DescRiPTion
“The stirrer motor (12) has a wintertight inline plug bresk connector (2 to allow easy
removal of the top plate when any maintenance is carried ost on the inside of the
reactor
‘A 100mt beaker is supplied to collect sample solutions in.
Numerical references el ate to dlageam on page 7.
The equipment is constructed on a steel frame (1) supported by four adjustable feet
(2) for bench mounting. The frame contains an extra cross member (3) a the base to
allow the use ofa forklift rac, this also contains the sump tay when fn use
Tre girs eactor vessel (4) is fitted with stainless steel plate, the lower plate (5)
‘The exit up ey (2) fo eco effvent, manufactured in PVC 0 Bld
possble wantmentbeloe being dacharged to dey has « ‘pon dines
PEEFEREREQR ELEC EERE EHISTALLATION REQUIREMENTS
‘The equipment Jenga for bench mnting om im evel ace
verll inesions are
HEGHT + 105m
wort im
Dam > Oaem
“The equipment equesconncion to single pis ised eecal suppy. A mabe
Ienptl ele spp wath be eqlpmen
‘The cooing water int supply nate shouldbe permanendy connect abaery
‘erupt fw af which le conte by fhe alee poh sles
‘The cool Vn dan shuld be kn othe aboretoy del
Insalntcn may be cried ot with a bs elt and possibly «smal quant of
ERE. ape. teal the sean thermometer sheath
‘fork ito ist having «02m and 20g capac Wl be enable for morng
fhe equpment othe ceed lost.
N clothing should be avaible when Ding
REI ent experimen soe hh gps
SERRE MRR RRR ERR BEST
and inlet feed connectors are firmly fixed in place when the lid is attached to the
vessel
Clamp the sump tray in the compartment 2 the base ofthe bench.
‘Screw the thermometer ino its housing and position on rector vessel, taking GREAT
CARE, seal with PTFE, tape if required.
‘Postion transformer ito the back ofthe bench using the four screws provided.
Place the 190ml beaker fn hole provided a sample outlet.