You are on page 1of 4

GSM TO PSTN Converter

G200PT

Description
G200PT gives you both a reduced phone bill and a convenient phone conversation. It can replace
the CALL FORWARDING SERVICE of PSTN to reduce the cost of PSTN-to-Mobile call with
Mobile-to-Mobile call.

Feature
— Conversion of wire & wireless communication
— Auto-select economic route (LCR)
— With LCD display for easy programming
— Code Conversion Setting: Through the connection towards local PSTN line, the phone calls will
proceed with code-transfer dialing process
— Volume modulating setting (1 - 5)
— Polarity reversing function and 12 KHz built in
— Definition of DTMF reversing signal
— Limit of communicating time
— GSM function of dialing out the prompt voice
— When not connecting to Telephone Office line, GSM will provide the forced dial-out function
— Set up GSM extra dialing local code
— Set up extra dialing local-code to PSTN
— GSM isn't ready, call will be forced to dial out from PSTN
— Setting of Dialing type Call-Transfer:
PSTN TO GSM, GSM TO PSTN, GSM call-
Transfer setting time to PSTN out, DTMF definition of reversed signal
GSM Frequency bands: Dual Band
EGSM 900 and DCS 1800 MHz
GSM 850/900/1800/1900 MHz (optional)
— Specific Call Transfer setting:
GSM to PSTN: Assign mode (one stage dialing)
Free mode (two stage dialing)
PSTN to GSM: An Incoming call will be transferred to specify GSM Number
— Call Transfer Restriction Setting (10 sets)
— Short Code Setting (100 sets)
GSM TO PSTN Converter
G200PT
— GSM Prefix No Setting (30 sets)
— Support Call ID Dual Mode (FSK + DTMF)
— Siemens TC-35 GSM Module
— SIM Card Pin code disable/enable

Application
1. To be a PABX Extension:
For example: When you set “PSTN TRANSFER TO” GSM number: 138xxxxxxxx, If someone is calling the phone
which connected with converter from PSTN line, the call will be transferred to GSM mobile phone. Suppose that the
GSM mobile phone is rejected receiving the call, then the call will be returned to the telephone

2. To be Least Cost Router:


For example: If you choose “PSTN/GSM” mode and set “Set GSM Dial code” prefix number is 9, it means when user

dialing 9xxxxxxxx, calls will be sent out from GSM line. Dialing other prefix number will be sent out from PSTN line
GSM TO PSTN Converter
G200PT
3. To be a Mobile Call Transfer Box:
For example:
1. When you set “PSTN TRANSFER TO” GSM number: 138xxxxxxxx, If someone is calling the phone which
connected with converter from PSTN line, the call will be transferred to GSM mobile phone. Suppose that the GSM
mobile phone is rejected receiving the call, then the call will be returned to the telephone.
2. When you set “GSM to PSTN” and select “Enable Assign” mode. If someone calls SIM card number of the converter,
the converter will transfer the call to an appointed PSTN number.
3. When you set “GSM to PSTN” and select “Enable Free” mode. If someone calls SIM card number of the converter,
the converter will give a “Beep” sound to prompt caller and let caller to call the destination PSTN number

Specifications
Air Interface Standard Connectors
GSM900M/1800M phase 2+ • Two RJ-11 interface jacks for telephone,
Frequency Ranges • SMA connector for antenna
Transmit Receive • DC power input jack
• GSM900M 890-915 MHz 935-960 MHz Antenna
• GSM1800M 1710-1785 MHz 1805-1880 MHz • 2.5dB (Omni directional) with 3m wire
Channel Space: 200khz • Optional higher gain antennas
Environment AC-to-DC Switching Power Supply
• Operating temperature range: -10°C to + 50°C • Input Voltage: 110 - 230 VAC
• Storage temperature range: -40°C to + 60°C • Frequency: 50/60 Hz
• Humidity: 5% to 95% (non-condensing) • Output Voltage: 7.5VDC
LED Indicators: Power and network status
GSM TO PSTN Converter
G200PT

Eltech Communications Co., Ltd.


Buji Town, Shenzhen, China
Tel: +86-755-89971281
Fax: +86-755-84723552
www.eltechcom.com
Sale email: fiber@vip.163.com

Copyright © 2007 Eltech Communications Co., Ltd. All rights reserved.

Specifications and pictures are subject to change without prior notice.

You might also like