Professional Documents
Culture Documents
Fast Dormancy
Feature ID: ZWF21-01-027
Version: V3.11.10
ZTE CORPORATION
NO. 55, Hi-tech Road South, ShenZhen, P.R.China
Postcode: 518057
Tel: +86-755-26771900
Fax: +86-755-26770801
URL: http://ensupport.zte.com.cn
E-mail: support@zte.com.cn
LEGAL INFORMATION
Copyright 2012 ZTE CORPORATION.
The contents of this document are protected by copyright laws and international treaties. Any reproduction or
distribution of this document or any portion of this document, in any form by any means, without the prior written
consent of ZTE CORPORATION is prohibited. Additionally, the contents of this document are protected by
contractual confidentiality obligations.
All company, brand and product names are trade or service marks, or registered trade or service marks, of ZTE
CORPORATION or of their respective owners.
This document is provided as is, and all express, implied, or statutory warranties, representations or conditions
are disclaimed, including without limitation any implied warranty of merchantability, fitness for a particular purpose,
title or non-infringement. ZTE CORPORATION and its licensors shall not be liable for damages resulting from the
use of or reliance on the information contained herein.
ZTE CORPORATION or its licensors may have current or pending intellectual property rights or applications
covering the subject matter of this document. Except as expressly provided in any written license between ZTE
CORPORATION and its licensee, the user of this document shall not acquire any license to the subject matter
herein.
ZTE CORPORATION reserves the right to upgrade or make technical change to this product without further notice.
Users may visit ZTE technical support website http://ensupport.zte.com.cn to inquire related information.
The ultimate right to interpret this product resides in ZTE CORPORATION.
Revision History
R8 Fast Dormancy:
3GPP Release 8 introduces a simple UE signaling to indicate the state of UE for the
network. A new UE "Signaling Connection Release Indication Cause" indicates that
the UE has decided to stop an activated PS data transmission. On receiving the IE,
UTRAN can decide to trigger an RRC state handover to URA_PCH or IDLE to save
battery consumption. The network can control the using of this function by configuring
and sending a timer in SIB1 which regulates that this function is forbidden within a period
of T323.There is a parameter T323Swch to control whether configure T323 in SIB1.
Without receive T323, UE would not sending SCRI with cause UE requested PS data
session end.
Note:
1-1
1. The UE shall be inhibited from sending the SCRI message with the IE "Signalling
Connection Release Indication Cause" set to "UE Requested PS Data session end"
whilst timer T323 is running.
2. According to 3GPP 25.331, when timer T323 expires, if it still meets the condition
for reporting SCRI message, the UE will trigger the transmission of a SCRI message
again. But some tests confirm that some UEs will not report SCRI message again
when timer T323 expires.
1-2
Hardware Requirement
NE Requirement
RNC None
NodeB None
Software Requirement
GGSN NO
HLR NO
Topology
Topology is shown in Figure 2-1.
2-1
2-2
MSC/MGW - ZTE
N/A
HLR - ZTE
UE1 subscribe background 2mbps/2mbps
RAB_AssignmentRequestMsg.rAB_SetupOrModifyList.elem[0].rAB_SetupOrModifyItem
First.rAB_Parameters.trafficClass = TRANAP_background
RAB_AssignmentRequestMsg.rAB_SetupOrModifyList.elem[0].rAB_SetupOrModifyItem
First.rAB_Parameters.maxBitrate.elem[0] = 2048000
RNC
Parameters setting in the RNC
- Switch of T323 Broadcasting: On
3-1
Path: View > Configuration Management > RNC Managed Element > RNC Radio
Resource Management > Modify Advanced Parameter > UE Timers and Constants
Information > Switch of T323 Broadcasting
-DRBC Method Switch: UL Closed &DL Closed
Note:
Because SCRI is not easily triggered, so we closed DRBC switch to avoid state transfer
from CELL_DCH to IDLE triggered by E4B. Then we can have enough time to trigger SCRI.
Path: View > Configuration Management > RNC Managed Element > RNC Radio
Resource Management > Logical RNC Associated With PLMN Configuration
Information > Logical RNC xxx > Modify Advanced Parameter > Dynamic Radio
Bearer Control Information > DRBC Method Switch
Node B
N/A
3-2
4-1
4-2
5-1