CARGO SYSTEM\Cargo System, Hydraulic Power Packs && Pipelines\Pipelines && Fittings
Page 1 of 1 Print Date: 07/11/2017
Job Name Check of system pipes and fittings
Job Type Check
CBM Job? This is not a CBM job.
Designer
Equipment Type
Default Interval 3 Month
Description *** ALL NECESSARY SAFETY PRECAUTIONS TO BE OBSERVED***
Manufacturer's Instruction/Maintenance Manual and any relevant Service Bulletins are to
be referred to prior to and during maintenance works.
Check all pipes for leakage or damage.
Check of all pipe securing arrangements. Loose clips should be tightened up and any missing clips should be replaced. Check valve packing for leaks. Clean filters, if provided. Check fittings for proper operation. Lubricate where it is relevant. Refer to vessel's Lubrication Chart for type/grade of grease. Rectify defects as necessary or record for future action.