You are on page 1of 1

SCHEDULE OF FINISHES

Walls
Footings 230x600mm in medium strength concrete to NBR standard and SANS 10400.
Walls are built with 90mm bricks - heights as per plan. External walls to plastered and
painted with 50mm cavity between internal and external skins with 2.5 butterfly wire ties
per square meter. All internal walls plastered with lime cement.
Brickforce in 4 layers over all openings, with precast concrete lintels to openings greater
than one metre.
26.5
Window-sills
ROOF PITCH External & Internal, smooth finished cement plaster.

Roof Construction
300

1,594
300 Cement roof tiles @ 26.5 pitch on 38x38 SAP battens at maximum 320 centres on
PLASTER & prefabricated gangnail trusses at maximum 760 c/c, fixed to 114x38 wallplates and
PAINT anchored to brickwork with 30x2mmx1m hoop iron ties, built into walls for minimum of
DPC 600mm. SABS approved underlay to tiled roof. All roof timber to be minimum Grade 5 SA
NGL
Pine TAN treated. All gable ends to be tied with hoop iron built into wall for minimum

4,144
ELEVATION 1 600mm and up to two trusses away from gable to SANS 10400-L where applicable.
SCALE 1:100 Bracing as per A19 Engineer.

2,550
Eaves
300mm Open eaves overhang with 225mmx10mm painted fibre cement fascias.

BATHRM LOUNGE Rainwater Disposal


DPC DPC Alu. gutters with 75mm PVC downpipes as per plan.
400x200 250mic DPM
375mic DPM UNDER ALL WALLS
THICKENED Ceilings
MINIMUM 150mm ABOVE FGL
FOUNDATION 25mm Isoboard EPS ceiling on 38 x 38 SA Pine battens at 300mm spacing and 76mm
600x230 600x230
Rhino cornice with 155mm thick flexible polyester blanket(Isotherm).
SECTION A-A
SCALE 1:100 Floors
Finished as per plan and/or client choice/building tender, on 25mm screed, on 80mm
concrete for ground storey, (as above) on 250 micron waterproof sheeting, on compacted
filling and sand blinding. All floor levels to be a minimum of 150mm above FGL.

3 Doors & Windows


Windows top-hung aluminium, as per plan codes & elevations.
5,700 ELEVATION 2 Note : Safety glass to window panes larger than 1sq.m or closer than 500mm from FFL to
230 90 230 SANS 10137 and to comply to SANS 10400-N.
2,710 2,440 SCALE 1:100
230 90 90 230 Drainage
1,710 910 2,440 110mm Smooth uPVC Sewer pipe with minimum 1:60 fall with IL at minimum 450mm.
50mm 2way vent valve on start of one pipe sewer system. All sewer lines passing under
2 1,130 900 3,670 structure to comply to SANS 10400-PP24 (encase in sand or concrete). All drainage to
W6 comply to SANS 10400-P.
(900x1100)
Electricals - as per building tender.

230
230
230
Position of Oostersee Electrical connection box on exterior wall to be determined on site.

1,200
BEDRM 2 BEDRM 1 NOTES:
(Carpet) (Carpet) Figured dimensions takes preference to scaled dimensions.

2,020
All relevant levels and dimensions to be verified on site prior to construction.

W6

2,940

2,620
900
All work to comply to NBR, Local Bylaws and Municipal Regulations.

(900x1100)
3,050
All levels to be determined on site and can/may be to adjusted to the descrepancy of the

90
developer and his appointed builder. Developer to approve plan prior to submission to
PLASTER & PAINT
council.

90
All glazing to SANS 10137 & SANS 10400-N. Printed dimensions take preference over
BATH RM

W3
4 scaled dimensions. All work to be carried out in strict accordance to NBR and local

600
90
(Tiles)
TV
ELEVATION 3 bylaws.

2,700

(600x900)
SCALE 1:100
A A

7,600
7,600
Finishes in builders contract takes preference over finishes specified on plan.

2,020
In case of discrepancies the author of the plan should be contacted before proceeding
with any construction.

ROOF

4,430
HWC IN

2,160

90
W2
4,000
1,200
LOUNGE

(1200x1200)
(Tiles)

900
KITCHEN

2,320
(Tiles) PD26

WHEN FULLY OPEN


230
1,600

DOOR TO CLEAR REVEAL


1,000

FIT PROJECTING HINGES TO


600

230
230
W5 W6
(900x900) 480 (900x1100) PLASTER & PAINT
790 900 900 865 900 865
37 VAN DER STEL STREET P.O. BOX 1399 TEL: 021 906 6770
230 90 230 ELEVATION 4 KUILSRIVER KUILSRIVER FAX: 021 906 6775
1,710 3,440 SCALE 1:100 7579 7580 EMAIL : nationhousing@mweb.co.za
230 230 230 230
1,710 900 2,170
ELECTRICAL HOUSE PLAN- Type1-43sq.m GAP DATE : 2017
5,700
TELEPHONE POINT Type 1 43 sq.m
PROPOSED NEW DWELLING DRAWING :
1 CEILING LIGHT POINT RIDGE
SANS 10400-XA FOR ............ ON ERF ..........., PROJECT : MOUNTAIN
NATION HOUSING
WATERPROOF LIGHT POINT
AREA HOUSE : 43 sq.m HWC DETAILS: 15 AMP PLUG POINT
MOUNTAIN RIDGE ESTATE SCALE : 1:100
FLOOR PLAN PIPING 15mm AND 22mm CLASS 1
SCALE 1:100 AREA ERF : 177 sq.m COPPER TUBE 15 AMP UNDERCOUNTER
HWC KWIKOT ECONO STD GALV. 150L MOUNT PLUG POINT
COVERAGE: 24.29%
GEYSER.
LAGGING (R=1) ON ALL EXPOSED PIPES 15 AMP PLUG POINT 2000mm HIGH
WALLS EXT. 230 CAVITY
INT. 90 x 190 mm DISTRIBUTION BOARD
W2= 1.2x1.2 = 1.44 sq.m
W3= 0.6x0.9 = 0.54 sq.m TV TV POINT
NOTE: W5 = 0.9 x 0.9 = 0.81 sq.m
FFL ABOVE NGL TO BE W6= (0.9x1.1) x 3 = 2.97 sq.m
STOVE CONNECTION
TOTAL = 5.76 sq.m
DETERMINED ON SITE. NETT FLOOR AREA : 35.36 sq.m
MINIMUM 150mm. FENESTRATION PERCENTAGE : 16.28 % BALL FITTINGS TO ALL LIGHT POINTS

You might also like