Professional Documents
Culture Documents
NC II?
1. Make sure you are knowledgeable about static electricity or ESD, why do I say that?
Because I see some candidates or students taking this for granted and the result? The computer
have been damaged and can't even boot in BIOS settings.
2. Make sure you are familiar in the connection of Front Panel Led's in the motherboard
because not all mobo have the same standard in connecting this wire(s). And take note some
Assessor are very strict on this part, though your PC is working they will not accept incorrect
connection.
3. Be 90% calm and 10% nervous. Being nervous is really part of taking the assessment. :P
, if you're not then good for you :)
For OS Installation:
1. This is the easiest part, just make sure you install the operating system in its right
location I mean Drive C: (exception is for the dual OS). If you failed on this one it will consume
your time, always remember that the assessment has a time duration.
2. Install the appropriate drivers ONLY, Do not install other software included in the
CD/DVD installer (Ex. Adobe Acrobat etc.) it will just consume your time.
For Networking:
For Maintenance:
1. You should know how to:
1. This will be based in all the tasks that you will undergo in the assessment and some
theoretical knowledge when you are in college or training :)
If you are looking for the CSS NC II Reviewer, click
For OS Installation:
For Networking:
For Maintenance:
Tip: Bring your own Crimping Tool, hate to say this but some assessment center tools like this one is dull.
:P
Okay, lets talk about What's New in this modified qualification of Technical Education for Skills
Development Authority (TESDA) for Computer Hardware Servicing NC II that becomes Computer
Systems Servicing NC II. Lets compare the tasks that both qualification have:
In Computer Hardware Servicing NC II (CHS NC II), these are the tasks that you have to undergo:
Task 1: Write or Enumerate at least six Occupational Health Safety Policies and Procedures (OHS).
Task 2: Inventory all the Tools, Equipment, Materials and Work Area used or under CHS NC II.
And for Computer Systems Servicing NC II, these are the new tasks: