Professional Documents
Culture Documents
Model No : ZL-Z24BGC13
Spec No : ZZ-GY-S0584A
Descriptions:
7.6*7.6 Piranha Type
Stopper
ATTENTION
OBSERVE PRECAUTIONS
ELECTROSTATIC
SENSITIVE DEVICES
-1-
Dimension Drawing Applications:
Toys
Automotive Exterior Lighting
-2-
*pulse width 0.1msec duty 1/10
25)
Typical Electrical & Optical Characteristics ( Ta = 25
Rank ---
Rank 0F 0G 0H 0J 0K 0L
Important Notes:
1) All ranks will be included per delivery.
2) Tolerance of measurement of luminous intensity is 15%.
3) Tolerance of measurement of dominant wavelength is 1nm.
4) Tolerance of measurement of forward voltage is 0.05 V.
5Pb content1000PPM.
-3-
Typical Electrical/ Optical Characteristics Curves
(Ta=25C Unless Otherwise Noted)
Half Wide=35nm
Iv Domi WL=515nm If (mA)
1.0 100
0.8 80
0.6 60
0.4 40
0.2 20
400 450 500 550 600 650 3.0 3.3 3.6 3.9 4.2 4.5
Fig.1 Relative Luminous Intensity vs. Wavelength Fig.2 Forward Current vs. Forward Voltage
Iv If (mA)
5.0 50
4.0 40
3.0 30
2.0 20
1.0 10
0.0 If (mA) 0 Ta ()
0 20 40 60 80 100 0 20 40 60 80 100
Fig.3 Relative Luminous Intensity vs. Forward Current Fig.4 Maximum Forward Current vs.Ambient Temperature
-10.0
1.0
-20.0
0.5
-30.0
-40.0 0.2
-50.0 0.1 Ta ()
Ir (uA) -30 -20 -10 0 10 20 30 40 50 60 70
Fig.5 Reverse Current vs.Reverse Voltage Fig.6 Relative Luminous Intensity vs.Ambient Temperature
-4-
Package Specification:
LABEL
Inside(bag)
SPEC
LABEL
Box B
50.0
Box A
27.5
Each box B contains 8 boxes A 47.0
11.0
.0
2
2
26.0
NOTE:
1) The LED shall be used under allowed conditions. ZhongzhouOpto.cannot take any responsibility for any
troubles that are caused by using the LEDs at conditions exceeding our specifications.
2) The LED must be used as soon as tore open, otherwise the plank will be oxygenated.
3)The BlueGreenWhite products shall be care of the static electricity.
4)3.0mm From Body For 3 Seconds below 260.
Please avoid the soldered LEDs from clashing or librating before the lens temperature cool down.
5) The circuit shall be designed according to certain current or relative operating voltage.
6) These LEDs are designed and manufactured for standard applications such as electric home appliances,
communication equipment, office equipment, electronic instrumentation and so on. It is recommended to
consult with ZhongzhouOpto. in advance if users application requires any particular quality or reliability that
concerns human life. Examples would be medical equipment, aerospace applications, traffic signals, safety
system equipment and so on.
7) We reserve the right to make technical changes without prior notice.
8) All the content interpretation reserved to zhongzhouOpto.
-5-
-6-