Professional Documents
Culture Documents
ENHANCED SECURITY
I ADJUSTMENT/SETTING
6. ENHANCED SECURITY
6.1 List of Enhanced Security
6.2 Starting/Exiting
6.2.1 Starting procedure
1. Call the Service Mode to the screen.
2. Press the following keys in this order.
Stop -> 0 -> Clear
3. Select a mode.
I-1
bizhub 367/287/227 I ADJUSTMENT/SETTING > 6. ENHANCED SECURITY
(3) Procedure
Enter the CE password (8 digits) on the on-screen keyboard.
1. Current Password: Enter the currently using CE password.
2. New Password: Enter the new CE password.
3. Re-Input Password: Enter the new CE password again.
NOTE
When [Administrator Settings] -> [Security Settings] -> [Security Details] is set to [ON], new passwords cannot contain the same
string of characters nor can be previous passwords be used.
A new password is set when starts from the service mode after changing.
NEVER forget the CE password. When forgetting the CE password, call responsible person of KM.
(3) Procedure
Enter the administrator password on the on-screen keyboard.
1. New Password: Enter the new administrator password.
2. Re-Input Password: Enter the new administrator password again.
NOTE
When [Administrator Settings] -> [Security Settings] -> [Security Details] is set to [ON], new passwords cannot contain the same
string of characters nor can be previous passwords be used.
I-2
bizhub 367/287/227 I ADJUSTMENT/SETTING > 6. ENHANCED SECURITY
6.3.4 CE Authentication
If [Administrator Settings] -> [Security Settings] -> [Security Details] is enabled, this displays as "Disabled".
It will be displayed when [Administrator Settings] -> [Network Settings] -> [Remote Panel Settings] -> [Client Settings] is set to ON.
(1) Use
To determine whether or not to authenticate CE password as entering Service Mode.
NOTE
For setting the [Password Rules] to ON, set the CE Authentication to ''ON''.
Change the initial CE password beforehand.
Before setting the [Remote Panel Settings] to ON, set the CE Authentication to ''ON''.
(2) Procedure
1. Touch [Memory Data Backup].
2. Touch [Start] to start making a backup.
3. Check the message [Backup is completed.], and turn main power switch OFF. Wait for ten seconds or more and turn main power switch
back ON.
I-3
bizhub 367/287/227 I ADJUSTMENT/SETTING > 6. ENHANCED SECURITY
(2) Procedure
1. Touch [Administrator unlocking].
2. Touch [unlocking] to release an access lock.
3. When [OK] is displayed, touch [OK].
(1) Use
To make printer engine settings.
The following table shows DIP switches that can be set in this machine.
Switch No. Function Ref. page
1 Toner bottle capacity setting (5K) I.6.3.9.(3).(a) Toner bottle capacity setting (5K)
2 Toner bottle capacity setting (10K) I.6.3.9.(3).(b) Toner bottle capacity setting (10K)
3 New Release Disable mode I.6.3.9.(3).(c) New Release Disable mode
4 Ventilation option I.6.3.9.(3).(d) Ventilation option
5 Not used -
6 Not used -
7 Toner amount option I.6.3.9.(3).(e) Toner amount option
8
9 Choice of paper size detection at Bypass tray I.6.3.9.(3).(f) Choice of paper size detection at Bypass tray
10 Not used
: -
16
17 FS-534/PK-520 Punching Noise Reduction Choice I.6.3.9.(3).(g) FS-534/PK-520 Punching Noise Reduction
Choice
18 Choice of FS-533 tray home position switching I.6.3.9.(3).(h) Choice of FS-533 tray home position switching
19
: Not used -
26
27 USB log option I.6.3.9.(3).(i) USB log option
28 Not used
: -
56
(2) Procedure
1. Touch [Engine FW DipSW].
2. Touch the key that corresponds to the switch No. of the function to be set and check the key is highlighted (ON state) in reverse video.
3. Touch [OK].
I-4
bizhub 367/287/227 I ADJUSTMENT/SETTING > 6. ENHANCED SECURITY
5. Touch [END].
5. Touch [END].
6. Displays the [Imaging Process Adjustment] screen.
7. Press the Start key to validate the adjustment value.
NOTE
The adjustment to this setting is updated by outputting the test print to the [Imaging Process Adjustment] screen.
I-5
bizhub 367/287/227 I ADJUSTMENT/SETTING > 6. ENHANCED SECURITY
ON Control the punching force of the punch motor depending on the paper thickness (basic weight). For paper other than
the thick paper, 60% force is applied for punching holes. (Default value)
Control the operating noise generated when punching holes on the paper other than the thick paper.
Procedure
1. Call the Service Mode to the screen.
2. Call the Enhanced Security to the screen.
3. Touch [Engine FW DipSW].
4. Touch [17] and check the key is highlighted (ON state) in reverse video.
5. Touch [END].
I-6
bizhub 367/287/227 I ADJUSTMENT/SETTING > 6. ENHANCED SECURITY
(3) Procedure
NOTE
Set [Administrator Settings] [Security Setting] -> [Security Details] -> [Storage Data Backup (5/5)] to [Allow].
If [Restrict] is set, the machine cannot be used.
Be sure to turn the main power switch of the machine off and on after performing a backup/restore.
(a) Backup
1. Connect the USB of an external HDD to the USB port of an MFP. (USB NG will be displayed when the USB is not recognized correctly.)
2. Call the Service Mode to the screen.
3. Call the Enhanced Security to the screen.
4. Touch [HDD Data Backup].
5. Select [Generic format Backup] or [KM Format Backup].
6. Touch [Enter Password], enter an encryption password using 1 to 32 characters, then touch [END].
7. Touch [Start]. (Processing will be displayed.)
Touch [Cancel] if you want to stop the backup.
8. After completing the backup, [Result OK] will be displayed.
I-7
bizhub 367/287/227 I ADJUSTMENT/SETTING > 6. ENHANCED SECURITY
(b) Restore
1. Connect the USB of an external HDD to the USB port of an MFP.
2. Call the Service Mode to the screen.
3. Call the Enhanced Security to the screen.
4. Touch [HDD Data Backup].
5. Select [Restore].
6. Touch [Enter Password], enter a decryption password using 1 to 32 characters, then touch [END].
7. Touch [Start]. (Processing will be displayed.)
Touch [Cancel] if you want to stop the restore.
8. After completing the restore, [Result OK] will be displayed.
9. Turn OFF and ON the main power switch.
(1) Initialization
(a) Use
To initialize the memory area installed on the TPM chip.
NOTE
Be sure to perform it if the i-Option LK-115 is enabled.
(b) Procedure
1. Touch [Initialization].
2. Press the Start key.
I-8