You are on page 1of 5

The Cement Slurry Scheme

19" Intermediate Casing Cementing


The setting depth of 244.5mm intermediate casing is about 2400m, using dual density
cement slurry. Lead slurry density is 1.60 g/cm3, cementing interval is about 01200m; tail slurry
density is 1.90g/cm3, cementing interval is about 1200 2400m. There exists gypsum zone
between 20822400m. BHST is about 87, BHCT is about 65.
(1) Performance Requirements of Cement Slurry
Salt-resisting Cement Slurry; API Fluid Loss cannot be more than 100ml; Thickening Time
should be between 120150min; Transition Time should be less than 20min; Without Free Fluid;
Compressive Strength should be more than 14MPa(24h).
(2) Recommended Cement Slurry Formulation
1) Lead Slurry
G-Grade Oil-Well Cement 600g + 17% weight-lower & strength-enhance Additive (DRL-1) +
3%Fluid Loss Additive (DRF-100S) + 1%Dispersant (DRS-1) + 0.23%Retarder (DRH-100L) +
0.2%Defoamer (DRX-1) + Water 325g
2) Tail Slurry
G-Grade Oil-Well Cement 800g + 5% Stabilizer (WDJ) + 3% Fluid Loss Additive (DRF-100S)
+ 1% Dispersant (DRS-1) + 0.225% Retarder (DRH-100L) + 0.2% Defoamer (DRX-1) + Water
350g
(3) Volume of Cement Slurry
1Design Condition
a The setting depth of 13" surface casing is about 360.0m, 9" intermediate casing is
about 2400m;
bWellbore enlargement rate is 10%, 30% additional;
c20% additional to the volume of cement slurry for the 13" surface casing.

2Volume of Cement Slurry


Cementing Annular Wellbore With
Density Volume Dry Cement
Content Interval Length Enlargement additional
g/cm3 m3 t
m m Rate, % m3
Lead 0-360 360 0 11.7 14.0
1.60 63.3
Slurry 360-1200 840 10 37.9 49.3
Tail
1.90 1200-2400 1200 10 54.1 70.3 92.5
Slurry
Total 133.6 155.8
2. 5" (or 7") Production Casing Cementing
The setting depth of 5" (or 7") production casing is about 3100m, using two-stage cementing
method, and the depth of stage cementer is about 2300m. The density of lead slurry of first stage is
1.78 g/cm3, cementing interval is about 2300 2400m, the density of tail slurry is1.90 g/cm3,
cementing interval is about 24003100m; The density of second stage cement slurry is 1.90 g/cm3,
cementing interval is 02300m. BHST is about 113, BHCT is about 84.

1
(1) Performance Requirements of Cement Slurry
1Lead Slurry of First Stage Cement Slurry
API Fluid Loss shall be not more than 50ml; Thickening Time shall be between 200240min;
Transition Time shall be less than 15min; Without Free Fluid; Compressive Strength shall be more
than 14MPa(24h).

2Tail Slurry of First Stage Cement Slurry & Second Stage Cement Slurry
API Fluid Loss shall be not more than 50ml; Thickening Time shall be between 120150min;
Transition Time shall be less than 15min; Without Free Fluid; Compressive Strength shall be more
than 14MPa(24h).
(2) Recommended Cement Slurry Formulation
1) Lead Slurry of First Stage Cement Slurry
G-Grade Oil-Well Cement + 3% Fluid Loss Additive (DRF-300S) + 1% Dispersant (DRS-1) +
0.23% Retarder (DRH-100L) + 0.2% Defoamer (DRX-1) + WaterWATER/CEMENT=0.55
2) Tail Slurry of First Stage Cement Slurry
G-Grade Oil-Well Cement + 3% Fluid Loss Additive (DRF-300S) + 1% Dispersant (DRS-1) +
0.23% Retarder (DRH-100L) + 0.2% Defoamer (DRX-1) + WaterWATER/CEMENT=0.44
3) Second Stage Cement Slurry
G-Grade Oil-Well Cement + 3% Fluid Loss Additive (DRF-300S) + 1% Dispersant (DRS-1)
+ 0.2% Retarder (DRH-100L) + 0.2% Defoamer (DRX-1) + WaterWATER/CEMENT=0.44
(3) Volume of Cement Slurry
1Design Condition
a The setting depth of 5" (or 7") production Casing is 3100m, 9" intermediate casing is
2400m.
b Wellbore Enlargement Rate is 10%, 30% additional; 20% additional to the volume of
cement slurry in 9" intermediate casing.

2Volume of Cement Slurry


aVolume of First Stage Cement Slurry
Cementing Annular Wellbore
Density Volume 30% Dry Cement
Content Interval Length Enlargement
g/cm3 m3 additional t
m m Rate, %
Lead
1.80 2300-2400 100 -- 2.285 3.0 3.5
Slurry
Tail Slurry 1.90 2400-3100 700 10 20.3 26.4 34.7
Total 29.4 35.01
bVolume of Second Stage Cement Slurry
Cementing Annular
Density Volume 20% Dry Cement
Content Interval Length
g/cm3 m3 additional t
m m
Cement Slurry 1.90 0-2300 2300 52.6 63.1 83.1

2
APPENDIX
1Cement slurry for 9" intermediate casing cementing
(1) Lead slurry
Cement Slurry G-Grade Oil-Well Cement 600g+17% Light Weight Additive (DRL-1)+3%Fluid Loss Additive (DRF-
Formulation 100S)+1%Dispersant (DRS-1)+0.23%Retarder (DRH-100L)+0.2%Defoamer (DRX-1)+Water 325g
Transition API Fluid Compressive
Density Thickening Time Free Fluid
Time Loss Strength(24h)
Slurry Property g/cm3 min(7030MPa) %
min ml MPa
1.60 160 10 40 0 15.3
120 70 100

110
90

60
100

80

90

50
70

80

60
70
40
Temperature ()

Consistency (Bc)
Pressure (MPa)

60 50

Comments 50
30
40

40

30
20

30

20

20
10

10
10

0 0 0
0:00 0:30 1:00 1:30 2:00 2:30 3:00
Time (HH:MM)

(2) Tail Slurry


Cement Slurry G-Grade Oil-Well Cement 800g +5% Stabilizer (WDJ)+3% Fluid Loss Additive (DRF-100S)+1%
Formulation Dispersant (DRS-1)+0.225% Retarder (DRH-100L)+0.2% Defoamer (DRX-1)+Water 350g
Transition API Fluid Compressive
Density Thickening Time Free Fluid
Time Loss Strength(24h)
Slurry Property g/cm3 min(7030MPa) %
min ml MPa
1.90 150 11 36 0 25.2
120 100 100

110
90 90

100

80 80

90

70 70

80

60 60
70
Temperature ( )

Consistency (Bc)
Pressure (MPa)

60 50 50

Comments 50
40 40

40

30 30

30

20 20

20

10 10
10

0 0 0
0:00 0:30 1:00 1:30 2:00 2:30 3:00
Time (HH:MM)

3
2Cement slurry for 5(7)" production casing cementing
(1) First Stage Cement Slurry
1Lead Slurry
Cement Slurry G-Grade Oil-Well Cement +3% Fluid Loss Additive (DRF-300S)+1% Dispersant (DRS-1)+0.23%
Formulation Retarder (DRH-100L)+0.2% Defoamer (DRX-1)+WaterWATER/CEMENT=0.55
Transition Compressive
Density Thickening Time API Fluid Loss Free Fluid
Time Strength(24h)
Slurry Property g/cm3 min(8040MPa) ml %
min MPa
1.78 227 11 46 0 18.9
150 100 100

140

90 90

130

120 80 80

110

70 70

100

90 60 60
Temperature ( )

Consistency (Bc)
Pressure (MPa)

80

50 50

Comments
70

60 40 40

50

30 30

40

30 20 20

20

10 10

10

0 0 0
0:00 0:30 1:00 1:30 2:00 2:30 3:00 3:30 4:00
Time (HH:MM)

2Tail Slurry
Cement Slurry G-Grade Oil-Well Cement +3% Fluid Loss Additive (DRF-300S)+1% Dispersant (DRS-1)+0.23%
Formulation Retarder (DRH-100L)+0.2% Defoamer (DRX-1)+WaterWATER/CEMENT=0.44
Transition API Fluid Compressive
Density Thickening Time Free Fluid
Time Loss Strength(24h)
Slurry Property g/cm3 min(8040MPa) %
min ml MPa
1.90 120 14 30 0 27.7
150 100 100

140

90 90

130

120 80 80

110

70 70

100

90 60 60
Temperature ()

Consistency (Bc)
Pressure (MPa)

80

50 50

Comments
70

60 40 40

50

30 30

40

30 20 20

20

10 10

10

0 0 0
0:00 0:30 1:00 1:30 2:00 2:30 3:00
Time (HH:MM)

(2 ) Second Stage Cement Slurry


Cement Slurry G-Grade Oil-Well Cement +3% Fluid Loss Additive (DRF-300S)+1% Dispersant (DRS-1)+0.2%
Formulation Retarder (DRH-100L)+0.2% Defoamer (DRX-1)+WaterWATER/CEMENT=0.44

4
Transition API Fluid Free Compressive
Density Thickening Time
Time Loss Fluid Strength(24h)
Slurry Property g/cm3 min(6528MPa)
min ml % MPa
1.90 115 11 30 0 24.8
100 70 100

90 90

60

80 80

50
70 70

60 60
40

Temperature ()

Consistency (Bc)
Pressure (MPa)
50 50

Comments 40
30
40

30 30
20

20 20

10

10 10

0 0 0
0:00 0:30 1:00 1:30 2:00 2:30
Time (HH:MM)

You might also like