] max.
Mating post length for preloaded housings
is .200 [5.08] min., .250 [6.35] max.

Related Product Data


Mateable AMPMODU Products
Breakaway Headers pages 102-
110 (with .230 mating length)
Reeled Breakaway Headers
pages 106, 107 (with .230 mating
length)
Machine Applied Bandolier
Posts page 163
Single-Row Shrouded Headers
with .066 [1.68] End Dimension
pages 115, 116
Interchangeable Crimp Contacts
(Short Point) page 253
Application Tooling page 273
Performance Specifications
page 225

Technical Documents
pages 277, 278 These receptacle assemblies
with plain housings can be
Product Specification stacked end-to-end and/or side-
108-25034 to-side for single or double-row
Application Specification connections to an open pin field
114-25026 with a .100 [2.54] centerline grid.

228
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

MTE Receptacle AssembliesStrip Form Plain,


Single-Row, .100 [2.54] Centerline (Continued)

Housing Strip Form Receptacle Assembly Strip Form Receptacle Assembly


No. of Dimensions Quantities 30-26 AWG [0.05-0.15mm2] Wire 26-22 AWG [0.12-0.3mm2] Wire Unloaded
Pos. A B Per Strip Housings
Segment Plating A Plating B Plating C Plating A Plating B Plating C
2 2.000 [50.80] .198 [5.03] 10 5-103979-1 5-103978-1 5-103977-1 5-103976-1 5-103975-1 5-103974-1 103688-1
3 2.400 [60.96] .298 [7.57] 8 5-103979-2 5-103978-2 5-103977-2 5-103976-2 5-103975-2 5-103974-2 103688-2
4 1.990 [50.55] .398 [10.11] 5 5-103979-3 5-103978-3 5-103977-3 5-103976-3 5-103975-3 5-103974-3 103688-3
5 1.990 [50.55] .498 [12.65] 4 5-103979-4 5-103978-4 5-103977-4 5-103976-4 5-103975-4 5-103974-4 103688-4
6 2.390 [60.71] .598 [15.19] 4 5-103979-5 5-103978-5 5-103977-5 5-103976-5 5-103975-5 5-103974-5 103688-5
7 1.400 [35.56] .698 [17.73] 2 5-103979-6 5-103978-6 5-103977-6 5-103976-6 5-103975-6 5-103974-6 103688-6
8 1.600 [40.64] .798 [20.27] 2 5-103979-7 5-103978-7 5-103977-7 5-103976-7 5-103975-7 5-103974-7 103688-7
9 1.800 [45.72] .898 [22.81] 2 5-103979-8 5-103978-8 5-103977-8 5-103976-8 5-103975-8 5-103974-8 103688-8
10 2.000 [50.80] .998 [23.35] 2 5-103979-9 5-103978-9 5-103977-9 5-103976-9 5-103975-9 5-103974-9 103688-9
11 2.200 [55.88] 1.098 [27.89] 2 6-103979-0 6-103978-0 6-103977-0 6-103976-0 6-103975-0 6-103974-0 1-103688-0
12 2.400 [60.96] 1.198 [30.43] 2 6-103979-1 6-103978-1 6-103977-1 6-103976-1 6-103975-1 6-103974-1 1-103688-1

MTE Receptacle Assemblies


MTE Receptacle AssembliesIndividual Form Plain,
Single-Row, .100 [2.54] Centerline

Individual Receptacle Assembly Individual Receptacle Assembly


No. of Dimensions 30-26 AWG [0.05-0.15mm2] Wire 26-22 AWG [0.12-0.3mm2] Wire Unloaded
Pos. B Housings
Plating A Plating B Plating C Plating A Plating B Plating C
13 1.298 [32.96] 6-103903-2 6-103684-2 6-103685-2 6-103902-2 6-103686-2 6-103687-2 1-103688-2
14
15
16
17
1.398 [35.51]
1.498 [38.05]
1.598 [40.59]
1.698 [43.13]
6-103903-3
6-103903-4
6-103903-5
6-103903-6
6-103684-3
6-103684-4
6-103684-5
6-103684-6
6-103685-3
6-103685-4
6-103685-5
6-103685-6
6-103902-3
6-103902-4
6-103902-5
6-103902-6
6-103686-3
6-103686-4
6-103686-5
6-103686-6
6-103687-3
6-103687-4
6-103687-5
6-103687-6
1-103688-3
1-103688-4
1-103688-5
1-103688-6
5
18 1.798 [45.67] 6-103903-7 6-103684-7 6-103685-7 6-103902-7 6-103686-7 6-103687-7 1-103688-7
19 1.898 [48.20] 6-103903-8 6-103684-8 6-103685-8 6-103902-8 6-103686-8 6-103687-8 1-103688-8
20 1.998 [50.75] 6-103903-9 6-103684-9 6-103685-9 6-103902-9 6-103686-9 6-103687-9 1-103688-9
21 2.098 [53.29] 7-103903-0 7-103684-0 7-103685-0 7-103902-0 7-103686-0 7-103687-0 2-103688-0
22 2.198 [55.83] 7-103903-1 7-103684-1 7-103685-1 7-103902-1 7-103686-1 7-103687-1 2-103688-1
23 2.298 [58.37] 7-103903-2 7-103684-2 7-103685-2 7-103902-2 7-103686-2 7-103687-2 2-103688-2
24 2.398 [60.91] 7-103903-3 7-103684-3 7-103685-3 7-103902-3 7-103686-3 7-103687-3 2-103688-3
25 2.498 [63.45] 7-103903-4 7-103684-4 7-103685-4 7-103902-4 7-103686-4 7-103687-4 2-103688-4
Notes: 1. Receptacle assemblies are furnished with strip contacts partially inserted into housingcontacts latched into preload windows. Contacts are fully inserted into
housings automatically when terminated with TE application machines, or manually when terminated with TE pistol grip hand tool.
2. Use Extraction/Lance Reset Tool No. 843477-1 to remove receptacle contacts.
3. Keying plugs are available, see page 253.

Note: All part numbers are RoHS compliant.


229
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

MTE Receptacle AssembliesPolarized/Latching,


Single-Row, .100 [2.54] Centerline

Receptacle Contacts
(See Note 1)

.520
[13.21]

Preassembled housings in strip


form are available in positions 2 thru
12. For ease of handling, positions 1.120
2 thru 5 are recommended when [28.45]
using the TE Manual Pistol Grip
Tool.
.600
[15.24]

Material and Finish


Housing Black thermoplastic,
94V-0 rated B
Typ.
Contacts Phosphor Bronze, plated
A
as follows:
Plating A Duplex plated .000030 Position No. 1 Indicator
[0.00076] gold on contact area, .000050 (Farside)
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
MTE Receptacle Assemblies

[0.00127] nickel .100


[2.54] Typ.
Plating B Duplex plated .000015
[0.00038] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
.098
[0.00127] nickel [2.49]
Plating C .000100 [0.00254] tin
over .000050 [0.00127] nickel on entire
contact
Note: Insulation displacement contacts
accept an insulation diameter of .030 [0.76]

5 min. to .054 [1.37] max. with an insula-


tion wall thickness of .015 [0.38] max.
Mating post length for preloaded housings
is .200 [5.08] min., .250 [6.35] max.

Related Product Data


Mateable AMPMODU Products
Pin Assemblies (Polarized/
Latching) pages 236, 237
Pin Assemblies with Guide
Ribs (installed in Panel Mount
Pin Shroud) pages 238, 239, 242
Headers (Polarized/Latching)
pages 244-252
Interchangeable Crimp Contacts
(Short Point) page 253
Application Tooling page 273
Performance Specifications
page 225

Technical Documents
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026

230
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

MTE Receptacle AssembliesStrip Form Polarized/Latching,


Single-Row, .100 [2.54] Centerline (Continued)

Housing Strip Form Receptacle Assembly Strip Form Receptacle Assembly


No. of Dimensions Quantities 30-26 AWG [0.05-0.15mm2] Wire 26-22 AWG [0.12-0.3mm2] Wire Unloaded
Pos. A B Per Strip Housings
Segment Plating A Plating B Plating C Plating A Plating B Plating C
2 2.000 [50.80] .198 [5.03] 10 5-103961-1 5-103960-1 5-103959-1 5-103958-1 5-103957-1 5-103956-1 104257-1
3 2.400 [60.96] .298 [7.57] 8 5-103961-2 5-103960-2 5-103959-2 5-103958-2 5-103957-2 5-103956-2 104257-2
4 1.990 [50.55] .398 [10.11] 5 5-103961-3 5-103960-3 5-103959-3 5-103958-3 5-103957-3 5-103956-3 104257-3
5 1.990 [50.55] .498 [12.65] 4 5-103961-4 5-103960-4 5-103959-4 5-103958-4 5-103957-4 5-103956-4 104257-4
6 2.390 [60.71] .598 [15.19] 4 5-103961-5 5-103960-5 5-103959-5 5-103958-5 5-103957-5 5-103956-5 104257-5
7 1.400 [35.56] .698 [17.73] 2 5-103961-6 5-103960-6 5-103959-6 5-103958-6 5-103957-6 5-103956-6 104257-6
8 1.600 [40.64] .798 [20.27] 2 5-103961-7 5-103960-7 5-103959-7 5-103958-7 5-103957-7 5-103956-7 104257-7
9 1.800 [45.72] .898 [22.81] 2 5-103961-8 5-103960-8 5-103959-8 5-103958-8 5-103957-8 5-103956-8 104257-8
10 2.000 [50.80] .998 [23.35] 2 5-103961-9 5-103960-9 5-103959-9 5-103958-9 5-103957-9 5-103956-9 104257-9
11 2.200 [55.88] 1.098 [27.89] 2 6-103961-0 6-103960-0 6-103959-0 6-103958-0 6-103957-0 6-103956-0 1-104257-0
12 2.400 [60.96] 1.198 [30.43] 2 6-103961-1 6-103960-1 6-103959-1 6-103958-1 6-103957-1 6-103956-1 1-104257-1

MTE Receptacle Assemblies


MTE Receptacle AssembliesIndividual Form Polarized/Latching,
Single-Row, .100 [2.54] Centerline
Individual Receptacle Assembly Individual Receptacle Assembly
No. of Dimensions 30-26 AWG [0.05-0.15mm2] Wire 26-22 AWG [0.12-0.3mm2] Wire Unloaded
Pos. B Housings
Plating A Plating B Plating C Plating A Plating B Plating C
13 1.298 [32.96] 6-103897-2 6-103640-2 6-103641-2 6-103734-2 6-103644-2 6-103645-2 1-104257-2
14
15
16
17
1.398 [35.51]
1.498 [38.05]
1.598 [40.59]
1.698 [43.13]
6-103897-3
6-103897-4
6-103897-5
6-103897-6
6-103640-3
6-103640-4
6-103640-5
6-103640-6
6-103641-3
6-103641-4
6-103641-5
6-103641-6
6-103734-3
6-103734-4
6-103734-5
6-103734-6
6-103644-3
6-103644-4
6-103644-5
6-103644-6
6-103645-3
6-103645-4
6-103645-5
6-103645-6
1-104257-3
1-104257-4
1-104257-5
1-104257-6
5
18 1.798 [45.67] 6-103897-7 6-103640-7 6-103641-7 6-103734-7 6-103644-7 6-103645-7 1-104257-7
19 1.898 [48.20] 6-103897-8 6-103640-8 6-103641-8 6-103734-8 6-103644-8 6-103645-8 1-104257-8
20 1.998 [50.75] 6-103897-9 6-103640-9 6-103641-9 6-103734-9 6-103644-9 6-103645-9 1-104257-9
21 2.098 [53.29] 7-103897-0 7-103640-0 7-103641-0 7-103734-0 7-103644-0 7-103645-0 2-104257-0
22 2.198 [55.83] 7-103897-1 7-103640-1 7-103641-1 7-103734-1 7-103644-1 7-103645-1 2-104257-1
23 2.298 [58.37] 7-103897-2 7-103640-2 7-103641-2 7-103734-2 7-103644-2 7-103645-2 2-104257-2
24 2.398 [60.91] 7-103897-3 7-103640-3 7-103641-3 7-103734-3 7-103644-3 7-103645-3 2-104257-3
25 2.498 [63.45] 7-103897-4 7-103640-4 7-103641-4 7-103734-4 7-103644-4 7-103645-4 2-104257-4
Notes: 1. Receptacle assemblies are furnished with strip contacts partially inserted into housingcontacts latched into preload windows. Contacts are fully inserted into
housings automatically when terminated with TE application machines, or manually when terminated with TE pistol grip hand tool.
2. Use Extraction/Lance Reset Tool No. 843477-1 to remove receptacle contacts.
3. Keying plugs are available, see page 253.

Note: All part numbers are RoHS compliant.


231
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

MTE Receptacle AssembliesGuide Ribs,


Single-Row, .100 [2.54] Centerline

Receptacle Contacts
(See Note 1)

.520
[13.21]

Preassembled housings in strip


1.120
form are available in positions
[28.45]
2 thru 12. For ease of handling,
positions 2 thru 5 are recommended
when using the TE Manual Pistol .600
Grip Tool. [15.24]

Material and Finish


Housing Black thermoplastic,
94V-0 rated
B
Contacts Phosphor Bronze, Typ.
plated as follows:
A
Plating A Duplex plated .000030
[0.00076] gold on contact area, .000050 Position No. 1 Indicator
(Farside)
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
MTE Receptacle Assemblies

[0.00127] nickel
.100
Plating B Duplex plated .000015 [2.54] Typ
[0.00038] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
Plating C .000100 [0.00254] tin .098
over .000050 [0.00127] nickel on entire [2.49]
contact
Note: Insulation displacement contacts
accept an insulation diameter of .030 [0.76]

5 min. to .054 [1.37] max. with an insula-


tion wall thickness of .015 [0.38] max.
Mating post length for preloaded housings
is .200 [5.08] min., .250 [6.35] max.
Related Product Data
Coupling Shrouds used with
Single-Row page 240
Double-Row page 241
Mateable AMPMODU Products
(with Receptacle Assemblies
Installed in Single-Row Coupling
Shrouds)
Pin Assemblies (Polarized/
Latching) pages 236, 237
Pin Assemblies with Guide Ribs
(installed in Panel Mount Pin Interchangeable Crimp Contacts
Shroud) pages 238, 239, 242 (Short Point) page 253
Headers (Polarized/Latching) Application Tooling page 273
pages 244-252
Performance Specifications
Mateable AMPMODU Products page 225
(with Receptacle Assemblies
Installed in Double-Row Coupling Technical Documents
Shrouds) pages 277, 278
Headers, Shrouded, Double-Row Product Specification
(.318 [8.08] mating post length, 108-25034
.150 [3.81] end dimension)
Application Specification
pages 119-121, 124, 125, 128, 129,
114-25026
131-133

232
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

MTE Receptacle AssembliesStrip Form with Guide Ribs,


Single-Row, .100 [2.54] Centerline (Continued)

Housing Strip Form Receptacle Assembly Strip Form Receptacle Assembly


No. of Dimensions Quantities 30-26 AWG [0.05-0.15mm2] Wire 26-22 AWG [0.12-0.3mm2] Wire Unloaded
Pos. A B Per Strip Housings
Segment Plating A Plating B Plating C Plating A Plating B Plating C
2 2.000 [50.80] .198 [5.03] 10 5-103973-1 5-103972-1 5-103971-1 5-103970-1 5-103969-1 5-103968-1 103648-1
3 2.400 [60.96] .298 [7.57] 8 5-103973-2 5-103972-2 5-103971-2 5-103970-2 5-103969-2 5-103968-2 103648-2
4 1.990 [50.55] .398 [10.11] 5 5-103973-3 5-103972-3 5-103971-3 5-103970-3 5-103969-3 5-103968-3 103648-3
5 1.990 [50.55] .498 [12.65] 4 5-103973-4 5-103972-4 5-103971-4 5-103970-4 5-103969-4 5-103968-4 103648-4
6 2.390 [60.71] .598 [15.19] 4 5-103973-5 5-103972-5 5-103971-5 5-103970-5 5-103969-5 5-103968-5 103648-5
7 1.400 [35.56] .698 [17.73] 2 5-103973-6 5-103972-6 5-103971-6 5-103970-6 5-103969-6 5-103968-6 103648-6
8 1.600 [40.64] .798 [20.27] 2 5-103973-7 5-103972-7 5-103971-7 5-103970-7 5-103969-7 5-103968-7 103648-7
9 1.800 [45.72] .898 [22.81] 2 5-103973-8 5-103972-8 5-103971-8 5-103970-8 5-103969-8 5-103968-8 103648-8
10 2.000 [50.80] .998 [23.35] 2 5-103973-9 5-103972-9 5-103971-9 5-103970-9 5-103969-9 5-103968-9 103648-9
11 2.200 [55.88] 1.098 [27.89] 2 6-103973-0 6-103972-0 6-103971-0 6-103970-0 6-103969-0 6-103968-0 1-103648-0
12 2.400 [60.96] 1.198 [30.43] 2 6-103973-1 6-103972-1 6-103971-1 6-103970-1 6-103969-1 6-103968-1 1-103648-1

MTE Receptacle Assemblies


MTE Receptacle AssembliesIndividual Form with Guide Ribs,
Single-Row, .100 [2.54] Centerline

Individual Receptacle Assembly Individual Receptacle Assembly


No. of Dimensions 30-26 AWG [0.05-0.15mm2] Wire 26-22 AWG [0.12-0.3mm2] Wire Unloaded
Pos. B Housings
Plating A Plating B Plating C Plating A Plating B Plating C
13 1.298 [32.96] 6-103901-2 6-103649-2 6-103650-2 6-103900-2 6-103651-2 6-103652-2 1-103648-2
14
15
16
17
1.398 [35.51]
1.498 [38.05]
1.598 [40.59]
1.698 [43.13]
6-103901-3
6-103901-4
6-103901-5
6-103901-6
6-103649-3
6-103649-4
6-103649-5
6-103649-6
6-103650-3
6-103650-4
6-103650-5
6-103650-6
6-103900-3
6-103900-4
6-103900-5
6-103900-6
6-103651-3
6-103651-4
6-103651-5
6-103651-6
6-103652-3
6-103652-4
6-103652-5
6-103652-6
1-103648-3
1-103648-4
1-103648-5
1-103648-6
5
18 1.798 [45.67] 6-103901-7 6-103649-7 6-103650-7 6-103900-7 6-103651-7 6-103652-7 1-103648-7
19 1.898 [48.20] 6-103901-8 6-103649-8 6-103650-8 6-103900-8 6-103651-8 6-103652-8 1-103648-8
20 1.998 [50.75] 6-103901-9 6-103649-9 6-103650-9 6-103900-9 6-103651-9 6-103652-9 1-103648-9
21 2.098 [53.29] 7-103901-0 7-103649-0 7-103650-0 7-103900-0 7-103651-0 7-103652-0 2-103648-0
22 2.198 [55.83] 7-103901-1 7-103649-1 7-103650-1 7-103900-1 7-103651-1 7-103652-1 2-103648-1
23 2.298 [58.37] 7-103901-2 7-103649-2 7-103650-2 7-103900-2 7-103651-2 7-103652-2 2-103648-2
24 2.398 [60.91] 7-103901-3 7-103649-3 7-103650-3 7-103900-3 7-103651-3 7-103652-3 2-103648-3
25 2.498 [63.45] 7-103901-4 7-103649-4 7-103650-4 7-103900-4 7-103651-4 7-103652-4 2-103648-4
Notes: 1. Receptacle assemblies are furnished with strip contacts partially inserted into housingcontacts latched into preload windows. Contacts are fully
inserted into housings automatically when terminated with TE application machines, or manually when terminated with TE pistol grip hand tool.
2. Use Extraction/Lance Reset Tool No. 843477-1 to remove receptacle contacts.
3. Keying plugs are available, see page 253.

Note: All part numbers are RoHS compliant.


233
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

MTE High Pressure Receptacle AssembliesPlain,


Single-Row, .100 [2.54] Centerline
Receptacle Contacts
(See Note 1)

.520
[13.21]

Preassembled housings in strip 1.120


form are available in positions [28.45]
2 thru 12. For ease of handling,
positions 2 thru 5 are recom- .600
mended when using the [15.24]
TE Manual Pistol Grip Tool.

Material and Finish


Housing Black thermoplastic, B
Typ.
94V-0 rated
A
Contacts Phosphor Bronze, duplex
plated .000030 [0.00076] gold on Position No. 1 Indicator
contact area, .000050 [0.00127] min. (Farside)
tin in crimp area, with entire contact
underplated .000050 [0.00127] nickel .100
MTE Receptacle Assemblies

Note: Insulation displacement contacts [2.54] Typ.


accept an insulation diameter of .030 [0.76]
min. to .054 [1.37] max. with an
insulation wall thickness of .015 [0.38]
max. Mating post length for preloaded
.098
housings is .200 [5.08] min., .250 [6.35] [2.49]
max.

Related Product Data


Mateable AMPMODU Products

5 Breakaway Headers pages 102-


110, (with .230 mating length)
Reeled Breakaway Headers
pages 106, 107 (with .230 mating
length)
Machine Applied Bandolier
Strip Form Strip Form
Posts page 163 Housings Receptacle Receptacle
No. of Dimensions
Application Tooling page 273 Pos. Quantities Per Assembly Assembly
A B Strip Segment 30-26 AWG 26-22 AWG
Performance Specifications [.05-.15mm2] Wire [.12-.30mm2] Wire
page 225 2 1.980 [50.29] .198 [5.03] 10 5-104438-1 5-104439-1
3 1.490 [37.85] .298 [7.57] 5 5-104438-2 5-104439-2
Technical Documents 4 1.990 [50.55] .398 [10.11] 5 5-104438-3 5-104439-3
pages 277, 278) 5 1.990 [50.55] .498 [12.65] 4 5-104438-4 5-104439-4
Product Specification 6 2.390 [60.71] .598 [15.19] 4 5-104438-5 5-104439-5
108-25034 7 1.400 [35.56] .698 [17.73] 2 5-104438-6 5-104439-6
Application Specification 8 1.600 [40.64] .798 [20.27] 2 5-104438-7 5-104439-7
114-25026 9 1.800 [45.72] .898 [22.81] 2 5-104438-8 5-104439-8
10 2.000 [50.80] .998 [23.35] 2 5-104438-9 5-104439-9
11 2.200 [55.88] 1.098 [27.89] 2 6-104438-0 6-104439-0
12 2.400 [60.96] 1.198 [30.43] 2 6-104438-1 6-104439-1
Notes: 1. Receptacle assemblies are furnished with strip contacts partially inserted into housingcontacts latched
into preload windows. Contacts are fully inserted into housings automatically when terminated with
TE application machines, or manually when terminated with TE pistol grip hand tool.
2. High pressure receptacle contacts can be made available in other housing styles and position sizes.
Contact your TE sales representative.

Note: All part numbers are RoHS compliant.


234
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

MTE High Pressure Receptacle Assemblies Guide Ribs


Receptacle Contacts
(See Note 1)

.520
[13.21]

1.120
Preassembled housings in strip [28.45]
form are available in positions
2 thru 12. For ease of handling, .600
positions 2 thru 5 are recom- [15.24]
mended when using the
TE Manual Pistol Grip Tool.

Material and Finish B


Typ.
Housing Thermoplastic, black,
A
94V-0 rated
Position No. 1 Indicator
Contacts Phosphor Bronze, (Farside)
duplex plated .000030 [0.00076] gold
on contact area, .000050 [0.00127] min.
tin on crimp area, with entire contact
.100
underplated .000050 [0.00127] nickel. [2.54] Typ

MTE Pin Assemblies


Related Product Data
Coupling Shrouds used with
Single-Row page 240
Double-Row page 241 .098
[2.49]
Mateable AMPMODU Products
(with Receptacle Assemblies
Installed in Single-Row Coupling
Shrouds)
Pin Assemblies (Polarized/
Latching) pages 236, 237
Pin Assemblies with Guide Ribs
(installed in Panel Mount Pin
Shroud) pages 238, 239, 242
Headers (Polarized/Latching)
5
pages 244-252
Mateable AMPMODU Products
(with Receptacle Assemblies
Installed in Double-Row Coupling
Shrouds) Strip Form Strip Form
Headers, Shrouded, Double-Row Dimensions Housings Receptacle Receptacle
No. of Quantities Per Assembly Assembly
(.318 [8.08] mating post length, Pos. A B Strip Segment 30-26 AWG 26-22 AWG
.150 [3.81] end dimension) [.05-.15mm2] Wire [.12-.30mm2] Wire
pages 119-121, 124, 125, 128, 129, 2 1.980 [50.29] .198 [5.03] 10 5-147396-1 5-147030-3
131-133 3 1.490 [37.85] .298 [7.57] 5 5-147396-2 5-147030-4
Application Tooling page 273 4 1.990 [50.55] .398 [10.11] 5 5-147396-3 5-147030-1
Performance Specifications 5 1.990 [50.55] .498 [12.65] 4 5-147396-4 5-147030-2
page 225 6 2.390 [60.71] .598 [15.19] 4 5-147396-5 5-147030-5
7 1.400 [35.56] .698 [17.73] 2 5-147396-6 5-147030-6
Technical Documents 8 1.600 [40.64] .798 [20.27] 2 5-147396-7 5-147030-7
pages 277, 278 9 1.800 [45.72] .898 [22.81] 2 5-147396-8 5-147030-8
Product Specification 10 2.000 [50.80] .998 [23.35] 2 5-147396-9 5-147030-9
108-25034 11 2.200 [55.88] 1.098 [27.89] 2 6-147396-0 6-147030-0
Application Specification 12 2.400 [60.96] 1.198 [30.43] 2 6-147396-1 6-147030-1
114-25026

Note: All part numbers are RoHS compliant.


235
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

MTE Pin Assemblies, ShroudedPolarized/Latching,


Single-Row, .100 [2.54] Centerline

Pin Contacts
(See Note 1)

.520
[13.21]
Preassembled housings in strip
form are available in positions
2 thru 12. For ease of handling,
positions 2 thru 5 are recom-
mended when using the
1.470
TE Manual Pistol Grip Tool. [37.34]

Material and Finish


.950
Housing Black thermoplastic, [24.13]
94V-0 rated
Contacts Phosphor Bronze, plated
as follows:
Plating A Duplex plated .000030
[0.00076] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050 B Position No. 1
MTE Pin Assemblies

Typ. Indicator
[0.00127] nickel
A
Plating B Duplex plated .000015
[0.00038] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel .260
[6.60]
Plating C .000100 [0.00254] tin
over .000050 [0.00127] nickel on entire
contact .100
[2.54] Typ. .200
Note: Insulation displacement contacts [5.08]

5 accept an insulation diameter of .030 [0.76]


min. to .054 [1.37] max. with an insula-
tion wall thickness of .015 [0.38] max.

Related Product Data


Mateable AMPMODU Products
Receptacle Assemblies
(Polarized/Latching)
pages 230, 231
Receptacle Assemblies with Guide
Ribs (installed in Single-Row
Coupling Shroud) pages 232, 233,
235, 240
Interchangeable Crimp Contacts
page 254
Application Tooling page 273
Performance Specifications
page 225

Technical Documents
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026

236
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

MTE Pin Assemblies, ShroudedStrip Form Polarized/Latching,


Single-Row, .100 [2.54] Centerline (Continued)

Housing Strip Form Pin Assembly Strip Form Pin Assembly


No. of Dimensions Quantities 30-26 AWG [0.05-0.15mm2] Wire 26-22 AWG [0.12-0.3mm2] Wire Unloaded
Pos. A B Per Strip Housings
Segment Plating A Plating B Plating C Plating A Plating B Plating C
2 2.360 [59.94] .295 [7.49] 8 5-103949-1 5-103948-1 5-103947-1 5-103946-1 5-103945-1 5-103944-1 103653-1
3 1.980 [50.29] .395 [10.03] 5 5-103949-2 5-103948-2 5-103947-2 5-103946-2 5-103945-2 5-103944-2 103653-2
4 1.980 [50.29] .495 [12.57] 4 5-103949-3 5-103948-3 5-103947-3 5-103946-3 5-103945-3 5-103944-3 103653-3
5 2.380 [60.45] .595 [15.11] 4 5-103949-4 5-103948-4 5-103947-4 5-103946-4 5-103945-4 5-103944-4 103653-4
6 1.390 [35.31] .695 [17.65] 2 5-103949-5 5-103948-5 5-103947-5 5-103946-5 5-103945-5 5-103944-5 103653-5
7 2.390 [60.71] .795 [20.19] 3 5-103949-6 5-103948-6 5-103947-6 5-103946-6 5-103945-6 5-103944-6 103653-6
8 1.790 [45.47] .895 [22.73] 2 5-103949-7 5-103948-7 5-103947-7 5-103946-7 5-103945-7 5-103944-7 103653-7
9 1.990 [50.57] .995 [25.27] 2 5-103949-8 5-103948-8 5-103947-8 5-103946-8 5-103945-8 5-103944-8 103653-8
10 2.190 [55.63] 1.095 [27.81] 2 5-103949-9 5-103948-9 5-103947-9 5-103946-9 5-103945-9 5-103944-9 103653-9
11 2.390 [60.71] 1.195 [30.35] 2 6-103949-0 6-103948-0 6-103947-0 6-103946-0 6-103945-0 6-103944-0 1-103653-0
12 2.590 [65.79] 1.295 [32.89] 2 6-103949-1 6-103948-1 6-103947-1 6-103946-1 6-103945-1 6-103944-1 1-103653-1

MTE Pin Assemblies


MTE Pin Assemblies, ShroudedIndividual Form Polarized/Latching,
Single-Row, .100 [2.54] Centerline

Individual Pin Assembly Individual Pin Assembly


No. of Dimensions 30-26 AWG [0.05-0.15mm2] Wire 26-22 AWG [0.12-0.3mm2] Wire Unloaded
Pos. B Housings
Plating A Plating B Plating C Plating A Plating B Plating C
13 1.395 [35.43] 6-103894-2 6-103658-2 6-103659-2 6-103893-2 6-103660-2 6-103661-2 1-103653-2
14
15
16
17
1.495 [37.97]
1.595 [40.51]
1.695 [43.05]
1.795 [45.59]
6-103894-3
6-103894-4
6-103894-5
6-103894-6
6-103658-3
6-103658-4
6-103658-5
6-103658-6
6-103659-3
6-103659-4
6-103659-5
6-103659-6
6-103893-3
6-103893-4
6-103893-5
6-103893-6
6-103660-3
6-103660-4
6-103660-5
6-103660-6
6-103661-3
6-103661-4
6-103661-5
6-103661-6
1-103653-3
1-103653-4
1-103653-5
1-103653-6
5
18 1.895 [48.13] 6-103894-7 6-103658-7 6-103659-7 6-103893-7 6-103660-7 6-103661-7 1-103653-7
19 1.995 [50.67] 6-103894-8 6-103658-8 6-103659-8 6-103893-8 6-103660-8 6-103661-8 1-103653-8
20 2.095 [53.21] 6-103894-9 6-103658-9 6-103659-9 6-103893-9 6-103660-9 6-103661-9 1-103653-9
21 2.195 [55.75] 7-103894-0 7-103658-0 7-103659-0 7-103893-0 7-103660-0 7-103661-0 2-103653-0
22 2.295 [58.29] 7-103894-1 7-103658-1 7-103659-1 7-103893-1 7-103660-1 7-103661-1 2-103653-1
23 2.395 [60.83] 7-103894-2 7-103658-2 7-103659-2 7-103893-2 7-103660-2 7-103661-2 2-103653-2
24 2.495 [63.37] 7-103894-3 7-103658-3 7-103659-3 7-103893-3 7-103660-3 7-103661-3 2-103653-3
25 2.595 [65.91] 7-103894-4 7-103658-4 7-103659-4 7-103893-4 7-103660-4 7-103661-4 2-103653-4

Notes: 1. Pin assemblies are furnished with strip contacts partially inserted into housingcontacts latched into preload windows. Contacts are fully inserted
into housings automatically when terminated with TE application machines, or manually when terminated with TE pistol grip hand tool.
2. Use Extraction/Lance Reset Tool No. 843477-1 to remove pin contacts.

Note: All part numbers are RoHS compliant.


237
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

MTE Pin AssembliesGuide Ribs,


Single-Row, .100 [2.54] Centerline

Pin Contacts
(See Note 1)

.520
[13.21]

Preassembled housings in strip 1.120


form are available in positions [28.45]
2 thru 12. For ease of handling,
positions 2 thru 5 are recom-
.600
mended when using the [15.24]
TE Manual Pistol Grip Tool.

Material and Finish


Housing Black thermoplastic, B Position No. 1 Indicator
Typ.
94V-0 rated (Farside)
A
Contacts Phosphor Bronze,
plated as follows:
Plating A Duplex plated .000030
[0.00076] gold on contact area, .000050
[0.00127] min. tin in crimp area, with .100
entire contact underplated .000050 [2.54] Typ.
[0.00127] nickel
MTE Pin Assemblies

Plating B Duplex plated .000015


[0.00038] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
.098
entire contact underplated .000050 [2.49]
[0.00127] nickel
Plating C .000100 [0.00254] tin
over .000050 [0.00127] nickel on entire
contact
Note: Insulation displacement contacts
accept an insulation diameter of .030 [0.76]

5 min. to .054 [1.37] max. with an insula-


tion wall thickness of .015 [0.38] max.

Related Product Data


Mateable AMPMODU MTE Products
(with Pin Assembly Installed in
Panel Mount Pin Shroud)
pages 242, 243
Receptacle Assemblies
(Polarized/Latching)
pages 230, 231
Receptacle Assemblies with Guide
Ribs (installed in Single Row
Coupling Shroud) pages 232, 233,
235, 240
Interchangeable Crimp Contacts
page 254
Application Tooling page 273
Performance Specifications
page 225
Technical Documents
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026

238
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

MTE Pin AssembliesStrip Form with Guide Ribs,


Single-Row, .100 [2.54] Centerline (Continued)

Housing Strip Form Pin Assembly Strip Form Pin Assembly


No. of Dimensions Quantities 30-26 AWG [0.05-0.15mm2] Wire 26-22 AWG [0.12-0.3mm2] Wire Unloaded
Pos. A B Per Strip Housings
Segment Plating A Plating B Plating C Plating A Plating B Plating C
2 1.980 [50.29] 0.198 [5.03] 10 5-103955-1 5-103954-1 5-103953-1 5-103952-1 5-103951-1 5-103950-1 104503-1
3 1.490 [37.85] 0.298 [7.57] 5 5-103955-2 5-103954-2 5-103953-2 5-103952-2 5-103951-2 5-103950-2 104503-2
4 1.990 [50.55] 0.398 [10.11] 5 5-103955-3 5-103954-3 5-103953-3 5-103952-3 5-103951-3 5-103950-3 104503-3
5 1.990 [50.55] 0.498 [12.65] 4 5-103955-4 5-103954-4 5-103953-4 5-103952-4 5-103951-4 5-103950-4 104503-4
6 2.390 [60.71] 0.598 [15.19] 4 5-103955-5 5-103954-5 5-103953-5 5-103952-5 5-103951-5 5-103950-5 104503-5
7 1.400 [35.56] 0.698 [17.73] 2 5-103955-6 5-103954-6 5-103953-6 5-103952-6 5-103951-6 5-103950-6 104503-6
8 1.600 [40.64] 0.798 [20.27] 2 5-103955-7 5-103954-7 5-103953-7 5-103952-7 5-103951-7 5-103950-7 104503-7
9 1.800 [45.72] 0.898 [22.81] 2 5-103955-8 5-103954-8 5-103953-8 5-103952-8 5-103951-8 5-103950-8 104503-8
10 2.000 [50.80] 0.998 [25.35] 2 5-103955-9 5-103954-9 5-103953-9 5-103952-9 5-103951-9 5-103950-9 104503-9
11 2.200 [55.88] 1.098 [27.89] 2 6-103955-0 6-103954-0 6-103953-0 6-103952-0 6-103951-0 6-103950-0 1-104503-0
12 2.400 [60.96] 1.198 [30.43] 2 6-103955-1 6-103954-1 6-103953-1 6-103952-1 6-103951-1 6-103950-1 1-104503-1

MTE Pin Assemblies


MTE Pin AssembliesIndividual Form with Guide Ribs,
Single-Row, .100 [2.54] Centerline

Individual Pin Assembly Individual Pin Assembly


No. of Dimensions 30-26 AWG [0.05-0.15mm2] Wire 26-22 AWG [0.12-0.3mm2] Wire Unloaded
Pos. B Housings
Plating A Plating B Plating C Plating A Plating B Plating C
13 1.398 [35.51] 6-103896-2 6-103657-2 6-103656-2 6-103895-2 6-103655-2 6-103654-2 1-104503-2
14
15
16
17
1.498 [38.05]
1.598 [40.59]
1.698 [43.13]
1.798 [45.67]
6-103896-3
6-103896-4
6-103896-5
6-103896-6
6-103657-3
6-103657-4
6-103657-5
6-103657-6
6-103656-3
6-103656-4
6-103656-5
6-103656-6
6-103895-3
6-103895-4
6-103895-5
6-103895-6
6-103655-3
6-103655-4
6-103655-5
6-103655-6
6-103654-3
6-103654-4
6-103654-5
6-103654-6
1-104503-3
1-104503-4
1-104503-5
1-104503-6
5
18 1.898 [48.20] 6-103896-7 6-103657-7 6-103656-7 6-103895-7 6-103655-7 6-103654-7 1-104503-7
19 1.998 [50.75] 6-103896-8 6-103657-8 6-103656-8 6-103895-8 6-103655-8 6-103654-8 1-104503-8
20 2.098 [53.29] 6-103896-9 6-103657-9 6-103656-9 6-103895-9 6-103655-9 6-103654-9 1-104503-9
21 2.198 [55.83] 7-103896-0 7-103657-0 7-103656-0 7-103895-0 7-103655-0 7-103654-0 2-104503-0
22 2.298 [58.37] 7-103896-1 7-103657-1 7-103656-1 7-103895-1 7-103655-1 7-103654-1 2-104503-1
23 2.398 [60.91] 7-103896-2 7-103657-2 7-103656-2 7-103895-2 7-103655-2 7-103654-2 2-104503-2
24 2.498 [63.45] 7-103896-3 7-103657-3 7-103656-3 7-103895-3 7-103655-3 7-103654-3 2-104503-3
25 2.598 [65.99] 7-103896-4 7-103657-4 7-103656-4 7-103895-4 7-103655-4 7-103654-4 2-104503-4

Notes: 1. Pin assemblies are furnished with strip contacts partially inserted into housingcontacts latched into preload windows. Contacts are fully inserted
into housings automatically when terminated with TE application machines, or manually when terminated with TE pistol grip hand tool.
2. Use Extraction/Lance Reset Tool No. 843477-1 to remove pin contacts.

Note: All part numbers are RoHS compliant.


239
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Coupling Shrouds for MTE Receptacle Assemblies with Guide Ribs

Single-Row A
.307
[7.80]

Material
Black thermoplastic, 94V-0 rated
.582
[14.78]
Technical Documents
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
No. of Dimension Single-Row No. of Dimension Single-Row
Pos. A Coupling Shroud Pos. A Coupling Shroud
4 .485 [12.32] 103680-1 15 1.585 [40.26] 1-103680-2
5 .585 [14.86] 103680-2 16 1.685 [42.80] 1-103680-3
6 .685 [17.40] 103680-3 17 1.785 [45.34] 1-103680-4
7 .785 [19.94] 103680-4 18 1.885 [47.88] 1-103680-5
8 .885 [22.48] 103680-5 19 1.985 [50.42] 1-103680-6
9 .985 [25.02] 103680-6 20 2.085 [52.96] 1-103680-7
10 1.085 [27.56] 103680-7 21 2.185 [55.50] 1-103680-8
11 1.185 [30.10] 103680-8 22 2.285 [58.04] 1-103680-9
12 1.285 [32.64] 103680-9 23 2.385 [60.58] 2-103680-0
13 1.385 [35.18] 1-103680-0 24 2.485 [63.12] 2-103680-1
14 1.485 [37.72] 1-103680-1 25 2.585 [65.66] 2-103680-2
MTE Coupling Shrouds

Pin Assemblies with Guide


Ribs, Installed in Panel
Mount Pin Shroud (Refer to
pages 238, 239 & 242)

Pin Assembly,

5
Shrouded
Polarized/Latching
(Refer to pages
236 & 237)

Receptacle
Assemblies with Guide
Ribs (Refer to pages
232, 233, 235)

Single-Row
Coupling Shroud
Headers, Polarized/Latching,
Straight and Right Angle Post,
with or without Holddown
(See pages 244-252)

Typical Application of Single-Row Coupling Shroud and Mating AMPMODU MTE Products

Note: All part numbers are RoHS compliant.


240
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Coupling Shrouds for MTE Receptacle Assemblies with Guide Ribs (Continued)

Double-Row

Material .735
Black thermoplastic, 94V-0 rated [18.67]

Technical Documents Position No. 1


pages 277, 278 Identification
A
Product Specification
108-25034
Application Specification
114-25026
No. of Dimension Double-Row
Pos. A Coupling Shroud
8 .585 [14.86] 103681-1
10 .685 [17.40] 103681-2
12 .785 [19.94] 103681-3
14 .885 [22.48] 103681-4
16 .985 [25.02] 103681-5
18 1.085 [27.56] 104500-1
20 1.185 [30.10] 104500-2
22 1.285 [32.64] 104500-3
24 1.385 [35.18] 104500-4
26 1.485 [37.72] 104500-5
28 1.585 [40.26] 104500-6
30 1.685 [42.80] 104500-7

MTE Coupling Shrouds


32 1.785 [45.34] 104500-8
34 1.885 [47.88] 104500-9
40 2.185 [55.50] 1-104500-0
50 2.685 [68.20] 1-104500-1

AMPMODU Shrouded
Headers Double-Row, Straight
or RightAngle Post1 5
Double-Row
Coupling Shroud

Receptacle
Assemblies with Guide
Ribs (Refer to pages
232, 233 & 235)

1Mating AMPMODU Double-Row Shrouded Headers must have .318 [8.08] mating post length and .150 [3.81] dimension from centerline
1of last post to inside of end shroud wall.

Typical Application of Double-Row Coupling Shroud and Mating AMPMODU Products

Note: All part numbers are RoHS compliant.


241
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Panel Mount Pin Shrouds for MTE Pin Assemblies


with Guide Ribs, Single-Row
Material .310
[7.87]
Black thermoplastic, 94V-0 rated
A
.250
Technical Documents [6.35]
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026 .990
[25.15]

Position No. 1
Identification

.320
[8.13]
MTE Panel Mount
Pin Shrouds

.320
.270
[8.13]
[6.86]

5
No. of Dimensions Panel Mount No. of Dimensions Panel Mount
Pos. A B Pin Shroud Pos. A B Pin Shroud
2 .735 [18.67] .625 [15.88] 103682-1 14 1.935 [49.15] 1.825 [46.36] 1-103682-3
3 .835 [21.21] .725 [18.42] 103682-2 15 2.035 [51.69] 1.925 [48.90] 1-103682-4
4 .935 [23.75] .825 [20.96] 103682-3 16 2.135 [54.23] 2.025 [51.44] 1-103682-5
5 1.035 [26.29] .925 [23.50] 103682-4 17 2.235 [56.77] 2.125 [53.98] 1-103682-6
6 1.135 [28.83] 1.025 [26.04] 103682-5 18 2.335 [59.31] 2.225 [56.52] 1-103682-7
7 1.235 [31.37] 1.125 [28.58] 103682-6 19 2.435 [61.85] 2.325 [59.06] 1-103682-8
8 1.335 [33.91] 1.225 [31.12] 103682-7 20 2.535 [64.39] 2.425 [61.60] 1-103682-9
9 1.435 [36.45] 1.325 [33.66] 103682-8 21 2.635 [66.93] 2.525 [64.14] 2-103682-0
10 1.535 [38.99] 1.425 [36.20] 103682-9 22 2.735 [69.47] 2.625 [66.68] 2-103682-1
11 1.635 [41.53] 1.525 [38.74] 1-103682-0 23 2.835 [72.01] 2.725 [69.22] 2-103682-2
12 1.735 [44.07] 1.625 [41.28] 1-103682-1 24 2.935 [74.55] 2.825 [71.76] 2-103682-3
13 1.835 [46.61] 1.725 [43.82] 1-103682-2 25 3.035 [77.09] 2.925 [74.30] 2-103682-4

Note: All part numbers are RoHS compliant.


242
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Panel Mount Pin Shrouds for MTE Pin Assemblies


with Guide Ribs, Single-Row (Continued)
Material
Black thermoplastic, 94V-0 rated

Technical Documents
pages 277, 278
Product Specification Pin Assembly with
Guide Ribs (Refer to
108-25034 pages 238 & 239)
Application Specification
Panel Mount
114-25026 Pin Shroud

Receptacle Assemblies with Guide


Ribs, Installed in
Single-Row Coupling Shroud
(Refer to pages 232, 233, 235 & 240)

Rear of Panel

MTE Panel Mount


Pin Shrouds
Receptacle Assembly,
Polarized/Latching (Refer
to pages 230 & 231)

Typical Application of Panel Mount Pin Shroud and Mating AMPMODU Products

243
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

MTE Headers, Shrouded Polarized/Latching,


Single-Row .100 [2.54] Centerline
.025 [0.64] Square
Straight Post (With or
Without Swaged Tail)

.535
[13.59]

Swaged Retention Tail


(See Note)

Position No. 1 Indicator

A
Material and Finish .230
B
[5.84]
Housing Black thermoplastic,
C .200
94V-0 rated .060
.100
[5.08]
Ref.
[2.54]
Posts Brass, plated as follows: [1.52] X (Contact Area)
.130
Plating A Duplex plated .000030 [3.30]
[0.00076] gold on contact area, .000100 .200 .275
[0.00254] min. tin on solder area, with [5.08] [6.98]
entire post underplated .000050
[0.00127] nickel .120 .100
Typ. .350
Plating B Duplex plated .000015 [3.05] [2.54] X
[8.89]
[0.00038] gold on contact area, .000100
MTE Headers

.060
[0.00254] min. tin on solder area, with [1.52] Section X-X
entire post underplated .000050
[0.00127] nickel
Plating C .000100 [0.00254] tin
over .000050 [0.00127] nickel on entire C
post .100*
Typ.
[2.54]

Related Product Data

5 Mateable AMPMODU MTE


Products
Receptacle Assemblies
.035.003
[0.890.08]

.040.003
[1.020.08]
or
Dia. Typ.

Dia. Typ.
(Polarized/Latching)
(for Retention Tails)
pages 230, 231
Receptacle Assemblies with Guide Recommended PC Board Hole Layout
Ribs (installed in Single-Row *.003 [0.08]; tolerances not to accumulate within one connector pattern.
Coupling Shroud) Note: Swaged retention tails are provided in a minimum of two locations per header.
pages 232, 233, 235, 240

Technical Documents
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026

244
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

MTE Headers, Shrouded Polarized/Latching,


Single-Row .100 [2.54] Centerline (Continued)

No. of Dimensions Polarized/Latching Header With Swage Polarized/Latching Header Without Swage
Pos. A B C Plating A Plating B Plating C Plating A Plating B Plating C
2 .300 [7.62] .220 [5.59] .100 [2.54] 5-103908-1 5-104362-1 5-103669-1 5-103735-1 5-104363-1 5-103639-1
3 .400 [10.16] .320 [8.13] .200 [5.08] 5-103908-2 5-104362-2 5-103669-2 5-103735-2 5-104363-2 5-103639-2
4 .500 [12.70] .420 [10.67] .300 [7.62] 5-103908-3 5-104362-3 5-103669-3 5-103735-3 5-104363-3 5-103639-3
5 .600 [15.24] .520 [13.21] .400 [10.16] 5-103908-4 5-104362-4 5-103669-4 5-103735-4 5-104363-4 5-103639-4
6 .700 [17.78] .620 [15.75] .500 [12.70] 5-103908-5 5-104362-5 5-103669-5 5-103735-5 5-104363-5 5-103639-5
7 .800 [20.32] .720 [18.29] .600 [15.24] 5-103908-6 5-104362-6 5-103669-6 5-103735-6 5-104363-6 5-103639-6
8 .900 [22.86] .820 [20.83] .700 [17.78] 5-103908-7 5-104362-7 5-103669-7 5-103735-7 5-104363-7 5-103639-7
9 1.000 [25.40] .920 [23.37] .800 [20.32] 5-103908-8 5-104362-8 5-103669-8 5-103735-8 5-104363-8 5-103639-8
10 1.100 [27.94] 1.020 [25.91] .900 [22.86] 5-103908-9 5-104362-9 5-103669-9 5-103735-9 5-104363-9 5-103639-9
11 1.200 [30.48] 1.120 [28.45] 1.000 [25.40] 6-103908-0 6-104362-0 6-103669-0 6-103735-0 6-104363-0 6-103639-0
12 1.300 [33.02] 1.220 [30.99] 1.100 [27.94] 6-103908-1 6-104362-1 6-103669-1 6-103735-1 6-104363-1 6-103639-1
13 1.400 [35.56] 1.320 [33.53] 1.200 [30.48] 6-103908-2 6-104909-2 6-103669-2 6-103735-2 6-104910-2 6-103639-2
14 1.500 [38.10] 1.420 [36.07] 1.300 [33.02] 6-103908-3 6-104909-3 6-103669-3 6-103735-3 6-104910-3 6-103639-3
15 1.600 [40.64] 1.520 [38.61] 1.400 [35.56] 6-103908-4 6-104909-4 6-103669-4 6-103735-4 6-104910-4 6-103639-4
16 1.700 [43.18] 1.620 [41.15] 1.500 [38.10] 6-103908-5 6-104909-5 6-103669-5 6-103735-5 6-104910-5 6-103639-5
17 1.800 [45.72] 1.720 [43.69] 1.600 [40.64] 6-103908-6 6-104909-6 6-103669-6 6-103735-6 6-104910-6 6-103639-6
18 1.900 [48.26] 1.820 [46.23] 1.700 [43.18] 6-103908-7 6-104909-7 6-103669-7 6-103735-7 6-104910-7 6-103639-7
19 2.000 [50.80] 1.920 [48.77] 1.800 [45.72] 6-103908-8 6-104909-8 6-103669-8 6-103735-8 6-104910-8 6-103639-8
20 2.100 [53.34] 2.020 [51.31] 1.900 [48.26] 6-103908-9 6-104909-9 6-103669-9 6-103735-9 6-104910-9 6-103639-9
21 2.200 [55.88] 2.120 [53.85] 2.000 [50.80] 7-103908-0 7-104909-0 7-103669-0 7-103735-0 7-104910-0 7-103639-0
22 2.300 [58.42] 2.220 [56.39] 2.100 [53.34] 7-103908-1 7-104909-1 7-103669-1 7-103735-1 7-104910-1 7-103639-1
23 2.400 [60.96] 2.320 [58.93] 2.200 [55.88] 7-103908-2 7-104909-2 7-103669-2 7-103735-2 7-104910-2 7-103639-2
24 2.500 [63.50] 2.420 [61.47] 2.300 [58.42] 7-103908-3 7-104909-3 7-103669-3 7-103735-3 7-104910-3 7-103639-3

MTE Headers
25 2.600 [66.04] 2.520 [64.01] 2.400 [60.96] 7-103908-4 7-104909-4 7-103669-4 7-103735-4 7-104910-4 7-103639-4
Notes: 1. Selectively loaded headers are available, consult TE.
2. Use Keying Tool No. 91417-1 to remove post for keying.

Note: All part numbers are RoHS compliant.


245
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

MTE Headers, Shrouded Latching, Single-Row .100 [2.54] Centerline

.025 [0.64] Square With Holddown


Right-Angle Post

.535
[13.59]

Position No. 1 Indicator


A

B
C .100
.230
Material and Finish [2.54]
.060 .100 [5.84] .200
Typ. .200 Ref.
[1.52] [2.54] X [5.08]
Housing Black thermoplastic, [5.08] (Contact Area)
94V-0 rated
Posts Brass, plated as follows: .275
[6.99]
Plating A Duplex plated .000030 .365
[9.27]
[0.00076] gold on contact area, .000100 .120 .130
[0.00254] min. tin on solder area, with [3.05] [3.30]
entire post underplated .000050 X .350
.060 .145
[0.00127] nickel .134.003 [8.89] [3.68]
[1.52] Dia.
Plating B Duplex plated .000015 [3.400.08]
Section X-X
(2 Plc.)
[0.00038] gold on contact area, .000100
[0.00254] min. tin on solder area, with
entire post underplated .000050 .340.003
[0.00127] nickel Typ. .100* .055.003
MTE Headers

[8.640.08] Typ. Typ.


[2.54] [1.400.08]
Plating C .000100 [0.00254] tin
over .000050 [0.00127] nickel on entire
post .035.003
Dia. Typ.
[0.890.08]
C

Recommended PC Board Hole Layout


(PC board thickness (for Holddown Feature) is .062.008 [1.570.20])
*.003 [0.08]; tolerance not to accumulate within one connector pattern.

5 Without Holddown

.535
[13.59]

Related Product Data Position No. 1 Indicator


A
Mateable AMPMODU MTE
Products .060
B
.230
Receptacle Assemblies [1.52] C [5.84]
.100 .200
(Latching) pages 230, 231 .100
Typ. [5.08]
Ref.
[2.54] [2.54]
Receptacle Assemblies with Guide X (Contact Area)
Ribs (installed in Single-Row
Coupling Shroud) .200 .275
pages 232, 233, 235, 240 [5.08] [6.99]

.130
Technical Documents .120
[3.30]
[3.05]
pages 277, 278 X .350 .145
.060 [8.89] [3.68]
Product Specification [1.52]
108-25034 C Section X-X
.100*
Application Specification Typ.
[2.54]
114-25026
.035.003
Dia. Typ.
[0.890.08]
Recommended PC Board Hole Layout
*.003 [0.08]; tolerance not to accumulate within one connector pattern.
246
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

MTE Headers, Shrouded Latching, Single-Row .100 [2.54] Centerline (Continued)

No. of Dimensions Latching Header With Hold Down Latching Header Without Hold Down
Pos. A B C Plating A Plating B Plating C Plating A Plating B Plating C
2 .300 [7.62] .220 [5.59] .100 [2.54] 5-103904-1 5-103673-1 5-103672-1 5-104935-5 5-103635-1 5-103634-1
3 .400 [10.16] .320 [8.13] .200 [5.08] 5-103904-2 5-103673-2 5-103672-2 5-104935-3 5-103635-2 5-103634-2
4 .500 [12.70] .420 [10.67] .300 [7.62] 5-103904-3 5-103673-3 5-103672-3 5-104935-1 5-103635-3 5-103634-3
5 .600 [15.24] .520 [13.21] .400 [10.16] 5-103904-4 5-103673-4 5-103672-4 5-104935-6 5-103635-4 5-103634-4
6 .700 [17.78] .620 [15.75] .500 [12.70] 5-103904-5 5-103673-5 5-103672-5 5-104935-7 5-103635-5 5-103634-5
7 .800 [20.32] .720 [18.29] .600 [15.24] 5-103904-6 5-103673-6 5-103672-6 5-104935-8 5-103635-6 5-103634-6
8 .900 [22.86] .820 [20.83] .700 [17.78] 5-103904-7 5-103673-7 5-103672-7 5-104935-2 5-103635-7 5-103634-7
9 1.000 [25.40] .920 [23.37] .800 [20.32] 5-103904-8 5-103673-8 5-103672-8 5-104935-9 5-103635-8 5-103634-8
10 1.100 [27.94] 1.020 [25.91] .900 [22.86] 5-103904-9 5-103673-9 5-103672-9 6-104935-0 5-103635-9 5-103634-9
11 1.200 [30.48] 1.120 [28.45] 1.000 [25.40] 6-103904-0 6-103673-0 6-103672-0 6-104935-1 6-103635-0 6-103634-0
12 1.300 [33.02] 1.220 [30.99] 1.100 [27.94] 6-103904-1 6-103673-1 6-103672-1 5-104935-4 6-103635-1 6-103634-1
13 1.400 [35.56] 1.320 [33.53] 1.200 [30.48] 6-103904-2 6-103673-2 6-103672-2 6-104935-2 6-103635-2 6-103634-2
14 1.500 [38.10] 1.420 [36.07] 1.300 [33.02] 6-103904-3 6-103673-3 6-103672-3 6-104935-3 6-103635-3 6-103634-3
15 1.600 [40.64] 1.520 [38.61] 1.400 [35.56] 6-103904-4 6-103673-4 6-103672-4 6-104935-4 6-103635-4 6-103634-4
16 1.700 [43.18] 1.620 [41.15] 1.500 [38.10] 6-103904-5 6-103673-5 6-103672-5 6-104935-5 6-103635-5 6-103634-5
17 1.800 [45.72] 1.720 [43.69] 1.600 [40.64] 6-103904-6 6-103673-6 6-103672-6 6-104935-6 6-103635-6 6-103634-6
18 1.900 [48.26] 1.820 [46.23] 1.700 [43.18] 6-103904-7 6-103673-7 6-103672-7 6-104935-7 6-103635-7 6-103634-7
19 2.000 [50.80] 1.920 [48.77] 1.800 [45.72] 6-103904-8 6-103673-8 6-103672-8 6-104935-8 6-103635-8 6-103634-8
20 2.100 [53.34] 2.020 [51.31] 1.900 [48.26] 6-103904-9 6-103673-9 6-103672-9 6-104935-9 6-103635-9 6-103634-9
21 2.200 [55.88] 2.120 [53.85] 2.000 [50.80] 7-103904-0 7-103673-0 7-103672-0 7-104935-0 7-103635-0 7-103634-0
22 2.300 [58.42] 2.220 [56.39] 2.100 [53.34] 7-103904-1 7-103673-1 7-103672-1 7-104935-1 7-103635-1 7-103634-1
23 2.400 [60.96] 2.320 [58.93] 2.200 [55.88] 7-103904-2 7-103673-2 7-103672-2 7-104935-2 7-103635-2 7-103634-2
24 2.500 [63.50] 2.420 [61.47] 2.300 [58.42] 7-103904-3 7-103673-3 7-103672-3 7-104935-3 7-103635-3 7-103634-3
25 2.600 [66.04] 2.520 [64.01] 2.400 [60.96] 7-103904-4 7-103673-4 7-103672-4 7-104935-4 7-103635-4 7-103634-4

MTE Headers
Notes: 1. Selectively loaded headers are available, consult TE.
2. Use Keying Tool No. 91417-1 to remove post for keying.

Note: All part numbers are RoHS compliant.


247
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

MTE Headers, Shrouded Latching, Single-Row .100 [2.54] Centerline

.025 [0.64] Square Straight


Post (With Swaged Tails
and PC Board Orientation)

.535
[13.59]

Swaged Retention Tail


(See Note)

Position No. 1 Indicator

.060 A
[1.52]
Material and Finish (2 Plc.)
B

Housing Black thermoplastic, C .070


94V-0 rated [1.78]
.120
Posts Brass, plated .000100 [3.05] X .100
[0.00254] tin over .000050 [0.00127] [2.54]
.050
nickel on entire post .260 [1.27]
.200
[6.60] Dia.
[5.08]

Related Product Data


.060 X .050
Mateable AMPMODU MTE [1.52] .100 [1.27]
[2.54]
Products Typ.
Receptacle Assemblies
(Polarized/Latching) .230
MTE Headers

pages 230, 231 [5.84] .130


.065.003 [3.30]
Dia.
Receptacle Assemblies with Guide [1.650.08]
C
Ribs (installed in Single-Row
.100*
Coupling Shroud) [2.54]
Typ. .135.003
pages 232, 233, 235, 240 [3.430.08]

.075.003
Technical Documents .040.003
[1.910.08] .350
Dia. Typ. [8.89]
pages 277, 278 [1.020.08]
(for Retention Tails)

5 Product Specification
108-25034
Application Specification
114-25026
Recommended PC Board Hole Layout
*.003 [0.08]; tolerances not to accumulate within one connector pattern.
Note: Swaged retention tails are provided in a minimum of two locations per header.
Section X-X

No. of Dimensions Latching


Pos. A B C Header
2 .300 [7.62] .220 [5.59] .100 [2.54] 5-104450-1
3 .400 [10.16] .320 [8.13] .200 [5.08] 5-104450-2
4 .500 [12.70] .420 [10.67] .300 [7.62] 5-104450-3
5 .600 [15.24] .520 [13.21] .400 [10.16] 5-104450-4
6 .700 [17.78] .620 [15.75] .500 [12.70] 5-104450-5
7 .800 [20.32] .720 [18.29] .600 [15.24] 5-104450-6
8 .900 [22.86] .820 [20.83] .700 [17.78] 5-104450-7
9 1.000 [25.40] .920 [23.37] .800 [20.32] 5-104450-8
10 1.100 [27.94] 1.020 [25.91] .900 [22.86] 5-104450-9

Note: All part numbers are RoHS compliant.


248
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

MTE Headers, Through-hole, Surface Mount Compatible,


Shrouded Polarized/Latching, Single-Row .100 [2.54] Centerline
.025 [0.64] Square Straight
Post (With Swaged Tails
and PC Board Orientation)

.535
[13.59]

Swaged Retention Tail


(See Note)

Position No. 1 Indicator


A

B
.230
Material and Finish C .100
[5.84]
.060 [2.54] .200
Housing Black thermoplastic, [1.52] [5.08]
Ref.
94V-0 rated X (Contact Area)
Posts Brass, duplex plated .000015
[0.00038] gold on contact area, .000100 .262
[6.65]
[0.00254] min tin on solder tail, with
entire post underplated .000050
.120 .200
[0.00127] nickel [3.05] .100 Typ.
[5.08] .350
.060 [2.54] .130
[8.89]
[1.52] X [3.30]
Related Product Data Section X-X
Mateable AMPMODU MTE

MTE Headers
Products .040.002 Typ.
.100*
Receptacle Assemblies with Guide Typ. [1.020.05]
[2.54]
Ribs (installed in Single-Row .065.003
.180.002 [1.650.08]
Coupling Shroud) [4.570.05] .135.003
pages 232, 233, 235, 240 [3.430.08]
Receptacle Assemblies (Polarized
Latching) pages 230, 231
.040.003 Dia. Typ. .020.002
[1.020.08]

5
[0.510.05]
Plated-Thru Hole
Typ.
Technical Documents Header Profile (Shown for .075.003
orientation purposes only) [1.900.08]
pages 277, 278
Product Specification Recommended PC Board Hole Layout
108-25034 (Stencil Thickness = .010 [0.25])
Application Specification *.003 [0.08] tolerance not to accumulate within one connector pattern
114-25026

No. of Dimensions Polarized/Latching


Pos. A B C Header, High-Temp
2 .300 [7.62] .220 [5.59] .100 [2.54] 5-104809-1
3 .400 [10.16] .320 [8.13] .200 [5.08] 5-104809-2
4 .500 [12.70] .420 [10.67] .300 [7.62] 5-104809-3
5 .600 [15.24] .520 [13.21] .400 [10.16] 5-104809-4
6 .700 [17.78] .620 [15.75] .500 [12.70] 5-104809-5
7 .800 [20.32] .720 [18.29] .600 [15.24] 5-104809-6
8 .900 [22.86] .820 [20.83] .700 [17.78] 5-104809-7
9 1.000 [25.40] .920 [23.37] .800 [20.32] 5-104809-8
10 1.100 [27.94] 1.020 [25.91] .900 [22.86] 5-104809-9
11 1.200 [30.48] 1.120 [28.45] 1.000 [25.40] 6-104809-0
12 1.300 [33.02] 1.220 [30.99] 1.100 [27.94] 6-104809-1

Note: All part numbers are RoHS compliant.


249
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

MTE Headers, Polarized/Latching, Through-Hole,


Surface Mount Compatible, Single-Row, .100 [2.54] Centerline
.025 [0.64] Square
Right-Angle Post (With
Holddown)
.535
[13.59]

Position No. 1 Indicator


.230
A [5.84]
.060
[1.52] B
(2 Plc.) C .100 .200
.100 Ref.
Material and Finish .120 [2.54]
Typ. X
[2.54] [5.08]
[3.05] (Contact Area)
Housing Black thermoplastic,
94V-0 rated .262
.200
[6.65]
Posts Brass, duplex plated .000015 [5.08]
[0.00038] gold on contact area, .000100 .145
.180
[0.00254] min. tin on solder tail, with [4.57] [3.68]
entire post underplated .000050 .060
[1.52] X
[0.00127] nickel .350
[8.89] .145
[3.68]
Section X-X
Related Product Data
.093+.003 Dia.
-.000
Mateable AMPMODU MTE [ .093
2.36+0.08 ]
-.000
MTE Headers

Products (2 Plc.)
.093
Receptacle Assemblies (Polarized/
Latching) pages 230, 231 .340.003
Receptacle Assemblies with Guide [8.640.08] .100* Typ. .090.002
[2.54] [2.290.05]
Ribs (installed in Single-Row
Coupling Shroud) pages 232, 233,
235, 240 .070.002 Typ.
.035.003 [1.780.51] .058.003
Dia. Typ. C [1.470.08]
[0.890.08]
Technical Documents Plated-Thru Hole (2 Plc.)

5 pages 277, 278


Product Specification
108-25034
Recommended PC Board
(Stencil Thickness = .010 [0.25])
*.003 [0.08]; tolerance is not to accumulate within one connector pattern.

Application Specification
114-25026

Dimensions Right-Angle Dimensions Right-Angle


No. of Header No. of Header
Pos. A B C Pos. A B C
with Hold Down with Hold Down
2 .300 [7.62] .220 [5.59] .100 [2.54] 5-104361-1 14 1.500 [38.10] 1.420 [36.07] 1.300 [33.02] 6-104361-3
3 .400 [10.16] .320 [8.13] .200 [5.08] 5-104361-2 15 1.600 [40.64] 1.520 [38.61] 1.400 [35.56] 6-104361-4
4 .500 [12.70] .420 [10.67] .300 [7.62] 5-104361-3 16 1.700 [43.18] 1.620 [41.15] 1.500 [38.10] 6-104361-5
5 .600 [15.24] .520 [13.21] .400 [10.16] 5-104361-4 17 1.800 [45.72] 1.720 [43.69] 1.600 [40.64] 6-104361-6
6 .700 [17.78] .620 [15.75] .500 [12.70] 5-104361-5 18 1.900 [48.26] 1.820 [46.23] 1.700 [43.18] 6-104361-7
7 .800 [20.32] .720 [18.29] .600 [15.24] 5-104361-6 19 2.000 [50.80] 1.920 [48.77] 1.800 [45.72] 6-104361-8
8 .900 [22.86] .820 [20.83] .700 [17.78] 5-104361-7 20 2.100 [53.34] 2.020 [51.31] 1.900 [48.26] 6-104361-9
9 1.000 [25.40] .920 [23.37] .800 [20.32] 5-104361-8 21 2.200 [55.88] 2.120 [53.85] 2.000 [50.80] 7-104361-0
10 1.100 [27.94] 1.020 [25.91] .900 [22.86] 5-104361-9 22 2.300 [58.42] 2.220 [56.39] 2.100 [53.34] 7-104361-1
11 1.200 [30.48] 1.120 [28.44] 1.000 [25.40] 6-104361-0 23 2.400 [60.96] 2.320 [58.93] 2.200 [55.88] 7-104361-2
12 1.300 [33.02] 1.220 [30.99] 1.100 [27.94] 6-104361-1 24 2.500 [63.50] 2.420 [61.47] 2.300 [58.42] 7-104361-3
13 1.400 [35.56] 1.320 [33.53] 1.200 [30.48] 6-104361-2 25 2.600 [66.04] 2.520 [64.01] 2.400 [60.96] 7-104361-4

Note: All part numbers are RoHS compliant.


250
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

MTE Headers, Right-Angle, Polarized/Latching, Surface Mount


.025 E
[0.64] Typ. .120 .136.001
[3.05] [3.450.02]
2 Plc
.085.002
.140 [2.160.05]
[3.56] .065 Min Pad on
[1.65] Underside 2 Plc
.535 .190.001
[13.59] .265 [4.830.02]
Material and Finish [6.73] 2 Plc
.165.003
Housing Black thermoplastic, 94V-0 [4.190.07] + .002
rated .047 -.003

Posts Brass, plated as follows:
Position No. 1 Indicator
.133
[3.38] [1.19 ]
+ 0.05
- 0.07
.070.002 (Plated thru hole)
Plating A Duplex plated .000030 A [1.780.05]
Typ
C .038 2 Plc
[.00076] gold on contact area, .000100 [0.97]
[.00254] min. tin on solder area, with Recommended PC Board Layout
entire post underplated .000050 .350
[.00127] nickel. B [8.89]
K .200
Plating B Duplex plated .000015 .120 [5.08] Ref
[.00038] gold on contact area, .000100 [3.05] Contact Area
[.00254] min. tin on solder area, with
entire post underplated .000050
[.00127] nickel.
Plating C .000100 [.00254] tin over .262
.000050 [.00127] nickel on entire post [6.65] .200
K [5.08] .457
.002 See L
C [11.61]
[0.05]
Recommended (Tangent
Ref
PC Board Layout D
of heel)
.076 Section K-K
(Refer to MTE Application Spec. [1.93]

MTE Headers
114-25026 for Stencil Aperture Layout
Using .006 [0.152] or .008 [0.203]
Stencil Thickness)

Related Product Data .288


Mateable AMPMODU MTE [7.32]
Ref
Products .054/.039
[1.37/0.99]
Receptacle Assemblies (Polarized/
Latching) pages 230, 231 View L

Receptacle Assemblies with Guide


Ribs (installed in Single-Row
Coupling Shroud) pages 232, 233,
235, 240
No. of
Pos.
.140.002
[3.560.05]

A B
Dimensions
C D E
Right-Angle Latching SMT Headers
Plating A Plating B Plating C
5
2 .400 [10.16] .220 [5.59] .100 [2.54] .140 [3.56] .290 [7.37] 5-147323-1 5-147278-1 5-147324-1
Technical Documents 3 .500 [12.70] .320 [8.13] .200 [5.08] .190 [4.83] .390 [9.91] 5-147323-2 5-147278-2 5-147324-2
pages 277, 278 4 .600 [15.24] .420 [10.67] .300 [7.62] .240 [6.10] .490 [12.45] 5-147323-3 5-147278-3 5-147324-3
5 .700 [17.78] .520 [13.21] .400 [10.16] .290 [7.37] .590 [14.99] 5-147323-4 5-147278-4 5-147324-4
Product Specification
6 .800 [20.32] .620 [15.75] .500 [12.70] .340 [8.64] .690 [17.53] 5-147323-5 5-147278-5 5-147324-5
108-25034
7 .900 [22.86] .720 [18.29] .600 [15.24] .390 [9.91] .790 [20.07] 5-147323-6 5-147278-6 5-147324-6
Application Specification
8 1.000 [25.40] .820 [20.83] .700 [17.78] .440 [11.18] .890 [22.61] 5-147323-7 5-147278-7 5-147324-7
114-25026
9 1.100 [27.94] .920 [23.37] .800 [20.32] .490 [12.45] .990 [25.15] 5-147323-8 5-147278-8 5-147324-8
10 1.200 [30.48] 1.020 [25.91] .900 [22.86] .540 [13.72] 1.090 [27.69] 5-147323-9 5-147278-9 5-147324-9
11 1.300 [33.02] 1.120 [28.45] 1.000 [25.40] .590 [14.99] 1.190 [30.23] 6-147323-0 6-147278-0 6-147324-0
12 1.400 [35.56] 1.220 [30.99] 1.100 [27.94] .640 [16.26] 1.290 [32.77] 6-147323-1 6-147278-1 6-147324-1
13 1.500 [38.10] 1.320 [33.53] 1.200 [30.48] .690 [17.53] 1.390 [35.31] 6-147323-2 6-147278-2 6-147324-2
14 1.600 [40.64] 1.420 [36.07] 1.300 [33.02] .740 [18.80] 1.490 [37.85] 6-147323-3 6-147278-3 6-147324-3
15 1.700 [43.18] 1.520 [38.61] 1.400 [35.56] .790 [20.07] 1.590 [40.39] 6-147323-4 6-147278-4 6-147324-4
16 1.800 [45.72] 1.620 [41.15] 1.500 [38.10] .840 [21.34] 1.690 [42.93] 6-147323-5 6-147278-5 6-147324-5
17 1.900 [48.26] 1.720 [43.69] 1.600 [40.64] .890 [22.61] 1.790 [45.47] 6-147323-6 6-147278-6 6-147324-6
18 2.000 [50.80] 1.820 [46.23] 1.700 [43.18] .940 [23.88] 1.890 [48.01] 6-147323-7 6-147278-7 6-147324-7
19 2.100 [53.34] 1.920 [48.77] 1.800 [45.72] .990 [25.15] 1.990 [50.55] 6-147323-8 6-147278-8 6-147324-8
20 2.200 [55.88] 2.020 [51.31] 1.900 [48.26] 1.040 [26.42] 2.090 [53.09] 6-147323-9 6-147278-9 6-147324-9
21 2.300 [58.42] 2.120 [53.85] 2.000 [50.80] 1.090 [27.69] 2.190 [55.63] 7-147323-0 7-147278-0 7-147324-0
22 2.400 [60.96] 2.220 [56.39] 2.100 [53.34] 1.140 [28.96] 2.290 [58.17] 7-147323-1 7-147278-1 7-147324-1
23 2.500 [63.50] 2.320 [58.93] 2.200 [55.88] 1.190 [30.23] 2.390 [60.71] 7-147323-2 7-147278-2 7-147324-2
Note: All part numbers are RoHS 24 2.600 [66.04] 2.420 [61.47] 2.300 [58.42] 1.240 [31.50] 2.490 [63.25] 7-147323-3 7-147278-3 7-147324-3
compliant. 25 2.700 [68.58] 2.520 [64.01] 2.400 [60.96] 1.290 [32.77] 2.590 [65.79] 7-147323-4 7-147278-4 7-147324-4

251
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

MTE Headers, Vertical, Polarized/Latching, Surface Mount


E

.025 Typ. .075


[0.62] [1.90]

.535
[13.59]

.313
Material and Finish [7.62]
.063
Position No. 1 Indicator [1.52]
Housing Black thermoplastic, 94V-0
rated A
.230
Posts Brass, plated as follows: .025 Typ. B
[5.84]
[0.64] K
Plating A Duplex plated .000030
[.00076] gold on contact area, .000100
[.00254] min. tin on solder area, with
entire post underplated .000050
[.00127] nickel.
.100 .120
Plating B Duplex plated .000015 [2.54]
K
[3.05] Pick and Place Cap
[.00038] gold on contact area, .000100
.200
[.00254] min. tin on solder area, with [5.08]
Section K-K
entire post underplated .000050 .100 Typ.
[.00127] nickel. [2.54]
.055.003
Plating C .000100 [.00254] tin + .002
.052 .003 [1.400.08]
over .000050 [.00127] nickel on entire .088.003
[1.32 ]
+ 0.05
MTE Headers

[2.250.08]
post 0.07
Plated Thru-Hole

Recommended
PC Board Layout
.070.002
(Refer to MTE Application Spec. [1.780.05]
.113 .227
[2.88] [5.76]
114-25026 for Stencil Aperature Layout
C 0.06
using .006 [0.152] or .008 [0.203]
D [1.53]
stencil thickness Position No. 1

5 Related Product Data


Mateable AMPMODU MTE
Products
No. of
Pos. A B
Recommended PC Board Layout

Dimensions
C D E Plating A
Vertical SMT Headers
Plating B Plating C
Receptacle Assemblies (Polarized/ 2 .300[7.62] .220[5.59] .100[2.54] .220[5.60] .110[2.80] 5-1375583-1 5-1375582-1 5-1375549-1
Latching) pages 230, 231 3 .400[10.16] .320[8.13] .200[5.08] .320[8.14] .160[4.07] 5-1375583-2 5-1375582-2 5-1375549-2
Receptacle Assemblies with Guide 4 .500[12.70] .420[10.67] .300[7.62] .420[10.68] .210[5.34] 5-1375583-3 5-1375582-3 5-1375549-3
Ribs (installed in Single-Row 5 .600[15.24] .520[13.21] .400[10.16] .520[13.22] .260[6.61] 5-1375583-4 5-1375582-4 5-1375549-4
Coupling Shroud) pages 232, 233,
6 .700[17.78] .620[15.75] .500[12.70] .620[15.76] .310[7.88] 5-1375583-5 5-1375582-5 5-1375549-5
235, 240
7 .800[20.32] .720[18.29] .600[15.24] .720[18.30] .360[9.15] 5-1375583-6 5-1375582-6 5-1375549-6
8 .900[22.86] .820[20.83] .700[17.78] .820[20.84] .410[10.42] 5-1375583-7 5-1375582-7 5-1375549-7
Technical Documents 9 1.000[25.40] .920[23.37] .800[20.32] .920[23.38] .460[11.69] 5-1375583-8 5-1375582-8 5-1375549-8
pages 277, 278
10 1.100[27.94] 1.020[25.91] .900[22.86] 1.020[25.92] .510[12.96] 5-1375583-9 5-1375582-9 5-1375549-9
Product Specification 11 1.200[30.48] 1.120[28.45] 1.000[25.40] 1.120[28.46] .560[14.23] 6-1375583-0 6-1375582-0 6-1375549-0
108-25034 12 1.300[33.02] 1.220[30.99] 1.100[27.94] 1.220[31.00] .610[15.50] 6-1375583-1 6-1375582-1 6-1375549-1
Application Specification 13 1.400[35.56] 1.320[33.53] 1.200[30.48] 1.320[33.54] .660[16.77] 6-1375583-2 6-1375582-2 6-1375549-2
114-25026 14 1.500[38.10] 1.420[36.07] 1.300[33.02] 1.420[36.08] .710[18.04] 6-1375583-3 6-1375582-3 6-1375549-3
15 1.600[40.64] 1.520[38.61] 1.400[35.56] 1.520[38.62] .760[19.31] 6-1375583-4 6-1375582-4 6-1375549-4
16 1.700[43.18] 1.620[41.15] 1.500[38.10] 1.620[41.16] .810[20.58] 6-1375583-5 6-1375582-5 6-1375549-5
17 1.800[45.72] 1.720[43.69] 1.600[40.64] 1.720[43.70] .860[21.85] 6-1375583-6 6-1375582-6 6-1375549-6
18 1.900[48.26] 1.820[46.23] 1.700[43.18] 1.820[46.24] .910[23.12] 6-1375583-7 6-1375582-7 6-1375549-7
19 2.000[50.80] 1.920[48.77] 1.800[45.72] 1.920[48.78] .960[24.39] 6-1375583-8 6-1375582-8 6-1375549-8
20 2.100[53.34] 2.020[51.31] 1.900[48.26] 2.020[51.32] 1.010[25.66] 6-1375583-9 6-1375582-9 6-1375549-9
21 2.200[55.88] 2.120[53.85] 2.000[50.80] 2.120[53.86] 1.060[26.93] 7-1375583-0 7-1375582-0 7-1375549-0
22 2.300[58.42] 2.220[56.39] 2.100[53.34] 2.220[56.40] 1.110[28.20] 7-1375583-1 7-1375582-1 7-1375549-1
23 2.400[60.96] 2.320[58.93] 2.200[55.88] 2.320[58.94] 1.160[29.47] 7-1375583-2 7-1375582-2 7-1375549-2
24 2.500[63.50] 2.420[61.47] 2.300[58.42] 2.420[61.48] 1.210[30.74] 7-1375583-3 7-1375582-3 7-1375549-3
Note: All part numbers are RoHS
25 2.600[66.04] 2.520[64.01] 2.400[60.96] 2.520[64.02] 1.260[32.01] 7-1375583-4 7-1375582-4 7-1375549-4
compliant.
252
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Interchangeable Contacts, Wire Crimp (Snap-In)


Material and Finish Short Point Receptacles
.068
Copper alloy C7025, plated as follows: [1.73]
Plating A Duplex plated .000030
[0.00076] min. gold on contact area,
.000050 [0.00127] min. tin in crimp
area, with entire contact underplated
.000050 [0.00127] min. nickel
Plating B Duplex plated .000015
[0.00038] min. gold on contact area,
.000050 [0.00127] min. tin in crimp
area, with entire contact underplated
.000050 [0.00127] min. nickel
Plating C .000100 [0.00254] min.
tin over .000050 [0.00127] min. nickel .060
on entire contact .460 [1.52]
[11.68]

C C

Keying Plug
Part No. 104072-1
Ten plugs are supplied per strip.
Order quantity reflects the number
of strips required. .012

MTE Headers
[0.30]
Gap

Section C - C
Extraction/Lance Reset

5
Tool No. 843477-1

Related Product Data Technical Documents


pages 277, 278
Performance Characteristics
page 221 Product Specification
Housings used in 108-1472, 108-1472-1
Short Pointpages 223, 224 Application Specification
AMPMODU MTE Unloaded 114-25038
Housings pages 228-233
Application Tooling
pages 270-272

Wire Size Heavy Duty Miniature Applicator for


Ins. Contact Part No. Applicator for Hand
Range Dia. (Standard Pressure) AMP-O-MATIC Tool
Finish AMP-O-LECTRIC Stripper/Crimper
AWG [mm2] Range Strip Form Loose Piece Nos.
Machine* Machine
Plating A 1-104481-1 1-104481-3
.025-.060
32-28 0.03-0.08 0.64-1.52 Plating B 1-104481-0 1-104481-2 567296-2 466980-1 91518-1
Plating C 5-104481-2 5-104481-6
Plating A 1-104480-3 1-104480-6
.025-.060
26-22 0.13-0.3 0.64-1.52 Plating B 1-104480-2 1-104480-5 567297-2 466981-1 91518-1
Plating C 1-104480-7 1-104480-4
Plating A 1-104479-0 1-104479-3
.025-.060
24-20 0.2-0.5 0.64-1.52 Plating B 104479-9 1-104479-2 567298-2 466982-1 91551-1
Plating C 104479-8 1-104479-1
*For use with Model K machines. Call the Technical Support Center (1-800-522-6752) for part nos. of applicators for use with the Model G machines (shown
on page 270), as well as other bench machines and fully automatic AMPOMATOR lead making machines.
Note: These wire crimp contacts can be intermixed with insulation displacement crimp contacts.

Note: All part numbers are RoHS compliant.


253
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Interchangeable Contacts, Wire Crimp (Snap-In) (Continued)


Material and Finish Pins
Phosphor bronze, plated as follows:
Plating A Duplex plated .000030
[0.00076] gold on contact area, .000030
[0.00076] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
Plating B Duplex plated .000015
[0.00038] gold on contact area, .000030
[0.00076] min. tin on solder area, with
entire contact underplated .000050
[0.00127] nickel .025
[0.64]
Plating C .000100 [0.00254] tin
over .000050 [0.00127] nickel on entire
contact

.025
[0.64]

Extraction/Lance Reset
Tool No. 843477-1
MTE Contacts

Related Product Data .810


[20.57]
Performance Characteristics
page 221
AMPMODU MTE Unloaded
Housings pages 228-233
Application Tooling
pages 270-272

5 Technical Documents
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026

Contact Applicator for


Wire Size Part No. Heavy Duty
Miniature Applicator AMP-O-MATIC
Ins. Dia. Hand
Range Finish (Standard Pressure) Stripper/ Tool
Range for AMP-O-LECTRIC
AWG [mm2] Strip Loose Machine* Crimper Nos.
Form Piece Machine
Plating A 5-104506-6 5-104506-7
32-28 0.03-0.08 .025-.054 Plating B 5-104506-4 5-104506-5 58342-2
0.64-1.37
Plating C 5-104506-2 5-104506-3
Plating A 5-104505-6 5-104505-7
.036-.054
26-22 0.14-0.32 0.91-1.37 Plating B 5-104505-4 5-104505-5 567239-2 466983-1 91531-1
Plating C 5-104505-2 5-104505-3
*For use with AMP-O-LECTRIC Model K machines. Call Technical Support Center (1-800-522-6752) for part nos. of applicators for use with the
AMP-O-LECTRIC Model G machines (shown on page 270), as well as other bench machines and fully automatic AMPOMATOR lead making machines.
Note: These wire crimp contacts can be intermixed with insulation displacement crimp contacts.

Note: All part numbers are RoHS compliant.


254
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

MT and Shielded MT Interconnection System

Product Facts
Full line of mass
termination tooling offers
lowest installed cost for
most production needs
Dual cantilever beams with
anti-overstress features
provide redundant contact
of mating post and limit
beam deflection, preventing
permanent deformation
Redundant insulation
displacement slots provide
for maximum reliability
Integral wire strain relief
Typical Application of End-to-End Stacking
on contact can prevent wire
motion from being
transmitted to wire
termination areas 5-102398-8 D-R Assembly Wire-to-Board
Built-in contact post stop 102396-8 Hermaphroditic Covers
5-102398-8 D-R Assembly
can protect terminated wire 102540-8 Polarizing Cover
102536-8 Back Cover
from being disturbed by 5-102398-8 D-R Assembly
over-insertion of mating 102537-8 Ejection Cover

Interconnection System
102536-8 Back Cover 5-102398-8 D-R Assembly

MT and Shielded MT
post, prevents wire from 102541-8 Non-Polarizing Cover
entering contact area and 102185-2 Latch 102536-8 Back Cover
positively limits mating
connector depth
5-103168-8 Hdr
Insulation displacement 5102154-4 Header
contacts and crimp,
5-102398-8 D-R Assembly
snap-in contacts are 102681-5 Latching Cover 5-103166-8 Header
interchangeable 102536-8 Back Cover 5-103166-8 Header

Complete serviceability 5-102398-8 D-R Assembly

with replacement contacts


Cover styles include
low profile (polarized,
102396-8 Hermaphroditic Covers

5
non-polarized, latching and
ejection) and standard
profile (hermaphroditic The AMPMODU MT and system, features a mating Performance
and ejection) Shielded MT Interconnection interface that is the same as Characteristics
System offers labor and the conventional AMPMODU
Connector housings may cost savings through mass crimp, snap-in contact, fea- Contact Current Rating
be stacked end-to-end 3 amperes for single contact in free air.
termination technology, turing dual cantilever beams, (Amperage could vary due to ambient
within one pair of covers. while maintaining the time- built-in overstress protection
All varieties of covers in temperature, wire size and duty cycles.)
proven reliability of the and a completely enclosed Operating Temperature
this catalog are suitable for AMPMODU product family. box design.
multiple housing stacking -65C to +105C
The MT system is comprised To reduce EMI/ESD (electro- Termination Resistance
applications similar to the of preloaded, double-row
example illustrated in the magnetic interference/ 12 milliohms max.
receptacle assemblies with electrostatic discharge) at Max. Mating Force
photograph to the right snap-on covers and a variety the input-output interface, High pressure - 26 oz. [7.23 N]
Recognized under the of shielding hardware and add-on metal shields can be Standard pressure - 9 oz. [2.50 N]
Component Program of accessories. The system is used to convert standard Min. Unmating Force
Underwriters supported by a full line of MT connectors to shielded High pressure 5 oz. [1.39 N]
Laboratories Inc., R
mass termination tooling to MT connectors. Standard pressure 1.5 oz. [0.417 N]
File No. E28476 meet virtually most produc- Contact Retention in Housing
Certified by Canadian tion needs. 5 lb. [22.24 N] per contact min.
Standards R
The insulation displacement
Association, contact, the heart of the MT
File No. LR 7189

Note: All part numbers are RoHS compliant.


255
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

MT Receptacle Assemblies, Double-Row


.100 x .100 [2.54 x 2.54] Centerline
Housings Pre-loaded with Contact
I.D. No.
Standard Pressure Contacts 1 1 1 1 1 1 .125
[3.18]

.600
[15.24]

.270
[6.86]
1
Circuit No. 1
A Max. Identifier
Material and Finish
Housing Glass-filled thermoplastic, .070
MT Receptacle
[1.78] Right-Angle
black, 94V-0 rated .100 Header Assembly
.050
Contacts Copper alloy, duplex [1.27]
B [2.54]
plated .000030 [0.00076] gold in mating
area, .000050 [0.00127] tin on solder
tail, with entire contact underplated .240 .300
.000050 [0.00127] nickel [6.10] [7.62]

.100
Related Product Data [2.54]
Typ.
PC .270
Mateable Connectors pages 117, Board [6.86]
122, 126, 130, 264
MT Receptacle Assemblies

Cable Insulation Wall


Thickness .015 [0.39] max. Part Nos. (Stamped)
Cable Insulation Diameter No. of Dimensions Wire Size Range Unloaded
.050 [1.27] max. Pos. A B 30-26 AWG 26-22 AWG 22-20 AWG Housings
[0.05-0.15 mm2] [0.12-0.3 mm2] [0.3-0.6 mm2]
Mating Post Length
.222-.273 [5.64-6.94] max. 6 .300 [7.62] .200 [5.08] 5-102393-1 5-102398-1 5-102448-1 102394-1
8 .400 [10.16] .300 [7.62] 5-102393-2 5-102398-2 5-102448-2 102394-2
Performance Characteristics
page 255 10 .500 [12.70] .400 [10.16] 5-102393-3 5-102398-3 5-102448-3 102394-3
12 .600 [15.24] .500 [12.70] 5-102393-4 5-102398-4 5-102448-4 102394-4
Replacement Contacts page 265
14 .700 [17.78] .600 [15.24] 5-102393-5 5-102398-5 5-102448-5 102394-5
Connector Covers

5
16 .800 [20.32] .700 [17.78] 5-102393-6 5-102398-6 5-102448-6 102394-6
pages 258, 259
18 .900 [22.86] .800 [20.32] 5-102393-7 5-102398-7 5-102448-7 102394-7
Application Tooling
20 1.000 [25.40] .900 [22.86] 5-102393-8 5-102398-8 5-102448-8 102394-8
pages 273-275
22 1.100 [27.94] 1.000 [25.40] 5-102393-9 5-102398-9 5-102448-9 102394-9
24 1.200 [30.48] 1.100 [27.94] 6-102393-0 6-102398-0 6-102448-0 1-102394-0
Technical Documents 26 1.300 [33.02] 1.200 [30.48] 6-102393-1 6-102398-1 6-102448-1 1-102394-1
pages 277, 278 28 1.400 [35.56] 1.300 [33.02] 6-102393-2 6-102398-2 6-102448-2 1-102394-2
Product Specification 30 1.500 [38.10] 1.400 [35.56] 6-102393-3 6-102398-3 6-102448-3 1-102394-3
108-25015, 108-25018, 108-25030 32 1.600 [40.64] 1.500 [38.10] 6-102393-4 6-102398-4 6-102448-4 1-102394-4
Application Specification 34 1.700 [43.18] 1.600 [40.64] 6-102393-5 6-102398-5 6-102448-5 1-102394-5
114-25032 40 2.000 [50.80] 1.900 [48.26] 6-102393-8 6-102398-8 6-102448-8 1-102394-8
Instruction Sheet 50 2.500 [63.50] 2.400 [60.96] 7-102393-3 7-102398-3 7-102448-3 2-102394-3
408-6532 60 3.000 [76.20] 2.900 [73.66] 7-102393-8 7-102398-8 7-102448-8 2-102394-8
64 3.200 [81.28] 3.100 [78.74] 8-102393-0 8-102398-0 8-102448-0 3-102394-0
Note: Contact Extraction/Lance Reset Tool No. 843477-3, see page 265.

Keying Plugs

Part No. 86286-1


(Plugs into receptacle contact)
Part No. 87077-2
Material Natural color nylon (Plugs directly into housing)

Note: All part numbers are RoHS compliant.


256
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

MT Receptacle Assemblies, Double-Row


.100 x .100 [2.54 x 2.54] Centerline (Continued)
Housings Pre-loaded with Contact
I.D. No.
High Pressure Contacts
4 4 4 4 4 4 4 4 4 4
.125
[3.18]

.600
[15.24]

.270
[6.86]
1

Material and Finish


A Max.
Housing Glass-filled thermoplastic, Circuit No. 1
black, 94V-0 rated Identifier

Contacts Copper alloy, duplex


plated .000030 [0.00076] gold in mating
area, .000050 [0.00127] tin on solder
tails, with entire contact underplated
.000050 [0.00127] nickel Right-Angle MT Receptacle
.050 Header Assembly
B .240
[1.27] [6.10]
Related Product Data
Mateable Connectors pages 117,
122, 126, 130, 264 .300

MT Receptacle Assemblies
[7.62]
Cable Insulation Wall
Thickness .015 [0.39] max.
.100
Cable Insulation Diameter .100 [2.54] PC
Typ. .270
.050 [1.27] max. [2.54]
Board [6.86]
Mating Post Length
.200-.273 [5.64-6.94] max.
Performance Characteristics
page 255
Replacement Contacts page 265
Connector Covers
pages 258, 259
Application Tooling
pages 273-275
No. of
Pos. A
Dimensions
B 30-26 AWG
[0.05-0.15 mm2]
Part Nos. (Stamped*)
Wire Size Range
26-22 AWG
[0.12-0.3 mm2]
22-20 AWG
[0.3-0.6 mm2]
5
6 .300 [7.62] .200 [5.08] 5-102693-1 5-102694-1 5-102695-1
Technical Documents 8 .400 [10.16] .300 [7.62] 5-102693-2 5-102694-2 5-102695-2
pages 277, 278 10 .500 [12.70] .400 [10.16] 5-102693-3 5-102694-3 5-102695-3
12 .600 [15.24] .500 [12.70] 5-102693-4 5-102694-4 5-102695-4
Product Specification
14 .700 [17.78] .600 [15.24] 5-102693-5 5-102694-5 5-102695-5
108-25015, 108-25018, 108-25030
16 .800 [20.32] .700 [17.78] 5-102693-6 5-102694-6 5-102695-6
Application Specification 18 .900 [22.86] .800 [20.32] 5-102693-7 5-102694-7 5-102695-7
114-25032 20 1.000 [25.40] .900 [22.86] 5-102693-8 5-102694-8 5-102695-8
Instruction Sheet
*Cavity identification first cavity (one side); TE Part No. and date code stamped on housing where size permits.
408-6532 Note: Contact Extraction/Lance Reset Tool No. 843477-3, see page 265.

Keying Plugs

Part No. 86286-1


(Plugs into receptacle contact)
Part No. 87077-2
Material Natural color nylon (Plugs directly into housing)

Note: All part numbers are RoHS compliant.


257
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Low Profile Covers for Double-Row MT Receptacle Assemblies


Material Front Covers
Black thermoplastic, flame retardant A - Polarizing Cover B - Latching Cover
(Mates with AMPMODU 4-sided shrouded (Mates with AMPMODU 4-sided shrouded
headers. Refer to pages 117, 122, 126, 130.) headers with extraction slot. Refer to
Related Product Data pages 117, 122, 126, 130.)
For use on Double-Row MT Receptacle
Assemblies pages 256, 257 .750 .750
[19.05] [19.05]

Technical Documents
pages 277, 278
Product Specification
108-25015, 108-25018, 108-25030 L
L
Application Specification
114-25032
Instruction Sheet
408-6532

Note: See page 259 for Low Profile C - Ejection Cover D - Non-Polarizing Cover
Cover Part Nos. (Mates with AMP-LATCH universal ejection (Designed for use with shielded connectors,
style pin headers equipped with latching pages 261 & 262; or for non-polarizing
ears, Part No. 102185-2 (with push tabs) applications.)
or Part No. 102312-2 (without push tabs),
see TE Catalog 82012.
MT Low Profile Covers

.750
[19.05]
Assembled*
.750
.480
[19.05]
.095 [12.19]
Typ.
[2.41]

5 .150
[3.81] .468
[11.89]
*Dimension applies to cover when
installed on connector housing.

Back Covers
E - For Shielding and F - For Shielding Applications
Non-Shielding Applications (For use with Non-Polarizing Cover only.)
(For use with any low profile cover.)

L L

Note: All part numbers are RoHS compliant.


258
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Standard Profile Covers for Double-Row MT Receptacle Assemblies


Material G - Hermaphroditic Cover H - Ejection Cover
(Two hermaphroditic covers can be used or (Mates with AMP-LATCH universal ejection style
Black thermoplastic, flame retardant one hermaphroditic cover can be used with pin headers equipped with latching ears, Part No.
an H Ejection Cover.) 102185-2 (with push tabs) or Part No. 102312-2
(without push tabs), see TE Catalog 82012.
Related Product Data 1.120 Assembled*
[28.45]
For use on Double-Row MT Receptacle
Assemblies pages 256, 257
.850 Top View
[21.59]
Technical Documents 1.120
pages 277, 278 [28.45]

Product Specification
108-25015, 108-25018, 108-25030
Application Specification .095
114-25032 [2.41]
Instruction Sheet Typ.
408-6532
Bottom View

.150
[3.81]

.468
*Dimension applies to cover when [11.89]
installed on connector housing.

MT Standard Profile Covers


L

Low Profile Covers Standard Profile Covers


Front Covers Back Covers
No. of Dimension E G H
Pos. L F
A B C D Shielding and Hermaphroditic Ejection
Shielding
Polarizing Latching Ejection Non-Polarizing Non-Shielding
Applications
Applications
6 .300 [7.62] 102540-1 102537-1 102541-1 102536-1 102396-1
8
10
12
14
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
102540-2
102540-3
102540-4
102540-5


102681-1
102681-2
102537-2
102537-3
102537-4
102537-5
102541-2
102541-3
102541-4
102541-5
102536-2
102536-3
102536-4
102536-5


102823-5
102823-6
102396-2
102396-3
102396-4
102396-5




5
16 .800 [20.32] 102540-6 102681-3 102537-6 102541-6 102536-6 102823-7 102396-6
18 .900 [22.86] 102540-7 102681-4 102537-7 102541-7 102536-7 102823-1 102396-7
20 1.000 [25.40] 102540-8 102681-5 102537-8 102541-8 102536-8 102823-4 102396-8 103268-6
22 1.100 [27.94] 102540-9 102681-6 102537-9 102541-9 102536-9 102823-8 102396-9
24 1.200 [30.48] 1-102540-0 102681-7 1-102537-0 1-102541-0 1-102536-0 102823-9 1-102396-0 103268-7
26 1.300 [33.02] 1-102540-1 102681-8 1-102537-1 1-102541-1 1-102536-1 1-102823-0 1-102396-1 103268-8
28 1.400 [35.56] 1-102540-2 102681-9 1-102537-2 1-102541-2 1-102536-2 1-102823-1 1-102396-2
30 1.500 [38.10] 1-102540-3 1-102681-0 1-102537-3 1-102541-3 1-102536-3 1-102823-2 1-102396-3 103268-9
32 1.600 [40.64] 1-102681-1 1-102537-4 1-102541-4 1-102536-4 1-102823-3 1-102396-4
34 1.700 [43.18] 1-102681-2 1-102537-5 1-102541-5 1-102536-5 1-102823-4 1-102396-5 1-103268-0
40 2.000 [50.80] 1-102681-5 1-102537-8 1-102541-8 1-102536-8 102823-2 1-102396-8
50 2.500 [63.50] 2-102681-0 2-102537-3 2-102541-3 2-102536-3 102823-3 2-102396-3 1-103268-3
60 3.000 [76.20] 2-102537-8 2-102541-8 2-102536-8 2-102396-8
64 3.200 [81.28] 3-102537-0 3-102541-0 3-102536-0 3-102396-0

Note: All part numbers are RoHS compliant.


259
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Shielding Hardware and Accessories for MT Interconnection System

Product Facts
Add-on shielding
accessories for existing
AMPMODU Standard MT
and PC board mounted
headers
Compact design
Tin plated copper alloy
material
Redundant cantilever
beams provide for good
peripheral contact,
eliminating the need for
a separate RF gasket
Polarized mating
360 cable braid
termination with cable
jacket support Shielded MT Receptacles

Cable shielding hardware


permits molded cable
terminations after assembly
Hardware and Accessories

Must be used with braided


shielded cables
MT Shielding

Solder tabs on right-angle


header shields are
self-retaining in a PC board

5
Shielded Right-Angle Headers

The shielded AMPMODU good peripheral contact Shields for right-angle


MT system features add-on with the mating outer shell headers have integral
metal shielding kits for half. This feature also cantilever beams which
double-row standard MT eliminates the need for a provide good contact with
receptacle assemblies and separate RF gasket. the mating shielded MT
double-row right-angle Detents in the cantilever receptacle assembly,
headers. beam provide a positive without the use of a
Cable shielding hardware lock when the two halves separate RF gasket.
consists of a ferrule and two are mated. During assembly
stamped and formed shell the inner and outer shell
halves. The inner shell half halves are snapped
has a series of integral together over a terminated
cantilever beams to provide standard MT connector.

260
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Shielding Hardware and Accessories for


Double-Row MT Receptacle Assemblies
Two-Piece Shields
Straight Exit
Outer Shell Half

Material and Finish


Shell Halves Copper alloy, .020
[0.51] thick; pretinned .000030
[0.00076] min.

A
Related Product Data C

Double-Row MT Receptacle B
Assemblies pages 256, 257
Non-Polarizing Covers (Part No.
Series 102541 with back cover .326
102536 or 102823) [8.28]
pages 258, 259
Shield Ferrules page 263

Technical Documents Ferrule Purchased


separately
pages 277, 278 (See page 263)
Product Specification
108-25015, 108-25018, 108-25030 Flare braid over

Hardware and Accessories


assembled shells for
Application Specification Standard MT crimping under ferrule
114-25032 Receptacle Assembly

MT Shielding
Purchased separately
Instruction Sheet (Refer to pages 256 & 257)
408-6532

Inner Shell Half

Part Nos.
No. of Dimensions
Pos. Outer Inner
A B C Shell Shell
6 .410 [10.41] .817 [20.75] 1.268 [32.21] 102988-2 102987-6
10 .610 [15.49] .817 [20.75] 1.667 [42.34] 103137-2 103136-2
16 .910 [23.11] .950 [24.13] 1.925 [48.90] 103153-2 103152-2
26 1.410 [35.81] .950 [24.13] 1.925 [48.90] 103341-2 103340-2
40 2.110 [53.59] 1.325 [33.66] 2.468 [62.69] 104272-1 104271-1
50 2.610 [66.29] .950 [24.13] 2.468 [62.69] 103158-2 103157-2
Note: Match shield size to number of connector positions.

Note: All part numbers are RoHS compliant.


261
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Shielding Hardware and Accessories for


Double-Row MT Receptacle Assemblies (Continued)
Two-Piece Shields
Right-Angle Exit .125
Dia.
[3.18]
(See Note 2) C
Material and Finish Outer Shell Half
Shell Halves Copper alloy, .020
[0.51] thick; pretinned .000030
[0.00076] min.

A
Related Product Data
Double-Row MT Receptacle B
Assemblies pages 256, 257
Non-Polarizing Covers (Part No.
Series 102541 with back cover
102536 or 102823) Ferrule Purchased .326
separately [8.28]
pages 258, 259 (See page 263)
Shield Ferrules page 263

Flare braid over


Technical Documents assembled shells for
pages 277, 278 crimping under ferrule

Product Specification
108-25015, 108-25018, 108-25030
Hardware and Accessories

Standard MT
Application Specification Receptacle Assembly
114-25032 Purchased separately
MT Shielding

(Refer to pages 256 & 257)


Instruction Sheet
408-6532

Inner Shell Half

No. of Dimensions Part Nos.


Pos. A B C Outer Shell Inner Shell
18 1.010 [25.65] 1.120 [28.45] 1.413 [35.89] 102784-2 102783-2
26 1.410 [35.81] 1.166 [29.62] 1.975 [50.17] 103139-2 103138-2
40 2.110 [53.59] 1.135 [28.83] 2.633 [66.88] 102786-2 102785-2
50 2.610 [66.29] .983 [24.97] 3.133 [79.58] 102788-2 102787-2
60 3.110 [78.99] 1.118 [28.40] 3.606 [91.59] 103141-2 103140-2
Notes: 1. Match shield size to number of connector positions.
2. Hole is provided in 26 through 60-position cable shields for application of optional cable tie pull ring after
assembly.

Note: All part numbers are RoHS compliant.


262
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Shielding Hardware and Accessories for


Double-Row MT Receptacle Assemblies (Continued)
Ferrules for Shielding Kits

Material and Finish


Soft copper, tin plated

Related Product Data


Used with Shielding Kits
pages 261, 262

Technical Documents
pages 277, 278
Product Specification Application Tooling
108-25015, 108-25018, 108-25030
Application Specification
114-25032
Instruction Sheet
408-6532

Hardware and Accessories


MT Shielding
AMP-O-LECTRIC Model TE Hand Tool 91410-1
G Terminating Machine (Die Set required, see table below)

No. of Straight-Exit Shields Right-Angle Exit Shields Cable Dia. Ferrule Applicator Die* Hand Tool Die Sets
Pos. Outer Inner Outer Inner Range Part Number Assembly Part No. Insulation Braid
6

10
102988-2 102987-6

103137-2 103136-2


0.200-0.250 [5.08-6.35]
0.250-0.300 [6.35-7.62]
0.310-0.360 [7.87-9.14]
0.370-0.420 [9.40-10.67]
102985-4
5-102903-2
5-102903-1
5-102789-1
812665-2
812665-5
812665-4
812665-3
1-527116-8
1-527116-6
1-527116-5
1-527116-4
527116-4
527116-3
527116-3
527116-3
5
0.190-0.240 [4.83-6.10] 5-102903-3 812665-6 1-527116-7 527116-3
0.250-0.300 [6.35-7.62] 5-102903-2 812665-5 1-527116-6 527116-3
16 103153-2 103152-2
0.310-0.360 [7.87-9.14] 5-102903-1 812665-4 1-527116-5 527116-3
0.370-0.420 [9.40-10.67] 5-102789-1 812665-3 1-527116-4 527116-3
0.190-0.240 [4.83-6.10] 5-102903-3 812665-6 1-527116-7 527116-3
0.250-0.300 [6.35-7.62] 5-102903-2 812665-5 1-527116-6 527116-3
18 102784-2 102783-2
0.310-0.360 [7.87-9.14] 5-102903-1 812665-4 1-527116-5 527116-3
0.370-0.420 [9.40-10.67] 5-102903-1 812665-3 1-527116-4 527116-3
0.320-0.370 [8.13-9.40] 5-102903-4 812665-9 1-527116-3 527116-2
26 103341-2 103340-2 103139-2 103138-2
0.430-0.460 [10.92-11.68] 5-102789-2 812665-7 1-527116-1 527116-2
0.320-0.370 [8.13-9.40] 5-102903-4 812665-9 1-527116-3 527116-2
40 104272-1 104271-1 102786-2 102785-2
0.430-0.460 [10.92-11.68] 5-102789-2 812665-7 1-527116-1 527116-2
0.380-0.420 [9.65-10.67] 5-102903-6 1-812665-5 1-527116-2 527116-1
50 103158-2 103157-2 102788-2 102787-2 0.430-0.460 [10.92-11.68] 5-102903-5 1-812665-4 1-527116-1 527116-1
0.470-0.520 [11.94-13.21] 5-102789-3 1-812665-3 1-527116-0 527116-1
0.470-0.520 [11.94-13.21] 5-102903-8 1-812665-8
60 103141-2 103140-2 0.500-0.545 [12.70-13.84] 5-102903-7 1-812665-7
0.550-0.600 [13.97-15.24] 5-102789-4 1-812665-6
*For use with Model K machines. Call the TE Technical Support Center (1-800-522-6752) for part nos. of applicators for use with the
AMP-O-LECTRIC Model G machines (also shown on page 270), as well as other bench machines and fully automatic AMPOMATOR lead making machines.
Notes: 1. Ferrules are used with shielding kits shown on pages 261 & 262, and are purchased separately.
2. Individual anvils and crimpers also may be purchased separately.
3. Ferrule Part Number 1-102903-8 also requires Spacer Part Number 527116-9.

Note: All part numbers are RoHS compliant.


263
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Shielded MT Headers for use with Shielded MT Receptacle Assemblies

AMPMODU Right-Angle
Headers PC Board Mounted .755
[19.18]

Material and Finish C

Housing Black thermoplastic, .460


[11.68]
flame retardant
Posts Copper alloy, plated .000030
[0.00076] gold over .000050 [0.00127]
nickel on entire post
Shield Copper alloy, .020 [0.51]
Shield
thick; pretinned .000030 [0.00076] min.
Right-Angle
B Header
.550
.125
Related Product Data [3.18]
[13.97]
.434
[11.02]
Mating Connectors Double-Row .030
.025
MT Receptacle Assemblies with [0.64] Sq. Posts
[0.76]
Shielding Hardware pages 256-263
.290
[7.37]
Technical Documents A

pages 277, 278


.135
Product Specification .318
[3.43]
108-25015, 108-25018, 108-25030 [8.08]
Application Specification
114-25032. .145.003
MT Shielded Headers

Instruction Sheet [3.680.08]


2 Plc.
408-6532 .145.003
[3.680.08] A A
2 Plc.

.050.003
.725
[1.270.08]
[18.45]

5
.550.003
[13.970.08]
.003 .100.003
.100.003 .003 .040.003 D [0.08] [2.540.08]
D [0.08] Dia.
[2.540.08] [1.020.08]
.003 (All holes)
2D [0.08] .003
2D [0.08]

Recommended PC Board Hole Layout Recommended PC Board Hole Layout


for 6, 8 and 10 Positions for 16 thru 50 Positions
D - Contact centerline is .100 [2.54]; .003 [0.08] tolerances
not to accumulate within one connector pattern.

No. of Dimensions Header Shield


Pos. A B C Part Nos. Part Nos.
6 .200 [5.08] .430 [10.92] .510 [12.95] 102792-6 102991-1
8 .300 [7.62] .530 [13.46] .610 [15.49] 102792-8 102991-2
10 .400 [10.16] .630 [16.00] .710 [18.03] 102792-1 102791-2
16 .700 [17.78] .930 [23.62] 1.010 [25.65] 102792-7 102791-3
18 .800 [20.32] 1.030 [26.16] 1.110 [28.19] 102792-2 102791-4
20 .900 [22.86] 1.130 [28.70] 1.210 [30.73] 102792-5 1-102791-0
26 1.200 [30.48] 1.430 [36.32] 1.510 [38.35] 102792-9 102791-1
50 2.400 [60.96] 2.630 [66.80] 2.710 [68.83] 102792-4 102791-8

Note: All part numbers are RoHS compliant.


264
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Replacement MT Receptacle Contacts

Insulation Displacement
Contacts
Contact
Identification
Material and Finish
Copper alloy, duplex plated .000030
[0.00076] gold in mating area, .000100- .050
Max.
.000200 [0.00254-0.00508] tin in crimp [1.27]
area, with entire contact underplated Insulation
Diameter
.000050 [0.00127] nickel

Related Product Data


Performance Characteristics Standard Pressure High Pressure
Wire Size Range
page 255 Receptacle Receptacle
AWG [mm2]
Application Tooling Contact Ident. Part No. Contact Ident. Part No.
pages 273-275 30-26 0.05-0.15 1 5-102395-2 4 5-102641-6
26-22 0.12-0.3 2 5-102399-1 5 5-102642-6
22-20 0.3-0.6 3 5-102449-6
Technical Documents Note: Termination tooling for MT receptacle insulation displacement contacts is shown on pages 273-275.
pages 277, 278
Product Specification
108-25015, 108-25018, 108-25030
Application Specification
114-25032
Instruction Sheet
408-6532 MT receptacle contacts The MT receptacle contact The configuration of the

MT Contacts
incorporate the following cross-section is primarily receptacle completely
features. rectangular, with rounded encloses the spring
corners. Two integral members helping to prevent
cantilever beams contact damage during handling
Cantilever the mating square male and assembly, and makes
Beams
posts. Deflection of these the system compatible with
spring members is limited automatic application
by anti-overstress and techniques.
Anti-
overstress

Wide
excessive permanent
deformation is prevented.
This feature allows a wide
range for tolerance of
5
Misalignment
Tolerance misalignment of mating
contacts.
Extraction/Lance Reset Tool
No. 843477-3

Note: All part numbers are RoHS compliant.


265
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Mini-Tandem Spring Receptacle Housings and Contacts

Product Facts
Individual contacts mate
with .025 [0.64] sq. posts,
.125 [3.18] long
Crimp snap-in contacts
accept 32-22 AWG
[0.03-0.32 mm2] wire
Retention latch provides for
positive installation
No insertion tool required
High durability design
provides long life
Available with .000015
[0.00038] or .000030
[0.00076] thick gold inlay
in contact areas, or bright
tin plated
Closed-entry housings
Mini-contact box size:
.060 [1.52] sq.
Mini-Tandem Spring
Housings and Contacts

Housings can be stacked


Mini Tandem Spring

on .100 [2.54] centers in


either direction
Mini-Tandem Mini-Tandem Spring Mini-Tandem Spring Specifications
Spring Housings are Receptacle Contacts are Receptacle Contacts are
Recognized under the Contact Current Rating
designed to mate with .025 used in single- or double- 3 amperes
Component Program of [0.64] posts. When used row housings with .100
Underwriters Termination Resistance
individually, they will mate [2.54] centerline spacing. 12 milliohms (max.) gold plated
Laboratories Inc., R
with posts as short as .125 Single-row housings can be contacts
File No. E28476 [3.18] and when used in a converted into double-row

5
18 milliohms (max.) tin plated
Certified by Canadian housing, they will mate with connectors on .100 x .200 contacts
Standards .140 [3.55] long posts. [2.54 x 5.08] centers with Durability Ref. Product
Association,
R
These versatile contacts the use of stacking clips. Specification 108-25031
File No. LR 7189 may be used for Mini-Tandem Spring
interconnecting posted Housings can be stacked
pc panels, I/O wiring and side-by-side or end-to-end
cross-connecting pin on .100 [2.54] centers.
arrays.
The receptacle contact's
box configuration provides
for long contact life with
controlled contact mating
forces which minimize wear.
An external retention spring
facilitates quick assembly
and provides firm seating in
a contact housing.

266
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Mini-Tandem Spring Housings, Single-Row

.100 [2.54] Centerline

.550
[13.97]
.030
[0.76]

Material Black glass-filled poly- .036


ester, 94V-0 rated [0.91]
.066
[1.68]

Technical Documents
pages 277, 278 .050
[1.27] .100
Max.
Product Specification A Max. [2.54]
108-25031
Application Specification
114-25021
.100 .050
[2.54] [1.27]
B Spaces
@ .100 [2.54] = C

Minimum mating post length is .140 [3.55].

Spring Housings
5
No. of Dimensions Housing
Pos. A B C Part No.
2 .200 [5.08] 1 .100 [2.54] 530554-1
4 .400 [10.16] 3 .300 [7.62] 530554-3
8 .800 [20.32] 7 .700 [17.78] 530554-7
12 1.200 [30.48] 11 1.100 [27.94] 1-530554-1
16 1.600 [40.64] 15 1.500 [38.10] 1-530554-5
18 1.800 [45.72] 17 1.700 [43.18] 1-530554-7
20 2.000 [50.80] 19 1.900 [48.26] 1-530554-9
22 2.200 [55.88] 21 2.100 [53.34] 2-530554-1
Note: Mini-Tandem Spring contacts for use in these housings are shown on page 269.
MaterialNatural color nylon,
94V-2 rated

Keying Plug
Part No. 531226-1
(Plugs directly into housing)
Note: All part numbers are RoHS compliant.
267
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Mini-Tandem Spring Housings, Double-Row

.100 [2.54] Centerline

.550
[13.97]
.030
[0.76]

.036
Material Black glass-filled [0.91]
polyester, 94V-0 rated* .066
[1.68]

Technical Documents
pages 277, 278 A Max.

Product Specification
108-25031 .200
[5.08]
Application Specification
.100
114-25021 [2.54]
Max.
.100 .050
[2.54] [1.27]
B Spaces
@ .100 [2.54] = C

Minimum mating post length is .140 [3.55].


Spring Contacts
Mini-Tandem

5
Material Natural color nylon,
94V-2 rated

No. of Dimensions Housing


Pos. A B C Part No.
6 .300 [7.62] 2 .200 [5.08] 530902-1
8 .400 [10.16] 3 .300 [7.62] 530902-6
12 .600 [15.24] 5 .500 [12.70] 2-530902-0
Keying Plug 16 .800 [20.32] 7 .700 [17.78] 3-530902-0
Part No. 531226-1
(Plugs directly into housing) Note: Mini-Tandem Spring contacts for use in these housings are shown on page 269.

*Consult TE for specific


UL recognition.
Note: All part numbers are RoHS compliant.
268
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Mini-Tandem Spring Contacts

Receptacle Contacts .060


[1.52]

Material and Finish


Phosphor bronze, plated as follows:
Plating A Duplex plated .000030
[0.00076] gold inlay on contact area, matte .060
tin in crimp area, with entire contact [1.52]
underplated .000050 [0.00127] nickel
Plating B Duplex plated .000015
[0.00038] gold inlay on contact area, matte
tin in crimp area, with entire contact
underplated .000050 [0.00127] nickel .085
Min.
[2.15]
Plating C Duplex plated .000050 Contact
[0.00127] over matte tin in contact area, Area with
over .000030 [0.00076] nickel on entire Gold Inlay
contact
Plating D .000100 [0.00254] min.
matte tin over .000030 [0.00076] nickel on
entire contact

Technical Documents Low Pressure Contacts


pages 277, 278 Miniature Applicator for
Wire Size Range Ins. Dia. Contact Part No. Applicator for AMP-O-MATIC
Product Specification Range Finish AMP-O-LECTRIC Stripper/Crimper
AWG mm2 Strip Form Loose Piece
108-25031 Machine* Machine
Application Specification 0.36-0.54 Plating A 5531216-3 5531216-4
26-22 0.14-0.32 466819-2 466943-1
114-25021 [0.64-1.37] Plating B 5531216-1 5531216-2

Spring Housings
Mini-Tandem
Standard Pressure Contacts
Miniature Applicator for
Wire Size Range Ins. Dia. Contact Part No. Applicator for AMP-O-MATIC
Finish
AWG mm2 Range Strip Form Loose Piece AMP-O-LECTRIC Stripper/Crimper
Machine* Machine

5
Plating B 530901-2 530901-3
.025-.054
32-28 0.03-0.08 Plating C 5530901-6 5530901-7 466723-1 466952-1
[0.64-1.37]
Plating D 5530901-4 5530901-5
Plating B 5530553-4
.036-.054
26-22 0.14-0.32 Plating C 5530553-6 466819-2 466943-1
[0.91-1.37]
Plating D 5530553-2

High Pressure Contacts


Miniature Applicator for
Wire Size Range Ins. Dia. Contact Part No. Applicator for AMP-O-MATIC
Finish
AWG mm2 Range Strip Form Loose Piece AMP-O-LECTRIC Stripper/Crimper
Machine* Machine
.025-.054
32-28 0.03-0.08 [0.64-1.37] Plating B 5531225-6 466723-1 466952-1
.036-.054
26-22 0.14-0.32 [0.91-1.37] Plating B 5531224-6 466819-2 466943-1

*For use with AMP-O-LECTRIC Model K machines. Call the Tooling/Technical Assistance Center (1-800-522-6752)
for part nos. of applicators for use with the AMP-O-LECTRIC Model G machines (shown on page 270), as well as
other bench machines and fully automatic AMPOMATOR lead making machines.
Notes: 1. Mini-Tandem Spring Receptacle Contacts are for use only in the housings shown on pages 267 & 268.
They cannot be used in AMPMODU Mod IV Housings.
2. Use Hand Tool No. 91540-1 for crimping loose-piece receptacles to all wire sizes listed above.
3. Application tooling is described on pages 270 & 275.

Note: All part numbers are RoHS compliant.


269
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Application Tooling for Wire Crimp Contacts


Tooling shown on this page AMP-O-LECTRIC Model G Terminating Machine
is designed to terminate (Shown with Optional Crimp Force Monitor)
wire crimp contacts used in
various AMPMODU wire-to- A totally new design of our
board connectors. Refer to most popular machine for
page 88 to determine the bench-top operation. It
applicable connectors. features a quiet and reliable
direct motor drive, electronic
controls for easy setup and
operation, and improved
guarding and lighting for
operator convenience and
safety. All versions include
either manual or automatic
precision adjustment for
crimp height.
For further details, request
TE Catalog 65828.

AMP-O-MATIC Stripper/Crimper Machine


Application Tooling

This machine automatically


Applicators strips as well as terminates
Several terminating individual wires. Similar to
machines, including the the AMP-O-LECTRIC Model
AMP-O-LECTRIC Model G, G machine, applicators
AMP-O-MATIC Stripper/ are quickly interchangeable,
Crimper and AMPOMATOR and it includes precision
CLS machines, are adjustment for crimp height.
designed for use with All adjustments can be made

5 interchangeable
applicators. Basic styles are
quickly interchangeable to
minimize costly downtimes,
from the front of the machine,
without special tools.
For further details, request
TE Catalog 65004.
and feature dial-in wire and
insulation crimp height
settings. Special applicators
are available for use with
the Crimp Force Monitor
(see page 272), for
measuring the crimp height EDGE, Electronic Applicator
of each termination as it is Counter
made, plus evaluating the
The new versatile EDGE
quality of each crimp.
applicator counter tracks
wearable tool usage for the
most effective maintenance
planning. The completely
electronic counter with clear
LCD display, indicates
cycles since installation.
By performing maintenance
at measured intervals with
pre-set limits, operators
avoid breakdowns and
rejects caused by tool wear
or mid-adjustment. For more
Heavy Duty Miniature information, request catalog
Applicators 1773385.
270
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Application Tooling for Wire Crimp Contacts (Continued)


AMP 3K/40 and AMP 5K/40
Terminators

As a value oriented
terminator, the AMP 3K/40
and AMP 5K/40 are
designed for customers
that require the increased
output and quality of a
semiautomatic machine at
a competitive price. By
incorporating the most
commonly requested
features as standard and
offering a long list of
optional equipment, these
terminators offer flexibility to
meet the specific needs of
various applications at the
lowest possible cost. AMP 5K/40 Terminator

Application Tooling
Optional Stripping Module for
the AMP 3K/40, AMP 5K/40 and
the AMP-O-LECTRIC Model G

The combination of the


Stripping Module with the

5
AMP-O-LECTRIC Model G
Terminator or the AMP
3K/40, 5K/40 provides an
economical, proficient
method of stripping wire
and crimping terminals on
the same machine. Wires
are stripped moments
before crimping, meaning
there is virtually no chance
of damaging wire
conductors during handling
or storage. Once the wire is
fed into the start sensor, the
Stripping Module does the
rest, improving placement
accuracy. For more
information, request catalog
1309085.

271
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Application Tooling for Wire Crimp Contacts (Continued)


Tooling shown on this page AMPOMATOR System III Leadmaker The AMPOMATOR
is designed to terminate System III is an automatic
wire crimp contacts used in machine for the production
various AMPMODU wire-to- of terminated wire leads.
board connectors. Refer to The machine combines
page 88 to determine the state of the art technology
applicable connectors. to process single and
double wire application
utilizing the wire processing
industrys best and most
friendly subsystems and
Crimp Force Monitor (CFM) accessories available to
meet the latest market
requirements for wire lead
production.
The new machine
incorporates a servo-driven,
software-controlled
AMP-O-LECTRIC ST III
terminator and the next
generation System III
Your quality program calls Applicator.
for more than a good See catalog 1654956-5 for
crimping system. It more information.
demands proof - the proof
Application Tooling

you get with the SLE Crimp


Force Monitor. It has high-
resolution piezo-quartz
sensor technology for a
more precise identification
of typical crimping faults. Commercial PRO-CRIMPER III Premium CERTI-CRIMP Straight straight-line die closure, ter-
The monitor features Zone & Hand Tool Action Hand Tool (SAHT) minal locator and support,
Peak Force Analysis, and insulation crimp adjust-
128x128 Dot Matrix, Force ment. TE hand tools also

5 Trigger and Encoder


Proximity Trigger, and
Absolute Force
Measurement for real-time
can be adapted for use with
pneumatic tooling assem-
blies, providing air operated
crimping capabilities.
monitoring of every crimp.
For further details on TE
The CFM can be used with
straight action hand tools,
bench or fully-automatic
request TE Catalog 65780.
machines. Special
TE hand tools are ideal for For more details on TE
applicators are not required.
small production and proto- pneumatic tooling assem-
Sure, you can sample and type applications. They fea- blies, call the TE Technical
Commercial grade hand
test crimp height with a ture ratchet control to help Support Center,
tool for crimping various
micrometer. In fact, thats eliminate partial crimps, 1-800-522-6752.
products. Features ratchet
how you standardize your
control to provide complete
process. But for ongoing
crimp cycle. Accepts both
quality control, testing every
pinned- and shouldered-
crimp, SLE is the choice. Its
style die sets. Locators are
known worldwide, and
provided with pinned-style
meets our standards for a
die sets for proper contact
high performance
and wire positioning, and to
terminating system. Thats
help minimize contact rota-
how you can be sure.
tion and bending during
High quality crimping - with crimping. Approximate
verification - means higher weight 1.3 lb [0.60 kg].
production and productivity.

272
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Application Tooling for Insulation Displacement Crimp (IDC)


Contacts and Connectors
Tooling shown on this page Pistol Grip Manual and
is designed to terminate Air Powered Tools
IDC contacts for various The manual pistol grip tool
AMPMODU wire-to-board features an interchange-
connectors. Refer to page able modular terminating
88 to determine the applica- head which also can be
ble connectors. used in the pneumatic ver-
sion, the Bench Mount
Pneumatic Power Assembly Manual Pistol Grip
and the IDC Electric Power Tool No. 58074-1
Unit. The head terminates Pneumatic Pistol Grip
one unstripped wire per Tool No. 58075-1
cycle and indexes the con-
nector to the next terminat-
ing position. The head
rotates to permit optimum
access to the wiring area.
The Bench Mount Pneumatic
Power Assembly is air actu-
ated with either a foot or
knee switch. This capability
frees the operators hands
for optimum positioning.

Application Tooling
Modular Heads:
58062-1 (for MT connectors)
58336-1 (for MTE connectors)
58395-1 (for Level V IDC connectors)
Bench Mounted Pneumatic Power Assembly
58540-1 (for MTE connectors, discrete No. 58338-1
wire or flat ribbon cable)

IDC Electric Power Unit

Modular Head
This electrically powered
semiautomatic bench
machine is designed for
applying AMPMODU MTE
5
Tool No. 58540-1 and MT connectors to dis-
crete wires. It is portable
and compact and uses
existing pistol grip modular
heads. The heads are easily
interchanged to run different
products. *The IDC Electric
Power Units cycle rate is
IDC Electric Power Unit
No. 931800-1 approximately 7,200 cycles
per hour, with exact produc-
tion rates depending upon
operator dexterity.
Modular Heads:
58062-1 (for MT connectors)
58336-1 (for MTE connectors)

*A tube-fed track assembly, Part No.


856675-1, also can be used with
This modular head tool can MTE Connectors.
be used on any pistol grip
tool. It was designed for dis-
crete wire or flat ribbon cable
applications. Note: All part numbers are RoHS compliant.
273
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Application Tooling for Insulation Displacement Crimp (IDC)


Contacts and Connectors (Continued)
Tooling shown on this page Tube-Fed Ribbon Cable Machine
is designed to terminate
IDC contacts for various
AMPMODU wire-to-board
connectors. Refer to page
88 to determine the appli-
cable connectors.

Tube-Fed Ribbon Cable Machine No. 856002-1

Designed for bench appli- spring-driven unit which


cations, this machine is conveys connectors
pneumatically operated and through the product tube to
controlled by a foot pedal. It the terminating station. The
terminates connectors onto air-operated terminating sta-
end-notched ribbon cable. tion positions and termi-
Application Tooling

*The connectors are sup- nates contacts onto the


plied in strip form and in notched cable. The seating
plastic tubes. The machine station is manually operated
consists of three basic sub- and seats connector hous-
assemblies: a feed track, a ings onto the terminated
terminating station and a contacts.
seating station. The feed
track is a constant force,
*At a rate of 13-25 positions at a time.

5 2700 lb. Power Unit With


Cable Notching Die
Equipped with a cable
notching die an adapter kit,
this fully pneumatic bench
machine provides the 2700 lb
[12 010N] force required for
end-notching ribbon cable.
It features a grooved cable
support plate, a pressure
plate and a cable stop to
facilitate cable alignment
and positioning during the
notching process.
Notching Dies:
854449-1 (for 24-22 AWG
[0.2-0.6 mm2] Wire
854449-2 (for 28-26 AWG
[0.08-0.15 mm2] Wire

2700 lb. Power Unit


No. 312522-1

Note: All part numbers are RoHS compliant.


274
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Application Tooling for Insulation Displacement Crimp (IDC)


Contacts and Connectors (Continued)
Tooling shown on this page CHAMPOMATOR Model 2.5 Terminating Machine No. 354786-(*)
is designed to terminate
IDC contacts for various
AMPMODU wire-to-board
connectors. Refer to page
88 to determine the applica-
ble connectors.

This compact bench and programmed by a *For applicable dash nos.,


machine terminates wires membrane switch key- call the Technical Support
manually sorted from board. It also has an inter- Center: 1-800-522-6752.
multiconductor cables. nal storage capability for For further details, request
Termination sequence may retaining up to 350 cable TE Catalog 82247
include full termination of all assemblies. Connectors
contacts, or selective termi- can be terminated with
nation. Designed for easy either straight or right-angle
programming, the machine wire dress.
is microprocessor controlled

Application Tooling
CHAMPOMATOR Model 3A Terminating Machine No. 761420-(*)

This floor model machine controlled and programmed *For applicable dash nos.,
automatically sorts wires by a touchscreen. It also has call the Technical Support
from multiconductor jack- an internal storage capability Center: 1-800-522-6752.
eted cable and terminates for retaining up to 50 cable For further details, request
them in a user-determined assemblies. Connectors can TE Catalog 82247
sequence; either full termina- be terminated with either
tion of all contacts, or selec- straight or right- angle wire
tive termination. Designed dress. All cable assemblies
for easy programming, the are tested for continuity and
machine is microprocessor shorts.

Note: All part numbers are RoHS compliant.


275
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Technical Documents for Board-to-Board Products


Various technical documents Product Specifications describe technical performance characteristics and verification tests.
are available for your use. They are intended for the Design, Component and Quality Engineers.
PC/104 and PC/104-Plus Connectors Pages 5-12:
108-1956 PC/104 and PC/104-Plus Connector Systems
Receptacle Assemblies and Unshrouded Breakaway Headers, Surface-Mount Pages 109, 110, 185-192:
108-25017 AMPMODU Interconnection System, Two-Piece
108-25022 AMPMODU Mod. IV Interconnection System, Vertical Assemblies
108-25026 AMPMODU Mod. II Interconnection System, Standard Pressure Receptacle
Assembly and Header
Two-Piece Printed Circuit Board Connectors Pages 193-202:
108-16 ACTION PIN Contacts
108-25017 AMPMODU Interconnection System, Two-Piece
108-25027 AMPMODU Mod. II Interconnection System, Short-Point Receptacle Assembly
and Header
Receptacle Assemblies, Horizontal and Vertical Board Mount Pages 168-192:
108-25022 AMPMODU Mod. IV Interconnection System, Vertical Assemblies
108-25026 AMPMODU Mod. II Interconnection System, Standard Pressure Receptacle
Assembly and Header
108-25027 AMPMODU Mod. II Interconnection System, Short-Point Receptacle Assembly
and Header
.025 [0.64] Square Posts, Headers, Accessories and Tooling Pages 92-105, 114-140, 145-153, 163:
108-16 ACTION PIN Contacts
108-25026 AMPMODU Mod. II Interconnection System, Standard Pressure Receptacle
Assembly and Header
Technical Documents

Application Specifications describe requirements for using the product in its intended application,
and/or crimping information. They are intended for the Packaging and Design Engineers and the
Setup person.
PC/104 and PC/104-Plus Connectors Pages 5-12:
114-13021 PC/104 and PC/104-Plus Connectors
Two-Piece Printed Circuit Board Connectors Pages 193-202:
114-9009 AMPMODU Header, Two-Piece, Double Row, Application of
Receptacle Assemblies, Horizontal and Vertical Board Mount Pages 168-192:
114-25018 AMPMODU Mod. II and IV Receptacle Assembly, PC Board Mounted, Vertical,

5 Application of
.025 [0.64] Square Posts, Headers, Accessories and Tooling Pages 92-105, 114-140, 145-153, 163-167:
114-25028 ACTION PIN Contacts with TE Headers, Application
114-13011 AMPMODU .025 and .045 Square Continuous Posts

Instruction Sheets provide instructions for assembling or applying the product. They are intended
for the Manufacturing Assembler or Operator.
PC/104 and PC/104-Plus Connectors Pages 5-12:
408-8502 Future Board Assembly 1424685 for PC/104 and PC/104-Plus Connectors
408-8503 Seating Tool Assembly 1424686 for PC/104 and PC/104-Plus Connectors
408-8504 Pneumatic Seating Tool Assembly 1424930-1 for PC/104 and PC/104-Plus
Connectors
408-8505 Manual Seating Tool Assembly 1424931-1 for PC/104 and PC/104-Plus Connectors
Two-Piece Printed Circuit Board Connectors Pages 193-202:
408-2636 ACTION PIN Contact Rear Insertion/Extraction Tool 265871-7
408-9054 Seating Tools
Receptacle Assemblies, Horizontal and Vertical Board Mount Pages 168-192:
408-7411 Suggestions for Wave Soldering Vertical AMPMODU Receptacles
.025 [0.64] Square Posts, Headers, Accessories and Tooling Pages 92-105, 114-140, 145-153, 163:
408-2636 ACTION PIN Contact Rear Insertion/Extraction Tool 265871-7
408-6944 TE Uninsulated Bandolier Post Insertion Tool 91419-1
408-7977 AMPMODU Double Row, Straight Posts, End Shrouds .100 x .100 [0.64 x 0.64] Centers
408-7878 AMPMODU Header Barrier Inserts
408-9054 ACTION PIN Contact Headers Seating Tool, 91170 Series
408-9707 Tool Kit 314818-1 for Breakaway Headers

Note: All part numbers are RoHS


Handbook Guide to Application of ACTION PIN Contact Connectors
compliant. 5697

276
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Technical Documents for Wire-to-Board Products


Various technical documents Product Specifications describe technical performance characteristics and verification tests.
are available for your use. They are intended for the Design, Component and Quality Engineers.
Locking Clip Contacts and Housings Pages 206-209:
108-36028 Connector, Locking Clip, .025 [0.64] Square, Gold
108-36028-1 Connector, Locking Clip, .025 [0.64] Square, Tin
Mod. IV Wire-Applied Contacts and Housings Pages 210-220:
108-25007 AMPMODU Mod. V Interconnection System, Wire-Applied (High Pressure)
108-25019 AMPMODU Mod. IV Male Connectors
108-25020 AMPMODU Mod. IV Interconnection System, (Standard Pressure)
108-25021 AMPMODU Mod. IV.V Interconnection System, (Intermediate Pressure)
Short-Point Wire-Applied Contacts and Housings Pages 221-224:
108-1472 Short-Point Contacts and Housings
AMPMODU MTE Interconnection System Pages 225-252:
108-25034 AMPMODU MTE Connectors
AMPMODU MT and Shielded MT Interconnection System Pages 255-265:
108-25015 AMPMODU MT Standard Pressure Connectors
108-25018 AMPMODU MT High Pressure Connectors
108-25030 AMPMODU MT Shielding Accessories
AMPMODU Level V, IDC Connectors
108-25028 Interconnection System, Insulation Displacement Connector, IDC Level

Technical Documents
Mini-Tandem Spring Receptacle Contacts Pages 266-269:
108-25031 Tandem Spring Receptacle Contact

Application Specifications describe requirements for using the product in its intended application,
and/or crimping information. They are intended for the Packaging and Design Engineers and the
Setup person.
Locking Clip Contacts and Housings Pages 206-209:
114-25006 Contact, Locking Clip, .025 [0.64] Square, Application of
Mod. IV Wire-Applied Contacts and Housings Pages 210-220:
114-25003 AMPMODU Mod. IV (Standard Pressure), AMPMODU Mod. IV.V (Intermediate
Pressure) and AMPMODU Mod. V (High Pressure) Receptacle Contacts,
5
Application of
114-25016 AMPMODU Mod. IV Crimp Pin Contact
Short-Point Wire-Applied Contacts and Housings Pages 221-224:
114-25038 Short-Point Contacts and Housings
AMPMODU MTE Interconnection System Pages 225-252:
114-25026 AMPMODU MTE Interconnection System
AMPMODU MT and Shielded MT Interconnection System Pages 255-265:
114-25032 AMPMODU MT Interconnection System and Shielding Accessories,
Application of
AMPMODU Level V, IDC Connectors
114-25020 Interconnection System, IDC Level V, Application of
Mini-Tandem Spring Receptacle Contacts Pages 266-269:
114-25021 Tandem Spring Receptacle Contact, Application of

Note: All part numbers are RoHS compliant.


277
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Technical Documents for Wire-to-Board Products (Continued)


Instruction Sheets provide instructions for assembling or applying the product. They are intended
for the Manufacturing Assembler or Operator.
Locking Clip Contacts and Housings Pages 206-209:
408-7604 TE Extraction Tool 91084-1
408-7606 TE Locking Clip Contacts and Connectors
408-7627 TE Hand Crimp Tool 90295-1, 28-30 AWG Wire
408-8547 TE Hand Crimp Tool 91533-1, 22-26 AWG Wire
408-9388 TE Hand Crimp Tool 90431-1, 20 AWG Wire
Mod. IV Wire-Applied Contacts and Housings Pages 210-220:
408-4379 TE PRO-CRIMPER II Hand Tool
408-7935 AMPMODU Receptacle Connectors with Strain Relief/Pull Tabs
408-8547 TE Hand Tool 91516-1, 91517-1 and 91541-1
408-9451 TE Extraction Tool 843473-1 for AMPMODU Wire-Applied Housings 86308
408-9453 TE Extraction Tools 843996 and 843477 for Removing AMPMODU Crimp Snap-In
Receptacle Contacts from Wire-Applied Housings
AMPMODU MTE Interconnection System Pages 225-252:
409-5746 TE Electric Power Unit 931800-1
409-5832 MTE Ribbon Cable Terminator 856002-1
408-6789 TE Pneumatic Pistol Handle 58075-1
408-6790 TE Manual Pistol Handle 58074-1
408-6919 AMPMODU MTE Connectors
408-8547 TE Hand Crimp Tool 91518-1 and 91551-1
Technical Documents

408-9230 TE Keying Tool 91417-1


408-9359 MTE Modular Terminating Head 58336-1
408-9393 TE Pneumatic Bench Assy. 58338-1
408-9407 TE Hand Crimp Tool 91531-1 and 58342-2
408-9453 TE Extraction Tools 843996 and 843477 for Removing AMPMODU Crimp Snap-In
Receptacle Contacts from Wire-Applied Housings
408-9515 Ribbon Cable Notcher 854449-[]
AMPMODU MT and Shielded MT Interconnection System Pages 255-265:
408-6532 AMPMODU MT Connectors

5 AMPMODU Level V, IDC Connectors


408-6843 TE Extraction Tool 91409-1
Standard Tandem Spring and Mini-Tandem Spring Receptacle Contacts Pages 266-269:
408-7909 TE Hand Crimping Tool 91540-1

Note: All part numbers are RoHS compliant.


278
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Level V IDC Connectors, .125 x .125 [3.18 x 3.18] Centerline

Product Facts
Termination of discrete
wire sizes 26-22 AWG
[0.12-0.3 mm2] as well as
jacketed cable and bonded
ribbon cable (conductors
separated)
Connectors stackable end-
to-end and side-to-side on
.125 [3.18] centers
Connectors preloaded with
insulation displacement
receptacle contacts
Contact design employs
dual cantilever beams,
redundant insulation
displacement slots, built-in
post stop and wire support
crimp
Copper alloy contacts are
duplex plated
Snap-on covers with or
without cable tie paddles
Full line of mass
termination tooling offers
lowest installed costs for AMPMODU Level V IDC Covers can be furnished
most production needs
Performance
connectors provide cost with and without a cable tie Characteristics
Recognized under the effective discrete wire paddle. The covers are
Component Program of connections that are simply snapped onto a Contact Current Rating

.125 [3.18] x .125 [3.18]


3 amperes
Underwriters compatible with today's housing after the connector
Laboratories Inc., telecommunications has been terminated. Termination Resistance
R
12 milliohms (max.)

Centerline
File No. E28476 packaging techniques. The receptacle contacts
These connectors are Durability Ref. Product
Certified by Canadian feature the TE insulation Specification 108-25028
Standards designed to mate with .025 displacement crimp (Interconnection System, Insulation
Association,
R [0.64] sq. posts on .125 x technique for achieving top Displacement Connector, IDC Level)
File No. LR 7189 .125 [3.18 x 3.18] centers quality, low cost
and are comprised of terminations. These Application Specification
double-row housings contacts employ dual 114-25020 (Interconnection System,
preloaded with insulation cantilever beams for IDC Level V, Application of)
displacement receptacle
contacts, snap-on
hermaphroditic covers, and
a full line of mass termination
redundant interface with a
mating post, an integral
post stop to limit post
mating depth and protect
6
tooling to meet virtually the crimp termination, and
every production need. For a wire support (strain relief)
modular flexibility, connectors crimp to prevent accidental
can be stacked end-to-end wire pull-out. The contacts
or side-to-side, maintaining are made of high
a .125 x .125 [3.18 x 3.18] conductivity copper alloy
centerline spacing. and are duplex plated.

279
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Receptacle Assemblies, Double-Row, .125 x .125 [3.18 x 3.18] Centerline

Housings Preloaded with


Insulation Displacement
Crimp Receptacle Contacts

.800
[20.32]

Material and Finish .298


[7.57]
Housing Black thermoplastic, flame
retardant
Contacts Copper alloy, duplex
plated .000050 [0.00127] gold on A
contact area, .000100 [0.00254] min.
tin in crimp area, with entire contact
underplated .000050 [0.00127] nickel

Note: Preloaded contacts accept max. .059


B
insulation dia. of .050 [1.27]. The mini- [1.50]
mum point of contact, as measured from
front edge of housing, is .095 [2.41]. .243
[6.17]

Technical Documents .125


pages 277, 278 [3.18] .125
Typ.
[3.18]
Product Specification
108-25028
Application Specification
.125 [3.18] x .125 [3.18]

114-25020
Centerline

Receptacle assemblies can be


stacked end-to-end and side-to-
side on .125 x .125 [3.18 x 3.18]
centers.

Dimensions Receptacle Assembly (Stamped1)


No. of for 26-22 AWG
Pos. A B [0.12-0.3 mm2] Wire
8 .493 [12.52] .375 [9.52] 102935-4

6 10
12
16
20
.618 [15.70]
.743 [18.87]
.993 [25.22]
1.243 [31.57]
.500 [12.70]
.625 [15.88]
.875 [22.23]
1.125 [28.58]
102935-6
102935-8
1-102935-2
1-102935-6
24 1.493 [37.92] 1.375 [34.93] 1-102935-9
30 1.868 [47.45] 1.750 [44.45] 1-102935-3
32 1.993 [50.62] 1.875 [47.63] 2-102935-8
40 2.493 [63.32] 2.375 [60.33] 3-102935-6
White ink stamped, one side8- thru 12-position with AMP and arrow; 14- and 16-position with AMP, part no., and
1

arrow; 18- thru 40-position with AMP, part no., date code and arrow.
Notes: 1. Covers for these housings are shown on pages 281 & 282.
2. Termination tooling for these connectors are shown on page 273-275.
3. 14- and 18-position receptacle assemblies, as well as other sizes, can be made available upon request.
Consult TE.

Note: All part numbers are RoHS compliant.


280
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Hermaphroditic Covers for Level V IDC Receptacle Assemblies,


Double-Row, .125 x .125 [3.18 x 3.18] Centerline
All covers illustrated here
and on the following page
can be used on the double- .603 .603
row Level V IDC connectors [15.32] [15.32]
shown on page 280. .125 .125
[3.18] [3.18]
Typ. Typ.
Material
Black thermoplastic, flame retardant,
94V-0 rated A A

Cover 103056 Series Cover 103058 Series


without Cable Tie Paddle with Cable Tie Paddle

.100
[2.54]
(2 Plc.)
Cable Tie Cable Tie
Paddle Paddle
C

.605 .605
[15.37] B [15.37]
.125
[3.18]
.125 Typ.
Typ.
[3.18]

D
1.105
[28.07]

.125 [3.18] x .125 [3.18]


A A

Centerline
Cover 103349 Series Cover 103350 Series
with Wide Cable Tie Paddle with Wide Cable Tie Paddle
and Polarization

Cover Part Nos.

6
No. of Dimensions
Pos. Without With With Wide With Wide
(Housing Cable Tie Cable Tie Cable Tie Cable Tie
Size) A B C D E Paddle Paddle Paddle Paddle and
Polarization
8 .491 [12.47] .150 [3.81] .285 [7.24] .166 [4.22] .125 [3.18] 103349-4 103350-4
10 .616 [15.65] .125 [3.18] 103058-3
12 .741 [18.82] .200 [5.08] 103058-4
16 .991 [25.17] .300 [7.62] .592 [15.04] .416 [10.57] 103349-1 103350-1
20 1.241 [31.52] .300 [7.62] .592 [15.04] .541 [13.74] 103349-5 103350-5
24 1.491 [37.87] .400 [10.16] 1-103056-0 1-103058-0
32 1.991 [50.57] .600 [15.24] 1.312 [33.32] .916 [23.27] 103349-2 103350-2
40 2.491 [63.27] .750 [19.05] 1.820 [46.23] 1.166 [29.61] 103349-3 103350-3
64 See page 282 for Double Cable Tie Paddle versions.
Notes: 1. Two hermaphroditic covers of any style can be installed on a double-row connector housing.
2. Other sizes can be made available upon request.

Note: All part numbers are RoHS compliant.


281
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Hermaphroditic Covers for Level V IDC Receptacle Assemblies,


Double-Row, .125 x .125 [3.18 x 3.18] Centerline (Continued)

.100
[2.54]
Typ.
1.312
Typ.
[33.32]
.603
[15.32]

.125
Typ.
[3.18] .600
Typ.
[15.24]

Cable Tie Paddle

3.991
[101.37]

1.103
[28.02]
Cover Part No. 104583-1, 64-Position
with Double Cable Tie Paddle
.125 [3.18] x .125 [3.18]

.100
[2.54]
Centerline

Typ.
1.312
Typ.
[33.32]
.603
[15.32]

.125
Typ.
[3.18] .600
Typ.
[15.24]

6 .916
[23.27]
Cable Tie Paddle

3.991
[101.37]

1.103
Cover Part No. 104584-1, 64-Position [28.02]
with Double Cable Tie Paddle
and Polarization

Note: All part numbers are RoHS compliant.


282
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

AMPMODU .031 x .062 [0.79 x 1.57] Interconnection System

Product Facts
Rugged connector system
featuring .031 x .062
[0.79 x 1.57] posts with
mating receptacles
Current rating 5 amps max
per contact. Varies due to
ambient temperature, wire
size and duty cycles.
Available for board-to-board
and wire-to-board
applications
Posts available on strip
for machine application
directly to pc board or in
housings for board
mounting
Receptacles available for
board mounting or wire
crimping
Contacts available in both
tin and gold plating
Flame retardant
thermoplastic housings
94V-0 rated
Locking Clip contacts
available to mate with
.031 x .062 [0.79 x 1.57]
posts
Recognized under the The .031 x .062 [0.79 x 1.57] capabilities. Machine configurations do not
Component Program of interconnection system applied terminations, lend themselves to the
Underwriters has served as an industry through matched economies of assemblies,
Laboratories Inc., R
standard for modular application equipment, TE can provide for the
File No. E28476 packaging for over three are geared to virtually any discrete location of
decades. It is a rugged, production requirement, individual posts and
Certified by Canadian large scale system assuring the lowest possible receptacles.
Standards designed for board-to-board applied cost.

Interconnection System
Association, If your interconnections

Mod I 0.031 x 0.062


R

and board-to-wire or cable Crimp snap-in receptacles require Top Entry, Bottom
File No. LR 16455 applications that has offered for 26-18 AWG [0.12 Entry and/or Side Entry for
millions of reliable 0.9mm2] wire provide perpendicular, parallel and
interconnections and excellent discrete wire stacked configurations, the
countless mating cycles. terminations. Housings for .031 x .062 [0.79 x 1.57]
This versatile interconnection these contacts provide for interconnection system can
system successfully meets ease of handling fulfill your needs with the
the requirements for most terminations in high density lowest applied cost through
modular power supply applications. efficient interconnections
packaging.
Board mounted receptacles
and receptacle assemblies
are available in various
AMPMODU mating posts
are supplied typically as
header assemblies. They are
available in various sizes to
and supporting application
equipment.
7
geometries, offering meet the interconnection
packaging interconnections and packaging requirements
that include perpendicular, of your system. However, in
parallel and stacking instances where packaging

283
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

AMPMODU .031 x .062 [0.79 x 1.57] Interconnection System (Continued)


Locking Clip
Contacts
(Page 298)

Standard Profile Locking Clip


Housing, Unkeyed Connector
for Crimp Snap-In (Page 299)
Receptacles
(Page 291 & 292) Header, Right-Angle
Post, Keyed
(Page 297)
Board Mount
Receptacles,
Horizontal
and Vertical
Styles
(Pages 285 & 286)

Straight Posts
Machine Applied Board Mount
(Page 294) Receptacle
Straight Posts Assembly,
Machine Applied Vertical
(Page 294) (Page 287)
Header, Straight Post
(Pages 295 & 296)

Header, Right-Angle
Board Mount Post, Keyed
Receptacle (Page 297)
Low Profile
Assembly, Housing, Keyed
Header, Right-Angle
Horizontal (Page 293)
Post, Keyed
(Pages 288 & 289)
(Page 297)

Receptacles,
Crimp Snap-In
(Page 290)

Rugged-self supporting, one-


The AMPMODU receptacle This design also permits
Interconnection System

piece contact body


Mod I 0.031 x 0.062

cross-section is primarily the use of the receptacles


Wide entry for post to rectangular, with rounded without housings or
receptacle
misalignment corners. Two integral encapsulation.
cantilever beams contact
the mating square or
rectangular posts. Note: Application of a
Deflection of these spring contact lubricant is part of
Reliability-dual
cantilever spring members is limited by anti- the manufacturing process
contact design overstress and excessive of all AMPMODU tin-plated
and built-in
permanent deformation is crimp products. However,

7
anti-overstress
prevented. This feature it is not part of the
Offers high or low allows a wide range of manufacturing process of Insulation Support
contact forces tolerances for misalignment Barrel
products that customers will
Wide of mating contacts. solder, then clean. For these
Cantilever Misalignment The configuration of the products, TE recommends
Beams Tolerance
receptacle completely that customers purchase a
encloses the spring contact lubricant. (See
members preventing application specification
damage during handling 114-25004 for further
and assembly and makes information.)
Anti-overstress the system compatible with Wire Crimp Receptacle
automatic application
techniques.
284
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Mod I Receptacles, Board Mount, .031 x .062 [0.79 x 1.57] Centerline

Vertical and Horizontal Receptacle Styles


Board Mount .093
[0.99] Max. .093
[0.99] Max.

.125 .125
[3.18] Max. [3.18] Max.

.300
[7.62] .300
[7.62]

Bottom
Post Entry
Type A
.093
[2.36] Max.
Top
Post Entry
Type B

.125
[3.18] Max.

.300
[7.62]

Horizontal
Post Entry
Type C

Related Product Data Recommended Board Layout for Receptacle Assemblies


Recommended Board Layout for and Individual Receptacles (Type A and B)
Type C page 288
Mates with
Machine Applied Posts page 294 .003
2J [0.08]
Headers pages 295-297

Mod I Receptacles,
.100
.003
Application Tooling J [0.08] [2.54] Min.

Board Mount
pages 300-304
Performance Specifications
page 305
Technical Documents
.055
page 305 [1.40]
Min.
.125.002
[3.180.05]
.125
Keying Plug [3.18]

Round Hole
(Post Entry Type A or B)
7
J-Receptacle centers may vary depending on requirements. For individual receptacles, minimum nominal centerline
spacing between adjacent receptacles is .150 [3.81]; for receptacle assemblies, centerline spacing between adjacent
receptacles is .156 [3.96]. The .003 [0.08] tolerances are not to accumulate over length of board. For solder mask, see
Part No. 86181-2 TE Instruction Sheet 408-7411.
Use in Board Mount Receptacles
Note: Drawings depict normal use of the contact in a one or two-sided circuit board. When using plated thru-holes,
refer to TE Engineering Report ER-001 and TE Instruction Sheet 408-7411. For solder mask, see TE Instruction Sheet
408-7411.
Note: All part numbers are RoHS compliant.
285
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Mod I Receptacles, Board Mount, .031 x .062 [0.79 x 1.57] Centerline (Continued)
Material and Finish
Copper alloy, plated as follows:
Plating A Selectively plated .210
[5.33] .010
.000030 [0.00076] gold on contact area, [0.25] .020
Max. .210 [0.51]
with gold flash over .000050 [0.00127] [5.33] Max.
nickel on entire contact
Plating B .000079 [0.00201] min.
tin on entire contact
Plating C (Solder Resist)
.000030 [0.00076] gold over .000050 Standard Pressure High Pressure
[0.00127] nickel on contact area, Receptacle Receptacle
.000500 [0.01270] aluminum on inside
area of solder tines; remainder of contact
unfinished

Board Dimension Standard Pressure High Pressure Insertion


Type Thickness T Finish Part Nos. Part Nos. Applicator No. for
Range (Ref. Pg. 285 ) Strip Form Loose Piece Strip Form Loose Piece U Frame Machine
Plating A 86477-2 86480-2 466376-1
A .070-.055 [1.78-1.40] .112 [2.84] Plating B 86477-3 87316-3 466376-1
Plating C (Solder Resist) 87772-2 466376-1
Plating A 87003-1 87105-1 466376-1
B .070-.055 [1.78-1.40] .112 [2.84] Plating B 87003-2 466376-1
Plating C (Solder Resist) 87774-2 466376-1
Plating A 85487-4 85493-4 86432-8 86434-6
C .103-.055 [2.62-1.40] .145 [3.68] 565967-3
Plating B 85487-3 86432-1 86434-1
Notes: 1. All strip form parts in packaged quantities of 5,000 each.
2. All loose piece parts in packaged quantities of 500 each.
Mod I Receptacles,
Board Mount

Note: All part numbers are RoHS compliant.


286
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Mod I Receptacle Assemblies, Vertical Board Mount,


.031 x .062 [0.79 x 1.57] Centerline
.046
Single Row .156 [3.96] [1.17]
Contact
Centerline Area

.182 .018
[4.62] [0.46]

The letter A
stamped on
contact indicates
mating end of
receptacle.
X-X

B .015
[0.38]

Material and Finish A


Housing Black thermoplastic, 94V-0
rated .156
Typ.
[3.96]
Contacts Copper alloy, plated as
follows:
Plating A Selectively plated
.000030 [0.00076] gold on contact area, .175.007
with gold flash over .000050 [0.00127] [4.450.18]
nickel on entire contact
Plating B .000079 [0.00201] min. +.010
tin on entire contact .112-.000 .300.003
X X +0.25 [7.620.08]
Plating C (Solder Resist) [2.840.00]
.000030 [0.00076] gold over .000050
[0.00127] nickel on contact area, No. Type A Type B
Dimensions
.000500 [0.01270] aluminum on inside of Standard Pressure High Pressure Standard Pressure
Pos. A B
area of solder tines; remainder of contact Plating A Plating B Plating C Plating B Plating A Plating B Plating C
unfinished 2 .156 [3.96] .312 [7.92] 87984-2 87983-2 87989-2 87993-2 87986-2 87985-2 87990-2
3 .312 [7.92] .468 [11.89] 87984-3 87983-3 87989-3 87993-3 87986-3 87985-3 87990-3
4 .468 [11.89] .624 [15.85] 87984-4 87983-4 87989-4 87993-4 87986-4 87985-4 87990-4
5 .624 [15.85] .780 [19.81] 87984-5 87983-5 87989-5 87993-5 87986-5 87985-5 87990-5
6 .780 [19.81] .936 [23.77] 87984-6 87983-6 87989-6 87993-6 87986-6 87985-6 87990-6
Related Product Data 7 .936 [23.77] 1.092 [27.74] 87984-7 87983-7 87989-7 87993-7 87986-7 87985-7 87990-7
Recommended Board Layout 8 1.092 [27.74] 1.248 [31.70] 87984-8 87983-8 87989-8 87993-8 87986-8 87985-8 87990-8
page 288 9 1.248 [31.70] 1.404 [35.66] 87984-9 87983-9 87989-9 87993-9 87986-9 87985-9 87990-9
Mates with 10 1.404 [35.66] 1.560 [39.62] 1-87984-0 1-87983-0 1-87989-0 1-87993-0 1-87986-0 1-87985-0 1-87990-0

Vertical Board Mount


11 1.560 [39.62 1.716 [43.59] 1-87984-1 1-87983-1 1-87989-1 1-87993-1 1-87986-1 1-87985-1 1-87990-1

Mod I Receptacles,
Machine Applied Posts page 294
Headers pages 295-297 12 1.716 [43.59] 1.872 [47.55] 1-87984-2 1-87983-2 1-87989-2 1-87993-2 1-87986-2 1-87985-2 1-87990-2
13 1.872 [47.55] 2.028 [51.51] 1-87984-3 1-87983-3 1-87989-3 1-87993-3 1-87986-3 1-87985-3 1-87990-3
Performance Specifications
page 305 14 2.028 [51.51] 2.184 [55.47] 1-87984-4 1-87983-4 1-87989-4 1-87993-4 1-87986-4 1-87985-4 1-87990-4
15 2.184 [55.47] 2.340 [59.44] 1-87984-5 1-87983-5 1-87989-5 1-87993-5 1-87986-5 1-87985-5 1-87990-5
Technical Documents 16 2.340 [59.44] 2.496 [63.40] 1-87984-6 1-87983-6 1-87989-6 1-87993-6 1-87986-6 1-87985-6 1-87990-6
page 305 17 2.496 [63.40] 2.652 [67.36] 1-87984-7 1-87983-7 1-87989-7 1-87993-7 1-87986-7 1-87985-7 1-87990-7
18 2.652 [67.36] 2.808 [71.32] 1-87984-8 1-87983-8 1-87989-8 1-87993-8 1-87986-8 1-87985-8 1-87990-8
19 2.808 [71.32] 2.964 [75.29] 1-87984-9 1-87983-9 1-87989-9 1-87993-9 1-87986-9 1-87985-9 1-87990-9
20 2.964 [75.29] 3.120 [79.25] 2-87984-0 2-87983-0 2-87989-0 2-87993-0 2-87986-0 2-87985-0 2-87990-0

Keying Plug 7

Part No. 86181-2 Post Entry Post Entry


(Use in Board Mount Type A Type B
Receptacles)
Note: All part numbers are RoHS compliant.
287
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Mod I Receptacle Assemblies, Horizontal Board Mount,


.031 x .062 [0.79 x 1.57] Centerline
Single Row .156 [3.96] .018
.046
Centers [1.17]
[0.46]

Contact
Area
Material and Finish
Housing Black thermoplastic, 94V-0 .182
rated [4.62]

Contacts Copper alloy, plated as


follows: The letter A stamped
X-X
Plating A Selectively plated on contact indicates
mating end of recep-
.000030 [0.00076] gold contact area, tacle.
with gold flash over .000050 [0.00127]
B .015
nickel on entire contact [0.38]
Plating B .000079 [0.00201] min.
tin on entire contact A

.156 .333.010
[3.96] Typ. .145 [8.460.25]
[3.68]

Post Entry
Type C

.175.007
[4.450.18]
Related Product Data
Mates with
Machine Applied Posts page 294
Headers pages 295-297 .300.003
X X [7.620.08]
Performance Specifications
page 305
Technical Documents
page 305

.003
2H [0.08] .003
.003 .003
.003 2H [0.08] 2H [0.08] H [0.08]
Recommended Board H [0.08] .003
H [0.08] .100
Layouts for Receptacle .055.005
[1.400.13]
[2.54]
Max.
Assemblies and Individual +.005
Receptacles (Type C) +.005 +.005
.340 [-.000 ]
.340 [ -.000 ] .340 [ -.000 ]
Horizontal Board Mount

[8.64+0.13]
Mod I Receptacles,

[8.64+0.13] [8.64+0.13]

.073.003 .073.003 .073.003


[1.850.08] [1.850.08] [1.850.08]
Typ. Dia. Typ. Dia. Typ. Dia.

This configuration recommended This configuration recommended This configuration recommended


for use with machine applied posts for use with machine applied posts for use with machine applied posts
or headers with a .405 [10.29] or headers with a .345 [18.76] or headers with a .500 [12.70]

7
minimum mating end post length.* minimum mating end post length.* minimum mating end post length.*

Keying Plug The mating post length is depicted by the A dimension on page 294 (machine applied posts) and the C dimension on
pages 295-297 (headers).

H-Receptacle centers may vary depending on requirements. For individual receptacles, minimum nominal centerline
spacing between adjacent receptacles is .125 [3.18] for receptacle assemblies, centerline spacing between adjacent
receptacles is .156 [3.96]. The .003 [0.08] tolerances are not to accumulate over length of board.

Part No. 86181-2


(Use in Board Mount
Receptacles)
Note: All part numbers are RoHS compliant.
288
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Mod I Receptacle Assemblies, Horizontal Board Mount,


.031 x .062 [0.79 x 1.57] Centerline (Continued)

No. of Dimensions Standard Pressure High Pressure


Pos. A B Plating A Plating B Plating B
2 .156 [3.96] .312 [7.92] 87988-2 87987-2 87995-2
3 .312 [7.92] .468 [11.89] 87988-3 87987-3 87995-3
4 .468 [11.89] .624 [15.85] 87988-4 87987-4 87995-4
5 .624 [15.85] .780 [19.81] 87988-5 87987-5 87995-5
6 .780 [19.81] .936 [23.77] 87988-6 87987-6 87995-6
7 .936 [23.77] 1.092 [27.74] 87988-7 87987-7 87995-7
8 1.092 [27.74] 1.248 [31.70] 87988-8 87987-8 87995-8
9 1.248 [31.70] 1.404 [35.66] 87988-9 87987-9 87995-9
10 1.404 [35.66] 1.560 [39.62] 1-87988-0 1-87987-0 1-87995-0
11 1.560 [39.62] 1.716 [43.59] 1-87988-1 1-87987-1 1-87995-1
12 1.716 [43.59] 1.872 [47.55] 1-87988-2 1-87987-2 1-87995-2
13 1.872 [47.54] 2.028 [51.51] 1-87988-3 1-87987-3 1-87995-3
14 2.028 [51.51] 2.184 [55.47] 1-87988-4 1-87987-4 1-87995-4
15 2.184 [55.47] 2.340 [59.44] 1-87988-5 1-87987-5 1-87995-5
16 2.340 [59.44] 2.496 [63.40] 1-87988-6 1-87987-6 1-87995-6
17 2.496 [63.40] 2.652 [67.36] 1-87988-7 1-87987-7 1-87995-7
18 2.652 [67.36] 2.808 [71.32] 1-87988-8 1-87987-8 1-87995-8
19 2.808 [71.32] 2.964 [75.29] 1-87988-9 1-87987-9 1-87995-9
20 2.964 [75.29] 3.120 [79.25] 2-87988-0 2-87987-0 2-87995-0

Horizontal Board Mount


Mod I Receptacles,

Note: All part numbers are RoHS compliant.


289
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Mod I Receptacles, Crimp Snap-In (Wire Applied),


.031 x .062 [0.79 x 1.57] Centerline
Material and Finish
Copper alloy, plated as follows:
Plating A Selectively plated
.000030 [0.00076] gold on contact area,
with gold flash over .000050 [0.00127]
nickel on entire contact
Plating B .000016 [0.00041] min.
tin on entire contact
Related Product Data
Housings used in pages 291-293
Mate with Machine Applied .125
[3.18] Max.
Posts page 294
Headers pages 295-297
.580
Application Tooling page 300-304 .280 [14.73]
Performance Specification [7.11]
page 305
Technical Documents .093
page 305 [2.36]
Max.
.014
[0.36] Standard Pressure
Max. Wire Size Range Ins. Dia. Strip Form Loose Piece
Finish
AWG [mm2] Range Packaged Part Packaged Part
Quantities Nos. Quantities Nos.
Plating A 5,000 102099-2 500 102103-2
22-18 [0.3-0.9] .051-.090 [1.302.29]
Plating B 5,000 102099-5 500 102103-3
.210
[5.33]
Applicator (Standard Pressure) Premium
Wire Size Range CERTI-CRIMP
AWG [mm2] Part Type Used With Hand Tool
Number Machine
Part Number
466764-3 HDM Model "G" (AMP-O-LECTRIC)
Standard Pressure
22-18 466764-2 HDM Model "K" (AMP-O-LECTRIC)
Receptacle 90274-2
[0.3-0.9] 466764-1 HDM CLS IV+ (AMPOMATOR)
466937-1 SCA Stripper-Crimper (AMP-O-MATIC)
AMP-O-LECTRIC KII Machine. Applicators also available for AMPOMATOR Lead Making Machines and
Stripper/Crimper Machines. Consult TE.

.020
[0.51]
Mod I Receptacles,

Max.
Crimp Snap-In

High Pressure
Wire Size Range Ins. Dia. Strip Form Loose Piece
Finish
AWG [mm2] Range Packaged Part Packaged Part
Quantities Nos. Quantities Nos.
Plating A 5,000 102100-2 500 102104-2
22-18 [0.3-0.9] .051-.090 [1.302.29]
.210 Plating B 5,000 102100-5 500 102104-3
[5.33]
Plating A 5,000 102102-2 500 102106-2
26-22 [0.12-0.4] 0.42-.073 [1.07-1.85]
Plating B 5,000 102102-5 500 102106-3

7 High Pressure Receptacle Wire Size Range


AWG [mm2] Part
Number
Applicator (High Pressure)

Type Used With


Machine
Premium
CERTI-CRIMP
Hand Tool
Part Number
466764-3 HDM Model "G" (AMP-O-LECTRIC)
22-18 [0.3-0.9] 466764-2 HDM Model "K" (AMP-O-LECTRIC) 90274-2
466764-1 HDM CLS IV+ (AMPOMATOR)
466937-1 SCA Stripper-Crimper (AMP-O-MATIC)
26-22 [0.12-0.4] 466763-2 HDM Model "K" (AMP-O-LECTRIC) 90328-1
466763-1 HDM CLS IV+ (AMPOMATOR)
AMP-O-LECTRIC KII Machine. Applicators also available for AMPOMATOR Lead Making Machines and
Stripper/Crimper Machines. Consult TE.
Extraction Tool Part No. 843473-1
Part Instruction Sheet 408-9451 Note: All part numbers are RoHS compliant.
290
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Mod I Receptacle Housings, Standard Profile, Unkeyed,


.031 x .062 [0.79 x 1.57] Centerline
Single Row, .156 [3.96]
Centers, Without Strain
Relief
.030.010 Identifiers on ends of
[0.760.25] housing are optional at
AMPs discretion

.790
[20.07]

.015
L [0.38]
Material
Black thermoplastic, flame retardant, .077
94V-0 rated [1.96] .120
.250 Y [3.05] Typ.
[6.35] Max.

Related Product Data


Contacts used with page 290
Mate with
Y Locking Ledge
Machine Applied Posts page 294 .156 Identification
Headers pages 295-297 [3.96] Typ.

Performance Specifications Y-Y


.156.003 .003
page 305 A spaces @ [3.960.08] = B [0.08]

Technical Documents
page 305

No. of Dimensions Housing Part Nos.


Pos. A B L Stamped1 Unstamped2
2 1 .156 [3.96] .312 [7.92] 2-87025-5
3 2 .312 [7.92] .468 [11.89] 2-87025-1
4 3 .468 [11.89] .624 [15.85] 1-87025-3
5 4 .624 [15.85] .780 [19.81] 2-87025-3

Mod I Receptacle
6 5 .780 [19.81] .936 [23.77] 87025-1 87025-2
7 6 .936 [23.77] 1.092 [27.74] 3-87025-4

Housings
8 7 1.092 [27.74] 1.248 [31.70] 1-87025-6
9 8 1.248 [31.70] 1.404 [35.66] 87025-9 1-87025-0
10 9 1.404 [35.66] 1.560 [39.62] 1-87025-7 1-87025-8
11 10 1.560 [39.62] 1.716 [43.59] 3-87025-6
12 11 1.716 [43.59] 1.872 [47.55] 1-87025-1 1-87025-2
13 12 1.872 [47.55] 2.028 [51.51] 3-87025-0
14 13 2.028 [51.51] 2.184 [55.47] 3-87025-8

7
15 14 2.184 [55.47] 2.340 [59.44] 3-87025-2
16 15 2.340 [59.44] 2.496 [63.40] 2-87025-0
17 16 2.496 [63.40] 2.652 [67.36] 4-87025-0
18 17 2.652 [67.36] 2.808 [71.32] 87025-4
19 18 2.808 [71.32] 2.964 [75.29] 87025-6
20 19 2.964 [75.29] 3.120 [79.25] 87025-8
25 24 3.744 [95.10] 3.900 [99.06] 5-87025-0
Notes: 1Markings on housing.
2No markings on housing.

Note: All part numbers are RoHS compliant.


291
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Mod I Receptacle Housings, Standard Profile, Unkeyed,


.031 x .062 [0.79 x 1.57] Centerline (Continued)
Single Row, .156 [3.96]
Centers, With Strain Relief

.992 .290
[25.20] [7.37]
.206.020 .694 .040
[5.230.51] [17.63] [1.02]

.397
[10.08] .094
[2.39] Dia.
.446 4 Plc.
.843
[11.33] .298 [7.57] [21.41]

Material
Black thermoplastic, flame retardant,
94V-0 rated
1.640
[41.66]
Related Product Data
Contacts used with page 290
Mate with
Machine Applied Posts page 294
Headers pages 295-297
Performance Specifications 1.560
page 305 [39.62]

Technical Documents 10 Position Receptacle Housing, Part No. 1-102090-0


page 305
Mod I Receptacle
Housings

Note: All part numbers are RoHS compliant.


292
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Mod I Receptacle Housings, Low Profile, Keyed,


.031 x .062 [0.79 x 1.57] Centerline
Locking Ledge
Single Row, .156 [3.96] Identifiers on ends of
housing are optional at Identification
Centers .030.010
[0.760.25]
AMPs discretion

.640
[16.26]

.125 .075 .040


[3.18] [1.91] Typ. [1.02]

.015
L [0.38]

.077
[1.96]
Material
Black thermoplastic, flame retardant, .250
[6.35] Max.
94V-0 rated .120
[3.05] Typ.
.156
Related Product Data [3.96] Typ.

Contacts used with page 290 .156.003 .003


A spaces @ [3.960.08] = B [0.08]
Mate with
Headers pages 295-297
No. of Dimensions No. of Housing Part Nos. Key
Performance Specifications Pos. Keys (Unstamped)1 Locations
A B L
page 305
2 1 .156 [3.96] .312 [7.92] 1 87159-3 A
3 2 .312 [7.92] .468 [11.89] 1 87159-4 A
Technical Documents 4 3 .468 [11.89] .624 [15.85] 2 87159-5 A,C
page 305
5 4 .624 [15.85] .780 [19.81] 2 87159-1 A,D
6 5 .780 [19.81] .936 [23.77] 3 87159-6 A,C,E
7 6 .936 [23.77] 1.092 [27.74] 3 87159-7 A,C,E
8 7 1.092 [27.74] 1.248 [31.70] 4 87159-8 A,C,E,G
9 8 1.248 [31.70] 1.404 [35.66] 3 87159-9 A,D,G
10 9 1.404 [35.66] 1.560 [39.62] 5 1-87159-0 A,C,E,G,J
11 10 1.560 [39.62] 1.716 [43.59] 4 1-87159-1 A,D,G,K
12 11 1.716 [43.59] 1.872 [47.55] 6 1-87159-2 A,C,E,G,J,L
13 12 1.872 [47.55] 2.028 [51.51] 4 87159-2 A,D,J,M
14 13 2.028 [51.51] 2.184 [55.47] 7 1-87159-3 A,C,E,G,J,L,N
15 14 2.184 [55.47] 2.340 [59.44] 5 1-87159-4 A,D,G,K,N

Mod I Receptacle
16 15 2.340 [59.44] 2.496 [63.40] 8 1-87159-5 A,C,E,G,J,L,N,Q
17 16 2.496 [63.40] 2.652 [67.36] 6 1-87159-6 A,D,G,K,N,R

Housings
18 17 2.652 [67.36] 2.808 [71.32] 6 1-87159-7 A,D,F,J,P,S
19 18 2.808 [71.32] 2.964 [75.29] 8 1-87159-8 B,D,F,J,L,N,Q,S
20 19 2.964 [75.29] 3.120 [79.25] 10 1-87159-9 A,C,E,G,J,L,N,Q,S,U
25 24 3.744 [95.10] 3.900 [99.06] 11 2-87159-4 A,C,E,H,K,M,Q,S,U,W,Y
1No marking on housing.

Keying Plug Keying Plug References


Material Natural Color Nylon

.050
Wire Exit Face Wire Exit Face
.160
[4.06]
7
[1.27]

Fits
through
.125 [3.18] Keying Plug Keying Plug
Dia. Hole 87116-2 87116-2
Post Post
(Flush) (Flush)
Mating Face Mating Face

Part No. 87116-2 For Standard Housings For Low Profile Housings

Note: All part numbers are RoHS compliant.


293
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Mod I Posts, Machine Applied, .031 x .062 [0.79 x 1.57] Centerline

Straight Posts
.150 Cut Off
[3.81]
.062 .003
2D
[1.57] [0.08]
.003
D [0.08]
.150
[3.81]

E
.080
.048 [2.03]
[1.22]
A B
.078.002 Dia.
Typical Assembly [1.980.05]
.031 (Drilled Hole)
C
[0.78]

Material and Finish Recommended Mounting Holes


Brass, plated .000030 [0.00076] gold
over .000050 [0.00127] nickel on entire
post

Related Product Data


Mate with
Board Mount Receptacles DPost centers may vary depending on requirements. Minimum nominal
pages 285, 286 centerline spacing between adjacent contacts is .125 [3.18]; .003 [0.08]
Board Mount Receptacle tolerances not to accumulate over length of board.
EPost center location from edge of board may vary to satisfy application.
Assemblies pages 287-289
Crimp Snap-In Receptacles and
Housings pages 290-292
Locking Clip Contacts &
Housings pages 298, 299 (see page Dimensions Finish Part Nos.
298 for recommended post length). A B C Strip Form1 Loose Piece2
Application Tooling .360 [9.14] .187 [4.75] .595 [15.11] Plating A 86147-7 86182-7
pages 300-304 Plating B 5086147-2 5086182-2
Performance Specifications .380 [9.65] .320 [8.13] .748 [19.00] Plating A 1-86147-5 1-86182-5
page 305 Plating B 5086147-9 5086182-9
Plating A 4-86147-2 2-86182-9
.400 [10.16] .125 [3.18] .573 [14.55]
Technical Documents Plating B 3-5086147-7 2-5086182-5
page 305 Plating A 1-86147-8 1-86182-8
.480 [12.19] .187 [4.75] .715 [18.16]
Plating B 2-5086147-2 2-5086182-2
Plating A 86147-8 86182-8
.565 [14.35] .187 [4.75] .800 [20.32]
Plating B 5086147-1 5086182-1
Machine Applied
Mod I Posts,

Plating A 1-86147-2 1-86182-2


.800 [20.32] .150 [3.81] .998 [25.35]
Plating B 1-5086147-0 1-5086182-0
1Packaging quantity of 20,000 per reel.
2Packaging quantity of 1,000 per bag.
Note: Strip form posts applied with Insertion Machine No. 3-457382-1, includes power unit and applicator.

Note: All part numbers are RoHS compliant.


294
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Mod I Headers, Straight Post, Keyed, .031 x .062 [0.79 x 1.57] Centerline

Single Row, .156 [3.96]


Centers
See chart 1.00
[2.54] Typ.
Keyway
for locations

.250.010
[6.350.25]

C .125
[3.18]
.156.003 .003 .085
A spaces @ [3.960.08] = B [0.08] [2.16] Max.
.031.001 .063.002
[0.790.03] Typ. [1.600.05]

Material and Finish .062


.405.010
Housing Black thermoplastic, 94V-0 [1.57]
[10.290.25]
rated
Posts Brass, plated as follows:
.250.010
Plating A Selectively plated .125.010 [6.350.25]
.000030 [0.00076] gold on contact area, [3.180.25]
with gold flash over .000050 [0.00127] +.000
.031 .035
min. nickel on entire post [0.79] [0.89]
.040-.015
Typ.
Plating B .000100-.000200 +0.00
[1.020.38]
[0.00254-0.00508] tin over .000030
[0.00762] nickel on entire post

Related Product Data


Mate with
Board Mount Receptacles
pages 285, 286
Board Mount Receptacle
Assemblies pages 287-289
Crimp Snap-In Receptacles and Keyway Locations
Housings pages 290-292 (Ref only)
Locking Clip Contacts &
Housings pages 298 & 299 (see
page 298 for recommended post length). Dimensions No. of Post Height Post Height
No. of D=.405 [10.29] D=.587 [14.91] Keyway
Performance Specifications Pos. Keying
A B C Locations
Slots Plating A Plating B Plating A Plating B
page 305
2 1 .156 [3.96] .267 [6.78] 1 85829-2 5-87160-4 87247-2 5-87262-2 A
3 2 .312 [7.92] .423 [10.74] 1 85829-3 5-87160-5 87247-3 5-87262-3 A
Technical Documents 4 3 .468 [11.89] .579 [14.71] 2 85829-4 5-87160-6 87247-4 5-87262-4 A,C
page 305

Mod I Headers
5 4 .624 [15.85] .735 [18.67] 2 85829-5 5-87160-1 87247-5 5-87262-5 A,D
6 5 .780 [19.81] .891 [22.63] 3 85829-6 5-87160-7 87247-6 5-87262-6 A,C,E
.312.003
7 6 .936 [23.77] 1.047 [26.59] 3 85829-7 5-87160-8 87247-7 5-87262-7 A,C,E,
[7.920.08]
.156.003 8 7 1.092 [27.74] 1.203 [30.56] 4 85829-8 5-87160-9 87247-8 5-87262-8 A,C,E,G
[3.960.08] 9 8 1.248 [31.70] 1.359 [34.52] 3 85829-9 6-87160-0 87247-9 5-87262-9 A,D,G
10 9 1.404 [35.66] 1.515 [38.48] 5 1-85829-0 6-87160-1 1-87247-0 6-87262-0 A,C,E,G,J
.125 [3.18]
11 10 1.560 [39.62] 1.671 [42.44] 4 1-85829-1 6-87160-2 1-87247-1 6-87262-1 A,D,G,K
12 11 1.716 [43.59] 1.827 [46.41] 6 1-85829-2 6-87160-3 1-87247-2 6-87262-2 A,C,E,G,J,L
.055.003 13 12 1.872 [47.55] 1.983 [50.37] 4 1-85829-3 5-87160-2 1-87247-3 6-87262-3 A,D,J,M

7
[1.400.08] 14 13 2.028 [51.51] 2.139 [54.33] 7 1-85829-4 6-87160-4 1-87247-4 6-87262-4 A,C,E,G,J,L,N
Dia.
15 14 2.184 [55.47] 2.295 [58.29] 5 1-85829-5 6-87160-5 1-87247-5 6-87262-5 A,D,G,K,N
16 15 2.340 [59.44] 2.451 [62.26] 8 1-85829-6 6-87160-6 1-87247-6 6-87262-6 A,C,E,G,J,L,N,Q
Recommended Board Layout
17 16 2.496 [63.40] 2.607 [66.22] 6 1-85829-7 6-87160-7 1-87247-7 6-87262-7 A,D,G,K,N,R
18 17 2.652 [67.36] 2.763 [70.18] 7 1-85829-8 6-87160-8 1-87247-8 6-87262-8 A,D,F,J,M,P,S
19 18 2.808 [71.32] 2.919 [74.14] 8 1-85829-9 6-87160-9 1-87247-9 6-87262-9 B,D,F,J,L,N,Q,S
20 19 2.964 [75.29] 3.075 [78.11] 10 2-85829-0 7-87160-0 2-87247-0 7-87262-0 A,C,E,G,J,L,N,Q,S,U
21 20 3.120 [79.25] 3.231 [82.07] 7 2-85829-1 7-87160-1 2-87247-1 7-87262-1 A,D,G,K,N,R,U
22 21 3.276 [83.21] 3.387 [86.03] 11 2-85829-2 7-87160-2 2-87247-2 7-87262-2 A,C,E,G,J,L,N,Q,S,U,W
23 22 3.432 [87.17] 3.543 [89.99] 8 2-85829-3 7-87160-3 2-87247-3 7-87262-3 A,D,G,K,N,R,U,X
24 23 3.588 [91.14] 3.699 [93.95] 12 2-85829-4 7-87160-4 2-87247-4 7-87262-4 A,C,E,G,J,L,N,Q,S,U,W,Y
25 24 3.744 [95.10] 3.855 [97.92] 11 2-85829-5 7-87160-5 2-87247-5 7-87262-5 A,C,E,H,K,M,Q,S,U,W,Y

Note: All part numbers are RoHS compliant.


295
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Mod I Headers, Straight Post, Keyed,


.031 x .062 [0.79 x 1.57] Centerline (Continued)

Dimensions Post Height Post Height Post Height


No. of No. of Keyway
Keying D=.750 [19.05] D=1.187 [30.15] D=1.310 [33.27]
Pos. A B C Locations
Slots Plating A Plating B Plating A Plating B Plating A Plating B
2 1 .156 [3.96] .267 [6.78] 1 85923-2 5-85875-7 87283-2 85839-2 5-85840-2 A
3 2 .312 [7.92] .423 [10.74] 1 85923-3 5-85875-8 87283-3 5-86207-2 85839-3 5-85840-3 A
4 3 .468 [11.89] .579 [14.71] 2 85923-4 5-85875-1 87283-4 5-86207-9 85839-4 5-85840-4 A,C
5 4 .624 [15.85] .735 [18.67] 2 85923-5 5-85875-2 87283-5 5-86207-3 85839-5 5-85840-5 A,D
6 5 .780 [19.81] .891 [22.63] 3 85923-6 5-85875-9 87283-6 85839-6 5-85840-6 A,C,E
7 6 .936 [23.77] 1.047 [26.59] 3 85923-7 6-85875-0 87283-7 85839-7 5-85840-7 A,C,E,
8 7 1.092 [27.74] 1.203 [30.56] 4 85923-8 6-85875-1 87283-8 85839-8 5-85840-8 A,C,E,G
9 8 1.248 [31.70] 1.359 [34.52] 3 85923-9 5-85875-3 87283-9 85839-9 5-85840-9 A,D,G
10 9 1.404 [35.66] 1.515 [38.48] 5 1-85923-0 6-85875-2 1-87283-0 1-85839-0 6-85840-0 A,C,E,G,J
11 10 1.560 [39.62] 1.671 [42.44] 4 1-85923-1 6-85875-3 1-87283-1 1-85839-1 6-85840-1 A,D,G,K
12 11 1.716 [43.59] 1.827 [46.41] 6 1-85923-2 5-85875-4 1-87283-2 1-85839-2 6-85840-2 A,C,E,G,J,L
13 12 1.872 [47.55] 1.983 [50.37] 4 1-85923-3 6-85875-4 1-87283-3 1-85839-3 6-85840-3 A,D,J,M
14 13 2.028 [51.51] 2.139 [54.33] 7 1-85923-4 6-85875-5 1-87283-4 1-85839-4 6-85840-4 A,C,E,G,J,L,N
15 14 2.184 [55.47] 2.295 [58.29] 5 1-85923-5 6-85875-6 1-87283-5 1-85839-5 6-85840-5 A,D,G,K,N
16 15 2.340 [59.44] 2.451 [62.26] 8 1-85923-6 6-85875-7 1-87283-6 1-85839-6 6-85840-6 A,C,E,G,J,L,N,Q
17 16 2.496 [63.40] 2.607 [66.22] 6 1-85923-7 6-85875-8 1-87283-7 1-85839-7 6-85840-7 A,D,G,K,N,R
18 17 2.652 [67.36] 2.763 [70.18] 7 1-85923-8 6-85875-9 1-87283-8 1-85839-8 6-85840-8 A,D,F,J,M,P,S
19 18 2.808 [71.32] 2.919 [74.14] 8 1-85923-9 7-85875-0 1-87283-9 1-85839-9 6-85840-9 B,D,F,J,L,N,Q,S
20 19 2.964 [75.29] 3.075 [78.11] 10 2-85923-0 7-85875-1 2-87283-0 2-85839-0 7-85840-0 A,C,E,G,J,L,N,Q,S,U
21 20 3.120 [79.25] 3.231 [82.07] 7 2-85923-1 7-85875-2 2-87283-1 2-85839-1 7-85840-1 A,D,G,K,N,R,U
22 21 3.276 [83.21] 3.387 [86.03] 11 2-85923-2 7-85875-3 2-87283-2 2-85839-2 7-85840-2 A,C,E,G,J,L,N,Q,S,U,W
23 22 3.432 [87.17] 3.543 [89.99] 8 2-85923-3 5-85875-5 2-87283-3 2-85839-3 7-85840-3 A,D,G,K,N,R,U,X
24 23 3.588 [91.14] 3.699 [93.95] 12 2-85923-4 7-85875-4 2-87283-4 2-85839-4 7-85840-4 A,C,E,G,J,L,N,Q,S,U,W,Y
25 24 3.744 [95.10] 3.855 [97.92] 11 2-85923-5 7-85875-5 2-87283-5 2-85839-5 7-85840-5 A,C,E,H,K,M,Q,S,U,W,Y
Mod I Headers

Note: All part numbers are RoHS compliant.


296
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Mod I Headers, Right-Angle Post, Keyed, .031 x .062 [0.79 x 1.57] Centerline

Single Row, .156 [3.96]


Centers C

.031.001
Typ.
[0.790.03]
.125.010
[3.180.25]
.345.010
[8.760.25]
1.56 = B
Material and Finish A Spaces @
[3.96] .062.001
See Table
Housing Black thermoplastic, 94V-0 .100 Typ. Keyway [1.570.03]
for Locations
[2.54] .275.015
rated [6.990.38]
.250.010
Posts Brass, plated as follows: [6.350.25]
Plating A Selectively plated .125
.000030 [0.00076] gold on contact area, [3.18]
with gold flash over .000050 [0.00127] +.000 .031
.040-.015
nickel on entire post +0.00 2 Plc. [0.79] .131
[1.02-0.38] [3.33]
Plating B .000015 [0.00038] gold
over .000050 [0.00127] nickel on entire
post
Plating C .000100-.000200
[0.00254-0.00508] tin over .000050
[0.00127] nickel on entire post

Related Product Data


Mate with Keyway Locations
(Ref Only)
Board Mount Receptacles
pages 285, 286
Board Mount Receptacle
Assemblies pages 287-289
Crimp Snap-In Receptacles and Post Height Post Height
Dimensions No. of
Housings pages 290-292 No. of
Keying D=.345 [8.76] D=.500 [12.70] Keyway
Pos. A B C Locations
Locking Clip Contacts and Slots Plating A Plating C Plating B Plating C
Housings pages 298 & 299 (see 2 1 .156 [3.96] .267 [6.78] 1 87654-2 5-87655-2 87258-2 5-87194-1 A
page 298 for recommended post length). 3 2 .312 [7.92] .423 [10.74] 1 87654-3 5-87655-3 87258-3 5-87194-2 A
Performance Specifications 4 3 .468 [11.89] .579 [14.71] 2 87654-4 5-87655-4 87258-4 5-87194-3 A,C
page 305 5 4 .624 [15.85] .735 [18.67] 2 87654-5 5-87655-5 87258-5 5-87194-4 A,D

Mod I Headers
6 5 .780 [19.81] .891 [22.63] 3 87654-6 5-87655-6 87258-6 5-87194-5 A,C,E
Technical Documents 7 6 .936 [23.77] 1.047 [26.59] 3 87654-7 5-87655-7 87258-7 5-87194-6 A,C,E
page 305 8 7 1.092 [27.74] 1.203 [30.56] 4 87654-8 5-87655-8 87258-8 5-87194-7 A,C,E,G
.312.003 9 8 1.248 [31.70] 1.359 [34.52] 3 87654-9 5-87655-9 87258-9 5-87194-8 A,D,G
[7.920.08] .156.003 10 9 1.404 [35.66] 1.515 [38.48] 5 1-87654-0 6-87655-0 1-87258-0 5-87194-9 A,C,E,G,J
[3.960.08]
11 10 1.560 [39.62] 1.671 [42.44] 4 1-87654-1 6-87655-1 1-87258-1 6-87194-0 A,D,G,K
E 12 11 1.716 [43.59] 1.827 [46.41] 6 1-87654-2 6-87655-2 1-87258-2 6-87194-1 A,C,E,G,J,L
13 12 1.872 [47.55] 1.983 [50.37] 4 1-87654-3 6-87655-3 1-87258-3 6-87194-2 A,D,J,M
.078.002 14 13 2.028 [51.51] 2.139 [54.33] 7 1-87654-4 6-87655-4 1-87258-4 6-87194-3 A,C,E,G,J,L,N,

7
[1.980.05] 15 14 2.184 [55.47] 2.295 [58.29] 5 1-87654-5 6-87655-5 1-87258-5 6-87194-4 A,D,G,K,N
Dia.
16 15 2.340 [59.44] 2.451 [62.26] 8 1-87654-6 6-87655-6 1-87258-6 6-87194-5 A,C,E,G,J,L,N,Q
Recommended Board Layout 17 16 2.496 [63.40] 2.607 [66.22] 6 1-87654-7 6-87655-7 1-87258-7 6-87194-6 A,D,G,K,N,R
18 17 2.652 [67.36] 2.763 [70.18] 7 1-87654-8 6-87655-8 1-87258-8 6-87194-7 A,D,F,J,M,P,S
19 18 2.808 [71.32] 2.919 [74.14] 8 1-87654-9 6-87655-9 1-87258-9 6-87194-8 B,D,F,J,L,N,Q,S
E Dimension 20 19 2.964 [75.29] 3.075 [78.11] 10 2-87654-0 7-87655-0 2-87258-0 6-87194-9 A,C,E,G,J,L,N,Q,S,U
.345 [8.76] Post Height 21 20 3.120 [79.25] 3.231 [82.07] 7 2-87654-1 7-87655-1 2-87258-1 7-87194-0 A,D,G,K,N,R,U
.250 [6.35] for mounting header flush 22 21 3.276 [83.21] 3.387 [86.03] 11 2-87654-2 7-87655-2 2-87258-2 7-87194-1 A,C,E,G,J,L,N,Q,S,U,W
with board edge; .595 [15.11] for
23 22 3.432 [87.17] 3.543 [89.99] 8 2-87654-3 7-87655-3 2-87258-3 7-87194-2 A,D,G,K,N,R,U,X
supporting mating connector on board.
24 23 3.588 [91.14] 3.699 [93.95] 12 2-87654-4 7-87655-4 2-87258-4 7-87194-3 A,C,E,G,J,L,N,Q,S,U,W,Y
.500 [12.70] Post Height
25 24 3.744 [95.10] 3.855 [97.92] 11 2-87654-5 7-87655-5 2-87258-5 7-87194-4 A,C,E,H,K,M,Q,S,U,W,Y
.250 [6.35] for mounting header flush
with board edge; .750 [19.05] for
supporting mating connector on board. Note: All part numbers are RoHS compliant.
297
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Locking Clip Contacts for .031 x .062 [0.79 x 1.57] Posts,


.031 x .062 [0.79 x 1.57] Centerline
Wire Crimp Contacts with
Insulation Support
Material and Finish
Spring
Contact Body Phosphor bronze,
plated as follows:
Plating A Selectively plated Body
.000015 [0.00038] gold on contact area,
with gold flash over .000050 [0.00127] Mating Post
nickel on entire post
Plating B .000100 [0.00254] min.
tin over .000050 [0.00127] nickel on
entire contact
Contact Spring Stainless steel
Wire Size Contact Part Nos.
Related Product Data Ins. Dia.
Range Finish
Range
Mate with AWG [mm2] Strip Form Loose Piece
Machine Applied Posts page 294 Plating A 87269-2 87278-2
22-18 [0.3-0.9] .050-.0100 [1.272.54]
Headers (.500 Post Height Only) Plating B 5-87269-1 5-87278-1
pages 295-297 (see recommended post
length below)*
Housings used in page 299 Wire Size Applicator Premium
Application Tooling Range CERTI-CRIMP
Part Type Used With Hand Tool
pages 300-304 AWG [mm2] Number Machine
Part Number
Performance Specification page 466007-2 HDM Model "K" (AMP-O-LECTRIC)1
305 22-18 [0.3-0.9] 90308-1
466950-2 SCA Stripper/Crimper (AMP-O-MATIC)

Technical Documents 1AMP-O-LECTRIC KII Machine. Applicators also available for AMPOMATOR Lead Making Machines. Consult TE.
page 305 Note: These contacts must be crimped in accordance with TE Specification No. 114-25008 in order to function
properly in a connector housing.
Extraction Tool Part No. 91104-1 is used for removing individual contacts from connector housings and for detaching
contacts from mating posts.

Wire Harnessing Fixed


Clamp
If necessary, wires can be
Locking Clip Contacts

Extraction Tool
Part No. 91104-1
grouped with cable ties and
secured to a panel with
fixed clamps. However,
locking clip contacts must
Instruction Sheet be free to float within the Unrestricted
408-7678 Wire for
connector housings to Free-Floating
allow proper extraction. Contacts
Cable
Therefore, harnessing Tie
hardware or the use of

7 multiple terminations per


contact must not restrict
the free-floating action of
contacts in the housing. For
.281/.344* [7.14/8.74]
(without housing)

more information, request


Insulating and Bundling
Products Catalog 124132.
.370/.433* [9.40/11.00]
(with housing)

*Dimension defines .031 x .062 [0.79 x 1.57] portion of post.


If post is longer than maximum specified, post tip may butt against wire ends.

Note: All part numbers are RoHS compliant.


298
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Locking Clip Connector Housings, .031 x .062 [0.79 x 1.57] Centerline


C
Single Row, .156 [3.96]
Centers
A B

.110
[2.79] Min.
Typ.

Material and Finish .220


Black thermoplastic, 94V-0 rated [5.59]

Related Product Data .060


Contacts used with page 298 [1.52]
Mate with
Machine Applied Posts page 294
Headers pages 295-297 (see page
298 for recommended post length) .860
[21.84]
Performance Specifications
page 305 .031 x .062
[0.79 x 1.57] .433/.370
Post [11.00/9.40]
Technical Documents (Ref only)
page 305

.194
[4.93]
.110
[2.79]
Typ.

.156
[3.96]

Connector Housing
Typ.

Locking Clip
No. of Dimensions Housing Part Nos. Keyed Positions
Pos. A B C UnKeyed Keyed on Mating Face
1 .200 [5.08] 87270-1
2 .376 [9.55] 87270-2
3 .156 [3.96] .156 [3.96] .532 [13.51] 1-87270-3
3 of 4 87270-3
.156 [3.96] .312 [7.92] .688 [17.48]
4 87270-4
4 of 5 1-87270-0

7
.312 [7.92] .312 [7.92] .844 [21.44]
5 1-87270-4
5 of 6 1-87270-2
.312 [7.92] .468 [11.89] 1.000 [25.40]
6 87270-5
6 of 7 1-87270-1
.468 [11.89] .468 [11.89] 1.156 [29.36]
7 1-87270-5
8 .468 [11.89] .624 [15.85] 1.312 [33.32] 87270-6
9 .624 [15.85] .624 [15.85] 1.468 [37.29] 1-87270-6
10 .624 [15.85] .780 [19.81] 1.624 [41.25] 87270-7
11 .780 [19.81] .780 [19.81] 1.780 [45.21] 1-87270-7
12 .780 [19.81] .936 [23.77] 1.936 [49.17] 87270-8
Indicates "closed cavity". No post entry hole in this position.
Note: All part numbers are RoHS Notes: 1. All housings listed above will accept Locking Clip Contacts No. 87269 and 87278, refer to page 298
compliant. 2. Refer to TE Instruction Sheet 408-7676 for proper contact orientation within the housings.

299
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Application Tooling

For Crimp Snap-In Side-Feed Heavy-Duty Interchangeable applicators For more information, request
Receptacles and Locking Miniature Applicators for crimping products reeled Instruction Sheet 408-8040.
Clip Contacts (Coded HDM) side-by-side on single or
dual carrier strips (primarily
closed-barrel terminals and
open-barrel contacts).
Similar design as the end-
feed version. All side-feed
applicators include a wire
stop to help correctly
position the wire end in the
crimping target area.

AMP-O-LECTRIC Model G Semiautomatic bench Specifications


Terminating Machines, machines for crimping Width 18.7-25.3 [475-643]
354500-1, -9, -11 reeled terminals and depending on applicator type
contacts, featuring a quiet
Depth 21.5-28.1 [546-713]
and reliable direct motor
depending on applicator type
drive, microprocessor
controls for ease of setup Height 20 [508]
and operation, and guarding Weight 240 lb [110 kg]
and lighting designed for Electrical 120 or 220 VAC, 50
operator convenience and or 60 Hz; 310 VA
safety. All models are Air 90-110 psi [6.21-7.59 bar],
equipped with either manual 6 scfm [0.00282 m3/s] when
or automatic precision required with air-feed applicators
adjustment of crimp height.
Wire Range 26-10 AWG
Machine-mounted sensors
[0.12-6 mm2] solid or stranded,
are available for crimp
depending on product applied
quality monitoring using
conventional miniature-style For more information, request
applicators. Catalog 65828, Video 198116,
Catalog 82275 [Crimp Quality
Monitor (CQM)], Video 198094.

AMPOMATOR CLS IV+ Fully-automatic machines Specifications


Lead-Making Machines, that measure, cut, strip and Width 159 [4 040]
356500-1, -2, 1213400-1, -2 terminate single leads.
Application Tooling

Depth 68 [1 730]
Microprocessor-controlled,
and programmed and Height 86 [2 185] with
operated using an easy-to- 24 [610] dia. reel
follow, menu-driven Weight 2 000 lb [907 kg]
touchscreen. Features Electrical 220 VAC, 50 or
include direct-drive 60 Hz, single phase, 25 A, with
terminating units with neutral and ground
precision crimp height Air 90 psi [6.21 bar], 15 scfm
adjustment, fully [0.0071 m3/s] sustained

7 programmable setups, wire


runout and splice detection,
and motorized pre-feed with
wire straightener. Crimp
Wire Range 26-10 AWG
[0.12-6 mm2] stranded, 26-16 AWG
[0.12-1.4 mm2] solid
quality monitoring is also Lead Lengths 3-90
available. [76.2-2 285], 90-1 000
[2 285-25 400] with long lead
conveyors
For more information, request
Catalog 124324, Video 198142
(NTSC), 199609 (PAL).
Note: All part numbers are RoHS
compliant. Note: For additional tooling options, contact TE or reference the TE web site.
300
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Application Tooling (Continued)

For Crimp Snap-In AMP-O-MATIC Stripper- Semiautomatic bench Specifications


Receptacles and Locking Crimper Machines, crimping machines that also Width14 [355]
Clip Contacts (Continued) 854040-3, -4 strip the wire, and are
Depth18 [457]
therefore used for
terminating jacketed cable. Height33 [838] without reel
Feature manual precision Weight150 lb [68 kg]
adjustment of crimp height, Electrical120 VAC, 50 or
keyed strip blades for faster, 60 Hz, .5 A
more accurate setups, and Air80-100 psi [5.52-6.90 bar],
an efficient scrap removal 3.5 scfm [0.00165 m3/s]
system. All adjustments can
Wire Range32-14 AWG
be made from the front of
[0.03-2 mm2]
the machines without
special tools. Available with For more information, request
crimp quality monitoring. Catalog 65004, Video 198075,
Catalog 82275 [Crimp Quality
Monitor (CQM)], Video 198094.

Stripper-Crimper Interchangeable applicators For more information, request


Applicators (coded SCA) for crimping products in Catalog 65004 (AMP-O-MATIC
AMP-O-MATIC Stripper- Stripper-Crimper Machines),
Crimper Machines. Consist Catalog 82275 [Crimp Quality
of separate ram and lower Monitor (CQM)].
tooling assemblies. Similar
dial-in settings for different
wire sizes and insulation
diameters as HDM
applicators. Available with
sensors for use with the
Crimp Quality Monitor.

Kappa 235, Automatic Cut The Kappa 235 has the Specifications
and Strip, 3-547178-1 capability of processing Width25 [630]
wires with a cross section of
Depth16 [490]
up to 4 AWG and an outside
diameter of 0.59 inch. Height13.4 [370]
Options include an inner Weight95 lb [44 kg]
conductor processing kit for Wire Cross-Sections

Application Tooling
multiconductor cables and 24-4 AWG [0.22-25 mm2]
a flat ribbon cable kit. Flat Ribbon Cableswidth up
to 40mm
Length Range0.04-328ft
[1mm - 99.99m] (+/- 0.2%)
Electrical110/230 V -
50/60Hz, switches automatically

Cosmic 927R
Micro-Cable Stripper
The Cosmic 927R
Micro-Cable Stripper was
developed to reliably strip
various insulation materials
Thus optimal stripping
quality is guaranteed and
damage to the conductor is
eliminated.
7
and micro-cable. From
conductor diameter 36 AWG
to 10 AWG, the stripping
diameter display can be set
to within 0.1mm increments.

Note: All part numbers are RoHS


compliant. Note: For additional tooling options, contact TE or reference the TE web site.
301
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Application Tooling (Continued)

For Crimp Snap-In CERTI-CRIMP Straight Premium grade hand tools. All CERTI-CRIMP head
Receptacles and Locking Action Hand Tools (SAHT) Feature ratchet control to assemblies / dies, have
Clip Contacts (Continued) provide complete crimp multiple power options
cycle. Die sets close in a available. The
straight line. Include a accompanying diagram
contact locator and wire outlines those power
stop, plus an insulation options. See catalogs
crimp adjustment lever, 1654714 (SDE Electric
when applicable. Terminator), 124208 (626
Approximate weight 1.3 lb Pneumatic Tool System) and
[0.59 kg] 1773381(Battery-Powered
Crimp Tool Kits) for more
information.
For more information, request
Catalog 65780.

PRO-CRIMPER III Commercial grade hand All PRO-CRIMPER head


Hand Tool tool for crimping various assemblies / dies, have
products. Features ratchet multiple power options
control to provide complete available. The
crimp cycle. Accepts both accompanying diagram
pinned- and shouldered- outlines those power
style die sets. Locators are options. See catalogs
provided with pinned-style 1654714 (SDE Electric
die sets for proper contact Terminator), 124208 (626
and wire positioning, and Pneumatic Tool System) and
Application Tooling

to help minimize contact 1773381(Battery-Powered


rotation and bending during Crimp Tool Kits) for more
crimping. Approximate information.
weight 1.3 lb [0.60 kg]. Instruction Sheet
408-9930

Note: For additional tooling options, contact TE or reference the TE web site.
302
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Application Tooling (Continued)

For Board Mount Modular Insertion System Bench machines for insert- Specifications
Receptacles and Machine (MIS) Bench Machines, ing a variety of products Width 18 [457]
Applied Posts 217600 Series, into pc boards. Uses the
Depth 24 [610]
662820 Series (shown) same interchangeable
insertion heads as the Height 18 [457]
Comp-U-Sertor II Machines. Weight 250 lb [113 kg]
Series 217600 machines Electrical 120 to 220 VAC,
feature a manually-operated 50 or 60 Hz (217600); 120 or
X-Y positioning fixture, plus 240 VAC, 60 Hz, single phase,
a locator spotlight. The 120 VA (662820)
machine cycles when the Air 80 psi [5.52 bar] min.,
board hole is placed on the 15 scfm [0.00708 m3/s] min.
anvil and both triggers on
Insertable Area 18 x 22
the dual handles attached
[457 x 559] max.
to the X-Y fixture are
depressed. Series 662820 For more information, request
machines, without board Catalog 296059.
fixturing, cycle automatically
when the hole is properly
located. A stabilizing disk
over the anvil helps keep
For Board Mount Receptacles
the board level.
This benchtop insertion
machine installs contacts
into PC boards at rates to
2000 per hour. A spotlight
highlights the insertion area,
and lower tooling assures
precise board location.
The machine is activated
by a foot pedal.

P300 Automatic Insertion Automatic machine for Specifications


Machine inserting a variety of con- Width 57.5 [1 460]
tacts into pc boards (PCBs).
Depth 64.5 [1 640]
Equipped with an insertion
tool (comprised of a prod- Height 60 [1 520]
Weight Depending on

Application Tooling
uct-specific insertion head,
an anvil, and a product feed configuration
mechanism). Stepper-motor Electrical 110 V, 60 Hz
driven X-Y table positions Air 87 psi [6 bar]
PCBs under insertion head.
Insertable Area 24 x 16
Surface Mount Equipment
[600 x 400]
Manufacturers Association
(SMEMA) compatible inline For more information, contact TE.
PCB Insertion Station for
posts, tabs, receptacles or
sockets. Stand-alone unit is
field upgradeable to Pass
Through. Mounts up to four
TE pneumatic insertion
7
heads. Modem diagnostics
standard, vision system
optional. Control panel used
to program and monitor
entire insertion process.

Note: All part numbers are RoHS


compliant. Note: For additional tooling options, contact TE or reference the TE web site.
303
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Application Tooling (Continued)

For Board Mount P350 Pin Insertion Machine A servo powered XY table Specifications
Receptacles and Machine positions the PCB under a Width 102 [2600]
Applied Posts (Continued) central drive station at high
Depth 118 [3000]
speed. The tool changer
can hold up to 3 insertion Height 87 [2200]
heads each capable of Weight approx 3500 lb
applying a different product. [1600 kg]
A unique rotary insertion Electrical 230 V, 50-60 Hz,
finger allows the application 10 A
of products at up to 7 Air 600 kPa dried air
different angles without
Max. Board Size 17.5 x 17.5
rotating the PCB. This
[450 x 450]
allows the P350 to apply
product at different angles
without a reduction in
insertion rate or the
The P350 is a fully
potential positioning error
automatic inline pin
associated with PCB
insertion machine capable
rotation. Icon driven
of applying reeled pins,
software with touch screen
tabs, receptacles and
provides a simple to use,
similar products into PCBs.
intuitive operator interface.
With inline operation, an
automatic tool changer and The P350 provides a wide
insertion rates up to 5 per range of solutions for pin
second, it is focused at fully insertion applications.
automatic high speed Quick change tooling
operation to maximize packs, and a wide range of
throughput while minimizing options make it a flexible
costly scrap. high speed platform.
Application Tooling

304
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Performance Specifications
The electrical, mechanical Mechanical Characteristics
and environmental charac- Contact Durability
teristics of the AMPMODU
Receptacles Locking
.031 x .062 [0.79 x 1.57]
Plating Standard High Clip
Interconnection System are Pressure Pressure Contacts
listed below: .000016 [0.00041] Min. Tin 75 Cycles 25 Cycles N/A
.000079 [0.00201] Min. Tin 75 Cycles 25 Cycles N/A
.000100 [0.00254] Min. Tin N/A N/A 25 Cycles
.000015 [0.00038] Gold 75 Cycles 50 Cycles 25 Cycles
.000030 [0.00076] Gold 200 Cycles 100 Cycles N/A

Electrical Characteristics Connector Durability


Contact Current Rating Receptacles
5 amperes max. for single contact in free Mating 16 oz. [4.45N] max. per contact after 3 mating cycles
air, could vary due to ambient tempera- (standard pressure)
ture, wire size and duty cycles. 30 oz. [8.34N] max. per contact after 3 mating cycles
(high pressure, gold)
Contact Resistance
12 milliohms at 100 ma and 50 mv open 60 oz. [16.68N] max. per contact after 3 mating cycles (high pressure, tin)
circuit. Unmating 1 oz. [0.28N] min. per contact after 3 mating cycles (standard pressure)
Dielectric Rating 3 oz. [0.83N] min. per contact after 3 mating cycles (high pressure)
At Sea Level 1200 VAC between con- Locking Clip Contacts
tacts on .156 [3.96] centers for 1 minute. Mating 4 lb. [17.79N] max. per contact after 3 mating cycles
Insulation Resistance 5 x 103 Unmating 2 lb. [8.90N] min. per contact after 3 mating cycles
megohms (initial)
Environmental Characteristics
Operating Temperature -65C to 105C [-85F to 221F] (Gold Plated)
-65C to 60C [-85F to 140F] (Tin Plated)

Technical Documents
Various technical docu- Application Specifications Instruction Sheets provide
ments are available for your describe requirements for instructions for assembling
use: using the product in its or applying the product.
Product Specifications intended application and/or They are intended for the
describe technical perform- crimping information. Manufacturing Assembler or
ance characteristics and They are intended for the Operator.
verification tests. They are Packaging and Design 408-7308 Clinching Procedures for
intended for the Design, Engineer and the Machine Header Assemblies

Product Specifications
Component and Quality Setup Person. 408-7411 Suggestions for Wave
Engineer. 114-25000 Crimp Snap-In Receptacle Soldering AMPMODU
Contacts Receptacles
108-25016 Interconnection System,
114-25004 Board Mount Receptacle 408-7594 TE Hand Tool 90274-2 for
Standard Pressure
Contacts Crimping Crimp Snap-In
108-25025 Interconnection System, 18-22 AWG Contacts
High Pressure, Gold 114-25008 Locking Clip Contacts
114-25011 Machine Applied Straight 408-7750 TE Hand Tool 90328-1 for
108-25025-1 Interconnection System, Crimping Crimp Snap-In
High Pressure, Tin Posts
Contacts (22-26 AWG)
108-36029 Locking Clip Connectors 408-7676 AMPMODU Locking Clip

7
Connectors and Contacts
408-7671 TE Hand Tool 90308-1 for
Crimping Locking Clip
Contacts
408-7678 TE Extraction Tool 91104-1
for Locking Clip Contacts
408-7981 Clinching Procedures for
Receptacle Assemblies
408-9451 TE Extraction Tool
843473-1 for Crimp
Snap-In Receptacles

Note: All part numbers are RoHS compliant.


305
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Shunts

Product Facts
7600 Series Programmable
Shunts use conventional
.100 x .300 [2.54x7.62] DIP
leg spacing
Post Shunts are used to
common pairs of .025 [0.64]
square posts, .025 [0.64]
diameter round posts and
.022 x .026 [0.56 x 0.66]
formed posts

TE offers a variety of high TE Post Shunts mate with All TE shunts feature one-
quality shunts for low cost any common pairs of piece construction for high
manual programming. TE square, rectangular and reliability. All have high
7600 Series Programmable round posts. Post shunts normal forces for excellent
Shunts are designed on come electrical continuity. For
the standard .100 x .300 in two-position low profile, added reliability, Tandem
[2.54 x 7.62] DIP spacing. 2 mm miniature, tandem Spring and Dual Beam
TE DIP Shunts are a highly spring, dual beam, and Shunts have two points of
reliable, low cost means of multiposition versions. contact in each receptacle.
manually programming Among the options
various types of available are choices of
electrical/electronic gold or tin plating, beryllium
equipment. The shunt copper or phosphor bronze
consists of a series of contact material and shunts
conductive straps packaged with 94V-0 rated housing
in a DIP configuration. The spaces on .079 [2.00],
straps can be retained intact .100 [2.54] and .200 [5.08]
for a closed circuit or broken centers with the low profile
Shunts

with a hand tool to produce series requiring only .250


an open circuit. [6.35] clearance from the
pc board.

8
306
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
41582B IL p.17B
AMPMODU Interconnection System

Dual In-Line Package (DIP) Shunts 7600 Series

Standard Shunt
Standard Pressure

Material and Finish


Housing Glass-filled polyester, UL
.290
94V-0 rated [7.37]
Contacts Brass
Finish Selectively plated .000100
min. tin on solder area over .000050
min. nickel on entire contact
Contact Lead Spacing .079 15 Max.
.100 x .300 [2.54x7.62] [2.01] Typ.
Lead Length .140 [3.56] below
mounting surface
Housing Color Black
Programming Tool See below

Programming Hand Tool


Part No. 435862-1

.100 .005 .035 .005


Typ. Dia. Typ.
[2.54 0.13] [0.89 0.13]

.300 .005
[7.62 0.13]
This tool provides a reliable means of
programming DIP shunts. It is rugged,
light-weight and dependable. No special
skills are required to use this tool.

No. of Dimension A Standard Shunt


Pos. inch mm Standard Pressure
4 .400 10.16 1825190-4
6 .600 15.24 1825190-6
7 .700 17.78 1825190-7
8 .800 20.32 1825190-8
9 .900 22.86 1825190-9
10 1.000 25.40 1-1825190-0
12 1.200 30.48 1-1825190-2

Shunts

8
Note: All part numbers are RoHS compliant.
307
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Post Shunts

Product Facts 2-Position, Low Profile Shunts


One-piece contact Economy Shunt
construction .100 [2.54] Centerline
High normal forces
94V-0 rated housings
Gold inlay, gold plate or tin 2.498
plate over nickel [63.45]

Stackable
Those post shunts indicated
are recognized under the
component program of
Underwriters
Laboratories Inc.,
File No. E28476 R

and certified by the


Canadian Standards
Association R

Part Numbers
File No. LR 7189
Configuration Housing
Color
Gold Plate1 Gold Flash1 Tin Plate Gold Plate
.000015 .000005 .000100 .000030
[0.00038] [0.00013] [0.00254] [0.00076]
Tandem Spring Shunts Strip of 10 Blue 382811-2
Two points of contact Strip of 10 Black 382811-6 382811-8 382811-5 2-382811-0
provide extra reliability Strip of 10 Red 382811-9
Loose Piece Black 1-382811-6 1-382811-8
Shunts accept posts as
short as .175 [4.45]; posts In contact area
1

bottom at .330 [8.38]

2mm Mini Shunts


Stackable on 2mm contact
centerline Standard Housing Shunt
.200 [5.08] Centerline
Low profile
R

Available in strips of 10 R

Material and Finish 3.453


Low Profile and 2mm Shunts [87.70]
Housing Glass-filled thermoplastic,
black, UL 94V-0 rated
Contacts Beryllium copper or
phosphor bronze, plated .000050
[0.00127] nickel underplate with gold
plate in contact area or tin overall

Material and Finish


Tandem Spring Shunts
Shunts

Housing Nylon, UL 94V-0 rated


Contacts Phosphor Bronze
Finish .000030 [0.00076] nickel
underplate with gold inlay in the contact Part Numbers
area or tin overall Housing
Configuration Gold Plate1 Gold Plate1 Tin Plate
Color .000015 .000030 .000100
[0.00038] [0.00076] [0.00254]

8
Strip of 10 Black 531230-2 531230-3 531230-1
In contact area
1

Note: All part numbers are RoHS compliant.


308
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Post Shunts (Continued)

2-Position,
Low Profile Shunts (Novo)
(Continued)

Handle Shunt
.100 [2.54] Centerline

Loose Piece Part Numbers


Housing Gold Plate1 Gold Plate1 Gold Plate1 Tin Plate Type
Color .000015 .000030 .000050 .000100
[0.00038] [0.00076] [0.00127] [0.00254]
Black 881545-1 881545-2 881545-3 4-881545-2 Open Top
Black 880584-1 880584-2 880584-3 880584-4 Closed Top
In contact area
1

2 mm Mini-Shunt
.079 [2.00] Centerline
R

Part Numbers
Configuration Housing
Color
Gold Plate1 Gold Plate1
.000015 .000030
[0.00038] [0.00076]
Strip of 10 Black 382575-2 382575-3
1In contact area

Dual Beam Shunt

2.500
[63.5]
Ref.

Shunts
.196
[4.98]
Ref.
.247
[6.27]
Ref.
.096
[2.44]

Part Numbers
Configuration Housing Gold Plate1 Gold Plate1 Type

8
Color .000015 .000030
[0.00038] [0.00076]
Strip of 10 Black 390088-2 390088-1 Open Top
Strip of 10 Blue 390088-4 390088-3 Open Top
Note: All part numbers are RoHS Strip of 10 Yellow 390088-5 Open Top
compliant. 1In contact area
309
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Post Shunts (Continued)


Tandem Spring Shunt

.100 [2.54] Centerline


R

Part Numbers
Housing Gold Inlay1 TinPlate
Color .000030 .000100
[0.00076] [0.00254]
Black 530153-2 4-530153-1
In contact area
1

Multiposition Shunts
for.025 [0.64] Square Posts
.300
A [7.62]
MAX
.200 [5.08] Centerline .200
[5.08]
R .150
R [3.81]
REF
.048
[1.22]
REF

Housing Glass-filled polyester


Contacts Beryllium Copper
Finish .000030 [.00076] gold in
contact area over .000050 [.00127]
.250
nickel on entire contact [6.35]
MAX
Current Rating 2.5 amps
.550
[13.97]

Dimension A Housing Part


Size Color Number
Shunts

inch mm
2x2 .246 6.25 Black 390102-1
2x2 .246 6.25 Red 390102-3
2x3 .396 10.01 Black 390102-2

8
Note: All part numbers are RoHS compliant.
310
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Performance Specifications

Dual In-Line Package (DIP) Shunts 7600 Series


Current Rating
Standard pressure 2 amperes for +20C rise above ambient (one conductor per shunt
Machine insertable 1 ampere for +20C rise above ambient (one conductor per shunt)
Insulation Resistance 1x 1010 ohms min. at 100 VDC
Dielectric Withstanding Voltage 500 VDC min.
Capacitance 2 picofarads max. between adjacent straps
Temperature Rating -55C to +105C
Terminal Strength (Bend Test) Two 45 bend cycles per MIL-STD-202, Method 211, Condition B
Solder Bridging
Cut straps can be reconnected by solder bridging. Solder bridging recommendations are:
Use low temperature solder (60/40 tin/lead)
Use solder tip approximately 1/32 [0.79] in diameter
Do not let solder tip come in contact with plastic material

Post Shunts
Current Rating
3 amperes max. unless otherwise noted
Temperature Rating -65C to +105C (gold) -40C to +85C (tin)

Technical Documents
Various technical documents are available for your use:
Product Specifications describe technical performance characteristics and verification
tests. They are intended for the Design, Component and Quality Engineer.
108-7533 Dual In-Line Package (DIP) Shunts
108-1445 2mm Mini Shunt
108-1476 Economy Shunt, Multiposition Shunt
108-1674 Dual Beam Shunt
108-9057 Low Profile Shunt
108-9062 Tandem Spring Shunt
108-37006 Novo Shunt with Handle
Application Specifications describe requirements for using the product in its intended
application and/or crimping information. They are intended for the Packaging and Design
Engineer and the Machine Setup Person.
114-1045 Tandem Spring Shunt
114-1054 Dual In-Line Package (DIP) Shunts
114-1059 Economy Shunt, Dual Beam Shunt, Low Profile Shunt, Multiposition
Shunt
114-1074 2mm Mini Shunt Shunts
Instruction Sheets provide instructions for assembling or applying the product. They are
intended for the Manufacturing Assembler or Operator.
408-7768 Dual In-Line Package (DIP) Shunts
408-3208 Tandem Spring Shunt
408-3230 Economy Shunt, Dual Beam Shunt, Low Profile Shunt
408-3251 Multiposition Shunt
408-3276 2mm Mini Shunt

8
311
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Engineering Notes

8
312
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Part Number Index


Part Number Index
Note: This index lists all cataloged parts Part No. Page Part No. Page Part No. Page
by base no. only. Complete part nos. (with
19156 139, 140 87227 85, 96, 97 102104 290
prefixes and/or suffixes) are shown on the
page(s) indicated. 57013 58 87230 85, 98, 99 102106 290
57038 58 87232 85, 94, 95, 210, 221 102107 211
57118 58 87233 94, 95 102114 203
57119 58 87247 295 102128 210, 213
57131 58, 59 87258 297 102185 255, 258, 259
57138 58 87262 295 102198 139, 140
57139 58 87269 298 102202 115, 210
57144 58 87270 299 102203 85, 116
57145 58 87278 298 102241 210, 215
57288 58 87283 296 102312 258, 259
57289 58 87309 213 102316 213
57290 58 87316 286 102338 203
85487 286 87456 210, 216 102348 211
85493 286 87474 129 102387 210, 220
85829 295 87483 210 102393 256
85839 296 87496 133 102394 256
85840 296 87499 210, 214 102395 265
85875 296 87523 213 102396 255, 259
85923 296 87568 127 102398 255, 256
85969 213 87572 126 102399 265
86016 213 87577 124, 125 102448 256
86147 294 87579 122, 123 102449 265
86177 216 87587 119, 120 102523 116
86181 285, 287, 288 87589 117, 118 102536 255, 259
86182 294 87605 85, 131 102537 255, 259
86207 296 87608 130 102540 255, 259
86286 169, 172, 175-177, 87623 163 102541 255, 259
180, 182, 189, 191, 87631 210, 218, 219 102548 213
195-197, 214-218, 220,
256, 257 87654 297 102557 149
86432 286 87655 297 102567 198
86434 286 87666 213 102570 124, 125
86477 286 87667 213 102589 193, 200
86479 98, 99 87710 218 102617 122, 123
86480 286 87733 219 102618 117, 118
86492 213 87743 204 102619 119, 120
87003 286 87756 210, 213 102620 127
87022 163 87772 286 102641 265
87025 291 87774 286 102642 265
87046 213 87809 213 102666 199
87077 214-218, 220, 87878 163 102681 255, 259
256, 257 87879 85, 177 102690 193, 199
87105 286 87921 218 102691 199
87107 211 87922 218, 219 102692 198
87116 293 87977 210, 217 102693 257
87124 207 87983 287 102694 257
87131 209 87984 287 102695 257
87132 209 87985 287 102699 85, 148
87133 209 87986 287 102742 177
87159 293 87987 289 102766 142
87160 295 87988 289 102777 199
87165 207 87989 287 102783 262, 263
87175 208 87990 287 102784 262, 263
87176 209 87993 287 102785 262, 263
87179 208, 209 87995 289 102786 262, 263
87190 207 102055 126 102787 262, 263
87191 207 102090 292 102788 262, 263
87194 297 102095 211 102789 263
87195 213 102099 290 102791 264
87215 96, 97 102100 290 102792 264
87220 85, 93 102102 290 102802 200
87224 93 102103 290 102823 259

313
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
Part Number Index

Part Number Index (Continued)

Part No. Page Part No. Page Part No. Page Part No. Page
102826 144 103639 245 103960 231 104895 19
102871 143 103640 231 103961 231 104905 208
102898 146 103641 231 103968 233 104909 245
102903 263 103644 231 103969 233 104910 245
102917 213 103645 231 103970 233 104935 247
102918 213 103648 233 103971 233 111196 56
102920 213 103649 233 103972 233 146079 163
102935 280 103650 233 103973 233 146128 109
102972 107 103651 233 103974 229 146129 109
102973 107 103652 233 103975 229 146130 110
102976 107 103653 237 103976 229 146131 110
102977 107 103654 239 103977 229 146132 86, 109
102985 263 103655 239 103978 229 146133 109
102987 261, 263 103656 239 103979 229 146134 86, 110
102988 261, 263 103657 239 104068 30 146135 110
102991 264 103658 237 104069 29 146138 178
103056 281 103659 237 104071 28 146205 202
103058 281 103660 237 104074 27 146250 104, 107
103080 115 103661 237 104076 31 146252 104, 107
103136 261, 263 103669 245 104078 40 146253 104, 107
103137 261, 263 103672 247 104118 34 146254 104, 107
103138 262, 263 103673 247 104178 33 146256 104, 107
103139 262, 263 103680 240 104186 32 146257 85, 104, 107
103140 262, 263 103681 241 104192 38 146258 104
103141 262, 263 103682 242 104196 37 146260 104
103152 261, 263 103684 229 104257 221, 231 146261 104
103153 261, 263 103685 229 104271 261, 263 146262 104
103157 261, 263 103686 229 104272 261, 263 146264 104
103158 261, 263 103687 229 104317 121 146265 104
103164 85, 126 103688 221, 229 104319 128 146266 104
103165 127 103734 231 104361 250 146268 85, 104
103166 85, 122, 123, 103735 245 104362 245 146269 104
210, 255 103817 86, 100 104363 245 146270 104
103167 124, 125 103893 237 104438 234 146272 104
103168 85, 117, 118, 103894 237 104439 234 146273 104
210, 255
103895 239 104450 221, 248 146274 102, 107
103169 119, 120
103896 239 104477 29 146276 102, 107
103171 213
103897 231 104479 221, 222, 253 146277 102, 107
103185 107
103900 233 104480 221, 222, 253 146278 102, 107
103186 107
103901 233 104481 221, 222, 253 146280 102, 107
103233 147
103902 229 104482 221, 223 146281 85, 102, 107
103239 107
103903 229 104483 224 146282 102
103240 107
103904 247 104500 241 146284 102
103264 193, 201
103908 245 104503 239 146285 102
103268 259
103911 39 104505 254 146286 102
103291 199
103916 35 104506 254 146288 102
103321 107
103944 237 104549 44 146289 102
103322 107
103945 237 104550 45 146290 102
103327 107
103946 237 104583 282 146292 102
103328 107
103947 237 104584 282 146293 85, 102
103336 85, 146
103948 237 104652 15 146294 102
103340 261, 263
103949 237 104655 16 146296 102
103341 261, 263
103950 239 104656 16 146297 102
103349 281
103951 239 104666 30 146304 85, 103
103350 281
103952 239 104693 16 146305 103
103361 116
103953 239 104744 40 146306 85, 103
103414 85, 115
103954 239 104804 28 146307 103
103455 213
103955 239 104809 249 146308 85, 105
103542 85, 147
103956 231 104891 22 146309 105
103577 85, 163
103957 231 104892 21 146310 105
103634 247
103958 231 104893 21 146311 105
103635 247
103959 231 104894 19 146315 202

314
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Part Number Index


Part Number Index (Continued)

Part No. Page Part No. Page Part No. Page Part No. Page
146386 175 146852 107 147740 192 1375582 252
146427 85 146853 107 147741 192 1375583 252
146455 112 146858 107 147742 187 1375791 7, 12
146456 112 146859 107 147743 187 1375792 7
146457 112 146860 107 147744 187 1375793 7, 12
146458 112 146861 107 147745 190 1375794 7
146459 112 146868 107 147746 190 1375795 6, 12
146460 112 146869 107 147747 190 1375796 6
146461 112 146870 107 173144 155, 156 1375797 9
146462 112 146871 107 173145 155, 157, 158, 159 1375798 9
146463 112 147030 235 173146 155, 160, 161 1375799 8
146464 112 147070 86, 167 219054 58 1375800 8
146465 112 147071 167 219055 58 1375801 12
146466 112 147072 167 219137 58 1375959 10
146467 112 147095 183, 184 219138 58 1375961 10
146468 112 147096 183, 184 219253 58 1375963 10
146469 112 147099 182 382575 309 1375965 11
146470 112 147100 182 382811 308 1375967 11
146471 112 147101 190 390088 309 1445251 12
146472 112 147102 190 390102 310 1445439 12
146473 112 147103 190 487544 50 1445440 12
146474 86, 112 147104 192 487545 50 1445441 12
146475 112 147105 86, 192 487547 48 1470108 79
146476 112 147106 192 487576 54 1470109 78
146477 112 147121 16 487923 48 1470209 80
146478 112 147254 202 487937 52 1470213 66
146479 112 147278 251 487938 52 1734493 75
146480 112 147323 251 487940 48 1734506 81
146481 112 147324 251 487941 48 1734507 67
146482 112 147326 177 499991 205 1734508 66
146483 113 147333 86, 165 530153 310 1734516 84
146484 113 147334 165 530554 267 1734531 83
146485 113 147335 165 530901 269 1734569 77
146486 113 147377 44 530902 268 1734606 82
146487 113 147378 45 531226 267, 268 1734770 73
146488 113 147381 16 531230 308 1825190 307
146489 113 147382 16 532955 195 1825851 139, 140, 210
146490 85, 113 147383 16 532956 193, 195 2041068 76
146491 113 147384 15 533009 195 2041069 84
146492 113 147396 235 534204 195 5084476 71
146493 113 147413 15 534206 85, 176 5084780 74
146494 113 147424 176 534237 85, 175 5086147 294
146495 113 147433 165 534245 200 5086182 294
146496 113 147434 165 534257 198 5102084 170
146497 113 147435 165 534258 201 5102154 139, 210, 255
146498 113 147436 167 534267 85, 182 5102156 139
146499 113 147437 167 534972 193, 196 5102160 140
146500 113 147438 167 534974 193, 197 5102162 140
146501 113 147503 16 534975 195 5103308 135
146502 113 147720 86, 181 534978 198 5103309 135
146503 113 147723 188 534998 85, 179, 180 5103310 136
146504 113 147724 187 535541 85, 178 5103311 136
146505 113 147726 181 535542 86, 183, 184 5104338 137
146506 113 147727 181 535584 178 5104340 138
146507 113 147728 188 535585 179, 180 5111595 57
146508 113 147729 188 535598 179, 180 5146139 169
146509 113 147730 187 746383 139, 140 5146140 170
146510 113 147731 187 867052 207 5147721 86, 172
146762 176 147736 188 880584 309 5147722 86, 173
146763 175 147737 188 881545 309 5147732 172
146850 107 147738 86, 188 966926 72 5147733 172
146851 107 147739 192 1375549 252 5147734 173

315
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System
Part Number Index

Part Number Index (Continued)

Part No. Page Part No. Page Part No. Page Part No. Page
5147735 173 5178751 70 5531216 269 5535512 85, 170
5176264 70 5530553 269 5531224 269 5535676 85, 169
5176837 68 5530901 269 5531225 269 5535677 169

Tooling Part Number Index


Note: This index lists all cataloged parts Part No. Page Part No. Page Part No. Page
by base no. only. Complete part nos. (with
58062 273 104072 253 527116 263
prefixes and/or suffixes) are shown on the
page(s) indicated. 58074 273 217600 153, 164, 166, 303 543518 23
58075 273 224910 48, 60 547178 301
58336 273 265871 152 565967 286
58338 273 265964 152 567239 254
58342 254 308554 152 567296 222, 253
58395 273 312522 274 567297 222, 253
58540 273 318619 48, 60 567298 222, 253
58641 211, 213 354500 300 567307 211
90273 60 354786 275 567310 207
90274 290 356484 60 662820 303
90295 207 356500 300 679167 62
90308 298 380392 152 679996 207
90328 290 466007 298 758030 162
90381 211 466376 286 761420 275
90431 207 466562 213 768338 62
91047 60 466571 213 812665 263
91084 207 466655 213 843473 290
91085 62 466721 207 843477 253, 254, 265
91104 298 466723 269 843996 214, 215, 216,
91112 62 466763 290 217, 218, 219, 220
91169 152 466764 290 854040 301
91170 152 466812 211 854449 274
91171 152 466819 269 856002 274
91200 60 466905 213 856675 273
91295 23 466918 213 904507 163
91410 263 466921 213 904590 163
91419 163 466937 290 904591 163
91516 213 466943 269 904592 163
91517 211, 213 466950 298 904640 166
91518 222, 253 466952 269 904641 164
91531 254 466980 222, 253 907459 162
91533 207 466981 222, 253 931800 273
91541 213 466982 222, 253 1213400 300
91551 222, 253 466983 254

316
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Engineering Notes

317
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Engineering Notes

318
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Engineering Notes

319
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
AMPMODU Interconnection System

Engineering Notes

320
1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
FOR MORE INFORMATION
te.com/products/AMPMODUSystem50
te.com/products/AMPMODUMTE

TE Technical Support Center


Internet: te.com/help
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico +52 (0) 55-1106-0800
Latin/S. America: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015

Revised 8-11
Part numbers in this brochure are RoHS Compliant*, unless marked otherwise.
*as defined www.te.com/leadfree

Catalog 1307819
AMPMODU Interconnection System
AMPMODU
te.com

2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved.
Interconnection System
1307819 CIS WR 08/2011
AMP, ACTION PIN, AMP-LATCH, AMP-O-LECTRIC, AMP-O-MATIC, AMPLIMITE, AMPMODU, AMPOMATOR,
CERTI-CRIMP, CHAMPOMATOR, PRO-CRIMPER, R-CAM, TE Connectivity and the TE connectivity (logo)
are trademarks. Teflon is a trademark of E.I. du Pont de Nemours and Company.
Other logos, product and Company names mentioned herein may be trademarks of their respective owners.

While TE has made every reasonable effort to ensure the accuracy of the information in this catalog, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current.
TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all
implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or
fitness for a particular purpose. The dimensions in this catalog are for reference purposes only and are subject to change without notice.
Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications.

You might also like