Professional Documents
Culture Documents
Aide-mmoire
Referencia rpida
CECHH01 3-285-687-13(1)
About the PS3 system documentation Friends
The PS3 system documentation includes the following: Chatting and exchanging messages
Video
Playing video
Check that you have all of the following items. If any items are missing, contact Music
SCEA Consumer Services at 1-800-345-7669.
Playing music
Photo
s AC power cord
Displaying images
s PLAYSTATION3 system
Settings
s AV cable
Adjusting PS3 system settings
PS button: Selecting an icon and pressing the Pressing the button during content
Displays the home menu button will display the options menu. playback will display the control panel.
Turns the system on/off
button:
Confirms the selected item
3
Getting started
01 Part names
System front System rear
PS family logo
Can be rotated to match the AV MULTI OUT connector
position of the system
DIGITAL OUT (OPTICAL) connector
Disc slot
Power button
Eject button MAIN POWER switch
AC IN connector
WLAN access indicator Vent
HDD access indicator LAN connector
USB connectors
HDMI OUT connector
Hint
The system can be set in a horizontal or vertical position.
Set as shown in the diagram at right when setting in the
Caution vertical position.
Do not use the system in a closed cabinet or other locations where heat
may build up. Doing so may cause the system to overheat and may lead to
fire, injury or malfunction. Notice
If the system's internal temperature becomes elevated, the power indicator Do not place the system in an area subject to excessive
will flash alternately in red and green. In this case, turn off the system dust or cigarette smoke. Dust build-up or cigarette
( page 16) and leave it unused for a while. After the system cools down, smoke residue on the internal components (such as the
move it to a location with good ventilation, and then resume use. lens) may cause the system to malfunction.
4
Getting started
Part names
Hints
For details on the wireless controller, see "Using the wireless controller"
( page 17).
The SIXAXIS wireless controller that is supplied with this system is not
equipped with a vibration function.
Notice
Some PlayStation and PlayStation2 peripherals such as the analog
controller (DUALSHOCK) and analog controller (DUALSHOCK2) are not
compatible with the PS3 system. For details, visit
http://www.us.playstation.com.
5
Getting started
02 Setting up the PS3 system
Procedure flow for setting up the Step 1: Connect to a TV
system
Video output on the PS3 system
Step 1: Connect to a TV.
Page 6 The PS3 system can output two types of resolution: HD and SD. Refer to the instruction manual
for the TV in use to check which video mode is supported.
m HD (High Definition) SD (Standard Definition)
Step 2: Connect digital audio Video mode *1 1080p 1080i 720p 480p 480i *2
devices. Page 9
16:9 16:9
Aspect ratio 16:9 16:9 16:9 4:3 4:3
m
*1 This number indicates the number of scan lines. Note that "i" stands for "interlace" and "p" stands for
"progressive". Using progressive results in high-quality video with minimal flickering.
Step 3: Connect an Ethernet
cable. Page 10 *2 The video output setting on the system will display as "Standard (NTSC)".
m
Step 5: Perform initial setup of
the system software.
Page 11 HD screen SD screen
6
Getting started
Setting up the PS3 system
ES
HDMI cable HDMI IN connector 1080p / 1080i / 720p / 480p
(sold separately)
S VIDEO L-AUDIO-R
S VIDEO cable S VIDEO IN connector 480i*2
(sold separately)
*1 Depending on the type of TV or content to be played, some video modes may not be supported.
If a device that is not compatible with the HDCP (High-bandwidth Digital Content Protection) standard is connected to the system using an HDMI cable, video
and/or audio cannot be output from the system.
Copyright-protected Blu-ray video discs can only be output at 1080p using an HDMI cable connected to a device that is compatible with the HDCP (High-
bandwidth Digital Content Protection) standard.
*2 The video output setting on the system will display as "Standard (NTSC)".
7
Getting started
Setting up the PS3 system
HDMI cable
TV (sold separately)
Hint
HDMI IN connector HDMI OUT connector If you change the type of cable used to connect the system, video may not be
displayed. If this happens, turn off the system and then turn it on again by
touching the power button on the system front for at least five seconds (until the
system beeps twice). The video output setting will then be reset to the standard
resolution.
8
Getting started
Setting up the PS3 system
9
Getting started
Setting up the PS3 system
Caution
The system supports 10BASE-T, 100BASE-TX and 1000BASE-T networks.
Do not connect a standard telephone line or other types of cords or cables
that are not compatible with the system directly to the LAN connector on the
system, as this may cause heat build-up, fire or malfunction.
TV
Hint
Hints You can connect to the Internet without using an Ethernet cable. For details,
If your TV is not equipped with an HDMI input connector, use a video output see "Using a wireless connection" ( page 25).
cable of the correct type for your TV ( page 7) to connect it to the PS3
system directly.
If a device is connected to the PS3 system via an HDMI cable, do not turn
off the device while the system is turned on (power indicator is lit solid
green). Doing so may cause sound distortions or produce abnormal sounds.
10
Getting started
Setting up the PS3 system
Step 4: Connect the AC power cord Step 5: Perform initial setup of the system software
Connect the AC power cord. After turning on the system, perform initial setup. US
Caution
1 Turn on the TV.
FR
Do not plug the AC power cord for the system into an electrical outlet until
you have made all other connections. 2 Turn on the main power switch. ES
To avoid possible damage to the system or a connected TV or component,
the AC power cord must be plugged into a polarized, three-prong,
electrical outlet that is properly wired and grounded. As with all electrical
Main power switch
products, connection to faulty or defective components, or the failure to
connect to a properly wired outlet, could cause sparking and pose a fire
hazard.
The socket-outlet shall be installed near the equipment and shall be easily
accessible.
The power indicator turns solid red to indicate that the system has entered
standby mode.
AC IN connector
Power button
To the electrical outlet
Power indicator
The power indicator turns green and the picture is displayed on the TV
screen.
11
Getting started
Setting up the PS3 system
4 Connect the wireless controller to the system using a USB 6 Perform initial setup.
cable.
USB connector
Hints
When using an HDMI cable to connect the system to the TV, a screen for
changing the video output resolution will be displayed during initial setup. If
you select "Yes" on the screen and then press the button, the optimal
output resolution will be selected automatically.
For details on entering text, see "Using the on-screen keyboard"
( page 32).
Settings entered during initial setup can be changed under (Settings) or
(Users). For details, refer to the user's guide ( page 29).
12
Getting started
Setting up the PS3 system
If you select "AV MULTI / SCART", you must choose the type of output
Adjusting video output settings signal on the next screen. In most cases, select "Y Pb/Cb Pr/Cr".
US
Depending on the type of cables and the connectors used, you may
need to adjust the PS3 system's video output settings to display
3 Confirm the screen, and then press the button.
If you changed the connector in step 2, a screen for confirming the change
video at HD resolutions ( page 6) on a TV. FR
will be displayed.
Hint
If video is not displayed on the TV, perform the following operations:
4 Confirm the settings, select "Yes", and then press the ES
button.
Switch the video input of the TV to match the input connector used to
If you changed the connector in step 2, a screen for confirming the
connect to the system.
settings will be displayed.
Turn off the system, and then turn it on again by touching the power button
on the system front for at least five seconds (until the system beeps twice).
The video output setting will then be reset to the standard resolution.
If you select "HDMI", you will have the option to choose "Automatic" or
"Custom" on the next screen. In most cases, select "Automatic", and video
output settings will be completed automatically.
13
Getting started
Setting up the PS3 system
5 Select the resolutions supported by the TV, and then press 6 Confirm the settings, select "Yes", and then press the
the button. button.
The resolution displayed on the TV varies depending on the input Depending on the connector selected in step 2 and the resolutions
connector and the type of cable used ( page 7). The highest resolution selected in step 5, this screen may not be displayed.
you selected will be used for video output. Depending on the connector
selected in step 2, this screen may not be displayed.
14
Getting started
Setting up the PS3 system
If you select "HDMI", you will have the option to choose "Automatic" or
8 Confirm the settings, and then press the button. "Manual" on the next screen. In most cases, select "Automatic". If using a
The video output settings will be saved on the system. cable other than an HDMI cable to output audio from the TV, select "Audio US
Input Connector / SCART / AV MULTI". If using a digital optical cable to
output audio, select "Digital Out (Optical)" and choose the output format on
the next screen. FR
Hint
You can adjust audio output settings under (Settings) (Sound
Settings) "Audio Output Settings".
15
Basic operations
03 Turning the PS3 system on and off
Using a wireless controller
Press the PS button.
Turning off the system
Press and hold down the PS button for
PS button one second or longer. When the message
"Turn Off the System" is displayed on the
screen, select it, and then press the
button.
Hint
Before using a wireless controller, you must first
pair it with the system ( page 17).
1 Touch the power button. Power indicator status Turning off the system
Solid green System turned on
Touch the power button for two seconds
Flashing green System turning off or longer.
Solid red System off (in standby mode)
Notice
Off Main power switch off
Power button Do not use the main power switch on the
system rear to turn off a system that is not in
standby mode (power indicator red), as
doing so may cause data loss or damage to
Power indicator the system.
16
Basic operations
04 Using the wireless controller
Preparing for use Step 2: Assign a controller number
To use a wireless controller, you must first register or "pair" the Each time you turn on the system, a number must be assigned to the US
controller with the PS3 system and assign a number to the controller. controller.
FR
Step 1: Pair the system and the controller. Press the PS button. All of the port indicators flash.
When using for the first time 1 2 3 4 ES
When using with a different PS3 system
m
m When the controller has been assigned a
number, the port indicators for the
Step 2: Assign a controller number. assigned number turn solid red.
Every time the system is turned on 1 2 3 4
Step 1: Pair the system and the controller You can connect up to 7 controllers at one time. The controller
number is shown by the number above the port indicators. For
When using the controller for the first time or when using with a
numbers 5-7, add the numbers of the lit indicators.
different PS3 system, you must first pair the devices. If you turn on
the system and connect the controller using a USB cable, the pairing
will be completed automatically.
Example: Controller number 5 has
been assigned. 1 2 3 4
1
Hints
The USB cable can be connected or disconnected while the controller and
the system are turned on.
If the controller does not function, press the PS button, and then reassign the
controller number.
Charge Level
Charging the controller
With the system turned on (power indicator is lit solid green), connect
the controller to the system using a USB cable. The port indicators of
the controller flash slowly and charging begins.
The battery has plenty of charge.
When charging has completed, the port indicators stop flashing.
The battery has started losing its charge.
The controller can be used while charging. The battery has no charge. The port indicators of the controller flash
rapidly. Charge the controller.
Charge in an environment where the temperature range is between
10C - 30C (50F - 86F). Charging may not be as effective when performed
in other environments.
Hint
The battery has a limited lifespan. Battery duration will gradually decrease
with repeated usage and age. Depending on the environment or the conditions of use, the remaining charge
level may not display correctly and the battery duration may vary.
Battery life also varies depending on the storage method, usage state,
environment and other factors.
18
Basic operations
05 Playing content
Blu-ray Disc (BD)/DVD/CD
US
An icon is displayed in the home menu, and playback of the disc begins.
1 Insert the disc.
FR
ES
If the disc does not automatically start, select the icon for the disc from the
home menu, and then press the button.
Ejecting a disc
Stop playback, and then touch
Notices
the eject button.
Discs that are not compatible with the system cannot be
played. For details, refer to the "Safety and Support" Hint
document. For instructions on how to quit games,
To play commercially available BD video software, the see "Playing games" ( page 21).
encryption key* may need to be renewed. To renew the Eject indicator
key, you must update the system software
( page 30).
* AACS (Advanced Access Control System) key
Eject button
19
Basic operations
Playing content
Hints
External device such as a digital camera Only files that are playable or viewable on the PS3 system are displayed in
the column for the compatible category (Example: Image data is displayed in
2 Select the icon, and then press the button.
the Photo category).
Depending on the storage media, only a subset of the folders on the media
A list of playable content is displayed. may be displayed. If you select "Display All" from the options menu
( page 3), all folders saved on the media will be displayed.
Notice
For information on backing up files saved on the hard disk, refer to the
Safety and Support document.
20
Game
06 Playing games
Games that can be played on this system Quitting a game
During gameplay, press the PS button of the wireless controller. Then
US
PLAYSTATION3 format software select "Quit Game" from the screen that is displayed.
Can be played on this system *
PlayStation format software FR
Playing games
This model of the PLAYSTATION3 system is designed to play
PLAYSTATION3 format software and has limited backward Hint
compatibility. This system is not compatible with and will not play Use the following methods when playing software titles that specify the
PlayStation2 format software. Some PlayStation format software controller mode and controller port to use.
may play on this system. For more information, visit
Press the PS button of the wireless controller, select "Controller Settings"
www.us.playstation.com.
"Switch Analog Mode", and then select the appropriate mode. With some
software, the mode is switched automatically.
Starting a game Press the PS button of the wireless controller, select "Controller Settings"
When you insert the disc, the game starts automatically. "Reassign the Controller", and then assign the appropriate controller port.*
* You cannot assign controller port 2-D using this system.
Step 1: Create an internal memory card. Step 1: Create an internal memory card
Create an internal memory card within the hard disk as a replacement
for the actual memory card. 1 Select (Memory Card Utility (PS/PS2)) under (Game) in
the home menu, and then press the button.
Internal slots 3 Select "Internal Memory Card (PS)", and then press the
button.
Assign a name for the internal memory card, and then save the card.
Hint
Even if you create an "Internal Memory Card (PS2)" in step 3, you will not be
able to use it to play PlayStation2 format software.
22
Game
Playing games
Step 2: Assign a slot 2 Connect the memory card adaptor to the system, and then
insert the memory card.
US
1 Select (Memory Card Utility (PS/PS2)) under (Game) in The icon for (Memory Card (PS)) or (Memory Card (PS2)) is
the home menu, and then press the button. displayed.
FR
2 Select the internal memory card that you want to use, and 3 Select the saved data that you want to copy, and then press
then press the button. the button. ES
Assign a slot.
4 Select "Copy", and then press the button.
Hints Follow the on-screen instructions to complete the operation.
Depending on the software, slots may be preassigned. For details, refer to
the instructions supplied with the software. Hints
You can assign slots during gameplay. Press the PS button of the wireless This system can perform copy operations on saved data from PlayStation2
controller, and then select "Assign Slots" from the screen that is displayed. format software, but PlayStation2 format software itself cannot be played on
this model of the system.
If the amount of saved data to copy is large, the system will automatically
Using saved data on a memory card create multiple internal memory cards (PS).
You can copy data saved on the hard disk to a memory card (8MB) (for
You can copy saved data on a memory card (8MB) (for PlayStation2) PlayStation2), a memory card or a USB mass storage device (USB flash
or a memory card to the hard disk using a memory card adaptor drive, etc.). Select the saved data, and then select "Copy" from the options
(sold separately). menu ( page 3).
Some saved data may have restrictions that prevent copying of the data. In
Notice this case, select "Move" in step 4. The saved data is moved to the hard disk
and deleted from the memory card.
Even if you copy saved data from PlayStation2 format software to the hard
disk, you will not be able to play games on this model of the PS3 system
using this saved data.
23
Network
07 Adjusting network settings
Using a wired connection Preparing the required items
The following instructions explain how to connect to the Internet using The following items are required for a wired connection to the
a commercially available Ethernet cable. Internet.
A broadband Internet connection via a device such as a DSL or
Example of a wired network configuration cable modem (connection of multiple devices may require
additional hardware)
The network configuration and connection method may vary Commercially available Ethernet cable
depending on the equipment in use and the network environment.
Hint
Router
Network gateway Not necessary if the DSL or cable User is responsible for Internet service fees.
device such as a DSL modem or other network device has
or cable modem built-in router functionality
ETHER ETHER WAN LAN1 LAN2 LAN3 LAN4 Setting up the Internet connection
Internet connection settings vary according to the network
environment and the devices in use. The following procedure
describes a typical setup.
Hint
A router is a device that enables multiple devices to be connected to one
Internet line. A router is necessary if a PC and a PS3 system will be
connected to the Internet at the same time using one Internet connection.
24
Network
Adjusting network settings
3 Select "Easy", and then press the button. Using a wireless connection
The following instructions explain how to connect to the Internet using US
a wireless connection.
FR
PC PC
Hint
For some network environments, screens for setting options such as PPPoE,
proxy server, and IP address may be displayed during this procedure. If this Hints
happens, refer to the instructions supplied by your Internet service provider to An access point is a device that allows you to connect to a network wirelessly.
set the required items.
A wireless router is a device that adds access point functionality to a router.
A router is necessary if a PC and a PS3 system will be connected to the
Internet at the same time using one Internet connection.
25
Network
Adjusting network settings
Preparing the required items 1 Check that an Ethernet cable is not connected to the system.
The following items are required to set up the system to connect 2 Select (Network Settings) "Internet Connection
wirelessly to the Internet. Settings" under (Settings) in the home menu, and then
A broadband Internet connection via a device such as a DSL or press the button.
cable modem (connection of multiple devices may require When a message stating that the Internet connection will be terminated is
additional hardware) displayed, select Yes, and then press the button.
An access point or wireless router
Settings information for the access point (SSID, WEP key, WPA key) 3 Select "Easy", and then press the button.
Hints
SSID, WEP key, and WPA key are types of security information that are
required when connecting to an access point.
When connecting to the Internet wirelessly, signal interference may occur
depending on the usage condition of the wireless network devices. If Internet
data transfer speed is decreased or the wireless controller does not function
properly, use a commercially available Ethernet cable to connect to the
Internet.
Depending on the access point in use, you may need the MAC address for
your system when connecting to the Internet. You can find the MAC address
for the system by going to (Settings) (System Settings) "System
Information".
User is responsible for Internet service fees. Easy Basic settings are set automatically.
You can manually enter detailed settings information. For
Custom information on settings, refer to the instructions supplied
Setting up the Internet connection by the Internet service provider or with the network device.
26
Network
Adjusting network settings
4 Select "Wireless", and then press the button. 6 Select the access point that you want to use, and then press
the button.
US
An SSID is a code or a name that is assigned to the access point. If you do
not know which SSID to use or if the SSID is not displayed, contact the
person who set up or maintains the access point. FR
ES
7 Confirm the SSID for the access point, and then press the
button.
Hint
When using an access point that supports automatic setup, select "Automatic"
and follow the on-screen instructions. The required settings will be completed
automatically. For information on access points that support automatic setup,
contact the access point manufacturers.
27
Network
Adjusting network settings
8 Select the security settings as necessary, and then press the 10 Check the settings, and then press the button.
button. For detailed information on network settings, refer to the user's guide
Security settings vary depending on the access point in use. To determine ( page 29).
which settings to use, contact the person who set up or maintains the
access point. Hint
For some network environments, screens for setting options such as PPPoE,
proxy server, and IP address may be displayed during this procedure. If this
happens, refer to the instructions supplied by your Internet service provider to
set the required items.
28
Network
08 Connecting to the Internet
If network settings are already completed, the PS3 system will
automatically connect to the Internet when the system is turned on.
Viewing the user's guide
The connection will remain active as long as the system is on. You can use the Internet browser to view the user's guide for the US
PS3 system. Select (Online Instruction Manuals) under
Using the Internet browser (Network) in the home menu, and then press the button. FR
1 Select (Internet Browser) under (Network) in the home PLAYSTATION3 system user's guide ES
menu, and then press the button. http://manuals.playstation.net/document/
The guide can also be viewed using your PC's Web browser.
The Internet browser opens. A busy icon is displayed while the page is
loading.
29
Updates
09 PS3 system updates
By updating the PS3 system software, you can add features and/or
security patches. Frequently update your system to use the latest
Update methods
version of the system software. For the latest information on updates, You can perform an update in any of the ways described below.
visit http://www.us.playstation.com/PS3.
Network update
You can update by downloading the update data from the Internet.
The latest update is automatically downloaded.
Select (Settings) (System Update) "Update via Internet".
Use the update data to overwrite the The system software is updated.
existing system software.
Hint
Checking the system software version If you cannot perform an update in any of the ways described above, contact
SCEA Consumer Services at 1-800-345-7669.
You can check system version information by selecting (Settings)
(System Settings) "System Information". The current version is
displayed in the "System Software" field.
30
Security settings
10 Setting the parental control level
The PS3 system includes a parental control feature. You can use Game rating marks
this feature to set a password and limit the playback of content
Most game packaging displays a symbol to indicate the age group
restricted by a parental control level (games, videos and other US
that is appropriate to play the game. The symbols correspond to the
content). By setting the parental control level on the system, you can
parental control levels set on the games as shown below.
prevent the playback of restricted content by children. FR
Age group
ES
Changing the security settings
Game parental control 2 3 4 5 9 10
level
You can set a parental control level for games or Blu-ray Discs or
Based on information at time of publication. For information about games and related
other content under (Settings) (Security Settings).
ESRB ratings, visit our Web site at http://www.us.playstation.com. For the latest
A password is required to change parental control settings. You can information about the ESRB rating system, visit http://www.esrb.org.
set a password under (Security Settings) Change Password.
The password is set to 0000 in the default settings.
Other security settings
Parental control levels for games You can set parental control limitations on content other than games
under (Security Settings), as described below.
You can set the parental control level for games under (Security
Settings) Parental Control. Select from Off or one of 11 levels. When playing a BD with parental control settings, restrict
BD Parental playback based on the age you have set. The lower the
Control setting, the tighter the restriction.
Off Play any content regardless of parental control level.
Set the parental control level based on the number. Note that the lower When playing a DVD with parental control settings, restrict
11-1 the number, the tighter the restriction. DVD Parental playback based on the level you have set.
Control Select from Off or one of eight levels.
The lower the number, the tighter the restriction.
The combination of the parental control levels of both the PS3
Internet Browser Restrict the ability to start the Internet Browser with a
system and the content determine whether the content can be Start Control password.
played.
Example: If the parental control level of the system is set to 7,
content with a level from 1 to 7 can be played on the system.
31
Keyboard
11 Using the on-screen keyboard
Displays predictive
options List of keys
Keys that are displayed vary depending on the input mode and other
conditions.
Cursor Text entry field
Keys Explanation
Inserts a space
32
Keyboard
Using the on-screen keyboard
Entering characters
Using predictive mode, you can enter the first few letters of the word, US
which will bring up a list of commonly used words that start with these
letters. You can then use the directional buttons to select the word FR
that you want. After you have finished entering text, select the "Enter"
key to exit the keyboard. ES
Hints
The languages you can use for text entry are the supported system
languages. You can set the system language by going to (Settings)
(System Settings) "System Language".
Example: If "System Language" is set to "Franais", you can enter text in
French.
Emoticons can be entered only when creating a message under
(Friends).
Hint
You cannot use predictive mode when using an external keyboard.
33
Amis
propos de la documentation du systme PS3
Salons de discussion et change de
La documentation du systme PS3 comprend les lments suivants : messages
Scurit et support technique
Avant d'utiliser le produit, lisez d'abord attentivement ce document. Il contient des PLAYSTATIONNetwork
informations de scurit lies l'utilisation du systme PS3, son dpannage, ses
caractristiques, ainsi que d'autres donnes. Utilisation des services
PLAYSTATIONNetwork
Aide-mmoire (le prsent document)
Le prsent document contient des informations sur la configuration du systme PS3, sur
sa prparation l'utilisation et sur les oprations de base du matriel. Rseau
Mode d'emploi (http://manuals.playstation.net/document/) Connexion Internet
Ce document en ligne est accessible par le biais d'Internet et contient des informations
dtailles relatives l'utilisation du logiciel du systme PS3 ( page 61).
Jeu
Utilisation de jeux
Vido
Lecture de vidos
Vrifiez que vous disposez de tous les lments suivants. S'il manque des
lments, appelez le Service consommateurs SCEA au 1-800-345-7669.
Musique
Lecture de musique
s Cordon
Photo
d'alimentation
s Systme PLAYSTATION3
Affichage d'images
Paramtres
s Cble AV
Rglage des paramtres du systme
s Manette sans fil SIXAXIS PS3
Utilisateurs
s Documentation
s Cble USB Slection des utilisateurs qui peuvent
se connecter au systme PS3
34
Utilisation de la barre "XMB"
Menu d'accueil
(XrossMediaBar)
Le systme PS3 possde une interface utilisateur appele "XMB"
(XrossMediaBar). L'cran principal de l'interface "XMB" est appel
Catgorie "menu d'accueil". US
Touche :
Valide l'option slectionne
Conseil
Le systme peut tre install en position horizontale ou
verticale. Placez-le tel qu'indiqu dans le schma droite
en position verticale.
Attention
N'utilisez pas le systme dans une armoire ferme ou tout endroit o la Notice
chaleur peut s'accumuler. Ceci pourrait provoquer la surchauffe du
Ne placez pas le systme dans une zone soumise
systme et mener des incendies, des blessures ou des dfaillances.
une poussire excessive ou de la fume de cigarette.
Si la temprature interne du systme est leve', l'indicateur d'alimentation L'accumulation de poussire ou les rsidus de fume
clignote alternativement en rouge et en vert. Dans ce cas, teignez le
de cigarette sur les composants internes (tels que les
systme ( page 48) et ne l'utilisez pas pendant un certain temps. Aprs
lentilles) peut entraner un dysfonctionnement du
que le systme a refroidi, dplacez-le vers un endroit bien ventil et
recommencez l'utiliser. systme.
36
Prparation
Nom des pices
Conseils
Pour plus de dtails sur la manette sans fil, consultez la section "Utilisation
de la manette sans fil" ( page 49).
La manette sans fil SIXAXIS fournie avec ce systme n'est pas dote de la
fonction de vibration.
Notice
Certains priphriques PlayStation et PlayStation2 tels que les manettes
analogiques (DUALSHOCK) et les manettes analogiques (DUALSHOCK2)
ne sont pas compatibles avec le systme PS3. Pour plus de dtails,
visitez le site Web http://www.us.playstation.com.
37
Prparation
02 Configuration du systme PS3
Procdure de configuration du tape 1 : Connexion un tlviseur
systme
Sortie vido sur le systme PS3
tape 1 : Connexion un tlviseur
Page 38 Le systme PS3 peut reproduire deux types de rsolution : HD et SD. Pour dterminer le mode
vido pris en charge, reportez-vous au mode d'emploi du tlviseur que vous utilisez.
m HD (High Definition) SD (Standard Definition)
tape 2 : Connexion de priphriques Mode vido *1 1080p 1080i 720p 480p 480i *2
audio numriques Rapport d'aspect 16:9 16:9 16:9 16:9 16:9
4:3 4:3
Page 41
*1 Ce nombre indique le nombre de lignes de balayage. Remarquez que "i" est l'abrviation de "interlace" et "p"
m de "progressive". L'utilisation du mode progressive reproduit des donnes vido de haute qualit, avec un
scintillement minimal.
tape 3 : Connexion d'un cble *2 Le paramtre de sortie vido du systme, "Standard (NTSC)", s'affiche.
Ethernet Page 42
Captures d'crans illustrant la diffrence de rsolution
m
tape 4 : Connexion du cordon
d'alimentation
Page 43
m
tape 5 : Configuration initiale du cran HD cran SD
logiciel du systme
Page 43
38
Prparation
Configuration du systme PS3
ES
Cble HDMI Connecteur HDMI IN 1080p / 1080i / 720p / 480p
(vendu sparment)
S VIDEO L-AUDIO-R
Cble S VIDEO Connecteur S VIDEO IN 480i*2
(vendu sparment)
*1 Selon le type de tlviseur ou de contenu affich, il est possible que certains modes vido ne soient pas pris en charge.
Si vous connectez un priphrique non compatible avec la norme HDCP (High-bandwidth Digital Content Protection) au systme l'aide d'un cble HDMI, les
donnes vido et/ou audio ne peuvent pas tre reproduites partir du systme.
Les disques vidos protgs par droits d'auteur Blu-ray peuvent tre reproduits 1080p en utilisant un cble HDMI connect un priphrique compatible avec
la norme de protection des contenus numriques en haute dfinition HDCP (High-bandwidth Digital Content Protection).
*2 Le paramtre de sortie vido du systme, "Standard (NTSC)", s'affiche.
39
Prparation
Configuration du systme PS3
Connectez le systme au tlviseur l'aide d'un cble HDMI (vendu Exemple : En cas d'utilisation du cble AV fourni
sparment). Un cble HDMI peut reproduire la fois les donnes
vido et audio. Il vous permet de profiter de sons et de vidos de
qualit numrique avec une perte de qualit d'image minimale.
Cble HDMI
Tlviseur (vendu sparment)
Conseil
Lorsque vous changez de type de cble utilis pour connecter le sytme, il est
possible que la vido ne s'affiche plus. Dans ce cas, teignez le systme, puis
allumez-le nouveau en appuyant sur la touche d'alimentation l'avant du
Connecteur HDMI IN Connecteur HDMI OUT
systme pendant au moins 5 secondes (jusqu' ce qu'il bipe deux fois). Le
paramtre de sortie vido sera alors rinitialis la rsolution standard.
40
Prparation
Configuration du systme PS3
tape 2 : Connexion de priphriques audio numriques Connexion l'aide d'un cble optique
Vous pouvez raccorder des priphriques audio prenant en charge La partie audio sera reproduite partir du cble optique. La partie US
la sortie audio numrique, tels qu'un rcepteur AV pour l'utilisation vido sera reproduite partir du cble de sortie vido.
d'un systme home cinma. FR
Conseil ES
Cble optique pour le son
Lors de la connexion d'un priphrique audio numrique au systme, allez
(vendu sparment)
(Paramtres) (Paramtres son) "Paramtres de sortie audio", et si
besoin, rglez les paramtres pour le priphrique audio.
Cble de sortie
vido adapt au
tlviseur utilis
Sortie audio sur le systme PS3 ( page 39)
Les canaux pris en charge peuvent varier selon le connecteur de
sortie utilis.
*1 Vous devez disposer d'un priphrique compatible avec PCM linaire 7.1 Conseil
canaux pour reproduire du son 7.1 canaux partir du connecteur HDMI En principe, la sortie audio ne peut pas s'effectuer simultanment sur plusieurs
OUT. connecteurs de sortie. Par exemple, si votre systme PS3 est connect un
*2 Ce systme ne prend pas en charge la sortie DTS-HD 7.1 canaux. Le son tlviseur via un cble HDMI et un priphrique de sortie audio via un cble
DTS-HD 7.1 canaux est reproduit par un systme 5.1 canaux ou infrieur. optique numrique, et que l'option "Sortie numrique (optique)" est rgle sur
"Paramtres de sortie audio", la sortie audio ne s'effectue plus vers le tlviseur
mais seulement vers le priphrique de sortie audio.
41
Prparation
Configuration du systme PS3
Connexion l'aide d'un cble HDMI tape 3 : Connexion d'un cble Ethernet
Le son et la vido sont reproduits partir du cble HDMI. Vous A l'aide d'un cble Ethernet disponible dans le commerce, vous
pouvez reproduire l'image du tlviseur par l'intermdiaire d'un pouvez connecter le systme Internet. Pour plus de dtails sur les
priphrique audio. paramtres rseau, consultez la section "Dfinition des paramtres
du rseau" ( page 56).
Attention
Le systme prend en charge les rseaux 10BASE-T, 100BASE-TX et
1000BASE-T. Ne raccordez pas directement au connecteur LAN du systme
une ligne tlphonique standard ou d'autres types de cordons ou cbles
non compatibles avec le systme, car cela pourrait entraner un excs de
chaleur, un incendie ou un dysfonctionnement.
Tlviseur
Conseils
Si votre tlviseur n'est pas quip d'un connecteur d'entre HDMI, utilisez Conseil
un cble de sortie vido de type adapt au tlviseur ( page 39) afin de Vous pouvez vous connecter Internet sans utiliser de cble Ethernet. Pour
le raccorder directement au systme PS3. plus de dtails, consultez la section "Utilisation d'une connexion sans fil"
Si un priphrique est connect la console PS3 par un cble HDMI, ( page 57).
n'teignez pas le priphrique tandis que le systme est en marche
(l'indicateur d'alimentation est fixe en vert). Cette action pourrait provoquer
des distorsions sonores ou des sons anormaux.
42
Prparation
Configuration du systme PS3
Indicateur d'alimentation
43
Prparation
Configuration du systme PS3
4 Connectez la manette sans fil au systme l'aide d'un cble 6 Excution de la configuration initiale.
USB.
Connecteur USB
Une fois les paramtres dfinis, le menu d'accueil ( page 35) s'affiche
5 Appuyez sur la touche PS de la manette. sur l'cran du tlviseur.
Le systme reconnat la manette. Une fois la manette reconnue, l'cran de
configuration initiale s'affiche. Conseils
Lorsque vous utilisez un cble HDMI pour raccorder le systme au tlviseur,
un cran s'affiche durant la configuration initiale pour la modification de la
rsolution de sortie vido. Si vous slectionnez "Oui" sur cet cran, puis
appuyez sur la touche , la rsolution de sortie optimale sera
automatiquement slectionne.
Pour plus de dtails sur la saisie de texte, consultez la section "Utilisation du
clavier virtuel" ( page 64).
Les paramtres saisis pendant la configuration initiale peuvent tre modifis
sous (Paramtres) ou (Utilisateurs). Pour plus de dtails, reportez-
44 vous au Mode d'emploi ( page 61).
Prparation
Configuration du systme PS3
Si la vido ne s'affiche pas sur le tlviseur, effectuez les oprations suivantes : Si vous avez chang de connecteur l'tape 2, un cran de confirmation
de ce changement s'affichera.
Changez d'entre vido sur le tlviseur pour celle correspondant au
connecteur d'entre utilis pour le raccordement au systme. 4 Confirmez les paramtres, slectionnez "Oui", puis appuyez
teignez le systme, puis allumez-le nouveau en appuyant sur la touche sur la touche .
d'alimentation l'avant du systme pendant au moins 5 secondes (jusqu'
ce qu'il bipe deux fois). Le paramtre de sortie vido sera alors rinitialis Si vous avez chang de connecteur l'tape 2, un cran de confirmation
la rsolution standard. des paramtres s'affichera.
45
Prparation
Configuration du systme PS3
5 Slectionnez les rsolutions prises en charge par le 6 Confirmez les paramtres, slectionnez "Oui", puis appuyez
tlviseur, puis appuyez sur la touche . sur la touche .
La rsolution affiche sur le tlviseur varie en fonction du connecteur Selon le connecteur slectionn l'tape 2 et les rsolutions slectionnes
d'entre et du type de cble utiliss ( page 39). La rsolution la plus l'tape 5, il est possible que cet cran ne s'affiche pas.
leve que vous ayez slectionne sera utilise pour la sortie vido. Selon
le connecteur slectionn l'tape 2, il est possible que cet cran ne
s'affiche pas.
46
Prparation
Configuration du systme PS3
Conseil ES
Vous pouvez rgler les paramtres de sortie audio sous (Paramtres)
(Paramtres son) "Paramtres de sortie audio".
47
Oprations de base
03 Mise sous et hors tension du systme PS3
Utilisation d'une manette sans fil
Appuyez sur la touche PS.
Mise hors tension du systme
Maintenez la touche PS enfonce
pendant au moins une seconde. Lorsque
Touche PS le message "Eteindre le systme"
s'affiche, slectionnez-le, puis appuyez
sur la touche .
Conseil
Avant d'utiliser une manette sans fil, vous devez
l'associer au systme ( page 49).
1 Appuyez sur la touche Etat de l'indicateur d'alimentation Mise hors tension du systme
d'alimentation.
Vert Le systme est sous tension Appuyez sur la touche d'alimentation
Vert clignotant Le systme se met hors tension pendant au moins deux secondes.
Le systme est hors tension (en
Rouge mode veille) Notice
L'interrupteur d'alimentation N'utilisez pas l'interrupteur d'alimentation
teint principal MAIN POWER est principal MAIN POWER situ l'arrire du
Touche d'alimentation dsactiv systme pour mettre celui-ci hors tension s'il
n'est pas en mode veille (indicateur
d'alimentation rouge), car cela risque de
l'endommager ou de supprimer des
Indicateur d'alimentation donnes.
48
Oprations de base
04 Utilisation de la manette sans fil
Prparation l'utilisation tape 2 : Attribuez un numro la manette
Pour utiliser une manette sans fil, vous devez d'abord enregistrer ou A chaque dmarrage du systme, un numro doit tre attribu la US
"associer" la manette au systme PS3, puis lui attribuer un numro. manette.
FR
tape 1 : Associez le systme la manette. Appuyez sur la touche PS. Tous les indicateurs de port clignotent.
Lors de la premire utilisation 1 2 3 4 ES
Lors de l'utilisation avec un autre systme PS3
m
m Lorsque vous avez attribu un numro la
manette, les indicateurs de port correspondant
tape 2 : Attribuez un numro la manette. ce numro s'allument en rouge.
A chaque mise sous tension du systme 1 2 3 4
Conseils
Le cble USB peut tre branch ou dbranch alors que la manette et le
systme sont sous tension.
Si la manette ne fonctionne pas, appuyez sur la touche PS, puis raffectez le
numro de la manette.
50
Oprations de base
05 Lecture de contenu
Blu-ray Disc (BD)/DVD/CD
US
Une icne apparat dans le menu d'accueil et la lecture du disque
1 Insrez le disque. commence.
FR
ES
2 Slectionnez l'icne, puis appuyez sur la touche . Seuls les fichiers lisibles ou affichables sur le systme PS3 apparaissent
dans la colonne de la catgorie compatible (exemple : les donnes image
La liste du contenu lisible s'affiche. s'affichent dans la colonne Photo).
Selon le support de stockage, il se peut que seul un sous-ensemble des
dossiers enregistrs sur le support s'affiche. Si vous slectionnez "Afficher
tout" dans le menu d'options ( page 35), tous les dossiers enregistrs sur
le support s'affichent.
Notice
Pour plus d'informations sur la sauvegarde des fichiers enregistrs sur le
disque dur, reportez-vous au document Scurit et support technique.
52
Jeu
06 Utilisation de jeux
Jeux compatibles avec ce systme Fermeture d'un jeu
Pendant le jeu, appuyez sur la touche PS de la manette sans fil.
US
Logiciel au format PLAYSTATION3 Slectionnez ensuite "Quitter le jeu" depuis l'cran affich.
Compatible avec ce systme *
Logiciel au format PlayStation FR
Jouer
Ce modle de systme PLAYSTATION3 est conu pour l'excution
des logiciels au format PLAYSTATION3 et n'offre qu'une
Conseil
compatibilit rtroactive limite. Ce systme n'est pas compatible
Pendant la lecture de logiciels prcisant le port et le mode d'utilisation de la
avec les logiciels au format PlayStation2 et ne peut pas les lire. manette procder comme suit.
Certains logiciels au format PlayStation peuvent tre lus sur ce
Appuyez sur la touche PS de la manette sans fil, slectionnez "Paramtres
systme. Pour plus d'informations, visiter www.us.playstation.com.
manette" "Changer mode analogique", puis slectionnez le mode
appropri. Avec certains logiciels, le mode est automatiquement chang.
Dmarrage d'un jeu Appuyez sur la touche PS de la manette sans fil, slectionnez "Paramtres
Lorsque vous insrez le disque, le jeu dmarre automatiquement. manette" "Affecter la manette nouveau", puis affectez le chiffre
correspondant la manette approprie. *
* Le port de manette 2D ne peut pas tre affect en utilisant ce systme.
Fentes internes 3 Slectionner "Memory Card (PS) interne", puis appuyer sur la
touche .
Affecter un nom la Memory Card interne, puis la sauvegarder.
Conseil
Mme si, lors de l'tape 3, vous crez une "Memory Card (PS2) interne", vous
ne pourrez pas l'utiliser pour jouer avec des logiciels au format PlayStation2.
54
Jeu
Utilisation de jeux
tape 2 : Attribution d'une fente 1 Slectionnez (Utilitaire de Memory Card (PS/PS2)) sous
(Jeu) dans le menu d'accueil, puis appuyez sur la
US
1 Slectionnez (Utilitaire de Memory Card (PS/PS2)) sous touche .
(Jeu) dans le menu d'accueil, puis appuyez sur la
touche . 2 Raccordez l'adaptateur pour Memory Card (carte mmoire) au FR
systme et insrez la Memory Card (carte mmoire).
2 Slectionnez la Memory Card interne de votre choix, puis L'icne (Memory Card (PS) ou (Memory Card (PS2)) s'affiche. ES
appuyez sur la touche .
Attribuez-lui une fente.
3 Slectionnez les donnes sauvegardes que vous souhaitez
copier, puis appuyez sur la touche .
Conseils
Selon le logiciel, il se peut que les fentes soient prattribues. Pour plus de
4 Slectionnez "Copier", puis appuyez sur la touche .
dtails, reportez-vous aux instructions qui accompagnent le logiciel. Conformez-vous aux instructions affiches pour achever l'opration.
Vous pouvez assigner des fentes pendant le jeu. Appuyez sur la touche PS Conseils
de la manette sans fil, puis slectionnez "Affecter fentes" dans l'cran affich.
Bien que ce systme puisse effectuer des copies de donnes sauvegardes
au format PlayStation2, les logiciels de ce format ne peuvent pas tre lus
Utilisation des donnes sauvegardes sur une Memory sur ce modle du systme.
Card (carte mmoire) Si la quantit de donnes sauvegardes copier est volumineuse, le
systme cre automatiquement plusieurs Memory Cards (PS) internes.
Vous pouvez copier des donnes sauvegardes sur le disque dur vers une
Vous pouvez copier des donnes sauvegardes sur une Memory Memory Card (carte mmoire) (8 MB) (pour PlayStation2), une Memory
Card (carte mmoire) (8 MB) (pour PlayStation2) ou une Memory Card (carte mmoire) ou un priphrique de stockage de masse USB (cl
Card (carte mmoire) vers le disque dur en utilisant un adaptateur USB mmoire flash, etc.). Slectionnez les donnes sauvegardes, puis
pour Memory Card (carte mmoire) (vendu sparment). slectionnez "Copier" dans le menu d'options ( page 35).
Certaines donnes sauvegardes peuvent s'accompagner de restrictions qui
Notice empchent leur copie. Dans ce cas, slectionnez "Dplacer" l'tape 4. Les
donnes sauvegardes sont dplaces vers le disque dur et supprimes de
Mme si vous copiez des donnes sauvegardes au format PlayStation2 la Memory Card (carte mmoire).
sur le disque dur, vous ne pourrez jouer aucun jeu sur ce modle de
systme PS3 avec ces donnes sauvegardes.
55
Rseau
07 Dfinition des paramtres du rseau
Utilisation d'une connexion par cble Prparation des lments ncessaires
Les instructions suivantes expliquent comment se connecter Les lments suivants sont ncessaires pour une connexion cble
Internet l'aide d'un cble Ethernet disponible dans le commerce. Internet.
Une connexion Internet haut dbit par l'intermdiaire d'un
Exemple de configuration rseau cble priphrique de type modem DSL ou cble (la connexion de
plusieurs priphriques peut ncessiter du matriel
La configuration rseau et la mthode de connexion peuvent varier supplmentaire)
en fonction de l'appareil utilis et de l'environnement rseau. un cble Ethernet disponible dans le commerce
Priphrique de Routeur
passerelle rseau, Pas ncessaire si le modem DSL ou cble Conseil
tel qu'un modem ou l'autre priphrique rseau possde L'utilisateur est responsable des frais des services Internet.
DSL ou cble des fonctionnalits de routeur intgres
ETHER ETHER WAN LAN1 LAN2 LAN3 LAN4
3 Slectionnez "Facile", puis appuyez sur la touche . Utilisation d'une connexion sans fil
Les instructions suivantes expliquent comment se connecter US
Internet l'aide d'une connexion sans fil.
FR
57
Rseau
Dfinition des paramtres du rseau
Prparation des lments ncessaires 1 Vrifiez qu'aucun cble Ethernet n'est connect au systme.
Conseils
SSID, la cl WEP et la cl WPA sont des types d'informations de scurit
requis pour se connecter un point d'accs.
Lors de la connexion Internet sans fil, des interfrences dans les signaux
peuvent survenir selon les conditions d'usage des appareils du rseau sans
fil. Si la vitesse de transfert des donnes Internet diminue ou si la manette
sans fil ne fonctionne pas correctement, connectez-vous Internet par
l'intermdiaire d'un cble Ethernet disponible dans le commerce.
Selon le point d'accs utilis, il se peut que vous deviez disposer de
l'adresse MAC de votre systme lors de la connexion Internet. Pour
dterminer l'adresse MAC du systme, accdez (Paramtres)
(Paramtres systme) "Informations systme".
Facile Les paramtres de base sont dfinis automatiquement.
L'utilisateur est responsable des frais des services Internet.
Vous pouvez saisir manuellement des informations
dtailles sur les paramtres. Pour plus d'informations sur
Personnalis les paramtres, reportez-vous aux instructions fournies par
Configuration de la connexion Internet le fournisseur de services Internet ou qui accompagnent le
priphrique rseau.
Les paramtres de connexion Internet varient selon l'environnement
rseau et les appareils utiliss. La procdure suivante dcrit une
configuration standard.
58
Rseau
Dfinition des paramtres du rseau
4 Slectionnez "Sans fil", puis appuyez sur la touche . 6 Slectionnez le point d'accs que vous souhaitez utiliser,
puis appuyez sur la touche .
US
Un SSID est un code ou un nom attribu au point d'accs. Si vous ne
savez pas quel SSID utiliser ou si le SSID ne s'affiche pas, contactez la
personne qui a configur ou qui gre le point d'accs. FR
ES
Conseil
Si vous utilisez un point d'accs prenant en charge la configuration
automatique, slectionnez "Automatique" et conformez-vous aux instructions
affiches. Les paramtres ncessaires sont dfinis automatiquement. Pour plus
d'informations sur les points d'accs prenant en charge la configuration
automatique, contactez les fabricants des points d'accs.
59
Rseau
Dfinition des paramtres du rseau
8 Le cas chant, slectionnez les paramtres de scurit, puis 10 Vrifiez les paramtres, puis appuyez sur la touche .
appuyez sur la touche . Pour obtenir des informations dtailles sur les paramtres rseau,
Les paramtres de scurit varient selon le point d'accs utilis. Pour reportez-vous au Mode d'emploi ( page 61).
dterminer les paramtres utiliser, contactez la personne qui a configur
ou qui gre le point d'accs. Conseil
Dans certains environnements rseau, les crans de dfinition d'options telles
que PPPoE, le serveur proxy et l'adresse IP peuvent s'afficher au cours de
cette procdure. Si c'est le cas, reportez-vous aux instructions fournies par
votre fournisseur de services Internet pour dfinir les lments requis.
60
Rseau
08 Connexion Internet
Si les paramtres rseau sont dj dfinis, le systme PS3 se
connecte automatiquement Internet, une fois le systme mis sous
Affichage du Mode d'emploi
tension. La connexion reste active aussi longtemps que le systme Vous pouvez utiliser le navigateur Internet pour afficher le Mode US
est allum. d'emploi du systme PS3. Slectionnez (Mode d'emploi en ligne)
sous (Rseau) dans le menu d'accueil, puis appuyez sur la FR
Utilisation du navigateur Internet touche .
ES
Mode d'emploi du systme PLAYSTATION3
1 Slectionnez (Navigateur Internet) sous (Rseau) dans
http://manuals.playstation.net/document/
le menu d'accueil, puis appuyez sur la touche .
Vous pouvez galement le consulter l'aide du navigateur Web de votre
Le navigateur Internet s'ouvre. Une icne Occup s'affiche pendant le PC.
chargement de la page.
Dplace le curseur
Insre un espace
64
Clavier
Utilisation du clavier virtuel
Saisie de caractres
Le mode de saisie prdictive vous permet de saisir les premires US
lettres du mot et d'afficher ainsi la liste des mots les plus courants
commenant par ces lettres. Vous pouvez ensuite choisir le mot FR
voulu l'aide des touches de navigation. Lorsque vous avez termin
de saisir du texte, slectionnez la touche "Entrer" pour quitter le ES
clavier.
Conseils
Les langues que vous pouvez utiliser pour la saisie de texte sont les langues
systme prises en charge. Vous pouvez dfinir la langue systme en
accdant (Paramtres) (Paramtres systme) "Langue
systme".
Exemple : Si "Langue systme" a la valeur "Franais", vous pouvez saisir du
texte en franais.
Les moticnes peuvent tre saisies uniquement lors de la cration d'un
message sous (Amis).
Conseil
Le mode de saisie prdictive n'est pas disponible lors de l'utilisation d'un
clavier externe.
65
Acerca de la documentacin del sistema PS3 Amigos
Conversacin e intercambio de
La documentacin del sistema PS3 incluye lo siguiente:
mensajes
Seguridad y soporte tcnico
Antes de utilizar el producto, lea detenidamente este documento. Contiene informacin
PLAYSTATIONNetwork
sobre la seguridad relacionada con el uso del sistema PS3, resolucin de problemas,
especificaciones y otra informacin. Utilizacin de servicios
PLAYSTATIONNetwork
Referencia rpida (este documento)
Este documento contiene informacin sobre la configuracin del sistema PS3, la Red
preparacin para su uso y la realizacin de operaciones bsicas con el hardware.
Jugar a juegos
Vdeo
Reproduccin de vdeos
Compruebe que dispone de los siguientes elementos. Si falta algn elemento,
pngase en contacto con el servicio de atencin al cliente SCEA a travs del Msica
nmero de telfono 1 -800-345-7669 (EE. UU.).
Reproduccin de msica
Foto
s Cable de
alimentacin AC Visualizacin de imgenes
s Sistema PLAYSTATION3
Ajustes
s Cable AV Configuracin de los ajustes del
sistema PS3
s Mando inalmbrico SIXAXIS Usuarios
s Materiales impresos s Cable USB Seleccin de los usuarios que podrn
iniciar sesin en el sistema PS3
66
Men principal Uso de la barra "XMB" (XrossMediaBar)
El sistema PS3 incluye una interfaz de usuario llamada "XMB"
(XrossMediaBar). La pantalla principal de "XMB" se denomina
"men principal"
Categora
US
Seleccione una categora mediante
1 el botn o . FR
botn o .
Botones direccionales:
se utilizan para seleccionar categoras/ Botn : muestra las opciones del men/panel de control
elementos en pantalla.
Si selecciona un icono y pulsa el Si pulsa el botn durante la
Botn PS botn , aparecer el men de reproduccin del contenido, aparecer
muestra el men principal
enciende/apaga el sistema opciones. el panel de control.
Botn :
confirma el elemento seleccionado
67
Procedimientos iniciales
01 Nombres de los componentes
Parte frontal del sistema Parte posterior del sistema
Logotipo de la familia PS
Se puede girar para que coincida
con la posicin del sistema Conector AV MULTI OUT
Conector DIGITAL OUT (OPTICAL)
Nota
El sistema puede situarse en posicin horizontal o vertical.
Siga el diagrama de la derecha para colocarlo en posicin
vertical.
Precaucin
No use el sistema en un armario cerrado ni en otras ubicaciones en las
que pueda acumularse calor. Si lo hace el sistema puede sobrecalentarse Aviso
y provocar incendios, lesiones o averas.
No coloque el sistema en un rea donde haya exceso
Si la temperatura interna del sistema aumenta demasiado, el indicador de
de polvo o humo de cigarrillos. La acumulacin de
encendido parpadear alternativamente en rojo y verde. En ese caso,
apague el sistema ( pgina 80) y no lo utilice durante un tiempo. suciedad o residuos de humo de cigarrillos en los
Cuando el sistema se enfre, trasldelo a una ubicacin bien ventilada y componentes internos (como los lectores pticos)
luego reanude su uso. puede ocasionar fallos en el sistema.
68
Procedimientos iniciales
Nombres de los componentes
Notas
Para obtener ms informacin acerca del mando inalmbrico, consulte
"Utilizacin del mando inalmbrico" ( pgina 81).
El mando inalmbrico SIXAXIS suministrado con este sistema no viene
equipado con la funcin de vibracin.
Aviso
Algunos perifricos de PlayStation y PlayStation2, como el control
analgico (DUALSHOCK) y el control analgico (DUALSHOCK2) no son
compatibles con el sistema PS3. Para obtener ms detalles, visite la
pgina Web http://www.us.playstation.com.
69
Procedimientos iniciales
02 Configuracin del sistema PS3
Flujo de procedimiento para Paso 1: conecte el sistema a un televisor
configurar el sistema
Salida de vdeo del sistema PS3
Paso 1: conecte el sistema a un
televisor Pgina 70 El sistema PS3 puede mostrar dos tipos de resoluciones: HD y SD. Consulte el manual de
instrucciones del televisor que est utilizando para comprobar el modo de vdeo compatible.
m *1 Este nmero indica el nmero de lneas de exploracin. Tenga en cuenta que "i" significa "entrelazar" y "p" significa
"progresivo". El uso del modo progresivo da como resultado vdeo de alta calidad con parpadeo mnimo.
*2 Los ajustes de salida de vdeo del sistema se mostrarn como "Estndar (NTSC)".
Paso 3: conecte un cable
Ethernet Pgina 74
Pantallas que muestran la diferencia en la resolucin
m
Paso 4: conecte el cable de
alimentacin AC
Pgina 75
m
Paso 5: configuracin inicial del Pantalla HD Pantalla SD
software del sistema
Pgina 75
70
Procedimientos iniciales
Configuracin del sistema PS3
Cable HDMI ES
(se vende por separado) Conector HDMI IN 1080p / 1080i / 720p / 480p
S VIDEO L-AUDIO-R
Cable S VIDEO
(se vende por separado) Conector S VIDEO IN 480i*2
*1 Es posible que algunos modos de vdeo no se reconozcan segn el tipo de televisor o el contenido reproducido.
Si se conecta un dispositivo no compatible con el estndar HDCP (High-bandwidth Digital Content Protection, Proteccin de contenido digital de alto ancho de
banda) al sistema mediante un cable HDMI, no se podr emitir vdeo ni audio.
Discos de video Blu-ray protegidos por derechos de autor solo pueden enviar seal a 1080p utilizando un cable HDMI conectado a un dispositivo que sea
compatible con la norma de Proteccin de Contenido Digital de banda ancha).
*2 Los ajustes de salida de vdeo del sistema se mostrarn como "Estndar (NTSC)".
71
Procedimientos iniciales
Configuracin del sistema PS3
Cable HDMI
Televisor (se vende por separado)
Nota
Si cambia el tipo de cable utilizado para conectar el sistema, es posible que no
Conector HDMI IN Conector HDMI OUT se visualice el vdeo. Si esto ocurre, apague el sistema y vuelva a encenderlo
pulsando el botn de encendido en la parte frontal del sistema por al menos
cinco segundos (hasta que el sistema emita dos pitidos). Los ajustes de salida
de vdeo se restablecern a la resolucin estndar.
72
Procedimientos iniciales
Configuracin del sistema PS3
Paso 2: conecte los dispositivos de sonido digital Conexin con un cable ptico
Es posible conectar dispositivos de audio que admitan la salida de El audio se emitir a travs del cable ptico. El vdeo se emitir a US
audio digital, como un receptor de AV para fines de entretenimiento travs del cable de salida de vdeo.
domstico. FR
Nota
ES
Al conectar un dispositivo de audio digital al sistema, vaya a (Ajustes) Cable ptico para audio
(Ajustes de sonido) "Ajustes de salida de audio" y, a continuacin, (se vende por separado)
configure los ajustes segn sea necesario para el dispositivo de audio. Cable de salida
de vdeo para
el televisor
Salida de audio del sistema PS3 utilizado
( pgina 71)
Los canales admitidos pueden variar en funcin del conector de
salida que se vaya a utilizar.
Conectores de salida del sistema Canales que se pueden utilizar para la salida
PS3 2 canales 5.1 canales 7.1 canales
Conector AV MULTI OUT
Conector DIGITAL OUT
(OPTICAL)
Televisor Dispositivo de audio digital
Conector HDMI OUT *1 *2 como, por ejemplo, un
receptor de AV
*1 Es necesario un dispositivo compatible con el PCM lineal de 7.1 canales
para emitir audio de 7.1 canales desde el conector HDMI OUT.
*2 Este sistema no admite la emisin desde el formato DTS-HD de 7.1 canales. Nota
El audio DTS-HD de 7.1 canales se emite desde 5.1 o un canal inferior. Normalmente no se puede reproducir sonido simultneamente desde varios
conectores de salida. Por ejemplo, si su sistema PS3 est conectado a un
televisor mediante de un cable HDMI y a un dispositivo de audio mediante un
cable ptico digital y si "Salida digital (ptica)" est configurada en "Ajustes de
salida de audio", el sonido no se reproducir por el televisor, sino slo por el
dispositivo de audio.
73
Procedimientos iniciales
Configuracin del sistema PS3
Precaucin
El sistema es compatible con las redes 10BASE-T, 100BASE-TX y
1000BASE-T. No conecte una lnea de telfono estndar ni cables de otro
tipo que no sean compatibles con el sistema directamente al conector LAN,
ya que podra ocasionar sobrecalentamiento, un incendio o un fallo en el
funcionamiento del sistema.
Cable HDMI (se vende
por separado)
Cable HDMI
(se vende por separado) Indicador de acceso
Cable Ethernet LAN
disponible en el mercado
Televisor
Notas
Si el televisor no est equipado con un conector de entrada HDMI, utilice un Nota
tipo de cable de salida de vdeo adecuado para el televisor ( pgina 71) Puede conectarse a Internet sin usar un cable Ethernet. Para obtener ms
para conectarlo al sistema directamente. informacin, consulte "Utilizacin de una conexin inalmbrica"
Si se conecta un dispositivo al sistema PS3 mediante un cable HDMI, no ( pgina 89).
apague el dispositivo mientras el sistema est encendido (indicador de
encendido iluminado en verde intenso). No encienda ni apague el
dispositivo que est conectado al sistema con el cable HDMI, ya que esto
podra causar distorsiones de sonido o producir sonidos anormales.
74
Procedimientos iniciales
Configuracin del sistema PS3
Paso 4: conecte el cable de alimentacin AC Paso 5: configuracin inicial del software del sistema
Conecte el cable de alimentacin AC. Despus de encender el sistema, efecte la configuracin inicial. US
Precaucin
1 Encienda el televisor.
FR
No enchufe el cable de alimentacin AC del sistema en una toma de
corriente elctrica hasta haber realizado todas las conexiones. 2 Encienda el interruptor principal. ES
Para evitar posibles daos al sistema, al TV u otro dispositivo conectado,
el cable de alimentacin AC debe de estar enchufado a una toma de
corriente elctrica polarizada de tres puertos, con el cableado correcto y
Interruptor principal
con conexin a tierra. Como con todos los productos elctricos, la
conexin a componentes con fallas o defectos, o el uso de un enchufe
con un cableado no adecuado puede causar chispas y suponer un
peligro de incendio.
La toma de corriente debe estar instalada cerca de los aparatos y debe
ser fcilmente accesible.
Indicador de encendido
75
Procedimientos iniciales
Configuracin del sistema PS3
Conector USB
Cable USB
(suministrado)
Siga las instrucciones en pantalla para introducir la configuracin del
idioma del sistema, zona horaria, fecha y hora y nombre de usuario. Tras
completar la configuracin inicial, aparecer la pantalla para configurar la
conexin a Internet.
Conector USB Si sigue las instrucciones en pantalla, cuando realice la conexin
mediante un cable Ethernet, se seleccionarn automticamente los ajustes
bsicos. Cuando realice la conexin mediante una red LAN inalmbrica,
consulte "Configuracin de la conexin a Internet" ( pgina 90) y siga
los pasos que se indican a partir del nmero 4.
5 Pulse el botn PS del mando.
El sistema reconocer el mando. Una vez reconocido el mando, aparecer Una vez finalizada la configuracin, aparecer el men principal
la pantalla de configuracin inicial. ( pgina 67) en la pantalla del televisor.
Notas
Al utilizar un cable HDMI para conectar el sistema a un televisor, la pantalla para
cambiar la resolucin de salida de vdeo se mostrar durante la configuracin
inicial. Si selecciona "S" en la pantalla y, a continuacin, pulsa el botn , la
resolucin ptima de salida de vdeo se seleccionar automticamente.
Para obtener informacin acerca de cmo introducir texto, consulte
"Utilizacin del teclado en pantalla" ( pgina 96).
Los ajustes introducidos durante la configuracin inicial se pueden cambiar
en (Ajustes) o (Usuarios). Para obtener ms informacin, consulte la
76 gua del usuario ( pgina 93).
Procedimientos iniciales
Configuracin del sistema PS3
77
Procedimientos iniciales
Configuracin del sistema PS3
5 Seleccione las resoluciones compatibles con el televisor y, a 6 Confirme los ajustes, seleccione "S" y, a continuacin, pulse
continuacin, pulse el botn . el botn .
La resolucin mostrada en el televisor vara en funcin del conector de En funcin del conector seleccionado en el paso 2 y las resoluciones
entrada y del tipo de cable utilizado ( pgina 71). La resolucin ms seleccionadas en el paso 5, es posible que no aparezca esta pantalla.
alta ser seleccionada para la emisin de vdeo.
En funcin del conector seleccionado en el paso 2, es posible que no
aparezca esta pantalla.
78
Procedimientos iniciales
Configuracin del sistema PS3
Nota
Puede configurar los ajustes de salida de audio en (Ajustes) (Ajustes
de sonido) "Ajustes de salida de audio".
79
Operaciones bsicas
03 Encendido y apagado del sistema PS3
Utilizacin de un mando inalmbrico
Pulse el botn PS.
Apagado del sistema
Mantenga pulsado el botn PS durante un
Botn PS segundo o ms. Cuando se muestre el
mensaje "Apague el sistema" en la
pantalla, seleccinelo y, a continuacin,
pulse el botn .
Nota
Antes de utilizar un mando inalmbrico, primero
debe emparejarlo con el sistema
( pgina 81).
1 Pulse el botn de encendido. Estado del indicador de encendido Apagado del sistema
Verde intenso Sistema encendido
Pulse el botn de encedido durante dos
Verde
intermitente
El sistema se est apagando segundos o ms.
Sistema apagado (en modo de
Rojo intenso espera) Aviso
Botn de encendido Apagado Interruptor principal apagado No utilice el interruptor principal MAIN POWER
situado en la parte posterior del sistema para
apagar un sistema que no se encuentre en
modo de espera (indicador de encendido
Indicador de encendido rojo), ya que, si lo hace, podran perderse los
datos o producirse daos en el sistema.
2 Pulse el botn PS del mando inalmbrico.
Se asigna un nmero de mando.
80
Operaciones bsicas
04 Utilizacin del mando inalmbrico
Preparacin para su utilizacin Paso 2: asigne un nmero de mando
Para utilizar un mando inalmbrico, primero debe registrar o Cada vez que encienda el sistema, deber asignar un nmero al US
"emparejar" el mando con el sistema PS3 y asignarle un nmero. mando.
FR
Paso 1: Empareje el sistema y el mando. Pulse el botn PS. Todos los indicadores de puerto
Cuando se utiliza por primera vez parpadean.
ES
Cuando se utiliza con un sistema PS3 diferente 1 2 3 4
m m
Cuando se haya asignado un nmero al
mando, los indicadores de puerto del
Paso 2: Asigne un nmero de mando. nmero asignado cambiarn a rojo intenso.
Cada vez que el sistema se enciende 1 2 3 4
Paso 1: empareje el sistema y el mando Es posible conectar hasta 7 mandos al mismo tiempo. El nmero del
mando es el que se encuentra en la parte superior de los
Cuando utilice el mando por primera vez o con un sistema PS3 indicadores del puerto. Para los nmeros del 5 al 7, aada los
diferente, primero deber emparejar los dispositivos. Si enciende el nmeros de los indicadores encendidos.
sistema y conecta el mando mediante un cable USB, el
emparejamiento finalizar.
Ejemplo: se ha asignado el
mando nmero 5. 1 2 3 4
1
Cable USB
(suministrado) Notas
Verifique que el sistema est
encendido (que el indicador de El emparejamiento y la asignacin de nmeros del mando se pueden realizar
encendido est iluminado en slo cuando el sistema est encendido (indicador de encendido iluminado
verde intenso). en verde intenso).
Cuando se utiliza un mando emparejado con otro sistema PS3, se elimina
el emparejamiento con el sistema original. Empareje el mando con el sistema
nuevamente si el mando se ha utilizado con otro sistema.
Si se apaga el mando o el sistema, los indicadores de puerto situados en el
mando se apagarn y se borrar el nmero asignado.
81
Operaciones bsicas
Utilizacin del mando inalmbrico
Notas
El cable USB se puede conectar o desconectar con el mando y el sistema
encendidos.
Si el mando no funciona, pulse el botn PS y, a continuacin, vuelva a
asignar el nmero del mando.
82
Operaciones bsicas
05 Reproduccin del contenido
Blu-ray Disc (BD)/DVD/Discos CD
US
Aparece un icono en el men principal y se inicia la reproduccin del
1 Inserte el disco. disco.
FR
ES
Expulsin de un disco
Avisos Detenga la reproduccin y, a
Los discos no compatibles con el sistema no podrn continuacin, pulse el botn extraer.
reproducirse. Para obtener ms informacin, consulte el
documento "Seguridad y soporte tcnico". Nota
Para reproducir software comercial de vdeo en BD, en Para obtener instrucciones sobre cmo salir
ciertos casos es necesario renovar la clave de de los juegos, consulte "Jugar a juegos"
encriptacin*. La clave puede renovarse al actualizar el ( pgina 85). Indicador
software del sistema ( pgina 94). extraer
* Clave AACS (Sistema de Control de Acceso
Avanzado) Botn extraer
83
Operaciones bsicas
Reproduccin del contenido
Aviso
Para obtener ms informacin acerca de copias de seguridad de archivos
guardados en el disco duro, consulte el documento de Seguridad y soporte
tcnico.
84
Juego
06 Jugar a juegos
Juegos compatibles con este sistema Salir de un juego
Mientras juega, pulse el botn PS del mando inalmbrico. A
US
continuacin, seleccione "Salir del juego" en la pantalla que aparece.
Software de formato PLAYSTATION3
Compatible con este sistema *
FR
Software de formato PlayStation
Jugar a juegos
Este modelo del sistema PLAYSTATION3 est diseado para
reproducir software de formato PLAYSTATION3 y tiene
Nota
compatibilidad retroactiva limitada. Este sistema no es compatible y
Utilice los mtodos siguientes al jugar a ttulos de software que especifiquen el
no reproducir software de formato PlayStation2. Es posible modo del mando y el conector a utilizar.
reproducir ciertos ttulos de software de formato PlayStation en este
Pulse el botn PS del mando inalmbrico, seleccione "Ajustes de mando"
sistema. Para ms informacin, visite www.us.playstation.com.
"Cambiar modo analgico" y, a continuacin, seleccione el modo adecuado.
En algunos juegos, el modo se cambia automticamente.
Iniciar un juego Pulse el botn PS del mando inalmbrico, seleccione "Ajustes de mando"
Al insertar el disco, el juego se inicia de forma automtica. "Vuelva a asignar el mando" y, a continuacin, asigne el nmero de mando
correspondiente.*
* No puede asignar el puerto de mando 2-D utilizando este sistema.
Ranuras
2 Seleccione (Nueva Memory Card interna) y, a
internas continuacin, pulse el botn .
Nota
Aunque cree una "Memory Card (PS2) interna" en el paso 3, no podr utilizarla
para jugar a software de formato PlayStation2.
86
Juego
Jugar a juegos
87
Red
07 Configuracin de los ajustes de red
Utilizacin de una conexin por cable Preparacin de los elementos necesarios
Las siguientes instrucciones explican cmo conectarse a Internet Se requieren los siguientes elementos para realizar la conexin por
mediante un cable Ethernet disponible en el mercado. cable a Internet.
Conexin a Internet de banda ancha a travs de un dispositivo
Ejemplo de la configuracin de una red por cable como un DSL o cable mdem (la conexin de dispositivos
mltiples puede requerir hardware adicional)
La configuracin de la red y el mtodo de conexin pueden variar en Cable Ethernet disponible en el mercado
funcin del equipo que utilice y del entorno de la red.
Nota
Dispositivo de puerta de Router Los usuarios son los responsables del pago de los servicios de Internet.
acceso a redes como, por No es necesario si el mdem DSL o de
ejemplo, un mdem DSL o cable u otro dispositivo de red dispone
de cable de la funcin de router incorporada Configuracin de la conexin a Internet
ETHER ETHER WAN LAN1 LAN2 LAN3 LAN4
Nota
Un router es un dispositivo que permite la conexin de varios dispositivos a
una lnea de Internet. Es necesario disponer de un router si desea conectar un
ordenador y un sistema PS3 a Internet al mismo tiempo utilizando solo una
conexin a Internet.
88
Red
Configuracin de los ajustes de red
ajustes.
Notas
SSID, clave WEP y clave WPA son tipos de informacin de seguridad
necesarios para la conexin a un punto de acceso.
Al conectarse a Internet de forma inalmbrica, pueden producirse
interferencias de seal en funcin de la condicin de uso de los dispositivos
de la red inalmbrica. Si se experimenta una velocidad de transferencia de
datos de Internet lenta, o si el mando inalmbrico no funciona
adecuadamente, utilice un cable Ethernet disponible en el mercado para
establecer una conexin a Internet.
En funcin del punto de acceso que utilice, es posible que deba utilizar la
direccin MAC de su sistema cuando se conecte a Internet. Podr encontrar
la direccin MAC para el sistema si va a (Ajustes) (Ajustes del
sistema) "Informacin del sistema".
Los usuarios son los responsables del pago de los servicios de Internet. Fciles Los ajustes bsicos se establecen automticamente.
Puede introducir informacin detallada sobre los ajustes.
Para obtener ms informacin sobre los ajustes, consulte
Personalizados las instrucciones suministradas por el proveedor de
Configuracin de la conexin a Internet servicios de Internet o con el dispositivo de red.
90
Red
Configuracin de los ajustes de red
ES
6 Seleccione el punto de acceso que desee utilizar y, a
continuacin, pulse el botn .
SSID es un cdigo o nombre que se asigna al punto de acceso. Si
desconoce el SSID que debe utilizar o ste no aparece, pngase en
contacto con la persona que configura o mantiene el punto de acceso.
91
Red
Configuracin de los ajustes de red
8 Seleccione los ajustes de seguridad segn sea necesario y, a 10 Compruebe los ajustes y, a continuacin, pulse el botn .
continuacin, pulse el botn . Para obtener informacin detallada sobre los ajustes de red, consulte la
Los ajustes de seguridad varan en funcin del punto de acceso que se gua del usuario ( pgina 93).
utilice. Para determinar los ajustes, pngase en contacto con la persona
que configura o mantiene el punto de acceso. Nota
En algunos entornos de red, es posible que durante este procedimiento
aparezcan pantallas para ajustar opciones como PPPoE, servidor proxy y
direccin IP. En tal caso, consulte las instrucciones suministradas por su
proveedor de servicios de Internet para ajustar los elementos solicitados.
92
Red
08 Conexin a Internet
Si los ajustes de la red ya estn completados, el sistema PS3 se
conectar automticamente a Internet cuando se encienda el
Visualizacin de la gua del usuario
sistema. La conexin permanecer activa siempre que el sistema Puede utilizar el navegador de Internet para ver la gua del usuario US
est encendido. del sistema PS3. Seleccione (Manuales de instrucciones online)
en (Red) en el men principal y, a continuacin, pulse el botn . FR
Utilizacin del navegador de Internet Gua del usuario del sistema PLAYSTATION3
ES
http://manuals.playstation.net/document/
1 Seleccione (Navegador de Internet) en (Red) en el
La gua tambin se puede ver mediante el navegador Web del ordenador.
men principal y, a continuacin, pulse el botn .
Se abre el navegador de Internet. Aparece un icono de ocupado mientras
se carga la pgina. Crear una cuenta PLAYSTATIONNetwork
Icono Ocupado Al crear una cuenta PLAYSTATIONNetwork, podr chatear en
(Amigos) o descargar juegos o vdeos desde
(PLAYSTATIONStore). Vaya a (PLAYSTATIONNetwork),
seleccione (Registrarse en PLAYSTATIONNetwork) y, a
continuacin, pulse el botn . Se mostrar la pantalla para crear
una cuenta.
Mueve el cursor
Inserta un espacio
96
Teclado
Utilizacin del teclado en pantalla
Introduccin de caracteres
El modo predictivo permite introducir las primera letras de una US
palabra para que aparezca una lista de palabras frecuentes que
comiencen con esas letras. A continuacin, mediante los botones FR
direccionales podr seleccionar la palabra deseada. Una vez
introducido el texto, seleccione la tecla "Aceptar" para salir del ES
teclado.
Notas
Los idiomas que puede utilizar para la introduccin de texto son los idiomas
compatibles con el sistema. Puede configurar el idioma del sistema en
(Ajustes) (Ajustes del sistema) "Idioma del sistema".
Ejemplo: si "Idioma del sistema" est configurado en "Franais", podr
introducir texto en francs.
Los emoticonos solamente se pueden introducir al crear un mensaje en
(Amigos).
Nota
No es posible utilizar el modo intuitivo con un teclado externo.
97
" ", "PlayStation" and "PLAYSTATION" are registered trademarks of Sony Computer Entertainment Inc. Also, "PS3", "SIXAXIS" and " " are trademarks of the same company.
"XMB" and "xross media bar" are trademarks of Sony Corporation and Sony Computer Entertainment Inc.
"SONY" and " " are registered trademarks of Sony Corporation. Also, "ATRAC" is a registered trademark or trademark of the same company.
"Blu-ray Disc" is a trademark.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC.
All other trademarks are the property of their respective owners.
" ", "PlayStation" et "PLAYSTATION" sont des marques dposes de Sony Computer Entertainment Inc. "PS3", "SIXAXIS" et " " sont galement des marques commerciales de la mme socit.
"XMB" et "xross media bar" sont des marques commerciales de Sony Corporation et Sony Computer Entertainment Inc.
"SONY" et " " sont des marques dposes de Sony Corporation. "ATRAC" est galement une marque dpose ou une marque commerciale de la mme socit.
"Blu-ray" est une marque commerciale.
HDMI, le logo HDMI et High-Definition Multimedia Interface sont des marques commerciales ou des marques dposes de HDMI Licensing, LLC.
Toutes les autres marques commerciales sont la proprit des dtenteurs respectifs.
" ", "PlayStation" y "PLAYSTATION" son marcas comerciales registradas de Sony Computer Entertainment Inc. Asimismo, "PS3", "SIXAXIS" y " " son marcas comerciales de dicha compaa.
"XMB" y "xross media bar" son marcas comerciales de Sony Corporation y de Sony Computer Entertainment Inc.
"SONY" y " " son marcas comerciales registradas de Sony Corporation. "ATRAC" es una marca comercial registrada o una marca comercial de dicha compaa.
"Blu-ray Disc" es una marca comercial.
HDMI, el logotipo de HDMI y High-Definition Multimedia Interface son marcas comerciales o marcas comerciales registradas de HDMI Licensing, LLC.
Todas las dems marcas comerciales pertenecen a sus respectivos propietarios.
Information about system functionality and images published in this document may vary from those for your PS3 system, depending on the system software version in use.
Les informations relatives aux fonctionnalits du systme et les images publies dans le prsent document peuvent tre diffrentes de celles de votre systme PS3, selon la version du
logiciel du systme utilise.
La informacin sobre la funcionalidad del sistema y las imgenes publicadas en este documento pueden variar de lo que aparece en su sistema PS3, en funcin de la versin de software
que utilice.
www.us.playstation.com
2007 Sony Computer Entertainment Inc. All rights reserved. / Tous droits rservs. Printed in China / Imprim en Chine