You are on page 1of 51

Version

st rial
u
Ind

Conference Exhibition
Manufacturing, Machining, Repairing
& Advanced Material for Oil & Gas Industry
Where technology Brings materials to life
Atlantis, The Palm - November 17-20, 2014. Dubai,UAE

uring
f act Mac
u hinin
an g
M s
s e
c es
ro
&P
ials
d Mater
ance
Adv

g
in Organizers Organizers of Past AMPT in the Region
ir
a
p
e
R

www.ampt2014.com
Welcome

It gives me a great pleasure to invite you, on behalf of the


Advanced Material & Processing Technologies Conference for
Oil & Gas Industry organizing committee, to participate by
Sponsoring/exhibiting in this coming event which will be held
under the leadership of Mr. Nabeel A. Al-Jama Executive
Director of Saudi Aramcos Industrial Services at Atlantis
The Palm, Nov. 17-20, 2014, Dubai, United Arab of Emirates.

The Advanced Material & Processing Technology Conference


for Oil and Gas Industry (AMPT) is a major multi track
conference that will bring experts from within and outside
Middle East to discuss some of the latest technologies and
concepts for the advanced material & its latest processes in
manufacturing, machining, repairing, w e l d i n g , c o a t i n g
& monitoring to serves the Oil and Gas Industry in the most
efficient, cost effective and professional manner. Leading international speakers will be presenting papers
covering a wide range of topics within the various technical.
streams. The papers will be of the highest standards and deal
with the current issues facing in the industry.

The conference is expected to attract attendees from energy


capitals around the world, up to date more than 500 technical
papers have been submitted in the conference.

Your company & your personal support will contribute


significantly to the success of this conference. We look forward
to your presence and contribution as sponser and/or exhibitor to
this focused event organized and sponsored by Saudi
Aramco,SABIC, ASM Saudi Chapter, Masdar, and Protective
Coating Society.

Mr.Yasser A. Al-Shehri, MSc.


Conference Exhibition Chairman
Saudi Aramco,KSA

1 www.ampt2014.com
Message from Chairman of the AMPT Steering Committee
It is my real pleasure to invite the community of research
academics and Postgraduate students to participate in the
AMPT2014 International Conference which will be held in Palm
-Dubai during 17 20 November 2014. Dubai as a location for
the AMPT2014 Conference offers easy access by participants
from all over the world. The conference will be organized by
experienced Local Organizing Committee led by the Conference
Chair and Co-Chairs who have experience of organizing
previous AMPT Conferences in 1998(Malaysia) and
2008(Bahrain) and a number of many other international
conferences in the region.
In addition there is great prospect of participation by
researchers from local industrial organizations and the potential
for securing sponsorship from prominent industrial
organizations from within the region.
On behalf of the AMPT Steering Committee I am urging you to
submit an abstract and participate in the AMPT2014
am confident that this experienced Local Organizing Committee
International Conference. Extended versions of selected papers
will make the AMPT2014 a memorable event for all the
(250 - 300) from the conference will be published, after peer
participants. As the Chairman of the AMPT Steering Committee I
review, in a number of ISI indexed journals like, J. of Machining
am cordially inviting you to attend this memorable and most
Science and Technology, Int. J. of Sustainable Manufacturing, Int.
enjoyable gathering of old and new friends and colleagues
J. of Material Forming, and in the new Int. J. of AMPT which will
belonging to the community of scientists and practicing
be launched before the conference". Another 150 - 200 papers
engineers from all over the world.
will be published in special issues of a number of other journals".I

Professor M. S. J. Hashmi PhD, DSc.


Chairman of the AMPT Steering Committee

www.ampt2014.com 2
Advances in Materials & Processing Technology Conference

WHY AMPT 2014 ?

It is the conference that connects different parts of the Globe


Portugal Ireland Poland
1997 1993,1995 2004
1999, 2003

Korea
2007

Taiwan
Paris 2013
2010

USA Spain
2006 2001

Turkey Bahrain
2011 2008

Malaysia
1998, 2009

UAE Australia
2012
2014
The Advances in Materials and Processing Technologies (AMPT
2014) is sponsored by AMPT Programs and organized by the
American Society of Materials (ASM Saudi Chapter) in
cooperation with The Society for Protective Coatings
(SSPC),Saudi Aramco (largest oil company in the world), Qatar
University (QU), Prince Mohammad Bin Fahd University (PMU)
as one of the largest private universities in the Kingdom of
Saudi Arabia, and Masdar Institute of Science and Technology
(Masdar Institute) as one of the best research-oriented
universities focused on alternative energy and sustainability for
the GCC region.
The annual AMPT conference is a premiere international
meeting and one of the largest metals forming, fabricating,
welding and finishing events designed to be an interface
between researches and engineering for the presentation of
ideas, work and results to transfer to engineering development
of the globe.

3 www.ampt2014.com
Organizers of AMPT2014

Owned by the Saudi Arabian Government, Saudi Aramco is a fully-integrated, global petroleum enterprise,
and a world leader in exploration and producing, refining, distribution, shipping and marketing, with a
legacy of more than 100 years of achievements and success. Saudi Aramco manages proven reserves of
259.8 billion barrels of oil, the largest of any company in the world, and manages the fourth-largest gas
reserves in the world. The companys maximum sustained crude production capacity is currently more than
14 million barrels per day.

Masdar Institute of Science and Technology is the worlds first graduate-level university dedicated to
providing real-world solutions to issues of sustainability. The Institutes goal is to become a world-class
research-driven graduate-level university, focusing on advanced energy and sustainable technologies.
Located in the Masdar City in Dubai, the capital of the United Arab Emirates, Masdar Institute aims to
support Dubais economic diversification by nurturing highly-skilled human and intellectual capital and
partnering with industry leaders.

In 1977, Qatar University was founded with four new colleges; Education, Humanities & Social Sciences,
Sharia, Law & Islamic Studies, and Science. The College of Engineering was later established in 1980,
followed by the College of Business and Economics. The University added the Pharmacy Program to its
academic portfolio in 2006 the first in Qatar -- and later established it as the College of Pharmacy in 2008.
Today, Qatar University comprises seven colleges. The university has over the years added a wide range of new
programs that are aligned with the growing needs of the labor market and the aspirations of the society it serves.

Prince Mohammad bin Fahd University (PMU) is one of the best private universities on the GCC region. PMU
concentrates on the needs, interests and abilities of students for sustainable nourishing. This university
welcomed latest technology since its inception. It implemented them in the teaching methodology and
curriculum development. Today PMU is equipped with advanced technologies which are beneficial for
students to get registered in specific courses and avail regular advice or guidance from the respective
instructors online by sitting in the privacy of homes.

ASM Saudi Chapter is one of ASM International chapters distributed all over the globe. ASM International is
100 years old society. ASM is where materials users, producers, and manufacturers converge to do business.
INTERNATIONAL
ASM Saudi Chapter was established to bridge Gulf Region & USA together in materials community by
R
providing technical knowledge, education, networking and professional development, and by organizing
The Materials
Information Society
technical events and international conferences in the region. More importantly it is to form a community for
all the local market (Manufacturers, vendors and contractors) to exchange information and use ASM internal
standards through ASM International-Saudi Chapter.

www.ampt2014.com 4
Advances in Materials & Processing Technology Conference

Organizers of AMPT2014

SSPC: The Society for Protective Coatings was founded in 1950 as the Steel Structures Painting Council, a
non-profit professional society concerned with the use of coatings to protect industrial steel structures. In
1997, the name of the association was changed to The Society for Protective Coatings to better reflect the
changing nature of coatings technology and the ever-expanding types of construction materials. SSPC is the
leading source of information on surface preparation, coating selection, coating application, environmental
regulations, and health and safety issues that affect the protective coatings industry.

Knowledge Awareness EXPO Technical Services (KATS) is an event organizing firm that has been working
actively in Saudi Arabia in specific and Gulf Region in general. KATS has a wide variety of organizing business
within Oil, Gas, and Petrochemical Industries. More than 200 technical events and International conferences
has been organized over the years with Saudi Aramco, SABIC, and the private sectors in the area. KATS is a
well recognized organizing firm in the industry and has been awarded many times for their work excellence
& optimal efficiency.

5 www.ampt2014.com
Scope of Conference

Materials Metallic Material, polymers, ceramics, biomaterials, magnetic materials, electronic materials,
semiconductor and other advanced materials

Welding Welding Applications including Metallic and Non-Metallic Materials, Welding Proccesses.

Protective Coating Advanced coating application systems, FBE, Liquid coating, epoxy based coating, etc.

Processing of New and Fabrication of Composites, Nano crystalline Multilayer and Smart Materials,
Advanced Materials Machining of Composites and Advanced Alloys etc.

Laser Processing Cutting, Welding, Bending, Surface Modification, etc.

Precision Engineering/ Microforming, electroforming, nanofabrication, nanofilms, nanowires, net shape manufacturing,
Nanotechnology processes nanofabrication, micromachining, nanoparticles, MEMS etc.

Powder Forming Isostatic Pressing, Sintering, Metal and Ceramics Injection Molding, etc.

Surface Engineering Deposition, Treatment and Characterization Technologies, Electrically Enhanced Coatings,
Thermal coatings, surface modification, surface integrity PVD, CVD.

Deformation Processing Bulk Forming Processes: Rolling, Machining, Sheet Forming & Stamping Net-Shape Forming,
Super plastic Forming, Severe Plastic Deformation processes (ARB, ECAP, HPT) ect.

Nano Technology Infused Matrix Materials, Micro Alloying, Grain Refinement, Lubrication, Surface treatments, etc.

Computer Aided Engineering/


computational mechanics FEA, CAD, CAM, CIM, rapid prototyping, modeling and emulation.

Others related Processes Thermal Mechanical Treatments, Processes of Polymeric Materials, Die-manufacturing processes,

etc.

www.ampt2014.com 6
Keynote Speakers

Mr. Nabeel A. Al-Jama


Executive Director of Saudi Aramcos Industrial Services, Saudi Aramco
INFLUENCE OF ADVANCED MATERIALS MATERIAL IN THE FUTURE OF OIL AND GAS INDUSTRIES

Mr. Al-Jama holds a B.S. & M. Sc. degree in City/Community Regional Planning from KFUPM. He attended the Senior `
Executive Program at London Business School in 2004 and the Executive Influence Program at London Royal Academy of
Dramatic Art in 2005. Mr. Al- Jama started his career with Saudi Aramco back in 1980. He held several management positions in the areas
of Community Services, Medical Operations, Training & Development, Oil & Gas Industrial Services and his current position is Executive
Director of Saudi Aramcos Industrial Services Organization. Mr. Al-Jama has participated as a member in a number of corporate initiative
efforts including the Employee Relations and Training (ER&T) Future Directions Task Force, the Team Leader of the Corporate Optimization
Portfolio Strategic Imperative Team and as a member of the Aramco Overseas Company (AOC) Due Diligence Task Force. Mr. Al-Jama is the
Chairman of the Saudi Aramco Corporate Maintenance Council. He is also Chairman of the Global Oil Spill Committee.

Mr. Mohammed A. Al-Sultan


Manager of Mechanical Services Shops Department, Saudi Aramco
ADVANCED MATERIALS OF OIL AND GAS: CHALLENGES AND OPPORTUNITIES

Mr. Al-Sultan has 32 years of extensive experience with Saudi Aramcos overall maintenance and management fields,
both in Upstream and Downstream as well as in Operations organizations. He has held various leadership positions in
the Company, prior to his assignment as the manager of the Ras Tanura Refinery Maintenance Department and to his
current position as the Manager of the Mechanical Services Shops Department, where he initiated and completed the
development of a Corporate Repair Strategy and Operating Model. His broad knowledge and experience in maintenance
enabled him to lead the corporate initiative to transform maintenance practices to reach best-in-class (BIC) status in maintenance.
It was through this initiative that brought the development and creation of the Saudi Aramcos Maintenance Council, for which he is currently
the Vice Chairman. Mohammad has also worked on numerous initiatives, such as leading the downstream reliability enhancement program
as well as the development of the Operational Excellence program, which was adopted at the corporate level. He holds a bachelors degree in
Electrical Engineering from the University of Southern California, USA and also completed the INSEAD Executive Management Program.

Dr. Waleed Al-Shalfan


Vice President of High Density Polyethylene Business Unit, Sabic
WHEN MATEIALS SHAPE THE FUTURE OF PETROCHEMICAL INDUSTRY
Waleed Al-Shalfan is the Vice President of High Density Polyethylene Business Unit(HDPE BU), effective May 1, 2014.
Prior to that, he was a General Manager of KSA Technology and Emerging Economies in SABIC, and prior to Novem-
ber 1, 2013, he was leading Corporate Programs and Venturing at SABIC in Riyadh since June 1 2012, and was also
the General Manager of SABIC Technology Center in Jubail since November 2009. From December of 2006 till November of 2009, he was
the manager of Metals Technology Section at STC-J. Prior to that and since November 1991, Waleed was working as a physical metallurgy
scientist conducting research and development studies serving SABICs iron and steel business. He holds a Ph.D degree in Materials Science
and Engineering from the Colorado School of Mines, USA, a Master degree in Advanced Metallurgy from Sheffield University, UK, and a
Bachelor degree in Mechanical Engineering from King Saud University, Saudi Arabia. He has delivered many presentations, and has published
many technical papers, at regional and international forums.

7 www.ampt2014.com
Dr. Michele Ostraat
Research Center Leader for Aramco Research Center Boston
DEVELOPMENT AND OPTIMIZATION OF ADVANCED MATERIALS AND NANOTECHNOLOGY-ENABLED SOLUTIONS

Dr. Michele Ostraat has extensive experience in building and leading scientific teams in the development and optimization of advanced
materials and nanotechnology-enabled solutions for various industries. She brings her technical background in aerosols
and nanomaterials to create, manage, and lead innovative teams and programs designed to accelerate technical innovation through
development and optimization of advanced materials. Prior to joining Aramco Research Center - Boston, Dr. Ostraat was Senior Director of
the Center for Aerosol and Nanomaterials Engineering at RTI International where she led scientific teams developing products and applica-
tions for aerosols and nanomaterials for energy and health-related technologies. She also worked at DuPont in aerosol synthesis and
characterization of sub-micron and nanoparticles for advanced electronic applications and was a Member of Technical Staff at Bell Labs and
Agere Systems where she examined the synthesis of rare-earth doped aerosol nanoparticles and investigated the behavior of chalcogenide
phase change materials. She earned her Ph.D. and M.S. degrees in Chemical Engineering from the California Institute of Technology and
her B.S. degree in Chemistry from Trinity University.

Professor Jos M. Torralba


Professor of Materials Science and Engineers at Universidad Carlos III De Madrid
POWDER INJECTION MOLDING: A RELIABLE WAY OF PROCESSING OF SMALL PARTS OF COMPLEX SHAPES

Professor Torralba received his bachelor degree from Technical University of Madrid as Metallurgical Engineer in 1982
then his Master in material engineering from the same university in 1985. Then, he became a Dr. Eng. in Armament
and Material Engineering (1986, Escuela Politcnica Superior del Ejrcito EPSE-), Dr. Eng. (1994, EPSE). From 1996, Head of the Powder
Metallurgy Research Group (Universidad Carlos III Madrid). His main scientific-technical field of interest is Powder Metallurgy. Since 1982 he
has worked with different sintered materials families and he has been involved in technologies like mechanical alloying or metal injection
modeling. He has published more than 400 scientific papers (175 in the Web of Science-Journal Citation Report with more than 1300
cites).Professor Torralba has supervised 21 PhD thesis and 60 Diploma Thesis. He has participated in more than 60 international scientific
committees of International Conferences and being Chairman of 7 of them (Chairman of AMPT 2001, Thermec 2003, Co-chairman of
EUROPM 2003 (Valencia). CO-chairman of the I, II, III and IV Spanish PM National Congress). He is Regional Editor (for Europe) of Journal of
Materials Processing Technology and Journal of Achievements in Materials and Manufacturing Engineering.

Professor Dermot Diamond


Director: National Center for Sensor Research, Dublin City University
STIMULI-RESPONSIVE POLYMERS: THE KEY TO REALISING LOW-COST AUTONOMOUS CHEMICAL SENSING
PLATFORMS WITH REVOLUTIONARY CAPABILITIES
Dermot Diamond received his Ph.D. and D.Sc. from Queens University Belfast (Chemical Sensors, 1987, Internet Scale
Sensing, 2002), and was Vice-President for Research at Dublin City University (2002-2004). He has published over 300
peer-reviewed papers in international journals, is a named inventor in 18 patents, and is co-author and editor of four books. He is director
and founding member of the National Centre for Sensor Research (www.ncsr.ie) at Dublin City University, and an SFI-funded investigator in
the INSIGHT Centre (http://www.insight-centre.org). In 2002, he was awarded the inaugural silver medal for Sensor Research by the Royal
Society of Chemistry, London, and in 2006 he received the DCU Presidents Award for research excellence. His research is focused on the
fundamental science of stimuli responsive polymers, the development of futuristic autonomous chemical sensing platforms, and the use of
analytical devices and sensors as information providers for wireless networked systems i.e. building a continuum between the digital and
molecular worlds.

Professor Munir Nayfeh


Professor of Physics at University of illinos
INFLUENCE OF NANO TECHNOLOGY IN OIL & GAS INDUSTRY
Professor Munir Nayfeh received his bachelor's and master's degrees from the American University of Beirut in 1968,
and 1970, respectively. He earned a Ph.D. in physics from Stanford University in 1974. He served as a postdoctoral
fellow and research physicist at Oak Ridge National Laboratory from 1974-1977, and as a lecturer at Yale University in
1977, before joining the physics faculty at the University of Illinois in 1978. He was the first to demonstrate isotope separation using this
process and the first physicist to examine the behavior of hydrogen molecules in intense laser fields, and his seminal work in this area initiated
a whole new area of research in molecular Coulomb explosions. Most recently, Professor Nayfeh has investigated the fabrication and the
analysis of nanometer-scale structures by employing STM to study hysteresis effects in the formation of matter. This work provides physical
insights on the fundamental nature and interactions of solids at nanometer/atomic scales, and it has significant implications for near-term
technological applications in nanoelectronics and photonics .

www.ampt2014.com 8
Advances in Materials & Processing Technology Conference

Exhibition Scope

1. Manufacturing 2. Machining
Latest manufacturing in rotating & static equipment. Latest surface modification techniques.
Advance machining solutions to improve materials
Manufacturing of gears & shafts.
fitness and reliability.
Advancements in manufacturing Gas Turbines Components.
Advancements in Machining Rotating Equiment Components.
Advancements in critical components of pumps &
Advanced processes in machining industry.
compressors.
Latest technologies of manufacturing motors & stators. Latest sizing techniques.

Up to date development in the area of valves & Deformation simulations programs.


actuators.
Alternative manufacturing processes.

3. Industrial Repair 4. Advanced Materials


Latest repair techniques for pumps & compressors Specially developed materials in oil & gas industry.
Improvements in repairing techniques of rotating equipment. Metallic material, polymers, ceramics & biomaterials.
Advancements in NDT and fitness of service. Magnetic materials, electronic materials, semiconductors
Repairing of valves critical components. & other advanced materials.

Use of advanced material defects detection & software Latest technologies on backing and geotextiles.

simulation techniques.
Using latest technologies in materials coating
processes & repairs.

9 www.ampt2014.com
Professional Program Day 1 (November 17, 2014)

AMPT 2014

16- 20 November 2014 ( November 16 is Registration day)

Time Day 1 (November 17, 2014)

Track 2: Advanced Materials & Processes -


start End Track 1: Materials Characterization & Properties Track 2: Advanced Materials & Processes Track 3: Manufacturing Processes
Biomedical Materials & Applications

8:30 9:30 Opening Cermony


9:30 10:30 Exhibition
Session Title Characterization of Processed Materials Advanced Materials Biomedical Materials & Applications Welding and Joining

Charmin:
TBD TBD TBD TBD
Co-Charmin:

DCT and plastic deformation of austenitic Effects of blending sequence on morphology and
Fabrication and optimization of keratin composite
stainless steel and effect of laser marking on mechanical properties of polypropylene/ethylene- A Review of the Semi-Solid Processing of Steel
scaffolds for biomedical applications
strain-induced martensite octene copolymer/clay nanocomposites
Paper ID: 127
Paper ID: 88
Paper ID: 27 Paper ID: 14

Sedigheh Bagheri Kazemabad 1a, Alireza Khavandi 1b,


10:45 11:00 Daniel Fox 2, Yanhui Chen 2, Hongzhou Zhang 2, and Prachi Kakkar 1a, Ramesh Kannan 1b, Balaraman Madhan
Biqiong Chen 3c; 1-School of Metallurgy and Materials 1c, Ganesh Shanmugham 2d; 1-Center for Human and
Vojteh Leskovekaa, Matja Godecb, and Peter Engineering, Iran University of Science and Technology Organizational Resource Development, Central Leather
Ahmed Rassili 1a; 14 Bd de Colonster, B-4000 Liege, Belgium.
Kogejc; Institute of metals and technology, Lepi pot (IUST), Narmak, Tehran, Iran., 2-School of Physics and Research Institute, Adyar, Chennai-600085, India, 2-Bio-
11,1000 Ljubljana, Slovenia CRANN, Trinity College Dublin, College Green, Dublin 2, organic Department, Central Leather Research Institute,
Ireland, 3-Department of Materials Science and Adyar, Chennai-600085, India.
Engineering, University of Sheffield, Mappin Street, Sheffield
S1 3JD, U.K.

Microstructural Evolution of A380 Aluminum Alloy AN ALTERNATIVE ROUTE FOR BATCH PRODUCTION
Synthesis and micro-structure of dense and porous Effect of Laser Welding Parameters on Weld Bead
Produced by Gas Induced Semi-Solid Technique OF FDM PATTERN BASED IMPLANTS PREPARED BY
PCN-PZT ceramics Penetration and Width
(GISS) COMBINING VACUUM MOULDING AND STIR CASTING
Paper ID: 25 Paper ID: 188
Paper ID: 36 Paper ID: 98

www.ampt2014.com
11:00 11:15
S.G. Shabestari 1, a, M. Honarmand 2, b, H. Saghafian
3, c; Center of Excellence for High Strength Alloys M.K.A Ariffin 1a, S.Sulaiman 2b, and Ismail Nur Fazlina 3c; 1-
F.F. Abdullah*a, A. Nematib, R. Bagheric, and B.T. Maroufd;
Technology (CEHSAT), Rupinder Singh 1a, and Gurinder Singh 1b; 1-Dept. of Department of Mechanical and Manufacturing Engineering,
Department of Materials Science and Engineering, Sharif
School of Metallurgy and Materials Engineering, Iran Production Engineering, GNDEC, Ludhiana, India. Faculty of Engineering, UPM, Selangor, Malaysia
University of Technology, Tehran 11155-9466, Iran.
University of Science and Technology (IUST),
Narmak, 16846, Tehran, Iran.

10
Professional Program Day 1 (November 17, 2014)
Effect of silica fume and Algerian calcined clays as INVESTIGATION OF THE WELD-LINE MOVEMENT AND
Study of the formation of adiabatic shear bands Selenium Incorporated Hydroxyapatite Coating on Ti
pozzolanic materials on the properties of Ultra high- SPRINGBACK OF TAILOR WELDED BLANKS DURING
during impact alloy
performance fiber reinforced concrete (UHPFRC) DRAW-BENDING PROCESS
Paper ID: 111 Paper ID: 100
Paper ID: 42 Paper ID: 321
Bengi Ylmaz 1a, Zafer Evis 1,2,b*, Ayen Tezcaner 1,2,c,
11:15 11:30 B. Dawood 1a, M. Shazly 2b, A.S. Wifi 3c, and A. ElMokadem
Sreeparna Banerjee 1,3,d; 1-Department of Biomedical
3d; 1-Manufacturing Department, Modern Academy for
Engineering, Middle East Technical University, 06800,
Nabil Bassim1 and Solomon Boakye-Yiadom2; B. Rabehi, Y. Ghernouti, and K. Boumchedda; Research Engineering and Technology, Egypt, 2-Mechanical Engineering
Ankara, Turkey, 2-Department of Engineering Sciences,
12Department of Mechanical Engineering, University of Unit: Materials, Processes and Environment, University Department, British University in Egypt, Al-Sherouk, Egypt, 3-
Middle East Technical University, 06800, Ankara, Turkey, 3-
Manitoba, Winnipeg, MB, Canada, R3T5V6 MHamed Bougara of Boumerdes. Algeria. Mechanical Design and Production Department, Faculty of
Department of Biological Sciences, Middle East Technical
Engineering, Cairo University, Egypt
University, 06800, Ankara, Turkey
Study the Effect of Different Liquid Media on the Preparation of Sulfur Nanoparticles and Investigating
MICROSTRUCTURAL DEVELOPMENT OF A Modeling and Optimization of Submerged Arc Welding
Synthesis of Alumina (Al2O3) Nanoparticle by Pulsed their Activities Against Cancer Cells
FRICTION STIR WELDED Ti-6Al-4V SHEET Parameters Using Response Surface Method
Laser Ablation Technique

www.ampt2014.com
Paper ID: 438
Paper ID: 223 Paper ID: 529
Advances in Materials & Processing Technology Conference

Paper ID: 80
11:30 11:45
M.W.B. Santos 1,a , A. Farias 1,2,b , M. Stipkovic Filho
Suha I. Al-nassar 1, Adel. K.M 2, and Zaineb F. Mahdi 3; Omar M Elmabrouk; Industrial and Manufacturing System
1,3,c and G.F. Batalha 1,d; 1 Dep. Mechatronics and Mohammed Suleiman, Ayman Hussein, and Anas Al-Ali;
1,2 -College of Engineering, Diyala University, Iraq & 3- Engineering, Department, Engineering Faculty, Benghazi
Mechanical Systems Engineering University of Sao Department of Chemistry, Science College. AN-Najah
Laser Institute for Postgraduate Studies, Baghdad University, Benghazi-Libya.
Paulo Av. Prof. Mello Moraes, 2231, Cidade National University, P. O. Box 7, Nablus, Palestine.
University, Iraq
Universitria, 05508-030, Sao Paulo, Brazil.
Study on influence of effective parameters on Manufacturing and evaluation of magnesium-based
The variation of magnetic properties of nickel ferrite Toughness Modeling of Dissimilar Laser Welded
wear behavior of wheel and rails through ADAMS- surfaces with porous and micro-Scale Features for
by annealing Components
RAIL software biomedical applications
Paper ID: 155 Paper ID: 613
Paper ID: 383 Paper ID: 463
11:45 12:00 AydinTahmasebifar 1a, Said Murat Kayhan 2b,Zafer Evis
1c*, Yusuf Usta 3d, Muammer Ko 2e; 1-Middle East
Technical University, Dept. of Engineering Sciences, Ankara,
Majid Elyasi 1a, Milad Hadinezhad 2b, Mohammad H. Moradmard, and S. Farjami Shayesteh; Nanostructure E. M. Anawa; Industrial & Manufacturing Eng., Benghazi
06800, Turkey, 2-Istanbul Sehir University, Dept. of
Rajabi 3c, Majid Abbasi 4d; Babol University of Lab, Department of Physics, University of Guilan, Rasht, University, Benghazi, Libya.
Industrial and System Engineering, Istanbul, 34660,Turkey,
Technology, Babol, Mazandaran, Iran. Iran
3-Gazi University, Dept. of Mechanical Engineering, Ankara,
06570, Turkey.
12:00 13:00 Lunch
13:00 13:45 Keynote

11
Professional Program Day 1 (November 17, 2014)

13:45 14:00 Break

Session Title Characterization of Processed Materials Advanced Materials Biomedical Materials & Applications Welding and Joining

Charmin:
TBD TBD TBD TBD
Co-Charmin:

Synthesis of Nano-HA and the Effects on the


Study of the effect of process parameters on The wave densification in high-voltage consolidation Microstructural and mechanical characterization of thin
Mechanical Properties of HA/UHMWPE
wear rate of powder materials plates welded of aluminum alloy 2024 by Tig proccess
Nanocomposites
Paper ID: 387 Paper ID: 531 Paper ID: 700
Paper ID: 473

14:00 14:15 S. A. Mirsalehi,1 A. Khavandi 1, * SH. Mirdamadi 1, M. Reza


Naimi-Jamal 2, S. Roshanfar 1, H. Fatehi-Peykani 1; 1-Iran
Evgeny Grigoryev, Eugene Olevsky, Artem Yudin, and Maria University of Science and Technology (IUST), School of
Milad Hadinezhad 1a, Majid Elyasi 2b, Mohammad
Yurlova; National Research Nuclear University MEPhI Materials Science and Engineering, Composite Laboratory, Miss. Leila Belgacem; research center of weding and NDT,
Rajabi 3c, Majid Abbasi 4d; Babol Noshirvani University
(Moscow Engineering Physics Institute), Narmak, Tehran 16846-13114, Iran, 2-Iran University of Zeralda, Algeria.
of Technology, Babol, Mazandaran, Iran.
Kashirskoe sh. 31, Moscow, 115409, Russia Science and Technology (IUST), School of Chemistry,
Research Laboratory of Green Organ-ic Synthesis and
Polymers, Narmak, Tehran 16846-13114, Iran

A Study on Wear Behaviour of Laser Direct Metal ZnO/ZnMgO: Cubic quantum well laser in UV MODELING OF SHAPE MEMORY ALLOYS FOR MICROWELDING OF AISI 316L THIN FOIL USING
Deposited High Strength H13 Tool Steel spectrum MEDICAL DESIGN IN ROBOTICS PULSED Nd:YAG LASER

Paper ID: 521 Paper ID: 169 Paper ID: 516 Paper ID: 276

14:15 14:30
Riane Houaria 1a, Bekhti-Siad Amaria 2b, Hamdache
Syed H Rizaa, S.H. Masoodb, and Cuie Wenc; R. Leticia Corral-Bustamante 1a, and Jos Nino Hernndez-
Fatima 1c, and Bahlouli Samia 1d; 1-Laboratoire de V.A. Ventrella, and W. de Rossi; Department of Mechanic
Engineering and Technology, Swinburne University of Magdaleno 1b; 1-Technological Institute of Cuauhtmoc
Physique des Plasmas Matriaux Conducteurs et leurs Engineering, Faculty of Engineering Unesp, Brazil
Technology, City, Tecnolgico Ave. S/N, 31500 Cuauhtmoc City,
Applications LPPMCA, faculty of physics, BP, 1505,
Hawthorn, Melbourne, Australia 3122 Chihuahua, Mxico.
ELMnaouar, USTO university, Oran, Algeria.

PERFORMANCE OF COMPOSITE CURVED I-BEAM


INVESTIGATION OF THE WATER LUBRICATED

www.ampt2014.com
SUBJECTED TO BENDING LOADING Auxetic nanocomposite based on styrene butadiene Effect of solution Heat Treatment on Intergranular
TRIBOLOGICAL BEHAVIOR OF MEDICAL GRADE
rubber (SBR) foam with varying nano-carbon loading Corrosion Resistance of Welded Stainless Steel AISI 321
UHMWPE
Paper ID: 536
Paper ID: 163 Paper ID: 457
Paper ID: 598

14:30 14:45

*1a A. Mimaroglu, and 2b H. Unal; 1-University of Sakarya,


M. Tanweer Khan, Muhammad Shahid*, M. Arshad Bashir,
A. A. Khalid; Department of Mechanical Engineering, Faculty of Engineering, Esentepe Kampusu, Adapazari,
and Qurat ulain; School of Chemical and Material Amir Mahmoudi; Sama technical and vocational training college,
Faculty of Engineering, Institut Teknologi Brunei, Turkey, 2-University of Sakarya, Faculty of Technology,
Engineering, National University of Sciences & Technology, Islamic Azad University, Saveh Branch, Saveh, Iran
Brunei. Esentepe Kampusu, Adapazari, Turkey.
Islamabad, Pakistan.

12
Professional Program Day 1 (November 17, 2014)
Multifunctional Energetic Structural Composites: TRIBOLOGICAL PERFORMANCE OF MEDICAL GRADE Microstructure and mechanical properties of dissimilar
Experimental and Numerical Evaluation of the
Epoxy-Rubber Matrix with Nickel Aluminum UHMWPE POLYMER AT EGG ALBUMEN LUBRICATED friction stir welded joints between Al-Mg2Si MMC and
Equilibrium Stress
Reinforcements CONDITION AA6061-T6 alloy
Paper ID: 592
Paper ID: 221 Paper ID: 599 Paper ID: 523
14:45 15:00
D. Zaimova 1,2*, D. Katundi 2, E. Bayraktar 2,3*, and I.
*H. Unal 1a, and A. Mimaroglu 2b; *1-University of
N. Dusunceli 1a, A.D. Drozdov 2b, N. Theilgaard 2c; 1- Miskioglu 3; 1-University of Chemical Technology and A. Moharrami 1a, A. Razaghian 1b, and M. Emamy 2c; 1-Imam
Sakarya, Faculty of Technology, Esentepe Kampusu,
Aksaray University, Aksaray, 68100, TURKEY, 2- Metallurgy, Sofia, Bulgaria, 2-Supmeca-Paris, School of Khomeini International University, Qazvin, Iran, 2-School of
Adapazari, Turkey, 2-University of Sakarya, Faculty of
Danish Technological Institute, Taastrup, 2630, Mechanical and Manufacturing Engineering, France, 3- Metallurgy and Materials, University of Tehran, Tehran, Iran
Engineering, Esentepe Kampusu, Adapazari, Turkey.
DENMARK. Michigan Technological University ME-EM Department,
Houghton, MI-USA

www.ampt2014.com
Advances in Materials & Processing Technology Conference

Graphene Nanosheets (GNS)-reinforced Al2O3 FRICTION AND WEAR OF GUR 1020 MEDICAL GRADE
Mechanical and Metallurgical Properties of Heavy Damage of bolted single-lap joints in aircraft: case of
Nanocomposites Fabricated by High Frequency UHMWPE POLYMER AT DRY ENVIRONMENTAL
Wall Grade X80 High Strain Line Pipe Steel aluminum alloy 2024-T3
Induction Sintering CONDITION
Paper ID: 623 Paper ID: 755
Paper ID: 295 Paper ID: 600
15:00 15:15
I. Ahmad 1a, M. Islam 1b, M. Ali 1c, and A. A. Almajid 2d; 1-
Weihua Sun 1a, Ping Du 1, Zhigang Liu 1, Chaohai Guo Center of Excellence for Research in Engineering Materials,
A Mimaroglu 1a, H Unal 2b, and *A Ozel 1c; 1-University of A. Benhamena 1, L. Aminallah 1, A. Aid 1, and M. Benguediab 2;
1, Runsheng Zhang 1, Lei Zhang 2b, Jinghui Ren 2, Advanced Manufacturing Institute, King Saud University,
Liwei Liu 2; 1-Jinan Steel Company, Shandong Iron P.O. Box. 800, Riyadh 1 1 4 2 1 , S a Sakarya,
u d i Ara b iaFaculty
, 2- of Engineering, Esentepe Kampusu , 1-Laboratoire LPQ3M BP 763, University of Mascara, Algeria, 2-
Adapazari , Turkey, 2-University of Sakarya, Faculty of Department of Mechanical engineering, University of Sidi Bel
and Steel Group Co., Ltd, Jinan, China. 250101, 2- Department of Mechanical Engineering, College of
Technology, Esentepe Kampusu , Adapazari , Turkey. Abbes, BP 89, Cit Ben Mhidi, Sidi Bel Abbes, 22000, Algeria
Julong Steel Pipe Co., Ltd, Nanjing, China. 062658 Engineering, King Saud University, P.O. Box. 800,
Riyadh 1 1 4 2 1 , S a u d i Ara b ia .
15:15 15:30 Break
Session Title Characterization of Processed Materials Advanced Materials Biomedical Materials & Applications Shaping and froming
Charmin:
TBD TBD TBD TBD
Co-Charmin:
Characterisation of Bronze Cu-Sn Obtained by Synthesis of GaN Cauliflower-like Nanostructures via Finite element analysis in static and dynamic behaviors Effects of Grain Boundary Segregation and Precipitation
Sintering Plasma Enhanced-CVD of dental prosthesis during the forging of 30Cr2Ni4MoV Steel
Paper ID: 714 Paper ID: 297 Paper ID: 609 Paper ID: 610
15:30 15:45
Mahdi Gholampour 1a, Amir Abdollah-zadeh 1b, Reza
F. Keraghel 1a, K. Loucif 1b , M.P. Delplancke 2c ; 1- Poursalehi 1c, Leila Shekari 2d, Saied Hatamikhah 1e; 1- N. Djebbar*, B.Serier, and B. Bachir Bouiadjra; Universit
Wenlong Zhao 1a, and Qingxian Ma 1b; 1-Department of
universit Stif 1 I.O.M.P Univ. Ferhat Abbas Algeria, 2- Nanomaterials Group, Department of Materials Engineering, Djillali Liabes de Sidi Bel Abbes, Laboratoire de Mcanique
Mechanical Engineering, Tsinghua University, Beijing, 100084
Ecole polytechnique de BruxellesUniv. Libre Campus du Tarbiat Modares University, P.O. Box 14115-143, Tehran, physique des matriaux
China
Solbosch, Belgium. Iran, 2-Faculty of Energy Engineering and New BP89, Cit Ben Mhidi, sidi Bel Abbes, ALGERIE.
Technologies, Shahid Beheshti University, Tehran, Iran

13
Professional Program Day 1 (November 17, 2014)

Electrification Control for Stable Achievement of


The Combustion synthesis of Ni-Ti Intermetallic Creep of Outlet Pigtail Tubes of Steam Reformer and Grain
Local Hardening of Steel Using Rapid Resistance
Compounds Size Effect on Creep of an Incoloy 800H Material
Heating
Paper ID: 660 Paper ID: 724
Paper ID: 256

Hamad Almostaneer 1; Harry Schrijen 2; Keshab Barai 3; and


Abdulaziz Al-Meshari 1; 1-Manufacturing Center of Excellence
15:45 16:00 (MCE), Materials, Corrosion, & Static Equipment Domain
Seijiro Maki 1a, Yuuki Makida 2b, and Eitoku Nakanishi M. adeli*, M. Mahvi, K. Rezaei Jahromi, M.R. Aboutalebi,
(MCSD), Saudi Basic Industries Corporations (SABIC), Jubail
1c; 1-Division of Mechanical Engineering, Graduate and S.H. Seyedein; School of Metallurgy and Materials
Industrial City 31961, Saudi Arabia, 2-Manufacturing Center of
School of Engineering, Mie University, Engineering, Iran University of Science
Excellence (MCE), Saudi Basic Industries Corporations (SABIC),
1577 Kurimamachiya-cho, Tsu, Mie, 514-8507 Japan, and Technology (IUST), Narmak, Tehran 1684613114 ,
6160 AL Geleen, The Netherlands, 3-SABIC Technology Center
2-Graduate Student of Mie University, 1577 Iran
Jubail (STC-J), Metal Analytical Labs (MAL), Saudi Basic
Kurimamachiya-cho, Tsu, Mie, 514-8507 Japan.
Industries Corporations (SABIC), Jubail Industrial City 31961,
Saudi Arabia

Track 3: Manufacturing Processes


Session Title
Powder Metallurgy and Bonding
Continue Continue Continue
Charmin:
TBD
Co-Charmin:

Effect of powder preform consolidation processes on


Recovery of insecticide methomyl by anionic clays Solid state synthesis of celsian barium aluminosilicate Investigation of Micro-Structure and Creep Life Analysis of
the microstructure and extrusion behavior of miniature
for environmental protection by a multistep firing technique Centrifugally Cast FeCrNi Alloy Reformer Tubes
helical gears for gas-atomized Zn-22wt%Al powder
Paper ID: 65 Paper ID: 300 Paper ID: 193
Paper ID: 517

16:15 16:30

Kyung-Hun Lee 1, Byung-Min Kim 2, and Dong-Hwan Kim 1;


1-Department of Mechanical & Automotive Engineering,
N. BOUDAOUD 1a, A.E.K TAYEB 1b, H.MILLOUDI 1c, Arman Sedghi 1, and Saeideh Dadashiyan 2*; Materials
International University of Korea, 965, Dongburo, Amitava Ghatak 1a, and P.S. Robi 1b, 1-Department of
and A. BENGGEDECH 1d; 1-Oran University Engineering Department, Imam Khomeini International
Munsaneup, Jinju, Gyengnam, South Korea, 660-759, 2- Mechanical Engineering, Indian Institute of Technology Guwahati,
Department of Chemistry chemistry laboratory University, Qazvin 34149-16818, Iran
School of Mechanical Engineering, Pusan National University, Guwahati-781039, India.
materials and environment, 31000 Oran Algrie.
30, Jangjeon-dong, Geumjeong-qu, Busan, South Korea,

www.ampt2014.com
609-735

14
Professional Program Day 1 (November 17, 2014)
Effects of microalloying elements on microstructure- Casting of Three-layer Clad Strip Consisting of Different
Microstructure and Tribological Properties of PTA Improving the adhesion of plastic/metal direct bonding
mechanical response correlations in micro- and Aluminum Alloy Overly Strips by a Vertical Type Tandem
Welded Stellite12 Coating on Steel Substrate by injection molding using surface modifications
nanolayered structures Twin Roll Caster
Paper ID: 116 Paper ID: 537
PaperID: 317 Paper ID: 163
16:30 16:45
Amir Motallebzadeh 1a, Erdem Atar 2b, and Huseyin
Janusz Majta 1a, Krzysztof Muszka 2b, and ukasz Madej
Cimenoglu 1c; 1-Department of Metallurgical and Ren-Yu Yeh 1*, and Ray-Quen Hsu 1; 1-Department of
3c; 1,2,3 AGH University of Science and Technology, Toshio Haga; 15-16-1, Omiya Asahiku Osaka city 535-8585,
Materials Engineering, Istanbul Technical University, Mechanical Engineering, National Chiao Tung University,
Faculty of Metals Engineering and Industrial Computer Japan
34469 Maslak, Istanbul, Turkey, 2-Department of Hsinchu, Taiwan
Science, Mickiewicza 30, 30-059 Krakow, Poland
Materials Science and Engineering, Gebze Institute of
Technology, 41400 Gebze, Kocaeli, Turkey .
DETERMINATION OF OPTIMAL POWDER LOADING
Low cost manufacturing of aluminium-alumina
Impact Response of Sandwiches with Open Cell ROLE OF VARIOUS COMPATIBILIZERS ON THE FOR WATER ATOMISED SS316L STAINLESS STEEL
composites: processing, microstructural aspects and
Cast Metal Foam and GFRP Skins PROPERTIES OF PMMA/CLAY NANOCOMPOSITES POWDER WITH SEWAGE GREASE AS BINDER
properties
COMPONENTS

www.ampt2014.com
Paper ID: 145 Paper ID: 339
Advances in Materials & Processing Technology Conference

Paper ID: 213


Paper ID: 709
16:45 17:00
Manish Kumar 1, S. Arun 2, Pradeep Upadhyaya 3, and G.
Ali Kurun 1a, Emre Kara 1, Halil Aykul 1, Mehmet Pugazhenthi 1*; 1-Department of Chemical Engineering,
enel 2, and nan Ar 3; 1-Hitit University, Indian Institute of Technology Guwahati, Guwahati, India, 2- Azriszul Mohd Amin 1a, Mohd Halim Irwan Ibrahim 1b, Rosli F. Gatamorta 1, E. Bayraktar 1**, 2*, M.H. Robert 1*; 1-
Department of Mechanical Engineering, orum, Turkey, Department of Mechanical Engineering, Indian Institute of Asmawi 1c; 1-Faculty of Mechanical and Munufacturing Mechanical Engineering Faculty, University of Campinas, SP,
2-Dumlupnar University, Department of Mechanical Technology Guwahati, Guwahati, India, 3-Central Institute Engineering, Universiti Tun Hussein Onn Malaysia, 86400, Brazil, 2-Supmeca -Paris, Mechanical and Manufacturing
Engineering, Ktahya, Turkey, 3-Pamukkale University, of Plastics Engineering and Technology (CIPET), Parit Raja, Batu Pahat, Johor. Engineering School, France
Department of Mechanical Engineering, Denizli, Turkey. Ahmedabad, India

15
Professional Program Day 2 (November 18, 2014)

AMPT 2014

16- 20 November 2014


Day 2 (November 18, 2014)
Time

start End Track 1: Materials Characterization & Properties Track 2: Advanced Materials & Processes Track 3: Manufacturing Processes Track 4: Materials Machining Processes

8:00 8:45 Keynote 2

8:45 9:00 Break

Session Title Characterization of Processed Materials Advanced Materials Shaping and froming Modeling, Optimization and Analysis
Charmin:
TBD TBD TBD TBD
Co-Charmin:

Magnetic and Electrical Properties of Aluminium Matrix


Potential of nanoparticles in improving properties of Experimental and Finite Element Studies of Warm Deep Modeling methods for end mill grooves based on
Composite reinforced with Magnetic Nano Iron Oxide
spring steel Drawing of Ti-6Al-4V Alloy different wheel geometries
(Fe3O4)
Paper ID: 352 Paper ID: 233 PaperID: 756
Paper ID: 220

9:00 9:15
B. Podgornik 1a, F. Tehovnik 1b, M. Torkar 1c, M. Godec
Nitin Kotkunde 1a, Amit Kumar Gupta 1b, Swadesh Kumar
1d, and B. Seni 2,3,e; 1-Institute of Metals and
L-M-P. Ferreira 1, E. Bayraktar **2, and M-H. Robert *1; 1- Singh 2c; 1-Department of Mechanical Engineering, BITS- Li Guochao 1a, Sun Jie 1b*, Li Jianfeng 1c; 1-Key
Technology, Lepi pot 11, SI-1000 Ljubljana, Slovenia, 2-
University of Campinas, UNICAMP, Mechanical Engineering Pilani, Hyderabad Campus, Hyderabad-500078, Andhra Laboratory of High Efficiency and Clean Mechanical
tore Steel d.o.o., elezarska c. 3, SI-3220 tore,
Faculty, Campinas-Brazil, 2-Supmeca - Paris, School of Pradesh, India, 2-Department of Mechanical Engineering, Manufacture of MOE, School of Mechanical Engineering,
Slovenia, 3-CO BIK, Tovarnika c. 26, SI-5270 Ajdovina,
Mechanical and Manufacturing Engineering France GRIET, Hyderabad-500072, Andhra Pradesh, India Shandong University, Jinan, China
Slovenia

www.ampt2014.com
Study of effect on flow rate for planar type polymer
Study of ball milled nanocrystalline Fe-50%Al alloy: Early Time Perturbation Solution of Solidification on a Modeling and optimization of the process parameters
based diaphragm piezoelectric actuated valveless
Structural and magnetic properties Coated Sinusoidal Mold of Finite Thickness in ultrasonic-assisted wire electrical discharge turning
micropump for insulin delivery
Paper ID: 418 Paper ID: 248 Paper ID: 267
Paper ID: 222

9:15 9:30
Aminollah Mohammadi 1a, Alireza Fadaei Tehrani 2b, and
Amir Abdullah 3c; 1-Department of Mechanical
S. Revathi, and R. Padmanabhan; VIT University-Chennai, Engineering, Isfahan University of Technology, Isfahan,
S. Rajan, R. Shukla, A. Kumar, A. Vyas, and R. Brajpuriya; Mehmet Hakan Demir 1a, Faruk Yigit 1b; 1-Department of
Vandalur-Kelambakkam Road, Chennai 600127, Tamilnadu, 84156-83111, Iran., 2-Department of Mechanical
AMITY UNIVERSITY HARYANA, PANCHGAON, MANESAR, Mechatronics at Yildiz Technical University, Istanbul, Turkey
India Engineering, Isfahan University of Technology, Isfahan,
GURGAON , INDIA
84156-83111, Iran., 3-Department of Mechanical
Engineering, Amirkabir University of Technology, Tehran,
15875-4413, Iran.

16
Professional Program Day 2 (November 18, 2014)
Hardness Inhomogeneity and Microstructure Stability in Analytical Modelling Of Surface Roughness During
A STUDY OF THE THERMOELECTRICAL PROPERTIES Polymer Nanocomposites: Functionalization of the
Aluminum-Copper Alloys processed by Equal Channel Compacted Graphite Iron Milling Using Ceramic
OF AL-7XXX MATERIALS Nanofiller and Control of the Interface
Angular Pressing Inserts
Paper ID: 488 Paper ID: 419
Paper ID: 291 Paper ID: 344
9:30 9:45 Cosimo Carfagna 1a, Veronica Ambrogi 1,2a, Roberto
Avolio 1c, Pierfrancesco Cerruti 1d, Maria Emanuela Errico
. Karabulut*, A. Gll**, A.Glda**; * Hacettepe
1e, Gennaro Gentile 1f, Giuseppe Nasti 1,2g; 1-Institute for Mahmoud S Soliman 1a, Ehab A El-Danaf 1b, Mohammad J Al-
University Ankara Chamber of Industry 1.OSB Vocational
Polymers Composites and Biomaterials (IPCB) - National Suwinea 1c; 1-Mechanical Engineering Department, King Saud
School, Sincan, Ankara, **Gazi University, Faculty of
Miss. Aye Nur ACAR; ukurova University, Adana, Trkiye Research Council (CNR) Via Campi Flegrei 34, 80078 University, P. O. Box800,
Technology, Manufacturing Engineering Department,
Pozzuoli, Italy, 2-Department of Chemcal Engineering, Riyadh 11421, Saudi Arabia
Ankara
Materials and Industrial Production, University of Neaples
Piazzale Tecchio 80, 80125 Napoli, Italy
Fabrication of novel green flame retardant SIMULATION AND MODELING OF SINTERING PROCESS NUMERICAL SIMULATION OF TRANSIENT 3-D

www.ampt2014.com
Microstructural evaluation and tensile properties of Cd
nanocomposite for interior wallpanels in aircraft FOR 316L STAINLESS STEEL METAL INJECTION TEMPERATURE AND KERF FORMATION IN LASER
Advances in Materials & Processing Technology Conference

added Al-15Mg2Si-3Cu composite


applications MOLDING PARTS FUSION CUTTING
Paper ID: 570
Paper ID: 729 Paper ID: 354 Paper ID: 706
9:45 10:00
K.A.D.D. Kuruppua, Rohini M. de Silvab, and K. M. Nalin de
M. Sadeghian Jahromi 1a, M. Emamy 1b, and A. Akrami 1c; Karim Kheloufia, and El Hachemi Amara; Centre of
Silvaa, a-Sri Lanka Institute of Nanotechnology,
1-School of Metallurgy and Materials, University of Tehran, Development of advanced Technologies (CDTA), Baba
Nanotechnology & Science Park, Mahenwatte, Pitipana, Barrire Thierry; Femto-st Institute, Besanon, France
Tehran, Iran Hassen, Algiers, Algeria
Homagama, Sri Lanka, b-Department of Chemistry, Faculty
of Science, University of Colombo, Colombo 03, Sri Lanka.
Influences of Contact Pressure, Sliding Velocity, Intelligent modeling and multi-objective optimization
Preparation and characterization of CuInS2 compound
New material based on hydrolyzed and grafted starch Lubricant, Bending Angle and Surface Texture on Friction of powder mixed electrical discharge diamond
for photovoltaic applications
Behaviors in Stainless Steel Strip Drawing grinding of MMC
Paper ID: 460
Paper ID: 735
Paper ID: 393 Paper ID: 718
Pramote Koowattanasuchat 1a, Numpon Mahayotsanun 1b ,
10:00 10:15
Sasawat Mahabunphachai 2c, and Kuniaki Dohda 3d; 1-
W. Rezaki 1,2, F. Chaffar Akkari 3, M. Kanzari 3, and A.
Department of Mechanical Engineering, Faculty of Engineering, Ashvarya Agrawala, Avanish Kumar Dubeyb*, and Pankaj
Amara 2; 1-Ecole Prparatoire aux Sciences & Techniques -
Khon Kaen University, 123 Mittraphap Road, Nai-Muang, Kumar Shrivastavac; a-Atmiya University, Gujrat, India, b-
Annaba, ALGERIE, 2-Laboratoire dEtude et de Recherches A. Serier 1*, and D. Aoufi 1; 1*-laboratory of coating,
Muang District, Khon Kaen 40002 Thailand, 2-National Metal Motilal Nehru National Institute of Technology, Allahabad-
des Etats Condenss (LEREC), Universit Badji Mokhtar - materials and environment, University mhamed Bougara,
and Materials Technology Center (MTEC), 114 Thailand 211004, Uttar Pradesh, India, c-AKS University, Satna-
Annaba, ALGERIE, 3-Laboratoire de Photovoltaque et Boumerdes, Algeria
Science Park, Phahonyothin Road, Klong 1, Klong Luang, 485001, Madhya Pradesh, India
Matriaux Semi-conducteurs (LPMS),
Phathumthani 12120 Thailand, 3-Department of Mechanical
Ecole Nationale dIngnieurs de Tunis, TUNISIE.
Engineering, Northwestern University, 2145 Sheridan Road,
Evanston, IL 60208-3111 USA
10:15 10:30 Beake

17
Professional Program Day 2 (November 18, 2014)

Session Title Characterization of Alloyed and heat treated materials Advanced Materials Shaping and froming Modeling, Optimization and Analysis

Charmin:
TBD TBD TBD TBD
Co-Charmin:

Effect of the Reactive Ball Milling Time and


Effect of different compaction and sintering conditions
Nanocatalysts on the Thermal Stability and An Automatic System for Deciding Bend Sequence of A Parametric study of Radial tool actuation in Orbital
on the thermo-mechanical properties of bulk
Hydrogenation/Dehydrogenation Properties of MgH2 Bending Parts EDM
aluminum produced using mechanical alloying
Nanocrystalline Powders
Paper ID: 479 Paper ID: 720
Paper ID: 741
Paper ID: 496

10:30 10:45
Deepak Panghal 1a, S.Kashid 2b, H.M.A.Hussein 3c, and
Muneer Baiga, Asiful H. Seikha, Hany Ammarb, Jabair A. M. Sherif El-Eskandaranya, H. Al-Matrouk, and Ehab Shaban Shailendra Kumar 4d; 1-Department of Fashion Technology, Sudhanshhu Kumar 1a, Harshit K. Dave 1b*, and Keyur P.
Mohammada, and Mohammad A. Alama; a-AMI-CEREM, and Ahmed Al-Duweesh; Nanotechnology and Advanced NIFT, New Delhi, 2,4-Department of Mechanical Engineering, Desai 1c; 1-Department of Mechanical Engineering, S. V.
King Saud University, Riyadh, Saudi Arabia, b-Suez Materials Program, Energy and Building Research Center, S. V. National Institute of Technology, Surat, India, 3- National Institute of Technology, Surat-395007, Gujarat,
University, Suez, Egypt. Kuwait Institute for Scientific Research, Safat 13109, Advanced Manufacturing Institute, King Saud University, India
Kuwait - State of Kuwait Riyadh 11421, Saudi Arabia

Effect of nano sized SiC content on the tribological


Tribological behaviours of chopped bamboo reinforced Validation of processing map for hot forging of Mg-3Sn- Prediction of life of deep drawing die using artificial
behavior of Al/SiC/2vol.%Gr hybrid composites
epoxy composites 2Ca-0.4Al alloy by physical and analytical modeling neural network
processed via mechanical milling
Paper ID: 503 Paper ID: 481 Paper ID: 35
Paper ID: 168

K.P. Rao 1a*, K. Suresh 1a, Y.V.R.K. Prasad 2b, N. Hort 3c,
10:45 11:00 and K.U. Kainer 3c ; 1-Department of Mechanical and
V. Naranje 1a, S. Kumar 2b, S.Kashid 3c, A. Ghodke 4d,
Biomedical Engineering, City University of Hong Kong, Tat
H.M.A.Hussein5; 1,4-Department of Technology S.P. Pune
Neslihan zsoya, Murat zsoyb, and Abdullah Mimaroluc; Chee Avenue, Kowloon, Hong Kong, 2-processingmaps.com,
Farshad Akhlaghi; School of Metallurgy and Materials University, Ganeshkhind, Pune, India, 2,4-Department of
*Sakarya University, Faculty of Engineering, Mechanical No. 2/B, Vinayaka Nagar, Hebbal, Bengaluru 560024, India,
Engineering, University College of Engineering, University of Mechanical Engineering, S.V. National Institute of
Engineering Department, Esentepe, SAKARYA (formerly with City University of Hong Kong), 3-Helmholtz-
Tehran, Tehran, Iran Technology, Surat, India,5Assistant Professor, Advanced
Zentrum Geesthacht, Institute of Materials Research,
Manufacturing Institute, King Saud University, Riyadh
Magnesium Innovation Centre, Max-Planck-Strae 1,
11421, Saudi Arabia
Geesthacht 21502, Germany

www.ampt2014.com
Comparison of mechanical chracteristics of chopped Mapping the cutting tool temperature distribution
Effect of Magnesium and Solution Heat Treatment To
bamboo and chopped coconut shell reinforced epoxy COLD SHIELD PRODUCTION BY ELECTROFORMING using computational fluid dynamic modeling based
Produce High Strength Al-10.5Si-3.4Cu Alloy
matrix composite materials approach
Paper ID: 500
Paper ID: 195
Paper ID: 504 Paper ID: 189

Salman Pervaiz 1a, Ibrahim Deiab 2b, Essam Moustafa


11:00 11:15 Wahba 3,4 c , Amir Rashid 1d, and Mihai Nicolescu 1e; 1-
S.G. Shabestari 1a, and M. Abdi 2b; 1,2-Center of Department of Production Engineering, KTH Royal Institute
Excellence for High Strength Alloys Technology (CEHSAT), Neslihan zsoya, Murat zsoyb, and Abdullah Mimaroluc; Burcu ARSLAN 1a , Gkhan DEMRC 2b, shak KARAKAYA 1c, of Technology, Stockholm, Sweden, 2-School of
School of Metallurgy and Materials Engineering, Iran *Sakarya University, Faculty of Engineering, Mechanical and Metehan ERDOAN 4d; 1-Middle East Technical Engineering, University of Guelph, ON, Canada, 3-
University of Science and Technology (IUST), Narmak, Engineering Department, Esentepe, SAKARYA University, Turkey, 2-Aselsan Inc. MGEO Division, Turkey, 3- Department of Mechanical Engineering, American
16846, Tehran, Iran Yldrm Beyazt University, Turkey. University of Sharjah, Sharjah, UAE, 4-Mechanical
Engineering Department, Faculty of Engineering, Alexandria
University, Egypt.

18
Professional Program Day 2 (November 18, 2014)
An investigation into high temperature tensile An Experimental Study on the Influence of Tool path,
Microstructural Evaluation of Laser Welded 316L Steel Investigation on the effect of Tool motion strategies
behavior of hot-extruded Al15wt%Mg2Si composite Tool diameter and Pitch in Single Point Incremental
Plates in EDM on Surface Quality
with Cu-P addition Forming (SPIF)
Paper ID: 742 Paper ID: 719
Paper ID: 402 Paper ID: 525
11:15 11:30
Adesina Akeem Yusuf*, Iyad T. AlZaharnah, Bekir Samir Rahul Jagtap 1a, Sachin Kashid 2b, and Shailendra Kumar 3c; Vishal J. Mathai 1a, Harshit K. Dave 1b, and Keyur P. Desai
F. Fatemi-Jahromi 1a, and M. Emamy 1b; 1-University of
Yilbas; Department of Mechanical Engineering, King Fahd 1,2-Research Scholar, Department of Mechanical Engineering, 1c; 1-Department of Mechanical Engineering, S. V.
Tehran, College of Engineering, School of Metallurgy and
University of Petroleum & Minerals, SVNIT, Surat, India, 3-Department of Mechanical Engineering, National Institute of Technology, Surat 395007, Gujarat,
Materials, Tehran, Iran
Dhahran 31261, Saudi Arabia SVNIT, Surat, India India
Optimization of material remove rate based on
Study of metadynamic recrystallization behaviors in a Repetitive flow forming of wood impregnated with
Optical properties of Fe doped TiO2 nanotubes surface roughness quality using two stage response

www.ampt2014.com
typical nickel-based superalloy thermoplastic binder
surface methods
Advances in Materials & Processing Technology Conference

Paper ID: 571


Paper ID: 253 Paper ID: 548
Paper ID: 346
11:30 11:45
Pournami Vijayan P 1a, Marykutty Thomas 2b, K.C. George
3c; 1-Research Scholar, Department of physics,
Xiao-Min Chen 1, Y.C. Lin 2, Dong-Xu Wen 3, and Ming- Masako Sekia, Tsunehisa Mikib, Soichi Tanakac, Ichinori Amin Poursafar 1a, Abbas Amrollahi 1b, and Hamed
S.B.College, Changanacherry, Kerala 686101, India, 2-
Song Chen 1; 1-School of Mechanical and Electrical Shigematsud, and Kozo Kanayamae; Advanced Industrial Barghikar 1c; 1-Islamic Azad university, Dehaghan Branch,
Associate Professor, Department of physics, B.C.M College,
Engineering, Central South University, Changsha 410083, Science and Technology, Anagahora, Shimo-Shidami, Department of Mechanical Engineering, Dehaghan, Isfahan,
Kottayam, Kerala 686001, India, 3-Associate Professor,
China, 2-State Key Laboratory of High Performance Moriyama-ku, Nagoya, Aichi, Japan Iran
Department of physics, S.B.College, Changanacherry,
Complex Manufacturing, Changsha 410083, China
Kerala 686101,India
11:45 13:00 Lunch
13:00 13:45 Keynote
13:45 14:00 Break
Session Title Characterization of Alloyed and heat treated materials Advanced Materials Shaping and froming Modeling, Optimization and Analysis
Charmin:
TBD TBD TBD TBD
Co-Charmin:
Effect of different heat treatment conditions on Optimisation of Electro Discharged Machining
Viscoelastic and Flexural Properties of Epoxy/Alumina Cold rolling and annealing behavior of 17% ferritic
microstructural and mechanical behavior of AZ63 Parameters for Titanium Alloy 6-4 Using Taguchi
Polymer Nanocomposites stainless steel
magnesium alloy Method
Paper ID: 611 Paper ID: 625
Paper ID: 480 Paper ID: 679
14:00 14:15
R.Ghani 1a, B.T. H. T. Baharudin *2b, Z. Leman 2c, and S.
A. Incesu 1a, and A. Gungor 2b; 1-Iron and Steel Insttute, Sulaiman 2d; 1-Faculty of Engineering, Universiti Malaysia
Veerabhadrayya Hiremath 1a, Dharmendra Kumar Shukla
Karabuk University, Karabuk, Turkey, 2-Metallurgical and Pahang, 26600 Gambang, Pahang, Malaysia, 2-
2b; 1,2 Department of Mechanical Engineering, Motilal Hadjia M, Sahraouia T, Haddada A., Belkacema L., and Hadjia
Materials Engineering Department, Karabuk University, Department of Mechanical and Manufacturing Engineering,
Nehru National Institute of Technology Allahabad-211004 Y.; University of Blida 1, Route de Soumaa, Blida , Algeria
Karabuk, Turkey Universiti Putra Malaysia, 43400 Serdang, Selangor,
India
Malaysia.

19
Professional Program Day 2 (November 18, 2014)

Characterization and Tribological Performance of TiB2 THE POROSITY EFFECT ON CMAS DIFFUSION INTO THE DEVELOPMENT OF SHEET ROLLING SIMPLE Parametric analysis, modeling and optimization of
Reinforced Al-Al12Si MMCs THERMAL BARRIER COATINGS MODELS surface roughness during EDAG using CBN abrasive

Paper ID: 312 Paper ID: 712 Paper ID: 69 Paper ID: 717

14:15 14:30

Federico Bartolezzi 1,2, Onur Tazegul 1, Faiz Muhaffel 1,


Brian T. M. Ong, Pin Lu, Lu Shen, Jisheng Pan, and Shijie Pankaj Kumar Shrivastavaa, and Avanish Kumar Dubeyb*;
Marcello Cabibbo 2, and Huseyin Cimenoglu 1*; 1-
Wang; Institute of Materials Research and Engineering, M. Zaaf, A. Mebarek, and A. Lemoui, S. Chabour; Laboratoire a-AKS University, Satna-485001, Madhya Pradesh, India,
Department of Metallurgical and Materials Engineering,
A*STAR (Agency for Science, Technology and Research), de Mise en Forme des Matriaux Mtalliques (LMF2M), Annaba b-Motilal Nehru National Institute of Technology, Allahabad-
Istanbul Technical University, Istanbul, Turkey, 2-
Singapore University, Algeria 211004, Uttar Pradesh, India
Department of Mechanical Engineering, Marche Polytechnic
University, Ancona, Italy

Effects Evaluation for Different Rare Earth Elements in MOS Memory using 2-nm Silicon Nanoparticles Charge PROCESS PARAMETERS FOR CYLINDRICAL DEEP Optimizing of Machining Parameters of Plastic
Magnesium-lithium Alloy Trapping Layer DRAWING COMPONENTS Material Using Taguchi Method

Paper ID: 645 Paper ID: 727 Paper ID: 209 Paper ID: 17

Nazek El-Atab 1a, Ayman Rizk 1b, Burak Tekcan 2c, Sabri
Alkis 2,3d, Ali K. Okyay 2,3,4e, and Ammar Nayfeh 1f; 1-
14:30 14:45 Institute Center for Microsystems iMicro, Department of
J. Abdul Shukor 1a, S. Said 1b, R. Harun 1c, S. Husin 2d,
Electrical Engineering and Computer Science (EECS),
ZHANG Xingmeia, JI Guodongb, and WU Ruizhic*; Key S.Sulaiman 1, Z.Leman 2, B.T.H.T. Baharudin 3, M.K.A. Ariffin Ab. Kadir 1e; 1-Universiti Kuala Lumpur Malaysian Spanish
Masdar Institute of Science and Technology Abu Dhabi,
Laboratory of Superlight Materials & Surface Technology 4, and Shamsudin Man 5; Department of Mechanical and Institute, Kulim Hi-Tech Park, 09000 Kulim, Kedah
United Arab Emirates, 2-UNAM-National Nanotechnology
(Harbin Engineering University), Ministry of Education, Manufacturing Engineering, Universiti Putra Malaysia, 43400 MALAYSIA, 2-TNB Research Sdn. Bhd. Kajang, Selangor
Research Center. Bilkent University, 06800 Ankara, Turkey,
Harbin 150001, P.R. China UPM Serdang Selangor, MALAYSIA Darul Ehsan, MALAYSIA
3-Department of Electrical and Electronics Engineering,
Bilkent University, 06800 Ankara, Turkey, 4-Institute of
Materials Science and Nanotechnology, Bilkent University,
06800 Ankara, Turkey

www.ampt2014.com
Surface nanocrystalline and hardening effects of The Microstructural Revolution of Al-10%Al3Mg2 SPRING-BACK IN MULTI-POINT DISCRETE DIE V- Advanced Modeling and Numerical Simulation of
TiAlV alloy by electropulsing ultrasonic shock Nanocomposite During Mechanical Milling BENDING Ductile Damage in Metal Forming Processes

Paper ID: 708 Paper ID: 606 Paper ID: 160 Paper ID: 72

14:45 15:00

Xiaoxin Ye a,b, and Guoyi Tang a,b; a-Advanced Materials


Institute, Graduate School at Shenzhen, Tsinghua M.R. Abusrea 1a, M. Shazly 2b, A. Elmokadem 3c, A.S. Wifi Khemais Saanouni, Houssem Badreddine, and Carl
H. Ramezanalizadeh*, and M. Emamy; School of
University, Shenzhen 518055, PR China, b-Key Laboratory 4d; 1, 3, 4-Mechanical Design and Production Dept., Faculty of Labergre; ICD/LASMIS, STMR UMR 6281 of CNRS,
Metallurgy and Materials, College of Engineering, University
for Advanced Materials of Ministry of Education, Engineering, Cairo University, Egypt, 2- Faculty of Engineering, University of Technology of Troyes, 12 Rue Marie Curie,
of Tehran, P.O. Box 14395-731, Tehran, Iran
Department of Materials Science and Engineering, Tsinghua The British University in Egypt, Egypt CS 42060, 10004 Troyes Cedex, France
University, Beijing 100084, PR China

20
Professional Program Day 2 (November 18, 2014)
Effect of Shielding Gas on the Properties and Seed layer effect on the (002) texture and
A Finite Element Investigation into the Spring Shock
Microstructure of melted steel surface using a TIG piezoelectric properties of pulsed-DC sputtered AlN Parametric Study on Cylindrical Roller Forming Process
Absorber for Bicycle
Torch thin films
Paper ID: 678
Paper ID: 75
Paper ID: 728 Paper ID: 454
15:00 15:15
M. Hasheminiasari a, J. Lin b, J. A. Scales c, and J. J. Moore
b; a-School of Metallurgy and Materials Engineering, Iran Dyi-Cheng Chen 1*, Shih-Hung Kao 1, Chen-Kun Huang 1,
P. Muoz-Escalonaa, S. Mridhab,and T.N. Bakerc; Shakil A. Kagzi 1a, and Harit K. Raval 1b; 1-Sardar Vallabhbhai
University of Science and Technology (IUST), Tehran, Iran, Yi-Ting Lai 1, and Chia-Yu Liu 1; 1-Department of Industrial
Department of Mechanical and Aerospace Engineering, National Institute of Technology, Ichchhanath, Surat-395007,
b-Department of Metallurgical and Materials Engineering, Education and Technology, National Changhua University
University of Strathclyde, Glasgow, G1 1XJ, UK India
Colorado School of Mines, Golden, CO, USA, c-Department of Education, Changhua 500, Taiwan
of Physics, Colorado School of Mines, Golden, CO, USA

www.ampt2014.com
Advances in Materials & Processing Technology Conference

15:15 15:30 Break


Session Title Characterization of Alloyed and heat treated materials Advanced Processing Shaping and froming Modeling, Optimization and Analysis
Charmin:
TBD TBD TBD TBD
Co-Charmin:
CHARACTERISATION OF STAINLESS STEEL
A STUDY ON THE FABRICATION OF OXIDE POWDER Formation of a square tube having a middle circular 3D numerical models of FSW processes with non-
COATINGSDEPOSITED BY THE THERMAL
FROM FE-46NI/77NI ALLOY SCRAPS section for axial crushing cylindrical pin
EVAPORATION PROCESS
Paper ID: 125 Paper ID: 722 Paper ID: 76
Paper ID: 32
15:30 15:45
P. Bussetta 1a, N. Dialami 2b, M. Chiumenti 2c, C. Agelet
Jung-Yeul Yun 1, Dong-Won Lee 2, Shun-Myung Shin 3, Jei-
C. J. Tan 1, 2; 1-Department of Mechanical Engineering, de Saracibar 2d, M. Cervera 2e, and J.-P. Ponthot 1f; 1-
Pil Wang 4; 1-Powder Technology Research Group, Korea
Faculty of Engineering, University of Malaya, 50603 Kuala University of Liege, Department of Aerospace &
Institute of Materials Science, Korea, 2-Titanium N. MERAKEB; Metallurgy and Materials Engineering
Lumpur, Malaysia, 2-Centre of Advanced Manufacturing and Mechanical Engineering, Non Linear Computational
Department, Korea Institute of Materials Science, Korea, 3- Laboratory, Sciences Engineer Faculty, Badji Mokhtar,
Material Processing (AMMP Centre), Level 8, Engineering Mechanics, Building B52/3, Chemin des Chevreuils, 1; B-
Extractive Metallurgy Group, Korea Institute of Geoscience Annaba - University, P.O. Box 12, 23000, Algeria
Tower, Faculty of Engineering, University of Malaya, 50603 4000 Liege, Belgium, 2-International Centre for Numerical
& Mineral Resources, Korea, 4-Department of Metallurgical
Kuala Lumpur, Malaysia Methods in Engineering (CIMNE), Universidad Politcnica de
Engineering, Pukyong National University, Korea
Catalua, Campus Norte UPC, 08034 Barcelona, Spain
Novel Polishing Method of Glass Materials under Ultra-
The effects of Cu addition and solutionizing heat
low Pressure Conditions Considering Stick-slip Experimental Design Study of an Electroactive Polymer Heuristic optimization of cooling channel design in the
treatment on the microstructure and wear properties
Phenomena with a Five-axes Closed-Link Compact Enhanced with Graphene hot stamping die for hot stamping process
of hot-extruded Al-Mg2Si eutectic alloy
Robot and Fine
Paper ID: 725 Paper ID: 84
Paper ID: 547
Paper ID: 136
15:45 16:00 Wei Wu 1a, Yudong Liu 2b, Toshiki Hirogaki 3c, and Eiichi
Aoyama 4d; 1-Graduate School of Science and
Engineering, Doshisha University, 1-3 Tataramiyakodani, Hatem Abuhimd 1a, Curdin Bachler 2b, and Gabor Kovacs 2c; Mohd Fawzi Zamri 1a, and Ahmad Razlan Yusoff 2b; 1-
H. Majdi 1a, A. Razaghian 1b, M. Emamy 2c, N. Motallebi Kyoutanabe-shi, Kyoto 610-0394, Japan, 2-Doshisha 1-National Nanotechnology Center, King Abdulaziz City for Faculty of Manufacturing Engineering, University Malaysia
1d; 1-Imam Khomeini International University, Qazvin, Iran, University Graduate Student of Engineering, 1-3 Science and Technology. P.O Box 6086, Riyadh 11442, Saudi Pahang, 26600, Pekan, Pahang, Malaysia, 2-Faculty of
2-School of Metallurgy and Materials, University of Tehran, Tataramiyakodani, Kyoutanabe-shi, Kyoto 610-0394, Arabia, 2-Empa, Swiss Federal Laboratories for Materials Mechanical Engineering, University Malaysia Pahang,
Tehran, Iran Japan Science and Technology. berlandstrasse 129, 8600 26600, Pekan, Pahang, Malaysia
3,4Faculty of Science and Engineering, Doshisha University, Dbendorf, Switzerland
1-3 Tataramiyakodani, Kyoutanabe-shi, Kyoto 610-0394,
Japan

21
Professional Program Day 2 (November 18, 2014)

Track 3: Manufacturing Processes


Session Title
Powder Metallurgy and Bonding
Continue Continue Continue
Charmin:
TBD
Co-Charmin:

IMPACT OF DIFFERENT HEAT TREATMENT ELECTRODEPOSITION AND CORROSION BEHAVIOR SLAB ANALYSIS, FEM SIMULATION AND
Formation of Nanocrystalline Fe-Ni Alloys powders by
TECHNIQUES ON MICROSTRUCTURE OF A USED OF Zn-Co COATING PRODUCED FROM A SULFATE EXPERIMENTAL VERIFICATION ON ROTATING
Mechanical alloying Method
NICKEL-BASE SUPERALLOY BLADE BATH FORGING OF THREE-LAYER CLAD CYLINDER
Paper ID: 207
Paper ID: 736 Paper ID: 137 Paper ID: 89

N. Boudinar 1, A. Djekoun 1, A. Otmani 1, B. Bouzabata 1, J.


16:00 16:15 M. Greneche 2, K. Tiabi 3; 1-Laboratoire de Magntisme et de
Spectroscopie des Solides, Universit Badji Mokhtar, Facult Gow-Yi Tzou 1, You-Min Huang 2, and Shih-Hsien Lin 3; 1-
des sciences B. P: 12 (23000) ANNABA Algrie, Ecole Department of Mechanical and Automation Engineering,
Alaaeldin H. Mustafa 1, Shouwen Shen 2, Gasan Alabedi 2,
A. Kahoul, F. Azizi; Laboratory of Energetics and Prparatoire aux Science et Technique, ANNABA Algrie, 2- Kao-Yuan University, Lujhu District, Kaohsiung, 821,
and Ihsan Al-Taie 2; 1-Mechanical Services Shops
Electrochemistry of Solids, Department of Engineering Laboratoire de Physique de lEtat Condens, UMR CNRS 6087 Taiwan, 2-Department of Mechanical and Engineering,
Department, Saudi Aramco, Saudi Arabia, 2-Research &
Process, University F. Abbas Stif-1, Stif, Algeria Universit du Maine, Facult des Sciences 72085 LEMANS National Taiwan University of Science and Technology,
development Center, Saudi Aramco, Saudi Arabia
Cedex 9 France Taipei, 106, Taiwan, 3-Taiwan Association of Fasteners
3Laboratoire Sciences et de Gnie des Matriaux, Universit Industry Technology Development, Pingtung, 900, Taiwan
des Science et de la technologie Houari Boumediene, Facult
des Gnie mcanique et Gnie de Procds, Alger -Algrie

On the use of model alloys as a way to understand


Study of the influence of SiC and Al2O3 as EXPERIMENTAL AND NUMERICAL MODELLING AND
the effects of complex deformation conditions on
reinforcement elements in new design of elastomeric Capillary Casting of Iron-Based Alloys SIMULATION OF THE CREEP AGE FORMING OF
austenite microstructure evolution during hot metal
matrix composites AERONAUTIC PANELS AA7XXX ALUMINUM ALLOY
forming processes
Paper ID: 322
Paper ID: 170 Paper ID: 121
Paper ID: 739

16:15 16:30 Krzysztof Muszka 1a, Jakub Sroka 1b, Lin Sun 2c, Bradley
Wynne 3d, and Eric Palmiere 3e; 1-AGH University of F.C. Ribeiro 1a, B.T. Scarpin 1b, and G.F. Batalha 1c; 1-

www.ampt2014.com
Science and Technology, Faculty of Metals, Engineering and D. Zaimovaa,b*, E. Bayraktarb*, D. Katundib, and N. Laboratory of Manufacturing Engineering - Dep.
Industrial Computer Science, Mickiewicza 30, 30-059 Dishovskya; a-University of Chemical Technology and Mechatronics and Mechanical Systems Engineering
Daniela Spasova, Technical University of Varna, Varna, Bulgaria
Krakow, Poland, 2-Cambridge University, Department of Metallurgy, 8, Kliment Ohridski blvd., Sofia 1756, Bulgaria, b- Polytechnic School of Engineering of the University of Sao
Materials Science and Metallurgy, 27 Charles Babbage Rd, Supmeca -Paris, School of Mechanical and Manufacturing Paulo Av. Prof. Mello Moraes, 2231, Cidade Universitaria,
Cambridge CB3 0FS, United Kingdom, 3-The University of Engineering France 05508-030, Sao Paulo, Brazil.
Sheffield, Department of Materials Science and Engineering,
Mappin St. Sheffield S1 3JD, United Kingdom

22
Professional Program Day 2 (November 18, 2014)
The State of the Atomic Lattice of Structure Materials: Study of the Influence of Two Polymers on Asphalt Fabrication and Characterization of Mg-nano B4C and B Prediction of Hardness for Partially Quenched Boron
Pre NDE Indication Assessments Mixes Characteristics composites by powder metallurgy method Steel Using Quench Factor Analysis
Paper ID: 29 Paper ID: 152 Paper ID: 378 Paper ID: 310
16:30 16:45 J. Y. Choi 1a, J. H. Kim 1b, D. H. Ko 1c, P. K. Seo 2d, D. C.
Ko 3e, and B. M. Kim 4f; 1-Precision Manufacturing
Mustafa AYDIN 1a, Rait KO 2b, and Ali AKKOYUNLU 3c; 1- System Division, Pusan Natl Univ., Geumjeong-gu, Busan,
F. M. Al-Abbas 1a, F. A. Al-Hindas 1b, D. L. Olson 2c, and B. Khedoudja Soudani 1a, Samia Saoula 1b, Vronique Cerezo Dumlupinar University, Department of Mechanical Engineering, South Korea, 2-Production Department, Shinyoung co.
Mishra 2d; 1-Inspection Department, Saudi Aramco, 2c, and Smail Haddadi 1d; 1-USTHB, LEEGO Bp 32 el alia Ktahya, Turkey, 2,3-Southern Illinois University, Department LTD., Geumjeong-gu, Busan, South Korea, 3-Industrial
Dhahran, Saudi Arabia, 2-Colorado School of Mines, babezzouar, Alger algerie, 2-IFSTTAR, Route de Bouaye of Mechanical Engineering and Engineering Processes, Liaison Innovation Center, Pusan Natl Univ., Geumjeong-

www.ampt2014.com
Golden, Colorado, USA CS4 44344 BOUGUENAIS Cedex, France. Carbondale, IL, 62901, USA gu, Busan, South Korea, 4-School of Mechanical
Advances in Materials & Processing Technology Conference

Engineering, Pusan Natl Univ., Geumjeong-gu, Busan,


South Korea
Effects of initial phase on flow behaviors and
Influence of technological parameters on properties of Microstructure of Surface Layer of T1 and D2 Steels Artificial Intelligence Approach to Predict the
dynamically recrystallized grain size of a nickel-based
MOSFETs after Laser Melting Thickening in the Hydroforming Process
superalloy
Paper ID: 187 Paper ID: 487 Paper ID: 342
Paper ID: 467
16:45 17:00 O. Benzaoui 1,2a, and C. Azizi 3b; 1-Technology
Amirreza Yaghoobi 1a*, Abdolhamid Gorji 1b, Mohammad
Dong-Xu Wen 1,2, Y.C. Lin 1,2, and Xiao-Min Chen 1,2; 1- Department, Faculty of Technology, 20 August 1955 Vladimir Shtarbakov 1a, Tsanka Dikova 2b, Dimitar Stavrev
Bakhshi-Jooybari 1c, and Hamid Baseri 1d; 1-Department
School of Mechanical and Electrical Engineering, Central University, BP 26, Skikda 21000, Algeria, 2-Department of 3c; 1-Metal JSC, ZPZ, Varna, Bulgaria, 2-FDM, Medical
of Mechanical Engineering, Babol University of Technology,
South University, Changsha 410083, Physics, Faculty of Science, Constantine1 University, University of Varna, 55 M.Drinov Str, 9002 Varna, Bulgaria, 3-
Iran
China, 2-State Key Laboratory of High Performance Constantine 25000, Algeria, 3-Sciences Institute, Larbi Ben Technical University of Varna, 1 Studentska Str, 9010 Varna,
Complex Manufacturing, Changsha 410083, China Mhidi University, BP 358, Constantine Street, Oum El Bulgaria
Bouaghi 04000, Algeria

23
Professional Program Day 3 (November 19, 2014)

AMPT 2014

16- 20 November 2014


Day 3 (November 19, 2014)
Time

start End Track 1: Materials Characterization & Properties Track 2: Advanced Materials & Processes Track 4: Materials Machining Processes Track 5: Process Design, Modeling & Casting

8:00 8:45 Keynote

8:45 9:00 Break

Session Title Materials Testing and Mechanical Behavior Advanced Processing Machining, Optimization, & Analysis Computer based methods

Charmin:
TBD TBD TBD TBD
Co-Charmin:

Study on Influence of Process parameters in


Effect of electrolyte concentration on the surface Simulation of Autonomous PV-Diesel-Wind Hybrid
Experimental Comparison Between Two types of Incremental Forming using Finite Element
properties of nanoporous TiO2 layers formed on Power System With Storage Battery Using Homer
Hybrid Composite Materials in Compression test Simulations and Taguhi Orthogonal Array
micro-roughened titanium Software for Telecommunication Relay Antenna
Paper ID: 97 Paper ID: 161
Paper ID: 196 Paper ID: 348

Tuncay Dikici 1,2, Selim Demirci 2,4, and Mustafa Toparli


9:00 9:15 3,4; 1-Izmir Katip Celebi University, Department of
Suhad D. Salman 1,2a, W.S. Wan Hassim 1b, and Z. Leman
Materials Science and Engineering, Cigli 35620, zmir, Kurra Suresh 1*, Srinivasa Prakash Regalla 1, and Rogelio
1c; 1-Department of Mechanical and Manufacturing
Turkey, 2-Dokuz Eylul University, The Graduate School TAHRI Toufik 1a, BOUCHACHIA Mohamed, and BRAIKIA Prez-Santiago 2; 1-BITS-Pilani Hyderabad Campus,

www.ampt2014.com
Engineering, Faculty of Engineering,
of Natural and Applied Sciences, Buca 35160 Izmir, Ossama; 1-Laboratory of Electrical Engineering and Hyderabad, India - 500078, 2-Department of Engineering,
Universiti Putra Malaysia, 43400 Serdang, Selangor,
Turkey, 3-Dokuz Eylul University, Department of renewable Energy, Technology faculty, University of Chlef, ITESM, Campus Central de Veracruz, Crdoba, Mxico -
Malaysia, 2-Materials Engineering Department, Faculty of
Metallurgical and Materials Engineering, Buca 35160 Po Box 151 Chlef 02000, Algeria 94500
Engineering, University of Mustansiriyah,
Izmir, Turkey, 4-Dokuz Eylul University, Center for
Baghdad, Iraq.
Fabrication and Appl. of Electronic Materials (EMUM),
Buca 35160 Izmir, Turkey

24
Professional Program Day 3 (November 19, 2014)
Effect of solvent and processing condition on
DYNAMIC ANALYSIS AND FUZZY LOGIC BASED
Analytical Solution of Isothermal Fatigue Crack Growth structure and morphology of Aluminium Nitride Identification of constitutive laws for rubber materials:
CONTROL OF A CANTILEVER PIPE CONVEYING
in Solid Cylinder Nano powders fabricated by Electrical Explosion of A numerical study
FLUID
Wire (EEW)
Paper ID: 115 Paper ID: 397
Paper ID: 243
Paper ID: 204
9:15 9:30
M.A.Nasser 1a, S.T.Hasan 2b, and Syed A A Shah 3c; 1-
Board of Technical Education, Technical College, Baghdad,
F. Ayari a,b*, E. Bayraktar a, M. Boujelbne a; a-
Iraq, 2-Department of Engineering and Mathematics, Faculty
Mohammad Poorbakhshi Saeedsaraei, and Arman Supmeca/LISMMA - Paris, School of Mechanical and Mehmet Hakan Demir 1a, Faruk Yigit 1b; 1-Department
of Arts, Computing, Engineering and Sciences, Sheffield
Sedghi; Department of Material engineering, Imam Manufacturing Engineering, France, b-Laboratory of of Mechatronics at Yildiz Technical University, Istanbul,
Hallam University, City Campus, Howard Street, Sheffield S1
Khomeini International University, Qazvin, Iran Mechanics, College of Science & Technology, 1008 Turkey
1WB, United Kingdom, 3-Materials Engineering Research
Montfleury, Tunis, Tunisia
Institute, Sheffield Hallam University, City Campus, Howard
Street, Sheffield S1 1WB, United Kingdom

www.ampt2014.com
Advances in Materials & Processing Technology Conference

Unnotched Charpy Impact Energy-Temperature


Fuzzy Logic Modeling of Transparent and Elastic ANALYSIS METHOD AND EFFECT OF SOME
Transition Behaviour of Engineering Grade As-cast FINITE ELEMENT ANALYSIS OF POLYMERIC GEAR
Silicone Pad for a New and Novel Optic Based GEOMETRIC PARAMETERS ON OPERATING
Ferritic Ductile Irons Austempered at 250 C , 300 C, MESH STIFFNESS
Tactile CENTRIFUGAL PUMPS OPTIMIZATION
350 C and 400 C
Paper ID: 277
Paper ID: 259 Paper ID: 603
Paper ID: 212
Kodeeswaran 1a, R. Suresh 2b, and S. Senthilvelan 3c; 1-
9:30 9:45 Control Actuation Systems Group, Vikram Sarabhai Space
Centre, Thiruvananthapuram, Kerala, India, 695022, 2-
kr Ergin Ksakrek 1a, and Ahmet zel 2b; 1-Faculty of M. Benturki, R. Dizene, and A.M. Atif; Department of
Structural Analysis and Testing Group, Vikram Sarabhai
Engineering, Istanbul University, 34320 Avclar, Istanbul, A. Krl 1a, and U. Bykahin 2b; 1,2-Department of Engineering Design and Manufacture, Faculty of Mechanical
Space Centre, Thiruvananthapuram, Kerala, India,
Turkey, 2-Faculty of Engineering, Sakarya University, 54187 Mechatronics, Yildiz Technical University, Istanbul, Turkey Engineering, University of Sciences and Technology Houari
695022, 3-Department of Mechanical Engineering, Indian
Serdivan, Sakarya,Turkey Boumediene (USTHB)
Institute of Technology Guwahati, Guwahati, Assam,
India, 781039
Enhancement of Conventional WC-Co and Inconel
Distribution of the electric field according to the Modelling the failure behavior of magnesium alloy
625 HVOF thermal spray coatings by the addition CAD system for automatic modeling of compound
evolution of the discharge in a system point plane with sheetforming at warm temperatures by using new
of nano-structured WC-Co for Wear/Corrosion dies
insulating barrier hybrid ICA-ANFIS model
Applications in the Oil/Gas
Paper ID: 281
Paper ID: 703 Paper ID: 738
Paper ID: 153
A.A. Al-Hamed 2, K. Y. Benyounis 2, H.Y. Al-Fadhli 3,
9:45 10:00 B.S. Yilbas 4, M.S.J. Hashmi 1,2, and J. Stokes 1,2; 1-
National Centre for Plasma Science and Technology,
S. Benharat 1, and S. Bouazabia 2; Laboratory of the 2- School of Mechanical and Manufacturing Engineering, Sachin Kashid 1a, Deepak Panghal 2b, and Shailendra
M. Belali-Owsia*, A. H. Gorji, and M. Bakhshi; * Department
Electric and Industrial Systems, Faculty of electronics and Dublin City University, Glasnevin, Dublin 9, Ireland , 3- Kumar 3c; 1,2,3-Department of Mechanical Engineering,
of Mechanical Engineering, Babol Noshirvani University of
Informatics, USTHB Algeria. Non-Metallic and Protective Coating Unit, Consulting S. V. National Institute of Technology, Surat, India
Technology, Babol, Iran
Services Department, Saudi Aramco Dhahran, Saudi
Arabia, 4- Mechanical Engineering Department, King Fahd
University of Petroleum and Minerals, Dhahran, Saudi
Arabia

25
Professional Program Day 3 (November 19, 2014)

Deformation Mechanism of Harmonic Structure A new method for synthesis of cordierite nano Optimization and Prediction Approaches for Flexible FINITE ELEMENT ANALYSIS ON A COMPOSITE
Designed Co-Cr-Mo Alloy powder Routing in Dynamic Environment FMS CURVED PIPE UNDER IN-PLANE LOADING

Paper ID: 241 Paper ID: 271 Paper ID: 323 Paper ID: 358

10:00 10:15
Osamu Yamaguchi 1a, Sanjay Kumar Vajpai 2b, and Kei
Ameyama 3c; 1-Graduate school of Science and Arman Sedghi, Aida Rahmani, and Zeinab Moradi; Jaber Abu Qudeiri 1a, Usama Umer 1b, Fayiz Abu Khadra 2c,
A. A. Khalid; Department of Mechanical Engineering,
Engineering, Ritsumeikan University,Japan, 2-Ritsumeikan Materials Engineering Department, Imam Khomeini and Hussein Hussein 1d; 1-Advanced Manufacturing
Faculty of Engineering, Institut Teknologi Brunei, Brunei
Research Organization of Science and Technology, Japan, 3- International University, Qazvin 34149-16818, Iran Institute, King Saud University, Saudi Arabia, 2-Faculty of
Faculty of Science and Engineering, Ritsumeikan University, Engineering, King Abdulaziz University, Saudi Arabia
Japan

10:15 10:30 Beake

Session Title Materials Testing and Mechanical Behavior Advanced Processing Machining Tools and their analysis Computer based methods

Charmin:
TBD TBD TBD TBD
Co-Charmin:

Investigation of the Electro-Chemical Corrosion of


Galling Resistance of Cold Work Tool Steel under Force parameters and experimental characterization in CFD Analysis of an Accumulator Head for Quick
Laser Melted Layers of Stainless Steel in Artificial
Heat Generation during Stamping fine-blanking process Material/Color Change
Saliva
Paper ID: 272 Paper ID: 23 Paper ID: 526
Paper ID: 261

www.ampt2014.com
10:30 10:45 Guang Jin 1, a, Hong-Seok Choi 2b, Seung-Hun Cha 3c,
Byung-Min Kim 4d, and Dae-Cheol Ko 1,4e; 1-Green
Transportation System of Industrial Liaison Innovation
Tsanka Dikova 1a, Diana Tsaneva 2b, Mariana Ilieva 2c, Tolga PIRASACI 1a, Metin U. SALAMCI 1b, and Murat
Center, Pusan National University, Busan, 609-735, Majid Elyasi; Faculty of Mechanical Engineering, Babol
Natalina Panova 1d, and Bistra Galunska 1e; 1-Medical OZADAM 2c; 1-Departmet of Mechanical Engineering,
South Korea, 2-Precision Manufacturing Systems Noshirvani University of Technology, P.O. Box 484, Babol,
University Prof. D-r P. Stoyanov, 55 Marin Drinov Str., Gazi University, Ankara/TURKEY, 2-Ozler Plastik PLC,
Division, Pusan National University, Busan, 609-735, Mazandaran, Iran
9002 Varna, Bulgaria, 2-"Angel Kanchev University of Ruse, Istanbul TURKEY
South Korea, 3-Technical Research Institute, Shinyoung
8 Studentska Str., POB 7017, Ruse, Bulgaria
Co. Ltd., Gyeongsangbukdo, 770-150, South Korea, 4-
School of Mechanical Engineering, Pusan National
University, Busan, 609-735, South Korea

26
Professional Program Day 3 (November 19, 2014)
Fabrication and analysis of complex shape tool for
Flexural Behaviour of Carbon Fiber Reinforced Surface Modification of Titanium Alloy Ti6Al4V DEVELOPMENT OF THE CUSTOMIZED IMPLANT
Electric discharge machining (EDM) by Abrasive water
Aluminium Foam Cored Sandwiches Using Laser Assisted Micro Milling SYSTEM USING CAD/CAM/CAE TOOLS
jet machining (AWJM)
Paper ID: 147 Paper ID: 298 Paper ID: 588
Paper ID: 157
10:45 11:00
Z. Mohid 1a, N.M. Warap 1b, M.R. Ibrahim 1c, and E.A. Vijay Kumar Pal 1*, S.K. Choudhury 2; 1-Research scholar,
Halil Aykul 1a, Emre Kara 1, Ali Kurun 1, Mustafa Reit Rahim 1d.; 1-Advanced Machining Research Group, Department of Mechanical Engineering, Indian Institute of D. A. Bircan 1, D. Dede 1, and, A. K. Eki 1; 1-ukurova
Habolu 1, and Ahmet ini 1; 1-Hitit University, Department Faculty of Mechanical and Manufacturing Engineering, Technology Kan-pur, 208016, 2-Department of Mechanical University, Mechanical Engineering Depth., 01330 Balcal,
of Mechanical Engineering, orum, Turkey Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Engineering, Indian Institute of Technology Kanpur, 208016, Adana, TRKYE
Batu Pahat, Johor, Malaysia

www.ampt2014.com
A finite element based energy consumption analysis
Advances in Materials & Processing Technology Conference

A Study on Tensile Shear Strength of IN 718 Welded Analysis of surface roughness of sapphire wafer Effects of Diamond Coated Tools in Micro-drilling of
for machining AISI 1045 carbon steel using
Joint after polishing by chemical mechanical polishing CFRP Plates Using a High-speed Spindle
uncoated carbide tool
Paper ID: 440 Paper ID: 367 Paper ID: 159
Paper ID: 737
11:00 11:15
Keiji OGAWA 1a, Heisaburo NAKAGAWA 2b, Toshiki Salman Pervaiz 1a, Ibrahim Deiab 2b, Hossam Kishawy
Ho-Sung Leea*, Jong-Hoon Yoona, and Joon-Tae Yooa; Zone-Ching Lin 1a , Wei-Shuen Huang 1b, and Hao-Yang HIROGAKI 3c, and Eiichi AOYAMA 3d; 1-Ryukoku University, 3c; 1-Department of Production Engineering, KTH Royal
Advanced Materials and Structure Team, Korea Aerospace Ding 1c; 1-No.43, Sec. 4, Keelung Rd., Taipei 106, 1-5 Yokotani, Seta Oe-cho, Otsu, Shiga 520-2194, Japan, 2- Institute of Technology, Stockholm, Sweden, 2-School of
Research Institute, 45 Eoun-dong, Yuseong-gu, Daejeon Taiwan, Department of Mechanical Engineering, National Nakagawa Machining R&D Center, 974-1 Nakanoshima, Engineering, University of Guelph, ON, Canada, 3-Faculty
305-333, Korea Taiwan University of Science and Technology Wakayama 640-8392, Japan, 3-Doshisha University, 1-3 of Engineering and Applied Sciences, University of Ontario
Tataramiyakodani, Kyoutanabe-shi, Kyoto 610-0394, Japan Institute of Technology, Ontario, Canada
On the correlation between the contact nature at the
Multiaxial Fatigue Crack Path Prediction using Critical
Development of new biodegradable packaging tool-chip interface and the built-up-edge formation
Plane Concept A new fem approach for the determination of
process in machining
fracture parameters in a cracked material.
Paper ID: 413
Paper ID: 455
Paper ID: 308
11:15 11:30
M. Nouari 1*, S. Atlati 1, B. Haddag 1, A. Moufki 2; 1-
Khelil.foudil 1a, Belhouari.Mohamed 2b, Benhamena. ali
Lorraine University, Laboratoire dEnergtique et de
A. Serier 1*, and D. Aoufi 1; 1*-laboratory of coating, 1c, Benaoum Fatima 3c ,Aour.benoumer 3d; 1-
Jafar Albinmousa; Mechanical Engineering Department, King Mcanique Thorique et Applique, LEMTA CNRS-UMR 7563,
materials and environment, University mhamed Laboratoire LPQ3M, Universit de Mascara, B.P 305,
Fahd University of Petroleum & Minerals, Dhahran GIP-InSIC, 27 rue dHellieule, 88100 Saint-Di-des-Vosges,
Bougara, Boumerdes, Algeria Mascara, 29000, Algeria, 2-Laboratoire de Biomcanique
31261, Saudi Arabia France, 2-Lorraine University, Laboratoire dEtude des
Applique et BiomatriauxEcole Nationale Polytechnique
Microstructures et de Mcanique des Matriaux, LEM3, UMR
d'Oran BP 1523 El Mnaour, Oran 31000, Algrie
CNRS 7239, Metz, France

27
Professional Program Day 3 (November 19, 2014)

Influence of Ball Screw Equipped with Counter-balance


Stress Intensity Factor Investigation of Critical Investigation of Surface Roughness of Al7075 Fire Tube immersion heaters for small scale
Mechanism on Machine Tool Vibration in Step-drilling
Surface Crack in a Cylinder Material Coated With Micro Arc Oxidation Method aluminum furnaces Using CFD Modeling
Process
Paper ID: 669 Paper ID: 431 Paper ID: 744
Paper ID: 721

11:30 11:45
Madjid Meriem-Benziane 1a*, Gadi Ibrahim 1b, Zahloul Ryosuke SHIBATA 1a, Toshiki HIROGAKI 1b, Eiichi AOYAMA
Hamou 1c, and BelAbbes Bachir-Bouiadjra 2d; 1-LRM, Mehmet Erbil ZCAN 1, Latif ZLER 1, and Nihat PARLAK 1c, Keiji OGAWA 2d, and Tatsuya YAMASHITA 1e; 1- Mohamed I. Hassan 1, A. Abd-Alqader 1, Marwan
Mechanical Engineering Department University of Chlef, B.P. 2; 1-Frat University, Department of Mechanical Doshisha University 1-3 Tatara Miyakodani, Kyotanabe-shi, Khraisheh 2; 1-Masdar Institute of Science and
151, Chlef 02000, Algeria, 2-LMPM, Department of Engineering, 23119 Elaz, TURKEY, 2-Mu Alparslan Kyoto 6100394, Japan, 2-Ryukoku University 67 Technology, Abu Dhabi, UAE, 2-Qatar Environment and
Mechanical Engineering, University of Sidi Bel Abbes, BP 89, University, Vocational School, 49000, Mu, Turkey Hukakusa Tsukamotochou, Kyoto-shi Kyoto 612-8577, Energy Research Institute (QEERI), Qatar
Cit Ben Mhidi, Sidi Bel Abbes, Algeria Japan

11:45 13:00 Lunch

13:00 13:45 Keynote

13:45 14:00 Break

Session Title Materials Testing and Mechanical Behavior Advanced Processing Machining Tools and their analysis Computer based methods

Charmin:
TBD TBD TBD TBD
Co-Charmin:

Simulation of free vibrations of a clamped-free beam Different gate Insulators for Organic Field Material Flow analyses of AA1100 to A441 AISI joint The Study in Feasibility Assessment of using Cross
using piezoelectric sensors and actuators EffectTransistors by FSW Flow Fan on the Laptop Computers

Paper ID: 699 Paper ID: 483 Paper ID: 21 Paper ID: 657

14:00 14:15
O. Boughias 1a, M.S. Belkaid 1b, T. Trigaud 2c, and Majid Elyasi 1a, Hamed Aghajani Derazkola 2b, and Morteza

www.ampt2014.com
R.Zirmi 1d; 1-Laboratory of Advanced Technology of Hoseinzadeh 3c; 1-Faculty of Mechanical Engineering, Babol
Ai-Tsung Li 1a, Ray-Quen Hsu 1b; 1-Department of
Bendine Kouider, and F, B. BOUKHOULDA; Laboratoire de Electrical Engineering, Electronics Department, University Noshirvani University of Technology, P.O. Box 484, Babol,
Mechanical Engineering, National Chiao Tung University,
Mcanique des Structures et des Solides, Universit Djillali of Mouloud Mammeri, Tizi-Ouzou, B. P No. 17 R.P, Mazandaran, Iran, 2-Department of Engineering, Islamic
Hsinchu, Taiwan, ROC
Liabes, Algeria Algeria, 2-Laboratory of X-LIM - CNRS, Plastic Azad University of Sari branch, Sari, Mazandaran, Iran, 3-
Optoelectronics Department, University of Limoges, Department of Engineering, Islamic Azad University of
France Aiatollah Amoli

28
Professional Program Day 3 (November 19, 2014)
Corrosion resistance performance of newly
Delamination analysis of carbon/glass hybrid polymer Prediction of Forming Limit Diagram Using M-K and
Mechanical Behavior of ABS and PC filled ABS Plastics developed Cobalt-free Maraging Steel over
composites in drilling process Swift-Hill Models via Yield Criteria for TRIP800
Conventional Maraging Steel in Acidic media
Paper ID: 118
Paper ID: 101 Paper ID: 95
Paper ID: 326
14:45 15:00
Yiin-Kuen Fuh a*, Shyong Leea Chun-Lin Chu b, and Jian-Yih Asiful H. Seikha*, Hossam Halfab, and El-Sayed M.
Wang c; a-Dept. of Mechanical Engineering, National Central Sherifa; a-Centre of Excellence for Research in Tan, C.L a, Azmi, A.I. b, Mohamad, N. c, Khalil, A.N.M. d,
Fahrettin Ozturk; Department of Mechanical Engineering,
University, Chungli 320, Taiwan, b-National Nano Device Engineering Materials, Advanced Manufacturing Institute, Leong, K.W. e; School of Manufacturing Engineering,
The Petroleum Institute, Abu Dhabi, UAE.
Laboratory, Hsinchu, Taiwan, c-Dept. of Materials Science King Saud University, P.O. Box - 800, Riyadh 11421, Universiti Malaysia Perlis, Pauh Putra Campus, 02600 Arau,
and Engineering, National Dong Hwa University, Hualien 974, Saudi Arabia, b-Steel Technology Department, Central Perlis, Malaysia
Taiwan Metallurgical R&D Institute (CMRDI), Helwan, Egypt.

www.ampt2014.com
Advances in Materials & Processing Technology Conference

Effect of seawater and tap water immersion on impact Measurement of Critical Damage Value of the High Investigating the Effect of Machining Parameters on AN EMPIRICAL METHOD OF CALCULATING
behavior of glass-epoxy and Kevlar-epoxy composites Tensile Strength Steel by means of Notched Plate Mechanical Performance of Flax Natural Fibre INTERFACIAL STRENGTH IN A SECOND PHASE
backed by Acoustic Emission Monitoring (AEM) Tensile Test Using Image Analysis Composites with Circular Holes REINFORCED ALLOY
Paper ID: 260 Paper ID: 340 Paper ID: 140 Paper ID: 112
15:00 15:15 Youns MENAIL 1a, Abderrahim EL MAHI 2b, Mustapha
Syed A A Shah 1a, and Syed T Hasan 1,2b; 1-Material
ASSARAR 3c, and Bachir REDJEL 4d; 1-University of Badji
Ryoma Adachi 1a, Yoshinori Yoshida 1b, and Takashi Engineering Research Institute, Sheffield Hallam University,
Mokhtar, Sidi Ammar, LR3MI, BP 12, 23000 - Annaba,
Matsuno 2c; 1-Department of Mechanical Systems Aiman Akmal, A.N. a, Azmi, A.I. b, and Khalil, A.N.M. c; City Campus, Howard Street, Sheffield S1 1WB, United
Algeria., 2-University of Maine, LAUM, CNRS UMR 6613,
Engineering, Gifu University, Yanagi-do 1-1, Gifu, 501- School of Manufacturing Engineering, Universiti Malaysia Kingdom, 2-Department of Engineering and Mathematics,
avenue Olivier Messiaen, 72085 Le Mans, Cedex 9, France.,
1193, Japan, 2-NIPPON STEEL & SUMITOMO METAL Perlis (UniMAP), Pauh Putra Campus, 02600 Arau, Perlis, Faculty of Arts, Computing, Engineering and Sciences,
3-University of Reims Champagne-Ardenne, LISM, EA 4695,
CORPORATION, 6-1, Marunouchi 2-chome, Chiyoda-ku, Malaysia Sheffield Hallam University, City Campus, Howard Street,
IUT de Troyes, 9 rue de Qubec 10026 Troyes Cedex,
Tokyo 100-8071, Japan Sheffield S1 1WB,
France, 4-University of Badji Mokhtar, Sidi Ammar, BP 12,
United Kingdom
23000 - Annaba, Algeria
15:15 15:30 Break
Session Title Materials Testing and Mechanical Behavior Advanced Processing Machining of Advanced Materials Process Design and analysis
Charmin:
TBD TBD TBD TBD
Co-Charmin:

29
Professional Program Day 3 (November 19, 2014)

A MESO MACRO MODEL PREDICTION OF


Aeromechanical Stability for the rotor blade vibration Study on Tool Edge Deformation in Axisymmetric Harmonic Structure Design of Ti-6Al-4V Alloy by High
LAMINATED COMPOSITE DAMAGE ELASTIC
analysis with adaptive composite damper Punching Process Pressure Gas Milling Process
BEHAVIOUR
Paper ID: 702 Paper ID: 343 Paper ID: 236
Paper ID: 165

15:30 15:45
Tomoyuki WATANABE 1a, Ryo MAEDA 1b, Kazuaki
Takafumi Noritake 1a, Yoshinori Yoshida 1b, and Takashi KUROKAWA 1c, Mie OTA 2d , Sanjay K VAJPAI 2e, and Kei
A.Chellil 1*, A.Nour 1, S.Lecheb 1, M.Khobizi 1, H.Mechakra
Matsuno 2c; 1-Department of Mechanical Systems AMEYAMA 3f; 1-Graduate School of Science and A. Hocine, A. Ghouaoula, S.M. Medjdoub, M. Cherifi, and
1, and H.Kebir 2; 1-Dynamic of Engines and Vibroacoustic
Engineering, Gifu University, Yanagi-do 1-1, Gifu, 501- Engineering, Ritsumeikan University, Kusatsu-City, Shiga 525-A. Maizia; Hassiba Benbouali University of Chlef,
Laboratory, F.S.I., M.B. Boumerdes University, Algeria, 2-
1193, Japan, 2-NIPPON STEEL & SUMITOMO METAL 8577, Japan, 2-Ritsumeikan Research Organization of Laboratory of Controls, Testing, Measurement and
Roberval Laboratory, UMR CNRS-UTC 7337, Universit de
CORPORATION, 20-1, Shintomi, Futtsu , Chiba, 293- Science and Technology, Kusatsu-City, Shiga 525-8577, Mechanical Simulations, Chlef, Algeria
Technologie de Compigne, France
8511, Japan Japan, 3-Faculty of Science and Engineering, Ritsumeikan
University, Kusatsu-City, Shiga 525-8577, Japan

Structure and mechanical properties of pure-Ti with Prediction of Central Bursting in the Process of
MEASUREMENT OF LIFETIME OF ROLLER IN TERMS Study on preparation of flexible semiconductor
harmonic structure by High Pressure Gas Milling Forward Extrusion Using the Uncoupled Ductile
OF THERMOMECANICAL PARAMETERS electrode for dye-sensitized solar cells by EPD
Process Failure Models
Paper ID: 705 Papar ID: 484
Paper ID: 237 Paper ID: 197

15:45 16:00
K. Kurokawa 1a, H. Kawabata 1b, T. Watanabe 1b, M.Ota
Riad Harouz 1, Brahim Mahfoud 2, Mokhtar Ghers 2c, S. K. Vajpai 2d, K. Ameyama 3e; 1-Graduate School of
3,Nourdine Abdelbaki 4; 1-University Akli Oulhadj Bouira, Science and Engineering, Ritsumeikan University, Kusatsu-
W.T. Chiang 1*, P.T. Lee 1, R.Q. Hsu 1; 1-National Frantiek ebek 1a, Petr Kubk 1b, and Jindich Petruka
Algeria, 2-University Akli Oulhadj Bouira, Algeria, City, Shiga 525-8577, Japan, 2-1Ritsumeikan Research
Chiao Tung University, Department of Mechanical 1c; 1-Brno University of Technology, Brno, Technick
3-University Badji Mokhtar Annaba, Algeria, 4-University Akli Organization of Science and Technology, Kusatsu-City, Shiga
Engineering, Hsinchu, Taiwan 2896/2, 616 69 Brno, Czech Republic
Oulhadj Bouira, Algeria 525-8577, Japan
3 Faculty of Science and Engineering, Ritsumeikan
University, Kusatsu-City, Shiga 525-8577, Japan

Nanoindentation and AFM Studies of Hard WC- Effects of Sheared Surface Characteristics and
Mechanical Properties of Novel Kenaf Short Fiber A Prediction of laser beam-to-cutting tool distance of
(Co)7-x-(ZrO2)x Bulk Nanocomposites Prepared Surface Treatments on Trimming Die used in 1.2
Reinforced Bulk Molding Compounds (BMC) Inconel 718

www.ampt2014.com
by Spark Plasma Sintering of Ball Milled Powders GPa Ultra High Strength Steel Shearing Processes
Papwer ID: 710 Paper ID: 296
Paper ID: 510 Paper ID: 283

16:00 16:15
S. Sreenivasan 1*, S. Sulaiman 1, B. T. H. T. Baharudin 1, S. H. Cha 1a, J. D. Nam 1b, M. S. Ahn 1c, P. K. Seo 1d, K.
M. Sherif El-Eskandaranya, Abdulsalam Al-Hazza, Ahmed
M. K. A. Ariffin 1, and K. Abdan 2; 1-Mechanical and E. A. Rahim 1, N. M. Warap 1*, Z. Mohid 1d, M. R. Ibrahim W. Won 1e, and B. M. Kim 2f; 1-Stamping Tool
Al-Duweesh, Aisha Al-Rowayeh, and Ehab Shaban;
ManufacturingEngineering Department, Faculty of 1, M. I. S. Ismail 2; 1-Advanced Machining Research Group, Engineering, Shinyoung Co., Ltd., Yeongcheon-City,
Nanotechnology and Advanced Materials Program,
Engineering, University Putra Malaysia, 43400 Serdang, University Tun Hussein Onn, Johor, Malaysia, 2-Departent of Gyeong Buk, South Korea, 2-School of Mechanical
Energy and Building Research Center, Kuwait Institute for
Selangor D. E. Malaysia, 2-Biological and Agricultural Mechanical and Manufacturing Engineering, University Putra Engineering, Institute of Technology, Pusan National
Scientific Research, Safat 13109, Kuwait - State of
Engineering Department, Faculty of Engineering, University Malaysia, Selangor, Malaysia University, San 30, Jangjeon-Dong, Geumjeon-Gu,
Kuwait
Putra Malaysia, 43400 Serdang, Selangor D. E. Malaysia Busan, South Korea

30
Professional Program Day 3 (November 19, 2014)
QUENCHING AND PARTITIONING FOR SHEET STEEL Process excellence by embedding of Radio
Investigation on Acoustic Monitoring and Parametric
AUTOMOTIVE APPLICATION (EFFECT OF CARBON Exploring Possibility of Using UHPC for Special Frequency Identification (RFID) Tag in the
Optimization of EDM of INCOLOY 800 using Grey
CONTENT ON RETAINED AUSTENITE VOLUME Applications in Petrochemical Facilities production of composite parts in aeronautical
Relation Analysis
FRACTION) engineering
Paper ID: 194
Paper ID: 687
Paper ID: 711 Paper ID: 290
16:15 16:30
H - A. Alhas 1,2, E. Bayraktar 1, M. Zolghadri 1, and C
Loai Mohammed Al-Owa 1a, and Shamsad Ahmad 2b; 1- Nizam 3; 1-Supmeca-LISMMA-Paris, Mechanical and
R S Barot 1a, Dr K P Desai 2b, Dr H K Raval 3c; 1-
Othman Almalki; T&I, SABIC Technology Center - Jubail; Inspection Department, Saudi Aramco, Dhahran, Saudi Manufacturing Engineering School, France, 2-Airbus-
Production Engg. Dept., B V M Engineering College, V V
Saudi Arabia Arabia, 2-Civil & Environmental Engineering Department, Helicopter, Quality improvement; civil and military
Nagar, India , 2,3-Mechanical Engg. Dept., Sardar
King Fahd University of Petroleum & Minerals, Dhahran, applications, Paris - La Courneuve, France, 3-Airbus-
Vallabhbhai National Institute of Technology, Surat, India
Saudi Arabia Helicopter-Research Headquarter-Value Chain Visibility,
Toulouse, France

www.ampt2014.com
Advances in Materials & Processing Technology Conference

Optimizing and modelling of injection moulding


High Temperature deformation behavior of 2219 STUDY OF THE TECHNOLOGICAL PARAMETERS OF Machinability analysis when drilling Kovar shape
process parameters using combination of Taguchi
Aluminum Alloys Micro-Alloyed with Silver THE PLASMA SURFACE TREATMENT PROCESS memory alloys
design of experiment and Fuzzy expert system
Paper ID: 181 Paper ID: 530 Paper ID: 581
Paper ID: 494
16:30 16:45
A.Stoyanova 1, D.Spasova 1*, T.Spasov 2; 1-Technical Islam Shyha 1,2a, and Munachi Patrick 1b; 1-University of
Purnendu Kumar Mandal 1a, and P S Robi 1b; 1-Department Md. Altab Hossain; Department of Mechanical Engineering,
University of Varna, Varna, Bulgaria, 2-High Northumbria at Newcastle, Newcastle Upon Tyne NE1 8ST,
of Mechanical Engineering, Indian Institute of Technology Faculty of Engineering, University of Malaya (UM), 50603,
ScoolPMGAkademik Nikola Obreshkov, Razgrad, UK, 2-Production Engineering Department, Faculty of
Guwahati, India, 781039 Kuala Lumpur, W. P. Kuala Lumpur, Malaysia
Bulgaria Engineering, Alexandria University, 21544 Alexandria, Egypt
Improved Surface Integrity from Cryogenic Machining
Frictional behavior of lubrication coatings for cold Magnetic Pulse Forming: Simulation and The Effect of Foam and PA6 Reinforcement on
of Al 7050-T7451 Alloy with Ultra-fine Grained
forging in upsetting-ball ironing test Experiments for high-speed forming processes Bending Performance of 6063-T5 Tube
Structure
Paper ID: 235 Paper ID: 716 Paper ID: 501
Paper ID: 337
16:45 17:00
Zhigang Wang 1a, Senri Kawaguchi 2b, and Shinobu B. Huang 1a, Y. Kaynak 2b, C. Arvin 1c, and I.S. Jawahir 1d;
Komiyama 3c; 1,2-Department of Mechanical Engineering, Jos R. Alves Z. 1a, and Franois Bay 1b; 1-Center for 1-Institute of Sustainable Manufacturing and Department of Seil Eki 1a, and Kenan Genel 2b; 1, 2-Department of
Gifu University, 1-1 Yanagido Gifu, Japan, 3-Nihon Material Forming (CEMEF) MINES ParisTech UMR CNRS Mechanical Engineering, University of Kentucky, Lexington, Mechanical Engineering, Faculty of Engineering, University
Parkerizing Co.,Ltd., 2784, Ohkami, Hiratsuka, Kanagawa, 7635 BP 207, F-06904 Sophia-Antipolis Cedex, France Kentucky, USA, 2-Department of Mechanical Engineering, of Sakarya
Japan Faculty of Technology, Marmara University, Istanbul, Turkey

31
Professional Program Day 4 (November 20, 2014)

AMPT 2014

16- 20 November 2014

Day 4 (November 20, 2014)


Time

start End Track 1: Materials Characterization & Properties Track 2: Advanced Materials & Processes Track 4: Materials Machining Processes Track 5: Process Design, Modeling & Casting

8:00 8:45 Keynote

8:45 9:00 Break

Session Title Materials Testing and Mechanical Behavior Advanced Processing Machining of Advanced Materials Process Design and analysis

Charmin:
TBD TBD TBD TBD
Co-Charmin:

Study of Rapid Heating effects on Mechanical


Fatigue Behavior of Cemented Carbide Die in Investigation of Step Pressure Path influence on Cylindrical
Deep Level Transient Spectroscopy of InGaN-LEDs Properties and Microstructure of Aluminum
Extrusion-Upsetting Cup Formation through Hydrodynamic Deep Drawing
AA7075
Paper ID: 505
Paper ID: 242 Paper ID: 472
Paper ID: 515

9:00 9:15
S. Sharifi 1a, H. Saghafian 2b, and S. H. Razavi 3c; 1-
Ali Taghizadeh Armeki *1, Jafar Bazrafshan 2, and Abdolhamid
ZHIGANG WANG 1a, MASAHIRO ISHIKAWA 1b, and Nazir A. Naz 1, M. Imran 2, and Akbar Ali 1,2; 1-Department School of Metallurgy and Materials Engineering, Iran
Gorji 3; Sama technical and vocational training college, Islamic
HAOJIE LI 2c; 1-Department of Mechanical Engineering, of applied Physics, Federal Urdu University of Arts, Science University of Science and Technology, Tehran, Iran, 2-
Azad University, Ayatollah Amoli Branch - Department of
Gifu University 1-1 Yanagido Gifu Japan, 2-ARRK and Technology, Islamabad, Pakistan., 2- Department of School of Metallurgy and Materials Engineering, Iran
Mechanical Engineering, Islamic Azad University, Ayatollah Amoli
CORPORATION, 2-2-9 Minamihonmachi, Osaka Chuo- Basic Sciences, Riphah International University, Islamabad, University of Science and Technology, Tehran, Iran, 3-
Branch / Amool, Iran- Department of Mechanical Engineering,
ku, Osaka Japan Pakistan School of Metallurgy and Materials Engineering, Iran
Babol Noshirvani University of Technology / Babol, Iran
University of Science and Technology, Tehran, Iran

www.ampt2014.com
SIZE EFFECT AND STUDY OF THE BEHAVIOR OF
Path integral solution for Dirac particle in a constant electric Electro-Discharge Machining of Metal Matrix Composite Fabrication of Functional Metal Prototypes using
CONCRETE BEAMS REINFORCED WITH STEEL
field Materials Rapid Prototyping and Rapid tooling Techniques
FIBERS
Paper ID: 545 Paper ID: 590 Paper ID: 659
Ppaer ID: 269

9:15 9:30
Fatima Setti 1a, Karim Ezziane 2b, and Bakhti Setti 3c; Islam Shyha 1,2a, and Mark Rudd 3b; 1-University of
1-Geomaterials Laboratory, University Hassiba Northumbria at Newcastle, Newcastle upon Tyne NE1 8ST,
Chil-Chyuan Kuo, Ming-Ren Li, and Zhen-Jia Xu; Ming Chi
Benbouali, Chlef, Algeria, 2-Geomaterials Laboratory, UK., 2-Production Engineering Department, Faculty of
Nadira Boudiaf, universit constantine, constantine, Algerie University of Technology, No. 84, Gungjuan Road,
University Hassiba Benbouali, Chlef, Algeria, 3- Engineering, Alexandria University, 21544 Alexandria, Egypt.,
Taishan Dist. New Taipei City 24301, Taiwan
Laboratory Materials Science and Environment, 3-AMEC, Innovation Centre, Westlakes Science and
University Hassiba Benbouali, Chlef, Algeria Technology Park, Whitehaven CA24 3TP UK

32
Professional Program Day 3 (November 19, 2014)
Behaviour Of Confined Connections Column-Beam Liquid Phase Surface Melting of Ti-6Al-4V in Argon and Design and Analysis of Lightweight Automotive
in Steel Fiber Reinforced Concrete Nitrogen Atmospheres Component for Turbocharger Units
Paper ID: 282 Paper ID: 561 Paper ID: 208
9:30 9:45
B. Setti 1a, S. Hammoudi 1, F. Setti 2b, M. Achit-Henni Abdul Ghafar Wattoo 1, Ahmad Saeed 1, Muhammad
Alireza Vahedi Nemani a, M. Heydarzadeh Sohi *b, A.A. Amadeh c,
1; 1-Laboratory Materials Science and Environment, Rizwan 2, Akbar Ali 1, Nazir A. Naz 1; 1-Department of
and Mahya Ghaffari d; School of Metallurgy and Materials
University Hassiba Benbouali, Chlef, Algeria, 2- Applied Physics, Federal Urdu University of Arts, Science
Engineering, University College of Engineering, University of
Geomaterials Laboratory, University Hassiba Benbouali, and Technology, Islamabad, 44000., 2-Department of
Tehran, P.O. Box 11155-4563, Tehran, Iran
Chlef, Algeria Chemistry, Quaid-i-Azam University, Islamabad, 44000.
Session Title Machining Control
Continue Continue Continue
Charmin:
TBD

www.ampt2014.com
Co-Charmin:
Advances in Materials & Processing Technology Conference

Wear and Friction Behavior of Magnesium Hybrid


Sheet hydrodynamic deep drawing assisted by radial LASER CUTTING OF 2024 ALUMINUM ALLOY AND Modeling and Verification of an Acrylic Adhesive as
Composites Containing Silicon Carbide and Multi-
pressure at elevated temperatures CUTTING QUALITY ASSESSMENT a Hyperelastic Material
Walled Carbon Nanotubes
Paper ID: 567 Paper ID: 73 Paper ID: 688
Paper ID: 311
9:45 10:00
Qumrul Ahsan 1a, Tee Zhen Wei 1b, Siti Rahmah Bt
Shamsuri 1c, Chang Siang Yee 1d, and Mohd Warikh
Ehsan Khosrojerdi 1a, Mohammad Hosseinpour 1b, Abdolhamid Omer Keles 1a, Bekir Sami Yilbas 2b; 1-Mechanical Eng. Abdul Hai Alami a, and Huma Bilal b; Sustainable and
Abd Rashid 1e; 1-Department of Engineering Materials,
Gorji 1c, and Mohammad Bakhshi 1d; 1-Faculty of mechanical Dept. Gazi University, Ankara, Turkey., 2-Mechanical Eng. Renewable Energy Engineering, University of Sharjah,
Faculty of Manufacturing Engineering, Universiti Teknikal
engineering, Babol University of Technology, Babol, Iran Dept. KFUPM Box 1913, Dhahran, Saudi Arabia P.O.Box 27272, Sharjah, UAE
Malaysia Melaka, Durian Tunggal, 76100 Melaka,
Malaysia.
Electrochemical Corrosion Behavior of Spirally- AOI Strategies for Defects Identification of Micro-Electro Analysis of Cut Surface Quality of Metal Sheets Design of a Compact Heat Exchanger for
Welded API Line-pipe Steel in Acidic and Salt Media Mechanical System Elements Obtained by Laser Machining: Thermal Effects Superplastic Forming
Paper ID: 325 Paper ID: 732 Paper ID: 228 Paper ID: 692
10:00 10:15 Asiful H. Seikh a*, Muneer Baig a, Magdy M. El Rayes b,
Sohail M. Khan b, Mohammad Rezaul Karim a; a-Centre Imed Miraoui 1a, Mohamed Boujelbene 2,3, and Emin
Nuha Juneidi 1a, Rania Asha 1b, Firas Jarrar 2c, and
of Excellence for Research in Engineering Materials Young, H.T. 1a, Chiou, H.S. 2b, and Huang, W.R. 1c; 1-Mechanical Bayraktar 3 ; 1-Aljouf University, College of Engineering,
Fahrettin Ozturk 2d; 1-Department of Mechanical
(CEREM), Advanced Manufacturing Institute, King Saud Engineering, National Taiwan University, Taiwan, 2-Eletrical Mechanical Engineering Department, Sakaka, KSA, 2-
Engineering, University of Jordan, Amman, Jordan., 2-
University, P.O. Box - 800, Riyadh 11421, Saudi Arabia, Engineering, Taipei Chengshih University of Science and University of Gafsa, College of Sciences, Research Unity
Department of Mechanical Engineering, The Petroleum
b-Mechanical Engineering Department, College of Technology, Taiwan MEER, Gafsa, Tunisia, 3-Supmeca, School of Mechanical and
Institute, Abu Dhabi, UAE.
Engineering, King Saud University, P.O. Box - 800, Manufacturing Engineering, Paris, France.
Riyadh 11421, Saudi Arabia

33
Professional Program Day 3 (November 19, 2014)

10:15 10:30 Break

Session Title Materials Testing and Mechanical Behavior Advanced Processing Machining Control Process Design and analysis

Charmin:
TBD TBD TBD TBD
Co-Charmin:

On the effect of time, temperature and atmosphere on the Control technology based on idling stop function to
Fatigue life calculation by cycle counting method Investigation the effect of testing parameters on
formation of (Ni, W) intermetallic compounds via diffusion reduce power consumption with multi-axis controlled
under random loading adhesive wear using Taguchi Method
couple technique compact machine tools.
Paper ID: 471 Paper ID: 713
Paper ID: 733 Paper ID: 244

10:30 10:45

Fatima Bajmanloo 1, and Mansour Soltanieh 1; Centre of


Yusuke FUJIMOTO 1a, Eiichi AOYAMA 1b, Toshiki HIROGAKI
Sahnoun Zengah 1a, Abdelkrim Aid 1a, Mohamed Excellence for High Strength Alloys Technology, School of
1c, and Keiji OGAWA 2d; 1-Doshisha University1-3 Tatara
Benguediab 2b; 1-Laboratoire LPQ3M, B.P 305, Metallurgy and Materials Engineering, Iran
Miyakodani Kyotanabeshi Kyoto 610-0394, Japan., 2- Mehmet MR; Cumhuriyet University, Sivas, Turkey
University of Mascara, 29000-Algria, 2-University of University of Science and Technology, Tehran 16844, Iran
Ryukoku University 67 Hukakusa Tukamotochou, 0Kyoto-shi
Djillali Liabes, Sidi Bel Abess, Algeria
Kyoto 522-8533, Japan

Tribological Behavior during Rolling of Ultra-low


Implementation of an Epoxy-based micro-structure surface Development of Trimming Die with 1.2GPa Steel
Carbon Steel at Warm Temperature Range with The phenomenon of cutting in machining
for improving efficiency of a solar cell module Grade
Solid Lubricant
Paper ID: 450
Paper ID: 734 Paper ID: 283
Paper ID: 646

10:45 11:00 S. H. Cha 1a, J. D. Nam 1b, M. S. Ahn 1c, P. K. Seo 1d,
K. W. Won 1e, and B. M. Kim 2f; 1-Stamping Tool
HIMED Lynda 1a , BENMOHAMMED Brahim 2b; 1,2-Research
Engineering, Shinyoung Co., Ltd., Yeongcheon-City,
Ning Kong 1a*, Kiet Tieu 1b, Hongtao Zhu 1c, and laboratory in Computer-integrated manufacturing (LRP).
Ming-Jong Tsai 1a, Szu -Yu Chen 1, J. W. Chen 1, and Cheng-Yu Gyeong Buk, South Korea, 2-School of Mechanical
Qiang Zhu 1d; 1-Faculty of Engineering and Information University of Batna- Faculty of Science of Engineer
Peng 2; Taipei, Taiwan, No.43, Sec. 4, Keelung Rd., Daan Dist., Engineering, Institute of Technology, Pusan National
Sciences, University of Wollongong, Northfields, Departement of Mechanic, 1 avenue Chahid Boukhlouf
Taipei 106, Taiwan University, San 30, Jangjeon-Dong, Geumjeon-Gu,

www.ampt2014.com
Wollongong, NSW 2522, Australia Mohamed El Hadi Batna (05000), Algria
Busan, South Korea Korea

Fatigue damage accumulation using an energy


DYE-SENSITIZED SOLAR CELL FABRICATION: TEORETICAL Flexural Behavior of Different Cellular Structures Development of New Technique for Reverse
model for steel subjected to block programs
AND EXPERIMENTAL OPTIMIZATION Created by Electron Beam Melting Engineering by Microstructure Features Detection
loading.
Paper ID: 128 Paper ID: 451 Paper ID: 672
Paper ID: 740

11:00 11:15 Syed Abdullah 1,2, Mohammed Rezaul Karim 2*, Md. Taslim Raza
1,2, Mohammad Ali 2, Abdulrahman Alahmari 1,2, and Ashraful Afshin Mohammadhosseini 1a, Darren Fraser 2b, S.H. Masood
Abdelkrim AID 1a, Mostefa. BENDOUBA 1b, Mohamed
Islam 2; 1-Industrial Engineering Department, College of 1c, Mahnaz Jahedi 2d; 1-Faculty of Science, Engineering and Hebatalrahman, A 1a, Farrag, A. M 2, Mohamed G.
BENGUEDIAB 2c; 1-Laboratoire LPQ3M, Universit de
Engineering, King Saud University, P.O. Box:800, Riyadh 11421, Technology, Swinburne University of Technology, Hawthorn, Gomaa 2, A. Magdy 2, and A Osama 2; 1-Consultant in
Mascara, B.P 305, Mascara, 29000, Algeria., 2-
Kingdom of Saudi Arabia, 2-Center of Excellence for Research in Melbourne, Vic 3122, Australia, 2-Commonwealth Scientific material science, Egypt, 2-Helwan university, faculty of
Dpartement de gnie mcanique, Universit de Djilali
Engineering Materials (CEREM), Advance Manufacturing Institute, and Industrial Research Organisation, Clayton, Melbourne Vic computer and information technology, Egypt
Liabs, Sidi Bel Abss.
College of Engineering, King Saud University, Riyadh 11421, 3168, Australia.
Kingdom of Saudi Arabia

34
Professional Program Day 3 (November 19, 2014)
THE EFFECT OF SiO2 ADDITION ON THE FORMATION AND An Experimental Investigation on Cutting Performance
DETERMINATION OF TENSILE AND SHEAR A Study on the Optimum Locations of Mounting
SUPERCONDUCTING PROPERTIES OF Bi2Sr2CaCu2O8+d of Abrasive Water Jet Machining of Austenite Steel
STRENGTHS USING A NEW TEST SPECIMEN Strain Gauges on Torsional Split Hopkinson Bar
SYSTEM (AISI 316L)
Paper ID: 54 Paper ID: 349
Paper ID: 580 Paper ID: 541
11:15 11:30
N. Boussouf 1, 2a, M. F. Mosbah 2,3b, M.Hamel 2c, and
Gholam Hossein Majzoobi 1, Farhan Khodaee 2; 1- S.Menassel 2d; 1-University Centre of Mila, Algeria. Institute of Puneet Trivedi 1a, Ajit Dhanawade 2b, Shailendra Kumar 3c; 1-
Department of Mechanical Engineering, Bu Ali Sina Science and Technology. Department Of Technical Science., 2- Department of Mechanical Engineering, Parul Institute of G.H. Majzoobi 1a, and K. Rahmani 1b; 1-Mechanical
University, Hamedan, Iran, 2-Department of Biomedical Material Science and Applications Research Unit, Physics Technology, Vadodara, Gujarat, India, 2,3-Department of Engineering Department, Faculty of Engineering, Bu-Ali
Engineering, Amikabir University of Technology (Tehran Department, Mentouri University, Route de Ain-el-Bey 25017 Mechanical Engineering, S. V. National Institute of Technology, Sina University, Hamadan, Iran
Polytechnic), Tehran, Iran Constantine, Algeria., 3-Ecole Nationale Polytechnique de Surat-395007, Gujarat, India
Constantine. Ville universitaire. Nouvelle Ville Ali Mendjeli. Algeria.

www.ampt2014.com
An analytical model for long tube hydroforming in a MODERN AB-INITIO CALCULATIONS BASED ON
Advances in Materials & Processing Technology Conference

Characterization of a Graphene-Basd Thermoelectric


square cross-section die considering anisotropic TOMAS-FERMI-DIRAC THEORY WITH QUANTUM,
Gnenerator Using a Cost Effective Fabrication Process
effects of the material CORRELATION AND MULTI-SHELLS CORRECTIONS
Paper ID: 624
Paper ID: 644 Paper ID: 518
11:30 11:45
Lama Mahmoud 1a, Mohammad Alhawari 2b, Yarjan Abdul Samad
3c, Baker Moahammad 4d, Kin Liao 5e, and Mohammad Ismail 6f;
H. Haghighat, and A. Janghorban; Mechanical S. V. Seriy; Informatization Department, Komsomolsk-
1,2,4,6-Department of Electrical and Computer Engineering,
Engineering Department, Razi University, Kermanshah, on-Amur state technical university
Khalifa University, Abu Dhabi, UAE, 3,4,6-Department of
Iran
Mechanical and Aerospace Engineering, Khalifa University, Abu
Dhabi, UAE
11:45 13:00 Lunch
13:00 13:30 Keynote
13:30 13:45 Break
Session Title Advanced Processing Process Design and analysis
Charmin:
TBD TBD
Co-Charmin:
A Comparative Study of Turbulence Models
Microstructure and Properties of Spark Plasma Oxidation protection behaviour of titanium aluminide
Performance for the Dispersion of Motor Vehicle
Sintered Al 1 wt%SiC nanocomposite coatings developed by TIG technique
Pollutants
Paper ID: 757 Paper ID: 627
Paper ID: 670
13:45 14:00
Ismaila Kayode Aliyu, Nouari Saheb, Syed Fida Hassan,
and Nasser Al-Aqeeli; Department of Mechanical Hamou Zahloul 1a, Ratiba Belhaouari 1b, and Madjid
S. Mridha 1, and T.N. Baker2; Department of Mechanical and
Engineering, Center of Research Excellence in Meriem-Benziane 1c; 1-Rheology and Mechanics
Aerospace Engineering, James Weir Building, University of
Nanotechnology, King Fahd University of Petroleum and laboratory, Hassiba Benbouali University, PO BOX 151,
Strathclyde, Glasgow G1 1XJ, UK
Minerals, Dhahran 31261, Saudi Arabia Chlef 02000, Algeria

35
Professional Program Day 3 (November 19, 2014)

Liquid Phase Surface Alloying of AZ31 Magnesium Alloy with


Silicon and Iron

Paper ID: 564

14:00 14:15

Mahya Ghaffari a, M. Heydarzadeh Sohi *b, A. A. Amadeh c, and


Alireza Vahedi Nemani d; School of Metallurgy and Materials,
College of Engineering, University of Tehran, P.O. Box 11155-
4563, Tehran, Iran

Development of cube textured Ni-W alloy substrates and


further applications for coated conductors

Paper ID: 96

14:15 14:30
Hongli SUO*, Lin MA, Yichen MENG, Yanling CHENG, Min LIU, Yue
Zhao, Mangmang GAO, Yi WANG and Hui TIAN; Key Laboratory of
Advanced Functional Materials, Ministry of Education, College of
Materials Science and Engineering, Beijing University of
Technology, 100 Pingleyuan, Chaoyang District, Beijing 100124,
China

www.ampt2014.com
36
Exhibition Stand Layout

Atlantis, The Palm is a resort located on Dubais reclaimed artificial island The Palm. It was the first resort to be built on the island and
is based on the myth of Atlantis includes distinct Arabian elements. The resort has two accommodation wings, also referred to as the Royal
Towers, consisting of the East and the West Tower, both linked together by the Royal Bridge Suite. The resorts comprises 1,500 guestrooms
and suites with private balconies and views over The Palm and the Gulf. The Imperial Club has over 150 rooms and suites with exclusive
services and a private club lounge and views of The Palm and Dubai skyline.

X01 - ATTIEH STEEL


X02 - ARAMCO
X03 - KHUSHEIM COMPANY

37
www.ampt2014.com 38
Advances in Materials & Processing Technology Conference

Tamimi Company / Commercial Groups

39 www.ampt2014.com
www.ampt2014.com 40
Advances in Materials & Processing Technology Conference

41 www.ampt2014.com
ADVERTISEMENT PARAGRAPH
SMI is a company specialized in the manufacturing of engineered
products and components with over (30) years of experience in this
field. Our success is derived from our focus on meeting customers
requirements with a commitment to excellence in providing quality
products and service, ensuring customer satisfaction.
With all under one roof, SMI has a fully integrated capabilities starting
with Reverse Engineering, Pattern Making, Ferrous and Non-Ferrous
Foundries, Modern CNC Machining and Quality Testing.

www.ampt2014.com 42
Advances in Materials & Processing Technology Conference

Conference Leaders
Conference Chair Dr. Hussain Al Fadhli Saudi Aramco, KSA
Conference Chair Prof. Marwan Khraisheh Masdar,UAE
Conference Chair Prof. Abdel Majid Hamouda QU-Qatar
Honorary Chairman Prof. M.S.J. Hashmi Chairman, International Steering Committee of AMPTInternational
Conference SeriesInternational Conference Series

Steering Committee
Prof. M.S.J. HASHMI (Chairman) Ireland Prof. F. YIGIT Turkey
Prof. J. LAWLER Ireland Prof. J.M. TORRALBA Spain
Prof. M. ANDRITSCHKY Portugal Prof. Y.T. IM, Korea
Prof. J. MONAGHAN Ireland Prof. F.W. TRAVIS UK
Prof. M. BUGGY Ireland Prof. B.S. YILBAS Saudi Arabia
Prof. S.R. REID UK Prof. S. MRIDHA Malaysia
Prof. L.A. DOBRZAN'SKI, Poland Prof. F. AL-SULAIMAN Saudi Arabia
Prof. S. SULAIMAN Malaysia Prof. Y. CHASTEL France
Prof. J.S. GUNASEKERA USA Prof. E. BAYRAKTAR France

Conference Technical Committee


Prof. Mohammad Omar (Chairman) Masdar, UAE
Prof. Jamal Nayfeh (Co-Chair) PMU,KSA Dr. Gasan Alabedi Saudi Aramco, KSA
Prof. Zuhair Gasem KFUPM, KSA Prof. FirasJarrar The Petroleum Institute, UAE
Mr. Mana Al-Mansour Saudi Aramco, KSA Dr. Sahin, Ahmet Z KFUPM,KSA
Dr. Mansour Al-Harbi SABIC-KSA Dr. Abdullah Al-Shahrani Saudi Aramco, KSA
Dr. Ihsan Al Taie Saudi Aramco, KSA Prof. Rashid Abu Al Rub Masdar, UAE
Dr. Mariam Ali Al-Maadeed Qatar University Dr. Hassan, Syed Fida KFUPM,KSA
Prof. Bassam Al-Bassam KSU, KSA Dr. Sathyan Krishnan PMU,KSA
Prof. Raed Hashaikeh Masdar, UAE Dr. Mohammed Bouhrara Saudi Aramco, KSA
Dr. Iyad Al Zaharnah KFUPM, KSA Prof. Ahmed Al Jaberi Masdar, UAE
Prof. Kumar Shanmugam Masdar, UAE Dr. Khan, Shafique A KFUPM,KSA
Dr. Waleed Al-Shalfan SABIC, KSA Prof. Raed Hashaikeh Masdar, UAE
Prof. Fahad A Maskari The Petroleum Institute, UAE Dr. Nader Sawalhi PMU,KSA
Dr. Khaled Al Hajri SABIC, KSA Dr. Mezghani, Khaled KFUPM,KSA
Dr. Marwan Al Mojil SABIC, KSA Mr. Fadi Al Badour PMU,KSA
Prof. Abdelqader Abusafieh Mubadala A., UAE Prof. Fahad A Maskari The Petroleum Institute, UAE
Dr. Abdelmounam Sherik Saudi Aramco, KSA Dr. Nouari, Saheb KFUPM,KSA
Dr. Elsadig Mahdi Qatar University Dr. Andi Asiz PMU,KSA
Dr. Tahir khan Qatar University Prof. Fahrettin Ozturk The Petroleum Institute, UAE
Dr. Abdul Khaliq KFUPM,KSA Dr. Toor, Ihsanul Haq KFUPM,KSA

43 www.ampt2014.com
Conference Organization Committee
Conference Organizing Commit- Organizing Committee Board
Conference Chair Dr. Hamad Al-Mostaneer SABIC, KSA Mr. Ibrahim Asiri Sadara, KSA
Conference Industrial Chair Mr. Yasser A. Al-Shehri Saudi Aramco, KSA Mr. Hisham Abusaud Saudi Aramco, KSA
consultant Dr. Mohammed Al-Rabie Sadara, KSA Dr. Saed Al-Shahrani SABIC, KSA
Professional Program Chair Mr. Mohmmed Mana Al- Jafar Saudi Aramco, KSA Mr. Ahmed S. Al-Omari Saudi Aramco, KSA
Conference co Chair Dr. Amal Al-Ghaferi Masdar, UAE Prof. Mohammad Omar Masdar, UAE
Mr. Hassan Al-Malki Saudi Aramco, KSA
Conference Organizing Com- Mr. Sultan Ibrahim Al-Shehri
Prof. Yousef A Hammadi
Saudi Aramco, KSA
Masdar, UAE
Ms. Manal S. Badhfer KATS, KSA Prof. Ahmed Al-Jaberi Masdar, UAE
Mr. Omar Al-Mana Saudi Aramco, KSA
Organizing Advisory Consoul Prof. Jamal Ahmed
Mr. Mohammed A. Al-Ghamdi
The Petroleum
Saudi Aramco, KSA
Mr. Khalid Al-Bohamdoh SABIC, KSA Mr. Ali A. Al-Shehri Saudi Aramco, KSA
Mr. Sultan S. Al-Shehri Saudi Aramco, KSA Mr. Saeed A. Al-Qhatani Saudi Aramco, KSA
Dr. Abdullah Al-Refai CRI/SABIC, KSA Mr. Mohammed Al-Hammadi Saudi Aramco, KSA
Mr. Faisal Al-Asmari Sabic, KSA

www.ampt2014.com 44
Advances in Materials & Processing Technology Conference

Benets Offered to Sponsoring Company

1) PLATINUM ELITE SPONSOR US$ 100,000


a. Company name and logo of appropriate sizes will be published in all the conference publicity materials as Elite Platinum Sponsor.
b. Entitled for thirty square meter stand space with stand fittings at the exhibition hall.
c. Six delegates from the sponsoring company may attend the conference with full package free of charge.
d. Publicity materials will be included in the conference pack.
e. Company name and logo with a brief profile will be published in the conference web site which shall be connected to the Sponsors web site.
f. Two full page advertisement shall be provided in the Exhibition Guide to the Elite Platinum Sponsor.
g. Sponsored company will be honored with a Plaque by the Conference Patron at the Opening Ceremony.
h. Executive Officers will be treated as VIPs during the event and official lunches and dinner.
i. Company logo size 3 m x 3 m will be displayed in the conference hall along with the conference banner and outside lobby.
j. Company name and logo will be published in the conference proceedings.
k. A honorary Silver medal will be awarded
l. Honored with the conference dinner

2) PLATINUM SPONSOR US$ 50,000


a. Company name and logo of appropriate sizes will be published in all the conference publicity materials as Platinum Sponsor.
b. Entitled for fifteen square meter stand space with stand fittings at the exhibition hall.
c. Four delegates from the sponsoring company may attend the conference with full package free of charge.
d. Publicity materials will be included in the conference pack.
e. Company name and logo with a brief profile will be published in the conference web site which shall be connected to the Sponsors web site.
f. A full page advertisement shall be provided in the Exhibition Guide for the Platinum Sponsor.
g. Sponsored company will be honored with a Plaque by the Conference Patron at the Opening Ceremony.
h. Executive Officers will be treated as VIPs during the event and official lunches and dinner.
i. Company logo size 2 m x 2 m will be displayed in the conference hall along with the conference banner and outside lobby.
j. Company name and logo will be published in the conference proceedings.

3) GOLDEN SPONSOR US$ 20,000


a. Company name and logo will be published in all the conference publicity materials as Golden Sponsor.
b. Entitled for six sq. meter stand space with stand fittings at the exhibition hall.
c. Two delegates from the sponsoring company may attend the conference with full package free of charge.
d. Publicity materials will be included in the conference pack.
e. Company name and logo with a brief profile will be published in the conference web site which shall be connected to the Sponsors web site.
f. A half page advertisement shall be provided in the Exhibition Guide for the Golden Sponsor.
g. Sponsored company will be honored with a Plaque by the Conference Patron at the opening ceremony.
h. Executive Officers will be treated as VIPs during the event and at the official lunches and dinner.
i. One banner size 1.5 m x 1.5 m will be displayed in the conference hall, lobby and exhibition hall.
j. Company name and logo will be published in the conference proceedings.

45 www.ampt2014.com
4) SILVER SPONSOR US$ 15,000
a. Company name and logo will be published in all conference publicity materials as Silver Sponsor.
b. One delegate from the sponsoring company may attend the conference with full package free of charge.
c. Publicity materials will be included in the conference pack.
d. Company name and logo with a brief profile will be published in the conference web site which shall be connected
e. to the Sponsors web site.
Executive Officers will be treated as VIPs during the event and at the official lunches and dinner.
f. Sponsored company will be honored with a Plaque by the Conference Patron at the opening ceremony.
g. One banner size 1 m x 1 m will be displayed in the conference hall.
h. Company name and logo will be published in the conference proceedings.

5) Conference Diner Sponsor US$15,000


a. Company name and logo will be published in all the conference publicity materials as Dinner Sponsor.
b. Entitled for eight sq. meter stand space with stand fittings at the exhibition hall.
c. Three delegates from the sponsoring company may attend the conference with full package free of charge.
d. Publicity materials will be included in the conference pack.
e. Company name and logo with a brief profile will be published in the conference web site which shall be connected to the Sponsors web site.
f. A half page advertisement shall be provided in the Exhibition Guide for the Golden Sponsor.
g. Sponsored company will be honored with a Plaque by the Conference Patron at the opening ceremony.
h. Executive Officers will be treated as VIPs during the event and at the official lunches and dinner.
i. Extra 5 additional Invitations will be provided for Dinner
j. One banner will be displayed at the Dinner Venue.

6) Luncheon Sponsor US$ 13,000


a. Company name and logo will be published in all the conference publicity materials as Luncheon Sponsor.
b. Entitled for six sq. meter stand space with stand fittings at the exhibition hall.
c. Three delegates from the sponsoring company may attend the conference with full package free of charge.
d. Publicity materials will be included in the conference pack.
e. Company name and logo with a brief profile will be published in the conference web site which shall be connected to the Sponsors web site.
f. A half page advertisement shall be provided in the Exhibition Guide for the Golden Sponsor.
g. Sponsored company will be honored with a Plaque by the Conference Patron at the opening ceremony.
h. Executive Officers will be treated as VIPs during the event and at the official lunches and dinner.
i. Extra 3 additional Invitations will be provided for Lunch.
j. One banner will be displayed at the Lunch Venue.

www.ampt2014.com 46
Advances in Materials & Processing Technology Conference

Exhibition Stand Booking Form


Company ............................................................................................................................................................................................

Contact Person....................................................................................................................................................................................

Mailing Address ..................................................................................................................................................................................

City.............................................................. Country ........................................................ Postal Code..............................................

Tel: ...................................................... Fax .......................................................... Email.....................................................................

Signature ............................................................................................... Date ....................................................................................

OUR COMPANY IS GOING TO SPONSOR


THE FOLLOWING CONFERENCE EXPENSES

Platinum Elite Sponsor US$100,000

Platinum Sponsor US$50,000

Gold Sponsor US$20,000

Silver Sponsor US$15,000

Conference Dinner US$15,000

Luncheon US$13,000

Exibition Stand US$5,000

To co-sponsor the Conference and Exhibition


Please complete this form and e-mail to
Contact:
Mohammad Al-Jafar
Mohammad.aljafar@saudiasm.org
+966 500885999

Payment may be made by Bank Draft / Cheque payable to:

Account Name : Knowledge Awareness EXPO Technical Services


IBAN : SA0915000921116934540003
SWIFT: ALBISARI
Bank Name : BANK ALBILAD, Al-Khobar, Saudi Arabia

Event Organizer: Knowledge Awareness EXPO Technical Services


Phone/Fax: +966 13 8452688/ +966 13 8452777
Mobile +966 55 956 8149
Email:info@kats-sa.com
Web: www.kats-sa.com

47 www.ampt2014.com
Conference Registration Fee
CONFERENCE
EARLY REGISTRATION LATE REGISTRATION
CATEGORY
$ US $ US
Student Delegates 400 400
All Other Delegates 650 680

Registration fees will entire the participant to a copy of the conference proceeding and function. refreshment, and
attendant at the conference banquet.

www.ampt2014.com 48
Advances in Materials & Processing Technology Conference

Sponsors for AMPT2014 Conference.

We have assembled an extensive list of sponsors /exhibitors from the region and expect to incorporate more potential
sponsors/exhibitors soon.
We believe the level of potential sponsors will be significant to ensure dialogue between academia and industry

49 www.ampt2014.com
Advances in Materials and Processing Technologies
www.ampt2014.com

You might also like