Professional Documents
Culture Documents
MAIN FEATURES
1. Small Diameter of Tube: Diameter only 1.6cm.
2. Multipurpose, used in cabinet, show case, kitchen, emergency light, decoration and so
on.
3. Long lifetime: Average life time is 10,000 hours.
4. Use Tri-Band Phosphor to increase Lumen and CRI.
5. Good quality: Our lamps are made for the markets of Europe and America. We use
raw materials of Japan or Philips to manufacture good quality lamps with long lifetime,
highluminous efficacy, rich color rendering and low lumen depreciation.
SPECIFICATIONS:
Item Nomin Diameter Length Lamp Lamp Average Lumen (Lm)
al Watt (mm) Voltage Current Life
(W) Typ Dia. (V) (A) (Hours) Day Cool Warm White
e (mm Light White
)
F4T5 4 T-5 16 136 29±3 0.170 10,000 120 130 140
F6T5 6 T-5 16 212 42±3 0.160 10,000 230 260 265
F8T5 8 T-5 16 289 56±4 0.145 10,000 340 380 390
F13T
13 T-5 16 517 90±5 0.170 10,000 740 835 855
5
F14T
14 T-5 16 549 84±5 0.170 10,000 1260 1350 1350
5
F21T
21 T-5 16 849 123 0.170 10,000 1800 1800 1950
5
F28T
28 T-5 16 1149 167 0.170 10,000 2500 2500 2700
5
F35T
35 T-5 16 1449 207 0.170 10,000 3250 3250 3450
5
Although the low wattage T5 fluorescent lamps had been developed for a long time, the
high wattage T5 fluorescent lamps had not been developed for the purpose of general
lighting until Philips initially demonstrated their high wattage T5 fluorescent lamps in
1995. Afterward, Osram successfully developed the T5 serious fluorescent lamps too, and
then, GE and Japanese lighting companies joined the T5 fluorescent lamps industry. The
T5 fluorescent since became the mainstream lighting of 21 century.
Owing to the small size, high lumen efficiency, good color rendering, low lumen
depreciation, long lifetime, no frequency blinking, energy saving, cost reduction, less
mercury employed, rapid start under low temperature and low voltage, the T5 fluorescent
lamps have been risen to the newest high technology green illumination of 21 century
The phosphor is very important to the T5 fluorescent lamps. The good phosphor makes
the high lumen of the lamp, and the tri-band phosphor can generate more light than the
halo phosphor. The lumen efficiency means that the volume of light generated by a watt
electricity power. For example, a 14W tube generates 1,325 Lm light, its lumen efficiency
is 1,325 Lm ÷ 14W = 94.64 Lm/W. Our 14W of T5 fluorescent lamp employs the Japanese
tri-phosphor and is made in Taiwan, its lumen efficiency is very excellent and about 2
times of the traditional 20W of T9 or T8 fluorescent lamp. On the other hand, because the
cost of the tri-phosphor is very expensive, which is about 18 times of the halo phosphor,
some manufacturers adulterate the halo phosphor to tri-phosphor or apply the inferior
phosphor in order to reduce the cost. The impure or inferior phosphor will cause the lower
light efficiency, lower color rendering, higher lumen depreciation and shorter lifetime. Our
high wattage T5 fluorescent lamps apply 100% pure Japanese high quality tri-band
phosphor, its quality is very excellent. We have compared our 14W of T5 fluorescent lamp
with other lighting sources, a table of the comparison is as follows:
CASE: A twelve-floor building with measurement total 20,000 m2. Be installed with an
Embedded Grid Fixture (so called T-Bar fixture) of F20T9 per 5 m2. In case the lighting
time is 10 hours one day and 300 days one year. The yearly consumption of electricity is
580,110 degrees by applying the F14T5 T-Bar fixture, and 1,200,000 degrees by applying
the F20T9 T-Bar fixture. Suppose the cost of electricity is USD0.10 / degree, expense of
electricity can be saved for USD61,989.00 a year by applying the T14T5 T-Bar fixture.
F20T9 F14T5
DESCRIPTION
TYPE OF TUBE T9 T5
NOMINAL WATTAGE OF TUBE 20 W 14 W
NUMBER OF TUBE PER FIXTURE 4 PCS 4 PCS
TYPE OF BALLAST TRADITIONAL ELECTRONIC
FREQUENCY OF POWER 60 HZ 50,000 HZ
FLICKER NO FLICKER
LUMEN OF TUBE 1,050 LM 1,325 LM
TOTAL LUMEN OF 4 TUBES (ITEM 1) 4,200 LM 5,300 LM
INPUT WATTAGE OF AN UNIT OF FIXTURE (ITEM 2) 100 W 61 W
LIGHT EFFICIENCY (ITEM 1÷ITEM 2) 42 LM / W 87 LM / W
MEASUREMENT OF BUILDING (ITEM 3) 20,000 M2 20,000 M2
LIGHTING MEASUREMENT PER FIXTURE (ITEM 4) 5 M2 6.31 M2
NUMBER OF FIXTURE TO BE INSTALLED (ITEM 3÷ ITEM 4,000 UNITS 3,170 UNITS
4) (ITEM 5)
CONSUMPTION OF ELECTRICITY (ITEM 2 X ITEM 5) 400,000 W 193,370 W
(ITEM 6)
1 DEGREE=1000W / HOUR 1,000 W 1,000 W
AVERAGE DAILY LIGHTING TIME (ITEM 7) 10 HOURS 10 HOURS
AVERAGE DAILY CONSUMPTION DEGREES (ITEM 4,000 DEGREES 1,933.7
6÷1000W X ITEM 7) (ITEM 8) DEGREES
AVERAGE YEARLY LIGHTING DAYS (ITEM 9) 300 DAYS 300 DAYS
AVERAGE YEARLY CONSUMPTION DEGREES (ITEM 8 X 1,200,000 580,110
ITEM 9) (ITEM 10) DEGREES DEGREES
COST OF ELECTRICITY PER DEGREE (SUPPOSE) (ITEM USD0.10 USD0.10
11)
AVERAGE YEARLY COST OF ELECTRICITY (ITEM 11 X USD120,000.00 USD58,011.00
ITEM 10)
SAVING COST YEARLY USD61,989.00
SAVING COST MONTHLY USD5,165.75
Note: to save how much money depending on the cost of electricity.
ENERGY SAVING
The T5 fluorescent lamps can save the energy substantially. There are two methods to
analyze how the T5 fluorescent lamps save the energy:
1. Lumen Efficiency Method: this method has been analyzed as per the above-mentioned
case.
2. Power Factor (PF) Method: T5 tube usually adopts electronic ballast, its PF is about
97%-99%. T9 tube usually adopts traditional ballast, its PF normally is about 35% -
65%. The T5 tubes plus electronic ballast can save power about 30% to 60%.
NO FLICKER
Our T5 high wattage fluorescent lamps can be equipped with the electronic ballast. As the
electronic ballast is the high frequency unit (30,000 Hz to 50,000 Hz), the tube will have
no flicker when lighting up. As for the traditional T8 or T9 fluorescent lamps, owing to
equip the traditional magnetic ballast, its working frequency is only 50 Hz or 60 Hz, which
will cause flicker of lamp. A flickering lamp will influence man’s mood, attention and
vision. A no-flicker fluorescent lamp will provide man a quiet, comfortable and healthy
lighting environment.