Professional Documents
Culture Documents
Before the power is turned on, switches S1, S2, S5, S6, S7 and jumper JP1 on the
gyro interface circuit (PC4201) shall be set in accordance with the type of the
compass being used according to the procedures described below. Those have
been set at the gyration ratio of 180X and are compatible with the step type before
delivery from factory. Be sure to check the type of the gyro compass used in own
ship and make settings according to the procedures below.
SERIAL SIGNAL
INDICATOR LED
LED
KEEP DEFAULT
OPEN
LOG PULSE
INDICATOR LED
LED
LOW-VOLTAGE GYRO
SETTING
4 2