[Next] Up] Previous
Next: Rankine Oval Up: Superposition of Elementary Flows Previous: Superposition
f Elementary Flow:
Uniform Flow and a Source
Let us now place a source in the path of a uniform flow. The stream function and the
velocity potential for the resulting flow are given by adding the two stream functions
and velocity potentials as follows,
y= Wor + vs
; m
= Ursin? + road (4.89)
% = duF + os
= Usgreos8 + Slur (4.90)
One of the interesting features to determine for the resulting force is the stagnation
point of the flow, i.e., where the velocity goes to zero.
One could calculate this from the equations. It is clear that for this flow the
stagnation point will occur on the x-axis, The location can be arrived at purely
intuitionally. The source produces a radial flow of magnitude
we
ar
while the uniform flow produces a velocity of U in the positive x-direction. When
these two cancel out at a point we have the stagnation point. A negative radial flow
that can cancel the uniform flow is possible only to the left of the x-axis, say at x = -
b. Hence,
m
Un =
nb
leading to
m
ore Dale (4.91)
‘Atx = -b, we have @ = 7 andr = b, Substituting these values in the expression for
u;, ie., Eqn. 4.89 we get the value of 7 at the stagnation point to be
(4.92)m
Yate = F
‘An equation to the streamline passing through the stagnation point, i.e,, stagnation
streamline is obtained as follows,
F = Usorsin® + beo6
But mm = 2 aUagb, hence
Ucot = Ucor sin + bUeo8
leading to
on — 8)
ra oy = Oe - 8) (4.93)
> Ot CBC
Figure 4.24: Flow about Rankine Half Body
The streamlines for this flow are sketched in Fig.4.24. It is clear that we can make
the stagnation streamline the solid body. In fact any streamline of a flow can be
treated as a solid body since there is no flow across it. In the present example if we
ignore the streamlines inside the "body" we have described the flow about a solid
body given by Eqn. 4.25. This body is referred to as a Rankine Half Body as it is
“open at the right hand end.
Limits of @ for this body are 0 and 27. At these values we have y approaching
sib, which is called the Half Width of the body.y=b(x - 6)
4
Figure 4.25: Sketch of Flow about Rankine Half Body
The velocity components for this flow are given by
m
u, = Usyeosd + sr (4.94)
ve = — Ueo sind (4.95)
The square of velocity reduces to
2 2 :
If the pressure in the free stream is Doo it follows from Bernoulli Equation that,
1 1
Poo + 5PUay + PO% = P+ 5pV? + page (4.97)
which enables us to calculate the pressure. Usually in aerodynamic applications
Involving significant velocities and pressures any contribution due to elevation
changes is negligible. The equation for pressure assumes a simple form,
1 1
Peo + 3c =pt xev? (4.98)
Itis left as an exercise for the student to show that the maximum velocity over the
surface of the body occurs at the location @ = 63° and is approximately equal to
1.26U oo.
[Next] Up] Previous
Next: Rankine Oval Up: Superposition of Elementary Flows Previous: Superposition
of Elementary Flows(c) Aerospace, Mechanical & Mechatronic Engg. 2005
University of Sydney