You are on page 1of 1

Downloaded from http://iranpaper.

ir
http://www.itrans24.com/landing1.html

118

Principles of Adsorption and Adsorption Processes presented require further analyses and experimental
by D. M. Ruthven; published by John Wiley and Sons proofs. Although the influence of particular parameters
Ltd., Chichester, 1984; 433 pp. is investigated, in most cases using analytical solutions
of the differential equations, no consolidated model
The intention of the author, D. M. Ruthven, was, as for adsorption column dynamics regarding all parameters
can be gathered from the title, to give a consolidated is offered. For this reason, a decision as to whether the
review of both fundamental physical principles of ad- simpler models discussed by Ruthven might be sufficient
sorption processes and their industrial use as purifica- to calculate the breakthrough curves and design the ad-
tion and separation processes. sorption process remains difficult.
The contents of the book follow the way an adsorp- Nevertheless, the book ought to be read by every
tion separation process is to be designed. The author engineer or chemist engaged in research or development
begins by presenting practical adsorbents, describing the of adsorption separation processes.
zeolites in detail. He then attempts to calculate the W. KAST
forces involved in physical adsorption and gives a review
of the models known to represent the isotherms of
physical adsorption.
For the thermodynamic study of equilibrium Ruthven Taschenbuch der Kunststoff-Priiftechnik
uses two approaches, the classical thermodynamic ap- von Roger P. Brown; die deutsche Ausgabe besorgte
proach following Gibbs, leading to the introduction of Dr.-Ing. Dipl.-Phys. Bodo Carlowitz; Carl Hanser
spreading pressure as the appropriate intensive variable, Verlag, Miinchen, 1984; 499 Seiten, 151 Bilder,
and a statistical thermodynamic approach particular!y 24 Tabellen; Kunststoffeinband DM 118.
suited to zeolites.
Discussing the transport phenomena in porous ad- Das Taschenbuch der Kunststoff-Priiftechnik stellt
sorbents, the author distinguishes between micropore fiir jeden Kunststoff-Fachmann ein in seiner Art wohl
diffusion, in which true driving force is the gradient of einmaliges Hilfsmittel dar. Dieses Buch eriiffnet eine
the chemical potential, and therefore the diffusivity is Reihe neuer Aspekte fiir die Priifung von Kunststoffen
dependent on the concentration and macropore diffu- und enthllt eine solche Fiille von praxisnahen Methoden
sion, occurring only by molecular diffusion with con- und wertwollen Hinweisen wie sie in dieser konzen-
stant diffusivity, where the concentration dependence trierten Darstellung bisher in der Fachliteratur nicht zu
of the transport process can be derived from a differ- finden war.
ential mass balance on a spherical shell element. This Neu ist vor allem das Hervorheben der genormten
latter statement is not true in general, since it was shown Priifverfahren und die Verkniipfung der in den jeweils
that transport processes in the adsorbed phase may also nationalen Normen enthaltenen Prinzipien mit den
appear in macropores. The analysis of non-isothermal Ergebnissen der internationalen Normung im Rahmen
sorption in a single particle is restricted to a diffusion der IS0 (International Standard Organisation).
model with a linear equilibrium relationship. Wegen ihrer besonderen praktischen Bedeutung wird
Concerning the dynamics of adsorption, Ruthven dieser Thematik in diesem neuen Taschenbuch erste
emphasizes that it is the overall dynamics of the packed Priorit& eingersumt, denn es ist ja in der Priif- und
bed system, rather than the adsorption kinetics for a Anwendungstechnik haufig notwendig, gerade Produkte
single particle, which controls the process. Ruthven, verschiedener Herkunft zu vergleichen, wenn ein opti-
therefore, starts with the most simple model for column maler Werkstoffeinsatz gewtirleistet werden ~011.
behaviour, assuming equilibrium between fluid phase Diese Vergleichbarkeit wird hergestellt bzw. erleicht-
and adsorbed phase concentrations. The solution shows ert wenn die fiir eine bestimmte Eigenschaft herange-
how the basic pattern of the behaviour of the system zogenen jeweiligen national Normen untereinander
depends on the form of the equilibrium isotherm. Ana- verglichen und bewertet werden kijnnen. Es werden
lytical solutions without neglecting finite mass transfer daher in diesem ganz praxisbezogenen Taschenbuch
resistance are presented for linear equilibrium and soweit nur irgend miiglich neben den ISO-Normen such
irreversible equilibrium, while the constant pattern be- immer die entsprechenden deutschen, britischen und
haviour for favourable isotherms is demonstrated. A amerikanischen Normen kurz beschrieben und ihre
survey of models is given both for single-transition and Abweichungen und Besonderheiten extra herausgestellt.
multiple-transition systems, that is, systems with more So wird der Leser dieses Buches such aus einer Fiille
than one adsorbable component or non-isothermal von Hinweisen auf ihm vielleicht noch nicht bekannte
systems. Normen und Verfahren vielfdtige Anregung und kon-
The last part of the book is given over to a survey of krete Hilfe fiir seine tiigliche Arbeit schbpfen kiinnen.
chromatographic separation processes, industrial cyclic Neben der sehr aktuellen Darstellung der wichtigsten
batch processes, including consideration of regeneration Kunststoff-Priifmethoden fiir die Qualitlts- und Entwick-
methods, and continuous countercurrent processes, lungspriifungen wurden such Methoden der Polymer-
including calculations similar to other continuous charakterisierung und der Alterungspriifung ausfiihrlich
countercurrent operation design methods. beschrieben. Die Zusammenstellung bevorzugter Ptif-
The book is a good summary of the anglo-american methoden fiir die wichtigsten Kunststoffgruppen geben
publications, and represents the latest state of knowl- schliesslich einen Anhalt fiir die eigene Gestaltung von
edge of adsorption processes, but in detail the models praxisgerechten Priifprogrammen.

You might also like