You are on page 1of 21

ADVANCED LNG

TRAINING

(Liquefied Natural Gas)

Serdar KUM
Research Assistant, ITUMF, TURKEY
1
STAYING IN TIC
(Tokyo International Centre)

2
Training Schedule at NYK
Date Contents of Training
LNG Business Operation of LNGC (1) Operation of LNGC (2)
10 LNG Market, LNG Chain, Exist Project LNG fleet of Preparation for Service of Basic Cargo Operation
Operation
July the World & Prospects, etc. New building LNGC
2003
(LNG No 1 Team) (S. KONO) (S. EZAKI)
Ship management of
Operation of LNGC (3) Operation of LNGC (4) Ship management of
LNGC (1)
11 Preparation & Operation Steam Turbine Plant LNGC (2)
HSE, Safety & Quality
July for Dry Dock and BOG Control Technical Support
Management Safety
2003
Education
(T. SHIMIZU) (T. MIYAHARA) (LNGSHIPTECH)
(S. KONO)

Introduction 1.Hull Construction and Cargo Equipment II, III


1.Training Program for Cargo Containment 9Pumps
LNGC System 9Heater and Vaporizer
Properties and Hazards
14 2.Facilities of NYK 2.Cargo Equipment I 9Nitrogen
of LNG
July Maritime Training Center 9Piping System 9Inert Gas Generator
2003 3.an Ocean Pipeline that
thats 9Valves 9Dual Fueling System
(T. KOSHISAKA)
Safe and Reliable 1.Safety Precautions and
Measures (T. KOSHISAKA,
(Y. HORIGUCHI) (T. MATAGAWA) H. NOZAKI)

15 Cargo Operation Cargo Operation


July (Simulator Training for Qatar PJ) (Simulator Training for NWS)
2003 (T. MATAGAWA) (Y. HORIGUCHI)

3
NYK LNG Department

4
NYK TRAINING CENTER

Model Exhibition Room

LNG Carrier Scale Model (1/50)


5
Classroom (Capacity 30 people) Real Machinery for Training

Maintenance & Repair Training Room


6
LNG Carrier Simulator Rooms

Engine Control Console Trainees Station (NWS)

Local Valve Operation Panel QATAR PROJECT


7
ON BOARD TRAINING
S/S BANSHU MARU
GRT : 102,390 T
DWT : 67,055 T
LOA : 283.0 m
Breadth : 44.5 m
Depth : 25.0 m
Av. Speed : 18 knots
Japanese- Indonesian

8
On Board Training :
TRAINING SCHEDULE
( SENBOKU - BONTANG - HIMEJI )
DATE TIME SCHEDULE
June
June,, Departure Senboku (Voy.405-B) , 0900: CTM CHECK
17
(THU) 1000: PREPARATION FOR L/D Compressor.( G/E) 1230: L/D Compressor (G/E)
18 0800 - 1400 : Tank C/D (C/O)
(FRI) 1400 Orientation and Education & Familiarization for New Joiner (CCR)
19 0800 - 1200/ 1300-1700 : Study for Cargo Line , Spray and other Line
(SAT)

20 Holiday
(SUN) 1300 : Drill
June, 0800-1200 : G/0 check, Cargo Line Torque check (G/E)
21
(MON) 1300-1700 : Tank C/D
22 0800-1200 : G/0 check, Torque check (G/E)
(TUE) 1300-1700 : Tank C/D
23 0800-1200 : Tank C/D.
(WED) 1300-1700 : Tank C/D
24 0800-1200 : Lecture for H/D Compressor and L/D Compressor and Optical cables.
(THU) 1200 : Tank C/D
25 0800: Tank C/D
(FRI) 1300: Self study
9
26 1 hr 0800-
0800-1200 : Preparation H/D and entering port for Gas part.
(SAT) back 1300 : Tank C/D ,Study for Loading

27 0800: Preparation entering port for gas part.


(SUN) 1300 : Cargo meeting. Study for Check List

28 0500: Line Cool Down - S/B (CCR) - Cargo meeting - CTM - cargo work up to Full
(MON) Rate *2300:Slow Down - CCR -CTM(CCR) -

29 CCR Check
Check instruments with G/E - Start L/D Compressor with (G/E)
(TUE) * CARGO ANALYSIS input to CTM
30 1 hr
0800-
0800- 1700: Lecture for Temperature
Temperature Control during Laden Voyage.
(WED) Ahead

31 0800:-
0800:-1200 : Review for Cargo Piping Line.
(THU) 1300-
1300-1500 : Preparation and Study for IGG System (G/E)

1 0800-
0800-1200 : Hold Aeration (CCR)
(FRI) 1300 :Hold
:Hold inspection ( No.1 Hold )

2 0800-
0800-1130: Check Due Point & O2 contents in Hold.
(SAT) 1200-
1200-1700: Study for calculation for CTM .

0800: Preparation for entering port.


3
(SUN) 1300 Cargo meeting, Self study.

4
0800-
0800-1500: Line C/D-
C/D- CTM - CCR up to Full Rate.
(MON)

0100-
0100-1200: From Slow down to Finish cargo work (CCR): Manifold Drainage, Float
5
(TUE) Gauge Winding Up

10
TRAINING SCHEDULE
(HIMEJI - BONTANG - SENBOKU)
DATE TIME VOYAGE NO. 406 (6/6)
August,
August, Departure Himeji (Voy.406), 0900: CTM CHECK
5
(TUE
(TUE) PREPARATION FOR L/D Compressor.( G/E)
6 0800 - 1000 : Manifold and Strainer Cleaning, 1100 : Start L/D Compressor
(WED)
WED) 1230 1600 : Tank C/D (C/O), 1300 Education & Familiarization for New Joiner
7 0930 - 1500 : Tank C/D (C/O)
(THU)
THU) 1300: On Board Training, Drills
8 0930 - 1500 : Tank C/D (C/O), Lecture for Gas Free & Gassing Up Work
(FRI)
FRI) 1300 Set Countermeasure Against Pirates
1 hr
9 0800 : Preparation for Arrival with Deck Department, Tank C/D (C/O)
Retard
(SAT)
SAT) 1300 Masters Inspection, Tank C/D (C/O)
10 0800 : Preparation for Entering Port
(SUN)
SUN) 1145 BRM, 1300 Cargo Meeting, Preparation for Cargo Documents with 3/O.
11 0500 : Line Cooldown S/B (CCR) Cargo Meeting CTM Cargo work.
(MON)
MON) 2300 : Slow Down CCR CTM (CCR)
12 CCR Check Insurements with G/E - Start L/D Compressor
(TUE
(TUE)) Start Dual Burning in Engine Room * Cargo Analysis input to CTM

11
13 1 hr 1100 : Orientation and Education & Familiarization for New Joiner (CCR)
(WED)
WED) Ahead 1300 : Water Spray Test

14 0900 : Lift countermeasure against pirates.


(THU)
THU) 1300 : Inspection of No.3 (P/S) B.W.T

15 0800 : Hold Aeration.


(FRI)
FRI) 1300 : Inspection No.2 Hold, Check Dew Point and O2 contents
16
(SAT)
SAT) Make Report and Study

17 0800 : Preparation for Entering Port, 1145 BRM,


(SUN)
SUN) 1300 : Cargo Meeting, 1330 S.M.M
18
(MON)
MON) Arrival SAKAI (Senboku), Disembark

19
(TUE)
TUE) Departure SAKAI (Senboku)

12
BALAST VOYAGE TANK C/D
L/D
Compressor
Vapor Line BOG
Spray Nozzle
Heater
Spray Line

BOG BOG BOG BOG

LNG LNG LNG LNG

Spray Pump BOILER

13
LOADING:
H/D Compressor

Liquid Heater
Shore side
BOG Storage Tank

LNG LNG

Loading Pump
Cargo Tanks

LNGC SHORE

14
LADEN VOYAGE :
L/D
Compressor
BOG
Vapor Line
Heater

BOG BOG BOG BOG

LNG LNG LNG LNG

BOILER

15
DISCHARGING :

RGB
Liquid Heater
BOG
BOG Shore side
Storage Tank

LNG LNG

Cargo Tanks

LNGC SHORE

16
SOME PHOTOES :

17
18
19
20
21

You might also like