Professional Documents
Culture Documents
General specifications 3
YC-747UD
Electrical specifications 4
Names of parts 5
PC
Operation 6
Battery replacement 16
Caution 17
Introduction Features
Thank you for purchasing the temperature gauge 1.The maximum displays for four temp. values.
from us. Please take a few minutes to browse 2. Resolution 0.1/0.1 ,1/1.
through this user manual before you begin to 3.Swift response.
operate the unit to ensure that you are fully fami- 4.Setting alert temperature range.
liarized with how best to operate the temperature 5.With auto power off function.
as accurately and safely as possible. 6.With low battery indicator function.
The TM-7XX serial temperature gauges features a 7.With a perpetual calendar function.
microprocessor-ratsd digital temperature gauge, 8.With "COUNT"function.
which according to varied input configurations 9.With T1~T4 exchange to main display function.
and different thermocouple types, is divided into (for above dual channel modes)
48 modes, refer to the table below for a 10.With T1-T2 function.(for dual channel modes),
concise summary of subtle distinctions in their T3-T4 function(for four channel).
designed functions. 11.Additional features include: HOLD, / /K,
REL,CHAN,MAX/MIN/AVG,1 ,TYPE,TIME
(CLOCK setting), LIMIT(Hi/Lo setting).
12.CE certified, according to ITS-90 law.
1 2
General Specifications Electrical Specifications
1.Display Mode: Four-digit liquid crystal display. 1.Temp.unit: Celsius temp.( ). Fahrenheit temp.
2.Polarity indicator: No indicator is shown when ().Absolute temp.( K ).
readouts are in the positive value, while the 2.Measurement Range:( At 23 5 , 80%RH)
symbol"-" is prompted when readouts fall into K-type:-100~1300(-148~2372)
the negative value. J-type:-100~1000(-148~1832)
3.Overload indicator: The "OL"or"-OL"indicator. T-type:-100~400(-148~752)
4.Low-battery indicator: The symbol" B "is prom- E-type:-50~800(-58~1472)
pted on the LCD when the battery runs low.
R&S-type:0~1700(32~ 3092)
5.Power source: Four DC-1.5V/UM-4 batteries.
N-type:-100~1300(-148~2372)
6.Auto power off: The unit no operations are over
20-minute,the battery power will be turned off. 3. Accuracy: The basic accuracy does not include
Press the "Shift" key for 3 seconds, the auto po- the error of the thermocouple.
K/J/T/E/-type:
wer off will be cancelled.
(0.1% reading+0.7)-100~-1300
7.Sample rate:1time/sec. (0.1% reading+1.4)-148~2372
8.Battery life: Approx. 550 hours. R/S-type:
9.Operating Temperature and Humidity: (0.1% reading+2) 0~1700
0 ~50(32~122),0~80%RH. (0.1% reading+4) 32~3092
10.Storage Temperature and Humidity: N-type:
-20~60 (-4~140),0~80%RH. (0.1% reading+1.5)-100~1300
11.Dimension:164x76x32mm(LxWxH). (0.1% reading+3 )-148~2372
12.Weight: Approx. 415g(include batteries). 4.Resolution:
13.Accessories: 1 0.1
(A) DC-1.5V/UM-4(4pcs). K -100~1300 -100~200
J -100~1000 -100~150
(B) Housing(1pcs).
T -100~400 -100~150
(C) K-type thermocouple wire.
E -50~800 -50~100
(single channel x1pcs,
R 0~1700
for above dual channel x2pcs).
S 0~1700
(D) Users manual(1pcs). N -100 ~1300 -100~150
3 4
Names Of Parts Operation
1. :Power ON/OFF key.
Press the power button to turn the power
3
ON or OFF.
25 25
MAX
AVG MIN
5 6
Operation Operation
5.REL:The minus relative readout function key. 7.CHAN:every input temp. value changed to main
Press the "REL" key, a "REL" icon will display function key.(for above dual
display on the LCD and the original of a channel modes)
temp. will become to 0, and save the
original temp. to make a standard value. A.dual channel
step1 step2
Whenever the input temp. shifts, the LCD T1
TYPE:K press
T2
TYPE:K press
will shows the minus value of original 25 CHAN 30 CHAN
temp. value and input temp. Value. T2
30 T1
25
step1 T1 become main display
T1 T1 REL
TYPE:K press TYPE:K
original
25 REL 25 temp. B.triple channel
step2
0.0 Save25 step1
T1
TYPE:K
T3
50 press
T2
TYPE:K
T3
30 press
25 CHAN 30 CHAN
step2
T2
30 T1
25
press T1 REL step3
TYPE:K input press T3 T1
25
REL 30 temp. CHAN
TYPE:K
50
5.0 30-25=5 T2
30
6.1 :1 or 0.1 unit selection function key. C.four channel
step1 step2
Press the "1 "key, the whole resolution will T1
TYPE:K
T3
50 press
T2
TYPE:K
T3
50 press
become 1 / 1 ,and no dot. Press the key 25 CHAN 30 CHAN
once more, the display will restore common T2
30 T4
40 T1
25 T4
40
state(the resolution will become 0.1/ 0.1).
step4 step3
P.S:The resolution of the thermocouple types press T4
TYPE:K
T3
50 press T3
TYPE:K
T1
25
is shown in page 4. CHAN 40 CHAN 50
T2
30 T1
25 T2
30 T4
40
7 8
Operation Operation
8.TYPE:select thermocouple type function key. 9.COUNT: The count time setting function key.
TM-7XX series according to different The max count time is 99 hours and
modes, there are seven types in all. Other 59 minutes.
modes can selected by users besides TM-
step1
71XX,TM-72XX,YC-73XX, TM-74XX. T1
TYPE:K
T3
50 press T1
TYPE:K
T3
50
The method of operation as follows: over 1 hour
25
T2
2540 up key T2
30 T4
30 00:00m:s
T1
TYPE:K
T3
50 press TYPE:KJ
TERSN
25 T1 T3
50
40 left key
TYPE:K
T2
30 T4
25
T1 T3
50 T2
2540 right key T2
12:00
The type became to TYPE:J
30 T4
30 T4 40
"J" type. 25 step2
T2
30 T4
40 press
down
key
12:00
Press right key back to y
0101 2001
main display.
9 10
Operation Operation
11.T1-T2: for above dual channel modes. 13.LIMIT:To enforce alarm function key.
step1
press step1
step2
T1 T3
50 SHIFT T1 T3
50 press press
TYPE:K TYPE:K step2
T3
50 T3
50
2540 2540
SHIFT T1 T1
CHAN TYPE:K SHIFT TYPE:K
press
2540 2540
SHIFT
T2 SHIFT T2 1
30 T4 30 T4
T2 SHIFT T2
30 T4 30 T4
step3
T1 T3
50 press T1 T3
50
TYPE:K TYPE:K
LIMIT T3 step3 LIMIT T3
25
25
SHIFT
CHAN SHIFT
T1
TYPE:K 50 press T1
TYPE:K 50
25
2540
T2 T2 SHIFT
T1-T2
step4 30 T1-T2
-5 30 -5 1 SHIFT
T2 T2
press step4 T4
30 T4 30 40
press
12.T3-T4: for four channel modes.
step1 P.S1:When the main display temp.value is higher
press than the alarm setting Hi temp.value or
step2 lower than the alarm Lo setting temp.value,
T1
TYPE:K
T3
50 SHIFT T1
TYPE:K
T3
50 press
the alarm will continue send out.
2540 2540
SHIFT
HOLD
2:The Hi/Lo setting temp. Value of the
T2 SHIFT T2
30 T4 30 T4 thermocouple types are different.
Type Hi/Lo Hi Lo
K 1300 -99.9
step3
T1
TYPE:K
T3
50 press T1
TYPE:K
T3
50 J 1000 -99.9
T 400 -99.9
25
2540
SHIFT
HOLD SHIFT E 800 -50
T3-T4 T3-T4
step4 10 T4 10 T4
40 R 1700 0
press S 1700 0
N 1300 -99.9
11 12
Operation Operation
14.Hi/Lo:The alarm Hi/Lo temp.value setting. 15.CLOCK:To enforce date setting function key.
step1
press
step1
press T1
TYPE:K
T3
50 SHIFT T1
TYPE:K
T3
50 step2
press
step2
T3
50 T3
50
2540 2540
T1 T1 SHIFT
TYPE:K SHIFT TYPE:K
press K F
2540 2540
SHIFT MAX MIN T2 T2
SHIFT
AVG 30 T4 30 T4
T2 SHIFT T2
30 T4 30 T4
A.Use , key to move place.
B.Use , key to set hour &
A.Use , key to move place. LIMIT minute. 12:01
Hi C.The flicker word is the adjustable 3003 2004y
B.Use , key to set Hi temp.
value. 1300 word.
step3
C.The flicker word is the adjustable press SHIFT
word.
step3 A.Use , key to move place.
press SHIFT B.Use , key to set date &
month. y
12:01
A.Use , key to move place. LIMIT
Lo C.The flicker word is the adjustable 3003 2004
B.Use , key to set Lo temp. word.
value. -99.9 step4
press SHIFT
C.The flicker word is the adjustable
word. A.Use , key to move place.
step4
press SHIFT
B.Use , key to set year.
C.The flicker word is the adjustable y
12:01
word. 3003 2004
Back to main display.
step5
press SHIFT
Back to main display.
13 14
Operation Battery replacement
16.perpetual calendar: 1.The symbol " B " that appears in the upper left
of the LCD display indicates that the unit's
step1
power on T1
TYPE:K
T3
50 Step2 battery is running low. Please replace the 1.5V
T2
2540 + battery at once to ensure the test accuracy.
2.Remove the battery cover by one screwdriver.
30 T4 1.Press right key
and hold on. 3.Replace the old battery with four new 1.5V
2.Press power key. batteries and lock the battery cover.
3.Set free two keys.
4.Prior to replacing the battery, please make
certain to remove the thermocouple from the
temperature gauge as a safety precaution.
12:50 y
5.When in extended idle, please remove the 1.5V
0503 2004 battery from the temperature gauge and store
the temperature gauge only in a cool and low-
17. :backlight.(for option) humidity setting.
6.To avoid combustion, DO NOT dispose of
A.Press the backlight button to turn the
backlight ON or OFF. batteries in general into an open flame.
B.In no turn off backlight condition, the 7.Caution the positive and negative polarity when
backlight function can keep on 1 minute. loading battery.
8.Please abide by pertinent laws and regulations
when disposing of used batteries.
15 16
Caution
1.Input protection: The temperature jack carried
a maximum voltage of 24 volts DC or AC .
2.Temperature jacks: Design for the insertion of a
standard small thermocouple jacks, which has a TM-7XX series thermometer
center spacing of 7.9mm between the two K/J/T/E/R/S/N Types
prongs. Data Logger
3.Please DO NOT placed inside a microwave for
temperature testing. Users Manual
4.A correct thermocouple slot should be chosen
when operating the temperature gauge.
5.Please DO NOT attempt to use a temperature
gauge that is not working properly, for this may
result in physical harms, send for repair service
C YC-747UD
at once.
6.Please DO NOT attempt to operate the
temperature gauge in the around sites where
explosive gases, vapor or dust particles are
present.
7.Please refrain from subject the paired
PC
thermocouple or the grounding between the
thermocouples to a voltage exceeding what has
been marked on the unit.
8.When gauge occur crashed , please take one
battery out for above one minute. Then place
the battery back and restart the gauge.
17
Operation Operation
1.PC:Turn on"PC"function,the meter &PC 3.CALL:Can inquire that the data of every
application program communication. When channel, can also inquire about the surplus
turn on "PC" function ,The auto power off space of the memory. For Data Logger models.
will be canceled, and the power off will be Each time entering to inquire data by the last.
canceled, too. When turn on "CALL" function, the auto
power off will be canceled.
step1 step2
A
press last number
T1
press T1 PC
TYPE:K TYPE:K
step1 T1
25 PC 25 PC T1
A
TYPE:K
T3
50 press
TYPE:K
CALL 1000
1293 y
SHIFT
4. SHIFT + CALL :remove the record of the memory. setting. The biggest settlement time is 59
For Data Logger models. minutes and 59 seconds. Minimum to set for
time is one second. Enter and show 00:01
seconds of initial value for the first time.
step1 Enter and show settlement value last time
press after.For Data Logger models.
step2
T1
A
TYPE:K
T3
50 SHIFT
T1
A
TYPE:K
T3
50 press
back to main display
2540 2540
SHIFT
CALL
T2
30 T4 SHIFT
T2
30 T4
T1
A
TYPE:K
T3
50 REC
2540
INTV
flickerin g
T2
Step3 30 T4
press CALL 00:02 m:s
finish remove
CLEA CALL
CLEA SHIFT SHIFT
step1
press
express it in movements by flickering step2
SHIFT
T1
A
TYPE:K
T3
50 press REC
INTV
2540
SHIFT
back to main display REC SHIFT
T2
30 T4 00:01 m:s
5. SHIFT + PC :Carry out the PC interval
setting. The biggest settlement
time is 59 minutes and 59 seconds
REC
.Minimum to set for time is one INTV
3 4
Operation
7. SHIFT + PC :
T1
A
TYPE:K
T3
50
PC INTV
T2
2540
30 T4
00:02 m:s
SHIFT SHIFT
step1
press
step2
T1
A
TYPE:K
T3
50 press PC INTV
2540
SHIFT PC SHIFT
T2
30 T4 00:01 m:s
PC INTV
00: 0 1 m:s