Professional Documents
Culture Documents
I. INPUT
Wall geometry
Hr : Height of the support point from the top of the wall for a simply supported or
propped cantilevered wall (m).
xf : Position of the shear key, measured from the front of the base (m).
xL : Position of the line load, measured from the front edge of the wall (m).
xP : Position of the point load, measured from the front edge of the wall (m).
: Angle of friction between wall and soil (). Must be zero if Rankine theory is
specified.
: Poissons ration for the soil. The plane strain value should be used rather than
the triaxial value see geometry and loads input.
Applied loads