Date: Model: Service Engineer: Serial No.: Customer: Interval: Contract No.: Expiration Hour:
ALL Performance check should be done in POWER mode
Inspection Item Result Operation HEX & WEX 1. Check All LCD/LED and Lamp is turned off after two seconds lightening at Key On Position. Good / Bad 2. Check Hour Meter is working. Good / Bad 3. Check only E/G Oil Pressure and Battery Charging Lamp is lightening at Key On. Good / Bad 4. Check All Lamp is working. Good / Bad 5. Check Wiper function is working. Good / Bad 6. Check LCD Commnuication is working (Flash Symbol). Good / Bad 7. Check A/C is working. Good / Bad 8. Check Any Oil Leakage at Roller, Idler, Radiator, Piping, Engine & Hydraulic Area. Good / Bad 9. Check Any Crack at Front (Boom, Arm) and Frame. Good / Bad 10. Check rear combination lamp is working (Turn signal, ....). Good / Bad 11. Check T/M and Axle oil level ( In spec.). Good / Bad 12. Check parking is firmly working. Good / Bad 13. Check pilot cut off condition. Good / Bad Power Train WEX 14. Check transmission pressure ( Low/ High/ Parking). Good / Bad 15. Check traveling speed changing ( Low/ High). Good / Bad 16. Check intermediate shaft. Good / Bad 17. Check oil leakage from differential. Good / Bad 18. Check T/M oil level. Good / Bad 19. Check differential oil level. Good / Bad Electric System 20. Check Battery Voltage ( Key off condition). Good / Bad 21. Check Battery Voltage ( Idling condition). Good / Bad 22. Check Fuse melting. Good / Bad 23. Check Power mode ( Propotional valve) working condition. Good / Bad 24. Check auto idle switch ( front/ travel) is working. Good / Bad 25. Check error code with DMS. Good / Bad 26. Check E/G starting is available when T/M selector lever is not neutral. Good / Bad Engine Performance 27. Check Engine Makes Smoke. 28. Check E/G RPM. 29. Check Load RPM ( Pump Relief). 30. Check low engine RPM. 31. Check auto idle speed. 32. Check fan belt tention and belt condition. Good / Bad 33. Check engine oil level ( In Spec.). Good / Bad Inspection Item Result Hydraulic system 34. Check Front Relief Pressure 35. Check Pressure Up Relief 36. Check Swing Pressure 37. Check traveling pressure 38. Check Pilot Pressure 39. Check Steering relief Pressure 40. Check Brake Pressure Performance 41. Check Boom Up/Down Speed 42. Check Arm Crowd/Dump Speed 43. Check BKT Crowd/Dump Speed 44. Check Dozer Up/Down Speed 45. Check Outrigger Up/Down Speed 46. Check Swing Speed (3 Revolution) 47. Check Boom Cyl Front Creep (At Weighted BKT) 48. Check Arm Cyl Front Creep (At Weighted BKT) 49. Check BKT Cyl Front Creep (At Weighted BKT) 50. Check Dozer Cyl Front Creep (At Weighted BKT) 51. Check Outrigger Cyl Creep
Repair & Tuning
Special Issue
Customer Opinion
Service Engineer Customer
Name Signature Name Signature
Files to be attached: 1) Photo of sticker 2) mon. utd. grp file (one each) 3) invoice