Professional Documents
Culture Documents
8. A fin of cross section area 1.75 cm2, perimeter 2.25 cm, 125 cm long are maintained at
127 0C and 227 0C respectively at the ends. It losses heat from the surface due to natural
convection to the surroundings at 25 0C with the heat transfer coefficient of 7 W/m2K.
The thermal conductivity of fin material is 50 W/m K. Find the temperature distribution
in the fin. Compare the finite difference solution with analytical solution and tabulate
both the values.
9. a) Derive the second order accurate forward and backward up winding schemes for
/x.
b) Derive the Quasi one dimensional compressible flow equations for flow through a
nozzle. Explain the method of capturing the shock in dealing with the nozzle flows.
(a) How the oblique incidence fringe pattern provides additional data which can be
employed to separate the principal stresses?
(b) Dynamic recording at very high frequencies
(c) What is the effect of poor thickness control during the application of a resin based
brittle coating.
9. a) Explain the displacement field approach to moir fringe analysis.
b) What are isoclinics? Discuss their significance .
Mechanical Vibrations
Fig. 1. Fig. 2.
Fig. 3
1. What is Burmesters Curve? Explain in detail how Burmesters curve will be drawn
for a 4 bar mechanism.
3. Design a four bar mechanism which is required such that the crank angles will be co-
ordinated as follows and also find the lengths of links?
0 0 0
a. degrees 70 30 0
b. degrees 750 45
0
20
What is path generation? Explain Roberts theorem with a suitable example.
b) Explain the terminology of Halls equation . What is its significance in plane motion ?