Professional Documents
Culture Documents
Harith
Semester I 2017/2018
1.0 OBJECTIVES
1. The KA 31903 design project requires each team to demonstrate a good knowledge of reinforced conctrete
design.
2. Additionally, each team must demonstrate good report writing.
2.0 APPROACH
It is anticipated that each team will work at least 3 hours per week on the project. The expected timeline for
activities, goals achieved, and submissions for the project will be as follows:
Week Dates Activities and Goals
2 18/09 22/09 Draw or find UMS architectural and engineering building drawings
3 25/09 29/09 Estimate permanent and service loads on structure
4 02/10 06/10 Conduct analysis and determine shear & bending moment
7 23/10 27/10
Design of reinforced concrete slabs
8 30/10 03/11
9 06/11 10/11
Design of reinforced concrete beams
10 13/11 17/11
11 20/11 24/11 Design of reinforced concrete columns
12 27/11 01/12
13 04/12 08/12 Write and Review Final report
14 11/12 15/12
15 18/12 21/12 Report Submission (Last submission: 21/12/2017, 5.00 PM)
As such all team members are expected to contribute equally to the overall project. Please keep track of your
individual contributions and those of other members in your group. At the end you will be required to grade your
KA31903 Reinforced Concrete Design 1 Dr. N. Sheena H. Harith
Semester I 2017/2018
team members efforts and contributions. If possible, briefly indicate individual efforts and contributions in the
preliminary and final project reports.
The project teams goal was to design an architectural plan and structural system that is cost effective, safe, and
accommodating to the proposed use.
All principle structural members were designed, including slabs, beams and columns.
All standard load combinations are considered and members are designed to resist the ultimate, factored loads.
GROUP X
ACKNOWLEDGEMENTS i
PROJECT DESCRIPTION ii
TABLE OF CONTENTS iii
LIST OF ABBREVIATIONS vi
LIST OF SYMBOLS vii
1 Layout of Building 1
1.1 Architecture Drawing 5
1.1.1. Plan View 15
1.1.2. Side View
1.1.3.
1.1.4.
1.2 Structural Drawing
1.2.1. Plan View
1.2.2.
1.2.3.
2 Loading
3 Analysis and Design
3.1. Design of Beam
3.2. Design of Column
3.3. Design of Connection
4 Design Summary
5 Appendix
Project Title: Designed by: Sheet No.
Checked by:
Design Title: Date
Reference Calculation Output
No. ID number Design: KA30603: Structural Steel and Timber Design
1 1/A Connection Date: xx May 2017 Wednesday
Name 1 Matrix No. 1
SCALE
Name 2 Matrix No. 2
Name 3 Matrix No. 3
Name 4 Matrix No. 4 1:100
Name 5 Matrix No. 5
Faculty of Engineering Civil Engineering Program HK01 Group 1