Fall of 6 feet or more (hoist Personal fall hardness (PFA)
area) Connecters, lanyard and Interior and exterior fall lifelines, harness and anchors. hazard. Install a safety net as close as practicable under the walking or working surfaces. Use guardrail system to protect workers from falls. Falling through holes Hole covers can be used to prevent workers from falling through holes Damage ladder Checked daily and always kept in good condition Weather Monitor weather condition closely Slippery Roof Wear appropriate footwear when accessing roofs UV exposure, heat Wear appropriate PPE Wear sun protection cream Keep hydrated with fresh water Falling object Install a safety net as close as practicable under the walking or working surface Toe boards must be erected along the edge of the overhead walking or working surface to protect person below. Tools and equipment are attached to a safety lanyard Poor housekeeping Keep areas tidy and unobstructed at all times Remove excess mortar, broken or scattered masonry units, and all other materials and debris must be kept clear of the working area. Lack of training Fall-protection Training Employers must provide a training program that teaches workers who might be exposed to fall hazards to recognize such hazards and minimize them.