Professional Documents
Culture Documents
This is the preliminary edition of the manual, i.e. this entirety near the end of the project, is incorporated into
manual contains sections that are specific to the GT model Chapters 3.3 (Fault Rectification) and 3.4 (Maintenance).
but do not necessarily reflect the design details of the plant Consequently, these chapters contain a large amount of
as installed. This is because the final, customer-specific model-specific information.
design had not been finalized at the time this manual was In general, the preliminary edition of the manual is not
compiled. Furthermore, the latest design changes are updated. Instead, updates are incorporated into the final
implemented in the GT on site during commissioning edition of the manual, which replaces the preliminary
(whenever possible). edition. A preliminary edition of the records (Chapter 3.7) is
A great deal of information from the documentation for not provided, i.e. all records provided are integral
outsourced parts, which is generally only available in its components of the final edition of the manual.
The reproduction, transmission or use of this document
or its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of
a utility model or design, are reserved Class: RESTRICTED
Siemens AG 3.0-0004-0001
Power Generation 1203E-Y
Gas Turbine Manual Survey
General User Information
Product
Description
1 Description
Tab 1: 3.0 General User Information
Tab 2: 3.1 Description
authority. Offenders will be liable for damages. All rights,
The reproduction, transmission or use of this document
or its content is not permitted without express written
2 Operation
Tab 1: 3.3 Operation (Detailed information on this
topic is given in the Operating Manual for
a utility model or design, are reserved
3 Spare Parts
Tab 1: 3.6 General User Information
Tab 2: 3.6 Spare Parts List
Tab 3: 3.6 Parts Usage Tables
Tab 4: 3.6 Spare Parts Drawings
4 Test Records
Tab 1: 3.7 General User Information
Tab 2: 3.7 Factory Assembly
Tab 3: 3.7 Field Erection
Tab 4: 3.7 First Comissioning
Tab 5: 3.7 Test Records Forms,Minor Inspection
Tab 6: 3.7 Test Records Forms, During Operation
5 Tools
Tab 1: 3.8 General User Information
Tab 2: 3.8 Tool List, Tool Drawings and
Quality Documentation
Siemens AG 3.0-0005-0009
Power Generation 1005E-X
Gas Turbine Table of Contents
General User Information Preliminary Edition
Operating and
Maintenance Documentation
Product Description
Description 81/82/83/84.
MB.TP3.01+
Safety Instructions
a utility model or design, are reserved
Description Tab 2
Technical Data
Design Data
Design Data ............................................................................................................. 3.1-0100-0592 2)
Generator Output and -TII as a Function of Compressor Inlet Temperature,
Fuel Gas............................................................................................................... 3.1-0120-0592 2)
Generator Output and -TII as a Function of Compressor Inlet Temperature,
Fuel Oil ................................................................................................................. 3.1-0130-0592 2)
Specifications
Turbine Oil Specification .......................................................................................... 3.1-0250-9000/1-2 0200E-X
Specification for Hydraulic Oils ................................................................................ 3.1-0251-9000/1-2 0803E-X
1) preliminary 2) to be supplied later
Siemens AG 3.0-0010-0592/1
Power Generation MB 0306E-X
Gas Turbine Table of Contents
General User Information Preliminary Edition
Description of Components
MB Gas Turbine
General Design Features......................................................................................... 3.1-0300-9140/1-3 0405E-X
Intermediate Shaft ................................................................................................... 3.1-0320-0536 0704E-X
Manual Turning Gear............................................................................................... 3.1-0330-9001/1-2 1000E-X
MBA Compressor and Turbine
Longitudinal Section ................................................................................................ 3.1-0400-9080 0705E-X
Rotor ........................................................................................................................ 3.1-0410-9140 0704E-X
Compressor Rotor Blades ....................................................................................... 3.1-0420-9000 0106E-X
Turbine Moving Blades ............................................................................................ 3.1-0430-9100/1-2 0303E-X
Compressor Stationary Blade Assembly ................................................................. 3.1-0440-9100/1-2 0700E-X
Pitch Adjustment of Inlet Compressor Guide Vanes ................................................ 3.1-0450-9135 0705E-X
including rights created by patent grant or registration of
The reproduction, transmission or use of this document
or its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
Siemens AG 3.0-0010-0592/2
Power Generation MB 0306E-X
Gas Turbine Table of Contents
General User Information Preliminary Edition
Operation 81/82/83/84.
MB.TP3.02+
Class: RESTRICTED
Operation Tab 1
Notes on the Manual Section "Operation"................................................................ 3.3-0004-0001 1104E-Y
Siemens AG 3.0-0010-0592/3
Power Generation MB 0306E-X
Gas Turbine Table of Contents
General User Information Preliminary Edition
MB - Gas Turbine
Fault Rectification, General Remarks ...................................................................... 3.3-1700-9000 0499E-X
Instructions for Completing GTPRs ......................................................................... 3.3-1708-0001/1-4 0205E-Y
Completion of GTPRs.............................................................................................. 3.3-1709-0001/1-4 0205E-Y
Gas Turbine Performance Report............................................................................ 3.3-1710-0001/1-5 0205E-Y
Vibration .................................................................................................................. 3.3-1780-0001/1-11 0404E-Y
Maintenance Tab 3
Maintenance Description
Measures to be Implemented following Compressor Surging.................................. 3.4-1003-9000/1-2 0900E-X
NORD-LOCK Permanently Tight Washers .............................................................. 3.4-1004-0001/1-2 0200E-Y
Inspection of the Annular Combustion Chamber Lining after Hum-
ming/Accelerations ............................................................................................... 3.4-1007-9000/1-2 0901E-X
Testing of Flame Monitoring System ....................................................................... 3.4-5009-9000 0500E-X
Minor Inspection
General Component Testing.................................................................................... 3.4-8050-9000/1-3 1098E-X
Siemens AG 3.0-0010-0592/4
Power Generation MB 0306E-X
Gas Turbine Table of Contents
General User Information Preliminary Edition
Siemens AG 3.0-0010-0592/5
Power Generation MB 0306E-X
Gas Turbine Table of Contents
General User Information Preliminary Edition
Siemens AG 3.0-0010-0592/6
Power Generation MB 0306E-X
Gas Turbine Table of Contents
General User Information Preliminary Edition
MB.TP3.17+
Siemens AG 3.0-0010-0592/7
Power Generation MB 0306E-X
Gas Turbine Table of Contents
General User Information Preliminary Edition
Siemens AG 3.0-0010-0592/8
Power Generation MB 0306E-X
Gas Turbine Safety Notices
General User Information
Signal Words
nature or applies to a number of different turbine designs.
Further safety notices appear in the later sections of the All safety notices are introduced by a signal word. The
operating manual and apply in addition to the information signal words danger, warning, and caution facilitate
presented here. clear, prompt recognition of the meaning of the safety
a utility model or design, are reserved
Siemens AG 3.0-0500-0001/1
Power Generation MB 0105E-X
Gas Turbine Safety Notices
General User Information
Pictograms The signal effect of bold type is lost due to the sheer
To highlight the safety information contained in the text, number of safety notices in this section. The remaining
safety notices are combined with pictograms and the text safety notices in this document are therefore in plain text
printed in bold type. to enhance readability.
There are three categories of pictograms: Other manuals (e.g., operating manual) may in
Warning signs (outlined triangles with symbols in the some cases use different pictograms or signal
middle) e.g. words.
Risk of injury!
This pictogram precedes information, Identification of Important Information
orders, and prohibitions intended to
Tips on procedures, notes regarding necessary tools
prevent personal injury.
and materials, etc. or special information regarding
economical operation of the gas turbine are identified as
Risk of equipment damage!
follows:
This pictogram precedes information,
orders, and prohibitions intended to This pictogram precedes tips on economical
prevent damage to equipment. and effective work on the gas turbine.
Prohibitive signs (circles outlined in red with black
symbols on a white background) e.g. If notices occur in tables, no pictogram is used; instead,
including rights created by patent grant or registration of
The reproduction, transmission or use of this document
or its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
and prescriptions.
In the interest of clarity, warning notices presented in
tables are not accompanied by pictograms.
Siemens AG 3.0-0500-0001/2
Power Generation MB 0105E-X
Gas Turbine Safety Notices
General User Information
building, at the access points and on the It is the operator's responsibility to ensure
turbine itself. Ensure compliance with these that all hazardous materials on site are
orders and prohibitions by all personnel. properly labeled and safely stored and
handled. It must also be ensured that all
Wherever stipulated in regulations or
persons who come into contact with these
a utility model or design, are reserved
Siemens AG 3.0-0500-0001/3
Power Generation MB 0105E-X
Gas Turbine Safety Notices
General User Information
necessary. This also applies when working Work on the gas system shall be performed
in confined spaces (e.g., combustion only by officially-certified specialist
chamber). personnel. The Operator must obtain
Ensure that emergency exits, escape information regarding applicable local
routes, fire extinguishers, and emergency regulations and ensure compliance
switches are accessible at all times. therewith.
Ensure that all safety, protective and rescue Conduct of the personnel working on the GT
equipment is fully functional at all times. must be such that any risks are
Perform regular inspections to confirm this. prevented/reduced as far as possible. This
Protective equipment also includes also includes checking one's own work on
grounding connections. completion. In addition, checks of whether
all requisite safety measures have been
Equipment designed for use as climbing
taken must be made/called for prior to
aids (e.g., ladders) and which is in proper
performance of work.
working order shall be used whenever work
is performed a great height. New hazards (e.g., leaks) detected by
personnel must be immediately reported to
Cellular phones, two-way radios and CD
the responsible supervisor.
players prohibited!
Any employee who discovers while
To prevent possible interference with the performing work that associated hazards
GT control system, the use of cellular are greater than previously assumed (e.g.,
phones, two-way radios and CD players is loss of forced ventilation) shall discontinue
prohibited in the vicinity of the GT and GT this work and immediately consult the
control system equipment. responsible supervisor.
Class: RESTRICTED
Siemens AG 3.0-0500-0001/4
Power Generation MB 0105E-X
Gas Turbine Safety Notices
General User Information
ordered on the basis of the manufacturer's Always use lifting gear to lift/transport heavy
documentation (Section 3.9). items.
Spare parts must be stored so as to ensure Secure items being handled to reliably
their quality and functionality. prevent rolling, sliding and dropping.
Parts packed in plastic sheeting often Always take appropriate safety precautions
include a desiccant which must be when transporting hazardous materials.
periodically replaced or regenerated
(frequency of desiccant renewal is a By implementing the following measures
function of local conditions). you reduce or eliminate the risk of
equipment damage:
Apply supports and attach slings to turbine
Safety Notices Pertaining to Certain components at the intended points only.
Phases in the Service Life of Your Gas Do not remove packaging and protective
Turbine wrapping during transport.
Siemens AG 3.0-0500-0001/5
Power Generation MB 0105E-X
Gas Turbine Safety Notices
General User Information
parts.
Siemens AG 3.0-0500-0001/6
Power Generation MB 0105E-X
Gas Turbine Safety Notices
General User Information
Siemens AG 3.0-0500-0001/7
Power Generation MB 0105E-X
Gas Turbine Safety Notices
General User Information
injury.
The following safety notices pertain to service, repair Prior to commencing work on pressurized
and maintenance work, as well as rectification of GT faults: systems (pneumatic, hydraulic, fuel, etc.),
shut down the system and depressurize
By implementing the following measures
segments to be opened, considering
you reduce or eliminate the risk of injury:
dynamic pressures wherever these are
Safe and reliable operation of the GT can
involved. Always exercise due caution when
only be achieved by regular performance of
opening pipe unions. Failure to do so could
inspection and maintenance work. Further
result in injury from escaping media.
details can be found in the Section
"Maintenance". Fault rectification shall only be performed by
personnel already familiar with maintenance
Entering noise abatement shrouds and
work in the plant, because the brief wording
other enclosures during operation of the GT
of the tables in documents in chapter 3.3 of
is forbidden. Such areas shall be locked to
the Product Manual only points out certain
prevent unauthorized access.
special hazards.
No work shall be performed on the GT until
Tools and equipment for performing
after release has been given by the
inspection and major inspection work may
responsible party.
only be used by Siemens personnel or
Do not work on the gas turbine until it has under the supervision of a Siemens
come to a complete stop. Also ensure that supervisor.
interval turning of the GT is blocked. Do not
Only use tools and devices for their
start up gas turbine until all work has been
intended purpose. Observe load limits.
completed. Prior to startup, make certain
that the turbine is in a condition safe for Never use damaged tools or devices
operation. immediately repair or scrap such items.
Class: RESTRICTED
Siemens AG 3.0-0500-0001/8
Power Generation MB 0105E-X
Gas Turbine Safety Notices
General User Information
Inform operating personnel prior to the fuel gas from entering the combustion
commencement of maintenance, repair, or chamber and exhaust duct while these are
service work. Designate supervisory being worked on (toxic hazard).
personnel. Repairs to components that convey fuel
Should safety devices be removed, reinstall may be performed by Siemens or
them immediately after work has been manufacturer personnel only, not by
completed and check them for proper customer personnel. The components in
function. question include the fuel control and
Hydraulic hoses must be replaced every 6 emergency stop valves, fuel pumps and ball
years-regardless of how long the plant is valve assemblies.
actually in operation-(i.e., storage times Only Siemens personnel may perform major
must also be taken into account). inspections.
Work on the gas system shall be performed If any work (temporarily) blocks traffic
only by officially-certified specialist routes, appropriate signs and barricades
personnel. The Operator must obtain shall be put up to alert personnel.
information regarding applicable local
regulations and ensure compliance By implementing the following measures
therewith. you reduce or eliminate the risk of
explosion or fire:
Wear appropriate protective gear when
Work on piping must be performed by
including rights created by patent grant or registration of
The reproduction, transmission or use of this document
or its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
and combustion chamber/exhaust duct). cases this is only possible at the manu-
When opening a section of the fuel system, facturer's plant. Observe all manufacturer
for example, steps must be taken to prevent instructions regarding explosion protection.
Siemens AG 3.0-0500-0001/9
Power Generation MB 0105E-X
Gas Turbine Safety Notices
General User Information
Before commencing work on the fuel elements which deform plastically (e.g., lock
system, the respective section must be washers and locking strips for compressor
drained and inerted. and turbine blades) as well as soft iron
seals (e.g., manhole seals).
Fire, open flames and smoking prohibited!
Locking elements/seals must be replaced
Explosion and/or fire hazard: Do not smoke
after use with new items. Used locking
or use open flames when working on
elements and seals must be accounted for
systems which contain flammable media
and disposed of immediately to prevent
(e.g., fuel systems).
their reuse.
Isolate before commencing work!
Prior to commencing work on the GT or GT Cellular phones, two-way radios and CD
auxiliary systems, the respective system players prohibited!
section must be isolated (deenergize, To prevent possible interference with the
depressurize, inert, etc.). GT control system, the use of cellular
phones, two-way radios and CD players is
By implementing the following measures prohibited in the vicinity of the GT and GT
you eliminate the risk of burns: control system equipment. Such devices
Do not touch hot surfaces. During operation may also corrupt electronic measurements.
and after shutdown, many parts of the gas
turbine parts and its auxiliary systems are at Shutting Down the Gas Turbine
including rights created by patent grant or registration of
The reproduction, transmission or use of this document
or its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
By implementing the following measures Wait until the gas turbine has coasted to a
you reduce or eliminate the risk of complete stop. Failure to do so could result
equipment damage: in injury from rotating parts.
Remove tools and other foreign objects
By implementing the following measures
from the gas turbine immediately after use.
you reduce or eliminate the risk of
If system sections are opened to perform equipment damage:
work, cover these openings immediately. Perform measures to prevent corrosion of
This applies in particular to systems with the turbine.
direct access to the compressor or turbine.
Covers used for this purpose must be Mandatory Documentation:
sufficiently close fitting and strong to reliably Perform and record the results of
prevent the ingress of foreign objects. inspections prescribed for the shutdown
Ensure compliance with the prescribed process.
maintenance and inspection intervals and Prepare a report on the shutdown process.
the scope of work stipulated in the technical
documentation. Waste Disposal
Locking elements and seals are generally Whenever waste of any kind (e.g., lubricants) must be
Class: RESTRICTED
not designed for reuse (i.e., the locking or disposed of, ensure compliance with applicable local
sealing function cannot be guaranteed if regulations governing waste disposal procedures and
reused). This applies in particular to locking methods.
Siemens AG 3.0-0500-0001/10
Power Generation MB 0105E-X
Gas Turbine Safety Notices
General User Information
The following section includes safety notices and By implementing the following measures
instructions pertaining to the special hazard categories: you reduce or eliminate the risk of
stress fractures, required turning duration of the GT before equipment damage:
startup, heat, electrical energy, and noise. Discontinue interval turning only if this is
absolutely necessary, e.g., for performing
Stress Fractures maintenance work and operations such as
including rights created by patent grant or registration of
The reproduction, transmission or use of this document
or its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
Siemens AG 3.0-0500-0001/11
Power Generation MB 0105E-X
Gas Turbine Safety Notices
General User Information
Electrical Energy
Isolate before commencing work!
By implementing the following measures Electrically isolate all equipment on which
you reduce or eliminate the risk of electric maintenance or repair work is to be
shock: performed. First check to ensure that
Work on the gas turbines electrical system isolated components are deenergized, then
shall be performed only by a qualified ground them and isolate any adjacent
electrician or by trained personnel components which are still live.
instructed and directly supervised by a
qualified electrician and in compliance with Noise
the codes governing work on electrical
Hearing protection required!
equipment.
Wear hearing protection when near the gas
Check the gas turbines electrical turbine whenever it is running. Failure to do
equipment at regular intervals. Rectify so can cause permanent hearing loss due
deficiencies immediately. to GT operating noise.
Before work is performed near capacitors, The gas turbine produces a noise level of
these items must be fully discharged by a approximately 90 dB(A). Depending on local conditions
qualified electrician. (e.g., room configuration), this level may be even higher.
Such noise levels can cause permanent hearing loss.
including rights created by patent grant or registration of
The reproduction, transmission or use of this document
or its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
Siemens AG 3.0-0500-0001/12
Power Generation MB 0105E-X
to be
supplied
later
to be
supplied
later
to be
supplied
later
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
D.HOE.01 FUEL OIL DENSITY 845 kg/m FUEL OIL STANDART DENSITY, for calculation of valve-position
Siemens AG
E.EGDBSV.01 OUTPUT SIGNAL 19 mA POSITIONSENSOR-SIGNAL AT 0% NG-DM-CV-POSITION
E.EGDBSV.02 OUTPUT SIGNAL 6 mA POSITIONSENSOR-SIGNAL AT 100% NG-DM-CV-POSITION
E.EGDBSV.03 OUTPUT SIGNAL 19.8 mA Positionsensor signal range exceeded
E.EGVBSV.01 OUTPUT SIGNAL 19 mA POSITIONSENSOR-SIGNAL AT NG-PM-CV-POSITION 0%
E.EGVBSV.02 OUTPUT SIGNAL 6 mA POSITIONSENSOR-SIGNAL AT NG-PM-CV-POSITION 100%
E.EGVBSV.03 OUTPUT SIGNAL 19.8 mA Positionsensor signal range exceeded
POSITIONSENSOR-SIGNAL AT POSITION 0% (MECHANICAL CLOSED),
E.HDEWASV.01 OUTPUT SIGNAL 17 mA
HP-DM-Emulsion-CV/ESV
POSITIONSENSOR-SIGNAL AT POSITION 100% (NOMINAL Positon),
E.HDEWASV.02 OUTPUT SIGNAL 6 mA
HP-DM-Emulsion-CV/ESV
E.HOEDRSV.01 OUTPUT SIGNAL 17 mA POSITIONSENSOR-SIGNAL AT FO-DMRL-CV POSITION CLOSED
POSITIONSENSOR-SIGNAL AT FO-DMRL-CV POSITION OPEN (RATED
E.HOEDRSV.02 OUTPUT SIGNAL 6 mA
TRAVEL)
MB
E.HOEDRSV.03 OUTPUT SIGNAL 18 mA POSITIONSENSOR-SIGNAL FAULT
E.HOEDVSV.01 OUTPUT SIGNAL 17 mA POSITIONSENSOR-SIGNAL AT FO-DMFL-CV POSITION CLOSED
POSITIONSENSOR-SIGNAL AT FO-DMFL-CV POSITION OPEN (RATED
E.HOEDVSV.02 OUTPUT SIGNAL 6 mA
TRAVEL)
E.HOEDVSV.03 OUTPUT SIGNAL 18 mA POSITIONSENSOR-SIGNAL FAULT
E.HOEVBSV.04 OUTPUT SIGNAL 17 mA POSITIONSENSOR-SIGNAL AT FO-PM-CV-POSITION CLOSED
POSITIONSENSOR-SIGNAL AT FO-PM-CV-POSITION OPEN (RATED
Limits and Settings
TRAVEL)
E.HOEVBSV.06 OUTPUT SIGNAL 18 mA POSITIONSENSOR-SIGNAL FAULT
POSITIONSENSOR-SIGNAL AT POSITION 0% (MECHANICAL CLOSED),
E.HVEWASV.01 OUTPUT SIGNAL 17 mA
HP-PM-Emulsion-CV/ESV
POSITIONSENSOR-SIGNAL AT POSITION 100% (NOMINAL Positon),
E.HVEWASV.02 OUTPUT SIGNAL 6 mA
HP-PM-Emulsion-CV/ESV
E.LEIST.00 LOAD RANGE -20...310 MW LOAD RANGE FOR MEASURING AND INDICATION
E.LEIST.01 LOAD JUMP 5 MW LOAD JUMP AFTER SYNCHRONISING
E.LEIST.03 LOAD 46 -1 MW MIN. LOAD FOR MIX-FUEL-OPER.
E.LEIST.08 LOAD 11 +0.5 MW INTERLOCK DURING SHUT DOWN
0106E-X
3.1-0210-0592/1
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
E.LEIST.149 LOAD 20 %
Power Generation
ST- valve test
Technical Data
E.LEIST.15 LOAD SET POINT -20 MW LOWER LIMIT OF LOAD SET POINT
Siemens AG
E.LEIST.151 LOAD 40 % Load rejection: load limit for full load rejection (natural gas operation)
E.LEIST.152 LOAD 50 % Load rejection: load limit for full load rejection (fuel oil operation)
Ratio thermal load change / load change: measured load at load operation
E.LEIST.161 LOAD 280 MW
point
E.LEIST.169 LOAD 200 MW Load limit for acceleration for the akkumulation
E.LEIST.23 LOAD 301 MW MAX LOAD LIMIT
LOADREDUCTION AT COMBUSTION-CHAMBER-
E.LEIST.32 LOAD 6 MW
HUMMING/Acceleration, limit 1
LOADREDUCTION AT COMBUSTION-CHAMBER-
E.LEIST.33 LOAD 15 MW
HUMMING/Acceleration, limit 2
Generator on load, load jump is finished; Interlock manual operation blow
E.LEIST.35 LOAD 6 -2 MW
off flaps
E.LEIST.42 LOAD 2 +0.5 MW OPENING GENERATOR-BREAKER DURING SHUT-OFF
MB
E.LEIST.49 LOAD 31 MW UPPER LIMIT PRIMARY FREQU. INFLUENCE
E.LEIST.50 LOAD -31 MW LOWER LIMIT PRIMARY FREQU. INFLUENCE
E.LEIST.51 LOAD 80 MW MONITORING RANGE (+/-) PRIMARY FREQU.INFLUENCE
E.LEIST.GLGAS BASE LOAD, FUEL GAS 280 MW BASE LOAD, nat. GAS (ISO)
E.LEIST.GLOEL BASE LOAD, FUEL OIL 258.46 MW BASE LOAD, FUEL OIL (ISO)
E.PGSV.01 INPUT SIGNAL 13 mA POSITIONSENSOR-SIGNAL PG-CV IN POSITION 0%
Limits and Settings
List of Control Settings
0106E-X
3.1-0210-0592/2
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
FLOW
Power Generation
Technical Data
Siemens AG
CORR. VALUE NAT. GAS
F.EG.25 0 kg/s FG-DB-CORRECTION IGNITIONFLOW AT TT.ATK.45
FLOW
CORR. VALUE NAT. GAS
F.EG.26 0 kg/s FG-DB-CORRECTION IGNITIONFLOW AT TT.ATK.46
FLOW
F.EGDB.01 NAT.GAS FLOW 0.5 kg/s START/IGNITION MASS FLOW AT NG-START
F.EGDB.02 NAT.GAS FLOW 0.8 kg/s NG-FLOW AT CHANGEOVER FROM NG-PM TO NG DIFF. MODE
F.EGDB.03 NAT.GAS FLOW 1.2 kg/s MIN. FLOW AT LOAD REJECTION FROM NG DIFF. MODE OR NG-PM
F.EGDB.04 NAT.GAS FLOW 0.3 kg/s NG-FLOW AT CHANGEOVER FROM NG-DIFF. MODE TO NG-PM
F.EGDB.08 NAT.GAS DIFF. KV-VALUE. 0.000 m/h NG-DO-CV, position correction calculator, kv-value at G.EGDBST.01
F.EGDB.09 NAT.GAS DIFF. KV-VALUE. 0.540 m/h NG-DO-CV, position correction calculator, kv-value at G.EGDBST.02
F.EGDB.10 NAT.GAS DIFF. KV-VALUE. 0.930 m/h NG-DO-CV, position correction calculator, kv-value at G.EGDBST.03
F.EGDB.11 NAT.GAS DIFF. KV-VALUE. 1.726 m/h NG-DO-CV, position correction calculator, kv-value at G.EGDBST.04
MB
F.EGDB.12 NAT.GAS DIFF. KV-VALUE. 2.727 m/h NG-DO-CV, position correction calculator, kv-value at G.EGDBST.05
F.EGDB.13 NAT.GAS DIFF. KV-VALUE. 4.932 m/h NG-DO-CV, position correction calculator, kv-value at G.EGDBST.06
F.EGDB.14 NAT.GAS DIFF. KV-VALUE. 8.024 m/h NG-DO-CV, position correction calculator, kv-value at G.EGDBST.07
F.EGDB.15 NAT.GAS DIFF. KV-VALUE. 10.130 m/h NG-DO-CV, position correction calculator, kv-value at G.EGDBST.08
F.EGDB.16 NAT.GAS DIFF. KV-VALUE. 14.850 m/h NG-DO-CV, position correction calculator, kv-value at G.EGDBST.09
F.EGDB.17 NAT.GAS DIFF. KV-VALUE. 22.950 m/h NG-DO-CV, position correction calculator, kv-value at G.EGDBST.10
Limits and Settings
List of Control Settings
F.EGDB.18 NAT.GAS DIFF. KV-VALUE. 35.290 m/h NG-DO-CV, position correction calculator, kv-value at G.EGDBST.11
F.EGDB.19 NAT.GAS DIFF. KV-VALUE. 47.590 m/h NG-DO-CV, position correction calculator, kv-value at G.EGDBST.12
F.EGDB.20 NAT.GAS DIFF. KV-VALUE. 60.700 m/h NG-DO-CV, position correction calculator, kv-value at G.EGDBST.13
F.EGDB.21 NAT.GAS DIFF. KV-VALUE. 75.730 m/h NG-DO-CV, position correction calculator, kv-value at G.EGDBST.14
F.EGDB.22 NAT.GAS DIFF. KV-VALUE. 92.640 m/h NG-DO-CV, position correction calculator, kv-value at G.EGDBST.15
F.EGDB.23 NAT.GAS DIFF. KV-VALUE. 110.600 m/h NG-DO-CV, position correction calculator, kv-value at G.EGDBST.16
F.EGDB.24 NAT.GAS DIFF. KV-VALUE. 128.400 m/h NG-DO-CV, position correction calculator, kv-value at G.EGDBST.17
F.EGDB.29 NAT.GAS DIFF. KV-VALUE. 10.541 m/h NG-DM-burner, kv-value of one single burner
F.EGDB.30 NAT.GAS DIFF. KV-VALUE. 318 m/h NG-DM-burner, kv-value of piping
0106E-X
3.1-0210-0592/3
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
load rejection
Power Generation
Technical Data
F.EGDB.33 NAT.GAS FLOW 0.3 kg/s MINIMUM FLOW NG-DO-CV DURING LOAD REJEKTION FROM PO
Siemens AG
F.EGVB.01 NAT.GAS FLOW 1.0 kg/s NG-FLOW AT CHANGEOVER FROM NG-DIFF. MODE TO NG PM
F.EGVB.03 NAT.GAS FLOW 1.0 kg/s NG-FLOW AT CHANGEOVER FROM NG-PM TO NG-DIFF. MODE
F.EGVB.04 NAT.GAS PREM. KV-VALUE. 0.000 m/h NG-PO-CV, position correction calculator, kv-value at G.EGVBST.01
F.EGVB.05 NAT.GAS PREM. KV-VALUE. 2.158 m/h NG-PO-CV, position correction calculator, kv-value at G.EGVBST.02
F.EGVB.06 NAT.GAS PREM. KV-VALUE. 3.242 m/h NG-PO-CV, position correction calculator, kv-value at G.EGVBST.03
F.EGVB.07 NAT.GAS PREM. KV-VALUE. 5.063 m/h NG-PO-CV, position correction calculator, kv-value at G.EGVBST.04
F.EGVB.08 NAT.GAS PREM. KV-VALUE. 9.849 m/h NG-PO-CV, position correction calculator, kv-value at G.EGVBST.05
F.EGVB.09 NAT.GAS PREM. KV-VALUE. 23.200 m/h NG-PO-CV, position correction calculator, kv-value at G.EGVBST.06
F.EGVB.10 NAT.GAS PREM. KV-VALUE. 33.130 m/h NG-PO-CV, position correction calculator, kv-value at G.EGVBST.07
F.EGVB.11 NAT.GAS PREM. KV-VALUE. 38.170 m/h NG-PO-CV, position correction calculator, kv-value at G.EGVBST.08
F.EGVB.12 NAT.GAS PREM. KV-VALUE. 50.230 m/h NG-PO-CV, position correction calculator, kv-value at G.EGVBST.09
MB
F.EGVB.13 NAT.GAS PREM. KV-VALUE. 74.390 m/h NG-PO-CV, position correction calculator, kv-value at G.EGVBST.10
F.EGVB.14 NAT.GAS PREM. KV-VALUE. 132.200 m/h NG-PO-CV, position correction calculator, kv-value at G.EGVBST.11
F.EGVB.15 NAT.GAS PREM. KV-VALUE. 189.500 m/h NG-PO-CV, position correction calculator, kv-value at G.EGVBST.12
F.EGVB.16 NAT.GAS PREM. KV-VALUE. 245.500 m/h NG-PO-CV, position correction calculator, kv-value at G.EGVBST.13
F.EGVB.17 NAT.GAS PREM. KV-VALUE. 309.700 m/h NG-PO-CV, position correction calculator, kv-value at G.EGVBST.14
F.EGVB.18 NAT.GAS PREM. KV-VALUE. 365.800 m/h NG-PO-CV, position correction calculator, kv-value at G.EGVBST.15
F.EGVB.19 NAT.GAS PREM. KV-VALUE. 419.600 m/h NG-PO-CV, position correction calculator, kv-value at G.EGVBST.16
Limits and Settings
List of Control Settings
F.EGVB.20 NAT.GAS PREM. KV-VALUE. 470.600 m/h NG-PO-CV, position correction calculator, kv-value at G.EGVBST.17
F.EGVB.24 NAT.GAS PREM. KV-VALUE. 9.0602 m/h NG-PM-burner, kv-value of one single burner
F.EGVB.25 NAT.GAS PREM. KV-VALUE. 538 m/h NG-PM-burner, kv-value of piping
F.EGVB.26 NAT.GAS FLOW 1.30 kg/s NG-PM start mass flow for fuel change over FO -> NG-PM
F.EGVB.27 NAT.GAS FLOW 1.30 kg/s NG-PM minimum mass flow for fuel change over NG-PM -> FO
F.EGVB.28 NAT.GAS FLOW 0.6 kg/s NG-PM min flow during load rejection for G.PILOT.45
F.EGVB.29 NAT.GAS FLOW 0.6 kg/s NG-PM min flow during load rejection for G.PILOT.46
F.EGVB.30 NAT.GAS FLOW 0.6 kg/s NG-PM min flow during load rejection for G.PILOT.47
F.EGVB.31 NAT.GAS FLOW 0.6 kg/s NG-PM min flow during load rejection for G.PILOT.48
0106E-X
3.1-0210-0592/4
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
during load rejection
Technical Data
F.EGVB.36 NAT.GAS FLOW 5.2 kg/s MAX NG-PM-flow during load rejection
Siemens AG
F.EGVB.37 NAT.GAS FLOW 0.0 kg/s Additional NG-PM during NG-start with S.TURB.122
F.EGVB.38 NAT.GAS FLOW 0.7 kg/s Additional NG-PM during NG-start with S.TURB.122
F.EGVB.39 NAT.GAS FLOW 1.2 kg/s Additional NG-PM during NG-start with S.TURB.122
F.EGVB.40 NAT.GAS FLOW 1.4 kg/s Additional NG-PM during NG-start with S.TURB.122
F.EGVB.41 NAT.GAS FLOW 1.4 kg/s Additional NG-PM during NG-start with S.TURB.122
F.EGVB.42 NAT.GAS FLOW 1.4 kg/s Additional NG-PM during NG-start with S.TURB.122
KV-VALUE HP EMU WATER
F.HDEWAS.01 0.000 m/h KV-VALUE OF HP-EMU-CV-CHARACTERISTIC AT G.HDEWAS.01
CV
KV-VALUE HP EMU WATER
F.HDEWAS.02 0.001 m/h KV-VALUE OF HP-EMU-CV-CHARACTERISTIC AT G.HDEWAS.02
CV
KV-VALUE HP EMU WATER
F.HDEWAS.03 0.166 m/h KV-VALUE OF HP-EMU-CV-CHARACTERISTIC AT G.HDEWAS.03
CV
MB
KV-VALUE HP EMU WATER
F.HDEWAS.04 0.192 m/h KV-VALUE OF HP-EMU-CV-CHARACTERISTIC AT G.HDEWAS.04
CV
KV-VALUE HP EMU WATER
F.HDEWAS.05 0.411 m/h KV-VALUE OF HP-EMU-CV-CHARACTERISTIC AT G.HDEWAS.05
CV
KV-VALUE HP EMU WATER
F.HDEWAS.06 1.316 m/h KV-VALUE OF HP-EMU-CV-CHARACTERISTIC AT G.HDEWAS.06
CV
KV-VALUE HP EMU WATER
F.HDEWAS.07 1.884 m/h KV-VALUE OF HP-EMU-CV-CHARACTERISTIC AT G.HDEWAS.07
CV
Limits and Settings
0106E-X
3.1-0210-0592/5
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
CV
Power Generation
Technical Data
Siemens AG
KV-VALUE HP EMU WATER
F.HDEWAS.17 47.780 m/h KV-VALUE OF HP-EMU-CV-CHARACTERISTIC AT G.HDEWAS.17
CV
KV-VALUE HP EMU WATER
F.HDEWAS.21 0.000 m/h KV-VALUE OF HP-EMU-CV-CHARACTERISTIC AT G.HDEWAS.21
CV
KV-VALUE HP EMU WATER
F.HDEWAS.22 0.001 m/h KV-VALUE OF HP-EMU-CV-CHARACTERISTIC AT G.HDEWAS.22
CV
KV-VALUE HP EMU WATER
F.HDEWAS.23 0.166 m/h KV-VALUE OF HP-EMU-CV-CHARACTERISTIC AT G.HDEWAS.23
CV
KV-VALUE HP EMU WATER
F.HDEWAS.24 0.192 m/h KV-VALUE OF HP-EMU-CV-CHARACTERISTIC AT G.HDEWAS.24
CV
KV-VALUE HP EMU WATER
F.HDEWAS.25 0.411 m/h KV-VALUE OF HP-EMU-CV-CHARACTERISTIC AT G.HDEWAS.25
CV
KV-VALUE HP EMU WATER
F.HDEWAS.26 1.316 m/h KV-VALUE OF HP-EMU-CV-CHARACTERISTIC AT G.HDEWAS.26
CV
MB
KV-VALUE HP EMU WATER
F.HDEWAS.27 1.884 m/h KV-VALUE OF HP-EMU-CV-CHARACTERISTIC AT G.HDEWAS.27
CV
KV-VALUE HP EMU WATER
F.HDEWAS.28 2.153 m/h KV-VALUE OF HP-EMU-CV-CHARACTERISTIC AT G.HDEWAS.28
CV
KV-VALUE HP EMU WATER
F.HDEWAS.29 2.647 m/h KV-VALUE OF HP-EMU-CV-CHARACTERISTIC AT G.HDEWAS.29
CV
KV-VALUE HP EMU WATER
F.HDEWAS.30 3.351 m/h KV-VALUE OF HP-EMU-CV-CHARACTERISTIC AT G.HDEWAS.30
CV
Limits and Settings
List of Control Settings
0106E-X
3.1-0210-0592/6
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
Siemens AG
NOZZLE CHARACTERISTIC 1 FO-MASS FLOW AT
F.HOE.11 FUEL OIL FLOW 0 special
DPDBVL/RL=PP.HOE.11
DIFFUSION-FEEDLINE FLOW RATE AT DIFFUSION-INJECTION FLOW
F.HOE.111 FUEL OIL FLOW 14 kg/s
RATE F.HOE.91
DIFFUSION-FEEDLINE FLOW RATE AT DIFFUSION-INJECTION FLOW
F.HOE.112 FUEL OIL FLOW 14 kg/s
RATE F.HOE.92
DIFFUSION-FEEDLINE FLOW RATE AT DIFFUSION-INJECTION FLOW
F.HOE.113 FUEL OIL FLOW 14 kg/s
RATE F.HOE.93
DIFFUSION-FEEDLINE FLOW RATE AT DIFFUSION-INJECTION FLOW
F.HOE.114 FUEL OIL FLOW 14 kg/s
RATE F.HOE.94
DIFFUSION-FEEDLINE FLOW RATE AT DIFFUSION-INJECTION FLOW
F.HOE.115 FUEL OIL FLOW 14 kg/s
RATE F.HOE.95
DIFFUSION-FEEDLINE FLOW RATE AT DIFFUSION-INJECTION FLOW
F.HOE.116 FUEL OIL FLOW 15 kg/s
RATE F.HOE.96
MB
DIFFUSION-FEEDLINE FLOW RATE AT DIFFUSION-INJECTION FLOW
F.HOE.117 FUEL OIL FLOW 17 kg/s
RATE F.HOE.97
DIFFUSION-FEEDLINE FLOW RATE AT DIFFUSION-INJECTION FLOW
F.HOE.118 FUEL OIL FLOW 19 kg/s
RATE F.HOE.98
DIFFUSION-FEEDLINE FLOW RATE AT DIFFUSION-INJECTION FLOW
F.HOE.119 FUEL OIL FLOW 22 kg/s
RATE F.HOE.99
NOZZLE CHARACTERISTIC 1 FO-MASS FLOW AT
F.HOE.12 FUEL OIL FLOW 0.0024 special
DPDBVL/RL=PP.HOE.12
Limits and Settings
RATE F.HOE.100
NOZZLE CHARACTERISTIC 1 FO-MASS FLOW AT
F.HOE.13 FUEL OIL FLOW 0.008 special
DPDBVL/RL=PP.HOE.13
START-MIX-OP.: DIFFUSION-INJECTION FLOW RATE AT DIFFUSION-
F.HOE.131 FUEL OIL FLOW 0 kg/s
FEEDLINE FLOW RATEF.HOE.137
START-MIX-OP.: DIFFUSION-INJECTION FLOW RATE AT DIFFUSION-
F.HOE.132 FUEL OIL FLOW 2.16 kg/s
FEEDLINE FLOW RATEF.HOE.138
START-MIX-OP.: DIFFUSION-INJECTION FLOW RATE AT DIFFUSION-
F.HOE.133 FUEL OIL FLOW 4 kg/s
FEEDLINE FLOW RATEF.HOE.139
START-MIX-OP.: DIFFUSION-INJECTION FLOW RATE AT DIFFUSION-
F.HOE.134 FUEL OIL FLOW 10 kg/s
FEEDLINE FLOW RATEF.HOE.140
0106E-X
3.1-0210-0592/7
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
Siemens AG
START-MIX-OP.: DIFFUSION-FEEDLINE FLOW RATE AT DIFFUSION-
F.HOE.138 FUEL OIL FLOW 2.16 kg/s
INJECTION FLOW RATE F.HOE.132
START-MIX-OP.: DIFFUSION-FEEDLINE FLOW RATE AT DIFFUSION-
F.HOE.139 FUEL OIL FLOW 4 kg/s
INJECTION FLOW RATE F.HOE.133
NOZZLE CHARACTERISTIC 1 FO-MASS FLOW AT
F.HOE.14 FUEL OIL FLOW 0.012 special
DPDBVL/RL=PP.HOE.14
START-MIX-OP.: DIFFUSION-FEEDLINE FLOW RATE AT DIFFUSION-
F.HOE.140 FUEL OIL FLOW 10 kg/s
INJECTION FLOW RATE F.HOE.134
START-MIX-OP.: DIFFUSION-FEEDLINE FLOW RATE AT DIFFUSION-
F.HOE.141 FUEL OIL FLOW 14 kg/s
INJECTION FLOW RATE F.HOE.135
START-MIX-OP.: DIFFUSION-FEEDLINE FLOW RATE AT DIFFUSION-
F.HOE.142 FUEL OIL FLOW 24.5 kg/s
INJECTION FLOW RATE F.HOE.136
F.HOE.143 IGNITION FLOW ADAPTION 0.06 kg/s FO-IGNITION-FLOW ADAPTION AT TT.ATK.41
MB
F.HOE.144 IGNITION FLOW ADAPTION 0.03 kg/s FO-IGNITION-FLOW ADAPTION AT TT.ATK.42
F.HOE.145 IGNITION FLOW ADAPTION 0 kg/s FO-IGNITION-FLOW ADAPTION AT TT.ATK.43
F.HOE.146 IGNITION FLOW ADAPTION 0 kg/s FO-IGNITION-FLOW ADAPTION AT TT.ATK.44
F.HOE.147 IGNITION FLOW ADAPTION -0.01 kg/s FO-IGNITION-FLOW ADAPTION AT TT.ATK.45
F.HOE.148 IGNITION FLOW ADAPTION -0.03 kg/s FO-IGNITION-FLOW ADAPTION AT TT.ATK.46
NOZZLE CHARACTERISTIC 1 FO-MASS FLOW AT
F.HOE.15 FUEL OIL FLOW 0.017 special
DPDBVL/RL=PP.HOE.15
Limits and Settings
0106E-X
3.1-0210-0592/8
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
DPDBVL/RL=PP.HOE.23
Power Generation
Technical Data
Siemens AG
NOZZLE CHARACTERISTIC 1 FO-MASS FLOW AT
F.HOE.25 FUEL OIL FLOW 0.401 special
DPDBVL/RL=PP.HOE.25
NOZZLE CHARACTERISTIC 1 FO-MASS FLOW AT
F.HOE.26 FUEL OIL FLOW 0.5012 special
DPDBVL/RL=PP.HOE.26
NOZZLE CHARACTERISTIC 1 FO-MASS FLOW AT
F.HOE.27 FUEL OIL FLOW 0.6015 special
DPDBVL/RL=PP.HOE.27
NOZZLE CHARACTERISTIC 1 FO-MASS FLOW AT
F.HOE.28 FUEL OIL FLOW 0.7017 special
DPDBVL/RL=PP.HOE.28
NOZZLE CHARACTERISTIC 1 FO-MASS FLOW AT
F.HOE.29 FUEL OIL FLOW 0.8521 special
DPDBVL/RL=PP.HOE.29
NOZZLE CHARACTERISTIC 1 FO-MASS FLOW AT
F.HOE.30 FUEL OIL FLOW 1.0049 special
DPDBVL/RL=PP.HOE.30
NOZZLE CHARACTERISTIC 2 FO-MASS FLOW AT
F.HOE.31 FUEL OIL FLOW 0 special
DPDBVL/RL=PP.HOE.31
MB
NOZZLE CHARACTERISTIC 2 FO-MASS FLOW AT
F.HOE.32 FUEL OIL FLOW 0.0024 special
DPDBVL/RL=PP.HOE.32
NOZZLE CHARACTERISTIC 2 FO-MASS FLOW AT
F.HOE.33 FUEL OIL FLOW 0.008 special
DPDBVL/RL=PP.HOE.33
NOZZLE CHARACTERISTIC 2 FO-MASS FLOW AT
F.HOE.34 FUEL OIL FLOW 0.012 special
DPDBVL/RL=PP.HOE.35
NOZZLE CHARACTERISTIC 2 FO-MASS FLOW AT
F.HOE.35 FUEL OIL FLOW 0.017 special
DPDBVL/RL=PP.HOE.36
Limits and Settings
List of Control Settings
0106E-X
3.1-0210-0592/9
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
DPDBVL/RL=PP.HOE.43
Power Generation
Technical Data
Siemens AG
NOZZLE CHARACTERISTIC 2 FO-MASS FLOW AT
F.HOE.45 FUEL OIL FLOW 0.401 special
DPDBVL/RL=PP.HOE.45
NOZZLE CHARACTERISTIC 2 FO-MASS FLOW AT
F.HOE.46 FUEL OIL FLOW 0.5012 special
DPDBVL/RL=PP.HOE.46
NOZZLE CHARACTERISTIC 2 FO-MASS FLOW AT
F.HOE.47 FUEL OIL FLOW 0.6015 special
DPDBVL/RL=PP.HOE.47
NOZZLE CHARACTERISTIC 2 FO-MASS FLOW AT
F.HOE.48 FUEL OIL FLOW 0.7017 special
DPDBVL/RL=PP.HOE.48
NOZZLE CHARACTERISTIC 2 FO-MASS FLOW AT
F.HOE.49 FUEL OIL FLOW 0.8521 special
DPDBVL/RL=PP.HOE.49
NOZZLE CHARACTERISTIC 2 FO-MASS FLOW AT
F.HOE.50 FUEL OIL FLOW 1.0049 special
DPDBVL/RL=PP.HOE.50
F.HOE.51 FUEL OIL FLOW 0 m/h KV-VALUE OF FO-CV-CHARACTERISTIC AT G.OELST.21
MB
F.HOE.52 FUEL OIL FLOW 0.23 m/h KV-VALUE OF FO-CV-CHARACTERISTIC AT G.OELST.22
F.HOE.53 FUEL OIL FLOW 0.61 m/h KV-VALUE OF FO-CV-CHARACTERISTIC AT G.OELST.23
F.HOE.54 FUEL OIL FLOW 1.65 m/h KV-VALUE OF FO-CV-CHARACTERISTIC AT G.OELST.24
F.HOE.55 FUEL OIL FLOW 3.82 m/h KV-VALUE OF FO-CV-CHARACTERISTIC AT G.OELST.25
F.HOE.56 FUEL OIL FLOW 7.67 m/h KV-VALUE OF FO-CV-CHARACTERISTIC AT G.OELST.26
F.HOE.57 FUEL OIL FLOW 13.58 m/h KV-VALUE OF FO-CV-CHARACTERISTIC AT G.OELST.27
F.HOE.58 FUEL OIL FLOW 21.52 m/h KV-VALUE OF FO-CV-CHARACTERISTIC AT G.OELST.28
Limits and Settings
List of Control Settings
0106E-X
3.1-0210-0592/10
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
Siemens AG
DIFFUSION-INJECTION FLOW RATE AT DIFFUSION-FEEDLINE FLOW
F.HOE.93 FUEL OIL FLOW 7 kg/s
RATEF.HOE.113
DIFFUSION-INJECTION FLOW RATE AT DIFFUSION-FEEDLINE FLOW
F.HOE.94 FUEL OIL FLOW 8 kg/s
RATEF.HOE.114
DIFFUSION-INJECTION FLOW RATE AT DIFFUSION-FEEDLINE FLOW
F.HOE.95 FUEL OIL FLOW 10 kg/s
RATEF.HOE.115
DIFFUSION-INJECTION FLOW RATE AT DIFFUSION-FEEDLINE FLOW
F.HOE.96 FUEL OIL FLOW 12 kg/s
RATEF.HOE.116
DIFFUSION-INJECTION FLOW RATE AT DIFFUSION-FEEDLINE FLOW
F.HOE.97 FUEL OIL FLOW 14 kg/s
RATEF.HOE.117
DIFFUSION-INJECTION FLOW RATE AT DIFFUSION-FEEDLINE FLOW
F.HOE.98 FUEL OIL FLOW 16 kg/s
RATEF.HOE.118
DIFFUSION-INJECTION FLOW RATE AT DIFFUSION-FEEDLINE FLOW
F.HOE.99 FUEL OIL FLOW 19 kg/s
RATEF.HOE.119
MB
F.HOEDB.01 FUEL OIL FLOW 0.38 kg/s START MASS FLOW AT FO-START
F.HOEDB.03 FUEL OIL FLOW 0.72 kg/s MIN FLOW AT FO-DIFF. MODE, LOAD REJECTION
F.HOEDB.04 FUEL OIL FLOW 0.29 kg/s PILOT OIL MASS FLOW FO-DIFF. MODE AT PREMIX MODE
F.HOEDB.06 FUEL OIL FLOW 0.72 kg/s ADD. FLOW OF FO AT fuel change over
F.HOEDB.07 FUEL OIL FLOW 3.00 kg/s MIN FLOW DIFF. MODE AT PM-TRIP
F.HOEDB.09 FUEL OIL FLOW 3 kg/s FUEL-FLOW DURING FLUSH-OPERATION FO-DIFF.
F.HOEDB.11 FUEL OIL FLOW 0 m/h KV-VALUE OF FO-DIFF-FEEDLINE-VALVE AT G.OELST.41
Limits and Settings
List of Control Settings
0106E-X
3.1-0210-0592/11
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
Siemens AG
F.HOEDB.25 FUEL OIL FLOW 44.62 m/h KV-VALUE OF FO-DIFF-FEEDLINE-VALVE AT G.OELST.55
F.HOEDB.26 FUEL OIL FLOW 58.52 m/h KV-VALUE OF FO-DIFF-FEEDLINE-VALVE AT G.OELST.56
F.HOEDB.27 FUEL OIL FLOW 68.77 m/h KV-VALUE OF FO-DIFF-FEEDLINE-VALVE AT G.OELST.57
PRESSURE DROOP VALUE ALONG FO-DIFF-FEED-LINE FROM FO-
F.HOEDB.31 FUEL OIL FLOW 0 ---
FEED-CV UP TO BURNER NOZZLES
PRESSURE DROOP VALUE ALONG FO-DIFF-RETURN-LINE FROM
F.HOEDB.32 FUEL OIL FLOW 0 ---
BURNER NOZZLES UP TO FO-RETURN-CV
F.HOEDB.33 FUEL OIL FLOW 0.75 kg/s MINIMUM FLOW OF FO AT fuel change over
F.HOEDB.34 FUEL OIL FLOW 8 kg/s FO-DM FEEDING MINIMUM FLOW
F.HOEDB.35 FUEL OIL FLOW 20 kg/s FO-DM RETURN MINIMUM FLOW
F.HOEDB.36 FUEL OIL FLOW 4 kg/s FO-DM FEEDING FLOW DURING FO-PM PILOTING
F.HOEDB.37 FUEL OIL FLOW 0 --- FO-Nozzlecharacteristic adaption parameter feed line
MB
F.HOEDB.38 FUEL OIL FLOW 0 --- FO-Nozzlecharacteristic adaption parameter return line
F.HOEDB.39 FUEL OIL FLOW 0 --- correction curve proportional injected fuel
F.HOEDB.40 FUEL OIL FLOW 0.2 --- correction curve proportional injected fuel
F.HOEDB.41 FUEL OIL FLOW 0.3 --- correction curve proportional injected fuel
F.HOEDB.42 FUEL OIL FLOW 0.5 --- correction curve proportional injected fuel
F.HOEDB.43 FUEL OIL FLOW 0.7 --- correction curve proportional injected fuel
F.HOEDB.44 FUEL OIL FLOW 1 --- correction curve proportional injected fuel
Limits and Settings
List of Control Settings
F.HOEVB.01 FUEL OIL FLOW 3.80 kg/s ADD.FLOW OF PM-BURNER AT CHANGEOVER DM -> PM
F.HOEVB.02 FUEL OIL FLOW 3.80 kg/s Minimumflow FOPM
F.HOEVB.03 FUEL OIL FLOW 3.80 kg/s SHUTOFF FLOW OF PM-BURNER AT CHANGEOVER PM -> DM
PM-NOZZLE CALC. FORM. CONVERSION FACTOR PRESS. DIFF. TO
F.HOEVB.05 FUEL OIL FLOW 0.0817 ---
MASS FLOW
FUEL-FLOW DURING FLUSH-OPERATION FO-PREMIX,
F.HOEVB.06 FUEL OIL FLOW 2 kg/s
Normalswitchover
F.HOEVB.07 FUEL OIL FLOW 3.5 kg/s FUEL-FLOW DURING FLUSH-OPERATION FO-PREMIX, fast switchover
F.HOEVB.08 FUEL OIL FLOW 3.80 kg/s Minimumflow FOPO during changeover FOPO-->FODO
F.HOEVB.09 FUEL OIL FLOW 3.80 kg/s Minimumflow FOPO during changeover FODO-->FOPO
0106E-X
3.1-0210-0592/12
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
Siemens AG
F.HOEVB.15 FUEL OIL FLOW 0.61 m/h KV-VALUE OF FO-PREMIX-VALVE AT G.OELST.65
F.HOEVB.16 FUEL OIL FLOW 1.06 m/h KV-VALUE OF FO-PREMIX-VALVE AT G.OELST.66
F.HOEVB.17 FUEL OIL FLOW 1.37 m/h KV-VALUE OF FO-PREMIX-VALVE AT G.OELST.67
F.HOEVB.18 FUEL OIL FLOW 1.65 m/h KV-VALUE OF FO-PREMIX-VALVE AT G.OELST.68
F.HOEVB.19 FUEL OIL FLOW 2.35 m/h KV-VALUE OF FO-PREMIX-VALVE AT G.OELST.69
F.HOEVB.20 FUEL OIL FLOW 3.82 m/h KV-VALUE OF FO-PREMIX-VALVE AT G.OELST.70
F.HOEVB.21 FUEL OIL FLOW 7.67 m/h KV-VALUE OF FO-PREMIX-VALVE AT G.OELST.71
F.HOEVB.22 FUEL OIL FLOW 13.58 m/h KV-VALUE OF FO-PREMIX-VALVE AT G.OELST.72
F.HOEVB.23 FUEL OIL FLOW 21.52 m/h KV-VALUE OF FO-PREMIX-VALVE AT G.OELST.73
F.HOEVB.24 FUEL OIL FLOW 32.35 m/h KV-VALUE OF FO-PREMIX-VALVE AT G.OELST.74
F.HOEVB.25 FUEL OIL FLOW 44.62 m/h KV-VALUE OF FO-PREMIX-VALVE AT G.OELST.75
F.HOEVB.26 FUEL OIL FLOW 58.52 m/h KV-VALUE OF FO-PREMIX-VALVE AT G.OELST.76
MB
F.HOEVB.27 FUEL OIL FLOW 68.77 m/h KV-VALUE OF FO-PREMIX-VALVE AT G.OELST.77
F.HOEVB.31 FUEL OIL FLOW 3.80 kg/s MIN FLOW FO PREMIX OPERATION, REFERENCE VALUE
COMPRESSOR LIMIT CHARACTERISTICS: COORDINATES FOR MASS
F.LSV.01 COMPRESSOR CHARACT. 60 %
FLOW
COMPRESSOR LIMIT CHARACTERISTICS: COORDINATES FOR MASS
F.LSV.02 COMPRESSOR CHARACT. 65 %
FLOW
COMPRESSOR LIMIT CHARACTERISTICS: COORDINATES FOR MASS
Limits and Settings
0106E-X
3.1-0210-0592/13
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
VAL.
Power Generation
Technical Data
Siemens AG
KV-VALUE PILOTGAS CONTR.
F.PILOT.05 0.546 m/h KV-VALUE AT G:PILOT.30
VAL.
KV-VALUE PILOTGAS CONTR.
F.PILOT.06 1.406 m/h KV-VALUE AT G:PILOT.31
VAL.
KV-VALUE PILOTGAS CONTR.
F.PILOT.07 2.009 m/h KV-VALUE AT G:PILOT.32
VAL.
KV-VALUE PILOTGAS CONTR.
F.PILOT.08 2.413 m/h KV-VALUE AT G:PILOT.33
VAL.
KV-VALUE PILOTGAS CONTR.
F.PILOT.09 3.205 m/h KV-VALUE AT G:PILOT.34
VAL.
KV-VALUE PILOTGAS CONTR.
F.PILOT.10 4.711 m/h KV-VALUE AT G:PILOT.35
VAL.
KV-VALUE PILOTGAS CONTR.
F.PILOT.11 7.568 m/h KV-VALUE AT G:PILOT.36
VAL.
MB
additv Pilotgasflow during the filling of the fuel oil diffusion feed line (fuel
F.PILOT.110 Pilotgas mass flow 0.15 kg/s
change over FG-PM -> FO)
additv Pilotgasflow during the fushing of the fuel oil diffusion feed line (fuel
F.PILOT.111 Pilotgas mass flow 0.15 kg/s
change over FO -> FG-PM)
additv Pilotgasflow during fuel change over FO -> FG-PM before finish
F.PILOT.112 Pilotgas mass flow 0.3 kg/s
flushing
F.PILOT.113 PILOTGAS CONTR. VAL. 1 kg/s additiv Pilotgasflow for NG-PM at TT.ATK.102, low heat value
Limits and Settings
F.PILOT.114 PILOTGAS CONTR. VAL. 1 kg/s additiv Pilotgasflow for NG-PM at TT.ATK.103, low heat value
List of Control Settings
F.PILOT.115 PILOTGAS CONTR. VAL. 0.5 kg/s additiv Pilotgasflow for NG-PM at TT.ATK.104, low heat value
F.PILOT.116 PILOTGAS CONTR. VAL. 0.25 kg/s additiv Pilotgasflow for NG-PM at TT.ATK.105, low heat value
F.PILOT.117 PILOTGAS CONTR. VAL. 0 kg/s additiv Pilotgasflow for NG-PM at TT.ATK.106, low heat value
F.PILOT.118 PILOTGAS CONTR. VAL. 0 kg/s additiv Pilotgasflow for NG-PM at TT.ATK.107, low heat value
1.0 (NG only)
F.PILOT.119 PILOTGAS CONTR. VAL. / 1.25 (dual kg/s Pilotgasflow for NG-PM at G.VLE0.54, low heat value
fuel)
KV-VALUE PILOTGAS CONTR.
F.PILOT.12 12.47 m/h KV-VALUE AT G:PILOT.37
VAL.
0106E-X
3.1-0210-0592/14
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
0.85 (NG
Power Generation
Technical Data
F.PILOT.121 PILOTGAS CONTR. VAL. only) / 0.8 kg/s Pilotgasflow for NG-PM at G.VLE0.56, low heat value
(dual fuel)
Siemens AG
0.8 (NG only)
F.PILOT.122 PILOTGAS CONTR. VAL. / 0.8 (dual kg/s Pilotgasflow for NG-PM at G.VLE0.57, low heat value
fuel)
0.8 (NG only)
F.PILOT.123 PILOTGAS CONTR. VAL. / 0.8 (dual kg/s Pilotgasflow for NG-PM at G.VLE0.58, low heat value
fuel)
0.8 (NG only)
F.PILOT.124 PILOTGAS CONTR. VAL. / 0.8 (dual kg/s Pilotgasflow for NG-PM at G.VLE0.59, low heat value
fuel)
KV-VALUE PILOTGAS CONTR.
F.PILOT.13 17.79 m/h KV-VALUE AT G:PILOT.38
VAL.
KV-VALUE PILOTGAS CONTR.
F.PILOT.14 23.24 m/h KV-VALUE AT G:PILOT.39
VAL.
KV-VALUE PILOTGAS CONTR.
F.PILOT.15 28.29 m/h KV-VALUE AT G:PILOT.40
MB
VAL.
KV-VALUE PILOTGAS CONTR.
F.PILOT.16 32.03 m/h KV-VALUE AT G:PILOT.41
VAL.
KV-VALUE PILOTGAS CONTR.
F.PILOT.17 35.22 m/h KV-VALUE AT G:PILOT.42
VAL.
F.PILOT.21 PILOTGAS CONTR. VAL. -0.01 kg/s Pilotgasflow for NG-DM at E.BEZLEIST.05 / TT.ATK.48
F.PILOT.22 PILOTGAS CONTR. VAL. -0.01 kg/s Pilotgasflow for NG-DM at E.BEZLEIST.06 / TT.ATK.49
F.PILOT.23 PILOTGAS CONTR. VAL. -0.01 kg/s Pilotgasflow for NG-DM at E.BEZLEIST.07 / TT.ATK.50
Limits and Settings
List of Control Settings
F.PILOT.24 PILOTGAS CONTR. VAL. -0.01 kg/s Pilotgasflow for NG-DM at E.BEZLEIST.08 / TT.ATK.51
F.PILOT.25 PILOTGAS CONTR. VAL. -0.01 kg/s Pilotgasflow for NG-DM at E.BEZLEIST.09 / TT.ATK.52
F.PILOT.26 PILOTGAS CONTR. VAL. -0.01 kg/s Pilotgasflow for NG-DM at E.BEZLEIST.10 / TT.ATK.53
F.PILOT.27 PILOTGAS CONTR. VAL. 3.4 kg/s upper limit pilotgasflow, norm factor for 100% pilot gas mass flow
F.PILOT.28 PILOTGAS CONTR. VAL. 0.23 kg/s upper limit pilotgasflow
F.PILOT.30 PILOTGAS CONTR. VAL. -0.01 kg/s pilotgasflow for start up GT
F.PILOT.33 PILOTGAS CONTR. VAL. -0.01 kg/s Pilotgasflow for NG-DMPM-MM at E.BEZLEIST.11 / TT.ATK.54
F.PILOT.34 PILOTGAS CONTR. VAL. -0.01 kg/s Pilotgasflow for NG-DMPM-MM at E.BEZLEIST.12 / TT.ATK.55
F.PILOT.35 PILOTGAS CONTR. VAL. -0.01 kg/s Pilotgasflow for NG-DMPM-MM at E.BEZLEIST.13 / TT.ATK.56
0106E-X
3.1-0210-0592/15
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
F.PILOT.39 PILOTGAS CONTR. VAL. 1.25 kg/s Pilotgasflow for NG-PM at E.BEZLEIST.17 / G.VLE0.08
Siemens AG
F.PILOT.40 PILOTGAS CONTR. VAL. 1.25 kg/s Pilotgasflow for NG-PM at E.BEZLEIST.18 / G.VLE0.09
F.PILOT.41 PILOTGAS CONTR. VAL. 0.8 kg/s Pilotgasflow for NG-PM at E.BEZLEIST.19 / G.VLE0.10
F.PILOT.42 PILOTGAS CONTR. VAL. 0.8 kg/s Pilotgasflow for NG-PM at E.BEZLEIST.20 / G.VLE0.11
F.PILOT.43 PILOTGAS CONTR. VAL. 0.8 kg/s Pilotgasflow for NG-PM at E.BEZLEIST.21 / G.VLE0.12
F.PILOT.44 PILOTGAS CONTR. VAL. 0.8 kg/s Pilotgasflow for NG-PM at E.BEZLEIST.22 / G.VLE0.13
F.PILOT.59 PILOTGAS KV-VALUE. 1.73 m/h Pilotgas-burner, kv-value of one single burner
F.PILOT.60 PILOTGAS KV-VALUE. 32.0 m/h Pilotgas system, kv-value of piping
F.PILOT.63 PILOTGAS CONTR. VAL. 1.25 kg/s Pilotgasflow for fuel changeover FO -> NG-PM at G.VLE0.24
F.PILOT.64 PILOTGAS CONTR. VAL. 1.25 kg/s Pilotgasflow for fuel changeover FO -> NG-PM at G.VLE0.25
F.PILOT.65 PILOTGAS CONTR. VAL. 0.8 kg/s Pilotgasflow for fuel changeover FO -> NG-PM at G.VLE0.26
F.PILOT.66 PILOTGAS CONTR. VAL. 0.8 kg/s Pilotgasflow for fuel changeover FO -> NG-PM at G.VLE0.27
F.PILOT.67 PILOTGAS CONTR. VAL. 0.8 kg/s Pilotgasflow for fuel changeover FO -> NG-PM at G.VLE0.28
MB
F.PILOT.68 PILOTGAS CONTR. VAL. 0.8 kg/s Pilotgasflow for fuel changeover FO -> NG-PM at G.VLE0.29
F.PILOT.69 PILOTGAS CONTR. VAL. 1 kg/s additiv Pilotgasflow for NG-PM at TT.ATK.70
F.PILOT.70 PILOTGAS CONTR. VAL. 1 kg/s additiv Pilotgasflow for NG-PM at TT.ATK.71
F.PILOT.71 PILOTGAS CONTR. VAL. 0.5 kg/s additiv Pilotgasflow for NG-PM at TT.ATK.72
F.PILOT.72 PILOTGAS CONTR. VAL. 0.25 kg/s additiv Pilotgasflow for NG-PM at TT.ATK.73
F.PILOT.73 PILOTGAS CONTR. VAL. 0 kg/s additiv Pilotgasflow for NG-PM at TT.ATK.74
Limits and Settings
List of Control Settings
F.PILOT.74 PILOTGAS CONTR. VAL. 0 kg/s additiv Pilotgasflow for NG-PM at TT.ATK.75
F.PILOT.77 PILOTGAS CONTR. VAL. 0 kg/s additv Pilotgasflow for NG-PM at TT.ATK.80
F.PILOT.78 PILOTGAS CONTR. VAL. 0 kg/s additv Pilotgasflow for NG-PM at TT.ATK.81
F.PILOT.79 PILOTGAS CONTR. VAL. 0 kg/s additv Pilotgasflow for NG-PM at TT.ATK.82
F.PILOT.80 PILOTGAS CONTR. VAL. 0 kg/s additv Pilotgasflow for NG-PM at TT.ATK.83
F.PILOT.81 PILOTGAS CONTR. VAL. 0 kg/s additv Pilotgasflow for NG-PM at TT.ATK.84
F.PILOT.82 PILOTGAS CONTR. VAL. 0 kg/s additv Pilotgasflow for NG-PM at TT.ATK.85
F.PILOT.84 Pilotgas mass flow 0.1 kg/s signal closed pilotgas for fuel change over NG -> FO
F.PILOT.86 Pilotgas mass flow 2 kg/s Pilotgasflow for NG-PM at loadrejection at G.VLE0.45
0106E-X
3.1-0210-0592/16
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
F.PILOT.90 Pilotgas mass flow 2.3 kg/s Pilotgasflow for NG-PM at loadrejection at G.VLE0.49
Siemens AG
F.PILOT.91 Pilotgas mass flow 2.3 kg/s Pilotgasflow for NG-PM at loadrejection at G.VLE0.50
F.PILOT.92 Pilotgas mass flow 0.08 kg/s additv Pilotgasflow for NG-PM at T.VI.26
F.PILOT.93 Pilotgas mass flow 0.08 kg/s additv Pilotgasflow for NG-PM at T.VI.27
F.PILOT.94 Pilotgas mass flow 0.06 kg/s additv Pilotgasflow for NG-PM at T.VI.28
F.PILOT.95 Pilotgas mass flow 0.04 kg/s additv Pilotgasflow for NG-PM at T.VI.29
F.PILOT.96 Pilotgas mass flow 0 kg/s additv Pilotgasflow for NG-PM at T.VI.30
F.PILOT.97 Pilotgas mass flow 0 kg/s additv Pilotgasflow for NG-PM at T.VI.31
F.SPUDB.01 PURGE WATER FLOW 3.75 kg/s purge water flow fuel oil diffusion feed line
purge water flow , injection mass flow at compressor outlet pressure
F.SPUDB.02 PURGE WATER FLOW 1.4 kg/s
P:VII.15
purge water flow , injection mass flow at compressor outlet pressure
F.SPUDB.03 PURGE WATER FLOW 1.4 kg/s
P:VII.16
MB
purge water flow , injection mass flow at compressor outlet pressure
F.SPUDB.04 PURGE WATER FLOW 1.4 kg/s
P:VII.17
purge water flow , injection mass flow at compressor outlet pressure
F.SPUDB.05 PURGE WATER FLOW 1.8 kg/s
P:VII.23
purge water flow , injection mass flow at compressor outlet pressure
F.SPUDB.06 PURGE WATER FLOW 2.3 kg/s
P:VII.24
purge water flow , injection mass flow at compressor outlet pressure
F.SPUDB.07 PURGE WATER FLOW 2.3 kg/s
P:VII.25
Limits and Settings
0106E-X
3.1-0210-0592/17
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
G.EGDBST.04 NG-CONTROL VALVE DIFF. 7% NG-DO-CV, Position correction calculator, position at F.EGDB.11
Siemens AG
G.EGDBST.05 NG-CONTROL VALVE DIFF. 10 % NG-DO-CV, Position correction calculator, position at F.EGDB.12
G.EGDBST.06 NG-CONTROL VALVE DIFF. 15 % NG-DO-CV, Position correction calculator, position at F.EGDB.13
G.EGDBST.07 NG-CONTROL VALVE DIFF. 18 % NG-DO-CV, Position correction calculator, position at F.EGDB.14
G.EGDBST.08 NG-CONTROL VALVE DIFF. 20 % NG-DO-CV, Position correction calculator, position at F.EGDB.15
G.EGDBST.09 NG-CONTROL VALVE DIFF. 24 % NG-DO-CV, Position correction calculator, position at F.EGDB.16
G.EGDBST.10 NG-CONTROL VALVE DIFF. 30 % NG-DO-CV, Position correction calculator, position at F.EGDB.17
G.EGDBST.11 NG-CONTROL VALVE DIFF. 40 % NG-DO-CV, Position correction calculator, position at F.EGDB.18
G.EGDBST.12 NG-CONTROL VALVE DIFF. 50 % NG-DO-CV, Position correction calculator, position at F.EGDB.19
G.EGDBST.13 NG-CONTROL VALVE DIFF. 60 % NG-DO-CV, Position correction calculator, position at F.EGDB.20
G.EGDBST.14 NG-CONTROL VALVE DIFF. 70 % NG-DO-CV, Position correction calculator, position at F.EGDB.21
G.EGDBST.15 NG-CONTROL VALVE DIFF. 80 % NG-DO-CV, Position correction calculator, position at F.EGDB.22
G.EGDBST.16 NG-CONTROL VALVE DIFF. 90 % NG-DO-CV, Position correction calculator, position at F.EGDB.23
MB
G.EGDBST.17 NG-CONTROL VALVE DIFF. 100 % NG-DO-CV, Position correction calculator, position at F.EGDB.24
G.EGDBST.21 NG-CONTROL VALVE DIFF. > 1.0 % Position sensors, deviation monitoring
G.EGDBST.22 NG-CONTROL VALVE DIFF. > 1.0 % Control valve, monitoring of closed position
G.EGDBST.23 NG-CONTROL VALVE DIFF. < -1.0 % Control valve, position too low
G.EGVBST.01 NG-CONTROL VALVE PREM. 0% NG-PO-CV , Position correction calculator, position at F.EGVB.04
G.EGVBST.02 NG-CONTROL VALVE PREM. 3% NG-PO-CV , Position correction calculator, position at F.EGVB.05
Limits and Settings
List of Control Settings
G.EGVBST.03 NG-CONTROL VALVE PREM. 5% NG-PO-CV , Position correction calculator, position at F.EGVB.06
G.EGVBST.04 NG-CONTROL VALVE PREM. 7% NG-PO-CV , Position correction calculator, position at F.EGVB.07
G.EGVBST.05 NG-CONTROL VALVE PREM. 10 % NG-PO-CV , Position correction calculator, position at F.EGVB.08
G.EGVBST.06 NG-CONTROL VALVE PREM. 15 % NG-PO-CV , Position correction calculator, position at F.EGVB.09
G.EGVBST.07 NG-CONTROL VALVE PREM. 18 % NG-PO-CV , Position correction calculator, position at F.EGVB.10
G.EGVBST.08 NG-CONTROL VALVE PREM. 20 % NG-PO-CV , Position correction calculator, position at F.EGVB.11
G.EGVBST.09 NG-CONTROL VALVE PREM. 24 % NG-PO-CV , Position correction calculator, position at F.EGVB.12
G.EGVBST.10 NG-CONTROL VALVE PREM. 30 % NG-PO-CV , Position correction calculator, position at F.EGVB.13
G.EGVBST.11 NG-CONTROL VALVE PREM. 40 % NG-PO-CV , Position correction calculator, position at F.EGVB.14
0106E-X
3.1-0210-0592/18
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
G.EGVBST.15 NG-CONTROL VALVE PREM. 80 % NG-PO-CV , Position correction calculator, position at F.EGVB.18
Siemens AG
G.EGVBST.16 NG-CONTROL VALVE PREM. 90 % NG-PO-CV , Position correction calculator, position at F.EGVB.19
G.EGVBST.17 NG-CONTROL VALVE PREM. 100 % NG-PO-CV , Position correction calculator, position at F.EGVB.20
G.EGVBST.21 NG-CONTROL VALVE PREM. > 1.0 % Position sensors, deviation monitoring
G.EGVBST.22 NG-CONTROL VALVE PREM. > 1.0 % Control valve, monitoring of closed position
G.EGVBST.23 NG-CONTROL VALVE PREM. < -1.0 % Control valve, position too low
POSITION CONROLLER OUTPUT IF POSITION-SENSOR-BREAK-
G.GASST.09 NAT. GAS CONTR. VAL. -10 %
DOWN,NG
G.GASST.10 NAT. GAS CONTR. VAL. 90 % Position controller monitoring of the operation point
HP-EMU-DM-WATER
G.HDEDWAS.01 1 -0.2 % Position sensors, deviation monitoring
CONTROL VALVE
HP-EMU-DM-WATER
G.HDEDWAS.02 > 1.0 % Control valve, monitoring of closed position
CONTROL VALVE
HP-EMU-DM-WATER
G.HDEDWAS.03 < -1.0 % Control valve, position too low
MB
CONTROL VALVE
HP-EMU-PM-WATER
G.HDEVWAS.01 1 -0.2 % Position sensors, deviation monitoring
CONTROL VALVE
HP-EMU-PM-WATER
G.HDEVWAS.02 > 1.0 % Control valve, monitoring of closed position
CONTROL VALVE
HP-EMU-PM-WATER
G.HDEVWAS.03 < -1.0 % Control valve, position too low
CONTROL VALVE
HP-EMU-WATER CONTROL POSITION HP-EMU-WATER CONTROL VALVE FOR DIFF MODE AT
Limits and Settings
G.HDEWAS.01 0.00 %
VALVE F.HDEWAS.01
List of Control Settings
0106E-X
3.1-0210-0592/19
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
VALVE F.HDEWAS.08
Power Generation
Technical Data
Siemens AG
HP-EMU-WATER CONTROL POSITION HP-EMU-WATER CONTROL VALVE FOR DIFF MODE AT
G.HDEWAS.10 30.00 %
VALVE F.HDEWAS.10
HP-EMU-WATER CONTROL POSITION HP-EMU-WATER CONTROL VALVE FOR DIFF MODE AT
G.HDEWAS.11 40.00 %
VALVE F.HDEWAS.11
HP-EMU-WATER CONTROL POSITION HP-EMU-WATER CONTROL VALVE FOR DIFF MODE AT
G.HDEWAS.12 50.00 %
VALVE F.HDEWAS.12
HP-EMU-WATER CONTROL POSITION HP-EMU-WATER CONTROL VALVE FOR DIFF MODE AT
G.HDEWAS.13 60.00 %
VALVE F.HDEWAS.13
HP-EMU-WATER CONTROL POSITION HP-EMU-WATER CONTROL VALVE FOR DIFF MODE AT
G.HDEWAS.14 70.00 %
VALVE F.HDEWAS.14
HP-EMU-WATER CONTROL POSITION HP-EMU-WATER CONTROL VALVE FOR DIFF MODE AT
G.HDEWAS.15 80.00 %
VALVE F.HDEWAS.15
HP-EMU-WATER CONTROL POSITION HP-EMU-WATER CONTROL VALVE FOR DIFF MODE AT
G.HDEWAS.16 90.00 %
VALVE F.HDEWAS.16
MB
HP-EMU-WATER CONTROL POSITION HP-EMU-WATER CONTROL VALVE FOR DIFF MODE AT
G.HDEWAS.17 100.00 %
VALVE F.HDEWAS.17
HP-EMU-WATER CONTROL POSITION HP-EMU-WATER CONTROL VALVE FOR PREM MODE AT
G.HDEWAS.21 0.00 %
VALVE F.HDEWAS.21
HP-EMU-WATER CONTROL POSITION HP-EMU-WATER CONTROL VALVE FOR PREM MODE AT
G.HDEWAS.22 3.00 %
VALVE F.HDEWAS.22
HP-EMU-WATER CONTROL POSITION HP-EMU-WATER CONTROL VALVE FOR PREM MODE AT
G.HDEWAS.23 5.00 %
VALVE F.HDEWAS.23
Limits and Settings
List of Control Settings
0106E-X
3.1-0210-0592/20
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
VALVE F.HDEWAS.31
Power Generation
Technical Data
Siemens AG
HP-EMU-WATER CONTROL POSITION HP-EMU-WATER CONTROL VALVE FOR PREM MODE AT
G.HDEWAS.33 60.00 %
VALVE F.HDEWAS.33
HP-EMU-WATER CONTROL POSITION HP-EMU-WATER CONTROL VALVE FOR PREM MODE AT
G.HDEWAS.34 70.00 %
VALVE F.HDEWAS.34
HP-EMU-WATER CONTROL POSITION HP-EMU-WATER CONTROL VALVE FOR PREM MODE AT
G.HDEWAS.35 80.00 %
VALVE F.HDEWAS.35
HP-EMU-WATER CONTROL POSITION HP-EMU-WATER CONTROL VALVE FOR PREM MODE AT
G.HDEWAS.36 90.00 %
VALVE F.HDEWAS.36
HP-EMU-WATER CONTROL POSITION HP-EMU-WATER CONTROL VALVE FOR PREM MODE AT
G.HDEWAS.37 100.00 %
VALVE F.HDEWAS.37
G.HOE.01 PUMP CHARACTERISTIC 1438 m DISCHARGE HEAD OF CENTRIFUGAL PUMP AT F.VHOE.01
G.HOE.02 PUMP CHARACTERISTIC 1405 m DISCHARGE HEAD OF CENTRIFUGAL PUMP AT F.VHOE.02
G.HOE.03 PUMP CHARACTERISTIC 1370 m DISCHARGE HEAD OF CENTRIFUGAL PUMP AT F.VHOE.03
MB
G.HOE.04 PUMP CHARACTERISTIC 1331 m DISCHARGE HEAD OF CENTRIFUGAL PUMP AT F.VHOE.04
G.HOE.05 PUMP CHARACTERISTIC 1282 m DISCHARGE HEAD OF CENTRIFUGAL PUMP AT F.VHOE.05
G.HOE.06 PUMP CHARACTERISTIC 1208 m DISCHARGE HEAD OF CENTRIFUGAL PUMP AT F.VHOE.06
G.HOEDB.02 FUEL OIL CONTR. VAL. 14.0 % START POSITION OF FO-DM-CV AT MIXING OF FO TO NG
FUEL OIL DM-RETURN-
G.HOEDRSV.01 > 1.0 Position sensors, deviation monitoring
CONTR. VAL.
FUEL OIL DM-RETURN-
Limits and Settings
0106E-X
3.1-0210-0592/21
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
G.OELST.21 FUEL OIL CONTR. VAL. 0.00 % POSITION FUEL OIL CONTROL VALVE AT F.HOE.51
Siemens AG
G.OELST.22 FUEL OIL CONTR. VAL. 5.00 % POSITION FUEL OIL CONTROL VALVE AT F.HOE.52
G.OELST.23 FUEL OIL CONTR. VAL. 10.00 % POSITION FUEL OIL CONTROL VALVE AT F.HOE.53
G.OELST.24 FUEL OIL CONTR. VAL. 20.00 % POSITION FUEL OIL CONTROL VALVE AT F.HOE.54
G.OELST.25 FUEL OIL CONTR. VAL. 30.00 % POSITION FUEL OIL CONTROL VALVE AT F.HOE.55
G.OELST.26 FUEL OIL CONTR. VAL. 40.00 % POSITION FUEL OIL CONTROL VALVE AT F.HOE.56
G.OELST.27 FUEL OIL CONTR. VAL. 50.00 % POSITION FUEL OIL CONTROL VALVE AT F.HOE.57
G.OELST.28 FUEL OIL CONTR. VAL. 60.00 % POSITION FUEL OIL CONTROL VALVE AT F.HOE.58
G.OELST.29 FUEL OIL CONTR. VAL. 70.00 % POSITION FUEL OIL CONTROL VALVE AT F.HOE.59
G.OELST.30 FUEL OIL CONTR. VAL. 80.00 % POSITION FUEL OIL CONTROL VALVE AT F.HOE.60
G.OELST.31 FUEL OIL CONTR. VAL. 85.00 % POSITION FUEL OIL CONTROL VALVE AT F.HOE.61
G.OELST.32 FUEL OIL CONTR. VAL. 90.00 % POSITION FUEL OIL CONTROL VALVE AT F.HOE.62
G.OELST.33 FUEL OIL CONTR. VAL. 92.00 % POSITION FUEL OIL CONTROL VALVE AT F.HOE.63
MB
G.OELST.34 FUEL OIL CONTR. VAL. 94.00 % POSITION FUEL OIL CONTROL VALVE AT F.HOE.64
G.OELST.35 FUEL OIL CONTR. VAL. 96.00 % POSITION FUEL OIL CONTROL VALVE AT F.HOE.65
G.OELST.36 FUEL OIL CONTR. VAL. 98.00 % POSITION FUEL OIL CONTROL VALVE AT F.HOE.66
G.OELST.37 FUEL OIL CONTR. VAL. 100.00 % POSITION FUEL OIL CONTROL VALVE AT F.HOE.67
G.OELST.41 FUEL OIL CONTR. VAL. 0.00 % POSITION FO-DIFF-FEEDLINE-CONTROL VALVE AT F.HOEDB.11
G.OELST.42 FUEL OIL CONTR. VAL. 3.00 % POSITION FO-DIFF-FEEDLINE-CONTROL VALVE AT F.HOEDB.12
Limits and Settings
List of Control Settings
G.OELST.43 FUEL OIL CONTR. VAL. 5.00 % POSITION FO-DIFF-FEEDLINE-CONTROL VALVE AT F.HOEDB.13
G.OELST.44 FUEL OIL CONTR. VAL. 7.00 % POSITION FO-DIFF-FEEDLINE-CONTROL VALVE AT F.HOEDB.14
G.OELST.45 FUEL OIL CONTR. VAL. 10.00 % POSITION FO-DIFF-FEEDLINE-CONTROL VALVE AT F.HOEDB.15
G.OELST.46 FUEL OIL CONTR. VAL. 15.00 % POSITION FO-DIFF-FEEDLINE-CONTROL VALVE AT F.HOEDB.16
G.OELST.47 FUEL OIL CONTR. VAL. 18.00 % POSITION FO-DIFF-FEEDLINE-CONTROL VALVE AT F.HOEDB.17
G.OELST.48 FUEL OIL CONTR. VAL. 20.00 % POSITION FO-DIFF-FEEDLINE-CONTROL VALVE AT F.HOEDB.18
G.OELST.49 FUEL OIL CONTR. VAL. 24.00 % POSITION FO-DIFF-FEEDLINE-CONTROL VALVE AT F.HOEDB.19
G.OELST.50 FUEL OIL CONTR. VAL. 30.00 % POSITION FO-DIFF-FEEDLINE-CONTROL VALVE AT F.HOEDB.20
G.OELST.51 FUEL OIL CONTR. VAL. 40.00 % POSITION FO-DIFF-FEEDLINE-CONTROL VALVE AT F.HOEDB.21
0106E-X
3.1-0210-0592/22
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
G.OELST.55 FUEL OIL CONTR. VAL. 80.00 % POSITION FO-DIFF-FEEDLINE-CONTROL VALVE AT F.HOEDB.25
Siemens AG
G.OELST.56 FUEL OIL CONTR. VAL. 90.00 % POSITION FO-DIFF-FEEDLINE-CONTROL VALVE AT F.HOEDB.26
G.OELST.57 FUEL OIL CONTR. VAL. 100.00 % POSITION FO-DIFF-FEEDLINE-CONTROL VALVE AT F.HOEDB.27
G.OELST.61 FUEL OIL CONTR. VAL. 0% POSITION FO-PREMIX-CONTROL VALVE AT F.HOEVB.11
G.OELST.62 FUEL OIL CONTR. VAL. 3% POSITION FO-PREMIX-CONTROL VALVE AT F.HOEVB.12
G.OELST.63 FUEL OIL CONTR. VAL. 5% POSITION FO-PREMIX-CONTROL VALVE AT F.HOEVB.13
G.OELST.64 FUEL OIL CONTR. VAL. 7% POSITION FO-PREMIX-CONTROL VALVE AT F.HOEVB.14
G.OELST.65 FUEL OIL CONTR. VAL. 10 % POSITION FO-PREMIX-CONTROL VALVE AT F.HOEVB.15
G.OELST.66 FUEL OIL CONTR. VAL. 15 % POSITION FO-PREMIX-CONTROL VALVE AT F.HOEVB.16
G.OELST.67 FUEL OIL CONTR. VAL. 18 % POSITION FO-PREMIX-CONTROL VALVE AT F.HOEVB.17
G.OELST.68 FUEL OIL CONTR. VAL. 20 % POSITION FO-PREMIX-CONTROL VALVE AT F.HOEVB.18
G.OELST.69 FUEL OIL CONTR. VAL. 24 % POSITION FO-PREMIX-CONTROL VALVE AT F.HOEVB.19
G.OELST.70 FUEL OIL CONTR. VAL. 30 % POSITION FO-PREMIX-CONTROL VALVE AT F.HOEVB.20
MB
G.OELST.71 FUEL OIL CONTR. VAL. 40 % POSITION FO-PREMIX-CONTROL VALVE AT F.HOEVB.21
G.OELST.72 FUEL OIL CONTR. VAL. 50 % POSITION FO-PREMIX-CONTROL VALVE AT F.HOEVB.22
G.OELST.73 FUEL OIL CONTR. VAL. 60 % POSITION FO-PREMIX-CONTROL VALVE AT F.HOEVB.23
G.OELST.74 FUEL OIL CONTR. VAL. 70 % POSITION FO-PREMIX-CONTROL VALVE AT F.HOEVB.24
G.OELST.75 FUEL OIL CONTR. VAL. 80 % POSITION FO-PREMIX-CONTROL VALVE AT F.HOEVB.25
G.OELST.76 FUEL OIL CONTR. VAL. 90 % POSITION FO-PREMIX-CONTROL VALVE AT F.HOEVB.26
Limits and Settings
List of Control Settings
G.OELST.77 FUEL OIL CONTR. VAL. 100 % POSITION FO-PREMIX-CONTROL VALVE AT F.HOEVB.27
G.PILOT.19 PILOTGAS CONTR. VAL. 90 % PG-CV: monitoring of the operation point
POSITION CONROLLER OUTPUT IF POSITION-SENSOR-BREAK-
G.PILOT.21 PILOTGAS CONTR. VAL. 5%
DOWN, PG-CV
PG-SV, POSITION CORRECTION CALCULATOR, POSITION OF PG-
G.PILOT.26 PILOTGAS CONTR. VAL. 0%
CTR-V. AT F.PILOT.01
PG-SV, POSITION CORRECTION CALCULATOR, POSITION OF PG-
G.PILOT.27 PILOTGAS CONTR. VAL. 3%
CTR-V. AT F.PILOT.02
PG-SV, POSITION CORRECTION CALCULATOR, POSITION OF PG-
G.PILOT.28 PILOTGAS CONTR. VAL. 5%
CTR-V. AT F.PILOT.03
PG-SV, POSITION CORRECTION CALCULATOR, POSITION OF PG-
G.PILOT.29 PILOTGAS CONTR. VAL. 7%
CTR-V. AT F.PILOT.04
0106E-X
3.1-0210-0592/23
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
CTR-V. AT F.PILOT.06
Power Generation
Technical Data
Siemens AG
PG-SV, POSITION CORRECTION CALCULATOR, POSITION OF PG-
G.PILOT.33 PILOTGAS CONTR. VAL. 20 %
CTR-V. AT F.PILOT.08
PG-SV, POSITION CORRECTION CALCULATOR, POSITION OF PG-
G.PILOT.34 PILOTGAS CONTR. VAL. 24 %
CTR-V. AT F.PILOT.09
PG-SV, POSITION CORRECTION CALCULATOR, POSITION OF PG-
G.PILOT.35 PILOTGAS CONTR. VAL. 30 %
CTR-V. AT F.PILOT.10
PG-SV, POSITION CORRECTION CALCULATOR, POSITION OF PG-
G.PILOT.36 PILOTGAS CONTR. VAL. 40 %
CTR-V. AT F.PILOT.11
PG-SV, POSITION CORRECTION CALCULATOR, POSITION OF PG-
G.PILOT.37 PILOTGAS CONTR. VAL. 50 %
CTR-V. AT F.PILOT.12
PG-SV, POSITION CORRECTION CALCULATOR, POSITION OF PG-
G.PILOT.38 PILOTGAS CONTR. VAL. 60 %
CTR-V. AT F.PILOT.13
PG-SV, POSITION CORRECTION CALCULATOR, POSITION OF PG-
G.PILOT.39 PILOTGAS CONTR. VAL. 70 %
CTR-V. AT F.PILOT.14
MB
PG-SV, POSITION CORRECTION CALCULATOR, POSITION OF PG-
G.PILOT.40 PILOTGAS CONTR. VAL. 80 %
CTR-V. AT F.PILOT.15
PG-SV, POSITION CORRECTION CALCULATOR, POSITION OF PG-
G.PILOT.41 PILOTGAS CONTR. VAL. 90 %
CTR-V. AT F.PILOT.16
PG-SV, POSITION CORRECTION CALCULATOR, POSITION OF PG-
G.PILOT.42 PILOTGAS CONTR. VAL. 100 %
CTR-V. AT F.PILOT.17
G.PILOT.86 PILOTGAS CONTR. VAL. > 1.0 % Position sensors, deviation monitoring
Limits and Settings
G.PILOT.87 PILOTGAS CONTR. VAL. > 1.0 % Control valve, monitoring of closed position
List of Control Settings
G.PILOT.88 PILOTGAS CONTR. VAL. < -1.0 % Control valve, position too low
PILOTGAS MASS FLOW FOR NG-PM, REFERENCE POINT FOR
G.VLE0.08 POS., COMPR.I.G.V. 0%
F.PILOT.39
PILOTGAS MASS FLOW FOR NG-PM, REFERENCE POINT FOR
G.VLE0.09 POS., COMPR.I.G.V. 10 %
F.PILOT.40
PILOTGAS MASS FLOW FOR NG-PM, REFERENCE POINT FOR
G.VLE0.10 POS., COMPR.I.G.V. 40 %
F.PILOT.41
PILOTGAS MASS FLOW FOR NG-PM, REFERENCE POINT FOR
G.VLE0.11 POS., COMPR.I.G.V. 60 %
F.PILOT.42
PILOTGAS MASS FLOW FOR NG-PM, REFERENCE POINT FOR
G.VLE0.12 POS., COMPR.I.G.V. 90 %
F.PILOT.43
0106E-X
3.1-0210-0592/24
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
angle
Power Generation
Technical Data
Degree of
G.VLE0.16 POS., COMPR.I.G.V. 7.7 Beta-Bi-angle of compr. IGV MAX-operation-position (100%)
angle
Siemens AG
PILOTGAS MASS FLOW FOR fuel changeover FO <->NG-PM,
G.VLE0.24 POS., COMPR.I.G.V. 0%
REFERENCE POINT FOR F.PILOT.63
PILOTGAS MASS FLOW FOR fuel changeover FO <->NG-PM,
G.VLE0.25 POS., COMPR.I.G.V. 10 %
REFERENCE POINT FOR F.PILOT.64
PILOTGAS MASS FLOW FOR fuel changeover FO <->NG-PM,
G.VLE0.26 POS., COMPR.I.G.V. 30 %
REFERENCE POINT FOR F.PILOT.65
PILOTGAS MASS FLOW FOR fuel changeover FO <->NG-PM,
G.VLE0.27 POS., COMPR.I.G.V. 70 %
REFERENCE POINT FOR F.PILOT.66
PILOTGAS MASS FLOW FOR fuel changeover FO <->NG-PM,
G.VLE0.28 POS., COMPR.I.G.V. 98 %
REFERENCE POINT FOR F.PILOT.67
PILOTGAS MASS FLOW FOR fuel changeover FO <->NG-PM,
G.VLE0.29 POS., COMPR.I.G.V. 100 %
REFERENCE POINT FOR F.PILOT.68
minimum position for compressor inlet guide vane for manual operation and
G.VLE0.36 POS., COMPR.I.G.V. 0%
indication
MB
maximum position for compressor inlet guide vane for manual operation
G.VLE0.37 POS., COMPR.I.G.V. 100 %
and indication
minimum position for compressor inlet guide vane for start of fuel
G.VLE0.38 POS., COMPR.I.G.V. 10.5 -1 %
changeover
maximum position for compressor inlet guide vane for start of fuel
G.VLE0.39 POS., COMPR.I.G.V. 71.5 +1 %
changeover
minimum position for compressor inlet guide vane for start of fuel
G.VLE0.40 POS., COMPR.I.G.V. 10.5 -1 %
changeover
Limits and Settings
List of Control Settings
maximum position for compressor inlet guide vane for start of fuel
G.VLE0.41 POS., COMPR.I.G.V. 71.5 +1 %
changeover
release for combustion chamber acceleration limit 4, min. pos. of compr.
G.VLE0.44 POS., COMPR.I.G.V. 95 %
inlet guide vanes, FG operation
inlet guide vanes position for the pilotgas mass flow F.PILOT.86 and primix
G.VLE0.45 POS., COMPR.I.G.V. -20 %
minimum mass flow F.EGVB.28 during load rejection
inlet guide vanes position for the pilotgas mass flow F.PILOT.87 and primix
G.VLE0.46 POS., COMPR.I.G.V. 0%
minimum mass flow F.EGVB.39 during load rejection
inlet guide vanes position for the pilotgas mass flow F.PILOT.88 and primix
G.VLE0.47 POS., COMPR.I.G.V. 20 %
minimum mass flow F.EGVB.30 during load rejection
inlet guide vanes position for the pilotgas mass flow F.PILOT.89 and primix
G.VLE0.48 POS., COMPR.I.G.V. 90 %
minimum mass flow F.EGVB.31 during load rejection
0106E-X
3.1-0210-0592/25
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
G.VLE0.51 POS., COMPR.I.G.V. 5 -1 % minimum inlet guide vane position for start compressor online cleaning
Siemens AG
G.VLE0.52 POS., COMPR.I.G.V. 95 +1 % maximum inlet guide vane position for start compressor online cleaning
G.VLE0.53 POS., COMPR.I.G.V. 33 +1 % maximum position for changeover FO-DO <-> FO-PO
PILOTGAS MASS FLOW FOR NG-PM, REFERENCE POINT FOR
G.VLE0.54 POS., COMPR.I.G.V. 0%
F.PILOT.119
PILOTGAS MASS FLOW FOR NG-PM, REFERENCE POINT FOR
G.VLE0.55 POS., COMPR.I.G.V. 10 %
F.PILOT.120
PILOTGAS MASS FLOW FOR NG-PM, REFERENCE POINT FOR
G.VLE0.56 POS., COMPR.I.G.V. 40 %
F.PILOT.121
PILOTGAS MASS FLOW FOR NG-PM, REFERENCE POINT FOR
G.VLE0.57 POS., COMPR.I.G.V. 60 %
F.PILOT.122
PILOTGAS MASS FLOW FOR NG-PM, REFERENCE POINT FOR
G.VLE0.58 POS., COMPR.I.G.V. 90 %
F.PILOT.123
PILOTGAS MASS FLOW FOR NG-PM, REFERENCE POINT FOR
G.VLE0.59 POS., COMPR.I.G.V. 100 %
F.PILOT.124
MB
IGV POSITION CONTROLLER, FACTOR FAULT LIMIT OPERATING
G.VLE0.60 POS., COMPR.I.G.V. 90 %
POINT MONITORING
CHARACTERISTIC IGV; POSITION LINEAR TRANSDUCER AT
G.VLE0.61 POS., COMPR.I.G.V. -21.52 %
G.VLE0.67
CHARACTERISTIC IGV; POSITION LINEAR TRANSDUCER AT
G.VLE0.62 POS., COMPR.I.G.V. 21.52 %
G.VLE0.68
CHARACTERISTIC IGV; POSITION LINEAR TRANSDUCER AT
G.VLE0.63 POS., COMPR.I.G.V. 42.52 %
G.VLE0.69
Limits and Settings
List of Control Settings
0106E-X
3.1-0210-0592/26
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
Siemens AG
GG.PG.01 ALPHA x A PG 0.34 cm Alpha x A-Value of Pilotburner
GGG.EG.01 VOLUME NG PIPING 1.0 m Volume of NG premix piping between control valve and burner
GGG.HOE.02 VOLUME FO PIPING 0.04 m VOLUME OF FUEL OIL DO-FEEDLINE PINPING
GGG.HOE.04 VOLUME FO PIPING 0.04 m VOLUME OF FUEL OILPO PINPING
GK.ANTEIL.01 RATIO, CONTROLVLVS. 100 %/min RATE OF CHANGE FO-RATIO (FG-RATIO=100% - FO-RATIO)
FAST RATE OF CHANGE ADD OR CHANGEOVER FO-RATIO AT LOAD
GK.ANTEIL.04 RATIO, CONTROLVLVS. 143 %/s
REJECTION OR TRIP
RATE OF CHANGE FO-RATIO (FG-RATIO=100% - FO-RATIO) with
GK.ANTEIL.06 RATIO, CONTROLVLVS. 200 %/min
J.GES.01
RATE OF CHANGE FO-RATIO (FG-RATIO=100% - FO-RATIO) with
GK.ANTEIL.07 RATIO, CONTROLVLVS. 200 %/min
J.GES.02
RATE OF CHANGE FO-RATIO (FG-RATIO=100% - FO-RATIO) with
GK.ANTEIL.08 RATIO, CONTROLVLVS. 150 %/min
J.GES.03
MB
RATE OF CHANGE FO-RATIO (FG-RATIO=100% - FO-RATIO) with
GK.ANTEIL.09 RATIO, CONTROLVLVS. 100 %/min
J.GES.04
RATE OF CHANGE FO-RATIO (FG-RATIO=100% - FO-RATIO) with
GK.ANTEIL.10 RATIO, CONTROLVLVS. 75 %/min
J.GES.05
RATE OF CHANGE FO-RATIO (FG-RATIO=100% - FO-RATIO) with
GK.ANTEIL.11 RATIO, CONTROLVLVS. 75 %/min
J.GES.06
GK.VLE.01 COMPRESSOR I.G.V. 1 %/s COMPR. I.G.V. ADJUSTMENT CONTROL, MANUEL
COMPR. I.G.V. ADJUSTMENT "CLOSED" <=> "MIN", TRIP, generator-
Limits and Settings
0106E-X
3.1-0210-0592/27
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
Siemens AG
Ratio thermal load change / load change: Controller output (YMIN) at full
J.BRENNST.61 THERMAL LOAD 20 %
speed, no load
Ratio thermal load change / load change: Controller output (YMIN) at
J.BRENNST.62 THERMAL LOAD 80 %
E.LEIST.161
J.BRENNST.63 THERMAL LOAD 0% THERMAL LOAD AT J.HOEANT.11
J.BRENNST.64 THERMAL LOAD 20 % THERMAL LOAD AT J.HOEANT.12
J.BRENNST.65 THERMAL LOAD 30 % THERMAL LOAD AT J.HOEANT.13
J.BRENNST.66 THERMAL LOAD 40 % THERMAL LOAD AT J.HOEANT.14
J.BRENNST.67 THERMAL LOAD 50 % THERMAL LOAD AT J.HOEANT.15
J.BRENNST.68 THERMAL LOAD 60 % THERMAL LOAD AT J.HOEANT.16
J.BRENNST.69 THERMAL LOAD 70 % THERMAL LOAD AT J.HOEANT.17
J.BRENNST.70 THERMAL LOAD 80 % THERMAL LOAD AT J.HOEANT.18
MB
J.BRENNST.71 THERMAL LOAD 90 % THERMAL LOAD AT J.HOEANT.19
J.BRENNST.72 THERMAL LOAD 100 % THERMAL LOAD AT J.HOEANT.20
emulsion FO: upper limit thermal load setpoint to release emulsion
J.BRENNST.73 THERMAL LOAD 80 %
operation
J.EG.02 CONVERSION FACTOR 0.156 (kg/s) / % CONVERSION FACTOR THERMAL POWER TO FUEL MASS FLOW
J.EG.04 THERMAL LOAD 1% limiting function, startup with NG, 1.point of characteristic
J.EG.05 THERMAL LOAD 1% limiting function, startup with NG, 2.point of characteristic
Limits and Settings
List of Control Settings
J.EG.06 THERMAL LOAD 13 % limiting function, startup with NG, 3.point of characteristic
J.EG.07 THERMAL LOAD 23 % limiting function, startup with NG, 4.point of characteristic
J.EG.08 THERMAL LOAD 28 % limiting function, startup with NG, 5.point of characteristic
J.EG.09 THERMAL LOAD 30 % limiting function, startup with NG, 6.point of characteristic
J.EGANT.01 VOLUME FG THERMAL LOAD 26 % NG-PREMIX-PROPORTION AT TT.ATK.60
VOLUME FGPM THERMAL
J.EGANT.02 42 % NG-PREMIX-PROPORTION AT TT.ATK.61
LOAD
VOLUME FGPM THERMAL
J.EGANT.03 60 % NG-PREMIX-PROPORTION AT TT.ATK.62
LOAD
0106E-X
3.1-0210-0592/28
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
LOAD
Power Generation
Technical Data
Siemens AG
J.EGVB.01 CORRECTION FACTOR 1.42 --- Correction factor of combustion efficieny
J.EGVB.02 CORRECTION FACTOR 1.42 --- Correction factor of combustion efficieny
J.EGVB.03 CORRECTION FACTOR 1.3 --- Correction factor of combustion efficieny
J.EGVB.04 CORRECTION FACTOR 1.15 --- Correction factor of combustion efficieny
J.EGVB.05 CORRECTION FACTOR 1.0 --- Correction factor of combustion efficieny
J.EGVB.06 CORRECTION FACTOR 1.0 --- Correction factor of combustion efficieny
RATE OF CHANGE FO-RATIO GK.ANTEIL.01 (FG-RATIO=100% - FO-
J.GES.01 THERMAL LOAD 0%
RATIO) with J.GES.01
RATE OF CHANGE FO-RATIO GK.ANTEIL.02 (FG-RATIO=100% - FO-
J.GES.02 THERMAL LOAD 30 %
RATIO) with J.GES.02
RATE OF CHANGE FO-RATIO GK.ANTEIL.03 (FG-RATIO=100% - FO-
J.GES.03 THERMAL LOAD 45 %
RATIO) with J.GES.03
MB
RATE OF CHANGE FO-RATIO GK.ANTEIL.04 (FG-RATIO=100% - FO-
J.GES.04 THERMAL LOAD 60 %
RATIO) with J.GES.04
RATE OF CHANGE FO-RATIO GK.ANTEIL.05 (FG-RATIO=100% - FO-
J.GES.05 THERMAL LOAD 75 %
RATIO) with J.GES.05
RATE OF CHANGE FO-RATIO GK.ANTEIL.06 (FG-RATIO=100% - FO-
J.GES.06 THERMAL LOAD 100 %
RATIO) with J.GES.06
J.HOE.01 CONVERSION FACTOR 5.5 % / (kg/s) CONVERSION FACTOR FUEL MASS FLOW TO THERMAL POWER
J.HOE.02 CONVERSION FACTOR 1.9 (kg/s) / % CONVERSION FACTOR THERMAL POWER TO FUEL MASS FLOW
Limits and Settings
List of Control Settings
J.HOE.04 THERMAL LOAD 1% limiting function, startup with FO, 1.point of characteristic
J.HOE.05 THERMAL LOAD 1% limiting function, startup with FO, 2.point of characteristic
J.HOE.06 THERMAL LOAD 1% limiting function, startup with FO, 3.point of characteristic
J.HOE.07 THERMAL LOAD 12 % limiting function, startup with FO, 4.point of characteristic
J.HOE.08 THERMAL LOAD 17 % limiting function, startup with FO, 5.point of characteristic
J.HOE.09 THERMAL LOAD 20 % limiting function, startup with FO, 6.point of characteristic
VOLUME FOPM THERMAL
J.HOEANT.01 50 % PROPORTION FO-PREMIX OF THERMAL LOAD AT J.BRENNST.20
LOAD
VOLUME FOPM THERMAL
J.HOEANT.02 50 % PROPORTION FO-PREMIX OF THERMAL LOAD AT J.BRENNST.21
LOAD
0106E-X
3.1-0210-0592/29
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
LOAD
Power Generation
Technical Data
Siemens AG
VOLUME FOPM THERMAL
J.HOEANT.06 60 % PROPORTION FO-PREMIX OF THERMAL LOAD AT J.BRENNST.25
LOAD
VOLUME FOPM THERMAL
J.HOEANT.07 65 % PROPORTION FO-PREMIX OF THERMAL LOAD AT J.BRENNST.26
LOAD
VOLUME FOPM THERMAL
J.HOEANT.08 70 % PROPORTION FO-PREMIX OF THERMAL LOAD AT J.BRENNST.27
LOAD
VOLUME FOPM THERMAL
J.HOEANT.09 75 % PROPORTION FO-PREMIX OF THERMAL LOAD AT J.BRENNST.28
LOAD
VOLUME FOPM THERMAL
J.HOEANT.10 80 % PROPORTION FO-PREMIX OF THERMAL LOAD AT J.BRENNST.29
LOAD
VOLUME FOPM THERMAL
J.HOEANT.11 50 % PROPORTION FO-PREMIX OF THERMAL LOAD AT J.BRENNST.63
LOAD
VOLUME FOPM THERMAL
J.HOEANT.12 50 % PROPORTION FO-PREMIX OF THERMAL LOAD AT J.BRENNST.64
LOAD
MB
VOLUME FOPM THERMAL
J.HOEANT.13 50 % PROPORTION FO-PREMIX OF THERMAL LOAD AT J.BRENNST.65
LOAD
VOLUME FOPM THERMAL
J.HOEANT.14 50 % PROPORTION FO-PREMIX OF THERMAL LOAD AT J.BRENNST.66
LOAD
VOLUME FOPM THERMAL
J.HOEANT.15 50 % PROPORTION FO-PREMIX OF THERMAL LOAD AT J.BRENNST.67
LOAD
VOLUME FOPM THERMAL
J.HOEANT.16 60 % PROPORTION FO-PREMIX OF THERMAL LOAD AT J.BRENNST.68
LOAD
Limits and Settings
List of Control Settings
0106E-X
3.1-0210-0592/30
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
Siemens AG
JK.EGDB.01 THERM. LOAD GRADIENT 2.6 %/min 1. GRADIENT THERMAL LOAD AT START UP WITH NG (NG-DM-CV)
JK.EGDB.02 THERM. LOAD GRADIENT 4.5 %/min 2. GRADIENT THERMAL LOAD AT START UP WITH NG (NG-DM-CV)
1. GRAD. THERMAL LOAD AT START UP WITH NG (NG-DM-CV),
JK.EGDB.03 THERM. LOAD GRADIENT 2.6 %/min
BLACK START
2. GRAD. THERMAL LOAD AT START UP WITH NG (NG-DM-CV),
JK.EGDB.04 THERM. LOAD GRADIENT 4.5 %/min
BLACK START
JK.EGDB.05 THERM. LOAD GRADIENT 6.3 %/min 3. GRADIENT THERMAL LOAD AT START UP WITH NG (NG-DM-CV)
3. GRAD. THERMAL LOAD AT START UP WITH NG (NG-DM-CV),
JK.EGDB.06 THERM. LOAD GRADIENT 6.3 %/min
BLACK START
JK.HOEDB.01 THERM. LOAD GRADIENT 1.54 %/min 1. GRADIENT THERMAL LOAD AT START UP WITH FO (FO-DM-CV)
JK.HOEDB.02 THERM. LOAD GRADIENT 3.56 %/min 2. GRADIENT THERMAL LOAD AT START UP WITH FO (FO-DM-CV)
1. GRADIENT THERMAL LOAD AT START UP WITH FO (FO-DM-CV),
JK.HOEDB.03 THERM. LOAD GRADIENT 1.54 %/min
BLACK START
MB
2. GRAD. THERMAL LOAD AT START UP WITH FO (FO-DM-CV), BLACK
JK.HOEDB.04 THERM. LOAD GRADIENT 3.56 %/min
START
JK.HOEDB.05 THERM. LOAD GRADIENT 3.56 %/min 3. GRADIENT THERMAL LOAD AT START UP WITH FO (FO-DM-CV)
3. GRADIENT THERMAL LOAD AT START UP WITH FO (FO-DM-CV),
JK.HOEDB.06 THERM. LOAD GRADIENT 3.56 %/min
BLACK START
MAX: PERMISSIBLE THERMAL LOAD GRADIENT UNTIL HCO DOES
JK.HSO.01 THERM. LOAD GRADIENT 0.06 %/s
NOT NEED TO BE DEACTIVATED
Limits and Settings
K.ABBL.02 WAITING TIME 60 s DELAY TIME FOR CLOSING BLOW OFF FLAPS DURING START
List of Control Settings
0106E-X
3.1-0210-0592/31
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
K.ACC.13 CC-Acceleration 15 s combustion chamber acceleration akkumulation time for limit GW3
Siemens AG
K.ANTEIL.01 CHANGEOVER TIME 0.5 s CHANGEOVER TIME NGDM -> NGPM
K.ANTEIL.02 CHANGEOVER TIME 10 s CHANGEOVER TIME NGPM -> NGDM
K.ANTEIL.04 CHANGEOVER TIME 2s CHANGEOVER TIME NGPM -> NGDM LOAD REJECTION
K.ANTEIL.07 MONITORING TIME 200 ms monitoring control deviation, delay time
K.ANTEIL.09 CHANGEOVER TIME 7s CHANGEOVER TIME DM -> PM (FUEL OIL)
K.ANTEIL.10 CHANGEOVER TIME 7s CHANGEOVER TIME PM -> DM (FUEL OIL)
K.ANTEIL.11 CHANGEOVER TIME 7s CHANGEOVER TIME PM -> DM (FUEL OIL) FAST CHANGEOVER
K.ANTEIL.12 CHANGEOVER TIME 700 ms CHANGEOVER TIME PM -> DM (FUEL OIL) LOAD REJECTION
K.ANTEIL.13 CHANGEOVER TIME 200 ms DELAY TIME FOR START OF CHANGEOVER PM -> DM (FUEL OIL)
K.ANTEIL.15 MONITORING TIME 200 ms MONITORING TIME CONTROL DEVIATION OF FO-CV > MAX 1
K.ANTEIL.17 WAITING TIME 5s DELAY TIME FILLING FO-PREMIX-HEADER BEFORE CHANGEOVER
K.ANTEIL.18 MONITORING TIME 200 ms MONITORING TIME CONTROL DEVIATION OF FO-CV >MAX 2
MB
AKTIVATION TIME NPRLIM, temperature- and loadsetpoint stop during
K.ANTEIL.20 AKTIVATION TIME 5s
FG-changeover
K.ANTEIL.21 AKTIVATION TIME 10 s Waiting time at NG-adding mass flow
K.ANTEIL.22 AKTIVATION TIME 10 s Waiting time at NG-shut off mass flow
K.ANTEIL.23 AKTIVATION TIME 10 s Waiting time at FO-adding mass flow
K.ANTEIL.24 AKTIVATION TIME 10 s Waiting time at FO shut-off mass flow
Limits and Settings
K.BLASKH.01 TIME, BALL VALVE 15 s running time accumulater drainage ball valve
List of Control Settings
0106E-X
3.1-0210-0592/32
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
Siemens AG
combustion chamber humming/acceleration, delay for humming time
K.BRUMM.11 CC-HUMMING 1s
registration in DO and PO, V94.2: delay for unload
combustion chamber humming/acceleration, delay for humming time
K.BRUMM.12 CC-HUMMING 2s
registration in DO/PO-MO and during DO-PO-changeovers
combustion chamber humming/acceleration, limit for accumulated humming
K.BRUMM.13 CC-HUMMING 30 s
time
K.BRUMM.14 CC-HUMMING 1s COMBUSTION-CHAMBER, GT-Trip for P.BRUMM.06
delay time for interlocking humming/acceleration monitoring after FO
K.BRUMM.19 CC-HUMMING 65 s
shutoff at fuel changeover
delay time for interlocking humming/acceleration monitoring after NG
K.BRUMM.20 CC-HUMMING 10 s
shutoff at fuel changeover
K.BRUMM.22 CC-HUMMING 10 s combustion chamber humming limit 2, delay time at HP-Emulsion on/off
combustion chamber humming/acceleration, 2nd limit for accumulated
K.BRUMM.23 CC-HUMMING 10 s
MB
humming time
K.EGDB.03 TIME NG FILLING HEADER 2s BALANCING DELAY DURING FILLING FG-DIFF.-HEADER
MAX DELAY TIME FILLING FG-PREMIX-HEADER AT CHANGEOVER
K.EGDB.07 TIME NG FILLING HEADER 4s
FG-PREMIX. TO FG-MIX
Delay time filling FG-Diffusion Piping at changeover FG-PREMIX. to FG-
K.EGDB.08 TIME NG FILLING HEADER 12 s
MIX or FG-DIFF during load rejection
K.EGSSV.01 TIME NG-ESV 3s SIGNAL EXTENSION FOR CLOSE-SIGNALS
PULSE LENGTH FOR INTERLOCK OF SUBS. RE-OPEN. AFTER CLOSE
Limits and Settings
COMMAND
K.EGVB.02 TIME NG FILLING HEADER 2s BALANCING DELAY DURING FILLING FG-PREMIX-HEADER
K.EGVB.04 TIME NG FILLING HEADER 2.8 s Delay time filling NG premix header at fuel changeover at P.VII.12
K.EGVB.05 TIME NG FILLING HEADER 3.8 s Delay time filling NG premix header at fuel changeover at P.VII.13
K.EGVB.06 TIME NG FILLING HEADER 4.5 s Delay time filling NG premix header at fuel changeover at P.VII.14
K.EGVB.07 TIME NG FILLING HEADER 5.4 s Delay time filling NG premix header at fuel changeover at P.VII.20
K.EGVB.08 TIME NG FILLING HEADER 6.3 s Delay time filling NG premix header at fuel changeover at P.VII.21
K.EGVB.09 TIME NG FILLING HEADER 6.5 s Delay time filling NG premix header at fuel changeover at P.VII.22
MAX DELAY TIME FILLING FG-PREMIX-HEADER AT CHANGEOVER
K.EGVB.10 TIME NG FILLING HEADER 4s
FG-DIFF. TO PREMIX
0106E-X
3.1-0210-0592/33
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
K.ENTOEL.01 TIME SOLENOID VALVE 5 min MONITORING TIME FOR FO-DRAINAGE AFTER FAULTY START
Technical Data
Fuel change over monitoring: GT-trip, when NG-ESV and FO-ESV are both
K.FCO.01 TIME Fuel Change Over 140 s
Siemens AG
longer opend
K.FLAMM.01 TIME FLAME MONIT. 13 s DELAY FOR ALARM
K.HOE.01 TIME FO-SOV RET.LINE 1s DELAY OF CLOSE COMMAND TO FO-RETURN LINE SHUTOFF VALVE
INTERLOCK TO PREVENT SUBSEQUENT RE-OPEN. AFTER CLOSING
K.HOE.02 TIME FO-ESV 15 s
OF FO-ESV
K.HOE.03 TIME FO-ESV 3s SIGNAL EXTENSION FOR CLOSE-SIGNALS
K.HOE.14 TIME FO 5 min block of fuel oil pump swich over after start of operation
K.HOEDB.01 time, FO-diff.header-filling 3s DELAY TIME FILLING FO-DIFF.-HEADER AT fuel changeover
K.HOEDB.03 TIME FO DB 7s BALANCING DELAY DURING FILLING FO-PREMIX-HEADER
K.HOEDB.04 TIME FO DB 0.1 s BALANCING DELAY DURING EXHAUSTING FG-PREMIX-HEADER
K.HOEDB.05 TIME FO DB 0.5 s DELAY TIME FLUSHING FO-DIFF.-HEADER AT FUEL-CHANGEOVER
K.HOEDB.06 TIME FO DB 5s TIME FOR FUEL INJEKTION DURING FLUSH OPERATION
MB
K.HOEDB.07 TIME FO DB 0.3 s BALANCING DELAY DURING START FLUSHING FO-DIFF.-HEADER
K.HOEDB.08 TIME FO DB 5s BALANCING DELAY DURING END OF FLUSHING FO-DIFF.-HEADER
K.HOEDB.09 TIME FO DB 0.5 s BALANCING DELAY DURING TURN OFF FLUSHING FO-DIFF.-HEADER
waiting time H-DBRL-SV in waiting time from opening FO-DMFL-ESV to beginn of opening FO-DMRL-
K.HOEDB.10 0.3 s
MO CV at fuel change over
K.HOEDB.11 proceding time H-DB-SV 10 s Proceding time H-DB-SV to operation point (fuel changeover)
K.HOEDB.12 TIME FO 1.0 s Opneing TIME FO-DMFL-CV OPEN at fuel changeover NG-PM -> FO
Limits and Settings
List of Control Settings
SOFT-START TIME H-DBVL- RUN TIME H-DBVL-SV OPEN TO AVOID CAVITATION AT FO-
K.HOEDB.13 5s
SV INJECTION PUMP
Fuel change over monitoring: GT trip when FO-DM-ESV and FG-ESV are
K.HOEDB.14 TIME Fuel Change Over 150 s
longer simultaneously opened
K.HOEDB.15 TIME FO-DM 5s Opening time monitoring for FO-DM-seal air valve
seal air monitoring: maximum time without flushing water when opening
K.HOEDB.16 TIME FO-DM 2s
FO-DM-ESV
seal air monitoring: minimum time since fo-dm-seal air valve left closed
K.HOEDB.17 TIME FO-DM 1s
position, when flushing water stops
K.HOEKH.03 TIME FO 15 s MONITORING TIME NAPHTHA/FUEL OIL-BALL VALVE
K.HOERL.01 TIME FO 180 s Delay time for Warning after opening Recirculation ball valve
0106E-X
3.1-0210-0592/34
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
TO PREMIX
Power Generation
Technical Data
Siemens AG
K.HOEVB.05 TIME FO PB 7s BALANCING DELAY DURING FILLING FO-PREMIX-HEADER
DELAY TIME FILLING FO-DIFF.-HEADER AT CHANGEOVER PREMIX
K.HOEVB.06 TIME FO PB 0s
TO DIFF.
TIME FOR FUEL INJEKTION DURING FLUSH OPERATION PREMIX
K.HOEVB.07 TIME FO PB 5s
HEADER
K.HOEVB.08 TIME FO PB 0.3 s BALANCING DELAY DURING START FLUSHING FO-PREMIX-HEADER
K.HOEVB.09 TIME FO PB 5s BALANCING DELAY DURING END OF FLUSHING FO-PREMIX-HEADER
BALANCING DELAY DURING TURN OFF FLUSHING FO-PREMIX-
K.HOEVB.10 TIME FO PB 0.5 s
HEADER
TIME FO-prem-flushing at Fast-
K.HOEVB.11 3s ACT TIME FO-PREMIX-OP MASSFLOW DUR FLUSH F C/O
CO
BLEEDING- AND FLUSHING
K.HSO.01 30 s BLEEDING- AND FLUSHING TIME BEFORE GT-START-UP
TIME
MB
K.HSO.03 FILLING TIME ACCUMULATOR 30 s MAXIMUM TIME FOR FILLING THE ACCUMULATOR
MIN. OPERATING TIME OF THE GT AFTER WHICH THE HCO MAY BE
K.HSO.04 OPERATION TIME GT 1h
ACTIVATED AT THE EARLIEST
MAX. MOVING TIME OF THE ROTOR DURING GT-OPERATION FOR
K.HSO.05 MOVING TIME ROTOR 18 s
ACTIVATING THE HCO
K.HSO.06 PERIOD FLUSHING 12 h PERIOD AFTER WHICH THE ACTIVATED TRACK HAS TO BE FLUSHED
K.HSO.07 FILLING TIME ACCUMULATOR 18 s MINIMUM TIME FOR FILLING THE ACCUMULATOR
K.HSO.08 TIME FLUSHING MAIN TRACK 20 s MINIMUM TIME FOR FLUSHING THE MAIN TRACK
Limits and Settings
List of Control Settings
0106E-X
3.1-0210-0592/35
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
REJECTION
Power Generation
Technical Data
TIME DELAY, LOAD Time delay for the release to changeover from FG-VB to FG-DBVB-MIX-
K.LAW.05 40 s
REJECTION Operation or FG-DB after load rejection and interlocks
Siemens AG
K.LECKOEL.01 TIME OIL LEAKAGE V 5s LEAK OIL PRESSURE MONITORING: SUPPRESSION TIME
K.LECKOEL.02 TIME OIL LEAKAGE V 3s DELAY TIME OF POSITION MONITORING OF LEAK OIL VALVE
K.LEER.01 TIME PM-DRAIN VALVES 30 s TIME OPENING PREMIX DRAIN VALVES
time opening of premix drain valves at load rejection from fuel oil premix
K.LEER.07 TIME PM-DRAIN VALVES 4.5 s
operation
K.LEER.08 TIME PM-DRAIN VALVES 100 s time to opening the premix drain valves after first premix burner drain
waiting time for "open the premix drain valves" befor the last purge
K.LEER.09 TIME PM-DRAIN VALVES 20 s
sequence.
K.LEER.10 TIME PM-DRAIN VALVES 105 s time to opening the premix drain valves after the last premix burner purge
time duration from opening FO-DM-seal air ball valve to lowering pilotgas at
K.PILOT.03 TIME PILOTVALVE 70 s
fuel changeover
K.PILOT.09 TIME PILOTVALVE 20 s delay time after S.TURB.102 for the pilotgasflow during the start up
MB
K.PILOT.10 TIME PILOTVALVE 30 s time pilot gas raising when aborting fuel change over
K.PILOT.11 TIME PILOTVALVE 1.5 s monitoring control deviation, delay time
K.PILOT.12 TIME PILOTVALVE 5s waiting time for offset during fuel change over FG-PM -> FO
K.PILOT.13 TIME PILOTVALVE 10 s delay time for offset after the fuel change over FG-PM -> FO
K.PILOT.14 TIME PILOTVALVE 1s waiting time for offset during fuel change over FO -> FG-PM
Start for the offset from the pilotgasmassflow during fuel change over
K.PILOT.15 TIME PILOTVALVE 3s
before finish flushing
Limits and Settings
List of Control Settings
K.PILOT.16 TIME PILOTVALVE 10 s delay time for offset after the fuel change over FO -> FG-PM
K.PRAL.01 time constant 1s TV PRAL-CONTROLLER
K.PRAL.02 delay time 0.4 s TN PRAL-CONTROLLER
K.PRAL.04 delay time 2s TN Cooling air limit controller
INTEGRATION TIME FLOATING DEADBAND PRIMARY FREQUENCY
K.PSF.01 TIME 5s
DEADBAND
K.PSF.02 TIME 30 min min. operation time of GT for frequency influence
max. time with open generator-breaker without losing the relaese of
K.PSF.03 TIME 5 min
frequency influence
K.PUMP.01 TIME 30 s ACTIVATING DELAY FOR TRANSMITTER MONITORING
0106E-X
3.1-0210-0592/36
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
K.REZIKH.02 TIME RECIRCULATION-BV 30 s Opening time for the recirculation ball valve after opening
Siemens AG
K.REZIKH.03 TIME RECIRCULATION-BV 30 s Opening time for the recirculation ball valve after opening FODBRL-SV
K.SCHMOEL.01 TIME LUBE-OIL 2s DELAY FOR ALARM
K.SCHMOEL.02 TIME LUBE-OIL 30 s DELAY FOR ALARM
K.SCHMOEL.03 TIME LUBE-OIL 5s DELAY FOR ALARM
K.SCHMOEL.04 TIME LUBE-OIL 10 s DELAY FOR ALARM
K.SCHMOEL.05 TIME LUBE-OIL 3s DELAY FOR ALARM
MONIT.-TIME FOR TURNING-OPERATION FOR RISING OF lube- and
K.SCHMOEL.06 TIME LUBE-OIL 10 s
LIFT-OIL PRESSURE
K.SCHMOEL.07 TIME LUBE-OIL 5s DELAY FOR ALARM, LIFTOILPUMP ON AND P < MIN
K.SCHMOEL.08 TIME LUBE-OIL 10 min Delay for < S.TURB.02 for switch off oil pumps
K.SCHMOEL.09 TIME LUBE-OIL 300 s delay for pressure monitoring of oil vapor fans
K.SPUDB.01 TIME BURNER 20 s TIME FOR FLUSHING OF DM-BURNERS AT TRIP
MB
DELAY TIME FOR START FLUSHING DM-BURNER AT LOAD REJ.
K.SPUDB.02 TIME BURNER 1s
FROM FO-MODE
filling time FO-DM-header at compressor outlet pressure less than / equal
K.SPUDB.04 TIME FO PURGING 8.0 s
P.VII.18
filling time FO-DM-header at compressor outlet pressure equal / greater
K.SPUDB.05 TIME FO PURGING 15 s
than P.VII.19
K.SPUDB.06 TIME FO PURGING 0.5 s leadtime opening FO-DM-flushing-Valves before closing FO-DMFL-ESV
K.SPUDB.08 TIME FO PURGING 3.0 s leadtime opening FO-DM-seal air valve before finish flushing
Limits and Settings
List of Control Settings
K.SPUDB.09 TIME FO PURGING 1.8 s time closing FO-DM-flushing valves after opening FO-DM-ESV
K.SPUEKH.01 ball valve running time 16 s running time discharge ball valve of fuel oil injection pump
TIME FOR COOLING OF PM-BURNERS AT CHANGEOVER FROM DM
K.SPUVB.01 TIME BURNER 25 s
TO PM
TIME FOR FLUSHING OF PM-BURNERS AT CHANGEOVER FROM PM
K.SPUVB.02 TIME BURNER 69 s
TO DM
DELAY TIME FOR START FLUSHING PM-BURNERS AT LOAD REJ.
K.SPUVB.03 TIME BURNER 8s
FROM MIX.OP.
K.SPUVB.04 TIME BURNER 35 s DELAY TIME FOR OPENING PM-HEADER DRAIN
K.SPUVB.05 TIME BURNER 5s OPENING TIME PM-HEADER DRAIN VALVES; GT IN DIFF-OPERATION
0106E-X
3.1-0210-0592/37
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
K.SPUVB.08 Waiting time FO PM purging 240 s waiting time "premix purge" after trip from fuel oil premix
Technical Data
Siemens AG
OPENING TIME OF PO-RINGLINE DRAINAGE DURING PO-PURGING
K.SPUVBE.02 TIME FO-PO-DRAINAGE 249 s
AFTER LOAD REJACTION
First opening time for FO-PO manifold drain solenoid valve for PO purge.
K.SPUVBE.03 TIME FO-PO-DRAINAGE 10 s
Total time for first drain valve open/close sequence
K.STATIK.01 SPEED DROOP 5s delay time for Static of speed governor SE.STATIK.05
DELAY TIME for increased HOT/COLD-SPOT limits at burner changeover
K.TAT.01 TIME-TAT MEANVALUE 20 s
and fuel oil flushing
K.TAT.02 TIME-TAT MEANVALUE 20 s DELAY TIME for increased HOT/COLD-SPOT limits at fuel changeover
DELAY TIME for increased HOT/COLD-SPOT limits at diffusion-emulsion
K.TAT.03 TIME-TAT MEANVALUE 20 s
on/off or premix-emulsion on/off
K.TAT.05 TIME-TAT MEANVALUE 20 s DELAY TIME LOAD REJEKTION
K.TAT.06 TIME COLD-SPOT 10 s Delay time for Cold Spot protection during fuel changeover
K.TLE.01 DELAY TIME 50 s OPERATING TIME COOLING AIR FLAP
MB
K.TLE2.01 DELAY TIME 10 s DELAY TIME COOLING AIR FLAP OPEN
K.TLE2.02 DELAY TIME 30 s DELAY TIME SHUT DOWN PROGRAM
K.TLE2.03 DELAY TIME 5 min DELAY TIME CONTROL DEVIATION PP.TLE2.03
K.TLE3.01 DELAY TIME 10 s DELAY TIME COOLING AIR FLAP OPEN
K.TLE3.02 DELAY TIME 30 s DELAY TIME SHUT DOWN PROGRAM
K.TLE3.03 DELAY TIME 5 min DELAY TIME CONTROL DEVIATION PP.TLE3.03
Limits and Settings
List of Control Settings
K.TURN.01 TIME TURNING-OP. 22 h TIME FOR TURNING-OPERATION AFTER CLOSING OF VLE SHUT-OFF
K.TURN.02 TIME TURNING-OP. 6h TIME BETWEEN TWO INTERVAL-TURNING-OPERATION-EVENTS
K.TURN.03 TIME TURNING-OP. 24 h MONIT.-TIME FOR TURNING-OPERATION
K.TURN.04 TIME TURNING-OP. 2h TIME FOR TURNING-OPERATION UP TO CLOSING OF VLE SHUT-OFF
K.TURN.05 TIME TURNING-OP. 60 s Monitoring time until n < S.TURB.20
K.TURN.06 TIME TURNING-OP. 150 s DELAY FOR ALARM, TURN-VLV OPEN AND N < S.TURB.02
K.TURN.10 Time flow control valve 60 s lift time flow control valve
FILLINGTIME FOR PM-FEED LINE AFTER DRAINAGE (GT-TRIP IN FO-
K.VBFUELL.01 TIME FILLING PO-FEED LINE 40 s
PO)
K.VLE.02 TIME COMPR. I.G.V. 10 s INTEGRAL-ACTION PI-CONTROLLER FOR COMPR. I.G.V.
0106E-X
3.1-0210-0592/38
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
K.VLE.09 TIME COMPR. I.G.V. 9s run time fast IGV
Technical Data
Siemens AG
K.VLE.11 TIME COMPR. I.G.V. 5s Blocking of IGV at initiation of acceleration monitoring
K.WASCH.02 Time compressor cleaning 25 s monitoring time Online compressor cleaning
HP-EMULSIONS-WATER-ESV: MON. TIME FOR FEEDBACK AFTER
K.WASS.09 TIME HP Emulsion WATER 2s
CLOSE COMMAND
HP-EMULSIONS-WATER-CV: MON. TIME FOR FEEDBACK AFTER
K.WASS.10 TIME HP Emulsion WATER 5s
CLOSE COMMAND
HP-EMULSIONS-DM-WATER-CV: MON. TIME FOR FEEDBACK AFTER
K.WASS.11 TIME HP Emulsion WATER 36 s
CONTROLLER CLOSE COMMAND
HP-EMULSIONS-PM-WATER-CV: MON. TIME FOR FEEDBACK AFTER
K.WASS.12 TIME HP Emulsion WATER 36 s
CONTROLLER CLOSE COMMAND
K.WC.03 Time Wet Compression 0.0 s time delay for TOTC setpoint decrease for switch off Wet C
time duration for TOTC gradient for TOTC setpoint decrease for switch off
K.WC.04 Time Wet Compression 60.0 s
Wet C
MB
K.WC.05 Time Wet Compression 1.0 s time duration for maximum TOTC setpoint decrease for switch off Wet C
Factor for PT1 time FO-PO piping, calculation dynmic mass flow proportion
KK.HOE.02 Factor PT1 time FO-PO piping 20 %
water/FO-PO
Factor PT1 time FO-DO feed Factor for PT1 time FO-DO feed piping, calculation dynmic mass flow
KK.HOE.03 20 %
piping proportion water/FO-DO
Factor lag time FO-DO feed Factor for lag time FO-DO feed piping, calculation dynmic mass flow
KK.HOE.05 80 %
piping proportion water/FO-DO
Factor for lag time FO-PO piping, calculation dynmic mass flow proportion
Limits and Settings
L.SAMMLER.01 Level NG-drain-system 10 + 4 % Header level natural gas drainage system too low
L.SAMMLER.02 Level NG-drain-system 30 +4 % Header level natural gas drainage system low, header drainge stop
L.SAMMLER.03 Level NG-drain-system 75 -4 % Header level natural gas drainage system higth, piping drainage stop
L.SAMMLER.04 Level NG-drain-system 95 -4 % Header level natural gas drainage system too high
L.SPUEL.01 LEVEL FLUSHING W. 800 +10 mm FLUSHING WATER LEVEL LOW, FILLING TANK
L.SPUEL.02 LEVEL FLUSHING W. 200 +10 mm FLUSHING WATER LEVEL TOO LOW, PROTECTION OF PUMPS
L.SPUEL.03 LEVEL FLUSHING W. 890 -10 mm FLUSHING WATER LEVEL HIGH, STOP FILLING OF TANK
L.SPUEL.04 LEVEL FLUSHING W. 970 -10 mm FLUSHING WATER LEVEL TOO HIGH, OVERFLOW PROTECTION
L.SPUEL.05 LEVEL FLUSHING W. 850 +10 mm FLUSHING WATER LEVEL AFTER PM-BURNER COOLING
0106E-X
3.1-0210-0592/39
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
P.GAS.06 NAT. GAS PRESSURE 25.4 +0.4 bar NG PRESSURE for premix LOW
Technical Data
P.GAS.07 NAT. GAS PRESSURE 23.0 +0.8 bar NG PRESSURE TOO LOW: NG TRIP IN PREMIX- AND MIXED-OP.
Siemens AG
P.GAS.08 NAT. GAS PRESSURE 27.0 bar REFERENCE-PRESSURE FOR HYBRID-BURNER-PROTECTION
P.GAS.11 NAT. GAS PRESSURE 29.0 -0.2 bar NAT.GAS-PRESS. TOO HIGH, ALARM
NAT.GAS-PRESS. UPSTREAM ESV TOO LOW: NG-TRIP IN PREMIX
P.GAS.17 NAT. GAS PRESSURE 23.5 +0.8 bar
AND MIX-OP.
NATURAL GAS MINIMUM PRESSURE FOR CORRECTION
P.GAS.27 NATURAL GAS PRESSURE 8 bar
CALCULATOR
MIN. FO-PRESSURE FOR OPENING FO-ESV (NON REDUDANT FO-
P.HOE.01 FUEL OIL PRESSURE 65 - 5 bar
SYSTEM)
P.HOE.09 FUEL OIL PRESSURE 1.0+0.5 bar max. pressure upstream ESV for manual opening of ESV
P.HOE.16 FUEL OIL PRESSURE 1.0 -0.2 bar release switch on fuel oil injection pump
P.HOE.17 FUEL OIL PRESSURE 0.1 +1.0 bar FO-trip and shutoff fuel oil injection pump
P.HOE.18 FUEL OIL PRESSURE 60.0 +5.0 bar beginning of change over in two pump system
MB
P.HOEDB.05 FUEL OIL PRESSURE 0 --- pressure related correction
P.HOEDB.06 FUEL OIL PRESSURE 0.3 --- pressure related correction
P.HOEDB.07 FUEL OIL PRESSURE 0.4 --- pressure related correction
P.HOEDB.08 FUEL OIL PRESSURE 0.5 --- pressure related correction
P.HOEDB.09 FUEL OIL PRESSURE 1 --- pressure related correction
P.HOEDB.10 FUEL OIL PRESSURE 1.5 --- pressure related correction
P.HOEDB.11 FUEL OIL PRESSURE 8 barabs maximal Backpressure (reference)
Limits and Settings
List of Control Settings
P.HSO.02 PRESSURE HCO-SYSTEM 7.0 -0.5 bar LIMIT VALUE FOR PRESSURE-RELIEVED HCO-SYSTEM
P.HSO.03 PRESSURE HCO-SYSTEM 175 -2 bar SYSTEM PRESSURE WITH WHICH THE HCO-PUMP IS SWITCHED OFF
LOWER SYSTEMPRESSURE; THE HCO-PUMP IS SWITCHED ON WITH
P.HSO.04 PRESSURE HCO-SYSTEM 160 +5 bar
FALLING BELOW
P.HSO.05 PRESSURE HCO-SYSTEM 175 -2 bar MIN. PRESSURE FOR FLUSHING
HCO REVERSE LINE
P.HSO.06 5 bar PRESSURE IN THE NOT-ACTIVATED TRACK IS OKAY
PRESSURE
HCO REVERSE LINE
P.HSO.07 10 bar MAX. PRESSURE IN THE NOT-ACTIVATED TRACK
PRESSURE
HCO REVERSE LINE
P.HSO.08 150 bar PRESSURE IN THE ACTIVATED TRACK IS OKAY
PRESSURE
0106E-X
3.1-0210-0592/40
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
Siemens AG
P.HYD.02 HYDRAULIC PRESSURE 150 -5 bar STOP STAND-BY OIL PUMP
P.HYD.04 HYDRAULIC PRESSURE 125 +5 bar TRIP ACTIVATING
P.HYD.05 HYDRAULIC PRESSURE 170 -5 bar HYDRAULIC PRSSURE TOO HIGH
COMPRESSOR PRESSURE RATIO AT BASE LOAD AND ISO-
P.PIGL.01 COMPR.PRESSURE RATIO 17.8 ---
CONDITIONS
COMPRESSOR LIMIT CHARACTERISTICS: MAX. COMPR. PRESSURE
P.PISTERN.11 COMPRESSOR CHARACT. 48.86 %
RATIO
COMPRESSOR LIMIT CHARACTERISTICS: MAX. COMPR. PRESSURE
P.PISTERN.12 COMPRESSOR CHARACT. 61 %
RATIO
COMPRESSOR LIMIT CHARACTERISTICS: MAX. COMPR. PRESSURE
P.PISTERN.13 COMPRESSOR CHARACT. 65.92 %
RATIO
COMPRESSOR LIMIT CHARACTERISTICS: MAX. COMPR. PRESSURE
P.PISTERN.14 COMPRESSOR CHARACT. 74.91 %
RATIO
COMPRESSOR LIMIT CHARACTERISTICS: MAX. COMPR. PRESSURE
MB
P.PISTERN.15 COMPRESSOR CHARACT. 82.93 %
RATIO
COMPRESSOR LIMIT CHARACTERISTICS: MAX. COMPR. PRESSURE
P.PISTERN.16 COMPRESSOR CHARACT. 80.26 %
RATIO
COMPRESSOR LIMIT CHARACTERISTICS: MAX. COMPR. PRESSURE
P.PISTERN.17 COMPRESSOR CHARACT. 69.56 %
RATIO
COMPRESSOR LIMIT CHARACTERISTICS: MAX. COMPR. PRESSURE
P.PISTERN.18 COMPRESSOR CHARACT. 48.15 %
RATIO
COMPRESSOR LIMIT CHARACTERISTICS: MAX. COMPR. PRESSURE
Limits and Settings
RATIO
COMPRESSOR LIMIT CHARACTERISTICS: MAX. COMPR. PRESSURE
P.PISTERN.22 COMPRESSOR CHARACT. 66.35 %
RATIO
COMPRESSOR LIMIT CHARACTERISTICS: MAX. COMPR. PRESSURE
P.PISTERN.23 COMPRESSOR CHARACT. 71.87 %
RATIO
COMPRESSOR LIMIT CHARACTERISTICS: MAX. COMPR. PRESSURE
P.PISTERN.24 COMPRESSOR CHARACT. 81.86 %
RATIO
COMPRESSOR LIMIT CHARACTERISTICS: MAX. COMPR. PRESSURE
P.PISTERN.25 COMPRESSOR CHARACT. 90.42 %
RATIO
COMPRESSOR LIMIT CHARACTERISTICS: MAX. COMPR. PRESSURE
P.PISTERN.26 COMPRESSOR CHARACT. 88.82 %
RATIO
0106E-X
3.1-0210-0592/41
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
RATIO
Power Generation
Technical Data
Siemens AG
COMPRESSOR LIMIT CHARACTERISTICS: MAX. COMPR. PRESSURE
P.PISTERN.32 COMPRESSOR CHARACT. 71.55 %
RATIO
COMPRESSOR LIMIT CHARACTERISTICS: MAX. COMPR. PRESSURE
P.PISTERN.33 COMPRESSOR CHARACT. 79.4 %
RATIO
COMPRESSOR LIMIT CHARACTERISTICS: MAX. COMPR. PRESSURE
P.PISTERN.34 COMPRESSOR CHARACT. 93.5 %
RATIO
COMPRESSOR LIMIT CHARACTERISTICS: MAX. COMPR. PRESSURE
P.PISTERN.35 COMPRESSOR CHARACT. 103.76 %
RATIO
COMPRESSOR LIMIT CHARACTERISTICS: MAX. COMPR. PRESSURE
P.PISTERN.36 COMPRESSOR CHARACT. 105.04 %
RATIO
COMPRESSOR LIMIT CHARACTERISTICS: MAX. COMPR. PRESSURE
P.PISTERN.37 COMPRESSOR CHARACT. 99.75 %
RATIO
COMPRESSOR LIMIT CHARACTERISTICS: MAX. COMPR. PRESSURE
P.PISTERN.38 COMPRESSOR CHARACT. 97.45 %
RATIO
MB
COMPRESSOR LIMIT CHARACTERISTICS: MAX. COMPR. PRESSURE
P.PISTERN.41 COMPRESSOR CHARACT. 60.04 %
RATIO
COMPRESSOR LIMIT CHARACTERISTICS: MAX. COMPR. PRESSURE
P.PISTERN.42 COMPRESSOR CHARACT. 80.39 %
RATIO
COMPRESSOR LIMIT CHARACTERISTICS: MAX. COMPR. PRESSURE
P.PISTERN.43 COMPRESSOR CHARACT. 88.01 %
RATIO
COMPRESSOR LIMIT CHARACTERISTICS: MAX. COMPR. PRESSURE
P.PISTERN.44 COMPRESSOR CHARACT. 104.03 %
RATIO
Limits and Settings
List of Control Settings
0106E-X
3.1-0210-0592/42
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
RATIO
Power Generation
Technical Data
Siemens AG
COMPRESSOR LIMIT CHARACTERISTICS: MAX. COMPR. PRESSURE
P.PISTERN.56 COMPRESSOR CHARACT. 144.17 %
RATIO
COMPRESSOR LIMIT CHARACTERISTICS: MAX. COMPR. PRESSURE
P.PISTERN.57 COMPRESSOR CHARACT. 142.46 %
RATIO
COMPRESSOR LIMIT CHARACTERISTICS: MAX. COMPR. PRESSURE
P.PISTERN.58 COMPRESSOR CHARACT. 143.03 %
RATIO
COMPRESSOR LIMIT CHARACTERISTICS: MAX. COMPR. PRESSURE
P.PISTERN.61 COMPRESSOR CHARACT. 16.05 %
RATIO
COMPRESSOR LIMIT CHARACTERISTICS: MAX. COMPR. PRESSURE
P.PISTERN.62 COMPRESSOR CHARACT. 65.28 %
RATIO
COMPRESSOR LIMIT CHARACTERISTICS: MAX. COMPR. PRESSURE
P.PISTERN.63 COMPRESSOR CHARACT. 80.55 %
RATIO
COMPRESSOR LIMIT CHARACTERISTICS: MAX. COMPR. PRESSURE
P.PISTERN.64 COMPRESSOR CHARACT. 110.18 %
RATIO
MB
COMPRESSOR LIMIT CHARACTERISTICS: MAX. COMPR. PRESSURE
P.PISTERN.65 COMPRESSOR CHARACT. 138.54 %
RATIO
COMPRESSOR LIMIT CHARACTERISTICS: MAX. COMPR. PRESSURE
P.PISTERN.66 COMPRESSOR CHARACT. 154.14 %
RATIO
COMPRESSOR LIMIT CHARACTERISTICS: MAX. COMPR. PRESSURE
P.PISTERN.67 COMPRESSOR CHARACT. 156.85 %
RATIO
COMPRESSOR LIMIT CHARACTERISTICS: MAX. COMPR. PRESSURE
P.PISTERN.68 COMPRESSOR CHARACT. 156.23 %
RATIO
Limits and Settings
List of Control Settings
0106E-X
3.1-0210-0592/43
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
RATIO
Power Generation
Technical Data
Siemens AG
P.SAMMLER.01 Pressure NG-drain-system 2 +0.5 bar Header pressure natural gas drainage system, header depressurized
P.SCHMOEL.01 PRESSURE LUBE-OIL 1.5 +0.2 bar START OF AUXILLIARY LUBE OIL PUMP
P.SCHMOEL.02 PRESSURE LUBE-OIL 0.5 -0.1 bar TEST OF EMERGENCY LUBE OIL PUMP
P.SCHMOEL.03 PRESSURE LUBE-OIL TANK -5.0 -0.5 mbar MAXIMUM PRESSURE IN LUBE OIL TANK (NEGATIVE PRESSURE)
P.SCHMOEL.04 PRESSURE LUBE-OIL TANK -8.0 +0.5 mbar MINIMUM PRESSURE IN LUBE OIL TANK (NEGATIVE PRESSURE)
COMPR. OUTLET PRESSURE at FLUSHING POSITION OF FO-DM-CV
P.VII.06 compressor discharge pressure 8 bar
G.HOEDB.03
COMPR. OUTLET PRESSURE at FLUSHING POSITION OF FO-DM-CV
P.VII.07 compressor discharge pressure 10 bar
G.HOEDB.04
COMPR. OUTLET PRESSURE at FLUSHING POSITION OF FO-DM-CV
P.VII.08 compressor discharge pressure 12 bar
G.HOEDB.05
COMPR. OUTLET PRESSURE at FLUSHING POSITION OF FO-DM-CV
P.VII.09 compressor discharge pressure 14 bar
G.HOEDB.06
MB
COMPR. OUTLET PRESSURE at FLUSHING POSITION OF FO-DM-CV
P.VII.10 compressor discharge pressure 16 bar
G.HOEDB.07
COMPR. OUTLET PRESSURE at FLUSHING POSITION OF FO-DM-CV
P.VII.11 compressor discharge pressure 18 bar
G.HOEDB.08
P.VII.12 comprssor discharge pressure 8.0 bar abs compr. discharge pressure at NG-PM filling time K.EGVB.04
P.VII.13 comprssor discharge pressure 11.0 bar abs compr. discharge pressure at NG-PM filling time K.EGVB.05
P.VII.14 comprssor discharge pressure 12.4 bar abs compr. discharge pressure at NG-PM filling time K.EGVB.06
Limits and Settings
P.VII.15 comprssor discharge pressure 8.0 bar abs compr. discharge pressure at purge water flow F.SPUDB.02
List of Control Settings
P.VII.16 comprssor discharge pressure 11.0 bar abs compr. discharge pressure at purge water flow F.SPUDB.03
P.VII.17 comprssor discharge pressure 12.4 bar abs compr. discharge pressure at purge water flow F.SPUDB.04
P.VII.18 comprssor discharge pressure 13.4 bar abs compr. discharge pressure at FO-DM filling time K.SPUDB.04
P.VII.19 comprssor discharge pressure 14.0 bar abs compr. discharge pressure at FO-DM filling time K.SPUDB.05
P.VII.20 comprssor discharge pressure 14.0 bar abs compr. discharge pressure at NG-PM filling time K.EGVB.07
P.VII.21 comprssor discharge pressure 15.7 bar abs compr. discharge pressure at NG-PM filling time K.EGVB.08
P.VII.22 comprssor discharge pressure 20.0 bar abs compr. discharge pressure at NG-PM filling time K.EGVB.09
P.VII.23 comprssor discharge pressure 14.0 bar abs compr. discharge pressure at purge water flow F.SPUDB.05
P.VII.24 comprssor discharge pressure 15.7 bar abs compr. discharge pressure at purge water flow F.SPUDB.06
0106E-X
3.1-0210-0592/44
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
Siemens AG
PK.PVI.01 compr. inlet pressure rate 16 mbar/min Gradient for compressor inlet pressure in the controller
PP.BK.01 REL. CC-PRESS. LOSS 1.8 +0.1 % RELEASE PM < X < CHANGEOVER FROM PM TO DM / Alarm
PP.HOE.08 PRESSURE 12 +3 bar Release for FO-DO RETURN-V close
PP.HOE.11 FUEL OIL PRESSURE 18197 bar s/kg m NOZZLE CHARACTERISTIC 1 FO-pressure at F.HOE.11
PP.HOE.12 FUEL OIL PRESSURE 18197 bar s/kg m NOZZLE CHARACTERISTIC 1 FO-pressure at F.HOE.12
PP.HOE.13 FUEL OIL PRESSURE 19360 bar s/kg m NOZZLE CHARACTERISTIC 1 FO-pressure at F.HOE.13
PP.HOE.14 FUEL OIL PRESSURE 20028 bar s/kg m NOZZLE CHARACTERISTIC 1 FO-pressure at F.HOE.14
PP.HOE.15 FUEL OIL PRESSURE 20619 bar s/kg m NOZZLE CHARACTERISTIC 1 FO-pressure at F.HOE.15
PP.HOE.16 FUEL OIL PRESSURE 20872 bar s/kg m NOZZLE CHARACTERISTIC 1 FO-pressure at F.HOE.16
PP.HOE.17 FUEL OIL PRESSURE 21009 bar s/kg m NOZZLE CHARACTERISTIC 1 FO-pressure at F.HOE.17
PP.HOE.18 FUEL OIL PRESSURE 21416 bar s/kg m NOZZLE CHARACTERISTIC 1 FO-pressure at F.HOE.18
MB
PP.HOE.19 FUEL OIL PRESSURE 22383 bar s/kg m NOZZLE CHARACTERISTIC 1 FO-pressure at F.HOE.19
PP.HOE.20 FUEL OIL PRESSURE 24036 bar s/kg m NOZZLE CHARACTERISTIC 1 FO-pressure at F.HOE.20
PP.HOE.21 FUEL OIL PRESSURE 25256 bar s/kg m NOZZLE CHARACTERISTIC 1 FO-pressure at F.HOE.21
PP.HOE.22 FUEL OIL PRESSURE 28638 bar s/kg m NOZZLE CHARACTERISTIC 1 FO-pressure at F.HOE.22
PP.HOE.23 FUEL OIL PRESSURE 32356 bar s/kg m NOZZLE CHARACTERISTIC 1 FO-pressure at F.HOE.23
PP.HOE.24 FUEL OIL PRESSURE 40096 bar s/kg m NOZZLE CHARACTERISTIC 1 FO-pressure at F.HOE.24
PP.HOE.25 FUEL OIL PRESSURE 47260 bar s/kg m NOZZLE CHARACTERISTIC 1 FO-pressure at F.HOE.25
Limits and Settings
List of Control Settings
PP.HOE.26 FUEL OIL PRESSURE 53627 bar s/kg m NOZZLE CHARACTERISTIC 1 FO-pressure at F.HOE.26
PP.HOE.27 FUEL OIL PRESSURE 59315 bar s/kg m NOZZLE CHARACTERISTIC 1 FO-pressure at F.HOE.27
PP.HOE.28 FUEL OIL PRESSURE 64438 bar s/kg m NOZZLE CHARACTERISTIC 1 FO-pressure at F.HOE.28
PP.HOE.29 FUEL OIL PRESSURE 71322 bar s/kg m NOZZLE CHARACTERISTIC 1 FO-pressure at F.HOE.29
PP.HOE.30 FUEL OIL PRESSURE 77760 bar s/kg m NOZZLE CHARACTERISTIC 1 FO-pressure at F.HOE.30
PP.HOE.31 FUEL OIL PRESSURE 3648 bar s/kg m NOZZLE CHARACTERISTIC 1 FO-pressure at F.HOE.31
PP.HOE.32 FUEL OIL PRESSURE 3648 bar s/kg m NOZZLE CHARACTERISTIC 2 FO-pressure at F.HOE.32
PP.HOE.33 FUEL OIL PRESSURE 4795 bar s/kg m NOZZLE CHARACTERISTIC 2 FO-pressure at F.HOE.33
PP.HOE.34 FUEL OIL PRESSURE 5424 bar s/kg m NOZZLE CHARACTERISTIC 2 FO-pressure at F.HOE.34
0106E-X
3.1-0210-0592/45
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
PP.HOE.38 FUEL OIL PRESSURE 6895 bar s/kg m NOZZLE CHARACTERISTIC 2 FO-pressure at F.HOE.38
Siemens AG
PP.HOE.39 FUEL OIL PRESSURE 8042 bar s/kg m NOZZLE CHARACTERISTIC 2 FO-pressure at F.HOE.39
PP.HOE.40 FUEL OIL PRESSURE 9944 bar s/kg m NOZZLE CHARACTERISTIC 2 FO-pressure at F.HOE.40
PP.HOE.41 FUEL OIL PRESSURE 11317 bar s/kg m NOZZLE CHARACTERISTIC 2 FO-pressure at F.HOE.41
PP.HOE.42 FUEL OIL PRESSURE 15046 bar s/kg m NOZZLE CHARACTERISTIC 2 FO-pressure at F.HOE.42
PP.HOE.43 FUEL OIL PRESSURE 19071 bar s/kg m NOZZLE CHARACTERISTIC 2 FO-pressure at F.HOE.43
PP.HOE.44 FUEL OIL PRESSURE 27371 bar s/kg m NOZZLE CHARACTERISTIC 2 FO-pressure at F.HOE.44
PP.HOE.45 FUEL OIL PRESSURE 35111 bar s/kg m NOZZLE CHARACTERISTIC 2 FO-pressure at F.HOE.45
PP.HOE.46 FUEL OIL PRESSURE 42062 bar s/kg m NOZZLE CHARACTERISTIC 2 FO-pressure at F.HOE.46
PP.HOE.47 FUEL OIL PRESSURE 48295 bar s/kg m NOZZLE CHARACTERISTIC 2 FO-pressure at F.HOE.47
PP.HOE.48 FUEL OIL PRESSURE 53878 bar s/kg m NOZZLE CHARACTERISTIC 2 FO-pressure at F.HOE.48
PP.HOE.49 FUEL OIL PRESSURE 61199 bar s/kg m NOZZLE CHARACTERISTIC 2 FO-pressure at F.HOE.49
PP.HOE.50 FUEL OIL PRESSURE 67820 bar s/kg m NOZZLE CHARACTERISTIC 2 FO-pressure at F.HOE.50
MB
PP.HOEDB.09 FUEL OIL PRESSURE 5 -0.1 bar MIN. PRESSURE DIFFERENCE FO-DO-Feed to CC
PP.HOEVB.04 FUEL OIL PRESSURE 3.0 bar PRESSURE SETPOINT FO-PM-CV AT CHANGEOVER DM/PM
PP.HOEVB.07 FUEL OIL PRESSURE 2.5 -0.1 bar MIN. PRESSURE DIFFERENCE FO-PO-Feed to CC
PP.HOEVB.08 FUEL OIL PRESSURE 1 -0.1 bar MIN. PRESSURE DIFFERENCE FO-PO-Feed to CC DURING FILLING
PP.SPUEL.01 DIFFERENT. PRESSURE 0.5 -0.4 bar DIFF.PRESS. FO-FLUSH.WATER TO COMPR.OUTL. >MIN
PP.TLE2.01 CONTROL RATIO COOL.AIR 0.69 --- CONTROL RATIO COOL.AIR (pTLe2/pVII)
Limits and Settings
List of Control Settings
0106E-X
3.1-0210-0592/46
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
QU.HU.04 NG-heating value 50 MJ/kg NG-heating value for pilotgas kurve higher heating value
Siemens AG
S.ACC.01 CC-Acceleration 2.5 -0.2 g combustion chamber acceleration limit 1, FG operation
S.ACC.02 CC-Acceleration 3 -0.2 g combustion chamber acceleration limit 2, FG operation
S.ACC.03 CC-Acceleration 8 -5.7 g combustion chamber acceleration limit 3
S.ACC.04 CC-Acceleration 2.5 -0.2 g combustion chamber acceleration limit 1, FO operation
S.ACC.05 CC-Acceleration 3 -0.2 g combustion chamber acceleration limit 2, FO operation
S.ACC.06 CC-Acceleration 0.1 +0.2 g combustion chamber acceleration limit of sensor monitoring
S.ACC.07 CC-Acceleration 1.5 -0.2 g combustion chamber acceleration limit 4, FG operation
S.ACCFREQ.01 CC-Acceleration 10...1000 Hz band pass for acceleration monitoring
S.LAGER.00 VIBRATION PROTECTION 20 ... 200 Hz BAND PASS FOR VIBRATION PROTECTION
COMPRESSOR LIMIT CHARACTERISTICS: COORDINATES FOR
S.NSTERN.01 COMPRESSOR CHARACT. 85 %
REDUCED SPEED
COMPRESSOR LIMIT CHARACTERISTICS: COORDINATES FOR
S.NSTERN.02 COMPRESSOR CHARACT. 90 %
MB
REDUCED SPEED
COMPRESSOR LIMIT CHARACTERISTICS: COORDINATES FOR
S.NSTERN.03 COMPRESSOR CHARACT. 91.7 %
REDUCED SPEED
COMPRESSOR LIMIT CHARACTERISTICS: COORDINATES FOR
S.NSTERN.04 COMPRESSOR CHARACT. 95 %
REDUCED SPEED
COMPRESSOR LIMIT CHARACTERISTICS: COORDINATES FOR
S.NSTERN.05 COMPRESSOR CHARACT. 100 %
REDUCED SPEED
COMPRESSOR LIMIT CHARACTERISTICS: COORDINATES FOR
S.NSTERN.06 COMPRESSOR CHARACT. 105 %
Limits and Settings
REDUCED SPEED
List of Control Settings
0106E-X
3.1-0210-0592/47
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
S.TURB.10 TURBINE SPEED 47.5 +0.2 s-1 95% OF NOM. SPEED
Technical Data
S.TURB.102 TURBINE SPEED 25.0 -0.5 s-1 opening of pg-cv to position to F.PILOT.30
Siemens AG
S.TURB.103 TURBINE SPEED 4.0 -0.2 s-1 Release offline compressor cleaning (start water injection)
S.TURB.104 TURBINE SPEED 30 s-1 BEGIN 3.OPENING RATE OF NG-CV AT STARTUP WITH NG
S.TURB.105 TURBINE SPEED 100 s-1 BEGIN 3.OPENING RATE OF FO-CV AT STARTUP WITH FO
S.TURB.106 TURBINE SPEED 0 s-1 limiting function, startup with NG, 1.point of characteristic
S.TURB.107 TURBINE SPEED 13 s-1 limiting function, startup with NG, 2.point of characteristic
S.TURB.108 TURBINE SPEED 31 s-1 limiting function, startup with NG, 3.point of characteristic
S.TURB.109 TURBINE SPEED 39 s-1 limiting function, startup with NG, 4.point of characteristic
S.TURB.110 TURBINE SPEED 50 s-1 limiting function, startup with NG, 5.point of characteristic
S.TURB.111 TURBINE SPEED 1000000 s-1 limiting function, startup with NG, 6.point of characteristic
S.TURB.112 TURBINE SPEED 0 s-1 limiting function, startup with FO, 1.point of characteristic
S.TURB.113 TURBINE SPEED 13.5 s-1 limiting function, startup with FO, 2.point of characteristic
MB
S.TURB.114 TURBINE SPEED 31 s-1 limiting function, startup with FO, 3.point of characteristic
S.TURB.115 TURBINE SPEED 39.5 s-1 limiting function, startup with FO, 4.point of characteristic
S.TURB.116 TURBINE SPEED 50 s-1 limiting function, startup with FO, 5.point of characteristic
S.TURB.117 TURBINE SPEED 1000000 s-1 limiting function, startup with FO, 6.point of characteristic
S.TURB.118 TURBINE SPEED 45.0 s-1 closing pilotgas-cv after startup
S.TURB.12 TURBINE SPEED 8.33 +0.2 s-1 E.G. SWITCH ON/OFF OF THE LIFTING OIL PUMP
Limits and Settings
S.TURB.122 TURBINE SPEED 46.5 +1.0 s-1 opening blowoff valves and trip at underfrequency
List of Control Settings
S.TURB.124 TURBINE SPEED 25 s-1 Additional NG-PM during NG-start with F.EGVB.37
S.TURB.125 TURBINE SPEED 27 s-1 Additional NG-PM during NG-start with F.EGVB.38
S.TURB.126 TURBINE SPEED 38 s-1 Additional NG-PM during NG-start with F.EGVB.39
S.TURB.127 TURBINE SPEED 45 s-1 Additional NG-PM during NG-start with F.EGVB.40
S.TURB.128 TURBINE SPEED 49 s-1 Additional NG-PM during NG-start with F.EGVB.41
S.TURB.129 TURBINE SPEED 50 s-1 Additional NG-PM during NG-start with F.EGVB.42
CLOSE COMPR. BLOW OFF DAMPERS 1, CLOSE COMPR. BLOW OFF
S.TURB.13 TURBINE SPEED 49.0 -0.5 s-1
DAMPER 3 AT START-UP WITH GAS at V94.yA
Speed limit for switch over to higher frequency response gradient
S.TURB.130 TURBINE SPEED 50.25 s-1
(SK.TURB.09, for island operation)
0106E-X
3.1-0210-0592/48
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
S.TURB.30 TURBINE SPEED 6.6 -1.0 s-1 CONDITION FOR OPENING OF FO-DM-ESV AT FO-START
Siemens AG
S.TURB.31 TURBINE SPEED 5.5 -0.4 s-1 IGNITION AT START-UP WITH FO
RELEASE IGNIGTION AND SWITCH OFF IGNITION AT START UP WITH
S.TURB.32 TURBINE SPEED 18.0 -0.5 s-1
OIL
S.TURB.37 TURBINE SPEED 15.0 -0.5 s-1 SPEED > 30% OF NOM. SPEED AT START UP, counter of oper. hours
S.TURB.38 TURBINE SPEED 11.5 -0.9 s-1 boiler purging speed monitoring
S.TURB.40 TURBINE SPEED 26 -1 s-1 RELEASE FOR FO -DIFF FLUSHING
S.TURB.51 TURBINE SPEED 47.5 s-1 SWITCH ON OF SPEED GOVERNOR AT START UP
S.TURB.52 TURBINE SPEED 51.5 s-1 UPPER LIMIT OF SPEED SET POINT
S.TURB.53 TURBINE SPEED 11 s-1 BEGIN 1.OPENING RATE OF NG-CV AT STARTUP WITH NG
S.TURB.54 TURBINE SPEED 18 s-1 BEGIN 2.OPENING RATE OF NG-CV AT STARTUP WITH NG
BEGIN OF 1. OPENING RATE OF OIL CONTROL VALVE AT STARTUP
S.TURB.55 TURBINE SPEED 18.33 s-1
WITH OIL
MB
BEGIN OF 2. OPENING RATE OF OIL CONTROL VALVE AT STARTUP
S.TURB.56 TURBINE SPEED 30.8 s-1
WITH OIL
S.TURB.68 TURBINE SPEED 51.5 -0.2 s-1 speed > 103% of nom. speed
SPEED <94% OF NOM. SPEED, SPEED MONITORING (PROTECTION),
S.TURB.70 TURBINE SPEED 47.0 +0.5 s-1
Blow off damper control at fuel oil start-up
S.TURB.71 TURBINE SPEED 52.0 -0.2 s-1 SPEED >104% OF NOM. SPEED, SPEED MONITORING (PROTECTION)
S.TURB.72 TURBINE SPEED 54.0 -1.62 s-1 SPEED 108% OF NOM. SPEED, OVERSPEED PROTECTION, TRIP
S.TURB.82 TURBINE SPEED 0.01 s-1 SPEED DEADBAND (+/-) PRIMARY FREQUENCY INFLUENCE
Limits and Settings
List of Control Settings
S.TURB.84 TURBINE SPEED 49.75 s-1 SETPOINT LIMIT FREQUENCY INFLUENCE UNDERFREQUENCY
S.TURB.85 TURBINE SPEED 50.25 s-1 SETPOINT LIMIT FREQUENCY INFLUENCE OVERFREQUENCY
S.TURB.88 TURBINE SPEED 18.0 -0.5 s-1 SWITCH OFF IGNITION GAS AT START UP WITH FO
S.TURB.89 TURBINE SPEED 0.5 -0.1 s-1 min. speed for switch on turning gear
opening compressor inlet guide vanes from start-positon to U.VLE.14/15/17
S.TURB.96 TURBINE SPEED >45 s-1
at start-up
S.TURB.97 TURBINE SPEED >15 s-1 closing compressor inlet guide vanes to start-position at start-up
S.TURB.98 TURBINE SPEED 11.7 s-1 boiler purging speed, lower limit
S.TURB.99 TURBINE SPEED 13.3 s-1 boiler purging speed, upper limit
SE.STATIK SPEED DROOP 5% DROOP OF SPEED GOVERNOR
0106E-X
3.1-0210-0592/49
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
Siemens AG
SE.STATIK.05 SPEED DROOP 0 --- gain of speed governor, delayed with K.STATIK.01
SE.STATIK.06 SPEED DROOP 3 --- Droop for primary frequency influence, lower limit
SE.STATIK.07 SPEED DROOP 8 --- Droop for primary frequency influence, upper limit
max. change rate for primary frequency influence, load set-point-correction,
SK.TURB.05 SPEED CONTROLLER 1.5 %/s
fuel gas
max. speed change rate for frequency influence on controller input for
SK.TURB.07 SPEED CONTROLLER 0.1 %/s
IGVs open
max. change rate for frequency influence after partly load rejection / at
SK.TURB.09 SPEED CONTROLLER 1.5 %/s
island operation (natural gas)
max. speed change rate for frequency influence on controller input at IGV <
SK.TURB.11 SPEED CONTROLLER 0.1 %/s
G.VLE0.22
max. speed change rate for frequency influence on controller input at
SK.TURB.13 SPEED CONTROLLER 0.1 %/s
G.VLE0.22 < IGV < G.VLE0.21
ST.PUMP.03 REDUCED SPEED 0.932 +0.01 --- LOWER LIMIT VALUE REDUCED SPEED N* FOR WATER/STEAM TRIP
MB
ST.PUMP.04 REDUCED SPEED 0.85 --- REDUCED SPEED N* at U.LSV.07
ST.PUMP.05 REDUCED SPEED 0.9 --- REDUCED SPEED N* at U.LSV.08
ST.PUMP.06 REDUCED SPEED 0.91 --- REDUCED SPEED N* at U.LSV.09
ST.PUMP.07 REDUCED SPEED 0.924 --- REDUCED SPEED N* at U.LSV.10
ST.PUMP.08 REDUCED SPEED 0.926 --- REDUCED SPEED N* at U.LSV.11
ST.PUMP.09 REDUCED SPEED 1.2 --- REDUCED SPEED N* at U.LSV.12
Limits and Settings
List of Control Settings
0106E-X
3.1-0210-0592/50
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
T.GAS.02 NATURAL GAS TEMP. 210 -5 C NG TEMPERATURE TOO HIGH, NG TRIP
Technical Data
Siemens AG
T.HYD.01 HIGHPR.-HYDRAULIC <20 C HYDRAULIC-OIL-HEATING ON
T.HYD.02 HIGHPR.-HYDRAULIC >25 C HYDRAULIC-OIL-HEATING OFF
T.HYD.03 HIGHPR.-HYDRAULIC >45 C HYDRAULIC-OIL-COOLING, FAN OFF
T.HYD.04 HIGHPR.-HYDRAULIC >55 C HYDRAULIC-OIL-COOLING, FAN ON
T.HYD.05 HIGHPR.-HYDRAULIC 70 -5 C ALARM "HYDRAULIC-OIL-TEMP. > MAX."
T.HYD.06 HIGHPR.-HYDRAULIC 10 +5 C MESSAGE HYDRAULIC OIL TEMPERATURE << MIN
T.HYD.07 HIGHPR.-HYDRAULIC 0 +5 C MESSAGE HYDRAULIC OIL TEMPERATURE TOO LOW, PUMPS OFF
T.LAGER.M BEARING TEMPERATURE 110 -5 C ALARM "BEARING TEMP. HIGH"
T.LAGER.M01 TURBINE BEARING 110 -5 C ALARM "TURBINE BEARING TEMP. HIGH"
T.LAGER.S COMPR. + TURB. BEAR. 120 -5 C TRIP AT BEARING TEMP. HIGH
T.SAMMLER.01 Temperature NG-drain-system 5 +2 C Header temperature natural gas drainage system too low
MB
T.SAMMLER.02 Temperature NG-drain-system 80 -2 C Header temperature natural gas drainage system too high
T.SCHMOEL.01 temp. lube oil tank 10 -3 C lube oil tanktemperature, start-up release
T.SCHMOEL.02 temp. lube oil tank 15 -3 C lube oil tanktemperature, heating on/off
T.SCHMOEL.03 temp. lube oil tank 20 -3 C lube oil tanktemperature, heating off
T.SCHMOEL.04 temp. lube oil feed 58 -3 C lube oil feed temperature high, alarm
T.SPERRL.01 Seal Air Temperature 90 +5 C seal air temperature low, alarm
Limits and Settings
T.SPERRL.02 Seal Air Temperature 180 -5 C seal air temperature high, alarm
List of Control Settings
T.SPERRL.03 Seal Air Temperature 220 -5 C seal air temperature too high, trip
T.SPERRL.04 Seal Air Temperature 130 C seal air temperature setpoint
T.VI.00 TEMP. UPSTR. COMPR. -50 ... +60 C COMP. INLET TEMP. RANGE FOR MEASURING AND INDICATION
OTC setpoint decrease fr "NOx = const.": compressor inlet temperature for
T.VI.12 TEMP. UPSTR. COMPR. -20 C
TT.ATK.D18 and TT.ATK.D32 (NG operation)
OTC setpoint decrease fr "NOx = const.": compressor inlet temperature for
T.VI.13 TEMP. UPSTR. COMPR. -10 C
TT.ATK.D19 and TT.ATK.D33 (NG operation)
OTC setpoint decrease fr "NOx = const.": compressor inlet temperature for
T.VI.14 TEMP. UPSTR. COMPR. 0 C
TT.ATK.D20 and TT.ATK.D34 (NG operation)
OTC setpoint decrease fr "NOx = const.": compressor inlet temperature for
T.VI.15 TEMP. UPSTR. COMPR. 5 C
TT.ATK.D21 and TT.ATK.D35 (NG operation)
0106E-X
3.1-0210-0592/51
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
Siemens AG
OTC setpoint decrease fr "NOx = const.": compressor inlet temperature for
T.VI.19 TEMP. UPSTR. COMPR. -10 C
TT.ATK.D25 and TT.ATK.D39 (FO operation)
OTC setpoint decrease fr "NOx = const.": compressor inlet temperature for
T.VI.20 TEMP. UPSTR. COMPR. 0 C
TT.ATK.D26 and TT.ATK.D40 (FO operation)
OTC setpoint decrease fr "NOx = const.": compressor inlet temperature for
T.VI.21 TEMP. UPSTR. COMPR. 5 C
TT.ATK.D27 and TT.ATK.D41 (FO operation)
OTC setpoint decrease fr "NOx = const.": compressor inlet temperature for
T.VI.22 TEMP. UPSTR. COMPR. 10 C
TT.ATK.D28 and TT.ATK.D42 (FO operation)
OTC setpoint decrease fr "NOx = const.": compressor inlet temperature for
T.VI.23 TEMP. UPSTR. COMPR. 15 C
TT.ATK.D29 and TT.ATK.D43 (FO operation)
T.VI.26 TEMP. UPSTR. COMPR. -20 C additv Pilotgasflow F.PILOT.92 for NG-PM at T.VI.26
T.VI.27 TEMP. UPSTR. COMPR. -5 C additv Pilotgasflow F.PILOT.93 for NG-PM at T.VI.27
T.VI.28 TEMP. UPSTR. COMPR. 0 C additv Pilotgasflow F.PILOT.94 for NG-PM at T.VI.28
MB
T.VI.29 TEMP. UPSTR. COMPR. 5 C additv Pilotgasflow F.PILOT.95 for NG-PM at T.VI.29
T.VI.30 TEMP. UPSTR. COMPR. 15 C additv Pilotgasflow F.PILOT.96 for NG-PM at T.VI.30
OTC setpoint, compressor inlet temperature limit for activation of operating
T.VI.38 TEMP. UPSTR. COMPR. -5 C
mode "overfiring"
limit for TEMPERATURE CONTROL DEVIATION OF COMPR. I.G.V.
T.VLE.01 TEMP. C.I.G.V. CONT. 20 C
CONTROLLER
T.VLE.02 TEMP. C.I.G.V. CONT. 0K Dead band for temperatur control deviation for IGV controller
Limits and Settings
0106E-X
3.1-0210-0592/52
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
CALCULATION OF OTC
Power Generation
Technical Data
TT.AT.07 TURB.EXHAUST, CORR. 650 -10 C Hot-Spot monitoring during start-up, warning
Siemens AG
TT.AT.08 TURB.EXHAUST, CORR. 700 -10 C Hot-Spot monitoring during start-up, trip
TT.ATK.00 TURB.EXHAUST, CORR. - 50 ... +700 C OTC-TEMPERATURE RANGE FOR MEASURING AND INDICATION
TRANSFER FROM DIFFUSION- TO PREMIX-BURNER (HOE-
TT.ATK.02 TURB.EXHAUST, CORR. 480 -2 C
OPERATION)
TRANSFER FROM PREMIX- TO DIFFUSION-BURNER (HOE-
TT.ATK.05 TURB.EXHAUST, CORR. 470 +2 C
OPERATION)
Pilotgasflow for NG-PM additiv, IGV closed, OTC at F.PILOT.113, low heat
TT.ATK.102 TURB.EXHAUST, CORR. 200 C
value
Pilotgasflow for NG-PM additiv, IGV closed, OTC at F.PILOT.114, low heat
TT.ATK.103 TURB.EXHAUST, CORR. 500 C
value
Pilotgasflow for NG-PM additiv, IGV closed, OTC at F.PILOT.115, low heat
TT.ATK.104 TURB.EXHAUST, CORR. 520 C
value
Pilotgasflow for NG-PM additiv, IGV closed, OTC at F.PILOT.116, low heat
TT.ATK.105 TURB.EXHAUST, CORR. 530 C
value
MB
Pilotgasflow for NG-PM additiv, IGV closed, OTC at F.PILOT.117, low heat
TT.ATK.106 TURB.EXHAUST, CORR. 560 C
value
Pilotgasflow for NG-PM additiv, IGV closed, OTC at F.PILOT.118, low heat
TT.ATK.107 TURB.EXHAUST, CORR. 700 C
value
TT.ATK.11 TURB.EXHAUST, CORR. 300 -10 C RELEASE HOT-SPOT-PROTECTION
TT.ATK.41 TURB.EXHAUST, CORR. -41 C ATK FOR IGNITION ADAPTION AT F.EG.21, F.HOE.143, G.HOE.
TT.ATK.42 TURB.EXHAUST, CORR. -20 C ATK FOR IGNITION ADAPTION AT F.EG.22, F.HOE.144, G.HOE.
Limits and Settings
TT.ATK.43 TURB.EXHAUST, CORR. 0 C ATK FOR IGNITION ADAPTION AT F.EG.23, F.HOE.145, G.HOE.
List of Control Settings
TT.ATK.44 TURB.EXHAUST, CORR. +15 C ATK FOR IGNITION ADAPTION AT F.EG.24, F.HOE.146, G.HOE.
TT.ATK.45 TURB.EXHAUST, CORR. +100 C ATK FOR IGNITION ADAPTION AT F.EG.25, F.HOE.147, G.HOE.
TT.ATK.46 TURB.EXHAUST, CORR. +300 C ATK FOR IGNITION ADAPTION AT F.EG.26, F.HOE.148, G.HOE.
TT.ATK.48 TURB.EXHAUST, CORR. 300 C Pilotgasflow for NG-DM: OTC at F.PILOT.21
TT.ATK.49 TURB.EXHAUST, CORR. 310 C Pilotgasflow for NG-DM: OTC at F.PILOT.22
TT.ATK.50 TURB.EXHAUST, CORR. 320 C Pilotgasflow for NG-DM: OTC at F.PILOT.23
TT.ATK.51 TURB.EXHAUST, CORR. 330 C Pilotgasflow for NG-DM: OTC at F.PILOT.24
TT.ATK.52 TURB.EXHAUST, CORR. 340 C Pilotgasflow for NG-DM: OTC at F.PILOT.25
TT.ATK.53 TURB.EXHAUST, CORR. 350 C Pilotgasflow for NG-DM: OTC at F.PILOT.26
0106E-X
3.1-0210-0592/53
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
Siemens AG
TT.ATK.58 TURB.EXHAUST, CORR. 340 C Pilotgasflow for NG-DMPM-MM: OTC at F.PILOT.37
TT.ATK.59 TURB.EXHAUST, CORR. 350 C Pilotgasflow for NG-DMPM-MM: OTC at F.PILOT.38
TT.ATK.60 TURB.EXHAUST, CORR. 320 C PM-partition in NG-DMPM-Mixed Operation for J.EGANT.01
TT.ATK.61 TURB.EXHAUST, CORR. 360 C PM-partition in NG-DMPM-Mixed Operation for J.EGANT.02
TT.ATK.62 TURB.EXHAUST, CORR. 440 C PM-partition in NG-DMPM-Mixed Operation for J.EGANT.03
TT.ATK.63 TURB.EXHAUST, CORR. 480 C PM-partition in NG-DMPM-Mixed Operation for J.EGANT.04
TT.ATK.64 TURB.EXHAUST, CORR. 500 C PM-partition in NG-DMPM-Mixed Operation for J.EGANT.05
TT.ATK.65 TURB.EXHAUST, CORR. 650 C PM-partition in NG-DMPM-Mixed Operation for J.EGANT.06
forced switch back to NG-DM during switch over from NG-DM to NG-
TT.ATK.66 TURB.EXHAUST, CORR. 290 +2 C
DMPM-MIX
TT.ATK.67 TURB.EXHAUST, CORR. 500 +2 C GT trip during fuel changeover NG-PM <-> FO
TT.ATK.68 TURB.EXHAUST, CORR. 520 -2 C release fuel changeover NG-PM <-> FO
MB
TT.ATK.70 TURB.EXHAUST, CORR. 200 C Pilotgasflow for NG-PM additiv, IGV closed, OTC at F.PILOT.69
TT.ATK.71 TURB.EXHAUST, CORR. 500 C Pilotgasflow for NG-PM additiv, IGV closed, OTC at F.PILOT.70
TT.ATK.72 TURB.EXHAUST, CORR. 520 C Pilotgasflow for NG-PM additiv, IGV closed, OTC at F.PILOT.71
TT.ATK.73 TURB.EXHAUST, CORR. 530 C Pilotgasflow for NG-PM additiv, IGV closed, OTC at F.PILOT.72
TT.ATK.74 TURB.EXHAUST, CORR. 560 C Pilotgasflow for NG-PM additiv, IGV closed, OTC at F.PILOT.73
TT.ATK.75 TURB.EXHAUST, CORR. 700 C Pilotgasflow for NG-PM additiv, IGV closed, OTC at F.PILOT.74
Limits and Settings
TT.ATK.77 TURB.EXHAUST, CORR. 535 C Low limit of max. external temperature setpoint (TSMAX)
List of Control Settings
TT.ATK.78 TURB.EXHAUST, CORR. 340 C Low limit of external temperature setpoint (TSX)
TT.ATK.80 TURB.EXHAUST, CORR. 560 C Pilotgasflow for NG-PM additiv, IGV open, OTC at F.PILOT.77
TT.ATK.81 TURB.EXHAUST, CORR. 565 C Pilotgasflow for NG-PM additiv, IGV open, OTC at F.PILOT.78
TT.ATK.82 TURB.EXHAUST, CORR. 570 C Pilotgasflow for NG-PM additiv, IGV open, OTC at F.PILOT.79
TT.ATK.83 TURB.EXHAUST, CORR. 575 C Pilotgasflow for NG-PM additiv, IGV open, OTC at F.PILOT.80
TT.ATK.84 TURB.EXHAUST, CORR. 580 C Pilotgasflow for NG-PM additiv, IGV open, OTC at F.PILOT.81
TT.ATK.85 TURB.EXHAUST, CORR. 590 C Pilotgasflow for NG-PM additiv, IGV open, OTC at F.PILOT.82
TT.ATK.86 TURB.EXHAUST, CORR. 560 C Temperature fuelcangeover
TT.ATK.87 TURB.EXHAUST, CORR. 200 C Correction factor of combustion efficieny
0106E-X
3.1-0210-0592/54
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
Siemens AG
TT.ATK.92 TURB.EXHAUST, CORR. 550 C Correction factor of combustion efficieny
TT.ATK.93 TURB.EXHAUST, CORR. 0 C Correction factor of combustion efficieny
TT.ATK.94 TURB.EXHAUST, CORR. 380 C Correction factor of combustion efficieny
TT.ATK.95 TURB.EXHAUST, CORR. 450 C Correction factor of combustion efficieny
TT.ATK.96 TURB.EXHAUST, CORR. 470 C Correction factor of combustion efficieny
TT.ATK.97 TURB.EXHAUST, CORR. 490 C Correction factor of combustion efficieny
TT.ATK.98 TURB.EXHAUST, CORR. 520 C Correction factor of combustion efficieny
TT.ATK.99 TURB.EXHAUST, CORR. 400 C temperature offset for hot and cold spot protection after loadrejection
TT.ATK.D01 TURB.EXHAUST, CORR. 10 K TT.ATK.GL+D01, SETPOINT FOR TEMP CONTROLLER AT PART LOAD
TT.ATK.GL-D02, SETPOINT FOR IGV CONTROLLER ABOVE BASE
TT.ATK.D02 TURB.EXHAUST, CORR. 5K
LOAD
TT.ATK.D09 TURB.EXHAUST, CORR. 10 K difference above base load OTC, for the counter of the operating hours
MB
DIFFERENCE FOR INLET-GUIDEVANE-CONTROLLER-SETPOINT FOR
TT.ATK.D12 TURB.EXHAUST, CORR. 0K
FUEL OIL CHANGEOVER
OTC setpoint decrease for "NOx = const.": setpoint for compressor inlet
TT.ATK.D18 TURB.EXHAUST, CORR. 15.6 K
temperature T.VI.12 (NG operation)
OTC setpoint decrease for "NOx = const.": setpoint for compressor inlet
TT.ATK.D19 TURB.EXHAUST, CORR. 12.7 K
temperature T.VI.13 (NG operation)
OTC setpoint decrease for "NOx = const.": setpoint for compressor inlet
TT.ATK.D20 TURB.EXHAUST, CORR. 8.8 K
temperature T.VI.14 (NG operation)
Limits and Settings
OTC setpoint decrease for "NOx = const.": setpoint for compressor inlet
List of Control Settings
0106E-X
3.1-0210-0592/55
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
OTC setpoint decrease for "NOx = const.": setpoint for compressor inlet
TT.ATK.D29 TURB.EXHAUST, CORR. 0K
temperature T.VI.23 (FO operation)
Siemens AG
TT.ATK.D30 TURB.EXHAUST, CORR. 100 K DIFFERENCE FOR TATK(OTC)-MONITORING TO U.VLE.21
TT.ATK.D31 TURB.EXHAUST, CORR. 50 K DIFFERENCE FOR TATK(OTC)-MONITORING FROM U.VLE.21
OTC setpoint decrease for IGV controller: setpoint for compressor inlet
TT.ATK.D32 TURB.EXHAUST, CORR. 2K
temperature T.VI.12 (NG operation)
OTC setpoint decrease for IGV controller: setpoint for compressor inlet
TT.ATK.D33 TURB.EXHAUST, CORR. 2K
temperature T.VI.13 (NG operation)
OTC setpoint decrease for IGV controller: setpoint for compressor inlet
TT.ATK.D34 TURB.EXHAUST, CORR. 4K
temperature T.VI.14 (NG operation)
OTC setpoint decrease for IGV controller: setpoint for compressor inlet
TT.ATK.D35 TURB.EXHAUST, CORR. 6K
temperature T.VI.15 (NG operation)
OTC setpoint decrease for IGV controller: setpoint for compressor inlet
TT.ATK.D36 TURB.EXHAUST, CORR. 8K
temperature T.VI.16 (NG operation)
OTC setpoint decrease for IGV controller: setpoint for compressor inlet
TT.ATK.D37 TURB.EXHAUST, CORR. 8K
MB
temperature T.VI.17 (NG operation)
OTC setpoint decrease for IGV controller: setpoint for compressor inlet
TT.ATK.D38 TURB.EXHAUST, CORR. 0K
temperature T.VI.18 (FO operation)
OTC setpoint decrease for IGV controller: setpoint for compressor inlet
TT.ATK.D39 TURB.EXHAUST, CORR. 0K
temperature T.VI.19 (FO operation)
OTC setpoint decrease for IGV controller: setpoint for compressor inlet
TT.ATK.D40 TURB.EXHAUST, CORR. 0K
temperature T.VI.20 (FO operation)
OTC setpoint decrease for IGV controller: setpoint for compressor inlet
TT.ATK.D41 TURB.EXHAUST, CORR. 0K
Limits and Settings
OTC setpoint decrease for IGV controller: setpoint for compressor inlet
TT.ATK.D42 TURB.EXHAUST, CORR. 0K
temperature T.VI.22 (FO operation)
OTC setpoint decrease for IGV controller: setpoint for compressor inlet
TT.ATK.D43 TURB.EXHAUST, CORR. 0K
temperature T.VI.23 (FO operation)
OTC setpoint decrease for TOTC controller per 1kg/s wet compression
TT.ATK.D44 TURB.EXHAUST, CORR. 0K
mass flow for Wet C switch off
TT.ATK.D45 TURB.EXHAUST, CORR. 6K maximum OTC increase for operating mode "overfiring"
TT.ATK.D46 TURB.EXHAUST, CORR. -700 --- OTC difference for factor U.EOH.03
TT.ATK.D47 TURB.EXHAUST, CORR. 0 --- OTC difference for factor U.EOH.04
TT.ATK.D48 TURB.EXHAUST, CORR. 9.9 --- OTC difference for factor U.EOH.05
0106E-X
3.1-0210-0592/56
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
Siemens AG
ATK AT BASE LOAD FOR TEMP. GOVERNOR AT COMBINED CYCLE
TT.ATK.EGGLK TURB.EXHAUST, CORR. 566 C
OPERATION with nat. Gas
ATK AT BASE LOAD FOR TEMP. GOVERNOR AT SIMPLE CYCLE
TT.ATK.HOEGL TURB.EXHAUST, CORR. 539 C
OPERATION with fuel oil
ATK AT BASE LOAD FOR TEMP. GOVERNOR AT COMBINED CYCLE
TT.ATK.HOEGLK TURB.EXHAUST, CORR. 541 C
OPERATION with fuel oil
for VX4.3A: ALARM, OTC high, for VX4.2: alarm, adjustment in accordance
TT.ATK.M07 TURB.EXHAUST, CORR. 626 -5 C
with 3.7-0162; hysteresis -6C
VX4.3A: trip, OTC too high, VX4.2: trip, adjustment in accordance with 3.7-
TT.ATK.S07 TURB.EXHAUST, CORR. 666 -5 C
0162; hysteresis -6C
TT.BRENNER.M01 TEMP.DIFFERENCE 100 -20 K BURNERTEMP.-COMP.DISCHARGE TEMP.: ALARM
BURNERTEMP.-COMP.DISCHARGE TEMP.: RAPID TRANSFER PM-
TT.BRENNER.U01 TEMP.DIFFERENCE 150 -70 K
>DM / GT-Trip
MB
TT.VOPO.01 constant 0.0072 C-1 Influence compressor inlet temperature on IGV pre-positioning
TT.VOPO.03 constant 0.000085 C-2 Influence compressor inlet temperature on IGV pre-positioning
Relationship of the relative change of fuel mass flow to change of exhaust
TT.VOPO.04 constant 0.00206 C-1
gas temperature with open IGV
TEMP. GRAD. WHEN CHANG. FROM BASE LOAD TO PEAK LOAD AND
TTK.ATK.01 TURB.EXHAUST, CORR. 11 K/min
VICE VERSA, VX4.yA approching to base load
TTK.ATK.02 TURB.EXHAUST, CORR. 30 K/min ALLOWED TEMP. GRAD. TO BASE LOAD
TTK.ATK.03 TURB.EXHAUST, CORR. 240 K/min TEMP. GRAD. FOR TT.ATK.D02-, D01-down
Limits and Settings
List of Control Settings
0106E-X
3.1-0210-0592/57
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
U.ATK.K18 factor -3e-2 1/C OTC calculation, coefficients for operating mode "no overfiring"
Siemens AG
OTC setpoint, delta coefficients for operating mode "overfiring", n >
U.ATK.K24 factor 212.5 C
U.ATK.03
OTC setpoint, delta coefficients for operating mode "overfiring", n >
U.ATK.K25 factor 2000 C
U.ATK.03
OTC setpoint, delta coefficients for operating mode "overfiring", n >
U.ATK.K26 factor 40 ---
U.ATK.03
OTC setpoint, delta coefficients for operating mode "overfiring", n >
U.ATK.K27 factor 400 ---
U.ATK.03
OTC setpoint, delta coefficients for operating mode "overfiring", n >
U.ATK.K28 factor -0.5 1/C
U.ATK.03
OTC setpoint, delta coefficients for operating mode "overfiring", n >
U.ATK.K34 factor 402.5 C
U.ATK.04
OTC setpoint, delta coefficients for operating mode "overfiring", n >
U.ATK.K35 factor -17000 C
U.ATK.04
OTC setpoint, delta coefficients for operating mode "overfiring", n >
MB
U.ATK.K36 factor 78 ---
U.ATK.04
OTC setpoint, delta coefficients for operating mode "overfiring", n >
U.ATK.K37 factor -3400 ---
U.ATK.04
OTC setpoint, delta coefficients for operating mode "overfiring", n >
U.ATK.K38 factor -0.5 1/C
U.ATK.04
OTC setpoint, delta coefficients for operating mode "overfiring", n <=
U.ATK.K44 factor 62.5 C
U.ATK.04
OTC setpoint, delta coefficients for operating mode "overfiring", n <=
Limits and Settings
U.ATK.K45 factor 0 C
List of Control Settings
U.ATK.04
OTC setpoint, delta coefficients for operating mode "overfiring", n <=
U.ATK.K46 factor 10 ---
U.ATK.04
OTC setpoint, delta coefficients for operating mode "overfiring", n <=
U.ATK.K47 factor 0 ---
U.ATK.04
OTC setpoint, delta coefficients for operating mode "overfiring", n <=
U.ATK.K48 factor -0.5 1/C
U.ATK.04
Characteristic for IGV pre-positioning: relative fuel mass flow for
U.BRENNST.03 REL. FUEL MASS FLOW 0%
compressor massflow = U.LSV.47
Characteristic for IGV pre-positioning: relative fuel mass flow for
U.BRENNST.04 REL. FUEL MASS FLOW 45 %
compressor massflow = U.LSV.48
0106E-X
3.1-0210-0592/58
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
Siemens AG
Characteristic for IGV pre-positioning: relative fuel mass flow for
U.BRENNST.08 REL. FUEL MASS FLOW 120 %
compressor massflow = U.LSV.52
U.BRENNST.09 REL. FUEL MASS FLOW -8.592 --- Polynomial coefficient for the computation of the relative GL fuel mass flow
U.BRENNST.10 REL. FUEL MASS FLOW 18.87 --- Polynomial coefficient for the computation of the relative GL fuel mass flow
U.BRENNST.11 REL. FUEL MASS FLOW -0.03554 1/C Polynomial coefficient for the computation of the relative GL fuel mass flow
U.BRENNST.12 REL. FUEL MASS FLOW -9.211 --- Polynomial coefficient for the computation of the relative GL fuel mass flow
U.BRENNST.13 REL. FUEL MASS FLOW 0.03081 1/C Polynomial coefficient for the computation of the relative GL fuel mass flow
U.BRENNST.14 REL. FUEL MASS FLOW -8.350E-06 1/C^2 Polynomial coefficient for the computation of the relative GL fuel mass flow
U.EGDB.01 NUMBER OF BURNER 24 --- number of NG-DM burner
U.EGVB.01 NUMBER OF BURNER 24 --- number of NG-PM burner
U.EMU.01 FACTOR 1 --- valve position correction at emulsified air condition
MB
U.EMU.02 FACTOR 1 --- valve position correction at emulsified air condition
U.EMU.03 FACTOR 1 --- valve position correction at emulsified air condition
U.EMU.04 FACTOR 1 --- valve position correction at emulsified air condition
U.EMU.05 FACTOR 1 --- valve position correction at emulsified air condition
U.EMU.06 FACTOR 1 --- valve position correction at emulsified air condition
U.EMU.07 FACTOR 1 --- valve position correction at emulsified air condition
U.EMU.08 FACTOR 1 --- valve position correction at emulsified air condition
Limits and Settings
List of Control Settings
0106E-X
3.1-0210-0592/59
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
Siemens AG
COMPRESSOR I.G.V POSITIONING BASE POINT 2, ISO compressor
U.LSV.02 FACTOR 70.5 %
massflow at U.VLE.02
COMPRESSOR I.G.V POSITIONING BASE POINT 3, ISO compressor
U.LSV.03 FACTOR 80 %
massflow at U.VLE.03
COMPRESSOR I.G.V POSITIONING BASE POINT 4, ISO compressor
U.LSV.04 FACTOR 87.5 %
massflow at U.VLE.04
COMPRESSOR I.G.V POSITIONING BASE POINT 5, ISO compressor
U.LSV.05 FACTOR 94.5 %
massflow at U.VLE.05
COMPRESSOR I.G.V POSITIONING BASE POINT 6, ISO compressor
U.LSV.06 FACTOR 100 %
massflow at U.VLE.06
max. compressor flow at reduced speed n* ST.PUMP.04 (without
U.LSV.07 COMPRESSOR FLOW 89.1 %
water/steam)
max. compressor flow at reduced speed n* ST.PUMP.05 (without
U.LSV.08 COMPRESSOR FLOW 92.5 %
water/steam)
MB
max. compressor flow at reduced speed n* ST.PUMP.06 (without
U.LSV.09 COMPRESSOR FLOW 94.8 %
water/steam)
max. compressor flow at reduced speed n* ST.PUMP.07 (without
U.LSV.10 COMPRESSOR FLOW 99.3 %
water/steam)
max. compressor flow at reduced speed n* ST.PUMP.08 (without
U.LSV.11 COMPRESSOR FLOW 100 %
water/steam)
max. compressor flow at reduced speed n* ST.PUMP.09 (without
U.LSV.12 COMPRESSOR FLOW 100 %
water/steam)
Limits and Settings
List of Control Settings
U.LSV.27 COMPRESSOR FLOW 88.7 % max. compressor flow at reduced speed n* ST.PUMP.24 (with water/steam)
U.LSV.28 COMPRESSOR FLOW 92.1 % max. compressor flow at reduced speed n* ST.PUMP.25 (with water/steam)
U.LSV.29 COMPRESSOR FLOW 93.5 % max. compressor flow at reduced speed n* ST.PUMP.26 (with water/steam)
U.LSV.30 COMPRESSOR FLOW 99.3 % max. compressor flow at reduced speed n* ST.PUMP.27 (with water/steam)
U.LSV.31 COMPRESSOR FLOW 100 % max. compressor flow at reduced speed n* ST.PUMP.28 (with water/steam)
U.LSV.32 COMPRESSOR FLOW 100 % max. compressor flow at reduced speed n* ST.PUMP.29 (with water/steam)
Characteristic for IGV pre-positioning: compressor mass flow for relative
U.LSV.47 COMPRESSOR FLOW 55 %
fuel mass flow = U.BRENNST.03
Characteristic for IGV pre-positioning: compressor mass flow for relative
U.LSV.48 COMPRESSOR FLOW 55 %
fuel mass flow = U.BRENNST.04
0106E-X
3.1-0210-0592/60
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
Siemens AG
Characteristic for IGV pre-positioning: compressor mass flow for relative
U.LSV.52 COMPRESSOR FLOW 116 %
fuel mass flow = U.BRENNST.08
U.PILOT.02 NUMBER OF BURNER 24 --- number of pilot gas burner
U.PRAL.01 FACTOR 1 --- KP PRAL-CONTROLLER FUEL VALVES
U.PRAL.02 FACTOR 10 --- KD PRAL-CONTROLLER FUEL VALVES
U.PRAL.03 FACTOR 1 --- KP PRAL-CONTROLLER COMPR. I.G.V. CONTROLER
U.PRAL.05 FACTOR 1% KV PRAL-CONTROLLER COMPR. I.G.V. CONTROLER
U.PRAL.06 FACTOR 5% LIMIT PRAL-CONTROL DEVIATION
U.PRAL.07 FACTOR 0.1 --- diff. gain neg. portion
U.PRAL.08 FACTOR 20 --- diff. gain pos. portion
U.PRAL.09 FACTOR 0.2 --- Kp2 pral-Regler fuel-valves
MB
U.PRAL.11 dead band 1% dead band of differential part (+/-)
U.PRAL.12 factor 3.9 --- factor, pral-controller
U.PRAL.13 constant 0.9 --- constant, pral-controller
U.PRAL.14 constant 5.5224 --- Cooling air limit controller, limit without ejector pumps
U.PRAL.15 constant -11.2582 --- Cooling air limit controller, limit without ejector pumps
U.PRAL.16 constant 5.5706 --- Cooling air limit controller, limit without ejector pumps
U.PRAL.17 constant -1.3877 --- Cooling air limit controller, limit without ejector pumps
Limits and Settings
List of Control Settings
U.PRAL.18 constant 2.447 --- Cooling air limit controller, limit without ejector pumps
U.PRAL.19 constant 0.3741 --- Cooling air limit controller, limit without ejector pumps
U.PRAL.20 constant 5.5224 --- Cooling air limit controller, limit with ejector pumps
U.PRAL.21 constant -11.2582 --- Cooling air limit controller, limit with ejector pumps
U.PRAL.22 constant 5.5706 --- Cooling air limit controller, limit with ejector pumps
U.PRAL.23 constant -1.3877 --- Cooling air limit controller, limit with ejector pumps
U.PRAL.24 constant 2.447 --- Cooling air limit controller, limit with ejector pumps
U.PRAL.25 constant 0.3741 --- Cooling air limit controller, limit with ejector pumps
U.PRAL.26 constant 3% Cooling air limit controller, Offset for fuel control valve
0106E-X
3.1-0210-0592/61
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
Siemens AG
U.REGLER.02 PROPORTIONAL GAIN 0.01 --- LOAD-/SPEED CONTROLLER PROPORTIONAL COEFFICIENT
U.REGLER.07 GAIN FACTOR 10 --- POSITION CONTROL LOOP AMPLIFICATION GAIN
U.REGLER.08 GAIN FACTOR 10 --- POSITION CONTROL LOOP AMPLIFICATION GAIN
U.REGLER.09 GAIN FACTOR 10 --- POSITION CONTROL LOOP AMPLIFICATION GAIN, FO
U.REGLER.13 CONTROL DEVIATION 1.5 +0.1 % CRITERION; SMALL CONTROLL DEVIATION
U.REGLER.28 GAIN FACTOR 10 --- POSITION CONTROL LOOP AMPLIFICATION GAIN, NG
Limit integral long-time
U.REGLER.31 10 % Limit integral long-time correction
correction
U.REGLER.32 PROPORTIONAL GAIN 0.01 --- LOAD LIMIT CONTROLLER PROPORTIONAL COEFFICIENT
U.RLTNK.01 Volume return line tank 14950 -200 l remaining volume, return line tank, drainage pump protection off
U.RLTNK.02 Volume return line tank 13700 +100 l remaining volume, switch on / off return tank drainage pump
MB
U.RLTNK.03 Volume return line tank 8000 +500 l remaining volume, return line tank, no release for one fuel oil start
U.RLTNK.04 Volume return line tank 6000 +500 l remaining volume, return line tank, no release for one fuel change over
U.RLTNK.05 Volume return line tank 200 +500 l remaining volume, return line tank, fuel oil trip
Correction factor for the relative fuel mass flow during purging the fuel oil
U.SPUDB.01 Corection factor purging 1 ---
line
U.VLE.01 FACTOR 0% COMPRESSOR I.G.V BASE POINT 1, IGV position at U.LSV.01
U.VLE.02 FACTOR 20 % COMPRESSOR I.G.V BASE POINT 2, IGV position at U.LSV.02
Limits and Settings
0106E-X
3.1-0210-0592/62
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
U.VLE.18 IGV-position -1 -2 %
Power Generation
up with natural gas
Technical Data
U.VLE.19 IGV-position -1.5 -0.5 % minimum Position for natural gas operation (lower limit)
Siemens AG
U.VLE.20 IGV-position 1.5 +0.5 % minimum Position for natural gas operation (upper limit)
U.VLE.21 IGV-position >50 % Limit switch over of OTC-TC monitoring TT.ATK.30/31
U.VLE.22 IGV-position 0% Start-up position of compressor inlet guide vanes for fuel gas operation
U.VLE.23 IGV-position 0% Start-up position of compressor inlet guide vanes for fuel oil operation
Limit for change of max. frequency gradient (closing IGVs):
U.VLE.24 IGV-position 30 %
VLGMIN+U.VLE.24
Limit for stop of frequency gradient (IGVs in closed position);
U.VLE.25 IGV-position 24 %
VLGMIN+U.VLE.25
Limit for change of max. frequency gradient (IGVs open); VLOGNS-
U.VLE.26 IGV-position 10 %
U.VLE.26
TRANSFER FROM DIFFUSION- TO PREMIX-BURNER (FO-OPERATION)
U.VLE.27 IGV-position 18 -1 %
FOR GT WITH TURN DOWN
TRANSFER FROM PREMIX- TO DIFFUSION-BURNER (FO-OPERATION)
MB
U.VLE.28 IGV-position 13 +1 %
FOR GT WITH TURN DOWN
Influence of OTC setpoint decrease for "NOx = const." on IGV
U.VOPO.07 FACTOR 1.18 ---
prepositioning
Y.EMOTOR.01 BEARING VIBRATION MOT. 60 -5 dB sv shaft vibration FO-injectionpump motor
Y.LAGER.01 BEARING VIBRATION 0.3 +0.2 mm/s LIMIT FOR MONITORING
Y.LAGER.02 BEARING VIBRATION 1.0 -0.1 mm/s LIMIT FOR MONITORING
Y.LAGER.M BEARING VIBRATION 9.3 -0.5 mm/s ALARM "BEARING VIBR. ALARM"
Limits and Settings
List of Control Settings
Y.LAGER.S BEARING VIBRATION 14.7 -0.5 mm/s TRIP AND ALARM "BEARING VIBR. TRIP"
Y.PUMPE.01 BEARING VIBRATION FO PMP 60 -5 dB sv shaft vibration FO-injection pump
0106E-X
3.1-0210-0592/63
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
Siemens AG
MBA10CG102-U01 Shaftposition thrust AMPL 3.1-1010 GIA+-S+-Z+ DIRECT
MBA10CS101 Turbine Speed SSE 3.1-1010 [0.5-25000Hz] [0.5-25000Hz] SA+S+Z+ MBY40GF001A
MBA10CS102 Turbine Speed SSE 3.1-1010 [0.5-25000Hz] [0.5-25000Hz] SA+S+Z+ MBY40GF001A
MBA10CS103 Turbine Speed SSE 3.1-1010 [0.5-25000Hz] [0.5-25000Hz] SA+S+Z+ MBY40GF001A
MBA10CS104 Turbine Speed SSE 3.1-1010 [0.5-25000Hz] [0.5-25000Hz] SA+S+Z+ MBY40GF001A
MBA10CS105 Turbine Speed SSE 3.1-1010 [0.5-25000Hz] [0.5-25000Hz] SA+S+Z+ MBY40GF001A
MBA10CS106 Turbine Speed SSE 3.1-1010 [0.5-25000Hz] [0.5-25000Hz] SA+S+Z+ MBY40GF001A
MBA10CY101-B01 Rotary Shaft Position VSE 3.1-1010 [0.4-4.4mm] [0.4-4.4mm] GR MBA10CY101-U01
MBA10CY101-U01 Rotary Shaft Position AMPL 3.1-1010 GR DIRECT
MBA11AS001-S11 Adjustment PRSW 3.1-1010 [-] GS MBY21GF001
MBA11AS001-S21 Adjustment PRSW 3.1-1010 [-] GS MBY21GF001
MBA11CG101 Adjustment POSE 3.1-1010 [0-50Grad] [0-50Grad] GIC MBY38GF001
MB
MBA11CP001 Pressure Difference DPSW 3.1-1010 [2-700mbar] < 30 +10 mbar PDA-S-Z- MBY37GF001A
MBA11CP002 Pressure Difference DPSW 3.1-1010 [2-700mbar] < 30 +10 mbar PDA-S-Z- MBY37GF001A
MBA11CP003 Pressure Difference DPSW 3.1-1010 [2-700mbar] < 30 +10 mbar PDA-S-Z- MBY37GF001A
[700-1100mbar
MBA11CP101 Compr Inlet Press PSEI 3.1-1010 [0-1300mbar abs] abs] PCIRS+- MBY37GF001A
MBA11CT101A Inlet Temperature RTD2 3.1-1010 [0-400C] [0-400C] TICS+-Z- MBY38GF001
MBA11CT101B Inlet Temperature RTD2 3.1-1010 [0-400C] [0-400C] TICS+-Z- MBY38GF001
Limits and Settings
0106E-X
3.1-0220-0592/1
MBA12CT101B Outlet Temperature TC2 3.1-1010 [0-650C] [0-650C] TICS+ MBY39GF001B
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
Siemens AG
MBA22AA002-S21 Fuel Oil Drain Valve PRSW 3.1-1210 [-] GS MBY19GF001
MBA26CT101A Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001A
MBA26CT101B Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001A
MBA26CT101C Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001A
MBA26CT102A Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001A
MBA26CT102B Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001A
MBA26CT102C Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001A
MBA26CT103A Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001A
MBA26CT103B Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001A
MBA26CT103C Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001A
MBA26CT104A Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001A
MB
MBA26CT104B Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001A
MBA26CT104C Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001A
MBA26CT105A Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001A
MBA26CT105B Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001A
MBA26CT105C Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001A
MBA26CT106A Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001A
Limits and Settings
MBA26CT106B Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001A
MBA26CT106C Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001A
MBA26CT107A Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001B
List of Measuring Instruments
MBA26CT107B Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001B
MBA26CT107C Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001B
MBA26CT108A Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001B
MBA26CT108B Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001B
MBA26CT108C Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001B
MBA26CT109A Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001B
MBA26CT109B Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001B
0106E-X
3.1-0220-0592/2
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
MBA26CT110C Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001B
MBA26CT111A Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001B
Siemens AG
MBA26CT111B Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001B
MBA26CT111C Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001B
MBA26CT112A Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001B
MBA26CT112B Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001B
MBA26CT112C Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001B
MBA26CT113A Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001C
MBA26CT113B Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001C
MBA26CT113C Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001C
MBA26CT114A Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001C
MBA26CT114B Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001C
MBA26CT114C Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001C
MB
MBA26CT115A Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001C
MBA26CT115B Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001C
MBA26CT115C Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001C
MBA26CT116A Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001C
MBA26CT116B Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001C
MBA26CT116C Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001C
Limits and Settings
MBA26CT117A Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001C
MBA26CT117B Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001C
MBA26CT117C Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001C
List of Measuring Instruments
MBA26CT118A Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001C
MBA26CT118B Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001C
MBA26CT118C Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001C
MBA26CT119A Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001D
MBA26CT119B Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001D
MBA26CT119C Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001D
MBA26CT120A Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001D
0106E-X
3.1-0220-0592/3
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
MBA26CT121B Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001D
MBA26CT121C Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001D
Siemens AG
MBA26CT122A Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001D
MBA26CT122B Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001D
MBA26CT122C Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001D
MBA26CT123A Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001D
MBA26CT123B Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001D
MBA26CT123C Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001D
MBA26CT124A Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001D
MBA26CT124B Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001D
MBA26CT124C Exhaust Gas Temp TC3 3.1-1010 [0-800C] [0-800C] TICSA+Z+ MBY02GF001D
MBA41AA051-S11 Blow-off Valve POSW 3.1-1410 [-] GS MBY39GF001A
MBA41AA051-S12 Blow-off Valve POSW 3.1-1410 [-] GS MBY39GF001A
MB
MBA41AA051-S21 Blow-off Valve POSW 3.1-1410 [-] GS MBY39GF001A
MBA41AA051-S22 Blow-off Valve POSW 3.1-1410 [-] GS MBY39GF001A
MBA42AA051-S11 Blow-off Valve POSW 3.1-1410 [-] GS MBY39GF001A
MBA42AA051-S12 Blow-off Valve POSW 3.1-1410 [-] GS MBY39GF001A
MBA42AA051-S21 Blow-off Valve POSW 3.1-1410 [-] GS MBY39GF001A
MBA42AA051-S22 Blow-off Valve POSW 3.1-1410 [-] GS MBY39GF001A
Limits and Settings
0106E-X
3.1-0220-0592/4
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
Siemens AG
MBA51CP104 Pressure HCO-pump 2 PSW 3.1-1510 bar > 110 - bar PA-S- MBY15GF030
MBA51CP401 Pressure Gauge P 3.1-1510 [] P n.a.
MBA51CP501 System-pressure HCO PI 3.1-1510 [0-400bar] [0-400bar] PI n.a.
MBA51CP502 Pressure Gauge P 3.1-1510 [] PI n.a.
MBA51CP503 Pressure Gauge P 3.1-1510 [] PI n.a.
MBA51CP504 Pressure Gauge P 3.1-1510 [] PI n.a.
MBA51CT101 Temperature P 3.1-1510 [] TA+ MBY15GF030
MBA51CT501 Temperature P 3.1-1510 [] TI n.a.
MBA53AA001-S11 Transfer Valve POSW 3.1-1510 - MBY15GF030
MBA53AA001-S21 Transfer Valve POSW 3.1-1510 - MBY15GF030
MBA53AA002-S11 Transfer Valve POSW 3.1-1510 - MBY15GF030
MB
MBA53AA002-S21 Transfer Valve POSW 3.1-1510 - MBY15GF030
MBA53AA003-S11 Transfer Valve POSW 3.1-1510 - MBY15GF030
MBA53AA003-S21 Transfer Valve POSW 3.1-1510 - MBY15GF030
MBA53AA004-S11 Transfer Valve POSW 3.1-1510 - MBY15GF030
MBA53AA004-S21 Transfer Valve POSW 3.1-1510 - MBY15GF030
MBA53AA005-S11 Transfer Valve POSW 3.1-1510 - MBY15GF030
Limits and Settings
MBA53CP102 Pressure HSO MT-RL PSE 3.1-1510 [0-250bar] [0-250bar] PIA+-S+-Z+ MBY15GF030
MBA53CP103 Pressure HSO AT-RL PSE 3.1-1510 [0-200bar] [0-200bar] PIA+-S+-Z+ MBY15GF030
MBA53CP104 Pressure HSO AT-RL PSE 3.1-1510 [0-250bar] [0-250bar] PIA+-S+-Z+ MBY15GF030
MBD11CT101A Bearing Temperatur TC3 3.1-1010 [0-200C] [0-200C] TA+Z+ MBY18GF001
MBD11CT101B Bearing Temperatur TC3 3.1-1010 [0-200C] [0-200C] TA+Z+ MBY18GF001
MBD11CT101C Bearing Temperatur TC3 3.1-1010 [0-200C] [0-200C] TA+Z+ MBY18GF001
MBD11CT102A Bearing Temperatur TC3 3.1-1010 [0-200C] [0-200C] TA+Z+ MBY18GF001
0106E-X
3.1-0220-0592/5
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
Siemens AG
MBD11CY102-U01 Casing Vibration AMPL 3.1-1010 SIA+Z+ DIRECT
MBD11CY111-B01 Shaft Vibration VSE 3.1-1010 [0.4-4.4mm] [0.4-4.4mm] SR MBD11CY111-U01
MBD11CY111-U01 Shaft Vibration AMPL 3.1-1010 SR DIRECT
MBD11CY112-B01 Shaft Vibration VSE 3.1-1010 [0.4-4.4mm] [0.4-4.4mm] SR MBD11CY112-U01
MBD11CY112-U01 Shaft Vibration AMPL 3.1-1010 SR DIRECT
MBD12CT101A Bearing Temperatur TC3 3.1-1010 [0-200C] [0-200C] TA+Z+ MBY40GF001B
MBD12CT101B Bearing Temperatur TC3 3.1-1010 [0-200C] [0-200C] TA+Z+ MBY40GF001B
MBD12CT101C Bearing Temperatur TC3 3.1-1010 [0-200C] [0-200C] TA+Z+ MBY40GF001B
MBD12CT102A Bearing Temperatur TC2 3.1-1010 [0-200C] [0-200C] TA+Z+ MBY40GF001B
MBD12CT102B Bearing Temperatur TC2 3.1-1010 [0-200C] [0-200C] TA+Z+ MBY40GF001B
MBD12CT103A Bearing Temperatur TC2 3.1-1010 [0-200C] [0-200C] TA+Z+ MBY40GF001B
MB
MBD12CT103B Bearing Temperatur TC2 3.1-1010 [0-200C] [0-200C] TA+Z+ MBY40GF001B
MBD12CT104A Bearing Temperatur TC2 3.1-1010 [0-200C] [0-200C] TA+Z+ MBY40GF001B
MBD12CT104B Bearing Temperatur TC2 3.1-1010 [0-200C] [0-200C] TA+Z+ MBY40GF001B
MBD12CT105A Bearing Temperatur TC2 3.1-1010 [0-200C] [0-200C] TA+Z+ MBY40GF001B
MBD12CT105B Bearing Temperatur TC2 3.1-1010 [0-200C] [0-200C] TA+Z+ MBY40GF001B
MBD12CT106A Bearing Temperatur TC3 3.1-1010 [0-200C] [0-200C] TI MBY40GF001
Limits and Settings
0106E-X
3.1-0220-0592/6
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
Siemens AG
MBD12CY111-U01 Shaft Vibration AMPL 3.1-1010 SR DIRECT
MBD12CY112-B01 Shaft Vibration VSE 3.1-1010 [0.4-4.4mm] [0.4-4.4mm] SR MBD12CY112-U01
MBD12CY112-U01 Shaft Vibration AMPL 3.1-1010 SR DIRECT
MBH22AA101-B01 Control Flap POSE 3.1-2010 [0-90Grad] [16-80Grad] GC DIRECT
MBH22AA101-S11 Control Flap POSW 3.1-2010 [-] GS DIRECT
MBH22AA101-S21 Control Flap POSW 3.1-2010 [-] GS DIRECT
MBH22AA101-S81 Control Flap FOSW 3.1-2010 [30-60Nm] > 55 - Nm WS+A+ DIRECT
MBH22AA101-S91 Control Flap FOSW 3.1-2010 [30-60Nm] > 55 - Nm WS+A+ DIRECT
MBH22AA102-B01 Control Flap POSE 3.1-2010 [0-90Grad] [16-80Grad] GC DIRECT
MBH22AA102-S11 Control Flap POSW 3.1-2010 [-] GS DIRECT
MBH22AA102-S21 Control Flap POSW 3.1-2010 [-] GS DIRECT
MB
MBH22AA102-S81 Control Flap FOSW 3.1-2010 [30-60Nm] > 55 - Nm WS+A+ DIRECT
MBH22AA102-S91 Control Flap FOSW 3.1-2010 [30-60Nm] > 55 - Nm WS+A+ DIRECT
[0-25000mbar
MBH22CP102 Cooling Air Pressure PSE 3.1-2010 [0-30000mbar abs] abs] PAC MBY20GF001
[0-25000mbar
MBH22CP103 Cooling Air Pressure PSE 3.1-2010 [0-30000mbar abs] abs] PAC MBY20GF001
MBH23AA101-B01 Control Flap POSE 3.1-2010 [0-90Grad] [16-80Grad] GC DIRECT
Limits and Settings
0106E-X
3.1-0220-0592/7
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
Siemens AG
MBH40CT101A Seal Air Temperature RTD2 3.1-2210 [0-600C] [0-600C] TA+-S+Z+ MBY02GF001E
MBH40CT101B Seal Air Temperature RTD2 3.1-2210 [0-600C] [0-600C] TA+-S+Z+ MBY02GF001E
MBH40CT102A Seal Air Temperature RTD2 3.1-2210 [0-600C] [0-600C] TA+-S+Z+ MBY02GF001E
MBH40CT102B Seal Air Temperature RTD2 3.1-2210 [0-600C] [0-600C] TA+-S+Z+ MBY02GF001E
MBH40CT103A Seal Air Temperature RTD2 3.1-2210 [0-600C] [0-600C] TA+-S+Z+ MBY02GF001E
MBH40CT103B Seal Air Temperature RTD2 3.1-2210 [0-600C] [0-600C] TA+-S+Z+ MBY02GF001E
MBH40CT404 Seal Air Temperature T 3.1-2210 [0-600] [0-600C] T n.a.
MBK21AU001-S11 Swinging Tool PRSW 3.1-8010 [-] GASZ MBY45GF001
MBK21AU001-S21 Swinging Tool PRSW 3.1-8010 [-] GASZ MBY45GF001
MBK21AU001-S22 Swinging Tool PRSW 3.1-8010 [-] GASZ MBY45GF001
MBK21AU001-S23 Swinging Tool PRSW 3.1-8010 [-] GASZ MBY45GF001
MB
MBK22CS101 Speed SSE 3.1-8010 [0.5-25000Hz] [0.5-25000Hz] SSI MBY45GF001
MBK22CS102 Speed SSE 3.1-8010 [0.5-25000Hz] [0.5-25000Hz] SSI MBY45GF001
MBM10CP101 Pressure Difference DPSE 3.1-3010 [0-1600mbar] [16-1200mbar] PDIA MBY20GF001
MBM10CY101-B01 CC Acceleration VSE 3.1-3010 [0-200g] [0-10g] GA+S+ MBM10CY101-U01
MBM10CY101-U01 CC Acceleration AMPL 3.1-3010 GA+S+ DIRECT
MBM10CY102-B01 CC Acceleration VSE 3.1-3010 [0-200g] [0-10g] GA+S+ MBM10CY102-U01
MBM10CY102-U01 CC Acceleration AMPL 3.1-3010 GA+S+ DIRECT
Limits and Settings
0106E-X
3.1-0220-0592/8
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
Siemens AG
MBM12CT108 Burner Temperature TC1 3.1-3010 [-200-1000C] [-200-1000C] TDA+S+- MBY06GF001
MBM12CT109 Burner Temperature TC1 3.1-3010 [-200-1000C] [-200-1000C] TDA+S+- MBY06GF001
MBM12CT110 Burner Temperature TC1 3.1-3010 [-200-1000C] [-200-1000C] TDA+S+- MBY06GF001
MBM12CT111 Burner Temperature TC1 3.1-3010 [-200-1000C] [-200-1000C] TDA+S+- MBY06GF001
MBM12CT112 Burner Temperature TC1 3.1-3010 [-200-1000C] [-200-1000C] TDA+S+- MBY06GF001
MBM12CT113 Burner Temperature TC1 3.1-3010 [-200-1000C] [-200-1000C] TDA+S+- MBY06GF001
MBM12CT114 Burner Temperature TC1 3.1-3010 [-200-1000C] [-200-1000C] TDA+S+- MBY06GF001
MBM12CT115 Burner Temperature TC1 3.1-3010 [-200-1000C] [-200-1000C] TDA+S+- MBY06GF001
MBM12CT116 Burner Temperature TC1 3.1-3010 [-200-1000C] [-200-1000C] TDA+S+- MBY06GF001
MBM12CT117 Burner Temperature TC1 3.1-3010 [-200-1000C] [-200-1000C] TDA+S+- MBY06GF001
MBM12CT118 Burner Temperature TC1 3.1-3010 [-200-1000C] [-200-1000C] TDA+S+- MBY06GF001
MB
MBM12CT119 Burner Temperature TC1 3.1-3010 [-200-1000C] [-200-1000C] TDA+S+- MBY05GF001
MBM12CT120 Burner Temperature TC1 3.1-3010 [-200-1000C] [-200-1000C] TDA+S+- MBY05GF001
MBM12CT121 Burner Temperature TC1 3.1-3010 [-200-1000C] [-200-1000C] TDA+S+- MBY05GF001
MBM12CT122 Burner Temperature TC1 3.1-3010 [-200-1000C] [-200-1000C] TDA+S+- MBY05GF001
MBM12CT123 Burner Temperature TC1 3.1-3010 [-200-1000C] [-200-1000C] TDA+S+- MBY05GF001
MBM12CT124 Burner Temperature TC1 3.1-3010 [-200-1000C] [-200-1000C] TDA+S+- MBY05GF001
Limits and Settings
0106E-X
3.1-0220-0592/9
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
Siemens AG
MBM12CT166 Burner Temperature TC1 3.1-3010 [-200-1000C] [-200-1000C] TDA+S+- MBY06GF001
MBM12CT167 Burner Temperature TC1 3.1-3010 [-200-1000C] [-200-1000C] TDA+S+- MBY06GF001
MBM12CT168 Burner Temperature TC1 3.1-3010 [-200-1000C] [-200-1000C] TDA+S+- MBY06GF001
MBM12CT169 Burner Temperature TC1 3.1-3010 [-200-1000C] [-200-1000C] TDA+S+- MBY05GF001
MBM12CT170 Burner Temperature TC1 3.1-3010 [-200-1000C] [-200-1000C] TDA+S+- MBY05GF001
MBM12CT171 Burner Temperature TC1 3.1-3010 [-200-1000C] [-200-1000C] TDA+S+- MBY05GF001
MBM12CT172 Burner Temperature TC1 3.1-3010 [-200-1000C] [-200-1000C] TDA+S+- MBY05GF001
MBM12CT173 Burner Temperature TC1 3.1-3010 [-200-1000C] [-200-1000C] TDA+S+- MBY05GF001
MBM12CT174 Burner Temperature TC1 3.1-3010 [-200-1000C] [-200-1000C] TDA+S+- MBY05GF001
MBM13CR101-B02 Flame Detector FLDT 3.1-3010 [350-2700nm] RA-Z- MBM13CR101-U01
MBM13CR101-B03 Flame Detector FLDT 3.1-3010 [350-2700nm] RA-Z- MBM13CR101-U02
MB
MBM13CR101QB01 Flame Detector FLSE 3.1-3010 [430-2400Nm] [430-2400Nm] RA-Z- -----
MBM13CR101-S01 Flame Detector FLDT 3.1-3010 [-] RA-Z- DIRECT
MBM13CR101-S03 Flame Detector FLDT 3.1-3010 [-] RA-Z- DIRECT
MBM13CR101-U01 Flame Detector AMPL 3.1-3010 RA-Z- DIRECT
MBM13CR101-U02 Flame Detector AMPL 3.1-3010 RA-Z- DIRECT
MBM13CR102-B02 Flame Detector FLDT 3.1-3010 [350-2700nm] RA-Z- MBM13CR102-U01
Limits and Settings
0106E-X
3.1-0220-0592/10
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
Siemens AG
MBN12AP001-B02 Fuel Oil Injection Pump RTD1 3.1-4010 [0-200-] [0-200-] TS+ DIRECT
MBN12AP001-B03 Fuel Oil Injection Pump RTD1 3.1-4010 [0-200-] [0-200-] TS+ DIRECT
MBN12AP001-B04 Fuel Oil Injection Pump RTD1 3.1-4010 [0-200-] [0-200-] TS+ DIRECT
MBN12AP001-B05 Fuel Oil Injection Pump RTD1 3.1-4010 [0-200-] [0-200-] TS+ DIRECT
MBN12AP001-B06 Fuel Oil Injection Pump RTD1 3.1-4010 [0-200-] [0-200-] TS+ DIRECT
MBN12AP002-B01 Fuel Oil Injection Pump RTD1 3.1-4010 [0-200-] [0-200-] TS+ DIRECT
MBN12AP002-B02 Fuel Oil Injection Pump RTD1 3.1-4010 [0-200-] [0-200-] TS+ DIRECT
MBN12AP002-B03 Fuel Oil Injection Pump RTD1 3.1-4010 [0-200-] [0-200-] TS+ DIRECT
MBN12AP002-B04 Fuel Oil Injection Pump RTD1 3.1-4010 [0-200-] [0-200-] TS+ DIRECT
MBN12AP002-B05 Fuel Oil Injection Pump RTD1 3.1-4010 [0-200-] [0-200-] TS+ DIRECT
MBN12AP002-B06 Fuel Oil Injection Pump RTD1 3.1-4010 [0-200-] [0-200-] TS+ DIRECT
MB
MBN12CF001-B01 Flow FSE 3.1-4010 [3-300cm/s] [3-300cm/s] FAS- MBY07GF001
MBN12CP101 Fuel Oil Inlet Pressure PSE 3.1-4010 [0-16bar] [0-16bar] PS+-ZA- MBY07GF001
MBN12CP102 Fuel Oil Inlet Pressure PSE 3.1-4010 [0-16bar] [0-16bar] PS+-ZA- MBY07GF001
MBN12CP103 Fuel Oil Inlet Pressure PSE 3.1-4010 [0-16bar] [0-16bar] PS+-ZA- MBY07GF001
MBN12CP501 Fuel Oil Pressure PI 3.1-4010 [0-10bar] [0-10bar] PI n.a.
MBN12CP502 Fuel Oil Pressure PI 3.1-4010 [0-160bar] [0-160bar] PI n.a.
Limits and Settings
0106E-X
3.1-0220-0592/11
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
Siemens AG
MBN12CT118A Bearing Temperatur RTD2 3.1-4010 [0-200C] [0-200C] TIASZ+ DIRECT
MBN12CT118B Bearing Temperatur RTD2 3.1-4010 [0-200C] [0-200C] TIASZ+ DIRECT
MBN13CP101 Discharge Pressure PSE 3.1-4010 [0-160bar] [0-160bar] PS+-ZA- MBY07GF001
MBN13CP102 Discharge Pressure PSE 3.1-4010 [0-160bar] [0-160bar] PS+-ZA- MBY07GF001
MBN13CP103 Discharge Pressure PSE 3.1-4010 [0-160bar] [0-160bar] PS+-ZA- MBY07GF001
MBN14AA051-S11 FO Diffusion ESV PRSW 3.1-4010 [-] GSZ MBY08GF001
MBN14AA051-S12 FO Diffusion ESV PRSW 3.1-4010 [-] GSZ MBY08GF001
MBN14AA051-S21 FO Diffusion ESV PRSW 3.1-4010 [-] GSZ MBY08GF001
MBN14AA051-S22 FO Diffusion ESV PRSW 3.1-4010 [-] GSZ MBY08GF001
MBN14AA151-B01 FO Diffusion CV POSE 3.1-4010 [0-75mm] [0-75mm] GCZ MBY08GF001
MBN14AA151-B02 FO Diffusion CV POSE 3.1-4010 [0-75mm] [0-75mm] GCZ MBY08GF001
MB
MBN14AA151-B03 FO Diffusion CV POSE 3.1-4010 [0-75mm] [0-75mm] GCZ MBY08GF001
MBN14AA501-S21 Shut-off Valve PRSW 3.1-4010 [-] GS MBY08GF001
MBN14AA501-S22 Shut-off Valve PRSW 3.1-4010 [-] GS MBY08GF001
MBN14CP101 Feed Line Pressure PSEI 3.1-4010 [0-160bar] [0-160bar] PZA- MBY07GF001
MBN14CP103 Fuel Oil Pressure PSEI 3.1-4010 [0-276bar] [0-276bar] PZA- MBY07GF001
MBN17CF101-B01 Feed Line Flow FSE 3.1-4010 [100-2000l/min] [100-2000l/min] FYI MBN17CF101-U01
Limits and Settings
0106E-X
3.1-0220-0592/12
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
MBN23CP101 Fuel Oil Pressure PSEI 3.1-4010 [0-160bar] [0-160bar] PSA- MBY07GF001
MBN23CP102 Fuel Oil Pressure PSEI 3.1-4010 [0-276bar] [0-276bar] PSA- MBY07GF001
Siemens AG
MBN25CF101-B01 Premix Flow FSE 3.1-4010 [100-2000l/min] [100-2000l/min] FYI MBN25CF101-U01
MBN25CF101-U01 Premix Flow AMPL 3.1-4010 FYI MBY07GF001
MBN25CT101A Premix Temperature RTD2 3.1-4010 [0-150C] [0-150C] TYI MBY07GF001
MBN25CT101B Premix Temperature RTD2 3.1-4010 [0-150C] [0-150C] TYI MBY07GF001
MBN25CT501 Temperature TI 3.1-4010 Grad C [Grad C] TI n.a.
MBN31CP101 Fuel Oil Pressure DPSEI 3.1-4010 [0-5000mbar] [0-3000mbar] PDS+ MBY11GF002A
MBN34AA002-S11 Leakoil Valve PRSW 3.1-4010 [-] GS MBY07GF001
MBN34AA002-S12 Leakoil Valve PRSW 3.1-4010 [-] GS MBY07GF001
MBN34AA002-S13 Leakoil Valve PRSW 3.1-4010 [-] GS MBY07GF001
MBN34AA051-S11 Seal Air Ball Cock POSW 3.1-4010 [-] GS MBY39GF001C
MBN34AA051-S12 Seal Air Ball Cock POSW 3.1-4010 [-] GS MBY39GF001C
MB
MBN34AA051-S13 Seal Air Ball Cock POSW 3.1-4010 [-] GS MBY39GF001C
MBN34AA051-S21 Seal Air Ball Cock POSW 3.1-4010 [-] GS MBY39GF001C
MBN34AA051-S22 Seal Air Ball Cock POSW 3.1-4010 [-] GS MBY39GF001C
MBN34AA051-S23 Seal Air Ball Cock POSW 3.1-4010 [-] GS MBY39GF001C
MBN34CF501 Flow FI 3.1-4010 [-] [0-0-] FI n.a.
MBN34CP001 Leakoil Pressure PSW 3.1-4010 [1-25bar] > 1.5 -0.5 bar PA+Z+ MBY39GF001D
Limits and Settings
MBN34CP002 Leakoil Pressure PSW 3.1-4010 [1-25bar] > 1.5 -0.5 bar PA+Z+ MBY39GF001D
MBN34CP003 Leakoil Pressure PSW 3.1-4010 [1-25bar] > 1.5 -0.5 bar PA+Z+ MBY39GF001D
MBN34CP101 Fuel Oil Pressure PSE 3.1-4010 *[0-160bar] [0-160bar] P n.a.
List of Measuring Instruments
0106E-X
3.1-0220-0592/13
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
Siemens AG
MBN44CP001 Leakoil Pressure PSW 3.1-4010 [1-25bar] > 1.5 -0.5 bar PA+Z+ MBY39GF001D
MBN44CP002 Leakoil Pressure PSW 3.1-4010 [1-25bar] > 1.5 -0.5 bar PA+Z+ MBY39GF001D
MBN44CP003 Leakoil Pressure PSW 3.1-4010 [1-25bar] > 1.5 -0.5 bar PA+Z+ MBY39GF001D
MBN44CP101 Fuel Oil Pressure PSE 3.1-4010 *[0-160bar] [0-160bar] P n.a.
MBN45AA401-S11 Fuel Oil Drain POSW 3.1-4010 [-] MBY07GF001
MBN45AA401-S21 Fuel Oil Drain POSW 3.1-4010 [-] GS MBY07GF001
MBN45AA402-S11 Fuel Oil Drain POSW 3.1-4010 [-] MBY07GF001
MBN45AA402-S21 Fuel Oil Drain POSW 3.1-4010 [-] GS MBY07GF001
MBN45CP001 Leakoil Pressure PSW 3.1-4010 PS MBY07GF001
MBN45CT101A PO Drain Temperature RTD2 3.1-4010 [0-150C] [0-150C] TC MBY07GF001
MBN45CT101B PO Drain Temperature RTD2 3.1-4010 [0-150C] [0-150C] MBY07GF001
MB
MBN51CF101-B01 Return Flow FSE 3.1-4010 [100-2000l/min] [100-2000l/min] FYI MBN17CF101-U01
MBN51CF101-U01 Return Flow AMPL 3.1-4010 FYI MBY07GF001
MBN51CT101A Return Temperature RTD2 3.1-4010 [0-150C] [0-150C] TYI MBY07GF001
MBN51CT101B Return Temperature RTD2 3.1-4010 [0-150C] [0-150C] TYI MBY07GF001
MBN52AA051-S11 Fuel Oil Return ESV PRSW 3.1-4010 [-] GSZ MBY08GF001
MBN52AA051-S12 Fuel Oil Return ESV PRSW 3.1-4010 [-] GSZ MBY08GF001
Limits and Settings
MBN52AA051-S21 Fuel Oil Return ESV PRSW 3.1-4010 [-] GSZ MBY08GF001
MBN52AA051-S22 Fuel Oil Return ESV PRSW 3.1-4010 [-] GSZ MBY08GF001
MBN52AA501-S21 Shut-off Valve PRSW 3.1-4010 [-] GS MBY08GF001
List of Measuring Instruments
0106E-X
3.1-0220-0592/14
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
MBN60CL002-S01 Auxiliary Tank Level LSW 3.1-4010 [0-190mm] > 110 -3 mm LA+ MBY07GF001
MBN60CL501 Auxiliary Tank Level LI 3.1-4010 [0-400mm] [0-400mm] LI n.a.
Siemens AG
MBN60CP511 Leakoil Pressure PI 3.1-4010 [] PI n.a.
MBN80CP101 Tank Pressure PSE 3.1-4810 [0-0.1bar] [0-0.1bar] PSA+- MBY11GF001
MBN81CF101 Flow FSE 3.1-4810 [0.4-20m3/h] [0.4-20m3/h] FSA- MBY11GF001
MBN81CP101 Purge Water Pressure PSEI 3.1-4810 [0-25bar] [0-25bar] PS+-A- MBY11GF001
MBN81CP102 Pressure PSEI 3.1-4810 [0-0.1bar] [0-0.1bar] PS+-A- MBY11GF001
MBN81CP103 Pressure PSEI 3.1-4810 [0-25bar] [0-25bar] PS+-A- MBY11GF001
MBN81CT101 Temperature TETR 3.1-4810 [] MBY11GF001
MBN82CP501 Purge Water Pressure PI 3.1-4810 [0-40bar] [0-40bar] PI n.a.
MBN83AA051-S21 Purge Water Valve PRSW 3.1-4810 [-] GS MBY11GF002A
MBN83AA052-S21 Purge Water Valve PRSW 3.1-4810 [-] GS MBY11GF002A
MBN83AA053-S21 Purge Water Valve PRSW 3.1-4810 [-] GS MBY11GF002A
MB
MBN83AA054-S21 Purge Water Valve PRSW 3.1-4810 [-] GS MBY11GF002A
MBN84AA051-S21 Purge Water Valve PRSW 3.1-4810 [-] GS MBY11GF002A
MBN84AA052-S21 Purge Water Valve PRSW 3.1-4810 [-] GS MBY11GF002A
MBP13AA051-S11 Fuel Gas ESV PRSW 3.1-5010 [-] GS MBY09GF001
MBP13AA051-S12 Fuel Gas ESV PRSW 3.1-5010 [-] GS MBY09GF001
MBP13AA051-S21 Fuel Gas ESV PRSW 3.1-5010 [-] GS-Z- MBY09GF001
Limits and Settings
0106E-X
3.1-0220-0592/15
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
MBP13CT103B Fuel Gas Temperatur RTD2 3.1-5010 [0-400C] [0-400C] TA+CZ+ MBY09GF001
MBP14CP101 Fuel Gas Pressure PSEI 3.1-5010 [0-40bar] [0-40bar] PIA+-S-Z- MBY09GF001
Siemens AG
MBP21AA151-B01 Diffusion Gas CV POSE 3.1-5010 [0-75mm] [0-75mm] GCZ+ MBY09GF001
MBP21AA151-B02 Diffusion Gas CV POSE 3.1-5010 [0-75mm] [0-75mm] GCZ+ MBY09GF001
MBP21AA151-B03 Diffusion Gas CV POSE 3.1-5010 [0-75mm] [0-75mm] GCZ+ MBY09GF001
MBP21CP401 Fuel Gas Pressure P 3.1-5010 [0-30] [0-30bar] P n.a.
MBP22AA151-B01 Fuel Gas Premix CV POSE 3.1-5010 [0-75mm] [0-75mm] GCZ+ MBY09GF001
MBP22AA151-B02 Fuel Gas Premix CV POSE 3.1-5010 [0-75mm] [0-75mm] GCZ+ MBY09GF001
MBP22AA151-B03 Fuel Gas Premix CV POSE 3.1-5010 [0-75mm] [0-75mm] GCZ+ MBY09GF001
MBP22CP401 Fuel Gas Pressure P 3.1-5010 [0-30] [0-30bar] P n.a.
MBP23AA151-B01 Pilot Gas CV POSE 3.1-5010 [0-75mm] [0-75mm] GCZ+ MBY09GF001
MBP23AA151-B02 Pilot Gas CV POSE 3.1-5010 [0-75mm] [0-75mm] GCZ+ MBY09GF001
MBP23AA151-B03 Pilot Gas CV POSE 3.1-5010 [0-75mm] [0-75mm] GCZ+ MBY09GF001
MB
MBP23CP401 Pilot Gas Pressure P 3.1-5010 [0-35] [0-35bar] P n.a.
MBP31AA401-S21 NG Diff Drain PRSW 3.1-5310 [-] GS MBY09GF005
MBP31CP101 Pressure PSEI 3.1-5010 [0-63bar] [0-40bar] PI MBY09GF011
MBP31CP402 Fuel Gas Pressure P 3.1-5010 [0-30bar] P n.a.
MBP32AA401-S21 NG Premix Drain PRSW 3.1-5310 [-] GS MBY09GF005
MBP32CP101 Pressure PSEI 3.1-5010 [0-63bar] [0-40bar] PI MBY09GF011
Limits and Settings
MBP33CF101-B02 Pilot gas mass flow PSE 3.1-5010 [0-63bar] [0-30bar] MBP33CF101-U01
MBP33CF101-B03 Pilot gas mass flow RTD1 3.1-5010 [0-200C] [0-200C] MBP33CF101-U01
MBP33CF101-U01 Pilot gas mass flow FSE 3.1-5010 [0-2kg/s] [0-2kg/s] FI DIRECT
MBP33CP101 Pressure PSEI 3.1-5010 [0-63bar] [0-40bar] PI MBY09GF011
MBP33CP402 Pilot Gas Pressure P 3.1-5010 [0-30bar] P n.a.
MBP40AA401-S21 Shut-off Valve PRSW 3.1-5310 [-] GS MBY09GF005
MBP40AA501-S21 Shut-off Valve PRSW 3.1-5310 [-] GS MBY09GF005
0106E-X
3.1-0220-0592/16
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
Siemens AG
MBQ11AA001-S12 Ignition Gas Valve PRSW 3.1-6010 [-] GS MBY13GF001
MBQ12CP501 Ignition Gas Pressure PI 3.1-6010 [0-25bar] [0-25bar] PI n.a.
MBQ13AA001-S11 Ignition Gas Valve 2 PRSW 3.1-6010 [-] GS MBY12GF001
MBQ13AA001-S12 Ignition Gas Valve 2 PRSW 3.1-6010 [-] GS MBY12GF001
MBQ13AA501-S21 Ignition Gas Vent PRSW 3.1-6010 [-] GS MBY12GF001
MBQ13AA501-S22 Ignition Gas Vent PRSW 3.1-6010 [-] GS MBY12GF001
MBU24CF501 Flow FI 3.1-7010 [1-12l/min] [1-12l/min] FI n.a.
MBU24CP101 Pressure PSEI 3.1-7010 [] PI MBY46GF001
MBU24CP501 Pressure Difference DPI 3.1-7010 [0-0.8bar] [0-0.8bar] PDI n.a.
MBU24CT101 Temperature TETR 3.1-7010 [] TI MBY46GF001
MBU24CT501 Temperature TI 3.1-7010 [] TI n.a.
MB
MBU25AP001-B01 Nox Water Pump 1 RTD1 3.1-7010 [-] [0-0-] TA+S+ DIRECT
MBU25AP001-B02 Nox Water Pump 1 RTD1 3.1-7010 [-] [0-0-] TA+S+ DIRECT
MBU25AP001-B03 Nox Water Pump 1 RTD1 3.1-7010 [-] [0-0-] TA+S+ DIRECT
MBU25AP001-B04 Nox Water Pump 1 RTD1 3.1-7010 [-] [0-0-] TA+S+ DIRECT
MBU25AP001-B05 Nox Water Pump 1 RTD1 3.1-7010 [-] [0-0-] TA+S+ DIRECT
MBU25AP001-B06 Nox Water Pump 1 RTD1 3.1-7010 [-] [0-0-] TA+S+ DIRECT
Limits and Settings
MBU25AP002-B01 Nox Water Pump 2 RTD1 3.1-7010 [-] [0-0-] TA+S+ DIRECT
MBU25AP002-B02 Nox Water Pump 2 RTD1 3.1-7010 [-] [0-0-] TA+S+ DIRECT
MBU25AP002-B03 Nox Water Pump 2 RTD1 3.1-7010 [-] [0-0-] TA+S+ DIRECT
List of Measuring Instruments
MBU25AP002-B04 Nox Water Pump 2 RTD1 3.1-7010 [-] [0-0-] TA+S+ DIRECT
MBU25AP002-B05 Nox Water Pump 2 RTD1 3.1-7010 [-] [0-0-] TA+S+ DIRECT
MBU25AP002-B06 Nox Water Pump 2 RTD1 3.1-7010 [-] [0-0-] TA+S+ DIRECT
MBU25CF001 Flow FLSW 3.1-7010 [1-150cm/s] FS- MBY46GF001
MBU25CP001 Nox Water Inlet Pressure PSW 3.1-7010 [0.5-6bar] < 0.6 + bar PS- MBY46GF001
MBU25CP101 Pressure PSE 3.1-7010 [0-160bar] [0-160bar] PYS- MBY46GF001
MBU25CP105 Pressure PSE 3.1-7010 [] PYS- MBY46GF001
0106E-X
3.1-0220-0592/17
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
Siemens AG
MBU25CP513 Nox Water Pressure PI 3.1-7010 [0-160bar] [0-160bar] PI n.a.
MBU25CT001 Inlet Temperature TSW 3.1-7010 [0-100C] > 80 - C TS+ MBY46GF001
MBU25CT105A Bearing Temperatur RTD2 3.1-7010 [0-200C] [0-200C] TA+ DIRECT
MBU25CT105B Bearing Temperatur RTD2 3.1-7010 [0-200C] [0-200C] TA+ DIRECT
MBU25CT106A Bearing Temperatur RTD2 3.1-7010 [0-200C] [0-200C] TA+ DIRECT
MBU25CT106B Bearing Temperatur RTD2 3.1-7010 [0-200C] [0-200C] TA+ DIRECT
MBU25CT107A Bearing Temperatur RTD2 3.1-7010 [0-200C] [0-200C] TA+ DIRECT
MBU25CT107B Bearing Temperatur RTD2 3.1-7010 [0-200C] [0-200C] TA+ DIRECT
MBU25CT108A Bearing Temperatur RTD2 3.1-7010 [0-200C] [0-200C] TA+ DIRECT
MBU25CT108B Bearing Temperatur RTD2 3.1-7010 [0-200C] [0-200C] TA+ DIRECT
MBU25CT115A Bearing Temperatur RTD2 3.1-7010 [0-200C] [0-200C] TA+ DIRECT
MB
MBU25CT115B Bearing Temperatur RTD2 3.1-7010 [0-200C] [0-200C] TA+ DIRECT
MBU25CT116A Bearing Temperatur RTD2 3.1-7010 [0-200C] [0-200C] TA+ DIRECT
MBU25CT116B Bearing Temperatur RTD2 3.1-7010 [0-200C] [0-200C] TA+ DIRECT
MBU25CT117A Bearing Temperatur RTD2 3.1-7010 [0-200C] [0-200C] TA+ DIRECT
MBU25CT117B Bearing Temperatur RTD2 3.1-7010 [0-200C] [0-200C] TA+ DIRECT
MBU25CT118A Bearing Temperatur RTD2 3.1-7010 [0-200C] [0-200C] TA+ DIRECT
Limits and Settings
0106E-X
3.1-0220-0592/18
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
Siemens AG
MBU46AA051-S21 HP-PM-Emulsion ESV PRSW 3.1-7010 [-] GS MBY46GF001
MBU46AA051-S22 HP-PM-Emulsion ESV PRSW 3.1-7010 [-] GS MBY46GF001
MBU46AA052-S21 Release Valve PRSW 3.1-7010 [-] GS MBY46GF001
MBU46AA151-B01 HP-PM-Emulsion CV POSE 3.1-7010 [0-75mm] [0-75mm] GICS MBY46GF001
MBU46AA151-B02 HP-PM-Emulsion CV POSE 3.1-7010 [0-75mm] [0-75mm] MBY46GF001
MBU46AA151-B03 HP-PM-Emulsion CV POSE 3.1-7010 [0-75mm] [0-75mm] GICS MBY46GF001
MBU46CP101 Pressure PSE 3.1-7010 [0-160bar] [0-160bar] PY MBY46GF001
MBU46CP102 Pressure PSE 3.1-7010 bar [bar] PY MBY46GF001
MBU48CF101 Flow FSE 3.1-7010 [0-2000l/min] [0-2000l/min] FS+ MBY46GF001
MBU48CT401 Temperature T 3.1-7010 [0-100] [0-100C] T n.a.
MBV10CL101 Tank Level LS 3.1-8010 [0-750mm] [0-750mm] LIA+-S+-Z+- MBY15GF001
MB
MBV10CL102 Tank Level LS 3.1-8010 [0-750mm] [0-750mm] LIA+-S+-Z+- MBY15GF001
MBV10CL103 Tank Level LS 3.1-8010 [0-750mm] [0-750mm] LIA+-S+-Z+- MBY15GF001
MBV10CL501 Tank Level LI 3.1-8010 [0-650mm] [0-650mm] LI n.a.
MBV10CT101A Tank Temperature RTD2 3.1-8010 [0-100C] [0-100C] TA-S+- MBY15GF001
MBV10CT101B Tank Temperature RTD2 3.1-8010 [0-100C] [0-100C] TIA-S+- MBY15GF001
MBV10CT501 Tank Temperature TI 3.1-8010 C [C] TI n.a.
Limits and Settings
0106E-X
3.1-0220-0592/19
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
Siemens AG
MBV26CP402 Pressure P 3.1-8010 [0-4] [0-4bar] P n.a.
MBV26CP403 Pressure P 3.1-8010 [0-4] [0-4bar] P n.a.
MBV26CP404 Pressure P 3.1-8010 [0-4] [0-4bar] P n.a.
MBV26CP406 Pressure P 3.1-8010 [0-4] [0-4bar] P n.a.
MBV26CP407 Pressure P 3.1-8010 [0-4] [0-4bar] P n.a.
MBV26CP408 Pressure P 3.1-8010 [0-4] [0-4bar] P n.a.
MBV26CP409 Pressure P 3.1-8010 [0-4] [0-4bar] P n.a.
MBV26CP410 Pressure P 3.1-8010 [0-4] [0-4bar] P n.a.
MBV26CP501 Pressure PI 3.1-8010 [0-6bar] [0-6bar] PI n.a.
MBV26CT101A Inlet Temperature RTD2 3.1-8010 [0-400C] [0-400C] TA+ MBY15GF001
MBV26CT101B Inlet Temperature RTD2 3.1-8010 [0-400C] [0-400C] TA+ MBY15GF001
MB
MBV30CP001 Lifting Oil Pressure PSW 3.1-8010 [5-160bar] < 100 +30 bar PDIA+ MBY15GF001
MBV30CP101 Pressure PSEI 3.1-8010 [80-160bar] [80-160bar] PIA-S- MBY15GF001
MBV30CP102 Pressure PSEI 3.1-8010 [80-160bar] [80-160bar] PIA-S- MBY15GF001
MBV30CP103 Lifting Oil Pressure PSEI 3.1-8010 [0-100bar] [0-100bar] PI MBY15GF001
MBV30CP104 Pressure PSEI 3.1-8010 [0-100bar] [0-100bar] PI MBY15GF001
MBV30CP502 Lifting Oil Pressure PI 3.1-8010 [0-250bar] [0-250bar] PI n.a.
Limits and Settings
0106E-X
3.1-0220-0592/20
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
Siemens AG
MBV50CP402 Pressure P 3.1-8010 [-1-0.6] [-1-0.6bar] P n.a.
MBV50CP501 Pressure PI 3.1-8010 [-40-0mbar] [-40-0mbar] PI n.a.
MBV50CP502 Pressure PI 3.1-8010 [-1-0.6bar] [-1-0.6bar] PI n.a.
MBV50CP503 Pressure PI 3.1-8010 [-1-0.6bar] [-1-0.6bar] PI n.a.
MBV90CF401 Flow FI 3.1-8010 [-] [0-0] FI n.a.
MBV90CF402 Flow FI 3.1-8010 [-] [0-0] FI n.a.
MBV90CF404 Flow FI 3.1-8010 [-] [0-0] FI n.a.
MBV90CF405 Flow FI 3.1-8010 [-] [0-0] FI n.a.
MBV90CP401 Return Pressure P 3.1-8010 [-1-0.6] [-1-0.6bar] P n.a.
MBV90CP402 Return Pressure P 3.1-8010 [-1-0.6] [-1-0.6bar] P n.a.
MBV90CP404 Return Pressure P 3.1-8010 [-1-0.6] [-1-0.6bar] P n.a.
MB
MBV90CP405 Return Pressure P 3.1-8010 [-1-0.6] [-1-0.6bar] P n.a.
MBV90CT101A Return Temperature TC1 3.1-8010 [] TIA+ DIRECT
MBV90CT101B Return Temperature TC1 3.1-8010 [] TIA+ DIRECT
MBV90CT102A Return Temperature TC1 3.1-8010 [] TIA+ DIRECT
MBV90CT102B Return Temperature TC1 3.1-8010 [] TIA+ DIRECT
MBV90CT104A Return Temperature TC1 3.1-8010 [] TIA+ DIRECT
Limits and Settings
0106E-X
3.1-0220-0592/21
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
Siemens AG
MBX02CP102 Pump Pressure PSE 3.1-9010 [0-250bar] [0-250bar] PI MBY10GF001
MBX02CP401 Pressure P 3.1-9010 [0-250] [0-250bar] P n.a.
MBX02CP402 Pressure P 3.1-9010 [0-250] [0-250bar] P n.a.
MBX02CP501 Pressure PI 3.1-9010 [0-250bar] [0-250bar] PI n.a.
MBX02CP502 Pressure PI 3.1-9010 [0-250bar] [0-250bar] PI n.a.
MBX03CP001 Pressure Difference DPSWI 3.1-9010 [5-5bar] > 5 -0.5 bar PDA+O+ MBY10GF001
MBX03CP002 Pressure Difference DPSWI 3.1-9010 [5-5bar] > 5 -0.5 bar PDA+O+ MBY10GF001
MBX03CP101 Feed Line Pressure PSE 3.1-9010 [0-250bar] [0-250bar] PA-S- MBY10GF001
MBX03CP401 Pressure P 3.1-9010 [0-250] [0-250bar] P n.a.
MBX03CP402 Pressure P 3.1-9010 [0-250] [0-250bar] P n.a.
MBX03CP403 Pressure P 3.1-9010 [0-250] [0-250bar] P n.a.
MB
MBX03CP404 Pressure P 3.1-9010 [0-250] [0-250bar] P n.a.
MBX03CP407 Feed Line Pressure P 3.1-9010 [0-250] [0-250bar] P n.a.
MBX03CT101A Feed Line Temperature RTD1 3.1-9010 [0-100C] [0-100C] TI MBY10GF001
MBX03CT101B Feed Line Temperature RTD1 3.1-9010 [0-100C] [0-100C] TI MBY10GF001
MBX03CT102A Feed Line Temperature RTD1 3.1-9010 [0-100C] [0-100C] TI MBY10GF001
MBX03CT102B Feed Line Temperature RTD1 3.1-9010 [0-100C] [0-100C] TI MBY10GF001
Limits and Settings
0106E-X
3.1-0220-0592/22
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
Siemens AG
MBX06CT101A Auxiliary Temp CCT RTD2 3.1-9010 [0-100C] [0-100C] TI MBY10GF001
MBX06CT101B Auxiliary Temp CCT RTD2 3.1-9010 [0-100C] [0-100C] TI MBY10GF001
MBX06CT501 Temperature TI 3.1-9010 [0-100C] [0-100C] TI n.a.
MBX21AA501-S21 Release Valve POSW 3.1-9810 [-] GS intern
MBX21AA502-S21 Release Valve POSW 3.1-9810 [-] GS intern
MBX21AN001-H01 Pneumatic Compressor MES 3.1-9810 [-] O MBY40GH001
MBX21AN001-H02 Pneumatic Compressor MES 3.1-9810 [-] O MBY40GH001
MBX21AN002-H01 Pneumatic Compressor MES 3.1-9810 [-] O MBY40GH002
MBX21AN002-H02 Pneumatic Compressor MES 3.1-9810 [-] O MBY40GH002
MBX22CP001 Pressure Difference DPSWI 3.1-9810 [0-1bar] PDA+ intern
MBX22CP002 Pressure Difference DPSWI 3.1-9810 [0-1bar] PDA+ intern
MB
MBX24CP001 Pneumatic Pressure PSW 3.1-9810 [0-10bar] < 7 +0.5 bar PA-Z- MBY40GH001
MBX24CP002 Pneumatic Pressure PSW 3.1-9810 [0-10bar] < 6.7 +0.8 bar PZ- MBY40GH002
MBX24CP003 Pneumatic Pressure PSW 3.1-9810 [0-10bar] < 8.5 +1 bar PS+- intern
MBX24CP004 Pneumatic Pressure PSW 3.1-9810 [0-10bar] < 8.5 +1 bar PS+- intern
MBX24CP008 Pneumatic Pressure PSW 3.1-9810 [0-10bar] < 6.7 +0.8 bar PZ- MBY40GH002
MBX24CP501 Pneumatic Pressure PI 3.1-9810 [0-16bar] [0-16bar] PI -----
Limits and Settings
0106E-X
3.1-0220-0592/23
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
Siemens AG
MBX60CP404 Pressure P 3.1-9310 [0-250bar] P -----
MBX60CP502 Pressure Difference DPI 3.1-9310 [5-5bar] [5-5bar] PDI -----
MBX61CP401 Pressure P 3.1-9310 [0-250bar] P -----
MBX61CP402 Pressure P 3.1-9310 [0-250bar] P -----
MBX61CP403 Pressure P 3.1-9310 [0-250bar] P -----
MBX61CP404 Pressure P 3.1-9310 [0-250bar] P -----
MBX61CP502 Pressure Difference DPI 3.1-9310 [5-5bar] [5-5bar] PDI -----
MBX70CP401 Pressure P 3.1-9210 [0-250bar] P -----
MBX70CP402 Pressure P 3.1-9210 [0-250bar] P -----
MBX70CP403 Pressure P 3.1-9210 [0-250bar] P -----
MBX70CP404 Pressure P 3.1-9210 [0-250bar] P -----
MB
MBX70CP502 Contaminations Ind DPI 3.1-9210 [5-5bar] [5-5bar] PDI -----
MBX75CP401 Pressure P 3.1-9110 [0-250bar] P -----
MBX75CP402 Pressure P 3.1-9110 [0-250bar] P -----
MBX75CP403 Pressure P 3.1-9110 [0-250bar] P -----
MBX75CP404 Pressure P 3.1-9110 [0-250bar] P -----
MBX75CP502 Pressure Difference DPI 3.1-9110 [5-5bar] [5-5bar] PDI -----
Limits and Settings
0106E-X
3.1-0220-0592/24
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
Siemens AG
MBX81CP402 Pressure P 3.1-9210 [0-250bar] P -----
MBX81CP403 Pressure P 3.1-9210 [0-250bar] P -----
MBX81CP404 Pressure P 3.1-9210 [0-250bar] P -----
MBX81CP502 Contaminations Ind DPI 3.1-9210 [5-5bar] [5-5bar] PDI n.a.
MBX82CP401 Pressure P 3.1-9210 [0-250bar] P -----
MBX82CP402 Pressure P 3.1-9210 [0-250bar] P -----
MBX82CP404 Pressure P 3.1-9210 [0-250bar] P -----
MBX82CP502 Contaminations Ind DPI 3.1-9210 [5-5bar] [5-5bar] PDI -----
MBX86CP401 Pressure P 3.1-9110 [0-250bar] P -----
MBX86CP402 Pressure P 3.1-9110 [0-250bar] P -----
MBX86CP404 Pressure P 3.1-9110 [0-250bar] P -----
MB
MBX86CP502 Pressure Difference DPI 3.1-9110 [5-5bar] [5-5bar] PDI -----
MBX87CP401 Pressure P 3.1-9110 [0-250bar] P -----
MBX87CP402 Pressure P 3.1-9110 [0-250bar] P -----
MBX87CP403 Pressure P 3.1-9110 [0-250bar] P -----
MBX87CP404 Pressure P 3.1-9110 [0-250bar] P -----
MBX87CP502 Pressure Difference DPI 3.1-9110 [5-5bar] [5-5bar] PDI -----
Limits and Settings
0106E-X
3.1-0220-0592/25
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
Siemens AG
MBY11GF002 Junction Box JB ----- DIRECT
MBY12GF001 Junction Box JB ----- DIRECT
MBY13GF001 Junction Box JB ----- DIRECT
MBY15GF001 Junction Box JB ----- DIRECT
MBY15GF030 Junction Box JB ----- DIRECT
MBY18GF001 Junction Box JB ----- MBY02GF001E
MBY19GF001 Junction Box JB ----- DIRECT
MBY20GF001 Junction Box JB ----- DIRECT
MBY21GF001 Junction Box JB ----- CUH01
MBY31GF101 Junction Box JB ----- MBY31GH001
MBY31GF102 Junction Box JB ----- MBY31GH001
MB
MBY31GF103 Junction Box JB ----- MBY31GH001
MBY31GF104 Junction Box JB ----- MBY31GH001
MBY31GF105 Junction Box JB ----- MBY31GH001
MBY31GF151 Junction Box JB ----- MBY31GH001
MBY31GF151-N01 Temp Controller RTD1 ----- [0-225Grad C] [195-205Grad C] MBY31GF151
MBY31GF151-S01 Temp Limiter RTD1 ----- [0-350Grad C] [0-350Grad C] MBY31GF151
Limits and Settings
0106E-X
3.1-0220-0592/26
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
Siemens AG
MBY39GF001 Junction Box JB ----- DIRECT
MBY40GF001 Junction Box JB ----- DIRECT
MBY40GH001 JB Air compressor unit JB ----- DIRECT
MBY40GH002 Junction Box JB ----- DIRECT
MBY44GF001 Junction Box JB ----- DIRECT
MBY45GF001 Junction Box JB ----- DIRECT
MBY46GF001 Junction Box JB ----- DIRECT
MB
Limits and Settings
List of Measuring Instruments
0106E-X
3.1-0220-0592/27
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
Siemens AG
MBA22AA001-Y01 Fuel Oil Drain Valve SOV 3.1-1210 1AC220 0.073 MBY19GF001
MBA22AA002-Y01 Fuel Oil Drain Valve SOV 3.1-1210 1AC220 0.073 MBY19GF001
MBA51AP001-E01 gear pump MO 3.1-1510 3AC380 DIRECT
MBA51AP001-M01 gear pump MO 3.1-1510 3AC380 DIRECT
MBA51AP002-E01 gear pump MO 3.1-1510 3AC380 DIRECT
MBA51AP002-M01 gear pump MO 3.1-1510 3AC380 DIRECT
MBA53AA001-Y01 Transfer Valve SOV 3.1-1510 DC24 MBY15GF030
MBA53AA002-Y01 Transfer Valve SOV 3.1-1510 DC24 MBY15GF030
MBA53AA003-Y01 Transfer Valve SOV 3.1-1510 DC24 MBY15GF030
MBA53AA004-Y01 Transfer Valve SOV 3.1-1510 DC24 MBY15GF030
MBA53AA005-Y01 Transfer Valve SOV 3.1-1510 DC24 MBY15GF030
MB
MBA53AA006-Y01 Transfer Valve SOV 3.1-1510 DC24 MBY15GF030
MBH22AA101-E01 Control Valve HEAT 3.1-2010 1AC220 0.01 DIRECT
MBH22AA101-M01 Control Valve CDMO 3.1-2010 3AC380 0.2 DIRECT
MBH22AA102-E01 Control Valve HEAT 3.1-2010 1AC220 0.01 DIRECT
MBH22AA102-M01 Control Valve CDMO 3.1-2010 3AC380 0.2 DIRECT
MBH23AA101-E01 Control Valve HEAT 3.1-2010 1AC220 0.01 DIRECT
Limits and Settings
0106E-X
3.1-0230-0592/1
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
Siemens AG
MBM12AV004-E11 Burner SP 3.1-3010 1AC5000 0.05 MBM12GT004
MBM12AV004-E12 Burner SP 3.1-3010 1AC5000 0.05 MBM12GT004
MBM12AV005-E11 Burner SP 3.1-3010 1AC5000 0.05 MBM12GT005
MBM12AV005-E12 Burner SP 3.1-3010 1AC5000 0.05 MBM12GT005
MBM12AV006-E11 Burner SP 3.1-3010 1AC5000 0.05 MBM12GT006
MBM12AV006-E12 Burner SP 3.1-3010 1AC5000 0.05 MBM12GT006
MBM12AV007-E11 Burner SP 3.1-3010 1AC5000 0.05 MBM12GT007
MBM12AV007-E12 Burner SP 3.1-3010 1AC5000 0.05 MBM12GT007
MBM12AV008-E11 Burner SP 3.1-3010 1AC5000 0.05 MBM12GT008
MBM12AV008-E12 Burner SP 3.1-3010 1AC5000 0.05 MBM12GT008
MBM12AV009-E11 Burner SP 3.1-3010 1AC5000 0.05 MBM12GT009
MB
MBM12AV009-E12 Burner SP 3.1-3010 1AC5000 0.05 MBM12GT009
MBM12AV010-E11 Burner SP 3.1-3010 1AC5000 0.05 MBM12GT010
MBM12AV010-E12 Burner SP 3.1-3010 1AC5000 0.05 MBM12GT010
MBM12AV011-E11 Burner SP 3.1-3010 1AC5000 0.05 MBM12GT011
MBM12AV011-E12 Burner SP 3.1-3010 1AC5000 0.05 MBM12GT011
MBM12AV012-E11 Burner SP 3.1-3010 1AC5000 0.05 MBM12GT012
Limits and Settings
0106E-X
3.1-0230-0592/2
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
Siemens AG
MBM12AV020-E11 Burner SP 3.1-3010 1AC5000 0.05 MBM12GT020
MBM12AV020-E12 Burner SP 3.1-3010 1AC5000 0.05 MBM12GT020
MBM12AV021-E11 Burner SP 3.1-3010 1AC5000 0.05 MBM12GT021
MBM12AV021-E12 Burner SP 3.1-3010 1AC5000 0.05 MBM12GT021
MBM12AV022-E11 Burner SP 3.1-3010 1AC5000 0.05 MBM12GT022
MBM12AV022-E12 Burner SP 3.1-3010 1AC5000 0.05 MBM12GT022
MBM12AV023-E11 Burner SP 3.1-3010 1AC5000 0.05 MBM12GT023
MBM12AV023-E12 Burner SP 3.1-3010 1AC5000 0.05 MBM12GT023
MBM12AV024-E11 Burner SP 3.1-3010 1AC5000 0.05 MBM12GT024
MBM12AV024-E12 Burner SP 3.1-3010 1AC5000 0.05 MBM12GT024
MBM12GT001 Ignition Transformer TR 3.1-3010 1AC220 0.2 MBY04GF002-X01
MB
MBM12GT002 Ignition Transformer TR 3.1-3010 1AC220 0.2 MBY04GF002-X01
MBM12GT003 Ignition Transformer TR 3.1-3010 1AC220 0.2 MBY04GF002-X01
MBM12GT004 Ignition Transformer TR 3.1-3010 1AC220 0.2 MBY04GF002-X01
MBM12GT005 Ignition Transformer TR 3.1-3010 1AC220 0.2 MBY04GF002-X01
MBM12GT006 Ignition Transformer TR 3.1-3010 1AC220 0.2 MBY04GF002-X01
MBM12GT007 Ignition Transformer TR 3.1-3010 1AC220 0.2 MBY04GF001-X01
Limits and Settings
0106E-X
3.1-0230-0592/3
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
Siemens AG
MBM12GT023 Ignition Transformer TR 3.1-3010 1AC220 0.2 MBY03GF003-X01
MBM12GT024 Ignition Transformer TR 3.1-3010 1AC220 0.2 MBY03GF003-X01
MBN12AP001-E01 Fuel Oil Injection Pump MO 3.1-4010 3AC11000 DIRECT
MBN12AP001-M01 Fuel Oil Injection Pump MO 3.1-4010 3AC11000 DIRECT
MBN12AP002-E01 Fuel Oil Injection Pump MO 3.1-4010 3AC11000 DIRECT
MBN12AP002-M01 Fuel Oil Injection Pump MO 3.1-4010 3AC11000 DIRECT
MBN14AA501-Y01 Shut-off Valve SOV 3.1-4010 DC220 MBY08GF001
MBN23AA501-Y01 Shut-off Valve SOV 3.1-4010 DC220 MBY08GF001
MBN34AA002-Y01 Leakoil Valve SOV 3.1-4010 DC220 MBY07GF001
MBN44AA002-Y01 Leakoil Valve SOV 3.1-4010 DC220 MBY07GF001
MBN45AA401-Y01 Fuel Oil Drain SOV 3.1-4010 DC220 MBY07GF001
MB
MBN45AA402-Y01 Fuel Oil Drain SOV 3.1-4010 DC220 MBY07GF001
MBN45AA501-Y01 Shut-off Valve SOV 3.1-4010 DC 24 MBY07GF001
MBN52AA501-Y01 Shut-off Valve SOV 3.1-4010 DC220 MBY08GF001
MBN60AP001-E01 Leakoil Pump 1 MO 3.1-4010 3AC380 DIRECT
MBN60AP001-M01 Leakoil Pump 1 MO 3.1-4010 3AC380 DIRECT
MBN80AA001-Y01 Filling Valve SOV 3.1-4810 DC 24 MBY11GF001
Limits and Settings
0106E-X
3.1-0230-0592/4
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
Siemens AG
MBP31AH112 Trace Heater HEAT 3.1-5010 3AC380 2 MBY31GF105
MBP32AA401-Y01 NG Premix Drain SOV 3.1-5310 DC220 MBY09GF005
MBP33AA401-Y01 NG Pilot Drain SOV 3.1-5310 DC220 MBY09GF005
MBP40AA401-Y01 Shut-off Valve SOV 3.1-5310 DC220 MBY09GF005
MBP40AA501-Y01 Shut-off Valve SOV 3.1-5310 DC220 MBY09GF005
MBQ11AA001-Y01 Ignition gas valve 1 SOV 3.1-6010 DC220 MBY13GF001
MBQ13AA001-Y01 Ignition Gas Valve 2 SOV 3.1-6010 DC220 MBY12GF001
MBQ13AA501-Y01 Ignition Gas Vent SOV 3.1-6010 DC220 MBY12GF001
MBU25AP001-E01 Nox Water Pump 1 MO 3.1-7010 3AC11000 DIRECT
MBU25AP001-M01 Nox Water Pump 1 MO 3.1-7010 3AC11000 DIRECT
MBU25AP002-E01 Nox Water Pump 2 MO 3.1-7010 3AC11000 DIRECT
MB
MBU25AP002-M01 Nox Water Pump 2 MO 3.1-7010 3AC11000 DIRECT
MBV21AP001-E01 Main Lube Oil Pump MO 3.1-8010 3AC380 DIRECT
MBV21AP001-M01 Main Lube Oil Pump MO 3.1-8010 3AC380 DIRECT
MBV21AP002-E01 Auxiliary Oil Pump MO 3.1-8010 3AC380 DIRECT
MBV21AP002-M01 Auxiliary Oil Pump MO 3.1-8010 3AC380 DIRECT
MBV21AP003-E01 Emergency Oil Pump MO 3.1-8010 DC220 DIRECT
Limits and Settings
0106E-X
3.1-0230-0592/5
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
Siemens AG
MBX02AP001-E01 Hydraulic Pump MO 3.1-9010 3AC380 DIRECT
MBX02AP001-M01 Hydraulic Pump MO 3.1-9010 3AC380 DIRECT
MBX02AP002-E01 Hydraulic Pump MO 3.1-9010 3AC380 DIRECT
MBX02AP002-M01 Hydraulic Pump MO 3.1-9010 3AC380 DIRECT
MBX06AH001-E01 Air Cooler MO 3.1-9010 3AC380 DIRECT
MBX06AH001-M01 Air Cooler MO 3.1-9010 3AC380 DIRECT
MBX06AH002-E01 Air Cooler MO 3.1-9010 3AC380 DIRECT
MBX06AH002-M01 Air Cooler MO 3.1-9010 3AC380 DIRECT
MBX21AA501-Y01 Release Valve SOV 3.1-9810 1AC220 MBY40GH001
MBX21AA502-Y01 Release Valve SOV 3.1-9810 1AC220 MBY40GH002
MBX21AN001-E01 Pneumatic Compressor MO 3.1-9810 3AC380 MBY40GH001
MB
MBX21AN001-M01 Pneumatic Compressor MO 3.1-9810 3AC380 MBY40GH001
MBX21AN002-E01 Pneumatic Compressor MO 3.1-9810 3AC380 MBY40GH002
MBX21AN002-M01 Pneumatic Compressor MO 3.1-9810 3AC380 MBY40GH002
MBX22AT001-M01 Pneumatic Dryer MO 3.1-9810 1AC220 MBY40GH001
MBX22AT002-M01 Pneumatic Dryer MO 3.1-9810 1AC220 MBY40GH002
MBX22AT011-Y01 Steam Trap SC 3.1-9810 1AC220 MBY40GH001
Limits and Settings
0106E-X
3.1-0230-0592/6
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
Siemens AG
MBX60AA101-Y01 Servo Valve CDC 3.1-9310 DC 24 0.001 MBY46GF001
MBX60AA101-Y11 Servo Valve CDC 3.1-9310 DC 24 0.001 MBY46GF001
MBX61AA002-Y01 Pre Control Valve SOV 3.1-9310 DC 24 0.03 MBY46GF001
MBX61AA002-Y02 Pre Control Valve SOV 3.1-9310 DC 24 0.03 MBY46GF001
MBX61AA101-Y01 Servo Valve CDC 3.1-9310 DC 24 0.001 MBY46GF001
MBX61AA101-Y11 Servo Valve CDC 3.1-9310 DC 24 0.001 MBY46GF001
MBX69AA001-Y01 Change-over Valve SOV 3.1-7010 DC 24 MBY46GF001
MBX69AA002-Y01 Change-over Valve SOV 3.1-7010 DC 24 MBY46GF001
MBX70AA001-Y01 Pre Control Valve SOV 3.1-9210 DC 24 0.03 MBY09GF001
MBX70AA001-Y02 Pre Control Valve SOV 3.1-9210 DC 24 0.03 MBY09GF001
MBX70AA031-Y01 Opening Valve SOV 3.1-9210 DC 24 0.03 MBY09GF001
MB
MBX70AA031-Y02 Opening Valve SOV 3.1-9210 DC 24 0.03 MBY09GF001
MBX75AA001-Y01 Pre Control Valve SOV 3.1-9110 DC 24 0.03 MBY08GF001
MBX75AA001-Y02 Pre Control Valve SOV 3.1-9110 DC 24 0.03 MBY08GF001
MBX75AA031-Y01 Opening Valve SOV 3.1-9110 DC 24 0.03 MBY08GF001
MBX75AA031-Y02 Opening Valve SOV 3.1-9110 DC 24 0.03 MBY08GF001
MBX77AA001-Y01 Pre Control Valve SOV 3.1-9110 DC 24 0.03 MBY08GF001
Limits and Settings
0106E-X
3.1-0230-0592/7
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
Siemens AG
MBX82AA101-Y01 Servo Valve CDC 3.1-9210 DC 24 0.001 MBY09GF001
MBX82AA101-Y11 Servo Valve CDC 3.1-9210 DC 24 0.001 MBY09GF001
MBX86AA101-Y01 Servo Valve CDC 3.1-9110 DC 24 0.001 MBY08GF001
MBX86AA101-Y11 Servo Valve CDC 3.1-9110 DC 24 0.001 MBY08GF001
MBX87AA002-Y01 Pre Control Valve SOV 3.1-9110 DC 24 0.03 MBY08GF001
MBX87AA002-Y02 Pre Control Valve SOV 3.1-9110 DC 24 0.03 MBY08GF001
MBX87AA101-Y01 Servo Valve CDC 3.1-9110 DC 24 0.001 MBY08GF001
MBX87AA101-Y11 Servo Valve CDC 3.1-9110 DC 24 0.001 MBY08GF001
MBX88AA002-Y01 Pre Control Valve SOV 3.1-9110 DC 24 0.03 MBY08GF001
MBX88AA002-Y02 Pre Control Valve SOV 3.1-9110 DC 24 0.03 MBY08GF001
MBX88AA101-Y01 Servo Valve CDC 3.1-9110 DC 24 0.001 MBY08GF001
MB
MBX88AA101-Y11 Servo Valve CDC 3.1-9110 DC 24 0.001 MBY08GF001
MBX90AA001-Y01 Change-over Valve SOV 3.1-9910 DC 24 0.01 MBY39GF001B
MBX91AA001-Y01 Change-over Valve SOV 3.1-9910 DC 24 0.01 MBY39GF001B
MBX92AA001-Y01 Change-over Valve SOV 3.1-9910 DC 24 0.01 MBY39GF001B
MBX93AA001-Y01 Change-over Valve SOV 3.1-9910 DC 24 0.01 MBY39GF001B
MBX98AA007-Y01 Change-over Valve SOV 3.1-9830 DC 24 MBY07GF001
Limits and Settings
0106E-X
3.1-0230-0592/8
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Power Generation
Technical Data
Siemens AG
MB
Limits and Settings
List of Electrical Loads
0106E-X
3.1-0230-0592/9
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Tag No. Name Type Diagram Vlv. Pos. Technical Data Note(s)
MBA11AA301 Shut-off Valve SV 3.1-1010 O [PN:250bar; NomW:10mm]
MBA11AA341 Shut-off Valve SV 3.1-1010 O [PN:250bar; NomW:10mm]
MBA11AA342 Shut-off Valve SV 3.1-1010 O [PN:250bar; NomW:10mm]
Gas Turbine
Power Generation
Technical Data
Siemens AG
MBA11AA371 Shut-off Valve SV 3.1-1010 O [PN:250bar; NomW:10mm]
MBA11AA372 Shut-off Valve SV 3.1-1010 O [PN:250bar; NomW:10mm]
MBA11AA373 Shut-off Valve SV 3.1-1010 O [PN:250bar; NomW:10mm]
MBA11AS001KE01 Adjustment ACT 3.1-1010
MBA12AA301 Shut-off Valve SV 3.1-1010 O [PN:250bar; NomW:10mm]
MBA12AA302 Shut-off Valve SV 3.1-1010 O [PN:250bar; NomW:10mm]
MBA21AA251 Drain Valve SOVC 3.1-1210 C [PN:25bar; NomW:25mm]
MBA21AA252 Drain Valve SOVC 3.1-1210 C [PN:25bar; NomW:25mm]
MBA21AA253 Drain Valve SOVC 3.1-1210 C [PN:25bar; NomW:25mm]
MBA21AA254 Drain Valve SOVC 3.1-1210 C [PN:25bar; NomW:25mm]
MBA22AA001KA01 Fuel Oil Drain Valve SV 3.1-1210 [PN:40bar; NomW:25mm]
MBA22AA002KA01 Fuel Oil Drain Valve SV 3.1-1210 [PN:40bar; NomW:25mm]
MB
MBA22AA251 Drain Valve SOVC 3.1-1210 C [PN:25bar; NomW:25mm]
MBA23AA251 Drain Valve SOVC 3.1-1210 C [PN:25bar; NomW:25mm]
MBA23AA252 Drain Valve SOVC 3.1-1210 C [PN:25bar; NomW:25mm]
MBA23AA253 Drain Valve SOVC 3.1-1210 C [PN:25bar; NomW:25mm]
MBA24AA251 Drain Valve SOVC 3.1-1210 C [PN:25bar; NomW:25mm]
Equipment List
0106E-X
3.1-0240-0592/1
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Tag No. Name Type Diagram Vlv. Pos. Technical Data Note(s)
MBA51AA193 Pressure Relief Valve PRLV 3.1-1510
MBA51AA201 Check Valve CKV 3.1-1510
MBA51AA203 Filling Valve SV 3.1-1510
Gas Turbine
Power Generation
Technical Data
Siemens AG
MBA51AA251KA01 Ball Valve SOVC 3.1-1510
MBA51AA252KA01 Ball Valve SOVC 3.1-1510
MBA51AA255 Shut-off Valve SV 3.1-1510
MBA51AA257 Release Valve SOVC 3.1-1510
MBA51AA301 Shut-off Valve SV 3.1-1510
MBA51AA302 Shut-off Valve SV 3.1-1510
MBA51AA303 Shut-off Valve SV 3.1-1510
MBA51AA304 Shut-off Valve SV 3.1-1510
MBA51AA305 Shut-off Valve SV 3.1-1510
MBA51AA306 Shut-off Valve SV 3.1-1510
MBA51AA307 Shut-off Valve SV 3.1-1510
MB
MBA51AA308 Shut-off Valve SV 3.1-1510
MBA51AP001KP01 gear pump PDP 3.1-1510
MBA51AP002KP01 gear pump PDP 3.1-1510
MBA51AT001 Filter FILT 3.1-1510
MBA51BB001 Accumulator PAC 3.1-1510
Equipment List
0106E-X
3.1-0240-0592/2
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Tag No. Name Type Diagram Vlv. Pos. Technical Data Note(s)
MBA54AA151 Pressure Relief Valve PRLV 3.1-1510
MBA54AA152 Pressure Relief Valve PRLV 3.1-1510
MBA54AA154 Flow Control Valve FCV 3.1-1510
Gas Turbine
Power Generation
Technical Data
Siemens AG
MBA54AA202 Check Valve CKV 3.1-1510
MBA54AA301 Shut-off Valve SV 3.1-1510
MBA54AA302 Shut-off Valve SV 3.1-1510
MBA54AA303 Shut-off Valve SV 3.1-1510
MBA54AA304 Shut-off Valve SV 3.1-1510
MBH22AA101KA01 Control Flap DAMP 3.1-2010 [PN:40bar; NomW:250mm]
MBH22AA102KA01 Control Flap DAMP 3.1-2010 [PN:40bar; NomW:250mm]
MBH22AA302 Shut-off Valve SV 3.1-2010 O [PN:250bar; NomW:10mm]
MBH22AA303 Shut-off Valve SV 3.1-2010 O [PN:250bar; NomW:10mm]
MBH22AA312 Shut-off Valve 3.1-2010
MBH22AA313 Shut-off Valve 3.1-2010
MB
MBH23AA101KA01 Control Flap DAMP 3.1-2010 [PN:25bar; NomW:250mm]
MBH23AA102KA01 Control Flap DAMP 3.1-2010 [PN:25bar; NomW:250mm]
MBH23AA302 Shut-off Valve SV 3.1-2010 O [PN:250bar; NomW:10mm]
MBH23AA303 Shut-off Valve SV 3.1-2010 O [PN:250bar; NomW:10mm]
MBH23AA312 Shut-off Valve 3.1-2010
Equipment List
0106E-X
3.1-0240-0592/3
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Tag No. Name Type Diagram Vlv. Pos. Technical Data Note(s)
MBH40BP002 Orifice ORF 3.1-2210 {1.5mm}
MBK21AU001MK01 Clutch CPLD 3.1-8010
MBK22AE001 Turning Gear HYMO 3.1-8010 [PN:108bar]
Gas Turbine
Power Generation
Technical Data
Siemens AG
MBM10AA371 Shut-off Valve SV 3.1-3010 O [PN:250bar; NomW:10mm]
MBM10AA501 Shut-off Valve SV 3.1-3010 O [PN:250bar; NomW:10mm]
MBM10AA502 Shut-off Valve SV 3.1-3010 O [PN:250bar; NomW:10mm]
MBM10AV001 Combustion Chamber CC 3.1-3010
MBM12AV001KV01 Burner BURN 3.1-3010
MBM12AV002KV01 Burner BURN 3.1-3010
MBM12AV003KV01 Burner BURN 3.1-3010
MBM12AV004KV01 Burner BURN 3.1-3010
MBM12AV005KV01 Burner BURN 3.1-3010
MBM12AV006KV01 Burner BURN 3.1-3010
MBM12AV007KV01 Burner BURN 3.1-3010
MB
MBM12AV008KV01 Burner BURN 3.1-3010
MBM12AV009KV01 Burner BURN 3.1-3010
MBM12AV010KV01 Burner BURN 3.1-3010
MBM12AV011KV01 Burner BURN 3.1-3010
MBM12AV012KV01 Burner BURN 3.1-3010
Equipment List
0106E-X
3.1-0240-0592/4
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Tag No. Name Type Diagram Vlv. Pos. Technical Data Note(s)
MBM12AV024KV01 Burner BURN 3.1-3010
MBN11AA211 Check Valve CKV 3.1-4010
MBN11AA212 Check Valve CKV 3.1-4010
Gas Turbine
Power Generation
Technical Data
Siemens AG
MBN11AA256 Shut-off Cock SV 3.1-4010 C
MBN11AA301 Shut-off Valve SV 3.1-4010 O
MBN11AA341 Shut-off Valve SV 3.1-4010 O
MBN11AA371 Shut-off Valve SV 3.1-4010 O
MBN11AA401 Drain Valve BV 3.1-4010 C
MBN11AA402 Drain Valve BV 3.1-4010 C
MBN11AA408 Drain Valve SV 3.1-4010 C
MBN11AA409 Drain Valve SV 3.1-4010 C
MBN11AA501 Vent, Fuel Oil Filter BV 3.1-4010 C
MBN11AA502 Vent, Fuel Oil Filter BV 3.1-4010 C
MBN11AA503 Vent, Fuel Oil Filter BV 3.1-4010 C
MB
MBN11AT001 Fuel Oil Filter FILT 3.1-4010
MBN11AT002 Fuel Oil Filter FILT 3.1-4010
MBN11BB001 Accumulator PAC 3.1-4010
MBN11BB002 Accumulator PAC 3.1-4010
MBN11BP001 Orifice ORF 3.1-4010
Equipment List
0106E-X
3.1-0240-0592/5
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Tag No. Name Type Diagram Vlv. Pos. Technical Data Note(s)
MBN12AA301 Shut-off Valve SV 3.1-4010 O
MBN12AA302 Shut-off Valve SV 3.1-4010 O
MBN12AA303 Shut-off Valve SV 3.1-4010 O
Gas Turbine
Power Generation
Technical Data
Siemens AG
MBN12AA318 Shut-off Valve SV 3.1-4010 O
MBN12AA401 Drain Valve BV 3.1-4010 C
MBN12AA404 Drain Valve SV 3.1-4010 C
MBN12AP001KP01 Fuel Oil Injection Pump CTRP 3.1-4010
MBN12AP002KP01 Fuel Oil Injection Pump CTRP 3.1-4010
MBN12BP004 Orifice ORF 3.1-4010
MBN12BP006 Orifice ORF 3.1-4010
MBN13AA181 Tank shut off valve PLV 3.1-4010
MBN13AA301 Shut-off Valve SV 3.1-4010
MBN13AA302 Shut-off Valve SV 3.1-4010
MBN13AA303 Shut-off Valve SV 3.1-4010
MB
MBN13AA401 Purge Water Ball Cock BV 3.1-4010 C
MBN14AA051KA01 FO Diffusion ESV ESV 3.1-4010 [PN:160bar; NomW:100mm]
MBN14AA151KA01 FO Diffusion CV CV 3.1-4010 [PN:160bar; NomW:100mm]
MBN14AA301 Shut-off Valve SV 3.1-4010 O
MBN14AA303 Shut-off Valve SV 3.1-4010 O
Equipment List
0106E-X
3.1-0240-0592/6
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Tag No. Name Type Diagram Vlv. Pos. Technical Data Note(s)
MBN31AA252 Shut-off Valve BV 3.1-4010 C
MBN31AA253 Shut-off Valve SV 3.1-4010 C
MBN31AA341 Shut-off Cock SV 3.1-4010 O
Gas Turbine
Power Generation
Technical Data
Siemens AG
MBN31AA402 Drain Valve BV 3.1-4010 C
MBN31AA403 Drain Valve SV 3.1-4010 C
MBN31AA404 Drain Valve SV 3.1-4010 C
MBN31AA501 Ball Valve BV 3.1-4010
MBN31AA502 Ball Valve BV 3.1-4010 C
MBN31AT001 Filter FILT 3.1-4010
MBN31AT002 Filter ORF 3.1-4010
MBN31BP001 Orifice ORF 3.1-4010
MBN33AM001 Mixer TANK 3.1-4010 [FillPres:160bar]
MBN34AA002KA01 Leakoil Valve SV 3.1-4010
MBN34AA051KA01 Seal Air Ball Cock BV 3.1-4010 [PN:160bar; NomW:50mm]
MB
MBN34AA301 Shut-off Valve SV 3.1-4010 O
MBN34AA302 Shut-off Valve SV 3.1-4010 O
MBN34AA303 Shut-off Valve SV 3.1-4010 O
MBN34AA304 Shut-off Valve SV 3.1-4010 O
MBN34AA305 Shut-off Valve SV 3.1-4010 O
Equipment List
0106E-X
3.1-0240-0592/7
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Tag No. Name Type Diagram Vlv. Pos. Technical Data Note(s)
MBN36AA211 Check Valve CKV 3.1-4010 [PN:100bar; NomW:20mm]
MBN36AA212 Check Valve CKV 3.1-4010 [PN:100bar; NomW:20mm]
MBN36AA213 Check Valve CKV 3.1-4010 [PN:100bar; NomW:20mm]
Gas Turbine
Power Generation
Technical Data
Siemens AG
MBN36AA216 Check Valve CKV 3.1-4010 [PN:100bar; NomW:20mm]
MBN36AA217 Check Valve CKV 3.1-4010 [PN:100bar; NomW:20mm]
MBN36AA218 Check Valve CKV 3.1-4010 [PN:100bar; NomW:20mm]
MBN36AA219 Check Valve CKV 3.1-4010 [PN:100bar; NomW:20mm]
MBN36AA220 Check Valve CKV 3.1-4010 [PN:100bar; NomW:20mm]
MBN36AA221 Check Valve CKV 3.1-4010 [PN:100bar; NomW:20mm]
MBN36AA222 Check Valve CKV 3.1-4010 [PN:100bar; NomW:20mm]
MBN36AA223 Check Valve CKV 3.1-4010 [PN:100bar; NomW:20mm]
MBN36AA224 Check Valve CKV 3.1-4010 [PN:100bar; NomW:20mm]
MBN36AA301 Shut-off Valve SV 3.1-4010 O
MBN36AA305 Shut-off Valve SV 3.1-4010 O
MB
MBN36BP001 Orifice ORF 3.1-4010 [Orifice:2mm; NomW:24mm]
MBN41AA251 Change-over Valve TRV 3.1-4010
MBN41AA252 Shut-off Valve SV 3.1-4010 C
MBN41AA253 Shut-off Valve SV 3.1-4010 C
MBN41AA341 Shut-off Cock SV 3.1-4010 O {isolating valve}
Equipment List
0106E-X
3.1-0240-0592/8
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Tag No. Name Type Diagram Vlv. Pos. Technical Data Note(s)
MBN44AA002KA01 Leakoil Valve SV 3.1-4010
MBN44AA051KA01 Seal Air Ball Cock BV 3.1-4010 [PN:160bar; NomW:50mm]
MBN44AA301 Shut-off Valve SV 3.1-4010 O
Gas Turbine
Power Generation
Technical Data
Siemens AG
MBN44AA304 Shut-off Valve SV 3.1-4010 O
MBN44AA305 Shut-off Valve SV 3.1-4010 O
MBN44BP001 Leakoil Orifice ORF 3.1-4010 {5mm}[Orifice:5mm; NomW:8mm]
MBN45AA301 Shut-off Valve SOVC 3.1-4010
MBN45AA401KA01 Fuel Oil Drain SV 3.1-4010
MBN45AA402KA01 Fuel Oil Drain SV 3.1-4010
MBN45AA501KA01 Shut-off Valve SOVC 3.1-4010
MBN45BP001 Orifice ORF 3.1-4010
MBN52AA051KA01 Fuel Oil Return ESV ESV 3.1-4010 [PN:160bar; NomW:100mm]
MBN52AA301 Shut-off Valve SV 3.1-4010 O
MBN52AA401 Drain Valve BV 3.1-4010 C
MB
MBN52AA501KA01 Shut-off Valve SV 3.1-4010
MBN52BP001 Orifice ORF 3.1-4010
MBN53AA151KA01 FO Diffusion CV CV 3.1-4010 [PN:160bar; NomW:100mm]
MBN54AA302 Shut-off Cock SV 3.1-4010 O
MBN54AA303 Shut-off Cock SV 3.1-4010 O
Equipment List
0106E-X
3.1-0240-0592/9
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Tag No. Name Type Diagram Vlv. Pos. Technical Data Note(s)
MBN80AA251 Shut-off Valve SOVC 3.1-4810 O
MBN80AA301 Shut-off Valve SV 3.1-4810 O
MBN80AA401 Drain Valve SOVC 3.1-4810 C
Gas Turbine
Power Generation
Technical Data
Siemens AG
MBN81AA151 Control Valve PCV 3.1-4810 {21bar}
MBN81AA191 Pressure Relief Valve PLV 3.1-4810 {25bar}
MBN81AA251 Shut-off Valve SV 3.1-4810
MBN81AA301 Shut-off Valve SV 3.1-4810 O
MBN81AA302 Shut-off Valve SV 3.1-4810
MBN81AA303 Shut-off Valve SV 3.1-4810
MBN81AP001KP01 Purge Water Pump PDP 3.1-4810
MBN81AT001 Strainer DITR 3.1-4810
MBN82AA301 Shut-off Valve SV 3.1-4810 O
MBN83AA051AKA01 Purge Water Pre Ctrl Valve SV 3.1-4810 [PN:160bar; NomW:25mm]
MBN83AA051KA01 Purge Water Valve SV 3.1-4810 [PN:160bar; NomW:25mm]
MB
MBN83AA052AKA01 Purge Water Pre Ctrl Valve SV 3.1-4810 [PN:160bar; NomW:25mm]
MBN83AA052KA01 Purge Water Valve SV 3.1-4810 [PN:160bar; NomW:25mm]
MBN83AA053AKA01 Purge Water Pre Ctrl Valve SV 3.1-4810 [PN:160bar; NomW:25mm]
MBN83AA053KA01 Purge Water Valve SV 3.1-4810 [PN:160bar; NomW:25mm]
MBN83AA054AKA01 Purge Water Pre Ctrl Valve SV 3.1-4810 [PN:160bar; NomW:25mm]
Equipment List
0106E-X
3.1-0240-0592/10
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Tag No. Name Type Diagram Vlv. Pos. Technical Data Note(s)
MBN83BS013 Silencer SIL 3.1-4810
MBN83BS014 Silencer SIL 3.1-4810
MBN84AA051AKA01 Purge Water Pre Ctrl Valve SV 3.1-4810 [PN:160bar; NomW:25mm]
Gas Turbine
Power Generation
Technical Data
Siemens AG
MBN84AA052KA01 Purge Water Valve SV 3.1-4810 [PN:160bar; NomW:25mm]
MBN84BP001 Orifice ORF 3.1-4810
MBN84BS001 Silencer SIL 3.1-4810
MBN84BS002 Silencer SIL 3.1-4810
MBN84BS011 Silencer SIL 3.1-4810
MBN84BS012 Silencer SIL 3.1-4810
MBP11AT001 Fuel Gas Strainer STR 3.1-5010
MBP13AA051KA01 Fuel Gas ESV ESV 3.1-5010 [PN:63bar; NomW:250mm]
MBP13AA301 Shut-off Valve SV 3.1-5010 O
MBP13AA302 Shut-off Valve SV 3.1-5010 O
MBP13AA303 Shut-off Valve SV 3.1-5010 O
MB
MBP13AA304 Shut-off Valve SV 3.1-5010 O
MBP13AA305 Shut-off Valve SV 3.1-5010 O
MBP13AA306 Shut-off Valve SV 3.1-5010 O
MBP13AA501KA01 Fuel Gas Vent SV 3.1-5010
MBP14AA301 Shut-off Valve SV 3.1-5010 O
Equipment List
0106E-X
3.1-0240-0592/11
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Tag No. Name Type Diagram Vlv. Pos. Technical Data Note(s)
MBP32BP002 Premix Orifice ORF 3.1-5010 [Orifice:20.4mm; PN:100bar; NomW:39mm]
MBP32BP003 Premix Orifice ORF 3.1-5010 [Orifice:20.4mm; PN:100bar; NomW:39mm]
MBP32BP004 Premix Orifice ORF 3.1-5010 [Orifice:20.4mm; PN:100bar; NomW:39mm]
Gas Turbine
Power Generation
Technical Data
Siemens AG
MBP32BP007 Premix Orifice ORF 3.1-5010 [Orifice:20.4mm; PN:100bar; NomW:39mm]
MBP32BP008 Premix Orifice ORF 3.1-5010 [Orifice:20.4mm; PN:100bar; NomW:39mm]
MBP32BP009 Premix Orifice ORF 3.1-5010 [Orifice:20.4mm; PN:100bar; NomW:39mm]
MBP32BP010 Premix Orifice ORF 3.1-5010 [Orifice:20.4mm; PN:100bar; NomW:39mm]
MBP32BP011 Premix Orifice ORF 3.1-5010 [Orifice:20.4mm; PN:100bar; NomW:39mm]
MBP32BP012 Premix Orifice ORF 3.1-5010 [Orifice:20.4mm; PN:100bar; NomW:39mm]
MBP32BP013 Premix Orifice ORF 3.1-5010 [Orifice:20.4mm; PN:100bar; NomW:39mm]
MBP32BP014 Premix Orifice ORF 3.1-5010 [Orifice:20.4mm; PN:100bar; NomW:39mm]
MBP32BP015 Premix Orifice ORF 3.1-5010 [Orifice:20.4mm; PN:100bar; NomW:39mm]
MBP32BP016 Premix Orifice ORF 3.1-5010 [Orifice:20.4mm; PN:100bar; NomW:39mm]
MBP32BP017 Premix Orifice ORF 3.1-5010 [Orifice:20.4mm; PN:100bar; NomW:39mm]
MB
MBP32BP018 Premix Orifice ORF 3.1-5010 [Orifice:20.4mm; PN:100bar; NomW:39mm]
MBP32BP019 Premix Orifice ORF 3.1-5010 [Orifice:20.4mm; PN:100bar; NomW:39mm]
MBP32BP020 Premix Orifice ORF 3.1-5010 [Orifice:20.4mm; PN:100bar; NomW:39mm]
MBP32BP021 Premix Orifice ORF 3.1-5010 [Orifice:20.4mm; PN:100bar; NomW:39mm]
MBP32BP022 Premix Orifice ORF 3.1-5010 [Orifice:20.4mm; PN:100bar; NomW:39mm]
Equipment List
0106E-X
3.1-0240-0592/12
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Tag No. Name Type Diagram Vlv. Pos. Technical Data Note(s)
MBQ11AA001KA01 Ignition Gas Valve 1 SV 3.1-6010
MBQ11AA251 Shut-off Valve BV 3.1-6010 O
MBQ12AA151 Control Valve PCV 3.1-6010 {2bar}
Gas Turbine
Power Generation
Technical Data
Siemens AG
MBQ13AA201 Check Valve CKV 3.1-6010 [NomW:25mm]
MBQ13AA251 Shut-off Cock BV 3.1-6010 O
MBQ13AA501KA01 Ignition Gas Vent SV 3.1-6010
MBU24AA251 Shut-off Valve SV 3.1-7010 O
MBU24AA254 Shut-off Valve SV 3.1-7010
MBU24AA301 Shut-off Valve SV 3.1-7010
MBU24AA341 Shut-off Valve SV 3.1-7010 O
MBU24AA371 Shut-off Valve SV 3.1-7010 O
MBU24AA401 Drain Valve SV 3.1-7010 C
MBU24AA403 Drain Valve SV 3.1-7010
MBU24AA404 Drain Valve SV 3.1-7010
MB
MBU24AA501 Release Valve SV 3.1-7010 C
MBU24AT001 Nox Water Filter FILT 3.1-7010
MBU25AA051 Minimum Flow Valve ARC 3.1-7010
MBU25AA052 Minimum Flow Valve ARC 3.1-7010
MBU25AA201 Check Valve CKV 3.1-7010
Equipment List
0106E-X
3.1-0240-0592/13
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Tag No. Name Type Diagram Vlv. Pos. Technical Data Note(s)
MBU25AA314 Shut-off Valve SV 3.1-7010 O
MBU25AA316 Shut-off Valve SV 3.1-7010
MBU25AA317 Shut-off Valve SV 3.1-7010
Gas Turbine
Power Generation
Technical Data
Siemens AG
MBU25AP001KP01 Nox Water Pump 1 CTRP 3.1-7010
MBU25AP002KP01 Nox Water Pump 2 CTRP 3.1-7010
MBU32AA401 Shut-off Cock SV 3.1-7010 C
MBU32BB001 Header TANK 3.1-7010
MBU41AA051KA01 HP-DM-Emulsion ESV ESV 3.1-7010 [PN:160bar; NomW:80mm]
MBU41AA052KA01 Release Valve SV 3.1-7010
MBU41AA151KA01 HP-DM-Emulsion CV CV 3.1-7010 [PN:160bar; NomW:80mm]
MBU41AA301 Shut-off Valve SV 3.1-7010 O
MBU41AA302 Shut-off Valve SV 3.1-7010
MBU41BP001 Orifice ORF 3.1-7010
MBU43AA201 Check Valve CKV 3.1-7010 [PN:160bar; NomW:80mm]
MB
MBU46AA051KA01 HP-PM-Emulsion ESV ESV 3.1-7010 [PN:160bar; NomW:80mm]
MBU46AA052KA01 Release Valve SV 3.1-7010
MBU46AA151KA01 HP-PM-Emulsion CV CV 3.1-7010 [PN:160bar; NomW:80mm]
MBU46AA301 Shut-off Valve SV 3.1-7010 O
MBU46AA302 Shut-off Valve SV 3.1-7010
Equipment List
0106E-X
3.1-0240-0592/14
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Tag No. Name Type Diagram Vlv. Pos. Technical Data Note(s)
MBV21AA307 Shut-off Valve SV 3.1-8010 O
MBV21AA308 Shut-off Valve SV 3.1-8010 O
MBV21AA309 Shut-off Valve SV 3.1-8010 O
Gas Turbine
Power Generation
Technical Data
Siemens AG
MBV21AA403 Drain Valve BV 3.1-8010 C
MBV21AA404 Drain Valve SV 3.1-8010 O
MBV21AA405 Drain Valve SV 3.1-8010 O
MBV21AP001KP01 Main Lube Oil Pump CTRP 3.1-8010
MBV21AP002KP01 Auxiliary Oil Pump CTRP 3.1-8010
MBV21AP003KP01 Emergency Oil Pump CTRP 3.1-8010
MBV21BP003 Orifice ORF 3.1-8010
MBV21BP004 Orifice ORF 3.1-8010
MBV21BP005 Orifice ORF 3.1-8010
MBV21BP006 Orifice ORF 3.1-8010
MBV22AA281 Bypass Orifice ORFA 3.1-8010
MB
MBV23AC Lube Oil Cooler 3.1-8010
MBV24AA151 Temperature Control TCV 3.1-8010
MBV24AA281 Main Lubeoil Throttle ORFA 3.1-8010
MBV24AA301 Shut-off Valve SOVC 3.1-8010 O
MBV25AA201 Check Valve CKF 3.1-8010 {with remachining in accordance with Gestra drawing: 4SKF2529}
Equipment List
MBV25AA251 Change-over Valve TRV 3.1-8010 {Vlv.Pos.: 1-2, 3 closed or 1-3, 2 closed}
Limits and Settings
0106E-X
3.1-0240-0592/15
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Tag No. Name Type Diagram Vlv. Pos. Technical Data Note(s)
MBV26AA304 Shut-off Valve SOVC 3.1-8010 O
MBV26AA305 Shut-off Cock SV 3.1-8010 O
MBV26AA306 Shut-off Valve SOVC 3.1-8010 O
Gas Turbine
Power Generation
Technical Data
Siemens AG
MBV26AA309 Shut-off Valve SOVC 3.1-8010 O
MBV26AA310 Shut-off Valve SOVC 3.1-8010 O
MBV26AA401 Drain Valve BV 3.1-8010 C
MBV26BP011 Bearing Oil Orifice ORF 3.1-8010
MBV26BP012 Bearing Oil Orifice ORF 3.1-8010
MBV26BP013 Bearing Oil Orifice ORF 3.1-8010
MBV26BP014 Bearing Oil Orifice ORF 3.1-8010
MBV26BP015 Bearing Oil Orifice ORF 3.1-8010
MBV30AA191 Pressure Relief Valve PLV 3.1-8010
MBV30AA192 Pressure Relief Valve PLV 3.1-8010
MBV30AA201 Check Valve CKF 3.1-8010
MB
MBV30AA202 Check Valve CKF 3.1-8010
MBV30AA203 Check Valve CKF 3.1-8010
MBV30AA204 Check Valve CKF 3.1-8010
MBV30AA251 Change-over Valve SOVC 3.1-8010
MBV30AA301 Shut-off Valve SV 3.1-8010 O
Equipment List
0106E-X
3.1-0240-0592/16
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Tag No. Name Type Diagram Vlv. Pos. Technical Data Note(s)
MBV30AA313 Shut-off Valve SV 3.1-8010 O
MBV30AA314 Shut-off Valve SV 3.1-8010 O
MBV30AA315 Shut-off Valve SV 3.1-8010 O
Gas Turbine
Power Generation
Technical Data
Siemens AG
MBV30AP001KP01 Lifting Oil Pump PDP 3.1-8010
MBV30AP002KP01 Lifting Oil Pump PDP 3.1-8010
MBV30AT001 Lifting Oil Filter FILT 3.1-8010
MBV30AT002 Lifting Oil Filter FILT 3.1-8010
MBV31AA151 Control Valve PLV 3.1-8010 {160bar}
MBV31AA201 Check Valve CKV 3.1-8010
MBV31AA202 Check Valve CKV 3.1-8010
MBV31AA281 Lift-oil Throttle Valve THRV 3.1-8010
MBV31AA282 Lift-oil Throttle Valve THRV 3.1-8010
MBV31AA301 Shut-off Valve SV 3.1-8010 O
MBV31AA302 Shut-off Valve SV 3.1-8010 O
MB
MBV35AA001KA01 Clutch Valve SV 3.1-8010 [PN:420bar; NomW:6mm]
MBV35AA002KA01 Clutch Valve SV 3.1-8010 [PN:420bar; NomW:6mm]
MBV35AA003KA01 Shut-off Valve SV 3.1-8010 [PN:280bar; NomW:10mm]
MBV35AA101KA01 Control Valve FCV 3.1-8010 {Turning Speed = 100-120rpm}[PN:315bar; NomW:16mm]
MBV35AA151 Flow Control Valve FCV 3.1-8010
Equipment List
0106E-X
3.1-0240-0592/17
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Tag No. Name Type Diagram Vlv. Pos. Technical Data Note(s)
MBX01AA401 Drain Valve BV 3.1-9010 C
MBX01AT001 Hyd Filter1 FILT 3.1-9010
MBX01BB001 Hydraulic Tank TANK 3.1-9010
Gas Turbine
Power Generation
Technical Data
Siemens AG
MBX02AA193 Pressure Relief Valve PLV 3.1-9010
MBX02AA194 Pressure Relief Valve PLV 3.1-9010
MBX02AA301 Shut-off Valve SV 3.1-9010 O
MBX02AA302 Shut-off Valve SV 3.1-9010 O
MBX02AA303 Shut-off Valve SV 3.1-9010
MBX02AA304 Shut-off Valve SV 3.1-9010 O
MBX02AA321 Shut-off Valve CBM 3.1-9010
MBX02AA322 Shut-off Valve CBM 3.1-9010
MBX02AP001KP01 Hydraulic Pump PDP 3.1-9010
MBX02AP002KP01 Hydraulic Pump PDP 3.1-9010
MBX03AA201 Check Valve CKV 3.1-9010
MB
MBX03AA202 Check Valve CKV 3.1-9010
MBX03AA251 Filter Shut-off Valve SOVC 3.1-9010 O
MBX03AA252 Filter Shut-off Valve SOVC 3.1-9010 O
MBX03AA253 Filter Shut-off Valve SOVC 3.1-9010 O
MBX03AA254 Filter Shut-off Valve SOVC 3.1-9010 O
Equipment List
0106E-X
3.1-0240-0592/18
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Tag No. Name Type Diagram Vlv. Pos. Technical Data Note(s)
MBX04AA252 Tank shut off valve SV 3.1-9010 O
MBX04AA301 Shut-off Valve SV 3.1-9010 O
MBX04AA302 Shut-off Valve SV 3.1-9010 O
Gas Turbine
Power Generation
Technical Data
Siemens AG
MBX04AA401 Accumulator Drain SV 3.1-9010 C
MBX04AA402 Accumulator Drain SV 3.1-9010 C
MBX04BB001 Pressure Accumulator PAC 3.1-9010
MBX04BB002 Pressure Accumulator PAC 3.1-9010
MBX06AA191 Hyd Cooling Circuit CKV 3.1-9010
MBX06AA192 Hyd Cooling Circuit CKV 3.1-9010
MBX06AA195 Check Valve CKV 3.1-9010
MBX06AA196 Check Valve CKV 3.1-9010
MBX06AA201 Check Valve CKV 3.1-9010
MBX06AA202 Check Valve CKV 3.1-9010
MBX06AA203 Check Valve CKV 3.1-9010
MB
MBX06AA204 Check Valve CKV 3.1-9010
MBX06AA205 Check Valve CKV 3.1-9010
MBX06AA206 Check Valve CKV 3.1-9010
MBX06AA251 Shut-off Valve BV 3.1-9010 O
MBX06AA252 Shut-off Valve BV 3.1-9010 C
Equipment List
0106E-X
3.1-0240-0592/19
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Tag No. Name Type Diagram Vlv. Pos. Technical Data Note(s)
MBX06AH002KC01 Hyd Cooler COOL 3.1-9010
MBX06AP001 Hyd Pump1 Cool Circ PDP 3.1-9010
MBX06AP002 Hyd Pump2 Cool Circ PDP 3.1-9010
Gas Turbine
Power Generation
Technical Data
Siemens AG
MBX21AA191 Pressure Relief Valve PRLV 3.1-9810 {11bar}
MBX21AA192 Pressure Relief Valve PRLV 3.1-9810 {11bar}
MBX21AA201 Check Valve CKF 3.1-9810
MBX21AA202 Check Valve CKF 3.1-9810
MBX21AA501KA01 Release Valve SV 3.1-9810
MBX21AA502KA01 Release Valve SV 3.1-9810
MBX21AN001KN01 Pneumatic Compressor COMP 3.1-9810
MBX21AN002KN01 Pneumatic Compressor COMP 3.1-9810
MBX21AT001 Suction Filter FILT 3.1-9810
MBX21AT002 Suction Filter FILT 3.1-9810
MBX22AA201 Check Valve CKV 3.1-9810
MB
MBX22AA251 Shut-off Valve SOVC 3.1-9810 O
MBX22AA252 Shut-off Valve SOVC 3.1-9810 O
MBX22AA253 Shut-off Valve SOVC 3.1-9810
MBX22AA254 Shut-off Valve SOVC 3.1-9810
MBX22AT001KT01 Pneumatic Dryer DEHUM 3.1-9810
Equipment List
0106E-X
3.1-0240-0592/20
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Tag No. Name Type Diagram Vlv. Pos. Technical Data Note(s)
MBX24AA151 Sustaining Valve PLV 3.1-9810
MBX24AA191 Pressure Relief Valve PRLV 3.1-9810 {10bar}
MBX24AA301 Shut-off Valve SOVC 3.1-9810 O
Gas Turbine
Power Generation
Technical Data
Siemens AG
MBX24AA304 Shut-off Valve SOVC 3.1-9810 O
MBX24AA305 Shut-off Valve SOVC 3.1-9810 O
MBX24AA308 Shut-off Valve SOVC 3.1-9810 O
MBX24AA401 Drain Valve SOVC 3.1-9810 C
MBX24BB001 Pneumatic Accumulator PAC 3.1-9810
MBX24BP001 Orifice ORF 3.1-9810
MBX50AA001KA01 Pre Control Valve CTCV 3.1-9310 [PN:350bar; NomW:6mm]
MBX50AA031KA01 Opening Valve CTCV 3.1-9310 [PN:350bar; NomW:6mm]
MBX50AA051 Cartridge Valve SV 3.1-9310 [PN:315bar; NomW:16mm]
MBX50AA321 Shut-off Valve CBM 3.1-9310 C
MBX50AA322 Shut-off Valve CBM 3.1-9310 C
MB
MBX50AA323 Shut-off Valve CBM 3.1-9310 C
MBX50AA324 Shut-off Valve CBM 3.1-9310 C
MBX50AS001 Actuator Control Unit COPL 3.1-9310
MBX50AS002 Actuator Piston ACT 3.1-9310
MBX50AT002 Filter FILT 3.1-9310 [MashW:0.01mm; PN:315bar]
Equipment List
0106E-X
3.1-0240-0592/21
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Tag No. Name Type Diagram Vlv. Pos. Technical Data Note(s)
MBX51AS002 Actuator Piston ACT 3.1-9310
MBX51AT002 Filter FILT 3.1-9310 [MashW:0.01mm; PN:315bar]
MBX51BP001 Throttle Valve ORF 3.1-9310
Gas Turbine
Power Generation
Technical Data
Siemens AG
MBX60AA002KA01 Pre Control Valve CTCV 3.1-9310 [PN:350bar]
MBX60AA052 Cartridge Valve SV 3.1-9310 [PN:315bar; NomW:16mm]
MBX60AA101KA01 Servo Valve SDV 3.1-9310 [PN:315bar; NomW:6mm]
MBX60AA321 Shut-off Valve CBM 3.1-9310 C
MBX60AA322 Shut-off Valve CBM 3.1-9310 C
MBX60AA323 Shut-off Valve CBM 3.1-9310 C
MBX60AA324 Shut-off Valve CBM 3.1-9310 C
MBX60AS001 Actuator Control Unit ACT 3.1-9310
MBX60AS002 Actuator Piston ACT 3.1-9310
MBX60AT002 Filter FILT 3.1-9310 [MashW:0.01mm; PN:315bar]
MBX60BP001 Throttle Valve ORF 3.1-9310
MB
MBX61AA002KA01 Pre Control Valve CTCV 3.1-9310 [PN:350bar]
MBX61AA052 Cartridge Valve SV 3.1-9310 [PN:315bar; NomW:16mm]
MBX61AA101KA01 Servo Valve SDV 3.1-9310 [PN:315bar; NomW:6mm]
MBX61AA321 Shut-off Valve CBM 3.1-9310 C
MBX61AA322 Shut-off Valve CBM 3.1-9310 C
Equipment List
0106E-X
3.1-0240-0592/22
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Tag No. Name Type Diagram Vlv. Pos. Technical Data Note(s)
MBX69BS003 Silencer SIL 3.1-7010
MBX69BS004 Silencer SIL 3.1-7010
MBX70AA001KA01 Pre Control Valve CTCV 3.1-9210 [PN:350bar; NomW:6mm]
Gas Turbine
Power Generation
Technical Data
Siemens AG
MBX70AA321 Shut-off Valve CBM 3.1-9210 {Feed Line Pressure}
MBX70AA322 Shut-off Valve CBM 3.1-9210 {Pressure at Actuator, Direction Open}
MBX70AA323 Shut-off Valve CBM 3.1-9210 {Pressure at Actuator, Direction Close}
MBX70AA324 Shut-off Valve CBM 3.1-9210 {Return Line Pressure}
MBX70AS001 Actuator Control Unit COPL 3.1-9210
MBX70AS002 Actuator Piston ACT 3.1-9210
MBX70AT002 Filter FILT 3.1-9210 [MashW:0.01mm; PN:315bar]
MBX70BP001 Throttle ORF 3.1-9210 {Opening Velocity}
MBX70BP002 Throttle ORF 3.1-9210 {Opening Velocity}
MBX70BP003 Throttle ORF 3.1-9210 {Opening Velocity}
MBX75AA001KA01 Pre Control Valve CTCV 3.1-9110 [PN:350bar]
MB
MBX75AA031KA01 Opening Valve CTCV 3.1-9110 [PN:350bar; NomW:6mm]
MBX75AA051 Cartridge Valve SV 3.1-9110 [PN:315bar; NomW:16mm]
MBX75AA321 Shut-off Valve CBM 3.1-9110 {Feed Line Pressure}
MBX75AA322 Shut-off Valve CBM 3.1-9110 {Pressure at Actuator, Direction Open}
MBX75AA323 Shut-off Valve CBM 3.1-9110 {Pressure at Actuator, Direction Close}
Equipment List
0106E-X
3.1-0240-0592/23
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Tag No. Name Type Diagram Vlv. Pos. Technical Data Note(s)
MBX77AA322 Shut-off Valve CBM 3.1-9110 {Pressure at Actuator, Direction Open}
MBX77AA323 Shut-off Valve CBM 3.1-9110 {Pressure at Actuator, Direction Close}
MBX77AA324 Shut-off Valve CBM 3.1-9110 {Return Line Pressure}
Gas Turbine
Power Generation
Technical Data
Siemens AG
MBX77AT002 Filter FILT 3.1-9110 [MashW:0.01mm; PN:315bar]
MBX77BP001 Throttle ORF 3.1-9110 {Opening Velocity}
MBX77BP002 Throttle ORF 3.1-9110 {Closing Velocity}
MBX77BP003 Throttle ORF 3.1-9110 {Closing Velocity}
MBX79AA002KA01 Pre Control Valve CTCV 3.1-9110 [PN:350bar; NomW:6mm]
MBX79AA321 Shut-off Valve CBM 3.1-9110 {Feed Line Pressure}
MBX79AA322 Shut-off Valve CBM 3.1-9110 {Pressure at Actuator, Direction Open}
MBX79AA324 Shut-off Valve CBM 3.1-9110 {Return Line Pressure}
MBX79AS001 Actuator Control Unit COPL 3.1-9110
MBX79AS002 Actuator Piston ACT 3.1-9110
MBX79AT002 Filter FILT 3.1-9110 [MashW:0.01mm; PN:315bar]
MB
MBX79BP001 Throttle ORF 3.1-9110 {Opening Velocity}
MBX79BP002 Throttle ORF 3.1-9110 {Closing Velocity}
MBX80AA002KA01 Pre Control Valve CTCV 3.1-9210 [PN:350bar]
MBX80AA052 Transfer Valve SV 3.1-9210 [PN:315bar; NomW:16mm]
MBX80AA101KA01 Servo Valve SDV 3.1-9210 [PN:315bar; NomW:6mm]
Equipment List
0106E-X
3.1-0240-0592/24
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Tag No. Name Type Diagram Vlv. Pos. Technical Data Note(s)
MBX81AA321 Shut-off Valve CBM 3.1-9210 {Feed Line Pressure}
MBX81AA322 Shut-off Valve CBM 3.1-9210 {Pressure at Actuator, Direction Open}
MBX81AA323 Shut-off Valve CBM 3.1-9210 {Pressure at Actuator, Direction Close}
Gas Turbine
Power Generation
Technical Data
Siemens AG
MBX81AS002 Actuator Piston ACT 3.1-9210
MBX81AT002 Filter FILT 3.1-9210 [MashW:0.01mm; PN:315bar]
MBX81BP001 Throttle Valve ORF 3.1-9210 [Orifice:3.5mm]
MBX82AA002KA01 Pre Control Valve CTCV 3.1-9210 [PN:350bar; NomW:10mm]
MBX82AA101KA01 Servo Valve SDV 3.1-9210 [PN:315bar; NomW:6mm]
MBX82AA321 Shut-off Valve CBM 3.1-9210 {Feed Line Pressure}
MBX82AA322 Shut-off Valve CBM 3.1-9210 {Pressure at Actuator, Direction Open}
MBX82AA324 Shut-off Valve CBM 3.1-9210 {Return Line Pressure}
MBX82AS001 Actuator Control Unit COPL 3.1-9210
MBX82AS002 Actuator Piston ACT 3.1-9210
MBX82AT002 Filter FILT 3.1-9210 [MashW:0.01mm; PN:315bar]
MB
MBX82BP001 Throttle Valve ORF 3.1-9210 [Orifice:1.5mm]
MBX86AA101KA01 Servo Valve SDV 3.1-9110 [PN:315bar; NomW:6mm]
MBX86AA321 Shut-off Valve CBM 3.1-9110 {Feed Line Pressure}
MBX86AA322 Shut-off Valve CBM 3.1-9110 {Pressure at Actuator, Direction Open}
MBX86AA324 Shut-off Valve CBM 3.1-9110 {Return Line Pressure}
Equipment List
0106E-X
3.1-0240-0592/25
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Tag No. Name Type Diagram Vlv. Pos. Technical Data Note(s)
MBX87AS002 Actuator Piston ACT 3.1-9110
MBX87AT002 Filter FILT 3.1-9110 [MashW:0.01mm; PN:315bar]
MBX87BP001 Throttle ORF 3.1-9110
Gas Turbine
Power Generation
Technical Data
Siemens AG
MBX88AA101KA01 Servo Valve SDV 3.1-9110 [PN:315bar; NomW:6mm]
MBX88AA321 Shut-off Valve CBM 3.1-9110 {Feed Line Pressure}
MBX88AA322 Shut-off Valve CBM 3.1-9110 {Pressure at Actuator, Direction Open}
MBX88AA323 Shut-off Valve CBM 3.1-9110 {Pressure at Actuator, Direction Close}
MBX88AA324 Shut-off Valve CBM 3.1-9110 {Return Line Pressure}
MBX88AS001 Actuator Control Unit COPL 3.1-9110
MBX88AS002 Actuator Piston ACT 3.1-9110
MBX88AT002 Filter FILT 3.1-9110 [MashW:0.01mm; PN:315bar]
MBX88BP001 Throttle ORF 3.1-9110 {Closing Velocity}
MBX90AA001KA01 Change-over Valve SV 3.1-9910
MBX90AS001 Pneumatic Actuator ACT 3.1-9910
MB
MBX90BS001 Silencer SIL 3.1-9910
MBX90BS002 Silencer SIL 3.1-9910
MBX91AA001KA01 Change-over Valve SV 3.1-9910
MBX91AS001 Pneumatic Actuator ACT 3.1-9910
MBX91BS001 Silencer SIL 3.1-9910
Equipment List
0106E-X
3.1-0240-0592/26
The reproduction, transmission or use of this document or
its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
Class: RESTRICTED utility model or design, are reserved
Tag No. Name Type Diagram Vlv. Pos. Technical Data Note(s)
MBX98AA038KA01 Change-over Valve SV 3.1-9830
MBX98AA039KA01 Change-over Valve SV 3.1-9830
MBX98AA251 Shut-off Valve SOVC 3.1-9830
Gas Turbine
Power Generation
Technical Data
Siemens AG
MBX98AS038 Pneumatic Actuator ACT 3.1-9830
MBX98AS039 Pneumatic Actuator ACT 3.1-9830
MBX98BS007 Silencer SIL 3.1-9830
MBX98BS008 Silencer SIL 3.1-9830
MBX98BS038 Silencer SIL 3.1-9830
MBX98BS039 Silencer SIL 3.1-9830
MB
Equipment List
Limits and Settings
0106E-X
3.1-0240-0592/27
Gas Turbine Specifications
Technical Data Requirements for GT Working Media
Air, Fuel, Water
adversely affect the (operational) safety of ...") for contaminants are adhered to and monitored as
the GT and result in personal injury and specified. Furthermore, specified physical parameters of
equipment damage. the working media must also be adhered to during gas
turbine operation. Physical properties which characterize
the fuel include, for example, not only composition, but also
heating value, density, viscosity, flash point, dew point (in
the case of gaseous fuels) and pour point (in the case of
fuel oils). Limits (gradients, extremes-see 3.1-0210)
dictated by the systems engineering design also apply to
each of these properties.
Class: RESTRICTED
Siemens AG 3.1-0260-9100/1
Power Generation MB 1005E-X
Gas Turbine Specifications
Technical Data Requirements for GT Working Media
Air, Fuel, Water
GT Pollutants
Pollutants can ingress into the fuel and intake air in the following ways:
Fuel Air
Na Originating in rock formation from which crude oil was obtained Aerosols at coastal locations
Seawater used as ballast in tankers which have no cargo Washing of filters to remove dust
transfer to GT fuels if tanks and piping are not flushed prior containing salts
to pumping GT fuel
K Minor constituent of seawater (K/Na 1:28) Dust of mineral origin, (clay, feldspar)
Dominant in plant matter (coal-based fuels)
Pb Tetraethyl and tetramethyl lead as a fuel additive Automotive exhaust gases
In GT fuels stored in refinery tanks/piping which were not
flushed prior to pumping of fuel, not water soluble!
V Originating in rock formation from which crude oil was obtained,
present as water-insoluble vanadium porphyrin complex
Enrichment in residual oil
In GT fuels stored in refinery tanks/piping which were not
flushed prior to pumping of fuel
The reproduction, transmission or use of this document
Siemens AG 3.1-0260-9100/2
Power Generation MB 1005E-X
Gas Turbine Specifications
Technical Data Requirements for GT Working Media
Air, Fuel, Water
Sulfur (S) Nearly complete conversion to SOx Observe applicable SOX emissions
Compounds such as Na2SO4, K2SO4, limits
Na3Fe(SO4)3 are also corrosive, as their
melting points lie within the GT temperature
a utility model or design, are reserved
Siemens AG 3.1-0260-9100/3
Power Generation MB 1005E-X
Gas Turbine Specifications
Technical Data Requirements for GT Working Media
Air, Fuel, Water
GT.
Class: RESTRICTED
Siemens AG 3.1-0260-9100/4
Power Generation MB 1005E-X
Gas Turbine Specifications
Technical Data Requirements for GT Working Media
Air, Fuel, Water
ASTM D 3605
5)
Ash (in the case ASTM D 482 ppm(wt) 100
of fuel oil)
Nitrogen (N) ASTM D 4629 ppm(wt) Limits prescribed by locally applicable
(FBN = fuel bound nitrogen) emissions guidelines in the respective
countries (conversion of N to NOX)
Sulfur (S) ASTM D 129 cf. max. permissible Limits prescribed by
dust content locally applicable
ASTM D 1072 ppm(wt) emissions guide-
lines (100% con-
ASTM D 6228
version of S to SO)
Hydrogen sulfide (H2S) ASTM D 6228 ppm(vol) 6) 100
Mercaptans ASTM D 3227 ppm(wt) 10
6)
Acetylene (C2H2) ASTM D 1946 Vol. % 0.1
6)
Hydrogen (H2) ASTM D 1945 Vol. % 1
ASTM D 1946
Ethane (C2H6) ASTM D 1945 Vol. % 15
Higher molecular-weight 7)
hydrocarbons ASTM D 1946 Vol. % 10
CnHm (n 2) except C2H6
Limits for fuel impurities (dust and ash, V, Pb, Na, K, Ca) are based on a lower heating value (LHV) of 42,000kJ/kg. The
formula X * LHV/42 [X = pollutant content; LHV in MJ/kg] shall be used to correct for deviations in lower heating value.
Siemens AG 3.1-0260-9100/5
Power Generation MB 1005E-X
Gas Turbine Specifications
Technical Data Requirements for GT Working Media
Air, Fuel, Water
1)
Particulate impurities in If the stipulated values are exceeded, the permissible limits for fuel impurities shall be
compressor intake air and lowered by that amount contained in the intake air to ensure that the total mass flow of any
in fuel: given contaminant (intake air + fuel) does not exceed the prescribed limit. The total mass
flow rate of a given impurity may therefore be the sum of up to three individual mass flows
(air, fuel, H2O).
2)
Vanadium: No violations of this limit whatsoever are permissible.
3)
Lead: No further violations of the prescribed limit are permissible.
4)
Sodium and potassium: The standard limit of 0.3 ppm(wt) shall apply to the sum of sodium and potassium.
At coastal and industrial sites, this limit shall be reduced to 0.1 ppm(wt), provided that no
air analysis has been performed.
5)
Ash: A relevant ash fraction only occurs with liquid fuels.
6)
Hydrogen sulfide, These limits absolutely must be observed with gaseous fuels. (These impurities only occur
acetylene, hydrogen: in significant quantities with gaseous fuels.)
7)
Higher molecular weight The tendency of hydrocarbons to decompose increases with increasing chain length. If the
hydrocarbons: permissible fraction exceeds 10vol.%, problems may occur in premix mode (-> flashback).
Lube oils constitute a special problem. Lube oil films on the inner surface of pipes may
extend over great distances and thus cause flashback at the burner. If gas compressors
The reproduction, transmission or use of this document
Caution!
Danger of equipment damage: if gas compressors are used, they must be
a utility model or design, are reserved
Comprehensive evaluation of all available fuels is only possible if a separate analysis is performed for each fuel in
accordance with the subsection "Checklist for Fuels".
Suitable analytic methods that correspond to state-of-the-are engineering practice are permissible.
Caution!
Compressor Intake Air Danger of equipment damage: due to the
sensitivity of the cooling air system to
Contaminants clogging by dust particles, the gas turbine
The compressor intake air filters shall be designed such must never be operated with a defective
that the following dust concentration limits are not intake air filter or none at all. Cleaning
exceeded in the compressor intake air: intervals for the intake filters must
absolutely be complied with
Dust concentration [in mg dust/kg air] with an absolute
filter mesh of 10 m:
total: 0.08 Corrosive air contaminants such as salts which can
enter the turbine through the intake of seawater droplets or
2 < d < 10 m: 0.02
salt-containing dust particles must be separated out to the
greatest extent possible (cf. "Limits for chemical
contaminants in fuels and intake air"). This must be
ensured with suitable filter equipment (droplet separator if
necessary) and timely cleaning of filters. The following
Class: RESTRICTED
Siemens AG 3.1-0260-9100/6
Power Generation MB 1005E-X
Gas Turbine Specifications
Technical Data Requirements for GT Working Media
Air, Fuel, Water
elements is dissolved when humidity reaches high levels. Gas Turbine Operation
This causes a very high concentration of salts in the intake During operation of the gas turbine as well, auxiliary
air entering the gas turbine and the resultant corrosion systems and connecting piping must remain at
damage. temperatures not less than +5C to ensure their
functionality. Otherwise there would be a danger that
Low Intake Temperatures water-bearing packages and/or piping (including
residual purge water in the fuel oil return line or
Low ambient temperatures can necessitate restrictions condensation in valves) could freeze.
pertaining to gas turbine operating modes; in extreme
At intake temperatures near the freezing point
cases they may even render operation impossible. The
concurrent with high humidity, ice can form on and clog
different operating restrictions and the associated
the air filters in the intake structure. Ice can also form at
temperature limits are listed in the following.
the compressor inlet due to the accelerated flow of air.
A distinction must be drawn between startup of a gas
By operating the anti-icing system (recirculation of
turbine which has completely cooled down and operation of
about 2% of compressor discharge to a point upstream
a gas turbine at low ambient temperatures. In the latter
of the air filters), the intake air can be warmed by about
case, not the entire gas turbine, but rather only a small
8K, thus permitting a corresponding reduction of the
region near the compressor inlet, is affected by low
prescribed temperature limits by the same amount.
temperatures.
Extended operation in wet compression mode (injection
Startup of a Cold Gas Turbine after an Outage of water into the intake structure) is only permitted (if
The reproduction, transmission or use of this document
Siemens AG 3.1-0260-9100/7
Power Generation MB 1005E-X
Gas Turbine Specifications
Technical Data Requirements for GT Working Media
Air, Fuel, Water
Heating value
Design range min. 35,000 kJ/kg (without fuel gas preheating)
min. 40,000 kJ/kg (with fuel gas preheating)
max. 50,056 kJ/kg (100% methane)
Tolerance 5.0 % of design value
Change rate d LHV/dt = 0.1 %/s
Wobbe index 5)
Design Value 37.6 MJ/(kg x m3)0.5
Tolerance 16 % of design value (in this range, a gas with a
fluctuation range of 5% may be selected)
5)
Contaminants Also see subsection "Limits for Chemical
Chemical Contaminants in Fuels and Compressor Intake Air"
Remarks see Tab. 6
Siemens AG 3.1-0260-9100/8
Power Generation MB 1005E-X
Gas Turbine Specifications
Technical Data Requirements for GT Working Media
Air, Fuel, Water
Serial Note
No.
1)
The required fuel gas pressure at the terminal point of supply of the fuel gas system (MBP) is dependent on the
fuel gas composition, temperature and density as well as the ambient conditions (air temperature and geodetic
elevation of site).
Project-specific parameters are used for determination of the required fuel gas pressure (see the above) by
Siemens Power Generation and entered in the List of Settings for Open- and Closed-loop Control Equipment
(SREL, see 3.1-0210). This parameter is required for the functional design of various items in the fuel gas
system.
The calculated fuel gas pressure is the "design value" and applies to all gas turbine operating conditions. In
other words, it was selected such that normal operation of the gas turbine is possible even under the least
favorable conditions. The specified tolerances apply to this pressure.
In general, the maximum fuel gas pressure is calculated on the basis of the following parameters for the
maximum fuel volumetric flow:
lowest ambient temperature (with allowance for the permissible limit load)
maximum water injection (e.g. for NOx control)
minimum lower heating value (LHV)
maximum fuel gas temperature.
The reproduction, transmission or use of this document
Allowance is not made for the pressure drop of items not included in the gas turbine manufacturer's scope of
supply (e.g. gas pressure control station and fine gas filter). An appropriate correction factor must therefore be
generated and applied to specify the requisite fuel gas pressure, e.g. at the power plant's terminal point of
supply.
a utility model or design, are reserved
If the requisite gas pressure cannot be ensured by the gas supplier, a gas pressure boosting station must be
provided.
Caution!
Danger of equipment damage: in such cases where gas compressors are used, it is absolutely
imperative that those components of the gas compressor in contact with the fuel gas (e.g. pistons of a
reciprocating compressor) are entirely lube-oil-free. This requires the use of suitable materials (e.g.
PTFE piston rings)! Otherwise lube oil can ingress into the fuel lines and cause flashback.
2)
In principle, it is permissible to operate gas turbines on natural gas fuels at temperatures of up to 130C. These
maximum operating temperatures also apply to the pilot gas.
Without exception, fuel preheating to more than 50C shall be clarified with Siemens Power Generation on a
project-specific basis, as the permissible heating value in such cases is restricted to a range from 40,000 to
50,012kJ/kg. A special design fuel gas system is required if the range of permissible limits is extended.
The specified rate of gas temperature change shall not be exceeded, either during operation or in the event of
a fault (outage of the fuel preheating system).
3)
On the basis of the gas analysis for your plant, a "design value" must be selected between the minimum
heating value of 35,000 kJ/kg and the maximum heating value of 50,056 kJ/kg.
If a gas is to be used which has a heating value deviating from the design value by more than 5 %, this fuel is
subject to the approval of Siemens Power Generation.
Class: RESTRICTED
4)
The 10 K margin to the dew point shall apply to all constituents of the gases including the heavy hydrocarbons
contained in the gas. This ensures that the fuel gas does not contain any liquid constituents.
Siemens AG 3.1-0260-9100/9
Power Generation MB 1005E-X
Gas Turbine Specifications
Technical Data Requirements for GT Working Media
Air, Fuel, Water
Serial Note
No.
5)
The Wobbe index is calculated from the product of calorific value [MJ/kg] and the square root of the density of
natural gas at standard temperature and pressure [0C, 1.013bar]. For the standard fuel gas system, the
Wobbe index is calculated as 37.6MJ/(kg x m3)0.5. Assuming that standard burners will be used, natural gas
with a Wobbe index tolerance range of 16% can be used (burner design range). In this range, a gas with a
maximum fluctuation range of 5% may be selected. In the event of larger Wobbe index fluctuations, Siemens
Power Generation must be consulted in terms of further details and any requisite modification of parts.
6)
To ensure the required degree of purity after filtration, an appropriate filtration unit is provided upstream of the
terminal point of supply of the gas turbine fuel gas system (MBP). Care must be taken to ensure that
entrainment of particles caused by corrosion of the inner walls of the lines downstream of the filtration unit
and/or residual soiling in the piping is not possible.
Gases with a hydrogen (H2) content greater than 1vol.% and/or an acetylene (C2H2) content greater than
0.1vol.% shall only be combusted in diffusion mode. If such fuels were combusted in premix mode, this would
involve the risk of reactions occurring in the premix piping which could completely destroy the burners.
Siemens Power Generation shall also be consulted in the case of fuels with higher hydrocarbon (CnHm, n = 2)
contents greater than 10vol.% and/or a hydrogen content greater than 10vol.%. Ethane (C2H6) contents of up
to a maximum of 15vol.% are permissible.
The reproduction, transmission or use of this document
Caution!
Danger of equipment damage: gases with a hydrogen (H2) content greater than 1 vol.% and/or
acetylene (C2H2) content greater than 0.1 vol.% shall only be combusted in diffusion mode. If such fuels
were combusted in premix mode, this would run the risk that reactions would occur in the premix
piping which could completely destroy the burners.
a utility model or design, are reserved
Siemens AG 3.1-0260-9100/10
Power Generation MB 1005E-X
Gas Turbine Specifications
Technical Data Requirements for GT Working Media
Air, Fuel, Water
O2 Vol. % 0.1
2)
Other Vol. %
Properties 2)
a utility model or design, are reserved
Lower heating value MJ/kg 40 - 50 MJ/kg (with max. FG preheating); 35-50MJ/kg (without FG
(LHV) preheating)
Density at 15 C kg/m3 0.6741 - 0.7995 (with max. FG preheating) 0.8650 (without FG
preheating)
3)
Max. permissible natural C
gas temp. (preheating)
Natural gas dew point* C T Tdew point +10 (at design pressure, measured at the terminal point of
supply of the gas turbine fuel gas system (MBP))
Dew point of water* C T Tdew point +15
* Whichever temperature is higher shall be used in the design.
Contaminants 1)
Dust ppm(wt) 20
d < 2 m 18.5
2 < d < 10 m 1.5
d > 10 m 0.002
Na + K ppm(wt) 0.3
Ca ppm(wt) 10.0
V ppm(wt) 0.5
Pb ppm(wt) 1.0
H2S ppm(v) 10
1)
Permissible limits must be corrected using the equation: Xcorr = LHV(MJ/kg)/42(MJ/kg) x Xspec.
2)
To be specified by Sales & Marketing.
3)
The maximum permissible NG preheating temperature must be clarified together with Siemens Power Generation.
Siemens AG 3.1-0260-9100/11
Power Generation MB 1005E-X
Gas Turbine Specifications
Technical Data Requirements for GT Working Media
Air, Fuel, Water
American Units
Units and Conversions Gas data are often given in American units rather
Gas turbine data are usually given on a mass basis than in metric units. These data must then be converted.
(.../kg). However, the gas industry customarily provides Requisite conversion factors are listed below:
3
data on a volume basis (.../m ). It is therefore necessary Conversion of BTU (British Thermal Units) to kJ:
to convert the data of the fuel gas analysis. The following BTU x 1.05505 = kJ
data are used for this conversion.
3
Conversion of lbs (pounds) to kg: lbs x 0.45359 = kg
The designation m is used to denote standard cubic 3
3 3 Conversion of CF (cubic feet) to m : CF x 0.02832 =
meter (m n, m stp), i.e. a cubic meter at standard 3
m
temperature (Tn) and pressure (pn),
Conversion of psi to bar: psi x 0.06895 = bar
where
Standard pressure: pn = 1.01325 bar (rounded off to Standard conditions are also used for American
1.013 bar) units, however, these conditions are, however,
Standard temperature: based on different reference values:
Tn = 273.15 K = 0 C (rounded off to 273 K) Standard pressure: pn = 1.01325 bar (rounded off to
Heating value (kJ/kg) (conversion): 1.013 bar)
3 3
heating value (kJ/m n)/density (kg/m n). Standard temperature:
Gas density (conversion of rel. density): Tn = 288.15 K = 15 C (rounded off to 288 K)
3 3
rel. density x 1.293 kg/m = gas density (kg/m ) The difference is approx. 5.5% (288/273 = 1.055).
The reproduction, transmission or use of this document
In the gas industry, "relative density" is frequently This difference must also be allowed for.
stated instead of density. Relative density is the ratio
of the gas density to that of air. Relative density is
The use of American standard conditions is usually
therefore dimensionless.
a utility model or design, are reserved
Siemens AG 3.1-0260-9100/12
Power Generation MB 1005E-X
Gas Turbine Specifications
Technical Data Requirements for GT Working Media
Air, Fuel, Water
Liquid Fuel Requirements These limits are based on test procedures which are
specified in the aforementioned standards. The specified
(fuel oils conforming to ISO 4261; DIN 51603; ASTM D test procedures are used for verification of new analysis
396, 975, 2880) methods and are thus not binding in the sense that
The liquid fuels covered here include fuel oils analysis methods are not limited to these standards; the
conforming to ISO 4261, DIN 51603 Part 1, ASTM D 396, use of other analytic methods is permissible, provided the
ASTM D 975 (No. 2 Distillate Fuel Oil) and ASTM D 2880 stipulated detection threshold is achieved.
(Gas Turbine Fuel Oils); compliance with the limits in the
Major inspection intervals stipulated for Siemens gas
table below ensures suitability for use in the liquid fuel
turbines are based on the presumption that fuels of the
system.
specified quality are used.
Compliance with the limits given below is a
prerequisite to reliable and fault-free turbine operation.
Actual values shall be specified in the event that an order
is placed.
FP -5
Pressure upstream of injection pump bar p 3.0 Remark 4
Solids contained in filtered fuel (up- Compliance with the permissible limits
stream of the terminal point of supply of ensures that the gas turbine can be
the gas turbine FO system (MBN)) operated without the threat of erosion
ppm(wt) 20 damage.
- Permissible total solids content
m 10 The use of filters with a mesh size smaller
- Nominal filter mesh than specified may result in filter clogging
- Absolute filter mesh m 25 after a relatively short operating time.
Siemens AG 3.1-0260-9100/13
Power Generation MB 1005E-X
Gas Turbine Specifications
Technical Data Requirements for GT Working Media
Air, Fuel, Water
Serial Remarks
No.
1)
Flash Point:
Flash point shall be determined and compared with the limits of the national codes and standards applicable at the
location where the gas turbine is installed. Applicable explosion protection regulations and guidelines shall be
complied with.
If fuels must be heated to or above their flash point, additional explosion protection measures are absolutely
imperative. This shall also apply if it is not possible to determine the flash point.
2)
Kinematic viscosity:
The standard fuel oil package design includes a centrifugal pump. Lower viscosity limits are not known for
conventional liquid hydrocarbons used with this gas turbine design.
If the maximum permissible viscosity is exceeded, atomization of the fuel oil is impaired.
Effects: - Less complete combustion
- Increased pollutant emissions
The maximum permissible viscosity in premix mode is 12cSt and 28cSt in diffusion mode. Viscosity shall be
specified in accordance with the "Checklist" (20 and 40C).
The reproduction, transmission or use of this document
3)
Operating temperature (cf. also "Flash point" for explosion protection):
The minimum operating temperature for light distillate fuels is determined by the maximum viscosity and the
a utility model or design, are reserved
paraffin cloud point (SP; pour point). It may be necessary to preheat the fuel oil to meet these viscosity
requirements imposed to ensure proper flow and atomization, but fuel oil shall never be heated to above its flash
point (FL) to obviate the need for explosion protection measures.
If the temperature drops below the minimum operating temperature, paraffin may precipitate out and/or the
viscosity may exceed the maximum limit.
Effects:
Filter clogging
Shutdown of fuel oil injection pumps due to insufficient pressure in intake line
2)
see
If the pour point is reached, the fuel oil can no longer be pumped.
Effects:
Damage to and outage of fuel oil pumps
As a matter of principle, the maximum operating temperature should be 5 K below the flash point.
Otherwise, additional explosion protection measures must be taken.
4)
Fuel oil pressure:
Fuel oil pressure upstream of the injection pump must be at least 3.0 bar. Lower pressures require the approval of
Siemens Power Generation.
5)
Solids:
If the filter mesh is finer than stipulated and/or the permissible total solids content of the specified particle sizes is
exceeded, there is a danger of increased erosion in the fuel oil burner nozzles and on the turbine airfoils.
Effects:
Poor atomization
Uneven temperature distribution
Class: RESTRICTED
Siemens AG 3.1-0260-9100/14
Power Generation MB 1005E-X
Gas Turbine Specifications
Technical Data Requirements for GT Working Media
Air, Fuel, Water
1)
Properties
Lower heating value MJ/kg 42
(LHV)
Density at 15C kg/m3 820-870
at .....
Kinematic 20C cSt 3-6
The reproduction, transmission or use of this document
Boiling curve
65 % C 250
100 % C 350
37,7 C bar 0.0025
Vapor pressure 65,5 C bar 0.008
80.0 C bar 0.014
Contaminants 1)
Water content Mass % 0.01 (0.1)
Coke residues Mass % 0.15
Sediment ppm(wt) 20
d < 10 m ppm(wt) 18
10 d 25 ppm(wt) 2
d > 25 ppm(wt) 0
Ash ppm(wt) 100
Na + K ppm(wt) 0.3
V ppm(wt) 0.5
Pb ppm(wt) 1.0
Ca ppm(wt) 10
Mercaptans ppm(wt) 10
(organic compounds containing SH
groups)
Class: RESTRICTED
Siemens AG 3.1-0260-9100/15
Power Generation MB 1005E-X
Gas Turbine Specifications
Technical Data Requirements for GT Working Media
Air, Fuel, Water
Water quality
Operating mode Demineralized water
NOX reduction X
Water quality
Contaminants Test/Check Demineralized water
1)
Conductivity S/cm < 0.5
pH ASTM D 1293 58
1)
An increase in conductivity of up to 0.8S/cm is tolerable in the case of compressor washing, provided it is caused by air
ingress (CO2) and not by other factors (entrainment of salt, etc.).
Caution!
Danger of equipment damage: if steam is
injected, the steam temperature must
always be 50 K above the saturated steam
curve but must never exceed 400C because
of the materials used!
Siemens AG 3.1-0260-9100/16
Power Generation MB 1102E-X
Gas Turbine Specifications
Technical Data Requirements for GT Working Media
Air, Fuel, Water
Siemens AG 3.1-0260-9100/17
Power Generation MB 1005E-X
Gas Turbine Specifications
Technical Data Requirements for GT Working Media
Air, Fuel, Water
C6 Mass %
C7 (+) Mass %
H2 Mass %
a utility model or design, are reserved
CO Mass %
CO2 Mass %
H2O Mass %
N2 Mass %
O2 Mass %
Ar Mass %
Other Mass %
Properties
Lower heating value MJ/kg
(LHV)
Density at 15 C kg/m3
Temperature C
Dew point of water C
Contaminants
Dust Mass %
Alkali metals (Na + K) ppm(wt)
Other metals (V, ...) ppm(wt)
NH3 ppm(wt)
H2S ppm(wt)
Other specific characteristics:
Class: RESTRICTED
Siemens AG 3.1-0260-9100/18
Power Generation MB 1005E-X
Gas Turbine Specifications
Technical Data Requirements for GT Working Media
Air, Fuel, Water
Properties
Lower heating value MJ/kg
(LHV)
3
Density at 15 C kg/m
at .....
Kinematic 20 C cSt
viscosity 40 C
Flash point C
The reproduction, transmission or use of this document
Cloud point C
Boiling curve
10 %
20 %
a utility model or design, are reserved
30 %
40 %
50 % C
60 %
70 %
80 %
90 %
...................bar at ....... ...........C
Vapor pressure ...................bar at ....... ...........C
...................bar at ....... ...........C
Contaminants
Sediment Mass %
Water content Mass %
Wax or paraffins Mass %
Coke residues Mass %
Ash ppm(wt)
Na + K ppm(wt)
V ppm(wt)
Pb ppm(wt)
Ca ppm(wt)
Mercaptans ppm(wt)
(organic compounds containing
SH groups)
Other specific characteristics:
Class: RESTRICTED
Siemens AG 3.1-0260-9100/19
Power Generation MB 1005E-X
Gas Turbine Dimensions and Weights
Technical Data Gas Turbine Dimensions and Weights
No. Item
(approx.) L x W x H (L x dia.)
1 Compressor bearing casing upper section 9100 1300 x 4050 x 2050
Compressor bearing casing lower section 9100 1300 x 4050 x 2050
2 Compressor stationary blade assembly 1, upper section, with 21,500 3050 x 3250 x 1550
a utility model or design, are reserved
Turbine/compressor 308,000
plus possible weight tolerance of 5%
1)
Each of the indicated weights apply to the complete design group.
Class: RESTRICTED
Siemens AG 3.1-0280-9140
Power Generation MB 0705E-X
Gas Turbine Gas Turbine
Description of Components General Design Features
common to both compressor and turbine, comprises three an intake shaft located in front of the compressor; rotor
casing sections between the compressor bearing housing removal does not require removal or dismantling of the
and the turbine bearing housing. intake shaft.
Compressor stationary blade carrier I, the casting which
a utility model or design, are reserved
Fig. 1 Generic Illustration of an Annular Combustor Gas Turbine (does not reflect mechanical design details)
Siemens AG 3.1-0300-9140/1
Power Generation 0405E-X
Gas Turbine Gas Turbine
Description of Components General Design Features
The turbine bearing housing comprises a rigid, one- can be rotated 180 by using the rotor as a roll-out device
piece inner cylinder which supports the turbine bearing. and then lifted off.
Five radial struts link the hub directly to the outer casing. The final compressor stationary blade carriers and the
The exhaust gas flow is guided by the lining of the turbine turbine stationary blade carriers are supported by the outer
bearing housing, which is supported in such a way that casing so as to optimally allow for free thermal expansion
thermal expansion is accommodated. The exhaust casing of stationary and moving items. Centricity with the rotor is
connects the turbine stationary blade carrier to the exhaust set in the horizontal and vertical directions by means of
diffuser. The turbine bearing can be removed axially in the eccentric bolts. Axial displacement is accommodated by a
downstream direction. rotationally symmetric key and keyseat connection.
The annular gaps in the compressor section permit
Rotor blowing off a sufficient amount of air to permit stable
compressor operation at low speeds, particularly during
The rotor comprises a number of diskseach of which
startup and shutdown. Extraction of air at uniformly-spaced
carries one row of blades, two hollow shafts, and the
intervals around the circumference prevents excitation of
torque disks and is held together by one central tie bolt.
vibration in adjacent blade rows.
Hirth facial serrations mesh at the interfaces between
disks, hollow shafts, and torque disks. These serrations Three blowoff lines, each equipped with a butterfly
center the adjacent items relative to each other, permit valve, feed this flow of air to the exhaust diffuser.
unrestricted radial expansion, and transmit torque. This Cooling air lines run from the extraction chambers in
rotor configuration results in a self-supporting drum with the compressor to the turbine vanes in stages 2 to 4 and
The reproduction, transmission or use of this document
high stiffness, high critical speed, and a relatively low the turbine bearing housing.
weight. The compressor inlet guide vanes (IGVs) can be
The turbine rotor is internally cooled. A portion of the rotated about their longitudinal axis. Levers connect the
compressed air flow is extracted from the compressor main trunnions of these vanes to an adjusting ring which can be
a utility model or design, are reserved
flow and used to cool turbine moving blades. Air extracted circumferentially rotated. By varying the pitch of the IGVs,
from the compressor outlet is fed via bores in the torque the amount of air ingested by the compressor can be
disks to the first row of turbine blades. Downstream turbine adapted to the needs of startup and shutdown as well as
blades are supplied with air at a lower pressure and part-load operation. Subsequent rows of compressor vanes
temperature. are rigidly fixed in rings provided with dovetail slots; these
Another cooling air flow is fed inward into the rotor rings are inserted in the ring-shaped slots in the inner
through bores in compressor disks and flows through bores cylindrical surface of the stationary blade carriers. Inner
in the disk hubs of downstream compressor disks, through rings which form a seal between the vanes and the rotor
the pipes between the final compressor disk and then and also dampen vibration are fitted on both the row of
through hub bores in the turbine disks to the turbine rows IGVs with trunnions and the vanes with T-roots. Removal
2, 3, and 4. This flow of cooling air then exits into the hot of the stationary blade ring assemblies together with their
gas path and forms a film that envelops the hub and cools inner rings creates the axial clearance between two rotor
the blade roots. disks required for removing rotor blades.
This flow of cooling air flow ensures that the rotor drum, The outer shrouds of the turbine vanes are inserted into
a supporting element, is surrounded by cooling air in the corresponding slots in the inner cylindrical surface of the
turbine section as well, preventing additional thermal respective stationary blade carrier. The inner shrouds of
stresses which could cause shaft distortion during load stages 2 to 4 to are attached to segmented rings to form a
changes and rapid starts. seal against the rotor.
All compressor and turbine moving blades can be The stationary blade carriers and all turbine vanes are
removed and inserted without removing the rotor. cooled with air extracted from the compressor. This air
flows through the hollow spaces between the stationary
blade carrier and the outer shrouds and also through the
Stationary Blade Carriers and their hollow airfoils. It exits stage 1 to 3 airfoils into the gas flow
Supports and in stage 2 to 4 is also used to cool and seal the inner
glands.
The compressor and turbine vanes are inserted in
Class: RESTRICTED
Siemens AG 3.1-0300-9140/2
Power Generation 0405E-X
Gas Turbine Gas Turbine
Description of Components General Design Features
toroidal flame zone produce a relatively uniform well suited for shipment. Requisite lines used to connect
temperature field upstream of the turbine. these transport units are prefabricated so that once the
major items are aligned on the foundation, the only
connecting work required is bolting flanges and making the
a utility model or design, are reserved
Fig. 2 Longitudinal Section View of Gas Turbine with Annular Combustor (does not reflect mechanical design
details)
Class: RESTRICTED
Siemens AG 3.1-0300-9140/3
Power Generation 0405E-X
Gas Turbine Gas Turbine
Description of Components Intermediate Shaft
Siemens AG 3.1-0320-00536
Power Generation MBA 0704E-X
Gas Turbine Compressor and Turbine
Description of Components Longitudinal Section
including rights created by patent grant or registration of
The reproduction, transmission or use of this document
or its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
1 Intermediate shaft 7 Adjustment system 13 Compressor exhaust diffuser 19 Turbine stationary blades
2 Hydraulic turning gear 8 Compressor moving blades 14 Burner assembly 20 Turbine moving blades
3 Intake duct 9 Compressor stationary blades 15 Outer casing 2 21 Journal bearing
4 Compressor bearing housing 10 Stationary blade carrier I 16 Combustion Chamber 22 Exhaust casing
5 Combined journal and thrust bearing 11 Stationary blade carrier II 17 Outer casing 3
6 Variable-pitch inlet guide vanes 12 Rotor 18 Turbine stationary blade assembly
Class: RESTRICTED
Siemens AG 3.1-0400-9080
Power Generation MB 0705E-X
Gas Turbine Compressor and Turbine
Description of Components Rotor
Detail Y
Siemens AG 3.1-0410-9140
Power Generation 0704E-X
Gas Turbine Compressor and Turbine
Description of Components Compressor Rotor Blades
Each moving blade is manufactured from a single blank This design enables removal/insertion of blades in the
of rustproof material. event that the rotor must be disassembled.
The vane profile (1) of the blade is optimized in terms of The front rows of compressor airfoils are provided with
flow characteristics and strength by selecting the a surface coating to protect against corrosion. Differences
appropriate length to width ratio. in the color of compressor airfoil coatings as well as sliding
marks on compressor blade roots may occur as a result of
Dovetail blade roots (4) are used which are
fabrication methods, however do not restrict the quality of
dimensioned to vane length.
the affected items.
including rights created by patent grant or registration of
The reproduction, transmission or use of this document
Siemens AG 3.1-0420-9000
Power Generation MBA 0106E-X
Gas Turbine Compressor and Turbine
Description of Components Pitch Adjustment of Inlet Compressor Guide Vanes
Siemens AG 3.1-0450-9135
Power Generation MBA 0705E-X
Gas Turbine Compressor and Turbine
Description of Components Compressor Outlet Diffuser
Siemens AG 3.1-0460-9140
Power Generation 0704E-X
Gas Turbine Compressor and Turbine
Description of Components Exhaust Diffuser
Function During startup and shutdown of the gas turbine, air bled
from the compressor is fed through the blowoff lines
Turbine exhaust is fed through the exhaust diffuser, the connected to three pipe nozzles (5) that empty into the
downstream exhaust system and into the stack; in the exhaust diffuser.
process static pressure increases as a function of the
The readings of the 24 thermocouples (2) spaced
decrease in velocity.
around the circumference are used to calculate the
corrected turbine outlet temperature OTC.
Configuration A manhole (3) located in the upper portion of the
The exhaust diffuser comprises a conical pipe section exhaust diffuser is provided to permit access into the
(4). A flange (1) at its inlet end is bolted to the casing lining, exhaust diffuser during inspections.
its outlet end is welded to the downstream exhaust system.
A-A
Offenders will be liable for damages. All rights, including
rights created by patent grant or registration of a utility
The reproduction, transmission or use of this document or its
content is not permitted without express written authority.
Siemens AG 3.1-0520-9103
Power Generation MBA 0705E-X
Gas Turbine Compressor and Turbine
Description of Components Compressor Bearing Housing
1 Bearing housing
2 Struts
3 Oil seal ring
4 Combined journal and thrust
bearing
5 Bearing seal ring
6 Cover
Class: RESTRICTED
Siemens AG 3.1-0530-9140
Power Generation 0704E-X
Gas Turbine Compressor and Turbine
Description of Components Combined Journal and Thrust Bearing
facilitates shaft rotation. A thermocouple (7) installed in the monitored by displacement sensors.
lower journal bearing shell monitors the babbitt metal
A-A
or design, are reserved.
7 Thermocouple
7
8 Bore
Siemens AG 3.1-0540-9140
Power Generation 0704E-X
Gas Turbine Compressor and Turbine
Description of Components Turbine Journal Bearing
Siemens AG 3.1-0570-8000/1
Power Generation MBD 0604E-X
Gas Turbine Compressor and Turbine
Description of Components Turbine Journal Bearing
The reproduction, transmission or use of this document
or its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of
a utility model or design, are reserved
2 Journal bearing
8 Centering key
9 Adjustable wedges (vertical direction)
10 Trunnion
11 Bearing cage
Class: RESTRICTED
Siemens AG 3.1-0570-8000/2
Power Generation MBD 0604E-X
Gas Turbine Compressor and Turbine
Description of Components Compressor and Turbine Shaft Glands
Refer also to the following section(s): The function of the labyrinth seals in the front hollow
shaft section (5) is to prevent the intake of oil-laden air from
Shaft Glands 3.1-0580 the compressor bearing into the flow path. To this end, the
labyrinth seals are supplied with air at atmospheric pres-
Function sure. This flow of air enters via a duct (1) in the bearing
casing. The amount of leakage air through the labyrinths is
The turbine shaft glands minimize air leakages and are so small that there is only slight pressure loss in the chan-
used for dosing sealing air. They prevent leakage of oil- nel in the bearing casing. This pressure loss is lower than
laden air from the bearing areas, reduce reverse flows in the vacuum generated by the oil vapor extractor. Some of
the compressor and protect the turbine rotor in the turbine the leakage air thus flows through the oil seal ring (6) into
area from flows of hot gases between casing and blading the bearing space. The rest of the leakage air is fed to the
with associated heat-up. intake duct, which is at subatmospheric pressure. Labyrinth
seals (4) are located between the rows of stationary (3) and
moving blading (2) of the compressor to minimize the re-
Construction and Functional Principle
verse flow of compressed air.
The shaft glands of the turbine/compressor are de-
signed as non-contact labyrinth seals as described in
3.1-0580.
including rights created by patent grant or registration of
The reproduction, transmission or use of this document
Siemens AG 3.1-0590-9140/1
Power Generation MBA 0705E-X
Gas Turbine Compressor and Turbine
Description of Components Compressor and Turbine Shaft Glands
Rotor cooling air flows into the rotor via the shaft glands section of the rotor represented in Fig. 2 is completely
(11) on the center hollow shaft (7). A portion of this air shielded from the flow of hot gas in this way.
passes through the right labyrinth in the direction of the Compressed air from various compressor extraction
turbine and prevents hot gas from the turbine from pene- points cools the turbine stationary blade rows fitted with
trating the clearance between row 1 of the turbine station- hollow blades.
ary blading (9) and row 1 of the moving blading (10). The
including rights created by patent grant or registration of
The reproduction, transmission or use of this document
Siemens AG 3.1-0590-9140/2
Power Generation MBA 0705E-X
Gas Turbine Compressor and Turbine
Description of Components Compressor and Turbine Shaft Glands
Turbine stationary blade row 2 (13) is given here as an roots, this air also seals the clearance between the disc rim
example to show how part of the cooling air emerges from of moving blade row 1 (16) and the seal ring. Turbine sta-
the stationary blades on the hub side and passes to the tionary blade row 3 (14) is sealed analogously, at turbine
rotor surface through holes (18) in the seal rings. The air stationary blade row 4 (15) only the cooling air emerging at
serves as seal air for the labyrinth seal between the seal the blade roots serves as seal air. Admission of hot gas
ring (17) and the shoulders of the opposing moving blade into the relevant clearances with associated heat-up of the
rows. Together with the cooling air emerging at the blade turbine rotor is thus prevented.
including rights created by patent grant or registration of
The reproduction, transmission or use of this document
Siemens AG 3.1-0590-9140/3
Power Generation MBA 0705E-X
Gas Turbine Compressor and Turbine
Description of Components Compressor and Turbine Shaft Glands
To reduce axial thrust of the rotor, the real hollow (25) in the bearing casing into an annular space (24) and
shaft (29) is designed as a balancing piston. To this end, from there along the protective liner to the seal air outlet
the annular space (28) above the rear hollow shaft is (20). The flows of leakage air thus shields the rotor and
charged with compressed air from a suitable compressor bearing sections shown in Fig. 4 from heat input from the
extraction point. The adjoining labyrinth seals (27) thus exhaust gas flow. The annular space (24) is also open to
have the function of minimizing leakages from the annular the atmosphere via the turbine bearing strut jacketing.
space. The air flowing through the labyrinth (21) on the As already described for the compressor inlet, the
external radius of the rear hollow shaft simultaneously admission of a small amount of air into the turbine bear-
prevents hot exhaust gases from escaping through the ing casing through the shaft gland on the oil seal box (26)
clearance at the turbine outlet downstream of turbine prevents the escape of oil vapor.
moving blade row 4 (19). The leakage air flowing through
the labyrinth seals (27) passes via the collector chamber
including rights created by patent grant or registration of
The reproduction, transmission or use of this document
Siemens AG 3.1-0590-9140/4
Power Generation MBA 0705E-X
Gas Turbine Compressor and Turbine/GT Bearings
Description of Auxiliary Systems Gas Turbine Instrumentation
Refer also to: MBD11CY102 and near the compressor bearing with
MBD12CY101 and MBD12CY102. Each transmitter signal
List of Control Settings (SREL) 3.1-0210 is used by a processor module to calculate the effective
List of Measuring Instruments 3.1-0220
vibration velocity; the output signal current then undergoes
List of Electrical Loads 3.1-0230
Equipment List 3.1-0240 further processing in the I&C system. Because two
P+I Diagram, Gas Turbine 3.1-1010 equivalent channels are used to measure casing vibration,
these channels are designated Channel 1 and Channel 2
Settings, limits, and measuring ranges of the devices for additional logic links. If at least one of the two channels
referred to here are given in the List of Measuring indicates that the limit Y.LAGER.M is exceeded, the alarm
Instruments, Equipment List, and List of Control Settings BEARING VIBRATION WARNING is annunciated. If any
(SREL). This description only gives guideline values. channel indicates violation of the higher limit Y.LAGER.S,
the gas turbine trips and is shut down.
Preliminary Remarks
Shaft Vibration Measurement
Gas turbine instrumentation, valves, and equipment
units, with the exception of such items associated with Shaft vibration measurement data are used to depict
other auxiliary systems, are indicated in the P+ID referred vibration behavior on a display. Shaft vibration is measured
to above. The auxiliary system instruments are depicted in near the turbine bearing by vibration pickups
the respective P+I diagrams. Settings of the switching-type MBD11CY111 and MBD11CY112 and near the
compressor bearing by vibration pickups MBD12CY111
content is not permitted without express written authority.
six speed pickups MBA10CS101 to MBA10CS106. Slots reference the vibration vector to the rotational angle of the
are machined in the intermediate shaft near the turbine shaft. The Keyphasor is a pickup, analogous to the
compressor bearing. The magnetic field sensors located speed transmitters, which generates one pulse per
around the circumference of this region generate a pulse revolution of the shaft, namely at that instant when a slot
each time the land between two adjacent slots passes by. machined in the turbine shaft passes by.
As the shaft rotates, each magnetic field sensor generates
an output signal with a frequency equal to the product of
the number of slots and the shaft speed.
Bearing Temperature Measurement
The output signals undergo further processing in two The compressor end of the GT shaft is equipped with a
redundant speed monitoring systems, each comprising journal bearing and thrust bearings for both directions. A
three channels. Both speed monitoring systems forward journal bearing supports the turbine end of the rotor.
their output signals to the overspeed protection system. An insufficient supply of lube oil, overloading, excessive
Every channel of each speed monitoring system is set to oil temperatures, or foreign matter can damage these
the limit S.TURB.72. If at least two channels of one or both bearings. Bearing metal temperature is measured to permit
speed monitoring systems indicate that this limit has been prompt detection of impending damage. Impending
violated, speed is impermissibly high, the gas turbine trips damage to bearings is generally indicated by elevated
and is shut down. bearing temperature.
The GT controller and speed indicator only receive Radially-opposed segments of the thrust bearing are
signals from that speed monitoring system which receives equipped with dual-element thermocouples, four on the
its signals from magnetic field sensors MBA10CS101, end facing the compressor and four on the end facing the
MBA10CS102, and MBA10CS103. generator. Three of the four thermocouples comprising the
dual-element thermocouples MBD12CT102A/B and
MBD12CT103A/B on the generator end of the bearing and
Class: RESTRICTED
Siemens AG 3.1-1000-0592/1
Power Generation MBA/MBD 0905E-X
Gas Turbine Compressor and Turbine/GT Bearings
Description of Auxiliary Systems Gas Turbine Instrumentation
temperature. In both cases, the fourth serves as a reserve. thermometer is used to calculate the average compressor
The A elements of dual-element thermocouples MBD12- inlet temperature. Those signals from the dual-element
CT112A/B, MBD12CT113A/B, MBD12CT114A/B, and resistance thermometers not normally used for calculation
MBD12CT115A/B is used for display purposes, the B purposes serve as backups.
elements are used as backups. The average compressor inlet temperature is used to
Triple-element thermocouples are installed at each of calculate the corrected turbine outlet temperature (OTC).
the journal bearings. Two triple-element thermocouples Calculation and use of the corrected turbine outlet
(MBD12CT101A/B/C and MBD12CT106A/B/C) are located temperature is described in the following subsection
at the compressor bearing. A tilting-pad journal bearing is Turbine Outlet Temperature.
provided at the turbine end, one triple-element
thermocouple (MBD11CT101A/B/C and
MBD11CT102A/B/C) is provided per bearing pedestal.
Compressor Outlet Temperature and
Pressure
The alarm BEARING TEMPERATURE HIGH is
annunciated if two-of-three logic indicates that the limit Pressure transducers MBA12CP101 and MBA12CP102
T.LAGER.M is exceeded at the compressor bearing. In the and dual-element thermocouples MBA12CT101A/B and
case of the turbine bearing, this pretrip alarm is not MBA12CT102A/B measure the compressor outlet pressure
annunciated until the limit T.LAGER.M01 has been and temperature. These readings are displayed on the
exceeded, because these bearings are exposed to the hot turbine-generator control console (local control console)
flow of exhaust. and recorded.
content is not permitted without express written authority.
If the temperature of the compressor or turbine bearing The compressor outlet pressure is used in numerous
exceeds a still higher limit T.LAGER.S, the GT trips and is ways (e.g., calculation of the relative combustion chamber
shut down. pressure, by the combustion chamber pressure ratio limit
controller, calculation of fuel oil mass flow, and for
controlling the jet pumps). These calculations and their
Pressure and Differential Pressure functions are described in the Sections pertaining to the
upstream of the Compressor respective systems.
Pressure upstream of the compressor is displayed by
or design, are reserved.
temperature of the air flow at the compressor inlet. One In its capacity as a limit controller, the temperature
temperature signal from each dual-element resistance controller ensures that defined maximum temperatures for
Siemens AG 3.1-1000-0592/2
Power Generation MBA/MBD 0905E-X
Gas Turbine Compressor and Turbine/GT Bearings
Description of Auxiliary Systems Gas Turbine Instrumentation
the combustion chamber, turbine, and exhaust system are Compressor IGV Pitch Adjustment
not exceeded. The temperature protection system
intervenes if the temperature controller fails. The gas turbine compressor is equipped with one row
of variable-pitch inlet guide vanes. The flow of air through
Temperature protection comprises a logic function
the compressor and thus the gas turbine is controlled by
based on the signals of the B and C elements of the 24
adjusting the pitch of the compressor inlet guide vanes
temperature measuring points. If the limit TT.ATK.S07 is
within a defined, permissible range. As the inlet guide
exceeded, the gas turbine trips and is shut down. A pretrip
vanes are opened, the air flow through the gas turbine
alarm TEMPERATURE PROTECTION WARNING is
increases, when they are closed it decreases. Given a
annunciated prior to trip if the temperature exceeds limit
constant fuel flow, turbine outlet (exhaust) temperature
TT.ATK.M07.
decreases when the vanes are opened and vice versa. If
If a given burner supplies too much fuel to the the flow of fuel and air are simultaneously increased or
combustion chamber, this causes a localized hot spot decreased, a constant turbine outlet temperature can be
downstream of the turbine. The pretrip alarm maintained. Because the fuel-air ratio is also held nearly
TEMPERATURE PROTECTION WARNING is constant in this case, the premix burners, which are
annunciated and if a still higher temperature limit is inherently only operable with a narrow fuel-air ratio range,
exceeded, GT trip is triggered. can be used over a wider range of conditions.
Cold spots occur if one or more flames go out. Because The pitch of the inlet guide vanes is adjusted in
the fuel not immediately combusted when it emerges from response to OTC using a downcircuit position controller
the extinguished burners is combusted at the rear of the that operates actuator MBA11AS001, thus setting the pitch
content is not permitted without express written authority.
combustion zone, this fault only becomes relevant in terms of the inlet guide vanes accordingly. Position transmitter
of triggering protection system response in the event that MBA11CG101 measures the pitch of the IGVs.
several adjacent burners go out. If one burner Compressor IGV pitch is displayed at the turbine-generator
extinguishes, the turbine temperature protection system control console.
annunciates the pretrip alarm TEMPERATURE
PROTECTION WARNING. If two adjacent burners
extinguish, the shutdown program is used to shut down the Hydraulic Clearance Optimization (HCO)
GT and the pretrip alarm OUTLET TEMPERATURE
or design, are reserved.
Siemens AG 3.1-1000-0592/3
Power Generation MBA/MBD 0905E-X
Gas Turbine Compressor and Turbine / Gas Turbine Bearing
Description of Auxiliary Systems P+I Diagram Gas Turbine
Siemens AG 3.1-1010-0592
Power Generation MBA / MBD 0106E-X
Gas Turbine Compressor and Turbine / Gas Turbine Bearing
Description of Auxiliary Systems Temperature Measuring Points at Gas Turbine
A-A
03-9070-01361b
F-F
Fig. 1: Survey
C-C
The reproduction, transmission or use of this document
or its content is not permitted without express written
Fig. 2: Thermocouples; Compressor Inlet (Section A - A in Fig. 1) Fig. 3: Thermocouples; Inlet Plenum (Section F - F in Fig. 1)
a utility model or design, are reserved
W B-B
V
Class: RESTRICTED
Fig. 4: Thermocouples; Exhaust Duct (Section C C in Fig. 1) Fig. 5: Thermocouples; Compressor Outlet (Section B B in Fig. 1)
Siemens AG 3.1-1040-9077
Power Generation MBA 1005E-X
Gas Turbine Compressor and Turbine / Gas Turbine Bearing
Description of Auxiliary Systems Measuring Instruments Compressor Bearing
A-A Y
C-C
54KF04-MBD1D-A01-A01
Fig. 1: Survey
The reproduction, transmission or use of this document
X
a utility model or design, are reserved
Fig. 3: Section of Compressor Bearing Housing (Section A A in Fig. 1) Fig. 4: Thermocouples Compressor Bearing (Section C C in Fig. 3)
Y
EE
Class: RESTRICTED
Fig. 2: Sensors for Shaft Vibration and Speed (View X in Fig 1) Fig. 5: Vibration Sensors Compressor Bearing Housing (View Y in Fig. 3) Fig. 6: Thermocouples Compressor Bearing (Section E E in Fig. 3)
Siemens AG 3.1-1060-0592
Power Generation MBD 0106E-X
Gas Turbine Compressor and Turbine / Gas Turbine Bearing
Description of Auxiliary Systems Measuring Instruments Turbine Bearing
13-9150-16300-
Fig. 1: Survey
The reproduction, transmission or use of this document
Fig. 3: Sensors for Shaft Vibrations (Detail Z in Fig. 2) Fig. 4: Transducers for Shaft Vibrations and Thermocouples for
Bearing Temperature (View V in Fig. 2)
Y
Class: RESTRICTED
Fig. 2: Sensors for Bearing Temperature and Shaft Vibrations (Section A A in Fig. 1) Fig. 5: Sensors for Shaft Vibrations (Detail Y in Fig. 2)
Siemens AG 3.1-1080-9071
Power Generation MBD 0505E-X
Gas Turbine Compressor and Turbine / Gas Turbine Bearing
Description of Auxiliary Systems Drainage System
be closed once draining has been function as a collecting vessel. For this reason it must be
completed. If they are not closed, hot gases ensured that the cleaning fluid can freely flow from the
will escape from the drainage piping and header into a disposal tank at all times. A venting nozzle
equipment may be damaged or persons prevents the buildup of pressure in the collecting tank.
injured. In addition, crosscurrent flow may
When cleaning the compressor, some of the cleaning
occur between the individual gas turbine
fluid flows to the lowest point of the compressor intake
drain connections.
structure which is not depicted in the P+ID. This lowest
point is connected to the disposal tank via a duct which has
no shutoff valve. Instead the duct contains a hydraulic seal
which must be filled with water before the gas turbine is
started up. During operation of the gas turbine this
hydraulic seal prevents the subatmospheric pressure that
prevails upstream of the compressor from drawing air in
the disposal tank into the compressor.
The shutoff valves of the blowoff system drains and
also those of the turbine cooling system drains are
depicted in the drainage system P+ID.
Class: RESTRICTED
Siemens AG 3.1-1200-9070/1
Power Generation MBA/MBO 1203E-X
Gas Turbine Compressor and Turbine / Gas Turbine Bearing
Description of Auxiliary Systems Drainage System
Fuel Oil Drainage System chamber. A distinction is made between two types of failed
When the gas turbine is started on liquid fuel (fuel oil), start:
the latter is injected into the combustion chamber during Fuel oil is injected without formation of flames. If this
the ignition phase. In the event that the flames do not ignite type of failed start occurs, the absence of a signal from the
immediately on startup with fuel oilor if they initially light flame monitor keeps the 3-way valve in its fuel oil drainage
and then extinguishfuel oil may precipitate on the setting.
combustion chamber walls. This uncombusted fuel oil must Fuel oil is injected, flames initially form, however they
be drained off before the gas turbine is restarted. Draining subsequently extinguish. This type of failed start is always
is achieved via the same pipe connection at the followed by GT trip. When flames extinguish, the 3-way
compressor outlet that is used to drain the spent cleaning valve receives the signal Flame out from the flame
fluid after cleaning the turbine or compressor. monitor and is returned to the fuel oil drainage setting.
Three-way solenoid valve MBA22AA001 is used to Each time the gas turbine is shut down, including after
route fluid from this drain, either to shutoff valve failed starts, both solenoid valves are energized, i.e.
MBA22AA251 or to a drain pipe equipped with solenoid actuated to their oil drainage settings, when speed drops
valve MBA22AA002. The fuel oil must be fed from below S.TURB.21 (for example 25% rated speed). After a
connection 111A into a disposal tank for used oil (supplied failed start, oil flows via connection 111A into the used oil
locally). This tank must have provision for continuous disposal tank. At speeds below S.TURB.21 it is ensured
venting since air can also escape at connection 111A. that pressure does not become excessive when draining oil
These solenoid valves remain in their drainage settings from the combustion chamber and thus that oil and air
content is not permitted without express written authority.
during standstills or turning gear operation to allow any cannot flow into the leakage oil tank at an impermissibly
uncombusted oil that collects to drain off. For this purpose, high velocity. To ensure that all uncombusted oil collecting
these two solenoid valves are always actuated to their oil after a failed start has sufficient time to drain out of the
drainage setting at speeds below S.TURB.05 (for example combustion chamber, it is not possible to restart the gas
5% rated speed). 3-way valve MBA22AA001 then has the turbine until monitoring period K.ENTOEL.01 (for example
setting A-C open; B closed and solenoid valve 5 minutes) has elapsed.
MBA22AA002 is open. Wastewater that accumulates during compressor
Solenoid valve MBA22AA002 is closed in one of the cleaning must be drained off. To do this, solenoid valves
or design, are reserved.
first steps of the fuel-independent startup program. During MBA22AA001 and MBA22AA002 must be manually
a start with fuel oil, the 3-way valve is actuated such that actuated to their drain settings. At speeds below
the fuel oil drain is open (A-C open; B closed) as it cannot S.TURB.05 (for example 5% rated speed) these solenoid
be ascertained in advance whether the start will be valves can be actuated manually.
successful or aborted. These solenoid valve settings These solenoid valves are equipped with limit switches.
ensure that any fuel oil which may collect does not enter If none of the solenoid valves are in the drain setting during
the water drainage system and no hot air can escape from operation at high speed (>S.TURB.21) the protection
the fuel oil drainage system. In the case of a fault-free start, system alarm Fuel oil drainage valve not closed is issued
the 3-way valve is actuated to its drain setting A-B open; C and overall trip is triggered.
closed when flames are detected in the combustion
Class: RESTRICTED
Siemens AG 3.1-1200-9070/2
Power Generation MBA/MBO 1203E-X
Gas Turbine Compressor and Turbine / Gas Turbine Bearing
Description of Auxiliary Systems P+I Diagram Drainage
Siemens AG 3.1-1210-0592
Power Generation MBA / MBD 0106E-X
Gas Turbine Compressor and Turbine / Gas Turbine Bearing
Description of Auxiliary Systems Blowoff System
Refer also to: Each blowoff line is equipped with a butterfly-type valve
which is opened when air is to be bled from the
List of Control Settings (SREL) 3.1-0210 compressor. These blowoff valves are actuated
List of Measuring Instruments 3.1-0220
pneumatically to the positions OPEN and CLOSED.
Equipment List 3.1-0240
P+I Diagram, Blowoff System 3.1-1410 System description Pneumatic Valves and Piping for
Blowoff Equipment covers these actuators.
Associated Systems:
Extraction Compr. Blowoff valve KKS
Compressor Cleaning 3.1-1180 Stage (butterfly type)
P+I Diagram, Compressor Cleaning 3.1-1190
Drainage System 3.1-1200 Ea1 5 1.1 MBA41AA051
P+I Diagram, Drainage System 3.1-1210 Ea1 5 1.2 MBA42AA051
Pneumatic Valves and Piping
for Blowoff System 3.1-9900 Ea2 9 2 MBA43AA051
P+I Diagram Pneumatic Valves and
Piping for Blowoff System 3.1-9910
Because the blowoff lines routed below the machine
centerline act as siphons, drain lines are attached at the
Settings, limits, and measuring ranges of the devices
lowest points of these lines. Water that may have
referred to here are given in the List of Measuring
accumulated here during compressor cleaning is drained
Instruments, Equipment List, and List of Control Settings
off via these lines (cf. 3.1-1200, Drainage System and
(SREL).
content is not permitted without express written authority.
excessive deceleration. As a result, the overloaded All blowoff valves are open at the onset of startup. They
compressor stages are no longer capable of generating the are closed sequentially as of about 80% rated speed. This
necessary increase in pressure, the phenomenon known minimizes the associated abrupt changes in temperature
as compressor surging occurs and the delivery rate and output.
becomes unstable. The breakdown of flow results in
periodic flow reversals, manifested outwardly by Startup with Fuel Oil
pronounced, periodic fluctuations in the compressor outlet All blowoff valves are open at the onset of startup.
pressure together with severe vibration of the turbine- Shortly before rated speed is reached they are closed in a
generator and pulsating noise synchronous with these staggered sequence with brief delays.
pressure fluctuations. This subjects the compressor airfoils
to both high alternating bending stresses and high Operation
temperatures.
After startup has been completed the blowoff valves
Compressor surging is prevented by bleeding air from
always remain closed during normal operation. They are
certain locations of the compressor when the speed range
only opened in the event of overall gas turbine trip or
that is critical in terms of surging is reached.
normal shutdown.
Siemens AG 3.1-1400-9070/1
Power Generation MBA/MBD 0704E-X
Gas Turbine Compressor and Turbine / Gas Turbine Bearing
Description of Auxiliary Systems Blowoff System
Siemens AG 3.1-1400-9070/2
Power Generation MBA/MBD 0704E-X
Gas Turbine Compressor and Turbine / Gas Turbine Bearing
Description of Auxiliary Systems P+I Diagram Blowoff System
Siemens AG 3.1-1410-0592
Power Generation MBA / MBD 0106E-X
Gas Turbine Compressor and Turbine/GT Bearings
Description of Auxiliary Systems Hydraulic Clearance Optimization (HCO)
hydraulic system supplies fluid to corresponding cylinders; accumulator function or failure of the HCO piston chamber
axial stops limit rotor displacement in the primary return line shutoff element.
displacement direction and in the secondary displacement To perform the principal task of permanently supplying
direction. oil to the primary and secondary piston chambers of the
The operating pressure of max. 180bar is generated by HCO thrust bearing, a bladder accumulator with
a separate hydraulic supply system. Axial displacement corresponding accumulator safety block MBA51AA193 is
must be performed slowly to prevent excessive mechanical provided on the HCO supply station. This accumulator is
loadings on the structural elements of the bearing. Defined charged by the above-mentioned pumps and can be
displacement times can only be achieved when the isolated from the system using shutoff valve MBA51AA255
hydraulic system is vented, for this reason the system must and relieved via drain valve MBA51AA257.
be completely filled with hydraulic fluid (lube oilthe thrust A manually-actuated shutoff valve (MBA51AA251 and
bearing for each displacement direction is provided with a MBA51AA252, respectively) is provided upstream of each
supply and a return line. To keep pump loadings at low pump to permit inspection and maintenance work. Each of
levels and prevent rapid fouling of the filter, the return line these valves is equipped with a position limit switch for
is shut off so that oil cannot continuously circulate in the monitoring the OPEN valve setting. These pumps shall
hydraulic clearance optimization (HCO) system. only be started up when the corresponding valve is open.
Provision is made for regular replacement (flushing) of To protect the flow control valves, oil is cleaned by filter
hydraulic fluid in the activated displacement direction MBA51AT001 located upstream of the pumps. The check
during GT operation, among other things to prevent valve MBA51AA201 protects the filter against back-flow.
excessive heating of the fluid. This also displaces any Filter fouling is monitored by differential pressure switch
trapped air bubbles or wear debris caused by abrasion of MBA51CP003. A pretrip alarm is annunciated if response
the HCO piston seals. Furthermore, the flushing operation of this switch persists for longer than 5 seconds. Oil
Class: RESTRICTED
constitutes a function test of the bladder accumulator and temperature is measured upstream of the filter by
instrumentation. resistance thermometer MBA51CT101 and indicated
locally by thermometer MBA51CT501.
Siemens AG 3.1-1500-0592/1
Power Generation MBA/MBD 1105E-X
Gas Turbine Compressor and Turbine/GT Bearings
Description of Auxiliary Systems Hydraulic Clearance Optimization (HCO)
2/2-way solenoid-type seat valves (MBA53AA001 to line upstream of the solenoid valves. In the interest of
MBA53AA006) are provided in the supply and return lines availability, these are redundant. Pressure gauge
of the primary and secondary displacement directions to MBA51CP501 is provided for checking system pressure
enable pressurizing and relieving of the primary and locally.
secondary displacement direction pistons. The following Pressure transducers MBA53CP101/102 are located in
flow control valves are installed to ensure that the the return line from the primary displacement piston
permissible axial shaft displacement times are achieved: chamber and MBA53CP103/104 in the return line from the
MBA53AA152 and MBA53AA153 downstream of the secondary displacement piston chamber. These pressure
solenoid valves in the supply line to the respective HCO sensors can be used to monitor pressure in the respective
piston chamber and MBA54AA154 and MBA54AA155 piston chambers. In the interest of availability, these
upstream of the solenoid valves in the return lines. Both the pressure sensors are redundant.
solenoid valves and the control valves are located in a
A sight glass (MBA51CF501) is installed in the common
single overall control block mounted on the supply station.
return line of the HCO supply station that leads to the tank.
Pressure limiting valves MBA54AA151 and MBA54AA152
are provided to guard against impermissible pressure
increases in the piston chambers of the HCO bearing; in Position Transducers
the event of a fault these valves route oil directly into the
Two analog position sensors (MBA10CG101/102) are
lube oil tank.
installed on the compressor bearing cover. These
The overall control block also includes the pressure transducers permit detection of the (axial) rotor shaft
content is not permitted without express written authority.
limiting valve (MBA53AA154) and the associated shutoff position and measurement of the displacement of the shaft
valve (MBA53AA251), which are used during initial filling of caused by the HCO system. In the interest of availability,
the system. redundant transducers are provided. These position
Pressure transducers MBA51CP101 und MBA51CP102 transducers are not depicted in the P+ID of the hydraulic
are used to register HCO system pressure in the common clearance optimization system supply station.
or design, are reserved.
Siemens AG 3.1-1500-0592/2
Power Generation MBA/MBD 1105E-X
Gas Turbine Compressor and Turbine / Gas Turbine Bearing
Description of Auxiliary Systems P+I Diagram Hydraulic Clearance
Optimization( HCO)
Siemens AG 3.1-1510-0592
Power Generation MBA / MBD 0106E-X
Gas Turbine Cooling and Seal Air System
Description of Auxiliary Systems P+I Diagram Turbine Cooling
Siemens AG 3.1-2010-0592
Power Generation MBH 0106E-X
Gas Turbine Cooling and Seal Air System
Description of Auxiliary Systems P+I Diagram Seal Air for Burner
Siemens AG 3.1-2210-0592
Power Generation MBH 0106E-X
Gas turbine Combustion Chamber
Description of Auxiliary Systems Combustion Chamber Instrumentation
jeopardizes stable premix combustion. evaluation unit with sensitivity set to detect natural gas
The relative combustion chamber pressure drop can flames may also be triggered by ignition gas flames to
generally be considered an indication of combustion issue a FLAME ON signal.
chamber cooling air and combustion air flows. It is In the event that fuel oil flames fail to ignite, it is
dependent on the combustion chamber geometry, but in possible that unburned fuel oil could continue to be carried
the upper load range is virtually independent of the into the combustion chamber and exhaust section (boiler)
momentary GT output. The relative combustion chamber beyond the end of the ignition monitoring period.
pressure drop changes as a result of wear or damage to A separate flame monitoring system is therefore
the burner or combustion chamber parts (changes in provided for each fuel to ensure that fuel oil and natural
geometry, changes in flow cross-section). Long-term gas flames are reliably detected.
monitoring of the relative combustion chamber pressure
Flame monitoring employs two flame detectors located
drop is performed to assess the condition of the
somewhat offset from one another on the circumference of
combustion chamber.
the combustion chamber. Each is mounted tangentially and
The differential pressure across the combustion monitors formation of the respective flames in the
chamber pCC is measured by differential pressure combustion chamber. A group of about 2 4 burners is
transducer MBM10CP101 (cf. 3.1-3010) and compressor covered by each flame detector.
outlet pressure pCII (absolute pressure) by pressure
Each flame detector consists of an optical sensor unit
transducer MBA12CP101 (cf. 3.1-3010). Signals from
and an optoelectronic converter comprising two photo-
these instruments are used to calculate the relative
sensitive elements. These 2-color sensors cover the
combustion chamber pressure drop (in percent):
spectral range from UV to IR. For this reason it is possible
pCC rel. = (pCC/pCII) x 100% to monitor all types of fuel including gas.
The intensity of the light emitted by the combustion
If the relative combustion chamber pressure drop
Class: RESTRICTED
Siemens AG 3.1-3000-9080/1
Power Generation MBM 1204E-X
Gas turbine Combustion Chamber
Description of Auxiliary Systems Combustion Chamber Instrumentation
the flame sensor distinguishes between uniform light (for elapsed or at any time during subsequent operation on fuel
example radiation of the combustion chamber lining) and oil, the supply of fuel is shut off by trip.
light emitted by flames. Signals from the uniform light The fuel oil flame monitors are set such that the ignition
sources are not registered by the flame detector. gas flames do not cause annunciation of the signal FO
The optical sensor unit and the optoelectronic converter FLAME ON.
are not housed in a common enclosure. The flame signal is
fed from two sensor units via fiberoptic Y-cables to four Flame Monitor Signals on Fuel Changeover
optoelectronic converters. The optoelectronic converters When a second fuel valve opens (NG ESV OPEN and
convert radiant energy into electric signals that are FO DM ESV OPEN), all four flame monitors are active.
forwarded to the evaluation units. Two of the evaluation Consequently the lower sensitivity of the natural gas flames
units are set to the intensity of natural gas flames and two has priority for the duration of the fuel changeover. Trip is
to the intensity of the fuel oil flames. triggered if none of the four flame monitors signal FLAME
The following tasks are performed by the evaluation ON.
units:
Monitoring of Flame Monitors
Monitoring and evaluation of flame detectors In the event of conflicting signals from the two flame
Setting the flame identity signals (natural gas and fuel monitors for a given fuel (fuel oil or natural gas), the alarm
oil) FLAME MONITORING FAULTED is annunciated after a
Generation of limits for the signal FLAME ON delay of K.FLAMM.01 has elapsed. The period
K.FLAMM.01 must be somewhat longer than the ignition
content is not permitted without express written authority.
FLAME ON is not issued by both fuel oil flame monitors term) are generated from the average of the above-
after the stipulated ignition flame cutout safety delay has mentioned measurements for acceleration monitoring
purposes.
Siemens AG 3.1-3000-9080/2
Power Generation MBM 1204E-X
Gas turbine Combustion Chamber
Description of Auxiliary Systems Combustion Chamber Instrumentation
At speeds above S.TURB.70, limits GW1 and GW2 as Operation on Fuel Oil
well as acceleration monitoring are enabled, however they If violation of limit GW1 persists for duration K.ACC.01,
are initially suppressed for delay K.BRACC.03. output is abruptly reduced by the increment E.LEIST.32. If
Limit GW1 is suppressed for the time period violation of this limit persists, output is again reduced
K.BRACC.01 during activation and deactivation of repeatedly and abruptly by the same increment each time
water/emulsion injection when operating on fuel oil. GW1 is K.BRUMM.05 has elapsed. If violation of this limit persists
not suppressed in the event of water injection system trip, despite several output reductions, rapid changeover to
because this trip can also be caused by measures to diffusion mode is initiated after time periods K.BRUMM.09
suppress combustion chamber acceleration. and K.ACC.01 have elapsed. If the gas turbine is being
Limits GW1 and GW2 are suppressed for the duration operated with water injection at this time, the water
of changeover FO DM FO PM using a staggered injection system is automatically tripped to prevent
deactivation delay of K.ACC.06. Analogously time interval extinguishing of the flames.
K.ACC.05 is used in the case of changeover from NG DM If violation of limit GW2 persists for duration K.ACC.03,
NG DM/PM DMO, NG DM/PM DMO NG PM, and NG output is reduced by increment E.LEIST.33. If violation of
DM NG PM. this limit continues, rapid changeover to diffusion mode is
On fuel changeover, limits GW1 and GW2 are initiated after time periods K.BRUMM.10 and K.ACC.03
suppressed during the time in which either the natural gas have elapsed. If the gas turbine is being operated with
system or the fuel gas system is being shut down. water injection at this time, the water injection system is
automatically tripped to prevent extinguishing of the flames.
No interlocks are provided for GW3, i.e., it is thus
content is not permitted without express written authority.
Natural gas system trip is triggered if violation of the Flashback is detected using two thermocouples per
respective limit GW1 or GW2 persists for the time burner that monitor burner temperature. Temperature is
K.BRUMM.03 and K.ACC.01 (or K.BRUMM.04 and measured at the axial swirler.
K.ACC.02) after the onset of the first output reduction. Differential temperatures are calculated from the mean
Gas turbine trip is triggered immediately if GW3 is of the compressor outlet temperature and the temperatures
violated. at the axial swirlers. If at least one differential temperature
exceeds TT.BRENNER.M01, the individual alarm
BURNER TEMPERATURE >MAX is annunciated.
Class: RESTRICTED
Siemens AG 3.1-3000-9080/3
Power Generation MBM 1204E-X
Gas turbine Combustion Chamber
Description of Auxiliary Systems Combustion Chamber Instrumentation
If a differential temperature exceeds the setting sustains a channel fault the individual alarm BURNER
TT.BRENNER.U01 for a period of at least 1s during TEMPERATURE MONITORING FAULTED is
operation in diffusion mode, startup of the premix burners annunciated.
is blocked and the alarm PM BLOCKED is annunciated. If both thermocouples of a given burner are defective,
This interlock is deactivated when the differential the individual alarm PM BLOCKED is annunciated. If this
temperature drops below TT.BRENNER.U01. fault occurs during operation in FO PM, rapid changeover
from FO PM FO DM is initiated. The machine cannot be
Burner Temperature Monitoring in Fuel Oil
returned to fuel oil premix mode until these channel faults
Premix Mode
have been rectified.
If one differential temperature exceeds the setting
In the event of failure of/faults to one or both
TT.BRENNER.U01 during operation in FO PM for a period
compressor thermocouples, a fixed value is used for
of at least one second, rapid changeover from FO PM
calculating means instead of the defective measurement
FO DM is initiated and the individual alarms BURNER
(max. value selection).
TEMPERATURE MONITORING RESPONSE, PM
BLOCKED, and BURNER INSPECTION NECESSARY Ignition System
are annunciated. Changeover back to FO PM is blocked by
an interlock. Continued operation of the GT is permissible Flames are ignited electrically. Each burner is equipped
in FO diffusion mode as well as NG diffusion or NG premix with two ignition electrodes, their tips are located at the
mode. outlet of the NG diffusion burner. Dedicated ignition
transformers (MBM12GT001 to MBM12GT024) supply the
content is not permitted without express written authority.
Failure of Burner Temperature Monitoring voltage required for ignition to the spark electrodes of the
A pretrip alarm is annunciated if individual temperature respective burners. When the ignition voltage is applied, an
measuring points at the axial swirlers fail. This does not arc forms between the tips of the two electrodes.
restrict the availability of the machine, however. If
acquisition of one axial swirler temperature measurement
or design, are reserved. Class: RESTRICTED
Siemens AG 3.1-3000-9080/4
Power Generation MBM 1204E-X
Gas Turbine Combustion Chamber
Description of Auxiliary Systems P+I Diagram Combustion Chamber
Siemens AG 3.1-3010-0592
Power Generation MBM 0106E-X
Gas Turbine Fuel Supply System (Liquid)
Description of Auxiliary Systems Fuel Oil System
Refer also to: A large portion of this equipment, including the fuel oil
filters, injection pump, as well as the emergency stop and
List of Control Settings (SREL) 3.1-0210 control valves, are compactly arranged on the fuel oil
List of Measuring Instruments 3.1-0220
package.
List of Electrical Loads 3.1-0230
Equipment List 3.1-0240 The fuel oil system is designed as leak-tight as
P+I Diagram, Fuel Oil 3.1-4010 possible. Whenever possible and appropriate, the main
Purge Water System 3.1-4800 components of the fuel oil system are described in the
Natural Gas System 3.1-5000 following in the order in which the fuel oil passes through
Hydraulic Oil System 3.1-9000
them.
Pneumatic System 3.1-9820
Settings, limits and measuring ranges of the items of Components in the Supply Line
equipment listed here are given in the List of Measuring
Instruments, the List of Electrical Loads, the Equipment List
Venting
and the List of Control Settings (SREL). This description
only gives guideline values. A venting line is connected at the highest point of the
fuel oil line upstream of the duplex filters (MBN11AT001
and MBN11AT002). Any air which may have collected
Overview during standstills to form large bubbles is fed into the
The fuel oil system supplies the burners with fuel oil auxiliary return line via orifice MBN11BP001. An additional
content is not permitted without express written authority.
and controls the volume of fuel injected into the combustion venting device is located in the upper portion of the filter.
chamber. On shutdown, it ensures that the flow of fuel oil is Any air present as small bubbles in the flowing fuel oil,
quickly and reliably shut off. which may rise in the filters (through which the fuel oil
slowly flows), is discharged through this vent and likewise
Supply of fuel oil to the system must meet various
fed into the auxiliary return line via orifice MBN11BP002.
requirements, i.e. the fuel oil must have a certain pressure,
Shutoff valves MBN11AA501 and MBN11AA502 in the
temperature, and mass flow rate and be of a precisely
filter vent lines are always open during operation of the GT.
defined quality. The requisite booster pump and treatment
Sight glass MBN11CF501 is installed in the vent line
system as well as the fuel oil tank are described elsewhere.
or design, are reserved.
Siemens AG 3.1-4000-0592/1
Power Generation 0905E-X
Gas Turbine Fuel Supply System (Liquid)
Description of Auxiliary Systems Fuel Oil System
Bladder Accumulator for Damping Pressure given measuring point is faulted and the other signals
Surges excessive temperature, this also triggers pump shutdown.
Opening the emergency stop valves, starting up and A pretrip alarm is annunciated if both thermocouples of a
shutting down the injection pump, but in particular, rapid pair are faulted.
closing of the emergency stop valves, induces sudden flow
velocity changes in the fuel oil lines that can cause Temperature Monitoring
pressure surges of considerable amplitude. Bladder Thermometer MBN11CT501 and resistance
accumulators MBN11BB001 and MBN11BB002 dampen temperature detector (RTD) MBN11CT101 provide local
these pressure peaks. and remote indication at the fuel oil package inlet. If the
temperature in the fuel oil system is high (e. g., > 40C), an
Injection Pump alarm is annunciated.
An injection pump is used to boost fuel oil pressure to Thermometer MBN17CT501 and resistance
the level required for atomization in the burners. This temperature detector (RTD) MBN17CT101 provide local
system requires 100% redundant fuel oil injection pumps, and remote indication upstream of the high pressure filter
MBN12AP001 and MBN12AP002. These are centrifugal in the diffusion line.
pumps. Thermometer MBN25CT501 and resistance
During operation of MBN12AP001 the shutoff valves temperature detector (RTD) MBN25CT101 provide local
MBN12AA253 and MBN12AA254 have to be open and the and remote indication upstream of the high pressure filter
shutoff valves MBN12AA256 and MBN12AA257 have to be in the diffusion line.
content is not permitted without express written authority.
closed.
During operation of MBN12AP002 the shutoff valves Measurement of Pump Discharge Pressure
MBN12AA256 and MBN12AA257 have to be open and the Pump discharge pressure is determined using pressure
shutoff valves MBN12AA253 and MBN12AA254 have to be transducers MBN13CP101, MBN13CP102, and
closed. MBN13CP103. This measurement is required for various
The correct position of the valves is monitored by open- and closed-loop control functions.
redundant position switches at each valve. Pressure gauges MBN12CP502 and MBN12CP503
or design, are reserved.
Back flow through the non operating pump is provide local pressure indication at the discharge of each
additionally prevented by check valves MBN12AA215 and pump.
MBN12AA216.
Both pumps are never in operation at the same time. A Minimum-flow Orifice and Shutoff Ball Valve in
pump change over has to be performed manually during the Bypass Line
standstill or during operation on gas. When injection pump MBN12AP001 (or MBN12AP002)
Pressure gauge, MBN12CP50, provides local pressure is running and emergency stop valves MBN14AA051 and
indication upstream of the pumps. MBN23AA051 have closed, pneumatically-actuated ball
valve MBN12AA053 (or MBN12AA054) in the bypass line
If at least two of the pressure measuring transducers
is opened by spring force to direct the flow into the auxiliary
MBN12CP101, MBN12CP102, and MBN12CP103 signal
return line. The pneumatically-actuated ball valve of the
that pressure upstream of the pump is too low (for example
pump that is not running remains closed.
<1bar), pump startup is prevented. If still lower limit (for
example <0.1bar) is violated during plant operation, the Minimum-flow orifice MBN12BP004 (or MBN12BP006),
pump is automatically shut down, causing the fuel oil which is installed in the bypass line upstream of ball valve
system to trip due to declining fuel oil pressure upstream of MBN12AA054, is designed such that about 20% of the
the burners. This protective shutdown is necessary due to volume flow of the injection pump operating point can be
the risk of pump cavitation associated with insufficient routed through the bypass line when the ball valve is open.
intake pressure. After ESV MBN14AA051 has opened, this ball valve is
Bearing temperatures are monitored at all four bearings closed pneumatically by actuator MBX98AS007 (or
of the pump and electric motor using dual-element MBX98AS008).
temperature instruments (MBN12CT105 to MBN12CT108 Spring force is used to open this ball valve because no
for MBN12AP001 and MBN12CT115 to MBN12CT118 for compressed air is supplied when the GT is not running.
Class: RESTRICTED
Siemens AG 3.1-4000-0592/2
Power Generation 0905E-X
Gas Turbine Fuel Supply System (Liquid)
Description of Auxiliary Systems Fuel Oil System
Safety valves inspected. These filters should not be changed over during
Safety valve MBN12AA181 (MBN12AA182) prevents fuel oil operation. This filter should only be changed over
pressure upstream of the injection pump from reaching during operation on fuel gas or the gas turbine is at a
impermissible levels. This safety valve opens at a pressure standstill. Changeover during any other operating condition
of approx. 13 bar. should not be performed.
Safety valve MBN13AA181 prevents pressure To perform a changeover, it is necessary to ensure that
downstream of the injection pump from reaching the filter has already been filled with fuel oil using valve
impermissible levels. MBN31AA252. Transfer valve MBN31AA251 should be
actuated to the opposite setting. The appropriate vent
Impermissible pressure increases can occur if high-
valve, MBN31AA501 or MBN31AA502, respectively,
density fuel oil is used and/or if pump speed is excessive,
should be opened for the first few minutes of operation on
or if the shutoff ball valve in the minimum-flow line of the
fuel oil to allow any trapped air in the filter to escape. After
operating pump is spuriously closed when emergency stop
draining by opening valve MBN31AA401 or MBN31AA402
valves MBN14AA051 and MBN23AA051 are closed. The
the fouled filter element can be removed from the filter
safety valve opens at a pressure of approx. 152bar.
housing and cleaned. Then the filter housing must be
cleaned prior to reinsertion of the clean filter element.
Diffusion System Components
Fuel Oil Lines to the Combustion Chamber
(Diffusion)
Diffusion Burner Supply Line Emergency Stop
content is not permitted without express written authority.
Siemens AG 3.1-4000-0592/3
Power Generation 0905E-X
Gas Turbine Fuel Supply System (Liquid)
Description of Auxiliary Systems Fuel Oil System
to slight differences in pressure in the combustion Pressure upstream of the emergency stop valve is
chamber. The diameter of this orifice is so small that only determined using pressure transducer MBN52CP101.
insignificant cross flows of fuel oil pass through during
operation on fuel oil. Diffusion Burner Return Line Control Valve
To prevent fuel oil from flowing from the ring line into The task of the diffusion burner return line control valve
the seal air line and from there to the compressor outlet MBN53AA151 is to regulate the return line flow. This, in
(risk of ignition!) during operation on fuel oil (postulated turn, determines the volume of fuel injected, which is the
defective seals in one of the seal air ball valves), a leakage difference between the supply line flow and the return line
oil line is provided to drain the space between the ball and flow. The control valve is actuated hydraulically. It also
valve body. Solenoid valve MBN34AA002 is open during functions as a leak-tight second shutoff element for the
fuel oil operation, allowing any leakage oil to flow through return line. Whenever the return line emergency stop valve
orifice MBN34BP001 into leakage oil tank MBN60BB001. If is closed, the associated control valve also closes.
the amount of leakage oil is so great that pressure
Pressure downstream of the control valve is determined
upstream of this orifice exceeds a defined limit, the fuel oil
using pressure transducers MBN54CP101 and
system trips when at least two of the pressure switches
MBN54CP102.
MBN34CP001, MBN34CP002, MBN34CP003 operate.
The fuel oil returning from the diffusion burners flows
through the branch lines into the return ring line. In the Premix System Components
event of a fuel oil supply fault to one of the burners during
content is not permitted without express written authority.
operation on fuel oil operation (for example swirl chamber Premix Burner Emergency Stop Valve
inlet slits clogged), the swing check valves prevent the high
Similar to the diffusion burner supply line emergency
pressure of the fuel oil in the return line from causing fuel
stop valve, the task of the premix burner emergency stop
oil to pass from the ring line through the branch line of the
valve MBN23AA051 is to enable or disenable the supply of
defective burner and into the combustion chamber
fuel oil to the premix burners. Furthermore, it is closed in
unswirled, where it could cause damage.
the event of faults requiring immediate shutdown of the gas
The return line to the fuel oil package has a connection turbine.
to the purge water system. When changing over from
The emergency stop valve is opened hydraulically. It is
or design, are reserved.
if the return line ESV does not open within a short time. pressure at the filter exceeds the setting of pressure
transducer MBN41CP101. In this case the filter should be
Siemens AG 3.1-4000-0592/4
Power Generation 0905E-X
Gas Turbine Fuel Supply System (Liquid)
Description of Auxiliary Systems Fuel Oil System
inspected immediately. These filters should not be changed pressure, which is only slightly higher, is used instead of
over during fuel oil operation. Changeover during premix the combustion chamber pressure. This parameter is
operation should not be done. measured by pressure transducers MBA12CP101 and
To perform a changeover, it is necessary to ensure that MBA12CP102.
the filter has already been filled with fuel oil using valve Pressure transducers MBN14CP101 and
MBN41AA252. Transfer valve MBN41AA251 should be MBN14CP103 in the diffusion burner supply line and
rotated to the opposite position. The appropriate vent pressure transducers MBN23CP101 and MBN23CP102 in
valve MBN41AA501 or MBN41AA502 should be opened the premix burner supply line are provided for measuring
for the first few minutes of oil operation to clear any trapped fuel oil pressure at the burners.
air from the filter. After draining by opening valve
Differential pressure is calculated by the I&C system
MBN41AA401 or MBN41AA402, the fouled filter element
from the readings of these instruments. If pressure drops
can be removed from the filter housing and cleaned. Then
below a certain differential pressure limit (appr. 10bar in the
the filter housing must be cleaned prior to reinsertion of the
diffusion burner supply line and 2bar in the premix burner
clean filter element.
supply line, 2-of-3 logic), either fuel oil system trip or
premix system partial trip is triggered.
Premix Water Purge Connection
During a premix water purge, water is directed Pressure Relief of Diffusion and Premix Systems
downstream of the siphon to inject water to the ring line (Vented Oil Seal)
and to the burners. Purging is performed whenever fuel oil
When the GT is at standstill, there is a danger that a
content is not permitted without express written authority.
is shut off. The siphon prevents water flow toward the fuel
slight amount of leakage oil may enter the combustion
oil package.
chamber via the ESVs due to pressure prevailing in the
HP Emulsion Water Connection supply line or due to the tank back pressure in the return
line. An impermissibly large amount of oil could accumulate
Emulsion water is used for NOx limitation and to in the GT during a very lengthy outage. To prevent this, the
increase power output. It is introduced into the diffusion piping sections between the premix burner supply line
and premix supply lines downstream of the siphons. It is valves (MBN23AA051, MBN23AA151), the diffusion burner
emulsified with the fuel oil by in-line static mixers supply line valves (MBN14AA051, MBN14AA151), and the
or design, are reserved.
MBN33AM001 and MBN43AM001. diffusion burner return line valves (MBN52AA051 and
MBN53AA151) is depressurized by opening solenoid
Fuel Oil Line to the Combustion Chamber
valves MBN14AA501, MBN23AA501, and MBN52AA501.
(Premix)
This diverts any oil leakages that occur into the leakage oil
The premix burner supply line with purge water tank. Very small diameter orifices installed in the relief lines
connection and the seal air line (equipped with (MBN23BP001, MBN14BP001, MBN52BP001) ensure that
pneumatically-actuated ball valve MBN44AA051) are only an insignificant amount of oil can enter the leakage oil
identical, in terms of purpose and configuration, to the fuel tank if a solenoid valve spuriously opens during fuel oil
oil diffusion burner supply line to the combustion chamber. operation.
A drain line equipped with drain valves MBN45AA401
and MBN45AA402 is connected to the lowest point of the Leakage Oil Tank
premix burner ring line. Their function is described in Leakage oil from the shutoff ball valves of the diffusion
greater detail below (cf. Trip during Operation in Premix and premix burner seal air lines, the drain line from the
Mode, and Premix Burner Reverse Purging). premix burner ring line, the vented oil seal venting lines
and from various drain lines is collected in leakage oil tank
Burner Pressure Monitoring MBN60BB001. This tank is provided with a venting line that
Proper burner function requires sufficient pressure at opens to the atmosphere.
the burner inlet (diffusion, premix burner supply line Leakage oil pump MBN60AP001 forwards oil leakages
connections) to atomize the fuel oil. Otherwise, unburned into the auxiliary return line. It is automatically started up
fuel oil could enter the combustion chamber (explosion and shut down by level monitor MBN60CL001. Level
hazard!) or hot combustion chamber gases could flow in switch MBN60CL002 annunciates Leakage oil system
the reverse direction into the burners and the fuel oil faulted if the leakage oil level exceeds a certain limit.
Class: RESTRICTED
Siemens AG 3.1-4000-0592/5
Power Generation 0905E-X
Gas Turbine Fuel Supply System (Liquid)
Description of Auxiliary Systems Fuel Oil System
diffusion burner control valve MBN53AA151. With a widely example 35% of rated speed), the volume of fuel oil
opened control valve, return line pressure is low; injected is increased with a linear time function. At turbine
consequently, a large volume of oil flows into the return line speeds above S.TURB.56 (for example 60% of rated
and only a small volume is injected. A nearly closed control speed), the slope of this time function becomes greater and
valve results in a high return line pressure. Only a small the volume of fuel oil injected increases more rapidly.
volume of oil is returned and a correspondingly large When rated speed is reached, the speed controller
volume of fuel oil is injected. assumes control of the diffusion burner control valve
actuators. The turbine-generator is then synchronized with
The amount of fuel oil entering the swirl chambers of
the electric power grid.
or design, are reserved.
turbine at standstill (or in turning gear mode). system. Automatic filling of the premix burner supply line is
The diffusion burner supply line and return line control required, if the gas turbine has not operated in fuel oil
valves are actuated to their startup lift settings. The startup premix mode for the last 24 hours. When filling is required,
Siemens AG 3.1-4000-0592/6
Power Generation 0905E-X
Gas Turbine Fuel Supply System (Liquid)
Description of Auxiliary Systems Fuel Oil System
before the changeover from diffusion mode to premix mode premix burner ESV MBN23AA051 and premix CV
the premix burner emergency stop valve opens, and the MBN23AA151. Pressure at the premix nozzles (produced
premix burner control valve is set to its minimum lift setting. by the purge water pump) still exists after trip. This ensures
The fuel oil premix burner supply lines fill with fuel oil in the that any oil remaining is displaced from the burners during
direction of the combustion chamber. The gas turbine is the first seconds of the purge operation, fully atomizes, and
monitored during this time. Fuel oil premix system trip does not form an oil film on the burner parts which could
during initial filling is triggered if a power output increase of cause coking.
2 % and thus an increased input of fuel into the combustion After the purging operation has been completed, the
chamber is detected. The gas turbine changes back into ring line remains filled with purge water to the height of the
fuel oil diffusion mode (see below), the premix burner outlet of the lowest burner. The premix burner ring line
supply line is now completely filled with fuel oil and the gas drain valves MBN45AA401 and MBN45AA402, are opened
turbine can now be changed over to fuel oil premix mode. briefly during the purging operation. This also purges the
premix burner ring line drain line with water, ensuring that
Changeover from Diffusion Mode to Premix Mode during subsequent diffusion mode operation, no oil can
Once the conditions for changeover to premix mode reenter the premix burners from this line, which would
operation have been satisfied, the premix burner seal air cause clogging of the premix burner nozzles in the lowest
ball valve MBN44AA051 is closed and the premix burner burners.
control valve is actuated to its startup lift setting. Upon completion of purging, the premix burner seal air
The premix burners must first be cooled with water to ball valve opens, i.e. cooled air from the compressor outlet
content is not permitted without express written authority.
prevent the inflowing fuel oil from coking (the premix burner is supplied to the premix burners. The gas turbine is now
nozzles are surrounded by hot air supplied by the running in diffusion mode.
compressor at a temperature of approx. 400C). To do this,
the ring line is filled with water via the purge water line. In Emulsion Mode
the process, a small amount of water enters the Emulsion mode can be selected during normal power
combustion chamber via the lower burners. As soon as the operation, the associated equipment is then automatically
ring line is completely filled with water, the supply of purge activated in deactivated. Emulsion is formed by supplying
water is shut off and the ESV opened. The flow of oil water to the fuel oil line through tee fittings at GA (premix
or design, are reserved.
initially forces the water through the premix burner nozzles, line) and GB (diffusion line). Static mixers MBN43AM001
which cools these items. After a brief transition period, all and MBN33AM001 are used to perform mixing.
nozzles are supplied with oil and stable premix flames
form. Shutdown
The control valves for fuel supply to the premix and
First the output of the GT (which is operating in
diffusion burners are then actuated such that although the
diffusion mode) is reduced. The generator is disconnected
total volume of oil injected remains constant, the premix
from the grid at a very low positive output. Fuel oil system
fraction increases and the diffusion fraction decreases.
trip is then triggered, i.e., the diffusion burner emergency
Changeover is completed when the diffusion burners only
stop and control valves in the supply and return lines close
receive the minimum flow of fuel that is necessary for
and the injection pump is shut down.
formation of the pilot flames.
The diffusion burners and their ring line are then purged
with water. With the return line ESV, and return line CV, the
Premix Mode
water forces the remaining fuel oil out of the supply lines
In premix mode, the amount of fuel required for the into the return line.
desired output is controlled using the premix burner control
The gas turbine coasts down without combustion until it
valve, whereas the diffusion system supplies the minimum
reaches turning speed. The fuel oil system is ready for the
amount of fuel required for the pilot flames.
next startup.
Siemens AG 3.1-4000-0592/7
Power Generation 0905E-X
Gas Turbine Fuel Supply System (Liquid)
Description of Auxiliary Systems Fuel Oil System
amounts of oil still in the lines must be prevented from opened, and the normal transfer to premix operation
entering the combustion chamber. This oil could undergo begins.
uncontrolled ignition on the hot walls or enter the exhaust Correct operation of the premix burner reverse purging
system as unburned fuel oil mist. Consequently, first the sequence is monitored by the temperature measuring point
diffusion system alone is purged as described under MBN45CT101A/B (duplex PT100 resistance temperature
Shutdown. In doing so, most of the oil is forced into the detector). A warning message is issued at high
return line. At the same time, premix burner ring line drain temperatures (> 100C), excessive temperatures (> 150C)
valves MBN45AA401 and MBN45AA402 are opened, and leads to shutdown of the gas turbine in 2-of-2 evaluation.
the remaining (low) combustion chamber pressure forces
The solenoid valve MBN45AA501, which is installed
the remaining oil from the premix burner ring line and the
between the premix ring line drain valves MBN45AA401
premix burners into the leakage oil tank. The solenoid
and MBN45AA402, remains open when the premix burner
valves close after a defined delay.
reverse purging sequence is not active. Upstream of the
Once purging of the diffusion system has been orifice MBN45BP001, the pressure is monitored via the
completed, the premix system is purged by opening the pressure switch MBN45CP001 to detect a possible leak of
premix purge water solenoid valve for a defined period. the drain valves.
Siemens AG 3.1-4000-0592/8
Power Generation 0905E-X
Gas Turbine Fuel Supply System (liquid)
Description of Auxiliary Systems P+I Diagram Fuel Oil
Siemens AG 3.1-4010-0592
Power Generation MBN 0106E-X
Gas Turbine Fuel Supply System (liquid)
Description of Auxiliary Systems Purge Water System
Refer also to: excessively powerful jet of water from damaging the purge
water tank.
P+I Diagram, Purge Water 3.1-4810 A hand operated shut off valve (MBN81AA251) is
List of Measuring Instruments 3.1-0220 installed in the discharge line of the tank to block the filled
List of Electrical Loads 3.1-0230 tank during maintenance work. Then the water passes from
Equipment List 3.1-0240 the shut off valve to purge water strainer MBN81AT001.
Fuel Oil System Description 3.1-4000 The strainer mesh (approx. 250m) is fine enough to retain
P+I Diagram, Fuel Oil System 3.1-4010 particles which could adversely affect the function of the
Pneumatic System Description 3.1-9800 pump or the oil burners yet coarse enough that there is no
P+I Diagram, Pneumatic System 3.1-9810 risk of clogging.
Redundant pressure transducers MBN80CP101 and
Settings, limits and measuring ranges of the items of MBN81CP102 are located downstream of the strainer. The
equipment listed here are given in the List of Measuring pressure measured is an indication of the water level in the
Instruments, the List of Electrical Loads, and the tank. Limits are defined for 4 levels. The CLOSE command
Equipment List. This description only gives guideline is issued to filling solenoid valve MBN80AA001 if the level
values. HIGH is exceeded when filling the tank. If the water level
continues to rise nonetheless (for example because the
Function solenoid-type filling valve leaks), a pretrip alarm is
annunciated when the level VERY HIGH is reached. The
The purge water system has the task of supplying a level LOW triggers opening of the filling solenoid valve
The reproduction, transmission or use of this document
sufficient amount of (demineralized) water for a variety of and is defined so that it is reached with each purging
purposes. Purge water is required whenever the GTs fuel operation. The level VERY LOW is never reached during
oil premix system or fuel oil diffusion system is shut down. normal operation and is provided solely to protect the
Purging is performed to clean the respective oil burners pump. In the event that this level is violated, the purge
a utility model or design, are reserved
and prevent coking of any oil residues that may be present. water pump is shut down and an interlock prevents pump
Purge water can also be used for various fuel oil system restart until the water level again exceeds this limit.
cooling and filling operations. Additionally the tank level can be locally read by a scale.
To fill the purge water tank, the purge water system Purge water pump MBN81AP001 is located
must be connected to the plants demineralized water downstream of the strainer. This pump is a positive
supply. displacement pump. It delivers a volumetric flow slightly
greater than that required for purging. Pressure control
Configuration valve MBN81AA151 required for starting the pump (details
are given below) is installed in a branch line. This valve
The package containing the major components of the opens at a system pressure of approx. 21bar. Safety valve
purge water system is connected by one line to the MBN81AA191 (setpoint: 25bar) protects the system
demineralized water supply and by another to the against excessive pressure. Redundant pressure
combustion chamber. transducers MBN81CP101 and MBN81CP103 are located
After each purging operation, the purge water tank downstream of the purge water pump. The difference
MBN80BB001 is refilled via the supply line from the between purge water pressure and compressor outlet
demineralized water supply. The volume of this plastic tank pressure is calculated and the volume of purge water
(500 liters) is sufficient for performing all purging and measured (MBN81CF101) to monitor the purging process.
cooling operations of a single fuel oil operating cycle in the Purging/cooling is permitted if this pressure difference
event of a failure of the tank filling system (failure of the exceeds a limit (approx. 0.4-0.5bar) or if the flow of purge
tank filling system thus does not adversely affect GT water is >3kg/s, for example. (This ensures that no oil or
availability). In addition to the connection for filling the tank, hot gas can flow in the reverse direction and enter the
the top of the tank also includes an overflow and purge water system).
connections for several return lines that are described The pressure in the purge water system downstream of
below. The tank can be drained for installation work using the pump is displayed locally by pressure gauge
shutoff valve MBN80AA401. MBN81CP501.
Class: RESTRICTED
Flow limitation orifice MBN80BP001 in the supply line The purge water line leads from the package to the
to the tank restricts the flow of water to prevent an combustion chamber. This line branches downstream of
pressure gauge MBN81CP501 into lines leading for the
Siemens AG 3.1-4800-0592/1
Power Generation 0905E-X
Gas Turbine Fuel Supply System (liquid)
Description of Auxiliary Systems Purge Water System
diffusion burners, equipped with pneumatic valves certain amount of water is first fed through the burners
MBN83AA051 and MBN83AA052 (supply line) and before they are supplied with fuel oil.
MBN83AA053 and MBN83AA054 (return line), and for the 2. Following changeover from FO premix to diffusion
premix ring line, equipped with pneumatic valves mode, the premix burners must be purged to
MBN84AA051 and MBN84AA052. Each pneumatic valve is displace any fuel oil remaining in these burners and the
equipped with a pneumatically-assisted 5/2 solenoid associated ring line. Due to differences in elevation, oil
directional control valve actuator; specifically remaining in the lines would otherwise flow into the
MBN83AA051(A) and MBN83AA052(A) diffusion supply, combustion chamber via the lower burners without
MBN83AA053(A) and MBN83AA054(A) diffusion return being atomized. This, too, could result in coking on
and MBN84AA051(A) and MBN84AA052(A) premix ring burner parts.
line. The control air for actuation of these valves is
3. Following shutdown of the fuel oil diffusion system, the
supplied from the pneumatic station at connection FE. Cf.
diffusion burners must be purged for the same
Section 3.1-9800 for a detailed description of the
reasons as given in 2).
pneumatic station. If one of the pneumatic valves
spuriously remains open following a purge operation 4. When changing over from NG operation to FO
reverse flow of oil (during fuel oil operation) or seal air operation, the return line from the FO diffusion burners
(during natural gas operation) into the purge water system must be filled prior to opening the return line ESV.
is prevented. The pressure between the pneumatic valves When the fuel oil system is shut down, air pockets may
can be relieved via a pressure relief line fitted with the form at the highest point of the return line. This air is
respective orifice MBN83BP001 (diffusion supply), forced into the supply line via orifice MBN36BP001 (cf.
P+I diagram 3.1-4010, Fuel Oil System"). This
The reproduction, transmission or use of this document
Siemens AG 3.1-4800-0592/2
Power Generation 0905E-X
Gas Turbine Fuel Supply System (liquid)
Description of Auxiliary Systems P+I Diagram Purge Water
Siemens AG 3.1-4810-0592
Power Generation MBN 0106E-X
Gas Turbine Fuel Supply (Gaseous)
Description of Auxiliary Systems Natural Gas System
Siemens AG 3.1-5000-0592/1
Power Generation 0106E-X
Gas Turbine Fuel Supply (Gaseous)
Description of Auxiliary Systems Natural Gas System
Vented Gas Seal Function Its function is to enable or disenable the flow of natural
gas to the burners on startup and shutdown of the gas
The vented gas seal in the natural gas system turbine. It is closed in the event of faults which require the
comprises natural gas emergency stop valve immediate interruption of the supply of natural gas to the
MBP13AA051, which constitutes the first shutoff element, gas turbine. The NG ESV is opened hydraulically and
and also natural gas diffusion burner control valve closed very rapidly by spring force (in less than one
MBP21AA151, natural gas premix burner control valve second). The hydraulic actuator mechanism is described in
MBP22AA151, and pilot gas control valve MBP23AA151, Section 3.1-9200, Hydraulic Oil for Natural Gas Valves.
which collectively constitute the second shutoff element.
Pressure relief valve MBP13AA501 is located between the
first and second shutoff elements. Natural Gas Diffusion Burner Control
The vented gas seal reliably isolates the gas system Valve (Second Shutoff Element)
when the latter is not active. The vented gas seal The natural gas diffusion burner control valve (NG DM
comprises a tight-closing, dual-element shutoff device CV) is a leaktight and fail-safe shutoff valve which, in
whose valves have a fail-safe closing energy. These valves addition to controlling the mass flow of natural gas, also
close automatically in the event of a loss of opening energy functions as a shutoff element. The NG DM CV, together
(for example, hydraulic pressure). This is achieved using a with the premix and pilot gas control valves, constitutes the
spring that is compressed by the opening energy and second shutoff element of the vented gas seal. Fail-safe
released when such force is no longer applied, actuating means that the valve in question closes automatically on
content is not permitted without express written authority.
Offenders will be liable for damages. All rights, including rights
The reproduction, transmission or use of this document or its
the valve to its CLOSED position. loss of opening energy. As with the emergency stop valve,
A pressure relief valve located between the first and this is achieved using a spring that is compressed when
second shutoff elements is open when these shutoff the valve is opened. When the opening force is no longer
elements are closed. This depressurizes the piping section applied, the compressed spring extends and closes the
between the shutoff elements. valve.
In the event of a postulated valve seat leak in the The natural gas diffusion burner control valve
natural gas emergency stop valve, pressure cannot build modulates the flow of natural gas supplied to the diffusion
up upstream of the natural gas control valves as the burners as stipulated by the gas turbine controller.
associated gas leakage is routed via the relief line to a Requisite actuation of the diffusion burner control valve is
design, are reserved.
location which is not critical and released. This reliably performed hydraulically. Section 3.1-9200, Hydraulic Oil
prevents unintentional flows of natural gas from entering for Natural Gas Valves, elucidates the function of the
the combustion chamber and also prevents air from the hydraulic actuator in detail.
compressor outlet or combustion gases from ingressing A bore is provided in the bottom of the natural gas
into the natural gas supply network. diffusion system control valve for connection to the
The pressure relief valve is closed when the GT is automatic draining system. The functional principle of the
operated on natural gas. The first shutoff element and, automatic draining system is elucidated in description 3.1-
depending on the operating mode, one or more of the 5300.
control valves that constitute the second shutoff element
are open at this time.
Natural Gas Premix Burner Control Valve
(Second Shutoff Element)
Natural Gas Pressure Relief Valve
The natural gas premix burner control valve (NG PM
The natural gas pressure relief valve is part of the CV) is actuated in accordance with the requirements of the
vented gas seal and permits depressurization of the piping gas turbine operating modes and regulates the natural gas
sections between the first and second shutoff elements mass flow to the premix burners. In addition to its control
when the natural gas system is not active. The vented gas function, the natural gas premix burner control valve is an
seal is described in detail in the subsection Vented Gas element of the vented gas seal that also includes the
Seal Function. diffusion and pilot gas control valves. As the function of the
premix burner control valve is equivalent to that of the
Natural Gas Emergency Stop Valve (First diffusion burner control valve, please refer to subsection
Natural Gas Diffusion Burner Control Valve for details.
Shutoff Element)
Class: RESTRICTED
Siemens AG 3.1-5000-0592/2
Power Generation 0106E-X
Gas Turbine Fuel Supply (Gaseous)
Description of Auxiliary Systems Natural Gas System
draining system. The functional principle of the automatic control valve. The amount of condensation that forms can
draining system is elucidated in description 3.1-5300. be so large as to impair availability when the NG burners
are reactivated after an extended period of operation in NG
PM or on fuel oil.
Pilot Gas Control Valve (Second Shutoff
Small amounts of ignition gas (propane, butane) that
Element)
accumulate after a fuel oil start or FO that has accumulated
Like the natural gas diffusion and premix burner control during operation on FO, possibly along with condensation
valves, the pilot gas control valve (PG CV) is a leaktight that collects in the NG DM line, may cause damage to the
and fail-safe shutoff valve which, in addition to controlling supply piping when the NG burners are activated.
the mass flow of pilot gas, is also part of the vented gas The condensation (including ignition gas and fuel oil
seal. constituents) that accumulates is drained from the lowest
The pilot flames are diffusion flames that are required in points of the connecting pipes to the automatic draining
natural gas premix mode to stabilize the premix flames. system via lines that are laid with a negative slope. The
The PG CV controls the flow of natural gas to the pilot functional principle of the automatic draining system is
gas burners. The flow of pilot gas is set as a function of elucidated in description 3.1-5300.
NOX emissions data, flame stability, and the humming and In addition, some of the branch lines from the ring line
vibration behavior of the gas turbine. Characteristics stored to the diffusion burners are also heated.
in the controller are used to stipulate the flow of pilot gas as
appropriate to the operating mode.
content is not permitted without express written authority.
Offenders will be liable for damages. All rights, including rights
The reproduction, transmission or use of this document or its
involve temperatures below the dew point and thus well as on the OM system.
accumulation of condensation in the branch line and in the
natural gas connecting lines upstream of the respective NG
Siemens AG 3.1-5000-0592/3
Power Generation 0106E-X
Gas Turbine Fuel Supply (Gaseous)
Description of Auxiliary Systems Natural Gas System
To ensure reliable operation of the gas turbine in all Pilot gas can be supplied via the pilot gas control valve
operating modes (diffusion and premix), the natural gas as required for flame stabilization and mitigation of
pressure is checked for violation of prescribed maximum combustion oscillations.
and minimum limits. Actions appropriate to the respective Operation in straight NG diffusion mode (with the
operating mode are initiated if these limits are violated: diffusion burners exclusively) is only possible up to a
certain turbine outlet temperature, which corresponds to an
All Operating Modes output of less than 25% base load, for example. Flame
If the natural gas pressure (MBP14CP101) downstream instabilities can occur during operation in diffusion mode
of the natural gas emergency stop valve exceeds limit above this temperature.
P.GAS.11, the pretrip alarm NG PRESSURE
Natural Gas Premix Mode (NG PM)
DOWNSTREAM OF NG ESV TOO HIGH >MAX is
annunciated. The natural gas diffusion burner control valve is closed
during operation in straight NG premix mode. The natural
Natural Gas Diffusion Mode (NG DM) gas premix burner control valve regulates the mass flow of
the main flow of fuel supplied to the burners; the PG CV
The pretrip alarm NG PRESSURE LOW <MIN is establishes the PG mass flow required to stabilize the
annunciated if natural gas pressure measured by natural gas premix flames.
MBP13CP101/MBP13CP102/MBP13CP103 declines
Straight natural gas premix mode operation (without the
below limit P.GAS.06 when the natural gas supply
natural gas diffusion burners) can be implemented over the
system is active. Changeover from NG DM to NG PM is
content is not permitted without express written authority.
Offenders will be liable for damages. All rights, including rights
The reproduction, transmission or use of this document or its
Siemens AG 3.1-5000-0592/4
Power Generation 0106E-X
Gas Turbine Fuel Supply (Gaseous)
Description of Auxiliary Systems Natural Gas System
If ignition is successful, the NG DM CV begins to open When the NG DM CV has reached its shutdown lift
in accordance with a timing function, gradient setting, it is abruptly actuated to its CLOSED setting
JK.EGDB.01, after speed S.TURB.53 has been and the NG PM CV is opened correspondingly. The gas
exceeded. This continuously increases the mass flow of turbine is now operating in premix mode.
natural gas. The GT thus produces more torque, which, The load setpoint or temperature setpoint of the turbine
together with the torque of the SFC, further accelerates control system is reenabled and the enable issued for
the GT. synchronizing the gas turbine.
The pilot gas control valve or PM control valve is After synchronization the load controller stipulates the
opened as required. requisite mass flow of fuel.
When speed S.TURB.54 is exceeded, the control valve
is opened further at the second, steeper gradient Shutdown
JK.EGDB.02. Shutdown is defined as controlled rundown of the gas
When speed S.TURB.104 is exceeded, the control turbine from a speed synchronous with the grid to standstill
valve is opened further at the third gradient or turning speed. The shutdown sequence from load
JK.EGDB.05. operation to isolation of the fuel valves is described in the
following subsection. Unloading of the gas turbine begins
Once the turbine-generator has been accelerated to a
when operating personnel selects shutdown. This also
speed of S.TURB.17, known as the self-sustaining
entails the following steps:
speed, the startup frequency converter is shut down.
As unloading of the gas turbine continues, the natural
content is not permitted without express written authority.
Offenders will be liable for damages. All rights, including rights
The reproduction, transmission or use of this document or its
been met. grid, natural gas system trip is triggered and excitation
Activation of the natural gas premix burners involves of the generator discontinued. The natural gas
the following steps: emergency stop valve and the natural gas premix
burner control valve are closed. The vented gas seal is
Load setpoint control is blocked.
closed when the fuel valves have closed and the
The natural gas premix burner control valve is abruptly natural gas pressure relief valve has opened.
actuated by a certain amount at the beginning of
The GT coasts down without combustion until it
changeover. The premix lines then fill with fuel.
reaches turning speed. The natural gas system is now
Pilot gas is required in straight premix mode for ready for the next start.
stabilizing the premix flames. The controller stipulates
the flow of pilot gas using stored characteristics after
the filling operation has been completed. The pilot gas Fault Management
control valve is actuated to the stipulated lift setting The following describes how faults which may occur
prior to changeover, i.e., reciprocal actuation of the during operation can be managed as well as the switching
natural gas diffusion and premix burner control valves. operations which take place in the natural gas system
In doing so, the apportioner allows for the pilot gas flow during such faults.
and actuates the NG diffusion and premix burner
control valves correspondingly to ensure that the Load Rejection to Full Speed No Load or
overall amount of fuel supplied remains constant. Auxiliary Power (Output 40% BL)
When the pilot gas control valve has reached its premix If the gas turbine is disconnected from the grid during
mode lift setting, inverse and reciprocal adjustment of power operation by opening the generator breaker, the
the DM and PM fractions is commenced. The natural mechanical power consumed by the generator suddenly
Class: RESTRICTED
gas mass flow remains nearly constant during the becomes zero. The power produced by the turbine then
changeover operation. increases shaft speed.
Siemens AG 3.1-5000-0592/5
Power Generation 0106E-X
Gas Turbine Fuel Supply (Gaseous)
Description of Auxiliary Systems Natural Gas System
Siemens AG 3.1-5000-0592/6
Power Generation 0106E-X
Gas Turbine Fuel Supply System (gaseous)
Description of Auxiliary Systems P+I Diagram Natural Gas
Siemens AG 3.1-5010-0592
Power Generation MBP 0106E-X
Gas Turbine Fuel Supply System (gaseous)
Description of Auxiliary Systems Automatic Draining of the NG System
Refer also to: damage to the supply piping when the NG burners are
activated.
List of Control Settings (SREL) 3.1-0210
List of Measuring Instruments 3.1-0220
List of Electrical Loads 3.1-0230 Drainage System Components
Equipment List 3.1-0240
Requirements for GT Working Media 3.1-0260
Natural Gas System 3.1-5000 Drain Valves
P+I Diagram, Natural Gas 3.1-5010 NG connecting lines and the NG control valves are
P+I Diagram, Automatic Draining of the
emptied into drainage tank MBP40BB001 via electrically-
NG System 3.1-5310
actuated drain valves MBP31AA401, MBP32AA401, and
MBP33AA401. Together with tank drain valve
Overview MBP40AA401 and venting valve MBP40AA501, these
During operation on natural gas (NG) and fuel oil (FO), drain valves constitute a dual element shutoff device. The
condensation may form in those natural gas connecting drain valves are closed when deenergized and each is
lines between the natural gas package and the ring lines equipped with a limit switch for the CLOSED setting.
through which no medium flows at that time. This Crossflow between the NG DM, NG PM, and PG piping
condensation is routed into a drainage tank by electrically- via the drainage system is prevented by actuating the drain
actuated drain valves. valves accordingly.
During the draining process it is possible that not only These valves are protected against excessive
content is not permitted without express written authority.
condensation, but also ignition gas (propane, butane), and temperatures by the drainage procedure itself, limitation of
natural gas as well as fuel oil are carried into the drainage the drainage time per drainage cycle, and by monitoring
tank. Gas separates from the liquid in the drainage tank. the settings of the associated valves.
Gas is released to the atmosphere via a venting valve. The
liquid collects in the tank. Drainage Tank
A solenoid valve that is actuated on the basis of tank Drainage tank MBP40BB001 is used to collect and
level allows the condensation collected to flow out of the separate liquid and gas. Venting valve MBP40AA501 is
drainage tank and into a downstream system for disposal. used to vent this tank. This tank is equipped with safety
or design, are reserved.
Siemens AG 3.1-5300-9070/1
Power Generation MBP 0704E-X
Gas Turbine Fuel Supply System (gaseous)
Description of Auxiliary Systems Automatic Draining of the NG System
The venting valve is opened for a defined time at Any faults to the drainage system during GT operation
certain intervals, during and/or after each natural gas result in annunciation of a pretrip alarm.
piping draining procedure, and during drainage of the tank It is also possible to start the draining procedure
itself. manually when the gas turbine is at a standstill.
Operating Modes The tank drain valve can only be opened if the level in
the drainage tank is higher than a certain point. This
The automatic draining procedure for the PG, NG, PM, ensures that no gas can escape via the tank drain line
and/or NG DM piping is started: when the drain valve is open.
Before GT startup, The tank drain valve is closed when the drainage tank
After each time the gas turbine is shut down (including level drops below a defined lower level.
all GT trips), An alarm is annunciated if the level in the drainage tank
or design, are reserved.
Every two hours during operation in NG PM (applies declines further. In such cases there is a risk that gas can
only to DM piping), escape via the drain line.
After each start on fuel oil,
Every 2 hours during operation on fuel oil, Monitoring and Fault Considerations
After performing off-line compressor cleaning. In the event of an outage of the drainage system,
startup on NG as well as operation on either NG or FO are
Draining Procedure still permissible. Failed starts or fuel changeover problems
All valves of the drainage system must have a defined may occur, however.
initial setting before commencing the draining procedure, If faults to or an outage of the drainage system occur
i.e., the piping drain valves and the tank drain valve must prior to a fuel oil start, startup on this fuel is prevented.
be closed. Depending on the operating condition of the GT,
the venting valve may be either open or closed. If the GT is Drain Valve Limit Position Monitoring
running, the venting valve remains closed during the
The drain valves are each equipped a limit switch for
draining procedure. After completion of the draining
the CLOSED setting. A pretrip alarm is annunciated if
operation, the drainage tank venting valve is opened and
more than one of these valves is not CLOSED.
the gas in the tank can escape to the atmosphere. The
venting valve is open when the draining procedure is If one of the drain valves (PM, DM, PG) and the venting
performed with the gas turbine at a standstill. valve or tank drain valve do not simultaneously signal
CLOSED, an uncontrolled flow of air from the compressor
At the beginning of draining during gas turbine
outlet can enter the drainage system and thus escape to
operation the venting valve is opened to depressurize the
the atmosphere. Gas turbine trip is triggered in such cases.
drainage tank. Thereafter the venting valve is closed to
A pretrip alarm is annunciated if cross flow occurs
Class: RESTRICTED
Siemens AG 3.1-5300-9070/2
Power Generation MBP 0704E-X
Gas Turbine Fuel Supply System (gaseous)
Description of Auxiliary Systems Automatic Draining of the NG System
when the drain valve is open. formation of ice which can in turn cause disturbances. The
The venting valve is equipped with a limit switch for the associated temperature monitoring function blocks the
CLOSED setting. draining system if temperature declines below a certain
If the venting valve fails to close due to a fault, an limit; this triggers an alarm and the operator is instructed to
interlock prevents opening of the drain valves while the GT open the venting valve manually.
is running. If the temperature exceeds the tank design
A pretrip alarm is annunciated if the venting valve fails temperature, an alarm is annunciated, the drainage system
to open due to a fault. blocked, and a close command issued to the drain valves.
or design, are reserved. Class: RESTRICTED
Siemens AG 3.1-5300-9070/3
Power Generation MBP 0704E-X
Gas Turbine Fuel Supply System (gaseous)
Description of Auxiliary Systems P+I Diagram Automatic Draining
of the NG System
Siemens AG 3.1-5310-0592
Power Generation MBP 0106E-X
Gas Turbine Ignition Fuel Supply
Description of Auxiliary Systems Ignition Gas System
Refer also to: separate equipment package located near the ignition gas
tank. For maintenance purposes the ignition gas supply
List of Control Settings (SREL) 3.1-0210 can be shut off using this manual isolation valve.
List of Measuring Instruments 3.1-0220
The other valves are mounted on the ignition gas
List of Electrical Loads 3.1-0230
package itself.
Equipment List 3.1-0240
Combustion Chamber Instrumentation 3.1-3000 Pressure control valve MBQ12AA151 reduces ignition
P+I Diagram, Combustion Chamber 3.1-3010 gas pressure to the level required for ignition. It ensures
Fuel Oil System 3.1-4000 that the flow of ignition gas is independent of tank pressure.
P+I Diagram, Ignition Gas 3.1-6010 Gauge MBQ12CP501 is provided downstream of the
pressure control valve for checking the ignition gas
Settings, limits, and measuring ranges of the devices pressure. Shutoff valve MBQ12AA301 can be closed for
referred to here are given in the List of Measuring performing maintenance on the pressure gauge.
Instruments, Equipment List, and List of Control Settings Shutoff valve MBQ13AA251 is always open in the
(SREL). This description only gives guideline values. operating condition, however can be closed if necessary to
perform maintenance.
Function Check valve MBQ13AA201 is located in the
downstream section of the ignition gas line and protects the
The gas turbine (GT) can be operated on fuel oil or
ignition gas system against the ingress of natural gas or
natural gas.
compressor outlet air.
rights created by patent grant or registration of a utility
The reproduction, transmission or use of this document or its
content is not permitted without express written authority.
Offenders will be liable for damages. All rights, including
ignite the fuel oil. The ignition gas system supplies the the ignition gas valves opened.
burners with ignition gas at the correct point in time to form Opening of these two ignition gas valves supplies
ignition flames. Once a certain speed has been reached, ignition gas to the burners and the startup operation
conditions in the combustion chambers are such that the continues.
fuel oil flames burn stably and the supply of ignition gas
Power is supplied to the ignition transformers
can be shut off.
concurrent with opening of the ignition gas valves. An
electric arc forms between the two electrodes of the igniter
Function which ignites the ignition gas as it emerges from the natural
gas diffusion burners (cf. description 3.1-3000,
Ignition gas is supplied from tank MBQ10BB001. This
Combustion Chamber Instrumentation).
tank, its filler valve and shutoff valve, and the associated
safety and control devices are described elsewhere. Fuel oil injected into the combustion chamber is then
ignited by the ignition flames.
Ignition gas valves MBQ11AA001 and MBQ13AA001,
together with ignition gas relief valve MBQ13AA501, When the speed end of ignition is reached, the ignition
constitute a vented gas seal. When the ignition gas system gas valves are closed and power to the ignition
is not activated, the ignition gas valves are closed, the transformers cut off, as the FO flames are now stable and
ignition gas pressure relief valve is open, thereby self-sustaining. When both ignition gas valves have fully
depressurizing the region between these two ignition gas closed, the pressure relief valve is opened and gas in the
valves. During the ignition sequence the ignition gas valves pipe section between the two ignition gas valves is vented.
are opened and the ignition gas pressure relief valve is This concludes the ignition sequence proper.
closed. To ensure that no other valve switching conditions The complete fuel oil startup sequence is described in
occur, the OPEN status of the ignition gas valves and the detail in Section 3.1-4000, Fuel Oil System.
CLOSED status of the ignition gas pressure relief valve are
each monitored with two limit switches.
Fault Considerations
Class: RESTRICTED
Siemens AG 3.1-6000-0592/1
Power Generation MBQ 0905E-X
Gas Turbine Ignition Fuel Supply
Description of Auxiliary Systems Ignition Gas System
If one of the two ignition gas valves is not open or the If a spurious lift setting of either ignition gas valve or the
ignition gas pressure relief valve is not closed during ignition gas pressure relief valve is detected at times other
startup, the start is aborted. than during the startup sequence, a pretrip alarm is
annunciated.
rights created by patent grant or registration of a utility
The reproduction, transmission or use of this document or its
content is not permitted without express written authority.
Offenders will be liable for damages. All rights, including
Siemens AG 3.1-6000-0592/2
Power Generation MBQ 0905E-X
Gas Turbine Ignition Fuel Supply
Description of Auxiliary Systems P+I Diagram Ignition Gas
Manual
Connection P+I Diagram
section
Connection BI Natural Gas 3.1-5010
Siemens AG 3.1-6010-0592
Power Generation MBQ 0106E-X
Gas Turbine Additive System
Description of Auxiliary Systems Water Injection
emulsion mode (EMU mode) the NOX water injection the filter. As soon as water can be seen in sight glass
system supplies the desired amount of water at the MBU24CF501, shutoff valve MBU24AA501 is closed.
requisite pressure into the FO supply line in the fuel oil Because of the typically high purity of the water
premix (FO PM) system and if necessary into the fuel oil supplied, this filter is designed as a single element filter.
a utility model or design, are reserved
diffusion (FO DM) system, in each case at a point located a The degree of filter fouling can be checked locally on
short distance upstream of the ring lines on the combustion differential pressure display MBU24CP501. The filter
chamber. Mixing of fuel oil and water is achieved with the should be cleaned when the pressure drop exceeds 0.5
aid of a static mixer located in each of the respective pipes bar.
from the fuel oil package to the ring lines. Emulsion mode
To clean the filter, the water injection system must be
operation renders flame temperatures more uniform.
shut down and the manual shutoff MBU24AA251 in the
Reduction of local temperature peaks inhibits the formation
supply line closed. After draining a certain volume of water
of NOX.
via shutoff valve MBU24AA401, the fouled filter cartridge
The water contained in the emulsion is evaporated in can be removed from the filter housing for cleaning. Then
the combustion chamber and superheated to the turbine the filter housing itself must be cleaned prior to reinsertion
inlet temperature. The absorbed heat flow permits a higher of the clean filter cartridge.
fuel mass flow at a given compressor mass flow and
A thermometer, MBU24CT501, and double resistance
turbine inlet temperature than is possible with dry
temperature device (RTD), MBU24CT101, provide local
combustion. This increases the possible GT output
and remote temperature indication upstream of the filter.
(compressor IGVs fully open, turbine inlet temperature
equal to base load temperature). A pressure transmitter, MBU24CP101, provides local
and remote ressure indication upstream of the filter.
At high ambient temperatures, the base load of the GT
achievable with dry combustion is less than the maximum
Redundant Injection Pumps
permissible limit output. Injection of emulsion increases the
achievable output. GT efficiency unavoidably decreases, An injection pump is used to boost water to the level
because water must be supplied and its evaporation is of required for injection of emulsion into the combustion
no energetic benefit. chamber. This system requires 100% redundant water
injection pumps, MBU25AP001 and MBU25AP002. These
Water of a precisely defined quality must be supplied at
are centrifugal pumps.
the appropriate pressure, mass flow and temperature. The
corresponding requirements and the associated feeder and During operation of MBU25P001 the shut-off valves
MBU25AA251 and MBU25AA252 have to be open and the
Class: RESTRICTED
Siemens AG 3.1-7000-0592/1
Power Generation 0905E-X
Gas Turbine Additive System
Description of Auxiliary Systems Water Injection
During operation of MBU25AP002 the shut-off valves Monitoring of Injection Pump Pressure
MBU25AA262 and MBU25AA263 have to be open and the The NOX water pump discharge pressures are
shut-off valves MBU25AA251 and MBU25AA252 should be continuously monitored by MBU25CP101, MBU25105 and
closed. MBU25CP106. Water injection system trip is triggered as
The correct position of the valves is monitored by soon as at least two of the pressure measuring transducers
redundant position switches at each valve. dips below a certain level.
Both pumps are never in operation at the same time. A Additionally a pressure gauge, MBU25CP503
pump switch over has to be performed manually during (respectively MBU25CP513), and a pressure transmitter,
stand still or during Gas operation. MBU25CP110 (respectively MBU25CP111), provide local
If pressure switch MBU25CP001 indicates that and remote pressure indication downstream of each pump.
pressure is too low (for example <0.6bar) or if the
temperature measured by temperature switch Vented Emulsion Seal
MBU25CT001 is too high (for example >70C), startup of Emergency stop valves MBU41AA051 and
the water injection pump is blocked or, if these readings MBU46AA051 have two tasks. The first is to enable or
occur during operation with water injection, the NOX water disenable water injection; when closed they perform the
injection pump is shut down. Because of the risk of second task of preventing fuel oil from flowing in the
cavitation, this pump may not be operated if intake reverse direction and into the water system. These
pressure is too low or temperature is too high. emergency stop valves are actuated hydraulically. The
The operating pump is shut down if its delivery rate as functional principle of these valves is not the subject of this
The reproduction, transmission or use of this document
of the pump and electric motor using dual-element (MBU41AA151 or MBU46AA151) to the leakage oil system
temperature instruments (MBU25CT105 to MBU25CT108 is relieved in the sense of a vented fuel oil seal. This
for MBU25AP001 and MBU25CT115 to MBU25CT118 for configuration involves orifice MBU41BP001 and
MBN12AP002). If both elements of any one of these electrically-actuated solenoid valve MBU41AA052 (or
bearing temperature measuring points registers excessive MBU46BP001 and MBU46AA052) in the respective line to
temperature, the pump is shut down. If one element of a the oil collecting tank MBU47BB001. Relief valves
given measuring point is faulted and the other signals MBU41AA052 and MBU46AA052 are actuated
excessive temperature, this also triggers pump shutdown. pneumatically by valves MBX69AA001 and MBX69AA002,
A pre-trip alarm is annunciated if both thermocouples of a respectively. A ball valve MBX69AA251 is provided in the
pair are faulted. pneumatic feed line. A position feed back is given for the
open position to the control system.
Automatic Recirculation Check Valve The piping systems for FO DM on emulsion and FO PM
Automatic recirculation check valve MBU25AA051 on emulsion are configured identically. The dual-element
(respectively MBU25AA052) functions as a minimum-flow shutoff to the FO DM branch comprises emergency stop
valve. During operation in emulsion mode the automatic valve MBU41AA051 and combined control/emergency stop
recirculation check valve routes the pump discharge to the valve MBU41AA151 and the corresponding valves
burner supply line; the branch to the integrated minimum MBU46AA051 and MBU46AA151 to the FO PM branch.
flow orifice is closed in the direction of the minimum flow The combined control/emergency stop valves have two
line. During startup of the water pump with tasks: As control valves, they regulate the flow of water to
control/emergency stop valves MBU41AA151 and be injected for NOX control. They also have an emergency
MBU46AA151 still closed and during operation with low stop function, i.e. when trip is triggered, they are rapidly
injection volumes, the minimum flow drain of the automatic and reliably closed by spring force. They are opened
recirculation check valve opens and directs a defined flow hydraulically (cf. description 3.1-9300, Hydraulic Oil
of water into the minimum flow line. This ensures that the System). During normal operation, the full-stroke
NOX water injection pump delivers at least the minimum positioning time is 5.6 seconds; full-stroke closing time in
required flow (via the automatic recirculation check valve) the event of trip is less than 300ms.
Class: RESTRICTED
Siemens AG 3.1-7000-0592/2
Power Generation 0905E-X
Gas Turbine Additive System
Description of Auxiliary Systems Water Injection
setpoint are detected by flowmeters MBU43CF101 and upstream of the two water injection emergency stop valves,
MBU48CF101. If this monitoring function detects an measured by pressure transducers MBU25CP101,
impermissibly high deviation, water injection system trip is MBU25CP105 and MBU25CP106, exceed a certain level,
triggered. first emergency stop valve MBU46AA051 is opened and
then combined control/emergency stop valve
a utility model or design, are reserved
Siemens AG 3.1-7000-0592/3
Power Generation 0905E-X
Gas Turbine Additive System
Description of Auxiliary Systems Water Injection
achieved by deenergizing the solenoid valves of the valve Manual Control Actions
actuators.
If the water injection system is operating, normal
shutdown of this system can be initiated by manually
Control Deviations of the Water Mass Flow
selecting dry and the GT then operated in the output
Controller
range that is permissible without water injection.
If deviations from the prescribed water mass flow occur,
As a matter of principle, emulsion mode can always be
increased NOX emissions or extinguishing of the flames is
preselected by actuating the corresponding selector switch.
possible.
The system can only be started up, however, when the gas
Water injection system trip is triggered immediately in turbine is operating in the output window in which activation
either case if the control deviation exceeds a certain limit of water injection is enabled. System startup is then
(for example 5%) within a certain time (for example 10s). performed automatically.
The cause of this control deviation must be investigated
The water injection emergency stop valves and the
before emulsion mode is resumed.
combined control/emergency stop valves can be closed
manually during operation of the water injection system by
Monitoring the Closing Time of the Control and
triggering water injection system trip. The water injection
Emergency Stop Valves
pump can be shut down manually during operation of the
If the emergency stop valves or the combined water injection system. This causes a drop in water
control/emergency stop valves have not closed within a pressure downstream of the pump and triggers water
certain time following a trip command (e.g. 0.5s in the injection system trip.
The reproduction, transmission or use of this document
Siemens AG 3.1-7000-0592/4
Power Generation 0905E-X
Gas Turbine Additive System
Description of Auxiliary Systems P+I Diagram Water Injection
Siemens AG 3.1-7010-0592
Power Generation MBU 0106E-X
Gas Turbine Lubricant Supply System
Description of Auxiliary Systems Lube and Jacking Oil System
rotating shafts from the bearing shells and thus circulation and the ingress of ambient air into the system
minimizes friction when the respective fan is not running. Pressure
to remove heat and solid particles from the bearing transducer MBV50CP101 monitors the vacuum in the lube
area oil tank. Pressure gauge MBV50CP501 displays this
a utility model or design, are reserved
Siemens AG 3.1-8000-0592/1
Power Generation 0905E-X
Gas Turbine Lubricant Supply System
Description of Auxiliary Systems Lube and Jacking Oil System
Lube Oil Cooler The auxiliary oil pump and emergency oil pump are
started concurrently and without delay if lube oil pump
Cooler MBV23AC is located in the lube oil supply line. pressure declines below the setting of pressure transducer
The control valve MBV24AA151 is used to control lube oil MBV26CP102 (for example, 1.5bar), or if the lube oil
temperature by adjusting the fraction of lube oil which is fed supply pressure measured downstream of the connection
through the cooler bypass line. The position of the of the discharge line from the emergency oil pump to the
temperature control valve is regulated by oil temperature in lube oil supply line by pressure transducer MBV26CP101
the supply line behind the cooler. Adjustable orifices dips below limit P.SCHMOEL.01 (for example, 1.5bar). It is
MBV22AA281 in the cooler bypass line and MBV24AA281 necessary to shut off the emergency lube oil pump
downstream of the point where the bypass line joins the manually once it has been ascertained that the auxiliary
main supply line permit adjustment and precise control of pump has reached its nominal pumping parameters.
the mass flow of lube oil supplied to the bearings.
The emergency oil pump is started immediately if lube
oil pressure declines below the setting of pressure
Lube Oil Filters transducer MBV26CP103 (for example, 1.0bar) or
MBV26CP003 (for example, 1.0bar).
Behind the lube oil cooler the cooled lube oil is fed
through filter MBV25AT001 or MBV25AT002. Pressure Gas turbine trip is triggered if at least two of the
drop across the filter is monitored by differential pressure following three signals are issued:
switch MBV25CP001. If the pressure drop exceeds the Lube oil pressure declines below the setting of pressure
setpoint of the differential pressure switch pretrip alarm switch MBV26CP102 (for example, 1.5bar),
Lube oil filter fouled will be set off. In this case the clean
including rights created by patent grant or registration of
The reproduction, transmission or use of this document
or its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
MBV26CP501 permits checking of the bearing oil supply method of measuring bearing temperature has the
pressure locally. advantage of rapidly detecting excessive thermal stresses
on the bearings.
Siemens AG 3.1-8000-0592/2
Power Generation 0905E-X
Gas Turbine Lubricant Supply System
Description of Auxiliary Systems Lube and Jacking Oil System
The thermocouples MBV90CT101, 102, 104 and 105 MBV21BP004 and MBV30BP006. Pressure relief valves
are installed in the return lines for additional lube oil MBV30AA191 and MBV30AA192 protect the system from
temperature monitoring . A prewarning signal temperature being damaged by too high pressure of the jacking oil
HIGH is triggered if the max. admissible temperature is pumps caused by a system failure (e.g.,pressure control
exceeded. The lube oil temperature is displayed by the valve fault or clogged filter).
thermometers MBV90CT501, 502, 504 and 505. The suction pressure of the jacking oil pumps can be
measured using pressure transducers MBV30CP103 and
Lube Oil Heating during Standstills MBV30CP104.
Any dirt in the oil is removed by jacking oil filter
The lube oil temperature is measured in the tank by
MBV30AT001 or MBV30AT002. Pressure switch
dual-element resistance thermometer MBV10CT101 and
MBV30CP001 monitors the differential pressure across
displayed locally by the instrument MBV10CT501. The lube
these filters. If the pressure drop exceeds the setpoint of
oil is heated by switching on the main and auxiliary oil
the differential pressure switch, the pretrip alarm jacking
pumps when the temperature in the oil tank drops below
oil filter fouled is annunciated. In this case, the flow must
temperature T.SCHMOEL.02 (e.g., 15 C). These pumps
be switched over to the clean filter by actuating valve
are shut down when the temperature exceeds
MBV30AA251 and the fouled filter element has to be
T.SCHMOEL.03 (e.g., 20C). Circulation transmits the
replaced. Pressure transducers MBV30CP101 and
thermal losses of the pumps to the oil, thus not only
MBV30CP102 monitor the function of the two jacking oil
heating the oil in the tank, but also the lines and bearing
pumps and the pressure is displayed locally on pressure
housings. This means of heating lube oil is advantageous
gauge MBV30CP502. The redundant jacking oil pump
including rights created by patent grant or registration of
The reproduction, transmission or use of this document
or its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
as it:
immediately starts if the jacking oil pressure declines below
does not require any additional heating and monitoring the settings of pressure transducers MBV30CP101 or
equipment, MBV30CP102 (e.g., 100bar). Pressure control valve
offers a certain redundancy in that two oil pumps are in MBV31AA151 is located in the jacking oil control block.
a utility model or design, are reserved
operation, This valve reduces jacking oil pressure to the level required
ensures uniform warming of the lube oil and the items for operation. The jacking oil control block also has
through which it flows. connections for distributing jacking oil to the gas turbine,
gas turbine compressor and generator bearings. Adjustable
flow restrictors MBV31AA281-282 can be used to regulate
A pretrip alarm is issued if the oil temperature drops below the flow of oil fed to the respective bearings. Swing check
T.SCHMOEL.01 (e.g. 10C). If the oil temperature drops valves MBV31AA201-202 prevent lube oil from draining out
below the setting T.SCHMOEL.01 at both sensors of of the jacking oil pockets in the bearing shells when the
jacking oil pump is shut down, thereby preventing a decline
temperature transducer MBV10CT101, startup of the gas
in the hydrodynamic journal pressure. The adjusted jacking
turbine is prevented.
oil pressures of the bearings are indicated locally on
pressure gauges MBV31CP501 -502.
Jacking Oil System The jacking oil pump is automatically started up when
turbine speed declines below S.TURB.12 (for example,
At low turbine speeds, lube oil alone does not form an 500rpm) and shut down when speed exceeds S.TURB.12.
adequate hydrodynamic lubricating film. To prevent mixed
lubrication, jacking oil at high pressure (approx.140bar) is
pumped into pockets of the bearing shells below the shaft Shaft Turning Gear
journals. The shaft is lifted and floats hydrostatically on the
After the turbine-generator has been shut down, the
oil film. Jacking oil pump MBV30AP001 and redundant
line of shafting (gas turbine and generator) is turned at low
pump MBV30AP002 are vane pumps driven by three-
speed (for example, 120rpm) in turning gear mode. The
phase electric motors. Swing check valves MBV30AA201
flow of air through the machine induced by blading
and MBV30AA202 are located below the oil level to avoid
uniformly cools the gas turbine. Distortion of the rotor and
that air is being sucked through the suction nozzles. In
casing (arching: caused by passive cooling without
addition to this, the suction pipes are filled from the lube oil
sufficient air flow through the machine, involves more rapid
supply line via shut-off valves MBV21AA404 and
cooling of the lower casing and shaft regions) are
Class: RESTRICTED
Siemens AG 3.1-8000-0592/3
Power Generation 0905E-X
Gas Turbine Lubricant Supply System
Description of Auxiliary Systems Lube and Jacking Oil System
The gas turbine remains in turning gear operation until to engage and disengage should be performed quickly and
a defined time has elapsed (K.TURN.01 + K.TURN.04, for as smoothly as possible (meshing time of 1s, for example).
example 24 hours) allowing the machine to sufficiently cool If the solenoid valves of the swivel arm actuator are
down. This operation is also known as cool down turning. deenergized or if the jacking oil pressure declines, the
The turning gear is shut down after conclusion of cool- swivel arm is returned to its disengaged position by spring
down turning. When the shaft has come to a standstill force.
(speed lower than S.TURB.02 (for example 6rpm) for The hydraulic motor is supplied with jacking oil via
longer than K.SCHMOEL.08 (for example 6sec), the solenoid-type shutoff valve MBV35AA003 and flow control
jacking oil pump and the lube oil pump are shut down. valve MBV35AA101. The speed of the hydraulic motor is
The shaft is turned briefly at intervals of K.TURN.02 (for varied between standstill (speed 0rps) and turning speed
example every 6 hours) during extended outages to by adjusting the lift of flow control valve MBV35AA101.
confirm that it still turns freely. Turning speed is not Two mechanical stops are used to set turning speed.
reached at such times. This operation is known as interval During the transition from power operation to cool down
turning. turning, the pinion gear on the swivel arm is generally
The gas turbine is started either from a standstill or with engaged when turning speed is reached during coast
the shaft coasting down. If running, the turning gear is shut down, connecting the shaft of the hydraulic motor with that
down prior to starting the gas turbine. of the turbine-generator via the gear mechanism.
Turning speed is selected so as to ensure sufficient air Solenoid valves MBV35AA101-Y01 and MBV35AA101-
throughput for proper cooling of the casing and to prevent Y02 are used to control the speed of the hydraulic motor
blade clattering. (greater oil flow = higher speed and vice versa).
including rights created by patent grant or registration of
The reproduction, transmission or use of this document
or its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
For mechanical design reasons the turbine blades are The turning gear can be engaged while the turbine-
seated loosely in the rotor disk slots at room temperature. generator shaft is at rest or coasting down. When the
At very low shaft speeds the blade roots shift slightly in turbine generator shaft is at rest, the swivel arm is pivoted
their slots and clatter audibly. Above a certain speed inward to engage the pinion gear on its free end with the
a utility model or design, are reserved
centrifugal force holds the blade roots firmly in place. gear ring on the turbine generator shaft; this is performed
with the hydraulic motor shut down (solenoid-type shutoff
The shaft turning gear is located in the compressor
valve MBV35AA003 is closed). The solenoid-type shutoff
bearing region. It comprises a hydraulic motor
valve is then opened and the actuator of the flow control
MBK22AE001 connected to a drive pinion. The drive pinion
valve is gradually set to the lift required for turning speed
is permanently meshed with a second pinion mounted on
using a time function. This begins turning gear operation.
the free end of the swivel arm. Hydraulic cylinder actuator
MBK21AU001 pivots the swivel arm inward to mesh the If turbine-generator speed drops below engaging or
pinion at its free end with a gear ring mounted on the turning speed during coast down without engaging having
intermediate shaft connecting the gas turbine and occurred (e.g., failed start), solenoid valves MBV35AA101-
generator. Spring force returns the swivel arm to its Y01 and MBV35AA101-Y02 can be used to match the
disengaged position. The speed of the hydraulic motor is engaging speed of the hydraulic motor to that of the shaft.
measured by speed sensors MBK22CS101 and When the GT shaft speed equals (is synchronous with) that
MBK22CS102. The speed of the hydraulic motor is of the hydraulic motor, the solenoid valves of the swivel
matched to that of the GT shaft after allowing for the gear arm actuator are energized and the swivel arm is moved
ratio of the drive pinion and gear ring. inward to its engaged position. With the swivel arm in its
engaged position the flow control valve actuator is then
Jacking oil is supplied to the hydraulic motor and the
gradually set to the lift required for turning speed. This
swivel arm actuator. During operation of the gas turbine
begins turning gear operation.
with the jacking oil pump shut down, the hydraulic motor is
supplied with lube oil via swing check valve MBV35AA201 Turning gear operation is terminated by closing the
to prevent damage that is typical of equipment standstills. solenoid valves of the swivel arm actuator and the
solenoid-type shutoff valve. This causes the swivel arm to
When solenoid valves MBV35AA001 and
return to its disengaged position and the hydraulic motor
MBV35AA002 of the swivel arm actuator are energized,
coasts to a stop.
pressurized oil is supplied to hydraulic cylinder
MBK21AU001 and the swivel arm pivots inward, meshing
the pinion at its free end with the gear ring. Swivel arm
Class: RESTRICTED
Siemens AG 3.1-8000-0592/4
Power Generation 0905E-X
Gas Turbine Lubricant Supply System
Description of Auxiliary Systems P+I Diagram Lube and Jacking Oil System
Siemens AG 3.1-8010-0592
Power Generation MBV 0106E-X
Gas Turbine Hydraulic Control Equipment
Description of Auxiliary Systems Hydraulic Oil System
Refer also to: (RTD), MBX01CT101, provide local and remote indication
of the reservoir fluid temperature.
List of Control Settings (SREL) 3.1-0210 The reservoir is equipped with a breather
List of Measuring Instruments 3.1-0220 MBX01AT001. The built-in filter minimizes the intrusion of
List of Electrical Loads 3.1-0230 dirt into the hydraulic oil reservoir.
Equipment List 3.1-0240
P+I Diagram, Hydraulic System 3.1-9010
Specification for Hydraulic Oils 3.1-0251 Hydraulic Supply Pumps
Two AC motor-driven variable displacement pumps,
Settings, limits and measuring ranges of the items of MBX02AP001 /MBX02AP002, are mounted on top of the
equipment listed here are given in the List of Measuring hydraulic fluid reservoir. Each pump is capable of supplying
Instruments, the Equipment List and the List of Control the total requirements of the system. One pump is normally
Settings (SREL). This description only gives guideline operating with the other acting as a standby. The operating
values. pump can be pre-selected. The adjustable relief valves,
MBX02AA191/MBX02AA193, control the pumps so that the
General System Description displacement of the operating pump is automatically varied
to meet the system demand. These valves ensure a
The hydraulic supply system provides pressurized constant discharge pressure of 16 MPa (160 bar, 2320
hydraulic fluid for operation of the control actuators in the PSI). Loss of operating pump discharge pressure,
content is not permitted without express written authority.
auxiliary equipment. System components are mounted on detected by the pressure transmitter MBX03CP101, will
the hydraulic power unit (HPU). automatically start the standby pump. The discharge lines
Hydraulic fluid is contained in a reservoir, which is of the two pumps merge downstream of the supply line
equipped with instrumentation for status and protective filters. A check valve, MBX03AA201/MBX03AA202, is
functions. Fluid is pumped from the reservoir by one of two located at the discharge of each pump to prevent backflow
redundant pumps. through the standby pump.
If the primary pump should fail, the standby pump will Pressure relief valves, MBX02AA192/MBX02AA194,
automatically start to ensure a continuous supply of adjusted at 18 MPa (180 bar, 2610 PSI), are installed
or design, are reserved.
Siemens AG 3.1-9000-0592/1
Power Generation MBX 0905E-X
Gas Turbine Hydraulic Control Equipment
Description of Auxiliary Systems Hydraulic Oil System
Filter set differential pressure is monitored by failure of the operating pump and an initiated pump
MBX06CP002. An alarm indication necessitates switching changeover from operating pump to standby pump.
to the standby filter and replacing the dirty filter element.
Oil, which enters the reservoir, passes that filter (re- Pressure Monitoring
circulating oil, returning oil and oil which is filled in through
valve MBX06AA252). This reliably ensures that no debris Pressure transmitter, MBX03CP101, monitors hydraulic
enters the system. power unit discharge pressure directed to the system.
The conditioning loop may be isolated by closing valve Dependent of the signals of the pressure transmitter:
MBX06AA251. Oil then flows directly back into the tank The standby pump is switched on during the start-up of
through the check valves, MBX06AA191/MBX06AA192, the GT, in addition to the operating pump
which function as pressure relief valves and limit the gear The standby pump is additionally switched on if the
pump discharge pressures. pressure drops below the lower value of pressure
A double resistance temperature device (RTD), threshold P.Hyd.02, e. g. 14,5 MPa (145 bar, 2103 PSI)
MBX06CT101 and thermometer MBX06CT501, provides During operation the standby pump can be switched off
remote and local indication of the temperature upstream manually after reaching the upper value of pressure
the filter set. threshold P.Hyd.02, e. g. 15 MPa (150 bar, 2175 PSI)
Pressure transducer MBX06CP102 indicates the High pressure is indicated, if pressure exceeds
pressure upstream the filter set. threshold P.Hyd.05, e.g. 17 MPa (170 bar, 2465 PSI).
content is not permitted without express written authority.
Siemens AG 3.1-9000-0592/2
Power Generation MBX 0905E-X
Gas Turbine Hydraulic Control Equipment
Description of Auxiliary Systems Hydraulic Oil System
Siemens AG 3.1-9000-0592/3
Power Generation MBX 0905E-X
Gas Turbine Hydraulic Control Equipment
Description of Auxiliary Systems P+I Diagram Hydraulic Oil System
Siemens AG 3.1-9010-0592
Power Generation MBX 0106E-X
Gas Turbine Hydraulic Control Equipment
Description of Auxiliary Systems Hydraulic Oil for Fuel Oil
Refer also to: principle, the control valves are located downstream of the
emergency stop valves.
List of Control Settings (SREL) 3.1-0210 The control system properi.e. the speed controller,
List of Measuring Instruments 3.1-0220 load controller, temperature controller, the startup and
List of Electrical Loads 3.1-0230 shutdown controller, together with the hydraulic oil supply
Equipment List 3.1-0240 station which supplies the valve actuatorsis described
P+I Diagram, Fuel Oil 3.1-4010 elsewhere.
Hydraulic Oil System 3.1-9000
P+I Diagram, Hydraulic System 3.1-9010
P+I Diagram, Hydraulic Oil for Fuel Oil System 3.1-9110 FO H-VB-SSV
PO FL ESV
MBN23AA051
MBN23AA051
H-VB-SV
FO PO FL CV/ESV Premix burners
MBN23AA151
MBN23AA151
Overview
FO return line FO DO RL CV
H-DBRL-SV FO DO RL ESV
H-DBRL-SSV
This description covers the actuators of the safety MBN53AA151 MBN52AA051
MBN53AA151 MBN52AA051
lrcklaufleitung
content is not permitted without express written authority.
actuators as appropriate, to provide the required fuel flow The KKS identifiers of the control and emergency stop
for the various operating modes of the gas turbine. valves and the respective function levels of the associated
actuator, measuring and control devices are listed in Table
The configurations of the emergency stop and control
1.
valves are illustrated in Fig. 1, valve designations are as
follows:
Function
FO PO FL CV/ESV: KKS
level
Fuel oil premix feed line control valve with emergency Valve Emergency stop
Actuator
stop function valve
devices
FO DO FL CV/ESV:
FO PO FL CV/ESV MBN23AA151 MBX87
Fuel oil diffusion feed line control valve with emergency
stop function FO DO FL CV/ESV MBN14AA151 MBX88
Siemens AG 3.1-9100-0592/1
Power Generation 0905E-X
Gas Turbine Hydraulic Control Equipment
Description of Auxiliary Systems Hydraulic Oil for Fuel Oil
limit switches mounted on the actuator piston rods servo valve is comprised of an initial pilot stage with a
(MBN14/23AA051-S11, -S12, -S21, -S22). permanent magnet control motor (torque motor), a
The actuators of the two feed line control valves are of hydraulic preamplifier (employing a nozzle impingement
an identical design. The same applies to the actuators of plate system) and a second stage comprised a spool-type
the two emergency stop valves in the feed lines. control valve with four metering edges. The second stage
also functions as a hydraulic power amplifier.
Control devices are implemented in the actuator
housings in line with the respective task requirements and The valve actuator, together with the control device, is
are explained in the following text. an integral component of the control circuit. The position
or design, are reserved.
Siemens AG 3.1-9100-0592/2
Power Generation 0905E-X
Gas Turbine Hydraulic Control Equipment
Description of Auxiliary Systems Hydraulic Oil for Fuel Oil
B01/B02/B03). These sensors output an analog current A positive current at the controller output opens the fuel
signal that is taken as the actual position and fed back to oil control valve and a negative current closes it. The
the position controller. greater the current, the faster the fuel oil control valve
The FO DO FL CV/ESV and the FO PO FL CV/ESV are opens or closes.
components of the dual element shutoff device in the The hydraulic settings of the servo valve are such that
supply line to the FO diffusion and FO premix burners, in the event of a loss of electric power supply (e.g. broken
respectively. In addition to controlling the amount of oil wire) the fuel oil return line control valve always assumes
supplied, they are also used to rapidly and reliably shut off its OPEN position.
the fuel mass flow to the FO burners when necessary. To increase control valve lift, the flow of hydraulic fluid
Closure of the control valve in the event of trip is triggered is directed across the metering surface of the second stage
by deenergizing solenoid pilot valve MBX87/88AA002 into the lower hydraulic cylinder plenum. Upward piston
(deenergize-to-trip principle). Deenergization of the travel compresses the closing spring and displaces the
solenoid pilot valve depressurizes the lower plenum, hydraulic fluid from the upper plenum into the tank. The
allowing the spring to rapidly close the emergency stop closing force for the actuator is generated by the spring, i.e.
valve. Control oil acting on the actuator piston of the 2-way the servo valve is actuated such that hydraulic oil is
cartridge valve is depressurized and flows back to the tank. displaced by spring force from the lower to the upper
Hydraulic oil pressure generated by the spring plenum via the servo valve. Actuator piston travel is
(MBX87/88AS002) in the hydraulic cylinder opens the registered by the non-contact position sensor. This sensor
spring-loaded control piston of the 2-way cartridge valve outputs an analog current signal that is taken as the actual
content is not permitted without express written authority.
and the hydraulic oil in the lower plenum flows through the position and fed back to the position controller.
2-way cartridge valve into the depressurized space above
the piston (upper plenum). The spring force of the
preloaded closing springs acting on the control piston is so
Control Devices of the Feed Line
low that only a slight pressure differential between Emergency Stop Valves
connections A and B is required to hold the 2-way cartridge The control devices of the feed line emergency stop
valve closed. Consequently the 2-way cartridge valve is valve actuators (MBX75/77AS001) are each essentially
capable of switching large oil flows at low pressure drop, comprised of one solenoid opening valve
or design, are reserved.
thus ensuring that the FO control valve actuator achieves (MBX75/77AA031), one 2-way cartridge valve
short closure times. The spring reliably closes the control (MBX75/77AA051), one solenoid pilot valve
valve. (MBX75/77AA001), one pressure filter (MBX75/77AT001)
as well as the measuring points (MBX75CP401 - ...404 or
Control Devices of the Return Line MBX77CP401 - ...404).
Control Valve To open the emergency stop valve, the solenoid pilot
valve (MBX75/77AA001) and the solenoid opening valve
The actuator for the FO DO RL CV (MBN53AA151) in (MBX75/77AA031) are energized, the latter, with a slight
the return line of the fuel oil burner system includes the delay.
control device (MBX86AS001). The latter, essentially
Energizing the solenoid pilot valve (MBX75/77AA001)
comprised of a servo valve (MBX86AA101), a pressure
pressurizes the upper plenum of the spring-loaded piston in
filter (MBX86AT001) and two measuring points
the cartridge valve (MBX75/77AA052), thus closing the
(MBX86CP401/402/404).
cartridge valve and preventing the hydraulic fluid from
Servo valve MBX86AA001 controls actuator piston draining from the lower plenum of the actuator through the
travel. It comprises a pilot stage with a torque motor and cartridge valve and into the upper actuator plenum and/or
hydraulic preamplifier and a second stage with a pilot valve to the return line to the tank.
that has four metering edges. The second stage also
Subsequent energizing of the solenoid opening valve
functions as a hydraulic power amplifier.
(MBX75/77AA031) supplies hydraulic fluid to the lower
The valve actuator, together with the control device, is plenum. Upward piston travel compresses the closing
an integral component of the control circuit. The position spring and displaces the hydraulic fluid from the upper
controller sends a positioning signal to the servo valve in plenum into the return line to the tank.
the form of a load-independent current, which changes the
Closure of the emergency stop valve
flow of hydraulic oil from the oil supply station at a level
Class: RESTRICTED
Siemens AG 3.1-9100-0592/3
Power Generation 0905E-X
Gas Turbine Hydraulic Control Equipment
Description of Auxiliary Systems Hydraulic Oil for Fuel Oil
solenoid pilot valve depressurizes the lower plenum, The OPEN and CLOSED positions of the emergency
causing the spring to rapidly close the emergency stop stop valve MBP13AA051 are each monitored by two
valve. Control oil acting on the actuator plenums of the 2- inductive position limit switches located in the actuator unit
way cartridge valves is depressurized and flows back to the (MBN14/23AA051-S11, -S12, -S21, -S22).
tank. Hydraulic oil pressure generated by the spring in the Closing of the emergency stop valve is achieved by
hydraulic cylinder (MBX75/77AS002) opens the spring- deenergizing solenoid valve MBX79AA002 (deenergize to
loaded control piston of the 2-way cartridge valve and the close principle). The solenoid valve is equipped with a
hydraulic oil in the lower plenum flows through the 2-way closing spring which is compressed when the two solenoid
cartridge valve into the depressurized space above the coils are energized.
piston (upper plenum). The spring force of the preloaded
Consequently the fail-safe emergency stop valve is
closing springs acting on the control piston is so low that
closed if voltage supply to the solenoid is interrupted.
only a slight pressure differential between connections A
When solenoid valve MBX79AA002 is energized, hydraulic
and B is required to hold the 2-way cartridge valve closed.
fluid flows into the lower plenum and displaces the piston
Consequently, the 2-way cartridge valve is capable of
upward. This displaces hydraulic fluid in the upper plenum
switching large oil flows at low pressure drop, thus
into the return line. This interaction opens the emergency
ensuring that the emergency stop valve actuator achieves
stop valve. The closing spring of the emergency stop valve
short closure times. The spring reliably closes the
is now compressed. Deenergization of the solenoid valve
emergency stop valve. When the trip signal is received, the
depressurizes the lower plenum, causing the closing spring
solenoid pilot valve (MBX75/77AA001) and the solenoid
to rapidly close the emergency stop valve. In the event of a
opening valve (MBX75/77AA031) are simultaneously
content is not permitted without express written authority.
trip, hydraulic oil present in the lower plenum flows into the
deenergized. This interrupts the connection to the pressure
upper plenum and/or the return line to the tank.
line. Fail-safe, rapid closure of the valve is, however,
ensured by deenergization of the solenoid pilot valve alone.
Solenoid valves
Control Devices of the Return Line All trip initiating solenoid valves are equipped with two
Emergency Stop Valve coils. The design of the solenoid valves is fail safe.
Consequently emergency stop valves and the control
The control device MBX79AS001 associated with the
or design, are reserved.
Siemens AG 3.1-9100-0592/4
Power Generation 0905E-X
Gas Turbine Hydraulic Control Equipment
Description of Auxiliary Systems P+I Diagram Hydraulic Oil for Fuel Oil
Siemens AG 3.1-9110-0592
Power Generation MBX 0106E-X
Gas Turbine Hydraulic Control Equipment
Description of Auxiliary Systems Hydraulic Oil for Natural Gas Valves
The control system properi.e., speed control, load Three inductive position sensors (MBP21/22/23AA151-
control, temperature limit control, startup and shutdown B01/-B02/-B03) are mounted on the piston rod of each
control valve actuator.
Class: RESTRICTED
Siemens AG 3.1-9200-0592/1
Power Generation MBX 0905E-X
Gas Turbine Hydraulic Control Equipment
Description of Auxiliary Systems Hydraulic Oil for Natural Gas Valves
position limit switches (MBP21AA151-S21/-S22/-S23) for hydraulic preamplifier and the second a hydraulic power
the CLOSED position). amplifier.
The OPEN and CLOSED positions of emergency stop The valve actuator, together with the control device, is
valve MBP13AA051 are each monitored by two inductive an integral component of the control loop. The position
position limit switches located in the actuator unit controller sends a positioning signal to the servo valve in
(MBP13AA051-S11, -S12, -S21, and -S22). the form of a load-independent current, which changes the
Control devices are implemented in the actuator flow of hydraulic oil from the oil supply station at a level
housings in line with the respective task requirements and proportional to the signal current, but with a high
are explained in the following. amplification.
A positive current at the controller output opens the
control valve and a negative current closes it. The greater
Control Devices, General the current, the more rapidly the control valve opens or
(MBX70/80/81/82AS001) closes.
Each of the control devices is connected to the The hydraulic settings of the servo valve are such that
hydraulic oil supply station by one supply and one return in the event of loss of current signal (e.g., broken wire) the
line. control valve always assumes its CLOSED position.
Each control device is protected by a dedicated To open the valve, hydraulic oil is supplied to the lower
pressure filter (MBX70/80/81/82AT002). An optical fouling plenum via the metering edges of the second stage.
display (MBX70/80/81/82CP502) is provided to monitor Upward piston travel compresses the closing spring and
rights created by patent grant or registration of a utility model
Offenders will be liable for damages. All rights, including
content is not permitted without express written authority.
The reproduction, transmission or use of this document or its
fouling of each filter. If fouling of a given filter causes displaces the hydraulic fluid from the upper plenum into the
pressure to exceed a certain level, this is indicated by a return line to the tank.
change in color. To close the valve, oil is routed via the metering edges
The actuator control devices provided for the natural of the second stage from the lower plenum to the upper
gas diffusion and natural gas premix burner control valves plenum and/or return line to the tank. The valve disk is
(NG DB CV and NG PB CV) are identical and are actuated in the close direction by spring force, displacing
described collectively. hydraulic oil from the lower plenum through the servo valve
and into the upper plenum and/or the return line to the
or design, are reserved.
and the hydraulic oil in the lower plenum then flows through
by the two-stage servo valve MBX80AA101/MBX81AA101.
the 2-way cartridge valve into the depressurized space
This servo valve has two stages, the first comprising a
above the piston (upper plenum). The spring force of the
preloaded closing springs that acts on the control piston is
Siemens AG 3.1-9200-0592/2
Power Generation MBX 0905E-X
Gas Turbine Hydraulic Control Equipment
Description of Auxiliary Systems Hydraulic Oil for Natural Gas Valves
so low that only a slight pressure differential between controller as the actual position. Of these output signals,
connections A and B is required to hold the 2-way cartridge the maximum value is used for control actions.
valve closed. Consequently the 2-way cartridge valve is Closure of the control valve on trip is triggered by
capable of switching large oil flows at low pressure drop, deenergizing solenoid-type pilot valve MBX82AA002
thus ensuring that the control valve actuator achieves short (deenergize to close principle). On deenergization of the
closure times. The Belleville spring stack reliably closes the solenoid-type pilot valve, the lower plenum is
control valve. depressurized, causing the closing spring to rapidly close
the emergency stop valve. In the event of trip hydraulic
Control Device of the Pilot Gas Control fluid in the lower plenum flows through the solenoid-type
pilot valve into the depressurized space above the piston
Valve (MBX82AS001)
(upper plenum) and/or into the return line to the tank.
The control device MBX82AS001 associated with the
actuator of the pilot gas control valve MBP23AA151
essentially comprises servo valve MBX82AA101, solenoid-
Control Devices of the Emergency Stop
type pilot valve MBX82AA002, pressure filter MBX82- Valve (MBX70AS001)
AT002, and measuring points MBX82CP401, MBX82402, The control devices of the emergency stop valve
MBX82404. actuator essentially comprise solenoid-type opening valve
During normal operation solenoid-type pilot valve MBX70AA031, 2-way cartridge valve MBX70AA051,
MBX82AA002 is energized. This prevents the oil in the solenoid-type pilot valve MBX70AA001, pressure filter
rights created by patent grant or registration of a utility model
Offenders will be liable for damages. All rights, including
content is not permitted without express written authority.
The reproduction, transmission or use of this document or its
lower plenum from draining through the solenoid-type pilot MBX70AT002, as well as measuring points MBX70CP401,
valve into the upper plenum and/or into the return line to MBX70402, MBX70403, MBX70404.
the tank. To open the emergency stop valve, solenoid-type pilot
Servo valve MBX82AA101 controls actuator piston valve MBX70AA001 and solenoid-type opening valve
travel. It comprises a pilot stage with a torque motor and MBX70AA031 are energized, the latter with a slight delay.
hydraulic preamplifier and a second stage with four By energizing solenoid-type pilot valve, the upper
metering edges. plenum of the spring-loaded piston in the cartridge valve is
The valve actuator, together with the control device, is pressurized, thus closing the cartridge valve and
or design, are reserved.
an integral component of the control loop. The position preventing the flow of hydraulic fluid from the drain in the
controller sends a positioning signal to the servo valve in lower plenum of the actuator through the cartridge valve
the form of a load-independent current, which changes the and into the upper plenum and/or into the return line to the
flow of hydraulic oil from the oil supply station at a level tank.
proportional to the signal current, but with a high Subsequent energization of solenoid-type opening
amplification. valve supplies hydraulic fluid to the lower plenum. Upward
A positive current at the controller output opens the piston travel compresses the closing spring and displaces
control valve and a negative current closes it. The greater the hydraulic fluid from the upper plenum into the return
the current, the more rapidly the control valve opens or line to the tank.
closes. Closure of the emergency stop valve in the event of trip
The hydraulic settings of the servo valve are such that is triggered by deenergizing solenoid-type pilot valve
in the event of loss of current signal (e.g., broken wire) the (deenergize to close principle).
control valve always assumes its OPEN position. Deenergizing the solenoid-type pilot valve
To increase control valve lift, hydraulic fluid is directed depressurizes the lower plenum, allowing the Belleville
across the metering surface of the second stage into the spring stack to rapidly close the emergency stop valve.
lower hydraulic cylinder plenum. Upward piston travel Control oil acting on the actuator piston of the 2-way
compresses the closing spring and displaces the hydraulic cartridge valve flows back to the tank in the depressurized
fluid from the upper plenum back into the tank. condition. Hydraulic oil pressure generated by the Belleville
The closing force of the actuator is generated by the spring stack MBX70AS002 in the hydraulic cylinder opens
closing spring, i.e., the servo valve is actuated such that the spring-loaded control piston of the 2-way cartridge
hydraulic oil is displaced by spring force from the lower to valve and the hydraulic oil in the lower plenums flows
the upper plenum via the servo valve. Actuator piston travel through the 2-way cartridge valve into the depressurized
Class: RESTRICTED
is registered by three non-contact displacement sensors: space above the piston (upper plenum).
MBP23AA151-B01/-B02/-B03. These sensors output an The spring force of the preloaded closing springs that
analog current signal that is fed back to the position acts on the control piston is so low that only a slight
Siemens AG 3.1-9200-0592/3
Power Generation MBX 0905E-X
Gas Turbine Hydraulic Control Equipment
Description of Auxiliary Systems Hydraulic Oil for Natural Gas Valves
pressure differential between connections A and B is When trip is triggered, the solenoid-type pilot valve and
required to hold the 2-way cartridge valve closed. the solenoid-type opening valve are simultaneously
Consequently the 2-way cartridge valve is capable of deenergized. This interrupts the connection to the pressure
switching large oil flows at low pressure drop, thus line. Fail-safe, rapid closure of the valve is ensured by
ensuring that the emergency stop valve actuator achieves deenergization of the solenoid-type pilot valve alone.
short closure times. The Belleville spring stack reliably
closes the emergency stop valve.
rights created by patent grant or registration of a utility model
Offenders will be liable for damages. All rights, including
content is not permitted without express written authority.
The reproduction, transmission or use of this document or its
Siemens AG 3.1-9200-0592/4
Power Generation MBX 0905E-X
Gas Turbine Hydraulic Control Equipment
Description of Auxiliary Systems P+I Diagram Hydraulic Oil for Natural Gas
Siemens AG 3.1-9210-0592
Power Generation MBX 0106E-X
Gas Turbine Hydraulic Control Equipment
Description of Auxiliary Systems Hydraulic System for Water Injection
Refer also to: The control system properi.e. water flow control,
together with the hydraulic oil supply station which supplies
List of Control Settings 3.1-0210 the valve actuator unitsis described elsewhere.
List of Measuring Instruments 3.1-0220 The KKS identifiers of the control and emergency stop
List of Electrical Loads 3.1-0230 valves and the respective function levels of the associated
Equipment List 3.1-0240 actuator, measuring and control devices are listed in
Water Injection 3.1-7000 Table 1.
P+I Diagram, Water Injection 3.1-7010
Hydraulic Oil System 3.1-9000
KKS Function
P+I Diagram, Hydraulic Oil 3.1-9010
Control/emer- level
P+I Diagram, Hydraulic Oil for Water Injection 3.1-9310 Valve
gency stop Actuator
valve devices
Settings, limits and measuring ranges of the devices
listed here are given in the List of Measuring Instruments, HP EMU DO ESV MBU41AA051 MBX50
Equipment List and List of Control Settings (SREL). This HP EMU PO ESV MBU46AA051 MBX51
description only gives guideline values. HP EMU DO CV/ESV MBU41AA151 MBX60
HP EMU PO CV/ESV MBU46AA151 MBX61
Overview
Table 1: KKS Designations Assigned
content is not permitted without express written authority.
compact actuator units. the valve and is integrated into the actuator unit. The piston
The valve control devices position and switch the area is identical in the two cylinder plenums and pressure
valves by controlling the hydraulic oil supplied to the valve is applied from one side only. The valve can only be
actuators as appropriate, to provide the required fuel flow opened when the actuator is supplied with hydraulic fluid
for the various operating modes of the gas turbine. under pressure. The spring in the actuator applies the force
necessary to close the valve. The piston rod is made of
The following valves are used:
stainless steel and has a hard chromium finish.
HP EMU DO ESV
Three inductive position sensors (MBU41AA151-
High-pressure emulsion diffusion operation emergency B01/B02/B03 and MBU46AA151-B01/B02/B03) with
stop valve integrated electronics and plug connections are mounted
HP EMU PO ESV on the piston rod of each actuator.
High-pressure emulsion premix operation emergency The OPEN and CLOSED positions of the emergency
stop valve stop valves are each monitored by two inductive position
HP EMU DO CV/ESV limit switches mounted on the actuator piston rods
(MBU41/46AA051-S11, -S12, -S21, -S22).
High-pressure emulsion diffusion operation control
valve with emergency stop function Control devices are implemented in the actuator
housings in line with the respective task requirements and
HP EMU PO CV/ESV
are explained in the following text.
High-pressure emulsion premix operation control valve
with emergency stop function.
Control DevicesGeneral
In each of these cases, an emergency stop valve and a Each of the control devices is connected to the
control valve are connected in series. As a matter of hydraulic supply station by one supply and one return line.
Class: RESTRICTED
Siemens AG 3.1-9300-0592/1
Power Generation MBX 0905E-X
Gas Turbine Hydraulic Control Equipment
Description of Auxiliary Systems Hydraulic System for Water Injection
identical and therefore described jointly. Likewise, the two due to a broken wire) the control valve always assumes its
control devices (MBX50AS001 and MBX51AS001) CLOSED position.
associated with the emergency stop valve actuators are To open the valve, hydraulic oil is supplied to the lower
identical and therefore described jointly. plenum via the metering edges of the second stage.
Each of these control devices is protected by a 10m Upward piston travel compresses the closing spring and
pressure filter (MBX50AT002, MBX51AT002, MBX60- displaces the hydraulic fluid from the upper plenum into the
AT002, and MBX61AT002). A visual fouling indicator return line to the tank.
(MBX50CP501, MBX51CP001, MBX60CP501, MBX61- To close the valve, a connection is opened between the
CP501) is provided to monitor fouling of each filter. A lower plenum and the upper plenum and/or tank return line
color-coded indication is displayed on the actuator filter via the metering edges of the second stage. The valve is
assembly if the differential pressure across the filter closed by spring force, forcing hydraulic oil from the lower
exceeds a predetermined set point.. plenum through the servo valve and into the upper plenum
and/or the return line to the tank. Actuator piston travel is
Control Devices of the Control Valves registered by three non-contact position sensors
MBP41AA151-B01/B02/B03 or MBP46AA151-
The respective control devices of the control valve B01/B02/B03. These sensors output an analog current
actuators are essentially comprised of the servo valves signal that is taken as the actual position and fed back to
MBX60AA101 and MBX61AA101, the cartridge-type 2-way the position controller.
pilot valves MBX60AA052 and MBX61AA052, the solenoid
The HP EMU DO CV and the HP EMU PO CV are
content is not permitted without express written authority.
The hydraulic settings of the servo valve are such that The control devices of the supply line emergency stop
in the event of a loss of electric power supply (for example valve actuators are essentially comprised of the solenoid
Siemens AG 3.1-9300-0592/2
Power Generation MBX 0905E-X
Gas Turbine Hydraulic Control Equipment
Description of Auxiliary Systems Hydraulic System for Water Injection
opening valves MBX50AA031 / MBX51AA031, the 2-way MBX50AS002 / MBX51AS002 in the hydraulic cylinder
(cartridge-type) pilot valves MBX50AA051 / MBX51AA051, opens the spring-loaded control piston of the 2-way
the solenoid pilot valves MBX50AA001 / MBX51AA001, the cartridge valve and the hydraulic oil in the lower plenums
pressure filters MBX50AT001 / MBX51AT001 as well as flows through the 2-way cartridge valve into the
the measuring points MBX50/51CP401/402/403/404. depressurized space above the piston (upper plenum). The
To open the emergency stop valve, the solenoid pilot spring force of the preloaded closing springs acting on the
valve MBX50AA001 / MBX51AA001 and the solenoid control piston is so low that only a slight pressure
opening valve MBX50AA031 / MBX51AA031 are differential between connections A and B is required to
energized, the latter with a slight delay. hold the 2-way cartridge valve closed. Consequently the 2-
way cartridge valve is capable of switching large oil flows at
By energizing the solenoid pilot valve MBX50-
low pressure drop, thus ensuring that the emergency stop
AA001 / MBX51AA001 the upper plenum of the spring-
valve actuator achieves short closure times. The spring
loaded piston in the cartridge valve (MBX50-
reliably closes the emergency stop valve. When the trip
AA052 / MBX51AA052) is pressurized, thus closing the
signal is received, the solenoid pilot valve MBX50-
cartridge valve and preventing the flow of hydraulic fluid
AA001 / MBX51AA001 and the solenoid opening valve
from the drain in the lower plenum of the actuator through
MBX50AA031 / MBX51AA031 are simultaneously de-
the cartridge valve and into the upper plenum and/or into
energized. This interrupts the connection to the pressure
the return line to the tank.
line. Fail-safe, rapid closure of the valve is, however,
Subsequent energizing of the solenoid opening valve ensured by de-energization of the solenoid pilot valve
MBX50AA031 / MBX51AA031 supplies hydraulic fluid to alone.
content is not permitted without express written authority.
causing the spring to rapidly close the emergency stop to only one of the coils is interrupted, the second coil is
valve. Control oil acting on the actuator plenums of the 2- able to hold the solenoid valve in position.
way cartridge valves is depressurized and flows back to the
tank. Hydraulic oil pressure generated by the spring
Class: RESTRICTED
Siemens AG 3.1-9300-0592/3
Power Generation MBX 0905E-X
Gas Turbine Hydraulic Control Equipment
Description of Auxiliary Systems P+I Diagram Hydraulic Oil for Water Injection
Siemens AG 3.1-9310-0592
Power Generation MBX 0106E-X
Gas Turbine Pneumatic Control Equipment
Description of Auxiliary Systems Pneumatic System
the supply of compressed air to the gas turbine is therefore Any dirt particles or oil droplets still present in the
independent of the power plant compressed air network compressed air are removed by filter MBX22AT003. An
and is generated by a pneumatic station. Valves in other optical differential pressure indicator equipped with
systems are supplied in addition to the blowoff valves. differential pressure switch MBX22CP001 is provided at
the filter. A group fault alarm is annunciated if the
differential pressure setting of this switch is violated (cf.
Configuration and Function of subsection Monitoring). Then the filter element must be
Compressor Train replaced. Condensation is removed via drain
MBX22AT013.
The compressed air station is equipped with two
Shutoff valve MBX22AA251 can be used to isolate the
design, are reserved.
Electrically-driven compressor MBX21AN001 Compressed air tank MBX24BB001 is used to store the
compresses air. Filter MBX21AT001 prefilters the air as it compressed air after it has been dried and cleaned.
is drawn into the system. Pressure control valve MBX24AA151 maintains system
Relief valve MBX21AA191 protects the compressor pressure even during extended outages and in the event of
against excessive pressure. minor leaks. It only opens if pressure in the tank exceeds
the startup pressure of the compressors. Orifice
Solenoid-type pressure relief valve MBX21AA501 is
MBX24BP001 ensures that only a very small flow or air can
installed downstream of the compressors to prevent the
be returned even in the event the pressure control valve
reciprocating compressors from having to start up against
malfunctions.
pressure (startup assistance). This solenoid valve is open
when the associated compressor is at standstill and is Tank pressure can be read off gauge MBX24CP501.
closed after the compressor is switched on. System pressure is limited by safety valve
The escaping compressed air and any condensation MBX24AA191.
that forms are fed into condensation collecting tank Shutoff valve MBX24AA401 can be used as necessary
MBX23BB001. The condensation collecting tank is to check whether condensation has formed in the tank.
equipped with silencer MBX23BS001 to reduce noise when
Class: RESTRICTED
Siemens AG 3.1-9800-0592/1
Power Generation 0905E-X
Gas Turbine Pneumatic Control Equipment
Description of Auxiliary Systems Pneumatic System
switched on. This prevents the moisture contained in the LOW2, Compressor 1 ON, Compressor 2 ON, Fault in
air from forming condensation inside the terminal box. train 1, and Fault in train 2 are generated by the
Hygrometer MBX29CM002 is used to measure the pneumatic station, fed into the gas turbine I&C system,
relative humidity in the terminal box of the second train. If processed, and then displayed on the operation and
the permissible limit is exceeded, heater MBX29AH002 is monitoring system.
switched on. This prevents the moisture contained in the The tank pressure is monitored by pressure switches
air from forming condensation inside the terminal box. MBX24CP001, MBX24CP002, and MBX24CP008. If tank
pressure drops below the setting of pressure switch
MBX24CP001, the pretrip alarm "PRESSURE LOW" is
Open-loop Control annunciated. If pressure in the tank continues to decline,
The open-loop control system for the pneumatic station pressure switches MBX24CP002 and MBX24CP008
constitutes a black box for the gas turbine I&C system. operate, gas turbine trip is triggered (2-of-3 logic gating),
Once the pneumatic station has been started up by and the alarm message Pressure TOO LOW is
manually actuating the main power switch, no further annunciated.
switching actions on the part of the gas turbine I&C system The signals Compressor 1 ON and Compressor 2
are required for control of the pneumatic station. ON are displayed on the operation and monitoring system.
The open-loop control equipment and power supply for If the compressors remain in operation for extended
the electrical components are located on a separate sub- periods, it can be assumed that the system is no longer
distribution board for each compressor train leak-tight. The pneumatic system, including all piping, must
The reproduction, transmission or use of this document or its
content is not permitted without express written authority.
Offenders will be liable for damages. All rights, including rights
created by patent grant or registration of a utility model or
The operating status signals Pressure LOW1, solenoid valve NOT CLOSED, response of differential
Pressure LOW2, Pressure TOO LOW1, Pressure TOO pressure switch.
Class: RESTRICTED
Siemens AG 3.1-9800-0592/2
Power Generation 0905E-X
Gas Turbine Pneumatic Control Equipment
Description of Auxiliary Systems P+I Diagram Pneumatic System
Siemens AG 3.1-9810-0592
Power Generation MBX 0106E-X
Gas Turbine Pneumatic Control Equipment
Description of Auxiliary Systems Pneumatic Valves and Piping for Fuel Oil
Settings, limits and measuring ranges of the devices To ensure fail-safe opening and closing of the above
listed here are given in the List of Measuring Instruments, valves, they are equipped with pneumatic actuators.
Equipment List and List of Control Settings (SREL). This The supply of compressed air for these actuators is
description only gives guideline values. enabled or shut off by electrically actuated, 3-way solenoid
valves. To open a ball valve, the respective 3-way solenoid
valve is deenergized, allowing compressed air to escape
Function
via the associated silencer.
Ball valves MBN12AA053, MBN12AA054, The ball valves are closed by energizing the associated
The reproduction, transmission or use of this document
MBN34AA051 and MBN44AA051 are pneumatically- 3-way solenoid valve, thus pneumatically operating the
actuated to ensure reliable closing and opening even in the actuator.
event of loss of electric power. All valves are opened by
A shut off valve is provided in the pneumatic feed line
spring force and closed pneumatically.
on the fuel oil package upstream of solenoid valves
a utility model or design, are reserved
The correlation of the devices is listed in the overview MBX98AA007 and MBX98AA008.
table below.
The control air for actuation of these valves is supplied
from the pneumatic station at connection FD. A detailed
description of the pneumatic station is given in Section 3.1-
9800.
Class: RESTRICTED
Siemens AG 3.1-9820-0592
Power Generation 0905E-X
Gas Turbine Pneumatic Control Equipment
Description of Auxiliary Systems P+I Diagram Pneumatic Valves and Piping for Fuel Oil
Siemens AG 3.1-9830-0592
Power Generation MBX 0106E-X
Gas Turbine Pneumatic Control Equipment
Description of Auxiliary Systems P+I Diagram Pneumatic Valves and Piping
for Blowoff System
Siemens AG 3.1-9910-0592
Power Generation MBX 0106E-X
The reproduction, transmission or use of this document or its
content is not permitted without express written authority.
Offenders will be liable for damages. All rights, including rights
created by patent grant or registration of a utility model or
Class: RESTRICTED design, are reserved.
Operation
Gas Turbine
Operation
Power Generation
Siemens AG
Operating Manual for the overall plant.
Detailed information on this topic is given in the
Notes on the Manual Section Operation
3.3-0004-0001
1104E-Y
Gas Turbine Gas Turbine in General
Fault Rectification Fault Rectification, General Remarks
Siemens AG 3.3-1700-9000
Power Generation MB 0499E-X
Gas Turbine Gas Turbine in General
Fault Rectification Instructions for Completing GTPRs
Dear Customer,
Gas Turbine Performance Reports (GTPRs) are used for
making basic information available that is required for
evaluating situations pertaining to operation of and damage
to your plant. Regular reporting on gas turbine operation Fig. 1 Error Message Triggered by Missing
enables a sound analysis of your plant. Process Comments
optimizations and/or suggestions for improvement can be
derived from these analyses. If the error message shown in Fig. 1 does not
appear, no entries must be made.
If we are to propose such suggestions for
optimization of your plant, it is essential that you
regularly return completed GTPR forms to us.
Activate generation of the transfer list (Client:
Module\Transfer Table). In doing so, always select the
previous month as the time frame.
General
The reproduction, transmission or use of this document
Steps
The steps for electronic generation of GTPRs with
WIN_TS are explained in the following. Proceed as
follows: Fig. 2 Event Editor
The event list is configured such that no existing entry
Launch the module by clicking this button:
is deleted or changed. If a change is made, the modified
Enter all events for which comments are required. If entry is appended to the list as a new event. The source
comments on events are missing, a corresponding entry is then marked as invalid.
error message is displayed on the screen, cf. Fig. 1 for
an example. Possible Functions in the Dialog Window Edit Event
Deactivate event
Class: RESTRICTED
Siemens AG 3.3-1708-0001/1
Power Generation MB 0205E-Y
Gas Turbine Gas Turbine in General
Fault Rectification Instructions for Completing GTPRs
Back up event Because the lead counter in the I&C system is not capable
The event that is displayed was edited and is to be of sending results to WIN_TS, a copy was installed.
included in the event list. If details stored in WIN_TS deviate, the data in
WIN_TS must be corrected accordingly.
Generate new event
A missing event is to be added subsequently. This Special Cases
function is used primarily to document events that
cannot be recorded automatically, for example, change- Off-line Compressor Cleaning Identified as Failed Start.
over from standby to outage conditions and vice versa. It is not always possible to distinguish between off-line
compressor cleaning immediately followed by a machine
The tables included in document 3.3-1710 (Table
standstill from a true failed start.
A D) list possible predefined entries that can be
selected for insertion in the comment fields. In such cases, enter the following data in the fields
shown below:
Urgency: G planned measure
Generating the Transfer Table for GTPRs Reason: H preventive measure
The GTPR is generated at Siemens from a transfer table. KKS: Off-line compressor cleaning
This table is generated as follows:
Note: None.
Call up the function Module\Generate Transfer
Table in the client. An event is not output from the list Events which Still
The reproduction, transmission or use of this document
filled in as follows:
Urgency: Z none
Reason: Z other
KKS: None.
Note: None.
actual times of plant operation. sheets on the first two pages and four explanatory tables
In addition, the data of the plant operating hours (Tab. A D) on the remaining pages of the document:
counter must be compared with those of the I&C system.
Siemens AG 3.3-1708-0001/2
Power Generation MB 0205E-Y
Gas Turbine Gas Turbine in General
Fault Rectification Instructions for Completing GTPRs
Plant code: e.g.: Sample plant the GTPR and the Fault Report Record are indicated
wherever possible:
Siemens T. No., e.g., 800 999 Unit 10 (= order
number) h. min. sec. sec/100 Column 2 of Fault Report
Record
Reporting month and year: e.g., June 2004
Time, using 24-hour notation:
Fill in the corresponding line for each day of the month.
hours, min. sec. 1/100 sec.
Filling in a line on the form is described in the following:
In the case of successful starts: Entry in column 15 of GEB
form sheet 2.
enter the number of successful starts in columns 1
MBJ01DE001 XN01 Column 4 of Fault Report
and 2 and
Record
enter operating hours in columns 5 to 11.
KKS of the subgroup
In the case of failed starts:
control/subloop control/group
enter failed starts in column 3 control/component that
the number of troubleshooting test starts in column triggered the failed start
4 and complete Record Sheet 2 Entry in column 25 of GEB
In the case of GT standstills: form sheet 2.
enter reserve outage hours in column 12 Startup frequency Column 7 of Fault Report
converter Record
enter non-availability hours in column 13 and
complete Record Sheet 2. Name of the superordinate
When adding columns 5 7 and 12 13 or columns Design Group, in this case:
8 11 and 12 13 the sum must always be 24 hours. startup frequency converter.
Siemens AG 3.3-1708-0001/3
Power Generation MB 0205E-Y
Gas Turbine Gas Turbine in General
Fault Rectification Instructions for Completing GTPRs
06 NI VORB Column 8 of Fault Report Column 20: Enter the time at which non-availability
Record began.
S06 denotes abortion of the Column 21: Enter the time at which non-availability
start as the action in question ended.
here: Interruption of the
startup sequence at Step 06; Column 22, Urgency of Shutdown
NI VORB means: it was not
Enter the urgency of the shutdown in line with the key
possible to prepare the startup
in Table A of Section 3.3-1710.
frequency converter.
Column 17: Enter rotor speed at the time the start was Column 26, Explanations
aborted (see control panel display).
Enter explanations of faults and non-availability periods
Column 18 19, Trip here. This entry should have a purely explanatory
character; i.e., the essential information on the
Column 18: Enter triggering criterion for the trip (see
fault/outage events must be given in the corresponding
control room display). At the present, it is not possible
columns 1 to 25 as the primary source of information.
to state this criterion in all cases.
Please do not use abbreviations here, as these often
Column 19: Enter power output at the time the trip cannot be decoded and thus render the entire entry in
occurred (see control panel display). column 26 useless.
Siemens AG 3.3-1708-0001/4
Power Generation MB 0205E-Y
Gas Turbine Gas Turbine in General
Fault Rectification Completion of GTPRs
Refer also to: (column 23, cf. key in Table B of Section 3.3-1710). The
fuel used at the time the failed start occurred was NG =
Instructions for Completing GTPRs 3.3-1708 natural gas (column 24, refer to fuel key in Table D of
Gas Turbine Performance Reports (GTPR) 3.3-1710 Section 3.3-1710).
The functional unit which triggered this failed start was
Explanations of Instructions for Manually the ignition gas pressure instrument, which detected
Completing GEBs insufficient pressure.
The associated KKS identifier (MBQ11CP001) is listed
Sample forms are included at the end of this Section.
in column 25 (source: Fault Report Record). Pinpointing of
the cause of the first failed start was completed at 11:30
Example 1: Normal Operation
p.m. and a second start attempted; this start attempt is
GT startup on 05.05.04 using normal loading gradient recorded as event number 18 (column 14).
(column 1).
The sum of the non-availability times listed in
20 hours at base load and 4 hours at peak load were
columns 20 and 21 for these two failed starts
logged (columns 5 and 6) during the course of the day;
must correspond to the entry in column 13,
operation was exclusively on gas fuel in premix mode
GTPR Record Sheet 1.
(column 11).
On 06.05.04, the machine was operated 24 hours at
base load (column 5); of this, a total of 12 hours were Example 3: Failed start with subsequent
troubleshooting test start
including rights created by patent grant or registration of
The reproduction, transmission or use of this document
or its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
Siemens AG 3.3-1709-0001/1
Power Generation MB 0205E-Y
Gas Turbine Gas Turbine in General
Fault Rectification Completion of GTPRs
criterion and column 19 the output immediately before trip includes the time remaining in May. The urgency and
(source for columns 18 and 19: control room). reason for the shutdown are entered in columns 22 and 23
The difference between the beginning and end time of (key: Tab. A and B, Section 3.3-1710) where H stands for
columns 20 and 21 must correspond to the entry in column annual scheduled outage program and G for major
13. inspection.
performed on the same day (indication thereof: no trip availability statistics and thus distorts the
noted on GTPR Sheet 2). Thereafter the major inspection assessment of overall plant operating
(annual scheduled outage program) was initiated (columns performance.
20 and 22).
a utility model or design, are reserved
Siemens AG 3.3-1709-0001/2
Power Generation MB 0205E-Y
Gas Turbine Gas Turbine in General
Fault Rectification Completion of GTPRs
Plant code: Sample plant Siemens T. no.: 800999 Unit 10 Reporting month/year: May 2004
Please submit Performance Reports by no later than the SIEMENS AG POWER GENERATION
15th of the following month to: PG O32
Mellinghofer Str. 55
D 45466 Muelheim/Ruhr
Order No. +49-208-456-4599
E-mail: GT-Performance-Report@pg.siemens.de
caused by troubleshooting
liquid gaseous
desired operating mode
with emergency loading
as a synchronous
in diffusion mode
Reserve outage
in premix mode
up to base load
Non-availability
and peak load
gradient
hours
Day
1 2 3 4 5 6 7 8 9 10 11 12 13
including rights created by patent grant or registration of
The reproduction, transmission or use of this document
or its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
01
02
03 Example 1: Normal Operation:
04
05
a utility model or design, are reserved
1 20 4 24
06 24 12 12
07 10 10 14
08
09
10
Example 2: Two failed starts
11 2 21 3
12
13
14
15 Example 3: Failed starts followed by troubleshooting test start
16
17 1 1 1 11 11 9 4
18
19
20
21
Example 4: Trip
22 2 21 21 3
23
24
25 Example 5: Annual Scheduled Outage Program
26
27 1 11 11 13
28 24
29 24
Class: RESTRICTED
30 24
31 24
X X X X X X X X X X X X X
Siemens AG 3.3-1709-0001/3
Power Generation MB 0205E-Y
The reproduction, transmission or use of this document or its
content is not permitted without express written authority.
Offenders will be liable for damages. All rights, including
rights created by patent grant or registration of a utility model
Class: RESTRICTED or design, are reserved.
SIEMENS AG POWER GENERATION Prepared by (name and department): Plant code: Sample plant
PG O32
Mellinghofer Str.55 John Doe Siemens T. no.: 800999 Unit 10
D 45466 Muelheim/Ruhr
Gas Turbine
Order No. +49-208-456-4599 Tel.: +49-2508-154-0815 FAX: -4711 Reporting May 2004
Power Generation
E-mail: GT-Performance-Report@pg.siemens.de
Fault Rectification
Siemens AG
Work produced in reporting period in kWh:
Scheduled/forced outage 123,456
Please enter data in columns 3, 4, and 13 of Record Sheet 1 Cumulative operating hours/starts (since initial
3)
startup)
Failed start trip Date of outage KKS identifier of plant item by the end of the previous month: 1234 / 123
Tab. A*
inspection): 6780
2)
1)
2)
2)
2)
Information sources:
please
1) = Control room log and Fault Report Record
annual, serial
Tab. D*
enter left-justified
2) = Control room
(1 character per box)
3) = Plant operating hours counter
* = cf. form sheet page 3
Information sources: Table C* Explanations of faults and non-availability
MB
periods: (To enter additional information on
Tab. B*
or Fault Report Record damage and replaced parts, please use the
Event No.,
Startup step
Criterion
Speed
Criterion
Output in MW
Day
Month
Time of day
Day
Month
Time of day
Urgency
Reason
Fuel
or defective component sheet entitled Problem Report).
14 15 16 17 18 19 20 21 22 23 24 25 26
Example 1: Normal operation: No entry necessary
Example 4: Trip
21 03 340 22 5 13:10 22 5 16:10 A B NG M B D 1 1 C T 0 2 1 Thrust bearing temperature (front) >120C
0205E-Y
3.3-1709-0001/4
until mid-June
Gas Turbine Gas Turbine in General
Fault Rectification Gas Turbine Performance Reports (GTPR)
Non-availability hours
that did not culminate
liquid gaseous
with normal loading
as a synchronous
loading gradient
Reserve outage
with emergency
operating mode
up to base load
in premix mode
troubleshooting
with distillate
in diffusion
caused by
gradient
fuel oil
mode
Day
1 2 3 4 5 6 7 8 9 10 11 12 13
01
including rights created by patent grant or registration of
The reproduction, transmission or use of this document
02
03
04
05
a utility model or design, are reserved
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
Class: RESTRICTED
30
31
Siemens AG 3.3-1710-0001/1
Power Generation MB 0205E-Y
The reproduction, transmission or use of this document or its
content is not permitted without express written authority.
Offenders will be liable for damages. All rights, including
rights created by patent grant or registration of a utility model
Class: RESTRICTED or design, are reserved.
Power Generation
E-mail: GT-Performance-Report@pg.siemens.de
Fault Rectification
Siemens AG
Work produced in reporting period in kWh:
Scheduled/forced outage __________________________
Please enter data in columns 3, 4, and 13 of Record Sheet 1 Cumulative operating hours/starts (since
3)
initial startup)
Failed start Trip Date of outage KKS identifier of plant item by the end of the previous month: ___ / ____
Tab. A*
Tab. B*
Tab. D*
inspection): _____________________
2)
1)
2)
2)
2)
Information sources:
please
1) = Control room log and Fault Report Record
annual, serial
enter left-justified
2) = Control room
(1 character per box)
3) = Plant operating hours counter
* = cf. form sheet page 3
Explanations of faults and non-availability
MB
Information sources: Table C*
periods: (To enter additional information on
or Fault Report Record damage and replaced parts, please use the
Event No.,
Startup step
Criterion
Speed
Criterion
Output in MW
Day
Month
Time of day
Day
Month
Time of day
Urgency
Reason
Fuel
or defective component sheet entitled Problem Report).
14 15 16 17 18 19 20 21 22 23 24 25 26
Gas Turbine in General
Gas Turbine Performance Reports (GTPR)
0205E-Y
3.3-1710-0001/2
Gas Turbine Gas Turbine in General
Fault Rectification Gas Turbine Performance Reports (GTPR)
Table A
Key to Column 22
Urgency of Shutdown
outage period
G Can be postponed until beyond the next weekend
Scheduled
H Annual Outage Program (measures planned far in advance)
Z None (measures that can be performed at any desired time)
including rights created by patent grant or registration of
The reproduction, transmission or use of this document
Table B
Key to Column 23
Siemens AG 3.3-1710-0001/3
Power Generation MB 0205E-Y
Gas Turbine Gas Turbine in General
Fault Rectification Gas Turbine Performance Reports (GTPR)
Table C
Key to Column 25
Components Causing Outage (KKS Identifiers)
A Auxiliary Systems MA Steam turbine plant
ABA 420kV system MAA HP turbine
AR Safety system MAB IP turbine
AT Auxiliary System MAC LP turbine
MAD Bearings
B Power transmission and auxiliary power supply MAH Motive water system
BAA Generator leads MAK Transmission gear between prime mover and driven
BAT Generator transformers including cooling system machine, incl. turning gear
BB MV distribution boards and transformers, normal system MAL Drain and vent systems
BBE Medium-voltage distribution board MAM Leak-off steam system
BBT MV auxiliary power transformers MAV Lubricant supply system
BF LV main distribution boards and transformers, normal system MAW Sealing, heating, and cooling steam system
BT Battery systems MAX Non-electric control and protection equipment, incl.
BUB DC distribution board fluid supply system
C Instrumentation and control equipment MAY Electrical control and protection equipment
CH Protection MB Gas turbine plant
CHA Cabinets for generator and transformer protection MBA Turbine, compressor rotor with common casing
CJF Boiler control system MBD Bearings
CJN Instrumentation and control cabinets for steam turbine set
including rights created by patent grant or registration of
The reproduction, transmission or use of this document
Siemens AG 3.3-1710-0001/4
Power Generation MB 0205E-Y
Gas Turbine Gas Turbine in General
Fault Rectification Gas Turbine Performance Reports (GTPR)
Table D
Key to Column 24
Fuel Abbreviations
Siemens AG 3.3-1710-0001/5
Power Generation MB 0205E-Y
Gas Turbine Gas Turbine in General
Fault Rectification Vibration
vibration can be expressed as an effective value, as a peak occurs, investigations must be performed together with the
value (single amplitude) or as peak-to-peak (double manufacturer to pinpoint their cause and define targeted
amplitude). In the USA, for example, vibration amplitude is measures to eliminate them. It is not practicable to give a
usually expressed as a peak-to-peak value. complete overview of causes and the resultant remedial
a utility model or design, are reserved
Siemens AG 3.3-1780-0001/1
Power Generation MB 0404E-Y
Gas Turbine Gas Turbine in General
Fault Rectification Vibration
Thermal factors can usually be identified by continuous line of shafting in the power plant as field rebalancing
transitions of vibration parameters on load or measures performed previously are no longer suitable for
temperature change. Differences in the heat transfer the new situation.
coefficient at the shaft surface may cause shaft bowing One frequently-made error is performing only one
and thus changes in the quality of shaft balancing. vibration measurement shortly after reaching operating
Vibration usually increases with load or temperature. speed and then shutting down the turbine-generator for the
After a sufficient time has elapsed, temperatures are purpose of placing balancing weights. Measured data of
equalized, thereby offsetting this effect. If the warm-up this kind are not representative for the actual balancing
process is decelerated, this type of disturbance is condition. A steady-state condition must be achieved, this
correspondingly less pronounced. Even slight frequently takes many hours. Quality balancing can only be
temperature differences may be sufficient to cause achieved if reliably reproducible data are available. For the
substantial changes in vibration behavior. This fact is of above-mentioned reasons, we urgently recommend that
particular significance for the gas turbine rotor, as this only appropriately qualified personnel is assigned to
item is unavoidably subjected to very rapid temperature perform rebalancing work.
increases.
If it is necessary to question the reproducibility of a
Thermally-induced vibrational disturbances with a so- given turbine-generator's vibration behavior, then it is more
called "linking effect" also occur, however less expedient to repeat measurements than to begin
frequently. At low output running behavior is initially rebalancing. Should this not become evident until after
good, vibration increases with increasing output but commencement of rebalancing, one should consider
does not return to its initial level when output is restoring the initial condition (i.e. remove all weights added
including rights created by patent grant or registration of
The reproduction, transmission or use of this document
decreased. In such cases thermal effects are in the course of rebalancing) and determine whether the
compounded by mechanical factors. balance condition is reproducible.
If the shaft rubs against the gland seal strips or inner A limited number of balancing planes are available for
casing, localized temperature increases cause slight rebalancing in the power plant. This fact often has the
a utility model or design, are reserved
shaft bowing and also induce thermal unbalance. result that only partial improvement of balance condition
Clearances may also be bridged at the bearing housing can be achieved, i.e., a portion of the vibrations can be
oil wiper rings which may cause formation of oil coke. reduced but at the cost of degraded vibration performance
at other measuring points or under other operating
Subharmonic Vibration conditions. If one is to accurately recognize this
A loose connection in the load path anchoring rotating contradictory situation during rebalancing, it is necessary to
machinery to the foundation is one possible cause of this register vibrations at all measuring points and under all
rarely-occurring disturbance. Such vibrational components operating conditions as comprehensively as possible. This
can only be detected by frequency analysis. is the only way to find an optimal compromise between
technical and economic considerations.
As a rule, a minimum of five days should be scheduled
Balancing
for performing rebalancing work. This time frame is based
Unbalance is not directly measurable. It can only be on placement of balancing weights and the requisite
recognized by its effect on vibration. When rebalancing, steady-state test runs. If the time requirements of previous
additional balancing weights are either added to the rotor or rebalancing work are known, it may be reasonably possible
weights previously installed are removed to largely to schedule less time for rebalancing.
compensate for existing unbalance. Balancing merely Incorrect conclusions regarding evaluation of the
establishes an equilibrium between the original unbalance system's sensitivity to unbalance are often drawn on the
and the newly-placed balancing weights. basis of rebalancing results. If a system only slightly
This fact has a definitely practical significance, responds to test unbalance masses this by no means
particularly in the case of subsequent rebalancing indicates that substantial unbalance is involved. It is also
measures performed in the power plant. Rebalancing rarely possible that the test unbalance mass in this case also lies
improves the balance condition of a single shaft, instead it in the selected balancing plane and is thus ineffective due
merely improves the running behavior of the overall power to nodal proximity. Conversely, the following conclusion is
train. In practical terms, if a rotor is replaced after possible: if minor unbalance triggers substantial change in
Class: RESTRICTED
rebalancing in a major inspection or is completely vibration behavior, this is clearly indicative of increased
rebalanced during repair in the factory, it may be necessary vibration sensitivity to test unbalance masses.
to perform further rebalancing after connecting the entire
Siemens AG 3.3-1780-0001/2
Power Generation MB 0404E-Y
Gas Turbine Gas Turbine in General
Fault Rectification Vibration
Before stating any vibration data, always convert to Zone B: Machines with vibration within this zone are
those units stipulated in the ISO standards, that is, express normally considered acceptable for unrestricted
bearing housing vibration in mm/seff or mm/srms and shaft continuous operation.
vibration in mpp (peak-to-peak). The following equations Zone C: Machines with vibration within this one are
a utility model or design, are reserved
apply for conversion (sinusoidal vibration): normally considered unsatisfactory for long-term
continuous operation. Generally, the machine may be
Vibration velocity: operated for a limited period in this condition until a
1 (mm/s)pk = 0.707 mm/seff suitable opportunity arises for remedial action.
Zone D: Vibration values within this zone are normally
1 (inch/s)rms = 25.4 mm/seff considered to be of sufficient severity to cause damage
to the machine.
1 (inch/s)pk = 18 mm/seff These evaluations enable the operator to diagnose the
vibration condition of a machine and provide clear
Vibration amplitude: instructions regarding any necessary measures.
1
1 milpp = inchpp = 25.4 mpp Evaluation zone limits for vibration velocity veff for
1000
measurements on non-rotating parts per ISO 10816-4
Zone limit A/B veff = 4.5 mm/seff
Examples:
Zone limit B/C veff = 9.3 mm/seff (alarm)
Vibration velocity:
Zone limit C/D veff = 14.7 mm/seff (trip)
vpk = 13.15 mm/s veff = 13.15 * 0.707 mm/seff = 9.3 mm/seff
Siemens AG 3.3-1780-0001/3
Power Generation MB 0404E-Y
Gas Turbine Gas Turbine in General
Fault Rectification Vibration
turbine-generator must be shut down immediately, even if to make a preliminary assessment of the problem and
the accuracy of the display is in doubt. Such noises are possibly derive measures for rectifying the problems.
indicative of mechanical damage (blade damage or Please send the completed questionnaire to the respective
massive rubbing damage). department or your service sales department liaison at
corporate headquarters.
Fault Causes and Rectification Siemens has set up a 24-hour hotline service for
handling urgent situations.
Despite all mechanical design, fabrication and
installation measures, vibration may occur as described
above due to factors which, as they usually compound For prompt assistance contact:
each other, are sometimes difficult to quantify. If increased Siemens AG
vibration occurs, investigations must be performed together Power Generation PG
with the manufacturer to pinpoint their cause and define
Fossil and Renewable Power Generation Division
targeted measures to eliminate them. It is not practicable to
give a complete overview of causes and the resultant 24-Hour Hotline
remedial measures. The table-(pp. 5-7)-merely points out Phone: +49 172-307-1609
characteristics, and causes of as well as countermeasures Fax: +49-30-3464-4221
for several possible vibration phenomena which may occur. E-Mail: OW2Hotline@bln12.siemens.de
Vibration Problems
The following questionnaire (pp. 9-12) should be filled
out as completely as possible if vibration problems occur at
a utility model or design, are reserved
Siemens AG 3.3-1780-0001/4
Power Generation MB 0404E-Y
Gas Turbine Gas Turbine in General
Fault Rectification Vibration
Rapid or instantaneous
increase in vibration.
loud noises, change in GT Possible damage, e.g. Shut down turbine-generator immediately, even if the
parameters (output, OTC, NOX) blade damage, rubbing accuracy of the display is in doubt. Observe whether the
observed damage (bridging of axial increase in vibration also occurs during coastdown.
clearances) Measure coastdown time. Inspect GT.
Significantly elevated bearing Bearing damage Check affected bearings and surrounding area.
metal temperatures
frequency components
Temporary increase in Transient vibration These are faults with thermal origins observed during
a utility model or design, are reserved
vibration under transient changes in load and temperature and are generally of only
operating conditions brief duration. This vibration behavior is a known
phenomenon typical for gas turbines. Increased vibration
during loading or load changes is often caused by thermally-
induced unbalance. This results from a rotationally
asymmetric temperature distribution within the rotor due to
very slightly uneven heating. The magnitude of thermally-
induced unbalance is a function of various parameters and
may change more or less significantly over time.
The effects of thermally-induced unbalance can usually
be mitigated by rebalancing. If the warm-up process is
slowed down, the phenomenon is less pronounced.
Rubbing If the shaft briefly rubs against the gland seal strips or inner
casing, localized temperature increases cause slight shaft
bowing and thus induce thermal unbalance. Rubbing-induced
faults are identified using special instrumentation, often in
combination with polar vector diagrams.
These rubbing effects can be eliminated by balancing
and/or reducing the load change rate.
Siemens AG 3.3-1780-0001/5
Power Generation MB 0404E-Y
Gas Turbine Gas Turbine in General
Fault Rectification Vibration
Increased vibration over the Thermally induced faults Thermal factors can usually be identified by continuous
entire load range under (general) transitions of vibration parameters on load or temperature
steady-state operating con- change. As a rule, vibration increases with load or
ditions; elevated vibration temperature. The specific load conditions corresponding to
relative to previously deter- vibrational conditions are usually reproducible.
mined values while passing The effects of thermally-induced unbalance can usually
through natural frequencies be mitigated by rebalancing.
distribution of unbalance
along the rotor
Vibration occurs as a Unstable rotor balance due Oil whip/oil whirl leads to instability. Frequency analysis
function of lube oil to self-induced vibration identifies these vibrations. This phenomenon has so far not
temperature; frequency is been observed in Siemens gas turbines, however.
approximately 0.46 - 0.48x
rotational frequency
Class: RESTRICTED
Siemens AG 3.3-1780-0001/6
Power Generation MB 0404E-Y
Gas Turbine Gas Turbine in General
Fault Rectification Vibration
Subharmonic vibration Slack in the load path A non-linear spring characteristic results if the connection
components between the foundation and between the foundation and the bearing housing is not firmly
the bearing housings bolted. Such vibrations can often be identified on control
room multi-channel strip charts or by frequency analysis.
Check the load path between the foundation and the
bearing housing. Change oil inlet temperature; it may be
necessary to increase damping the plain bearings. Notify
the manufacturer. This phenomenon has so far not
occurred with Siemens gas turbines.
Vibration occurs at 2x Mechanical or magnetic As a rule, turbine-generators with two-pole generators also
rotational frequency excitation by the generator sustain vibration at a frequency equal to 2x rotational
frequency. Detection of such vibrations requires
measurement at selected frequencies.
a utility model or design, are reserved
High-frequency vibration Faulty measurement chain Under unfavorable conditions (special frequency
components constellations, modulation of low-frequency components),
high-frequency vibration may interfere with/invalidate the
actual measurements.
Check the entire instrumentation chain, including the
mounts for the mechanical filter and accelerometer.
Perform control measurements.
Increased vibration during Excessive/elevated Pass through these speed ranges as quickly as possible;
startup or shutdown amplitudes while passing rebalance after consulting the manufacturer in the event
through natural frequencies of more significant disturbances.
of the system
Class: RESTRICTED
Siemens AG 3.3-1780-0001/7
Power Generation MB 0404E-Y
Gas Turbine Gas Turbine in General
Fault Rectification Vibration
8. How long has the problem persisted? Was the change sudden or
progressive?
Class: RESTRICTED
Siemens AG 3.3-1780-0001/8
Power Generation MB 0404E-Y
Gas Turbine Gas Turbine in General
Fault Rectification Vibration
same manner?
yes .......................................
no (explain) .......................................
a utility model or design, are reserved
Siemens AG 3.3-1780-0001/9
Power Generation MB 0404E-Y
Gas Turbine Gas Turbine in General
Fault Rectification Vibration
19. Were readings checked for plausibility (e.g., using hand-held instruments),
to determine whether standard instrumentation was faulted?
Yes (explain, results - always include dimension with measurements!) .......................................
no .......................................
no .......................................
Siemens AG 3.3-1780-0001/10
Power Generation MB 0404E-Y
Gas Turbine Gas Turbine in General
Fault Rectification Vibration
no (explain) .......................................
no .......................................
34. What work specified in TISLs was or was not performed which could
be related to machine vibration behavior?
Provide information on a separate sheet. .......................................
Siemens AG 3.3-1780-0001/11
Power Generation MB 0404E-Y
Gas Turbine Gas Turbine Bearing
Fault Rectification Vibration Protection
with Casing Vibration Measurement
System: MBD
Siemens AG 3.3-1783-6000/1
Power Generation MBD 0399E-X
Gas Turbine Gas Turbine Bearing
Fault Rectification Vibration Protection
with Casing Vibration Measurement
Siemens AG 3.3-1783-6000/2
Power Generation MBD 0399E-X
Gas Turbine Gas Turbine Bearing
Fault Rectification Vibration Protection
with Casing Vibration Measurement
Siemens AG 3.3-1783-6000/3
Power Generation MBD 0399E-X
Gas Turbine Gas Turbine Bearing
Fault Rectification Vibration Protection with Casing Vibration
Measurement / Measuring Instruments
System: MBD
Turbine bearing vibration sor module identifies fault in Vibration transmitter failure. Shut down GT as soon as
protection faulted one channel. Measuring possible to rectify the fault.
range of one channel posi- The calibration module can
and/or tively or negatively violated. be used to identify the fault.
Measured vibration deviates
MYB01CY932XK93 between the two channels by
Compressor bearing vibra- more than Y.LAGER.02 (cf.
tion detection faulted SREL for setpoint) for at least
3 s.
Class: RESTRICTED
Siemens AG 3.3-1784-6000
Power Generation MBD 0399E-X
Gas Turbine Gas Turbine Bearing
Fault Rectification Shaft Vibration Indication/
Measuring Instruments
System: MBD
Siemens AG 3.3-1785-6000
Power Generation MBD 0399E-X
*DV7XUELQH *DV7XUELQH%HDULQJ
)DXOW5HFWLILFDWLRQ 7XUELQH%HDULQJ3URWHFWLRQ
6\VWHP0%'
DXWKRULW\2IIHQGHUVZLOOEHOLDEOHIRUGDPDJHV$OOULJKWV
RU LWV FRQWHQW LV QRW SHUPLWWHG ZLWKRXW H[SUHVV ZULWWHQ
LQFOXGLQJULJKWVFUHDWHGE\SDWHQWJUDQWRUUHJLVWUDWLRQRI
*7SURWHFWLRQIDXOWHG
0<%&7;. $YDLODELOLW\RIWKHPHDVXULQJ 0HDVXULQJFLUFXLWIDXOWHG 'LVFRQQHFWGHIHFWLYHWKHU
*HQHUDWRUHQGWKUXVWEHDU FLUFXLWLVUHVWULFWHG EURNHQZLUHOHDG PRFRXSOHDQGFRQQHFW
LQJWHPSHUDWXUHPRQLWRULQJ VSDUHWKHUPRFRXSOH
DXWLOLW\PRGHORUGHVLJQDUHUHVHUYHG
2QHWKHUPRFRXSOHRIWKH 5HSODFHPHDVXULQJSRLQW
IDXOWHG
PHDVXULQJSRLQWPD\EH GXULQJWKHQH[WVFKHGXOHG
GHIHFWLYH RXWDJHEHFDXVHWKH*7
PXVWEHVKXWGRZQXVLQJWKH
6KXWGRZQ3URJUDPLIDOORI
WKHWKHUPRFRXSOHVDWRQH
HQGRIWKH*7DUHIDXOWHG
DQGRU
0<%&7;.
7XUELQHHQGWKUXVWEHDULQJ
WHPSHUDWXUHPRQLWRULQJ
IDXOWHG
DQG
0<%(==9
3URWHFWLRQFKDQQHOIDLOHG
DQG
*7SURWHFWLRQIDXOWHG
&ODVV5(675,&7('
6LHPHQV$*
3RZHU*HQHUDWLRQ 0%' (;
*DV7XUELQH *DV7XUELQH%HDULQJ
)DXOW5HFWLILFDWLRQ 7XUELQH%HDULQJ
6\VWHP0%'
DXWKRULW\2IIHQGHUVZLOOEHOLDEOHIRUGDPDJHV$OOULJKWV
RU LWV FRQWHQW LV QRW SHUPLWWHG ZLWKRXW H[SUHVV ZULWWHQ
LQFOXGLQJULJKWVFUHDWHGE\SDWHQWJUDQWRUUHJLVWUDWLRQRI
FRQGLWLRQV
$OOEHDULQJPHWDOWHPSHUD 2LOFRROHUIDXOWHG 5HFWLI\IDXOW
WXUHVFKDQJH
RLOWHPSHUDWXUHGRZQVWUHDP
RIRLOFRROHUFKDQJHV
6LHPHQV$*
3RZHU*HQHUDWLRQ 0%' (;
*DV7XUELQH *DV7XUELQH%HDULQJ
)DXOW5HFWLILFDWLRQ 7XUELQH%HDULQJ
6\VWHP0%'
DXWKRULW\2IIHQGHUVZLOOEHOLDEOHIRUGDPDJHV$OOULJKWV
RU LWV FRQWHQW LV QRW SHUPLWWHG ZLWKRXW H[SUHVV ZULWWHQ
LQFOXGLQJULJKWVFUHDWHGE\SDWHQWJUDQWRUUHJLVWUDWLRQRI
QRWREVHUYHGWRGDWH
*DVWXUELQHWULS
DQGRU
0<%(=;.
7XUELQHHQGWKUXVWEHDULQJ
WULS
DQG
*7WULS
&ODVV5(675,&7('
6LHPHQV$*
3RZHU*HQHUDWLRQ 0%' (;
Gas Turbine Fuel Supply System (liquid)
Fault Rectification Leakage Oil Monitoring
System: MBN
MBN34EU001 ZV01 FO diffusion trip The diffusion leakage oil FO diffusion trip initiated by
Diffusion leakage oil pressure valve in the leakage oil line higher-level controller.
a utility model or design, are reserved
Increase in pressure in
> MAX has not opened within
leakage oil line(cf. List of Shut down GT.
K.LECKOEL.01 (cf. SREL for
Measuring Instruments for
setpoint) after the OPEN Check solenoid valve and
setpoint)
command has been issued. replace, if necessary.
MBN44EU001 ZV01 FO premix trip The premix leakage oil valve FO premix trip initiated by
Premix leakage oil pressure in the leakage oil line has not higher-level controller.
Increase in pressure in
> MAX opened within
leakage oil line Shut down GT.
K.LECKOEL.01 (cf. SREL for
setpoint) after the OPEN Check solenoid valve and
command has been issued. replace, if necessary.
Siemens AG 3.3-4530-6000
Power Generation MBN 0898E-X
Gas Turbine Fuel Supply System (liquid)
Fault Rectification Leakage Oil Monitoring /
Measuring Instruments
System: MBN
Siemens AG 3.3-4540-6000
Power Generation MBN 0898E-X
Gas Turbine Time Schedule for Maintenance
Maintenance Intervals for Cleaning Filters and Strainers
Siemens AG 3.4-0143-0001
Power Generation MB 1103E-X
Gas Turbine Time Schedule for Maintenance
Maintenance Inspection and Maintenance Intervals
All values for control settings given in this section are every 4000 operating hours
examples, exact values are listed in section 3.1-0210. every 8000 operating hours
after outages lasting longer than 1 month.
General
If the GT is in continuous power operation, it is appro-
High GT availability and reliability require regular in- priate to postpone the 2000 and 4000 operating hour in-
spection of representative components. spections until the next shutdown.
The plant equipment and scope of inspection listed The inspections must be organized in such a way that
here is by no means complete and must be continually the impact on operation of the GT is minimized.
modified by each operator on the basis of his operating
Many of the inspections should be performed during
experience. The maintenance procedures is helpful to the
operation to permit evaluation of the system under operat-
customer.
The reproduction, transmission or use of this document
ing conditions.
This maintenance instruction is a recommendation to
Inspections performed with the GT at standstill must be
the customer. The manufacturers documentation is bind-
performed during scheduled outages (e.g. on weekends)
ing. Maintenance, inspections and major inspections shall
using a detailed inspection program (e.g. checklists).
be performed exclusively by specialist personnel. Lubrica-
a utility model or design, are reserved
Siemens AG 3.4-0156-0592/1
Power Generation MB 0306E-X
Gas Turbine Time Schedule for Maintenance
Maintenance Inspection and Maintenance Intervals
Siemens AG 3.4-0156-0592/2
Power Generation MB 0306E-X
Gas Turbine Time Schedule for Maintenance
Maintenance Inspection and Maintenance Intervals
Inspection interval: 100 operating hours, but at least once per month
KKS Component/Equipment Test Op. Instructions/Information
System Co.
Data Aquisition: L/B Record 3.7-1070
MBA temperature and pressure up- Enter measured values into the L/B
Note:
stream of the compressor operating log using indicating in-
Data collection must be
temperature and pressure down- struments.
performed as close to
stream of the compressor Record measure values using simultaneously as pos-
Turbine Exhaust Temperature process computers and print log. sible and at identical
load when possible.
MBD...CT Bearing Metal Temperature at: Compare both sets of measure- L/B If discrepancies are found,
repeat measurements. (To
turbine bearing ments with previous data.
eliminate reading errors or
compressor bearing (journal) measurement equipment
thrust bearing faults.)
Siemens AG 3.4-0156-0592/3
Power Generation MB 0306E-X
Gas Turbine Time Schedule for Maintenance
Maintenance Inspection and Maintenance Intervals
Inspection interval: 100 operating hours, but at least once per month
KKS Component/Equipment Test Op. Instructions/Information
System Co.
All KKS Measuring, Display and Supervi- Visual check of all pressure gau- O
systems sory Equipment Note:
ges, pressure switches, tempera-
Enter all measuring
ture switches, thermocouples, re-
instruments (cf. 3.1-
sistance thermometers, sensors,
0220) in a checklist and
limit position sensors, position
document inspection
transducers, travel indicators,
findings.
fouling indicators, etc.
Check for functional safety and Deviations from normal
correct installation. conditions must be
rectified either immedi-
ately or during the next
outage, as indicated by
the findings.
All Piping and Equipment Visual check of leaktightness B During operation ac-
cessable part.
The reproduction, transmission or use of this document
Siemens AG 3.4-0156-0592/4
Power Generation MB 0306E-X
Gas Turbine Time Schedule for Maintenance
Maintenance Inspection and Maintenance Intervals
Venting valve
Natural gas pressure relief valve
MBY Speed Controller Inspection During GT Runup SC Time at which cut-in oc-
curs according to 3.1-
Speed controller cut-in.
a utility model or design, are reserved
0210.
Transition from startup control to
speed control.
Change speed using speed set-
point adjuster.
Check fuel control valve lift and
change in speed.
All KKS All Piping and Equipment Visual check of leaktightness S Part that is only ac-
systems cessable during standstill.
Class: RESTRICTED
Siemens AG 3.4-0156-0592/5
Power Generation MB 0306E-X
Gas Turbine Time Schedule for Maintenance
Maintenance Inspection and Maintenance Intervals
compressor bearing
Check setpoints for proper actua- S Refer to 3.1-0210 for
tion and annunciation of alarms. actuation values for
alarms and actuation.
MKD...CY S Refer to 3.1-0210 for
a utility model or design, are reserved
Siemens AG 3.4-0156-0592/6
Power Generation MB 0306E-X
Gas Turbine Time Schedule for Maintenance
Maintenance Inspection and Maintenance Intervals
Siemens AG 3.4-0156-0592/7
Power Generation MB 0306E-X
Gas Turbine Time Schedule for Maintenance
Maintenance Inspection and Maintenance Intervals
limits.
< P.GAS.07 (GT trip in the event
of increased drop in natural gas
pressure and changeover is not
completed).
MYB Buttons for Initiating GT Trip Manual initiation of GT trip using S
Emergency stop button remote or central control room
emergency stop buttons.
GT All gas turbine parts as per minor In addition to the above- S Cf. 3.4-8100
design inspection check list mentioned inspections, the 8000
groups Note:
hour inspection shall include the
Order latest checklist
scope of the appropriate inspec-
from Siemens in ad-
tion check list.
vance of every minor
inspection.
Class: RESTRICTED
Siemens AG 3.4-0156-0592/8
Power Generation MB 0306E-X
Gas Turbine Time Schedule for Maintenance
Maintenance Inspection and Maintenance Intervals
Temperature Indicator for OTC Check measured values on dis- S Compare current meas-
play and recorder. ured value with ambient
temperature.
Adjustment of Compressor Sta- Check min. and max. positions S Manually control actuator.
tionary Blade Pitch using position indicator. (Control console)
MBA/ Compressor Surge Protection Ensure that trip is initiated and a S Refer to applicable func-
MBM fault alarm annunciated in re- tion diagrams for I&C
conditions. Use simulated
sponse to limit violation in either
inputs to violate limits.
direction.
MBD / Bearings Ensure actuation and annuncia- S Observe change in bear-
MKD...CT ing metal temperature with
The reproduction, transmission or use of this document
violation.
MBM Combustion Chamber Check during start-up of GT: SC NG/FO ESV must close
12 s after opening.
Flame Monitoring (Monitoring of Check ignition flame cutout safety
Ignition Flame Cutout Safety De- delay in absence of main flame.
lay)
MBP Natural Gas System Check function of vented gas S Simulate actuation to
initiate trip.
Natural Gas Second Shutoff seal during trip.
Valve
(NG Diffusion CV, NG Premix
CV, Pilot Gas CV)/ NG ESV/
NG Venting Valve
MYB Buttons for Initiation of GT Trip Ensure manual initiation of GT S
Emergency stop button trip using remote or control room
emergency stop button.
Class: RESTRICTED
Siemens AG 3.4-0156-0592/9
Power Generation MB 0306E-X
Gas Turbine Time Schedules for Maintenance
Maintenance Lubrication Chart
Lube oint
No. of
Relubrication
KKS Item Supplier with ... 1) Amt. Interval Remarks
Inspection according
to vendor documenta-
tion incl. replacement
Swivel drive: gear DEA: Glissando of lubricant (3.9-
MBA11AS001-M01 box AUMA TR 0.9 kg 6 - 8 years 0010)
Inspection according
MBH22AA101-M01 to vendor documenta-
MBH22AA102-M01 tion incl. replacement
MBH23AA101-M01 Swivel drive: gear DEA: Glissando of lubricant (3.9-
MBH23AA102-M01 box AUMA 1 TR - 6 - 8 years 0010)
Disassembly accord-
ing to vendor manual
necessary.
Swivel drive: worm DEA: Glissando 6 - 8 years * if seldom operated
gear AUMA TR - * 10-12 years
including rights created by patent grant or registration of
The reproduction, transmission or use of this document
or its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
1) Avoid mixing lubricants! For more details, inital lubricant and alternative lubricants see respective vendor documentation (for location
of vendor documents see 3.9-0010 Table of Contents for Outside Vendor Parts)
**) Bearing is lubed for extended service. Due to aging, which is independent of operating hours, grease should be renewed at the inter-
a utility model or design, are reserved
vals indicated in parentheses. Bearing replacement is, however, recommended over regreasing.
Class: RESTRICTED
Siemens AG 3.4-0200-0592
Power Generation MB 0306E-X
Gas Turbine Description of Maintenance
Maintenance Measures to Be Implemented following
Compressor Surging
and vanes
G Visual inspection of control actuators and indexing
Rubbing marks on blades and stationary blade
mechanisms, pressure transducers, solenoid valves
carriers
Siemens AG 3.4-1003-9000/1
Power Generation MB 0900E-X
Gas Turbine Description of Maintenance
Maintenance Measures to Be Implemented following
Compressor Surging
Siemens AG 3.4-1003-9000/2
Power Generation MB 0900E-X
Gas Turbine Description of Maintenance
Maintenance NORD-LOCK Permanently Tight Washers
Description
The NORD-LOCK system comprises a pair of identical
washers with radial ridges on their outer surfaces and
asymmetric "saw tooth" cams on their inner surfaces.
The reproduction, transmission or use of this document
Siemens AG 3.4-1004-0001/1
Power Generation MB 0200E-Y
Gas Turbine Description of Maintenance
Maintenance NORD-LOCK Permanently Tight Washers
Siemens AG 3.4-1004-0001/2
Power Generation MB 0200E-Y
Gas Turbine Description of Maintenance
Maintenance Inspection of the Annular Combustion Chamber
Lining after Humming/Accelerations
damage. Violation of these limits is detected by monitoring P.BRUMM.01, P.BRUMM.02 and P.BRUMM.06 (see 3.1-
functions that perform measurement of annular combustor 0210 for numeric values). This makes it possible to
acceleration and pressure fluctuation and then generate determine the duration of each instance in which limits
corresponding limits. In plants with liquid fuel, pressure were violated (e.g. 5 s). The same also applies for the
fluctuation and acceleration monitoring are installed in acceleration limits S.ACC.01, S.ACC.02, S.ACC.03,
parallel and concurrently active. In the case of machines S.ACC.04 and S.ACC.05.
run exclusively on gaseous fuel, acceleration monitoring is
The maximum humming duration limit GW2,
active as a protection function, pressure fluctuation
K.BRUMM.13 (e.g. 30 s) is recorded cumulatively and can
monitoring is only installed for making initial settings.
or design, are reserved.
Siemens AG 3.4-1007-9000/1
Power Generation MB 0901E-X
Gas Turbine Description of Maintenance
Maintenance Inspection of the Annular Combustion Chamber
Lining after Humming/Accelerations
Inspection of Combustion Chamber G Inspection and evaluation of ceramic heat shields per
Items 3.7-0240 and the CHS holders per 3.7-0245. The
plastic sheeting template sets listed in Tab. 1 shall be
Danger! used for evaluation of ceramic heat shields:
Danger of burns: the GT must have
G After completion of all inspections performed in the
sufficiently cooled down before
entire combustion chamber, reset the meter which
performing the inspection.
records the cumulative time. In the event of inspections
Warning! performed at a later time, the templates used for
Risk of equipment damage: Combustion evaluation are selected on the basis of the event(s) that
chamber inspections and replacement of triggered the inspection.
combustion chamber items shall only be
performed by personnel specially trained
for these tasks. Otherwise damage to the
combustor tiles could go undetected and
result in extensive turbine damage.
Tab. 1: Selection of Template Set on the Basis of the Event that Triggered Inspection
Siemens AG 3.4-1007-9000/2
Power Generation MB 0901E-X
Gas Turbine Description of Maintenance
Maintenance Testing of Flame Monitoring System
General Procedure
The hybrid burner ring combustor is equipped with 2 The flame monitors are tested by blocking the flame
flame monitoring systems (flame monitors) for reasons of light path to the flame detector.
both safety and availability. The flame monitors are ar- This can be done by holding a sheet of metal or card-
ranged offset from one another on the circumference of board, for example, between the sight glass end plate on
the hybrid burner ring combustor. The function of the flame the combustion chamber sight pipe and the photodiode of
monitors is described in greater detail in 3.1-3000. the flame detector. This blocks the flame light path and no
The flame monitors operate independently of one an- flame signal is received by the monitoring system.
other. This permits the performance of function tests on The following steps shall be performed:
individual flame monitors during operation of the GT.
If trip occurs during steps 1 or 2, immediately
Cleaning of the silicate glass in the combustion cham- check the settings of the entire flame monitoring
ber sight pipe and the lenses of the flame detectors is system as specified in the operating manual
recommended prior to testing. from the manufacturer (see 3.9-0010) and the
Refer to section 3.4-0156 for test intervals. I&C documentation (settings made on commis-
sioning; see I&C commissioning documentation).
Test Objectives G Cover the flame detector at one of the sight pipes.
Fault alarm "Flame monitor faulted" is annunciated.
The flame monitor function check comprises checks of "Main flame OUT" must not be annunciated.
the flame detectors on the combustion chamber and the
or its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
The reproduction, transmission or use of this document
Siemens AG 3.4-5009-9000
Power Generation MBM 0500E-X
*DV7XUELQH 0LQRU,QVSHFWLRQ
0DLQWHQDQFH *HQHUDO&RPSRQHQW7HVWLQJ
6FRSH &RPSUHVVRU
DXWKRULW\2IIHQGHUVZLOOEHOLDEOHIRUGDPDJHV$OOULJKWV
RU LWV FRQWHQW LV QRW SHUPLWWHG ZLWKRXW H[SUHVV ZULWWHQ
LQFOXGLQJULJKWVFUHDWHGE\SDWHQWJUDQWRUUHJLVWUDWLRQRI
&RPPLVVLRQLQJDQG&KHFNV 7HVWRSHUDWLQJEHKDYLRU
6LHPHQV$*
3RZHU*HQHUDWLRQ 0% (;
*DV7XUELQH 0LQRU,QVSHFWLRQ
0DLQWHQDQFH *HQHUDO&RPSRQHQW7HVWLQJ
6ROHQRLG9DOYHV /HDNWLJKWQHVV7HVWVXQGHU2SHUDWLQJ
(QVXUHWKDWYDOYHOLIWLVDFFXUDWHO\LQGLFDWHG &RQGLWLRQV
&KHFNDQ\ORFDORUUHPRWHFRQWUROHTXLSPHQW
'RFXPHQWHGSUHVVXUHDQGOHDNWLJKWQHVVWHVWLQJDUHDO
&KHFNRSHUDWLQJEHKDYLRU
UHDG\ SHUIRUPHG RQ D ODUJH VFDOH DW WKH PDQXIDFWXULQJ
3QHXPDWLFDOO\$FWXDWHG9DOYHV SODQW DV ERWK LQSURFHVV DQG ILQDO WHVWV 6\VWHP GHVLJQ
JURXSVZKLFKIRULQVWDOODWLRQUHDVRQVPXVWEHWHVWHGDWWKH
&KHFNSQHXPDWLFOLQHFRQQHFWLRQV FRQVWUXFWLRQVLWHDUHGRFXPHQWHGLQ5HFRUG
(QVXUHWKDWYDOYHOLIWLVDFFXUDWHO\LQGLFDWHG $ YLVXDO OHDNWLJKWQHVV LQVSHFWLRQ RI WKH V\VWHP DV D
(QVXUHWKDWWKHSURSHURSHQLQJDQGFORVLQJGHYLFHVDUH ZKROHPXVWEHSHUIRUPHGGXULQJLQLWLDOVWDUWXSRIWKH*7
SUHVHQW 7KHWHVWVRXWOLQHGEHORZPXVWEHGRFXPHQWHGLQ5HF
&KHFNOLPLWSRVLWLRQVDJDLQVW/LVWRI6HWWLQJV RUG
&KHFNORFDODQGUHPRWHFRQWUROHTXLSPHQW
&KHFNRSHUDWLQJEHKDYLRU &DXWLRQ
)LUHKD]DUG2QHLQVSHFWRUHTXLSSHGZLWKD
+HDW([FKDQJHUV ILUHH[WLQJXLVKHUPXVWEHSRVWHGRQHDFK
&KHFNPRQLWRULQJHTXLSPHQWDQGLQWHUORFNVIRUSUHV VLGHRIWKHULQJFRPEXVWRUZKHQSHUIRUPLQJ
VXUHILOOOHYHODQGWHPSHUDWXUH OHDNWLJKQHVVFKHFNVLQWKHDUHDRIWKHULQJ
&KHFNKHDWH[FKDQJHUXQGHURSHUDWLQJFRQGLWLRQV FRPEXVWRU7KLVHQVXUHVWKDWDQ\ILUHV
YHQWLQJOHDNWLJKWQHVVSUHVVXUHILOOOHYHODQGWHP FDXVHGE\WKHKRW*7LJQLWLQJOHDNLQJIXHO
SHUDWXUH FDQEHH[WLQJXLVKHGLPPHGLDWHO\
7KH UHSURGXFWLRQ WUDQVPLVVLRQ RU XVH RI WKLV GRFXPHQW
DXWKRULW\2IIHQGHUVZLOOEHOLDEOHIRUGDPDJHV$OOULJKWV
RU LWV FRQWHQW LV QRW SHUPLWWHG ZLWKRXW H[SUHVV ZULWWHQ
LQFOXGLQJULJKWVFUHDWHGE\SDWHQWJUDQWRUUHJLVWUDWLRQRI
)LOWHUV 9LVXDO/HDNWLJKWQHVV7HVWVRIWKH&RPSOHWHG)XHO
&KHFNLQVWUXPHQWDWLRQGLIIHUHQWLDOSUHVVXUHILOOOHYHO 6XSSO\6\VWHP
GLVSOD\V 7KHVHWHVWVDOVRLQFOXGHWKRVHVHJPHQWVRIWKHV\VWHP
D XWLOLW\ PRGHO RU GHVLJQ DUH UHVHUYHG
&KHFNDSSURSULDWHDODUPVDQGLQWHUORFNV ZKLFK FRXOG QRW EH WHVWHG GXULQJ LQVWDOODWLRQ GXH WR SURF
&KHFNILOWHUXQLWXQGHURSHUDWLQJFRQGLWLRQVYHQWLQJ HVVFRQVLGHUDWLRQV
OHDNWLJKWQHVVGLIIHUHQWLDOSUHVVXUHILOOOHYHOV 7KH YDULRXV V\VWHPV VHJPHQWV PXVW EH FKHFNHG IRU
&KHFNILOWHUFKDQJHRYHUXQGHURSHUDWLQJFRQGLWLRQV OHDNWLJKWQHVV XQGHU D YDULHW\ RI RSHUDWLQJ FRQGLWLRQV WR
HQVXUH WKDW WKH VHJPHQWV FDQ EH VXIILFLHQWO\ SUHVVXUL]HG
,QVSHFWLRQRI*7IRU&OHDQQHVV3ULRUWR 5HIHUWRWKHGHVFULSWLRQVRIWKHWHVWVWKHPVHOYHVIRUPRUH
&ORVLQJWKH0DQKROHV GHWDLOV
EHGHWHUPLQHGDQGFDQQRWUHSODFHOHDN
UHPRYHG LQ WKH FRXUVH RI LQVSHFWLRQV RU RWKHU ZRUN SHU WLJKWQHVVWHVWVDWUDWHGVSHHG
IRUPHG GXULQJ RXWDJHV DQ\ FKHFNV VSHFLILHG IRU WKHVH
DUHDVPXVWEHUHSHDWHG
6LHPHQV$*
3RZHU*HQHUDWLRQ 0% (;
*DV7XUELQH 0LQRU,QVSHFWLRQ
0DLQWHQDQFH *HQHUDO&RPSRQHQW7HVWLQJ
/HDNWLJKWQHVV7HVWLQJRIWKH1DWXUDO*DV6\VWHPDW IURPWKHIODQJHFRQQHFWLRQGRZQVWUHDPRIWKH)2
5DWHG6SHHG GLIIXVLRQEXUQHU(69GRZQVWUHDPWRWKHFRQQHFWLRQRQ
2QFH WKH QDWXUDO JDV (69 LV RSHQHG YLVXDO OHDNWLJKW WKH'%EXUQHU
QHVV WHVW RI WKH IROORZLQJ V\VWHP VHJPHQW EHJLQV DQG IURPWKHFRQQHFWLRQRQWKH)2EXUQHUGRZQVWUHDPWR
FRQWLQXHV XQWLO EDVH ORDG RSHUDWLRQ IXOO SUHVVXUL]DWLRQ LV WKHIODQJHFRQQHFWLRQXSVWUHDPRIWKHUHWXUQOLQH(69
EHJXQ
IURPWKHIODQJHFRQQHFWLRQGRZQVWUHDPRIWKHGLIIXVLRQ 2QFHWKHIXHORLOSUHPL[EXUQHU(69LVRSHQHGDWDS
FRQWUROYDOYHGRZQVWUHDPWRWKHQDWXUDOJDVFRQQHFWLRQ SUR[EDVHORDGDYLVXDOOHDNWLJKWQHVVFKHFNRIWKH
RQWKHGLIIXVLRQEXUQHU IROORZLQJV\VWHPVHJPHQWEHJLQVDQGFRQWLQXHVXQWLOEDVH
ORDGRSHUDWLRQIXOOSUHVVXUL]DWLRQLVEHJXQ
7KH IROORZLQJ YLVXDO OHDNWLJKWQHVV FKHFN PXVW EH SHU 6XSSO\OLQHWRWKHSUHPL[EXUQHU
IRUPHGDIWHUFKDQJLQJRYHUIURPGLIIXVLRQWRSUHPL[PRGH IURPWKHIODQJHFRQQHFWLRQGRZQVWUHDPRIWKH)2SUH
JDVOLQHVIRUWKHSUHPL[DQGSLORWJDVEXUQHUVEHJLQ PL[EXUQHU(69GRZQVWUHDPWRWKHFRQQHFWLRQRQWKH
QLQJDWWKHUHVSHFWLYHIODQJHGRZQVWUHDPRIWKHSUHPL[ SUHPL[EXUQHU
DQGSLORWJDVFRQWUROYDOYHVGRZQVWUHDPWRWKHUHVSHF /HDNWLJKWQHVV7HVWLQJRIWKH,JQLWLRQ*DV6\VWHP
WLYHFRQQHFWLRQRQWKHQDWXUDOJDVEXUQHU 'XULQJ2SHUDWLRQZLWKWKH6WDUWXS&RQYHUWHU
/HDNWLJKWQHVV7HVWLQJRIWKH)XHO2LO6\VWHPDW5DWHG
7KHLJQLWLRQJDVV\VWHPLVVWDUWHGIRUWKHILUVWWLPHZKLOH
6SHHG
WKH*7LVEHLQJDFFHOHUDWHGE\WKHVWDUWXSFRQYHUWHUGXULQJ
2QFH WKH QDWXUDO JDV (69 LV RSHQHG D YLVXDO OHDN VWDUWXSFRQYHUWHUFRPPLVVLRQLQJ
WLJKWQHVV FKHFN RI WKH IROORZLQJ V\VWHP VHJPHQW EHJLQV $ YLVXDO OHDNWLJKWQHVV FKHFN RI WKH IROORZLQJ V\VWHP
7KH UHSURGXFWLRQ WUDQVPLVVLRQ RU XVH RI WKLV GRFXPHQW
DXWKRULW\2IIHQGHUVZLOOEHOLDEOHIRUGDPDJHV$OOULJKWV
RU LWV FRQWHQW LV QRW SHUPLWWHG ZLWKRXW H[SUHVV ZULWWHQ
LQFOXGLQJULJKWVFUHDWHGE\SDWHQWJUDQWRUUHJLVWUDWLRQRI
6LHPHQV$*
3RZHU*HQHUDWLRQ 0% (;
Gas Turbine General User Information
Spare Parts Table of Contents
Siemens AG 3.6.1-00010-0592/ 1
Power Generation 0306E
Gas Turbine General User Information
Spare Parts Table of Contents
Siemens AG 3.6.1-00010-0592/ 2
Power Generation 0306E
Gas Turbine General User Information
Spare Parts Table of Contents
Siemens AG 3.6.1-00010-0592/ 3
Power Generation 0306E
Gas Turbine User Information
Spare Parts Notes on Using the Spare Parts Catalog
Preliminary Remarks The functional unit number can be found in the Spare
Parts Catalog as a contents code, for example:
A few brief remarks are necessary for understanding in the document number of the Spare Parts List
the structure of both the catalog and the gas turbine 3.6.2-20310-0342
product. in the document number of the detail drawings
3.6-73501-009674/1
The gas turbine is subdivided into main components.
All documents in the Section Spare Parts List and
Not every gas turbine includes all main components. Its
Spare Parts Drawings are sorted by functional unit number.
main components are:
The functional units of a single main component are
shown in the drawings of the Overview of Functional Units.
Main Component Designation
The functional unit is normally assigned the same first digit
20000 Compressor and Turbine in the overview drawing (e.g., 71602 is listed in Overview of
30000 Combustion chamber (silo-type) Functional Units 3.6.1-70000-800342).
50000 Lube Oil System
60000 Piping racks All figures, remarks, tables, and examples are intended
solely to facilitate use of the Spare Parts Catalog. The data
70000 Control and fuel supply system
listed in this description are not necessarily relevant to the
80000 Exhaust system and line of shafting gas turbine described in the SP Catalog.
rights created by patent grant or registration of a utility
content is not permitted without express written authority.
The reproduction, transmission or use of this document or its
Each of these main components comprises individual Using the Spare Parts Catalog
functional units. Each functional unit is identified by a 5-
digit number (component). The Spare Parts Catalog is used for two primary
purposes:
A functional unit can comprise parts and assemblies
Determining the Order Number for spare parts
that are described in greater detail by Item Positions.
and
model or design, are reserved.
Siemens AG 3.6.1-00355-0001/1
Power Generation 0305E-X
Gas Turbine User Information
Spare Parts Notes on Using the Spare Parts Catalog
3.6.1-20000-800287
Fig. 2: Overview of Functional Units
With the aid of the functional unit
model or design, are reserved.
3.6.2-20310-0287/01
Class: RESTRICTED
Siemens AG 3.6.1-00355-0001/2
Power Generation 0305E-X
Gas Turbine User Information
Spare Parts Notes on Using the Spare Parts Catalog
20310.0119. (Fig. 6)
3.6-20310-011778/1
If you need to determine where the
Fig. 6: Detail Drawing
functional unit is installed in the overview
of gas turbine functional units, proceed
Title Overview of Drawing List as follows:
Functional Units
Oil seal ring 3.6.1-20000-800287 3.6-16140-047224 3.6.2-16140-0287
Rotor 3.6.1-20000-800287 3.6-20310-011778 3.6.2-20310-0287 Locate the line in the column
Jacking oil 3.6.1-50000-800287 3.6-51120-034988 3.6.2-51120-0287 Drawing of the Reference Table
pump with the corresponding document
Fig. 7: Reference Table 3.6.1-00400-... number, in this example:
3.6-20310-011778. (Fig. 7)
Locate the valid overview drawing in
this line, in this example:
20310 3.6.1-20000-800287.
(Fig. 7)
Siemens AG 3.6.1-00355-0001/3
Power Generation 0305E-X
Gas Turbine User Information
Spare Parts Notes on Using the Spare Parts Catalog
example: 71603.0001.0002.0006, to
determine where the spare part is
71603.0001.0002.0006 installed in the respective functional
unit.
Siemens AG 3.6.1-00355-0001/4
Power Generation 0305E-X
Gas Turbine User Information
Spare Parts Notes on Using the Spare Parts Catalog
Details of the Spare Parts List Specifically, these data comprise the Functional Unit
Number (1st column), the Functional Unit Designation (2nd
In addition to an explanation of the table, the header column), the number of times this functional unit is installed
(gray shading in Fig. 14) contains information on the in/on the GT (3rd column) and the WB Item ID (6th
complete functional unit (in bold type). column).
1 2 3 4 5 6 7
Order No. Item Position Installed Unit REK Item ID Change
Name Qty. WB Item ID
Characteristics TIN (Quantity
Weight ordered)
Net
per unit
20310 Rotor 1 PB0000122013
800342-20310 20310 1 PC Z A2A50198334 -
Rotor PB0000122013
86,154 KG H13F02K79
800342-20310-00009 20310.0010 1.0 PC U A2A50149637 -
rights created by patent grant or registration of a utility
content is not permitted without express written authority.
The reproduction, transmission or use of this document or its
0.15 KG -
800342-20310-00141 20310.0119.0006 47 PC T A2A50145027 -
Seal strip PB0000043975
0.05 KG H13F04F79
800342-20310-00142 20310.0119.0007 47 PC T A2A50187139 -
Assembly of seal strip with locking strip PB0000169702
0.51 KG -
800342-20310-00147 20310.0119.0012 47 PC T A2A50183429 -
Locking strip PB0000158392
0.03 KG -
800342-20310-00152 20310.0126 1.0 PC U A2A50029884 -
Tie bolt nut PB0000028042
149.0 KG H11G41J37
Fig. 14: Example of a Spare Parts List
Column 1
1st Line = Order No. This order number refers to the installation
This number comprises the six-digit machine no., the five- location of the spare part in the gas turbine and
digit functional unit no., and a five-digit content code. The absolutely must be stated when ordering.
individual numbers are separated by a dash. Technical review of the order is otherwise
The order number for the locking strip stated in Fig. impossible, i.e., it is impossible to determine
14, for example, is 800342-20310-00147. whether it reflects the current technical status!
Siemens AG 3.6.1-00355-0001/5
Power Generation 0305E-X
Gas Turbine User Information
Spare Parts Notes on Using the Spare Parts Catalog
Column 3
Column 2
1st Line = Quantity installed
1st Line = Item Position Number of times this part is installed in/on one gas
To clearly indicate the relationship between entries in turbine.
the SP List and the SP itself, the Item Position is given in
Caution: If the functional unit is installed in/on the GT
both.
more than once (cf. column heading), the total number is
These identifiers comprise the five-digit functional unit stated here. If the functional unit designation is burner
number followed by either zero or several four-digit item assembly, for example, of which 24 are installed, each
numbers-with each item number preceded by a period. equipped with 2 spark electrodes, 48 is stated as the
The Item Position for the locking strip stated in Fig. Quantity Installed.
14, for example, is 20310.0119.0012.
3rd Line = Net weight per item
Net weight of one item of the spare unit.
Spare parts can be ordered as separate items or
as subassemblies. The relationship of parts to Column 4
each other is evident from the hierarchical
structure of components and thus the associated 1st and 3rd Lines = Unit
Item Positions shown in the Spare Parts List. This column indicates the units in which the quantities
and weights stated in Column 3 are expressed.
rights created by patent grant or registration of a utility
content is not permitted without express written authority.
The reproduction, transmission or use of this document or its
Column 5
Siemens AG 3.6.1-00355-0001/6
Power Generation 0305E-X
Gas Turbine User Information
Spare Parts Notes on Using the Spare Parts Catalog
GT which could not be reflected in the respective issue of turbine/compressor that are not necessarily required
the SP Catalog. during major inspections or similar activities.
A revision code poses no hindrance to placing an R: Non-high-grade assembly and wear parts of the
order. The currently correct spare part will be turbine/compressor that are required during major
determined at Siemens during the technical inspections or similar activities.
review of the order. S: Compressor and turbine vanes and blades as
model or design, are reserved.
Siemens AG 3.6.1-00355-0001/7
Power Generation 0305E-X
Gas Turbine User Information
Spare Parts Notes on Using the Spare Parts Catalog
Tips Regarding Inquiries and Orders Plant designation (Siemens project name), machine
number (stamped on the rating plate of the GT).
When ordering or inquiring about spare parts, several
Number of packages required for inspection, major
different elements of information are required, depending
inspection or high-availability. If no number is stated, it
on whether you need individual spare parts or spare parts
will be assumed that only one gas turbine is involved.
packages:
Siemens AG 3.6.1-00355-0001/8
Power Generation 0305E-X
Gas Turbine General User Information
Spare Parts Reference Table (ordered by Functional Unit No.)
Siemens AG 3.6.1-00400-0592/ 1
Power Generation 0306E
Gas Turbine General User Information
Spare Parts Reference Table (ordered by Functional Unit No.)
Siemens AG 3.6.1-00400-0592/ 2
Power Generation 0306E
Gas Turbine General User Information
Spare Parts Reference Table (ordered by Functional Unit No.)
Class: RESTRICTED
Siemens AG 3.6.1-00400-0592/ 3
Power Generation 0306E
Gas Turbine General User Information
Spare Parts Reference Table (ordered alphabetically)
Siemens AG 3.6.1-00401-0592/ 1
Power Generation 0306E
Gas Turbine General User Information
Spare Parts Reference Table (ordered alphabetically)
Siemens AG 3.6.1-00401-0592/ 2
Power Generation 0306E
Gas Turbine General User Information
Spare Parts Reference Table (ordered alphabetically)
Class: RESTRICTED
Siemens AG 3.6.1-00401-0592/ 3
Power Generation 0306E
Gas Turbine Spare Parts List
Spare Parts Casing 3
Class: RESTRICTED
Siemens AG 3.6.2-20103-0592/ 01
Power Generation Page: 1/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Casing 2 Assembly
Siemens AG 3.6.2-20112-0592/ 01
Power Generation Page: 2/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Casing 2 Assembly
Siemens AG 3.6.2-20112-0592/ 02
Power Generation Page: 3/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Casing 3 Assembly
Siemens AG 3.6.2-20113-0592/ 01
Power Generation Page: 4/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Casing 3 Assembly
Siemens AG 3.6.2-20113-0592/ 02
Power Generation Page: 5/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Rotor
Siemens AG 3.6.2-20310-0592/ 01
Power Generation Page: 6/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Rotor
Siemens AG 3.6.2-20310-0592/ 02
Power Generation Page: 7/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Rotor
Siemens AG 3.6.2-20310-0592/ 03
Power Generation Page: 8/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Rotor
Siemens AG 3.6.2-20310-0592/ 04
Power Generation Page: 9/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Rotor
Siemens AG 3.6.2-20310-0592/ 05
Power Generation Page: 10/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Rotor
Siemens AG 3.6.2-20310-0592/ 06
Power Generation Page: 11/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Rotor Cover
Siemens AG 3.6.2-20340-0592/ 01
Power Generation Page: 12/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Rotor Cover
Siemens AG 3.6.2-20340-0592/ 02
Power Generation Page: 13/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Rotor Cover
Siemens AG 3.6.2-20340-0592/ 03
Power Generation Page: 14/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Rotor Cover
Class: RESTRICTED
Siemens AG 3.6.2-20340-0592/ 04
Power Generation Page: 15/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Bearing Casing, Compressor
Siemens AG 3.6.2-20500-0592/ 01
Power Generation Page: 16/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Bearing Casing, Compressor
Siemens AG 3.6.2-20500-0592/ 02
Power Generation Page: 17/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Bearing Casing, Compressor
Siemens AG 3.6.2-20500-0592/ 03
Power Generation Page: 18/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Bearing Casing, Compressor
Siemens AG 3.6.2-20500-0592/ 04
Power Generation Page: 19/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Instrumentation Compressor Bearing
Class: RESTRICTED
Siemens AG 3.6.2-20510-0592/ 01
Power Generation Page: 20/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Bearing Casing Compressor, Assembly
Siemens AG 3.6.2-20550-0592/ 01
Power Generation Page: 21/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Bearing Casing Compressor, Assembly
Siemens AG 3.6.2-20550-0592/ 02
Power Generation Page: 22/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Bearing Casing Compressor, Assembly
Class: RESTRICTED
Siemens AG 3.6.2-20550-0592/ 03
Power Generation Page: 23/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Bearing Casing, Turbine
Siemens AG 3.6.2-20600-0592/ 01
Power Generation Page: 24/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Bearing Casing, Turbine
Siemens AG 3.6.2-20600-0592/ 02
Power Generation Page: 25/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Bearing Casing, Turbine
Siemens AG 3.6.2-20600-0592/ 03
Power Generation Page: 26/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Instrumentation Turbine Bearing
Class: RESTRICTED
Siemens AG 3.6.2-20610-0592/ 01
Power Generation Page: 27/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Bearing Casing Turbine, Assembly
Siemens AG 3.6.2-20650-0592/ 01
Power Generation Page: 28/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Bearing Casing Turbine, Assembly
Siemens AG 3.6.2-20650-0592/ 02
Power Generation Page: 29/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Bearing Casing Turbine, Assembly
Siemens AG 3.6.2-20650-0592/ 03
Power Generation Page: 30/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Bearing Casing Turbine, Assembly
Class: RESTRICTED
Siemens AG 3.6.2-20650-0592/ 04
Power Generation Page: 31/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Guide Vane Ring, Assembly
Siemens AG 3.6.2-21000-0592/ 01
Power Generation Page: 32/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Guide Vane Ring, Assembly
Siemens AG 3.6.2-21000-0592/ 02
Power Generation Page: 33/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Guide Vane Ring, Assembly
Siemens AG 3.6.2-21000-0592/ 03
Power Generation Page: 34/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Compressor Stator 1
Siemens AG 3.6.2-21100-0592/ 01
Power Generation Page: 35/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Compressor Stator 1
Siemens AG 3.6.2-21100-0592/ 02
Power Generation Page: 36/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Compressor Stator 1
Siemens AG 3.6.2-21100-0592/ 03
Power Generation Page: 37/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Compressor Stator 1
Siemens AG 3.6.2-21100-0592/ 04
Power Generation Page: 38/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Compressor Stator 1
Siemens AG 3.6.2-21100-0592/ 05
Power Generation Page: 39/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Compressor Stator 1, Assembly
Siemens AG 3.6.2-21110-0592/ 01
Power Generation Page: 40/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Compressor Stator 1, Assembly
Siemens AG 3.6.2-21110-0592/ 02
Power Generation Page: 41/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Compressor Stator 1, Assembly
Class: RESTRICTED
Siemens AG 3.6.2-21110-0592/ 03
Power Generation Page: 42/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Compressor Stator 2
Siemens AG 3.6.2-21201-0592/ 01
Power Generation Page: 43/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Compressor Stator 2
Siemens AG 3.6.2-21201-0592/ 02
Power Generation Page: 44/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Compressor Stator 2
Siemens AG 3.6.2-21201-0592/ 03
Power Generation Page: 45/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Compressor Stator 2
Siemens AG 3.6.2-21201-0592/ 04
Power Generation Page: 46/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Compressor Stator 2, Assembly
Siemens AG 3.6.2-21210-0592/ 01
Power Generation Page: 47/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Compressor Stator 2, Assembly
Siemens AG 3.6.2-21210-0592/ 02
Power Generation Page: 48/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Position Transmitter, Guide Vane
Class: RESTRICTED
Siemens AG 3.6.2-21400-0592/ 01
Power Generation Page: 49/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Turbine Stator
Siemens AG 3.6.2-22000-0592/ 01
Power Generation Page: 50/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Turbine Stator
Siemens AG 3.6.2-22000-0592/ 02
Power Generation Page: 51/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Turbine Stator
Siemens AG 3.6.2-22000-0592/ 03
Power Generation Page: 52/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Turbine Stator
Siemens AG 3.6.2-22000-0592/ 04
Power Generation Page: 53/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Turbine Stator
Siemens AG 3.6.2-22000-0592/ 05
Power Generation Page: 54/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Turbine Stator, Assembly
Siemens AG 3.6.2-22010-0592/ 01
Power Generation Page: 55/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Turbine Stator, Assembly
Siemens AG 3.6.2-22010-0592/ 02
Power Generation Page: 56/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Annular CC, Assembly
Siemens AG 3.6.2-23010-0592/ 01
Power Generation Page: 57/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Annular CC, Assembly
Siemens AG 3.6.2-23010-0592/ 02
Power Generation Page: 58/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Annular CC, Assembly
Siemens AG 3.6.2-23010-0592/ 03
Power Generation Page: 59/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Outer Shell Assembly, UP
Siemens AG 3.6.2-23101-0592/ 01
Power Generation Page: 60/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Outer Shell Assembly, UP
Siemens AG 3.6.2-23101-0592/ 02
Power Generation Page: 61/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Outer Shell Assembly, UP
Siemens AG 3.6.2-23101-0592/ 03
Power Generation Page: 62/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Outer Shell Assembly, UP
Class: RESTRICTED
Siemens AG 3.6.2-23101-0592/ 04
Power Generation Page: 63/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Outer Shell Assembly, LP
Siemens AG 3.6.2-23102-0592/ 01
Power Generation Page: 64/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Outer Shell Assembly, LP
Siemens AG 3.6.2-23102-0592/ 02
Power Generation Page: 65/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Outer Shell Assembly, LP
Siemens AG 3.6.2-23102-0592/ 03
Power Generation Page: 66/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Combustion Chamber Vibration Pick-up
Class: RESTRICTED
Siemens AG 3.6.2-23130-0592/ 01
Power Generation Page: 67/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Burner Assembly
Siemens AG 3.6.2-23200-0592/ 01
Power Generation Page: 68/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Burner Assembly
Siemens AG 3.6.2-23200-0592/ 02
Power Generation Page: 69/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Burner Assembly
Siemens AG 3.6.2-23200-0592/ 03
Power Generation Page: 70/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Diagonal Swirler
Siemens AG 3.6.2-23210-0592/ 01
Power Generation Page: 71/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Diagonal Swirler
Class: RESTRICTED
Siemens AG 3.6.2-23210-0592/ 02
Power Generation Page: 72/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Control Block Turning Gear
Siemens AG 3.6.2-51270-0592/ 01
Power Generation Page: 73/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Guide Vane Adjustment Assembly
Siemens AG 3.6.2-71501-0592/ 01
Power Generation Page: 74/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Blow Off Valves
Siemens AG 3.6.2-71602-0592/ 01
Power Generation Page: 75/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Blow Off Valves
Class: RESTRICTED
Siemens AG 3.6.2-71602-0592/ 02
Power Generation Page: 76/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Actuator, Guide Vanes
Class: RESTRICTED
Siemens AG 3.6.2-71603-0592/ 01
Power Generation Page: 77/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Temperature Measuring Points at Turbine
Class: RESTRICTED
Siemens AG 3.6.2-71653-0592/ 01
Power Generation Page: 78/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Blow Off Line
Siemens AG 3.6.2-71658-0592/ 01
Power Generation Page: 79/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Instrumentation Turbine Bearing
Class: RESTRICTED
Siemens AG 3.6.2-72151-0592/ 01
Power Generation Page: 80/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Instrumentation Compressor Bearing
Siemens AG 3.6.2-72152-0592/ 01
Power Generation Page: 81/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Control Valves, Cooling Air
Siemens AG 3.6.2-72603-0592/ 01
Power Generation Page: 82/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Extraction Air Piping
Siemens AG 3.6.2-72656-0592/ 01
Power Generation Page: 83/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Inspection Tube
Siemens AG 3.6.2-73510-0592/ 01
Power Generation Page: 84/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Seal Air Valve, Fuel Oil, Diffusion
Class: RESTRICTED
Siemens AG 3.6.2-73611-0592/ 01
Power Generation Page: 85/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Seal Air Valve, Fuel Oil, Premix
Class: RESTRICTED
Siemens AG 3.6.2-73612-0592/ 01
Power Generation Page: 86/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Fuel Oil Piping on Combustion Chamber
Siemens AG 3.6.2-73651-0592/ 01
Power Generation Page: 87/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Fuel Gas Piping on Combustion
Chamber
Order No. Item Position Quantity Unit REK Item ID Revision
Description installed WB Item ID
Characteristics TIN (Quantity
Net Weight ordered)
per unit
Siemens AG 3.6.2-73652-0592/ 01
Power Generation Page: 88/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Fuel Oil Diffusion Feed Stop Valve 1
Class: RESTRICTED
Siemens AG 3.6.2-74102-0592/ 01
Power Generation Page: 89/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Fuel Oil Diffusion Return Stop Valve
Class: RESTRICTED
Siemens AG 3.6.2-74103-0592/ 01
Power Generation Page: 90/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Fuel Oil Control Valve 1
Class: RESTRICTED
Siemens AG 3.6.2-74104-0592/ 01
Power Generation Page: 91/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Fuel Oil Premix Stop Valve 1
Class: RESTRICTED
Siemens AG 3.6.2-74106-0592/ 01
Power Generation Page: 92/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Fuel Oil Diffusion Feed Control Valve
Class: RESTRICTED
Siemens AG 3.6.2-74109-0592/ 01
Power Generation Page: 93/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Fuel Oil Premix Feed Control Valve
Class: RESTRICTED
Siemens AG 3.6.2-74110-0592/ 01
Power Generation Page: 94/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Fuel Gas Stop Valve
Siemens AG 3.6.2-74602-0592/ 01
Power Generation Page: 95/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Fuel Gas Diffusion Control Valve
Siemens AG 3.6.2-74603-0592/ 01
Power Generation Page: 96/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Fuel Gas Premix Control Valve
Siemens AG 3.6.2-74604-0592/ 01
Power Generation Page: 97/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Pilot Gas Control Valve
Siemens AG 3.6.2-74605-0592/ 01
Power Generation Page: 98/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Heat Tracing, Fuel Gas Piping
Siemens AG 3.6.2-74657-0592/ 01
Power Generation Page: 99/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Water Stop Valve
Class: RESTRICTED
Siemens AG 3.6.2-75611-0592/ 01
Power Generation Page: 100/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Water Control Valve
Class: RESTRICTED
Siemens AG 3.6.2-75612-0592/ 01
Power Generation Page: 101/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Water Stop Valve
Class: RESTRICTED
Siemens AG 3.6.2-75621-0592/ 01
Power Generation Page: 102/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Water Control Valve
Class: RESTRICTED
Siemens AG 3.6.2-75622-0592/ 01
Power Generation Page: 103/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Exhaust Gas Diffuser
Siemens AG 3.6.2-82100-0592/ 01
Power Generation Page: 104/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Axial Guide
Class: RESTRICTED
Siemens AG 3.6.2-85110-0592/ 01
Power Generation Page: 105/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Turbine Supports
Class: RESTRICTED
Siemens AG 3.6.2-85130-0592/ 01
Power Generation Page: 106/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Compressor Support, Assembly
Class: RESTRICTED
Siemens AG 3.6.2-85152-0592/ 01
Power Generation Page: 107/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Intermediate Shaft
Class: RESTRICTED
Siemens AG 3.6.2-86100-0592/ 01
Power Generation Page: 108/ 109 0306E
Gas Turbine Spare Parts List
Spare Parts Compressor and Generator, Assembly
Class: RESTRICTED
Siemens AG 3.6.2-86110-0592/ 01
Power Generation Page: 109/ 109 0306E
Gas Turbine Parts Usage Tables
Spare Parts WB Item-ID to Item-ID, TIN and Item Position
20650.0024
PB0000000107 A2A50000002 H00A59D30 23200.0001.0025
PB0000000108 A2A50000003 H00A59D48 23200.0001.0023
PB0000000119 A2A50000084 H00A61B95 21000.0018
of a utility model or design, are reserved.
71501.0049
73510.0011
PB0000000121 A2A50000085 H00A61C52 20600.0005.0002.0002
20650.0054
PB0000000156 A2A50000088 H00A70B96 20500.0004.0005
20600.0012.0001
PB0000000160 A2A50000089 H00A71G16 20500.0003.0011
PB0000000161 A2A50000090 H00A71J14 21110.0026
PB0000000179 A2A50005718 H00A79K32 20500.0004.0015
PB0000000193 A2A50000096 H00A88K74 20600.0001.0002.0033
20650.0100.0003.0004
20650.0100.0004.0004
20650.0100.0005.0004
PB0000000194 A2A50005720 H00A90C28 21000.0115
PB0000000224 A2A50005729 H00B09J87 23010.0083
PB0000000337 A2A50005746 H00B45D94 21110.0012
21210.0004
PB0000000348 A2A50005755 H00B47D33 85152.0001.0044
PB0000000384 A2A50000177 H00B73J26 23200.0001.0027
PB0000000385 A2A50000178 H00B73J59 23200.0001.0006.0007
PB0000000388 A2A50000180 H00B73K41 20500.0004.0016
20600.0005.0011
PB0000000399 A2A50000183 H00B74C79 20550.0027
PB0000000400 A2A50005786 H00B74C95 20550.0026
Class: RESTRICTED
Siemens AG 3.6.3-00300-0592
Power Generation Page: 1/ 28 0306E
Gas Turbine Parts Usage Tables
Spare Parts WB Item-ID to Item-ID, TIN and Item Position
23200.0001.0026
permitted without express written authority. Offenders will be liable for
Siemens AG 3.6.3-00300-0592
Power Generation Page: 2/ 28 0306E
Gas Turbine Parts Usage Tables
Spare Parts WB Item-ID to Item-ID, TIN and Item Position
20550.0014
damages. All rights, including rights created by patent grant or registration
20650.0040
permitted without express written authority. Offenders will be liable for
20650.0041
20650.0067
21000.0011
21110.0004.0013
22000.0065
23101.0275
of a utility model or design, are reserved.
23102.0275
71501.0048
73510.0012
82100.0060
PB0000001446 A2A50000381 H11E04D68 20310.0104
20550.0020
20550.0034
20650.0101.0012
21201.0002.0013
22000.0057
PB0000001493 A2A50005996 H11F50D76 20340.0028.0277
23101.0021
23102.0021
PB0000001526 A2A50005998 H11G80K00 20550.0016
PB0000001527 A2A50000395 H11G82B12 21100.0019
21210.0027
PB0000001528 A2A50000396 H11G82B20 21100.0020
21210.0028
PB0000001531 A2A50000397 H11G95C39 20500.0001.0001.0004
20600.0001.0003.0007.0002
22000.0002.0003
PB0000001663 A2A50006093 H11J81K20 21000.0027.0012
PB0000001699 A2A50006098 H11K20K26 20112.0085
20113.0085
20650.0066
PB0000001802 A2A50000419 H12A27K94 71501.0046
PB0000001803 A2A50000420 H12A28A26 71501.0044
Class: RESTRICTED
Siemens AG 3.6.3-00300-0592
Power Generation Page: 3/ 28 0306E
Gas Turbine Parts Usage Tables
Spare Parts WB Item-ID to Item-ID, TIN and Item Position
20113.0025
20113.0030
22000.0002.0005
PB0000004146 A2A50000533 H11G95C21 20500.0001.0001.0005
22000.0002.0004
of a utility model or design, are reserved.
Siemens AG 3.6.3-00300-0592
Power Generation Page: 4/ 28 0306E
Gas Turbine Parts Usage Tables
Spare Parts WB Item-ID to Item-ID, TIN and Item Position
20600.0005.0002.0003
PB0000009618 A2A50001002 H12B71H43 73510.0014
PB0000009619 A2A50001003 H12B74F23 73510.0015
PB0000009678 A2A50001008 H12B79C09 73510.0005
PB0000009679 A2A50001009 H12B79C17 73510.0010
PB0000009680 A2A50001010 H12B79C41 73510.0017
PB0000009690 A2A50024336 H12C75J90 20600.0001.0002.0036
PB0000009701 A2A50001012 H12C90J16 82100.0019
PB0000009720 A2A50007018 H12E01H77 20500.0006.0005.0008
PB0000009724 A2A50007020 H12E31J57 20550.0047
PB0000009881 A2A50007045 H12E93G59 20650.0022
PB0000009899 A2A50007048 H12E94F58 85152.0001.0041
PB0000009908 A2A50001028 H12F03K11 20340.0028.0078.0004
20340.0028.0175.0004
23101.0077.0004
23101.0200.0004
23102.0077.0004
23102.0200.0004
PB0000009919 A2A50007061 H12F26D42 21201.0001.0015
PB0000010069 A2A50007112 H12H30K02 23200.0001.0006.0005
23200.0001.0028
PB0000010076 A2A50001071 H12H60J59 23130.0003
23200.0001.0006.0011
Class: RESTRICTED
Siemens AG 3.6.3-00300-0592
Power Generation Page: 5/ 28 0306E
Gas Turbine Parts Usage Tables
Spare Parts WB Item-ID to Item-ID, TIN and Item Position
21000.0083
PB0000013150 A2A50001332 H00A58E49 21210.0009
PB0000013156 A2A50007432 H00A62C50 23010.0084
Siemens AG 3.6.3-00300-0592
Power Generation Page: 6/ 28 0306E
Gas Turbine Parts Usage Tables
Spare Parts WB Item-ID to Item-ID, TIN and Item Position
Siemens AG 3.6.3-00300-0592
Power Generation Page: 7/ 28 0306E
Gas Turbine Parts Usage Tables
Spare Parts WB Item-ID to Item-ID, TIN and Item Position
23102.0077.0003
damages. All rights, including rights created by patent grant or registration
23102.0200.0003
permitted without express written authority. Offenders will be liable for
Siemens AG 3.6.3-00300-0592
Power Generation Page: 8/ 28 0306E
Gas Turbine Parts Usage Tables
Spare Parts WB Item-ID to Item-ID, TIN and Item Position
Siemens AG 3.6.3-00300-0592
Power Generation Page: 9/ 28 0306E
Gas Turbine Parts Usage Tables
Spare Parts WB Item-ID to Item-ID, TIN and Item Position
20610.0050
72152.0051
PB0000045017 A2A50146397 H13F30D92 72151.0051
72152.0052
PB0000045493 A2A50146740 H13F28A81 73652.0002.0141
PB0000045514 A2A50146760 H13E84K96 21000.0027.0010
PB0000045609 A2A50146844 H13E61E40 20650.0101.0011
PB0000045610 A2A50146845 H13E61E73 20600.0001.0003.0013.0002
20600.0001.0003.0014.0002
PB0000045611 A2A50146846 H13E61H47 20650.0101.0016
PB0000045619 A2A50146851 H13F22D57 21000.0012
PB0000045620 A2A50146852 H13F00A31 20650.0101.0032
PB0000045885 A2A50147028 H13E02G00 21201.0001.0011
PB0000045886 A2A50147029 H13E02G18 21100.0015
PB0000046217 A2A50149162 H13C90K14 85110.0002
PB0000046475 A2A50149679 H13F28G02 73651.0002.0443
73651.0002.0447
73652.0002.0341
PB0000046583 A2A50010188 H12B66A16 22000.0040
PB0000047343 A2A50150433 H13F03J29 85110.0004
PB0000047364 A2A50150452 H13F04D06 85130.0002
PB0000047367 A2A50150455 H13E95B90 85130.0005
PB0000047371 A2A50150459 H13F04A74 85130.0003
Class: RESTRICTED
Siemens AG 3.6.3-00300-0592
Power Generation Page: 10/ 28 0306E
Gas Turbine Parts Usage Tables
Spare Parts WB Item-ID to Item-ID, TIN and Item Position
22010.0004
damages. All rights, including rights created by patent grant or registration
permitted without express written authority. Offenders will be liable for
Siemens AG 3.6.3-00300-0592
Power Generation Page: 11/ 28 0306E
Gas Turbine Parts Usage Tables
Spare Parts WB Item-ID to Item-ID, TIN and Item Position
74603.0002.1010.0031
74604.0002.1010.0031
74605.0002.1010.0031
PB0000135753 A2A50179491 - 21100.0017
PB0000135758 A2A50185438 - 21201.0001.0012
of a utility model or design, are reserved.
Siemens AG 3.6.3-00300-0592
Power Generation Page: 12/ 28 0306E
Gas Turbine Parts Usage Tables
Spare Parts WB Item-ID to Item-ID, TIN and Item Position
Siemens AG 3.6.3-00300-0592
Power Generation Page: 13/ 28 0306E
Gas Turbine Parts Usage Tables
Spare Parts WB Item-ID to Item-ID, TIN and Item Position
Siemens AG 3.6.3-00300-0592
Power Generation Page: 14/ 28 0306E
Gas Turbine Parts Usage Tables
Spare Parts WB Item-ID to Item-ID, TIN and Item Position
Siemens AG 3.6.3-00300-0592
Power Generation Page: 15/ 28 0306E
Gas Turbine Parts Usage Tables
Spare Parts WB Item-ID to Item-ID, TIN and Item Position
20610.0020
permitted without express written authority. Offenders will be liable for
Siemens AG 3.6.3-00300-0592
Power Generation Page: 16/ 28 0306E
Gas Turbine Parts Usage Tables
Spare Parts WB Item-ID to Item-ID, TIN and Item Position
Siemens AG 3.6.3-00300-0592
Power Generation Page: 17/ 28 0306E
Gas Turbine Parts Usage Tables
Spare Parts WB Item-ID to Item-ID, TIN and Item Position
74604.0002.1030
permitted without express written authority. Offenders will be liable for
Siemens AG 3.6.3-00300-0592
Power Generation Page: 18/ 28 0306E
Gas Turbine Parts Usage Tables
Spare Parts WB Item-ID to Item-ID, TIN and Item Position
22010.0036
permitted without express written authority. Offenders will be liable for
23010.0009
23010.0048
73652.0002.0147
PB0000205658 A2A50203618 - 20112.0132
20113.0196
71658.0012
of a utility model or design, are reserved.
72656.0011
82100.0082
PB0000205659 A2A50205970 - 20340.0029
20650.0042
21210.0018
22010.0011
71658.0010
73652.0002.0142
PB0000205694 A2A50211527 - 23101.0030
23102.0030
PB0000205695 A2A50211528 - 23101.0031
23102.0031
PB0000205696 A2A50211529 - 23101.0032
23102.0032
PB0000205697 A2A50211530 - 23101.0033
23102.0033
PB0000205716 A2A50203453 - 20113.0272
21110.0033
22010.0030
23010.0139
71658.0011
72656.0010
73651.0002.0442
73651.0002.0448
73652.0002.0342
85110.0003
PB0000206456 A2A50211531 - 20340.0028.0032
PB0000206457 A2A50211532 - 20340.0028.0030
Class: RESTRICTED
Siemens AG 3.6.3-00300-0592
Power Generation Page: 19/ 28 0306E
Gas Turbine Parts Usage Tables
Spare Parts WB Item-ID to Item-ID, TIN and Item Position
Siemens AG 3.6.3-00300-0592
Power Generation Page: 20/ 28 0306E
Gas Turbine Parts Usage Tables
Spare Parts WB Item-ID to Item-ID, TIN and Item Position
74103.0001.0022
permitted without express written authority. Offenders will be liable for
74106.0001.0022
PB0000239740 A2A50252939 - 74102.0001.0023
74103.0001.0023
74106.0001.0023
PB0000239741 A2A50252940 - 74102.0001.0024
of a utility model or design, are reserved.
74103.0001.0024
74106.0001.0024
PB0000239762 A2A50252941 - 74104.0001.0021
74109.0001.0021
74110.0001.0021
PB0000239763 A2A50252942 - 74102.0001.0021
74103.0001.0021
74106.0001.0021
PB0000240571 A2A50248257 - 20310.0111.0010
PB0000240776 A2A50270831 - 22000.0033.0001.0001
PB0000240777 A2A50270832 - 22000.0033.0001.0010
PB0000240778 A2A50270833 - 22000.0033.0002.0001
PB0000240779 A2A50270834 - 22000.0033.0002.0010
PB0000240939 A2A50239208 H13D93D12 23200.0003
PB0000241675 A2A50237929 - 71658.0033
PB0000242237 A2A50242080 - 71603.0001.0002.0021.0212
PB0000243403 A2A50241263 - 22000.0061
PB0000243404 A2A50241264 - 22000.0064
PB0000243490 A2A50241276 - 20112.0134
71658.0032
82100.0084
PB0000243491 A2A50241277 - 71658.0030
PB0000243524 A2A50249031 - 20500.0006.0014
PB0000245367 A2A50252951 - 74602.0001.0021
Class: RESTRICTED
74604.0001.0021
PB0000245373 A2A50252955 - 74605.0001.0021
PB0000245390 A2A50252957 - 74605.0001.0024
Siemens AG 3.6.3-00300-0592
Power Generation Page: 21/ 28 0306E
Gas Turbine Parts Usage Tables
Spare Parts WB Item-ID to Item-ID, TIN and Item Position
Siemens AG 3.6.3-00300-0592
Power Generation Page: 22/ 28 0306E
Gas Turbine Parts Usage Tables
Spare Parts WB Item-ID to Item-ID, TIN and Item Position
72603.0002.0001.0030.0304
72603.0010.0001.0030.0304
PB0000268274 A2A50266824 - 72603.0002
Siemens AG 3.6.3-00300-0592
Power Generation Page: 23/ 28 0306E
Gas Turbine Parts Usage Tables
Spare Parts WB Item-ID to Item-ID, TIN and Item Position
Siemens AG 3.6.3-00300-0592
Power Generation Page: 24/ 28 0306E
Gas Turbine Parts Usage Tables
Spare Parts WB Item-ID to Item-ID, TIN and Item Position
Siemens AG 3.6.3-00300-0592
Power Generation Page: 25/ 28 0306E
Gas Turbine Parts Usage Tables
Spare Parts WB Item-ID to Item-ID, TIN and Item Position
Siemens AG 3.6.3-00300-0592
Power Generation Page: 26/ 28 0306E
Gas Turbine Parts Usage Tables
Spare Parts WB Item-ID to Item-ID, TIN and Item Position
74603.0002.1050
74604.0002.1050
PG0030149000 A2A50308705 - 20500.0006
Siemens AG 3.6.3-00300-0592
Power Generation Page: 27/ 28 0306E
Gas Turbine Parts Usage Tables
Spare Parts WB Item-ID to Item-ID, TIN and Item Position
Siemens AG 3.6.3-00300-0592
Power Generation Page: 28/ 28 0306E
Gas Turbine Parts Usage Tables
Spare Parts Item-ID to WB Item-ID, TIN and Item Position
71501.0049
73510.0011
A2A50000085 PB0000000121 H00A61C52 20600.0005.0002.0002
20650.0054
A2A50000088 PB0000000156 H00A70B96 20500.0004.0005
20600.0012.0001
A2A50000089 PB0000000160 H00A71G16 20500.0003.0011
A2A50000090 PB0000000161 H00A71J14 21110.0026
A2A50000096 PB0000000193 H00A88K74 20600.0001.0002.0033
20650.0100.0003.0004
20650.0100.0004.0004
20650.0100.0005.0004
A2A50000177 PB0000000384 H00B73J26 23200.0001.0027
A2A50000178 PB0000000385 H00B73J59 23200.0001.0006.0007
A2A50000180 PB0000000388 H00B73K41 20500.0004.0016
20600.0005.0011
A2A50000183 PB0000000399 H00B74C79 20550.0027
A2A50000184 PB0000000401 H00B74D03 20550.0013
A2A50000186 PB0000000405 H00B74E28 73510.0008
A2A50000193 PB0000000419 H00B74J65 20500.0003.0010
20500.0006.0001.0022
A2A50000194 PB0000000421 H00B74K15 20500.0005.0010
20500.0007.0005
A2A50000197 PB0000000429 H00B75E17 21110.0025
Class: RESTRICTED
Siemens AG 3.6.3-00301-0592
Power Generation Page: 1/ 28 0306E
Gas Turbine Parts Usage Tables
Spare Parts Item-ID to WB Item-ID, TIN and Item Position
73510.0012
permitted without express written authority. Offenders will be liable for
82100.0060
A2A50000381 PB0000001446 H11E04D68 20310.0104
20550.0020
20550.0034
20650.0101.0012
21201.0002.0013
of a utility model or design, are reserved.
22000.0057
A2A50000395 PB0000001527 H11G82B12 21100.0019
21210.0027
A2A50000396 PB0000001528 H11G82B20 21100.0020
21210.0028
A2A50000397 PB0000001531 H11G95C39 20500.0001.0001.0004
20600.0001.0003.0007.0002
22000.0002.0003
A2A50000419 PB0000001802 H12A27K94 71501.0046
A2A50000420 PB0000001803 H12A28A26 71501.0044
A2A50000431 PB0000002063 H12B74G30 20550.0019
A2A50000434 PB0000002158 H12C74H86 20550.0012
20550.0031
A2A50000533 PB0000004146 H11G95C21 20500.0001.0001.0005
22000.0002.0004
A2A50000657 PB0000006938 H10H23A65 21000.0022
A2A50000755 PB0000007803 H12A50K96 20600.0005.0009
A2A50000757 PB0000007858 H00B74C87 21000.0016
A2A50000809 PB0000008274 H00B81A19 20500.0006.0008
A2A50000876 PB0000008968 H11K14C91 21000.0071
A2A50000878 PB0000009079 H00A67F49 73510.0009
A2A50000894 PB0000009138 H00B74A14 20600.0001.0002.0031.0003
A2A50000916 PB0000009273 H10H28D12 71653.0008
Class: RESTRICTED
Siemens AG 3.6.3-00301-0592
Power Generation Page: 2/ 28 0306E
Gas Turbine Parts Usage Tables
Spare Parts Item-ID to WB Item-ID, TIN and Item Position
20340.0028.0175.0004
permitted without express written authority. Offenders will be liable for
23101.0077.0004
23101.0200.0004
23102.0077.0004
23102.0200.0004
A2A50001071 PB0000010076 H12H60J59 23130.0003
23200.0001.0006.0011
of a utility model or design, are reserved.
Siemens AG 3.6.3-00301-0592
Power Generation Page: 3/ 28 0306E
Gas Turbine Parts Usage Tables
Spare Parts Item-ID to WB Item-ID, TIN and Item Position
20600.0008.0002
20600.0008.0004
20600.0008.0006
21100.0003.0006
21100.0004.0006
21100.0005.0006
21100.0006.0006
21100.0007.0006
21100.0008.0006
21100.0009.0006
21100.0010.0006
21100.0011.0006
21110.0004.0006
21201.0001.0003.0006
21201.0001.0004.0006
21201.0001.0005.0006
21201.0001.0006.0006
21201.0001.0007.0006
21201.0001.0008.0006
A2A50005603 PB0000000779 H10E01E98 20500.0003.0006
A2A50005644 PB0000000009 H00A21A41 21000.0037
A2A50005653 PB0000000037 H00A40G45 20550.0049
A2A50005675 PB0000000074 H00A52H49 20550.0054
20650.0024
A2A50005718 PB0000000179 H00A79K32 20500.0004.0015
A2A50005720 PB0000000194 H00A90C28 21000.0115
A2A50005729 PB0000000224 H00B09J87 23010.0083
A2A50005746 PB0000000337 H00B45D94 21110.0012
Class: RESTRICTED
21210.0004
A2A50005755 PB0000000348 H00B47D33 85152.0001.0044
A2A50005786 PB0000000400 H00B74C95 20550.0026
Siemens AG 3.6.3-00301-0592
Power Generation Page: 4/ 28 0306E
Gas Turbine Parts Usage Tables
Spare Parts Item-ID to WB Item-ID, TIN and Item Position
Siemens AG 3.6.3-00301-0592
Power Generation Page: 5/ 28 0306E
Gas Turbine Parts Usage Tables
Spare Parts Item-ID to WB Item-ID, TIN and Item Position
Siemens AG 3.6.3-00301-0592
Power Generation Page: 6/ 28 0306E
Gas Turbine Parts Usage Tables
Spare Parts Item-ID to WB Item-ID, TIN and Item Position
Siemens AG 3.6.3-00301-0592
Power Generation Page: 7/ 28 0306E
Gas Turbine Parts Usage Tables
Spare Parts Item-ID to WB Item-ID, TIN and Item Position
Siemens AG 3.6.3-00301-0592
Power Generation Page: 8/ 28 0306E
Gas Turbine Parts Usage Tables
Spare Parts Item-ID to WB Item-ID, TIN and Item Position
Siemens AG 3.6.3-00301-0592
Power Generation Page: 9/ 28 0306E
Gas Turbine Parts Usage Tables
Spare Parts Item-ID to WB Item-ID, TIN and Item Position
Siemens AG 3.6.3-00301-0592
Power Generation Page: 10/ 28 0306E
Gas Turbine Parts Usage Tables
Spare Parts Item-ID to WB Item-ID, TIN and Item Position
Siemens AG 3.6.3-00301-0592
Power Generation Page: 11/ 28 0306E
Gas Turbine Parts Usage Tables
Spare Parts Item-ID to WB Item-ID, TIN and Item Position
23102.0034
A2A50184757 PB0000167920 - 20510.0020
20610.0020
A2A50185082 PB0000170002 - 20600.0008.0005
A2A50185187 PB0000135880 - 22000.0016
A2A50185189 PB0000133229 - 22000.0004
A2A50185190 PB0000139875 - 22000.0019
A2A50185192 PB0000158224 - 20310.0108.0012
A2A50185197 PB0000094978 - 20112.0070
A2A50185198 PB0000095068 - 20112.0071
A2A50185199 PB0000095135 - 20112.0073
A2A50185200 PB0000095209 - 20112.0075
20650.0064
22010.0004
A2A50185201 PB0000095279 - 20112.0076
A2A50185202 PB0000095352 - 20112.0078
A2A50185203 PB0000095407 - 20112.0079
A2A50185204 PB0000095550 - 20112.0110
20113.0110
A2A50185205 PB0000095622 - 20112.0111
20113.0111
A2A50185206 PB0000095680 - 20112.0112
20113.0112
Class: RESTRICTED
Siemens AG 3.6.3-00301-0592
Power Generation Page: 12/ 28 0306E
Gas Turbine Parts Usage Tables
Spare Parts Item-ID to WB Item-ID, TIN and Item Position
Siemens AG 3.6.3-00301-0592
Power Generation Page: 13/ 28 0306E
Gas Turbine Parts Usage Tables
Spare Parts Item-ID to WB Item-ID, TIN and Item Position
Siemens AG 3.6.3-00301-0592
Power Generation Page: 14/ 28 0306E
Gas Turbine Parts Usage Tables
Spare Parts Item-ID to WB Item-ID, TIN and Item Position
23101.0022
23102.0022
A2A50185455 PB0000169897 H147H459 23200.0001.0006.0001
A2A50185456 PB0000169901 H147H459 23200.0001.0006.0002
A2A50185481 PB0000095481 - 20112.0080
A2A50185482 PB0000095912 - 20112.0120
20113.0120
A2A50185722 PB0000132412 - 20600.0006.0007
A2A50185730 PB0000133060 - 21201.0001.0003
A2A50185755 PB0000133301 - 22000.0049
A2A50185810 PB0000139422 - 86110.0003
A2A50185853 PB0000142608 - 85152.0001.0042
A2A50185945 PB0000143774 - 21201.0002.0006
A2A50185947 PB0000143807 - 22010.0021
A2A50185948 PB0000143809 - 22010.0023
A2A50185950 PB0000143815 - 22000.0032.0001
A2A50185951 PB0000143816 - 22000.0032.0002
A2A50185952 PB0000143818 - 22000.0032.0003
A2A50185965 PB0000143919 - 22010.0024
A2A50185966 PB0000143925 - 22010.0027
A2A50186031 PB0000150390 - 20113.0015
A2A50186051 PB0000151200 - 20500.0006.0013
Class: RESTRICTED
Siemens AG 3.6.3-00301-0592
Power Generation Page: 15/ 28 0306E
Gas Turbine Parts Usage Tables
Spare Parts Item-ID to WB Item-ID, TIN and Item Position
23101.0200.0002
damages. All rights, including rights created by patent grant or registration
permitted without express written authority. Offenders will be liable for
23102.0077.0002
23102.0200.0002
A2A50187204 PB0000172295 - 22000.0021
A2A50187258 PB0000169930 - 21110.0004.0008
A2A50187259 PB0000169958 - 21201.0001.0005.0008
of a utility model or design, are reserved.
21201.0001.0006.0008
21201.0001.0007.0008
21201.0001.0008.0008
A2A50187262 PB0000170005 - 20600.0008.0003
A2A50187287 PB0000170123 - 21100.0005.0005
A2A50187288 PB0000170125 - 21100.0006.0005
21100.0007.0005
21100.0008.0005
21100.0009.0005
21100.0010.0005
21100.0011.0005
A2A50187301 PB0000169998 - 20600.0008.0007
A2A50187308 PB0000170100 - 20500.0007.0009
A2A50189823 PB0000180543 - 20550.0021
A2A50190813 PB0000181923 - 20340.0028.0077
A2A50191001 PB0000164046 - 20310.0010.0003
A2A50191002 PB0000164049 - 20310.0011.0003
A2A50191003 PB0000164052 - 20310.0012.0003
A2A50193240 PB0000183715 - 23200.0025
A2A50193587 PB0000174518 - 23010.0028
A2A50194842 PB0000166399 - 71653.0002
A2A50194843 PB0000166400 - 71653.0003
A2A50194864 PB0000182048 - 75611.0001.0051
75612.0001.0051
Class: RESTRICTED
75621.0001.0051
75622.0001.0051
A2A50194871 PB0000190367 - 23200.0002.0011.0001
Siemens AG 3.6.3-00301-0592
Power Generation Page: 16/ 28 0306E
Gas Turbine Parts Usage Tables
Spare Parts Item-ID to WB Item-ID, TIN and Item Position
74603.0002.1010
permitted without express written authority. Offenders will be liable for
74604.0002.1010
74605.0002.1010
A2A50196632 PB0000174730 - 74602.0002.1011
74603.0002.1011
74604.0002.1011
74605.0002.1011
of a utility model or design, are reserved.
Siemens AG 3.6.3-00301-0592
Power Generation Page: 17/ 28 0306E
Gas Turbine Parts Usage Tables
Spare Parts Item-ID to WB Item-ID, TIN and Item Position
20600.0001.0002.0015
damages. All rights, including rights created by patent grant or registration
permitted without express written authority. Offenders will be liable for
20600.0007.0010
20650.0055
23010.0141
23101.0049
23102.0049
23200.0001.0040.0012
72152.0055.0004
of a utility model or design, are reserved.
Siemens AG 3.6.3-00301-0592
Power Generation Page: 18/ 28 0306E
Gas Turbine Parts Usage Tables
Spare Parts Item-ID to WB Item-ID, TIN and Item Position
23210.0002.0015
A2A50224357 PB0000228056 - 23130.0004
A2A50224359 PB0000228059 - 23130.0002
Siemens AG 3.6.3-00301-0592
Power Generation Page: 19/ 28 0306E
Gas Turbine Parts Usage Tables
Spare Parts Item-ID to WB Item-ID, TIN and Item Position
Siemens AG 3.6.3-00301-0592
Power Generation Page: 20/ 28 0306E
Gas Turbine Parts Usage Tables
Spare Parts Item-ID to WB Item-ID, TIN and Item Position
Siemens AG 3.6.3-00301-0592
Power Generation Page: 21/ 28 0306E
Gas Turbine Parts Usage Tables
Spare Parts Item-ID to WB Item-ID, TIN and Item Position
Siemens AG 3.6.3-00301-0592
Power Generation Page: 22/ 28 0306E
Gas Turbine Parts Usage Tables
Spare Parts Item-ID to WB Item-ID, TIN and Item Position
74604.0002.1020
A2A50269831 PB0000271216 - 74605.0002.1021
A2A50269832 PB0000271220 - 74602.0002.1060
Siemens AG 3.6.3-00301-0592
Power Generation Page: 23/ 28 0306E
Gas Turbine Parts Usage Tables
Spare Parts Item-ID to WB Item-ID, TIN and Item Position
Siemens AG 3.6.3-00301-0592
Power Generation Page: 24/ 28 0306E
Gas Turbine Parts Usage Tables
Spare Parts Item-ID to WB Item-ID, TIN and Item Position
Siemens AG 3.6.3-00301-0592
Power Generation Page: 25/ 28 0306E
Gas Turbine Parts Usage Tables
Spare Parts Item-ID to WB Item-ID, TIN and Item Position
Siemens AG 3.6.3-00301-0592
Power Generation Page: 26/ 28 0306E
Gas Turbine Parts Usage Tables
Spare Parts Item-ID to WB Item-ID, TIN and Item Position
Siemens AG 3.6.3-00301-0592
Power Generation Page: 27/ 28 0306E
Gas Turbine Parts Usage Tables
Spare Parts Item-ID to WB Item-ID, TIN and Item Position
74603.0002.1050
permitted without express written authority. Offenders will be liable for
74604.0002.1050
A2A50308950 PG0030310200 - 74602
A2A50308953 PG0030312300 - 74605
A2A50308957 PG0030312000 - 74604
of a utility model or design, are reserved.
Siemens AG 3.6.3-00301-0592
Power Generation Page: 28/ 28 0306E
Gas Turbine General User Information
Test Records Allocation Table, Component Class to Design
Group
Siemens AG 3.7-0020-0592
Power Generation Page: 1/ 7 0206E
Gas Turbine General User Information
Test Records Allocation Table, Component Class to Design
Group
41110 Cover
41111 Cover
41120 Bearing Seal Ring
41122 Bearing Seal Ring
41136 Hydraulic Lifting Device
41140 Oil Box
41201 Combined Journal and Thrust
Bearing
41204 Bearing Shell
41222 Adjusting Ring
42330 Rotor Seal
Instrumentation Compressor 20510 41300 Compressor Bearing
Bearing Instrumentation
Bearing Casing Compressor, 20550 41000 Bearing Casing, Compressor
Assembly
Bearing Casing, Turbine 20600 12146 Casing Liner
12340 Shaft Seal
16000 Bearing Casing, Turbine
16010 Oil Pipe, Drain
16011 Oil Pipe, Feed
16100 Bearing Casing
16105 Bearing Casing
16106 Bearing Body
16120 Bearing Seal Ring
16122 Cover
Class: RESTRICTED
Siemens AG 3.7-0020-0592
Power Generation Page: 2/ 7 0206E
Gas Turbine General User Information
Test Records Allocation Table, Component Class to Design
Group
Siemens AG 3.7-0020-0592
Power Generation Page: 3/ 7 0206E
Gas Turbine General User Information
Test Records Allocation Table, Component Class to Design
Group
Siemens AG 3.7-0020-0592
Power Generation Page: 4/ 7 0206E
Gas Turbine General User Information
Test Records Allocation Table, Component Class to Design
Group
Drain, Gas Turbine Casing 71608 02080 Drain, Gas Turbine Casing
Temperature Measuring Points 71653 01361 Temperature Measuring Points at
at Turbine Turbine
Blow Off Line 71658 02010 Blow off Lines
Instrumentation Turbine Bearing 72151 16300 Instrumentation Rear Bearing
Instrumentation Compressor 72152 41300 Compressor Bearing
Bearing Instrumentation
Control Valves, Cooling Air 72603 n/a
Extraction Air Piping 72656 02015 Extraction Air Piping
Inspection Tube 73510 10642 Inspection Tube
Analog Module for Flame 73602 01324 Electrical Devices at Combustion
Detector Chamber
Seal Air Valve, Fuel Oil, 73611 05525 Seal Air Valve, Fuel Oil, Diffusion
Diffusion
Seal Air Valve, Fuel Oil, Premix 73612 05526 Seal Air Valve, Fuel Oil, Premix
Seal Air Cooler 73613 n/a
damages. All rights, including rights created by patent grant or registration of
The reproduction, transmission or use of this document or its content is not
Fuel Oil Piping on Combustion 73651 10662 Fuel Oil Piping, Combustion
permitted without express written authority. Offenders will be liable for
Chamber Chamber
Fuel Gas Piping on Combustion 73652 10663 Fuel Gas Piping, Combustion
Chamber Chamber
Fuel Oil Package 74101 90902 Fuel Oil Package
Fuel Oil Diffusion Feed Stop 74102 05532 Fuel Oil Diffusion Feed Stop Valve 1
a utility model or design, are reserved.
Fuel Gas Diffusion Control Valve 74603 06802 Fuel Gas Diffusion Control Valve
06808 Fuel Gas Diffusion Control Valve
Siemens AG 3.7-0020-0592
Power Generation Page: 5/ 7 0206E
Gas Turbine General User Information
Test Records Allocation Table, Component Class to Design
Group
Fuel Gas Diffusion Control Valve 74603 06812 Actuator, Fuel Gas Diffusion Control
Valve
06818 Actuator, Fuel Gas Diffusion Control
Valve
Fuel Gas Premix Control Valve 74604 06809 Fuel Gas Premix Control Valve
06819 Actuator, Fuel Gas Premix Control
Valve
Pilot Gas Control Valve 74605 90957 Pilot Gas Control Valve
Heat Tracing, Fuel Gas Piping 74657 01223 Heat Tracing, Fuel Gas Piping
NOx Water Package 75601 90991 NOx-Water Package
Hydraulic Oil Supply Package 76601 09600 Hydraulic Package
Pneumatic Package 77101 n/a
Special Wrenches 81502 01402 Special Wrenches
Disassembly Device Turbine 81525 01425 Disassembly Device Turbine
Bearing Bearing
Erection Device, Exhaust Gas 81527 01427 Assembly Device, Exhaust Diffusor
Diffuser
damages. All rights, including rights created by patent grant or registration of
The reproduction, transmission or use of this document or its content is not
Chamber Chamber
Hydraulic Tools, Initial Assembly 81581 n/a
Major Inspection Supports 81605 n/a
Bolt Tightening Device 81608 01408 Bolt Tightening Device
a utility model or design, are reserved.
Siemens AG 3.7-0020-0592
Power Generation Page: 6/ 7 0206E
Gas Turbine General User Information
Test Records Allocation Table, Component Class to Design
Group
Class: RESTRICTED
Siemens AG 3.7-0020-0592
Power Generation Page: 7/ 7 0206E
Gas Turbine General User Information
Test Records Allocation Table, Design Group to Component Class
Siemens AG 3.7-0021-0592
Power Generation Page: 1/ 9 0206E
Gas Turbine General User Information
Test Records Allocation Table, Design Group to Component Class
Fuel Oil Diffusion Feed Stop 05532 74102 Fuel Oil Diffusion Feed Stop Valve 1
permitted without express written authority. Offenders will be liable for
Valve 1
Actuator, Fuel Oil Premix Stop 05541 74106 Fuel Oil Premix Stop Valve 1
Valve 1
Actuator, Fuel Oil Diffusion 05542 74102 Fuel Oil Diffusion Feed Stop Valve 1
Feed Stop Valve 1
a utility model or design, are reserved.
Fuel Gas Stop Valve 05602 74602 Fuel Gas Stop Valve
Actuator, Fuel Gas Stop Valve 05612 74602 Fuel Gas Stop Valve
Fuel Gas Diffusion Control 06802 74603 Fuel Gas Diffusion Control Valve
Valve
Fuel Gas Diffusion Control 06808 74603 Fuel Gas Diffusion Control Valve
Valve
Fuel Gas Premix Control Valve 06809 74604 Fuel Gas Premix Control Valve
Actuator, Fuel Gas Diffusion 06812 74603 Fuel Gas Diffusion Control Valve
Control Valve
Actuator, Fuel Gas Diffusion 06818 74603 Fuel Gas Diffusion Control Valve
Control Valve
Actuator, Fuel Gas Premix 06819 74604 Fuel Gas Premix Control Valve
Control Valve
Fuel Oil Diffusion Control Valve 06902 74104 Fuel Oil Control Valve 1
Actuator, Fuel Oil Diffusion 06912 74104 Fuel Oil Control Valve 1
Control Valve
Blow Off Valves 08004 71602 Blow Off Valves
Hydraulic Package 09600 76601 Hydraulic Oil Supply Package
Annular Combustion Chamber 10400 23010 Annular CC, Assembly
Annular CC, Measuring Points 10407 23102 Outer Shell Assembly, LP
23101 Outer Shell Assembly, UP
Class: RESTRICTED
Siemens AG 3.7-0021-0592
Power Generation Page: 2/ 9 0206E
Gas Turbine General User Information
Test Records Allocation Table, Design Group to Component Class
Siemens AG 3.7-0021-0592
Power Generation Page: 3/ 9 0206E
Gas Turbine General User Information
Test Records Allocation Table, Design Group to Component Class
Siemens AG 3.7-0021-0592
Power Generation Page: 4/ 9 0206E
Gas Turbine General User Information
Test Records Allocation Table, Design Group to Component Class
Assembly Assembly
Intermediate Shaft 41012 86100 Intermediate Shaft
Intermediate Shaft 41013 86100 Intermediate Shaft
Compressor and Generator, 41020 86110 Compressor and Generator,
Assembly Assembly
a utility model or design, are reserved.
Siemens AG 3.7-0021-0592
Power Generation Page: 5/ 9 0206E
Gas Turbine General User Information
Test Records Allocation Table, Design Group to Component Class
Siemens AG 3.7-0021-0592
Power Generation Page: 6/ 9 0206E
Gas Turbine General User Information
Test Records Allocation Table, Design Group to Component Class
Siemens AG 3.7-0021-0592
Power Generation Page: 7/ 9 0206E
Gas Turbine General User Information
Test Records Allocation Table, Design Group to Component Class
Siemens AG 3.7-0021-0592
Power Generation Page: 8/ 9 0206E
Gas Turbine General User Information
Test Records Allocation Table, Design Group to Component Class
Gas Turbine Rotor Shipping 44279 20390 Gas Turbine Rotor Shipping Lock
Lock
St. 1 Rotor Blade 44601 20310 Rotor
St. 2 Rotor Blade 44602 20310 Rotor
St. 3 Rotor Blade 44603 20310 Rotor
St. 4 Rotor Blade 44604 20310 Rotor
St. 5 Rotor Blade 44605 20310 Rotor
St. 6 Rotor Blade 44606 20310 Rotor
St. 7 Rotor Blade 44607 20310 Rotor
St. 8 Rotor Blade 44608 20310 Rotor
St. 9 Rotor Blade 44609 20310 Rotor
St. 10 Rotor Blade 44610 20310 Rotor
St. 11 Rotor Blade 44611 20310 Rotor
St. 12 Rotor Blade 44612 20310 Rotor
St. 13 Rotor Blade 44613 20310 Rotor
damages. All rights, including rights created by patent grant or registration of
The reproduction, transmission or use of this document or its content is not
Siemens AG 3.7-0021-0592
Power Generation Page: 9/ 9 0206E
Gas Turbine Table of Contents
Test Records Factory Assembly
Test Records
General
Qty. 1)
Table of Contents, Factory Assembly.............................................. 3.7-3010-0592/1-2 0206E 1 1 14.02.06
Cover Sheet .................................................................................... 3.7-0001-0001 1105DE 1 1 31.01.06
General Notes ................................................................................. 3.7-3030-9080 0404DE 1 1 27.01.06
Turbine/Compressor, Component Identification .............................. 3.7-3040-8100 0303DE 1 1 04.01.06
Rotor
Component Identification................................................................. 3.7-3130-9080/1-2 0404DE 1 1 14.12.05
Turbine Blading Chart ..................................................................... 3.7-3140-0001 1101DE 4 4 10.11.05
Balancing 3.7-3150-0001/1-2 0105DE 1 1 09.11.05
Tensioning....................................................................................... 3.7-3160-9100/1-4 0304DE 1 1 12.12.05
Blading
Blade Clearances ............................................................................ 3.7-3330-9080 0404DE 1 1 13.01.06
Radial Blade Clearances, Lower Half Casings ................................ 3.7-3340-9080 0404DE 1 1 10.01.06
Axial Blade Clearances, Lower Half Casings .................................. 3.7-3350-9080 0404DE 1 1 27.01.06
Radial Blade Clearances, Compressor ........................................... 3.7-3360-9080/1-2 0404DE 1 1 27.01.06
Radial Blade Clearances, Turbine................................................... 3.7-3370-9080 0404DE 1 1 27.01.06
Casing
Tightening Horizontal Joint Bolts..................................................... 3.7-3430-9100 0799DE 1 1 07.12.05
Tightening Horizontal Joint Bolts..................................................... 3.7-3440-8100 0303DE 1 1 19.12.05
Vertical Joint Tightening Bolts ......................................................... 3.7-3450-9100 1199DE 1 1 19.12.05
Vertical Joint Tightening Bolts ......................................................... 3.7-3460-8100 0303DE 1 1 19.12.05
Grooves for Stator Blade Carriers ................................................... 3.7-3470-8100 0303DE 1 1 02.02.06
Outlet Stator Blade Ring, Stator Blade Carrier, Thrust-Shims......... 3.7-3480-9080 0404DE 1 1 19.12.05
Bearing Casing, Tightening Bolts .................................................... 3.7-3490-8100 0303DE 1 1 28.11.05
Class: RESTRICTED
1) Quantity
Siemens AG 3.7-3010-0592/1
Power Generation 0206E
Gas Turbine Table of Contents
Test Records Factory Assembly
Combustion Chamber
Annular Combustion Chamber, Outer Shell, Check Dimensions..... 3.7-3530-8100 0303DE 1 1 17.01.06
Annular Combustion Chamber, Charge Id. No. of Ceramic Tiles .... 3.7-3540-9100/1-24 0205DE 1 1 03.11.05
Turbine/Compressor
Alignment ........................................................................................ 3.7-3730-9080 0404DE 1 1 02.02.06
Water Hose Levelling ...................................................................... 3.7-3740-8100 0303DE 1 1 30.01.06
Combustion Chamber
including rights created by patent grant or registration of
The reproduction, transmission or use of this document
1) Quantity
Siemens AG 3.7-3010-0592/2
Power Generation 0206E
to be
supplied
later
to be
supplied
later
Gas Turbine Information on Table of Contents
Test Records Inspection
Information
on the
Dear Customer,
Siemens AG 3.7-0105-0001
Power Generation 0405E
Gas Turbine Table of Contents
Test Records Minor Inspection
Test Records
General
Qty. 1)
Table of Contents, Minor Inspection .............................................. 3.7-0110-9080 0106E 1
Cover Sheet................................................................................... 3.7-0001-0001 1105DE 1
Replacement Parts Installed.......................................................... 3.7-0244-0001/1-3 0105DE 1
Blading
Compressor Blading, Designations................................................ 3.7-0143-0001/1-5 0500DE 1
Compressor Stator Blades (adjustable), Airfoil Check, Stage 0..... 3.7-0150-6000 0199DE 1
Compressor Rotor Blades, Airfoil Check ....................................... 3.7-0160-6000 0398DE 1
Turbine/Compressor, Radial Blade Clearances, Compressor ....... 3.7-0170-0001 0305DE 1
Turbine Stator Blades, Airfoil Check, Stage 1................................ 3.7-0180-9100 1200DE 1
Turbine Rotor Blades, Airfoil Check, Stage 1 ................................ 3.7-0190-9100 1200DE 1
Turbine Stator Blades, Blade Check, Stage 4 ............................... 3.7-0200-9000 1200DE 1
Turbine Rotor Blades, Airfoil Check, Stage 4 ................................ 3.7-0210-9100 1200DE 1
including rights created by patent grant or registration of
The reproduction, transmission or use of this document
Combustion Chamber
a utility model or design, are reserved
Annular Combustion Chamber, Charge Id. No. of Ceramic Tiles... 3.7-3540-9100/1-24 0205DE 1
Tightening Torques for Combustion Chamber Piping .................... 3.7-3550-9000/1-2 0304DE 1
Annular Combustion Chamber, Location of Ceramic Tiles ............ 3.7-0240-9100/1-45 0603DE 1
Annular Combustion Chamber, Tile Holder ................................... 3.7-0245-9100 1100DE 1
Annular Combustion Chamber, Visual Inspection, Heat Shields ... 3.7-0250-6000 0199DE 1
Annular Combustion Chamber, Visual Inspection, Mock-up .......... 3.7-0252-6000 0199DE 1
Annular Combust., Chamber, Finding classes, heat shield plates . 3.7-0255-9100/1-4 0305DE 1
Test Record Inlet Shell Plate Finding Classes, Inlet Shell Plate .... 3.7-0258-9100/1-9 0305DE 1
Annular Combust. Chamber, Visual Inspect., Burner Inserts......... 3.7-0260-6000 0199DE 1
Visual Inspektion Burner Axial/Diagonal swirlers HR3-burner........ 3.7-0270-0001 0103DE 1
Visual Inspektion Burner Axial/Diagonal swirlers H-burner ............ 3.7-0271-0001 0103DE 1
Ring-Brennkammer, Sichtkontrolle, Znder .................................. 3.7-0280-9000 0705DE 1
Operating Values
Checks Prior to and during Startup................................................ 3.7-1050-0001/1-4 1098DE 1
Operating Log................................................................................ 3.7-1070-9100/1-9 0205DE 1
Class: RESTRICTED
1) Quantity
Siemens AG 3.7-0110-9080
Power Generation 0106E
Gasturbinen Gas Turbine Betriebsaufschreibungen
Protokoll Test Record Operating Log
Kennwort: Maschinen-/A-Nr.:
Job name: Serial/Order No.:
Baugruppe: Zeichnungs-Nr.: Index:
Design group: Drawing No.: Rev.:
8
p amb Umgebungsdruck
9 mbar
p amb Baromatic pressure
amb Umgebungstemp.
10 C
amb Ambient temp.
Relative Luftfeuchtigkeit
11 %
Relative humidity
Produzierte kWh
P GT whrend t p
12 kWh generated kWh
during tp
Gemessene Periode
tP fr P GT
s
13 Measured period
for P GT
24
Verdichterdruck und -temperatur / Compressor pressures and temperatures
Verdichtereintritts-
25 MBA11 CT101 VI 1 temperature
C
Compressor inlet
temperature
Verdichtereintritts-
26 MBA11 CT102 VI 2 temperature
C
Compressor inlet
temperature
Siemens AG 3.7-1070-9100/1
Power Generation 0205DE
Gasturbinen Gas Turbine Betriebsaufschreibungen
Protokoll Test Record Operating Log
Kennwort: Maschinen-/A-Nr.:
Job name: Serial/Order No.:
Baugruppe: Zeichnungs-Nr.: Index:
Design group: Drawing No.: Rev.:
31
32
33
korrigierte Turbinenaustrittstemperatur / Corrected turbine outlet temperature
Turbinenaustritts-
34
MBA26 CT101 AT 1 temperature
C
Turbine outlet
temperature
Turbinenaustritts-
35
MBA26 CT102 AT 1 temperature
C
Turbine outlet
temperature
Turbinenaustritts-
36
MBA26 CT103 AT 1 temperature
C
Turbine outlet
Temperature
Turbinenaustritts-
37
MBA26 CT104 AT 1 temperature
C
Turbine outlet
temperature
Turbinenaustritts-
38
MBA26 CT105 AT 1 temperature
C
Turbine outlet
temperature
Turbinenaustritts-
39
MBA26 CT106 AT 1 temperatur
C
Turbine outlet
temperature
Turbinenaustritts-
40
MBA26 CT107 AT 1 temperatur
C
Turbine outlet
temperature
Turbinenaustritts-
41
MBA26 CT108 AT 1 temperatur
C
Turbine outlet
temperature
Siemens AG 3.7-1070-9100/2
Power Generation 0205DE
Gasturbinen Gas Turbine Betriebsaufschreibungen
Protokoll Test Record Operating Log
Kennwort: Maschinen-/A-Nr.:
Job name: Serial/Order No.:
Baugruppe: Zeichnungs-Nr.: Index:
Design group: Drawing No.: Rev.:
Siemens AG 3.7-1070-9100/3
Power Generation 0205DE
Gasturbinen Gas Turbine Betriebsaufschreibungen
Protokoll Test Record Operating Log
Kennwort: Maschinen-/A-Nr.:
Job name: Serial/Order No.:
Baugruppe: Zeichnungs-Nr.: Index:
Design group: Drawing No.: Rev.:
60
61
Kesseleintritts-
62 MBR20CT111 TTII temperatur
C
Boiler inlet temperature
Kesseleintritts-
63 MBR20CT112 TTII temperatur
C
Boiler inlet temperature
Kesseleintritts-
64 MBR20CT113 TTII temperatur
C
Boiler inlet temperature
Kesseleintritts-
65 MBR20CT114 TTII temperatur
C
Boiler inlet temperature
Kesseleintritts-
66 MBR20CT115 TTII temperatur
C
Boiler inlet temperature
Kesseleintritts-
67 MBR20CT116 TTII temperatur
C
Boiler inlet temperature
Durchschnitts-
TTII
68 temperatur
C
Average Temperature
Schwingungen Turbine / Verdichter / Turbine / compressor vibrations
Gehuseschwingungen
MBD11 CY101
v eff Turbinenlager
MBD11 CY102 mm/s
69 Casing vibrations
turbine bearing
Gehuseschwingungen
MBD12 CY101 v eff Verdichterlager
70 MBD12 CY102 Casing vibrations mm/s
turbine bearing
Wellenschwingen
71 MBD11 CY111 Turbinenlager [Amplitude s max ]
m
...112 Shaft vibrations
turbine bearing [amplitude s max ]
Wellenschwingen
72 MBD12 CY111 Verdichterlager [Amplitude s max ]
m
...112 Shaft vibrations
turbine bearing [amplitude s max ]
73
74
Abteilung: Bearbeiter: Medatum: Gegenzeichnung:
Department: Prepared by: Date of test: Countersigned:
Siemens AG 3.7-1070-9100/4
Power Generation 0205DE
Gasturbinen Gas Turbine Betriebsaufschreibungen
Protokoll Test Record Operating Log
Kennwort: Maschinen-/A-Nr.:
Job name: Serial/Order No.:
Baugruppe: Zeichnungs-Nr.: Index:
Design group: Drawing No.: Rev.:
Heizlvorlaufme
89 MBN17 CF101 V H Vorl. Diff. kg/s
nge Diffusion
FO inlet flow
rate diffusion
Heizlrcklaufme
90 MBN51 CF101 V H Rckl. nge kg/s
FO return flow
rate
91 MBN25 CF101 V H Vorl. Vorm. Heizl-Vorlauf
Vormisch kg/s
FO inlet premix
92 MBN56 CT501 H Temperatur Bypass
FO temperatur bypass C
Siemens AG 3.7-1070-9100/5
Power Generation 0205DE
Gasturbinen Gas Turbine Betriebsaufschreibungen
Protokoll Test Record Operating Log
Kennwort: Maschinen-/A-Nr.:
Job name: Serial/Order No.:
Baugruppe: Zeichnungs-Nr.: Index:
Design group: Drawing No.: Rev.:
Heizgasmenge
100 MBP10 CF101 V nHG FG flow rate m3/min
HG-Druck
101 MBP10 CP102 p Menge FG pressure bar
HG-Temperatur
102 MBP10 CT101 Menge FG temperature C
Schmierlsystem MBV / Lube oil system MBV
105 p Lagerlzulaufdruck
MBV26 CP501 bar
p Bearing oil feed pressure
106 p Schmierlpumpendruck
MBV21 CP501 bar
p Lube oil boost pressure
107 p Anhebeldruck
MBV30 CP502 bar
p Jacking oil pressure
Schmierltanktemperatur
108 MBV10 CT101 C
Lube oil tank temperature
Lagerlzulauftemperatur
109 MBV26 CT101 C
Bearing oil feed temp.
l vor Khler
110 MBV23 CT511 C
Oil before cooler
l nach Khler
111 MBV23 CT512 C
Oil after cooler
Wasser vor Khler
112 MBV23 CT513 C
Water before cooler
Wasser nach Khler
113 MBV23 CT514 C
Water after cooler
114 p l vor Khler
MBV23 CP511 bar
p Oil before cooler
115 p l nach Khler
MBV23 CP512 bar
p Oil after cooler
Siemens AG 3.7-1070-9100/6
Power Generation 0205DE
Gasturbinen Gas Turbine Betriebsaufschreibungen
Protokoll Test Record Operating Log
Kennwort: Maschinen-/A-Nr.:
Job name: Serial/Order No.:
Baugruppe: Zeichnungs-Nr.: Index:
Design group: Drawing No.: Rev.:
Siemens AG 3.7-1070-9100/7
Power Generation 0205DE
Gasturbinen Gas Turbine Betriebsaufschreibungen
Protokoll Test Record Operating Log
Kennwort: Maschinen-/A-Nr.:
Job name: Serial/Order No.:
Baugruppe: Zeichnungs-Nr.: Index:
Design group: Drawing No.: Rev.:
Emissionen / Emissions
160 NOx ppm
161 CO ppm
164 O2 vol%
Siemens AG 3.7-1070-9100/8
Power Generation 0205DE
Bestimmung der Temperaturgrenzwerte
Gasturbinen Gas Turbine an Turbinenaustritt und Abgaskanal
Protokoll Test Record Determination of Temperature Limits
at Turbine Outlet and Exhaust Duct
Kennwort: Maschinen-/A-Nr.:
Job name: Serial/Order No.:
No Tag Number Parameter Unit
Nr. KKS Parameter Einheit
date and time of test:
1 Datum und Uhrzeit der Messung:
simple or combined cycle
2 Solobetrieb oder Kombibetrieb
load
3 Last
fuel
4 Brennstoff
premix or diffusion mode
5 Vormisch- oder Diffusionsbetrieb
water or steam injection
6 Wasser- oder Dampfeindsung
turbine inlet temperature (ISO) appr.
7 TI Turbineneintrittstemperatur (ISO) ca. C
IGV Position
8 MBA11 CG101 Stellung Vorleitgitter %
speed
9 MBA10 CS101 N Drehzahl rpm
ambient pressure
10 p AMB Umgebungsdruck mbar
compressor inlet temperature 1
11 MBA11 CT101 CI1 Verdichtereintrittstemperatur 1 C
compressor inlet temperature 2
12 MBA11 CT102 CI2 Verdichtereintrittstemperatur 2 C
compressor inlet temperature 3
13 MBA11 CT103 CI3 Verdichtereintrittstemperatur 3 C
compressor inlet temperature 4
14 MBA11 CT104 CI4 Verdichtereintrittstemperatur 4 C
compressor inlet temperature, average of 4
15 CI Verdichtereintrittstemperatur, Mittel aus 4 C
H2O injection mass flow
16 M H2O Massenstrom H2O Einspritzung kg/s
compressor outlet gauge pressure
17 MBA12 CP101 PE CO Verdichteraustrittsdruck (Anzeige) bar
combustion chamber pressure difference
18 MBM10 CP101 DP CBC Druckdifferenz Brennkammer mbar
generator output, indication
19 MKA01 CE003 P GTm Generatorleistung, Anzeige MW
generator output, kWh/powermeter for comparision
20 P GTm Generatorleistung, kWh/Leistungsmesser zum MW
Vergleich
generator output acc 3.1-0120-0334 dated 0797E
21 P GT Generatorleistung entspr. 3.1-0120-0334 Ausgabe MW
0797E
generator output from diagram, corrected
22 P GTcorr Generatorleistung aus Diagramm, korrigiert MW
turbine outlet temperature, control & protection
23 MBA26 CT101 TO1 Turbinenaustrittstemperatur, Regelung & Schutz C
turbine outlet temperature, control & protection
24 MBA26 CT102 TO2 Turbinenaustrittstemperatur, Regelung & Schutz C
Siemens AG 3.7-1110-9000/1
Power Generation 0398DE
Bestimmung der Temperaturgrenzwerte
Gasturbinen Gas Turbine an Turbinenaustritt und Abgaskanal
Protokoll Test Record Determination of Temperature Limits
at Turbine Outlet and Exhaust Duct
Kennwort: Maschinen-/A-Nr.:
Job name: Serial/Order No.:
Siemens AG 3.7-1110-9000/2
Power Generation 0398DE
Bestimmung der Temperaturgrenzwerte
Gasturbinen Gas Turbine an Turbinenaustritt und Abgaskanal
Protokoll Test Record Determination of Temperature Limits
at Turbine Outlet and Exhaust Duct
Kennwort: Maschinen-/A-Nr.:
Job name: Serial/Order No.:
Siemens AG 3.7-1110-9000/3
Power Generation 0398DE
Bestimmung der Temperaturgrenzwerte
Gasturbinen Gas Turbine an Turbinenaustritt und Abgaskanal
Protokoll Test Record Determination of Temperature Limits
at Turbine Outlet and Exhaust Duct
Kennwort: Maschinen-/A-Nr.:
Job name: Serial/Order No.:
Temperatures for Warning and Trip (Total Fuel High) at New Setting **
Temperaturwerte fr Warnmeldung und Schnellschlu (Gesamtbrennstoffmenge zu gro) bei neuer Einstellung **
turbine outlet temperature 1 warning
70 MBA26 CT101 TO1 Turbinenaustrittstemperatur 1 Warnung C
turbine outlet temperature 5 warning
71 MBA26 CT105 TO5 Turbinenaustrittstemperatur 5 Warnung C
turbine outlet temperature 9 warning
72 MBA26 CT109 TO9 Turbinenaustrittstemperatur 9 Warnung C
turbine outlet temperature 13 warning
73 MBA26 CT113 TO13 Turbinenaustrittstemperatur 13 Warnung C
turbine outlet temperature 17 warning
74 MBA26 CT117 TO17 Turbinenaustrittstemperatur 17 Warnung C
turbine outlet temperature 21 warning
75 MBA26 CT121 TO21 Turbinenaustrittstemperatur 21 Warnung C
turbine outlet temperature 1 trip
76 MBA26 CT101 TO1 Turbinenaustrittstemperatur 1 Schnellschlu C
turbine outlet temperature 5 trip
77 MBA26 CT105 TO5 Turbinenaustrittstemperatur 5 Schnellschlu C
turbine outlet temperature 9 trip
78 MBA26 CT109 TO9 Turbinenaustrittstemperatur 9 Schnellschlu C
turbine outlet temperature 13 trip
79 MBA26 CT113 TO13 Turbinenaustrittstemperatur 13 Schnellschlu C
turbine outlet temperature 17 trip
80 MBA26 CT117 TO17 Turbinenaustrittstemperatur 17 Schnellschlu C
turbine outlet temperature 21 trip
81 MBA26 CT121 TO21 Turbinenaustrittstemperatur 21 Schnellschlu C
* DJ = -(PGTm-PGTcorr)/PGTcorr*390K
600
Temperatur / Temperature C
590
580
570
560
550
540
530
520
510
500
TO10
TO11
TO12
TO13
TO14
TO15
TO16
TO17
TO18
TO19
TO20
TO21
TO22
TO23
TO24
TO1
TO2
TO3
TO4
TO5
TO6
TO7
TO8
TO9
# Num m ern der Therm oelem ente am Turbinenaustritt / # Therm ocouple at turbine outlet
Siemens AG 3.7-1110-9000/4
Power Generation 0398DE
Gas Turbine General User Information
Test Records Allocation Table, Component Class to Design
Group
Siemens AG 3.7-0020-0612
Power Generation Page: 1/ 6 0306E
Gas Turbine General User Information
Test Records Allocation Table, Component Class to Design
Group
41110 Cover
41111 Cover
41120 Bearing Seal Ring
41122 Bearing Seal Ring
41136 Hydraulic Lifting Device
41140 Oil Box
41201 Combined Journal and Thrust
Bearing
41204 Bearing Shell
41222 Adjusting Ring
42330 Rotor Seal
Instrumentation Compressor 20510 41300 Compressor Bearing
Bearing Instrumentation
Bearing Casing Compressor, 20550 41000 Bearing Casing, Compressor
Assembly
Bearing Casing, Turbine 20600 12146 Casing Liner
12340 Shaft Seal
16000 Bearing Casing, Turbine
16010 Oil Pipe, Drain
16011 Oil Pipe, Feed
16100 Bearing Casing
16105 Bearing Casing
16106 Bearing Body
16120 Bearing Seal Ring
16122 Cover
Class: RESTRICTED
Siemens AG 3.7-0020-0612
Power Generation Page: 2/ 6 0306E
Gas Turbine General User Information
Test Records Allocation Table, Component Class to Design
Group
Siemens AG 3.7-0020-0612
Power Generation Page: 3/ 6 0306E
Gas Turbine General User Information
Test Records Allocation Table, Component Class to Design
Group
Siemens AG 3.7-0020-0612
Power Generation Page: 4/ 6 0306E
Gas Turbine General User Information
Test Records Allocation Table, Component Class to Design
Group
Drain, Gas Turbine Casing 71608 02080 Drain, Gas Turbine Casing
Temperature Measuring Points 71653 01361 Temperature Measuring Points at
at Turbine Turbine
Blow Off Line 71658 02010 Blow off Lines
Instrumentation Turbine Bearing 72151 16300 Instrumentation Rear Bearing
Instrumentation Compressor 72152 41300 Compressor Bearing
Bearing Instrumentation
Control Valves, Cooling Air 72603 n/a
Extraction Air Piping 72656 02015 Extraction Air Piping
Inspection Tube 73510 10642 Inspection Tube
Analog Module for Flame 73602 01324 Electrical Devices at Combustion
Detector Chamber
Seal Air Valve, Fuel Oil, 73611 05525 Seal Air Valve, Fuel Oil, Diffusion
Diffusion
Seal Air Valve, Fuel Oil, Premix 73612 05526 Seal Air Valve, Fuel Oil, Premix
Seal Air Cooler 73613 n/a
damages. All rights, including rights created by patent grant or registration of
The reproduction, transmission or use of this document or its content is not
Fuel Oil Piping on Combustion 73651 10662 Fuel Oil Piping, Combustion
permitted without express written authority. Offenders will be liable for
Chamber Chamber
Fuel Gas Piping on Combustion 73652 10663 Fuel Gas Piping, Combustion
Chamber Chamber
Fuel Oil Package 74101 90902 Fuel Oil Package
a utility model or design, are reserved.
Fuel Oil Diffusion Feed Stop 74102 05532 Fuel Oil Diffusion Feed Stop Valve 1
Valve 1 05542 Actuator, Fuel Oil Diffusion Feed
Stop Valve 1
Fuel Oil Diffusion Return Stop 74103 05503 Fuel Oil Diffusion Return Stop Valve
Valve 05505 Fuel Oil Diffusion Return Stop Valve
05513 Actuator, Fuel Oil Diffusion Return
Stop Valve
05515 Actuator, Fuel Oil Diffusion Return
Stop Valve
Fuel Oil Control Valve 1 74104 06902 Fuel Oil Diffusion Control Valve
06912 Actuator, Fuel Oil Diffusion Control
Valve
Fuel Oil Premix Stop Valve 1 74106 05531 Fuel Oil Premix Stop Valve 1
05541 Actuator, Fuel Oil Premix Stop Valve
1
Fuel Oil Diffusion Feed Control 74109 n/a
Valve
Fuel Oil Premix Feed Control 74110 n/a
Valve
Purge Water-Package for Fuel 74201 90962 Purge Water Package for Fuel Oil
Oil
Fuel Gas Package 74601 90950 Fuel Gas Valve Package
Fuel Gas Stop Valve 74602 05602 Fuel Gas Stop Valve
05612 Actuator, Fuel Gas Stop Valve
Class: RESTRICTED
Fuel Gas Diffusion Control Valve 74603 06802 Fuel Gas Diffusion Control Valve
06808 Fuel Gas Diffusion Control Valve
Siemens AG 3.7-0020-0612
Power Generation Page: 5/ 6 0306E
Gas Turbine General User Information
Test Records Allocation Table, Component Class to Design
Group
Fuel Gas Diffusion Control Valve 74603 06812 Actuator, Fuel Gas Diffusion Control
Valve
06818 Actuator, Fuel Gas Diffusion Control
Valve
Fuel Gas Premix Control Valve 74604 06809 Fuel Gas Premix Control Valve
06819 Actuator, Fuel Gas Premix Control
Valve
Pilot Gas Control Valve 74605 90957 Pilot Gas Control Valve
Heat Tracing, Fuel Gas Piping 74657 01223 Heat Tracing, Fuel Gas Piping
NOx Water Package 75601 90991 NOx-Water Package
Hydraulic Oil Supply Package 76601 09600 Hydraulic Package
Pneumatic Package 77101 n/a
Exhaust Gas Diffuser 82100 02030 Exhaust Gas Diffuser
Axial Guide 85110 01035 Axial Guide
Support, Centre Guide Block, 85120 01064 Turbine Supports
Turbine
damages. All rights, including rights created by patent grant or registration of
The reproduction, transmission or use of this document or its content is not
Siemens AG 3.7-0020-0612
Power Generation Page: 6/ 6 0306E
Gas Turbine General User Information
Test Records Allocation Table, Design Group to Component Class
Actuator, Fuel Oil Premix Stop 05541 74106 Fuel Oil Premix Stop Valve 1
Valve 1
Siemens AG 3.7-0021-0612
Power Generation Page: 1/ 9 0306E
Gas Turbine General User Information
Test Records Allocation Table, Design Group to Component Class
Actuator, Fuel Oil Diffusion 05542 74102 Fuel Oil Diffusion Feed Stop Valve 1
Feed Stop Valve 1
Fuel Gas Stop Valve 05602 74602 Fuel Gas Stop Valve
Actuator, Fuel Gas Stop Valve 05612 74602 Fuel Gas Stop Valve
Fuel Gas Diffusion Control 06802 74603 Fuel Gas Diffusion Control Valve
Valve
Fuel Gas Diffusion Control 06808 74603 Fuel Gas Diffusion Control Valve
Valve
Fuel Gas Premix Control Valve 06809 74604 Fuel Gas Premix Control Valve
Actuator, Fuel Gas Diffusion 06812 74603 Fuel Gas Diffusion Control Valve
Control Valve
Actuator, Fuel Gas Diffusion 06818 74603 Fuel Gas Diffusion Control Valve
Control Valve
Actuator, Fuel Gas Premix 06819 74604 Fuel Gas Premix Control Valve
Control Valve
Fuel Oil Diffusion Control Valve 06902 74104 Fuel Oil Control Valve 1
damages. All rights, including rights created by patent grant or registration of
Actuator, Fuel Oil Diffusion 06912 74104 Fuel Oil Control Valve 1
The reproduction, transmission or use of this document or its content is not
Control Valve
permitted without express written authority. Offenders will be liable for
Siemens AG 3.7-0021-0612
Power Generation Page: 2/ 9 0306E
Gas Turbine General User Information
Test Records Allocation Table, Design Group to Component Class
Chamber
permitted without express written authority. Offenders will be liable for
Fuel Gas Piping, Combustion 10663 73652 Fuel Gas Piping on Combustion
Chamber Chamber
31210 Fuel Gas Piping, Combustion
Chamber
Casing Liner 12146 20600 Bearing Casing, Turbine
a utility model or design, are reserved.
Siemens AG 3.7-0021-0612
Power Generation Page: 3/ 9 0306E
Gas Turbine General User Information
Test Records Allocation Table, Design Group to Component Class
Siemens AG 3.7-0021-0612
Power Generation Page: 4/ 9 0306E
Gas Turbine General User Information
Test Records Allocation Table, Design Group to Component Class
Carrier 1
Compressor Stator Blade 42230 21200 Compressor Stator 2
Carrier 2 21201 Compressor Stator 2
Siemens AG 3.7-0021-0612
Power Generation Page: 5/ 9 0306E
Gas Turbine General User Information
Test Records Allocation Table, Design Group to Component Class
Siemens AG 3.7-0021-0612
Power Generation Page: 6/ 9 0306E
Gas Turbine General User Information
Test Records Allocation Table, Design Group to Component Class
Siemens AG 3.7-0021-0612
Power Generation Page: 7/ 9 0306E
Gas Turbine General User Information
Test Records Allocation Table, Design Group to Component Class
Gas Turbine Rotor Shipping 44279 20390 Gas Turbine Rotor Shipping Lock
Lock
St. 1 Rotor Blade 44601 20310 Rotor
St. 2 Rotor Blade 44602 20310 Rotor
St. 3 Rotor Blade 44603 20310 Rotor
St. 4 Rotor Blade 44604 20310 Rotor
St. 5 Rotor Blade 44605 20310 Rotor
St. 6 Rotor Blade 44606 20310 Rotor
St. 7 Rotor Blade 44607 20310 Rotor
St. 8 Rotor Blade 44608 20310 Rotor
St. 9 Rotor Blade 44609 20310 Rotor
St. 10 Rotor Blade 44610 20310 Rotor
St. 11 Rotor Blade 44611 20310 Rotor
St. 12 Rotor Blade 44612 20310 Rotor
St. 13 Rotor Blade 44613 20310 Rotor
St. 14 Rotor Blade 44614 20310 Rotor
St. 15 Rotor Blade 44615 20310 Rotor
St. 16 Rotor Blade 44616 20310 Rotor
St. 17 Rotor Blade 44617 20310 Rotor
Control Block, Turning Gear 90121 51270 Control Block Turning Gear
Class: RESTRICTED
Siemens AG 3.7-0021-0612
Power Generation Page: 8/ 9 0306E
Gas Turbine General User Information
Test Records Allocation Table, Design Group to Component Class
Pilot Gas Control Valve 90957 60504 Pilot Gas Control Valve
74605 Pilot Gas Control Valve
Purge Water Package for Fuel 90962 74201 Purge Water-Package for Fuel Oil
Oil
Igniter 90975 23200 Burner Assembly
31050 Burner Assembly
NOx-Water Package 90991 75601 NOx Water Package
damages. All rights, including rights created by patent grant or registration of
The reproduction, transmission or use of this document or its content is not
permitted without express written authority. Offenders will be liable for
Class: RESTRICTED
Siemens AG 3.7-0021-0612
Power Generation Page: 9/ 9 0306E
Gas Turbine Table of Contents
Test Records Factory Assembly
Test Records
General
Qty. 1)
Table of Contents, Factory Assembly.............................................. 3.7-3010-0612/1-2 0306E 1 1 22.03.06
Cover Sheet .................................................................................... 3.7-0001-0001 1105DE 1 1 17.03.06
General Notes ................................................................................. 3.7-3030-9080 0404DE 1 1 14.03.06
Turbine/Compressor, Component Identification .............................. 3.7-3040-8100 0303DE 1 1 23.02.06
Rotor
Component Identification................................................................. 3.7-3130-9080/1-2 0404DE 1 1 22.02.06
Turbine Blading Chart ..................................................................... 3.7-3140-0001 1101DE 4 4 21.02.06
Balancing 3.7-3150-0001/1-2 0105DE 1 1 07.02.06
Tensioning....................................................................................... 3.7-3160-9100/1-4 0304DE 1 1 22.02.06
Blading
Blade Clearances ............................................................................ 3.7-3330-9080 0404DE 1 1 23.02.06
Radial Blade Clearances, Lower Half Casings ................................ 3.7-3340-9080 0404DE 1 1 16.03.06
Axial Blade Clearances, Lower Half Casings .................................. 3.7-3350-9080 0404DE 1 1 16.03.06
Radial Blade Clearances, Compressor ........................................... 3.7-3360-9080/1-2 0404DE 1 1 13.03.06
Radial Blade Clearances, Turbine................................................... 3.7-3370-9080 0404DE 1 1 13.03.06
Casing
Tightening Horizontal Joint Bolts..................................................... 3.7-3430-9100 0799DE 1 1 23.02.06
Tightening Horizontal Joint Bolts..................................................... 3.7-3440-8100 0303DE 1 1 23.02.06
Vertical Joint Tightening Bolts ......................................................... 3.7-3450-9100 1199DE 1 1 23.02.06
Vertical Joint Tightening Bolts ......................................................... 3.7-3460-8100 0303DE 1 1 03.03.06
Grooves for Stator Blade Carriers ................................................... 3.7-3470-8100 0303DE 1 1 22.02.06
Outlet Stator Blade Ring, Stator Blade Carrier, Thrust-Shims......... 3.7-3480-9080 0404DE 1 1 22.02.06
Bearing Casing, Tightening Bolts .................................................... 3.7-3490-8100 0303DE 1 1 24.02.06
Class: RESTRICTED
1) Quantity
Siemens AG 3.7-3010-0612/1
Power Generation 0306E
to be
supplied
later
to be
supplied
later
Gas Turbine Information on Table of Contents
Test Records Inspection
Information
on the
Dear Customer,
Siemens AG 3.7-0105-0001
Power Generation 0405E
Gas Turbine Table of Contents
Test Records Minor Inspection
Test Records
General
Qty. 1)
Table of Contents, Minor Inspection .............................................. 3.7-0110-9080 0106E 1
Cover Sheet................................................................................... 3.7-0001-0001 1105DE 1
Replacement Parts Installed.......................................................... 3.7-0244-0001/1-3 0105DE 1
Blading
Compressor Blading, Designations................................................ 3.7-0143-0001/1-5 0500DE 1
Compressor Stator Blades (adjustable), Airfoil Check, Stage 0..... 3.7-0150-6000 0199DE 1
Compressor Rotor Blades, Airfoil Check ....................................... 3.7-0160-6000 0398DE 1
Turbine/Compressor, Radial Blade Clearances, Compressor ....... 3.7-0170-0001 0305DE 1
Turbine Stator Blades, Airfoil Check, Stage 1................................ 3.7-0180-9100 1200DE 1
Turbine Rotor Blades, Airfoil Check, Stage 1 ................................ 3.7-0190-9100 1200DE 1
Turbine Stator Blades, Blade Check, Stage 4 ............................... 3.7-0200-9000 1200DE 1
Turbine Rotor Blades, Airfoil Check, Stage 4 ................................ 3.7-0210-9100 1200DE 1
including rights created by patent grant or registration of
The reproduction, transmission or use of this document
Combustion Chamber
a utility model or design, are reserved
Annular Combustion Chamber, Charge Id. No. of Ceramic Tiles... 3.7-3540-9100/1-24 0205DE 1
Tightening Torques for Combustion Chamber Piping .................... 3.7-3550-9000/1-2 0304DE 1
Annular Combustion Chamber, Location of Ceramic Tiles ............ 3.7-0240-9100/1-45 0603DE 1
Annular Combustion Chamber, Tile Holder ................................... 3.7-0245-9100 1100DE 1
Annular Combustion Chamber, Visual Inspection, Heat Shields ... 3.7-0250-6000 0199DE 1
Annular Combustion Chamber, Visual Inspection, Mock-up .......... 3.7-0252-6000 0199DE 1
Annular Combust., Chamber, Finding classes, heat shield plates . 3.7-0255-9100/1-4 0305DE 1
Test Record Inlet Shell Plate Finding Classes, Inlet Shell Plate .... 3.7-0258-9100/1-9 0305DE 1
Annular Combust. Chamber, Visual Inspect., Burner Inserts......... 3.7-0260-6000 0199DE 1
Visual Inspektion Burner Axial/Diagonal swirlers HR3-burner........ 3.7-0270-0001 0103DE 1
Visual Inspektion Burner Axial/Diagonal swirlers H-burner ............ 3.7-0271-0001 0103DE 1
Ring-Brennkammer, Sichtkontrolle, Znder .................................. 3.7-0280-9000 0705DE 1
Operating Values
Checks Prior to and during Startup................................................ 3.7-1050-0001/1-4 1098DE 1
Operating Log................................................................................ 3.7-1070-9100/1-9 0205DE 1
Class: RESTRICTED
1) Quantity
Siemens AG 3.7-0110-9080
Power Generation 0106E
TAB-Sheet:
Construction Co.,LTD.
TAB-Sheet:
- Factory Assembly
2
Jebel Ali Power &
Desalination StationL- TAB-Sheet:
TAB-Sheet:
TAB-Sheet:
Operating and Maintenance
Documentation - Test Records Forms
Minor Inspection 5
Kennwort: Maschinen-/A-Nr.:
Job name: Serial/Order No.:
Baugruppe: Zeichnungs-Nr.: Index:
Design group: Drawing No.: Rev.:
8
p amb Umgebungsdruck
9 mbar
p amb Baromatic pressure
amb Umgebungstemp.
10 C
amb Ambient temp.
Relative Luftfeuchtigkeit
11 %
Relative humidity
Produzierte kWh
P GT whrend t p
12 kWh generated kWh
during tp
Gemessene Periode
tP fr P GT
s
13 Measured period
for P GT
24
Verdichterdruck und -temperatur / Compressor pressures and temperatures
Verdichtereintritts-
25 MBA11 CT101 VI 1 temperature
C
Compressor inlet
temperature
Verdichtereintritts-
26 MBA11 CT102 VI 2 temperature
C
Compressor inlet
temperature
Siemens AG 3.7-1070-9100/1
Power Generation 0205DE
Gasturbinen Gas Turbine Betriebsaufschreibungen
Protokoll Test Record Operating Log
Kennwort: Maschinen-/A-Nr.:
Job name: Serial/Order No.:
Baugruppe: Zeichnungs-Nr.: Index:
Design group: Drawing No.: Rev.:
31
32
33
korrigierte Turbinenaustrittstemperatur / Corrected turbine outlet temperature
Turbinenaustritts-
34
MBA26 CT101 AT 1 temperature
C
Turbine outlet
temperature
Turbinenaustritts-
35
MBA26 CT102 AT 1 temperature
C
Turbine outlet
temperature
Turbinenaustritts-
36
MBA26 CT103 AT 1 temperature
C
Turbine outlet
Temperature
Turbinenaustritts-
37
MBA26 CT104 AT 1 temperature
C
Turbine outlet
temperature
Turbinenaustritts-
38
MBA26 CT105 AT 1 temperature
C
Turbine outlet
temperature
Turbinenaustritts-
39
MBA26 CT106 AT 1 temperatur
C
Turbine outlet
temperature
Turbinenaustritts-
40
MBA26 CT107 AT 1 temperatur
C
Turbine outlet
temperature
Turbinenaustritts-
41
MBA26 CT108 AT 1 temperatur
C
Turbine outlet
temperature
Siemens AG 3.7-1070-9100/2
Power Generation 0205DE
Gasturbinen Gas Turbine Betriebsaufschreibungen
Protokoll Test Record Operating Log
Kennwort: Maschinen-/A-Nr.:
Job name: Serial/Order No.:
Baugruppe: Zeichnungs-Nr.: Index:
Design group: Drawing No.: Rev.:
Siemens AG 3.7-1070-9100/3
Power Generation 0205DE
Gasturbinen Gas Turbine Betriebsaufschreibungen
Protokoll Test Record Operating Log
Kennwort: Maschinen-/A-Nr.:
Job name: Serial/Order No.:
Baugruppe: Zeichnungs-Nr.: Index:
Design group: Drawing No.: Rev.:
60
61
Kesseleintritts-
62 MBR20CT111 TTII temperatur
C
Boiler inlet temperature
Kesseleintritts-
63 MBR20CT112 TTII temperatur
C
Boiler inlet temperature
Kesseleintritts-
64 MBR20CT113 TTII temperatur
C
Boiler inlet temperature
Kesseleintritts-
65 MBR20CT114 TTII temperatur
C
Boiler inlet temperature
Kesseleintritts-
66 MBR20CT115 TTII temperatur
C
Boiler inlet temperature
Kesseleintritts-
67 MBR20CT116 TTII temperatur
C
Boiler inlet temperature
Durchschnitts-
TTII
68 temperatur
C
Average Temperature
Schwingungen Turbine / Verdichter / Turbine / compressor vibrations
Gehuseschwingungen
MBD11 CY101
v eff Turbinenlager
MBD11 CY102 mm/s
69 Casing vibrations
turbine bearing
Gehuseschwingungen
MBD12 CY101 v eff Verdichterlager
70 MBD12 CY102 Casing vibrations mm/s
turbine bearing
Wellenschwingen
71 MBD11 CY111 Turbinenlager [Amplitude s max ]
m
...112 Shaft vibrations
turbine bearing [amplitude s max ]
Wellenschwingen
72 MBD12 CY111 Verdichterlager [Amplitude s max ]
m
...112 Shaft vibrations
turbine bearing [amplitude s max ]
73
74
Abteilung: Bearbeiter: Medatum: Gegenzeichnung:
Department: Prepared by: Date of test: Countersigned:
Siemens AG 3.7-1070-9100/4
Power Generation 0205DE
Gasturbinen Gas Turbine Betriebsaufschreibungen
Protokoll Test Record Operating Log
Kennwort: Maschinen-/A-Nr.:
Job name: Serial/Order No.:
Baugruppe: Zeichnungs-Nr.: Index:
Design group: Drawing No.: Rev.:
Heizlvorlaufme
89 MBN17 CF101 V H Vorl. Diff. kg/s
nge Diffusion
FO inlet flow
rate diffusion
Heizlrcklaufme
90 MBN51 CF101 V H Rckl. nge kg/s
FO return flow
rate
91 MBN25 CF101 V H Vorl. Vorm. Heizl-Vorlauf
Vormisch kg/s
FO inlet premix
92 MBN56 CT501 H Temperatur Bypass
FO temperatur bypass C
Siemens AG 3.7-1070-9100/5
Power Generation 0205DE
Gasturbinen Gas Turbine Betriebsaufschreibungen
Protokoll Test Record Operating Log
Kennwort: Maschinen-/A-Nr.:
Job name: Serial/Order No.:
Baugruppe: Zeichnungs-Nr.: Index:
Design group: Drawing No.: Rev.:
Heizgasmenge
100 MBP10 CF101 V nHG FG flow rate m3/min
HG-Druck
101 MBP10 CP102 p Menge FG pressure bar
HG-Temperatur
102 MBP10 CT101 Menge FG temperature C
Schmierlsystem MBV / Lube oil system MBV
105 p Lagerlzulaufdruck
MBV26 CP501 bar
p Bearing oil feed pressure
106 p Schmierlpumpendruck
MBV21 CP501 bar
p Lube oil boost pressure
107 p Anhebeldruck
MBV30 CP502 bar
p Jacking oil pressure
Schmierltanktemperatur
108 MBV10 CT101 C
Lube oil tank temperature
Lagerlzulauftemperatur
109 MBV26 CT101 C
Bearing oil feed temp.
l vor Khler
110 MBV23 CT511 C
Oil before cooler
l nach Khler
111 MBV23 CT512 C
Oil after cooler
Wasser vor Khler
112 MBV23 CT513 C
Water before cooler
Wasser nach Khler
113 MBV23 CT514 C
Water after cooler
114 p l vor Khler
MBV23 CP511 bar
p Oil before cooler
115 p l nach Khler
MBV23 CP512 bar
p Oil after cooler
Siemens AG 3.7-1070-9100/6
Power Generation 0205DE
Gasturbinen Gas Turbine Betriebsaufschreibungen
Protokoll Test Record Operating Log
Kennwort: Maschinen-/A-Nr.:
Job name: Serial/Order No.:
Baugruppe: Zeichnungs-Nr.: Index:
Design group: Drawing No.: Rev.:
Siemens AG 3.7-1070-9100/7
Power Generation 0205DE
Gasturbinen Gas Turbine Betriebsaufschreibungen
Protokoll Test Record Operating Log
Kennwort: Maschinen-/A-Nr.:
Job name: Serial/Order No.:
Baugruppe: Zeichnungs-Nr.: Index:
Design group: Drawing No.: Rev.:
Emissionen / Emissions
160 NOx ppm
161 CO ppm
164 O2 vol%
Siemens AG 3.7-1070-9100/8
Power Generation 0205DE
Bestimmung der Temperaturgrenzwerte
Gasturbinen Gas Turbine an Turbinenaustritt und Abgaskanal
Protokoll Test Record Determination of Temperature Limits
at Turbine Outlet and Exhaust Duct
Kennwort: Maschinen-/A-Nr.:
Job name: Serial/Order No.:
No Tag Number Parameter Unit
Nr. KKS Parameter Einheit
date and time of test:
1 Datum und Uhrzeit der Messung:
simple or combined cycle
2 Solobetrieb oder Kombibetrieb
load
3 Last
fuel
4 Brennstoff
premix or diffusion mode
5 Vormisch- oder Diffusionsbetrieb
water or steam injection
6 Wasser- oder Dampfeindsung
turbine inlet temperature (ISO) appr.
7 TI Turbineneintrittstemperatur (ISO) ca. C
IGV Position
8 MBA11 CG101 Stellung Vorleitgitter %
speed
9 MBA10 CS101 N Drehzahl rpm
ambient pressure
10 p AMB Umgebungsdruck mbar
compressor inlet temperature 1
11 MBA11 CT101 CI1 Verdichtereintrittstemperatur 1 C
compressor inlet temperature 2
12 MBA11 CT102 CI2 Verdichtereintrittstemperatur 2 C
compressor inlet temperature 3
13 MBA11 CT103 CI3 Verdichtereintrittstemperatur 3 C
compressor inlet temperature 4
14 MBA11 CT104 CI4 Verdichtereintrittstemperatur 4 C
compressor inlet temperature, average of 4
15 CI Verdichtereintrittstemperatur, Mittel aus 4 C
H2O injection mass flow
16 M H2O Massenstrom H2O Einspritzung kg/s
compressor outlet gauge pressure
17 MBA12 CP101 PE CO Verdichteraustrittsdruck (Anzeige) bar
combustion chamber pressure difference
18 MBM10 CP101 DP CBC Druckdifferenz Brennkammer mbar
generator output, indication
19 MKA01 CE003 P GTm Generatorleistung, Anzeige MW
generator output, kWh/powermeter for comparision
20 P GTm Generatorleistung, kWh/Leistungsmesser zum MW
Vergleich
generator output acc 3.1-0120-0334 dated 0797E
21 P GT Generatorleistung entspr. 3.1-0120-0334 Ausgabe MW
0797E
generator output from diagram, corrected
22 P GTcorr Generatorleistung aus Diagramm, korrigiert MW
turbine outlet temperature, control & protection
23 MBA26 CT101 TO1 Turbinenaustrittstemperatur, Regelung & Schutz C
turbine outlet temperature, control & protection
24 MBA26 CT102 TO2 Turbinenaustrittstemperatur, Regelung & Schutz C
Siemens AG 3.7-1110-9000/1
Power Generation 0398DE
Bestimmung der Temperaturgrenzwerte
Gasturbinen Gas Turbine an Turbinenaustritt und Abgaskanal
Protokoll Test Record Determination of Temperature Limits
at Turbine Outlet and Exhaust Duct
Kennwort: Maschinen-/A-Nr.:
Job name: Serial/Order No.:
Siemens AG 3.7-1110-9000/2
Power Generation 0398DE
Bestimmung der Temperaturgrenzwerte
Gasturbinen Gas Turbine an Turbinenaustritt und Abgaskanal
Protokoll Test Record Determination of Temperature Limits
at Turbine Outlet and Exhaust Duct
Kennwort: Maschinen-/A-Nr.:
Job name: Serial/Order No.:
Siemens AG 3.7-1110-9000/3
Power Generation 0398DE
Bestimmung der Temperaturgrenzwerte
Gasturbinen Gas Turbine an Turbinenaustritt und Abgaskanal
Protokoll Test Record Determination of Temperature Limits
at Turbine Outlet and Exhaust Duct
Kennwort: Maschinen-/A-Nr.:
Job name: Serial/Order No.:
Temperatures for Warning and Trip (Total Fuel High) at New Setting **
Temperaturwerte fr Warnmeldung und Schnellschlu (Gesamtbrennstoffmenge zu gro) bei neuer Einstellung **
turbine outlet temperature 1 warning
70 MBA26 CT101 TO1 Turbinenaustrittstemperatur 1 Warnung C
turbine outlet temperature 5 warning
71 MBA26 CT105 TO5 Turbinenaustrittstemperatur 5 Warnung C
turbine outlet temperature 9 warning
72 MBA26 CT109 TO9 Turbinenaustrittstemperatur 9 Warnung C
turbine outlet temperature 13 warning
73 MBA26 CT113 TO13 Turbinenaustrittstemperatur 13 Warnung C
turbine outlet temperature 17 warning
74 MBA26 CT117 TO17 Turbinenaustrittstemperatur 17 Warnung C
turbine outlet temperature 21 warning
75 MBA26 CT121 TO21 Turbinenaustrittstemperatur 21 Warnung C
turbine outlet temperature 1 trip
76 MBA26 CT101 TO1 Turbinenaustrittstemperatur 1 Schnellschlu C
turbine outlet temperature 5 trip
77 MBA26 CT105 TO5 Turbinenaustrittstemperatur 5 Schnellschlu C
turbine outlet temperature 9 trip
78 MBA26 CT109 TO9 Turbinenaustrittstemperatur 9 Schnellschlu C
turbine outlet temperature 13 trip
79 MBA26 CT113 TO13 Turbinenaustrittstemperatur 13 Schnellschlu C
turbine outlet temperature 17 trip
80 MBA26 CT117 TO17 Turbinenaustrittstemperatur 17 Schnellschlu C
turbine outlet temperature 21 trip
81 MBA26 CT121 TO21 Turbinenaustrittstemperatur 21 Schnellschlu C
* DJ = -(PGTm-PGTcorr)/PGTcorr*390K
600
Temperatur / Temperature C
590
580
570
560
550
540
530
520
510
500
TO10
TO11
TO12
TO13
TO14
TO15
TO16
TO17
TO18
TO19
TO20
TO21
TO22
TO23
TO24
TO1
TO2
TO3
TO4
TO5
TO6
TO7
TO8
TO9
# Num m ern der Therm oelem ente am Turbinenaustritt / # Therm ocouple at turbine outlet
Siemens AG 3.7-1110-9000/4
Power Generation 0398DE
to be
supplied
later
to be
supplied
later
to be
supplied
later
to be
supplied
later
to be
supplied
later
to be
supplied
later
to be
supplied
later
to be
supplied
later
Gas Turbine Notes Regarding the Preliminary Edition
General User Information of the Manual
This is the preliminary edition of the manual, i.e. this documentation for outsourced parts is included in this
manual contains sections that are specific to the GT model chapter. At present, the documentation for outsourced
but do not necessarily reflect the design details of the plant parts is oriented toward a standard version of the GT
as installed. This is because the final, customer-specific model. Some outsourced parts documents therefore may
design had not been finalized at the time this manual was not correspond to the components installed in your plant.
compiled. Furthermore, the latest design changes are In general, the preliminary edition of the manual is not
implemented in the GT on site during commissioning updated. Instead, updates are incorporated into the final
(whenever possible). edition of the manual, which replaces the preliminary
Experience has shown that the documentation for edition. A preliminary edition of the records (Chapter 3.7) is
outsourced parts is only available in its entirety near the not provided, i.e. all records provided are integral
end of the project. Consequently, not all of the components of the final edition of the manual.
The reproduction, transmission or use of this document
or its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of
a utility model or design, are reserved Class: RESTRICTED
Siemens AG 3.9-0004-0001
Power Generation 0104E-Y
Gas Turbine General
General User Information
Danger!
Danger of injury and equipment damage: Read and
observe the general safety notices in section
3.0-0500.
First read the chapter "safety notices" (if
provided) of the respective vendor documentation.
Read and observe as well all other safety notices
given in the vendor documentation.
The reproduction, transmission or use of this document
or its content is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of
Notice:
Please order spare parts using the designations
given in the spare part catalog 3.6.
By using designations of vendor documents,
a utility model or design, are reserved
Siemens AG 3.9-0005-0001
Power Generation 0104E-Y
Gas Turbine Notes on the Use of the Manual
General User Information
This is exemplified using a representative section taken from a 3.9 Table of Contents:
Unter-
KKS Description Manufacturer Type Tab
reg
Siemens AG 3.9-0006-0001/1
Power Generation 1205E-Y
Gas Turbine Notes on the Use of the Manual
General User Information
It is thus possible, for example, to use the information The page number is also indicated in the case of one-
stated in the table above to see that the first KKS number page documents. Numbering the pages of each section
stated in the 3.9 Table of Contents, CUH01, corresponds always starts with 1, i.e., the pages of the manual are not
with document numbers 3.9.1-0677-0001/1-11 and index numbered sequentially.
0699DE in the 3.0 Table of Contents. Both of these entries The date of issue is located directly below the
are associated with the combination Tab number 2 identification number (here: 0801). This is followed by a
Subtab number 2. Additionally the 3.0 Table of Contents one-letter language code (e.g., 0801E for English) except
indicates which binder the document is filed in. In this case: in the case of the German version. The language code is
the binder with the number 11.MB.TP3.09+. This number is followed by an internal key that may contain -X, -Y or be
affixed to the spine of the binder. blank.
Because outside vendor documentation is filed in
several binders, each binder contains the table of contents.
The label on the spine indicates not only the binder
Identification Coding of Outside Vendor
number, but also which KKS numbers are filed in that Documentation
binder. For example, MB+CUH are stored in binder A document number is also assigned by Siemens to
11.MB.TP3.09+. Each tab is associated with a specific documentation pertaining to outside vendor parts, for
KKS group. In the example given here, reference is made example:
to Tab 2 of KKS group CUHCabinets for Output
Adjusters. If the documentation for a KKS group spans 3.9.1-0677-0001 /1-11
content is not permitted without express written authority.
several binders, only the first binder includes a divider for 0699DE
Page number
the (main) tab code. within the section
Content Code The document number is not stated in the 3.9 Table of
Contents (3.9-0010), instead appears only in the
The content code comprises the number of the manual Comprehensive Table of Contents (3.0-0010), c.f. section:
section (in this case 3.9) and a Structure of Outside Vendor Documentation. In addition, it
4-digit serial number (here: 0006). This is indicated at the is used as an identifier in the List of Revised and New
or design, are reserved.
margin in the footer of each page, as it is in this section. Pages (see Section "Supplements").
3.9-0006
Supplements
For the user of the manual, the content code is a
sufficiently-precise identifying characteristic for a particular The gas turbine manuals are updated by supplements
section. consisting of new or revised sections. All updates received
For organizational reasons, not every content code is by the user of the manual supersede previous editions and
used and there may be gaps between the content codes of must be filed immediately and complied with.
adjacent sections. Furthermore, an ascending sequence of Each supplement includes a List of Revised and New
content code numbers cannot always be ensured in the 3.0 Pages (3.0-0014) indicating which manual sections or
comprehensive table of contents. While the ascending pages or outside vendor documents must be removed,
sequence of 3.9 documents is usually uninterrupted in the added or replaced.
first issue, gaps may occur when the documentation
package is revised at a later time.
Reordering Manual Sections and Outside
Vendor Documents
Identification Number
The section number is insufficient for reordering
The identification number consists of the content code sections. Please indicate the desired number of copies, the
and supplementary data, e.g. identification number and the date of publication together
3.9-0006-0001 /1 with the language code, e.g.
0801E-X 3 copies 3.9-0006-0001 0801E
Page number
within the section
Class: RESTRICTED
Siemens AG 3.9-0006-0001/2
Power Generation 1205E-Y
Gas Turbine Notes on the Use of the Manual
General User Information
Siemens AG 3.9-0006-0001/3
Power Generation 1205E-Y
Gas Turbine Table of Contents
General User Information Preliminary Edition
Note:
This Table of Contents lists only those KKS identifiers that require a manual. Parts manufactured directly by Power
Generation are described in Chapter 3.1 Description. No manuals are included for standard parts, i. e. manually-
actuated shutoff valves.
Siemens AG 3.9-0010-0592/1
Power Generation 0206E-X
Gas Turbine Table of Contents
General User Information Preliminary Edition
Siemens AG 3.9-0010-0592/2
Power Generation 0206E-X
Gas Turbine Table of Contents
General User Information Preliminary Edition
Siemens AG 3.9-0010-0592/3
Power Generation 0206E-X
Gas Turbine Table of Contents
General User Information Preliminary Edition
Siemens AG 3.9-0010-0592/4
Power Generation 0206E-X
Gas Turbine Table of Contents
General User Information Preliminary Edition
FUCHS
MBD Bearing 4
MBD11CY101-B01 Piezoelectric Accelerometer VIBROMETER CA 201 4 3
a utility model or design, are reserved
Siemens AG 3.9-0010-0592/5
Power Generation 0206E-X
Gas Turbine Table of Contents
General User Information Preliminary Edition
Siemens AG 3.9-0010-0592/6
Power Generation 0206E-X
Gas Turbine Table of Contents
General User Information Preliminary Edition
Siemens AG 3.9-0010-0592/7
Power Generation 0206E-X
Gas Turbine Table of Contents
General User Information Preliminary Edition
Siemens AG 3.9-0010-0592/8
Power Generation 0206E-X
Gas Turbine Table of Contents
General User Information Preliminary Edition
SO115
MBV35AA201 Check Valve REXROTH M-SR 8 KE00-1X/V 8 1
Siemens AG 3.9-0010-0592/9
Power Generation 0206E-X
Gas Turbine Table of Contents
General User Information Preliminary Edition
AUTOMATION
MBX93AA001KA01 Solenoid Valve REXROTH 581 417 100 0 9 2
MBX93AA001-Y01 Solenoid Valve REXROTH COIL 9 2
MBX93AS001 Pneumatic Cylinder Actuator NELES- B1 C Y U 17/55 9 1
a utility model or design, are reserved
AUTOMATION
Class: RESTRICTED
Siemens AG 3.9-0010-0592/10
Power Generation 0206E-X
3.9.1-0676-0003/1
1004E
3.9.1-0676-0003/2
1004E
3.9.1-0676-0003/3
1004E
3.9.1-0676-0003/4
1004E
3.9.1-0676-0003/5
1004E
3.9.1-0676-0003/6
1004E
3.9.1-0676-0003/7
1004E
3.9.1-0676-0003/8
1004E
3.9.1-0676-0003/9
1004E
3.9.1-0676-0003/10
1004E
3.9.1-0676-0003/11
1004E
3.9.1-0676-0003/12
1004E
3.9.1-0676-0003/13
1004E
3.9.1-0676-0003/14
1004E
3.9.1-0676-0003/15
1004E
3.9.1-0676-0003/16
1004E
3.9.1-0676-0003/17
1004E
3.9.1-0676-0003/18
1004E
3.9.1-0676-0003/19
1004E
3.9.1-0676-0003/20
1004E
3.9.1-0676-0003/21
1004E
3.9.1-0676-0003/22
1004E
3.9.1-0676-0003/23
1004E
3.9.1-0676-0003/24
1004E
3.9.1-0676-0003/25
1004E
3.9.1-0676-0003/26
1004E
3.9.1-0676-0003/27
1004E
3.9.1-0676-0003/28
1004E
3.9.1-0676-0003/29
1004E
3.9.1-0676-0003/30
1004E
3.9.1-0676-0003/31
1004E
3.9.1-0676-0003/32
1004E
3.9.1-0676-0003/33
1004E
3.9.1-0676-0003/34
1004E
3.9.1-0676-0003/35
1004E
3.9.1-0676-0003/36
1004E
3.9.1-0676-0003/37
1004E
3.9.1-0676-0003/38
1004E
3.9.1-0676-0003/39
1004E
3.9.1-0676-0003/40
1004E
3.9.1-0676-0003/41
1004E
3.9.1-0676-0003/42
1004E
3.9.1-0676-0003/43
1004E
3.9.1-0676-0003/44
1004E
3.9.1-0676-0003/45
1004E
3.9.1-0676-0003/46
1004E
3.9.1-0676-0003/47
1004E
3.9.1-0676-0003/48
1004E
3.9.1-0676-0003/49
1004E
3.9.1-0676-0003/50
1004E
3.9.1-0676-0003/51
1004E
3.9.1-0676-0003/52
1004E
3.9.1-0676-0003/53
1004E
3.9.1-0676-0003/54
1004E
3.9.1-0676-0003/55
1004E
3.9.1-0676-0003/56
1004E
3.9.1-0676-0003/57
1004E
3.9.1-0676-0003/58
1004E
3.9.1-0676-0003/59
1004E
3.9.1-0676-0003/60
1004E
3.9.1-0676-0003/61
1004E
3.9.1-0676-0003/62
1004E
3.9.1-0676-0003/63
1004E
3.9.1-0676-0003/64
1004E
3.9.1-0676-0003/65
1004E
3.9.1-0676-0003/66
1004E
3.9.1-0676-0003/67
1004E
3.9.1-0676-0003/68
1004E
3.9.1-0676-0003/69
1004E
3.9.1-0676-0003/70
1004E
3.9.1-0676-0003/71
1004E
3.9.1-0676-0003/72
1004E
3.9.1-0676-0003/73
1004E
3.9.1-0676-0003/74
1004E
3.9.1-0676-0003/75
1004E
3.9.1-0676-0003/76
1004E
3.9.1-0676-0003/77
1004E
3.9.1-0676-0003/78
1004E
3.9.1-0676-0003/79
1004E
3.9.1-0676-0003/80
1004E
3.9.1-0676-0003/81
1004E
3.9.1-0676-0003/82
1004E
3.9.1-0676-0003/83
1004E
3.9.1-0676-0003/84
1004E
3.9.1-0676-0003/85
1004E
3.9.1-0904-0002/1
0201E
3.9.1-0904-0002/2
0201E
3.9.1-0904-0002/3
0201E
3.9.1-0904-0002/4
0201E
3.9.1-0904-0002/5
0201E
3.9.1-0904-0002/6
0201E
3.9.1-0904-0002/7
0201E
3.9.1-0904-0002/8
0201E
3.9.1-0904-0002/9
0201E
3.9.1-0904-0002/10
0201E
3.9.1-0904-0002/11
0201E
3.9.1-0904-0002/12
0201E
3.9.1-0904-0002/13
0201E
3.9.1-0904-0002/14
0201E
3.9.1-0904-0002/15
0201E
3.9.1-0904-0002/16
0201E
3.9.1-0904-0002/17
0201E
3.9.1-0904-0002/18
0201E
3.9.1-0904-0002/19
0201E
3.9.1-0904-0002/20
0201E
3.9.1-0904-0002/21
0201E
3.9.1-0904-0002/22
0201E
3.9.1-0904-0002/23
0201E
3.9.1-0904-0002/24
0201E
3.9.1-0904-0002/25
0201E
3.9.1-0904-0002/26
0201E
3.9.1-0904-0002/27
0201E
3.9.1-0904-0002/28
0201E
3.9.1-0904-0002/29
0201E
3.9.1-0904-0002/30
0201E
3.9.1-0904-0002/31
0201E
3.9.1-0904-0002/32
0201E
3.9.1-0904-0002/33
0201E
3.9.1-1094-0002/1
1204E
3.9.1-1094-0002/2
1204E
3.9.1-1094-0002/3
1204E
3.9.1-1094-0002/4
1204E
3.9.1-1094-0002/5
1204E
3.9.1-1094-0002/6
1204E
3.9.1-1095-0001/1
1203E
3.9.1-1095-0001/2
1203E
3.9.1-1095-0001/3
1203E
3.9.1-1095-0001/4
1203E
3.9.1-1095-0001/5
1203E
3.9.1-1095-0001/6
1203E
3.9.1-1095-0001/7
1203E
3.9.1-1095-0001/8
1203E
3.9.1-1095-0001/9
1203E
3.9.1-1095-0001/10
1203E
3.9.1-1095-0001/11
1203E
3.9.1-1095-0001/12
1203E
3.9.1-1095-0001/13
1203E
Technical Customer Documentation
- Tab 2 7
3.9.1-1096-0001/1
0301E
3.9.1-1096-0001/2
0301E
3.9.1-1096-0001/3
0301E
3.9.1-1096-0001/4
0301E
3.9.1-1096-0001/5
0301E
3.9.1-1096-0001/6
0301E
3.9.1-1096-0001/7
0301E
3.9.1-1096-0001/8
0301E
3.9.1-1096-0001/9
0301E
3.9.1-1096-0001/10
0301E
3.9.1-1096-0001/11
0301E
3.9.1-1096-0001/12
0301E
3.9.1-1096-0001/13
0301E
3.9.1-0081-0006/1
0101E
3.9.1-0081-0006/2
0101E
3.9.1-0081-0006/3
0101E
3.9.1-0081-0006/4
0101E
3.9.1-0081-0006/5
0101E
3.9.1-0081-0006/6
0101E
3.9.1-0081-0006/7
0101E
3.9.1-0081-0006/8
0101E
3.9.1-0081-0006/9
0101E
3.9.1-0081-0006/10
0101E
3.9.1-0081-0006/11
0101E
3.9.1-0081-0006/12
0101E
3.9.1-0081-0006/13
0101E
3.9.1-0081-0006/14
0101E
3.9.1-0081-0006/15
0101E
3.9.1-0081-0006/16
0101E
3.9.1-0081-0006/17
0101E
3.9.1-0081-0006/18
0101E
3.9.1-0081-0006/19
0101E
3.9.1-0081-0006/20
0101E
3.9.1-0081-0006/21
0101E
3.9.1-0081-0006/22
0101E
3.9.1-0081-0006/23
0101E
3.9.1-0081-0006/24
0101E
3.9.1-0128-0003/1
0899E
3.9.1-0128-0003/2
0899E
3.9.1-0128-0003/3
0899E
3.9.1-0128-0003/4
0899E
3.9.1-0128-0003/5
0899E
3.9.1-0128-0003/6
0899E
3.9.1-0128-0003/7
0899E
3.9.1-0128-0003/8
0899E
3.9.1-0128-0003/9
0899E
3.9.1-0128-0003/10
0899E
3.9.1-0128-0003/11
0899E
3.9.1-0128-0003/12
0899E
3.9.1-0128-0003/13
0899E
3.9.1-0128-0003/14
0899E
3.9.1-0128-0003/15
0899E
3.9.1-0128-0003/16
0899E
3.9.1-0128-0003/17
0899E
3.9.1-0128-0003/18
0899E
3.9.1-0128-0003/19
0899E
3.9.1-0128-0003/20
0899E
3.9.1-0128-0003/21
0899E
3.9.1-0128-0003/22
0899E
3.9.1-0128-0003/23
0899E
3.9.1-0128-0003/24
0899E
3.9.1-0128-0003/25
0899E
3.9.1-0128-0003/26
0899E
3.9.1-0128-0003/27
0899E
3.9.1-0128-0003/28
0899E
3.9.1-0128-0003/29
0899E
3.9.1-0128-0003/30
0899E
3.9.1-0128-0003/31
0899E
3.9.1-0128-0003/32
0899E
3.9.1-0128-0003/33
0899E
3.9.1-0128-0003/34
0899E
3.9.1-0128-0003/35
0899E
3.9.1-0128-0003/36
0899E
3.9.1-0128-0003/37
0899E
3.9.1-0128-0003/38
0899E
3.9.1-0128-0003/39
0899E
3.9.1-0128-0003/40
0899E
3.9.1-0128-0003/41
0899E
3.9.1-0128-0003/42
0899E
3.9.1-0128-0003/43
0899E
3.9.1-0128-0003/44
0899E
3.9.1-0128-0003/45
0899E
3.9.1-0128-0003/46
0899E
3.9.1-0128-0003/47
0899E
3.9.1-0128-0003/48
0899E
3.9.1-0128-0003/49
0899E
3.9.1-0128-0003/50
0899E
3.9.1-0128-0003/51
0899E
3.9.1-0128-0003/52
0899E
3.9.1-0128-0003/53
0899E
3.9.1-0128-0003/54
0899E
3.9.1-0128-0003/55
0899E
3.9.1-0128-0003/56
0899E
3.9.1-0128-0003/57
0899E
3.9.1-0128-0003/58
0899E
3.9.1-0128-0003/59
0899E
3.9.1-0128-0003/60
0899E
3.9.1-0128-0003/61
0899E
3.9.1-0128-0003/62
0899E
3.9.1-0128-0003/63
0899E
3.9.1-0128-0003/64
0899E
3.9.1-0128-0003/65
0899E
3.9.1-0128-0003/66
0899E
3.9.1-0128-0003/67
0899E
3.9.1-0128-0003/68
0899E
3.9.1-0128-0003/69
0899E
3.9.1-0128-0003/70
0899E
3.9.1-0128-0003/71
0899E
3.9.1-0128-0003/72
0899E
3.9.1-0128-0003/73
0899E
3.9.1-0128-0003/74
0899E
3.9.1-0128-0003/75
0899E
3.9.1-0128-0003/76
0899E
3.9.1-0128-0003/77
0899E
3.9.1-0128-0003/78
0899E
3.9.1-0128-0003/79
0899E
3.9.1-0128-0003/80
0899E
3.9.1-0128-0003/81
0899E
3.9.1-0128-0003/82
0899E
3.9.1-0128-0003/83
0899E
3.9.1-0128-0003/84
0899E
3.9.1-0128-0003/85
0899E
3.9.1-0128-0003/86
0899E
3.9.1-0128-0003/87
0899E
3.9.1-0128-0003/88
0899E
3.9.1-0128-0003/89
0899E
3.9.1-0128-0003/90
0899E
3.9.1-0128-0003/91
0899E
3.9.1-0128-0003/92
0899E
3.9.1-0128-0003/93
0899E
3.9.1-0128-0003/94
0899E
3.9.1-0128-0003/95
0899E
3.9.1-0128-0003/96
0899E
3.9.1-0128-0003/97
0899E
3.9.1-0128-0003/98
0899E
3.9.1-0128-0003/99
0899E
3.9.1-0128-0003/100
0899E
3.9.1-0128-0003/101
0899E
3.9.1-0128-0003/102
0899E
3.9.1-0128-0003/103
0899E
3.9.1-0128-0003/104
0899E
3.9.1-0128-0003/105
0899E
3.9.1-0128-0003/106
0899E
3.9.1-0128-0003/107
0899E
3.9.1-0128-0003/108
0899E
3.9.1-0128-0003/109
0899E
3.9.1-0128-0003/110
0899E
3.9.1-0128-0003/111
0899E
3.9.1-0128-0003/112
0899E
3.9.1-0128-0003/113
0899E
3.9.1-0128-0003/114
0899E
3.9.1-0128-0003/115
0899E
3.9.1-0128-0003/116
0899E
3.9.1-0128-0003/117
0899E
3.9.1-0128-0003/118
0899E
3.9.1-0128-0003/119
0899E
3.9.1-0128-0003/120
0899E
3.9.1-0128-0003/121
0899E
3.9.1-0128-0003/122
0899E
3.9.1-0128-0003/123
0899E
3.9.1-0128-0003/124
0899E
3.9.1-0128-0003/125
0899E
3.9.1-0128-0003/126
0899E
3.9.1-0128-0003/127
0899E
3.9.1-0128-0003/128
0899E
3.9.1-0128-0003/129
0899E
3.9.1-0128-0003/130
0899E
3.9.1-0128-0003/131
0899E
3.9.1-0128-0003/132
0899E
3.9.1-0128-0003/133
0899E
3.9.1-0128-0003/134
0899E
3.9.1-0128-0003/135
0899E
3.9.1-0128-0003/136
0899E
3.9.1-0128-0003/137
0899E
3.9.1-0128-0003/138
0899E
3.9.1-0128-0003/139
0899E
3.9.1-0128-0003/140
0899E
3.9.1-0128-0003/141
0899E
3.9.1-0128-0003/142
0899E
3.9.1-0128-0003/143
0899E
3.9.1-0128-0003/144
0899E
3.9.1-0128-0003/145
0899E
3.9.1-0128-0003/146
0899E
3.9.1-0128-0003/147
0899E
3.9.1-0128-0003/148
0899E
3.9.1-0128-0003/149
0899E
3.9.1-0128-0003/150
0899E
3.9.1-0128-0003/151
0899E
3.9.1-0128-0003/152
0899E
3.9.1-0128-0003/153
0899E
3.9.1-0128-0003/154
0899E
3.9.1-0128-0003/155
0899E
3.9.1-0128-0003/156
0899E
3.9.1-0128-0003/157
0899E
3.9.1-0128-0003/158
0899E
3.9.1-0421-0002/1
0803E
3.9.1-0421-0002/2
0803E
3.9.1-0421-0002/3
0803E
3.9.1-0421-0002/4
0803E
3.9.1-0421-0002/5
0803E
3.9.1-0421-0002/6
0803E
3.9.1-0421-0002/7
0803E
3.9.1-0421-0002/8
0803E
3.9.1-0967-0003/1
0502E
3.9.1-0967-0003/2
0502E
3.9.1-0967-0003/3
0502E
3.9.1-0967-0003/4
0502E
3.9.1-0967-0003/5
0502E
3.9.1-0967-0003/6
0502E
3.9.1-0967-0003/7
0502E
3.9.1-0967-0003/8
0502E
3.9.1-0967-0003/9
0502E
3.9.1-0967-0003/10
0502E
3.9.1-0967-0003/11
0502E
3.9.1-0967-0003/12
0502E
3.9.1-0967-0003/13
0502E
3.9.1-0967-0003/14
0502E
3.9.1-0967-0003/15
0502E
3.9.1-0967-0003/16
0502E
3.9.1-0967-0003/17
0502E
3.9.1-0967-0003/18
0502E
3.9.1-0967-0003/19
0502E
3.9.1-0967-0003/20
0502E
3.9.1-0967-0003/21
0502E
3.9.1-0967-0003/22
0502E
3.9.1-0967-0003/23
0502E
3.9.1-0967-0003/24
0502E
3.9.1-0967-0003/25
0502E
3.9.1-0967-0003/26
0502E
3.9.1-0967-0003/27
0502E
3.9.1-0967-0003/28
0502E
3.9.1-1036-0001/1
1104E
3.9.1-1037-0001/1
1104E
3.9.1-1102-0001/1
0303E
3.9.1-1160-0001/1
1004E
3.9.1-1160-0001/2
1004E
3.9.1-1160-0001/3
1004E
3.9.1-1160-0001/4
1004E
3.9.1-1252-0001/1
1205E
3.9.1-1254-0001/1
1205DE
3.9.1-1254-0001/2
1205DE
3.9.1-1255-0001/1
1205DE
3.9.1-1255-0001/2
1205DE
3.9.1-0128-0003/1
0899E
3.9.1-0128-0003/2
0899E
3.9.1-0128-0003/3
0899E
3.9.1-0128-0003/4
0899E
3.9.1-0128-0003/5
0899E
3.9.1-0128-0003/6
0899E
3.9.1-0128-0003/7
0899E
3.9.1-0128-0003/8
0899E
3.9.1-0128-0003/9
0899E
3.9.1-0128-0003/10
0899E
3.9.1-0128-0003/11
0899E
3.9.1-0128-0003/12
0899E
3.9.1-0128-0003/13
0899E
3.9.1-0128-0003/14
0899E
3.9.1-0128-0003/15
0899E
3.9.1-0128-0003/16
0899E
3.9.1-0128-0003/17
0899E
3.9.1-0128-0003/18
0899E
3.9.1-0128-0003/19
0899E
3.9.1-0128-0003/20
0899E
3.9.1-0128-0003/21
0899E
3.9.1-0128-0003/22
0899E
3.9.1-0128-0003/23
0899E
3.9.1-0128-0003/24
0899E
3.9.1-0128-0003/25
0899E
3.9.1-0128-0003/26
0899E
3.9.1-0128-0003/27
0899E
3.9.1-0128-0003/28
0899E
3.9.1-0128-0003/29
0899E
3.9.1-0128-0003/30
0899E
3.9.1-0128-0003/31
0899E
3.9.1-0128-0003/32
0899E
3.9.1-0128-0003/33
0899E
3.9.1-0128-0003/34
0899E
3.9.1-0128-0003/35
0899E
3.9.1-0128-0003/36
0899E
3.9.1-0128-0003/37
0899E
3.9.1-0128-0003/38
0899E
3.9.1-0128-0003/39
0899E
3.9.1-0128-0003/40
0899E
3.9.1-0128-0003/41
0899E
3.9.1-0128-0003/42
0899E
3.9.1-0128-0003/43
0899E
3.9.1-0128-0003/44
0899E
3.9.1-0128-0003/45
0899E
3.9.1-0128-0003/46
0899E
3.9.1-0128-0003/47
0899E
3.9.1-0128-0003/48
0899E
3.9.1-0128-0003/49
0899E
3.9.1-0128-0003/50
0899E
3.9.1-0128-0003/51
0899E
3.9.1-0128-0003/52
0899E
3.9.1-0128-0003/53
0899E
3.9.1-0128-0003/54
0899E
3.9.1-0128-0003/55
0899E
3.9.1-0128-0003/56
0899E
3.9.1-0128-0003/57
0899E
3.9.1-0128-0003/58
0899E
3.9.1-0128-0003/59
0899E
3.9.1-0128-0003/60
0899E
3.9.1-0128-0003/61
0899E
3.9.1-0128-0003/62
0899E
3.9.1-0128-0003/63
0899E
3.9.1-0128-0003/64
0899E
3.9.1-0128-0003/65
0899E
3.9.1-0128-0003/66
0899E
3.9.1-0128-0003/67
0899E
3.9.1-0128-0003/68
0899E
3.9.1-0128-0003/69
0899E
3.9.1-0128-0003/70
0899E
3.9.1-0128-0003/71
0899E
3.9.1-0128-0003/72
0899E
3.9.1-0128-0003/73
0899E
3.9.1-0128-0003/74
0899E
3.9.1-0128-0003/75
0899E
3.9.1-0128-0003/76
0899E
3.9.1-0128-0003/77
0899E
3.9.1-0128-0003/78
0899E
3.9.1-0128-0003/79
0899E
3.9.1-0128-0003/80
0899E
3.9.1-0128-0003/81
0899E
3.9.1-0128-0003/82
0899E
3.9.1-0128-0003/83
0899E
3.9.1-0128-0003/84
0899E
3.9.1-0128-0003/85
0899E
3.9.1-0128-0003/86
0899E
3.9.1-0128-0003/87
0899E
3.9.1-0128-0003/88
0899E
3.9.1-0128-0003/89
0899E
3.9.1-0128-0003/90
0899E
3.9.1-0128-0003/91
0899E
3.9.1-0128-0003/92
0899E
3.9.1-0128-0003/93
0899E
3.9.1-0128-0003/94
0899E
3.9.1-0128-0003/95
0899E
3.9.1-0128-0003/96
0899E
3.9.1-0128-0003/97
0899E
3.9.1-0128-0003/98
0899E
3.9.1-0128-0003/99
0899E
3.9.1-0128-0003/100
0899E
3.9.1-0128-0003/101
0899E
3.9.1-0128-0003/102
0899E
3.9.1-0128-0003/103
0899E
3.9.1-0128-0003/104
0899E
3.9.1-0128-0003/105
0899E
3.9.1-0128-0003/106
0899E
3.9.1-0128-0003/107
0899E
3.9.1-0128-0003/108
0899E
3.9.1-0128-0003/109
0899E
3.9.1-0128-0003/110
0899E
3.9.1-0128-0003/111
0899E
3.9.1-0128-0003/112
0899E
3.9.1-0128-0003/113
0899E
3.9.1-0128-0003/114
0899E
3.9.1-0128-0003/115
0899E
3.9.1-0128-0003/116
0899E
3.9.1-0128-0003/117
0899E
3.9.1-0128-0003/118
0899E
3.9.1-0128-0003/119
0899E
3.9.1-0128-0003/120
0899E
3.9.1-0128-0003/121
0899E
3.9.1-0128-0003/122
0899E
3.9.1-0128-0003/123
0899E
3.9.1-0128-0003/124
0899E
3.9.1-0128-0003/125
0899E
3.9.1-0128-0003/126
0899E
3.9.1-0128-0003/127
0899E
3.9.1-0128-0003/128
0899E
3.9.1-0128-0003/129
0899E
3.9.1-0128-0003/130
0899E
3.9.1-0128-0003/131
0899E
3.9.1-0128-0003/132
0899E
3.9.1-0128-0003/133
0899E
3.9.1-0128-0003/134
0899E
3.9.1-0128-0003/135
0899E
3.9.1-0128-0003/136
0899E
3.9.1-0128-0003/137
0899E
3.9.1-0128-0003/138
0899E
3.9.1-0128-0003/139
0899E
3.9.1-0128-0003/140
0899E
3.9.1-0128-0003/141
0899E
3.9.1-0128-0003/142
0899E
3.9.1-0128-0003/143
0899E
3.9.1-0128-0003/144
0899E
3.9.1-0128-0003/145
0899E
3.9.1-0128-0003/146
0899E
3.9.1-0128-0003/147
0899E
3.9.1-0128-0003/148
0899E
3.9.1-0128-0003/149
0899E
3.9.1-0128-0003/150
0899E
3.9.1-0128-0003/151
0899E
3.9.1-0128-0003/152
0899E
3.9.1-0128-0003/153
0899E
3.9.1-0128-0003/154
0899E
3.9.1-0128-0003/155
0899E
3.9.1-0128-0003/156
0899E
3.9.1-0128-0003/157
0899E
3.9.1-0128-0003/158
0899E
3.9.1-0603-0001/1
0200E
3.9.1-0603-0001/2
0200E
3.9.1-0603-0001/3
0200E
3.9.1-0603-0001/4
0200E
3.9.1-0603-0001/5
0200E
3.9.1-0603-0001/6
0200E
3.9.1-1088-0001/1
0799E
3.9.1-1088-0001/2
0799E
3.9.1-1088-0001/3
0799E
3.9.1-1088-0001/4
0799E
3.9.1-1088-0001/5
0799E
3.9.1-1088-0001/6
0799E
3.9.1-1088-0001/7
0799E
3.9.1-1088-0001/8
0799E
3.9.1-1088-0001/9
0799E
3.9.1-1088-0001/10
0799E
3.9.1-1088-0001/11
0799E
3.9.1-1088-0001/12
0799E
3.9.1-1088-0001/13
0799E
3.9.1-1088-0001/14
0799E
3.9.1-1088-0001/15
0799E
3.9.1-1088-0001/16
0799E
3.9.1-1088-0001/17
0799E
3.9.1-1088-0001/18
0799E
3.9.1-1088-0001/19
0799E
3.9.1-1088-0001/20
0799E
3.9.1-1088-0001/21
0799E
3.9.1-1088-0001/22
0799E
3.9.1-1088-0001/23
0799E
3.9.1-1088-0001/24
0799E
3.9.1-1088-0001/25
0799E
3.9.1-1088-0001/26
0799E
3.9.1-1088-0001/27
0799E
3.9.1-1088-0001/28
0799E
3.9.1-1088-0001/29
0799E
3.9.1-1088-0001/30
0799E
3.9.1-1088-0001/31
0799E
3.9.1-1088-0001/32
0799E
3.9.1-1088-0001/33
0799E
3.9.1-1088-0001/34
0799E
3.9.1-1088-0001/35
0799E
3.9.1-1088-0001/36
0799E
3.9.1-1088-0001/37
0799E
3.9.1-1088-0001/38
0799E
3.9.1-1088-0001/39
0799E
3.9.1-1088-0001/40
0799E
3.9.1-1088-0001/41
0799E
3.9.1-1088-0001/42
0799E
3.9.1-1088-0001/43
0799E
3.9.1-1088-0001/44
0799E
3.9.1-1088-0001/45
0799E
3.9.1-1088-0001/46
0799E
3.9.1-1088-0001/47
0799E
3.9.1-1088-0001/48
0799E
3.9.1-1088-0001/49
0799E
3.9.1-1088-0001/50
0799E
3.9.1-1088-0001/51
0799E
3.9.1-1088-0001/52
0799E
3.9.1-1088-0001/53
0799E
3.9.1-1088-0001/54
0799E
3.9.1-1088-0001/55
0799E
3.9.1-1088-0001/56
0799E
3.9.1-1088-0001/57
0799E
3.9.1-1088-0001/58
0799E
3.9.1-1088-0001/59
0799E
3.9.1-1088-0001/60
0799E
3.9.1-1088-0001/61
0799E
3.9.1-1088-0001/62
0799E
3.9.1-1088-0001/63
0799E
3.9.1-1088-0001/64
0799E
3.9.1-1088-0001/65
0799E
3.9.1-1088-0001/66
0799E
3.9.1-1088-0001/67
0799E
3.9.1-1088-0001/68
0799E
3.9.1-1088-0001/69
0799E
3.9.1-1088-0001/70
0799E
3.9.1-1088-0001/71
0799E
3.9.1-1088-0001/72
0799E
3.9.1-1088-0001/73
0799E
3.9.1-1088-0001/74
0799E
3.9.1-1088-0001/75
0799E
3.9.1-1088-0001/76
0799E
3.9.1-1088-0001/77
0799E
3.9.1-1088-0001/78
0799E
3.9.1-1088-0001/79
0799E
3.9.1-1088-0001/80
0799E
3.9.1-1088-0001/81
0799E
3.9.1-1088-0001/82
0799E
3.9.1-1088-0001/83
0799E
3.9.1-1088-0001/84
0799E
3.9.1-1088-0001/85
0799E
3.9.1-1088-0001/86
0799E
3.9.1-1088-0001/87
0799E
3.9.1-1088-0001/88
0799E
3.9.1-1088-0001/89
0799E
3.9.1-1088-0001/90
0799E
3.9.1-1088-0001/91
0799E
3.9.1-1088-0001/92
0799E
3.9.1-1088-0001/93
0799E
3.9.1-1088-0001/94
0799E
3.9.1-1088-0001/95
0799E
3.9.1-1088-0001/96
0799E
3.9.1-1088-0001/97
0799E
3.9.1-1088-0001/98
0799E
3.9.1-1088-0001/99
0799E
3.9.1-1088-0001/100
0799E
3.9.1-1088-0001/101
0799E
3.9.1-1088-0001/102
0799E
3.9.1-1088-0001/103
0799E
3.9.1-1088-0001/104
0799E
3.9.1-1088-0001/105
0799E
3.9.1-1088-0001/106
0799E
3.9.1-1088-0001/107
0799E
3.9.1-1088-0001/108
0799E
3.9.1-1088-0001/109
0799E
3.9.1-1088-0001/110
0799E
3.9.1-1088-0001/111
0799E
3.9.1-1088-0001/112
0799E
3.9.1-1088-0001/113
0799E
3.9.1-1088-0001/114
0799E
3.9.1-1088-0001/115
0799E
3.9.1-1088-0001/116
0799E
3.9.1-1088-0001/117
0799E
3.9.1-1088-0001/118
0799E
3.9.1-1088-0001/119
0799E
3.9.1-1088-0001/120
0799E
3.9.1-1088-0001/121
0799E
3.9.1-1088-0001/122
0799E
3.9.1-1088-0001/123
0799E
3.9.1-1088-0001/124
0799E
3.9.1-1088-0001/125
0799E
3.9.1-1088-0001/126
0799E
3.9.1-1088-0001/127
0799E
3.9.1-1088-0001/128
0799E
3.9.1-1088-0001/129
0799E
3.9.1-1088-0001/130
0799E
3.9.1-1088-0001/131
0799E
3.9.1-1088-0001/132
0799E
3.9.1-1088-0001/133
0799E
3.9.1-1088-0001/134
0799E
3.9.1-1088-0001/135
0799E
3.9.1-1088-0001/136
0799E
3.9.1-1088-0001/137
0799E
3.9.1-1088-0001/138
0799E
3.9.1-1088-0001/139
0799E
3.9.1-1088-0001/140
0799E
3.9.1-1088-0001/141
0799E
3.9.1-1088-0001/142
0799E
3.9.1-1088-0001/143
0799E
3.9.1-1088-0001/144
0799E
3.9.1-1088-0001/145
0799E
3.9.1-1088-0001/146
0799E
3.9.1-1088-0001/147
0799E
3.9.1-1088-0001/148
0799E
3.9.1-1088-0001/149
0799E
3.9.1-1088-0001/150
0799E
3.9.1-1088-0001/151
0799E
3.9.1-1088-0001/152
0799E
3.9.1-1088-0001/153
0799E
3.9.1-1088-0001/154
0799E
3.9.1-1088-0001/155
0799E
3.9.1-1088-0001/156
0799E
3.9.1-1088-0001/157
0799E
3.9.1-1088-0001/158
0799E
3.9.1-1088-0001/159
0799E
3.9.1-1088-0001/160
0799E
3.9.1-1256-0001/1
0106E
3.9.1-1256-0001/2
0106E
3.9.1-1256-0001/3
0106E
3.9.1-1256-0001/4
0106E
3.9.1-1256-0001/5
0106E
3.9.1-1256-0001/6
0106E
3.9.1-1256-0001/7
0106E
3.9.1-1256-0001/8
0106E
3.9.1-1256-0001/9
0106E
3.9.1-1256-0001/10
0106E
3.9.1-1256-0001/11
0106E
3.9.1-1256-0001/12
0106E
3.9.1-1256-0001/13
0106E
3.9.1-0081-0006/1
0101E
3.9.1-0081-0006/2
0101E
3.9.1-0081-0006/3
0101E
3.9.1-0081-0006/4
0101E
3.9.1-0081-0006/5
0101E
3.9.1-0081-0006/6
0101E
3.9.1-0081-0006/7
0101E
3.9.1-0081-0006/8
0101E
3.9.1-0081-0006/9
0101E
3.9.1-0081-0006/10
0101E
3.9.1-0081-0006/11
0101E
3.9.1-0081-0006/12
0101E
3.9.1-0081-0006/13
0101E
3.9.1-0081-0006/14
0101E
3.9.1-0081-0006/15
0101E
3.9.1-0081-0006/16
0101E
3.9.1-0081-0006/17
0101E
3.9.1-0081-0006/18
0101E
3.9.1-0081-0006/19
0101E
3.9.1-0081-0006/20
0101E
3.9.1-0081-0006/21
0101E
3.9.1-0081-0006/22
0101E
3.9.1-0081-0006/23
0101E
3.9.1-0081-0006/24
0101E
3.9.1-0177-0003/1
0102E
3.9.1-0177-0003/2
0102E
3.9.1-0177-0003/3
0102E
3.9.1-0177-0003/4
0102E
3.9.1-0177-0003/5
0102E
3.9.1-0177-0003/6
0102E
3.9.1-0177-0003/7
0102E
3.9.1-0177-0003/8
0102E
3.9.1-0177-0003/9
0102E
3.9.1-0177-0003/10
0102E
3.9.1-0177-0003/11
0102E
3.9.1-0177-0003/12
0102E
3.9.1-0177-0003/13
0102E
3.9.1-0177-0003/14
0102E
3.9.1-0177-0003/15
0102E
3.9.1-0177-0003/16
0102E
3.9.1-0967-0003/1
0502E
3.9.1-0967-0003/2
0502E
3.9.1-0967-0003/3
0502E
3.9.1-0967-0003/4
0502E
3.9.1-0967-0003/5
0502E
3.9.1-0967-0003/6
0502E
3.9.1-0967-0003/7
0502E
3.9.1-0967-0003/8
0502E
3.9.1-0967-0003/9
0502E
3.9.1-0967-0003/10
0502E
3.9.1-0967-0003/11
0502E
3.9.1-0967-0003/12
0502E
3.9.1-0967-0003/13
0502E
3.9.1-0967-0003/14
0502E
3.9.1-0967-0003/15
0502E
3.9.1-0967-0003/16
0502E
3.9.1-0967-0003/17
0502E
3.9.1-0967-0003/18
0502E
3.9.1-0967-0003/19
0502E
3.9.1-0967-0003/20
0502E
3.9.1-0967-0003/21
0502E
3.9.1-0967-0003/22
0502E
3.9.1-0967-0003/23
0502E
3.9.1-0967-0003/24
0502E
3.9.1-0967-0003/25
0502E
3.9.1-0967-0003/26
0502E
3.9.1-0967-0003/27
0502E
3.9.1-0967-0003/28
0502E
TAB-Sheet:
- MB
Hyundai Engineering & General User Information 1
Construction Co.,LTD.
TAB-Sheet:
- CUH
Cabinets for Power Adjuster 2
Jebel Ali Power &
Desalination StationL- TAB-Sheet:
Phase 2 - MBA
Compressor and Turbine 3
TAB-Sheet:
TAB-Sheet:
Operating and Maintenance
Documentation - MBH
Cooling and Sealing Gas System 5
- Tab 1 - 9
- MBN
Fuel Supply System, liquid 7
TAB-Sheet:
- MBV
Lubricant Supply System 8
TAB-Sheet:
- MBX
Pneumatic Control Equipment 9
1
- Tab 6
3.9.1-0603-0001/1
0200E
3.9.1-0603-0001/2
0200E
3.9.1-0603-0001/3
0200E
3.9.1-0603-0001/4
0200E
3.9.1-0603-0001/5
0200E
3.9.1-0603-0001/6
0200E
3.9.1-1088-0001/1
0799E
3.9.1-1088-0001/2
0799E
3.9.1-1088-0001/3
0799E
3.9.1-1088-0001/4
0799E
3.9.1-1088-0001/5
0799E
3.9.1-1088-0001/6
0799E
3.9.1-1088-0001/7
0799E
3.9.1-1088-0001/8
0799E
3.9.1-1088-0001/9
0799E
3.9.1-1088-0001/10
0799E
3.9.1-1088-0001/11
0799E
3.9.1-1088-0001/12
0799E
3.9.1-1088-0001/13
0799E
3.9.1-1088-0001/14
0799E
3.9.1-1088-0001/15
0799E
3.9.1-1088-0001/16
0799E
3.9.1-1088-0001/17
0799E
3.9.1-1088-0001/18
0799E
3.9.1-1088-0001/19
0799E
3.9.1-1088-0001/20
0799E
3.9.1-1088-0001/21
0799E
3.9.1-1088-0001/22
0799E
3.9.1-1088-0001/23
0799E
3.9.1-1088-0001/24
0799E
3.9.1-1088-0001/25
0799E
3.9.1-1088-0001/26
0799E
3.9.1-1088-0001/27
0799E
3.9.1-1088-0001/28
0799E
3.9.1-1088-0001/29
0799E
3.9.1-1088-0001/30
0799E
3.9.1-1088-0001/31
0799E
3.9.1-1088-0001/32
0799E
3.9.1-1088-0001/33
0799E
3.9.1-1088-0001/34
0799E
3.9.1-1088-0001/35
0799E
3.9.1-1088-0001/36
0799E
3.9.1-1088-0001/37
0799E
3.9.1-1088-0001/38
0799E
3.9.1-1088-0001/39
0799E
3.9.1-1088-0001/40
0799E
3.9.1-1088-0001/41
0799E
3.9.1-1088-0001/42
0799E
3.9.1-1088-0001/43
0799E
3.9.1-1088-0001/44
0799E
3.9.1-1088-0001/45
0799E
3.9.1-1088-0001/46
0799E
3.9.1-1088-0001/47
0799E
3.9.1-1088-0001/48
0799E
3.9.1-1088-0001/49
0799E
3.9.1-1088-0001/50
0799E
3.9.1-1088-0001/51
0799E
3.9.1-1088-0001/52
0799E
3.9.1-1088-0001/53
0799E
3.9.1-1088-0001/54
0799E
3.9.1-1088-0001/55
0799E
3.9.1-1088-0001/56
0799E
3.9.1-1088-0001/57
0799E
3.9.1-1088-0001/58
0799E
3.9.1-1088-0001/59
0799E
3.9.1-1088-0001/60
0799E
3.9.1-1088-0001/61
0799E
3.9.1-1088-0001/62
0799E
3.9.1-1088-0001/63
0799E
3.9.1-1088-0001/64
0799E
3.9.1-1088-0001/65
0799E
3.9.1-1088-0001/66
0799E
3.9.1-1088-0001/67
0799E
3.9.1-1088-0001/68
0799E
3.9.1-1088-0001/69
0799E
3.9.1-1088-0001/70
0799E
3.9.1-1088-0001/71
0799E
3.9.1-1088-0001/72
0799E
3.9.1-1088-0001/73
0799E
3.9.1-1088-0001/74
0799E
3.9.1-1088-0001/75
0799E
3.9.1-1088-0001/76
0799E
3.9.1-1088-0001/77
0799E
3.9.1-1088-0001/78
0799E
3.9.1-1088-0001/79
0799E
3.9.1-1088-0001/80
0799E
3.9.1-1088-0001/81
0799E
3.9.1-1088-0001/82
0799E
3.9.1-1088-0001/83
0799E
3.9.1-1088-0001/84
0799E
3.9.1-1088-0001/85
0799E
3.9.1-1088-0001/86
0799E
3.9.1-1088-0001/87
0799E
3.9.1-1088-0001/88
0799E
3.9.1-1088-0001/89
0799E
3.9.1-1088-0001/90
0799E
3.9.1-1088-0001/91
0799E
3.9.1-1088-0001/92
0799E
3.9.1-1088-0001/93
0799E
3.9.1-1088-0001/94
0799E
3.9.1-1088-0001/95
0799E
3.9.1-1088-0001/96
0799E
3.9.1-1088-0001/97
0799E
3.9.1-1088-0001/98
0799E
3.9.1-1088-0001/99
0799E
3.9.1-1088-0001/100
0799E
3.9.1-1088-0001/101
0799E
3.9.1-1088-0001/102
0799E
3.9.1-1088-0001/103
0799E
3.9.1-1088-0001/104
0799E
3.9.1-1088-0001/105
0799E
3.9.1-1088-0001/106
0799E
3.9.1-1088-0001/107
0799E
3.9.1-1088-0001/108
0799E
3.9.1-1088-0001/109
0799E
3.9.1-1088-0001/110
0799E
3.9.1-1088-0001/111
0799E
3.9.1-1088-0001/112
0799E
3.9.1-1088-0001/113
0799E
3.9.1-1088-0001/114
0799E
3.9.1-1088-0001/115
0799E
3.9.1-1088-0001/116
0799E
3.9.1-1088-0001/117
0799E
3.9.1-1088-0001/118
0799E
3.9.1-1088-0001/119
0799E
3.9.1-1088-0001/120
0799E
3.9.1-1088-0001/121
0799E
3.9.1-1088-0001/122
0799E
3.9.1-1088-0001/123
0799E
3.9.1-1088-0001/124
0799E
3.9.1-1088-0001/125
0799E
3.9.1-1088-0001/126
0799E
3.9.1-1088-0001/127
0799E
3.9.1-1088-0001/128
0799E
3.9.1-1088-0001/129
0799E
3.9.1-1088-0001/130
0799E
3.9.1-1088-0001/131
0799E
3.9.1-1088-0001/132
0799E
3.9.1-1088-0001/133
0799E
3.9.1-1088-0001/134
0799E
3.9.1-1088-0001/135
0799E
3.9.1-1088-0001/136
0799E
3.9.1-1088-0001/137
0799E
3.9.1-1088-0001/138
0799E
3.9.1-1088-0001/139
0799E
3.9.1-1088-0001/140
0799E
3.9.1-1088-0001/141
0799E
3.9.1-1088-0001/142
0799E
3.9.1-1088-0001/143
0799E
3.9.1-1088-0001/144
0799E
3.9.1-1088-0001/145
0799E
3.9.1-1088-0001/146
0799E
3.9.1-1088-0001/147
0799E
3.9.1-1088-0001/148
0799E
3.9.1-1088-0001/149
0799E
3.9.1-1088-0001/150
0799E
3.9.1-1088-0001/151
0799E
3.9.1-1088-0001/152
0799E
3.9.1-1088-0001/153
0799E
3.9.1-1088-0001/154
0799E
3.9.1-1088-0001/155
0799E
3.9.1-1088-0001/156
0799E
3.9.1-1088-0001/157
0799E
3.9.1-1088-0001/158
0799E
3.9.1-1088-0001/159
0799E
3.9.1-1088-0001/160
0799E
3.9.1-1253-0001/1
0497DE
3.9.1-0639-0001/1
0899DE
3.9.1-0639-0001/2
0899DE
3.9.1-0639-0001/3
0899DE
3.9.1-0639-0001/4
0899DE
3.9.1-0718-0003/1
1202E
3.9.1-0718-0003/2
1202E
3.9.1-0718-0003/3
1202E
3.9.1-0718-0003/4
1202E
3.9.1-0718-0003/5
1202E
3.9.1-0718-0003/6
1202E
3.9.1-0718-0003/7
1202E
3.9.1-0718-0003/8
1202E
3.9.1-0718-0003/9
1202E
3.9.1-0718-0003/10
1202E
3.9.1-0718-0003/11
1202E
3.9.1-0718-0003/12
1202E
3.9.1-0718-0003/13
1202E
3.9.1-0718-0003/14
1202E
3.9.1-0718-0003/15
1202E
3.9.1-0718-0003/16
1202E
3.9.1-0718-0003/17
1202E
3.9.1-0718-0003/18
1202E
3.9.1-0718-0003/19
1202E
3.9.1-0718-0003/20
1202E
3.9.1-0718-0003/21
1202E
3.9.1-0718-0003/22
1202E
3.9.1-0718-0003/23
1202E
3.9.1-0718-0003/24
1202E
3.9.1-0718-0003/25
1202E
3.9.1-0718-0003/26
1202E
3.9.1-0718-0003/27
1202E
3.9.1-0718-0003/28
1202E
3.9.1-0718-0003/29
1202E
3.9.1-0718-0003/30
1202E
3.9.1-0718-0003/31
1202E
3.9.1-0718-0003/32
1202E
3.9.1-0718-0003/33
1202E
3.9.1-0718-0003/34
1202E
3.9.1-0718-0003/35
1202E
3.9.1-0718-0003/36
1202E
3.9.1-0718-0003/37
1202E
3.9.1-0718-0003/38
1202E
3.9.1-0718-0003/39
1202E
3.9.1-0718-0003/40
1202E
3.9.1-0718-0003/41
1202E
3.9.1-0718-0003/42
1202E
3.9.1-0718-0003/43
1202E
3.9.1-0718-0003/44
1202E
3.9.1-0718-0003/45
1202E
3.9.1-0718-0003/46
1202E
3.9.1-0718-0003/47
1202E
3.9.1-0718-0003/48
1202E
3.9.1-0718-0003/49
1202E
3.9.1-0718-0003/50
1202E
3.9.1-0718-0003/51
1202E
3.9.1-0718-0003/52
1202E
3.9.1-0718-0003/53
1202E
3.9.1-0718-0003/54
1202E
3.9.1-0718-0003/55
1202E
3.9.1-0718-0003/56
1202E
3.9.1-0718-0003/57
1202E
3.9.1-0718-0003/58
1202E
3.9.1-0718-0003/59
1202E
3.9.1-0718-0003/60
1202E
3.9.1-0718-0003/61
1202E
3.9.1-0718-0003/62
1202E
3.9.1-0718-0003/63
1202E
3.9.1-0718-0003/64
1202E
3.9.1-0718-0003/65
1202E
3.9.1-0718-0003/66
1202E
3.9.1-0718-0003/67
1202E
3.9.1-0718-0003/68
1202E
3.9.1-0718-0003/69
1202E
3.9.1-0718-0003/70
1202E
3.9.1-0718-0003/71
1202E
3.9.1-0718-0003/72
1202E
3.9.1-0718-0003/73
1202E
3.9.1-0718-0003/74
1202E
3.9.1-0718-0003/75
1202E
3.9.1-0718-0003/76
1202E
3.9.1-0718-0003/77
1202E
3.9.1-0718-0003/78
1202E
3.9.1-0718-0003/79
1202E
3.9.1-0718-0003/80
1202E
3.9.1-0718-0003/81
1202E
3.9.1-0718-0003/82
1202E
3.9.1-0718-0003/83
1202E
3.9.1-0718-0003/84
1202E
3.9.1-0718-0003/85
1202E
3.9.1-0718-0003/86
1202E
3.9.1-0718-0003/87
1202E
3.9.1-0718-0003/88
1202E
3.9.1-0718-0003/89
1202E
3.9.1-0718-0003/90
1202E
3.9.1-0718-0003/91
1202E
3.9.1-0718-0003/92
1202E
3.9.1-0718-0003/93
1202E
3.9.1-0718-0003/94
1202E
3.9.1-0718-0003/95
1202E
3.9.1-0718-0003/96
1202E
3.9.1-0718-0003/97
1202E
3.9.1-0718-0003/98
1202E
3.9.1-0718-0003/99
1202E
3.9.1-0718-0003/100
1202E
3.9.1-0718-0003/101
1202E
3.9.1-0718-0003/102
1202E
3.9.1-0718-0003/103
1202E
3.9.1-0718-0003/104
1202E
3.9.1-0718-0003/105
1202E
3.9.1-0718-0003/106
1202E
3.9.1-0718-0003/107
1202E
3.9.1-0718-0003/108
1202E
3.9.1-0718-0003/109
1202E
3.9.1-0718-0003/110
1202E
3.9.1-0718-0003/111
1202E
3.9.1-0718-0003/112
1202E
3.9.1-0718-0003/113
1202E
3.9.1-0718-0003/114
1202E
3.9.1-0718-0003/115
1202E
3.9.1-0718-0003/116
1202E
3.9.1-0718-0003/117
1202E
3.9.1-0718-0003/118
1202E
3.9.1-0718-0003/119
1202E
3.9.1-0718-0003/120
1202E
3.9.1-0718-0003/121
1202E
3.9.1-0718-0003/122
1202E
3.9.1-0718-0003/123
1202E
3.9.1-0718-0003/124
1202E
3.9.1-0718-0003/125
1202E
3.9.1-0718-0003/126
1202E
3.9.1-0718-0003/127
1202E
3.9.1-0718-0003/128
1202E
3.9.1-0718-0003/129
1202E
3.9.1-0718-0003/130
1202E
3.9.1-0718-0003/131
1202E
3.9.1-0718-0003/132
1202E
3.9.1-0718-0003/133
1202E
3.9.1-0718-0003/134
1202E
3.9.1-0718-0003/135
1202E
3.9.1-0718-0003/136
1202E
3.9.1-0718-0003/137
1202E
3.9.1-0718-0003/138
1202E
3.9.1-0718-0003/139
1202E
3.9.1-0718-0003/140
1202E
3.9.1-0718-0003/141
1202E
3.9.1-0718-0003/142
1202E
3.9.1-0718-0003/143
1202E
3.9.1-0718-0003/144
1202E
3.9.1-0718-0003/145
1202E
3.9.1-0718-0003/146
1202E
3.9.1-0718-0003/147
1202E
3.9.1-0718-0003/148
1202E
3.9.1-0718-0003/149
1202E
3.9.1-0718-0003/150
1202E
3.9.1-0718-0003/151
1202E
3.9.1-0718-0003/152
1202E
3.9.1-0718-0003/153
1202E
3.9.1-0718-0003/154
1202E
3.9.1-0718-0003/155
1202E
3.9.1-0718-0003/156
1202E
3.9.1-0718-0003/157
1202E
3.9.1-0718-0003/158
1202E
3.9.1-0718-0003/159
1202E
3.9.1-0718-0003/160
1202E
3.9.1-0718-0003/161
1202E
3.9.1-0718-0003/162
1202E
3.9.1-0718-0003/163
1202E
3.9.1-0718-0003/164
1202E
3.9.1-0718-0003/165
1202E
3.9.1-0718-0003/166
1202E
3.9.1-0718-0003/167
1202E
3.9.1-0718-0003/168
1202E
3.9.1-0718-0003/169
1202E
3.9.1-0718-0003/170
1202E
3.9.1-0718-0003/171
1202E
3.9.1-0718-0003/172
1202E
3.9.1-0718-0003/173
1202E
3.9.1-0718-0003/174
1202E
3.9.1-0718-0003/175
1202E
3.9.1-0718-0003/176
1202E
3.9.1-0718-0003/177
1202E
3.9.1-0718-0003/178
1202E
3.9.1-0718-0003/179
1202E
3.9.1-0718-0003/180
1202E
3.9.1-0718-0003/181
1202E
3.9.1-0718-0003/182
1202E
3.9.1-0718-0003/183
1202E
3.9.1-0718-0003/184
1202E
3.9.1-0718-0003/185
1202E
3.9.1-0100-0002/1
1202E
3.9.1-0100-0002/2
1202E
3.9.1-0100-0002/3
1202E
3.9.1-0100-0002/4
1202E
3.9.1-0100-0002/5
1202E
3.9.1-0100-0002/6
1202E
3.9.1-0100-0002/7
1202E
3.9.1-0100-0002/8
1202E
3.9.1-0106-0005/1
1005E
3.9.1-0106-0005/2
1005E
3.9.1-0106-0005/3
1005E
3.9.1-0106-0005/4
1005E
3.9.1-0106-0005/5
1005E
3.9.1-0106-0005/6
1005E
3.9.1-0106-0005/7
1005E
3.9.1-0106-0005/8
1005E
3.9.1-0106-0005/9
1005E
3.9.1-0106-0005/10
1005E
3.9.1-0106-0005/11
1005E
3.9.1-0106-0005/12
1005E
3.9.1-0280-0003/1
0203E
3.9.1-0280-0003/2
0203E
3.9.1-0280-0003/3
0203E
3.9.1-0280-0003/4
0203E
3.9.1-0280-0003/5
0203E
3.9.1-0280-0003/6
0203E
3.9.1-0280-0003/7
0203E
3.9.1-0280-0003/8
0203E
3.9.1-0280-0003/9
0203E
3.9.1-0280-0003/10
0203E
3.9.1-0280-0003/11
0203E
3.9.1-0280-0003/12
0203E
3.9.1-0280-0003/13
0203E
3.9.1-0280-0003/14
0203E
3.9.1-0280-0003/15
0203E
3.9.1-0280-0003/16
0203E
3.9.1-0280-0003/17
0203E
3.9.1-0280-0003/18
0203E
3.9.1-0280-0003/19
0203E
3.9.1-0280-0003/20
0203E
3.9.1-0280-0003/21
0203E
3.9.1-0280-0003/22
0203E
3.9.1-0280-0003/23
0203E
3.9.1-0280-0003/24
0203E
3.9.1-0280-0003/25
0203E
3.9.1-0280-0003/26
0203E
3.9.1-0281-0003/1
0704E
3.9.1-0281-0003/2
0704E
3.9.1-0281-0003/3
0704E
3.9.1-0281-0003/4
0704E
3.9.1-0281-0003/5
0704E
3.9.1-0281-0003/6
0704E
3.9.1-0281-0003/7
0704E
3.9.1-0281-0003/8
0704E
3.9.1-0281-0003/9
0704E
3.9.1-0281-0003/10
0704E
3.9.1-0281-0003/11
0704E
3.9.1-0281-0003/12
0704E
3.9.1-0547-0002/1
1203E
3.9.1-0547-0002/2
1203E
3.9.1-0547-0002/3
1203E
3.9.1-0547-0002/4
1203E
3.9.1-0547-0002/5
1203E
3.9.1-0547-0002/6
1203E
3.9.1-0547-0002/7
1203E
3.9.1-0547-0002/8
1203E
3.9.1-0547-0002/9
1203E
3.9.1-0547-0002/10
1203E
3.9.1-0547-0002/11
1203E
3.9.1-0547-0002/12
1203E
3.9.1-1101-0001/1
1104E
3.9.1-1101-0001/2
1104E
3.9.1-1101-0001/3
1104E
3.9.1-1101-0001/4
1104E
3.9.1-1101-0001/5
1104E
3.9.1-1101-0001/6
1104E
3.9.1-1101-0001/7
1104E
3.9.1-1101-0001/8
1104E